/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #include #include "../../../../common/pci/pci_strings.h" #include #include #include #include #define pci_getb (*pci_getb_func) #define pci_getw (*pci_getw_func) #define pci_getl (*pci_getl_func) #define pci_putb (*pci_putb_func) #define pci_putw (*pci_putw_func) #define pci_putl (*pci_putl_func) #define dcmn_err if (pci_boot_debug) cmn_err #define CONFIG_INFO 0 #define CONFIG_UPDATE 1 #define CONFIG_NEW 2 #define CONFIG_FIX 3 #define COMPAT_BUFSIZE 512 /* See AMD-8111 Datasheet Rev 3.03, Page 149: */ #define LPC_IO_CONTROL_REG_1 0x40 #define AMD8111_ENABLENMI (uint8_t)0x80 #define DEVID_AMD8111_LPC 0x7468 struct pci_fixundo { uint8_t bus; uint8_t dev; uint8_t fn; void (*undofn)(uint8_t, uint8_t, uint8_t); struct pci_fixundo *next; }; extern int pci_bios_nbus; static uchar_t max_dev_pci = 32; /* PCI standard */ int pci_boot_debug = 0; extern struct memlist *find_bus_res(int, int); static struct pci_fixundo *undolist = NULL; /* * Module prototypes */ static void enumerate_bus_devs(uchar_t bus, int config_op); static void create_root_bus_dip(uchar_t bus); static dev_info_t *process_devfunc(uchar_t, uchar_t, uchar_t, uchar_t, ushort_t, int); static void add_compatible(dev_info_t *, ushort_t, ushort_t, ushort_t, ushort_t, uchar_t, uint_t, int); static int add_reg_props(dev_info_t *, uchar_t, uchar_t, uchar_t, int, int); static void add_ppb_props(dev_info_t *, uchar_t, uchar_t, uchar_t, int); static void add_model_prop(dev_info_t *, uint_t); static void add_bus_range_prop(int); static void add_bus_slot_names_prop(int); static void add_ppb_ranges_prop(int); static void add_bus_available_prop(int); static void fix_ppb_res(uchar_t); static void alloc_res_array(); static void create_ioapic_node(int bus, int dev, int fn, ushort_t vendorid, ushort_t deviceid); extern int pci_slot_names_prop(int, char *, int); /* set non-zero to force PCI peer-bus renumbering */ int pci_bus_always_renumber = 0; /* get the subordinate bus # for a root/peer bus */ static int pci_root_subbus(int bus, uchar_t *subbus) { ACPI_HANDLE hdl; ACPI_BUFFER rb; ACPI_RESOURCE *rp; int rv; if (pci_bus_res[bus].dip == NULL) { /* non-used bus # */ return (AE_ERROR); } if (acpica_find_pciobj(pci_bus_res[bus].dip, &hdl) != AE_OK) { cmn_err(CE_WARN, "!No ACPI obj for bus%d, ACPI OFF?\n", bus); return (AE_ERROR); } rb.Length = ACPI_ALLOCATE_BUFFER; if (AcpiGetCurrentResources(hdl, &rb) != AE_OK) { cmn_err(CE_WARN, "!_CRS failed on pci%d\n", bus); return (AE_ERROR); } rv = AE_ERROR; for (rp = rb.Pointer; rp->Type != ACPI_RESOURCE_TYPE_END_TAG; rp = ACPI_NEXT_RESOURCE(rp)) { switch (rp->Type) { case ACPI_RESOURCE_TYPE_ADDRESS16: if (rp->Data.Address.ResourceType != ACPI_BUS_NUMBER_RANGE) continue; *subbus = (uchar_t)rp->Data.Address16.Maximum; dcmn_err(CE_NOTE, "Address16,subbus=%d\n", *subbus); break; case ACPI_RESOURCE_TYPE_ADDRESS32: if (rp->Data.Address.ResourceType != ACPI_BUS_NUMBER_RANGE) continue; *subbus = (uchar_t)rp->Data.Address32.Maximum; dcmn_err(CE_NOTE, "Address32,subbus=%d\n", *subbus); break; case ACPI_RESOURCE_TYPE_ADDRESS64: if (rp->Data.Address.ResourceType != ACPI_BUS_NUMBER_RANGE) continue; *subbus = (uchar_t)rp->Data.Address64.Maximum; dcmn_err(CE_NOTE, "Address64,subbus=%d\n", *subbus); break; case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64: if (rp->Data.Address.ResourceType != ACPI_BUS_NUMBER_RANGE) continue; *subbus = (uchar_t)rp->Data.ExtAddress64.Maximum; dcmn_err(CE_NOTE, "ExtAdr64,subbus=%d\n", *subbus); break; default: dcmn_err(CE_NOTE, "rp->Type=%d\n", rp->Type); continue; } /* found the bus-range resource */ dcmn_err(CE_NOTE, "pci%d, subbus=%d\n", bus, *subbus); rv = AE_OK; /* This breaks out of the resource scanning loop */ break; } AcpiOsFree(rb.Pointer); if (rv != AE_OK) cmn_err(CE_NOTE, "!No bus-range resource for pci%d\n", bus); return (rv); } /* * Enumerate all PCI devices */ void pci_setup_tree() { uchar_t i, root_bus_addr = 0; alloc_res_array(); for (i = 0; i <= pci_bios_nbus; i++) { pci_bus_res[i].par_bus = (uchar_t)-1; pci_bus_res[i].root_addr = (uchar_t)-1; pci_bus_res[i].sub_bus = i; } pci_bus_res[0].root_addr = root_bus_addr++; create_root_bus_dip(0); enumerate_bus_devs(0, CONFIG_INFO); /* * Now enumerate peer busses * * We loop till pci_bios_nbus. On most systems, there is * one more bus at the high end, which implements the ISA * compatibility bus. We don't care about that. * * Note: In the old (bootconf) enumeration, the peer bus * address did not use the bus number, and there were * too many peer busses created. The root_bus_addr is * used to maintain the old peer bus address assignment. * However, we stop enumerating phantom peers with no * device below. */ for (i = 1; i <= pci_bios_nbus; i++) { if (pci_bus_res[i].dip == NULL) { pci_bus_res[i].root_addr = root_bus_addr++; } enumerate_bus_devs(i, CONFIG_INFO); /* add slot-names property for named pci hot-plug slots */ add_bus_slot_names_prop(i); } } /* * >0 = present, 0 = not present, <0 = error */ static int pci_bbn_present(int bus) { ACPI_HANDLE hdl; ACPI_BUFFER rb; int rv; /* no dip means no _BBN */ if (pci_bus_res[bus].dip == NULL) return (0); rv = acpica_find_pciobj(pci_bus_res[bus].dip, &hdl); if (rv != AE_OK) return (-1); rb.Length = ACPI_ALLOCATE_BUFFER; rv = AcpiEvaluateObject(hdl, "_BBN", NULL, &rb); if (rb.Length > 0) AcpiOsFree(rb.Pointer); if (rv == AE_OK) return (1); else if (rv == AE_NOT_FOUND) return (0); else return (-1); } /* * Return non-zero if any PCI bus in the system has an associated * _BBN object, 0 otherwise. */ static int pci_roots_have_bbn(void) { int i; /* * Scan the PCI busses and look for at least 1 _BBN */ for (i = 0; i <= pci_bios_nbus; i++) { /* skip non-root (peer) PCI busses */ if (pci_bus_res[i].par_bus != (uchar_t)-1) continue; if (pci_bbn_present(i) > 0) return (1); } return (0); } /* * return non-zero if the machine is one on which we renumber * the internal pci unit-addresses */ static int pci_bus_renumber() { ACPI_TABLE_HEADER *fadt; if (pci_bus_always_renumber) return (1); /* get the FADT */ if (AcpiGetFirmwareTable(FADT_SIG, 1, ACPI_LOGICAL_ADDRESSING, (ACPI_TABLE_HEADER **)&fadt) != AE_OK) return (0); /* compare OEM Table ID to "SUNm31" */ if (strncmp("SUNm31", fadt->OemId, 6)) return (0); else return (1); } /* * Initial enumeration of the physical PCI bus hierarchy can * leave 'gaps' in the order of peer PCI bus unit-addresses. * Systems with more than one peer PCI bus *must* have an ACPI * _BBN object associated with each peer bus; use the presence * of this object to remove gaps in the numbering of the peer * PCI bus unit-addresses - only peer busses with an associated * _BBN are counted. */ static void pci_renumber_root_busses(void) { int pci_regs[] = {0, 0, 0}; int i, root_addr = 0; /* * Currently, we only enable the re-numbering on specific * Sun machines; this is a work-around for the more complicated * issue of upgrade changing physical device paths */ if (!pci_bus_renumber()) return; /* * If we find no _BBN objects at all, we either don't need * to do anything or can't do anything anyway */ if (!pci_roots_have_bbn()) return; for (i = 0; i <= pci_bios_nbus; i++) { /* skip non-root (peer) PCI busses */ if (pci_bus_res[i].par_bus != (uchar_t)-1) continue; if (pci_bbn_present(i) < 1) { pci_bus_res[i].root_addr = (uchar_t)-1; continue; } ASSERT(pci_bus_res[i].dip != NULL); if (pci_bus_res[i].root_addr != root_addr) { /* update reg property for node */ pci_bus_res[i].root_addr = root_addr; pci_regs[0] = pci_bus_res[i].root_addr; (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, pci_bus_res[i].dip, "reg", (int *)pci_regs, 3); } root_addr++; } } static void remove_resource_range(struct memlist **list, int *ranges, int range_count) { struct range { uint32_t base; uint32_t len; }; int index; for (index = 0; index < range_count; index++) { /* all done if list is or has become empty */ if (*list == NULL) break; (void) memlist_remove(list, (uint64_t)((struct range *)ranges)[index].base, (uint64_t)((struct range *)ranges)[index].len); } } static void remove_used_resources() { dev_info_t *used; int *narray; uint_t ncount; int status; int bus; used = ddi_find_devinfo("used-resources", -1, 0); if (used == NULL) return; status = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, used, DDI_PROP_DONTPASS, "io-space", &narray, &ncount); if (status == DDI_PROP_SUCCESS) { for (bus = 0; bus <= pci_bios_nbus; bus++) remove_resource_range(&pci_bus_res[bus].io_ports, narray, ncount / 2); ddi_prop_free(narray); } status = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, used, DDI_PROP_DONTPASS, "device-memory", &narray, &ncount); if (status == DDI_PROP_SUCCESS) { for (bus = 0; bus <= pci_bios_nbus; bus++) remove_resource_range(&pci_bus_res[bus].mem_space, narray, ncount / 2); ddi_prop_free(narray); } } /* * Assign i/o resources to unconfigured hotplug bridges after the first pass. * It must be after the first pass in order to use the ports left over after * accounting for i/o resources of bridges that have been configured by bios. * We are expecting unconfigured bridges to be empty bridges otherwise * this resource assignment needs to be done at an earlier stage. */ static void fix_ppb_res(uchar_t secbus) { uchar_t bus, dev, func; uint_t io_base, io_limit, io_size = 0x1000; uint64_t addr = 0; int *regp = NULL, rv; uint_t reglen; dev_info_t *dip; dip = pci_bus_res[secbus].dip; /* some entries may be empty due to discontiguous bus numbering */ if (dip == NULL) return; if (ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "pci-hotplug-type", INBAND_HPC_NONE) == INBAND_HPC_NONE) return; rv = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "reg", ®p, ®len); if (rv != DDI_PROP_SUCCESS || reglen == 0) { /* panic to enforce proper calling order */ cmn_err(CE_PANIC, "reg property unset for bus %d\n", secbus); return; } func = (uchar_t)((regp[0] >> 8) & 0x7); dev = (uchar_t)((regp[0] >> 11) & 0x1f); bus = (uchar_t)((regp[0] >> 16) & 0xff); ASSERT(bus == pci_bus_res[secbus].par_bus); /* * io_base >= io_limit means that the bridge was not configured * This may have been set by the bios or by add_ppb_props() */ io_base = pci_getb(bus, dev, func, PCI_BCNF_IO_BASE_LOW); io_limit = pci_getb(bus, dev, func, PCI_BCNF_IO_LIMIT_LOW); ASSERT(io_base != 0xff && io_limit != 0xff); io_base = (io_base & 0xf0) << 8; io_limit = ((io_limit & 0xf0) << 8) | 0xfff; if (io_base < io_limit && io_base != 0) return; if (ddi_get_child(dip) != NULL) { cmn_err(CE_WARN, "detected unsupported configuration: " "non-empty bridge (bus 0x%x, dev 0x%x, func 0x%x) without " "I/O resources assigned by bios for secondary bus 0x%x\n", bus, dev, func, secbus); goto IOFAIL; } if (pci_bus_res[bus].io_ports != NULL) addr = memlist_find(&pci_bus_res[bus].io_ports, io_size, 0x1000); ASSERT(addr <= 0xf000); if (addr == 0) { cmn_err(CE_WARN, "out of I/O resources on bridge: bus 0x%x, " "dev 0x%x, func 0x%x, for secondary bus 0x%x\n", bus, dev, func, secbus); goto IOFAIL; } memlist_insert(&pci_bus_res[secbus].io_ports, addr, io_size); io_base = addr; io_limit = addr + io_size - 1; pci_putb(bus, dev, func, PCI_BCNF_IO_BASE_LOW, (uint8_t)((io_base >> 8) & 0xf0)); pci_putb(bus, dev, func, PCI_BCNF_IO_LIMIT_LOW, (uint8_t)((io_limit >> 8) & 0xf0)); add_ppb_ranges_prop(secbus); return; /*NOTREACHED*/ IOFAIL: cmn_err(CE_WARN, "devices under bridge bus 0x%x, dev 0x%x, func 0x%x " "will not be assigned I/O ports\n", bus, dev, func); } void pci_reprogram(void) { int i, pci_reconfig = 1; char *onoff; /* * Excise phantom roots if possible */ pci_renumber_root_busses(); /* add bus-range property for root/peer bus nodes */ for (i = 0; i <= pci_bios_nbus; i++) { if (pci_bus_res[i].par_bus == (uchar_t)-1) { uchar_t subbus; if (pci_root_subbus(i, &subbus) == AE_OK) pci_bus_res[i].sub_bus = subbus; add_bus_range_prop(i); } } if (ddi_prop_lookup_string(DDI_DEV_T_ANY, ddi_root_node(), DDI_PROP_DONTPASS, "pci-reprog", &onoff) == DDI_SUCCESS) { if (strcmp(onoff, "off") == 0) { pci_reconfig = 0; cmn_err(CE_NOTE, "pci device reprogramming disabled"); } ddi_prop_free(onoff); } /* remove used-resources from PCI resource maps */ remove_used_resources(); for (i = 0; i <= pci_bios_nbus; i++) { /* configure devices not configured by bios */ if (pci_reconfig) { fix_ppb_res(i); enumerate_bus_devs(i, CONFIG_NEW); } /* All dev programmed, so we can create available prop */ add_bus_available_prop(i); } } /* * Create top-level bus dips, i.e. /pci@0,0, /pci@1,0... */ static void create_root_bus_dip(uchar_t bus) { int pci_regs[] = {0, 0, 0}; dev_info_t *dip; ASSERT(pci_bus_res[bus].par_bus == (uchar_t)-1); ndi_devi_alloc_sleep(ddi_root_node(), "pci", (pnode_t)DEVI_SID_NODEID, &dip); (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, "#address-cells", 3); (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, "#size-cells", 2); pci_regs[0] = pci_bus_res[bus].root_addr; (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, "reg", (int *)pci_regs, 3); /* * If system has PCIe bus, then create different properties */ if (create_pcie_root_bus(bus, dip) == B_FALSE) (void) ndi_prop_update_string(DDI_DEV_T_NONE, dip, "device_type", "pci"); (void) ndi_devi_bind_driver(dip, 0); pci_bus_res[bus].dip = dip; pci_bus_res[bus].pmem_space = find_bus_res(bus, PREFETCH_TYPE); pci_bus_res[bus].mem_space = find_bus_res(bus, MEM_TYPE); pci_bus_res[bus].io_ports = find_bus_res(bus, IO_TYPE); if (bus != 0) return; /* * Special treatment of bus 0: * If no resource from MPSPEC/HRT, copy pcimem from boot * and make I/O space the entire range starting at 0x100. There * is no difference between prefetchable memory or not. */ if (pci_bus_res[0].mem_space == NULL) pci_bus_res[0].mem_space = memlist_dup(bootops->boot_mem->pcimem); /* Exclude 0x00 to 0xff of the I/O space, used by all PCs */ if (pci_bus_res[0].io_ports == NULL) memlist_insert(&pci_bus_res[0].io_ports, 0x100, 0xff00); } /* * For any fixed configuration (often compatability) pci devices * and those with their own expansion rom, create device nodes * to hold the already configured device details. */ void enumerate_bus_devs(uchar_t bus, int config_op) { uchar_t dev, func, nfunc, header; ushort_t venid; dev_info_t *dip; struct pci_devfunc { struct pci_devfunc *next; dev_info_t *dip; uchar_t bus; uchar_t dev; uchar_t func; } *devlist = NULL, *entry; if (config_op == CONFIG_NEW) { dcmn_err(CE_NOTE, "configuring pci bus 0x%x", bus); } else if (config_op == CONFIG_FIX) { dcmn_err(CE_NOTE, "fixing devices on pci bus 0x%x", bus); } else dcmn_err(CE_NOTE, "enumerating pci bus 0x%x", bus); for (dev = 0; dev < max_dev_pci; dev++) { nfunc = 1; for (func = 0; func < nfunc; func++) { dcmn_err(CE_NOTE, "probing dev 0x%x, func 0x%x", dev, func); venid = pci_getw(bus, dev, func, PCI_CONF_VENID); if ((venid == 0xffff) || (venid == 0)) { /* no function at this address */ continue; } header = pci_getb(bus, dev, func, PCI_CONF_HEADER); if (header == 0xff) { continue; /* illegal value */ } /* * according to some mail from Microsoft posted * to the pci-drivers alias, their only requirement * for a multifunction device is for the 1st * function to have to PCI_HEADER_MULTI bit set. */ if ((func == 0) && (header & PCI_HEADER_MULTI)) { nfunc = 8; } if (config_op == CONFIG_FIX) { /* * If we're processing PCI fixes, no dip * will be returned. */ (void) process_devfunc(bus, dev, func, header, venid, config_op); } else if (config_op == CONFIG_INFO) { /* * Create the node, unconditionally, on the * first pass only. It may still need * resource assignment, which will be * done on the second, CONFIG_NEW, pass. */ dip = process_devfunc(bus, dev, func, header, venid, config_op); /* * If dip isn't null, put on a list to * save for reprogramming when config_op * is CONFIG_NEW. */ if (dip) { entry = kmem_alloc(sizeof (*entry), KM_SLEEP); entry->dip = dip; entry->dev = dev; entry->func = func; entry->next = devlist; devlist = entry; } } } } if (config_op == CONFIG_NEW) { devlist = (struct pci_devfunc *)pci_bus_res[bus].privdata; while (devlist) { entry = devlist; devlist = entry->next; cmn_err(CE_NOTE, "!reprogram pci device [%d/%d/%d] (%s)", bus, entry->dev, entry->func, ddi_driver_name(entry->dip)); (void) add_reg_props(entry->dip, bus, entry->dev, entry->func, CONFIG_UPDATE, 0); kmem_free(entry, sizeof (*entry)); } pci_bus_res[bus].privdata = NULL; } else if (config_op != CONFIG_FIX) { pci_bus_res[bus].privdata = devlist; } } static int check_pciide_prop(uchar_t revid, ushort_t venid, ushort_t devid, ushort_t subvenid, ushort_t subdevid) { static int prop_exist = -1; static char *pciide_str; char compat[32]; if (prop_exist == -1) { prop_exist = (ddi_prop_lookup_string(DDI_DEV_T_ANY, ddi_root_node(), DDI_PROP_DONTPASS, "pci-ide", &pciide_str) == DDI_SUCCESS); } if (!prop_exist) return (0); /* compare property value against various forms of compatible */ if (subvenid) { (void) snprintf(compat, sizeof (compat), "pci%x,%x.%x.%x.%x", venid, devid, subvenid, subdevid, revid); if (strcmp(pciide_str, compat) == 0) return (1); (void) snprintf(compat, sizeof (compat), "pci%x,%x.%x.%x", venid, devid, subvenid, subdevid); if (strcmp(pciide_str, compat) == 0) return (1); (void) snprintf(compat, sizeof (compat), "pci%x,%x", subvenid, subdevid); if (strcmp(pciide_str, compat) == 0) return (1); } (void) snprintf(compat, sizeof (compat), "pci%x,%x.%x", venid, devid, revid); if (strcmp(pciide_str, compat) == 0) return (1); (void) snprintf(compat, sizeof (compat), "pci%x,%x", venid, devid); if (strcmp(pciide_str, compat) == 0) return (1); return (0); } static int is_pciide(uchar_t basecl, uchar_t subcl, uchar_t revid, ushort_t venid, ushort_t devid, ushort_t subvenid, ushort_t subdevid) { struct ide_table { /* table for PCI_MASS_OTHER */ ushort_t venid; ushort_t devid; } *entry; /* XXX SATA devices: need a way to add dynamically */ static struct ide_table ide_other[] = { {0x1095, 0x3112}, {0x1095, 0x3114}, {0x1095, 0x3512}, {0, 0} }; if (basecl != PCI_CLASS_MASS) return (0); if (subcl == PCI_MASS_IDE) { return (1); } if (subcl != PCI_MASS_OTHER && subcl != PCI_MASS_SATA) { return (0); } entry = &ide_other[0]; while (entry->venid) { if (entry->venid == venid && entry->devid == devid) return (1); entry++; } return (check_pciide_prop(revid, venid, devid, subvenid, subdevid)); } static int is_display(uint_t classcode) { static uint_t disp_classes[] = { 0x000100, 0x030000, 0x030001 }; int i, nclasses = sizeof (disp_classes) / sizeof (uint_t); for (i = 0; i < nclasses; i++) { if (classcode == disp_classes[i]) return (1); } return (0); } static void add_undofix_entry(uint8_t bus, uint8_t dev, uint8_t fn, void (*undofn)(uint8_t, uint8_t, uint8_t)) { struct pci_fixundo *newundo; newundo = kmem_alloc(sizeof (struct pci_fixundo), KM_SLEEP); /* * Adding an item to this list means that we must turn its NMIENABLE * bit back on at a later time. */ newundo->bus = bus; newundo->dev = dev; newundo->fn = fn; newundo->undofn = undofn; newundo->next = undolist; /* add to the undo list in LIFO order */ undolist = newundo; } void add_pci_fixes(void) { int i; for (i = 0; i <= pci_bios_nbus; i++) { /* * For each bus, apply needed fixes to the appropriate devices. * This must be done before the main enumeration loop because * some fixes must be applied to devices normally encountered * later in the pci scan (e.g. if a fix to device 7 must be * applied before scanning device 6, applying fixes in the * normal enumeration loop would obviously be too late). */ enumerate_bus_devs(i, CONFIG_FIX); } } void undo_pci_fixes(void) { struct pci_fixundo *nextundo; uint8_t bus, dev, fn; /* * All fixes in the undo list are performed unconditionally. Future * fixes may require selective undo. */ while (undolist != NULL) { bus = undolist->bus; dev = undolist->dev; fn = undolist->fn; (*(undolist->undofn))(bus, dev, fn); nextundo = undolist->next; kmem_free(undolist, sizeof (struct pci_fixundo)); undolist = nextundo; } } static void undo_amd8111_pci_fix(uint8_t bus, uint8_t dev, uint8_t fn) { uint8_t val8; val8 = pci_getb(bus, dev, fn, LPC_IO_CONTROL_REG_1); /* * The NMIONERR bit is turned back on to allow the SMM BIOS * to handle more critical PCI errors (e.g. PERR#). */ val8 |= AMD8111_ENABLENMI; pci_putb(bus, dev, fn, LPC_IO_CONTROL_REG_1, val8); } static void pci_fix_amd8111(uint8_t bus, uint8_t dev, uint8_t fn) { uint8_t val8; val8 = pci_getb(bus, dev, fn, LPC_IO_CONTROL_REG_1); if ((val8 & AMD8111_ENABLENMI) == 0) return; /* * We reset NMIONERR in the LPC because master-abort on the PCI * bridge side of the 8111 will cause NMI, which might cause SMI, * which sometimes prevents all devices from being enumerated. */ val8 &= ~AMD8111_ENABLENMI; pci_putb(bus, dev, fn, LPC_IO_CONTROL_REG_1, val8); add_undofix_entry(bus, dev, fn, undo_amd8111_pci_fix); } static dev_info_t * process_devfunc(uchar_t bus, uchar_t dev, uchar_t func, uchar_t header, ushort_t vendorid, int config_op) { char nodename[32], unitaddr[5]; dev_info_t *dip; uchar_t basecl, subcl, progcl, intr, revid; ushort_t subvenid, subdevid, status; ushort_t slot_num; uint_t classcode, revclass; int reprogram = 0, pciide; int power[2] = {1, 1}; int pciex = 0; ushort_t is_pci_bridge = 0; ushort_t deviceid = pci_getw(bus, dev, func, PCI_CONF_DEVID); switch (header & PCI_HEADER_TYPE_M) { case PCI_HEADER_ZERO: subvenid = pci_getw(bus, dev, func, PCI_CONF_SUBVENID); subdevid = pci_getw(bus, dev, func, PCI_CONF_SUBSYSID); break; case PCI_HEADER_CARDBUS: subvenid = pci_getw(bus, dev, func, PCI_CBUS_SUBVENID); subdevid = pci_getw(bus, dev, func, PCI_CBUS_SUBSYSID); break; default: subvenid = 0; subdevid = 0; break; } if (config_op == CONFIG_FIX) { if (vendorid == VENID_AMD && deviceid == DEVID_AMD8111_LPC) { pci_fix_amd8111(bus, dev, func); } return (NULL); } /* XXX should be use generic names? derive from class? */ revclass = pci_getl(bus, dev, func, PCI_CONF_REVID); classcode = revclass >> 8; revid = revclass & 0xff; /* figure out if this is pci-ide */ basecl = classcode >> 16; subcl = (classcode >> 8) & 0xff; progcl = classcode & 0xff; pciide = is_pciide(basecl, subcl, revid, vendorid, deviceid, subvenid, subdevid); if (pciide) (void) snprintf(nodename, sizeof (nodename), "pci-ide"); else if (is_display(classcode)) (void) snprintf(nodename, sizeof (nodename), "display"); else if (subvenid != 0) (void) snprintf(nodename, sizeof (nodename), "pci%x,%x", subvenid, subdevid); else (void) snprintf(nodename, sizeof (nodename), "pci%x,%x", vendorid, deviceid); /* make sure parent bus dip has been created */ if (pci_bus_res[bus].dip == NULL) { create_root_bus_dip(bus); } ndi_devi_alloc_sleep(pci_bus_res[bus].dip, nodename, DEVI_SID_NODEID, &dip); if (check_if_device_is_pciex(dip, bus, dev, func, &slot_num, &is_pci_bridge) == B_TRUE) pciex = 1; /* add properties */ (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, "device-id", deviceid); (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, "vendor-id", vendorid); (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, "revision-id", revid); (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, "class-code", classcode); if (func == 0) (void) snprintf(unitaddr, sizeof (unitaddr), "%x", dev); else (void) snprintf(unitaddr, sizeof (unitaddr), "%x,%x", dev, func); (void) ndi_prop_update_string(DDI_DEV_T_NONE, dip, "unit-address", unitaddr); /* add device_type for display nodes */ if (is_display(classcode)) { (void) ndi_prop_update_string(DDI_DEV_T_NONE, dip, "device_type", "display"); } /* add special stuff for header type */ if ((header & PCI_HEADER_TYPE_M) == PCI_HEADER_ZERO) { uchar_t mingrant = pci_getb(bus, dev, func, PCI_CONF_MIN_G); uchar_t maxlatency = pci_getb(bus, dev, func, PCI_CONF_MAX_L); if (subvenid != 0) { (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, "subsystem-id", subdevid); (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, "subsystem-vendor-id", subvenid); } if (!pciex) (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, "min-grant", mingrant); if (!pciex) (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, "max-latency", maxlatency); } /* interrupt, record if not 0 */ intr = pci_getb(bus, dev, func, PCI_CONF_IPIN); if (intr != 0) (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, "interrupts", intr); /* * Add support for 133 mhz pci eventually */ status = pci_getw(bus, dev, func, PCI_CONF_STAT); (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, "devsel-speed", (status & PCI_STAT_DEVSELT) >> 9); if (!pciex && (status & PCI_STAT_FBBC)) (void) ndi_prop_create_boolean(DDI_DEV_T_NONE, dip, "fast-back-to-back"); if (!pciex && (status & PCI_STAT_66MHZ)) (void) ndi_prop_create_boolean(DDI_DEV_T_NONE, dip, "66mhz-capable"); if (status & PCI_STAT_UDF) (void) ndi_prop_create_boolean(DDI_DEV_T_NONE, dip, "udf-supported"); if (pciex && slot_num) (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, "physical-slot#", slot_num); (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, "power-consumption", power, 2); if ((basecl == PCI_CLASS_BRIDGE) && (subcl == PCI_BRIDGE_PCI)) add_ppb_props(dip, bus, dev, func, pciex); if (config_op == CONFIG_INFO && IS_CLASS_IOAPIC(basecl, subcl, progcl)) { create_ioapic_node(bus, dev, func, vendorid, deviceid); } /* check for ck8-04 based PCI ISA bridge only */ if (NVIDIA_IS_LPC_BRIDGE(vendorid, deviceid) && (dev == 1) && (func == 0)) add_nvidia_isa_bridge_props(dip, bus, dev, func); if (pciex && is_pci_bridge) (void) ndi_prop_update_string(DDI_DEV_T_NONE, dip, "model", (char *)"PCIe-PCI bridge"); else add_model_prop(dip, classcode); add_compatible(dip, subvenid, subdevid, vendorid, deviceid, revid, classcode, pciex); reprogram = add_reg_props(dip, bus, dev, func, config_op, pciide); (void) ndi_devi_bind_driver(dip, 0); /* special handling for pci-ide */ if (pciide) { dev_info_t *cdip; /* * Create properties specified by P1275 Working Group * Proposal #414 Version 1 */ (void) ndi_prop_update_string(DDI_DEV_T_NONE, dip, "device_type", "pci-ide"); (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, "#address-cells", 1); (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, "#size-cells", 0); /* allocate two child nodes */ ndi_devi_alloc_sleep(dip, "ide", (pnode_t)DEVI_SID_NODEID, &cdip); (void) ndi_prop_update_int(DDI_DEV_T_NONE, cdip, "reg", 0); (void) ndi_devi_bind_driver(cdip, 0); ndi_devi_alloc_sleep(dip, "ide", (pnode_t)DEVI_SID_NODEID, &cdip); (void) ndi_prop_update_int(DDI_DEV_T_NONE, cdip, "reg", 1); (void) ndi_devi_bind_driver(cdip, 0); reprogram = 0; /* don't reprogram pci-ide bridge */ } if (reprogram) return (dip); return (NULL); } /* * Set the compatible property to a value compliant with * rev 2.1 of the IEEE1275 PCI binding. * (Also used for PCI-Express devices). * * pciVVVV,DDDD.SSSS.ssss.RR (0) * pciVVVV,DDDD.SSSS.ssss (1) * pciSSSS,ssss (2) * pciVVVV,DDDD.RR (3) * pciVVVV,DDDD (4) * pciclass,CCSSPP (5) * pciclass,CCSS (6) * * The Subsystem (SSSS) forms are not inserted if * subsystem-vendor-id is 0. * * NOTE: For PCI-Express devices "pci" is replaced with "pciex" in 0-6 above * property 2 is not created as per "1275 bindings for PCI Express Interconnect" * * Set with setprop and \x00 between each * to generate the encoded string array form. */ void add_compatible(dev_info_t *dip, ushort_t subvenid, ushort_t subdevid, ushort_t vendorid, ushort_t deviceid, uchar_t revid, uint_t classcode, int pciex) { int i = 0; int size = COMPAT_BUFSIZE; char *compat[13]; char *buf, *curr; curr = buf = kmem_alloc(size, KM_SLEEP); if (pciex) { if (subvenid) { compat[i++] = curr; /* form 0 */ (void) snprintf(curr, size, "pciex%x,%x.%x.%x.%x", vendorid, deviceid, subvenid, subdevid, revid); size -= strlen(curr) + 1; curr += strlen(curr) + 1; compat[i++] = curr; /* form 1 */ (void) snprintf(curr, size, "pciex%x,%x.%x.%x", vendorid, deviceid, subvenid, subdevid); size -= strlen(curr) + 1; curr += strlen(curr) + 1; } compat[i++] = curr; /* form 3 */ (void) snprintf(curr, size, "pciex%x,%x.%x", vendorid, deviceid, revid); size -= strlen(curr) + 1; curr += strlen(curr) + 1; compat[i++] = curr; /* form 4 */ (void) snprintf(curr, size, "pciex%x,%x", vendorid, deviceid); size -= strlen(curr) + 1; curr += strlen(curr) + 1; compat[i++] = curr; /* form 5 */ (void) snprintf(curr, size, "pciexclass,%06x", classcode); size -= strlen(curr) + 1; curr += strlen(curr) + 1; compat[i++] = curr; /* form 6 */ (void) snprintf(curr, size, "pciexclass,%04x", (classcode >> 8)); size -= strlen(curr) + 1; curr += strlen(curr) + 1; } if (subvenid) { compat[i++] = curr; /* form 0 */ (void) snprintf(curr, size, "pci%x,%x.%x.%x.%x", vendorid, deviceid, subvenid, subdevid, revid); size -= strlen(curr) + 1; curr += strlen(curr) + 1; compat[i++] = curr; /* form 1 */ (void) snprintf(curr, size, "pci%x,%x.%x.%x", vendorid, deviceid, subvenid, subdevid); size -= strlen(curr) + 1; curr += strlen(curr) + 1; compat[i++] = curr; /* form 2 */ (void) snprintf(curr, size, "pci%x,%x", subvenid, subdevid); size -= strlen(curr) + 1; curr += strlen(curr) + 1; } compat[i++] = curr; /* form 3 */ (void) snprintf(curr, size, "pci%x,%x.%x", vendorid, deviceid, revid); size -= strlen(curr) + 1; curr += strlen(curr) + 1; compat[i++] = curr; /* form 4 */ (void) snprintf(curr, size, "pci%x,%x", vendorid, deviceid); size -= strlen(curr) + 1; curr += strlen(curr) + 1; compat[i++] = curr; /* form 5 */ (void) snprintf(curr, size, "pciclass,%06x", classcode); size -= strlen(curr) + 1; curr += strlen(curr) + 1; compat[i++] = curr; /* form 6 */ (void) snprintf(curr, size, "pciclass,%04x", (classcode >> 8)); size -= strlen(curr) + 1; curr += strlen(curr) + 1; (void) ndi_prop_update_string_array(DDI_DEV_T_NONE, dip, "compatible", compat, i); kmem_free(buf, COMPAT_BUFSIZE); } /* * Adjust the reg properties for a dual channel PCI-IDE device. * * NOTE: don't do anything that changes the order of the hard-decodes * and programmed BARs. The kernel driver depends on these values * being in this order regardless of whether they're for a 'native' * mode BAR or not. */ /* * config info for pci-ide devices */ static struct { uchar_t native_mask; /* 0 == 'compatibility' mode, 1 == native */ uchar_t bar_offset; /* offset for alt status register */ ushort_t addr; /* compatibility mode base address */ ushort_t length; /* number of ports for this BAR */ } pciide_bar[] = { { 0x01, 0, 0x1f0, 8 }, /* primary lower BAR */ { 0x01, 2, 0x3f6, 1 }, /* primary upper BAR */ { 0x04, 0, 0x170, 8 }, /* secondary lower BAR */ { 0x04, 2, 0x376, 1 } /* secondary upper BAR */ }; static int pciIdeAdjustBAR(uchar_t progcl, int index, uint_t *basep, uint_t *lenp) { int hard_decode = 0; /* * Adjust the base and len for the BARs of the PCI-IDE * device's primary and secondary controllers. The first * two BARs are for the primary controller and the next * two BARs are for the secondary controller. The fifth * and sixth bars are never adjusted. */ if (index >= 0 && index <= 3) { *lenp = pciide_bar[index].length; if (progcl & pciide_bar[index].native_mask) { *basep += pciide_bar[index].bar_offset; } else { *basep = pciide_bar[index].addr; hard_decode = 1; } } /* * if either base or len is zero make certain both are zero */ if (*basep == 0 || *lenp == 0) { *basep = 0; *lenp = 0; hard_decode = 0; } return (hard_decode); } /* * Add the "reg" and "assigned-addresses" property */ static int add_reg_props(dev_info_t *dip, uchar_t bus, uchar_t dev, uchar_t func, int config_op, int pciide) { uchar_t baseclass, subclass, progclass, header; ushort_t bar_sz; uint_t value = 0, len, devloc; uint_t base, base_hi, type; ushort_t offset, end; int max_basereg, j, reprogram = 0; uint_t phys_hi; struct memlist **io_res, **mres, **mem_res, **pmem_res; uint16_t cmd_reg; pci_regspec_t regs[16] = {{0}}; pci_regspec_t assigned[15] = {{0}}; int nreg, nasgn, enable = 0; io_res = &pci_bus_res[bus].io_ports; mem_res = &pci_bus_res[bus].mem_space; if (bus == 0) /* for bus 0, there is only mem_space */ pmem_res = mem_res; else pmem_res = &pci_bus_res[bus].pmem_space; devloc = (uint_t)bus << 16 | (uint_t)dev << 11 | (uint_t)func << 8; regs[0].pci_phys_hi = devloc; nreg = 1; /* rest of regs[0] is all zero */ nasgn = 0; baseclass = pci_getb(bus, dev, func, PCI_CONF_BASCLASS); subclass = pci_getb(bus, dev, func, PCI_CONF_SUBCLASS); progclass = pci_getb(bus, dev, func, PCI_CONF_PROGCLASS); header = pci_getb(bus, dev, func, PCI_CONF_HEADER) & PCI_HEADER_TYPE_M; switch (header) { case PCI_HEADER_ZERO: max_basereg = PCI_BASE_NUM; break; case PCI_HEADER_PPB: max_basereg = PCI_BCNF_BASE_NUM; break; case PCI_HEADER_CARDBUS: max_basereg = PCI_CBUS_BASE_NUM; break; default: max_basereg = 0; break; } /* * Create the register property by saving the current * value of the base register. Write 0xffffffff to the * base register. Read the value back to determine the * required size of the address space. Restore the base * register contents. * * Do not disable I/O and memory access; this isn't necessary * since no driver is yet attached to this device, and disabling * I/O and memory access has the side-effect of disabling PCI-PCI * bridge mappings, which makes the bridge transparent to secondary- * bus activity (see sections 4.1-4.3 of the PCI-PCI Bridge * Spec V1.2). */ end = PCI_CONF_BASE0 + max_basereg * sizeof (uint_t); for (j = 0, offset = PCI_CONF_BASE0; offset < end; j++, offset += bar_sz) { int hard_decode = 0; /* determine the size of the address space */ base = pci_getl(bus, dev, func, offset); pci_putl(bus, dev, func, offset, 0xffffffff); value = pci_getl(bus, dev, func, offset); pci_putl(bus, dev, func, offset, base); /* construct phys hi,med.lo, size hi, lo */ if ((pciide && j < 4) || (base & PCI_BASE_SPACE_IO)) { /* i/o space */ bar_sz = PCI_BAR_SZ_32; value &= PCI_BASE_IO_ADDR_M; len = ((value ^ (value-1)) + 1) >> 1; /* XXX Adjust first 4 IDE registers */ if (pciide) { if (subclass != PCI_MASS_IDE) progclass = (PCI_IDE_IF_NATIVE_PRI | PCI_IDE_IF_NATIVE_SEC); hard_decode = pciIdeAdjustBAR(progclass, j, &base, &len); } else if (value == 0) { /* skip base regs with size of 0 */ continue; } regs[nreg].pci_size_low = assigned[nasgn].pci_size_low = len; if (!hard_decode) { regs[nreg].pci_phys_hi = (PCI_ADDR_IO | devloc) + offset; } else { regs[nreg].pci_phys_hi = (PCI_RELOCAT_B | PCI_ADDR_IO | devloc) + offset; regs[nreg].pci_phys_low = base & PCI_BASE_IO_ADDR_M; } assigned[nasgn].pci_phys_hi = (PCI_RELOCAT_B | PCI_ADDR_IO | devloc) + offset; type = base & (~PCI_BASE_IO_ADDR_M); base &= PCI_BASE_IO_ADDR_M; /* * first pass - gather what's there * update/second pass - adjust/allocate regions * config - allocate regions */ if (config_op == CONFIG_INFO) { /* first pass */ /* take out of the resource map of the bus */ if (*io_res && base != 0) (void) memlist_remove(io_res, (uint64_t)base, (uint64_t)len); else if (*io_res) reprogram = 1; } else if (*io_res && base == 0) { base = (uint_t)memlist_find(io_res, (uint64_t)len, (uint64_t)0x4); if (base != 0) { /* XXX need to worry about 64-bit? */ pci_putl(bus, dev, func, offset, base | type); base = pci_getl(bus, dev, func, offset); base &= PCI_BASE_IO_ADDR_M; } if (base == 0) { cmn_err(CE_WARN, "failed to program" " IO space [%d/%d/%d] BAR@0x%x" " length 0x%x", bus, dev, func, offset, len); } else enable |= PCI_COMM_IO; } assigned[nasgn].pci_phys_low = base; nreg++, nasgn++; } else { /* memory space */ if ((base & PCI_BASE_TYPE_M) == PCI_BASE_TYPE_ALL) { bar_sz = PCI_BAR_SZ_64; base_hi = pci_getl(bus, dev, func, offset + 4); phys_hi = PCI_ADDR_MEM64; } else { bar_sz = PCI_BAR_SZ_32; base_hi = 0; phys_hi = PCI_ADDR_MEM32; } /* skip base regs with size of 0 */ value &= PCI_BASE_M_ADDR_M; if (value == 0) { continue; } len = ((value ^ (value-1)) + 1) >> 1; regs[nreg].pci_size_low = assigned[nasgn].pci_size_low = len; phys_hi |= (devloc | offset); if (base & PCI_BASE_PREF_M) { mres = pmem_res; phys_hi |= PCI_PREFETCH_B; } else { mres = mem_res; } regs[nreg].pci_phys_hi = assigned[nasgn].pci_phys_hi = phys_hi; assigned[nasgn].pci_phys_hi |= PCI_RELOCAT_B; assigned[nasgn].pci_phys_mid = base_hi; type = base & ~PCI_BASE_M_ADDR_M; base &= PCI_BASE_M_ADDR_M; if (config_op == CONFIG_INFO) { /* take out of the resource map of the bus */ if (*mres && base != 0) { (void) memlist_remove(mres, (uint64_t)base, (uint64_t)len); } else if (*mres) reprogram = 1; } else if (*mres && base == 0) { base = (uint_t)memlist_find(mres, (uint64_t)len, (uint64_t)0x1000); if (base != NULL) { pci_putl(bus, dev, func, offset, base | type); base = pci_getl(bus, dev, func, offset); base &= PCI_BASE_M_ADDR_M; } if (base == 0) { cmn_err(CE_WARN, "failed to program " "mem space [%d/%d/%d] BAR@0x%x" " length 0x%x", bus, dev, func, offset, len); } else enable |= PCI_COMM_MAE; } assigned[nasgn].pci_phys_low = base; nreg++, nasgn++; } } switch (header) { case PCI_HEADER_ZERO: offset = PCI_CONF_ROM; break; case PCI_HEADER_PPB: offset = PCI_BCNF_ROM; break; default: /* including PCI_HEADER_CARDBUS */ goto done; } /* * Add the expansion rom memory space * Determine the size of the ROM base reg; don't write reserved bits * ROM isn't in the PCI memory space. */ base = pci_getl(bus, dev, func, offset); pci_putl(bus, dev, func, offset, PCI_BASE_ROM_ADDR_M); value = pci_getl(bus, dev, func, offset); pci_putl(bus, dev, func, offset, base); if (value & PCI_BASE_ROM_ENABLE) value &= PCI_BASE_ROM_ADDR_M; else value = 0; if (value != 0) { regs[nreg].pci_phys_hi = (PCI_ADDR_MEM32 | devloc) + offset; assigned[nasgn].pci_phys_hi = (PCI_RELOCAT_B | PCI_ADDR_MEM32 | devloc) + offset; base &= PCI_BASE_ROM_ADDR_M; assigned[nasgn].pci_phys_low = base; len = ((value ^ (value-1)) + 1) >> 1; regs[nreg].pci_size_low = assigned[nasgn].pci_size_low = len; nreg++, nasgn++; /* take it out of the memory resource */ if (*mem_res && base != 0) (void) memlist_remove(mem_res, (uint64_t)base, (uint64_t)len); } /* * The following are ISA resources. There are not part * of the PCI local bus resources. So don't attempt to * do resource accounting against PCI. */ /* add the three hard-decode, aliased address spaces for VGA */ if ((baseclass == PCI_CLASS_DISPLAY && subclass == PCI_DISPLAY_VGA) || (baseclass == PCI_CLASS_NONE && subclass == PCI_NONE_VGA)) { /* VGA hard decode 0x3b0-0x3bb */ regs[nreg].pci_phys_hi = assigned[nasgn].pci_phys_hi = (PCI_RELOCAT_B | PCI_ALIAS_B | PCI_ADDR_IO | devloc); regs[nreg].pci_phys_low = assigned[nasgn].pci_phys_low = 0x3b0; regs[nreg].pci_size_low = assigned[nasgn].pci_size_low = 0xc; nreg++, nasgn++; /* VGA hard decode 0x3c0-0x3df */ regs[nreg].pci_phys_hi = assigned[nasgn].pci_phys_hi = (PCI_RELOCAT_B | PCI_ALIAS_B | PCI_ADDR_IO | devloc); regs[nreg].pci_phys_low = assigned[nasgn].pci_phys_low = 0x3c0; regs[nreg].pci_size_low = assigned[nasgn].pci_size_low = 0x20; nreg++, nasgn++; /* Video memory */ regs[nreg].pci_phys_hi = assigned[nasgn].pci_phys_hi = (PCI_RELOCAT_B | PCI_ADDR_MEM32 | devloc); regs[nreg].pci_phys_low = assigned[nasgn].pci_phys_low = 0xa0000; regs[nreg].pci_size_low = assigned[nasgn].pci_size_low = 0x20000; nreg++, nasgn++; } /* add the hard-decode, aliased address spaces for 8514 */ if ((baseclass == PCI_CLASS_DISPLAY) && (subclass == PCI_DISPLAY_VGA) && (progclass & PCI_DISPLAY_IF_8514)) { /* hard decode 0x2e8 */ regs[nreg].pci_phys_hi = assigned[nasgn].pci_phys_hi = (PCI_RELOCAT_B | PCI_ALIAS_B | PCI_ADDR_IO | devloc); regs[nreg].pci_phys_low = assigned[nasgn].pci_phys_low = 0x2e8; regs[nreg].pci_size_low = assigned[nasgn].pci_size_low = 0x1; nreg++, nasgn++; /* hard decode 0x2ea-0x2ef */ regs[nreg].pci_phys_hi = assigned[nasgn].pci_phys_hi = (PCI_RELOCAT_B | PCI_ALIAS_B | PCI_ADDR_IO | devloc); regs[nreg].pci_phys_low = assigned[nasgn].pci_phys_low = 0x2ea; regs[nreg].pci_size_low = assigned[nasgn].pci_size_low = 0x6; nreg++, nasgn++; } done: (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, "reg", (int *)regs, nreg * sizeof (pci_regspec_t) / sizeof (int)); (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, "assigned-addresses", (int *)assigned, nasgn * sizeof (pci_regspec_t) / sizeof (int)); if (config_op == CONFIG_NEW && enable) { cmn_err(CE_NOTE, "!enable PCI device [%d/%d/%d]", bus, dev, func); cmd_reg = pci_getw(bus, dev, func, PCI_CONF_COMM); cmd_reg |= (enable | PCI_COMM_ME); pci_putw(bus, dev, func, PCI_CONF_COMM, cmd_reg); } return (reprogram); } static void add_ppb_props(dev_info_t *dip, uchar_t bus, uchar_t dev, uchar_t func, int pciex) { char *dev_type; int i; uint_t val, io_range[2], mem_range[2], pmem_range[2]; uchar_t secbus = pci_getb(bus, dev, func, PCI_BCNF_SECBUS); uchar_t subbus = pci_getb(bus, dev, func, PCI_BCNF_SUBBUS); ASSERT(secbus <= subbus); /* * Some BIOSes lie about max pci busses, we allow for * such mistakes here */ if (subbus > pci_bios_nbus) { pci_bios_nbus = subbus; alloc_res_array(); } ASSERT(pci_bus_res[secbus].dip == NULL); pci_bus_res[secbus].dip = dip; pci_bus_res[secbus].par_bus = bus; dev_type = pciex ? "pciex" : "pci"; /* setup bus number hierarchy */ pci_bus_res[secbus].sub_bus = subbus; /* * Keep track of the largest subordinate bus number (this is essential * for peer busses because there is no other way of determining its * subordinate bus number). */ if (subbus > pci_bus_res[bus].sub_bus) pci_bus_res[bus].sub_bus = subbus; /* * Loop through subordinate busses, initializing their parent bus * field to this bridge's parent. The subordinate busses' parent * fields may very well be further refined later, as child bridges * are enumerated. (The value is to note that the subordinate busses * are not peer busses by changing their par_bus fields to anything * other than -1.) */ for (i = secbus + 1; i <= subbus; i++) pci_bus_res[i].par_bus = bus; (void) ndi_prop_update_string(DDI_DEV_T_NONE, dip, "device_type", dev_type); (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, "#address-cells", 3); (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, "#size-cells", 2); /* * According to PPB spec, the base register should be programmed * with a value bigger than the limit register when there are * no resources available. This applies to io, memory, and * prefetchable memory. */ /* * io range * We determine i/o windows that are left unconfigured by bios * through its i/o enable bit as Microsoft recommends OEMs to do. * If it is unset, we disable i/o and mark it for reconfiguration in * later passes by setting the base > limit */ val = (uint_t)pci_getw(bus, dev, func, PCI_CONF_COMM); if (val & PCI_COMM_IO) { val = (uint_t)pci_getb(bus, dev, func, PCI_BCNF_IO_BASE_LOW); io_range[0] = ((val & 0xf0) << 8); val = (uint_t)pci_getb(bus, dev, func, PCI_BCNF_IO_LIMIT_LOW); io_range[1] = ((val & 0xf0) << 8) | 0xFFF; } else { io_range[0] = 0x9fff; io_range[1] = 0x1000; pci_putb(bus, dev, func, PCI_BCNF_IO_BASE_LOW, (uint8_t)((io_range[0] >> 8) & 0xf0)); pci_putb(bus, dev, func, PCI_BCNF_IO_LIMIT_LOW, (uint8_t)((io_range[1] >> 8) & 0xf0)); pci_putw(bus, dev, func, PCI_BCNF_IO_BASE_HI, 0); pci_putw(bus, dev, func, PCI_BCNF_IO_LIMIT_HI, 0); } if (io_range[0] != 0 && io_range[0] < io_range[1]) { memlist_insert(&pci_bus_res[secbus].io_ports, (uint64_t)io_range[0], (uint64_t)(io_range[1] - io_range[0] + 1)); if (pci_bus_res[bus].io_ports != NULL) { (void) memlist_remove(&pci_bus_res[bus].io_ports, (uint64_t)io_range[0], (uint64_t)(io_range[1] - io_range[0] + 1)); } dcmn_err(CE_NOTE, "bus %d io-range: 0x%x-%x", secbus, io_range[0], io_range[1]); /* if 32-bit supported, make sure upper bits are not set */ if ((val & 0xf) == 1 && pci_getw(bus, dev, func, PCI_BCNF_IO_BASE_HI)) { cmn_err(CE_NOTE, "unsupported 32-bit IO address on" " pci-pci bridge [%d/%d/%d]", bus, dev, func); } } /* mem range */ val = (uint_t)pci_getw(bus, dev, func, PCI_BCNF_MEM_BASE); mem_range[0] = ((val & 0xFFF0) << 16); val = (uint_t)pci_getw(bus, dev, func, PCI_BCNF_MEM_LIMIT); mem_range[1] = ((val & 0xFFF0) << 16) | 0xFFFFF; if (mem_range[0] != 0 && mem_range[0] < mem_range[1]) { memlist_insert(&pci_bus_res[secbus].mem_space, (uint64_t)mem_range[0], (uint64_t)(mem_range[1] - mem_range[0] + 1)); /* remove from parent resouce list */ if (pci_bus_res[bus].mem_space != NULL) { (void) memlist_remove(&pci_bus_res[bus].mem_space, (uint64_t)mem_range[0], (uint64_t)(mem_range[1] - mem_range[0] + 1)); } dcmn_err(CE_NOTE, "bus %d mem-range: 0x%x-%x", secbus, mem_range[0], mem_range[1]); } /* prefetchable memory range */ val = (uint_t)pci_getw(bus, dev, func, PCI_BCNF_PF_BASE_LOW); pmem_range[0] = ((val & 0xFFF0) << 16); val = (uint_t)pci_getw(bus, dev, func, PCI_BCNF_PF_LIMIT_LOW); pmem_range[1] = ((val & 0xFFF0) << 16) | 0xFFFFF; if (pmem_range[0] != 0 && pmem_range[0] < pmem_range[1]) { memlist_insert(&pci_bus_res[secbus].pmem_space, (uint64_t)pmem_range[0], (uint64_t)(pmem_range[1] - pmem_range[0] + 1)); if (pci_bus_res[bus].pmem_space != NULL) { (void) memlist_remove(&pci_bus_res[bus].pmem_space, (uint64_t)pmem_range[0], (uint64_t)(pmem_range[1] - pmem_range[0] + 1)); } dcmn_err(CE_NOTE, "bus %d pmem-range: 0x%x-%x", secbus, pmem_range[0], pmem_range[1]); /* if 64-bit supported, make sure upper bits are not set */ if ((val & 0xf) == 1 && pci_getl(bus, dev, func, PCI_BCNF_PF_BASE_HIGH)) { cmn_err(CE_NOTE, "unsupported 64-bit prefetch memory on" " pci-pci bridge [%d/%d/%d]", bus, dev, func); } } add_bus_range_prop(secbus); add_ppb_ranges_prop(secbus); } extern const struct pci_class_strings_s class_pci[]; extern int class_pci_items; static void add_model_prop(dev_info_t *dip, uint_t classcode) { const char *desc; int i; uchar_t baseclass = classcode >> 16; uchar_t subclass = (classcode >> 8) & 0xff; uchar_t progclass = classcode & 0xff; if ((baseclass == PCI_CLASS_MASS) && (subclass == PCI_MASS_IDE)) { desc = "IDE controller"; } else { for (desc = 0, i = 0; i < class_pci_items; i++) { if ((baseclass == class_pci[i].base_class) && (subclass == class_pci[i].sub_class) && (progclass == class_pci[i].prog_class)) { desc = class_pci[i].actual_desc; break; } } if (i == class_pci_items) desc = "Unknown class of pci/pnpbios device"; } (void) ndi_prop_update_string(DDI_DEV_T_NONE, dip, "model", (char *)desc); } static void add_bus_range_prop(int bus) { int bus_range[2]; if (pci_bus_res[bus].dip == NULL) return; bus_range[0] = bus; bus_range[1] = pci_bus_res[bus].sub_bus; (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, pci_bus_res[bus].dip, "bus-range", (int *)bus_range, 2); } /* * Add slot-names property for any named pci hot-plug slots */ static void add_bus_slot_names_prop(int bus) { char slotprop[256]; int len; len = pci_slot_names_prop(bus, slotprop, sizeof (slotprop)); if (len > 0) { /* * Only create a peer bus node if this bus may be a peer bus. * It may be a peer bus if the dip is NULL and if par_bus is * -1 (par_bus is -1 if this bus was not found to be * subordinate to any PCI-PCI bridge). * If it's not a peer bus, then the ACPI BBN-handling code * will remove it later. */ if (pci_bus_res[bus].par_bus == (uchar_t)-1 && pci_bus_res[bus].dip == NULL) { create_root_bus_dip(bus); } if (pci_bus_res[bus].dip != NULL) { ASSERT((len % sizeof (int)) == 0); (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, pci_bus_res[bus].dip, "slot-names", (int *)slotprop, len / sizeof (int)); } else { cmn_err(CE_NOTE, "!BIOS BUG: Invalid bus number in PCI " "IRQ routing table; Not adding slot-names " "property for incorrect bus %d", bus); } } } static int memlist_to_range(ppb_ranges_t *rp, struct memlist *entry, int type) { if (entry == NULL) return (0); /* assume 32-bit addresses */ rp->child_high = rp->parent_high = type; rp->child_mid = rp->parent_mid = 0; rp->child_low = rp->parent_low = (uint32_t)entry->address; rp->size_high = 0; rp->size_low = (uint32_t)entry->size; return (1); } static void add_ppb_ranges_prop(int bus) { int i = 0; ppb_ranges_t *rp; rp = kmem_alloc(3 * sizeof (*rp), KM_SLEEP); i = memlist_to_range(&rp[0], pci_bus_res[bus].io_ports, PCI_ADDR_IO | PCI_REG_REL_M); i += memlist_to_range(&rp[i], pci_bus_res[bus].mem_space, PCI_ADDR_MEM32 | PCI_REG_REL_M); i += memlist_to_range(&rp[i], pci_bus_res[bus].pmem_space, PCI_ADDR_MEM32 | PCI_REG_REL_M | PCI_REG_PF_M); if (i != 0) (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, pci_bus_res[bus].dip, "ranges", (int *)rp, i * sizeof (ppb_ranges_t) / sizeof (int)); kmem_free(rp, 3 * sizeof (*rp)); } static int memlist_to_spec(struct pci_phys_spec *sp, struct memlist *list, int type) { int i = 0; while (list) { /* assume 32-bit addresses */ sp->pci_phys_hi = type; sp->pci_phys_mid = 0; sp->pci_phys_low = (uint32_t)list->address; sp->pci_size_hi = 0; sp->pci_size_low = (uint32_t)list->size; list = list->next; sp++, i++; } return (i); } static void add_bus_available_prop(int bus) { int i, count; struct pci_phys_spec *sp; count = memlist_count(pci_bus_res[bus].io_ports) + memlist_count(pci_bus_res[bus].mem_space) + memlist_count(pci_bus_res[bus].pmem_space); if (count == 0) /* nothing available */ return; sp = kmem_alloc(count * sizeof (*sp), KM_SLEEP); i = memlist_to_spec(&sp[0], pci_bus_res[bus].io_ports, PCI_ADDR_IO | PCI_REG_REL_M); i += memlist_to_spec(&sp[i], pci_bus_res[bus].mem_space, PCI_ADDR_MEM32 | PCI_REG_REL_M); i += memlist_to_spec(&sp[i], pci_bus_res[bus].pmem_space, PCI_ADDR_MEM32 | PCI_REG_REL_M | PCI_REG_PF_M); ASSERT(i == count); (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, pci_bus_res[bus].dip, "available", (int *)sp, i * sizeof (struct pci_phys_spec) / sizeof (int)); kmem_free(sp, count * sizeof (*sp)); } static void alloc_res_array(void) { static int array_max = 0; int old_max; void *old_res; if (array_max > pci_bios_nbus + 1) return; /* array is big enough */ old_max = array_max; old_res = pci_bus_res; if (array_max == 0) array_max = 16; /* start with a reasonable number */ while (array_max < pci_bios_nbus + 1) array_max <<= 1; pci_bus_res = (struct pci_bus_resource *)kmem_zalloc( array_max * sizeof (struct pci_bus_resource), KM_SLEEP); if (old_res) { /* copy content and free old array */ bcopy(old_res, pci_bus_res, old_max * sizeof (struct pci_bus_resource)); kmem_free(old_res, old_max * sizeof (struct pci_bus_resource)); } } static void create_ioapic_node(int bus, int dev, int fn, ushort_t vendorid, ushort_t deviceid) { static dev_info_t *ioapicsnode = NULL; static int numioapics = 0; dev_info_t *ioapic_node; uint64_t physaddr; uint32_t lobase, hibase = 0; /* BAR 0 contains the IOAPIC's memory-mapped I/O address */ lobase = (*pci_getl_func)(bus, dev, fn, PCI_CONF_BASE0); /* We (and the rest of the world) only support memory-mapped IOAPICs */ if ((lobase & PCI_BASE_SPACE_M) != PCI_BASE_SPACE_MEM) return; if ((lobase & PCI_BASE_TYPE_M) == PCI_BASE_TYPE_ALL) hibase = (*pci_getl_func)(bus, dev, fn, PCI_CONF_BASE0 + 4); lobase &= PCI_BASE_M_ADDR_M; physaddr = (((uint64_t)hibase) << 32) | lobase; /* * Create a nexus node for all IOAPICs under the root node. */ if (ioapicsnode == NULL) { if (ndi_devi_alloc(ddi_root_node(), IOAPICS_NODE_NAME, (pnode_t)DEVI_SID_NODEID, &ioapicsnode) != NDI_SUCCESS) { return; } (void) ndi_devi_online(ioapicsnode, 0); } /* * Create a child node for this IOAPIC */ ioapic_node = ddi_add_child(ioapicsnode, IOAPICS_CHILD_NAME, DEVI_SID_NODEID, numioapics++); if (ioapic_node == NULL) { return; } /* Vendor and Device ID */ (void) ndi_prop_update_int(DDI_DEV_T_NONE, ioapic_node, IOAPICS_PROP_VENID, vendorid); (void) ndi_prop_update_int(DDI_DEV_T_NONE, ioapic_node, IOAPICS_PROP_DEVID, deviceid); /* device_type */ (void) ndi_prop_update_string(DDI_DEV_T_NONE, ioapic_node, "device_type", IOAPICS_DEV_TYPE); /* reg */ (void) ndi_prop_update_int64(DDI_DEV_T_NONE, ioapic_node, "reg", physaddr); }