/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * fpRAS implementation structures. */ struct fpras_chkfn *fpras_chkfnaddrs[FPRAS_NCOPYOPS]; struct fpras_chkfngrp *fpras_chkfngrps; struct fpras_chkfngrp *fpras_chkfngrps_base; int fpras_frequency = -1; int64_t fpras_interval = -1; /* * Halt idling cpus optimization * * This optimation is only enabled in platforms that have * the CPU halt support. The cpu_halt_cpu() support is provided * in the cpu module and it is referenced here with a pragma weak. * The presence of this routine automatically enable the halt idling * cpus functionality if the global switch enable_halt_idle_cpus * is set (default is set). * */ #pragma weak cpu_halt_cpu extern void cpu_halt_cpu(); int enable_halt_idle_cpus = 1; /* global switch */ void setup_trap_table(void) { intr_init(CPU); /* init interrupt request free list */ setwstate(WSTATE_KERN); prom_set_traptable(&trap_table); } void mach_fpras() { if (fpras_implemented && !fpras_disable) { int i; struct fpras_chkfngrp *fcgp; size_t chkfngrpsallocsz; /* * Note that we size off of NCPU and setup for * all those possibilities regardless of whether * the cpu id is present or not. We do this so that * we don't have any construction or destruction * activity to perform at DR time, and it's not * costly in memory. We require block alignment. */ chkfngrpsallocsz = NCPU * sizeof (struct fpras_chkfngrp); fpras_chkfngrps_base = kmem_alloc(chkfngrpsallocsz, KM_SLEEP); if (IS_P2ALIGNED((uintptr_t)fpras_chkfngrps_base, 64)) { fpras_chkfngrps = fpras_chkfngrps_base; } else { kmem_free(fpras_chkfngrps_base, chkfngrpsallocsz); chkfngrpsallocsz += 64; fpras_chkfngrps_base = kmem_alloc(chkfngrpsallocsz, KM_SLEEP); fpras_chkfngrps = (struct fpras_chkfngrp *) P2ROUNDUP((uintptr_t)fpras_chkfngrps_base, 64); } /* * Copy our check function into place for each copy operation * and each cpu id. */ fcgp = &fpras_chkfngrps[0]; for (i = 0; i < FPRAS_NCOPYOPS; ++i) bcopy((void *)fpras_chkfn_type1, &fcgp->fpras_fn[i], sizeof (struct fpras_chkfn)); for (i = 1; i < NCPU; ++i) *(&fpras_chkfngrps[i]) = *fcgp; /* * At definition fpras_frequency is set to -1, and it will * still have that value unless changed in /etc/system (not * strictly supported, but not preventable). The following * both sets the default and sanity checks anything from * /etc/system. */ if (fpras_frequency < 0) fpras_frequency = FPRAS_DEFAULT_FREQUENCY; /* * Now calculate fpras_interval. When fpras_interval * becomes non-negative fpras checks will commence * (copies before this point in boot will bypass fpras). * Our stores of instructions must be visible; no need * to flush as they're never been executed before. */ membar_producer(); fpras_interval = (fpras_frequency == 0) ? 0 : sys_tick_freq / fpras_frequency; } } void mach_hw_copy_limit(void) { if (!fpu_exists) { use_hw_bcopy = 0; hw_copy_limit_1 = 0; hw_copy_limit_2 = 0; hw_copy_limit_4 = 0; hw_copy_limit_8 = 0; use_hw_bzero = 0; } } void load_tod_module() { /* * Load tod driver module for the tod part found on this system. * Recompute the cpu frequency/delays based on tod as tod part * tends to keep time more accurately. */ if (tod_module_name == NULL || modload("tod", tod_module_name) == -1) halt("Can't load tod module"); } void mach_memscrub(void) { /* * Startup memory scrubber, if not running fpu emulation code. */ #ifndef _HW_MEMSCRUB_SUPPORT if (fpu_exists) { if (memscrub_init()) { cmn_err(CE_WARN, "Memory scrubber failed to initialize"); } } #endif /* _HW_MEMSCRUB_SUPPORT */ } /* * Halt the calling CPU until awoken via an interrupt * This routine should only be invoked if cpu_halt_cpu() * exists and is supported, see mach_cpu_halt_idle() */ static void cpu_halt(void) { cpu_t *cpup = CPU; processorid_t cpun = cpup->cpu_id; cpupart_t *cp = cpup->cpu_part; int hset_update = 1; uint_t pstate; extern uint_t getpstate(void); extern void setpstate(uint_t); /* * If this CPU is online, and there's multiple CPUs * in the system, then we should notate our halting * by adding ourselves to the partition's halted CPU * bitmap. This allows other CPUs to find/awaken us when * work becomes available. */ if (CPU->cpu_flags & CPU_OFFLINE || ncpus == 1) hset_update = 0; /* * Add ourselves to the partition's halted CPUs bitmask * and set our HALTED flag, if necessary. * * When a thread becomes runnable, it is placed on the queue * and then the halted cpuset is checked to determine who * (if anyone) should be awoken. We therefore need to first * add ourselves to the halted cpuset, and then check if there * is any work available. */ if (hset_update) { cpup->cpu_disp_flags |= CPU_DISP_HALTED; membar_producer(); CPUSET_ATOMIC_ADD(cp->cp_haltset, cpun); } /* * Check to make sure there's really nothing to do. * Work destined for this CPU may become available after * this check. We'll be notified through the clearing of our * bit in the halted CPU bitmask, and a poke. */ if (disp_anywork()) { if (hset_update) { cpup->cpu_disp_flags &= ~CPU_DISP_HALTED; CPUSET_ATOMIC_DEL(cp->cp_haltset, cpun); } return; } /* * We're on our way to being halted. * * Disable interrupts now, so that we'll awaken immediately * after halting if someone tries to poke us between now and * the time we actually halt. * * We check for the presence of our bit after disabling interrupts. * If it's cleared, we'll return. If the bit is cleared after * we check then the poke will pop us out of the halted state. * * The ordering of the poke and the clearing of the bit by cpu_wakeup * is important. * cpu_wakeup() must clear, then poke. * cpu_halt() must disable interrupts, then check for the bit. */ pstate = getpstate(); setpstate(pstate & ~PSTATE_IE); if (hset_update && !CPU_IN_SET(cp->cp_haltset, cpun)) { cpup->cpu_disp_flags &= ~CPU_DISP_HALTED; setpstate(pstate); return; } /* * The check for anything locally runnable is here for performance * and isn't needed for correctness. disp_nrunnable ought to be * in our cache still, so it's inexpensive to check, and if there * is anything runnable we won't have to wait for the poke. */ if (cpup->cpu_disp->disp_nrunnable != 0) { if (hset_update) { cpup->cpu_disp_flags &= ~CPU_DISP_HALTED; CPUSET_ATOMIC_DEL(cp->cp_haltset, cpun); } setpstate(pstate); return; } /* * Halt the strand. */ if (&cpu_halt_cpu) cpu_halt_cpu(); /* * We're no longer halted */ setpstate(pstate); if (hset_update) { cpup->cpu_disp_flags &= ~CPU_DISP_HALTED; CPUSET_ATOMIC_DEL(cp->cp_haltset, cpun); } } /* * If "cpu" is halted, then wake it up clearing its halted bit in advance. * Otherwise, see if other CPUs in the cpu partition are halted and need to * be woken up so that they can steal the thread we placed on this CPU. * This function is only used on MP systems. * This function should only be invoked if cpu_halt_cpu() * exists and is supported, see mach_cpu_halt_idle() */ static void cpu_wakeup(cpu_t *cpu, int bound) { uint_t cpu_found; int result; cpupart_t *cp; cp = cpu->cpu_part; if (CPU_IN_SET(cp->cp_haltset, cpu->cpu_id)) { /* * Clear the halted bit for that CPU since it will be * poked in a moment. */ CPUSET_ATOMIC_DEL(cp->cp_haltset, cpu->cpu_id); /* * We may find the current CPU present in the halted cpuset * if we're in the context of an interrupt that occurred * before we had a chance to clear our bit in cpu_halt(). * Poking ourself is obviously unnecessary, since if * we're here, we're not halted. */ if (cpu != CPU) poke_cpu(cpu->cpu_id); return; } else { /* * This cpu isn't halted, but it's idle or undergoing a * context switch. No need to awaken anyone else. */ if (cpu->cpu_thread == cpu->cpu_idle_thread || cpu->cpu_disp_flags & CPU_DISP_DONTSTEAL) return; } /* * No need to wake up other CPUs if the thread we just enqueued * is bound. */ if (bound) return; /* * See if there's any other halted CPUs. If there are, then * select one, and awaken it. * It's possible that after we find a CPU, somebody else * will awaken it before we get the chance. * In that case, look again. */ do { CPUSET_FIND(cp->cp_haltset, cpu_found); if (cpu_found == CPUSET_NOTINSET) return; ASSERT(cpu_found >= 0 && cpu_found < NCPU); CPUSET_ATOMIC_XDEL(cp->cp_haltset, cpu_found, result); } while (result < 0); if (cpu_found != CPU->cpu_id) poke_cpu(cpu_found); } void mach_cpu_halt_idle() { if (enable_halt_idle_cpus) { if (&cpu_halt_cpu) { idle_cpu = cpu_halt; disp_enq_thread = cpu_wakeup; } } } /*ARGSUSED*/ void cpu_intrq_setup(struct cpu *cp) { /* Interrupt mondo queues not applicable to sun4u */ } /*ARGSUSED*/ void cpu_intrq_cleanup(struct cpu *cp) { /* Interrupt mondo queues not applicable to sun4u */ } /*ARGSUSED*/ void cpu_intrq_register(struct cpu *cp) { /* Interrupt/error queues not applicable to sun4u */ } /*ARGSUSED*/ void mach_htraptrace_setup(int cpuid) { /* Setup hypervisor traptrace buffer, not applicable to sun4u */ } /*ARGSUSED*/ void mach_htraptrace_configure(int cpuid) { /* enable/ disable hypervisor traptracing, not applicable to sun4u */ } /*ARGSUSED*/ void mach_htraptrace_cleanup(int cpuid) { /* cleanup hypervisor traptrace buffer, not applicable to sun4u */ } void mach_descrip_startup_init(void) { /* * Only for sun4v. * Initialize Machine description framework during startup. */ } void mach_descrip_startup_fini(void) { /* * Only for sun4v. * Clean up Machine Description framework during startup. */ } void mach_descrip_init(void) { /* * Only for sun4v. * Initialize Machine description framework. */ } void hsvc_setup(void) { /* Setup hypervisor services, not applicable to sun4u */ } void load_mach_drivers(void) { /* Currently no machine class (sun4u) specific drivers to load */ } /* * Return true if the machine we're running on is a Positron. * (Positron is an unsupported developers platform.) */ int iam_positron(void) { char model[32]; const char proto_model[] = "SUNW,501-2732"; pnode_t root = prom_rootnode(); if (prom_getproplen(root, "model") != sizeof (proto_model)) return (0); (void) prom_getprop(root, "model", model); if (strcmp(model, proto_model) == 0) return (1); return (0); } /* * Find a physically contiguous area of twice the largest ecache size * to be used while doing displacement flush of ecaches. */ uint64_t ecache_flush_address(void) { struct memlist *pmem; uint64_t flush_size; uint64_t ret_val; flush_size = ecache_size * 2; for (pmem = phys_install; pmem; pmem = pmem->next) { ret_val = P2ROUNDUP(pmem->address, ecache_size); if (ret_val + flush_size <= pmem->address + pmem->size) return (ret_val); } return ((uint64_t)-1); } /* * Called with the memlist lock held to say that phys_install has * changed. */ void phys_install_has_changed(void) { /* * Get the new address into a temporary just in case panicking * involves use of ecache_flushaddr. */ uint64_t new_addr; new_addr = ecache_flush_address(); if (new_addr == (uint64_t)-1) { cmn_err(CE_PANIC, "ecache_flush_address(): failed, ecache_size=%x", ecache_size); /*NOTREACHED*/ } ecache_flushaddr = new_addr; membar_producer(); }