/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static int sg_debug = 0; #ifdef DEBUG #define DCMNERR if (sg_debug) cmn_err #else #define DCMNERR #endif int (*p2get_mem_unum)(int, uint64_t, char *, int, int *); /* local functions */ static void cpu_sgn_update(ushort_t sgn, uchar_t state, uchar_t sub_state, int cpuid); /* * Local data. * * iosram_write_ptr is a pointer to iosram_write(). Because of * kernel dynamic linking, we can't get to the function by name, * but we can look up its address, and store it in this variable * instead. * * We include the extern for iosram_write() here not because we call * it, but to force compilation errors if its prototype doesn't * match the prototype of iosram_write_ptr. * * The same issues apply to iosram_read() and iosram_read_ptr. */ /*CSTYLED*/ extern int iosram_write (int, uint32_t, caddr_t, uint32_t); static int (*iosram_write_ptr)(int, uint32_t, caddr_t, uint32_t) = NULL; /*CSTYLED*/ extern int iosram_read (int, uint32_t, caddr_t, uint32_t); static int (*iosram_read_ptr)(int, uint32_t, caddr_t, uint32_t) = NULL; /* * Variable to indicate if the date should be obtained from the SC or not. */ int todsg_use_sc = FALSE; /* set the false at the beginning */ /* * Preallocation of spare tsb's for DR * * We don't allocate spares for Wildcat since TSBs should come * out of memory local to the node. */ #define IOMMU_PER_SCHIZO 2 int serengeti_tsb_spares = (SG_MAX_IO_BDS * SG_SCHIZO_PER_IO_BD * IOMMU_PER_SCHIZO); /* * sg_max_ncpus is the maximum number of CPUs supported on Serengeti. * sg_max_ncpus is set to be smaller than NCPU to reduce the amount of * memory the logs take up until we have a dynamic log memory allocation * solution. */ int sg_max_ncpus = (24 * 2); /* (max # of processors * # of cores/proc) */ /* * variables to control mailbox message timeouts. * These can be patched via /etc/system or mdb. */ int sbbc_mbox_default_timeout = MBOX_DEFAULT_TIMEOUT; int sbbc_mbox_min_timeout = MBOX_MIN_TIMEOUT; /* cached 'chosen' node_id */ pnode_t chosen_nodeid = (pnode_t)0; static void (*sg_ecc_taskq_func)(sbbc_ecc_mbox_t *) = NULL; static int (*sg_ecc_mbox_func)(sbbc_ecc_mbox_t *) = NULL; /* * Table that maps memory slices to a specific memnode. */ int slice_to_memnode[SG_MAX_SLICE]; plat_dimm_sid_board_t domain_dimm_sids[SG_MAX_CPU_BDS]; int set_platform_tsb_spares() { return (MIN(serengeti_tsb_spares, MAX_UPA)); } #pragma weak mmu_init_large_pages void set_platform_defaults(void) { extern int watchdog_enable; extern uint64_t xc_tick_limit_scale; extern void mmu_init_large_pages(size_t); #ifdef DEBUG char *todsg_name = "todsg"; ce_verbose_memory = 2; ce_verbose_other = 2; #endif /* DEBUG */ watchdog_enable = TRUE; watchdog_available = TRUE; cpu_sgn_func = cpu_sgn_update; #ifdef DEBUG /* tod_module_name should be set to "todsg" from OBP property */ if (tod_module_name && (strcmp(tod_module_name, todsg_name) == 0)) prom_printf("Using todsg driver\n"); else { prom_printf("Force using todsg driver\n"); tod_module_name = todsg_name; } #endif /* DEBUG */ /* Serengeti does not support forthdebug */ forthdebug_supported = 0; /* * Some DR operations require the system to be sync paused. * Sync pause on Serengeti could potentially take up to 4 * seconds to complete depending on the load on the SC. To * avoid send_mond panics during such operations, we need to * increase xc_tick_limit to a larger value on Serengeti by * setting xc_tick_limit_scale to 5. */ xc_tick_limit_scale = 5; if ((mmu_page_sizes == max_mmu_page_sizes) && (mmu_ism_pagesize != DEFAULT_ISM_PAGESIZE)) { if (&mmu_init_large_pages) mmu_init_large_pages(mmu_ism_pagesize); } } void load_platform_modules(void) { if (modload("misc", "pcihp") < 0) { cmn_err(CE_NOTE, "pcihp driver failed to load"); } } /*ARGSUSED*/ int plat_cpu_poweron(struct cpu *cp) { int (*serengeti_cpu_poweron)(struct cpu *) = NULL; serengeti_cpu_poweron = (int (*)(struct cpu *))modgetsymvalue("sbdp_cpu_poweron", 0); if (serengeti_cpu_poweron == NULL) return (ENOTSUP); else return ((serengeti_cpu_poweron)(cp)); } /*ARGSUSED*/ int plat_cpu_poweroff(struct cpu *cp) { int (*serengeti_cpu_poweroff)(struct cpu *) = NULL; serengeti_cpu_poweroff = (int (*)(struct cpu *))modgetsymvalue("sbdp_cpu_poweroff", 0); if (serengeti_cpu_poweroff == NULL) return (ENOTSUP); else return ((serengeti_cpu_poweroff)(cp)); } #ifdef DEBUG pgcnt_t serengeti_cage_size_limit; #endif /* Preferred minimum cage size (expressed in pages)... for DR */ pgcnt_t serengeti_minimum_cage_size = 0; void set_platform_cage_params(void) { extern pgcnt_t total_pages; extern struct memlist *phys_avail; int ret; if (kernel_cage_enable) { pgcnt_t preferred_cage_size; preferred_cage_size = MAX(serengeti_minimum_cage_size, total_pages / 256); #ifdef DEBUG if (serengeti_cage_size_limit) preferred_cage_size = serengeti_cage_size_limit; #endif kcage_range_lock(); /* * Post copies obp into the lowest slice. This requires the * cage to grow upwards */ ret = kcage_range_init(phys_avail, 0); if (ret == 0) kcage_init(preferred_cage_size); kcage_range_unlock(); } /* Only note when the cage is off since it should always be on. */ if (!kcage_on) cmn_err(CE_NOTE, "!DR Kernel Cage is DISABLED"); } #define ALIGN(x, a) ((a) == 0 ? (uint64_t)(x) : \ (((uint64_t)(x) + (uint64_t)(a) - 1l) & ~((uint64_t)(a) - 1l))) void update_mem_bounds(int brd, uint64_t base, uint64_t sz) { uint64_t end; int mnode; end = base + sz - 1; /* * First see if this board already has a memnode associated * with it. If not, see if this slice has a memnode. This * covers the cases where a single slice covers multiple * boards (cross-board interleaving) and where a single * board has multiple slices (1+GB DIMMs). */ if ((mnode = plat_lgrphand_to_mem_node(brd)) == -1) { if ((mnode = slice_to_memnode[PA_2_SLICE(base)]) == -1) mnode = mem_node_alloc(); plat_assign_lgrphand_to_mem_node(brd, mnode); } /* * Align base at 16GB boundary */ base = ALIGN(base, (1ul << PA_SLICE_SHIFT)); while (base < end) { slice_to_memnode[PA_2_SLICE(base)] = mnode; base += (1ul << PA_SLICE_SHIFT); } } /* * Dynamically detect memory slices in the system by decoding * the cpu memory decoder registers at boot time. */ void plat_fill_mc(pnode_t nodeid) { uint64_t mc_addr, mask; uint64_t mc_decode[SG_MAX_BANKS_PER_MC]; uint64_t base, size; uint32_t regs[4]; int len; int local_mc; int portid; int boardid; int i; if ((prom_getprop(nodeid, "portid", (caddr_t)&portid) < 0) || (portid == -1)) return; /* * Decode the board number from the MC portid */ boardid = SG_PORTID_TO_BOARD_NUM(portid); /* * The "reg" property returns 4 32-bit values. The first two are * combined to form a 64-bit address. The second two are for a * 64-bit size, but we don't actually need to look at that value. */ len = prom_getproplen(nodeid, "reg"); if (len != (sizeof (uint32_t) * 4)) { prom_printf("Warning: malformed 'reg' property\n"); return; } if (prom_getprop(nodeid, "reg", (caddr_t)regs) < 0) return; mc_addr = ((uint64_t)regs[0]) << 32; mc_addr |= (uint64_t)regs[1]; /* * Figure out whether the memory controller we are examining * belongs to this CPU or a different one. */ if (portid == cpunodes[CPU->cpu_id].portid) local_mc = 1; else local_mc = 0; for (i = 0; i < SG_MAX_BANKS_PER_MC; i++) { mask = SG_REG_2_OFFSET(i); /* * If the memory controller is local to this CPU, we use * the special ASI to read the decode registers. * Otherwise, we load the values from a magic address in * I/O space. */ if (local_mc) mc_decode[i] = lddmcdecode(mask & MC_OFFSET_MASK); else mc_decode[i] = lddphysio((mc_addr | mask)); if (mc_decode[i] >> MC_VALID_SHIFT) { /* * The memory decode register is a bitmask field, * so we can decode that into both a base and * a span. */ base = MC_BASE(mc_decode[i]) << PHYS2UM_SHIFT; size = MC_UK2SPAN(mc_decode[i]); update_mem_bounds(boardid, base, size); } } } /* * This routine is run midway through the boot process. By the time we get * here, we know about all the active CPU boards in the system, and we have * extracted information about each board's memory from the memory * controllers. We have also figured out which ranges of memory will be * assigned to which memnodes, so we walk the slice table to build the table * of memnodes. */ /* ARGSUSED */ void plat_build_mem_nodes(u_longlong_t *list, size_t nelems) { int slice; pfn_t basepfn; pgcnt_t npgs; mem_node_pfn_shift = PFN_SLICE_SHIFT; mem_node_physalign = (1ull << PA_SLICE_SHIFT); for (slice = 0; slice < SG_MAX_SLICE; slice++) { if (slice_to_memnode[slice] == -1) continue; basepfn = (uint64_t)slice << PFN_SLICE_SHIFT; npgs = 1ull << PFN_SLICE_SHIFT; mem_node_add_slice(basepfn, basepfn + npgs - 1); } } int plat_pfn_to_mem_node(pfn_t pfn) { int node; node = slice_to_memnode[PFN_2_SLICE(pfn)]; return (node); } /* * Serengeti support for lgroups. * * On Serengeti, an lgroup platform handle == board number. * * Mappings between lgroup handles and memnodes are managed * in addition to mappings between memory slices and memnodes * to support cross-board interleaving as well as multiple * slices per board (e.g. >1GB DIMMs). The initial mapping * of memnodes to lgroup handles is determined at boot time. * A DR addition of memory adds a new mapping. A DR copy-rename * swaps mappings. */ /* * Macro for extracting the board number from the CPU id */ #define CPUID_TO_BOARD(id) (((id) >> 2) & 0x7) /* * Return the platform handle for the lgroup containing the given CPU * * For Serengeti, lgroup platform handle == board number */ lgrp_handle_t plat_lgrp_cpu_to_hand(processorid_t id) { return (CPUID_TO_BOARD(id)); } /* * Platform specific lgroup initialization */ void plat_lgrp_init(void) { int i; extern uint32_t lgrp_expand_proc_thresh; extern uint32_t lgrp_expand_proc_diff; /* * Initialize lookup tables to invalid values so we catch * any illegal use of them. */ for (i = 0; i < SG_MAX_SLICE; i++) { slice_to_memnode[i] = -1; } /* * Set tuneables for Serengeti architecture * * lgrp_expand_proc_thresh is the minimum load on the lgroups * this process is currently running on before considering * expanding threads to another lgroup. * * lgrp_expand_proc_diff determines how much less the remote lgroup * must be loaded before expanding to it. * * Bandwidth is maximized on Serengeti by spreading load across * the machine. The impact to inter-thread communication isn't * too costly since remote latencies are relatively low. These * values equate to one CPU's load and so attempt to spread the * load out across as many lgroups as possible one CPU at a time. */ lgrp_expand_proc_thresh = LGRP_LOADAVG_THREAD_MAX; lgrp_expand_proc_diff = LGRP_LOADAVG_THREAD_MAX; } /* * Platform notification of lgroup (re)configuration changes */ /*ARGSUSED*/ void plat_lgrp_config(lgrp_config_flag_t evt, uintptr_t arg) { update_membounds_t *umb; lgrp_config_mem_rename_t lmr; lgrp_handle_t shand, thand; int snode, tnode; switch (evt) { case LGRP_CONFIG_MEM_ADD: umb = (update_membounds_t *)arg; update_mem_bounds(umb->u_board, umb->u_base, umb->u_len); break; case LGRP_CONFIG_MEM_DEL: /* We don't have to do anything */ break; case LGRP_CONFIG_MEM_RENAME: /* * During a DR copy-rename operation, all of the memory * on one board is moved to another board -- but the * addresses/pfns and memnodes don't change. This means * the memory has changed locations without changing identity. * * Source is where we are copying from and target is where we * are copying to. After source memnode is copied to target * memnode, the physical addresses of the target memnode are * renamed to match what the source memnode had. Then target * memnode can be removed and source memnode can take its * place. * * To do this, swap the lgroup handle to memnode mappings for * the boards, so target lgroup will have source memnode and * source lgroup will have empty target memnode which is where * its memory will go (if any is added to it later). * * Then source memnode needs to be removed from its lgroup * and added to the target lgroup where the memory was living * but under a different name/memnode. The memory was in the * target memnode and now lives in the source memnode with * different physical addresses even though it is the same * memory. */ shand = arg & 0xffff; thand = (arg & 0xffff0000) >> 16; snode = plat_lgrphand_to_mem_node(shand); tnode = plat_lgrphand_to_mem_node(thand); plat_assign_lgrphand_to_mem_node(thand, snode); plat_assign_lgrphand_to_mem_node(shand, tnode); /* * Remove source memnode of copy rename from its lgroup * and add it to its new target lgroup */ lmr.lmem_rename_from = shand; lmr.lmem_rename_to = thand; lgrp_config(LGRP_CONFIG_MEM_RENAME, (uintptr_t)snode, (uintptr_t)&lmr); break; default: break; } } /* * Return latency between "from" and "to" lgroups * * This latency number can only be used for relative comparison * between lgroups on the running system, cannot be used across platforms, * and may not reflect the actual latency. It is platform and implementation * specific, so platform gets to decide its value. It would be nice if the * number was at least proportional to make comparisons more meaningful though. * NOTE: The numbers below are supposed to be load latencies for uncached * memory divided by 10. */ int plat_lgrp_latency(lgrp_handle_t from, lgrp_handle_t to) { /* * Return min remote latency when there are more than two lgroups * (root and child) and getting latency between two different lgroups * or root is involved */ if (lgrp_optimizations() && (from != to || from == LGRP_DEFAULT_HANDLE || to == LGRP_DEFAULT_HANDLE)) return (28); else return (23); } /* ARGSUSED */ void plat_freelist_process(int mnode) { } /* * Find dip for chosen IOSRAM */ dev_info_t * find_chosen_dip(void) { dev_info_t *dip; char master_sbbc[MAXNAMELEN]; pnode_t nodeid; uint_t tunnel; /* * find the /chosen SBBC node, prom interface will handle errors */ nodeid = prom_chosennode(); /* * get the 'iosram' property from the /chosen node */ if (prom_getprop(nodeid, IOSRAM_CHOSEN_PROP, (caddr_t)&tunnel) <= 0) { SBBC_ERR(CE_PANIC, "No iosram property found! \n"); } if (prom_phandle_to_path((phandle_t)tunnel, master_sbbc, sizeof (master_sbbc)) < 0) { SBBC_ERR1(CE_PANIC, "prom_phandle_to_path(%d) failed\n", tunnel); } chosen_nodeid = nodeid; /* * load and attach the sgsbbc driver. * This will also attach all the sgsbbc driver instances */ if (i_ddi_attach_hw_nodes("sgsbbc") != DDI_SUCCESS) { cmn_err(CE_WARN, "sgsbbc failed to load\n"); } /* translate a path name to a dev_info_t */ dip = e_ddi_hold_devi_by_path(master_sbbc, 0); if ((dip == NULL) || (ddi_get_nodeid(dip) != tunnel)) { cmn_err(CE_PANIC, "i_ddi_path_to_devi(%x) failed for SBBC\n", tunnel); } /* make sure devi_ref is ZERO */ ndi_rele_devi(dip); DCMNERR(CE_CONT, "Chosen IOSRAM is at %s \n", master_sbbc); return (dip); } void load_platform_drivers(void) { int ret; /* * Load and attach the mc-us3 memory driver. */ if (i_ddi_attach_hw_nodes("mc-us3") != DDI_SUCCESS) cmn_err(CE_WARN, "mc-us3 failed to load"); else (void) ddi_hold_driver(ddi_name_to_major("mc-us3")); /* * Initialize the chosen IOSRAM before its clients * are loaded. */ (void) find_chosen_dip(); /* * Ideally, we'd do this in set_platform_defaults(), but * at that point it's too early to look up symbols. */ iosram_write_ptr = (int (*)(int, uint32_t, caddr_t, uint32_t)) modgetsymvalue("iosram_write", 0); if (iosram_write_ptr == NULL) { DCMNERR(CE_WARN, "load_platform_defaults: iosram_write()" " not found; signatures will not be updated\n"); } else { /* * The iosram read ptr is only needed if we can actually * write CPU signatures, so only bother setting it if we * set a valid write pointer, above. */ iosram_read_ptr = (int (*)(int, uint32_t, caddr_t, uint32_t)) modgetsymvalue("iosram_read", 0); if (iosram_read_ptr == NULL) DCMNERR(CE_WARN, "load_platform_defaults: iosram_read()" " not found\n"); } /* * Set todsg_use_sc to TRUE so that we will be getting date * from the SC. */ todsg_use_sc = TRUE; /* * Now is a good time to activate hardware watchdog (if one exists). */ mutex_enter(&tod_lock); if (watchdog_enable) ret = tod_ops.tod_set_watchdog_timer(watchdog_timeout_seconds); mutex_exit(&tod_lock); if (ret != 0) printf("Hardware watchdog enabled\n"); /* * Load and attach the schizo pci bus nexus driver. */ if (i_ddi_attach_hw_nodes("pcisch") != DDI_SUCCESS) cmn_err(CE_WARN, "pcisch failed to load"); plat_ecc_init(); } /* * No platform drivers on this platform */ char *platform_module_list[] = { (char *)0 }; /*ARGSUSED*/ void plat_tod_fault(enum tod_fault_type tod_bad) { } int plat_max_boards() { return (SG_MAX_BDS); } int plat_max_io_units_per_board() { return (SG_MAX_IO_PER_BD); } int plat_max_cmp_units_per_board() { return (SG_MAX_CMPS_PER_BD); } int plat_max_cpu_units_per_board() { return (SG_MAX_CPUS_PER_BD); } int plat_max_mc_units_per_board() { return (SG_MAX_CMPS_PER_BD); /* each CPU die has a memory controller */ } int plat_max_mem_units_per_board() { return (SG_MAX_MEM_PER_BD); } int plat_max_cpumem_boards(void) { return (SG_MAX_CPU_BDS); } int set_platform_max_ncpus(void) { return (sg_max_ncpus); } void plat_dmv_params(uint_t *hwint, uint_t *swint) { *hwint = MAX_UPA; *swint = 0; } /* * Our nodename has been set, pass it along to the SC. */ void plat_nodename_set(void) { sbbc_msg_t req; /* request */ sbbc_msg_t resp; /* response */ int rv; /* return value from call to mbox */ struct nodename_info { int32_t namelen; char nodename[_SYS_NMLN]; } nni; int (*sg_mbox)(sbbc_msg_t *, sbbc_msg_t *, time_t) = NULL; /* * find the symbol for the mailbox routine */ sg_mbox = (int (*)(sbbc_msg_t *, sbbc_msg_t *, time_t)) modgetsymvalue("sbbc_mbox_request_response", 0); if (sg_mbox == NULL) { cmn_err(CE_NOTE, "!plat_nodename_set: sg_mbox not found\n"); return; } /* * construct the message telling the SC our nodename */ (void) strcpy(nni.nodename, utsname.nodename); nni.namelen = (int32_t)strlen(nni.nodename); req.msg_type.type = INFO_MBOX; req.msg_type.sub_type = INFO_MBOX_NODENAME; req.msg_status = 0; req.msg_len = (int)(nni.namelen + sizeof (nni.namelen)); req.msg_bytes = 0; req.msg_buf = (caddr_t)&nni; req.msg_data[0] = 0; req.msg_data[1] = 0; /* * initialize the response back from the SC */ resp.msg_type.type = INFO_MBOX; resp.msg_type.sub_type = INFO_MBOX_NODENAME; resp.msg_status = 0; resp.msg_len = 0; resp.msg_bytes = 0; resp.msg_buf = (caddr_t)0; resp.msg_data[0] = 0; resp.msg_data[1] = 0; /* * ship it and check for success */ rv = (sg_mbox)(&req, &resp, sbbc_mbox_default_timeout); if (rv != 0) { cmn_err(CE_NOTE, "!plat_nodename_set: sg_mbox retval %d\n", rv); } else if (resp.msg_status != 0) { cmn_err(CE_NOTE, "!plat_nodename_set: msg_status %d\n", resp.msg_status); } else { DCMNERR(CE_NOTE, "!plat_nodename_set was successful\n"); /* * It is necessary to exchange the capability bitmap * with SC before sending any ecc error information and * indictment. We are calling the plat_ecc_capability_send() * here just after sending the nodename successfully. */ rv = plat_ecc_capability_send(); if (rv == 0) { DCMNERR(CE_NOTE, "!plat_ecc_capability_send was" " successful\n"); } } } /* * flag to allow users switch between using OBP's * prom_get_unum() and mc-us3 driver's p2get_mem_unum() * (for main memory errors only). */ int sg_use_prom_get_unum = 0; /* * Debugging flag: set to 1 to call into obp for get_unum, or set it to 0 * to call into the unum cache system. This is the E$ equivalent of * sg_use_prom_get_unum. */ int sg_use_prom_ecache_unum = 0; /* used for logging ECC errors to the SC */ #define SG_MEMORY_ECC 1 #define SG_ECACHE_ECC 2 #define SG_UNKNOWN_ECC (-1) /* * plat_get_mem_unum() generates a string identifying either the * memory or E$ DIMM(s) during error logging. Depending on whether * the error is E$ or memory related, the appropriate support * routine is called to assist in the string generation. * * - For main memory errors we can use the mc-us3 drivers p2getunum() * (or prom_get_unum() for debugging purposes). * * - For E$ errors we call sg_get_ecacheunum() to generate the unum (or * prom_serengeti_get_ecacheunum() for debugging purposes). */ static int sg_prom_get_unum(int synd_code, uint64_t paddr, char *buf, int buflen, int *lenp) { if ((prom_get_unum(synd_code, (unsigned long long)paddr, buf, buflen, lenp)) != 0) return (EIO); else if (*lenp <= 1) return (EINVAL); else return (0); } /*ARGSUSED*/ int plat_get_mem_unum(int synd_code, uint64_t flt_addr, int flt_bus_id, int flt_in_memory, ushort_t flt_status, char *buf, int buflen, int *lenp) { /* * unum_func will either point to the memory drivers p2get_mem_unum() * or to prom_get_unum() for memory errors. */ int (*unum_func)(int synd_code, uint64_t paddr, char *buf, int buflen, int *lenp) = p2get_mem_unum; /* * check if it's a Memory or an Ecache error. */ if (flt_in_memory) { /* * It's a main memory error. * * For debugging we allow the user to switch between * using OBP's get_unum and the memory driver's get_unum * so we create a pointer to the functions and switch * depending on the sg_use_prom_get_unum flag. */ if (sg_use_prom_get_unum) { DCMNERR(CE_NOTE, "Using prom_get_unum from OBP"); return (sg_prom_get_unum(synd_code, P2ALIGN(flt_addr, 8), buf, buflen, lenp)); } else if (unum_func != NULL) { return (unum_func(synd_code, P2ALIGN(flt_addr, 8), buf, buflen, lenp)); } else { return (ENOTSUP); } } else if (flt_status & ECC_ECACHE) { /* * It's an E$ error. */ if (sg_use_prom_ecache_unum) { /* * We call to OBP to handle this. */ DCMNERR(CE_NOTE, "Using prom_serengeti_get_ecacheunum from OBP"); if (prom_serengeti_get_ecacheunum(flt_bus_id, P2ALIGN(flt_addr, 8), buf, buflen, lenp) != 0) { return (EIO); } } else { return (sg_get_ecacheunum(flt_bus_id, flt_addr, buf, buflen, lenp)); } } else { return (ENOTSUP); } return (0); } /* * This platform hook gets called from mc_add_mem_unum_label() in the mc-us3 * driver giving each platform the opportunity to add platform * specific label information to the unum for ECC error logging purposes. */ void plat_add_mem_unum_label(char *unum, int mcid, int bank, int dimm) { char new_unum[UNUM_NAMLEN] = ""; int node = SG_PORTID_TO_NODEID(mcid); int board = SG_CPU_BD_PORTID_TO_BD_NUM(mcid); int position = SG_PORTID_TO_CPU_POSN(mcid); /* * The mc-us3 driver deals with logical banks but for unum * purposes we need to use physical banks so that the correct * dimm can be physically located. Logical banks 0 and 2 * make up physical bank 0. Logical banks 1 and 3 make up * physical bank 1. Here we do the necessary conversion. */ bank = (bank % 2); if (dimm == -1) { SG_SET_FRU_NAME_NODE(new_unum, node); SG_SET_FRU_NAME_CPU_BOARD(new_unum, board); SG_SET_FRU_NAME_MODULE(new_unum, position); SG_SET_FRU_NAME_BANK(new_unum, bank); } else { SG_SET_FRU_NAME_NODE(new_unum, node); SG_SET_FRU_NAME_CPU_BOARD(new_unum, board); SG_SET_FRU_NAME_MODULE(new_unum, position); SG_SET_FRU_NAME_BANK(new_unum, bank); SG_SET_FRU_NAME_DIMM(new_unum, dimm); strcat(new_unum, " "); strcat(new_unum, unum); } strcpy(unum, new_unum); } int plat_get_cpu_unum(int cpuid, char *buf, int buflen, int *lenp) { int node = SG_PORTID_TO_NODEID(cpuid); int board = SG_CPU_BD_PORTID_TO_BD_NUM(cpuid); if (snprintf(buf, buflen, "/N%d/%s%d", node, SG_HPU_TYPE_CPU_BOARD_ID, board) >= buflen) { return (ENOSPC); } else { *lenp = strlen(buf); return (0); } } /* * We log all ECC events to the SC so we send a mailbox * message to the SC passing it the relevant data. * ECC mailbox messages are sent via a taskq mechanism to * prevent impaired system performance during ECC floods. * Indictments have already passed through a taskq, so they * are not queued here. */ int plat_send_ecc_mailbox_msg(plat_ecc_message_type_t msg_type, void *datap) { sbbc_ecc_mbox_t *msgp; size_t msg_size; uint16_t msg_subtype; int sleep_flag, log_error; if (sg_ecc_taskq_func == NULL) { sg_ecc_taskq_func = (void (*)(sbbc_ecc_mbox_t *)) modgetsymvalue("sbbc_mbox_queue_ecc_event", 0); if (sg_ecc_taskq_func == NULL) { cmn_err(CE_NOTE, "!plat_send_ecc_mailbox_msg: " "sbbc_mbox_queue_ecc_event not found"); return (ENODEV); } } if (sg_ecc_mbox_func == NULL) { sg_ecc_mbox_func = (int (*)(sbbc_ecc_mbox_t *)) modgetsymvalue("sbbc_mbox_ecc_output", 0); if (sg_ecc_mbox_func == NULL) { cmn_err(CE_NOTE, "!plat_send_ecc_mailbox_msg: " "sbbc_mbox_ecc_output not found"); return (ENODEV); } } /* * Initialize the request and response structures */ switch (msg_type) { case PLAT_ECC_ERROR_MESSAGE: msg_subtype = INFO_MBOX_ERROR_ECC; msg_size = sizeof (plat_ecc_error_data_t); sleep_flag = KM_NOSLEEP; log_error = 1; break; case PLAT_ECC_ERROR2_MESSAGE: msg_subtype = INFO_MBOX_ECC; msg_size = sizeof (plat_ecc_error2_data_t); sleep_flag = KM_NOSLEEP; log_error = 1; break; case PLAT_ECC_INDICTMENT_MESSAGE: msg_subtype = INFO_MBOX_ERROR_INDICT; msg_size = sizeof (plat_ecc_indictment_data_t); sleep_flag = KM_SLEEP; log_error = 0; break; case PLAT_ECC_INDICTMENT2_MESSAGE: msg_subtype = INFO_MBOX_ECC; msg_size = sizeof (plat_ecc_indictment2_data_t); sleep_flag = KM_SLEEP; log_error = 0; break; case PLAT_ECC_CAPABILITY_MESSAGE: msg_subtype = INFO_MBOX_ECC_CAP; msg_size = sizeof (plat_capability_data_t) + strlen(utsname.release) + strlen(utsname.version) + 2; sleep_flag = KM_SLEEP; log_error = 0; break; case PLAT_ECC_DIMM_SID_MESSAGE: msg_subtype = INFO_MBOX_ECC; msg_size = sizeof (plat_dimm_sid_request_data_t); sleep_flag = KM_SLEEP; log_error = 0; break; default: return (EINVAL); } msgp = (sbbc_ecc_mbox_t *)kmem_zalloc(sizeof (sbbc_ecc_mbox_t), sleep_flag); if (msgp == NULL) { cmn_err(CE_NOTE, "!plat_send_ecc_mailbox_msg: " "unable to allocate sbbc_ecc_mbox"); return (ENOMEM); } msgp->ecc_log_error = log_error; msgp->ecc_req.msg_type.type = INFO_MBOX; msgp->ecc_req.msg_type.sub_type = msg_subtype; msgp->ecc_req.msg_status = 0; msgp->ecc_req.msg_len = (int)msg_size; msgp->ecc_req.msg_bytes = 0; msgp->ecc_req.msg_buf = (caddr_t)kmem_zalloc(msg_size, sleep_flag); msgp->ecc_req.msg_data[0] = 0; msgp->ecc_req.msg_data[1] = 0; if (msgp->ecc_req.msg_buf == NULL) { cmn_err(CE_NOTE, "!plat_send_ecc_mailbox_msg: " "unable to allocate request msg_buf"); kmem_free((void *)msgp, sizeof (sbbc_ecc_mbox_t)); return (ENOMEM); } bcopy(datap, (void *)msgp->ecc_req.msg_buf, msg_size); /* * initialize the response back from the SC */ msgp->ecc_resp.msg_type.type = INFO_MBOX; msgp->ecc_resp.msg_type.sub_type = msg_subtype; msgp->ecc_resp.msg_status = 0; msgp->ecc_resp.msg_len = 0; msgp->ecc_resp.msg_bytes = 0; msgp->ecc_resp.msg_buf = NULL; msgp->ecc_resp.msg_data[0] = 0; msgp->ecc_resp.msg_data[1] = 0; switch (msg_type) { case PLAT_ECC_ERROR_MESSAGE: case PLAT_ECC_ERROR2_MESSAGE: /* * For Error Messages, we go through a taskq. * Queue up the message for processing */ (*sg_ecc_taskq_func)(msgp); return (0); case PLAT_ECC_CAPABILITY_MESSAGE: /* * For indictment and capability messages, we've already gone * through the taskq, so we can call the mailbox routine * directly. Find the symbol for the routine that sends * the mailbox msg */ msgp->ecc_resp.msg_len = (int)msg_size; msgp->ecc_resp.msg_buf = (caddr_t)kmem_zalloc(msg_size, sleep_flag); /* FALLTHRU */ case PLAT_ECC_INDICTMENT_MESSAGE: case PLAT_ECC_INDICTMENT2_MESSAGE: return ((*sg_ecc_mbox_func)(msgp)); case PLAT_ECC_DIMM_SID_MESSAGE: msgp->ecc_resp.msg_len = sizeof (plat_dimm_sid_board_data_t); msgp->ecc_resp.msg_buf = (caddr_t)kmem_zalloc( sizeof (plat_dimm_sid_board_data_t), sleep_flag); return ((*sg_ecc_mbox_func)(msgp)); default: ASSERT(0); return (EINVAL); } } /* * m is redundant on serengeti as the multiplier is always 4 */ /*ARGSUSED*/ int plat_make_fru_cpuid(int sb, int m, int proc) { return (MAKE_CPUID(sb, proc)); } /* * board number for a given proc */ int plat_make_fru_boardnum(int proc) { return (SG_CPU_BD_PORTID_TO_BD_NUM(proc)); } static void cpu_sgn_update(ushort_t sig, uchar_t state, uchar_t sub_state, int cpuid) { uint32_t signature = CPU_SIG_BLD(sig, state, sub_state); sig_state_t current_sgn; int i; if (iosram_write_ptr == NULL) { /* * If the IOSRAM write pointer isn't set, we won't be able * to write signatures to ANYTHING, so we may as well just * write out an error message (if desired) and exit this * routine now... */ DCMNERR(CE_WARN, "cpu_sgn_update: iosram_write() not found;" " cannot write signature 0x%x for CPU(s) or domain\n", signature); return; } /* * Differentiate a panic reboot from a non-panic reboot in the * setting of the substate of the signature. * * If the new substate is REBOOT and we're rebooting due to a panic, * then set the new substate to a special value indicating a panic * reboot, SIGSUBST_PANIC_REBOOT. * * A panic reboot is detected by a current (previous) domain signature * state of SIGST_EXIT, and a new signature substate of SIGSUBST_REBOOT. * The domain signature state SIGST_EXIT is used as the panic flow * progresses. * * At the end of the panic flow, the reboot occurs but we should now * one that was involuntary, something that may be quite useful to know * at OBP level. */ if (sub_state == SIGSUBST_REBOOT) { if (iosram_read_ptr == NULL) { DCMNERR(CE_WARN, "cpu_sgn_update: iosram_read() not found;" " could not check current domain signature\n"); } else { (void) (*iosram_read_ptr)(SBBC_SIGBLCK_KEY, SG_SGNBLK_DOMAINSIG_OFFSET, (char *)¤t_sgn, sizeof (current_sgn)); if (current_sgn.state_t.state == SIGST_EXIT) signature = CPU_SIG_BLD(sig, state, SIGSUBST_PANIC_REBOOT); } } /* * cpuid == -1 indicates that the operation applies to all cpus. */ if (cpuid >= 0) { (void) (*iosram_write_ptr)(SBBC_SIGBLCK_KEY, SG_SGNBLK_CPUSIG_OFFSET(cpuid), (char *)&signature, sizeof (signature)); } else { for (i = 0; i < NCPU; i++) { if (cpu[i] == NULL || !(cpu[i]->cpu_flags & (CPU_EXISTS|CPU_QUIESCED))) { continue; } (void) (*iosram_write_ptr)(SBBC_SIGBLCK_KEY, SG_SGNBLK_CPUSIG_OFFSET(i), (char *)&signature, sizeof (signature)); } } if (state == SIGST_OFFLINE || state == SIGST_DETACHED) { return; } (void) (*iosram_write_ptr)(SBBC_SIGBLCK_KEY, SG_SGNBLK_DOMAINSIG_OFFSET, (char *)&signature, sizeof (signature)); } void startup_platform(void) { } /* * A routine to convert a number (represented as a string) to * the integer value it represents. */ static int isdigit(int ch) { return (ch >= '0' && ch <= '9'); } #define isspace(c) ((c) == ' ' || (c) == '\t' || (c) == '\n') static int strtoi(char *p, char **pos) { int n; int c, neg = 0; if (!isdigit(c = *p)) { while (isspace(c)) c = *++p; switch (c) { case '-': neg++; /* FALLTHROUGH */ case '+': c = *++p; } if (!isdigit(c)) { if (pos != NULL) *pos = p; return (0); } } for (n = '0' - c; isdigit(c = *++p); ) { n *= 10; /* two steps to avoid unnecessary overflow */ n += '0' - c; /* accum neg to avoid surprises at MAX */ } if (pos != NULL) *pos = p; return (neg ? n : -n); } /* * Get the three parts of the Serengeti PROM version. * Used for feature readiness tests. * * Return 0 if version extracted successfully, -1 otherwise. */ int sg_get_prom_version(int *sysp, int *intfp, int *bldp) { int plen; char vers[512]; static pnode_t node; static char version[] = "version"; char *verp, *ep; node = prom_finddevice("/openprom"); if (node == OBP_BADNODE) return (-1); plen = prom_getproplen(node, version); if (plen <= 0 || plen >= sizeof (vers)) return (-1); (void) prom_getprop(node, version, vers); vers[plen] = '\0'; /* Make sure it's an OBP flashprom */ if (vers[0] != 'O' && vers[1] != 'B' && vers[2] != 'P') { cmn_err(CE_WARN, "sg_get_prom_version: " "unknown string in \n"); return (-1); } verp = &vers[4]; *sysp = strtoi(verp, &ep); if (ep == verp || *ep != '.') return (-1); verp = ep + 1; *intfp = strtoi(verp, &ep); if (ep == verp || *ep != '.') return (-1); verp = ep + 1; *bldp = strtoi(verp, &ep); if (ep == verp || (*ep != '\0' && !isspace(*ep))) return (-1); return (0); } /* * Return 0 if system board Dynamic Reconfiguration * is supported by the firmware, -1 otherwise. */ int sg_prom_sb_dr_check(void) { static int prom_res = 1; if (prom_res == 1) { int sys, intf, bld; int rv; rv = sg_get_prom_version(&sys, &intf, &bld); if (rv == 0 && sys == 5 && (intf >= 12 || (intf == 11 && bld >= 200))) { prom_res = 0; } else { prom_res = -1; } } return (prom_res); } /* * Return 0 if cPCI Dynamic Reconfiguration * is supported by the firmware, -1 otherwise. */ int sg_prom_cpci_dr_check(void) { /* * The version check is currently the same as for * system boards. Since the two DR sub-systems are * independent, this could change. */ return (sg_prom_sb_dr_check()); } /* * KDI functions - used by the in-situ kernel debugger (kmdb) to perform * platform-specific operations. These functions execute when the world is * stopped, and as such cannot make any blocking calls, hold locks, etc. * promif functions are a special case, and may be used. */ /* * Our implementation of this KDI op updates the CPU signature in the system * controller. Note that we set the signature to OBP_SIG, rather than DBG_SIG. * The Forth words we execute will, among other things, transform our OBP_SIG * into DBG_SIG. They won't function properly if we try to use DBG_SIG. */ static void sg_system_claim(void) { prom_interpret("sigb-sig! my-sigb-sig!", OBP_SIG, OBP_SIG, 0, 0, 0); } static void sg_system_release(void) { prom_interpret("sigb-sig! my-sigb-sig!", OS_SIG, OS_SIG, 0, 0, 0); } static void sg_console_claim(void) { prom_serengeti_set_console_input(SGCN_OBP_STR); } static void sg_console_release(void) { prom_serengeti_set_console_input(SGCN_CLNT_STR); } void plat_kdi_init(kdi_t *kdi) { kdi->pkdi_system_claim = sg_system_claim; kdi->pkdi_system_release = sg_system_release; kdi->pkdi_console_claim = sg_console_claim; kdi->pkdi_console_release = sg_console_release; }