/* * * O.S : Solaris * FILE NAME : arcmsr.h * BY : Erich Chen * Description: SCSI RAID Device Driver for * ARECA RAID Host adapter * *************************************************************************** * Copyright (C) 2002,2007 Areca Technology Corporation All rights reserved. * Copyright (C) 2002,2007 Erich Chen * Web site: www.areca.com.tw * E-mail: erich@areca.com.tw * *********************************************************************** * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The party using or redistributing the source code and binary forms * agrees to the disclaimer below and the terms and conditions set forth * herein. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * ************************************************************************* */ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _SYS_SCSI_ADAPTERS_ARCMSR_H #define _SYS_SCSI_ADAPTERS_ARCMSR_H #ifdef __cplusplus extern "C" { #endif #include #ifndef TRUE #define TRUE 1 #define FALSE 0 #endif #ifdef DEBUG #define ARCMSR_DEBUG 1 #endif /* DEBUG */ #define ARCMSR_DRIVER_VERSION "1.20.00.17Sun" #define ARCMSR_SCSI_INITIATOR_ID 255 #define ARCMSR_DEV_SECTOR_SIZE 512 #define ARCMSR_MAX_XFER_SECTORS 256 #define ARCMSR_MAX_SG_ENTRIES 38 /* max 38 */ #define ARCMSR_MAX_XFER_LEN 0x00200000 /* 2M */ #define ARCMSR_MAX_TARGETID 17 /* 0-16 */ #define ARCMSR_MAX_TARGETLUN 8 /* 0-7 */ #define ARCMSR_MAX_DPC 16 /* defer procedure call */ #define ARCMSR_MAX_QBUFFER 4096 /* ioctl QBUFFER */ #define ARCMSR_MAX_ADAPTER 4 /* limitation due to pci-e slots */ #define ARCMSR_MAX_HBB_POSTQUEUE 264 /* ARCMSR_MAX_OUTSTANDING_CMD+8 */ #define ARCMSR_MAX_OUTSTANDING_CMD 256 #define ARCMSR_MAX_FREECCB_NUM 320 #define CHIP_REG_READ8(handle, a) \ (ddi_get8(handle, (uint8_t *)(a))) #define CHIP_REG_READ16(handle, a) \ (ddi_get16(handle, (uint16_t *)(a))) #define CHIP_REG_READ32(handle, a) \ (ddi_get32(handle, (uint32_t *)(a))) #define CHIP_REG_READ64(handle, a) \ (ddi_get64(handle, (uint64_t *)(a))) #define CHIP_REG_WRITE8(handle, a, d) \ ddi_put8(handle, (uint8_t *)(a), (uint8_t)(d)) #define CHIP_REG_WRITE16(handle, a, d) \ ddi_put16(handle, (uint16_t *)(a), (uint16_t)(d)) #define CHIP_REG_WRITE32(handle, a, d) \ ddi_put32(handle, (uint32_t *)(a), (uint32_t)(d)) #define CHIP_REG_WRITE64(handle, a, d) \ ddi_put64(handle, (uint64_t *)(a), (uint64_t)(d)) #define ARCOFFSET(type, member) \ ((size_t)(&((type *)0)->member)) #define PCI_VENDOR_ID_ARECA 0x17D3 /* Vendor ID */ #define PCI_DEVICE_ID_ARECA_1110 0x1110 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1120 0x1120 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1130 0x1130 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1160 0x1160 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1170 0x1170 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1210 0x1210 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1220 0x1220 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1230 0x1230 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1260 0x1260 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1270 0x1270 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1280 0x1280 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1380 0x1380 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1381 0x1381 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1680 0x1680 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1681 0x1681 /* Device ID */ #define PCI_DEVICE_ID_ARECA_1201 0x1201 /* Device ID */ #define dma_addr_hi32(addr) (uint32_t)((addr>>16)>>16) #define dma_addr_lo32(addr) (uint32_t)(addr & 0xffffffff) /* * IOCTL CONTROL CODE */ struct CMD_MESSAGE { uint32_t HeaderLength; uint8_t Signature[8]; uint32_t Timeout; uint32_t ControlCode; uint32_t ReturnCode; uint32_t Length; }; #define MSGDATABUFLEN 224 struct CMD_MESSAGE_FIELD { struct CMD_MESSAGE cmdmessage; /* 28 byte ioctl header */ uint8_t messagedatabuffer[224]; /* 1032 */ /* areca gui program does not accept more than 1031 byte */ }; /* IOP message transfer */ #define ARCMSR_MESSAGE_FAIL 0x0001 /* error code for StorPortLogError,ScsiPortLogError */ #define ARCMSR_IOP_ERROR_ILLEGALPCI 0x0001 #define ARCMSR_IOP_ERROR_VENDORID 0x0002 #define ARCMSR_IOP_ERROR_DEVICEID 0x0002 #define ARCMSR_IOP_ERROR_ILLEGALCDB 0x0003 #define ARCMSR_IOP_ERROR_UNKNOW_CDBERR 0x0004 #define ARCMSR_SYS_ERROR_MEMORY_ALLOCATE 0x0005 #define ARCMSR_SYS_ERROR_MEMORY_CROSS4G 0x0006 #define ARCMSR_SYS_ERROR_MEMORY_LACK 0x0007 #define ARCMSR_SYS_ERROR_MEMORY_RANGE 0x0008 #define ARCMSR_SYS_ERROR_DEVICE_BASE 0x0009 #define ARCMSR_SYS_ERROR_PORT_VALIDATE 0x000A /* DeviceType */ #define ARECA_SATA_RAID 0x90000000 /* FunctionCode */ #define FUNCTION_READ_RQBUFFER 0x0801 #define FUNCTION_WRITE_WQBUFFER 0x0802 #define FUNCTION_CLEAR_RQBUFFER 0x0803 #define FUNCTION_CLEAR_WQBUFFER 0x0804 #define FUNCTION_CLEAR_ALLQBUFFER 0x0805 #define FUNCTION_REQUEST_RETURN_CODE_3F 0x0806 #define FUNCTION_SAY_HELLO 0x0807 #define FUNCTION_SAY_GOODBYE 0x0808 #define FUNCTION_FLUSH_ADAPTER_CACHE 0x0809 /* ARECA IO CONTROL CODE */ #define ARCMSR_MESSAGE_READ_RQBUFFER \ ARECA_SATA_RAID | FUNCTION_READ_RQBUFFER #define ARCMSR_MESSAGE_WRITE_WQBUFFER \ ARECA_SATA_RAID | FUNCTION_WRITE_WQBUFFER #define ARCMSR_MESSAGE_CLEAR_RQBUFFER \ ARECA_SATA_RAID | FUNCTION_CLEAR_RQBUFFER #define ARCMSR_MESSAGE_CLEAR_WQBUFFER \ ARECA_SATA_RAID | FUNCTION_CLEAR_WQBUFFER #define ARCMSR_MESSAGE_CLEAR_ALLQBUFFER \ ARECA_SATA_RAID | FUNCTION_CLEAR_ALLQBUFFER #define ARCMSR_MESSAGE_REQUEST_RETURN_CODE_3F \ ARECA_SATA_RAID | FUNCTION_REQUEST_RETURN_CODE_3F #define ARCMSR_MESSAGE_SAY_HELLO \ ARECA_SATA_RAID | FUNCTION_SAY_HELLO #define ARCMSR_MESSAGE_SAY_GOODBYE \ ARECA_SATA_RAID | FUNCTION_SAY_GOODBYE #define ARCMSR_MESSAGE_FLUSH_ADAPTER_CACHE \ ARECA_SATA_RAID | FUNCTION_FLUSH_ADAPTER_CACHE /* ARECA IOCTL ReturnCode */ #define ARCMSR_MESSAGE_RETURNCODE_OK 0x00000001 #define ARCMSR_MESSAGE_RETURNCODE_ERROR 0x00000006 #define ARCMSR_MESSAGE_RETURNCODE_3F 0x0000003F /* * SPEC. for Areca HBB adapter */ /* ARECA HBB COMMAND for its FIRMWARE */ /* window of "instruction flags" from driver to iop */ #define ARCMSR_DRV2IOP_DOORBELL 0x00020400 #define ARCMSR_DRV2IOP_DOORBELL_MASK 0x00020404 /* window of "instruction flags" from iop to driver */ #define ARCMSR_IOP2DRV_DOORBELL 0x00020408 #define ARCMSR_IOP2DRV_DOORBELL_MASK 0x0002040C /* ARECA FLAG LANGUAGE */ #define ARCMSR_IOP2DRV_DATA_WRITE_OK 0x00000001 /* ioctl xfer */ #define ARCMSR_IOP2DRV_DATA_READ_OK 0x00000002 /* ioctl xfer */ #define ARCMSR_IOP2DRV_CDB_DONE 0x00000004 #define ARCMSR_IOP2DRV_MESSAGE_CMD_DONE 0x00000008 #define ARCMSR_DOORBELL_HANDLE_INT 0x0000000F #define ARCMSR_DOORBELL_INT_CLEAR_PATTERN 0xFF00FFF0 #define ARCMSR_MESSAGE_INT_CLEAR_PATTERN 0xFF00FFF7 /* (ARCMSR_INBOUND_MESG0_GET_CONFIG<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */ #define ARCMSR_MESSAGE_GET_CONFIG 0x00010008 /* (ARCMSR_INBOUND_MESG0_SET_CONFIG<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */ #define ARCMSR_MESSAGE_SET_CONFIG 0x00020008 /* (ARCMSR_INBOUND_MESG0_ABORT_CMD<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */ #define ARCMSR_MESSAGE_ABORT_CMD 0x00030008 /* (ARCMSR_INBOUND_MESG0_STOP_BGRB<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */ #define ARCMSR_MESSAGE_STOP_BGRB 0x00040008 /* (ARCMSR_INBOUND_MESG0_FLUSH_CACHE<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */ #define ARCMSR_MESSAGE_FLUSH_CACHE 0x00050008 /* (ARCMSR_INBOUND_MESG0_START_BGRB<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */ #define ARCMSR_MESSAGE_START_BGRB 0x00060008 #define ARCMSR_MESSAGE_START_DRIVER_MODE 0x000E0008 #define ARCMSR_MESSAGE_SET_POST_WINDOW 0x000F0008 #define ARCMSR_MESSAGE_ACTIVE_EOI_MODE 0x00100008 /* ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK */ #define ARCMSR_MESSAGE_FIRMWARE_OK 0x80000000 #define ARCMSR_DRV2IOP_DATA_WRITE_OK 0x00000001 /* ioctl xfer */ #define ARCMSR_DRV2IOP_DATA_READ_OK 0x00000002 /* ioctl xfer */ #define ARCMSR_DRV2IOP_CDB_POSTED 0x00000004 #define ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED 0x00000008 #define ARCMSR_DRV2IOP_END_OF_INTERRUPT 0x00000010 /* data tunnel buffer between user space program and its firmware */ /* iop msgcode_rwbuffer for message command */ #define ARCMSR_MSGCODE_RWBUFFER 0x0000fa00 /* user space data to iop 128bytes */ #define ARCMSR_IOCTL_WBUFFER 0x0000fe00 /* iop data to user space 128bytes */ #define ARCMSR_IOCTL_RBUFFER 0x0000ff00 #define ARCMSR_HBB_BASE0_OFFSET 0x00000010 #define ARCMSR_HBB_BASE1_OFFSET 0x00000018 #define ARCMSR_HBB_BASE0_LEN 0x00021000 #define ARCMSR_HBB_BASE1_LEN 0x00010000 /* * structure for holding DMA address data */ #define IS_SG64_ADDR 0x01000000 /* bit24 */ /* 32bit Scatter-Gather list */ struct SG32ENTRY { /* bit 24 = 0, high 8 bit = flag, low 24 bit = length */ uint32_t length; uint32_t address; }; /* 64bit Scatter-Gather list */ struct SG64ENTRY { /* bit 24 = 1, high 8 bit = flag, low 24 bit = length */ uint32_t length; uint32_t address; uint32_t addresshigh; }; struct QBUFFER { uint32_t data_len; uint8_t data[124]; }; /* * FIRMWARE INFO */ #define ARCMSR_FW_MODEL_OFFSET 0x0f #define ARCMSR_FW_VERS_OFFSET 0x11 #define ARCMSR_FW_MAP_OFFSET 0x15 struct FIRMWARE_INFO { uint32_t signature; uint32_t request_len; uint32_t numbers_queue; uint32_t sdram_size; uint32_t ide_channels; char vendor[40]; char model[8]; char firmware_ver[16]; char device_map[16]; }; /* * ARECA FIRMWARE SPEC * * Usage of IOP331 adapter * * (All In/Out is in IOP331's view) * 1. Message 0 --> InitThread message and retrun code * 2. Doorbell is used for RS-232 emulation * InDoorBell : * bit0 -- data in ready (DRIVER DATA WRITE OK) * bit1 -- data out has been read * (DRIVER DATA READ OK) * outDoorBell: * bit0 -- data out ready (IOP331 DATA WRITE OK) * bit1 -- data in has been read * (IOP331 DATA READ OK) * 3. Index Memory Usage * offset 0xf00 : for RS232 out (request buffer) * offset 0xe00 : for RS232 in (scratch buffer) * offset 0xa00 : for inbound message code msgcode_rwbuffer * (driver send to IOP331) * offset 0xa00 : for outbound message code msgcode_rwbuffer * (IOP331 send to driver) * 4. RS-232 emulation * Currently 128 byte buffer is used: * 1st uint32_t : Data length (1--124) * Byte 4--127 : Max 124 bytes of data * 5. PostQ * All SCSI Command must be sent through postQ: * (inbound queue port) Request frame must be 32 bytes aligned * # bits 31:27 => flag for post ccb * # bits 26:00 => real address (bit 31:27) of post arcmsr_cdb * bit31 : 0 : 256 bytes frame * 1 : 512 bytes frame * bit30 : 0 : normal request * 1 : BIOS request * bit29 : reserved * bit28 : reserved * bit27 : reserved * ----------------------------------------------------------------------- * (outbount queue port) Request reply * # bits 31:27 => flag for reply * # bits 26:00 => real address (bits 31:27) of reply arcmsr_cdb * # bit31 : must be 0 (for this type of reply) * # bit30 : reserved for BIOS handshake * # bit29 : reserved * # bit28 : 0 : no error, ignore AdapStatus/DevStatus/SenseData * 1 : Error, see in AdapStatus/DevStatus/SenseData * # bit27 : reserved * 6. BIOS request * All BIOS request is the same with request from PostQ * Except : * Request frame is sent from configuration space * offset: 0x78 : Request Frame (bit30 == 1) * offset: 0x18 : writeonly to generate IRQ to IOP331 * Completion of request: * (bit30 == 0, bit28==err flag) * 7. Definition of SGL entry (structure) * 8. Message1 Out - Diag Status Code (????) * 9. Message0 message code : * 0x00 : NOP * 0x01 : Get Config ->offset 0xa00 * : for outbound message code msgcode_rwbuffer * (IOP331 send to driver) * Signature 0x87974060(4) * Request len 0x00000200(4) * numbers of queue 0x00000100(4) * SDRAM Size 0x00000100(4)-->256 MB * IDE Channels 0x00000008(4) * vendor 40 bytes char * model 8 bytes char * FirmVer 16 bytes char * Device Map 16 bytes char * * FirmwareVersion DWORD * <== Added for checking of new firmware capability * 0x02 : Set Config ->offset 0xa00 * :for inbound message code msgcode_rwbuffer * (driver send to IOP331) * Signature 0x87974063(4) * UPPER32 of Request Frame (4)-->Driver Only * 0x03 : Reset (Abort all queued Command) * 0x04 : Stop Background Activity * 0x05 : Flush Cache * 0x06 : Start Background Activity * (re-start if background is halted) * 0x07 : Check If Host Command Pending * (Novell May Need This Function) * 0x08 : Set controller time ->offset 0xa00 (driver to IOP331) * : for inbound message code msgcode_rwbuffer * byte 0 : 0xaa <-- signature * byte 1 : 0x55 <-- signature * byte 2 : year (04) * byte 3 : month (1..12) * byte 4 : date (1..31) * byte 5 : hour (0..23) * byte 6 : minute (0..59) * byte 7 : second (0..59) * */ /* signature of set and get firmware config */ #define ARCMSR_SIGNATURE_GET_CONFIG 0x87974060 #define ARCMSR_SIGNATURE_SET_CONFIG 0x87974063 /* message code of inbound message register */ #define ARCMSR_INBOUND_MESG0_NOP 0x00000000 #define ARCMSR_INBOUND_MESG0_GET_CONFIG 0x00000001 #define ARCMSR_INBOUND_MESG0_SET_CONFIG 0x00000002 #define ARCMSR_INBOUND_MESG0_ABORT_CMD 0x00000003 #define ARCMSR_INBOUND_MESG0_STOP_BGRB 0x00000004 #define ARCMSR_INBOUND_MESG0_FLUSH_CACHE 0x00000005 #define ARCMSR_INBOUND_MESG0_START_BGRB 0x00000006 #define ARCMSR_INBOUND_MESG0_CHK331PENDING 0x00000007 #define ARCMSR_INBOUND_MESG0_SYNC_TIMER 0x00000008 /* doorbell interrupt generator */ #define ARCMSR_INBOUND_DRIVER_DATA_WRITE_OK 0x00000001 #define ARCMSR_INBOUND_DRIVER_DATA_READ_OK 0x00000002 #define ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK 0x00000001 #define ARCMSR_OUTBOUND_IOP331_DATA_READ_OK 0x00000002 /* ccb areca cdb flag */ #define ARCMSR_CCBPOST_FLAG_SGL_BSIZE 0x80000000 #define ARCMSR_CCBPOST_FLAG_IAM_BIOS 0x40000000 #define ARCMSR_CCBREPLY_FLAG_IAM_BIOS 0x40000000 #define ARCMSR_CCBREPLY_FLAG_ERROR 0x10000000 /* outbound firmware ok */ #define ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK 0x80000000 /* SBus dma burst sizes */ #ifndef BURSTSIZE #define BURSTSIZE #define BURST1 0x01 #define BURST2 0x02 #define BURST4 0x04 #define BURST8 0x08 #define BURST16 0x10 #define BURST32 0x20 #define BURST64 0x40 #define BURSTSIZE_MASK 0x7f #define DEFAULT_BURSTSIZE BURST16|BURST8|BURST4|BURST2|BURST1 #endif /* BURSTSIZE */ /* * */ struct ARCMSR_CDB { uint8_t Bus; /* should be 0 */ uint8_t TargetID; /* should be 0..15 */ uint8_t LUN; /* should be 0..7 */ uint8_t Function; /* should be 1 */ uint8_t CdbLength; /* set in arcmsr_tran_init_pkt */ uint8_t sgcount; uint8_t Flags; /* bit 0: 0(256) / 1(512) bytes */ #define ARCMSR_CDB_FLAG_SGL_BSIZE 0x01 /* bit 1: 0(from driver) / 1(from BIOS) */ #define ARCMSR_CDB_FLAG_BIOS 0x02 /* bit 2: 0(Data in) / 1(Data out) */ #define ARCMSR_CDB_FLAG_WRITE 0x04 /* bit 4/3 ,00 : simple Q,01 : head of Q,10 : ordered Q */ #define ARCMSR_CDB_FLAG_SIMPLEQ 0x00 #define ARCMSR_CDB_FLAG_HEADQ 0x08 #define ARCMSR_CDB_FLAG_ORDEREDQ 0x10 uint8_t Reserved1; uint32_t Context; /* Address of this request */ uint32_t DataLength; /* currently unused */ uint8_t Cdb[16]; /* SCSI CDB */ /* * Device Status : the same from SCSI bus if error occur * SCSI bus status codes. */ uint8_t DeviceStatus; #define SCSISTAT_GOOD 0x00 #define SCSISTAT_CHECK_CONDITION 0x02 #define SCSISTAT_CONDITION_MET 0x04 #define SCSISTAT_BUSY 0x08 #define SCSISTAT_INTERMEDIATE 0x10 #define SCSISTAT_INTERMEDIATE_COND_MET 0x14 #define SCSISTAT_RESERVATION_CONFLICT 0x18 #define SCSISTAT_COMMAND_TERMINATED 0x22 #define SCSISTAT_QUEUE_FULL 0x28 #define ARCMSR_DEV_SELECT_TIMEOUT 0xF0 #define ARCMSR_DEV_ABORTED 0xF1 #define ARCMSR_DEV_INIT_FAIL 0xF2 uint8_t SenseData[15]; /* Scatter gather address */ union { struct SG32ENTRY sg32entry[ARCMSR_MAX_SG_ENTRIES]; struct SG64ENTRY sg64entry[ARCMSR_MAX_SG_ENTRIES]; } sgu; }; struct HBA_msgUnit { uint32_t resrved0[4]; uint32_t inbound_msgaddr0; uint32_t inbound_msgaddr1; uint32_t outbound_msgaddr0; uint32_t outbound_msgaddr1; uint32_t inbound_doorbell; uint32_t inbound_intstatus; uint32_t inbound_intmask; uint32_t outbound_doorbell; uint32_t outbound_intstatus; uint32_t outbound_intmask; uint32_t reserved1[2]; uint32_t inbound_queueport; uint32_t outbound_queueport; uint32_t reserved2[2]; /* ......local_buffer */ uint32_t reserved3[492]; uint32_t reserved4[128]; uint32_t msgcode_rwbuffer[256]; uint32_t message_wbuffer[32]; uint32_t reserved5[32]; uint32_t message_rbuffer[32]; uint32_t reserved6[32]; }; struct HBB_DOORBELL { uint8_t doorbell_reserved[132096]; /* * offset 0x00020400:00,01,02,03: window of "instruction flags" * from driver to iop */ uint32_t drv2iop_doorbell; /* 04,05,06,07: doorbell mask */ uint32_t drv2iop_doorbell_mask; /* 08,09,10,11: window of "instruction flags" from iop to driver */ uint32_t iop2drv_doorbell; /* 12,13,14,15: doorbell mask */ uint32_t iop2drv_doorbell_mask; }; struct HBB_RWBUFFER { uint8_t message_reserved0[64000]; /* offset 0x0000fa00: 0..1023: message code read write 1024bytes */ uint32_t msgcode_rwbuffer[256]; /* offset 0x0000fe00:1024...1151: user space data to iop 128bytes */ uint32_t message_wbuffer[32]; /* 1152...1279: message reserved */ uint32_t message_reserved1[32]; /* offset 0x0000ff00:1280...1407: iop data to user space 128bytes */ uint32_t message_rbuffer[32]; }; struct HBB_msgUnit { /* post queue buffer for iop */ uint32_t post_qbuffer[ARCMSR_MAX_HBB_POSTQUEUE]; /* done queue buffer for iop */ uint32_t done_qbuffer[ARCMSR_MAX_HBB_POSTQUEUE]; int32_t postq_index; /* post queue index */ int32_t doneq_index; /* done queue index */ struct HBB_DOORBELL *hbb_doorbell; struct HBB_RWBUFFER *hbb_rwbuffer; }; struct msgUnit { union { struct HBA_msgUnit hbamu; struct HBB_msgUnit hbbmu; } muu; }; /* * Adapter Control Block */ struct ACB { uint32_t adapter_type; /* A/B/C/D */ #define ACB_ADAPTER_TYPE_A 0x00000001 /* hba (Intel) IOP */ #define ACB_ADAPTER_TYPE_B 0x00000002 /* hbb (Marvell) IOP */ #define ACB_ADAPTER_TYPE_C 0x00000004 /* hbc P IOP */ #define ACB_ADAPTER_TYPE_D 0x00000008 /* hbd A IOP */ int32_t dma_sync_size; scsi_hba_tran_t *scsi_hba_transport; dev_info_t *dev_info; ddi_acc_handle_t reg_mu_acc_handle0; ddi_acc_handle_t reg_mu_acc_handle1; ddi_acc_handle_t ccbs_acc_handle; ddi_dma_handle_t ccbs_pool_handle; ddi_dma_cookie_t ccb_cookie; ddi_device_acc_attr_t dev_acc_attr; kmutex_t acb_mutex; kmutex_t postq_mutex; kmutex_t workingQ_mutex; kmutex_t ioctl_mutex; timeout_id_t timeout_id; timeout_id_t timeout_sc_id; ddi_taskq_t *taskq; ddi_iblock_cookie_t iblock_cookie; /* Offset for arc cdb physical to virtual calculations */ unsigned long vir2phy_offset; uint32_t outbound_int_enable; /* message unit ATU inbound base address0 virtual */ struct msgUnit *pmu; uint8_t adapter_index; uint8_t irq; uint16_t acb_flags; #define ACB_F_SCSISTOPADAPTER 0x0001 /* stop RAID background rebuild */ #define ACB_F_MSG_STOP_BGRB 0x0002 /* stop RAID background rebuild */ #define ACB_F_MSG_START_BGRB 0x0004 /* iop ioctl data rqbuffer overflow */ #define ACB_F_IOPDATA_OVERFLOW 0x0008 /* ioctl clear wqbuffer */ #define ACB_F_MESSAGE_WQBUFFER_CLEARED 0x0010 /* ioctl clear rqbuffer */ #define ACB_F_MESSAGE_RQBUFFER_CLEARED 0x0020 /* ioctl iop wqbuffer data readed */ #define ACB_F_MESSAGE_WQBUFFER_READ 0x0040 #define ACB_F_BUS_RESET 0x0080 /* iop init */ #define ACB_F_IOP_INITED 0x0100 /* serial ccb pointer array */ struct CCB *pccb_pool[ARCMSR_MAX_FREECCB_NUM]; /* working ccb pointer array */ struct CCB *ccbworkingQ[ARCMSR_MAX_FREECCB_NUM]; /* done ccb array index */ int32_t workingccb_doneindex; /* start ccb array index */ int32_t workingccb_startindex; int32_t ccboutstandingcount; /* data collection buffer for read from 80331 */ uint8_t rqbuffer[ARCMSR_MAX_QBUFFER]; /* first of read buffer */ int32_t rqbuf_firstidx; /* last of read buffer */ int32_t rqbuf_lastidx; /* data collection buffer for write to 80331 */ uint8_t wqbuffer[ARCMSR_MAX_QBUFFER]; /* first of write buffer */ int32_t wqbuf_firstidx; /* last of write buffer */ int32_t wqbuf_lastidx; /* id0 ..... id15,lun0...lun7 */ uint8_t devstate[ARCMSR_MAX_TARGETID][ARCMSR_MAX_TARGETLUN]; #define ARECA_RAID_GONE 0x55 #define ARECA_RAID_GOOD 0xaa uint32_t timeout_count; uint32_t num_resets; uint32_t num_aborts; uint32_t firm_request_len; uint32_t firm_numbers_queue; uint32_t firm_sdram_size; uint32_t firm_ide_channels; char firm_model[12]; char firm_version[20]; char device_map[20]; /* 21,84-99 */ ddi_acc_handle_t pci_acc_handle; int tgt_scsi_opts[ARCMSR_MAX_TARGETID]; dev_info_t *ld[ARCMSR_MAX_TARGETID-1][ARCMSR_MAX_TARGETLUN]; }; /* * Command Control Block (SrbExtension) * * CCB must be not cross page boundary,and the order from offset 0 * structure describing an ATA disk request this CCB length must be * 32 bytes boundary * */ struct CCB { struct ARCMSR_CDB arcmsr_cdb; uint32_t cdb_shifted_phyaddr; uint16_t ccb_flags; #define CCB_FLAG_READ 0x0000 #define CCB_FLAG_WRITE 0x0001 #define CCB_FLAG_ERROR 0x0002 #define CCB_FLAG_FLUSHCACHE 0x0004 #define CCB_FLAG_MASTER_ABORTED 0x0008 #define CCB_FLAG_DMAVALID 0x0010 #define CCB_FLAG_DMACONSISTENT 0x0020 #define CCB_FLAG_DMAWRITE 0x0040 #define CCB_FLAG_PKTBIND 0x0080 uint16_t startdone; #define ARCMSR_CCB_DONE 0x0000 #define ARCMSR_CCB_UNBUILD 0x0000 #define ARCMSR_CCB_START 0x55AA #define ARCMSR_CCB_PENDING 0xAA55 #define ARCMSR_CCB_RESET 0xA5A5 #define ARCMSR_CCB_ABORTED 0x5A5A #define ARCMSR_CCB_ILLEGAL 0xFFFF struct scsi_pkt *pkt; struct ACB *acb; ddi_dma_cookie_t pkt_dmacookies[ARCMSR_MAX_SG_ENTRIES]; ddi_dma_handle_t pkt_dma_handle; uint_t pkt_cookie; uint_t pkt_ncookies; uint_t pkt_nwin; uint_t pkt_curwin; off_t pkt_dma_offset; size_t pkt_dma_len; size_t total_dmac_size; time_t ccb_time; struct buf *bp; ddi_dma_cookie_t resid_dmacookie; #ifdef _LP64 uint32_t reserved; #endif }; /* SenseData[15] */ struct SENSE_DATA { DECL_BITFIELD3( ErrorCode :4, /* Vendor Unique error code */ ErrorClass :3, /* Error Class- fixed at 0x7 */ Valid :1); /* sense data is valid */ uint8_t SegmentNumber; /* segment number: for COPY cmd */ DECL_BITFIELD5( SenseKey :4, /* Sense key (see below) */ Reserved :1, /* reserved */ IncorrectLength :1, /* Incorrect Length Indicator */ EndOfMedia :1, /* End of Media */ FileMark :1); /* File Mark Detected */ uint8_t Information[4]; uint8_t AdditionalSenseLength; uint8_t CommandSpecificInformation[4]; uint8_t AdditionalSenseCode; uint8_t AdditionalSenseCodeQualifier; uint8_t FieldReplaceableUnitCode; }; #define VIDLEN 8 #define PIDLEN 16 #define REVLEN 4 struct SCSIInqData { uint8_t DevType; /* Periph Qualifier & Periph Dev Type */ uint8_t RMB_TypeMod; /* rem media bit & Dev Type Modifier */ uint8_t Vers; /* ISO, ECMA, & ANSI versions */ uint8_t RDF; /* AEN, TRMIOP, & response data format */ uint8_t AddLen; /* length of additional data */ uint8_t Res1; /* reserved */ uint8_t Res2; /* reserved */ uint8_t Flags; /* RelADr, Wbus32, Wbus16, Sync etc */ uint8_t VendorID[8]; /* Vendor Identification */ uint8_t ProductID[16]; /* Product Identification */ uint8_t ProductRev[4]; /* Product Revision */ }; /* * These definitions are the register offsets as defined in the Intel * IOP manuals. See (correct as of 18 January 2008) * http://developer.intel.com/design/iio/index.htm?iid=ncdcnav2+stor_ioproc * for more details */ #define ARCMSR_PCI2PCI_VENDORID_REG 0x00 #define ARCMSR_PCI2PCI_DEVICEID_REG 0x02 #define ARCMSR_PCI2PCI_PRIMARY_COMMAND_REG 0x04 #define PCI_DISABLE_INTERRUPT 0x0400 #define ARCMSR_PCI2PCI_PRIMARY_STATUS_REG 0x06 #define ARCMSR_ADAP_66MHZ 0x20 #define ARCMSR_PCI2PCI_REVISIONID_REG 0x08 #define ARCMSR_PCI2PCI_CLASSCODE_REG 0x09 #define ARCMSR_PCI2PCI_PRIMARY_CACHELINESIZE_REG 0x0C #define ARCMSR_PCI2PCI_PRIMARY_LATENCYTIMER_REG 0x0D #define ARCMSR_PCI2PCI_HEADERTYPE_REG 0x0E #define ARCMSR_PCI2PCI_PRIMARY_BUSNUMBER_REG 0x18 #define ARCMSR_PCI2PCI_SECONDARY_BUSNUMBER_REG 0x19 #define ARCMSR_PCI2PCI_SUBORDINATE_BUSNUMBER_REG 0x1A #define ARCMSR_PCI2PCI_SECONDARY_LATENCYTIMER_REG 0x1B #define ARCMSR_PCI2PCI_IO_BASE_REG 0x1C #define ARCMSR_PCI2PCI_IO_LIMIT_REG 0x1D #define ARCMSR_PCI2PCI_SECONDARY_STATUS_REG 0x1E #define ARCMSR_PCI2PCI_NONPREFETCHABLE_MEMORY_BASE_REG 0x20 #define ARCMSR_PCI2PCI_NONPREFETCHABLE_MEMORY_LIMIT_REG 0x22 #define ARCMSR_PCI2PCI_PREFETCHABLE_MEMORY_BASE_REG 0x24 #define ARCMSR_PCI2PCI_PREFETCHABLE_MEMORY_LIMIT_REG 0x26 #define ARCMSR_PCI2PCI_PREFETCHABLE_MEMORY_BASE_UPPER32_REG 0x28 #define ARCMSR_PCI2PCI_PREFETCHABLE_MEMORY_LIMIT_UPPER32_REG 0x2C #define ARCMSR_PCI2PCI_CAPABILITIES_POINTER_REG 0x34 #define ARCMSR_PCI2PCI_PRIMARY_INTERRUPT_LINE_REG 0x3C #define ARCMSR_PCI2PCI_PRIMARY_INTERRUPT_PIN_REG 0x3D #define ARCMSR_PCI2PCI_BRIDGE_CONTROL_REG 0x3E #define ARCMSR_ATU_VENDOR_ID_REG 0x00 #define ARCMSR_ATU_DEVICE_ID_REG 0x02 #define ARCMSR_ATU_COMMAND_REG 0x04 #define ARCMSR_ATU_STATUS_REG 0x06 #define ARCMSR_ATU_REVISION_REG 0x08 #define ARCMSR_ATU_CLASS_CODE_REG 0x09 #define ARCMSR_ATU_CACHELINE_SIZE_REG 0x0C #define ARCMSR_ATU_LATENCY_TIMER_REG 0x0D #define ARCMSR_ATU_HEADER_TYPE_REG 0x0E #define ARCMSR_ATU_BIST_REG 0x0F #define ARCMSR_INBOUND_ATU_BASE_ADDRESS0_REG 0x10 #define ARCMSR_INBOUND_ATU_MEMORY_PREFETCHABLE 0x08 #define ARCMSR_INBOUND_ATU_MEMORY_WINDOW64 0x04 #define ARCMSR_INBOUND_ATU_UPPER_BASE_ADDRESS0_REG 0x14 #define ARCMSR_INBOUND_ATU_BASE_ADDRESS1_REG 0x18 #define ARCMSR_INBOUND_ATU_UPPER_BASE_ADDRESS1_REG 0x1C #define ARCMSR_INBOUND_ATU_BASE_ADDRESS2_REG 0x20 #define ARCMSR_INBOUND_ATU_UPPER_BASE_ADDRESS2_REG 0x24 #define ARCMSR_ATU_SUBSYSTEM_VENDOR_ID_REG 0x2C #define ARCMSR_ATU_SUBSYSTEM_ID_REG 0x2E #define ARCMSR_EXPANSION_ROM_BASE_ADDRESS_REG 0x30 #define ARCMSR_EXPANSION_ROM_ADDRESS_DECODE_ENABLE 0x01 #define ARCMSR_ATU_CAPABILITY_PTR_REG 0x34 #define ARCMSR_ATU_INTERRUPT_LINE_REG 0x3C #define ARCMSR_ATU_INTERRUPT_PIN_REG 0x3D #define ARCMSR_ATU_MINIMUM_GRANT_REG 0x3E #define ARCMSR_ATU_MAXIMUM_LATENCY_REG 0x3F #define ARCMSR_INBOUND_ATU_LIMIT0_REG 0x40 #define ARCMSR_INBOUND_ATU_TRANSLATE_VALUE0_REG 0x44 #define ARCMSR_EXPANSION_ROM_LIMIT_REG 0x48 #define ARCMSR_EXPANSION_ROM_TRANSLATE_VALUE_REG 0x4C #define ARCMSR_INBOUND_ATU_LIMIT1_REG 0x50 #define ARCMSR_INBOUND_ATU_LIMIT2_REG 0x54 #define ARCMSR_INBOUND_ATU_TRANSLATE_VALUE2_REG 0x58 #define ARCMSR_OUTBOUND_IO_WINDOW_TRANSLATE_VALUE_REG 0x5C #define ARCMSR_OUTBOUND_MEMORY_WINDOW_TRANSLATE_VALUE0_REG 0x60 #define ARCMSR_OUTBOUND_UPPER32_MEMORY_WINDOW_TRANSLATE_VALUE0_REG 0x64 #define ARCMSR_OUTBOUND_MEMORY_WINDOW_TRANSLATE_VALUE1_REG 0x68 #define ARCMSR_OUTBOUND_UPPER32_MEMORY_WINDOW_TRANSLATE_VALUE1_REG 0x6C #define ARCMSR_OUTBOUND_UPPER32_DIRECT_WINDOW_TRANSLATE_VALUE_REG 0x78 #define ARCMSR_ATU_CONFIGURATION_REG 0x80 #define ARCMSR_PCI_CONFIGURATION_STATUS_REG 0x84 #define ARCMSR_ATU_INTERRUPT_STATUS_REG 0x88 #define ARCMSR_ATU_INTERRUPT_MASK_REG 0x8C #define ARCMSR_INBOUND_ATU_BASE_ADDRESS3_REG 0x90 #define ARCMSR_INBOUND_ATU_UPPER_BASE_ADDRESS3_REG 0x94 #define ARCMSR_INBOUND_ATU_LIMIT3_REG 0x98 #define ARCMSR_INBOUND_ATU_TRANSLATE_VALUE3_REG 0x9C #define ARCMSR_OUTBOUND_CONFIGURATION_CYCLE_ADDRESS_REG 0xA4 #define ARCMSR_OUTBOUND_CONFIGURATION_CYCLE_DATA_REG 0xAC #define ARCMSR_VPD_CAPABILITY_IDENTIFIER_REG 0xB8 #define ARCMSR_VPD_NEXT_ITEM_PTR_REG 0xB9 #define ARCMSR_VPD_ADDRESS_REG 0xBA #define ARCMSR_VPD_DATA_REG 0xBC #define ARCMSR_POWER_MANAGEMENT_CAPABILITY_IDENTIFIER_REG 0xC0 #define ARCMSR_POWER_NEXT_ITEM_PTR_REG 0xC1 #define ARCMSR_POWER_MANAGEMENT_CAPABILITY_REG 0xC2 #define ARCMSR_POWER_MANAGEMENT_CONTROL_STATUS_REG 0xC4 #define ARCMSR_PCIX_CAPABILITY_IDENTIFIER_REG 0xE0 #define ARCMSR_PCIX_NEXT_ITEM_PTR_REG 0xE1 #define ARCMSR_PCIX_COMMAND_REG 0xE2 #define ARCMSR_PCIX_STATUS_REG 0xE4 #define ARCMSR_MU_INBOUND_MESSAGE_REG0 0x10 #define ARCMSR_MU_INBOUND_MESSAGE_REG1 0x14 #define ARCMSR_MU_OUTBOUND_MESSAGE_REG0 0x18 #define ARCMSR_MU_OUTBOUND_MESSAGE_REG1 0x1C #define ARCMSR_MU_INBOUND_DOORBELL_REG 0x20 #define ARCMSR_MU_INBOUND_INTERRUPT_STATUS_REG 0x24 #define ARCMSR_MU_INBOUND_INTERRUPT_MASK_REG 0x28 #define ARCMSR_MU_OUTBOUND_DOORBELL_REG 0x2C #define ARCMSR_MU_OUTBOUND_INTERRUPT_STATUS_REG 0x30 #define ARCMSR_MU_OUTBOUND_INTERRUPT_MASK_REG 0x34 #define ARCMSR_MU_INBOUND_QUEUE_PORT_REG 0x40 #define ARCMSR_MU_OUTBOUND_QUEUE_PORT_REG 0x44 #define ARCMSR_MU_INBOUND_MESSAGE0_INT 0x01 #define ARCMSR_MU_INBOUND_MESSAGE1_INT 0x02 #define ARCMSR_MU_INBOUND_DOORBELL_INT 0x04 #define ARCMSR_MU_INBOUND_ERROR_DOORBELL_INT 0x08 #define ARCMSR_MU_INBOUND_POSTQUEUE_INT 0x10 #define ARCMSR_MU_INBOUND_QUEUEFULL_INT 0x20 #define ARCMSR_MU_INBOUND_INDEX_INT 0x40 #define ARCMSR_MU_INBOUND_MESSAGE0_INTMASKENABLE 0x01 #define ARCMSR_MU_INBOUND_MESSAGE1_INTMASKENABLE 0x02 #define ARCMSR_MU_INBOUND_DOORBELL_INTMASKENABLE 0x04 #define ARCMSR_MU_INBOUND_DOORBELL_ERROR_INTMASKENABLE 0x08 #define ARCMSR_MU_INBOUND_POSTQUEUE_INTMASKENABLE 0x10 #define ARCMSR_MU_INBOUND_QUEUEFULL_INTMASKENABLE 0x20 #define ARCMSR_MU_INBOUND_INDEX_INTMASKENABLE 0x40 #define ARCMSR_MU_OUTBOUND_MESSAGE0_INT 0x01 #define ARCMSR_MU_OUTBOUND_MESSAGE1_INT 0x02 #define ARCMSR_MU_OUTBOUND_DOORBELL_INT 0x04 #define ARCMSR_MU_OUTBOUND_POSTQUEUE_INT 0x08 #define ARCMSR_MU_OUTBOUND_PCI_INT 0x10 #define ARCMSR_MU_OUTBOUND_HANDLE_INT \ (ARCMSR_MU_OUTBOUND_MESSAGE0_INT| \ ARCMSR_MU_OUTBOUND_MESSAGE1_INT| \ ARCMSR_MU_OUTBOUND_DOORBELL_INT| \ ARCMSR_MU_OUTBOUND_POSTQUEUE_INT| \ ARCMSR_MU_OUTBOUND_PCI_INT) #define ARCMSR_MU_OUTBOUND_MESSAGE0_INTMASKENABLE 0x01 #define ARCMSR_MU_OUTBOUND_MESSAGE1_INTMASKENABLE 0x02 #define ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE 0x04 #define ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE 0x08 #define ARCMSR_MU_OUTBOUND_PCI_INTMASKENABLE 0x10 #define ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE 0x1F #define ARCMSR_MU_CONFIGURATION_REG 0xFFFFE350 #define ARCMSR_MU_QUEUE_BASE_ADDRESS_REG 0xFFFFE354 #define ARCMSR_MU_INBOUND_FREE_HEAD_PTR_REG 0xFFFFE360 #define ARCMSR_MU_INBOUND_FREE_TAIL_PTR_REG 0xFFFFE364 #define ARCMSR_MU_INBOUND_POST_HEAD_PTR_REG 0xFFFFE368 #define ARCMSR_MU_INBOUND_POST_TAIL_PTR_REG 0xFFFFE36C #define ARCMSR_MU_LOCAL_MEMORY_INDEX_REG 0xFFFFE380 #define ARCMSR_MU_CIRCULAR_QUEUE_ENABLE 0x0001 #define ARCMSR_MU_CIRCULAR_QUEUE_SIZE4K 0x0002 #define ARCMSR_MU_CIRCULAR_QUEUE_SIZE8K 0x0004 #define ARCMSR_MU_CIRCULAR_QUEUE_SIZE16K 0x0008 #define ARCMSR_MU_CIRCULAR_QUEUE_SIZE32K 0x0010 #define ARCMSR_MU_CIRCULAR_QUEUE_SIZE64K 0x0020 #ifdef __cplusplus } #endif /* arcmsr.h */ #endif /* _SYS_SCSI_ADAPTERS_ARCMSR_H */