/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2010 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * SunOS MT STREAMS ERI(PCI) 10/100 Mb Ethernet Device Driver */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "eri_phy.h" #include "eri_mac.h" #include "eri.h" #include "eri_common.h" #include "eri_msg.h" /* * **** Function Prototypes ***** */ /* * Entry points (man9e) */ static int eri_attach(dev_info_t *, ddi_attach_cmd_t); static int eri_detach(dev_info_t *, ddi_detach_cmd_t); static uint_t eri_intr(caddr_t); /* * I/O (Input/Output) Functions */ static boolean_t eri_send_msg(struct eri *, mblk_t *); static mblk_t *eri_read_dma(struct eri *, volatile struct rmd *, volatile int, uint64_t flags); /* * Initialization Functions */ static boolean_t eri_init(struct eri *); static int eri_allocthings(struct eri *); static int eri_init_xfer_params(struct eri *); static void eri_statinit(struct eri *); static int eri_burstsize(struct eri *); static void eri_setup_mac_address(struct eri *, dev_info_t *); static uint32_t eri_init_rx_channel(struct eri *); static void eri_init_rx(struct eri *); static void eri_init_txmac(struct eri *); /* * Un-init Functions */ static uint32_t eri_txmac_disable(struct eri *); static uint32_t eri_rxmac_disable(struct eri *); static int eri_stop(struct eri *); static void eri_uninit(struct eri *erip); static int eri_freebufs(struct eri *); static boolean_t eri_reclaim(struct eri *, uint32_t); /* * Transceiver (xcvr) Functions */ static int eri_new_xcvr(struct eri *); /* Initializes & detects xcvrs */ static int eri_reset_xcvr(struct eri *); #ifdef ERI_10_10_FORCE_SPEED_WORKAROUND static void eri_xcvr_force_mode(struct eri *, uint32_t *); #endif static void eri_mif_poll(struct eri *, soft_mif_enable_t); static void eri_check_link(struct eri *); static uint32_t eri_check_link_noind(struct eri *); static link_state_t eri_mif_check(struct eri *, uint16_t, uint16_t); static void eri_mii_write(struct eri *, uint8_t, uint16_t); static uint32_t eri_mii_read(struct eri *, uint8_t, uint16_t *); /* * Reset Functions */ static uint32_t eri_etx_reset(struct eri *); static uint32_t eri_erx_reset(struct eri *); /* * Error Functions */ static void eri_fatal_err(struct eri *, uint32_t); static void eri_nonfatal_err(struct eri *, uint32_t); #ifdef ERI_TX_HUNG static int eri_check_txhung(struct eri *); #endif /* * Hardening Functions */ static void eri_fault_msg(struct eri *, uint_t, msg_t, const char *, ...); /* * Misc Functions */ static void eri_savecntrs(struct eri *); static void eri_stop_timer(struct eri *erip); static void eri_start_timer(struct eri *erip, fptrv_t func, clock_t msec); static void eri_bb_force_idle(struct eri *); /* * Utility Functions */ static mblk_t *eri_allocb(size_t size); static mblk_t *eri_allocb_sp(size_t size); static int eri_param_get(queue_t *q, mblk_t *mp, caddr_t cp); static int eri_param_set(queue_t *, mblk_t *, char *, caddr_t); /* * Functions to support ndd */ static void eri_nd_free(caddr_t *nd_pparam); static boolean_t eri_nd_load(caddr_t *nd_pparam, char *name, pfi_t get_pfi, pfi_t set_pfi, caddr_t data); static int eri_nd_getset(queue_t *q, caddr_t nd_param, MBLKP mp); static void eri_param_cleanup(struct eri *); static int eri_param_register(struct eri *, param_t *, int); static void eri_process_ndd_ioctl(struct eri *, queue_t *, mblk_t *, int); static int eri_mk_mblk_tail_space(mblk_t *, mblk_t **, size_t); static void eri_loopback(struct eri *, queue_t *, mblk_t *); static uint32_t eri_ladrf_bit(const uint8_t *); /* * Nemo (GLDv3) Functions. */ static int eri_m_stat(void *, uint_t, uint64_t *); static int eri_m_start(void *); static void eri_m_stop(void *); static int eri_m_promisc(void *, boolean_t); static int eri_m_multicst(void *, boolean_t, const uint8_t *); static int eri_m_unicst(void *, const uint8_t *); static void eri_m_ioctl(void *, queue_t *, mblk_t *); static boolean_t eri_m_getcapab(void *, mac_capab_t, void *); static mblk_t *eri_m_tx(void *, mblk_t *); static mac_callbacks_t eri_m_callbacks = { MC_IOCTL | MC_GETCAPAB, eri_m_stat, eri_m_start, eri_m_stop, eri_m_promisc, eri_m_multicst, eri_m_unicst, eri_m_tx, NULL, eri_m_ioctl, eri_m_getcapab }; /* * Define PHY Vendors: Matches to IEEE * Organizationally Unique Identifier (OUI) */ /* * The first two are supported as Internal XCVRs */ #define PHY_VENDOR_LUCENT 0x601d #define PHY_LINK_NONE 0 /* Not attempted yet or retry */ #define PHY_LINK_DOWN 1 /* Not being used */ #define PHY_LINK_UP 2 /* Not being used */ #define AUTO_SPEED 0 #define FORCE_SPEED 1 /* * MIB II broadcast/multicast packets */ #define IS_BROADCAST(pkt) (bcmp(pkt, ðerbroadcastaddr, ETHERADDRL) == 0) #define IS_MULTICAST(pkt) ((pkt[0] & 01) == 1) #define BUMP_InNUcast(erip, pkt) \ if (IS_BROADCAST(pkt)) { \ HSTAT(erip, brdcstrcv); \ } else if (IS_MULTICAST(pkt)) { \ HSTAT(erip, multircv); \ } #define BUMP_OutNUcast(erip, pkt) \ if (IS_BROADCAST(pkt)) { \ HSTAT(erip, brdcstxmt); \ } else if (IS_MULTICAST(pkt)) { \ HSTAT(erip, multixmt); \ } #define NEXTTMDP(tbasep, tmdlimp, tmdp) (((tmdp) + 1) == tmdlimp \ ? tbasep : ((tmdp) + 1)) #define ETHERHEADER_SIZE (sizeof (struct ether_header)) #ifdef ERI_RCV_CKSUM #define ERI_PROCESS_READ(erip, bp, sum) \ { \ t_uscalar_t type; \ uint_t start_offset, end_offset; \ \ *(bp->b_wptr) = 0; /* pad byte */ \ \ /* \ * update MIB II statistics \ */ \ HSTAT(erip, ipackets64); \ HSTATN(erip, rbytes64, len); \ BUMP_InNUcast(erip, bp->b_rptr); \ type = get_ether_type(bp->b_rptr); \ if (type == ETHERTYPE_IP || type == ETHERTYPE_IPV6) { \ start_offset = 0; \ end_offset = MBLKL(bp) - ETHERHEADER_SIZE; \ mac_hcksum_set(bp, \ start_offset, 0, end_offset, sum, \ HCK_PARTIALCKSUM); \ } else { \ /* \ * Strip the PADS for 802.3 \ */ \ if (type <= ETHERMTU) \ bp->b_wptr = bp->b_rptr + \ ETHERHEADER_SIZE + type; \ } \ } #else #define ERI_PROCESS_READ(erip, bp) \ { \ t_uscalar_t type; \ type = get_ether_type(bp->b_rptr); \ \ /* \ * update MIB II statistics \ */ \ HSTAT(erip, ipackets64); \ HSTATN(erip, rbytes64, len); \ BUMP_InNUcast(erip, bp->b_rptr); \ /* \ * Strip the PADS for 802.3 \ */ \ if (type <= ETHERMTU) \ bp->b_wptr = bp->b_rptr + ETHERHEADER_SIZE + \ type; \ } #endif /* ERI_RCV_CKSUM */ /* * TX Interrupt Rate */ static int tx_interrupt_rate = 16; /* * Ethernet broadcast address definition. */ static uint8_t etherbroadcastaddr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; /* * The following variables are used for configuring various features */ #define ERI_DESC_HANDLE_ALLOC 0x0001 #define ERI_DESC_MEM_ALLOC 0x0002 #define ERI_DESC_MEM_MAP 0x0004 #define ERI_RCV_HANDLE_ALLOC 0x0020 #define ERI_RCV_HANDLE_BIND 0x0040 #define ERI_XMIT_DVMA_ALLOC 0x0100 #define ERI_RCV_DVMA_ALLOC 0x0200 #define ERI_XBUFS_HANDLE_ALLOC 0x0400 #define ERI_XBUFS_KMEM_ALLOC 0x0800 #define ERI_XBUFS_KMEM_DMABIND 0x1000 #define ERI_DONT_STRIP_CRC /* * Translate a kernel virtual address to i/o address. */ #define ERI_IOPBIOADDR(erip, a) \ ((erip)->iopbiobase + ((uintptr_t)a - (erip)->iopbkbase)) /* * ERI Configuration Register Value * Used to configure parameters that define DMA burst * and internal arbitration behavior. * for equal TX and RX bursts, set the following in global * configuration register. * static int global_config = 0x42; */ /* * ERI ERX Interrupt Blanking Time * Each count is about 16 us (2048 clocks) for 66 MHz PCI. */ static int intr_blank_time = 6; /* for about 96 us */ static int intr_blank_packets = 8; /* */ /* * ERX PAUSE Threshold Register value * The following value is for an OFF Threshold of about 15.5 Kbytes * and an ON Threshold of 4K bytes. */ static int rx_pause_threshold = 0xf8 | (0x40 << 12); static int eri_reinit_fatal = 0; #ifdef DEBUG static int noteri = 0; #endif #ifdef ERI_TX_HUNG static int eri_reinit_txhung = 0; #endif #ifdef ERI_HDX_BUG_WORKAROUND /* * By default enable padding in hdx mode to 97 bytes. * To disabled, in /etc/system: * set eri:eri_hdx_pad_enable=0 */ static uchar_t eri_hdx_pad_enable = 1; #endif /* * Default values to initialize the cache line size and latency timer * registers in the PCI configuration space. * ERI_G_CACHE_LINE_SIZE_16 is defined as 16 since RIO expects in units * of 4 bytes. */ #ifdef ERI_PM_WORKAROUND_PCI static int eri_pci_cache_line = ERI_G_CACHE_LINE_SIZE_32; /* 128 bytes */ static int eri_pci_latency_timer = 0xff; /* 255 PCI cycles */ #else static int eri_pci_cache_line = ERI_G_CACHE_LINE_SIZE_16; /* 64 bytes */ static int eri_pci_latency_timer = 0x40; /* 64 PCI cycles */ #endif #define ERI_CACHE_LINE_SIZE (eri_pci_cache_line << ERI_G_CACHE_BIT) /* * Claim the device is ultra-capable of burst in the beginning. Use * the value returned by ddi_dma_burstsizes() to actually set the ERI * global configuration register later. * * PCI_ERI supports Infinite burst or 64-byte-multiple bursts. */ #define ERI_LIMADDRLO ((uint64_t)0x00000000) #define ERI_LIMADDRHI ((uint64_t)0xffffffff) static ddi_dma_attr_t dma_attr = { DMA_ATTR_V0, /* version number. */ (uint64_t)ERI_LIMADDRLO, /* low address */ (uint64_t)ERI_LIMADDRHI, /* high address */ (uint64_t)0x00ffffff, /* address counter max */ (uint64_t)1, /* alignment */ (uint_t)0xe000e0, /* dlim_burstsizes for 32 4 bit xfers */ (uint32_t)0x1, /* minimum transfer size */ (uint64_t)0x7fffffff, /* maximum transfer size */ (uint64_t)0x00ffffff, /* maximum segment size */ 1, /* scatter/gather list length */ (uint32_t)1, /* granularity */ (uint_t)0 /* attribute flags */ }; static ddi_dma_attr_t desc_dma_attr = { DMA_ATTR_V0, /* version number. */ (uint64_t)ERI_LIMADDRLO, /* low address */ (uint64_t)ERI_LIMADDRHI, /* high address */ (uint64_t)0x00ffffff, /* address counter max */ (uint64_t)8, /* alignment */ (uint_t)0xe000e0, /* dlim_burstsizes for 32 4 bit xfers */ (uint32_t)0x1, /* minimum transfer size */ (uint64_t)0x7fffffff, /* maximum transfer size */ (uint64_t)0x00ffffff, /* maximum segment size */ 1, /* scatter/gather list length */ 16, /* granularity */ 0 /* attribute flags */ }; static ddi_device_acc_attr_t buf_attr = { DDI_DEVICE_ATTR_V0, /* devacc_attr_version */ DDI_NEVERSWAP_ACC, /* devacc_attr_endian_flags */ DDI_STRICTORDER_ACC, /* devacc_attr_dataorder */ DDI_DEFAULT_ACC, /* devacc_attr_access */ }; ddi_dma_lim_t eri_dma_limits = { (uint64_t)ERI_LIMADDRLO, /* dlim_addr_lo */ (uint64_t)ERI_LIMADDRHI, /* dlim_addr_hi */ (uint64_t)ERI_LIMADDRHI, /* dlim_cntr_max */ (uint_t)0x00e000e0, /* dlim_burstsizes for 32 and 64 bit xfers */ (uint32_t)0x1, /* dlim_minxfer */ 1024 /* dlim_speed */ }; /* * Link Configuration variables * * On Motherboard implementations, 10/100 Mbps speeds may be supported * by using both the Serial Link and the MII on Non-serial-link interface. * When both links are present, the driver automatically tries to bring up * both. If both are up, the Gigabit Serial Link is selected for use, by * default. The following configuration variable is used to force the selection * of one of the links when both are up. * To change the default selection to the MII link when both the Serial * Link and the MII link are up, change eri_default_link to 1. * * Once a link is in use, the driver will continue to use that link till it * goes down. When it goes down, the driver will look at the status of both the * links again for link selection. * * Currently the standard is not stable w.r.t. gigabit link configuration * using auto-negotiation procedures. Meanwhile, the link may be configured * in "forced" mode using the "autonegotiation enable" bit (bit-12) in the * PCS MII Command Register. In this mode the PCS sends "idles" until sees * "idles" as initialization instead of the Link Configuration protocol * where a Config register is exchanged. In this mode, the ERI is programmed * for full-duplex operation with both pauseTX and pauseRX (for flow control) * enabled. */ static int select_link = 0; /* automatic selection */ static int default_link = 0; /* Select Serial link if both are up */ /* * The following variables are used for configuring link-operation * for all the "eri" interfaces in the system. * Later these parameters may be changed per interface using "ndd" command * These parameters may also be specified as properties using the .conf * file mechanism for each interface. */ /* * The following variable value will be overridden by "link-pulse-disabled" * property which may be created by OBP or eri.conf file. This property is * applicable only for 10 Mbps links. */ static int link_pulse_disabled = 0; /* link pulse disabled */ /* For MII-based FastEthernet links */ static int adv_autoneg_cap = 1; static int adv_100T4_cap = 0; static int adv_100fdx_cap = 1; static int adv_100hdx_cap = 1; static int adv_10fdx_cap = 1; static int adv_10hdx_cap = 1; static int adv_pauseTX_cap = 0; static int adv_pauseRX_cap = 0; /* * The following gap parameters are in terms of byte times. */ static int ipg0 = 8; static int ipg1 = 8; static int ipg2 = 4; static int lance_mode = 1; /* to enable LANCE mode */ static int mifpoll_enable = 0; /* to enable mif poll */ static int ngu_enable = 0; /* to enable Never Give Up mode */ static int eri_force_mlf = 0; /* to enable mif poll */ static int eri_phy_mintrans = 1; /* Lu3X31T mintrans algorithm */ /* * For the MII interface, the External Transceiver is selected when present. * The following variable is used to select the Internal Transceiver even * when the External Transceiver is present. */ static int use_int_xcvr = 0; static int pace_size = 0; /* Do not use pacing for now */ static int eri_use_dvma_rx = 0; /* =1:use dvma */ static int eri_rx_bcopy_max = RX_BCOPY_MAX; /* =1:use bcopy() */ static int eri_overflow_reset = 1; /* global reset if rx_fifo_overflow */ static int eri_tx_ring_size = 2048; /* number of entries in tx ring */ static int eri_rx_ring_size = 1024; /* number of entries in rx ring */ /* * The following parameters may be configured by the user. If they are not * configured by the user, the values will be based on the capabilities of * the transceiver. * The value "ERI_NOTUSR" is ORed with the parameter value to indicate values * which are NOT configured by the user. */ #define ERI_NOTUSR 0x0f000000 #define ERI_MASK_1BIT 0x1 #define ERI_MASK_2BIT 0x3 #define ERI_MASK_8BIT 0xff /* * Note: * ERI has all of the above capabilities. * Only when an External Transceiver is selected for MII-based FastEthernet * link operation, the capabilities depend upon the capabilities of the * External Transceiver. */ /* ------------------------------------------------------------------------- */ static param_t param_arr[] = { /* min max value r/w/hidden+name */ { 0, 2, 2, "-transceiver_inuse"}, { 0, 1, 0, "-link_status"}, { 0, 1, 0, "-link_speed"}, { 0, 1, 0, "-link_mode"}, { 0, 255, 8, "+ipg1"}, { 0, 255, 4, "+ipg2"}, { 0, 1, 0, "+use_int_xcvr"}, { 0, 255, 0, "+pace_size"}, { 0, 1, 1, "+adv_autoneg_cap"}, { 0, 1, 1, "+adv_100T4_cap"}, { 0, 1, 1, "+adv_100fdx_cap"}, { 0, 1, 1, "+adv_100hdx_cap"}, { 0, 1, 1, "+adv_10fdx_cap"}, { 0, 1, 1, "+adv_10hdx_cap"}, { 0, 1, 1, "-autoneg_cap"}, { 0, 1, 1, "-100T4_cap"}, { 0, 1, 1, "-100fdx_cap"}, { 0, 1, 1, "-100hdx_cap"}, { 0, 1, 1, "-10fdx_cap"}, { 0, 1, 1, "-10hdx_cap"}, { 0, 1, 0, "-lp_autoneg_cap"}, { 0, 1, 0, "-lp_100T4_cap"}, { 0, 1, 0, "-lp_100fdx_cap"}, { 0, 1, 0, "-lp_100hdx_cap"}, { 0, 1, 0, "-lp_10fdx_cap"}, { 0, 1, 0, "-lp_10hdx_cap"}, { 0, 1, 1, "+lance_mode"}, { 0, 31, 8, "+ipg0"}, { 0, 127, 6, "+intr_blank_time"}, { 0, 255, 8, "+intr_blank_packets"}, { 0, 1, 1, "!serial-link"}, { 0, 2, 1, "!non-serial-link"}, { 0, 1, 0, "%select-link"}, { 0, 1, 0, "%default-link"}, { 0, 2, 0, "!link-in-use"}, { 0, 1, 1, "%adv_asm_dir_cap"}, { 0, 1, 1, "%adv_pause_cap"}, { 0, 1, 0, "!asm_dir_cap"}, { 0, 1, 0, "!pause_cap"}, { 0, 1, 0, "!lp_asm_dir_cap"}, { 0, 1, 0, "!lp_pause_cap"}, }; DDI_DEFINE_STREAM_OPS(eri_dev_ops, nulldev, nulldev, eri_attach, eri_detach, nodev, NULL, D_MP, NULL, ddi_quiesce_not_supported); /* * This is the loadable module wrapper. */ #include /* * Module linkage information for the kernel. */ static struct modldrv modldrv = { &mod_driverops, /* Type of module. This one is a driver */ "Sun RIO 10/100 Mb Ethernet", &eri_dev_ops, /* driver ops */ }; static struct modlinkage modlinkage = { MODREV_1, &modldrv, NULL }; /* * Hardware Independent Functions * New Section */ int _init(void) { int status; mac_init_ops(&eri_dev_ops, "eri"); if ((status = mod_install(&modlinkage)) != 0) { mac_fini_ops(&eri_dev_ops); } return (status); } int _fini(void) { int status; status = mod_remove(&modlinkage); if (status == 0) { mac_fini_ops(&eri_dev_ops); } return (status); } int _info(struct modinfo *modinfop) { return (mod_info(&modlinkage, modinfop)); } /* * Interface exists: make available by filling in network interface * record. System will initialize the interface when it is ready * to accept packets. */ static int eri_attach(dev_info_t *dip, ddi_attach_cmd_t cmd) { struct eri *erip = NULL; mac_register_t *macp = NULL; int regno; boolean_t doinit; boolean_t mutex_inited = B_FALSE; boolean_t intr_add = B_FALSE; switch (cmd) { case DDI_ATTACH: break; case DDI_RESUME: if ((erip = ddi_get_driver_private(dip)) == NULL) return (DDI_FAILURE); mutex_enter(&erip->intrlock); erip->flags &= ~ERI_SUSPENDED; erip->init_macregs = 1; param_linkup = 0; erip->stats.link_up = LINK_STATE_DOWN; erip->linkcheck = 0; doinit = (erip->flags & ERI_STARTED) ? B_TRUE : B_FALSE; mutex_exit(&erip->intrlock); if (doinit && !eri_init(erip)) { return (DDI_FAILURE); } return (DDI_SUCCESS); default: return (DDI_FAILURE); } /* * Allocate soft device data structure */ erip = kmem_zalloc(sizeof (struct eri), KM_SLEEP); /* * Initialize as many elements as possible. */ ddi_set_driver_private(dip, erip); erip->dip = dip; /* dip */ erip->instance = ddi_get_instance(dip); /* instance */ erip->flags = 0; erip->multi_refcnt = 0; erip->promisc = B_FALSE; if ((macp = mac_alloc(MAC_VERSION)) == NULL) { ERI_FAULT_MSG1(erip, SEVERITY_HIGH, ERI_VERB_MSG, "mac_alloc failed"); goto attach_fail; } macp->m_type_ident = MAC_PLUGIN_IDENT_ETHER; macp->m_driver = erip; macp->m_dip = dip; macp->m_src_addr = erip->ouraddr; macp->m_callbacks = &eri_m_callbacks; macp->m_min_sdu = 0; macp->m_max_sdu = ETHERMTU; macp->m_margin = VLAN_TAGSZ; /* * Map in the device registers. * Separate pointers will be set up for the following * register groups within the GEM Register Space: * Global register set * ETX register set * ERX register set * BigMAC register set. * MIF register set */ if (ddi_dev_nregs(dip, ®no) != (DDI_SUCCESS)) { ERI_FAULT_MSG2(erip, SEVERITY_HIGH, ERI_VERB_MSG, "ddi_dev_nregs failed, returned %d", regno); goto attach_fail; } /* * Map the PCI config space */ if (pci_config_setup(dip, &erip->pci_config_handle) != DDI_SUCCESS) { ERI_FAULT_MSG2(erip, SEVERITY_HIGH, ERI_VERB_MSG, "%s pci_config_setup()", config_space_fatal_msg); goto attach_fail; } /* * Initialize device attributes structure */ erip->dev_attr.devacc_attr_version = DDI_DEVICE_ATTR_V0; erip->dev_attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC; erip->dev_attr.devacc_attr_endian_flags = DDI_STRUCTURE_LE_ACC; if (ddi_regs_map_setup(dip, 1, (caddr_t *)&(erip->globregp), 0, 0, &erip->dev_attr, &erip->globregh)) { goto attach_fail; } erip->etxregh = erip->globregh; erip->erxregh = erip->globregh; erip->bmacregh = erip->globregh; erip->mifregh = erip->globregh; erip->etxregp = (void *)(((caddr_t)erip->globregp) + 0x2000); erip->erxregp = (void *)(((caddr_t)erip->globregp) + 0x4000); erip->bmacregp = (void *)(((caddr_t)erip->globregp) + 0x6000); erip->mifregp = (void *)(((caddr_t)erip->globregp) + 0x6200); /* * Map the software reset register. */ if (ddi_regs_map_setup(dip, 1, (caddr_t *)&(erip->sw_reset_reg), 0x1010, 4, &erip->dev_attr, &erip->sw_reset_regh)) { ERI_FAULT_MSG1(erip, SEVERITY_MID, ERI_VERB_MSG, mregs_4soft_reset_fail_msg); goto attach_fail; } /* * Try and stop the device. * This is done until we want to handle interrupts. */ if (eri_stop(erip)) goto attach_fail; /* * set PCI latency timer register. */ pci_config_put8(erip->pci_config_handle, PCI_CONF_LATENCY_TIMER, (uchar_t)eri_pci_latency_timer); if (ddi_intr_hilevel(dip, 0)) { ERI_FAULT_MSG1(erip, SEVERITY_NONE, ERI_VERB_MSG, " high-level interrupts are not supported"); goto attach_fail; } /* * Get the interrupt cookie so the mutexes can be * Initialized. */ if (ddi_get_iblock_cookie(dip, 0, &erip->cookie) != DDI_SUCCESS) goto attach_fail; /* * Initialize mutex's for this device. */ mutex_init(&erip->xmitlock, NULL, MUTEX_DRIVER, (void *)erip->cookie); mutex_init(&erip->intrlock, NULL, MUTEX_DRIVER, (void *)erip->cookie); mutex_init(&erip->linklock, NULL, MUTEX_DRIVER, (void *)erip->cookie); mutex_init(&erip->xcvrlock, NULL, MUTEX_DRIVER, (void *)erip->cookie); mutex_inited = B_TRUE; /* * Add interrupt to system */ if (ddi_add_intr(dip, 0, &erip->cookie, 0, eri_intr, (caddr_t)erip) == DDI_SUCCESS) intr_add = B_TRUE; else { goto attach_fail; } /* * Set up the ethernet mac address. */ (void) eri_setup_mac_address(erip, dip); if (eri_init_xfer_params(erip)) goto attach_fail; if (eri_burstsize(erip) == DDI_FAILURE) { goto attach_fail; } /* * Setup fewer receive bufers. */ ERI_RPENDING = eri_rx_ring_size; ERI_TPENDING = eri_tx_ring_size; erip->rpending_mask = ERI_RPENDING - 1; erip->rmdmax_mask = ERI_RPENDING - 1; erip->mif_config = (ERI_PHY_BMSR << ERI_MIF_CFGPR_SHIFT); erip->stats.pmcap = ERI_PMCAP_NONE; if (pci_report_pmcap(dip, PCI_PM_IDLESPEED, (void *)4000) == DDI_SUCCESS) erip->stats.pmcap = ERI_PMCAP_4MHZ; if (mac_register(macp, &erip->mh) != 0) goto attach_fail; mac_free(macp); return (DDI_SUCCESS); attach_fail: if (erip->pci_config_handle) (void) pci_config_teardown(&erip->pci_config_handle); if (mutex_inited) { mutex_destroy(&erip->xmitlock); mutex_destroy(&erip->intrlock); mutex_destroy(&erip->linklock); mutex_destroy(&erip->xcvrlock); } ERI_FAULT_MSG1(erip, SEVERITY_NONE, ERI_VERB_MSG, attach_fail_msg); if (intr_add) ddi_remove_intr(dip, 0, erip->cookie); if (erip->globregh) ddi_regs_map_free(&erip->globregh); if (macp != NULL) mac_free(macp); if (erip != NULL) kmem_free(erip, sizeof (*erip)); return (DDI_FAILURE); } static int eri_detach(dev_info_t *dip, ddi_detach_cmd_t cmd) { struct eri *erip; int i; if ((erip = ddi_get_driver_private(dip)) == NULL) { /* * No resources allocated. */ return (DDI_FAILURE); } switch (cmd) { case DDI_DETACH: break; case DDI_SUSPEND: erip->flags |= ERI_SUSPENDED; eri_uninit(erip); return (DDI_SUCCESS); default: return (DDI_FAILURE); } if (erip->flags & (ERI_RUNNING | ERI_SUSPENDED)) { ERI_FAULT_MSG1(erip, SEVERITY_NONE, ERI_VERB_MSG, busy_msg); return (DDI_FAILURE); } if (mac_unregister(erip->mh) != 0) { return (DDI_FAILURE); } /* * Make the device quiescent */ (void) eri_stop(erip); /* * Remove instance of the intr */ ddi_remove_intr(dip, 0, erip->cookie); if (erip->pci_config_handle) (void) pci_config_teardown(&erip->pci_config_handle); /* * Destroy all mutexes and data structures allocated during * attach time. */ if (erip->globregh) ddi_regs_map_free(&erip->globregh); erip->etxregh = NULL; erip->erxregh = NULL; erip->bmacregh = NULL; erip->mifregh = NULL; erip->globregh = NULL; if (erip->sw_reset_regh) ddi_regs_map_free(&erip->sw_reset_regh); if (erip->ksp) kstat_delete(erip->ksp); eri_stop_timer(erip); /* acquire linklock */ eri_start_timer(erip, eri_check_link, 0); mutex_destroy(&erip->xmitlock); mutex_destroy(&erip->intrlock); mutex_destroy(&erip->linklock); mutex_destroy(&erip->xcvrlock); if (erip->md_h) { if (ddi_dma_unbind_handle(erip->md_h) == DDI_FAILURE) return (DDI_FAILURE); ddi_dma_mem_free(&erip->mdm_h); ddi_dma_free_handle(&erip->md_h); } if (eri_freebufs(erip)) return (DDI_FAILURE); /* dvma handle case */ if (erip->eri_dvmarh) { (void) dvma_release(erip->eri_dvmarh); erip->eri_dvmarh = NULL; } /* * xmit_dma_mode, erip->ndmaxh[i]=NULL for dvma */ else { for (i = 0; i < ERI_RPENDING; i++) if (erip->ndmarh[i]) ddi_dma_free_handle(&erip->ndmarh[i]); } /* * Release TX buffer */ if (erip->tbuf_ioaddr != 0) { (void) ddi_dma_unbind_handle(erip->tbuf_handle); erip->tbuf_ioaddr = 0; } if (erip->tbuf_kaddr != NULL) { ddi_dma_mem_free(&erip->tbuf_acch); erip->tbuf_kaddr = NULL; } if (erip->tbuf_handle != NULL) { ddi_dma_free_handle(&erip->tbuf_handle); erip->tbuf_handle = NULL; } eri_param_cleanup(erip); ddi_set_driver_private(dip, NULL); kmem_free((caddr_t)erip, sizeof (struct eri)); return (DDI_SUCCESS); } /* * To set up the mac address for the network interface: * The adapter card may support a local mac address which is published * in a device node property "local-mac-address". This mac address is * treated as the factory-installed mac address for DLPI interface. * If the adapter firmware has used the device for diskless boot * operation it publishes a property called "mac-address" for use by * inetboot and the device driver. * If "mac-address" is not found, the system options property * "local-mac-address" is used to select the mac-address. If this option * is set to "true", and "local-mac-address" has been found, then * local-mac-address is used; otherwise the system mac address is used * by calling the "localetheraddr()" function. */ static void eri_setup_mac_address(struct eri *erip, dev_info_t *dip) { uchar_t *prop; char *uselocal; unsigned prop_len; uint32_t addrflags = 0; struct ether_addr factaddr; /* * Check if it is an adapter with its own local mac address * If it is present, save it as the "factory-address" * for this adapter. */ if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "local-mac-address", &prop, &prop_len) == DDI_PROP_SUCCESS) { if (prop_len == ETHERADDRL) { addrflags = ERI_FACTADDR_PRESENT; bcopy(prop, &factaddr, ETHERADDRL); ERI_FAULT_MSG2(erip, SEVERITY_NONE, ERI_VERB_MSG, lether_addr_msg, ether_sprintf(&factaddr)); } ddi_prop_free(prop); } /* * Check if the adapter has published "mac-address" property. * If it is present, use it as the mac address for this device. */ if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "mac-address", &prop, &prop_len) == DDI_PROP_SUCCESS) { if (prop_len >= ETHERADDRL) { bcopy(prop, erip->ouraddr, ETHERADDRL); ddi_prop_free(prop); return; } ddi_prop_free(prop); } if (ddi_prop_lookup_string(DDI_DEV_T_ANY, dip, 0, "local-mac-address?", &uselocal) == DDI_PROP_SUCCESS) { if ((strcmp("true", uselocal) == 0) && (addrflags & ERI_FACTADDR_PRESENT)) { addrflags |= ERI_FACTADDR_USE; bcopy(&factaddr, erip->ouraddr, ETHERADDRL); ddi_prop_free(uselocal); ERI_FAULT_MSG1(erip, SEVERITY_NONE, ERI_VERB_MSG, lmac_addr_msg); return; } ddi_prop_free(uselocal); } /* * Get the system ethernet address. */ (void) localetheraddr(NULL, &factaddr); bcopy(&factaddr, erip->ouraddr, ETHERADDRL); } /* * Calculate the bit in the multicast address filter that selects the given * address. * Note: For ERI, the last 8-bits are used. */ static uint32_t eri_ladrf_bit(const uint8_t *addr) { uint32_t crc; CRC32(crc, addr, ETHERADDRL, -1U, crc32_table); /* * Just want the 8 most significant bits. */ return ((~crc) >> 24); } static void eri_m_ioctl(void *arg, queue_t *wq, mblk_t *mp) { struct eri *erip = arg; struct iocblk *iocp = (void *)mp->b_rptr; int err; ASSERT(erip != NULL); /* * Privilege checks. */ switch (iocp->ioc_cmd) { case ERI_SET_LOOP_MODE: case ERI_ND_SET: err = secpolicy_net_config(iocp->ioc_cr, B_FALSE); if (err != 0) { miocnak(wq, mp, 0, err); return; } break; default: break; } switch (iocp->ioc_cmd) { case ERI_ND_GET: case ERI_ND_SET: eri_process_ndd_ioctl(erip, wq, mp, iocp->ioc_cmd); break; case ERI_SET_LOOP_MODE: case ERI_GET_LOOP_MODE: /* * XXX: Consider updating this to the new netlb ioctls. */ eri_loopback(erip, wq, mp); break; default: miocnak(wq, mp, 0, EINVAL); break; } ASSERT(!MUTEX_HELD(&erip->linklock)); } static void eri_loopback(struct eri *erip, queue_t *wq, mblk_t *mp) { struct iocblk *iocp = (void *)mp->b_rptr; loopback_t *al; if (mp->b_cont == NULL || MBLKL(mp->b_cont) < sizeof (loopback_t)) { miocnak(wq, mp, 0, EINVAL); return; } al = (void *)mp->b_cont->b_rptr; switch (iocp->ioc_cmd) { case ERI_SET_LOOP_MODE: switch (al->loopback) { case ERI_LOOPBACK_OFF: erip->flags &= (~ERI_MACLOOPBACK & ~ERI_SERLOOPBACK); /* force link status to go down */ param_linkup = 0; erip->stats.link_up = LINK_STATE_DOWN; erip->stats.link_duplex = LINK_DUPLEX_UNKNOWN; (void) eri_init(erip); break; case ERI_MAC_LOOPBACK_ON: erip->flags |= ERI_MACLOOPBACK; erip->flags &= ~ERI_SERLOOPBACK; param_linkup = 0; erip->stats.link_up = LINK_STATE_DOWN; erip->stats.link_duplex = LINK_DUPLEX_UNKNOWN; (void) eri_init(erip); break; case ERI_PCS_LOOPBACK_ON: break; case ERI_SER_LOOPBACK_ON: erip->flags |= ERI_SERLOOPBACK; erip->flags &= ~ERI_MACLOOPBACK; /* force link status to go down */ param_linkup = 0; erip->stats.link_up = LINK_STATE_DOWN; erip->stats.link_duplex = LINK_DUPLEX_UNKNOWN; (void) eri_init(erip); break; default: ERI_FAULT_MSG1(erip, SEVERITY_NONE, ERI_VERB_MSG, loopback_val_default); miocnak(wq, mp, 0, EINVAL); return; } miocnak(wq, mp, 0, 0); break; case ERI_GET_LOOP_MODE: al->loopback = ERI_MAC_LOOPBACK_ON | ERI_PCS_LOOPBACK_ON | ERI_SER_LOOPBACK_ON; miocack(wq, mp, sizeof (loopback_t), 0); break; default: ERI_FAULT_MSG1(erip, SEVERITY_LOW, ERI_VERB_MSG, loopback_cmd_default); } } static int eri_m_promisc(void *arg, boolean_t on) { struct eri *erip = arg; mutex_enter(&erip->intrlock); erip->promisc = on; eri_init_rx(erip); mutex_exit(&erip->intrlock); return (0); } /* * This is to support unlimited number of members * in Multicast. */ static int eri_m_multicst(void *arg, boolean_t add, const uint8_t *mca) { struct eri *erip = arg; uint32_t ladrf_bit; /* * If this address's bit was not already set in the local address * filter, add it and re-initialize the Hardware. */ ladrf_bit = eri_ladrf_bit(mca); mutex_enter(&erip->intrlock); if (add) { erip->ladrf_refcnt[ladrf_bit]++; if (erip->ladrf_refcnt[ladrf_bit] == 1) { LADRF_SET(erip, ladrf_bit); erip->multi_refcnt++; eri_init_rx(erip); } } else { erip->ladrf_refcnt[ladrf_bit]--; if (erip->ladrf_refcnt[ladrf_bit] == 0) { LADRF_CLR(erip, ladrf_bit); erip->multi_refcnt--; eri_init_rx(erip); } } mutex_exit(&erip->intrlock); return (0); } static int eri_m_unicst(void *arg, const uint8_t *macaddr) { struct eri *erip = arg; /* * Set new interface local address and re-init device. * This is destructive to any other streams attached * to this device. */ mutex_enter(&erip->intrlock); bcopy(macaddr, &erip->ouraddr, ETHERADDRL); eri_init_rx(erip); mutex_exit(&erip->intrlock); return (0); } /*ARGSUSED*/ static boolean_t eri_m_getcapab(void *arg, mac_capab_t cap, void *cap_data) { switch (cap) { case MAC_CAPAB_HCKSUM: { uint32_t *hcksum_txflags = cap_data; *hcksum_txflags = HCKSUM_INET_PARTIAL; return (B_TRUE); } default: return (B_FALSE); } } static int eri_m_start(void *arg) { struct eri *erip = arg; mutex_enter(&erip->intrlock); erip->flags |= ERI_STARTED; mutex_exit(&erip->intrlock); if (!eri_init(erip)) { mutex_enter(&erip->intrlock); erip->flags &= ~ERI_STARTED; mutex_exit(&erip->intrlock); return (EIO); } return (0); } static void eri_m_stop(void *arg) { struct eri *erip = arg; mutex_enter(&erip->intrlock); erip->flags &= ~ERI_STARTED; mutex_exit(&erip->intrlock); eri_uninit(erip); } static int eri_m_stat(void *arg, uint_t stat, uint64_t *val) { struct eri *erip = arg; struct stats *esp; boolean_t macupdate = B_FALSE; esp = &erip->stats; mutex_enter(&erip->xmitlock); if ((erip->flags & ERI_RUNNING) && (erip->flags & ERI_TXINIT)) { erip->tx_completion = GET_ETXREG(tx_completion) & ETX_COMPLETION_MASK; macupdate |= eri_reclaim(erip, erip->tx_completion); } mutex_exit(&erip->xmitlock); if (macupdate) mac_tx_update(erip->mh); eri_savecntrs(erip); switch (stat) { case MAC_STAT_IFSPEED: *val = esp->ifspeed * 1000000ULL; break; case MAC_STAT_MULTIRCV: *val = esp->multircv; break; case MAC_STAT_BRDCSTRCV: *val = esp->brdcstrcv; break; case MAC_STAT_IPACKETS: *val = esp->ipackets64; break; case MAC_STAT_RBYTES: *val = esp->rbytes64; break; case MAC_STAT_OBYTES: *val = esp->obytes64; break; case MAC_STAT_OPACKETS: *val = esp->opackets64; break; case MAC_STAT_IERRORS: *val = esp->ierrors; break; case MAC_STAT_OERRORS: *val = esp->oerrors; break; case MAC_STAT_MULTIXMT: *val = esp->multixmt; break; case MAC_STAT_BRDCSTXMT: *val = esp->brdcstxmt; break; case MAC_STAT_NORCVBUF: *val = esp->norcvbuf; break; case MAC_STAT_NOXMTBUF: *val = esp->noxmtbuf; break; case MAC_STAT_UNDERFLOWS: *val = esp->txmac_urun; break; case MAC_STAT_OVERFLOWS: *val = esp->rx_overflow; break; case MAC_STAT_COLLISIONS: *val = esp->collisions; break; case ETHER_STAT_ALIGN_ERRORS: *val = esp->rx_align_err; break; case ETHER_STAT_FCS_ERRORS: *val = esp->rx_crc_err; break; case ETHER_STAT_EX_COLLISIONS: *val = esp->excessive_coll; break; case ETHER_STAT_TX_LATE_COLLISIONS: *val = esp->late_coll; break; case ETHER_STAT_FIRST_COLLISIONS: *val = esp->first_coll; break; case ETHER_STAT_LINK_DUPLEX: *val = esp->link_duplex; break; case ETHER_STAT_TOOLONG_ERRORS: *val = esp->rx_toolong_pkts; break; case ETHER_STAT_TOOSHORT_ERRORS: *val = esp->rx_runt; break; case ETHER_STAT_XCVR_ADDR: *val = erip->phyad; break; case ETHER_STAT_XCVR_INUSE: *val = XCVR_100X; /* should always be 100X for now */ break; case ETHER_STAT_CAP_100FDX: *val = param_bmsr_100fdx; break; case ETHER_STAT_CAP_100HDX: *val = param_bmsr_100hdx; break; case ETHER_STAT_CAP_10FDX: *val = param_bmsr_10fdx; break; case ETHER_STAT_CAP_10HDX: *val = param_bmsr_10hdx; break; case ETHER_STAT_CAP_AUTONEG: *val = param_bmsr_ancap; break; case ETHER_STAT_CAP_ASMPAUSE: *val = param_bmsr_asm_dir; break; case ETHER_STAT_CAP_PAUSE: *val = param_bmsr_pause; break; case ETHER_STAT_ADV_CAP_100FDX: *val = param_anar_100fdx; break; case ETHER_STAT_ADV_CAP_100HDX: *val = param_anar_100hdx; break; case ETHER_STAT_ADV_CAP_10FDX: *val = param_anar_10fdx; break; case ETHER_STAT_ADV_CAP_10HDX: *val = param_anar_10hdx; break; case ETHER_STAT_ADV_CAP_AUTONEG: *val = param_autoneg; break; case ETHER_STAT_ADV_CAP_ASMPAUSE: *val = param_anar_asm_dir; break; case ETHER_STAT_ADV_CAP_PAUSE: *val = param_anar_pause; break; case ETHER_STAT_LP_CAP_100FDX: *val = param_anlpar_100fdx; break; case ETHER_STAT_LP_CAP_100HDX: *val = param_anlpar_100hdx; break; case ETHER_STAT_LP_CAP_10FDX: *val = param_anlpar_10fdx; break; case ETHER_STAT_LP_CAP_10HDX: *val = param_anlpar_10hdx; break; case ETHER_STAT_LP_CAP_AUTONEG: *val = param_aner_lpancap; break; case ETHER_STAT_LP_CAP_ASMPAUSE: *val = param_anlpar_pauseTX; break; case ETHER_STAT_LP_CAP_PAUSE: *val = param_anlpar_pauseRX; break; case ETHER_STAT_LINK_PAUSE: *val = esp->pausing; break; case ETHER_STAT_LINK_ASMPAUSE: *val = param_anar_asm_dir && param_anlpar_pauseTX && (param_anar_pause != param_anlpar_pauseRX); break; case ETHER_STAT_LINK_AUTONEG: *val = param_autoneg && param_aner_lpancap; break; } return (0); } /* * Hardware Functions * New Section */ /* * Initialize the MAC registers. Some of of the MAC registers are initialized * just once since Global Reset or MAC reset doesn't clear them. Others (like * Host MAC Address Registers) are cleared on every reset and have to be * reinitialized. */ static void eri_init_macregs_generic(struct eri *erip) { /* * set up the MAC parameter registers once * after power cycle. SUSPEND/RESUME also requires * setting these registers. */ if ((erip->stats.inits == 1) || (erip->init_macregs)) { erip->init_macregs = 0; PUT_MACREG(ipg0, param_ipg0); PUT_MACREG(ipg1, param_ipg1); PUT_MACREG(ipg2, param_ipg2); PUT_MACREG(macmin, BMAC_MIN_FRAME_SIZE); #ifdef ERI_RX_TAG_ERROR_WORKAROUND PUT_MACREG(macmax, BMAC_MAX_FRAME_SIZE_TAG | BMAC_MAX_BURST); #else PUT_MACREG(macmax, BMAC_MAX_FRAME_SIZE | BMAC_MAX_BURST); #endif PUT_MACREG(palen, BMAC_PREAMBLE_SIZE); PUT_MACREG(jam, BMAC_JAM_SIZE); PUT_MACREG(alimit, BMAC_ATTEMPT_LIMIT); PUT_MACREG(macctl_type, BMAC_CONTROL_TYPE); PUT_MACREG(rseed, ((erip->ouraddr[0] & 0x3) << 8) | erip->ouraddr[1]); PUT_MACREG(madd3, BMAC_ADDRESS_3); PUT_MACREG(madd4, BMAC_ADDRESS_4); PUT_MACREG(madd5, BMAC_ADDRESS_5); /* Program MAC Control address */ PUT_MACREG(madd6, BMAC_ADDRESS_6); PUT_MACREG(madd7, BMAC_ADDRESS_7); PUT_MACREG(madd8, BMAC_ADDRESS_8); PUT_MACREG(afr0, BMAC_AF_0); PUT_MACREG(afr1, BMAC_AF_1); PUT_MACREG(afr2, BMAC_AF_2); PUT_MACREG(afmr1_2, BMAC_AF21_MASK); PUT_MACREG(afmr0, BMAC_AF0_MASK); } /* The counters need to be zeroed */ PUT_MACREG(nccnt, 0); PUT_MACREG(fccnt, 0); PUT_MACREG(excnt, 0); PUT_MACREG(ltcnt, 0); PUT_MACREG(dcnt, 0); PUT_MACREG(frcnt, 0); PUT_MACREG(lecnt, 0); PUT_MACREG(aecnt, 0); PUT_MACREG(fecnt, 0); PUT_MACREG(rxcv, 0); if (erip->pauseTX) PUT_MACREG(spcmd, BMAC_SEND_PAUSE_CMD); else PUT_MACREG(spcmd, 0); /* * Program BigMAC with local individual ethernet address. */ PUT_MACREG(madd0, (erip->ouraddr[4] << 8) | erip->ouraddr[5]); PUT_MACREG(madd1, (erip->ouraddr[2] << 8) | erip->ouraddr[3]); PUT_MACREG(madd2, (erip->ouraddr[0] << 8) | erip->ouraddr[1]); /* * Install multicast address filter. */ PUT_MACREG(hash0, erip->ladrf[0]); PUT_MACREG(hash1, erip->ladrf[1]); PUT_MACREG(hash2, erip->ladrf[2]); PUT_MACREG(hash3, erip->ladrf[3]); PUT_MACREG(hash4, erip->ladrf[4]); PUT_MACREG(hash5, erip->ladrf[5]); PUT_MACREG(hash6, erip->ladrf[6]); PUT_MACREG(hash7, erip->ladrf[7]); PUT_MACREG(hash8, erip->ladrf[8]); PUT_MACREG(hash9, erip->ladrf[9]); PUT_MACREG(hash10, erip->ladrf[10]); PUT_MACREG(hash11, erip->ladrf[11]); PUT_MACREG(hash12, erip->ladrf[12]); PUT_MACREG(hash13, erip->ladrf[13]); PUT_MACREG(hash14, erip->ladrf[14]); } static int eri_flush_rxbufs(struct eri *erip) { uint_t i; int status = 0; /* * Free and dvma_unload pending recv buffers. * Maintaining the 1-to-1 ordered sequence of * dvma_load() followed by dvma_unload() is critical. * Always unload anything before loading it again. * Never unload anything twice. Always unload * before freeing the buffer. We satisfy these * requirements by unloading only those descriptors * which currently have an mblk associated with them. */ for (i = 0; i < ERI_RPENDING; i++) { if (erip->rmblkp[i]) { if (erip->eri_dvmarh) dvma_unload(erip->eri_dvmarh, 2 * i, DDI_DMA_SYNC_FORCPU); else if ((ddi_dma_unbind_handle(erip->ndmarh[i]) == DDI_FAILURE)) status = -1; freeb(erip->rmblkp[i]); erip->rmblkp[i] = NULL; } } return (status); } static void eri_init_txbufs(struct eri *erip) { /* * Clear TX descriptors. */ bzero((caddr_t)erip->eri_tmdp, ERI_TPENDING * sizeof (struct eri_tmd)); /* * sync TXDMA descriptors. */ ERI_SYNCIOPB(erip, erip->eri_tmdp, (ERI_TPENDING * sizeof (struct eri_tmd)), DDI_DMA_SYNC_FORDEV); /* * Reset TMD 'walking' pointers. */ erip->tcurp = erip->eri_tmdp; erip->tnextp = erip->eri_tmdp; erip->tx_cur_cnt = 0; erip->tx_kick = 0; erip->tx_completion = 0; } static int eri_init_rxbufs(struct eri *erip) { ddi_dma_cookie_t dma_cookie; mblk_t *bp; int i, status = 0; uint32_t ccnt; /* * clear rcv descriptors */ bzero((caddr_t)erip->rmdp, ERI_RPENDING * sizeof (struct rmd)); for (i = 0; i < ERI_RPENDING; i++) { if ((bp = eri_allocb(ERI_BUFSIZE)) == NULL) { status = -1; continue; } /* Load data buffer to DVMA space */ if (erip->eri_dvmarh) dvma_kaddr_load(erip->eri_dvmarh, (caddr_t)bp->b_rptr, ERI_BUFSIZE, 2 * i, &dma_cookie); /* * Bind data buffer to DMA handle */ else if (ddi_dma_addr_bind_handle(erip->ndmarh[i], NULL, (caddr_t)bp->b_rptr, ERI_BUFSIZE, DDI_DMA_READ | DDI_DMA_CONSISTENT, DDI_DMA_DONTWAIT, 0, &dma_cookie, &ccnt) != DDI_DMA_MAPPED) status = -1; PUT_RMD((&erip->rmdp[i]), dma_cookie); erip->rmblkp[i] = bp; /* save for later use */ } /* * sync RXDMA descriptors. */ ERI_SYNCIOPB(erip, erip->rmdp, (ERI_RPENDING * sizeof (struct rmd)), DDI_DMA_SYNC_FORDEV); /* * Reset RMD 'walking' pointers. */ erip->rnextp = erip->rmdp; erip->rx_completion = 0; erip->rx_kick = ERI_RPENDING - 4; return (status); } static uint32_t eri_txmac_disable(struct eri *erip) { int n; PUT_MACREG(txcfg, GET_MACREG(txcfg) & ~BMAC_TXCFG_ENAB); n = (BMACTXRSTDELAY * 10) / ERI_WAITPERIOD; while (--n > 0) { drv_usecwait(ERI_WAITPERIOD); if ((GET_MACREG(txcfg) & 1) == 0) return (0); } return (1); } static uint32_t eri_rxmac_disable(struct eri *erip) { int n; PUT_MACREG(rxcfg, GET_MACREG(rxcfg) & ~BMAC_RXCFG_ENAB); n = BMACRXRSTDELAY / ERI_WAITPERIOD; while (--n > 0) { drv_usecwait(ERI_WAITPERIOD); if ((GET_MACREG(rxcfg) & 1) == 0) return (0); } return (1); } /* * Return 0 upon success, 1 on failure. */ static int eri_stop(struct eri *erip) { (void) eri_erx_reset(erip); (void) eri_etx_reset(erip); /* * set up cache line to 16 for 64 bytes of pci burst size */ PUT_SWRSTREG(reset, ERI_G_RESET_GLOBAL | ERI_CACHE_LINE_SIZE); if (erip->linkcheck) { erip->linkcheck = 0; erip->global_reset_issued = 2; } else { param_linkup = 0; erip->stats.link_up = LINK_STATE_DOWN; erip->stats.link_duplex = LINK_DUPLEX_UNKNOWN; erip->global_reset_issued = -1; } ERI_DELAY((GET_SWRSTREG(reset) == ERI_CACHE_LINE_SIZE), ERI_MAX_RST_DELAY); erip->rx_reset_issued = -1; erip->tx_reset_issued = -1; /* * workaround for RIO not resetting the interrupt mask * register to default value 0xffffffff. */ PUT_GLOBREG(intmask, ERI_G_MASK_ALL); if (GET_SWRSTREG(reset) == ERI_CACHE_LINE_SIZE) { return (0); } else { return (1); } } /* * Reset Just the RX Portion * Return 0 upon success, 1 on failure. * * Resetting the rxdma while there is a rx dma transaction going on the * bus, will cause bus hang or parity errors. To avoid this, we would first * disable the rxdma by clearing the ENABLE bit (bit 0). To make sure it is * disabled, we will poll it until it realy clears. Furthermore, to verify * any RX DMA activity is subsided, we delay for 5 msec. */ static uint32_t eri_erx_reset(struct eri *erip) { (void) eri_rxmac_disable(erip); /* Disable the RX MAC */ /* Disable the RX DMA */ PUT_ERXREG(config, GET_ERXREG(config) & ~GET_CONFIG_RXDMA_EN); ERI_DELAY(((GET_ERXREG(config) & 1) == 0), ERI_MAX_RST_DELAY); if ((GET_ERXREG(config) & 1) != 0) ERI_FAULT_MSG1(erip, SEVERITY_LOW, ERI_VERB_MSG, disable_erx_msg); drv_usecwait(5000); /* Delay to insure no RX DMA activity */ PUT_SWRSTREG(reset, ERI_G_RESET_ERX | ERI_CACHE_LINE_SIZE); /* * Wait until the reset is completed which is indicated by * the reset bit cleared or time out.. */ ERI_DELAY(((GET_SWRSTREG(reset) & (ERI_G_RESET_ERX)) == ERI_CACHE_LINE_SIZE), ERI_MAX_RST_DELAY); erip->rx_reset_issued = -1; return ((GET_SWRSTREG(reset) & (ERI_G_RESET_ERX)) ? 1 : 0); } /* * Reset Just the TX Portion * Return 0 upon success, 1 on failure. * Resetting the txdma while there is a tx dma transaction on the bus, may cause * bus hang or parity errors. To avoid this we would first disable the txdma by * clearing the ENABLE bit (bit 0). To make sure it is disabled, we will poll * it until it realy clears. Furthermore, to any TX DMA activity is subsided, * we delay for 1 msec. */ static uint32_t eri_etx_reset(struct eri *erip) { (void) eri_txmac_disable(erip); /* Disable the TX DMA */ PUT_ETXREG(config, GET_ETXREG(config) & ~GET_CONFIG_TXDMA_EN); #ifdef ORIG ERI_DELAY(((GET_ETXREG(config) & 1) == 0), ERI_MAX_RST_DELAY); if ((GET_ETXREG(config) & 1) != 0) ERI_FAULT_MSG1(erip, SEVERITY_LOW, ERI_VERB_MSG, disable_etx_msg); drv_usecwait(5000); /* Delay to ensure DMA completed (if any). */ #endif drv_usecwait(5000); /* Delay to ensure DMA completed (if any). */ ERI_DELAY(((GET_ETXREG(config) & 1) == 0), ERI_MAX_RST_DELAY); if ((GET_ETXREG(config) & 1) != 0) ERI_FAULT_MSG1(erip, SEVERITY_LOW, ERI_VERB_MSG, disable_etx_msg); PUT_SWRSTREG(reset, ERI_G_RESET_ETX | ERI_CACHE_LINE_SIZE); /* * Wait until the reset is completed which is indicated by the reset bit * cleared or time out.. */ ERI_DELAY(((GET_SWRSTREG(reset) & (ERI_G_RESET_ETX)) == ERI_CACHE_LINE_SIZE), ERI_MAX_RST_DELAY); erip->tx_reset_issued = -1; if (GET_SWRSTREG(reset) & (ERI_G_RESET_ETX)) { return (1); } else return (0); } /* * Initialize the TX DMA registers and Enable the TX DMA. */ static uint32_t eri_init_txregs(struct eri *erip) { uint32_t i; uint64_t tx_ring; /* * Initialize ETX Registers: * config, txring_lo, txring_hi */ tx_ring = ERI_IOPBIOADDR(erip, erip->eri_tmdp); PUT_ETXREG(txring_lo, (uint32_t)(tx_ring)); PUT_ETXREG(txring_hi, (uint32_t)(tx_ring >> 32)); /* * Get TX Ring Size Masks. * The ring size ERI_TPENDING is defined in eri_mac.h. */ switch (ERI_TPENDING) { case 32: i = ETX_RINGSZ_32; break; case 64: i = ETX_RINGSZ_64; break; case 128: i = ETX_RINGSZ_128; break; case 256: i = ETX_RINGSZ_256; break; case 512: i = ETX_RINGSZ_512; break; case 1024: i = ETX_RINGSZ_1024; break; case 2048: i = ETX_RINGSZ_2048; break; case 4096: i = ETX_RINGSZ_4096; break; default: ERI_FAULT_MSG2(erip, SEVERITY_HIGH, ERI_VERB_MSG, unk_tx_descr_sze_msg, ERI_TPENDING); return (1); } i <<= ERI_TX_RINGSZ_SHIFT; PUT_ETXREG(config, ETX_CONFIG_THRESHOLD | i); ENABLE_TXDMA(erip); ENABLE_MAC(erip); return (0); } /* * Initialize the RX DMA registers and Enable the RX DMA. */ static uint32_t eri_init_rxregs(struct eri *erip) { int i; uint64_t rx_ring; /* * Initialize ERX Registers: * rxring_lo, rxring_hi, config, rx_blanking, rx_pause_threshold. * Also, rx_kick * Read and save rxfifo_size. * XXX: Use this to properly configure PAUSE threshold values. */ rx_ring = ERI_IOPBIOADDR(erip, erip->rmdp); PUT_ERXREG(rxring_lo, (uint32_t)(rx_ring)); PUT_ERXREG(rxring_hi, (uint32_t)(rx_ring >> 32)); PUT_ERXREG(rx_kick, erip->rx_kick); /* * The Max ring size, ERI_RMDMAX is defined in eri_mac.h. * More ERI_RPENDING will provide better performance but requires more * system DVMA memory. * eri_rx_ring_size can be used to tune this value from /etc/system * eri_rx_ring_size cannot be NDD'able due to non-recoverable errors * which cannot be detected from NDD operations */ /* * get the rxring size bits */ switch (ERI_RPENDING) { case 32: i = ERX_RINGSZ_32; break; case 64: i = ERX_RINGSZ_64; break; case 128: i = ERX_RINGSZ_128; break; case 256: i = ERX_RINGSZ_256; break; case 512: i = ERX_RINGSZ_512; break; case 1024: i = ERX_RINGSZ_1024; break; case 2048: i = ERX_RINGSZ_2048; break; case 4096: i = ERX_RINGSZ_4096; break; default: ERI_FAULT_MSG2(erip, SEVERITY_HIGH, ERI_VERB_MSG, unk_rx_descr_sze_msg, ERI_RPENDING); return (1); } i <<= ERI_RX_RINGSZ_SHIFT; i |= (ERI_FSTBYTE_OFFSET << ERI_RX_CONFIG_FBO_SHIFT) | (ETHERHEADER_SIZE << ERI_RX_CONFIG_RX_CSSTART_SHIFT) | (ERI_RX_FIFOTH_1024 << ERI_RX_CONFIG_RXFIFOTH_SHIFT); PUT_ERXREG(config, i); PUT_ERXREG(rx_blanking, (param_intr_blank_time << ERI_RX_BLNK_INTR_TIME_SHIFT) | param_intr_blank_packets); PUT_ERXREG(rx_pause_threshold, rx_pause_threshold); erip->rxfifo_size = GET_ERXREG(rxfifo_size); ENABLE_RXDMA(erip); return (0); } static int eri_freebufs(struct eri *erip) { int status = 0; status = eri_flush_rxbufs(erip); return (status); } static void eri_update_rxbufs(struct eri *erip) { int i; volatile struct rmd *rmdp, *rmdpbase; /* * Hang out receive buffers. */ rmdpbase = erip->rmdp; for (i = 0; i < ERI_RPENDING; i++) { rmdp = rmdpbase + i; UPDATE_RMD(rmdp); } /* * sync RXDMA descriptors. */ ERI_SYNCIOPB(erip, erip->rmdp, (ERI_RPENDING * sizeof (struct rmd)), DDI_DMA_SYNC_FORDEV); /* * Reset RMD 'walking' pointers. */ erip->rnextp = erip->rmdp; erip->rx_completion = 0; erip->rx_kick = ERI_RPENDING - 4; } /* * This routine is used to reset the RX DMA only. In the case of RX * failures such as RX Tag Error, RX hang etc... we don't want to * do global reset which takes down the link and clears the FIFO's * By doing RX only reset, we leave the TX and the link intact. */ static uint32_t eri_init_rx_channel(struct eri *erip) { erip->flags &= ~ERI_RXINIT; (void) eri_erx_reset(erip); eri_update_rxbufs(erip); if (eri_init_rxregs(erip)) return (1); PUT_MACREG(rxmask, BMAC_RXINTR_MASK); PUT_MACREG(rxcfg, GET_MACREG(rxcfg) | BMAC_RXCFG_ENAB); erip->rx_reset_issued = 0; HSTAT(erip, rx_inits); erip->flags |= ERI_RXINIT; return (0); } static void eri_init_rx(struct eri *erip) { uint16_t *ladrf; /* * First of all make sure the Receive MAC is stop. */ (void) eri_rxmac_disable(erip); /* Disable the RX MAC */ /* * Program BigMAC with local individual ethernet address. */ PUT_MACREG(madd0, (erip->ouraddr[4] << 8) | erip->ouraddr[5]); PUT_MACREG(madd1, (erip->ouraddr[2] << 8) | erip->ouraddr[3]); PUT_MACREG(madd2, (erip->ouraddr[0] << 8) | erip->ouraddr[1]); /* * Set up multicast address filter by passing all multicast * addresses through a crc generator, and then using the * low order 8 bits as a index into the 256 bit logical * address filter. The high order four bits select the word, * while the rest of the bits select the bit within the word. */ ladrf = erip->ladrf; PUT_MACREG(hash0, ladrf[0]); PUT_MACREG(hash1, ladrf[1]); PUT_MACREG(hash2, ladrf[2]); PUT_MACREG(hash3, ladrf[3]); PUT_MACREG(hash4, ladrf[4]); PUT_MACREG(hash5, ladrf[5]); PUT_MACREG(hash6, ladrf[6]); PUT_MACREG(hash7, ladrf[7]); PUT_MACREG(hash8, ladrf[8]); PUT_MACREG(hash9, ladrf[9]); PUT_MACREG(hash10, ladrf[10]); PUT_MACREG(hash11, ladrf[11]); PUT_MACREG(hash12, ladrf[12]); PUT_MACREG(hash13, ladrf[13]); PUT_MACREG(hash14, ladrf[14]); PUT_MACREG(hash15, ladrf[15]); #ifdef ERI_DONT_STRIP_CRC PUT_MACREG(rxcfg, ((erip->promisc ? BMAC_RXCFG_PROMIS : 0) | (erip->multi_refcnt ? BMAC_RXCFG_HASH : 0) | BMAC_RXCFG_ENAB)); #else PUT_MACREG(rxcfg, ((erip->promisc ? BMAC_RXCFG_PROMIS : 0) | (erip->multi_refcnt ? BMAC_RXCFG_HASH : 0) | BMAC_RXCFG_ENAB | BMAC_RXCFG_STRIP_CRC)); #endif /* wait after setting Hash Enable bit */ /* drv_usecwait(10); */ HSTAT(erip, rx_inits); } /* * This routine is used to init the TX MAC only. * &erip->xmitlock is held before calling this routine. */ void eri_init_txmac(struct eri *erip) { uint32_t carrier_ext = 0; erip->flags &= ~ERI_TXINIT; /* * Stop the Transmit MAC. */ (void) eri_txmac_disable(erip); /* * Must be Internal Transceiver */ if (param_mode) PUT_MACREG(xifc, ((param_transceiver == EXTERNAL_XCVR ? BMAC_XIFC_MIIBUF_OE : 0) | BMAC_XIFC_TX_MII_OE)); else PUT_MACREG(xifc, ((param_transceiver == EXTERNAL_XCVR ? BMAC_XIFC_MIIBUF_OE : 0) | BMAC_XIFC_TX_MII_OE | BMAC_XIFC_DIS_ECHO)); /* * Initialize the interpacket gap registers */ PUT_MACREG(ipg1, param_ipg1); PUT_MACREG(ipg2, param_ipg2); if (erip->ngu_enable) PUT_MACREG(txcfg, ((param_mode ? BMAC_TXCFG_FDX: 0) | ((param_lance_mode && (erip->lance_mode_enable)) ? BMAC_TXCFG_ENIPG0 : 0) | (carrier_ext ? BMAC_TXCFG_CARR_EXT : 0) | BMAC_TXCFG_NGU)); else PUT_MACREG(txcfg, ((param_mode ? BMAC_TXCFG_FDX: 0) | ((param_lance_mode && (erip->lance_mode_enable)) ? BMAC_TXCFG_ENIPG0 : 0) | (carrier_ext ? BMAC_TXCFG_CARR_EXT : 0))); ENABLE_TXDMA(erip); ENABLE_TXMAC(erip); HSTAT(erip, tx_inits); erip->flags |= ERI_TXINIT; } static void eri_unallocthings(struct eri *erip) { uint32_t flag; uint32_t i; flag = erip->alloc_flag; if (flag & ERI_DESC_MEM_MAP) (void) ddi_dma_unbind_handle(erip->md_h); if (flag & ERI_DESC_MEM_ALLOC) { ddi_dma_mem_free(&erip->mdm_h); erip->rmdp = NULL; erip->eri_tmdp = NULL; } if (flag & ERI_DESC_HANDLE_ALLOC) ddi_dma_free_handle(&erip->md_h); (void) eri_freebufs(erip); if (flag & ERI_RCV_HANDLE_ALLOC) for (i = 0; i < erip->rcv_handle_cnt; i++) ddi_dma_free_handle(&erip->ndmarh[i]); if (flag & ERI_RCV_DVMA_ALLOC) { (void) dvma_release(erip->eri_dvmarh); erip->eri_dvmarh = NULL; } if (flag & ERI_XBUFS_KMEM_DMABIND) { (void) ddi_dma_unbind_handle(erip->tbuf_handle); erip->tbuf_ioaddr = 0; } if (flag & ERI_XBUFS_KMEM_ALLOC) { ddi_dma_mem_free(&erip->tbuf_acch); erip->tbuf_kaddr = NULL; } if (flag & ERI_XBUFS_HANDLE_ALLOC) { ddi_dma_free_handle(&erip->tbuf_handle); erip->tbuf_handle = NULL; } } /* * Initialize channel. * Return true on success, false on error. * * The recommended sequence for initialization is: * 1. Issue a Global Reset command to the Ethernet Channel. * 2. Poll the Global_Reset bits until the execution of the reset has been * completed. * 2(a). Use the MIF Frame/Output register to reset the transceiver. * Poll Register 0 to till the Resetbit is 0. * 2(b). Use the MIF Frame/Output register to set the PHY in in Normal-Op, * 100Mbps and Non-Isolated mode. The main point here is to bring the * PHY out of Isolate mode so that it can generate the rx_clk and tx_clk * to the MII interface so that the Bigmac core can correctly reset * upon a software reset. * 2(c). Issue another Global Reset command to the Ethernet Channel and poll * the Global_Reset bits till completion. * 3. Set up all the data structures in the host memory. * 4. Program the TX_MAC registers/counters (excluding the TX_MAC Configuration * Register). * 5. Program the RX_MAC registers/counters (excluding the RX_MAC Configuration * Register). * 6. Program the Transmit Descriptor Ring Base Address in the ETX. * 7. Program the Receive Descriptor Ring Base Address in the ERX. * 8. Program the Global Configuration and the Global Interrupt Mask Registers. * 9. Program the ETX Configuration register (enable the Transmit DMA channel). * 10. Program the ERX Configuration register (enable the Receive DMA channel). * 11. Program the XIF Configuration Register (enable the XIF). * 12. Program the RX_MAC Configuration Register (Enable the RX_MAC). * 13. Program the TX_MAC Configuration Register (Enable the TX_MAC). */ /* * lock order: * intrlock->linklock->xmitlock->xcvrlock */ static boolean_t eri_init(struct eri *erip) { uint32_t init_stat = 0; uint32_t partial_init = 0; uint32_t carrier_ext = 0; uint32_t mac_ctl = 0; boolean_t ret; uint32_t link_timeout = ERI_LINKCHECK_TIMER; link_state_t linkupdate = LINK_STATE_UNKNOWN; /* * Just return successfully if device is suspended. * eri_init() will be called again from resume. */ ASSERT(erip != NULL); if (erip->flags & ERI_SUSPENDED) { ret = B_TRUE; goto init_exit; } mutex_enter(&erip->intrlock); eri_stop_timer(erip); /* acquire linklock */ mutex_enter(&erip->xmitlock); erip->flags &= (ERI_DLPI_LINKUP | ERI_STARTED); erip->wantw = B_FALSE; HSTAT(erip, inits); erip->txhung = 0; if ((erip->stats.inits > 1) && (erip->init_macregs == 0)) eri_savecntrs(erip); mutex_enter(&erip->xcvrlock); if (!param_linkup || erip->linkcheck) { if (!erip->linkcheck) linkupdate = LINK_STATE_DOWN; (void) eri_stop(erip); } if (!(erip->flags & ERI_DLPI_LINKUP) || !param_linkup) { erip->flags |= ERI_DLPI_LINKUP; eri_mif_poll(erip, MIF_POLL_STOP); (void) eri_new_xcvr(erip); ERI_DEBUG_MSG1(erip, XCVR_MSG, "New transceiver detected."); if (param_transceiver != NO_XCVR) { /* * Reset the new PHY and bring up the * link */ if (eri_reset_xcvr(erip)) { ERI_FAULT_MSG1(erip, SEVERITY_NONE, ERI_VERB_MSG, "In Init after reset"); mutex_exit(&erip->xcvrlock); link_timeout = 0; goto done; } if (erip->stats.link_up == LINK_STATE_UP) linkupdate = LINK_STATE_UP; } else { erip->flags |= (ERI_RUNNING | ERI_INITIALIZED); param_linkup = 0; erip->stats.link_up = LINK_STATE_DOWN; erip->stats.link_duplex = LINK_DUPLEX_UNKNOWN; linkupdate = LINK_STATE_DOWN; /* * Still go on and complete the MAC initialization as * xcvr might show up later. * you must return to their mutex ordering. */ } eri_mif_poll(erip, MIF_POLL_START); } mutex_exit(&erip->xcvrlock); /* * Allocate data structures. */ if (erip->global_reset_issued) { if (erip->global_reset_issued == 2) { /* fast path */ /* * Hang out/Initialize descriptors and buffers. */ eri_init_txbufs(erip); eri_update_rxbufs(erip); } else { init_stat = eri_allocthings(erip); if (init_stat) goto done; if (eri_freebufs(erip)) goto done; /* * Hang out/Initialize descriptors and buffers. */ eri_init_txbufs(erip); if (eri_init_rxbufs(erip)) goto done; } } /* * BigMAC requires that we confirm that tx, rx and hash are in * quiescent state. * MAC will not reset successfully if the transceiver is not reset and * brought out of Isolate mode correctly. TXMAC reset may fail if the * ext. transceiver is just disconnected. If it fails, try again by * checking the transceiver. */ if (eri_txmac_disable(erip)) { ERI_FAULT_MSG1(erip, SEVERITY_LOW, ERI_VERB_MSG, disable_txmac_msg); param_linkup = 0; /* force init again */ erip->stats.link_up = LINK_STATE_DOWN; erip->stats.link_duplex = LINK_DUPLEX_UNKNOWN; linkupdate = LINK_STATE_DOWN; goto done; } if (eri_rxmac_disable(erip)) { ERI_FAULT_MSG1(erip, SEVERITY_LOW, ERI_VERB_MSG, disable_rxmac_msg); param_linkup = 0; /* force init again */ erip->stats.link_up = LINK_STATE_DOWN; erip->stats.link_duplex = LINK_DUPLEX_UNKNOWN; linkupdate = LINK_STATE_DOWN; goto done; } eri_init_macregs_generic(erip); /* * Initialize ERI Global registers : * config * For PCI : err_mask, bif_cfg * * Use user-configurable parameter for enabling 64-bit transfers. * Note:For PCI, burst sizes are in multiples of 64-bytes. */ /* * Significant performance improvements can be achieved by * disabling transmit interrupt. Thus TMD's are reclaimed * only very infrequently. * The PCS Interrupt is masked here. It is enabled only when * a PCS link is brought up because there is no second level * mask for this interrupt.. * Init GLOBAL, TXMAC, RXMAC and MACCTL interrupt masks here. */ if (! partial_init) { PUT_GLOBREG(intmask, ERI_G_MASK_INTR); erip->tx_int_me = 0; PUT_MACREG(txmask, BMAC_TXINTR_MASK); PUT_MACREG(rxmask, BMAC_RXINTR_MASK); PUT_MACREG(macctl_mask, ERI_MACCTL_INTR_MASK); } if (erip->global_reset_issued) { /* * Initialize ETX Registers: * config, txring_lo, txring_hi */ if (eri_init_txregs(erip)) goto done; /* * Initialize ERX Registers: * rxring_lo, rxring_hi, config, rx_blanking, * rx_pause_threshold. Also, rx_kick * Read and save rxfifo_size. */ if (eri_init_rxregs(erip)) goto done; } PUT_MACREG(macctl_mask, ERI_MACCTL_INTR_MASK); /* * Set up the slottime,and rxconfig, txconfig without enabling * the latter two at this time */ PUT_MACREG(slot, BMAC_SLOT_TIME); carrier_ext = 0; #ifdef ERI_DONT_STRIP_CRC PUT_MACREG(rxcfg, ((erip->promisc ? BMAC_RXCFG_PROMIS : 0) | (erip->multi_refcnt ? BMAC_RXCFG_HASH : 0) | (carrier_ext ? BMAC_RXCFG_CARR_EXT : 0))); #else PUT_MACREG(rxcfg, ((erip->promisc ? BMAC_RXCFG_PROMIS : 0) | (erip->multi_refcnt ? BMAC_RXCFG_HASH : 0) | BMAC_RXCFG_STRIP_CRC | (carrier_ext ? BMAC_RXCFG_CARR_EXT : 0))); #endif drv_usecwait(10); /* wait after setting Hash Enable bit */ if (erip->ngu_enable) PUT_MACREG(txcfg, ((param_mode ? BMAC_TXCFG_FDX: 0) | ((param_lance_mode && (erip->lance_mode_enable)) ? BMAC_TXCFG_ENIPG0 : 0) | (carrier_ext ? BMAC_TXCFG_CARR_EXT : 0) | BMAC_TXCFG_NGU)); else PUT_MACREG(txcfg, ((param_mode ? BMAC_TXCFG_FDX: 0) | ((param_lance_mode && (erip->lance_mode_enable)) ? BMAC_TXCFG_ENIPG0 : 0) | (carrier_ext ? BMAC_TXCFG_CARR_EXT : 0))); if (erip->pauseRX) mac_ctl = ERI_MCTLCFG_RXPAUSE; if (erip->pauseTX) mac_ctl |= ERI_MCTLCFG_TXPAUSE; PUT_MACREG(macctl_cfg, mac_ctl); /* * Must be Internal Transceiver */ if (param_mode) PUT_MACREG(xifc, ((param_transceiver == EXTERNAL_XCVR ? BMAC_XIFC_MIIBUF_OE : 0) | BMAC_XIFC_TX_MII_OE)); else { PUT_MACREG(xifc, ((param_transceiver == EXTERNAL_XCVR ? BMAC_XIFC_MIIBUF_OE : 0) | BMAC_XIFC_TX_MII_OE | BMAC_XIFC_DIS_ECHO)); link_timeout = ERI_CHECK_HANG_TIMER; } /* * if MAC int loopback flag is set, put xifc reg in mii loopback * mode {DIAG} */ if (erip->flags & ERI_MACLOOPBACK) { PUT_MACREG(xifc, GET_MACREG(xifc) | BMAC_XIFC_MIILPBK); } /* * Enable TX and RX MACs. */ ENABLE_MAC(erip); erip->flags |= (ERI_RUNNING | ERI_INITIALIZED | ERI_TXINIT | ERI_RXINIT); mac_tx_update(erip->mh); erip->global_reset_issued = 0; #ifdef ERI_10_10_FORCE_SPEED_WORKAROUND eri_xcvr_force_mode(erip, &link_timeout); #endif done: if (init_stat) eri_unallocthings(erip); mutex_exit(&erip->xmitlock); eri_start_timer(erip, eri_check_link, link_timeout); mutex_exit(&erip->intrlock); if (linkupdate != LINK_STATE_UNKNOWN) mac_link_update(erip->mh, linkupdate); ret = (erip->flags & ERI_RUNNING) ? B_TRUE : B_FALSE; if (!ret) { ERI_FAULT_MSG1(erip, SEVERITY_NONE, ERI_VERB_MSG, "eri_init failed"); } init_exit: ASSERT(!MUTEX_HELD(&erip->linklock)); return (ret); } /* * 0 as burstsize upon failure as it signifies no burst size. */ static int eri_burstsize(struct eri *erip) { ddi_dma_handle_t handle; if (ddi_dma_alloc_handle(erip->dip, &dma_attr, DDI_DMA_DONTWAIT, NULL, &handle)) return (DDI_FAILURE); erip->burstsizes = ddi_dma_burstsizes(handle); ddi_dma_free_handle(&handle); if (erip->burstsizes) return (DDI_SUCCESS); return (DDI_FAILURE); } /* * Un-initialize (STOP) ERI channel. */ static void eri_uninit(struct eri *erip) { boolean_t needind; /* * Allow up to 'ERI_DRAINTIME' for pending xmit's to complete. */ ERI_DELAY((erip->tcurp == erip->tnextp), ERI_DRAINTIME); mutex_enter(&erip->intrlock); eri_stop_timer(erip); /* acquire linklock */ mutex_enter(&erip->xmitlock); mutex_enter(&erip->xcvrlock); eri_mif_poll(erip, MIF_POLL_STOP); erip->flags &= ~ERI_DLPI_LINKUP; mutex_exit(&erip->xcvrlock); needind = !erip->linkcheck; (void) eri_stop(erip); erip->flags &= ~ERI_RUNNING; mutex_exit(&erip->xmitlock); eri_start_timer(erip, eri_check_link, 0); mutex_exit(&erip->intrlock); if (needind) mac_link_update(erip->mh, LINK_STATE_DOWN); } /* * Allocate CONSISTENT memory for rmds and tmds with appropriate alignment and * map it in IO space. * * The driver allocates STREAMS buffers which will be mapped in DVMA * space using DDI DMA resources. * */ static int eri_allocthings(struct eri *erip) { uintptr_t a; int size; uint32_t rval; int i; size_t real_len; uint32_t cookiec; int alloc_stat = 0; ddi_dma_cookie_t dma_cookie; /* * Return if resources are already allocated. */ if (erip->rmdp) return (alloc_stat); erip->alloc_flag = 0; /* * Allocate the TMD and RMD descriptors and extra for alignments. */ size = (ERI_RPENDING * sizeof (struct rmd) + ERI_TPENDING * sizeof (struct eri_tmd)) + ERI_GMDALIGN; rval = ddi_dma_alloc_handle(erip->dip, &desc_dma_attr, DDI_DMA_DONTWAIT, 0, &erip->md_h); if (rval != DDI_SUCCESS) { return (++alloc_stat); } erip->alloc_flag |= ERI_DESC_HANDLE_ALLOC; rval = ddi_dma_mem_alloc(erip->md_h, size, &erip->dev_attr, DDI_DMA_CONSISTENT, DDI_DMA_DONTWAIT, 0, (caddr_t *)&erip->iopbkbase, &real_len, &erip->mdm_h); if (rval != DDI_SUCCESS) { return (++alloc_stat); } erip->alloc_flag |= ERI_DESC_MEM_ALLOC; rval = ddi_dma_addr_bind_handle(erip->md_h, NULL, (caddr_t)erip->iopbkbase, size, DDI_DMA_RDWR | DDI_DMA_CONSISTENT, DDI_DMA_DONTWAIT, 0, &erip->md_c, &cookiec); if (rval != DDI_DMA_MAPPED) return (++alloc_stat); erip->alloc_flag |= ERI_DESC_MEM_MAP; if (cookiec != 1) return (++alloc_stat); erip->iopbiobase = erip->md_c.dmac_address; a = erip->iopbkbase; a = ROUNDUP(a, ERI_GMDALIGN); erip->rmdp = (struct rmd *)a; a += ERI_RPENDING * sizeof (struct rmd); erip->eri_tmdp = (struct eri_tmd *)a; /* * Specifically we reserve n (ERI_TPENDING + ERI_RPENDING) * pagetable entries. Therefore we have 2 ptes for each * descriptor. Since the ethernet buffers are 1518 bytes * so they can at most use 2 ptes. * Will do a ddi_dma_addr_setup for each bufer */ /* * In the current implementation, we use the ddi compliant * dma interface. We allocate ERI_RPENDING dma handles for receive * activity. The actual dma mapping is done in the io function * eri_read_dma(), by calling the ddi_dma_addr_bind_handle. * Dma resources are deallocated by calling ddi_dma_unbind_handle * in eri_reclaim() for transmit and eri_read_dma(), for receive io. */ if (eri_use_dvma_rx && (dvma_reserve(erip->dip, &eri_dma_limits, (ERI_RPENDING * 2), &erip->eri_dvmarh)) == DDI_SUCCESS) { erip->alloc_flag |= ERI_RCV_DVMA_ALLOC; } else { erip->eri_dvmarh = NULL; for (i = 0; i < ERI_RPENDING; i++) { rval = ddi_dma_alloc_handle(erip->dip, &dma_attr, DDI_DMA_DONTWAIT, 0, &erip->ndmarh[i]); if (rval != DDI_SUCCESS) { ERI_FAULT_MSG1(erip, SEVERITY_HIGH, ERI_VERB_MSG, alloc_rx_dmah_msg); alloc_stat++; break; } } erip->rcv_handle_cnt = i; if (i) erip->alloc_flag |= ERI_RCV_HANDLE_ALLOC; if (alloc_stat) return (alloc_stat); } /* * Allocate TX buffer * Note: buffers must always be allocated in the native * ordering of the CPU (always big-endian for Sparc). * ddi_dma_mem_alloc returns memory in the native ordering * of the bus (big endian for SBus, little endian for PCI). * So we cannot use ddi_dma_mem_alloc(, &erip->ge_dev_attr) * because we'll get little endian memory on PCI. */ if (ddi_dma_alloc_handle(erip->dip, &desc_dma_attr, DDI_DMA_DONTWAIT, 0, &erip->tbuf_handle) != DDI_SUCCESS) { ERI_FAULT_MSG1(erip, SEVERITY_HIGH, ERI_VERB_MSG, alloc_tx_dmah_msg); return (++alloc_stat); } erip->alloc_flag |= ERI_XBUFS_HANDLE_ALLOC; size = ERI_TPENDING * ERI_BUFSIZE; if (ddi_dma_mem_alloc(erip->tbuf_handle, size, &buf_attr, DDI_DMA_CONSISTENT, DDI_DMA_DONTWAIT, NULL, &erip->tbuf_kaddr, &real_len, &erip->tbuf_acch) != DDI_SUCCESS) { ERI_FAULT_MSG1(erip, SEVERITY_HIGH, ERI_VERB_MSG, alloc_tx_dmah_msg); return (++alloc_stat); } erip->alloc_flag |= ERI_XBUFS_KMEM_ALLOC; if (ddi_dma_addr_bind_handle(erip->tbuf_handle, NULL, erip->tbuf_kaddr, size, DDI_DMA_WRITE | DDI_DMA_CONSISTENT, DDI_DMA_DONTWAIT, 0, &dma_cookie, &cookiec) != DDI_DMA_MAPPED) { return (++alloc_stat); } erip->tbuf_ioaddr = dma_cookie.dmac_address; erip->alloc_flag |= ERI_XBUFS_KMEM_DMABIND; if (cookiec != 1) return (++alloc_stat); /* * Keep handy limit values for RMD, TMD, and Buffers. */ erip->rmdlimp = &((erip->rmdp)[ERI_RPENDING]); erip->eri_tmdlimp = &((erip->eri_tmdp)[ERI_TPENDING]); /* * Zero out RCV holders. */ bzero((caddr_t)erip->rmblkp, sizeof (erip->rmblkp)); return (alloc_stat); } /* <<<<<<<<<<<<<<<<< INTERRUPT HANDLING FUNCTION >>>>>>>>>>>>>>>>>>>> */ /* * First check to see if it is our device interrupting. */ static uint_t eri_intr(caddr_t arg) { struct eri *erip = (void *)arg; uint32_t erisbits; uint32_t mif_status; uint32_t serviced = DDI_INTR_UNCLAIMED; link_state_t linkupdate = LINK_STATE_UNKNOWN; boolean_t macupdate = B_FALSE; mblk_t *mp; mblk_t *head; mblk_t **tail; head = NULL; tail = &head; mutex_enter(&erip->intrlock); erisbits = GET_GLOBREG(status); /* * Check if it is only the RX_DONE interrupt, which is * the most frequent one. */ if (((erisbits & ERI_G_STATUS_RX_INT) == ERI_G_STATUS_RX_DONE) && (erip->flags & ERI_RUNNING)) { serviced = DDI_INTR_CLAIMED; goto rx_done_int; } /* Claim the first interrupt after initialization */ if (erip->flags & ERI_INITIALIZED) { erip->flags &= ~ERI_INITIALIZED; serviced = DDI_INTR_CLAIMED; } /* Check for interesting events */ if ((erisbits & ERI_G_STATUS_INTR) == 0) { #ifdef ESTAR_WORKAROUND uint32_t linkupdate; #endif ERI_DEBUG_MSG2(erip, DIAG_MSG, "eri_intr: Interrupt Not Claimed gsbits %X", erisbits); #ifdef DEBUG noteri++; #endif ERI_DEBUG_MSG2(erip, DIAG_MSG, "eri_intr:MIF Config = 0x%X", GET_MIFREG(mif_cfg)); ERI_DEBUG_MSG2(erip, DIAG_MSG, "eri_intr:MIF imask = 0x%X", GET_MIFREG(mif_imask)); ERI_DEBUG_MSG2(erip, DIAG_MSG, "eri_intr:INT imask = 0x%X", GET_GLOBREG(intmask)); ERI_DEBUG_MSG2(erip, DIAG_MSG, "eri_intr:alias %X", GET_GLOBREG(status_alias)); #ifdef ESTAR_WORKAROUND linkupdate = eri_check_link_noind(erip); #endif mutex_exit(&erip->intrlock); #ifdef ESTAR_WORKAROUND if (linkupdate != LINK_STATE_UNKNOWN) mac_link_update(erip->mh, linkupdate); #endif return (serviced); } serviced = DDI_INTR_CLAIMED; if (!(erip->flags & ERI_RUNNING)) { mutex_exit(&erip->intrlock); eri_uninit(erip); return (serviced); } if (erisbits & ERI_G_STATUS_FATAL_ERR) { ERI_DEBUG_MSG2(erip, INTR_MSG, "eri_intr: fatal error: erisbits = %X", erisbits); (void) eri_fatal_err(erip, erisbits); eri_reinit_fatal++; if (erip->rx_reset_issued) { erip->rx_reset_issued = 0; (void) eri_init_rx_channel(erip); mutex_exit(&erip->intrlock); } else { param_linkup = 0; erip->stats.link_up = LINK_STATE_DOWN; erip->stats.link_duplex = LINK_DUPLEX_UNKNOWN; DISABLE_MAC(erip); mutex_exit(&erip->intrlock); (void) eri_init(erip); } return (serviced); } if (erisbits & ERI_G_STATUS_NONFATAL_ERR) { ERI_DEBUG_MSG2(erip, INTR_MSG, "eri_intr: non-fatal error: erisbits = %X", erisbits); (void) eri_nonfatal_err(erip, erisbits); if (erip->linkcheck) { mutex_exit(&erip->intrlock); (void) eri_init(erip); return (serviced); } } if (erisbits & ERI_G_STATUS_MIF_INT) { uint16_t stat; ERI_DEBUG_MSG2(erip, XCVR_MSG, "eri_intr:MIF Interrupt:mii_status %X", erip->mii_status); eri_stop_timer(erip); /* acquire linklock */ mutex_enter(&erip->xmitlock); mutex_enter(&erip->xcvrlock); #ifdef ERI_MIF_POLL_STATUS_WORKAROUND mif_status = GET_MIFREG(mif_bsts); eri_mif_poll(erip, MIF_POLL_STOP); ERI_DEBUG_MSG3(erip, XCVR_MSG, "eri_intr: new MIF interrupt status %X XCVR status %X", mif_status, erip->mii_status); (void) eri_mii_read(erip, ERI_PHY_BMSR, &stat); linkupdate = eri_mif_check(erip, stat, stat); #else mif_status = GET_MIFREG(mif_bsts); eri_mif_poll(erip, MIF_POLL_STOP); linkupdate = eri_mif_check(erip, (uint16_t)mif_status, (uint16_t)(mif_status >> 16)); #endif eri_mif_poll(erip, MIF_POLL_START); mutex_exit(&erip->xcvrlock); mutex_exit(&erip->xmitlock); if (!erip->openloop_autoneg) eri_start_timer(erip, eri_check_link, ERI_LINKCHECK_TIMER); else eri_start_timer(erip, eri_check_link, ERI_P_FAULT_TIMER); } ERI_DEBUG_MSG2(erip, INTR_MSG, "eri_intr:May have Read Interrupt status:status %X", erisbits); rx_done_int: if ((erisbits & (ERI_G_STATUS_TX_INT_ME)) || (erip->tx_cur_cnt >= tx_interrupt_rate)) { mutex_enter(&erip->xmitlock); erip->tx_completion = (uint32_t)(GET_ETXREG(tx_completion) & ETX_COMPLETION_MASK); macupdate |= eri_reclaim(erip, erip->tx_completion); if (macupdate) erip->wantw = B_FALSE; mutex_exit(&erip->xmitlock); } if (erisbits & ERI_G_STATUS_RX_DONE) { volatile struct rmd *rmdp, *rmdpbase; volatile uint32_t rmdi; uint8_t loop_limit = 0x20; uint64_t flags; uint32_t rmdmax_mask = erip->rmdmax_mask; rmdpbase = erip->rmdp; rmdi = erip->rx_completion; rmdp = rmdpbase + rmdi; /* * Sync RMD before looking at it. */ ERI_SYNCIOPB(erip, rmdp, sizeof (struct rmd), DDI_DMA_SYNC_FORCPU); /* * Loop through each RMD. */ flags = GET_RMD_FLAGS(rmdp); while (((flags & ERI_RMD_OWN) == 0) && (loop_limit)) { /* process one packet */ mp = eri_read_dma(erip, rmdp, rmdi, flags); rmdi = (rmdi + 1) & rmdmax_mask; rmdp = rmdpbase + rmdi; if (mp != NULL) { *tail = mp; tail = &mp->b_next; } /* * ERI RCV DMA fetches or updates four descriptors * a time. Also we don't want to update the desc. * batch we just received packet on. So we update * descriptors for every 4 packets and we update * the group of 4 after the current batch. */ if (!(rmdi % 4)) { if (eri_overflow_reset && (GET_GLOBREG(status_alias) & ERI_G_STATUS_NONFATAL_ERR)) { loop_limit = 1; } else { erip->rx_kick = (rmdi + ERI_RPENDING - 4) & rmdmax_mask; PUT_ERXREG(rx_kick, erip->rx_kick); } } /* * Sync the next RMD before looking at it. */ ERI_SYNCIOPB(erip, rmdp, sizeof (struct rmd), DDI_DMA_SYNC_FORCPU); flags = GET_RMD_FLAGS(rmdp); loop_limit--; } erip->rx_completion = rmdi; } mutex_exit(&erip->intrlock); if (head) mac_rx(erip->mh, NULL, head); if (macupdate) mac_tx_update(erip->mh); if (linkupdate != LINK_STATE_UNKNOWN) mac_link_update(erip->mh, linkupdate); return (serviced); } /* * Handle interrupts for fatal errors * Need reinitialization. */ #define PCI_DATA_PARITY_REP (1 << 8) #define PCI_SING_TARGET_ABORT (1 << 11) #define PCI_RCV_TARGET_ABORT (1 << 12) #define PCI_RCV_MASTER_ABORT (1 << 13) #define PCI_SING_SYSTEM_ERR (1 << 14) #define PCI_DATA_PARITY_ERR (1 << 15) /* called with intrlock held */ static void eri_fatal_err(struct eri *erip, uint32_t erisbits) { uint16_t pci_status; uint32_t pci_error_int = 0; if (erisbits & ERI_G_STATUS_RX_TAG_ERR) { erip->rx_reset_issued = 1; HSTAT(erip, rxtag_err); } else { erip->global_reset_issued = 1; if (erisbits & ERI_G_STATUS_BUS_ERR_INT) { pci_error_int = 1; HSTAT(erip, pci_error_int); } else if (erisbits & ERI_G_STATUS_PERR_INT) { HSTAT(erip, parity_error); } else { HSTAT(erip, unknown_fatal); } } /* * PCI bus error */ if (pci_error_int && erip->pci_config_handle) { pci_status = pci_config_get16(erip->pci_config_handle, PCI_CONF_STAT); ERI_DEBUG_MSG2(erip, FATAL_ERR_MSG, "Bus Error Status %x", pci_status); if (pci_status & PCI_DATA_PARITY_REP) HSTAT(erip, pci_data_parity_err); if (pci_status & PCI_SING_TARGET_ABORT) HSTAT(erip, pci_signal_target_abort); if (pci_status & PCI_RCV_TARGET_ABORT) HSTAT(erip, pci_rcvd_target_abort); if (pci_status & PCI_RCV_MASTER_ABORT) HSTAT(erip, pci_rcvd_master_abort); if (pci_status & PCI_SING_SYSTEM_ERR) HSTAT(erip, pci_signal_system_err); if (pci_status & PCI_DATA_PARITY_ERR) HSTAT(erip, pci_signal_system_err); /* * clear it by writing the value that was read back. */ pci_config_put16(erip->pci_config_handle, PCI_CONF_STAT, pci_status); } } /* * Handle interrupts regarding non-fatal events. * TXMAC, RXMAC and MACCTL events */ static void eri_nonfatal_err(struct eri *erip, uint32_t erisbits) { uint32_t txmac_sts, rxmac_sts, macctl_sts, pause_time; #ifdef ERI_PM_WORKAROUND if (pci_report_pmcap(erip->dip, PCI_PM_IDLESPEED, PCI_PM_IDLESPEED_NONE) == DDI_SUCCESS) erip->stats.pmcap = ERI_PMCAP_NONE; #endif if (erisbits & ERI_G_STATUS_TX_MAC_INT) { txmac_sts = GET_MACREG(txsts); if (txmac_sts & BMAC_TXSTS_TX_URUN) { erip->linkcheck = 1; HSTAT(erip, txmac_urun); HSTAT(erip, oerrors); } if (txmac_sts & BMAC_TXSTS_MAXPKT_ERR) { erip->linkcheck = 1; HSTAT(erip, txmac_maxpkt_err); HSTAT(erip, oerrors); } if (txmac_sts & BMAC_TXSTS_NCC_EXP) { erip->stats.collisions += 0x10000; } if (txmac_sts & BMAC_TXSTS_ECC_EXP) { erip->stats.excessive_coll += 0x10000; } if (txmac_sts & BMAC_TXSTS_LCC_EXP) { erip->stats.late_coll += 0x10000; } if (txmac_sts & BMAC_TXSTS_FCC_EXP) { erip->stats.first_coll += 0x10000; } if (txmac_sts & BMAC_TXSTS_DEFER_EXP) { HSTAT(erip, defer_timer_exp); } if (txmac_sts & BMAC_TXSTS_PEAK_EXP) { erip->stats.peak_attempt_cnt += 0x100; } } if (erisbits & ERI_G_STATUS_RX_NO_BUF) { ERI_DEBUG_MSG1(erip, NONFATAL_MSG, "rx dropped/no free desc"); if (eri_overflow_reset) erip->linkcheck = 1; HSTAT(erip, no_free_rx_desc); HSTAT(erip, ierrors); } if (erisbits & ERI_G_STATUS_RX_MAC_INT) { rxmac_sts = GET_MACREG(rxsts); if (rxmac_sts & BMAC_RXSTS_RX_OVF) { #ifndef ERI_RMAC_HANG_WORKAROUND eri_stop_timer(erip); /* acquire linklock */ erip->check_rmac_hang ++; erip->check2_rmac_hang = 0; erip->rxfifo_wr_ptr = GET_ERXREG(rxfifo_wr_ptr); erip->rxfifo_rd_ptr = GET_ERXREG(rxfifo_rd_ptr); ERI_DEBUG_MSG5(erip, NONFATAL_MSG, "overflow intr %d: %8x wr:%2x rd:%2x", erip->check_rmac_hang, GET_MACREG(macsm), GET_ERXREG(rxfifo_wr_ptr), GET_ERXREG(rxfifo_rd_ptr)); eri_start_timer(erip, eri_check_link, ERI_CHECK_HANG_TIMER); #endif if (eri_overflow_reset) erip->linkcheck = 1; HSTAT(erip, rx_overflow); HSTAT(erip, ierrors); } if (rxmac_sts & BMAC_RXSTS_ALE_EXP) { erip->stats.rx_align_err += 0x10000; erip->stats.ierrors += 0x10000; } if (rxmac_sts & BMAC_RXSTS_CRC_EXP) { erip->stats.rx_crc_err += 0x10000; erip->stats.ierrors += 0x10000; } if (rxmac_sts & BMAC_RXSTS_LEN_EXP) { erip->stats.rx_length_err += 0x10000; erip->stats.ierrors += 0x10000; } if (rxmac_sts & BMAC_RXSTS_CVI_EXP) { erip->stats.rx_code_viol_err += 0x10000; erip->stats.ierrors += 0x10000; } } if (erisbits & ERI_G_STATUS_MAC_CTRL_INT) { macctl_sts = GET_MACREG(macctl_sts); if (macctl_sts & ERI_MCTLSTS_PAUSE_RCVD) { pause_time = ((macctl_sts & ERI_MCTLSTS_PAUSE_TIME) >> 16); ERI_DEBUG_MSG2(erip, NONFATAL_MSG, "PAUSE Received. pause time = %X slot_times", pause_time); HSTAT(erip, pause_rxcount); erip->stats.pause_time_count += pause_time; } if (macctl_sts & ERI_MCTLSTS_PAUSE_STATE) { HSTAT(erip, pause_oncount); erip->stats.pausing = 1; } if (macctl_sts & ERI_MCTLSTS_NONPAUSE) { HSTAT(erip, pause_offcount); erip->stats.pausing = 0; } } } /* * if this is the first init do not bother to save the * counters. */ static void eri_savecntrs(struct eri *erip) { uint32_t fecnt, aecnt, lecnt, rxcv; uint32_t ltcnt, excnt, fccnt; /* XXX What all gets added in ierrors and oerrors? */ fecnt = GET_MACREG(fecnt); HSTATN(erip, rx_crc_err, fecnt); PUT_MACREG(fecnt, 0); aecnt = GET_MACREG(aecnt); HSTATN(erip, rx_align_err, aecnt); PUT_MACREG(aecnt, 0); lecnt = GET_MACREG(lecnt); HSTATN(erip, rx_length_err, lecnt); PUT_MACREG(lecnt, 0); rxcv = GET_MACREG(rxcv); HSTATN(erip, rx_code_viol_err, rxcv); PUT_MACREG(rxcv, 0); ltcnt = GET_MACREG(ltcnt); HSTATN(erip, late_coll, ltcnt); PUT_MACREG(ltcnt, 0); erip->stats.collisions += (GET_MACREG(nccnt) + ltcnt); PUT_MACREG(nccnt, 0); excnt = GET_MACREG(excnt); HSTATN(erip, excessive_coll, excnt); PUT_MACREG(excnt, 0); fccnt = GET_MACREG(fccnt); HSTATN(erip, first_coll, fccnt); PUT_MACREG(fccnt, 0); /* * Do not add code violations to input errors. * They are already counted in CRC errors */ HSTATN(erip, ierrors, (fecnt + aecnt + lecnt)); HSTATN(erip, oerrors, (ltcnt + excnt)); } mblk_t * eri_allocb_sp(size_t size) { mblk_t *mp; size += 128; if ((mp = allocb(size + 3 * ERI_BURSTSIZE, BPRI_HI)) == NULL) { return (NULL); } mp->b_wptr += 128; mp->b_wptr = (uint8_t *)ROUNDUP2(mp->b_wptr, ERI_BURSTSIZE); mp->b_rptr = mp->b_wptr; return (mp); } mblk_t * eri_allocb(size_t size) { mblk_t *mp; if ((mp = allocb(size + 3 * ERI_BURSTSIZE, BPRI_HI)) == NULL) { return (NULL); } mp->b_wptr = (uint8_t *)ROUNDUP2(mp->b_wptr, ERI_BURSTSIZE); mp->b_rptr = mp->b_wptr; return (mp); } /* * Hardware Dependent Functions * New Section. */ /* <<<<<<<<<<<<<<<< Fast Ethernet PHY Bit Bang Operations >>>>>>>>>>>>>>>>>> */ static void send_bit(struct eri *erip, uint32_t x) { PUT_MIFREG(mif_bbdata, x); PUT_MIFREG(mif_bbclk, ERI_BBCLK_LOW); PUT_MIFREG(mif_bbclk, ERI_BBCLK_HIGH); } /* * To read the MII register bits according to the IEEE Standard */ static uint32_t get_bit_std(struct eri *erip) { uint32_t x; PUT_MIFREG(mif_bbclk, ERI_BBCLK_LOW); drv_usecwait(1); /* wait for >330 ns for stable data */ if (param_transceiver == INTERNAL_XCVR) x = (GET_MIFREG(mif_cfg) & ERI_MIF_CFGM0) ? 1 : 0; else x = (GET_MIFREG(mif_cfg) & ERI_MIF_CFGM1) ? 1 : 0; PUT_MIFREG(mif_bbclk, ERI_BBCLK_HIGH); return (x); } #define SEND_BIT(x) send_bit(erip, x) #define GET_BIT_STD(x) x = get_bit_std(erip) static void eri_bb_mii_write(struct eri *erip, uint8_t regad, uint16_t data) { uint8_t phyad; int i; PUT_MIFREG(mif_bbopenb, 1); /* Enable the MII driver */ phyad = erip->phyad; (void) eri_bb_force_idle(erip); SEND_BIT(0); SEND_BIT(1); /* */ SEND_BIT(0); SEND_BIT(1); /* */ for (i = 4; i >= 0; i--) { /* */ SEND_BIT((phyad >> i) & 1); } for (i = 4; i >= 0; i--) { /* */ SEND_BIT((regad >> i) & 1); } SEND_BIT(1); SEND_BIT(0); /* */ for (i = 0xf; i >= 0; i--) { /* */ SEND_BIT((data >> i) & 1); } PUT_MIFREG(mif_bbopenb, 0); /* Disable the MII driver */ } /* Return 0 if OK, 1 if error (Transceiver does not talk management) */ static uint32_t eri_bb_mii_read(struct eri *erip, uint8_t regad, uint16_t *datap) { uint8_t phyad; int i; uint32_t x; uint32_t y; *datap = 0; PUT_MIFREG(mif_bbopenb, 1); /* Enable the MII driver */ phyad = erip->phyad; (void) eri_bb_force_idle(erip); SEND_BIT(0); SEND_BIT(1); /* */ SEND_BIT(1); SEND_BIT(0); /* */ for (i = 4; i >= 0; i--) { /* */ SEND_BIT((phyad >> i) & 1); } for (i = 4; i >= 0; i--) { /* */ SEND_BIT((regad >> i) & 1); } PUT_MIFREG(mif_bbopenb, 0); /* Disable the MII driver */ GET_BIT_STD(x); GET_BIT_STD(y); /* */ for (i = 0xf; i >= 0; i--) { /* */ GET_BIT_STD(x); *datap += (x << i); } /* Kludge to get the Transceiver out of hung mode */ /* XXX: Test if this is still needed */ GET_BIT_STD(x); GET_BIT_STD(x); GET_BIT_STD(x); return (y); } static void eri_bb_force_idle(struct eri *erip) { int i; for (i = 0; i < 33; i++) { SEND_BIT(1); } } /* <<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>> */ /* <<<<<<<<<<<<< Frame Register used for MII operations >>>>>>>>>>>>>>>>>>>> */ #ifdef ERI_FRM_DEBUG int frame_flag = 0; #endif /* Return 0 if OK, 1 if error (Transceiver does not talk management) */ static uint32_t eri_mii_read(struct eri *erip, uint8_t regad, uint16_t *datap) { uint32_t frame; uint8_t phyad; if (param_transceiver == NO_XCVR) return (1); /* No xcvr present */ if (!erip->frame_enable) return (eri_bb_mii_read(erip, regad, datap)); phyad = erip->phyad; #ifdef ERI_FRM_DEBUG if (!frame_flag) { eri_errror(erip->dip, "Frame Register used for MII"); frame_flag = 1; } #endif ERI_DEBUG_MSG3(erip, FRM_MSG, "Frame Reg :mii_read: phyad = %X reg = %X ", phyad, regad); PUT_MIFREG(mif_frame, ERI_MIF_FRREAD | (phyad << ERI_MIF_FRPHYAD_SHIFT) | (regad << ERI_MIF_FRREGAD_SHIFT)); MIF_ERIDELAY(300, phyad, regad); frame = GET_MIFREG(mif_frame); if ((frame & ERI_MIF_FRTA0) == 0) { return (1); } else { *datap = (uint16_t)(frame & ERI_MIF_FRDATA); return (0); } } static void eri_mii_write(struct eri *erip, uint8_t regad, uint16_t data) { uint8_t phyad; if (!erip->frame_enable) { eri_bb_mii_write(erip, regad, data); return; } phyad = erip->phyad; PUT_MIFREG(mif_frame, (ERI_MIF_FRWRITE | (phyad << ERI_MIF_FRPHYAD_SHIFT) | (regad << ERI_MIF_FRREGAD_SHIFT) | data)); MIF_ERIDELAY(300, phyad, regad); (void) GET_MIFREG(mif_frame); } /* <<<<<<<<<<<<<<<<< PACKET TRANSMIT FUNCTIONS >>>>>>>>>>>>>>>>>>>> */ #define ERI_CROSS_PAGE_BOUNDRY(i, size, pagesize) \ ((i & pagesize) != ((i + size) & pagesize)) /* * Send a single mblk. Returns B_TRUE if the packet is sent, or disposed of * by freemsg. Returns B_FALSE if the packet was not sent or queued, and * should be retried later (due to tx resource exhaustion.) */ static boolean_t eri_send_msg(struct eri *erip, mblk_t *mp) { volatile struct eri_tmd *tmdp = NULL; volatile struct eri_tmd *tbasep = NULL; uint32_t len_msg = 0; uint32_t i; uint64_t int_me = 0; uint_t tmdcsum = 0; uint_t start_offset = 0; uint_t stuff_offset = 0; uint_t flags = 0; caddr_t ptr; uint32_t offset; uint64_t ctrl; ddi_dma_cookie_t c; if (!param_linkup) { freemsg(mp); HSTAT(erip, tnocar); HSTAT(erip, oerrors); return (B_TRUE); } #ifdef ERI_HWCSUM mac_hcksum_get(mp, &start_offset, &stuff_offset, NULL, NULL, &flags); if (flags & HCK_PARTIALCKSUM) { if (get_ether_type(mp->b_rptr) == ETHERTYPE_VLAN) { start_offset += ETHERHEADER_SIZE + 4; stuff_offset += ETHERHEADER_SIZE + 4; } else { start_offset += ETHERHEADER_SIZE; stuff_offset += ETHERHEADER_SIZE; } tmdcsum = ERI_TMD_CSENABL; } #endif /* ERI_HWCSUM */ if ((len_msg = msgsize(mp)) > ERI_BUFSIZE) { /* * This sholdn't ever occur, as GLD should not send us * packets that are too big. */ HSTAT(erip, oerrors); freemsg(mp); return (B_TRUE); } /* * update MIB II statistics */ BUMP_OutNUcast(erip, mp->b_rptr); mutex_enter(&erip->xmitlock); tbasep = erip->eri_tmdp; /* Check if there are enough descriptors for this packet */ tmdp = erip->tnextp; if (tmdp >= erip->tcurp) /* check notmds */ i = tmdp - erip->tcurp; else i = tmdp + ERI_TPENDING - erip->tcurp; if (i > (ERI_TPENDING - 4)) goto notmds; if (i >= (ERI_TPENDING >> 1) && !(erip->starts & 0x7)) { int_me = ERI_TMD_INTME; if (!erip->tx_int_me) { PUT_GLOBREG(intmask, GET_GLOBREG(intmask) & ~(ERI_G_MASK_TX_INT_ME)); erip->tx_int_me = 1; } } i = tmdp - tbasep; /* index */ offset = (i * ERI_BUFSIZE); ptr = erip->tbuf_kaddr + offset; mcopymsg(mp, ptr); #ifdef ERI_HDX_BUG_WORKAROUND if ((param_mode) || (eri_hdx_pad_enable == 0)) { if (len_msg < ETHERMIN) { bzero((ptr + len_msg), (ETHERMIN - len_msg)); len_msg = ETHERMIN; } } else { if (len_msg < 97) { bzero((ptr + len_msg), (97 - len_msg)); len_msg = 97; } } #endif c.dmac_address = erip->tbuf_ioaddr + offset; (void) ddi_dma_sync(erip->tbuf_handle, (off_t)offset, len_msg, DDI_DMA_SYNC_FORDEV); /* first and last (and only!) descr of packet */ ctrl = ERI_TMD_SOP | ERI_TMD_EOP | int_me | tmdcsum | (start_offset << ERI_TMD_CSSTART_SHIFT) | (stuff_offset << ERI_TMD_CSSTUFF_SHIFT); PUT_TMD(tmdp, c, len_msg, ctrl); ERI_SYNCIOPB(erip, tmdp, sizeof (struct eri_tmd), DDI_DMA_SYNC_FORDEV); tmdp = NEXTTMD(erip, tmdp); erip->tx_cur_cnt++; erip->tx_kick = tmdp - tbasep; PUT_ETXREG(tx_kick, erip->tx_kick); erip->tnextp = tmdp; erip->starts++; if (erip->tx_cur_cnt >= tx_interrupt_rate) { erip->tx_completion = (uint32_t)(GET_ETXREG(tx_completion) & ETX_COMPLETION_MASK); (void) eri_reclaim(erip, erip->tx_completion); } mutex_exit(&erip->xmitlock); return (B_TRUE); notmds: HSTAT(erip, notmds); erip->wantw = B_TRUE; mutex_exit(&erip->xmitlock); return (B_FALSE); } static mblk_t * eri_m_tx(void *arg, mblk_t *mp) { struct eri *erip = arg; mblk_t *next; while (mp != NULL) { next = mp->b_next; mp->b_next = NULL; if (!eri_send_msg(erip, mp)) { mp->b_next = next; break; } mp = next; } return (mp); } /* * Transmit completion reclaiming. */ static boolean_t eri_reclaim(struct eri *erip, uint32_t tx_completion) { volatile struct eri_tmd *tmdp; struct eri_tmd *tcomp; struct eri_tmd *tbasep; struct eri_tmd *tlimp; uint64_t flags; uint_t reclaimed = 0; tbasep = erip->eri_tmdp; tlimp = erip->eri_tmdlimp; tmdp = erip->tcurp; tcomp = tbasep + tx_completion; /* pointer to completion tmd */ /* * Loop through each TMD starting from tcurp and upto tcomp. */ while (tmdp != tcomp) { flags = GET_TMD_FLAGS(tmdp); if (flags & (ERI_TMD_SOP)) HSTAT(erip, opackets64); HSTATN(erip, obytes64, (flags & ERI_TMD_BUFSIZE)); tmdp = NEXTTMDP(tbasep, tlimp, tmdp); reclaimed++; } erip->tcurp = tmdp; erip->tx_cur_cnt -= reclaimed; return (erip->wantw && reclaimed ? B_TRUE : B_FALSE); } /* <<<<<<<<<<<<<<<<<<< PACKET RECEIVE FUNCTIONS >>>>>>>>>>>>>>>>>>> */ static mblk_t * eri_read_dma(struct eri *erip, volatile struct rmd *rmdp, int rmdi, uint64_t flags) { mblk_t *bp, *nbp; int len; uint_t ccnt; ddi_dma_cookie_t c; #ifdef ERI_RCV_CKSUM ushort_t sum; #endif /* ERI_RCV_CKSUM */ mblk_t *retmp = NULL; bp = erip->rmblkp[rmdi]; len = (flags & ERI_RMD_BUFSIZE) >> ERI_RMD_BUFSIZE_SHIFT; #ifdef ERI_DONT_STRIP_CRC len -= 4; #endif /* * In the event of RX FIFO overflow error, ERI REV 1.0 ASIC can * corrupt packets following the descriptor corresponding the * overflow. To detect the corrupted packets, we disable the * dropping of the "bad" packets at the MAC. The descriptor * then would have the "BAD" bit set. We drop the overflowing * packet and the packet following it. We could have done some sort * of checking to determine if the second packet was indeed bad * (using CRC or checksum) but it would be expensive in this * routine, since it is run in interrupt context. */ if ((flags & ERI_RMD_BAD) || (len < ETHERMIN) || (len > ETHERMAX+4)) { HSTAT(erip, rx_bad_pkts); if ((flags & ERI_RMD_BAD) == 0) HSTAT(erip, ierrors); if (len < ETHERMIN) { HSTAT(erip, rx_runt); } else if (len > ETHERMAX+4) { HSTAT(erip, rx_toolong_pkts); } HSTAT(erip, drop); UPDATE_RMD(rmdp); ERI_SYNCIOPB(erip, rmdp, sizeof (struct rmd), DDI_DMA_SYNC_FORDEV); return (NULL); } #ifdef ERI_DONT_STRIP_CRC { uint32_t hw_fcs, tail_fcs; /* * since we don't let the hardware strip the CRC in hdx * then the driver needs to do it. * this is to workaround a hardware bug */ bp->b_wptr = bp->b_rptr + ERI_FSTBYTE_OFFSET + len; /* * Get the Checksum calculated by the hardware. */ hw_fcs = flags & ERI_RMD_CKSUM; /* * Catch the case when the CRC starts on an odd * boundary. */ tail_fcs = bp->b_wptr[0] << 8 | bp->b_wptr[1]; tail_fcs += bp->b_wptr[2] << 8 | bp->b_wptr[3]; tail_fcs = (tail_fcs & 0xffff) + (tail_fcs >> 16); if ((uintptr_t)(bp->b_wptr) & 1) { tail_fcs = (tail_fcs << 8) & 0xffff | (tail_fcs >> 8); } hw_fcs += tail_fcs; hw_fcs = (hw_fcs & 0xffff) + (hw_fcs >> 16); hw_fcs &= 0xffff; /* * Now we can replace what the hardware wrote, make believe * it got it right in the first place. */ flags = (flags & ~(uint64_t)ERI_RMD_CKSUM) | hw_fcs; } #endif /* * Packet Processing * Once we get a packet bp, we try allocate a new mblk, nbp * to replace this one. If we succeed, we map it to the current * dma handle and update the descriptor with the new cookie. We * then put bp in our read service queue erip->ipq, if it exists * or we just bp to the streams expecting it. * If allocation of the new mblk fails, we implicitly drop the * current packet, i.e do not pass up the mblk and re-use it. * Re-mapping is not required. */ if (len < eri_rx_bcopy_max) { if ((nbp = eri_allocb_sp(len + ERI_FSTBYTE_OFFSET))) { (void) ddi_dma_sync(erip->ndmarh[rmdi], 0, len + ERI_FSTBYTE_OFFSET, DDI_DMA_SYNC_FORCPU); DB_TYPE(nbp) = M_DATA; bcopy(bp->b_rptr, nbp->b_rptr, len + ERI_FSTBYTE_OFFSET); UPDATE_RMD(rmdp); ERI_SYNCIOPB(erip, rmdp, sizeof (struct rmd), DDI_DMA_SYNC_FORDEV); /* Add the First Byte offset to the b_rptr */ nbp->b_rptr += ERI_FSTBYTE_OFFSET; nbp->b_wptr = nbp->b_rptr + len; #ifdef ERI_RCV_CKSUM sum = ~(uint16_t)(flags & ERI_RMD_CKSUM); ERI_PROCESS_READ(erip, nbp, sum); #else ERI_PROCESS_READ(erip, nbp); #endif retmp = nbp; } else { /* * mblk allocation has failed. Re-use the old mblk for * the next packet. Re-mapping is not required since * the same mblk and dma cookie is to be used again. */ HSTAT(erip, ierrors); HSTAT(erip, allocbfail); HSTAT(erip, norcvbuf); UPDATE_RMD(rmdp); ERI_SYNCIOPB(erip, rmdp, sizeof (struct rmd), DDI_DMA_SYNC_FORDEV); ERI_DEBUG_MSG1(erip, RESOURCE_MSG, "allocb fail"); } } else { /* Use dma unmap/map */ if ((nbp = eri_allocb_sp(ERI_BUFSIZE))) { /* * How do we harden this, specially if unbind * succeeds and then bind fails? * If Unbind fails, we can leave without updating * the descriptor but would it continue to work on * next round? */ (void) ddi_dma_unbind_handle(erip->ndmarh[rmdi]); (void) ddi_dma_addr_bind_handle(erip->ndmarh[rmdi], NULL, (caddr_t)nbp->b_rptr, ERI_BUFSIZE, DDI_DMA_READ | DDI_DMA_CONSISTENT, DDI_DMA_DONTWAIT, 0, &c, &ccnt); erip->rmblkp[rmdi] = nbp; PUT_RMD(rmdp, c); ERI_SYNCIOPB(erip, rmdp, sizeof (struct rmd), DDI_DMA_SYNC_FORDEV); /* Add the First Byte offset to the b_rptr */ bp->b_rptr += ERI_FSTBYTE_OFFSET; bp->b_wptr = bp->b_rptr + len; #ifdef ERI_RCV_CKSUM sum = ~(uint16_t)(flags & ERI_RMD_CKSUM); ERI_PROCESS_READ(erip, bp, sum); #else ERI_PROCESS_READ(erip, bp); #endif retmp = bp; } else { /* * mblk allocation has failed. Re-use the old mblk for * the next packet. Re-mapping is not required since * the same mblk and dma cookie is to be used again. */ HSTAT(erip, ierrors); HSTAT(erip, allocbfail); HSTAT(erip, norcvbuf); UPDATE_RMD(rmdp); ERI_SYNCIOPB(erip, rmdp, sizeof (struct rmd), DDI_DMA_SYNC_FORDEV); ERI_DEBUG_MSG1(erip, RESOURCE_MSG, "allocb fail"); } } return (retmp); } #define LINK_STAT_DISPLAY_TIME 20 static int eri_init_xfer_params(struct eri *erip) { int i; dev_info_t *dip; dip = erip->dip; for (i = 0; i < A_CNT(param_arr); i++) erip->param_arr[i] = param_arr[i]; erip->xmit_dma_mode = 0; erip->rcv_dma_mode = 0; erip->mifpoll_enable = mifpoll_enable; erip->lance_mode_enable = lance_mode; erip->frame_enable = 1; erip->ngu_enable = ngu_enable; if (!erip->g_nd && !eri_param_register(erip, erip->param_arr, A_CNT(param_arr))) { ERI_FAULT_MSG1(erip, SEVERITY_LOW, ERI_VERB_MSG, param_reg_fail_msg); return (-1); } /* * Set up the start-up values for user-configurable parameters * Get the values from the global variables first. * Use the MASK to limit the value to allowed maximum. */ param_transceiver = NO_XCVR; /* * The link speed may be forced to either 10 Mbps or 100 Mbps using the * property "transfer-speed". This may be done in OBP by using the command * "apply transfer-speed= ". The speed may be either 10 or 100. */ i = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "transfer-speed", 0); if (i != 0) { param_autoneg = 0; /* force speed */ param_anar_100T4 = 0; param_anar_10fdx = 0; param_anar_10hdx = 0; param_anar_100fdx = 0; param_anar_100hdx = 0; param_anar_asm_dir = 0; param_anar_pause = 0; if (i == 10) param_anar_10hdx = 1; else if (i == 100) param_anar_100hdx = 1; } /* * Get the parameter values configured in .conf file. */ param_ipg1 = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "ipg1", ipg1) & ERI_MASK_8BIT; param_ipg2 = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "ipg2", ipg2) & ERI_MASK_8BIT; param_use_intphy = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "use_int_xcvr", use_int_xcvr) & ERI_MASK_1BIT; param_use_intphy = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "pace_size", pace_size) & ERI_MASK_8BIT; param_autoneg = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "adv_autoneg_cap", adv_autoneg_cap) & ERI_MASK_1BIT; param_autoneg = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "adv_autoneg_cap", adv_autoneg_cap) & ERI_MASK_1BIT; param_anar_100T4 = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "adv_100T4_cap", adv_100T4_cap) & ERI_MASK_1BIT; param_anar_100fdx = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "adv_100fdx_cap", adv_100fdx_cap) & ERI_MASK_1BIT; param_anar_100hdx = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "adv_100hdx_cap", adv_100hdx_cap) & ERI_MASK_1BIT; param_anar_10fdx = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "adv_10fdx_cap", adv_10fdx_cap) & ERI_MASK_1BIT; param_anar_10hdx = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "adv_10hdx_cap", adv_10hdx_cap) & ERI_MASK_1BIT; param_ipg0 = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "ipg0", ipg0) & ERI_MASK_8BIT; param_intr_blank_time = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "intr_blank_time", intr_blank_time) & ERI_MASK_8BIT; param_intr_blank_packets = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "intr_blank_packets", intr_blank_packets) & ERI_MASK_8BIT; param_lance_mode = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "lance_mode", lance_mode) & ERI_MASK_1BIT; param_select_link = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "select_link", select_link) & ERI_MASK_1BIT; param_default_link = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "default_link", default_link) & ERI_MASK_1BIT; param_anar_asm_dir = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "adv_asm_dir_cap", adv_pauseTX_cap) & ERI_MASK_1BIT; param_anar_pause = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 0, "adv_pause_cap", adv_pauseRX_cap) & ERI_MASK_1BIT; if (link_pulse_disabled) erip->link_pulse_disabled = 1; if (ddi_prop_exists(DDI_DEV_T_ANY, dip, 0, "link-pulse-disabled")) erip->link_pulse_disabled = 1; eri_statinit(erip); return (0); } static void eri_process_ndd_ioctl(struct eri *erip, queue_t *wq, mblk_t *mp, int cmd) { uint32_t old_ipg1, old_ipg2, old_use_int_xcvr, old_autoneg; uint32_t old_100T4; uint32_t old_100fdx, old_100hdx, old_10fdx, old_10hdx; uint32_t old_ipg0, old_lance_mode; uint32_t old_intr_blank_time, old_intr_blank_packets; uint32_t old_asm_dir, old_pause; uint32_t old_select_link, old_default_link; switch (cmd) { case ERI_ND_GET: old_autoneg = param_autoneg; old_100T4 = param_anar_100T4; old_100fdx = param_anar_100fdx; old_100hdx = param_anar_100hdx; old_10fdx = param_anar_10fdx; old_10hdx = param_anar_10hdx; old_asm_dir = param_anar_asm_dir; old_pause = param_anar_pause; param_autoneg = old_autoneg & ~ERI_NOTUSR; param_anar_100T4 = old_100T4 & ~ERI_NOTUSR; param_anar_100fdx = old_100fdx & ~ERI_NOTUSR; param_anar_100hdx = old_100hdx & ~ERI_NOTUSR; param_anar_10fdx = old_10fdx & ~ERI_NOTUSR; param_anar_10hdx = old_10hdx & ~ERI_NOTUSR; param_anar_asm_dir = old_asm_dir & ~ERI_NOTUSR; param_anar_pause = old_pause & ~ERI_NOTUSR; if (!eri_nd_getset(wq, erip->g_nd, mp)) { param_autoneg = old_autoneg; param_anar_100T4 = old_100T4; param_anar_100fdx = old_100fdx; param_anar_100hdx = old_100hdx; param_anar_10fdx = old_10fdx; param_anar_10hdx = old_10hdx; param_anar_asm_dir = old_asm_dir; param_anar_pause = old_pause; miocnak(wq, mp, 0, EINVAL); return; } param_autoneg = old_autoneg; param_anar_100T4 = old_100T4; param_anar_100fdx = old_100fdx; param_anar_100hdx = old_100hdx; param_anar_10fdx = old_10fdx; param_anar_10hdx = old_10hdx; param_anar_asm_dir = old_asm_dir; param_anar_pause = old_pause; qreply(wq, mp); break; case ERI_ND_SET: old_ipg0 = param_ipg0; old_intr_blank_time = param_intr_blank_time; old_intr_blank_packets = param_intr_blank_packets; old_lance_mode = param_lance_mode; old_ipg1 = param_ipg1; old_ipg2 = param_ipg2; old_use_int_xcvr = param_use_intphy; old_autoneg = param_autoneg; old_100T4 = param_anar_100T4; old_100fdx = param_anar_100fdx; old_100hdx = param_anar_100hdx; old_10fdx = param_anar_10fdx; old_10hdx = param_anar_10hdx; param_autoneg = 0xff; old_asm_dir = param_anar_asm_dir; param_anar_asm_dir = 0xff; old_pause = param_anar_pause; param_anar_pause = 0xff; old_select_link = param_select_link; old_default_link = param_default_link; if (!eri_nd_getset(wq, erip->g_nd, mp)) { param_autoneg = old_autoneg; miocnak(wq, mp, 0, EINVAL); return; } qreply(wq, mp); if (param_autoneg != 0xff) { ERI_DEBUG_MSG2(erip, NDD_MSG, "ndd_ioctl: new param_autoneg %d", param_autoneg); param_linkup = 0; erip->stats.link_up = LINK_STATE_DOWN; erip->stats.link_duplex = LINK_DUPLEX_UNKNOWN; (void) eri_init(erip); } else { param_autoneg = old_autoneg; if ((old_use_int_xcvr != param_use_intphy) || (old_default_link != param_default_link) || (old_select_link != param_select_link)) { param_linkup = 0; erip->stats.link_up = LINK_STATE_DOWN; erip->stats.link_duplex = LINK_DUPLEX_UNKNOWN; (void) eri_init(erip); } else if ((old_ipg1 != param_ipg1) || (old_ipg2 != param_ipg2) || (old_ipg0 != param_ipg0) || (old_intr_blank_time != param_intr_blank_time) || (old_intr_blank_packets != param_intr_blank_packets) || (old_lance_mode != param_lance_mode)) { param_linkup = 0; erip->stats.link_up = LINK_STATE_DOWN; erip->stats.link_duplex = LINK_DUPLEX_UNKNOWN; (void) eri_init(erip); } } break; } } static int eri_stat_kstat_update(kstat_t *ksp, int rw) { struct eri *erip; struct erikstat *erikp; struct stats *esp; boolean_t macupdate = B_FALSE; erip = (struct eri *)ksp->ks_private; erikp = (struct erikstat *)ksp->ks_data; if (rw != KSTAT_READ) return (EACCES); /* * Update all the stats by reading all the counter registers. * Counter register stats are not updated till they overflow * and interrupt. */ mutex_enter(&erip->xmitlock); if ((erip->flags & ERI_RUNNING) && (erip->flags & ERI_TXINIT)) { erip->tx_completion = GET_ETXREG(tx_completion) & ETX_COMPLETION_MASK; macupdate |= eri_reclaim(erip, erip->tx_completion); } mutex_exit(&erip->xmitlock); if (macupdate) mac_tx_update(erip->mh); eri_savecntrs(erip); esp = &erip->stats; erikp->erik_txmac_maxpkt_err.value.ul = esp->txmac_maxpkt_err; erikp->erik_defer_timer_exp.value.ul = esp->defer_timer_exp; erikp->erik_peak_attempt_cnt.value.ul = esp->peak_attempt_cnt; erikp->erik_tx_hang.value.ul = esp->tx_hang; erikp->erik_no_free_rx_desc.value.ul = esp->no_free_rx_desc; erikp->erik_rx_hang.value.ul = esp->rx_hang; erikp->erik_rx_length_err.value.ul = esp->rx_length_err; erikp->erik_rx_code_viol_err.value.ul = esp->rx_code_viol_err; erikp->erik_pause_rxcount.value.ul = esp->pause_rxcount; erikp->erik_pause_oncount.value.ul = esp->pause_oncount; erikp->erik_pause_offcount.value.ul = esp->pause_offcount; erikp->erik_pause_time_count.value.ul = esp->pause_time_count; erikp->erik_inits.value.ul = esp->inits; erikp->erik_jab.value.ul = esp->jab; erikp->erik_notmds.value.ul = esp->notmds; erikp->erik_allocbfail.value.ul = esp->allocbfail; erikp->erik_drop.value.ul = esp->drop; erikp->erik_rx_bad_pkts.value.ul = esp->rx_bad_pkts; erikp->erik_rx_inits.value.ul = esp->rx_inits; erikp->erik_tx_inits.value.ul = esp->tx_inits; erikp->erik_rxtag_err.value.ul = esp->rxtag_err; erikp->erik_parity_error.value.ul = esp->parity_error; erikp->erik_pci_error_int.value.ul = esp->pci_error_int; erikp->erik_unknown_fatal.value.ul = esp->unknown_fatal; erikp->erik_pci_data_parity_err.value.ul = esp->pci_data_parity_err; erikp->erik_pci_signal_target_abort.value.ul = esp->pci_signal_target_abort; erikp->erik_pci_rcvd_target_abort.value.ul = esp->pci_rcvd_target_abort; erikp->erik_pci_rcvd_master_abort.value.ul = esp->pci_rcvd_master_abort; erikp->erik_pci_signal_system_err.value.ul = esp->pci_signal_system_err; erikp->erik_pci_det_parity_err.value.ul = esp->pci_det_parity_err; erikp->erik_pmcap.value.ul = esp->pmcap; return (0); } static void eri_statinit(struct eri *erip) { struct kstat *ksp; struct erikstat *erikp; if ((ksp = kstat_create("eri", erip->instance, "driver_info", "net", KSTAT_TYPE_NAMED, sizeof (struct erikstat) / sizeof (kstat_named_t), 0)) == NULL) { ERI_FAULT_MSG1(erip, SEVERITY_LOW, ERI_VERB_MSG, kstat_create_fail_msg); return; } erip->ksp = ksp; erikp = (struct erikstat *)(ksp->ks_data); /* * MIB II kstat variables */ kstat_named_init(&erikp->erik_inits, "inits", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_txmac_maxpkt_err, "txmac_maxpkt_err", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_defer_timer_exp, "defer_timer_exp", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_peak_attempt_cnt, "peak_attempt_cnt", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_tx_hang, "tx_hang", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_no_free_rx_desc, "no_free_rx_desc", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_rx_hang, "rx_hang", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_rx_length_err, "rx_length_err", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_rx_code_viol_err, "rx_code_viol_err", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_pause_rxcount, "pause_rcv_cnt", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_pause_oncount, "pause_on_cnt", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_pause_offcount, "pause_off_cnt", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_pause_time_count, "pause_time_cnt", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_jab, "jabber", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_notmds, "no_tmds", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_allocbfail, "allocbfail", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_drop, "drop", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_rx_bad_pkts, "bad_pkts", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_rx_inits, "rx_inits", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_tx_inits, "tx_inits", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_rxtag_err, "rxtag_error", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_parity_error, "parity_error", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_pci_error_int, "pci_error_interrupt", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_unknown_fatal, "unknown_fatal", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_pci_data_parity_err, "pci_data_parity_err", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_pci_signal_target_abort, "pci_signal_target_abort", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_pci_rcvd_target_abort, "pci_rcvd_target_abort", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_pci_rcvd_master_abort, "pci_rcvd_master_abort", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_pci_signal_system_err, "pci_signal_system_err", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_pci_det_parity_err, "pci_det_parity_err", KSTAT_DATA_ULONG); kstat_named_init(&erikp->erik_pmcap, "pmcap", KSTAT_DATA_ULONG); ksp->ks_update = eri_stat_kstat_update; ksp->ks_private = (void *) erip; kstat_install(ksp); } /* <<<<<<<<<<<<<<<<<<<<<<< NDD SUPPORT FUNCTIONS >>>>>>>>>>>>>>>>>>> */ /* * ndd support functions to get/set parameters */ /* Free the Named Dispatch Table by calling eri_nd_free */ static void eri_param_cleanup(struct eri *erip) { if (erip->g_nd) (void) eri_nd_free(&erip->g_nd); } /* * Extracts the value from the eri parameter array and prints the * parameter value. cp points to the required parameter. */ /* ARGSUSED */ static int eri_param_get(queue_t *q, mblk_t *mp, caddr_t cp) { param_t *eripa = (void *)cp; int param_len = 1; uint32_t param_val; mblk_t *nmp; int ok; param_val = eripa->param_val; /* * Calculate space required in mblk. * Remember to include NULL terminator. */ do { param_len++; param_val /= 10; } while (param_val); ok = eri_mk_mblk_tail_space(mp, &nmp, param_len); if (ok == 0) { (void) sprintf((char *)nmp->b_wptr, "%d", eripa->param_val); nmp->b_wptr += param_len; } return (ok); } /* * Check if there is space for p_val at the end if mblk. * If not, allocate new 1k mblk. */ static int eri_mk_mblk_tail_space(mblk_t *mp, mblk_t **nmp, size_t sz) { mblk_t *tmp = mp; while (tmp->b_cont) tmp = tmp->b_cont; if (MBLKTAIL(tmp) < sz) { if ((tmp->b_cont = allocb(1024, BPRI_HI)) == NULL) return (ENOMEM); tmp = tmp->b_cont; } *nmp = tmp; return (0); } /* * Register each element of the parameter array with the * named dispatch handler. Each element is loaded using * eri_nd_load() */ static int eri_param_register(struct eri *erip, param_t *eripa, int cnt) { /* cnt gives the count of the number of */ /* elements present in the parameter array */ int i; for (i = 0; i < cnt; i++, eripa++) { pfi_t setter = (pfi_t)eri_param_set; switch (eripa->param_name[0]) { case '+': /* read-write */ setter = (pfi_t)eri_param_set; break; case '-': /* read-only */ setter = NULL; break; case '!': /* read-only, not displayed */ case '%': /* read-write, not displayed */ continue; } if (!eri_nd_load(&erip->g_nd, eripa->param_name + 1, (pfi_t)eri_param_get, setter, (caddr_t)eripa)) { (void) eri_nd_free(&erip->g_nd); return (B_FALSE); } } return (B_TRUE); } /* * Sets the eri parameter to the value in the param_register using * eri_nd_load(). */ /* ARGSUSED */ static int eri_param_set(queue_t *q, mblk_t *mp, char *value, caddr_t cp) { char *end; long new_value; param_t *eripa = (void *)cp; if (ddi_strtol(value, &end, 10, &new_value) != 0) return (EINVAL); if (end == value || new_value < eripa->param_min || new_value > eripa->param_max) { return (EINVAL); } eripa->param_val = (uint32_t)new_value; return (0); } /* Free the table pointed to by 'ndp' */ static void eri_nd_free(caddr_t *nd_pparam) { ND *nd; if ((nd = (void *)(*nd_pparam)) != NULL) { if (nd->nd_tbl) kmem_free(nd->nd_tbl, nd->nd_size); kmem_free(nd, sizeof (ND)); *nd_pparam = NULL; } } static int eri_nd_getset(queue_t *q, caddr_t nd_param, MBLKP mp) { int err; IOCP iocp; MBLKP mp1; ND *nd; NDE *nde; char *valp; size_t avail; mblk_t *nmp; if (!nd_param) return (B_FALSE); nd = (void *)nd_param; iocp = (void *)mp->b_rptr; if ((iocp->ioc_count == 0) || !(mp1 = mp->b_cont)) { mp->b_datap->db_type = M_IOCACK; iocp->ioc_count = 0; iocp->ioc_error = EINVAL; return (B_TRUE); } /* * NOTE - logic throughout nd_xxx assumes single data block for ioctl. * However, existing code sends in some big buffers. */ avail = iocp->ioc_count; if (mp1->b_cont) { freemsg(mp1->b_cont); mp1->b_cont = NULL; } mp1->b_datap->db_lim[-1] = '\0'; /* Force null termination */ valp = (char *)mp1->b_rptr; for (nde = nd->nd_tbl; /* */; nde++) { if (!nde->nde_name) return (B_FALSE); if (strcmp(nde->nde_name, valp) == 0) break; } err = EINVAL; while (*valp++) ; if (!*valp || valp >= (char *)mp1->b_wptr) valp = NULL; switch (iocp->ioc_cmd) { case ND_GET: /* * (XXX) hack: "*valp" is size of user buffer for copyout. If result * of action routine is too big, free excess and return ioc_rval as buf * size needed. Return as many mblocks as will fit, free the rest. For * backward compatibility, assume size of orig ioctl buffer if "*valp" * bad or not given. */ if (valp) (void) ddi_strtol(valp, NULL, 10, (long *)&avail); /* We overwrite the name/value with the reply data */ { mblk_t *mp2 = mp1; while (mp2) { mp2->b_wptr = mp2->b_rptr; mp2 = mp2->b_cont; } } err = (*nde->nde_get_pfi)(q, mp1, nde->nde_data, iocp->ioc_cr); if (!err) { size_t size_out; ssize_t excess; iocp->ioc_rval = 0; /* Tack on the null */ err = eri_mk_mblk_tail_space(mp1, &nmp, 1); if (!err) { *nmp->b_wptr++ = '\0'; size_out = msgdsize(mp1); excess = size_out - avail; if (excess > 0) { iocp->ioc_rval = (unsigned)size_out; size_out -= excess; (void) adjmsg(mp1, -(excess + 1)); err = eri_mk_mblk_tail_space(mp1, &nmp, 1); if (!err) *nmp->b_wptr++ = '\0'; else size_out = 0; } } else size_out = 0; iocp->ioc_count = size_out; } break; case ND_SET: if (valp) { err = (*nde->nde_set_pfi)(q, mp1, valp, nde->nde_data, iocp->ioc_cr); iocp->ioc_count = 0; freemsg(mp1); mp->b_cont = NULL; } break; } iocp->ioc_error = err; mp->b_datap->db_type = M_IOCACK; return (B_TRUE); } /* * Load 'name' into the named dispatch table pointed to by 'ndp'. * 'ndp' should be the address of a char pointer cell. If the table * does not exist (*ndp == 0), a new table is allocated and 'ndp' * is stuffed. If there is not enough space in the table for a new * entry, more space is allocated. */ static boolean_t eri_nd_load(caddr_t *nd_pparam, char *name, pfi_t get_pfi, pfi_t set_pfi, caddr_t data) { ND *nd; NDE *nde; if (!nd_pparam) return (B_FALSE); if ((nd = (void *)(*nd_pparam)) == NULL) { if ((nd = (ND *)kmem_zalloc(sizeof (ND), KM_NOSLEEP)) == NULL) return (B_FALSE); *nd_pparam = (caddr_t)nd; } if (nd->nd_tbl) { for (nde = nd->nd_tbl; nde->nde_name; nde++) { if (strcmp(name, nde->nde_name) == 0) goto fill_it; } } if (nd->nd_free_count <= 1) { if ((nde = (NDE *)kmem_zalloc(nd->nd_size + NDE_ALLOC_SIZE, KM_NOSLEEP)) == NULL) return (B_FALSE); nd->nd_free_count += NDE_ALLOC_COUNT; if (nd->nd_tbl) { bcopy((char *)nd->nd_tbl, (char *)nde, nd->nd_size); kmem_free((char *)nd->nd_tbl, nd->nd_size); } else { nd->nd_free_count--; nde->nde_name = "?"; nde->nde_get_pfi = nd_get_names; nde->nde_set_pfi = nd_set_default; } nde->nde_data = (caddr_t)nd; nd->nd_tbl = nde; nd->nd_size += NDE_ALLOC_SIZE; } for (nde = nd->nd_tbl; nde->nde_name; nde++) ; nd->nd_free_count--; fill_it: nde->nde_name = name; nde->nde_get_pfi = get_pfi ? get_pfi : nd_get_default; nde->nde_set_pfi = set_pfi ? set_pfi : nd_set_default; nde->nde_data = data; return (B_TRUE); } /* * Hardening Functions * New Section */ #ifdef DEBUG /*PRINTFLIKE5*/ static void eri_debug_msg(const char *file, int line, struct eri *erip, debug_msg_t type, const char *fmt, ...) { char msg_buffer[255]; va_list ap; va_start(ap, fmt); (void) vsprintf(msg_buffer, fmt, ap); va_end(ap); if (eri_msg_out & ERI_CON_MSG) { if (((type <= eri_debug_level) && eri_debug_all) || ((type == eri_debug_level) && !eri_debug_all)) { if (erip) cmn_err(CE_CONT, "D: %s %s%d:(%s%d) %s\n", debug_msg_string[type], file, line, ddi_driver_name(erip->dip), erip->instance, msg_buffer); else cmn_err(CE_CONT, "D: %s %s(%d): %s\n", debug_msg_string[type], file, line, msg_buffer); } } } #endif /*PRINTFLIKE4*/ static void eri_fault_msg(struct eri *erip, uint_t severity, msg_t type, const char *fmt, ...) { char msg_buffer[255]; va_list ap; va_start(ap, fmt); (void) vsprintf(msg_buffer, fmt, ap); va_end(ap); if (erip == NULL) { cmn_err(CE_NOTE, "eri : %s", msg_buffer); return; } if (severity == SEVERITY_HIGH) { cmn_err(CE_WARN, "%s%d : %s", ddi_driver_name(erip->dip), erip->instance, msg_buffer); } else switch (type) { case ERI_VERB_MSG: cmn_err(CE_CONT, "?%s%d : %s", ddi_driver_name(erip->dip), erip->instance, msg_buffer); break; case ERI_LOG_MSG: cmn_err(CE_NOTE, "^%s%d : %s", ddi_driver_name(erip->dip), erip->instance, msg_buffer); break; case ERI_BUF_MSG: cmn_err(CE_NOTE, "!%s%d : %s", ddi_driver_name(erip->dip), erip->instance, msg_buffer); break; case ERI_CON_MSG: cmn_err(CE_CONT, "%s%d : %s", ddi_driver_name(erip->dip), erip->instance, msg_buffer); default: break; } } /* * Transceiver (xcvr) Functions * New Section */ /* * eri_stop_timer function is used by a function before doing link-related * processing. It locks the "linklock" to protect the link-related data * structures. This lock will be subsequently released in eri_start_timer(). */ static void eri_stop_timer(struct eri *erip) { timeout_id_t id; mutex_enter(&erip->linklock); if (erip->timerid) { erip->flags |= ERI_NOTIMEOUTS; /* prevent multiple timeout */ id = erip->timerid; erip->timerid = 0; /* prevent other thread do untimeout */ mutex_exit(&erip->linklock); /* no mutex across untimeout() */ (void) untimeout(id); mutex_enter(&erip->linklock); /* acquire mutex again */ erip->flags &= ~ERI_NOTIMEOUTS; } } /* * If msec parameter is zero, just release "linklock". */ static void eri_start_timer(struct eri *erip, fptrv_t func, clock_t msec) { if (msec) { if (!(erip->flags & ERI_NOTIMEOUTS) && (erip->flags & ERI_RUNNING)) { erip->timerid = timeout(func, (caddr_t)erip, drv_usectohz(1000*msec)); } } mutex_exit(&erip->linklock); } static int eri_new_xcvr(struct eri *erip) { int status; uint32_t cfg; int old_transceiver; if (pci_report_pmcap(erip->dip, PCI_PM_IDLESPEED, PCI_PM_IDLESPEED_NONE) == DDI_SUCCESS) erip->stats.pmcap = ERI_PMCAP_NONE; status = B_FALSE; /* no change */ cfg = GET_MIFREG(mif_cfg); ERI_DEBUG_MSG2(erip, MIF_MSG, "cfg value = %X", cfg); old_transceiver = param_transceiver; if ((cfg & ERI_MIF_CFGM1) && !use_int_xcvr) { ERI_DEBUG_MSG1(erip, PHY_MSG, "Found External XCVR"); /* * An External Transceiver was found and it takes priority * over an internal, given the use_int_xcvr flag * is false. */ if (old_transceiver != EXTERNAL_XCVR) { /* * External transceiver has just been plugged * in. Isolate the internal Transceiver. */ if (old_transceiver == INTERNAL_XCVR) { eri_mii_write(erip, ERI_PHY_BMCR, (PHY_BMCR_ISOLATE | PHY_BMCR_PWRDN | PHY_BMCR_LPBK)); } status = B_TRUE; } /* * Select the external Transceiver. */ erip->phyad = ERI_EXTERNAL_PHYAD; param_transceiver = EXTERNAL_XCVR; erip->mif_config &= ~ERI_MIF_CFGPD; erip->mif_config |= (erip->phyad << ERI_MIF_CFGPD_SHIFT); erip->mif_config |= ERI_MIF_CFGPS; PUT_MIFREG(mif_cfg, erip->mif_config); PUT_MACREG(xifc, GET_MACREG(xifc) | BMAC_XIFC_MIIBUF_OE); drv_usecwait(ERI_MIF_POLL_DELAY); } else if (cfg & ERI_MIF_CFGM0) { ERI_DEBUG_MSG1(erip, PHY_MSG, "Found Internal XCVR"); /* * An Internal Transceiver was found or the * use_int_xcvr flag is true. */ if (old_transceiver != INTERNAL_XCVR) { /* * The external transceiver has just been * disconnected or we're moving from a no * transceiver state. */ if ((old_transceiver == EXTERNAL_XCVR) && (cfg & ERI_MIF_CFGM0)) { eri_mii_write(erip, ERI_PHY_BMCR, (PHY_BMCR_ISOLATE | PHY_BMCR_PWRDN | PHY_BMCR_LPBK)); } status = B_TRUE; } /* * Select the internal transceiver. */ erip->phyad = ERI_INTERNAL_PHYAD; param_transceiver = INTERNAL_XCVR; erip->mif_config &= ~ERI_MIF_CFGPD; erip->mif_config |= (erip->phyad << ERI_MIF_CFGPD_SHIFT); erip->mif_config &= ~ERI_MIF_CFGPS; PUT_MIFREG(mif_cfg, erip->mif_config); PUT_MACREG(xifc, GET_MACREG(xifc) & ~ BMAC_XIFC_MIIBUF_OE); drv_usecwait(ERI_MIF_POLL_DELAY); } else { /* * Did not find a valid xcvr. */ ERI_FAULT_MSG1(erip, SEVERITY_NONE, ERI_VERB_MSG, "Eri_new_xcvr : Select None"); param_transceiver = NO_XCVR; erip->xcvr_status = PHY_LINK_DOWN; } if (erip->stats.pmcap == ERI_PMCAP_NONE) { if (pci_report_pmcap(erip->dip, PCI_PM_IDLESPEED, (void *)4000) == DDI_SUCCESS) erip->stats.pmcap = ERI_PMCAP_4MHZ; } return (status); } /* * This function is used for timers. No locks are held on timer expiry. */ static void eri_check_link(struct eri *erip) { link_state_t linkupdate = eri_check_link_noind(erip); if (linkupdate != LINK_STATE_UNKNOWN) mac_link_update(erip->mh, linkupdate); } /* * Compare our xcvr in our structure to the xcvr that we get from * eri_check_mii_xcvr(). If they are different then mark the * link down, reset xcvr, and return. * * Note without the MII connector, conditions can not change that * will then use a external phy, thus this code has been cleaned * to not even call the function or to possibly change the xcvr. */ static uint32_t eri_check_link_noind(struct eri *erip) { uint16_t stat, control, mif_ints; uint32_t link_timeout = ERI_LINKCHECK_TIMER; uint32_t linkupdate = 0; eri_stop_timer(erip); /* acquire linklock */ mutex_enter(&erip->xmitlock); mutex_enter(&erip->xcvrlock); eri_mif_poll(erip, MIF_POLL_STOP); (void) eri_mii_read(erip, ERI_PHY_BMSR, &stat); mif_ints = erip->mii_status ^ stat; if (erip->openloop_autoneg) { (void) eri_mii_read(erip, ERI_PHY_BMSR, &stat); ERI_DEBUG_MSG3(erip, XCVR_MSG, "eri_check_link:openloop stat %X mii_status %X", stat, erip->mii_status); (void) eri_mii_read(erip, ERI_PHY_BMCR, &control); if (!(stat & PHY_BMSR_LNKSTS) && (erip->openloop_autoneg < 2)) { if (param_speed) { control &= ~PHY_BMCR_100M; param_anlpar_100hdx = 0; param_anlpar_10hdx = 1; param_speed = 0; erip->stats.ifspeed = 10; } else { control |= PHY_BMCR_100M; param_anlpar_100hdx = 1; param_anlpar_10hdx = 0; param_speed = 1; erip->stats.ifspeed = 100; } ERI_DEBUG_MSG3(erip, XCVR_MSG, "eri_check_link: trying speed %X stat %X", param_speed, stat); erip->openloop_autoneg ++; eri_mii_write(erip, ERI_PHY_BMCR, control); link_timeout = ERI_P_FAULT_TIMER; } else { erip->openloop_autoneg = 0; linkupdate = eri_mif_check(erip, stat, stat); if (erip->openloop_autoneg) link_timeout = ERI_P_FAULT_TIMER; } eri_mif_poll(erip, MIF_POLL_START); mutex_exit(&erip->xcvrlock); mutex_exit(&erip->xmitlock); eri_start_timer(erip, eri_check_link, link_timeout); return (linkupdate); } linkupdate = eri_mif_check(erip, mif_ints, stat); eri_mif_poll(erip, MIF_POLL_START); mutex_exit(&erip->xcvrlock); mutex_exit(&erip->xmitlock); #ifdef ERI_RMAC_HANG_WORKAROUND /* * Check if rx hung. */ if ((erip->flags & ERI_RUNNING) && param_linkup) { if (erip->check_rmac_hang) { ERI_DEBUG_MSG5(erip, NONFATAL_MSG, "check1 %d: macsm:%8x wr:%2x rd:%2x", erip->check_rmac_hang, GET_MACREG(macsm), GET_ERXREG(rxfifo_wr_ptr), GET_ERXREG(rxfifo_rd_ptr)); erip->check_rmac_hang = 0; erip->check2_rmac_hang ++; erip->rxfifo_wr_ptr_c = GET_ERXREG(rxfifo_wr_ptr); erip->rxfifo_rd_ptr_c = GET_ERXREG(rxfifo_rd_ptr); eri_start_timer(erip, eri_check_link, ERI_CHECK_HANG_TIMER); return (linkupdate); } if (erip->check2_rmac_hang) { ERI_DEBUG_MSG5(erip, NONFATAL_MSG, "check2 %d: macsm:%8x wr:%2x rd:%2x", erip->check2_rmac_hang, GET_MACREG(macsm), GET_ERXREG(rxfifo_wr_ptr), GET_ERXREG(rxfifo_rd_ptr)); erip->check2_rmac_hang = 0; erip->rxfifo_wr_ptr = GET_ERXREG(rxfifo_wr_ptr); erip->rxfifo_rd_ptr = GET_ERXREG(rxfifo_rd_ptr); if (((GET_MACREG(macsm) & BMAC_OVERFLOW_STATE) == BMAC_OVERFLOW_STATE) && ((erip->rxfifo_wr_ptr_c == erip->rxfifo_rd_ptr_c) || ((erip->rxfifo_rd_ptr == erip->rxfifo_rd_ptr_c) && (erip->rxfifo_wr_ptr == erip->rxfifo_wr_ptr_c)))) { ERI_DEBUG_MSG1(erip, NONFATAL_MSG, "RX hang: Reset mac"); HSTAT(erip, rx_hang); erip->linkcheck = 1; eri_start_timer(erip, eri_check_link, ERI_LINKCHECK_TIMER); (void) eri_init(erip); return (linkupdate); } } } #endif /* * Check if tx hung. */ #ifdef ERI_TX_HUNG if ((erip->flags & ERI_RUNNING) && param_linkup && (eri_check_txhung(erip))) { HSTAT(erip, tx_hang); eri_reinit_txhung++; erip->linkcheck = 1; eri_start_timer(erip, eri_check_link, ERI_CHECK_HANG_TIMER); (void) eri_init(erip); return (linkupdate); } #endif #ifdef ERI_PM_WORKAROUND if (erip->stats.pmcap == ERI_PMCAP_NONE) { if (pci_report_pmcap(erip->dip, PCI_PM_IDLESPEED, (void *)4000) == DDI_SUCCESS) erip->stats.pmcap = ERI_PMCAP_4MHZ; ERI_DEBUG_MSG2(erip, NONFATAL_MSG, "eri_check_link: PMCAP %d", erip->stats.pmcap); } #endif if ((!param_mode) && (param_transceiver != NO_XCVR)) eri_start_timer(erip, eri_check_link, ERI_CHECK_HANG_TIMER); else eri_start_timer(erip, eri_check_link, ERI_LINKCHECK_TIMER); return (linkupdate); } static link_state_t eri_mif_check(struct eri *erip, uint16_t mif_ints, uint16_t mif_data) { uint16_t control, aner, anlpar, anar, an_common; uint16_t old_mintrans; int restart_autoneg = 0; link_state_t retv; ERI_DEBUG_MSG4(erip, XCVR_MSG, "eri_mif_check: mif_mask: %X, %X, %X", erip->mif_mask, mif_ints, mif_data); mif_ints &= ~erip->mif_mask; erip->mii_status = mif_data; /* * Now check if someone has pulled the xcvr or * a new xcvr has shown up * If so try to find out what the new xcvr setup is. */ if (((mif_ints & PHY_BMSR_RES1) && (mif_data == 0xFFFF)) || (param_transceiver == NO_XCVR)) { ERI_FAULT_MSG1(erip, SEVERITY_NONE, ERI_VERB_MSG, "No status transceiver gone"); if (eri_new_xcvr(erip)) { if (param_transceiver != NO_XCVR) { /* * Reset the new PHY and bring up the link */ (void) eri_reset_xcvr(erip); } } return (LINK_STATE_UNKNOWN); } if (param_autoneg && (mif_ints & PHY_BMSR_LNKSTS) && (mif_data & PHY_BMSR_LNKSTS) && (mif_data & PHY_BMSR_ANC)) { mif_ints |= PHY_BMSR_ANC; ERI_DEBUG_MSG3(erip, PHY_MSG, "eri_mif_check: Set ANC bit mif_data %X mig_ints %X", mif_data, mif_ints); } if ((mif_ints & PHY_BMSR_ANC) && (mif_data & PHY_BMSR_ANC)) { ERI_DEBUG_MSG1(erip, PHY_MSG, "Auto-negotiation interrupt."); /* * Switch off Auto-negotiation interrupts and switch on * Link ststus interrupts. */ erip->mif_mask |= PHY_BMSR_ANC; erip->mif_mask &= ~PHY_BMSR_LNKSTS; (void) eri_mii_read(erip, ERI_PHY_ANER, &aner); param_aner_lpancap = 1 && (aner & PHY_ANER_LPNW); if ((aner & PHY_ANER_MLF) || (eri_force_mlf)) { ERI_DEBUG_MSG1(erip, XCVR_MSG, "parallel detection fault"); /* * Consider doing open loop auto-negotiation. */ ERI_DEBUG_MSG1(erip, XCVR_MSG, "Going into Open loop Auto-neg"); (void) eri_mii_read(erip, ERI_PHY_BMCR, &control); control &= ~(PHY_BMCR_ANE | PHY_BMCR_RAN | PHY_BMCR_FDX); if (param_anar_100fdx || param_anar_100hdx) { control |= PHY_BMCR_100M; param_anlpar_100hdx = 1; param_anlpar_10hdx = 0; param_speed = 1; erip->stats.ifspeed = 100; } else if (param_anar_10fdx || param_anar_10hdx) { control &= ~PHY_BMCR_100M; param_anlpar_100hdx = 0; param_anlpar_10hdx = 1; param_speed = 0; erip->stats.ifspeed = 10; } else { ERI_FAULT_MSG1(erip, SEVERITY_NONE, ERI_VERB_MSG, "Transceiver speed set incorrectly."); return (0); } (void) eri_mii_write(erip, ERI_PHY_BMCR, control); param_anlpar_100fdx = 0; param_anlpar_10fdx = 0; param_mode = 0; erip->openloop_autoneg = 1; return (0); } (void) eri_mii_read(erip, ERI_PHY_ANLPAR, &anlpar); (void) eri_mii_read(erip, ERI_PHY_ANAR, &anar); an_common = anar & anlpar; ERI_DEBUG_MSG2(erip, XCVR_MSG, "an_common = 0x%X", an_common); if (an_common & (PHY_ANLPAR_TXFDX | PHY_ANLPAR_TX)) { param_speed = 1; erip->stats.ifspeed = 100; param_mode = 1 && (an_common & PHY_ANLPAR_TXFDX); } else if (an_common & (PHY_ANLPAR_10FDX | PHY_ANLPAR_10)) { param_speed = 0; erip->stats.ifspeed = 10; param_mode = 1 && (an_common & PHY_ANLPAR_10FDX); } else an_common = 0x0; if (!an_common) { ERI_FAULT_MSG1(erip, SEVERITY_MID, ERI_VERB_MSG, "Transceiver: anar not set with speed selection"); } param_anlpar_100T4 = 1 && (anlpar & PHY_ANLPAR_T4); param_anlpar_100fdx = 1 && (anlpar & PHY_ANLPAR_TXFDX); param_anlpar_100hdx = 1 && (anlpar & PHY_ANLPAR_TX); param_anlpar_10fdx = 1 && (anlpar & PHY_ANLPAR_10FDX); param_anlpar_10hdx = 1 && (anlpar & PHY_ANLPAR_10); ERI_DEBUG_MSG2(erip, PHY_MSG, "Link duplex = 0x%X", param_mode); ERI_DEBUG_MSG2(erip, PHY_MSG, "Link speed = 0x%X", param_speed); /* mif_ints |= PHY_BMSR_LNKSTS; prevent double msg */ /* mif_data |= PHY_BMSR_LNKSTS; prevent double msg */ } retv = LINK_STATE_UNKNOWN; if (mif_ints & PHY_BMSR_LNKSTS) { if (mif_data & PHY_BMSR_LNKSTS) { ERI_DEBUG_MSG1(erip, PHY_MSG, "Link Up"); /* * Program Lu3X31T for mininum transition */ if (eri_phy_mintrans) { eri_mii_write(erip, 31, 0x8000); (void) eri_mii_read(erip, 0, &old_mintrans); eri_mii_write(erip, 0, 0x00F1); eri_mii_write(erip, 31, 0x0000); } /* * The link is up. */ eri_init_txmac(erip); param_linkup = 1; erip->stats.link_up = LINK_STATE_UP; if (param_mode) erip->stats.link_duplex = LINK_DUPLEX_FULL; else erip->stats.link_duplex = LINK_DUPLEX_HALF; retv = LINK_STATE_UP; } else { ERI_DEBUG_MSG1(erip, PHY_MSG, "Link down."); param_linkup = 0; erip->stats.link_up = LINK_STATE_DOWN; erip->stats.link_duplex = LINK_DUPLEX_UNKNOWN; retv = LINK_STATE_DOWN; if (param_autoneg) { restart_autoneg = 1; } } } else { if (mif_data & PHY_BMSR_LNKSTS) { if (!param_linkup) { ERI_DEBUG_MSG1(erip, PHY_MSG, "eri_mif_check: MIF data link up"); /* * Program Lu3X31T for minimum transition */ if (eri_phy_mintrans) { eri_mii_write(erip, 31, 0x8000); (void) eri_mii_read(erip, 0, &old_mintrans); eri_mii_write(erip, 0, 0x00F1); eri_mii_write(erip, 31, 0x0000); } /* * The link is up. */ eri_init_txmac(erip); param_linkup = 1; erip->stats.link_up = LINK_STATE_UP; if (param_mode) erip->stats.link_duplex = LINK_DUPLEX_FULL; else erip->stats.link_duplex = LINK_DUPLEX_HALF; retv = LINK_STATE_UP; } } else if (param_linkup) { /* * The link is down now. */ ERI_DEBUG_MSG1(erip, PHY_MSG, "eri_mif_check:Link was up and went down"); param_linkup = 0; erip->stats.link_up = LINK_STATE_DOWN; erip->stats.link_duplex = LINK_DUPLEX_UNKNOWN; retv = LINK_STATE_DOWN; if (param_autoneg) restart_autoneg = 1; } } if (restart_autoneg) { /* * Restart normal auto-negotiation. */ ERI_DEBUG_MSG1(erip, PHY_MSG, "eri_mif_check:Restart AUto Negotiation"); erip->openloop_autoneg = 0; param_mode = 0; param_speed = 0; param_anlpar_100T4 = 0; param_anlpar_100fdx = 0; param_anlpar_100hdx = 0; param_anlpar_10fdx = 0; param_anlpar_10hdx = 0; param_aner_lpancap = 0; (void) eri_mii_read(erip, ERI_PHY_BMCR, &control); control |= (PHY_BMCR_ANE | PHY_BMCR_RAN); eri_mii_write(erip, ERI_PHY_BMCR, control); } if (mif_ints & PHY_BMSR_JABDET) { if (mif_data & PHY_BMSR_JABDET) { ERI_DEBUG_MSG1(erip, PHY_MSG, "Jabber detected."); HSTAT(erip, jab); /* * Reset the new PHY and bring up the link * (Check for failure?) */ (void) eri_reset_xcvr(erip); } } return (retv); } #define PHYRST_PERIOD 500 static int eri_reset_xcvr(struct eri *erip) { uint16_t stat; uint16_t anar; uint16_t control; uint16_t idr1; uint16_t idr2; uint16_t nicr; uint32_t speed_100; uint32_t speed_10; int n; #ifdef ERI_10_10_FORCE_SPEED_WORKAROUND erip->ifspeed_old = erip->stats.ifspeed; #endif /* * Reset Open loop auto-negotiation this means you can try * Normal auto-negotiation, until you get a Multiple Link fault * at which point you try 100M half duplex then 10M half duplex * until you get a Link up. */ erip->openloop_autoneg = 0; /* * Reset the xcvr. */ eri_mii_write(erip, ERI_PHY_BMCR, PHY_BMCR_RESET); /* Check for transceiver reset completion */ n = 1000; while (--n > 0) { drv_usecwait((clock_t)PHYRST_PERIOD); if (eri_mii_read(erip, ERI_PHY_BMCR, &control) == 1) { /* Transceiver does not talk MII */ ERI_FAULT_MSG1(erip, SEVERITY_NONE, ERI_VERB_MSG, "eri_reset_xcvr: no mii"); } if ((control & PHY_BMCR_RESET) == 0) goto reset_done; } ERI_FAULT_MSG2(erip, SEVERITY_NONE, ERI_VERB_MSG, "eri_reset_xcvr:reset_failed n == 0, control %x", control); goto eri_reset_xcvr_failed; reset_done: ERI_DEBUG_MSG2(erip, AUTOCONFIG_MSG, "eri_reset_xcvr: reset complete in %d us", (1000 - n) * PHYRST_PERIOD); (void) eri_mii_read(erip, ERI_PHY_BMSR, &stat); (void) eri_mii_read(erip, ERI_PHY_ANAR, &anar); (void) eri_mii_read(erip, ERI_PHY_IDR1, &idr1); (void) eri_mii_read(erip, ERI_PHY_IDR2, &idr2); ERI_DEBUG_MSG4(erip, XCVR_MSG, "eri_reset_xcvr: control %x stat %x anar %x", control, stat, anar); /* * Initialize the read only transceiver ndd information * the values are either 0 or 1. */ param_bmsr_ancap = 1 && (stat & PHY_BMSR_ACFG); param_bmsr_100T4 = 1 && (stat & PHY_BMSR_100T4); param_bmsr_100fdx = 1 && (stat & PHY_BMSR_100FDX); param_bmsr_100hdx = 1 && (stat & PHY_BMSR_100HDX); param_bmsr_10fdx = 1 && (stat & PHY_BMSR_10FDX); param_bmsr_10hdx = 1 && (stat & PHY_BMSR_10HDX); /* * Match up the ndd capabilities with the transceiver. */ param_autoneg &= param_bmsr_ancap; param_anar_100fdx &= param_bmsr_100fdx; param_anar_100hdx &= param_bmsr_100hdx; param_anar_10fdx &= param_bmsr_10fdx; param_anar_10hdx &= param_bmsr_10hdx; /* * Select the operation mode of the transceiver. */ if (param_autoneg) { /* * Initialize our auto-negotiation capabilities. */ anar = PHY_SELECTOR; if (param_anar_100T4) anar |= PHY_ANAR_T4; if (param_anar_100fdx) anar |= PHY_ANAR_TXFDX; if (param_anar_100hdx) anar |= PHY_ANAR_TX; if (param_anar_10fdx) anar |= PHY_ANAR_10FDX; if (param_anar_10hdx) anar |= PHY_ANAR_10; ERI_DEBUG_MSG2(erip, XCVR_MSG, "anar = %x", anar); eri_mii_write(erip, ERI_PHY_ANAR, anar); } /* Place the Transceiver in normal operation mode */ if ((control & PHY_BMCR_ISOLATE) || (control & PHY_BMCR_LPBK)) { control &= ~(PHY_BMCR_ISOLATE | PHY_BMCR_LPBK); eri_mii_write(erip, ERI_PHY_BMCR, (control & ~PHY_BMCR_ISOLATE)); } /* * If Lu3X31T then allow nonzero eri_phy_mintrans */ if (eri_phy_mintrans && (idr1 != 0x43 || (idr2 & 0xFFF0) != 0x7420)) { eri_phy_mintrans = 0; } /* * Initialize the mif interrupt mask. */ erip->mif_mask = (uint16_t)(~PHY_BMSR_RES1); /* * Establish link speeds and do necessary special stuff based * in the speed. */ speed_100 = param_anar_100fdx | param_anar_100hdx; speed_10 = param_anar_10fdx | param_anar_10hdx; ERI_DEBUG_MSG5(erip, XCVR_MSG, "eri_reset_xcvr: %d %d %d %d", param_anar_100fdx, param_anar_100hdx, param_anar_10fdx, param_anar_10hdx); ERI_DEBUG_MSG3(erip, XCVR_MSG, "eri_reset_xcvr: speed_100 %d speed_10 %d", speed_100, speed_10); if ((!speed_100) && (speed_10)) { erip->mif_mask &= ~PHY_BMSR_JABDET; if (!(param_anar_10fdx) && (param_anar_10hdx) && (erip->link_pulse_disabled)) { param_speed = 0; param_mode = 0; (void) eri_mii_read(erip, ERI_PHY_NICR, &nicr); nicr &= ~PHY_NICR_LD; eri_mii_write(erip, ERI_PHY_NICR, nicr); param_linkup = 1; erip->stats.link_up = LINK_STATE_UP; if (param_mode) erip->stats.link_duplex = LINK_DUPLEX_FULL; else erip->stats.link_duplex = LINK_DUPLEX_HALF; } } /* * Clear the autonegotitation before re-starting */ control = PHY_BMCR_100M | PHY_BMCR_FDX; /* eri_mii_write(erip, ERI_PHY_BMCR, control); */ if (param_autoneg) { /* * Setup the transceiver for autonegotiation. */ erip->mif_mask &= ~PHY_BMSR_ANC; /* * Clear the Auto-negotiation before re-starting */ eri_mii_write(erip, ERI_PHY_BMCR, control & ~PHY_BMCR_ANE); /* * Switch on auto-negotiation. */ control |= (PHY_BMCR_ANE | PHY_BMCR_RAN); eri_mii_write(erip, ERI_PHY_BMCR, control); } else { /* * Force the transceiver. */ erip->mif_mask &= ~PHY_BMSR_LNKSTS; /* * Switch off auto-negotiation. */ control &= ~(PHY_BMCR_FDX | PHY_BMCR_ANE | PHY_BMCR_RAN); if (speed_100) { control |= PHY_BMCR_100M; param_aner_lpancap = 0; /* Clear LP nway */ param_anlpar_10fdx = 0; param_anlpar_10hdx = 0; param_anlpar_100T4 = param_anar_100T4; param_anlpar_100fdx = param_anar_100fdx; param_anlpar_100hdx = param_anar_100hdx; param_speed = 1; erip->stats.ifspeed = 100; param_mode = param_anar_100fdx; if (param_mode) { param_anlpar_100hdx = 0; erip->stats.link_duplex = LINK_DUPLEX_FULL; } else { erip->stats.link_duplex = LINK_DUPLEX_HALF; } } else if (speed_10) { control &= ~PHY_BMCR_100M; param_aner_lpancap = 0; /* Clear LP nway */ param_anlpar_100fdx = 0; param_anlpar_100hdx = 0; param_anlpar_100T4 = 0; param_anlpar_10fdx = param_anar_10fdx; param_anlpar_10hdx = param_anar_10hdx; param_speed = 0; erip->stats.ifspeed = 10; param_mode = param_anar_10fdx; if (param_mode) { param_anlpar_10hdx = 0; erip->stats.link_duplex = LINK_DUPLEX_FULL; } else { erip->stats.link_duplex = LINK_DUPLEX_HALF; } } else { ERI_FAULT_MSG1(erip, SEVERITY_NONE, ERI_VERB_MSG, "Transceiver speed set incorrectly."); } if (param_mode) { control |= PHY_BMCR_FDX; } ERI_DEBUG_MSG4(erip, PHY_MSG, "control = %x status = %x param_mode %d", control, stat, param_mode); eri_mii_write(erip, ERI_PHY_BMCR, control); /* * if (param_mode) { * control |= PHY_BMCR_FDX; * } * control &= ~(PHY_BMCR_FDX | PHY_BMCR_ANE | PHY_BMCR_RAN); * eri_mii_write(erip, ERI_PHY_BMCR, control); */ } #ifdef DEBUG (void) eri_mii_read(erip, ERI_PHY_BMCR, &control); (void) eri_mii_read(erip, ERI_PHY_BMSR, &stat); (void) eri_mii_read(erip, ERI_PHY_ANAR, &anar); #endif ERI_DEBUG_MSG4(erip, PHY_MSG, "control %X status %X anar %X", control, stat, anar); eri_reset_xcvr_exit: return (0); eri_reset_xcvr_failed: return (1); } #ifdef ERI_10_10_FORCE_SPEED_WORKAROUND static void eri_xcvr_force_mode(struct eri *erip, uint32_t *link_timeout) { if (!param_autoneg && !param_linkup && (erip->stats.ifspeed == 10) && (param_anar_10fdx | param_anar_10hdx)) { *link_timeout = SECOND(1); return; } if (!param_autoneg && !param_linkup && (erip->ifspeed_old == 10) && (param_anar_100fdx | param_anar_100hdx)) { /* * May have to set link partner's speed and mode. */ ERI_FAULT_MSG1(erip, SEVERITY_NONE, ERI_LOG_MSG, "May have to set link partner's speed and duplex mode."); } } #endif static void eri_mif_poll(struct eri *erip, soft_mif_enable_t enable) { if (enable == MIF_POLL_START) { if (erip->mifpoll_enable && !erip->openloop_autoneg) { erip->mif_config |= ERI_MIF_CFGPE; PUT_MIFREG(mif_cfg, erip->mif_config); drv_usecwait(ERI_MIF_POLL_DELAY); PUT_GLOBREG(intmask, GET_GLOBREG(intmask) & ~ERI_G_MASK_MIF_INT); PUT_MIFREG(mif_imask, erip->mif_mask); } } else if (enable == MIF_POLL_STOP) { erip->mif_config &= ~ERI_MIF_CFGPE; PUT_MIFREG(mif_cfg, erip->mif_config); drv_usecwait(ERI_MIF_POLL_DELAY); PUT_GLOBREG(intmask, GET_GLOBREG(intmask) | ERI_G_MASK_MIF_INT); PUT_MIFREG(mif_imask, ERI_MIF_INTMASK); } ERI_DEBUG_MSG2(erip, XCVR_MSG, "MIF Config = 0x%X", GET_MIFREG(mif_cfg)); ERI_DEBUG_MSG2(erip, XCVR_MSG, "MIF imask = 0x%X", GET_MIFREG(mif_imask)); ERI_DEBUG_MSG2(erip, XCVR_MSG, "INT imask = 0x%X", GET_GLOBREG(intmask)); ERI_DEBUG_MSG1(erip, XCVR_MSG, "<== mif_poll"); } /* Decide if transmitter went dead and reinitialize everything */ #ifdef ERI_TX_HUNG static int eri_txhung_limit = 2; static int eri_check_txhung(struct eri *erip) { boolean_t macupdate = B_FALSE; mutex_enter(&erip->xmitlock); if (erip->flags & ERI_RUNNING) erip->tx_completion = (uint32_t)(GET_ETXREG(tx_completion) & ETX_COMPLETION_MASK); macupdate |= eri_reclaim(erip, erip->tx_completion); /* Something needs to be sent out but it is not going out */ if ((erip->tcurp != erip->tnextp) && (erip->stats.opackets64 == erip->erisave.reclaim_opackets) && (erip->stats.collisions == erip->erisave.starts)) erip->txhung++; else erip->txhung = 0; erip->erisave.reclaim_opackets = erip->stats.opackets64; erip->erisave.starts = erip->stats.collisions; mutex_exit(&erip->xmitlock); if (macupdate) mac_tx_update(erip->mh); return (erip->txhung >= eri_txhung_limit); } #endif