/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, Version 1.0 only * (the "License"). You may not use this file except in compliance * with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2005 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" /* * PCI nexus interrupt handling: * PCI device interrupt handler wrapper * pil lookup routine * PCI device interrupt related initchild code */ #include #include #include #include #include #include /* e_ddi_nodeid_to_dip() */ #include #include #include #include #ifdef _STARFIRE #include #endif /* _STARFIRE */ /* * interrupt jabber: * * When an interrupt line is jabbering, every time the state machine for the * associated ino is idled, a new mondo will be sent and the ino will go into * the pending state again. The mondo will cause a new call to * pci_intr_wrapper() which normally idles the ino's state machine which would * precipitate another trip round the loop. * The loop can be broken by preventing the ino's state machine from being * idled when an interrupt line is jabbering. See the comment at the * beginning of pci_intr_wrapper() explaining how the 'interrupt jabber * protection' code does this. */ /*LINTLIBRARY*/ #ifdef NOT_DEFINED /* * This array is used to determine the sparc PIL at the which the * handler for a given INO will execute. This table is for onboard * devices only. A different scheme will be used for plug-in cards. */ uint_t ino_to_pil[] = { /* pil */ /* ino */ 0, 0, 0, 0, /* 0x00 - 0x03: bus A slot 0 int#A, B, C, D */ 0, 0, 0, 0, /* 0x04 - 0x07: bus A slot 1 int#A, B, C, D */ 0, 0, 0, 0, /* 0x08 - 0x0B: unused */ 0, 0, 0, 0, /* 0x0C - 0x0F: unused */ 0, 0, 0, 0, /* 0x10 - 0x13: bus B slot 0 int#A, B, C, D */ 0, 0, 0, 0, /* 0x14 - 0x17: bus B slot 1 int#A, B, C, D */ 0, 0, 0, 0, /* 0x18 - 0x1B: bus B slot 2 int#A, B, C, D */ 4, 0, 0, 0, /* 0x1C - 0x1F: bus B slot 3 int#A, B, C, D */ 4, /* 0x20: SCSI */ 6, /* 0x21: ethernet */ 3, /* 0x22: parallel port */ 9, /* 0x23: audio record */ 9, /* 0x24: audio playback */ 14, /* 0x25: power fail */ 4, /* 0x26: 2nd SCSI */ 8, /* 0x27: floppy */ 14, /* 0x28: thermal warning */ 12, /* 0x29: keyboard */ 12, /* 0x2A: mouse */ 12, /* 0x2B: serial */ 0, /* 0x2C: timer/counter 0 */ 0, /* 0x2D: timer/counter 1 */ 14, /* 0x2E: uncorrectable ECC errors */ 14, /* 0x2F: correctable ECC errors */ 14, /* 0x30: PCI bus A error */ 14, /* 0x31: PCI bus B error */ 14, /* 0x32: power management wakeup */ 14, /* 0x33 */ 14, /* 0x34 */ 14, /* 0x35 */ 14, /* 0x36 */ 14, /* 0x37 */ 14, /* 0x38 */ 14, /* 0x39 */ 14, /* 0x3a */ 14, /* 0x3b */ 14, /* 0x3c */ 14, /* 0x3d */ 14, /* 0x3e */ 14, /* 0x3f */ 14 /* 0x40 */ }; #endif /* NOT_DEFINED */ #define PCI_SIMBA_VENID 0x108e /* vendor id for simba */ #define PCI_SIMBA_DEVID 0x5000 /* device id for simba */ /* * map_pcidev_cfg_reg - create mapping to pci device configuration registers * if we have a simba AND a pci to pci bridge along the * device path. * Called with corresponding mutexes held!! * * XXX XXX XXX The purpose of this routine is to overcome a hardware * defect in Sabre CPU and Simba bridge configuration * which does not drain DMA write data stalled in * PCI to PCI bridges (such as the DEC bridge) beyond * Simba. This routine will setup the data structures * to allow the pci_intr_wrapper to perform a manual * drain data operation before passing the control to * interrupt handlers of device drivers. * return value: * DDI_SUCCESS * DDI_FAILURE if unable to create mapping */ static int map_pcidev_cfg_reg(dev_info_t *dip, dev_info_t *rdip, ddi_acc_handle_t *hdl_p) { dev_info_t *cdip; dev_info_t *pci_dip = NULL; pci_t *pci_p = get_pci_soft_state(ddi_get_instance(dip)); int simba_found = 0, pci_bridge_found = 0; for (cdip = rdip; cdip && cdip != dip; cdip = ddi_get_parent(cdip)) { ddi_acc_handle_t config_handle; uint32_t vendor_id = ddi_getprop(DDI_DEV_T_ANY, cdip, DDI_PROP_DONTPASS, "vendor-id", 0xffff); DEBUG4(DBG_A_INTX, pci_p->pci_dip, "map dev cfg reg for %s%d: @%s%d\n", ddi_driver_name(rdip), ddi_get_instance(rdip), ddi_driver_name(cdip), ddi_get_instance(cdip)); if (ddi_prop_exists(DDI_DEV_T_ANY, cdip, DDI_PROP_DONTPASS, "no-dma-interrupt-sync")) continue; /* continue to search up-stream if not a PCI device */ if (vendor_id == 0xffff) continue; /* record the deepest pci device */ if (!pci_dip) pci_dip = cdip; /* look for simba */ if (vendor_id == PCI_SIMBA_VENID) { uint32_t device_id = ddi_getprop(DDI_DEV_T_ANY, cdip, DDI_PROP_DONTPASS, "device-id", -1); if (device_id == PCI_SIMBA_DEVID) { simba_found = 1; DEBUG0(DBG_A_INTX, pci_p->pci_dip, "\tFound simba\n"); continue; /* do not check bridge if simba */ } } /* look for pci to pci bridge */ if (pci_config_setup(cdip, &config_handle) != DDI_SUCCESS) { cmn_err(CE_WARN, "%s%d: can't get brdg cfg space for %s%d\n", ddi_driver_name(dip), ddi_get_instance(dip), ddi_driver_name(cdip), ddi_get_instance(cdip)); return (DDI_FAILURE); } if (pci_config_get8(config_handle, PCI_CONF_BASCLASS) == PCI_CLASS_BRIDGE) { DEBUG0(DBG_A_INTX, pci_p->pci_dip, "\tFound PCI to xBus bridge\n"); pci_bridge_found = 1; } pci_config_teardown(&config_handle); } if (!pci_bridge_found) return (DDI_SUCCESS); if (!simba_found && (CHIP_TYPE(pci_p) < PCI_CHIP_SCHIZO)) return (DDI_SUCCESS); if (pci_config_setup(pci_dip, hdl_p) != DDI_SUCCESS) { cmn_err(CE_WARN, "%s%d: can not get config space for %s%d\n", ddi_driver_name(dip), ddi_get_instance(dip), ddi_driver_name(cdip), ddi_get_instance(cdip)); return (DDI_FAILURE); } return (DDI_SUCCESS); } /* * If the unclaimed interrupt count has reached the limit set by * pci_unclaimed_intr_max within the time limit, then all interrupts * on this ino is blocked by not idling the interrupt state machine. */ static int pci_spurintr(ib_ino_info_t *ino_p) { int i; ih_t *ih_p = ino_p->ino_ih_start; pci_t *pci_p = ino_p->ino_ib_p->ib_pci_p; char *err_fmt_str; if (ino_p->ino_unclaimed > pci_unclaimed_intr_max) return (DDI_INTR_CLAIMED); if (!ino_p->ino_unclaimed) ino_p->ino_spurintr_begin = ddi_get_lbolt(); ino_p->ino_unclaimed++; if (ino_p->ino_unclaimed <= pci_unclaimed_intr_max) goto clear; if (drv_hztousec(ddi_get_lbolt() - ino_p->ino_spurintr_begin) > pci_spurintr_duration) { ino_p->ino_unclaimed = 0; goto clear; } err_fmt_str = "%s%d: ino 0x%x blocked"; goto warn; clear: IB_INO_INTR_CLEAR(ino_p->ino_clr_reg); /* clear the pending state */ if (!pci_spurintr_msgs) /* tomatillo errata #71 spurious mondo */ return (DDI_INTR_CLAIMED); err_fmt_str = "!%s%d: spurious interrupt from ino 0x%x"; warn: cmn_err(CE_WARN, err_fmt_str, NAMEINST(pci_p->pci_dip), ino_p->ino_ino); for (i = 0; i < ino_p->ino_ih_size; i++, ih_p = ih_p->ih_next) cmn_err(CE_CONT, "!%s-%d#%x ", NAMEINST(ih_p->ih_dip), ih_p->ih_inum); cmn_err(CE_CONT, "!\n"); return (DDI_INTR_CLAIMED); } /* * pci_intr_wrapper * * This routine is used as wrapper around interrupt handlers installed by child * device drivers. This routine invokes the driver interrupt handlers and * examines the return codes. * There is a count of unclaimed interrupts kept on a per-ino basis. If at * least one handler claims the interrupt then the counter is halved and the * interrupt state machine is idled. If no handler claims the interrupt then * the counter is incremented by one and the state machine is idled. * If the count ever reaches the limit value set by pci_unclaimed_intr_max * then the interrupt state machine is not idled thus preventing any further * interrupts on that ino. The state machine will only be idled again if a * handler is subsequently added or removed. * * return value: DDI_INTR_CLAIMED if any handlers claimed the interrupt, * DDI_INTR_UNCLAIMED otherwise. */ extern uint64_t intr_get_time(void); uint_t pci_intr_wrapper(caddr_t arg) { ib_ino_info_t *ino_p = (ib_ino_info_t *)arg; uint_t result = 0, r; pci_t *pci_p = ino_p->ino_ib_p->ib_pci_p; pbm_t *pbm_p = pci_p->pci_pbm_p; ih_t *ih_p = ino_p->ino_ih_start; int i; for (i = 0; i < ino_p->ino_ih_size; i++, ih_p = ih_p->ih_next) { dev_info_t *dip = ih_p->ih_dip; uint_t (*handler)() = ih_p->ih_handler; caddr_t arg1 = ih_p->ih_handler_arg1; caddr_t arg2 = ih_p->ih_handler_arg2; ddi_acc_handle_t cfg_hdl = ih_p->ih_config_handle; if (pci_intr_dma_sync && cfg_hdl && pbm_p->pbm_sync_reg_pa) { (void) pci_config_get16(cfg_hdl, PCI_CONF_VENID); pci_pbm_dma_sync(pbm_p, ino_p->ino_ino); } if (ih_p->ih_intr_state == PCI_INTR_STATE_DISABLE) { DEBUG3(DBG_INTR, pci_p->pci_dip, "pci_intr_wrapper: %s%d interrupt %d is disabled\n", ddi_driver_name(dip), ddi_get_instance(dip), ino_p->ino_ino); continue; } DTRACE_PROBE4(interrupt__start, dev_info_t, dip, void *, handler, caddr_t, arg1, caddr_t, arg2); r = (*handler)(arg1, arg2); /* * Account for time used by this interrupt. Protect against * conflicting writes to ih_ticks from ib_intr_dist_all() by * using atomic ops. */ if (ino_p->ino_pil <= LOCK_LEVEL) atomic_add_64(&ih_p->ih_ticks, intr_get_time()); DTRACE_PROBE4(interrupt__complete, dev_info_t, dip, void *, handler, caddr_t, arg1, int, r); result += r; if (pci_check_all_handlers) continue; if (result) break; } if (!result) return (pci_spurintr(ino_p)); ino_p->ino_unclaimed = 0; IB_INO_INTR_CLEAR(ino_p->ino_clr_reg); /* clear the pending state */ return (DDI_INTR_CLAIMED); } dev_info_t * get_my_childs_dip(dev_info_t *dip, dev_info_t *rdip) { dev_info_t *cdip = rdip; for (; ddi_get_parent(cdip) != dip; cdip = ddi_get_parent(cdip)) ; return (cdip); } /* default class to pil value mapping */ pci_class_val_t pci_default_pil [] = { {0x000000, 0xff0000, 0x1}, /* Class code for pre-2.0 devices */ {0x010000, 0xff0000, 0x4}, /* Mass Storage Controller */ {0x020000, 0xff0000, 0x6}, /* Network Controller */ {0x030000, 0xff0000, 0x9}, /* Display Controller */ {0x040000, 0xff0000, 0x9}, /* Multimedia Controller */ {0x050000, 0xff0000, 0xb}, /* Memory Controller */ {0x060000, 0xff0000, 0xb}, /* Bridge Controller */ {0x0c0000, 0xffff00, 0x9}, /* Serial Bus, FireWire (IEEE 1394) */ {0x0c0100, 0xffff00, 0x4}, /* Serial Bus, ACCESS.bus */ {0x0c0200, 0xffff00, 0x4}, /* Serial Bus, SSA */ {0x0c0300, 0xffff00, 0x9}, /* Serial Bus Universal Serial Bus */ {0x0c0400, 0xffff00, 0x6}, /* Serial Bus, Fibre Channel */ {0x0c0600, 0xffff00, 0x6} /* Serial Bus, Infiniband */ }; /* * Default class to intr_weight value mapping (% of CPU). A driver.conf * entry on or above the pci node like * * pci-class-intr-weights= 0x020000, 0xff0000, 30; * * can be used to augment or override entries in the default table below. * * NB: The values below give NICs preference on redistribution, and provide * NICs some isolation from other interrupt sources. We need better interfaces * that allow the NIC driver to identify a specific NIC instance as high * bandwidth, and thus deserving of separation from other low bandwidth * NICs additional isolation from other interrupt sources. * * NB: We treat Infiniband like a NIC. */ pci_class_val_t pci_default_intr_weight [] = { {0x020000, 0xff0000, 35}, /* Network Controller */ {0x010000, 0xff0000, 10}, /* Mass Storage Controller */ {0x0c0400, 0xffff00, 10}, /* Serial Bus, Fibre Channel */ {0x0c0600, 0xffff00, 50} /* Serial Bus, Infiniband */ }; static uint32_t pci_match_class_val(uint32_t key, pci_class_val_t *rec_p, int nrec, uint32_t default_val) { int i; for (i = 0; i < nrec; rec_p++, i++) { if ((rec_p->class_code & rec_p->class_mask) == (key & rec_p->class_mask)) return (rec_p->class_val); } return (default_val); } /* * Return the configuration value, based on class code and sub class code, * from the specified property based or default pci_class_val_t table. */ uint32_t pci_class_to_val(dev_info_t *rdip, char *property_name, pci_class_val_t *rec_p, int nrec, uint32_t default_val) { int property_len; uint32_t class_code; pci_class_val_t *conf; uint32_t val = default_val; /* * Use the "class-code" property to get the base and sub class * codes for the requesting device. */ class_code = (uint32_t)ddi_prop_get_int(DDI_DEV_T_ANY, rdip, DDI_PROP_DONTPASS, "class-code", -1); if (class_code == -1) return (val); /* look up the val from the default table */ val = pci_match_class_val(class_code, rec_p, nrec, val); /* see if there is a more specific property specified value */ if (ddi_getlongprop(DDI_DEV_T_ANY, rdip, DDI_PROP_NOTPROM, property_name, (caddr_t)&conf, &property_len)) return (val); if ((property_len % sizeof (pci_class_val_t)) == 0) val = pci_match_class_val(class_code, conf, property_len / sizeof (pci_class_val_t), val); kmem_free(conf, property_len); return (val); } /* pci_class_to_pil: return the pil for a given PCI device. */ uint32_t pci_class_to_pil(dev_info_t *rdip) { uint32_t pil; /* default pil is 0 (uninitialized) */ pil = pci_class_to_val(rdip, "pci-class-priorities", pci_default_pil, sizeof (pci_default_pil) / sizeof (pci_class_val_t), 0); /* range check the result */ if (pil >= 0xf) pil = 0; return (pil); } /* pci_class_to_intr_weight: return the intr_weight for a given PCI device. */ int32_t pci_class_to_intr_weight(dev_info_t *rdip) { int32_t intr_weight; /* default weight is 0% */ intr_weight = pci_class_to_val(rdip, "pci-class-intr-weights", pci_default_intr_weight, sizeof (pci_default_intr_weight) / sizeof (pci_class_val_t), 0); /* range check the result */ if (intr_weight < 0) intr_weight = 0; if (intr_weight > 1000) intr_weight = 1000; return (intr_weight); } static struct { kstat_named_t pciintr_ks_name; kstat_named_t pciintr_ks_type; kstat_named_t pciintr_ks_cpu; kstat_named_t pciintr_ks_pil; kstat_named_t pciintr_ks_time; kstat_named_t pciintr_ks_ino; kstat_named_t pciintr_ks_cookie; kstat_named_t pciintr_ks_devpath; kstat_named_t pciintr_ks_buspath; } pciintr_ks_template = { { "name", KSTAT_DATA_CHAR }, { "type", KSTAT_DATA_CHAR }, { "cpu", KSTAT_DATA_UINT64 }, { "pil", KSTAT_DATA_UINT64 }, { "time", KSTAT_DATA_UINT64 }, { "ino", KSTAT_DATA_UINT64 }, { "cookie", KSTAT_DATA_UINT64 }, { "devpath", KSTAT_DATA_STRING }, { "buspath", KSTAT_DATA_STRING }, }; static uint32_t pciintr_ks_instance; kmutex_t pciintr_ks_template_lock; int pci_ks_update(kstat_t *ksp, int rw) { ih_t *ih_p = ksp->ks_private; int maxlen = sizeof (pciintr_ks_template.pciintr_ks_name.value.c); ib_t *ib_p = ih_p->ih_ino_p->ino_ib_p; pci_t *pci_p = ib_p->ib_pci_p; ib_ino_t ino; char ih_devpath[MAXPATHLEN]; char ih_buspath[MAXPATHLEN]; ino = ih_p->ih_ino_p->ino_ino; (void) snprintf(pciintr_ks_template.pciintr_ks_name.value.c, maxlen, "%s%d", ddi_driver_name(ih_p->ih_dip), ddi_get_instance(ih_p->ih_dip)); (void) strcpy(pciintr_ks_template.pciintr_ks_type.value.c, "fixed"); pciintr_ks_template.pciintr_ks_cpu.value.ui64 = ih_p->ih_ino_p->ino_cpuid; pciintr_ks_template.pciintr_ks_pil.value.ui64 = ih_p->ih_ino_p->ino_pil; pciintr_ks_template.pciintr_ks_time.value.ui64 = ih_p->ih_nsec + (uint64_t) tick2ns((hrtime_t)ih_p->ih_ticks, ih_p->ih_ino_p->ino_cpuid); pciintr_ks_template.pciintr_ks_ino.value.ui64 = ino; pciintr_ks_template.pciintr_ks_cookie.value.ui64 = IB_INO_TO_MONDO(ib_p, ino); (void) ddi_pathname(ih_p->ih_dip, ih_devpath); (void) ddi_pathname(pci_p->pci_dip, ih_buspath); kstat_named_setstr(&pciintr_ks_template.pciintr_ks_devpath, ih_devpath); kstat_named_setstr(&pciintr_ks_template.pciintr_ks_buspath, ih_buspath); return (0); } int pci_add_intr(dev_info_t *dip, dev_info_t *rdip, ddi_intr_handle_impl_t *hdlp) { pci_t *pci_p = get_pci_soft_state(ddi_get_instance(dip)); ib_t *ib_p = pci_p->pci_ib_p; cb_t *cb_p = pci_p->pci_cb_p; ih_t *ih_p; ib_ino_t ino; ib_ino_info_t *ino_p; /* pulse interrupts have no ino */ ib_mondo_t mondo; uint32_t cpu_id; int ret; int32_t weight; ino = IB_MONDO_TO_INO(hdlp->ih_vector); DEBUG3(DBG_A_INTX, dip, "pci_add_intr: rdip=%s%d ino=%x\n", ddi_driver_name(rdip), ddi_get_instance(rdip), ino); if (ino > ib_p->ib_max_ino) { DEBUG1(DBG_A_INTX, dip, "ino %x is invalid\n", ino); return (DDI_INTR_NOTFOUND); } if (hdlp->ih_vector & PCI_PULSE_INO) { volatile uint64_t *map_reg_addr; map_reg_addr = ib_intr_map_reg_addr(ib_p, ino); mondo = pci_xlate_intr(dip, rdip, ib_p, ino); if (mondo == 0) goto fail1; hdlp->ih_vector = CB_MONDO_TO_XMONDO(cb_p, mondo); if (i_ddi_add_ivintr(hdlp) != DDI_SUCCESS) goto fail1; /* * Select cpu and program. * * Since there is no good way to always derive cpuid in * pci_remove_intr for PCI_PULSE_INO (esp. for STARFIRE), we * don't add (or remove) device weight for pulsed interrupt * sources. */ mutex_enter(&ib_p->ib_intr_lock); cpu_id = intr_dist_cpuid(); *map_reg_addr = ib_get_map_reg(mondo, cpu_id); mutex_exit(&ib_p->ib_intr_lock); *map_reg_addr; /* flush previous write */ goto done; } if ((mondo = pci_xlate_intr(dip, rdip, pci_p->pci_ib_p, ino)) == 0) goto fail1; ino = IB_MONDO_TO_INO(mondo); mutex_enter(&ib_p->ib_ino_lst_mutex); ih_p = ib_alloc_ih(rdip, hdlp->ih_inum, hdlp->ih_cb_func, hdlp->ih_cb_arg1, hdlp->ih_cb_arg2); if (map_pcidev_cfg_reg(dip, rdip, &ih_p->ih_config_handle)) goto fail2; if (ino_p = ib_locate_ino(ib_p, ino)) { /* sharing ino */ uint32_t intr_index = hdlp->ih_inum; if (ib_ino_locate_intr(ino_p, rdip, intr_index)) { DEBUG1(DBG_A_INTX, dip, "dup intr #%d\n", intr_index); goto fail3; } /* add weight to the cpu that we are already targeting */ cpu_id = ino_p->ino_cpuid; weight = pci_class_to_intr_weight(rdip); intr_dist_cpuid_add_device_weight(cpu_id, rdip, weight); ib_ino_add_intr(pci_p, ino_p, ih_p); goto ino_done; } ino_p = ib_new_ino(ib_p, ino, ih_p); if (hdlp->ih_pri == 0) hdlp->ih_pri = pci_class_to_pil(rdip); hdlp->ih_vector = CB_MONDO_TO_XMONDO(cb_p, mondo); DEBUG2(DBG_A_INTX, dip, "pci_add_intr: pil=0x%x mondo=0x%x\n", hdlp->ih_pri, hdlp->ih_vector); DDI_INTR_ASSIGN_HDLR_N_ARGS(hdlp, (ddi_intr_handler_t *)pci_intr_wrapper, (caddr_t)ino_p, NULL); ret = i_ddi_add_ivintr(hdlp); /* * Restore original interrupt handler * and arguments in interrupt handle. */ DDI_INTR_ASSIGN_HDLR_N_ARGS(hdlp, ih_p->ih_handler, ih_p->ih_handler_arg1, ih_p->ih_handler_arg2); if (ret != DDI_SUCCESS) goto fail4; /* Save the pil for this ino */ ino_p->ino_pil = hdlp->ih_pri; /* clear and enable interrupt */ IB_INO_INTR_CLEAR(ino_p->ino_clr_reg); /* select cpu and compute weight, saving both for sharing and removal */ cpu_id = pci_intr_dist_cpuid(ib_p, ino_p); ino_p->ino_cpuid = cpu_id; ino_p->ino_established = 1; weight = pci_class_to_intr_weight(rdip); intr_dist_cpuid_add_device_weight(cpu_id, rdip, weight); #ifdef _STARFIRE cpu_id = pc_translate_tgtid(cb_p->cb_ittrans_cookie, cpu_id, IB_GET_MAPREG_INO(ino)); #endif /* _STARFIRE */ *ino_p->ino_map_reg = ib_get_map_reg(mondo, cpu_id); *ino_p->ino_map_reg; ino_done: ih_p->ih_ino_p = ino_p; ih_p->ih_ksp = kstat_create("pci_intrs", atomic_inc_32_nv(&pciintr_ks_instance), "config", "interrupts", KSTAT_TYPE_NAMED, sizeof (pciintr_ks_template) / sizeof (kstat_named_t), KSTAT_FLAG_VIRTUAL); if (ih_p->ih_ksp != NULL) { ih_p->ih_ksp->ks_data_size += MAXPATHLEN * 2; ih_p->ih_ksp->ks_lock = &pciintr_ks_template_lock; ih_p->ih_ksp->ks_data = &pciintr_ks_template; ih_p->ih_ksp->ks_private = ih_p; ih_p->ih_ksp->ks_update = pci_ks_update; kstat_install(ih_p->ih_ksp); } ib_ino_map_reg_share(ib_p, ino, ino_p); mutex_exit(&ib_p->ib_ino_lst_mutex); done: DEBUG2(DBG_A_INTX, dip, "done! Interrupt 0x%x pil=%x\n", hdlp->ih_vector, hdlp->ih_pri); return (DDI_SUCCESS); fail4: ib_delete_ino(ib_p, ino_p); fail3: if (ih_p->ih_config_handle) pci_config_teardown(&ih_p->ih_config_handle); fail2: mutex_exit(&ib_p->ib_ino_lst_mutex); kmem_free(ih_p, sizeof (ih_t)); fail1: DEBUG2(DBG_A_INTX, dip, "Failed! Interrupt 0x%x pil=%x\n", hdlp->ih_vector, hdlp->ih_pri); return (DDI_FAILURE); } int pci_remove_intr(dev_info_t *dip, dev_info_t *rdip, ddi_intr_handle_impl_t *hdlp) { pci_t *pci_p = get_pci_soft_state(ddi_get_instance(dip)); ib_t *ib_p = pci_p->pci_ib_p; cb_t *cb_p = pci_p->pci_cb_p; ib_ino_t ino; ib_mondo_t mondo; ib_ino_info_t *ino_p; /* non-pulse only */ ih_t *ih_p; /* non-pulse only */ ino = IB_MONDO_TO_INO(hdlp->ih_vector); DEBUG3(DBG_R_INTX, dip, "pci_rem_intr: rdip=%s%d ino=%x\n", ddi_driver_name(rdip), ddi_get_instance(rdip), ino); if (hdlp->ih_vector & PCI_PULSE_INO) { /* pulse interrupt */ volatile uint64_t *map_reg_addr; /* * No weight was added by pci_add_intr for PCI_PULSE_INO * because it is difficult to determine cpuid here. */ map_reg_addr = ib_intr_map_reg_addr(ib_p, ino); IB_INO_INTR_RESET(map_reg_addr); /* disable intr */ *map_reg_addr; mondo = pci_xlate_intr(dip, rdip, ib_p, ino); if (mondo == 0) { DEBUG1(DBG_R_INTX, dip, "can't get mondo for ino %x\n", ino); return (DDI_FAILURE); } if (hdlp->ih_pri == 0) hdlp->ih_pri = pci_class_to_pil(rdip); hdlp->ih_vector = CB_MONDO_TO_XMONDO(cb_p, mondo); DEBUG2(DBG_R_INTX, dip, "pci_rem_intr: pil=0x%x mondo=0x%x\n", hdlp->ih_pri, hdlp->ih_vector); i_ddi_rem_ivintr(hdlp); DEBUG2(DBG_R_INTX, dip, "pulse success mondo=%x reg=%p\n", mondo, map_reg_addr); return (DDI_SUCCESS); } /* Translate the interrupt property */ mondo = pci_xlate_intr(dip, rdip, pci_p->pci_ib_p, ino); if (mondo == 0) { DEBUG1(DBG_R_INTX, dip, "can't get mondo for ino %x\n", ino); return (DDI_FAILURE); } ino = IB_MONDO_TO_INO(mondo); mutex_enter(&ib_p->ib_ino_lst_mutex); ino_p = ib_locate_ino(ib_p, ino); if (!ino_p) { int r = cb_remove_xintr(pci_p, dip, rdip, ino, mondo); if (r != DDI_SUCCESS) cmn_err(CE_WARN, "%s%d-xintr: ino %x is invalid", ddi_driver_name(dip), ddi_get_instance(dip), ino); mutex_exit(&ib_p->ib_ino_lst_mutex); return (r); } ih_p = ib_ino_locate_intr(ino_p, rdip, hdlp->ih_inum); ib_ino_rem_intr(pci_p, ino_p, ih_p); intr_dist_cpuid_rem_device_weight(ino_p->ino_cpuid, rdip); if (ino_p->ino_ih_size == 0) { IB_INO_INTR_PEND(ib_clear_intr_reg_addr(ib_p, ino)); hdlp->ih_vector = CB_MONDO_TO_XMONDO(cb_p, mondo); if (hdlp->ih_pri == 0) hdlp->ih_pri = pci_class_to_pil(rdip); i_ddi_rem_ivintr(hdlp); ib_delete_ino(ib_p, ino_p); } /* re-enable interrupt only if mapping register still shared */ if (ib_ino_map_reg_unshare(ib_p, ino, ino_p)) { IB_INO_INTR_ON(ino_p->ino_map_reg); *ino_p->ino_map_reg; } mutex_exit(&ib_p->ib_ino_lst_mutex); if (ino_p->ino_ih_size == 0) kmem_free(ino_p, sizeof (ib_ino_info_t)); DEBUG1(DBG_R_INTX, dip, "success! mondo=%x\n", mondo); return (DDI_SUCCESS); } /* * free the pci_inos array allocated during pci_intr_setup. the actual * interrupts are torn down by their respective block destroy routines: * cb_destroy, pbm_destroy, and ib_destroy. */ void pci_intr_teardown(pci_t *pci_p) { kmem_free(pci_p->pci_inos, pci_p->pci_inos_len); pci_p->pci_inos = NULL; pci_p->pci_inos_len = 0; }