/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define offsetof(s, m) (size_t)(&(((s *)0)->m)) #define RMCRESBUFLEN 1024 #define DATE_TIME_MSG_SIZE 78 #define RMCLOMV_WATCHDOG_MODE "rmclomv-watchdog-mode" extern void pmugpio_watchdog_pat(); static clock_t timesync_interval; extern int watchdog_activated; static int last_watchdog_msg = 1; extern int watchdog_enable; extern int boothowto; int rmclomv_watchdog_mode; /* * functions local to this driver. */ static int rmclomv_getinfo(dev_info_t *dip, ddi_info_cmd_t cmd, void *arg, void **resultp); static int rmclomv_attach(dev_info_t *dip, ddi_attach_cmd_t cmd); static int rmclomv_detach(dev_info_t *dip, ddi_detach_cmd_t cmd); static uint_t rmclomv_break_intr(caddr_t arg); static int rmclomv_add_intr_handlers(void); static int rmclomv_remove_intr_handlers(void); static uint_t rmclomv_event_data_handler(char *); static void rmclomv_dr_data_handler(const char *, int); static int rmclomv_open(dev_t *dev_p, int flag, int otyp, cred_t *cred_p); static int rmclomv_close(dev_t dev, int flag, int otyp, cred_t *cred_p); static int rmclomv_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, cred_t *cred_p, int *rval_p); static void rmclomv_checkrmc_start(void); static void rmclomv_checkrmc_destroy(void); static void rmclomv_checkrmc_wakeup(void *); static void rmclomv_refresh_start(void); static void rmclomv_refresh_destroy(void); static void rmclomv_refresh_wakeup(void); static void rmclomv_reset_cache(rmclomv_cache_section_t *new_chain, rmclomv_cache_section_t *new_subchain, dp_get_sysinfo_r_t *sysinfo); static rmclomv_cache_section_t *rmclomv_find_section( rmclomv_cache_section_t *start, uint16_t sensor); static rmclomv_cache_section_t *create_cache_section(int sensor_type, int num); static int get_sensor_by_name(const rmclomv_cache_section_t *section, const char *name, int *index); static int validate_section_entry(rmclomv_cache_section_t *section, int index); static int add_names_to_section(rmclomv_cache_section_t *section); static void free_section(rmclomv_cache_section_t *section); static void add_section(rmclomv_cache_section_t **head, rmclomv_cache_section_t *section); static int rmclomv_do_cmd(int req_cmd, int resp_cmd, int resp_len, intptr_t arg_req, intptr_t arg_res); static void refresh_name_cache(int force_fail); static void set_val_unav(envmon_sensor_t *sensor); static void set_fan_unav(envmon_fan_t *fan); static int do_psu_cmd(intptr_t arg, int mode, envmon_indicator_t *env_ind, dp_get_psu_status_t *rmc_psu, dp_get_psu_status_r_t *rmc_psu_r, int detector_type); static uint_t rmc_set_watchdog_timer(uint_t timeoutval); static uint_t rmc_clear_watchdog_timer(void); static void send_watchdog_msg(int msg); static void plat_timesync(void *arg); /* * Driver entry points */ static struct cb_ops rmclomv_cb_ops = { rmclomv_open, /* open */ rmclomv_close, /* close */ nodev, /* strategy() */ nodev, /* print() */ nodev, /* dump() */ nodev, /* read() */ nodev, /* write() */ rmclomv_ioctl, /* ioctl() */ nodev, /* devmap() */ nodev, /* mmap() */ ddi_segmap, /* segmap() */ nochpoll, /* poll() */ ddi_prop_op, /* prop_op() */ NULL, /* cb_str */ D_NEW | D_MP /* cb_flag */ }; static struct dev_ops rmclomv_ops = { DEVO_REV, 0, /* ref count */ rmclomv_getinfo, /* getinfo() */ nulldev, /* identify() */ nulldev, /* probe() */ rmclomv_attach, /* attach() */ rmclomv_detach, /* detach */ nodev, /* reset */ &rmclomv_cb_ops, /* pointer to cb_ops structure */ (struct bus_ops *)NULL, nulldev /* power() */ }; /* * Loadable module support. */ extern struct mod_ops mod_driverops; static struct modldrv modldrv = { &mod_driverops, /* Type of module. This is a driver */ "rmclomv control driver v%I%", /* Name of the module */ &rmclomv_ops /* pointer to the dev_ops structure */ }; static struct modlinkage modlinkage = { MODREV_1, &modldrv, NULL }; /* * Device info */ static dev_info_t *rmclomv_dip = NULL; static int rmclomv_break_requested = B_FALSE; static ddi_softintr_t rmclomv_softintr_id; static ddi_iblock_cookie_t rmclomv_soft_iblock_cookie; extern void (*abort_seq_handler)(); /* key_position is effective key-position. Set to locked if unknown */ static rsci8 key_position = RMC_KEYSWITCH_POS_LOCKED; /* real_key_position starts off as unknown and records value actually seen */ static rsci8 real_key_position = RMC_KEYSWITCH_POS_UNKNOWN; static void rmclomv_abort_seq_handler(char *msg); /* * mutexes which protect the interrupt handlers. */ static kmutex_t rmclomv_event_hdlr_lock; static kmutex_t rmclomv_refresh_lock; static kcondvar_t rmclomv_refresh_sig_cv; static kmutex_t rmclomv_checkrmc_lock; static kcondvar_t rmclomv_checkrmc_sig_cv; /* * mutex to protect the handle_name cache */ static kmutex_t rmclomv_cache_lock; /* * mutex to protect the RMC state */ static kmutex_t rmclomv_state_lock; /* * Payloads of the event handlers. */ static dp_event_notification_t rmclomv_event_payload; static rmc_comm_msg_t rmclomv_event_payload_msg; /* * Checkrmc commands.. */ #define RMCLOMV_CHECKRMC_EXITNOW (-1) #define RMCLOMV_CHECKRMC_WAIT 0 #define RMCLOMV_CHECKRMC_PROCESSNOW 1 /* * Checkrmc thread state */ static int rmclomv_checkrmc_sig = RMCLOMV_CHECKRMC_WAIT; static kt_did_t rmclomv_checkrmc_tid = 0; /* * RMC state data */ #define RMCLOMV_RMCSTATE_UNKNOWN 0 #define RMCLOMV_RMCSTATE_OK 1 #define RMCLOMV_RMCSTATE_FAILED 2 #define RMCLOMV_RMCSTATE_DOWNLOAD 3 /* * RMC error indicator values (status from last RMC command) */ #define RMCLOMV_RMCERROR_NONE 0 /* fail RMC after 5 minutes without a good response */ #define RMCLOMV_RMCFAILTHRESHOLD 5 /* * rmclomv_rmc_state is the state reported in OperationalStatus. * rmclomv_rmc_error reflects the result of the last RMC interaction. * rmclomv_rmcfailcount is used by the rmclomv_checkrmc thread to count * failures in its regular status polls. Once RMCLOMV_RMCFAILTHRESHOLD * is reached, rmclomv_rmc_state is marked as RMCLOMV_RMCSTATE_FAILED. */ static int rmclomv_rmc_state = RMCLOMV_RMCSTATE_UNKNOWN; static int rmclomv_rmc_error = RMCLOMV_RMCERROR_NONE; static int rmclomv_rmcfailcount; /* * Refresh commands.. */ #define RMCLOMV_REFRESH_EXITNOW (-1) #define RMCLOMV_REFRESH_WAIT 0 #define RMCLOMV_REFRESH_PROCESSNOW 1 /* * Refresh thread state */ static int rmclomv_refresh_sig = RMCLOMV_REFRESH_WAIT; static kt_did_t rmclomv_refresh_tid = 0; /* * timeout id */ static timeout_id_t timer_id; /* * Handle-name cache */ #define LOCK_CACHE mutex_enter(&rmclomv_cache_lock); #define RELEASE_CACHE mutex_exit(&rmclomv_cache_lock); static rmclomv_cache_section_t *rmclomv_cache; /* main handle-names */ static rmclomv_cache_section_t *rmclomv_subcache; /* derived names */ static dp_get_sysinfo_r_t rmclomv_sysinfo_data; static boolean_t rmclomv_sysinfo_valid; static int rmclomv_cache_valid; extern pri_t maxclsyspri; /* * static strings */ static const char str_percent[] = "%"; static const char str_rpm[] = " rpm"; static const char str_ip_volts_ind[] = "P_PWR"; static const char str_ip2_volts_ind[] = "P_PWR2"; static const char str_ff_pok_ind[] = "FF_POK"; static const char str_vlo_volts_ind[] = "FF_UV"; static const char str_vhi_volts_ind[] = "FF_OV"; static const char str_chi_amps_ind[] = "FF_OC"; static const char str_chi_nr_ind[] = "FF_NR"; static const char str_ot_tmpr_ind[] = "FF_OT"; static const char str_fan_ind[] = "FF_FAN"; static const char str_pdct_fan_ind[] = "FF_PDCT_FAN"; static const char str_sc[] = "SC"; int _init(void) { int error = 0; mutex_init(&rmclomv_event_hdlr_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&rmclomv_checkrmc_lock, NULL, MUTEX_DRIVER, NULL); mutex_init(&rmclomv_refresh_lock, NULL, MUTEX_DRIVER, NULL); mutex_init(&rmclomv_cache_lock, NULL, MUTEX_DRIVER, NULL); mutex_init(&rmclomv_state_lock, NULL, MUTEX_DRIVER, NULL); cv_init(&rmclomv_checkrmc_sig_cv, NULL, CV_DRIVER, NULL); cv_init(&rmclomv_refresh_sig_cv, NULL, CV_DRIVER, NULL); error = mod_install(&modlinkage); if (error) { cv_destroy(&rmclomv_refresh_sig_cv); cv_destroy(&rmclomv_checkrmc_sig_cv); mutex_destroy(&rmclomv_state_lock); mutex_destroy(&rmclomv_cache_lock); mutex_destroy(&rmclomv_refresh_lock); mutex_destroy(&rmclomv_checkrmc_lock); mutex_destroy(&rmclomv_event_hdlr_lock); } return (error); } int _info(struct modinfo *modinfop) { return (mod_info(&modlinkage, modinfop)); } int _fini(void) { int error = 0; error = mod_remove(&modlinkage); if (error) return (error); cv_destroy(&rmclomv_refresh_sig_cv); cv_destroy(&rmclomv_checkrmc_sig_cv); mutex_destroy(&rmclomv_state_lock); mutex_destroy(&rmclomv_cache_lock); mutex_destroy(&rmclomv_refresh_lock); mutex_destroy(&rmclomv_checkrmc_lock); mutex_destroy(&rmclomv_event_hdlr_lock); return (error); } /* ARGSUSED */ static int rmclomv_getinfo(dev_info_t *dip, ddi_info_cmd_t cmd, void *arg, void **resultp) { minor_t m = getminor((dev_t)arg); switch (cmd) { case DDI_INFO_DEVT2DEVINFO: if ((m != 0) || (rmclomv_dip == NULL)) { *resultp = NULL; return (DDI_FAILURE); } *resultp = rmclomv_dip; return (DDI_SUCCESS); case DDI_INFO_DEVT2INSTANCE: *resultp = (void *)(uintptr_t)m; return (DDI_SUCCESS); default: return (DDI_FAILURE); } } static int rmclomv_attach(dev_info_t *dip, ddi_attach_cmd_t cmd) { int instance; int err; char *wdog_state; int attaching = 1; switch (cmd) { case DDI_ATTACH: /* * only allow one instance */ instance = ddi_get_instance(dip); if (instance != 0) return (DDI_FAILURE); err = ddi_create_minor_node(dip, "rmclomv", S_IFCHR, instance, DDI_PSEUDO, NULL); if (err != DDI_SUCCESS) return (DDI_FAILURE); /* * Register with rmc_comm to prevent it being detached * (in the unlikely event that its attach succeeded on a * platform whose platmod doesn't lock it down). */ err = rmc_comm_register(); if (err != DDI_SUCCESS) { ddi_remove_minor_node(dip, NULL); return (DDI_FAILURE); } /* Remember the dev info */ rmclomv_dip = dip; /* * Add the handlers which watch for unsolicited messages * and post event to Sysevent Framework. */ err = rmclomv_add_intr_handlers(); if (err != DDI_SUCCESS) { rmc_comm_unregister(); ddi_remove_minor_node(dip, NULL); rmclomv_dip = NULL; return (DDI_FAILURE); } rmclomv_checkrmc_start(); rmclomv_refresh_start(); abort_seq_handler = rmclomv_abort_seq_handler; ddi_report_dev(dip); /* * Check whether we have an application watchdog */ if (ddi_prop_lookup_string(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, RMCLOMV_WATCHDOG_MODE, &wdog_state) == DDI_PROP_SUCCESS) { if (strcmp(wdog_state, "app") == 0) { rmclomv_watchdog_mode = 1; watchdog_enable = 0; } else rmclomv_watchdog_mode = 0; ddi_prop_free(wdog_state); } tod_ops.tod_set_watchdog_timer = rmc_set_watchdog_timer; tod_ops.tod_clear_watchdog_timer = rmc_clear_watchdog_timer; /* * Now is a good time to activate hardware watchdog * (if one exists). */ mutex_enter(&tod_lock); if (watchdog_enable && tod_ops.tod_set_watchdog_timer != NULL) err = tod_ops.tod_set_watchdog_timer(0); mutex_exit(&tod_lock); if (err != 0) printf("Hardware watchdog enabled\n"); /* * Set time interval and start timesync routine. * Also just this once set the Solaris clock * to the RMC clock. */ timesync_interval = drv_usectohz(5*60 * MICROSEC); plat_timesync((void *) &attaching); return (DDI_SUCCESS); case DDI_RESUME: return (DDI_SUCCESS); default: return (DDI_FAILURE); } } static int rmclomv_detach(dev_info_t *dip, ddi_detach_cmd_t cmd) { int instance; int err; switch (cmd) { case DDI_DETACH: instance = ddi_get_instance(dip); if (instance != 0) return (DDI_FAILURE); /* * Remove the handlers which watch for unsolicited messages * and post event to Sysevent Framework. */ err = rmclomv_remove_intr_handlers(); if (err != DDI_SUCCESS) { cmn_err(CE_WARN, "Failed to remove event handlers"); return (DDI_FAILURE); } rmclomv_checkrmc_destroy(); rmclomv_refresh_destroy(); rmclomv_reset_cache(NULL, NULL, NULL); ddi_remove_minor_node(dip, NULL); /* Forget the dev info */ rmclomv_dip = NULL; rmc_comm_unregister(); return (DDI_SUCCESS); case DDI_SUSPEND: return (DDI_SUCCESS); default: return (DDI_FAILURE); } } static int rmclomv_add_intr_handlers() { int err; if (ddi_get_soft_iblock_cookie(rmclomv_dip, DDI_SOFTINT_HIGH, &rmclomv_soft_iblock_cookie) != DDI_SUCCESS) { return (DDI_FAILURE); } err = ddi_add_softintr(rmclomv_dip, DDI_SOFTINT_HIGH, &rmclomv_softintr_id, &rmclomv_soft_iblock_cookie, NULL, rmclomv_break_intr, NULL); if (err != DDI_SUCCESS) return (DDI_FAILURE); rmclomv_event_payload_msg.msg_buf = (caddr_t)&rmclomv_event_payload; rmclomv_event_payload_msg.msg_len = sizeof (rmclomv_event_payload); err = rmc_comm_reg_intr(DP_RMC_EVENTS, rmclomv_event_data_handler, &rmclomv_event_payload_msg, NULL, &rmclomv_event_hdlr_lock); if (err != 0) { ddi_remove_softintr(rmclomv_softintr_id); return (DDI_FAILURE); } return (DDI_SUCCESS); } static int rmclomv_remove_intr_handlers(void) { int err = rmc_comm_unreg_intr(DP_RMC_EVENTS, rmclomv_event_data_handler); if (err != 0) { cmn_err(CE_WARN, "Failed to unregister DP_RMC_EVENTS " "handler. Err=%d", err); return (DDI_FAILURE); } ddi_remove_softintr(rmclomv_softintr_id); return (DDI_SUCCESS); } static void rmclomv_abort_seq_handler(char *msg) { if (key_position == RMC_KEYSWITCH_POS_LOCKED) cmn_err(CE_CONT, "KEY in LOCKED position, " "ignoring debug enter sequence"); else { rmclomv_break_requested = B_TRUE; if (msg != NULL) prom_printf("%s\n", msg); ddi_trigger_softintr(rmclomv_softintr_id); } } /* ARGSUSED */ static uint_t rmclomv_break_intr(caddr_t arg) { if (rmclomv_break_requested) { rmclomv_break_requested = B_FALSE; debug_enter(NULL); return (DDI_INTR_CLAIMED); } return (DDI_INTR_UNCLAIMED); } /* * Create a cache section structure */ static rmclomv_cache_section_t * create_cache_section(int sensor_type, int num) { size_t len = offsetof(rmclomv_cache_section_t, entry[0]) + num * sizeof (rmclomv_cache_entry_t); rmclomv_cache_section_t *ptr = kmem_zalloc(len, KM_SLEEP); ptr->next_section = NULL; ptr->sensor_type = sensor_type; ptr->num_entries = num; ptr->section_len = len; return (ptr); } /* * Free a cache_section. */ static void free_section(rmclomv_cache_section_t *section) { size_t len = section->section_len; kmem_free(section, len); } /* * adds supplied section to end of cache chain * must be called with cache locked */ static void add_section(rmclomv_cache_section_t **head, rmclomv_cache_section_t *section) { section->next_section = *head; *head = section; } /* * This function releases all cache sections and exchanges the two * chain heads for new values. */ static void rmclomv_reset_cache(rmclomv_cache_section_t *new_chain, rmclomv_cache_section_t *new_subchain, dp_get_sysinfo_r_t *sysinfo) { rmclomv_cache_section_t *first; rmclomv_cache_section_t *sub_first; rmclomv_cache_section_t *next; LOCK_CACHE rmclomv_cache_valid = (new_chain != NULL); first = rmclomv_cache; rmclomv_cache = new_chain; sub_first = rmclomv_subcache; rmclomv_subcache = new_subchain; if (sysinfo == NULL) bzero(&rmclomv_sysinfo_data, sizeof (rmclomv_sysinfo_data)); else bcopy(sysinfo, &rmclomv_sysinfo_data, sizeof (rmclomv_sysinfo_data)); rmclomv_sysinfo_valid = (sysinfo != NULL); RELEASE_CACHE while (first != NULL) { next = first->next_section; free_section(first); first = next; } while (sub_first != NULL) { next = sub_first->next_section; free_section(sub_first); sub_first = next; } } /* * cache must be locked before calling rmclomv_find_section */ static rmclomv_cache_section_t * rmclomv_find_section(rmclomv_cache_section_t *start, uint16_t sensor) { rmclomv_cache_section_t *next = start; while ((next != NULL) && (next->sensor_type != sensor)) next = next->next_section; return (next); } /* * Return a string presenting the keyswitch position * For unknown values returns "Unknown" */ static char * rmclomv_key_position(enum rmc_keyswitch_pos pos) { switch (pos) { case RMC_KEYSWITCH_POS_NORMAL: return ("NORMAL"); case RMC_KEYSWITCH_POS_DIAG: return ("DIAG"); case RMC_KEYSWITCH_POS_LOCKED: return ("LOCKED"); case RMC_KEYSWITCH_POS_OFF: return ("STBY"); default: return ("UNKNOWN"); } } /* * The sensor id name is sought in the supplied section and if found * its index within the section is written to *index. * Return value is zero for success, otherwise -1. * The cache must be locked before calling get_sensor_by_name */ static int get_sensor_by_name(const rmclomv_cache_section_t *section, const char *name, int *index) { int i; for (i = 0; i < section->num_entries; i++) { if (strcmp(name, section->entry[i].handle_name.name) == 0) { *index = i; return (0); } } *index = 0; return (-1); } /* * fills in the envmon_handle name * if it is unknown (not cached), the dp_handle_t is returned as a hex-digit * string */ static void rmclomv_hdl_to_envhdl(dp_handle_t hdl, envmon_handle_t *envhdl) { rmclomv_cache_section_t *next; int i; LOCK_CACHE for (next = rmclomv_cache; next != NULL; next = next->next_section) { for (i = 0; i < next->num_entries; i++) { if (next->entry[i].handle == hdl) { *envhdl = next->entry[i].handle_name; RELEASE_CACHE return; } } } /* * Sought handle not currently cached. */ RELEASE_CACHE (void) snprintf(envhdl->name, sizeof (envhdl->name), "Unknown SC node 0x%x", hdl); } static void rmclomv_dr_data_handler(const char *fru_name, int hint) { int err = 0; nvlist_t *attr_list; char attach_pnt[MAXPATHLEN]; (void) snprintf(attach_pnt, sizeof (attach_pnt), "%s", fru_name); err = nvlist_alloc(&attr_list, NV_UNIQUE_NAME_TYPE, KM_NOSLEEP); if (err != 0) { cmn_err(CE_WARN, "Failed to allocate name-value list for %s event", EC_DR); return; } err = nvlist_add_string(attr_list, DR_AP_ID, attach_pnt); if (err != 0) { cmn_err(CE_WARN, "Failed to add attr [%s] for %s event", DR_AP_ID, EC_DR); nvlist_free(attr_list); return; } /* * Add the hint */ err = nvlist_add_string(attr_list, DR_HINT, SE_HINT2STR(hint)); if (err != 0) { cmn_err(CE_WARN, "Failed to add attr [%s] for %s event", DR_HINT, EC_DR); nvlist_free(attr_list); return; } err = ddi_log_sysevent(rmclomv_dip, DDI_VENDOR_SUNW, EC_DR, ESC_DR_AP_STATE_CHANGE, attr_list, NULL, DDI_NOSLEEP); if (err != 0) { cmn_err(CE_WARN, "Failed to log %s/%s event", DR_AP_ID, EC_DR); } nvlist_free(attr_list); } static void fan_sysevent(char *fru_name, char *sensor_name, int sub_event) { nvlist_t *attr_list; char fan_str[MAXNAMELEN]; int err; err = nvlist_alloc(&attr_list, NV_UNIQUE_NAME_TYPE, KM_NOSLEEP); if (err != 0) { cmn_err(CE_WARN, "Failed to allocate name-value list for %s/%s event", EC_ENV, ESC_ENV_FAN); return; } err = nvlist_add_string(attr_list, ENV_FRU_ID, fru_name); if (err != 0) { cmn_err(CE_WARN, "Failed to add attr [%s] for %s/%s event", ENV_FRU_ID, EC_ENV, ESC_ENV_FAN); nvlist_free(attr_list); return; } err = nvlist_add_string(attr_list, ENV_FRU_RESOURCE_ID, sensor_name); if (err != 0) { cmn_err(CE_WARN, "Failed to add attr [%s] for %s/%s event", ENV_FRU_RESOURCE_ID, EC_ENV, ESC_ENV_FAN); nvlist_free(attr_list); return; } err = nvlist_add_string(attr_list, ENV_FRU_DEVICE, ENV_RESERVED_ATTR); if (err != 0) { cmn_err(CE_WARN, "Failed to add attr [%s] for %s/%s event", ENV_FRU_DEVICE, EC_ENV, ESC_ENV_FAN); nvlist_free(attr_list); return; } err = nvlist_add_int32(attr_list, ENV_FRU_STATE, (sub_event == RMC_ENV_FAULT_EVENT) ? ENV_FAILED : ENV_OK); if (err != 0) { cmn_err(CE_WARN, "Failed to add attr [%s] for %s/%s event", ENV_FRU_STATE, EC_ENV, ESC_ENV_FAN); nvlist_free(attr_list); return; } if (sub_event == RMC_ENV_FAULT_EVENT) { (void) snprintf(fan_str, sizeof (fan_str), "fan %s/%s is now failed", fru_name, sensor_name); } else { (void) snprintf(fan_str, sizeof (fan_str), "fan %s/%s is now ok", fru_name, sensor_name); } err = nvlist_add_string(attr_list, ENV_MSG, fan_str); if (err != 0) { cmn_err(CE_WARN, "Failed to add attr [%s] for %s/%s event", ENV_MSG, EC_ENV, ESC_ENV_FAN); nvlist_free(attr_list); return; } err = ddi_log_sysevent(rmclomv_dip, DDI_VENDOR_SUNW, EC_ENV, ESC_ENV_FAN, attr_list, NULL, DDI_NOSLEEP); if (err != 0) { cmn_err(CE_WARN, "Failed to log %s/%s event", EC_ENV, ESC_ENV_FAN); } cmn_err(CE_NOTE, "%s", fan_str); nvlist_free(attr_list); } static void threshold_sysevent(char *fru_name, char *sensor_name, int sub_event, char event_type) { nvlist_t *attr_list; int err; char *subclass; char sensor_str[MAXNAMELEN]; subclass = (event_type == 'T') ? ESC_ENV_TEMP : ESC_ENV_POWER; err = nvlist_alloc(&attr_list, NV_UNIQUE_NAME_TYPE, KM_NOSLEEP); if (err != 0) { cmn_err(CE_WARN, "Failed to allocate name-value list for %s/%s event", EC_ENV, subclass); return; } err = nvlist_add_string(attr_list, ENV_FRU_ID, fru_name); if (err != 0) { cmn_err(CE_WARN, "Failed to add attr [%s] for %s/%s event", ENV_FRU_ID, EC_ENV, subclass); nvlist_free(attr_list); return; } err = nvlist_add_string(attr_list, ENV_FRU_RESOURCE_ID, sensor_name); if (err != 0) { cmn_err(CE_WARN, "Failed to add attr [%s] for %s/%s event", ENV_FRU_RESOURCE_ID, EC_ENV, subclass); nvlist_free(attr_list); return; } err = nvlist_add_string(attr_list, ENV_FRU_DEVICE, ENV_RESERVED_ATTR); if (err != 0) { cmn_err(CE_WARN, "Failed to add attr [%s] for %s/%s event", ENV_FRU_DEVICE, EC_ENV, subclass); nvlist_free(attr_list); return; } switch (sub_event) { case RMC_ENV_OK_EVENT: err = nvlist_add_int32(attr_list, ENV_FRU_STATE, ENV_OK); break; case RMC_ENV_WARNING_THRESHOLD_EVENT: err = nvlist_add_int32(attr_list, ENV_FRU_STATE, ENV_WARNING); break; case RMC_ENV_SHUTDOWN_THRESHOLD_EVENT: err = nvlist_add_int32(attr_list, ENV_FRU_STATE, ENV_FAILED); break; } if (err != 0) { cmn_err(CE_WARN, "Failed to add attr [%s] for %s/%s event", ENV_FRU_STATE, EC_ENV, subclass); nvlist_free(attr_list); return; } switch (sub_event) { case RMC_ENV_OK_EVENT: (void) snprintf(sensor_str, sizeof (sensor_str), "sensor %s/%s is now ok", fru_name, sensor_name); break; case RMC_ENV_WARNING_THRESHOLD_EVENT: (void) snprintf(sensor_str, sizeof (sensor_str), "sensor %s/%s is now outside warning thresholds", fru_name, sensor_name); break; case RMC_ENV_SHUTDOWN_THRESHOLD_EVENT: (void) snprintf(sensor_str, sizeof (sensor_str), "sensor %s/%s is now outside shutdown thresholds", fru_name, sensor_name); break; } err = nvlist_add_string(attr_list, ENV_MSG, sensor_str); if (err != 0) { cmn_err(CE_WARN, "Failed to add attr [%s] for %s/%s event", ENV_MSG, EC_ENV, subclass); nvlist_free(attr_list); return; } err = ddi_log_sysevent(rmclomv_dip, DDI_VENDOR_SUNW, EC_ENV, subclass, attr_list, NULL, DDI_NOSLEEP); if (err != 0) { cmn_err(CE_WARN, "Failed to log %s/%s event", EC_ENV, subclass); } cmn_err(CE_NOTE, "%s", sensor_str); nvlist_free(attr_list); } static uint_t rmclomv_event_data_handler(char *arg) { dp_event_notification_t *payload; rmc_comm_msg_t *msg; envmon_handle_t envhdl; int hint; char *ptr, *save_ptr; if (arg == NULL) { return (DDI_INTR_CLAIMED); } msg = (rmc_comm_msg_t *)arg; if (msg->msg_buf == NULL) { return (DDI_INTR_CLAIMED); } payload = (dp_event_notification_t *)msg->msg_buf; switch (payload->event) { case RMC_KEYSWITCH_EVENT: real_key_position = payload->event_info.ev_keysw.key_position; cmn_err(CE_NOTE, "keyswitch change event - state = %s", rmclomv_key_position(real_key_position)); if ((real_key_position != RMC_KEYSWITCH_POS_UNKNOWN) && (real_key_position <= RMC_KEYSWITCH_POS_OFF)) { key_position = real_key_position; } else { /* treat unknown key position as locked */ key_position = RMC_KEYSWITCH_POS_LOCKED; } break; case RMC_HPU_EVENT: /* * send appropriate sysevent */ switch (payload->event_info.ev_hpunot.sub_event) { case RMC_HPU_REMOVE_EVENT: hint = SE_HINT_REMOVE; break; case RMC_HPU_INSERT_EVENT: hint = SE_HINT_INSERT; break; default: hint = SE_NO_HINT; break; } rmclomv_hdl_to_envhdl(payload->event_info.ev_hpunot.hpu_hdl, &envhdl); rmclomv_dr_data_handler(envhdl.name, hint); break; case RMC_INIT_EVENT: /* * Wake up the refresh thread. */ rmclomv_refresh_wakeup(); /* * Wake up the checkrmc thread for an early indication to PICL */ rmclomv_checkrmc_wakeup(NULL); break; case RMC_ENV_EVENT: rmclomv_hdl_to_envhdl(payload->event_info.ev_envnot.env_hdl, &envhdl); /* split name into fru name and sensor name */ ptr = strchr(envhdl.name, '.'); /* must have at least one '.' */ if (ptr == NULL) break; /* find last '.' - convert the others to '/' */ for (;;) { save_ptr = ptr; ptr = strchr(ptr, '.'); if (ptr == NULL) { ptr = save_ptr; break; } *save_ptr = '/'; } *ptr = '\0'; ptr++; /* is it a voltage or temperature sensor? */ if ((*ptr == 'V' || *ptr == 'T') && *(ptr + 1) == '_') { switch (payload->event_info.ev_envnot.sub_event) { case RMC_ENV_WARNING_THRESHOLD_EVENT: case RMC_ENV_SHUTDOWN_THRESHOLD_EVENT: case RMC_ENV_OK_EVENT: threshold_sysevent(envhdl.name, ptr, payload->event_info.ev_envnot.sub_event, *ptr); break; default: break; } } /* * is it a fan sensor? * Fan sensor names end either in RS, F0 or F1 */ if ((*ptr == 'R' && *(ptr + 1) == 'S' && *(ptr + 2) == '\0') || (*ptr == 'F' && *(ptr + 1) == '0' && *(ptr + 2) == '\0') || (*ptr == 'F' && *(ptr + 1) == '1' && *(ptr + 2) == '\0')) { switch (payload->event_info.ev_envnot.sub_event) { case RMC_ENV_FAULT_EVENT: case RMC_ENV_OK_EVENT: fan_sysevent(envhdl.name, ptr, payload->event_info.ev_envnot.sub_event); break; default: break; } } break; case RMC_LOG_EVENT: { int level = 10; int flags = SL_NOTE | SL_CONSOLE; char *message = (char *)payload->event_info.ev_rmclog.log_record; message[ payload->event_info.ev_rmclog.log_record_size] = '\0'; /* * Logs have a 10 character prefix - specifying the severity of * the event being logged. Thus all the magic number 10s down * here */ if (0 == strncmp("CRITICAL: ", message, 10)) { message += 10; level = 0; flags = SL_FATAL | SL_ERROR | SL_CONSOLE; } else if (0 == strncmp("MAJOR: ", message, 10)) { message += 10; level = 5; flags = SL_WARN | SL_ERROR | SL_CONSOLE; } else if (0 == strncmp("MINOR: ", message, 10)) { message += 10; level = 10; flags = SL_NOTE | SL_CONSOLE; } (void) strlog(0, 0, level, flags, message); break; } default: return (DDI_INTR_CLAIMED); } return (DDI_INTR_CLAIMED); } /*ARGSUSED*/ static int rmclomv_open(dev_t *dev_p, int flag, int otyp, cred_t *cred_p) { int error = 0; int instance = getminor(*dev_p); if (instance != 0) return (ENXIO); if ((flag & FWRITE) != 0 && (error = drv_priv(cred_p)) != 0) return (error); return (0); } /*ARGSUSED*/ static int rmclomv_close(dev_t dev, int flag, int otyp, cred_t *cred_p) { return (DDI_SUCCESS); } static int rmclomv_do_cmd(int req_cmd, int resp_cmd, int resp_len, intptr_t arg_req, intptr_t arg_res) { rmc_comm_msg_t request, *reqp = &request; rmc_comm_msg_t response, *resp = &response; int rv = 0; bzero((caddr_t)&request, sizeof (request)); reqp->msg_type = req_cmd; reqp->msg_buf = (caddr_t)arg_req; bzero((caddr_t)&response, sizeof (response)); resp->msg_type = resp_cmd; resp->msg_buf = (caddr_t)arg_res; resp->msg_len = resp_len; switch (req_cmd) { case DP_GET_SYSINFO: resp->msg_len = sizeof (dp_get_sysinfo_r_t); break; case DP_GET_EVENT_LOG: resp->msg_len = sizeof (dp_get_event_log_r_t); break; case DP_GET_VOLTS: reqp->msg_len = sizeof (dp_get_volts_t); break; case DP_GET_TEMPERATURES: reqp->msg_len = sizeof (dp_get_temperatures_t); break; case DP_GET_CIRCUIT_BRKS: reqp->msg_len = sizeof (dp_get_circuit_brks_t); break; case DP_GET_FAN_STATUS: reqp->msg_len = sizeof (dp_get_fan_status_t); break; case DP_GET_PSU_STATUS: reqp->msg_len = sizeof (dp_get_psu_status_t); break; case DP_GET_LED_STATE: reqp->msg_len = sizeof (dp_get_led_state_t); break; case DP_SET_LED_STATE: reqp->msg_len = sizeof (dp_set_led_state_t); break; case DP_GET_FRU_STATUS: reqp->msg_len = sizeof (dp_get_fru_status_t); break; case DP_GET_HANDLE_NAME: reqp->msg_len = sizeof (dp_get_handle_name_t); break; case DP_GET_ALARM_STATE: reqp->msg_len = sizeof (dp_get_alarm_state_t); break; case DP_SET_ALARM_STATE: reqp->msg_len = sizeof (dp_set_alarm_state_t); break; case DP_GET_SDP_VERSION: resp->msg_len = sizeof (dp_get_sdp_version_r_t); break; case DP_GET_CHASSIS_SERIALNUM: reqp->msg_len = 0; break; case DP_GET_DATE_TIME: reqp->msg_len = 0; break; default: return (EINVAL); } rv = rmc_comm_request_response(reqp, resp, RMCLOMV_DEFAULT_MAX_MBOX_WAIT_TIME); if (rv != RCNOERR) { /* * RMC returned an error or failed to respond. * Where the RMC itself is implicated, rmclomv_rmc_error * is set non-zero. It is cleared after an error free exchange. * Two failure cases are distinguished: * RMCLOMV_RMCSTATE_FAILED and RMCLOMV_RMCSTATE_DOWNLOAD. */ switch (rv) { case RCENOSOFTSTATE: /* invalid/NULL soft state structure */ return (EIO); case RCENODATALINK: /* * firmware download in progress, * can you come back later? */ rmclomv_rmc_error = RMCLOMV_RMCSTATE_DOWNLOAD; rmclomv_rmc_state = RMCLOMV_RMCSTATE_DOWNLOAD; return (EAGAIN); case RCENOMEM: /* memory problems */ return (ENOMEM); case RCECANTRESEND: /* resend failed */ rmclomv_rmc_error = RMCLOMV_RMCSTATE_FAILED; return (EIO); case RCEMAXRETRIES: /* reply not received - retries exceeded */ rmclomv_rmc_error = RMCLOMV_RMCSTATE_FAILED; return (EINTR); case RCETIMEOUT: /* reply not received - command has timed out */ rmclomv_rmc_error = RMCLOMV_RMCSTATE_FAILED; return (EINTR); case RCEINVCMD: /* data protocol cmd not supported */ return (ENOTSUP); case RCEINVARG: /* invalid argument(s) */ return (ENOTSUP); case RCEGENERIC: /* generic error */ rmclomv_rmc_error = RMCLOMV_RMCSTATE_FAILED; return (EIO); default: rmclomv_rmc_error = RMCLOMV_RMCSTATE_FAILED; return (EIO); } } rmclomv_rmc_error = RMCLOMV_RMCERROR_NONE; return (0); } /* * validate_section_entry checks that the entry at the specified index * is valid and not duplicated by an entry above. If these tests fail * the entry is removed and B_FALSE returned. Otherwise returns B_TRUE. */ static int validate_section_entry(rmclomv_cache_section_t *section, int index) { int i; rmclomv_cache_entry_t *entry; for (i = index; i < section->num_entries; i++) { entry = §ion->entry[i]; if (entry->handle_name.name[0] == '\0') { cmn_err(CE_WARN, "rmclomv: empty handle_name, handle 0x%x type %x", entry->handle, section->sensor_type); } else if (entry->ind_mask != 0) { continue; /* skip special entries */ } else if (entry->handle == DP_NULL_HANDLE) { cmn_err(CE_WARN, "rmclomv: null handle id for \"%s\" type %x", entry->handle_name.name, section->sensor_type); } else if (i == index) { continue; } else if (section->entry[index].handle == entry->handle) { cmn_err(CE_WARN, "rmclomv: duplicate handle 0x%x type %x", entry->handle, section->sensor_type); } else if (strcmp(entry->handle_name.name, section->entry[index].handle_name.name) == 0) { cmn_err(CE_WARN, "rmclomv: duplicate handle_name \"%s\", " "handle 0x%x type %x", entry->handle_name.name, entry->handle, section->sensor_type); } else continue; /* * need to remove the entry at index */ section->num_entries--; for (i = index; i < section->num_entries; i++) { section->entry[i] = section->entry[i + 1]; } return (B_FALSE); } return (B_TRUE); } /* * Populate a section containing handles with corresponding names * The supplied section structure must not be publically visible and the * name cache must not be locked either (because RMC i/o is required). * * This is the place where a sanity check is applied. Entries containing * duplicate handles, duplicate names or empty names are removed and the * structure is compacted. As a result num_entries may be reduced. */ static int add_names_to_section(rmclomv_cache_section_t *section) { int retval = 0; int ditched = B_FALSE; int index; dp_get_handle_name_r_t handle_name_r; rmclomv_cache_entry_t *entry; for (index = 0; index < section->num_entries; index++) { entry = §ion->entry[index]; if (entry->ind_mask != 0) continue; /* skip special entries */ handle_name_r.handle = entry->handle; retval = rmclomv_do_cmd(DP_GET_HANDLE_NAME, DP_GET_HANDLE_NAME_R, sizeof (handle_name_r), (intptr_t)&handle_name_r, (intptr_t)&handle_name_r); if (retval == 0) bcopy(handle_name_r.name, entry->handle_name.name, DP_MAX_HANDLE_NAME); } /* * now ditch invalid and duplicate entries */ for (index = 0; index < section->num_entries; index++) { while (validate_section_entry(section, index) == B_FALSE) ditched = B_TRUE; } if (ditched) cmn_err(CE_WARN, "Retaining %d nodes of type %d", section->num_entries, section->sensor_type); return (retval); } /* * The supplied (PSU) cache section is traversed and entries are created * for the individual indicators belonging to a PSU. These entries are * placed in a private chain. The caller, subsequently acquires the * cache lock and copies the chain head to make it public. * The handle-names for PSU indicators are derived from the parent PSU * handle-name. * NOTE: add_names_to_section() may have reduced psu_section->num_entries * so DON'T USE psu_resp->num_psus */ static void make_psu_subsections(rmclomv_cache_section_t *psu_section, rmclomv_cache_section_t **chain_head, dp_get_psu_status_r_t *psu_resp) { int index; int subindex = 0; rmclomv_cache_section_t *subsection; rmclomv_cache_entry_t *src_entry; rmclomv_cache_entry_t *dst_entry; subsection = create_cache_section(RMCLOMV_VOLT_IND, RMCLOMV_MAX_VI_PER_PSU * psu_section->num_entries); for (index = 0; index < psu_section->num_entries; index++) { src_entry = &psu_section->entry[index]; if ((psu_resp->psu_status[index].mask & DP_PSU_INPUT_STATUS) != 0) { dst_entry = &subsection->entry[subindex++]; dst_entry->handle = src_entry->handle; dst_entry->ind_mask = DP_PSU_INPUT_STATUS; (void) snprintf(dst_entry->handle_name.name, ENVMON_MAXNAMELEN, "%s.%s", src_entry->handle_name.name, str_ip_volts_ind); } if ((psu_resp->psu_status[index].mask & DP_PSU_SEC_INPUT_STATUS) != 0) { dst_entry = &subsection->entry[subindex++]; dst_entry->handle = src_entry->handle; dst_entry->ind_mask = DP_PSU_SEC_INPUT_STATUS; (void) snprintf(dst_entry->handle_name.name, ENVMON_MAXNAMELEN, "%s.%s", src_entry->handle_name.name, str_ip2_volts_ind); } if ((psu_resp->psu_status[index].mask & DP_PSU_OUTPUT_STATUS) != 0) { dst_entry = &subsection->entry[subindex++]; dst_entry->handle = src_entry->handle; dst_entry->ind_mask = DP_PSU_OUTPUT_STATUS; (void) snprintf(dst_entry->handle_name.name, ENVMON_MAXNAMELEN, "%s.%s", src_entry->handle_name.name, str_ff_pok_ind); } if ((psu_resp->psu_status[index].mask & DP_PSU_OUTPUT_VLO_STATUS) != 0) { dst_entry = &subsection->entry[subindex++]; dst_entry->handle = src_entry->handle; dst_entry->ind_mask = DP_PSU_OUTPUT_VLO_STATUS; (void) snprintf(dst_entry->handle_name.name, ENVMON_MAXNAMELEN, "%s.%s", src_entry->handle_name.name, str_vlo_volts_ind); } if ((psu_resp->psu_status[index].mask & DP_PSU_OUTPUT_VHI_STATUS) != 0) { dst_entry = &subsection->entry[subindex++]; dst_entry->handle = src_entry->handle; dst_entry->ind_mask = DP_PSU_OUTPUT_VHI_STATUS; (void) snprintf(dst_entry->handle_name.name, ENVMON_MAXNAMELEN, "%s.%s", src_entry->handle_name.name, str_vhi_volts_ind); } } /* * Adjust number of entries value in cache section * to match the facts. */ subsection->num_entries = subindex; add_section(chain_head, subsection); subsection = create_cache_section(RMCLOMV_AMP_IND, RMCLOMV_MAX_CI_PER_PSU * psu_section->num_entries); subindex = 0; for (index = 0; index < psu_section->num_entries; index++) { int mask = psu_resp->psu_status[index].mask; src_entry = &psu_section->entry[index]; if ((mask & DP_PSU_OUTPUT_AHI_STATUS) != 0) { dst_entry = &subsection->entry[subindex++]; dst_entry->handle = src_entry->handle; dst_entry->ind_mask = DP_PSU_OUTPUT_AHI_STATUS; (void) snprintf(dst_entry->handle_name.name, ENVMON_MAXNAMELEN, "%s.%s", src_entry->handle_name.name, str_chi_amps_ind); } if ((mask & DP_PSU_NR_WARNING) != 0) { dst_entry = &subsection->entry[subindex++]; dst_entry->handle = src_entry->handle; dst_entry->ind_mask = DP_PSU_NR_WARNING; (void) snprintf(dst_entry->handle_name.name, ENVMON_MAXNAMELEN, "%s.%s", src_entry->handle_name.name, str_chi_nr_ind); } } subsection->num_entries = subindex; add_section(chain_head, subsection); subsection = create_cache_section(RMCLOMV_TEMP_IND, psu_section->num_entries); subindex = 0; for (index = 0; index < psu_section->num_entries; index++) { if ((psu_resp->psu_status[index].mask & DP_PSU_OVERTEMP_FAULT) != 0) { src_entry = &psu_section->entry[index]; dst_entry = &subsection->entry[subindex++]; dst_entry->handle = src_entry->handle; dst_entry->ind_mask = DP_PSU_OVERTEMP_FAULT; (void) snprintf(dst_entry->handle_name.name, ENVMON_MAXNAMELEN, "%s.%s", src_entry->handle_name.name, str_ot_tmpr_ind); } } subsection->num_entries = subindex; add_section(chain_head, subsection); subsection = create_cache_section(RMCLOMV_FAN_IND, RMCLOMV_MAX_FI_PER_PSU * psu_section->num_entries); subindex = 0; for (index = 0; index < psu_section->num_entries; index++) { int mask = psu_resp->psu_status[index].mask; src_entry = &psu_section->entry[index]; if ((mask & DP_PSU_FAN_FAULT) != 0) { dst_entry = &subsection->entry[subindex++]; dst_entry->handle = src_entry->handle; dst_entry->ind_mask = DP_PSU_FAN_FAULT; (void) snprintf(dst_entry->handle_name.name, ENVMON_MAXNAMELEN, "%s.%s", src_entry->handle_name.name, str_fan_ind); } if ((mask & DP_PSU_PDCT_FAN) != 0) { dst_entry = &subsection->entry[subindex++]; dst_entry->handle = src_entry->handle; dst_entry->ind_mask = DP_PSU_PDCT_FAN; (void) snprintf(dst_entry->handle_name.name, ENVMON_MAXNAMELEN, "%s.%s", src_entry->handle_name.name, str_pdct_fan_ind); } } subsection->num_entries = subindex; add_section(chain_head, subsection); } static void refresh_name_cache(int force_fail) { union { dp_get_volts_t u_volts_cmd; dp_get_temperatures_t u_temp_cmd; dp_get_circuit_brks_t u_ampi_cmd; dp_get_fan_status_t u_fan_cmd; dp_get_psu_status_t u_psu_cmd; dp_get_fru_status_t u_fru_cmd; dp_get_led_state_t u_led_cmd; dp_set_led_state_t u_setled_cmd; dp_get_alarm_state_t u_alarm_cmd; dp_set_alarm_state_t u_setalarm_cmd; } rmc_cmdbuf; /* defines for accessing union fields */ #define volts_cmd rmc_cmdbuf.u_volts_cmd #define temp_cmd rmc_cmdbuf.u_temp_cmd #define ampi_cmd rmc_cmdbuf.u_ampi_cmd #define fan_cmd rmc_cmdbuf.u_fan_cmd #define psu_cmd rmc_cmdbuf.u_psu_cmd #define fru_cmd rmc_cmdbuf.u_fru_cmd #define led_cmd rmc_cmdbuf.u_led_cmd #define setled_cmd rmc_cmdbuf.u_setled_cmd #define alarm_cmd rmc_cmdbuf.u_alarm_cmd #define setalarm_cmd rmc_cmdbuf.u_setalarm_cmd /* * Data area to read sensor data into */ static union { char reservation[RMCRESBUFLEN]; dp_get_volts_r_t u_volts_r; dp_get_temperatures_r_t u_temp_r; dp_get_circuit_brks_r_t u_ampi_r; dp_get_fan_status_r_t u_fan_r; dp_get_psu_status_r_t u_psu_r; dp_get_fru_status_r_t u_fru_r; dp_get_led_state_r_t u_led_r; dp_set_led_state_r_t u_setled_r; dp_get_alarm_state_r_t u_alarm_r; dp_set_alarm_state_r_t u_setalarm_r; } rmc_sensbuf; /* defines for accessing union fields */ #define volts_r rmc_sensbuf.u_volts_r #define temp_r rmc_sensbuf.u_temp_r #define ampi_r rmc_sensbuf.u_ampi_r #define fan_r rmc_sensbuf.u_fan_r #define psu_r rmc_sensbuf.u_psu_r #define fru_r rmc_sensbuf.u_fru_r #define led_r rmc_sensbuf.u_led_r #define setled_r rmc_sensbuf.u_setled_r #define alarm_r rmc_sensbuf.u_alarm_r #define setalarm_r rmc_sensbuf.u_setalarm_r int retval = force_fail; int retval1 = retval; int index; rmclomv_cache_section_t *my_chain = NULL; rmclomv_cache_section_t *derived_chain = NULL; rmclomv_cache_section_t *section; rmclomv_cache_section_t *psu_section; rmclomv_cache_section_t *fru_section; dp_get_sysinfo_r_t sysinfo; rmclomv_cache_entry_t *entry; if (retval == 0) { retval = rmclomv_do_cmd(DP_GET_SYSINFO, DP_GET_SYSINFO_R, sizeof (sysinfo), NULL, (intptr_t)&sysinfo); } if (retval == 0) { fru_cmd.handle = DP_NULL_HANDLE; retval = rmclomv_do_cmd(DP_GET_FRU_STATUS, DP_GET_FRU_STATUS_R, RMCRESBUFLEN, (intptr_t)&fru_cmd, (intptr_t)&fru_r); } if (retval != 0) fru_r.num_frus = 0; /* * Reserve space for special additional entries in the FRU section */ fru_section = create_cache_section(RMCLOMV_HPU_IND, RMCLOMV_NUM_SPECIAL_FRUS + fru_r.num_frus); /* * add special entry for RMC itself */ entry = &fru_section->entry[0]; (void) snprintf(entry->handle_name.name, sizeof (envmon_handle_t), "SC"); entry->handle = 0; entry->ind_mask = 1; /* flag as a special entry */ /* * populate any other FRU entries */ for (index = 0; index < fru_r.num_frus; index++) { fru_section->entry[RMCLOMV_NUM_SPECIAL_FRUS + index].handle = fru_r.fru_status[index].handle; fru_section->entry[RMCLOMV_NUM_SPECIAL_FRUS + index].ind_mask = 0; } my_chain = fru_section; if (retval == 0) { volts_cmd.handle = DP_NULL_HANDLE; retval = rmclomv_do_cmd(DP_GET_VOLTS, DP_GET_VOLTS_R, RMCRESBUFLEN, (intptr_t)&volts_cmd, (intptr_t)&volts_r); } if (retval == 0) { section = create_cache_section(RMCLOMV_VOLT_SENS, volts_r.num_volts); for (index = 0; index < volts_r.num_volts; index++) { section->entry[index].handle = volts_r.volt_status[index].handle; } add_section(&my_chain, section); } if (retval == 0) { temp_cmd.handle = DP_NULL_HANDLE; retval = rmclomv_do_cmd(DP_GET_TEMPERATURES, DP_GET_TEMPERATURES_R, RMCRESBUFLEN, (intptr_t)&temp_cmd, (intptr_t)&temp_r); } if (retval == 0) { section = create_cache_section(RMCLOMV_TEMP_SENS, temp_r.num_temps); for (index = 0; index < temp_r.num_temps; index++) { section->entry[index].handle = temp_r.temp_status[index].handle; } add_section(&my_chain, section); } if (retval == 0) { fan_cmd.handle = DP_NULL_HANDLE; retval = rmclomv_do_cmd(DP_GET_FAN_STATUS, DP_GET_FAN_STATUS_R, RMCRESBUFLEN, (intptr_t)&fan_cmd, (intptr_t)&fan_r); } if (retval == 0) { section = create_cache_section(RMCLOMV_FAN_SENS, fan_r.num_fans); for (index = 0; index < fan_r.num_fans; index++) { section->entry[index].handle = fan_r.fan_status[index].handle; } add_section(&my_chain, section); } if (retval == 0) { ampi_cmd.handle = DP_NULL_HANDLE; retval = rmclomv_do_cmd(DP_GET_CIRCUIT_BRKS, DP_GET_CIRCUIT_BRKS_R, RMCRESBUFLEN, (intptr_t)&i_cmd, (intptr_t)&i_r); } if (retval == 0) { section = create_cache_section(RMCLOMV_AMP_IND, ampi_r.num_circuit_brks); for (index = 0; index < ampi_r.num_circuit_brks; index++) { section->entry[index].handle = ampi_r.circuit_brk_status[index].handle; } add_section(&my_chain, section); } if (retval == 0) { led_cmd.handle = DP_NULL_HANDLE; retval = rmclomv_do_cmd(DP_GET_LED_STATE, DP_GET_LED_STATE_R, RMCRESBUFLEN, (intptr_t)&led_cmd, (intptr_t)&led_r); } if (retval == 0) { section = create_cache_section(RMCLOMV_LED_IND, led_r.num_leds); for (index = 0; index < led_r.num_leds; index++) { section->entry[index].handle = led_r.led_state[index].handle; } add_section(&my_chain, section); } /* * The command DP_GET_ALARM_STATE may not be valid on * some RMC versions, so we ignore the return value * and proceed */ if (retval == 0) { alarm_cmd.handle = DP_NULL_HANDLE; retval1 = rmclomv_do_cmd(DP_GET_ALARM_STATE, DP_GET_ALARM_STATE_R, RMCRESBUFLEN, (intptr_t)&alarm_cmd, (intptr_t)&alarm_r); if ((retval1 == 0) && alarm_r.num_alarms) { section = create_cache_section(RMCLOMV_ALARM_IND, alarm_r.num_alarms); for (index = 0; index < alarm_r.num_alarms; index++) { section->entry[index].handle = alarm_r.alarm_state[index].handle; } add_section(&my_chain, section); } } if (retval == 0) { psu_cmd.handle = DP_NULL_HANDLE; retval = rmclomv_do_cmd(DP_GET_PSU_STATUS, DP_GET_PSU_STATUS_R, RMCRESBUFLEN, (intptr_t)&psu_cmd, (intptr_t)&psu_r); } if (retval == 0) { /* * WARNING: * ======= * The PSUs must be probed last so that the response data * (psu_r) is available for make_psu_subsections() below. * Note that all the responses share the same data area * which is declared as a union. */ psu_section = create_cache_section(RMCLOMV_PSU_IND, psu_r.num_psus); for (index = 0; index < psu_r.num_psus; index++) { psu_section->entry[index].handle = psu_r.psu_status[index].handle; } add_section(&my_chain, psu_section); } if (retval == 0) { for (section = my_chain; section != NULL; section = section->next_section) { retval = add_names_to_section(section); if (retval != 0) { break; } } } /* * now add nodes derived from PSUs */ if (retval == 0) { make_psu_subsections(psu_section, &derived_chain, &psu_r); /* * name cache sections all set, exchange new for old */ rmclomv_reset_cache(my_chain, derived_chain, &sysinfo); } else { /* * RMC is not responding, ditch any existing cache * and just leave the special SC FRU node */ rmclomv_reset_cache(my_chain, NULL, NULL); } } static void set_val_unav(envmon_sensor_t *sensor) { sensor->value = ENVMON_VAL_UNAVAILABLE; sensor->lowthresholds.warning = ENVMON_VAL_UNAVAILABLE; sensor->lowthresholds.shutdown = ENVMON_VAL_UNAVAILABLE; sensor->lowthresholds.poweroff = ENVMON_VAL_UNAVAILABLE; sensor->highthresholds.warning = ENVMON_VAL_UNAVAILABLE; sensor->highthresholds.shutdown = ENVMON_VAL_UNAVAILABLE; sensor->highthresholds.poweroff = ENVMON_VAL_UNAVAILABLE; } static void set_fan_unav(envmon_fan_t *fan) { fan->speed = ENVMON_VAL_UNAVAILABLE; fan->units[0] = '\0'; fan->lowthresholds.warning = ENVMON_VAL_UNAVAILABLE; fan->lowthresholds.shutdown = ENVMON_VAL_UNAVAILABLE; fan->lowthresholds.poweroff = ENVMON_VAL_UNAVAILABLE; } static int do_psu_cmd(intptr_t arg, int mode, envmon_indicator_t *env_ind, dp_get_psu_status_t *rmc_psu, dp_get_psu_status_r_t *rmc_psu_r, int detector_type) { int index; uint16_t sensor_status; rmclomv_cache_section_t *section; uint16_t indicator_mask; if (ddi_copyin((caddr_t)arg, (caddr_t)env_ind, sizeof (envmon_indicator_t), mode) != 0) return (EFAULT); /* ensure we've got PSU handles cached */ LOCK_CACHE sensor_status = ENVMON_SENSOR_OK; section = rmclomv_find_section(rmclomv_subcache, detector_type); if (env_ind->id.name[0] == '\0') { /* request for first handle */ if ((section == NULL) || (section->num_entries == 0)) env_ind->next_id.name[0] = '\0'; else env_ind->next_id = section->entry[0].handle_name; sensor_status = ENVMON_NOT_PRESENT; } else { /* ensure name is properly terminated */ env_ind->id.name[ENVMON_MAXNAMELEN - 1] = '\0'; if ((section == NULL) || (get_sensor_by_name(section, env_ind->id.name, &index)) != 0) { env_ind->next_id.name[0] = '\0'; sensor_status = ENVMON_NOT_PRESENT; } else if (index + 1 < section->num_entries) env_ind->next_id = section->entry[index + 1].handle_name; else env_ind->next_id.name[0] = '\0'; } if (sensor_status == ENVMON_SENSOR_OK) { /* * user correctly identified a sensor, note its * handle value and request the indicator status */ rmc_psu->handle = section->entry[index].handle; indicator_mask = section->entry[index].ind_mask; } RELEASE_CACHE if ((sensor_status == ENVMON_SENSOR_OK) && (rmclomv_rmc_error || rmclomv_do_cmd(DP_GET_PSU_STATUS, DP_GET_PSU_STATUS_R, sizeof (dp_get_psu_status_r_t), (intptr_t)rmc_psu, (intptr_t)rmc_psu_r) != 0)) { sensor_status = ENVMON_INACCESSIBLE; } if ((env_ind->sensor_status = sensor_status) == ENVMON_SENSOR_OK) { /* * copy results into buffer for user */ if ((rmc_psu_r->psu_status[0].flag & DP_PSU_PRESENCE) == 0) env_ind->sensor_status |= ENVMON_NOT_PRESENT; if (rmc_psu_r->psu_status[0].sensor_status != DP_SENSOR_DATA_AVAILABLE) env_ind->sensor_status |= ENVMON_INACCESSIBLE; env_ind->condition = (rmc_psu_r->psu_status[0].flag & indicator_mask) == 0 ? 0 : 1; } if (rmclomv_rmc_error != RMCLOMV_RMCERROR_NONE) env_ind->sensor_status = ENVMON_INACCESSIBLE; if (ddi_copyout((caddr_t)env_ind, (caddr_t)arg, sizeof (envmon_indicator_t), mode) != 0) return (EFAULT); return (0); } /*ARGSUSED*/ static int rmclomv_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, cred_t *cred_p, int *rval_p) { int instance = getminor(dev); envmon_sysinfo_t lomv_sysinfo; union { envmon_sensor_t u_env_sensor; envmon_indicator_t u_env_ind; envmon_fan_t u_env_fan; envmon_led_info_t u_env_ledinfo; envmon_led_ctl_t u_env_ledctl; envmon_hpu_t u_env_hpu; envmon_alarm_info_t u_env_alarminfo; envmon_alarm_ctl_t u_env_alarmctl; } env_buf; #define env_sensor env_buf.u_env_sensor #define env_ind env_buf.u_env_ind #define env_fan env_buf.u_env_fan #define env_ledinfo env_buf.u_env_ledinfo #define env_ledctl env_buf.u_env_ledctl #define env_hpu env_buf.u_env_hpu #define env_alarminfo env_buf.u_env_alarminfo #define env_alarmctl env_buf.u_env_alarmctl union { dp_get_volts_t u_rmc_volts; dp_get_temperatures_t u_rmc_temp; dp_get_circuit_brks_t u_rmc_ampi; dp_get_fan_status_t u_rmc_fan; dp_get_psu_status_t u_rmc_psu; dp_get_fru_status_t u_rmc_fru; dp_get_led_state_t u_rmc_led; dp_set_led_state_t u_rmc_setled; dp_get_alarm_state_t u_rmc_alarm; dp_set_alarm_state_t u_rmc_setalarm; } rmc_reqbuf; #define rmc_volts rmc_reqbuf.u_rmc_volts #define rmc_temp rmc_reqbuf.u_rmc_temp #define rmc_ampi rmc_reqbuf.u_rmc_ampi #define rmc_fan rmc_reqbuf.u_rmc_fan #define rmc_psu rmc_reqbuf.u_rmc_psu #define rmc_fru rmc_reqbuf.u_rmc_fru #define rmc_led rmc_reqbuf.u_rmc_led #define rmc_setled rmc_reqbuf.u_rmc_setled #define rmc_alarm rmc_reqbuf.u_rmc_alarm #define rmc_setalarm rmc_reqbuf.u_rmc_setalarm union { dp_get_volts_r_t u_rmc_volts_r; dp_get_temperatures_r_t u_rmc_temp_r; dp_get_circuit_brks_r_t u_rmc_ampi_r; dp_get_fan_status_r_t u_rmc_fan_r; dp_get_psu_status_r_t u_rmc_psu_r; dp_get_fru_status_r_t u_rmc_fru_r; dp_get_led_state_r_t u_rmc_led_r; dp_set_led_state_r_t u_rmc_setled_r; dp_get_alarm_state_r_t u_rmc_alarm_r; dp_set_alarm_state_r_t u_rmc_setalarm_r; dp_get_sdp_version_r_t u_rmc_sdpversion_r; dp_get_serialnum_r_t u_rmc_serialnum_r; } rmc_resbuf; #define rmc_volts_r rmc_resbuf.u_rmc_volts_r #define rmc_temp_r rmc_resbuf.u_rmc_temp_r #define rmc_ampi_r rmc_resbuf.u_rmc_ampi_r #define rmc_fan_r rmc_resbuf.u_rmc_fan_r #define rmc_psu_r rmc_resbuf.u_rmc_psu_r #define rmc_fru_r rmc_resbuf.u_rmc_fru_r #define rmc_led_r rmc_resbuf.u_rmc_led_r #define rmc_setled_r rmc_resbuf.u_rmc_setled_r #define rmc_alarm_r rmc_resbuf.u_rmc_alarm_r #define rmc_setalarm_r rmc_resbuf.u_rmc_setalarm_r #define rmc_sdpver_r rmc_resbuf.u_rmc_sdpversion_r #define rmc_serialnum_r rmc_resbuf.u_rmc_serialnum_r int retval = 0; int special = 0; int index; uint16_t sensor_status; rmclomv_cache_section_t *section; envmon_chassis_t chassis; if (instance != 0) return (ENXIO); switch (cmd) { case ENVMONIOCSYSINFO: LOCK_CACHE /* * A number of OK/not_OK indicators are supported by PSUs * (voltage, current, fan, temperature). So the maximum * number of such indicators relates to the maximum number * of power-supplies. */ if (rmclomv_sysinfo_valid) { lomv_sysinfo.maxVoltSens = rmclomv_sysinfo_data.maxVolt; lomv_sysinfo.maxVoltInd = RMCLOMV_MAX_VI_PER_PSU * rmclomv_sysinfo_data.maxPSU; /* * the ALOM-Solaris interface does not include * amp sensors, so we can hard code this value */ lomv_sysinfo.maxAmpSens = 0; lomv_sysinfo.maxAmpInd = rmclomv_sysinfo_data.maxCircuitBrks + (RMCLOMV_MAX_CI_PER_PSU * rmclomv_sysinfo_data.maxPSU); lomv_sysinfo.maxTempSens = rmclomv_sysinfo_data.maxTemp; lomv_sysinfo.maxTempInd = (RMCLOMV_MAX_TI_PER_PSU * rmclomv_sysinfo_data.maxPSU); lomv_sysinfo.maxFanSens = rmclomv_sysinfo_data.maxFan; lomv_sysinfo.maxFanInd = RMCLOMV_MAX_FI_PER_PSU * rmclomv_sysinfo_data.maxPSU; lomv_sysinfo.maxLED = rmclomv_sysinfo_data.maxLED; lomv_sysinfo.maxHPU = RMCLOMV_NUM_SPECIAL_FRUS + rmclomv_sysinfo_data.maxFRU; } else { bzero(&lomv_sysinfo, sizeof (lomv_sysinfo)); lomv_sysinfo.maxHPU = 1; /* just the SC node */ } RELEASE_CACHE if (ddi_copyout((caddr_t)&lomv_sysinfo, (caddr_t)arg, sizeof (lomv_sysinfo), mode) != 0) return (EFAULT); break; case ENVMONIOCVOLTSENSOR: if (ddi_copyin((caddr_t)arg, (caddr_t)&env_sensor, sizeof (envmon_sensor_t), mode) != 0) return (EFAULT); /* see if we've got volts handles cached */ LOCK_CACHE sensor_status = ENVMON_SENSOR_OK; if ((rmclomv_cache_valid == B_FALSE) || ((section = rmclomv_find_section(rmclomv_cache, RMCLOMV_VOLT_SENS)) == NULL)) { env_sensor.next_id.name[0] = '\0'; sensor_status = ENVMON_NOT_PRESENT; } else if (env_sensor.id.name[0] == '\0') { /* request for first handle */ if (section->num_entries == 0) env_sensor.next_id.name[0] = '\0'; else env_sensor.next_id = section->entry[0].handle_name; sensor_status = ENVMON_NOT_PRESENT; } else { /* ensure name is properly terminated */ env_sensor.id.name[ENVMON_MAXNAMELEN - 1] = '\0'; if (get_sensor_by_name(section, env_sensor.id.name, &index) != 0) { env_sensor.next_id.name[0] = '\0'; sensor_status = ENVMON_NOT_PRESENT; } else if (index + 1 < section->num_entries) env_sensor.next_id = section->entry[index + 1].handle_name; else env_sensor.next_id.name[0] = '\0'; } if (sensor_status == ENVMON_SENSOR_OK) { /* * user correctly identified a sensor, note its * handle value and request the sensor value */ rmc_volts.handle = section->entry[index].handle; } RELEASE_CACHE if ((sensor_status == ENVMON_SENSOR_OK) && (rmclomv_rmc_error || rmclomv_do_cmd(DP_GET_VOLTS, DP_GET_VOLTS_R, sizeof (rmc_volts_r), (intptr_t)&rmc_volts, (intptr_t)&rmc_volts_r) != 0)) { sensor_status = ENVMON_INACCESSIBLE; } if ((sensor_status == ENVMON_SENSOR_OK) && (rmc_volts_r.volt_status[0].sensor_status == DP_SENSOR_NOT_PRESENT)) { sensor_status = ENVMON_NOT_PRESENT; } if ((env_sensor.sensor_status = sensor_status) == ENVMON_SENSOR_OK) { /* * copy results into buffer for user */ if (rmc_volts_r.volt_status[0].sensor_status != DP_SENSOR_DATA_AVAILABLE) env_sensor.sensor_status = ENVMON_INACCESSIBLE; env_sensor.value = rmc_volts_r.volt_status[0].reading; env_sensor.lowthresholds.warning = rmc_volts_r.volt_status[0].low_warning; env_sensor.lowthresholds.shutdown = rmc_volts_r.volt_status[0].low_soft_shutdown; env_sensor.lowthresholds.poweroff = rmc_volts_r.volt_status[0].low_hard_shutdown; env_sensor.highthresholds.warning = rmc_volts_r.volt_status[0].high_warning; env_sensor.highthresholds.shutdown = rmc_volts_r.volt_status[0].high_soft_shutdown; env_sensor.highthresholds.poweroff = rmc_volts_r.volt_status[0].high_hard_shutdown; } if (env_sensor.sensor_status != ENVMON_SENSOR_OK || rmclomv_rmc_error != RMCLOMV_RMCERROR_NONE) set_val_unav(&env_sensor); if (ddi_copyout((caddr_t)&env_sensor, (caddr_t)arg, sizeof (envmon_sensor_t), mode) != 0) return (EFAULT); break; case ENVMONIOCVOLTIND: return (do_psu_cmd(arg, mode, &env_ind, &rmc_psu, &rmc_psu_r, RMCLOMV_VOLT_IND)); case ENVMONIOCTEMPIND: return (do_psu_cmd(arg, mode, &env_ind, &rmc_psu, &rmc_psu_r, RMCLOMV_TEMP_IND)); case ENVMONIOCFANIND: return (do_psu_cmd(arg, mode, &env_ind, &rmc_psu, &rmc_psu_r, RMCLOMV_FAN_IND)); case ENVMONIOCAMPSENSOR: if (ddi_copyin((caddr_t)arg, (caddr_t)&env_sensor, sizeof (envmon_sensor_t), mode) != 0) return (EFAULT); env_sensor.sensor_status = ENVMON_NOT_PRESENT; env_sensor.next_id.name[0] = '\0'; if (ddi_copyout((caddr_t)&env_sensor, (caddr_t)arg, sizeof (envmon_sensor_t), mode) != 0) return (EFAULT); break; case ENVMONIOCTEMPSENSOR: if (ddi_copyin((caddr_t)arg, (caddr_t)&env_sensor, sizeof (envmon_sensor_t), mode) != 0) return (EFAULT); /* see if we've got temperature handles cached */ LOCK_CACHE sensor_status = ENVMON_SENSOR_OK; if ((rmclomv_cache_valid == B_FALSE) || ((section = rmclomv_find_section(rmclomv_cache, RMCLOMV_TEMP_SENS)) == NULL)) { env_sensor.next_id.name[0] = '\0'; sensor_status = ENVMON_NOT_PRESENT; } else if (env_sensor.id.name[0] == '\0') { /* request for first handle */ if (section->num_entries == 0) env_sensor.next_id.name[0] = '\0'; else env_sensor.next_id = section->entry[0].handle_name; sensor_status = ENVMON_NOT_PRESENT; } else { /* ensure name is properly terminated */ env_sensor.id.name[ENVMON_MAXNAMELEN - 1] = '\0'; if (get_sensor_by_name(section, env_sensor.id.name, &index) != 0) { env_sensor.next_id.name[0] = '\0'; sensor_status = ENVMON_NOT_PRESENT; } else if (index + 1 < section->num_entries) env_sensor.next_id = section->entry[index + 1].handle_name; else env_sensor.next_id.name[0] = '\0'; } if (sensor_status == ENVMON_SENSOR_OK) { /* * user correctly identified a sensor, note its * handle value and request the sensor value */ rmc_temp.handle = section->entry[index].handle; } RELEASE_CACHE if ((sensor_status == ENVMON_SENSOR_OK) && (rmclomv_rmc_error || rmclomv_do_cmd(DP_GET_TEMPERATURES, DP_GET_TEMPERATURES_R, sizeof (rmc_temp_r), (intptr_t)&rmc_temp, (intptr_t)&rmc_temp_r) != 0)) { sensor_status = ENVMON_INACCESSIBLE; } if ((sensor_status == ENVMON_SENSOR_OK) && (rmc_temp_r.temp_status[0].sensor_status == DP_SENSOR_NOT_PRESENT)) { sensor_status = ENVMON_NOT_PRESENT; } if ((env_sensor.sensor_status = sensor_status) == ENVMON_SENSOR_OK) { /* * copy results into buffer for user */ if (rmc_temp_r.temp_status[0].sensor_status != DP_SENSOR_DATA_AVAILABLE) env_sensor.sensor_status = ENVMON_INACCESSIBLE; env_sensor.value = rmc_temp_r.temp_status[0].value; env_sensor.lowthresholds.warning = rmc_temp_r.temp_status[0].low_warning; env_sensor.lowthresholds.shutdown = rmc_temp_r.temp_status[0].low_soft_shutdown; env_sensor.lowthresholds.poweroff = rmc_temp_r.temp_status[0].low_hard_shutdown; env_sensor.highthresholds.warning = rmc_temp_r.temp_status[0].high_warning; env_sensor.highthresholds.shutdown = rmc_temp_r.temp_status[0].high_soft_shutdown; env_sensor.highthresholds.poweroff = rmc_temp_r.temp_status[0].high_hard_shutdown; } if (env_sensor.sensor_status != ENVMON_SENSOR_OK || rmclomv_rmc_error != RMCLOMV_RMCERROR_NONE) set_val_unav(&env_sensor); if (ddi_copyout((caddr_t)&env_sensor, (caddr_t)arg, sizeof (envmon_sensor_t), mode) != 0) return (EFAULT); break; case ENVMONIOCFAN: if (ddi_copyin((caddr_t)arg, (caddr_t)&env_fan, sizeof (envmon_fan_t), mode) != 0) return (EFAULT); /* see if we've got fan handles cached */ LOCK_CACHE sensor_status = ENVMON_SENSOR_OK; if ((rmclomv_cache_valid == B_FALSE) || ((section = rmclomv_find_section(rmclomv_cache, RMCLOMV_FAN_SENS)) == NULL)) { env_fan.next_id.name[0] = '\0'; sensor_status = ENVMON_NOT_PRESENT; } else if (env_fan.id.name[0] == '\0') { /* request for first handle */ if (section->num_entries == 0) env_fan.next_id.name[0] = '\0'; else env_fan.next_id = section->entry[0].handle_name; sensor_status = ENVMON_NOT_PRESENT; } else { /* ensure name is properly terminated */ env_fan.id.name[ENVMON_MAXNAMELEN - 1] = '\0'; if (get_sensor_by_name(section, env_fan.id.name, &index) != 0) { env_fan.next_id.name[0] = '\0'; sensor_status = ENVMON_NOT_PRESENT; } else if (index + 1 < section->num_entries) env_fan.next_id = section->entry[index + 1].handle_name; else env_fan.next_id.name[0] = '\0'; } if (sensor_status == ENVMON_SENSOR_OK) { /* * user correctly identified a sensor, note its * handle value and request the sensor value */ rmc_fan.handle = section->entry[index].handle; } RELEASE_CACHE if ((sensor_status == ENVMON_SENSOR_OK) && (rmclomv_rmc_error || rmclomv_do_cmd(DP_GET_FAN_STATUS, DP_GET_FAN_STATUS_R, sizeof (rmc_fan_r), (intptr_t)&rmc_fan, (intptr_t)&rmc_fan_r) != 0)) { sensor_status = ENVMON_INACCESSIBLE; } if ((sensor_status == ENVMON_SENSOR_OK) && (rmc_fan_r.fan_status[0].sensor_status == DP_SENSOR_NOT_PRESENT)) { sensor_status = ENVMON_NOT_PRESENT; } if ((env_fan.sensor_status = sensor_status) == ENVMON_SENSOR_OK) { if ((rmc_fan_r.fan_status[0].flag & DP_FAN_PRESENCE) == 0) env_fan.sensor_status = ENVMON_NOT_PRESENT; if (rmc_fan_r.fan_status[0].sensor_status != DP_SENSOR_DATA_AVAILABLE) env_fan.sensor_status |= ENVMON_INACCESSIBLE; if (env_fan.sensor_status == ENVMON_SENSOR_OK) { /* * copy results into buffer for user */ env_fan.speed = rmc_fan_r.fan_status[0].speed; env_fan.lowthresholds.warning = rmc_fan_r.fan_status[0].minspeed; env_fan.lowthresholds.shutdown = ENVMON_VAL_UNAVAILABLE; env_fan.lowthresholds.poweroff = ENVMON_VAL_UNAVAILABLE; if ((rmc_fan_r.fan_status[0].flag & DP_FAN_SPEED_VAL_UNIT) == 0) bcopy(str_rpm, env_fan.units, sizeof (str_rpm)); else bcopy(str_percent, env_fan.units, sizeof (str_percent)); } } if (env_fan.sensor_status != ENVMON_SENSOR_OK || rmclomv_rmc_error != RMCLOMV_RMCERROR_NONE) set_fan_unav(&env_fan); if (ddi_copyout((caddr_t)&env_fan, (caddr_t)arg, sizeof (envmon_fan_t), mode) != 0) return (EFAULT); break; case ENVMONIOCAMPIND: if (ddi_copyin((caddr_t)arg, (caddr_t)&env_ind, sizeof (envmon_indicator_t), mode) != 0) return (EFAULT); /* see if we've got amp indicator handles cached */ LOCK_CACHE sensor_status = ENVMON_SENSOR_OK; if ((rmclomv_cache_valid == B_FALSE) || ((section = rmclomv_find_section(rmclomv_cache, RMCLOMV_AMP_IND)) == NULL)) { RELEASE_CACHE return (do_psu_cmd(arg, mode, &env_ind, &rmc_psu, &rmc_psu_r, RMCLOMV_AMP_IND)); } else if (env_ind.id.name[0] == '\0') { /* request for first handle */ if (section->num_entries == 0) { RELEASE_CACHE return (do_psu_cmd(arg, mode, &env_ind, &rmc_psu, &rmc_psu_r, RMCLOMV_AMP_IND)); } env_ind.next_id = section->entry[0].handle_name; sensor_status = ENVMON_NOT_PRESENT; } else { /* ensure name is properly terminated */ env_ind.id.name[ENVMON_MAXNAMELEN - 1] = '\0'; if (get_sensor_by_name(section, env_ind.id.name, &index) != 0) { RELEASE_CACHE return (do_psu_cmd(arg, mode, &env_ind, &rmc_psu, &rmc_psu_r, RMCLOMV_AMP_IND)); } if (index + 1 < section->num_entries) { env_ind.next_id = section->entry[index + 1].handle_name; } else { rmclomv_cache_section_t *sub_section = rmclomv_find_section(rmclomv_subcache, RMCLOMV_AMP_IND); if ((sub_section == NULL) || (sub_section->num_entries == 0)) env_ind.next_id.name[0] = '\0'; else env_ind.next_id = sub_section->entry[0].handle_name; } } if (sensor_status == ENVMON_SENSOR_OK) { /* * user correctly identified an indicator, note its * handle value and request the indicator status */ rmc_ampi.handle = section->entry[index].handle; } RELEASE_CACHE if ((sensor_status == ENVMON_SENSOR_OK) && (rmclomv_rmc_error || rmclomv_do_cmd(DP_GET_CIRCUIT_BRKS, DP_GET_CIRCUIT_BRKS_R, sizeof (rmc_ampi_r), (intptr_t)&rmc_ampi, (intptr_t)&rmc_ampi_r) != 0)) { sensor_status = ENVMON_INACCESSIBLE; } if ((sensor_status == ENVMON_SENSOR_OK) && (rmc_ampi_r.circuit_brk_status[0].sensor_status == DP_SENSOR_NOT_PRESENT)) { sensor_status = ENVMON_NOT_PRESENT; } if ((env_ind.sensor_status = sensor_status) == ENVMON_SENSOR_OK) { /* * copy results into buffer for user */ if (rmc_ampi_r.circuit_brk_status[0].sensor_status != DP_SENSOR_DATA_AVAILABLE) env_ind.sensor_status = ENVMON_INACCESSIBLE; env_ind.condition = rmc_ampi_r.circuit_brk_status[0].status; } /* * If rmclomv_rmc_error is set there is no way * that we read information from RSC. Just copy * out an inaccessible evironmental. */ if (rmclomv_rmc_error != RMCLOMV_RMCERROR_NONE) { env_ind.sensor_status = ENVMON_INACCESSIBLE; env_ind.condition = ENVMON_INACCESSIBLE; } if (ddi_copyout((caddr_t)&env_ind, (caddr_t)arg, sizeof (envmon_indicator_t), mode) != 0) return (EFAULT); break; case ENVMONIOCHPU: if (ddi_copyin((caddr_t)arg, (caddr_t)&env_hpu, sizeof (envmon_hpu_t), mode) != 0) return (EFAULT); /* see if we've got hpu handles cached */ LOCK_CACHE if ((rmclomv_cache_valid == B_FALSE) || ((section = rmclomv_find_section(rmclomv_cache, RMCLOMV_HPU_IND)) == NULL)) { RELEASE_CACHE return (EAGAIN); } /* * At this point the cache is locked and section points to * the section relating to hpus. */ sensor_status = ENVMON_SENSOR_OK; if (env_hpu.id.name[0] == '\0') { /* request for first handle */ if (section->num_entries == 0) env_hpu.next_id.name[0] = '\0'; else env_hpu.next_id = section->entry[0].handle_name; sensor_status = ENVMON_NOT_PRESENT; } else { /* ensure name is properly terminated */ env_hpu.id.name[ENVMON_MAXNAMELEN - 1] = '\0'; if (get_sensor_by_name(section, env_hpu.id.name, &index) != 0) { env_hpu.next_id.name[0] = '\0'; sensor_status = ENVMON_NOT_PRESENT; } else if (index + 1 < section->num_entries) env_hpu.next_id = section->entry[index + 1].handle_name; else env_hpu.next_id.name[0] = '\0'; } if (sensor_status == ENVMON_SENSOR_OK) { /* * user correctly identified an hpu, note its * handle value and request the hpu status */ rmc_fru.handle = section->entry[index].handle; special = section->entry[index].ind_mask; } RELEASE_CACHE if ((env_hpu.sensor_status = sensor_status) == ENVMON_SENSOR_OK) { env_hpu.fru_status = ENVMON_FRU_PRESENT; if (special != 0) { /* this is the pseudo SC node */ mutex_enter(&rmclomv_state_lock); switch (rmclomv_rmc_state) { case RMCLOMV_RMCSTATE_OK: break; case RMCLOMV_RMCSTATE_FAILED: env_hpu.fru_status = ENVMON_FRU_FAULT; break; case RMCLOMV_RMCSTATE_DOWNLOAD: env_hpu.fru_status = ENVMON_FRU_DOWNLOAD; break; default: env_hpu.sensor_status = ENVMON_INACCESSIBLE; break; } mutex_exit(&rmclomv_state_lock); } else if (rmclomv_rmc_error || rmclomv_do_cmd(DP_GET_FRU_STATUS, DP_GET_FRU_STATUS_R, sizeof (rmc_fru_r), (intptr_t)&rmc_fru, (intptr_t)&rmc_fru_r) != 0) { env_hpu.sensor_status = ENVMON_INACCESSIBLE; } else { /* * copy results into buffer for user */ if (rmc_fru_r.fru_status[0].presence == 0) { env_hpu.sensor_status = ENVMON_NOT_PRESENT; env_hpu.fru_status = ENVMON_FRU_NOT_PRESENT; } else if (rmc_fru_r.fru_status[0].sensor_status != DP_SENSOR_DATA_AVAILABLE) { env_hpu.sensor_status = ENVMON_INACCESSIBLE; } else { uint8_t status = rmc_fru_r.fru_status[0].status; if (status == DP_FRU_STATUS_UNKNOWN) { env_hpu.sensor_status = ENVMON_INACCESSIBLE; } else if (status != DP_FRU_STATUS_OK) { env_hpu.fru_status = ENVMON_FRU_FAULT; } } } } /* * If rmclomv_rmc_error is set there is no way * that we read information from RSC. Just copy * out an inaccessible environmental. */ if (rmclomv_rmc_error != RMCLOMV_RMCERROR_NONE) { env_hpu.sensor_status = ENVMON_INACCESSIBLE; env_hpu.fru_status = ENVMON_INACCESSIBLE; } if (ddi_copyout((caddr_t)&env_hpu, (caddr_t)arg, sizeof (envmon_hpu_t), mode) != 0) return (EFAULT); break; case ENVMONIOCGETLED: if (ddi_copyin((caddr_t)arg, (caddr_t)&env_ledinfo, sizeof (envmon_led_info_t), mode) != 0) return (EFAULT); /* see if we've got LED handles cached */ LOCK_CACHE sensor_status = ENVMON_SENSOR_OK; if ((rmclomv_cache_valid == B_FALSE) || ((section = rmclomv_find_section(rmclomv_cache, RMCLOMV_LED_IND)) == NULL)) { env_ledinfo.next_id.name[0] = '\0'; sensor_status = ENVMON_NOT_PRESENT; } else if (env_ledinfo.id.name[0] == '\0') { /* request for first handle */ if (section->num_entries == 0) env_ledinfo.next_id.name[0] = '\0'; else env_ledinfo.next_id = section->entry[0].handle_name; sensor_status = ENVMON_NOT_PRESENT; } else { /* ensure name is properly terminated */ env_ledinfo.id.name[ENVMON_MAXNAMELEN - 1] = '\0'; if (get_sensor_by_name(section, env_ledinfo.id.name, &index) != 0) { env_ledinfo.next_id.name[0] = '\0'; sensor_status = ENVMON_NOT_PRESENT; } else if (index + 1 < section->num_entries) env_ledinfo.next_id = section->entry[index + 1].handle_name; else env_ledinfo.next_id.name[0] = '\0'; } if (sensor_status == ENVMON_SENSOR_OK) { /* * user correctly identified a LED, note its * handle value and request the LED status */ rmc_led.handle = section->entry[index].handle; } RELEASE_CACHE if ((sensor_status == ENVMON_SENSOR_OK) && (rmclomv_rmc_error || rmclomv_do_cmd(DP_GET_LED_STATE, DP_GET_LED_STATE_R, sizeof (rmc_led_r), (intptr_t)&rmc_led, (intptr_t)&rmc_led_r) != 0)) { sensor_status = ENVMON_INACCESSIBLE; } if ((sensor_status == ENVMON_SENSOR_OK) && (rmc_led_r.led_state[0].sensor_status == DP_SENSOR_NOT_PRESENT)) { sensor_status = ENVMON_NOT_PRESENT; } if ((env_ledinfo.sensor_status = sensor_status) == ENVMON_SENSOR_OK) { /* * copy results into buffer for user * start with some defaults then override */ env_ledinfo.sensor_status = ENVMON_SENSOR_OK; env_ledinfo.led_state = ENVMON_LED_OFF; env_ledinfo.led_color = ENVMON_LED_CLR_NONE; if (rmc_led_r.led_state[0].sensor_status != DP_SENSOR_DATA_AVAILABLE) env_ledinfo.sensor_status = ENVMON_INACCESSIBLE; else { dp_led_state_t ledState; ledState = rmc_led_r.led_state[0]; env_ledinfo.led_color = (int8_t)ledState.colour; switch (ledState.state) { case (rsci8)DP_LED_OFF: break; case (rsci8)DP_LED_ON: env_ledinfo.led_state = ENVMON_LED_ON; break; case (rsci8)DP_LED_BLINKING: env_ledinfo.led_state = ENVMON_LED_BLINKING; break; case (rsci8)DP_LED_FLASHING: env_ledinfo.led_state = ENVMON_LED_FLASHING; break; default: break; } } } /* * If rmclomv_rmc_error is set there is no way * that we read information from RSC. Just copy * out an inaccessible environmental. */ if (rmclomv_rmc_error != RMCLOMV_RMCERROR_NONE) { env_ledinfo.sensor_status = ENVMON_INACCESSIBLE; env_ledinfo.led_state = ENVMON_INACCESSIBLE; } if (ddi_copyout((caddr_t)&env_ledinfo, (caddr_t)arg, sizeof (envmon_led_info_t), mode) != 0) return (EFAULT); break; case ENVMONIOCSETLED: if ((mode & FWRITE) == 0) return (EACCES); if (drv_priv(cred_p) != 0) return (EPERM); if (ddi_copyin((caddr_t)arg, (caddr_t)&env_ledctl, sizeof (envmon_led_ctl_t), mode) != 0) return (EFAULT); if (env_ledctl.led_state < RMCLOMV_MIN_LED_STATE || env_ledctl.led_state > RMCLOMV_MAX_LED_STATE) return (EINVAL); /* * Ensure name is properly terminated. */ env_ledctl.id.name[ENVMON_MAXNAMELEN - 1] = '\0'; /* see if we've got LED handles cached */ LOCK_CACHE if ((rmclomv_cache_valid == B_FALSE) || ((section = rmclomv_find_section(rmclomv_cache, RMCLOMV_LED_IND)) == NULL) || (get_sensor_by_name(section, env_ledctl.id.name, &index) != 0)) { RELEASE_CACHE return (EINVAL); /* no such LED */ } /* * user correctly identified a LED, note its handle value */ rmc_setled.handle = section->entry[index].handle; RELEASE_CACHE switch (env_ledctl.led_state) { case ENVMON_LED_ON: rmc_setled.state = DP_LED_ON; break; case ENVMON_LED_BLINKING: rmc_setled.state = DP_LED_BLINKING; break; case ENVMON_LED_FLASHING: rmc_setled.state = DP_LED_FLASHING; break; default: rmc_setled.state = DP_LED_OFF; break; } retval = rmclomv_do_cmd(DP_SET_LED_STATE, DP_SET_LED_STATE_R, sizeof (rmc_setled_r), (intptr_t)&rmc_setled, (intptr_t)&rmc_setled_r); if (retval != 0) { break; } if (rmc_setled_r.status != 0) { cmn_err(CE_WARN, "ENVMONIOCSETLED: \"%s\" status: 0x%x", env_ledctl.id.name, rmc_setled_r.status); return (EIO); } break; case ENVMONIOCGETKEYSW: { enum rmc_keyswitch_pos rmc_pos = real_key_position; envmon_keysw_pos_t envmon_pos; /* * Yes, I know this is ugly, but the V210 has no keyswitch, * even though the ALOM returns a value for it */ if (strcmp(platform, "SUNW,Sun-Fire-V210") == 0) { return (ENOTSUP); } switch (rmc_pos) { case RMC_KEYSWITCH_POS_NORMAL: envmon_pos = ENVMON_KEYSW_POS_NORMAL; break; case RMC_KEYSWITCH_POS_DIAG: envmon_pos = ENVMON_KEYSW_POS_DIAG; break; case RMC_KEYSWITCH_POS_LOCKED: envmon_pos = ENVMON_KEYSW_POS_LOCKED; break; case RMC_KEYSWITCH_POS_OFF: envmon_pos = ENVMON_KEYSW_POS_OFF; break; default: envmon_pos = ENVMON_KEYSW_POS_UNKNOWN; break; } if (ddi_copyout((caddr_t)&envmon_pos, (caddr_t)arg, sizeof (envmon_pos), mode) != 0) return (EFAULT); break; } case ENVMONIOCGETALARM: if (ddi_copyin((caddr_t)arg, (caddr_t)&env_alarminfo, sizeof (envmon_alarm_info_t), mode) != 0) return (EFAULT); /* see if we've got ALARM handles cached */ LOCK_CACHE sensor_status = ENVMON_SENSOR_OK; if ((rmclomv_cache_valid == B_FALSE) || ((section = rmclomv_find_section(rmclomv_cache, RMCLOMV_ALARM_IND)) == NULL)) { env_alarminfo.next_id.name[0] = '\0'; sensor_status = ENVMON_NOT_PRESENT; } else if (env_alarminfo.id.name[0] == '\0') { /* request for first handle */ if (section->num_entries == 0) env_alarminfo.next_id.name[0] = '\0'; else env_alarminfo.next_id = section->entry[0].handle_name; sensor_status = ENVMON_NOT_PRESENT; } else { /* ensure name is properly terminated */ env_alarminfo.id.name[ENVMON_MAXNAMELEN - 1] = '\0'; if (get_sensor_by_name(section, env_alarminfo.id.name, &index) != 0) { env_alarminfo.next_id.name[0] = '\0'; sensor_status = ENVMON_NOT_PRESENT; } else if (index + 1 < section->num_entries) env_alarminfo.next_id = section->entry[index + 1].handle_name; else env_alarminfo.next_id.name[0] = '\0'; } if (sensor_status == ENVMON_SENSOR_OK) { /* * user correctly identified a ALARM, note its * handle value and request the ALARM status */ rmc_alarm.handle = section->entry[index].handle; } RELEASE_CACHE if ((sensor_status == ENVMON_SENSOR_OK) && (rmclomv_rmc_error || rmclomv_do_cmd(DP_GET_ALARM_STATE, DP_GET_ALARM_STATE_R, sizeof (rmc_alarm_r), (intptr_t)&rmc_alarm, (intptr_t)&rmc_alarm_r) != 0)) { sensor_status = ENVMON_INACCESSIBLE; } if ((env_alarminfo.sensor_status = sensor_status) == ENVMON_SENSOR_OK) { /* * copy results into buffer for user * start with some defaults then override */ env_alarminfo.sensor_status = ENVMON_SENSOR_OK; env_alarminfo.alarm_state = ENVMON_ALARM_OFF; if (rmc_alarm_r.alarm_state[0].sensor_status != DP_SENSOR_DATA_AVAILABLE) env_alarminfo.sensor_status = ENVMON_INACCESSIBLE; else { dp_alarm_state_t alarmState; alarmState = rmc_alarm_r.alarm_state[0]; switch (alarmState.state) { case DP_ALARM_OFF: break; case DP_ALARM_ON: env_alarminfo.alarm_state = ENVMON_ALARM_ON; break; default: break; } } } /* * If rmclomv_rmc_error is set there is no way * that we read information from RSC. Just copy * out an inaccessible environmental. */ if (rmclomv_rmc_error != RMCLOMV_RMCERROR_NONE) { env_alarminfo.sensor_status = ENVMON_INACCESSIBLE; env_alarminfo.alarm_state = ENVMON_INACCESSIBLE; } if (ddi_copyout((caddr_t)&env_alarminfo, (caddr_t)arg, sizeof (envmon_alarm_info_t), mode) != 0) return (EFAULT); break; case ENVMONIOCSETALARM: if ((mode & FWRITE) == 0) return (EACCES); if (drv_priv(cred_p) != 0) return (EPERM); if (ddi_copyin((caddr_t)arg, (caddr_t)&env_alarmctl, sizeof (envmon_alarm_ctl_t), mode) != 0) return (EFAULT); if (env_alarmctl.alarm_state < RMCLOMV_MIN_ALARM_STATE || env_alarmctl.alarm_state > RMCLOMV_MAX_ALARM_STATE) return (EINVAL); /* * Ensure name is properly terminated. */ env_alarmctl.id.name[ENVMON_MAXNAMELEN - 1] = '\0'; /* see if we've got ALARM handles cached */ LOCK_CACHE if ((rmclomv_cache_valid == B_FALSE) || ((section = rmclomv_find_section(rmclomv_cache, RMCLOMV_ALARM_IND)) == NULL) || (get_sensor_by_name(section, env_alarmctl.id.name, &index) != 0)) { RELEASE_CACHE return (EINVAL); /* no such ALARM */ } /* * user correctly identified a ALARM, note its handle value */ rmc_setalarm.handle = section->entry[index].handle; RELEASE_CACHE rmc_setalarm.state = (rsci8)env_alarmctl.alarm_state; retval = rmclomv_do_cmd(DP_SET_ALARM_STATE, DP_SET_ALARM_STATE_R, sizeof (rmc_setalarm_r), (intptr_t)&rmc_setalarm, (intptr_t)&rmc_setalarm_r); if (retval != 0) { break; } if (rmc_setalarm_r.status != 0) { cmn_err(CE_WARN, "ENVMONIOCSETALARM: \"%s\" status: " "0x%x", env_alarmctl.id.name, rmc_setalarm_r.status); return (EIO); } break; case ENVMONIOCCHASSISSERIALNUM: retval = rmclomv_do_cmd(DP_GET_SDP_VERSION, DP_GET_SDP_VERSION_R, sizeof (rmc_sdpver_r), NULL, (intptr_t)&rmc_sdpver_r); if (retval != 0) { cmn_err(CE_WARN, "DP_GET_SDP_VERSION failed, ret=%d\n", retval); break; } else if (rmc_sdpver_r.version < SDP_RESPONDS_TO_ALL_CMDS) { retval = ENOTSUP; break; } retval = rmclomv_do_cmd(DP_GET_CHASSIS_SERIALNUM, DP_GET_CHASSIS_SERIALNUM_R, sizeof (rmc_serialnum_r), NULL, (intptr_t)&rmc_serialnum_r); if (retval != 0) { break; } bcopy(rmc_serialnum_r.chassis_serial_number, chassis.serial_number, sizeof (rmc_serialnum_r.chassis_serial_number)); if (ddi_copyout((caddr_t)&chassis, (caddr_t)arg, sizeof (chassis), mode) != 0) { return (EFAULT); } sensor_status = ENVMON_SENSOR_OK; break; default: retval = ENOTSUP; break; } return (retval); } /* ARGSUSED */ static void rmclomv_checkrmc(caddr_t arg) { callb_cpr_t cprinfo; int err; int retries; int state; dp_get_sysinfo_r_t sysinfo; CALLB_CPR_INIT(&cprinfo, &rmclomv_checkrmc_lock, callb_generic_cpr, "rmclomv_checkrmc"); mutex_enter(&rmclomv_checkrmc_lock); for (;;) { /* * Initial entry to this for loop is made with * rmclomv_checkrmc_sig set to RMCLOMV_PROCESS_NOW. So the * following while loop drops through the first time. A * timeout call is made just before polling the RMC. Its * interrupt routine sustains this loop by injecting additional * state changes and cv events. */ /* * Wait for someone to tell me to continue. */ while (rmclomv_checkrmc_sig == RMCLOMV_CHECKRMC_WAIT) { CALLB_CPR_SAFE_BEGIN(&cprinfo); cv_wait(&rmclomv_checkrmc_sig_cv, &rmclomv_checkrmc_lock); CALLB_CPR_SAFE_END(&cprinfo, &rmclomv_checkrmc_lock); } mutex_exit(&rmclomv_checkrmc_lock); /* * mustn't hold same lock as timeout called with * when cancelling timer */ if (timer_id != 0) { (void) untimeout(timer_id); timer_id = 0; } mutex_enter(&rmclomv_checkrmc_lock); /* RMCLOMV_CHECKRMC_EXITNOW implies signal by _detach(). */ if (rmclomv_checkrmc_sig == RMCLOMV_CHECKRMC_EXITNOW) { rmclomv_checkrmc_sig = RMCLOMV_CHECKRMC_WAIT; /* rmclomv_checkrmc_lock is held at this point! */ CALLB_CPR_EXIT(&cprinfo); thread_exit(); /* NOTREACHED */ } rmclomv_checkrmc_sig = RMCLOMV_CHECKRMC_WAIT; /* * If the RMC is not responding, rmclomv_do_cmd() takes a * long time and eventually times out. We conclude that the * RMC is broken if it doesn't respond to a number of polls * made 60 secs apart. So that the rmclomv_do_cmd() time-out * period isn't added to our 60 second timer, make the * timeout() call before calling rmclomv_do_cmd(). */ if (timer_id == 0) { timer_id = timeout(rmclomv_checkrmc_wakeup, NULL, 60 * drv_usectohz(1000000)); } mutex_exit(&rmclomv_checkrmc_lock); err = rmclomv_do_cmd(DP_GET_SYSINFO, DP_GET_SYSINFO_R, sizeof (sysinfo), NULL, (intptr_t)&sysinfo); if (err == 0) { mutex_enter(&rmclomv_state_lock); state = rmclomv_rmc_state; /* successful poll, reset fail count */ rmclomv_rmcfailcount = 0; mutex_exit(&rmclomv_state_lock); if (state != RMCLOMV_RMCSTATE_OK) { rmclomv_refresh_wakeup(); } } if ((err != 0) && (rmclomv_rmc_error != RMCLOMV_RMCSTATE_DOWNLOAD)) { /* * Failed response or no response from RMC. * Count the failure. * If threshold exceeded, send a DR event. */ mutex_enter(&rmclomv_state_lock); retries = rmclomv_rmcfailcount; state = rmclomv_rmc_state; if (retries == RMCLOMV_RMCFAILTHRESHOLD) rmclomv_rmc_state = RMCLOMV_RMCSTATE_FAILED; if (rmclomv_rmcfailcount <= RMCLOMV_RMCFAILTHRESHOLD) rmclomv_rmcfailcount++; mutex_exit(&rmclomv_state_lock); if (retries == RMCLOMV_RMCFAILTHRESHOLD) { cmn_err(CE_WARN, "SC %s responding", state == RMCLOMV_RMCSTATE_OK ? "has stopped" : "is not"); refresh_name_cache(B_TRUE); rmclomv_dr_data_handler(str_sc, SE_NO_HINT); } } /* * Re-enter the lock to prepare for another iteration. * We must have the lock here to protect rmclomv_checkrmc_sig. */ mutex_enter(&rmclomv_checkrmc_lock); } } static void rmclomv_checkrmc_start(void) { kthread_t *tp; mutex_enter(&rmclomv_checkrmc_lock); if (rmclomv_checkrmc_tid == 0) { rmclomv_checkrmc_sig = RMCLOMV_CHECKRMC_PROCESSNOW; tp = thread_create(NULL, 0, rmclomv_checkrmc, NULL, 0, &p0, TS_RUN, maxclsyspri); rmclomv_checkrmc_tid = tp->t_did; } mutex_exit(&rmclomv_checkrmc_lock); } static void rmclomv_checkrmc_destroy(void) { kt_did_t tid; mutex_enter(&rmclomv_checkrmc_lock); tid = rmclomv_checkrmc_tid; if (tid != 0) { rmclomv_checkrmc_sig = RMCLOMV_CHECKRMC_EXITNOW; cv_signal(&rmclomv_checkrmc_sig_cv); rmclomv_checkrmc_tid = 0; } mutex_exit(&rmclomv_checkrmc_lock); /* * Wait for rmclomv_checkrmc() to finish */ if (tid != 0) thread_join(tid); } /*ARGSUSED*/ static void rmclomv_checkrmc_wakeup(void *arg) { mutex_enter(&rmclomv_checkrmc_lock); if (rmclomv_checkrmc_sig != RMCLOMV_CHECKRMC_EXITNOW) rmclomv_checkrmc_sig = RMCLOMV_CHECKRMC_PROCESSNOW; cv_signal(&rmclomv_checkrmc_sig_cv); mutex_exit(&rmclomv_checkrmc_lock); } /* ARGSUSED */ static void rmclomv_refresh(caddr_t arg) { void (*plat_nodename_set_fun)(void); sig_state_t *current_sgn_p; callb_cpr_t cprinfo; int state; CALLB_CPR_INIT(&cprinfo, &rmclomv_refresh_lock, callb_generic_cpr, "rmclomv_refresh"); mutex_enter(&rmclomv_refresh_lock); for (;;) { /* * Wait for someone to tell me to continue. */ while (rmclomv_refresh_sig == RMCLOMV_REFRESH_WAIT) { CALLB_CPR_SAFE_BEGIN(&cprinfo); cv_wait(&rmclomv_refresh_sig_cv, &rmclomv_refresh_lock); CALLB_CPR_SAFE_END(&cprinfo, &rmclomv_refresh_lock); } /* RMCLOMV_REFRESH_EXITNOW implies signal by _detach(). */ if (rmclomv_refresh_sig == RMCLOMV_REFRESH_EXITNOW) { rmclomv_refresh_sig = RMCLOMV_REFRESH_WAIT; /* rmclomv_refresh_lock is held at this point! */ CALLB_CPR_EXIT(&cprinfo); thread_exit(); /* NOTREACHED */ } ASSERT(rmclomv_refresh_sig == RMCLOMV_REFRESH_PROCESSNOW); rmclomv_refresh_sig = RMCLOMV_REFRESH_WAIT; mutex_exit(&rmclomv_refresh_lock); refresh_name_cache(B_FALSE); /* * We're not going to access rmclomv_sysinfo_data here, * so there's no point in locking it before reading * rmclomv_sysinfo_valid. Also this avoids holding two * locks at once and the concommitant worry about deadlocks. */ if (rmclomv_sysinfo_valid) { /* * We've just successfully read the RMC sysinfo * so the RMC must be operational. Update its * state and if it was previously not OK, refresh * nodename, CPU signatures and watchdog settings. */ mutex_enter(&rmclomv_state_lock); rmclomv_rmcfailcount = 0; state = rmclomv_rmc_state; rmclomv_rmc_state = RMCLOMV_RMCSTATE_OK; mutex_exit(&rmclomv_state_lock); if (state != RMCLOMV_RMCSTATE_OK) { rmclomv_dr_data_handler(str_sc, SE_NO_HINT); if (state == RMCLOMV_RMCSTATE_FAILED) { cmn_err(CE_NOTE, "SC recovered"); } } if (utsname.nodename[0] != 0) { plat_nodename_set_fun = (void (*)(void))modgetsymvalue( "plat_nodename_set", 0); if (plat_nodename_set_fun != NULL) plat_nodename_set_fun(); } current_sgn_p = (sig_state_t *)modgetsymvalue( "current_sgn", 0); if ((current_sgn_p != NULL) && (current_sgn_p->state_t.sig != 0)) { CPU_SIGNATURE(current_sgn_p->state_t.sig, current_sgn_p->state_t.state, current_sgn_p->state_t.sub_state, -1); if (!(boothowto & RB_DEBUG)) { send_watchdog_msg(last_watchdog_msg); } } } /* * update keyswitch value in case it changed while the * RMC was out of action */ LOCK_CACHE if (rmclomv_sysinfo_valid) { real_key_position = rmclomv_sysinfo_data.keyswitch; if ((real_key_position != RMC_KEYSWITCH_POS_UNKNOWN) && (real_key_position <= RMC_KEYSWITCH_POS_OFF)) { key_position = real_key_position; } else { /* treat unknown key position as locked */ key_position = RMC_KEYSWITCH_POS_LOCKED; } } else { /* treat unreadable key position as locked */ key_position = RMC_KEYSWITCH_POS_LOCKED; real_key_position = RMC_KEYSWITCH_POS_UNKNOWN; } RELEASE_CACHE /* * Re-enter the lock to prepare for another iteration. * We must have the lock here to protect rmclomv_refresh_sig. */ mutex_enter(&rmclomv_refresh_lock); } } static void rmclomv_refresh_start(void) { kthread_t *tp; mutex_enter(&rmclomv_refresh_lock); if (rmclomv_refresh_tid == 0) { rmclomv_refresh_sig = RMCLOMV_REFRESH_PROCESSNOW; tp = thread_create(NULL, 0, rmclomv_refresh, NULL, 0, &p0, TS_RUN, maxclsyspri); rmclomv_refresh_tid = tp->t_did; } mutex_exit(&rmclomv_refresh_lock); } static void rmclomv_refresh_destroy(void) { kt_did_t tid; mutex_enter(&rmclomv_refresh_lock); tid = rmclomv_refresh_tid; if (tid != 0) { rmclomv_refresh_sig = RMCLOMV_REFRESH_EXITNOW; cv_signal(&rmclomv_refresh_sig_cv); rmclomv_refresh_tid = 0; } mutex_exit(&rmclomv_refresh_lock); /* * Wait for rmclomv_refresh() to finish */ if (tid != 0) thread_join(tid); } static void rmclomv_refresh_wakeup(void) { mutex_enter(&rmclomv_refresh_lock); if (rmclomv_refresh_sig != RMCLOMV_REFRESH_EXITNOW) rmclomv_refresh_sig = RMCLOMV_REFRESH_PROCESSNOW; cv_signal(&rmclomv_refresh_sig_cv); mutex_exit(&rmclomv_refresh_lock); } static void send_watchdog_msg(int msg) { rmc_comm_msg_t request; dp_set_host_watchdog_t watchdog_msg; if (rmclomv_watchdog_mode) return; watchdog_msg.enable = msg; request.msg_type = DP_SET_HOST_WATCHDOG; request.msg_len = sizeof (watchdog_msg); request.msg_buf = (caddr_t)&watchdog_msg; (void) rmc_comm_request_nowait(&request, (msg == 1) ? RMC_COMM_DREQ_URGENT : 0); } /*ARGSUSED*/ static uint_t rmc_set_watchdog_timer(uint_t timeoutval) { ASSERT(MUTEX_HELD(&tod_lock)); if ((watchdog_enable == 0) || (watchdog_available == 0)) { return (0); } /* * If boothowto has RB_DEBUG set we never want to set the watchdog * support on. */ if (boothowto & RB_DEBUG) { return (0); } /* * When the watchdog is shut off last_watchdog_msg goes from a * 0 to a 1. So we must test to see that last_watchdog_msg is * set to 1 indicating that watchdog was shut off and * After which we set last_watchdog_msg back to 0 so that we do not * run this code * again. */ if (last_watchdog_msg == 1) { send_watchdog_msg(0); last_watchdog_msg = 0; } pmugpio_watchdog_pat(); watchdog_activated = 1; return (1); } static uint_t rmc_clear_watchdog_timer(void) { ASSERT(MUTEX_HELD(&tod_lock)); if ((watchdog_activated == 0) || (boothowto & RB_DEBUG)) return (0); send_watchdog_msg(1); last_watchdog_msg = 1; watchdog_activated = 0; return (0); } static void plat_timesync(void *arg) { timestruc_t now; todinfo_t tod; rmc_comm_msg_t request; dp_set_date_time_t set_time_msg; int retval; timestruc_t ts; dp_get_date_time_r_t *date_and_time_info; int buffer[DATE_TIME_MSG_SIZE]; /* Is the system coming up? */ if (arg != NULL) { /* Request the time from the RMC clock. */ retval = rmclomv_do_cmd(DP_GET_DATE_TIME, DP_GET_DATE_TIME_R, DATE_TIME_MSG_SIZE, NULL, (intptr_t)&buffer); /* * If we were able to get the time lets set the local clock. * The time returned from RMC is in Unix time format. * * If we couldn't get the time we'll accept the drift so as not * to cause congestion on the I2C bus or cause boot * performance regressions. */ if (retval == RCNOERR) { date_and_time_info = (dp_get_date_time_r_t *)buffer; ts.tv_sec = date_and_time_info->current_datetime; ts.tv_nsec = 0; mutex_enter(&tod_lock); tod_set(ts); set_hrestime(&ts); mutex_exit(&tod_lock); } } gethrestime(&now); mutex_enter(&tod_lock); tod = utc_to_tod(now.tv_sec); mutex_exit(&tod_lock); set_time_msg.year = tod.tod_year; set_time_msg.month = tod.tod_month - 1; set_time_msg.day = tod.tod_day; set_time_msg.hour = tod.tod_hour; set_time_msg.minute = tod.tod_min; set_time_msg.second = tod.tod_sec; request.msg_type = DP_SET_DATE_TIME; request.msg_len = sizeof (set_time_msg); request.msg_buf = (caddr_t)&set_time_msg; (void) rmc_comm_request_nowait(&request, 0); (void) timeout(plat_timesync, NULL, timesync_interval); } /* * Interfaces to get/set alarm relays from outside */ int rmclomv_alarm_get(int alarm_type, int *alarm_state) { rmclomv_cache_section_t *section; int index; uint16_t sensor_status; dp_get_alarm_state_t u_rmc_alarm; dp_get_alarm_state_r_t u_rmc_alarm_r; /* see if we've got ALARM handles cached */ LOCK_CACHE sensor_status = ENVMON_SENSOR_OK; if ((rmclomv_cache_valid == B_FALSE) || ((section = rmclomv_find_section(rmclomv_cache, RMCLOMV_ALARM_IND)) == NULL)) { sensor_status = ENVMON_NOT_PRESENT; } if (sensor_status == ENVMON_SENSOR_OK) { /* * user correctly identified a ALARM, note its * handle value and request the ALARM status */ index = alarm_type; if (index >= section->num_entries) sensor_status = ENVMON_INACCESSIBLE; else u_rmc_alarm.handle = section->entry[index].handle; } RELEASE_CACHE if ((sensor_status == ENVMON_SENSOR_OK) && (rmclomv_rmc_error || rmclomv_do_cmd(DP_GET_ALARM_STATE, DP_GET_ALARM_STATE_R, sizeof (u_rmc_alarm_r), (intptr_t)&u_rmc_alarm, (intptr_t)&u_rmc_alarm_r) != 0)) { sensor_status = ENVMON_INACCESSIBLE; } if (sensor_status == ENVMON_SENSOR_OK) { /* * copy results into buffer for user * start with some defaults then override */ *alarm_state = 0; if (u_rmc_alarm_r.alarm_state[0].sensor_status != DP_SENSOR_DATA_AVAILABLE) return (ENXIO); else { dp_alarm_state_t alarmState; alarmState = u_rmc_alarm_r.alarm_state[0]; switch (alarmState.state) { case DP_ALARM_OFF: break; case DP_ALARM_ON: *alarm_state = 1; break; default: break; } } } else return (ENXIO); return (0); } int rmclomv_alarm_set(int alarm_type, int new_state) { rmclomv_cache_section_t *section; int index; uint16_t sensor_status; dp_set_alarm_state_t u_rmc_setalarm; dp_set_alarm_state_r_t u_rmc_setalarm_r; /* see if we've got ALARM handles cached */ LOCK_CACHE sensor_status = ENVMON_SENSOR_OK; if ((rmclomv_cache_valid == B_FALSE) || ((section = rmclomv_find_section(rmclomv_cache, RMCLOMV_ALARM_IND)) == NULL)) { sensor_status = ENVMON_NOT_PRESENT; } if (sensor_status == ENVMON_SENSOR_OK) { /* * user correctly identified a ALARM, note its * handle value and request the ALARM status */ index = alarm_type; if (index >= section->num_entries) sensor_status = ENVMON_INACCESSIBLE; else { u_rmc_setalarm.handle = section->entry[index].handle; u_rmc_setalarm.state = new_state; } } RELEASE_CACHE if ((sensor_status == ENVMON_SENSOR_OK) && (rmclomv_rmc_error || rmclomv_do_cmd(DP_SET_ALARM_STATE, DP_SET_ALARM_STATE_R, sizeof (u_rmc_setalarm_r), (intptr_t)&u_rmc_setalarm, (intptr_t)&u_rmc_setalarm_r) != 0)) { sensor_status = ENVMON_INACCESSIBLE; } if (u_rmc_setalarm_r.status != DP_SET_ALARM_OK) { return (EIO); } if (sensor_status != ENVMON_SENSOR_OK) { return (ENXIO); } return (0); }