/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2010 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. * * Copyright (c) 2010, Intel Corporation. * All rights reserved. * * Copyright 2018 Joyent, Inc. All rights reserved. */ /* * This file contains the functionality that mimics the boot operations * on SPARC systems or the old boot.bin/multiboot programs on x86 systems. * The x86 kernel now does everything on its own. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef __xpv #include #include #endif #include #include #include #include #include #include #include #include #include /* For DDI prop types */ static int have_console = 0; /* set once primitive console is initialized */ static char *boot_args = ""; /* * Debugging macros */ static uint_t kbm_debug = 0; #define DBG_MSG(s) { if (kbm_debug) bop_printf(NULL, "%s", s); } #define DBG(x) { if (kbm_debug) \ bop_printf(NULL, "%s is %" PRIx64 "\n", #x, (uint64_t)(x)); \ } #define PUT_STRING(s) { \ char *cp; \ for (cp = (s); *cp; ++cp) \ bcons_putchar(*cp); \ } /* callback to boot_fb to set shadow frame buffer */ extern void boot_fb_shadow_init(bootops_t *); bootops_t bootop; /* simple bootops we'll pass on to kernel */ struct bsys_mem bm; /* * Boot info from "glue" code in low memory. xbootp is used by: * do_bop_phys_alloc(), do_bsys_alloc() and boot_prop_finish(). */ static struct xboot_info *xbootp; static uintptr_t next_virt; /* next available virtual address */ static paddr_t next_phys; /* next available physical address from dboot */ static paddr_t high_phys = -(paddr_t)1; /* last used physical address */ /* * buffer for vsnprintf for console I/O */ #define BUFFERSIZE 512 static char buffer[BUFFERSIZE]; /* * stuff to store/report/manipulate boot property settings. */ typedef struct bootprop { struct bootprop *bp_next; char *bp_name; int bp_flags; /* DDI prop type */ uint_t bp_vlen; /* 0 for boolean */ char *bp_value; } bootprop_t; static bootprop_t *bprops = NULL; static char *curr_page = NULL; /* ptr to avail bprop memory */ static int curr_space = 0; /* amount of memory at curr_page */ #ifdef __xpv start_info_t *xen_info; shared_info_t *HYPERVISOR_shared_info; #endif /* * some allocator statistics */ static ulong_t total_bop_alloc_scratch = 0; static ulong_t total_bop_alloc_kernel = 0; static void build_firmware_properties(struct xboot_info *); static int early_allocation = 1; int force_fastreboot = 0; volatile int fastreboot_onpanic = 0; int post_fastreboot = 0; #ifdef __xpv volatile int fastreboot_capable = 0; #else volatile int fastreboot_capable = 1; #endif /* * Information saved from current boot for fast reboot. * If the information size exceeds what we have allocated, fast reboot * will not be supported. */ multiboot_info_t saved_mbi; mb_memory_map_t saved_mmap[FASTBOOT_SAVED_MMAP_COUNT]; uint8_t saved_drives[FASTBOOT_SAVED_DRIVES_SIZE]; char saved_cmdline[FASTBOOT_SAVED_CMDLINE_LEN]; int saved_cmdline_len = 0; size_t saved_file_size[FASTBOOT_MAX_FILES_MAP]; /* * Turn off fastreboot_onpanic to avoid panic loop. */ char fastreboot_onpanic_cmdline[FASTBOOT_SAVED_CMDLINE_LEN]; static const char fastreboot_onpanic_args[] = " -B fastreboot_onpanic=0"; /* * Pointers to where System Resource Affinity Table (SRAT), System Locality * Information Table (SLIT) and Maximum System Capability Table (MSCT) * are mapped into virtual memory */ ACPI_TABLE_SRAT *srat_ptr = NULL; ACPI_TABLE_SLIT *slit_ptr = NULL; ACPI_TABLE_MSCT *msct_ptr = NULL; /* * Arbitrary limit on number of localities we handle; if * this limit is raised to more than UINT16_MAX, make sure * process_slit() knows how to handle it. */ #define SLIT_LOCALITIES_MAX (4096) #define SLIT_NUM_PROPNAME "acpi-slit-localities" #define SLIT_PROPNAME "acpi-slit" /* * Allocate aligned physical memory at boot time. This allocator allocates * from the highest possible addresses. This avoids exhausting memory that * would be useful for DMA buffers. */ paddr_t do_bop_phys_alloc(uint64_t size, uint64_t align) { paddr_t pa = 0; paddr_t start; paddr_t end; struct memlist *ml = (struct memlist *)xbootp->bi_phys_install; /* * Be careful if high memory usage is limited in startup.c * Since there are holes in the low part of the physical address * space we can treat physmem as a pfn (not just a pgcnt) and * get a conservative upper limit. */ if (physmem != 0 && high_phys > pfn_to_pa(physmem)) high_phys = pfn_to_pa(physmem); /* * find the highest available memory in physinstalled */ size = P2ROUNDUP(size, align); for (; ml; ml = ml->ml_next) { start = P2ROUNDUP(ml->ml_address, align); end = P2ALIGN(ml->ml_address + ml->ml_size, align); if (start < next_phys) start = P2ROUNDUP(next_phys, align); if (end > high_phys) end = P2ALIGN(high_phys, align); if (end <= start) continue; if (end - start < size) continue; /* * Early allocations need to use low memory, since * physmem might be further limited by bootenv.rc */ if (early_allocation) { if (pa == 0 || start < pa) pa = start; } else { if (end - size > pa) pa = end - size; } } if (pa != 0) { if (early_allocation) next_phys = pa + size; else high_phys = pa; return (pa); } bop_panic("do_bop_phys_alloc(0x%" PRIx64 ", 0x%" PRIx64 ") Out of memory\n", size, align); /*NOTREACHED*/ } uintptr_t alloc_vaddr(size_t size, paddr_t align) { uintptr_t rv; next_virt = P2ROUNDUP(next_virt, (uintptr_t)align); rv = (uintptr_t)next_virt; next_virt += size; return (rv); } /* * Allocate virtual memory. The size is always rounded up to a multiple * of base pagesize. */ /*ARGSUSED*/ static caddr_t do_bsys_alloc(bootops_t *bop, caddr_t virthint, size_t size, int align) { paddr_t a = align; /* same type as pa for masking */ uint_t pgsize; paddr_t pa; uintptr_t va; ssize_t s; /* the aligned size */ uint_t level; uint_t is_kernel = (virthint != 0); if (a < MMU_PAGESIZE) a = MMU_PAGESIZE; else if (!ISP2(a)) prom_panic("do_bsys_alloc() incorrect alignment"); size = P2ROUNDUP(size, MMU_PAGESIZE); /* * Use the next aligned virtual address if we weren't given one. */ if (virthint == NULL) { virthint = (caddr_t)alloc_vaddr(size, a); total_bop_alloc_scratch += size; } else { total_bop_alloc_kernel += size; } /* * allocate the physical memory */ pa = do_bop_phys_alloc(size, a); /* * Add the mappings to the page tables, try large pages first. */ va = (uintptr_t)virthint; s = size; level = 1; pgsize = xbootp->bi_use_pae ? TWO_MEG : FOUR_MEG; if (xbootp->bi_use_largepage && a == pgsize) { while (IS_P2ALIGNED(pa, pgsize) && IS_P2ALIGNED(va, pgsize) && s >= pgsize) { kbm_map(va, pa, level, is_kernel); va += pgsize; pa += pgsize; s -= pgsize; } } /* * Map remaining pages use small mappings */ level = 0; pgsize = MMU_PAGESIZE; while (s > 0) { kbm_map(va, pa, level, is_kernel); va += pgsize; pa += pgsize; s -= pgsize; } return (virthint); } /* * Free virtual memory - we'll just ignore these. */ /*ARGSUSED*/ static void do_bsys_free(bootops_t *bop, caddr_t virt, size_t size) { bop_printf(NULL, "do_bsys_free(virt=0x%p, size=0x%lx) ignored\n", (void *)virt, size); } /* * Old interface */ /*ARGSUSED*/ static caddr_t do_bsys_ealloc(bootops_t *bop, caddr_t virthint, size_t size, int align, int flags) { prom_panic("unsupported call to BOP_EALLOC()\n"); return (0); } static void bsetprop(int flags, char *name, int nlen, void *value, int vlen) { uint_t size; uint_t need_size; bootprop_t *b; /* * align the size to 16 byte boundary */ size = sizeof (bootprop_t) + nlen + 1 + vlen; size = (size + 0xf) & ~0xf; if (size > curr_space) { need_size = (size + (MMU_PAGEOFFSET)) & MMU_PAGEMASK; curr_page = do_bsys_alloc(NULL, 0, need_size, MMU_PAGESIZE); curr_space = need_size; } /* * use a bootprop_t at curr_page and link into list */ b = (bootprop_t *)curr_page; curr_page += sizeof (bootprop_t); curr_space -= sizeof (bootprop_t); b->bp_next = bprops; bprops = b; /* * follow by name and ending zero byte */ b->bp_name = curr_page; bcopy(name, curr_page, nlen); curr_page += nlen; *curr_page++ = 0; curr_space -= nlen + 1; /* * set the property type */ b->bp_flags = flags & DDI_PROP_TYPE_MASK; /* * copy in value, but no ending zero byte */ b->bp_value = curr_page; b->bp_vlen = vlen; if (vlen > 0) { bcopy(value, curr_page, vlen); curr_page += vlen; curr_space -= vlen; } /* * align new values of curr_page, curr_space */ while (curr_space & 0xf) { ++curr_page; --curr_space; } } static void bsetprops(char *name, char *value) { bsetprop(DDI_PROP_TYPE_STRING, name, strlen(name), value, strlen(value) + 1); } static void bsetprop32(char *name, uint32_t value) { bsetprop(DDI_PROP_TYPE_INT, name, strlen(name), (void *)&value, sizeof (value)); } static void bsetprop64(char *name, uint64_t value) { bsetprop(DDI_PROP_TYPE_INT64, name, strlen(name), (void *)&value, sizeof (value)); } static void bsetpropsi(char *name, int value) { char prop_val[32]; (void) snprintf(prop_val, sizeof (prop_val), "%d", value); bsetprops(name, prop_val); } /* * to find the type of the value associated with this name */ /*ARGSUSED*/ int do_bsys_getproptype(bootops_t *bop, const char *name) { bootprop_t *b; for (b = bprops; b != NULL; b = b->bp_next) { if (strcmp(name, b->bp_name) != 0) continue; return (b->bp_flags); } return (-1); } /* * to find the size of the buffer to allocate */ /*ARGSUSED*/ int do_bsys_getproplen(bootops_t *bop, const char *name) { bootprop_t *b; for (b = bprops; b; b = b->bp_next) { if (strcmp(name, b->bp_name) != 0) continue; return (b->bp_vlen); } return (-1); } /* * get the value associated with this name */ /*ARGSUSED*/ int do_bsys_getprop(bootops_t *bop, const char *name, void *value) { bootprop_t *b; for (b = bprops; b; b = b->bp_next) { if (strcmp(name, b->bp_name) != 0) continue; bcopy(b->bp_value, value, b->bp_vlen); return (0); } return (-1); } /* * get the name of the next property in succession from the standalone */ /*ARGSUSED*/ static char * do_bsys_nextprop(bootops_t *bop, char *name) { bootprop_t *b; /* * A null name is a special signal for the 1st boot property */ if (name == NULL || strlen(name) == 0) { if (bprops == NULL) return (NULL); return (bprops->bp_name); } for (b = bprops; b; b = b->bp_next) { if (name != b->bp_name) continue; b = b->bp_next; if (b == NULL) return (NULL); return (b->bp_name); } return (NULL); } /* * Parse numeric value from a string. Understands decimal, hex, octal, - and ~ */ static int parse_value(char *p, uint64_t *retval) { int adjust = 0; uint64_t tmp = 0; int digit; int radix = 10; *retval = 0; if (*p == '-' || *p == '~') adjust = *p++; if (*p == '0') { ++p; if (*p == 0) return (0); if (*p == 'x' || *p == 'X') { radix = 16; ++p; } else { radix = 8; ++p; } } while (*p) { if ('0' <= *p && *p <= '9') digit = *p - '0'; else if ('a' <= *p && *p <= 'f') digit = 10 + *p - 'a'; else if ('A' <= *p && *p <= 'F') digit = 10 + *p - 'A'; else return (-1); if (digit >= radix) return (-1); tmp = tmp * radix + digit; ++p; } if (adjust == '-') tmp = -tmp; else if (adjust == '~') tmp = ~tmp; *retval = tmp; return (0); } static boolean_t unprintable(char *value, int size) { int i; if (size <= 0 || value[0] == '\0') return (B_TRUE); for (i = 0; i < size; i++) { if (value[i] == '\0') return (i != (size - 1)); if (!isprint(value[i])) return (B_TRUE); } return (B_FALSE); } /* * Print out information about all boot properties. * buffer is pointer to pre-allocated space to be used as temporary * space for property values. */ static void boot_prop_display(char *buffer) { char *name = ""; int i, len, flags, *buf32; int64_t *buf64; bop_printf(NULL, "\nBoot properties:\n"); while ((name = do_bsys_nextprop(NULL, name)) != NULL) { bop_printf(NULL, "\t0x%p %s = ", (void *)name, name); (void) do_bsys_getprop(NULL, name, buffer); len = do_bsys_getproplen(NULL, name); flags = do_bsys_getproptype(NULL, name); bop_printf(NULL, "len=%d ", len); switch (flags) { case DDI_PROP_TYPE_INT: len = len / sizeof (int); buf32 = (int *)buffer; for (i = 0; i < len; i++) { bop_printf(NULL, "%08x", buf32[i]); if (i < len - 1) bop_printf(NULL, "."); } break; case DDI_PROP_TYPE_STRING: bop_printf(NULL, "%s", buffer); break; case DDI_PROP_TYPE_INT64: len = len / sizeof (int64_t); buf64 = (int64_t *)buffer; for (i = 0; i < len; i++) { bop_printf(NULL, "%016" PRIx64, buf64[i]); if (i < len - 1) bop_printf(NULL, "."); } break; default: if (!unprintable(buffer, len)) { buffer[len] = 0; bop_printf(NULL, "%s", buffer); break; } for (i = 0; i < len; i++) { bop_printf(NULL, "%02x", buffer[i] & 0xff); if (i < len - 1) bop_printf(NULL, "."); } break; } bop_printf(NULL, "\n"); } } /* * 2nd part of building the table of boot properties. This includes: * - values from /boot/solaris/bootenv.rc (ie. eeprom(1m) values) * * lines look like one of: * ^$ * ^# comment till end of line * setprop name 'value' * setprop name value * setprop name "value" * * we do single character I/O since this is really just looking at memory */ void boot_prop_finish(void) { int fd; char *line; int c; int bytes_read; char *name; int n_len; char *value; int v_len; char *inputdev; /* these override the command line if serial ports */ char *outputdev; char *consoledev; uint64_t lvalue; int use_xencons = 0; extern int bootrd_debug; #ifdef __xpv if (!DOMAIN_IS_INITDOMAIN(xen_info)) use_xencons = 1; #endif /* __xpv */ DBG_MSG("Opening /boot/solaris/bootenv.rc\n"); fd = BRD_OPEN(bfs_ops, "/boot/solaris/bootenv.rc", 0); DBG(fd); line = do_bsys_alloc(NULL, NULL, MMU_PAGESIZE, MMU_PAGESIZE); while (fd >= 0) { /* * get a line */ for (c = 0; ; ++c) { bytes_read = BRD_READ(bfs_ops, fd, line + c, 1); if (bytes_read == 0) { if (c == 0) goto done; break; } if (line[c] == '\n') break; } line[c] = 0; /* * ignore comment lines */ c = 0; while (ISSPACE(line[c])) ++c; if (line[c] == '#' || line[c] == 0) continue; /* * must have "setprop " or "setprop\t" */ if (strncmp(line + c, "setprop ", 8) != 0 && strncmp(line + c, "setprop\t", 8) != 0) continue; c += 8; while (ISSPACE(line[c])) ++c; if (line[c] == 0) continue; /* * gather up the property name */ name = line + c; n_len = 0; while (line[c] && !ISSPACE(line[c])) ++n_len, ++c; /* * gather up the value, if any */ value = ""; v_len = 0; while (ISSPACE(line[c])) ++c; if (line[c] != 0) { value = line + c; while (line[c] && !ISSPACE(line[c])) ++v_len, ++c; } if (v_len >= 2 && value[0] == value[v_len - 1] && (value[0] == '\'' || value[0] == '"')) { ++value; v_len -= 2; } name[n_len] = 0; if (v_len > 0) value[v_len] = 0; else continue; /* * ignore "boot-file" property, it's now meaningless */ if (strcmp(name, "boot-file") == 0) continue; if (strcmp(name, "boot-args") == 0 && strlen(boot_args) > 0) continue; /* * If a property was explicitly set on the command line * it will override a setting in bootenv.rc */ if (do_bsys_getproplen(NULL, name) >= 0) continue; bsetprops(name, value); } done: if (fd >= 0) (void) BRD_CLOSE(bfs_ops, fd); /* * Check if we have to limit the boot time allocator */ if (do_bsys_getproplen(NULL, "physmem") != -1 && do_bsys_getprop(NULL, "physmem", line) >= 0 && parse_value(line, &lvalue) != -1) { if (0 < lvalue && (lvalue < physmem || physmem == 0)) { physmem = (pgcnt_t)lvalue; DBG(physmem); } } early_allocation = 0; /* * Check for bootrd_debug. */ if (find_boot_prop("bootrd_debug")) bootrd_debug = 1; /* * check to see if we have to override the default value of the console */ if (!use_xencons) { inputdev = line; v_len = do_bsys_getproplen(NULL, "input-device"); if (v_len > 0) (void) do_bsys_getprop(NULL, "input-device", inputdev); else v_len = 0; inputdev[v_len] = 0; outputdev = inputdev + v_len + 1; v_len = do_bsys_getproplen(NULL, "output-device"); if (v_len > 0) (void) do_bsys_getprop(NULL, "output-device", outputdev); else v_len = 0; outputdev[v_len] = 0; consoledev = outputdev + v_len + 1; v_len = do_bsys_getproplen(NULL, "console"); if (v_len > 0) { (void) do_bsys_getprop(NULL, "console", consoledev); if (post_fastreboot && strcmp(consoledev, "graphics") == 0) { bsetprops("console", "text"); v_len = strlen("text"); bcopy("text", consoledev, v_len); } } else { v_len = 0; } consoledev[v_len] = 0; bcons_init2(inputdev, outputdev, consoledev); } else { /* * Ensure console property exists * If not create it as "hypervisor" */ v_len = do_bsys_getproplen(NULL, "console"); if (v_len < 0) bsetprops("console", "hypervisor"); inputdev = outputdev = consoledev = "hypervisor"; bcons_init2(inputdev, outputdev, consoledev); } if (find_boot_prop("prom_debug") || kbm_debug) boot_prop_display(line); } /* * print formatted output */ /*ARGSUSED*/ void vbop_printf(void *ptr, const char *fmt, va_list ap) { if (have_console == 0) return; (void) vsnprintf(buffer, BUFFERSIZE, fmt, ap); PUT_STRING(buffer); } /*PRINTFLIKE2*/ void bop_printf(void *bop, const char *fmt, ...) { va_list ap; va_start(ap, fmt); vbop_printf(bop, fmt, ap); va_end(ap); } /* * Another panic() variant; this one can be used even earlier during boot than * prom_panic(). */ /*PRINTFLIKE1*/ void bop_panic(const char *fmt, ...) { va_list ap; va_start(ap, fmt); bop_printf(NULL, fmt, ap); va_end(ap); bop_printf(NULL, "\nPress any key to reboot.\n"); (void) bcons_getchar(); bop_printf(NULL, "Resetting...\n"); pc_reset(); } /* * Do a real mode interrupt BIOS call */ typedef struct bios_regs { unsigned short ax, bx, cx, dx, si, di, bp, es, ds; } bios_regs_t; typedef int (*bios_func_t)(int, bios_regs_t *); /*ARGSUSED*/ static void do_bsys_doint(bootops_t *bop, int intnum, struct bop_regs *rp) { #if defined(__xpv) prom_panic("unsupported call to BOP_DOINT()\n"); #else /* __xpv */ static int firsttime = 1; bios_func_t bios_func = (bios_func_t)(void *)(uintptr_t)0x5000; bios_regs_t br; /* * We're about to disable paging; we shouldn't be PCID enabled. */ if (getcr4() & CR4_PCIDE) prom_panic("do_bsys_doint() with PCID enabled\n"); /* * The first time we do this, we have to copy the pre-packaged * low memory bios call code image into place. */ if (firsttime) { extern char bios_image[]; extern uint32_t bios_size; bcopy(bios_image, (void *)bios_func, bios_size); firsttime = 0; } br.ax = rp->eax.word.ax; br.bx = rp->ebx.word.bx; br.cx = rp->ecx.word.cx; br.dx = rp->edx.word.dx; br.bp = rp->ebp.word.bp; br.si = rp->esi.word.si; br.di = rp->edi.word.di; br.ds = rp->ds; br.es = rp->es; DBG_MSG("Doing BIOS call..."); DBG(br.ax); DBG(br.bx); DBG(br.dx); rp->eflags = bios_func(intnum, &br); DBG_MSG("done\n"); rp->eax.word.ax = br.ax; rp->ebx.word.bx = br.bx; rp->ecx.word.cx = br.cx; rp->edx.word.dx = br.dx; rp->ebp.word.bp = br.bp; rp->esi.word.si = br.si; rp->edi.word.di = br.di; rp->ds = br.ds; rp->es = br.es; #endif /* __xpv */ } static struct boot_syscalls bop_sysp = { bcons_getchar, bcons_putchar, bcons_ischar, }; static char *whoami; #define BUFLEN 64 #if defined(__xpv) static char namebuf[32]; static void xen_parse_props(char *s, char *prop_map[], int n_prop) { char **prop_name = prop_map; char *cp = s, *scp; do { scp = cp; while ((*cp != NULL) && (*cp != ':')) cp++; if ((scp != cp) && (*prop_name != NULL)) { *cp = NULL; bsetprops(*prop_name, scp); } cp++; prop_name++; n_prop--; } while (n_prop > 0); } #define VBDPATHLEN 64 /* * parse the 'xpv-root' property to create properties used by * ufs_mountroot. */ static void xen_vbdroot_props(char *s) { char vbdpath[VBDPATHLEN] = "/xpvd/xdf@"; const char lnamefix[] = "/dev/dsk/c0d"; char *pnp; char *prop_p; char mi; short minor; long addr = 0; pnp = vbdpath + strlen(vbdpath); prop_p = s + strlen(lnamefix); while ((*prop_p != '\0') && (*prop_p != 's') && (*prop_p != 'p')) addr = addr * 10 + *prop_p++ - '0'; (void) snprintf(pnp, VBDPATHLEN, "%lx", addr); pnp = vbdpath + strlen(vbdpath); if (*prop_p == 's') mi = 'a'; else if (*prop_p == 'p') mi = 'q'; else ASSERT(0); /* shouldn't be here */ prop_p++; ASSERT(*prop_p != '\0'); if (ISDIGIT(*prop_p)) { minor = *prop_p - '0'; prop_p++; if (ISDIGIT(*prop_p)) { minor = minor * 10 + *prop_p - '0'; } } else { /* malformed root path, use 0 as default */ minor = 0; } ASSERT(minor < 16); /* at most 16 partitions */ mi += minor; *pnp++ = ':'; *pnp++ = mi; *pnp++ = '\0'; bsetprops("fstype", "ufs"); bsetprops("bootpath", vbdpath); DBG_MSG("VBD bootpath set to "); DBG_MSG(vbdpath); DBG_MSG("\n"); } /* * parse the xpv-nfsroot property to create properties used by * nfs_mountroot. */ static void xen_nfsroot_props(char *s) { char *prop_map[] = { BP_SERVER_IP, /* server IP address */ BP_SERVER_NAME, /* server hostname */ BP_SERVER_PATH, /* root path */ }; int n_prop = sizeof (prop_map) / sizeof (prop_map[0]); bsetprops("fstype", "nfs"); xen_parse_props(s, prop_map, n_prop); /* * If a server name wasn't specified, use a default. */ if (do_bsys_getproplen(NULL, BP_SERVER_NAME) == -1) bsetprops(BP_SERVER_NAME, "unknown"); } /* * Extract our IP address, etc. from the "xpv-ip" property. */ static void xen_ip_props(char *s) { char *prop_map[] = { BP_HOST_IP, /* IP address */ NULL, /* NFS server IP address (ignored in */ /* favour of xpv-nfsroot) */ BP_ROUTER_IP, /* IP gateway */ BP_SUBNET_MASK, /* IP subnet mask */ "xpv-hostname", /* hostname (ignored) */ BP_NETWORK_INTERFACE, /* interface name */ "xpv-hcp", /* host configuration protocol */ }; int n_prop = sizeof (prop_map) / sizeof (prop_map[0]); char ifname[IFNAMSIZ]; xen_parse_props(s, prop_map, n_prop); /* * A Linux dom0 administrator expects all interfaces to be * called "ethX", which is not the case here. * * If the interface name specified is "eth0", presume that * this is really intended to be "xnf0" (the first domU -> * dom0 interface for this domain). */ if ((do_bsys_getprop(NULL, BP_NETWORK_INTERFACE, ifname) == 0) && (strcmp("eth0", ifname) == 0)) { bsetprops(BP_NETWORK_INTERFACE, "xnf0"); bop_printf(NULL, "network interface name 'eth0' replaced with 'xnf0'\n"); } } #else /* __xpv */ static void setup_rarp_props(struct sol_netinfo *sip) { char buf[BUFLEN]; /* to hold ip/mac addrs */ uint8_t *val; val = (uint8_t *)&sip->sn_ciaddr; (void) snprintf(buf, BUFLEN, "%d.%d.%d.%d", val[0], val[1], val[2], val[3]); bsetprops(BP_HOST_IP, buf); val = (uint8_t *)&sip->sn_siaddr; (void) snprintf(buf, BUFLEN, "%d.%d.%d.%d", val[0], val[1], val[2], val[3]); bsetprops(BP_SERVER_IP, buf); if (sip->sn_giaddr != 0) { val = (uint8_t *)&sip->sn_giaddr; (void) snprintf(buf, BUFLEN, "%d.%d.%d.%d", val[0], val[1], val[2], val[3]); bsetprops(BP_ROUTER_IP, buf); } if (sip->sn_netmask != 0) { val = (uint8_t *)&sip->sn_netmask; (void) snprintf(buf, BUFLEN, "%d.%d.%d.%d", val[0], val[1], val[2], val[3]); bsetprops(BP_SUBNET_MASK, buf); } if (sip->sn_mactype != 4 || sip->sn_maclen != 6) { bop_printf(NULL, "unsupported mac type %d, mac len %d\n", sip->sn_mactype, sip->sn_maclen); } else { val = sip->sn_macaddr; (void) snprintf(buf, BUFLEN, "%x:%x:%x:%x:%x:%x", val[0], val[1], val[2], val[3], val[4], val[5]); bsetprops(BP_BOOT_MAC, buf); } } #endif /* __xpv */ static void build_panic_cmdline(const char *cmd, int cmdlen) { int proplen; size_t arglen; arglen = sizeof (fastreboot_onpanic_args); /* * If we allready have fastreboot-onpanic set to zero, * don't add them again. */ if ((proplen = do_bsys_getproplen(NULL, FASTREBOOT_ONPANIC)) > 0 && proplen <= sizeof (fastreboot_onpanic_cmdline)) { (void) do_bsys_getprop(NULL, FASTREBOOT_ONPANIC, fastreboot_onpanic_cmdline); if (FASTREBOOT_ONPANIC_NOTSET(fastreboot_onpanic_cmdline)) arglen = 1; } /* * construct fastreboot_onpanic_cmdline */ if (cmdlen + arglen > sizeof (fastreboot_onpanic_cmdline)) { DBG_MSG("Command line too long: clearing " FASTREBOOT_ONPANIC "\n"); fastreboot_onpanic = 0; } else { bcopy(cmd, fastreboot_onpanic_cmdline, cmdlen); if (arglen != 1) bcopy(fastreboot_onpanic_args, fastreboot_onpanic_cmdline + cmdlen, arglen); else fastreboot_onpanic_cmdline[cmdlen] = 0; } } #ifndef __xpv /* * Construct boot command line for Fast Reboot. The saved_cmdline * is also reported by "eeprom bootcmd". */ static void build_fastboot_cmdline(struct xboot_info *xbp) { saved_cmdline_len = strlen(xbp->bi_cmdline) + 1; if (saved_cmdline_len > FASTBOOT_SAVED_CMDLINE_LEN) { DBG(saved_cmdline_len); DBG_MSG("Command line too long: clearing fastreboot_capable\n"); fastreboot_capable = 0; } else { bcopy((void *)(xbp->bi_cmdline), (void *)saved_cmdline, saved_cmdline_len); saved_cmdline[saved_cmdline_len - 1] = '\0'; build_panic_cmdline(saved_cmdline, saved_cmdline_len - 1); } } /* * Save memory layout, disk drive information, unix and boot archive sizes for * Fast Reboot. */ static void save_boot_info(struct xboot_info *xbi) { multiboot_info_t *mbi = xbi->bi_mb_info; struct boot_modules *modp; int i; bcopy(mbi, &saved_mbi, sizeof (multiboot_info_t)); if (mbi->mmap_length > sizeof (saved_mmap)) { DBG_MSG("mbi->mmap_length too big: clearing " "fastreboot_capable\n"); fastreboot_capable = 0; } else { bcopy((void *)(uintptr_t)mbi->mmap_addr, (void *)saved_mmap, mbi->mmap_length); } if ((mbi->flags & MB_INFO_DRIVE_INFO) != 0) { if (mbi->drives_length > sizeof (saved_drives)) { DBG(mbi->drives_length); DBG_MSG("mbi->drives_length too big: clearing " "fastreboot_capable\n"); fastreboot_capable = 0; } else { bcopy((void *)(uintptr_t)mbi->drives_addr, (void *)saved_drives, mbi->drives_length); } } else { saved_mbi.drives_length = 0; saved_mbi.drives_addr = NULL; } /* * Current file sizes. Used by fastboot.c to figure out how much * memory to reserve for panic reboot. * Use the module list from the dboot-constructed xboot_info * instead of the list referenced by the multiboot structure * because that structure may not be addressable now. */ saved_file_size[FASTBOOT_NAME_UNIX] = FOUR_MEG - PAGESIZE; for (i = 0, modp = (struct boot_modules *)(uintptr_t)xbi->bi_modules; i < xbi->bi_module_cnt; i++, modp++) { saved_file_size[FASTBOOT_NAME_BOOTARCHIVE] += modp->bm_size; } } #endif /* __xpv */ /* * Import boot environment module variables as properties, applying * blacklist filter for variables we know we will not use. * * Since the environment can be relatively large, containing many variables * used only for boot loader purposes, we will use a blacklist based filter. * To keep the blacklist from growing too large, we use prefix based filtering. * This is possible because in many cases, the loader variable names are * using a structured layout. * * We will not overwrite already set properties. */ static struct bop_blacklist { const char *bl_name; int bl_name_len; } bop_prop_blacklist[] = { { "ISADIR", sizeof ("ISADIR") }, { "acpi", sizeof ("acpi") }, { "autoboot_delay", sizeof ("autoboot_delay") }, { "autoboot_delay", sizeof ("autoboot_delay") }, { "beansi_", sizeof ("beansi_") }, { "beastie", sizeof ("beastie") }, { "bemenu", sizeof ("bemenu") }, { "boot.", sizeof ("boot.") }, { "bootenv", sizeof ("bootenv") }, { "currdev", sizeof ("currdev") }, { "dhcp.", sizeof ("dhcp.") }, { "interpret", sizeof ("interpret") }, { "kernel", sizeof ("kernel") }, { "loaddev", sizeof ("loaddev") }, { "loader_", sizeof ("loader_") }, { "module_path", sizeof ("module_path") }, { "nfs.", sizeof ("nfs.") }, { "pcibios", sizeof ("pcibios") }, { "prompt", sizeof ("prompt") }, { "smbios", sizeof ("smbios") }, { "tem", sizeof ("tem") }, { "twiddle_divisor", sizeof ("twiddle_divisor") }, { "zfs_be", sizeof ("zfs_be") }, }; /* * Match the name against prefixes in above blacklist. If the match was * found, this name is blacklisted. */ static boolean_t name_is_blacklisted(const char *name) { int i, n; n = sizeof (bop_prop_blacklist) / sizeof (bop_prop_blacklist[0]); for (i = 0; i < n; i++) { if (strncmp(bop_prop_blacklist[i].bl_name, name, bop_prop_blacklist[i].bl_name_len - 1) == 0) { return (B_TRUE); } } return (B_FALSE); } static void process_boot_environment(struct boot_modules *benv) { char *env, *ptr, *name, *value; uint32_t size, name_len, value_len; if (benv == NULL || benv->bm_type != BMT_ENV) return; ptr = env = benv->bm_addr; size = benv->bm_size; do { name = ptr; /* find '=' */ while (*ptr != '=') { ptr++; if (ptr > env + size) /* Something is very wrong. */ return; } name_len = ptr - name; if (sizeof (buffer) <= name_len) continue; (void) strncpy(buffer, name, sizeof (buffer)); buffer[name_len] = '\0'; name = buffer; value_len = 0; value = ++ptr; while ((uintptr_t)ptr - (uintptr_t)env < size) { if (*ptr == '\0') { ptr++; value_len = (uintptr_t)ptr - (uintptr_t)env; break; } ptr++; } /* Did we reach the end of the module? */ if (value_len == 0) return; if (*value == '\0') continue; /* Is this property already set? */ if (do_bsys_getproplen(NULL, name) >= 0) continue; /* Translate netboot variables */ if (strcmp(name, "boot.netif.gateway") == 0) { bsetprops(BP_ROUTER_IP, value); continue; } if (strcmp(name, "boot.netif.hwaddr") == 0) { bsetprops(BP_BOOT_MAC, value); continue; } if (strcmp(name, "boot.netif.ip") == 0) { bsetprops(BP_HOST_IP, value); continue; } if (strcmp(name, "boot.netif.netmask") == 0) { bsetprops(BP_SUBNET_MASK, value); continue; } if (strcmp(name, "boot.netif.server") == 0) { bsetprops(BP_SERVER_IP, value); continue; } if (strcmp(name, "boot.netif.server") == 0) { if (do_bsys_getproplen(NULL, BP_SERVER_IP) < 0) bsetprops(BP_SERVER_IP, value); continue; } if (strcmp(name, "boot.nfsroot.server") == 0) { if (do_bsys_getproplen(NULL, BP_SERVER_IP) < 0) bsetprops(BP_SERVER_IP, value); continue; } if (strcmp(name, "boot.nfsroot.path") == 0) { bsetprops(BP_SERVER_PATH, value); continue; } if (name_is_blacklisted(name) == B_TRUE) continue; /* Create new property. */ bsetprops(name, value); /* Avoid reading past the module end. */ if (size <= (uintptr_t)ptr - (uintptr_t)env) return; } while (*ptr != '\0'); } /* * 1st pass at building the table of boot properties. This includes: * - values set on the command line: -B a=x,b=y,c=z .... * - known values we just compute (ie. from xbp) * - values from /boot/solaris/bootenv.rc (ie. eeprom(1m) values) * * the grub command line looked like: * kernel boot-file [-B prop=value[,prop=value]...] [boot-args] * * whoami is the same as boot-file */ static void build_boot_properties(struct xboot_info *xbp) { char *name; int name_len; char *value; int value_len; struct boot_modules *bm, *rdbm, *benv = NULL; char *propbuf; int quoted = 0; int boot_arg_len; uint_t i, midx; char modid[32]; #ifndef __xpv static int stdout_val = 0; uchar_t boot_device; char str[3]; #endif /* * These have to be done first, so that kobj_mount_root() works */ DBG_MSG("Building boot properties\n"); propbuf = do_bsys_alloc(NULL, NULL, MMU_PAGESIZE, 0); DBG((uintptr_t)propbuf); if (xbp->bi_module_cnt > 0) { bm = xbp->bi_modules; rdbm = NULL; for (midx = i = 0; i < xbp->bi_module_cnt; i++) { if (bm[i].bm_type == BMT_ROOTFS) { rdbm = &bm[i]; continue; } if (bm[i].bm_type == BMT_HASH || bm[i].bm_name == NULL) continue; if (bm[i].bm_type == BMT_ENV) { if (benv == NULL) benv = &bm[i]; else continue; } (void) snprintf(modid, sizeof (modid), "module-name-%u", midx); bsetprops(modid, (char *)bm[i].bm_name); (void) snprintf(modid, sizeof (modid), "module-addr-%u", midx); bsetprop64(modid, (uint64_t)(uintptr_t)bm[i].bm_addr); (void) snprintf(modid, sizeof (modid), "module-size-%u", midx); bsetprop64(modid, (uint64_t)bm[i].bm_size); ++midx; } if (rdbm != NULL) { bsetprop64("ramdisk_start", (uint64_t)(uintptr_t)rdbm->bm_addr); bsetprop64("ramdisk_end", (uint64_t)(uintptr_t)rdbm->bm_addr + rdbm->bm_size); } } /* * If there are any boot time modules or hashes present, then disable * fast reboot. */ if (xbp->bi_module_cnt > 1) { fastreboot_disable(FBNS_BOOTMOD); } #ifndef __xpv /* * Disable fast reboot if we're using the Multiboot 2 boot protocol, * since we don't currently support MB2 info and module relocation. * Note that fast reboot will have already been disabled if multiple * modules are present, since the current implementation assumes that * we only have a single module, the boot_archive. */ if (xbp->bi_mb_version != 1) { fastreboot_disable(FBNS_MULTIBOOT2); } #endif DBG_MSG("Parsing command line for boot properties\n"); value = xbp->bi_cmdline; /* * allocate memory to collect boot_args into */ boot_arg_len = strlen(xbp->bi_cmdline) + 1; boot_args = do_bsys_alloc(NULL, NULL, boot_arg_len, MMU_PAGESIZE); boot_args[0] = 0; boot_arg_len = 0; #ifdef __xpv /* * Xen puts a lot of device information in front of the kernel name * let's grab them and make them boot properties. The first * string w/o an "=" in it will be the boot-file property. */ (void) strcpy(namebuf, "xpv-"); for (;;) { /* * get to next property */ while (ISSPACE(*value)) ++value; name = value; /* * look for an "=" */ while (*value && !ISSPACE(*value) && *value != '=') { value++; } if (*value != '=') { /* no "=" in the property */ value = name; break; } name_len = value - name; value_len = 0; /* * skip over the "=" */ value++; while (value[value_len] && !ISSPACE(value[value_len])) { ++value_len; } /* * build property name with "xpv-" prefix */ if (name_len + 4 > 32) { /* skip if name too long */ value += value_len; continue; } bcopy(name, &namebuf[4], name_len); name_len += 4; namebuf[name_len] = 0; bcopy(value, propbuf, value_len); propbuf[value_len] = 0; bsetprops(namebuf, propbuf); /* * xpv-root is set to the logical disk name of the xen * VBD when booting from a disk-based filesystem. */ if (strcmp(namebuf, "xpv-root") == 0) xen_vbdroot_props(propbuf); /* * While we're here, if we have a "xpv-nfsroot" property * then we need to set "fstype" to "nfs" so we mount * our root from the nfs server. Also parse the xpv-nfsroot * property to create the properties that nfs_mountroot will * need to find the root and mount it. */ if (strcmp(namebuf, "xpv-nfsroot") == 0) xen_nfsroot_props(propbuf); if (strcmp(namebuf, "xpv-ip") == 0) xen_ip_props(propbuf); value += value_len; } #endif while (ISSPACE(*value)) ++value; /* * value now points at the boot-file */ value_len = 0; while (value[value_len] && !ISSPACE(value[value_len])) ++value_len; if (value_len > 0) { whoami = propbuf; bcopy(value, whoami, value_len); whoami[value_len] = 0; bsetprops("boot-file", whoami); /* * strip leading path stuff from whoami, so running from * PXE/miniroot makes sense. */ if (strstr(whoami, "/platform/") != NULL) whoami = strstr(whoami, "/platform/"); bsetprops("whoami", whoami); } /* * Values forcibly set boot properties on the command line via -B. * Allow use of quotes in values. Other stuff goes on kernel * command line. */ name = value + value_len; while (*name != 0) { /* * anything not " -B" is copied to the command line */ if (!ISSPACE(name[0]) || name[1] != '-' || name[2] != 'B') { boot_args[boot_arg_len++] = *name; boot_args[boot_arg_len] = 0; ++name; continue; } /* * skip the " -B" and following white space */ name += 3; while (ISSPACE(*name)) ++name; while (*name && !ISSPACE(*name)) { value = strstr(name, "="); if (value == NULL) break; name_len = value - name; ++value; value_len = 0; quoted = 0; for (; ; ++value_len) { if (!value[value_len]) break; /* * is this value quoted? */ if (value_len == 0 && (value[0] == '\'' || value[0] == '"')) { quoted = value[0]; ++value_len; } /* * In the quote accept any character, * but look for ending quote. */ if (quoted) { if (value[value_len] == quoted) quoted = 0; continue; } /* * a comma or white space ends the value */ if (value[value_len] == ',' || ISSPACE(value[value_len])) break; } if (value_len == 0) { bsetprop(DDI_PROP_TYPE_ANY, name, name_len, NULL, 0); } else { char *v = value; int l = value_len; if (v[0] == v[l - 1] && (v[0] == '\'' || v[0] == '"')) { ++v; l -= 2; } bcopy(v, propbuf, l); propbuf[l] = '\0'; bsetprop(DDI_PROP_TYPE_STRING, name, name_len, propbuf, l + 1); } name = value + value_len; while (*name == ',') ++name; } } /* * set boot-args property * 1275 name is bootargs, so set * that too */ bsetprops("boot-args", boot_args); bsetprops("bootargs", boot_args); process_boot_environment(benv); #ifndef __xpv /* * Build boot command line for Fast Reboot */ build_fastboot_cmdline(xbp); if (xbp->bi_mb_version == 1) { multiboot_info_t *mbi = xbp->bi_mb_info; int netboot; struct sol_netinfo *sip; /* * set the BIOS boot device from GRUB */ netboot = 0; /* * Save various boot information for Fast Reboot */ save_boot_info(xbp); if (mbi != NULL && mbi->flags & MB_INFO_BOOTDEV) { boot_device = mbi->boot_device >> 24; if (boot_device == 0x20) netboot++; str[0] = (boot_device >> 4) + '0'; str[1] = (boot_device & 0xf) + '0'; str[2] = 0; bsetprops("bios-boot-device", str); } else { netboot = 1; } /* * In the netboot case, drives_info is overloaded with the * dhcp ack. This is not multiboot compliant and requires * special pxegrub! */ if (netboot && mbi->drives_length != 0) { sip = (struct sol_netinfo *)(uintptr_t)mbi->drives_addr; if (sip->sn_infotype == SN_TYPE_BOOTP) bsetprop(DDI_PROP_TYPE_BYTE, "bootp-response", sizeof ("bootp-response"), (void *)(uintptr_t)mbi->drives_addr, mbi->drives_length); else if (sip->sn_infotype == SN_TYPE_RARP) setup_rarp_props(sip); } } else { multiboot2_info_header_t *mbi = xbp->bi_mb_info; multiboot_tag_bootdev_t *bootdev = NULL; multiboot_tag_network_t *netdev = NULL; if (mbi != NULL) { bootdev = dboot_multiboot2_find_tag(mbi, MULTIBOOT_TAG_TYPE_BOOTDEV); netdev = dboot_multiboot2_find_tag(mbi, MULTIBOOT_TAG_TYPE_NETWORK); } if (bootdev != NULL) { DBG(bootdev->mb_biosdev); boot_device = bootdev->mb_biosdev; str[0] = (boot_device >> 4) + '0'; str[1] = (boot_device & 0xf) + '0'; str[2] = 0; bsetprops("bios-boot-device", str); } if (netdev != NULL) { bsetprop(DDI_PROP_TYPE_BYTE, "bootp-response", sizeof ("bootp-response"), (void *)(uintptr_t)netdev->mb_dhcpack, netdev->mb_size - sizeof (multiboot_tag_network_t)); } } bsetprop32("stdout", stdout_val); #endif /* __xpv */ /* * more conjured up values for made up things.... */ #if defined(__xpv) bsetprops("mfg-name", "i86xpv"); bsetprops("impl-arch-name", "i86xpv"); #else bsetprops("mfg-name", "i86pc"); bsetprops("impl-arch-name", "i86pc"); #endif /* * Build firmware-provided system properties */ build_firmware_properties(xbp); /* * XXPV * * Find out what these are: * - cpuid_feature_ecx_include * - cpuid_feature_ecx_exclude * - cpuid_feature_edx_include * - cpuid_feature_edx_exclude * * Find out what these are in multiboot: * - netdev-path * - fstype */ } #ifdef __xpv /* * Under the Hypervisor, memory usable for DMA may be scarce. One * very likely large pool of DMA friendly memory is occupied by * the boot_archive, as it was loaded by grub into low MFNs. * * Here we free up that memory by copying the boot archive to what are * likely higher MFN pages and then swapping the mfn/pfn mappings. */ #define PFN_2GIG 0x80000 static void relocate_boot_archive(struct xboot_info *xbp) { mfn_t max_mfn = HYPERVISOR_memory_op(XENMEM_maximum_ram_page, NULL); struct boot_modules *bm = xbp->bi_modules; uintptr_t va; pfn_t va_pfn; mfn_t va_mfn; caddr_t copy; pfn_t copy_pfn; mfn_t copy_mfn; size_t len; int slop; int total = 0; int relocated = 0; int mmu_update_return; mmu_update_t t[2]; x86pte_t pte; /* * If all MFN's are below 2Gig, don't bother doing this. */ if (max_mfn < PFN_2GIG) return; if (xbp->bi_module_cnt < 1) { DBG_MSG("no boot_archive!"); return; } DBG_MSG("moving boot_archive to high MFN memory\n"); va = (uintptr_t)bm->bm_addr; len = bm->bm_size; slop = va & MMU_PAGEOFFSET; if (slop) { va += MMU_PAGESIZE - slop; len -= MMU_PAGESIZE - slop; } len = P2ALIGN(len, MMU_PAGESIZE); /* * Go through all boot_archive pages, swapping any low MFN pages * with memory at next_phys. */ while (len != 0) { ++total; va_pfn = mmu_btop(va - ONE_GIG); va_mfn = mfn_list[va_pfn]; if (mfn_list[va_pfn] < PFN_2GIG) { copy = kbm_remap_window(next_phys, 1); bcopy((void *)va, copy, MMU_PAGESIZE); copy_pfn = mmu_btop(next_phys); copy_mfn = mfn_list[copy_pfn]; pte = mfn_to_ma(copy_mfn) | PT_NOCONSIST | PT_VALID; if (HYPERVISOR_update_va_mapping(va, pte, UVMF_INVLPG | UVMF_LOCAL)) bop_panic("relocate_boot_archive(): " "HYPERVISOR_update_va_mapping() failed"); mfn_list[va_pfn] = copy_mfn; mfn_list[copy_pfn] = va_mfn; t[0].ptr = mfn_to_ma(copy_mfn) | MMU_MACHPHYS_UPDATE; t[0].val = va_pfn; t[1].ptr = mfn_to_ma(va_mfn) | MMU_MACHPHYS_UPDATE; t[1].val = copy_pfn; if (HYPERVISOR_mmu_update(t, 2, &mmu_update_return, DOMID_SELF) != 0 || mmu_update_return != 2) bop_panic("relocate_boot_archive(): " "HYPERVISOR_mmu_update() failed"); next_phys += MMU_PAGESIZE; ++relocated; } len -= MMU_PAGESIZE; va += MMU_PAGESIZE; } DBG_MSG("Relocated pages:\n"); DBG(relocated); DBG_MSG("Out of total pages:\n"); DBG(total); } #endif /* __xpv */ #if !defined(__xpv) /* * simple description of a stack frame (args are 32 bit only currently) */ typedef struct bop_frame { struct bop_frame *old_frame; pc_t retaddr; long arg[1]; } bop_frame_t; void bop_traceback(bop_frame_t *frame) { pc_t pc; int cnt; char *ksym; ulong_t off; bop_printf(NULL, "Stack traceback:\n"); for (cnt = 0; cnt < 30; ++cnt) { /* up to 30 frames */ pc = frame->retaddr; if (pc == 0) break; ksym = kobj_getsymname(pc, &off); if (ksym) bop_printf(NULL, " %s+%lx", ksym, off); else bop_printf(NULL, " 0x%lx", pc); frame = frame->old_frame; if (frame == 0) { bop_printf(NULL, "\n"); break; } bop_printf(NULL, "\n"); } } struct trapframe { ulong_t error_code; /* optional */ ulong_t inst_ptr; ulong_t code_seg; ulong_t flags_reg; ulong_t stk_ptr; ulong_t stk_seg; }; void bop_trap(ulong_t *tfp) { struct trapframe *tf = (struct trapframe *)tfp; bop_frame_t fakeframe; static int depth = 0; /* * Check for an infinite loop of traps. */ if (++depth > 2) bop_panic("Nested trap"); bop_printf(NULL, "Unexpected trap\n"); /* * adjust the tf for optional error_code by detecting the code selector */ if (tf->code_seg != B64CODE_SEL) tf = (struct trapframe *)(tfp - 1); else bop_printf(NULL, "error code 0x%lx\n", tf->error_code & 0xffffffff); bop_printf(NULL, "instruction pointer 0x%lx\n", tf->inst_ptr); bop_printf(NULL, "code segment 0x%lx\n", tf->code_seg & 0xffff); bop_printf(NULL, "flags register 0x%lx\n", tf->flags_reg); bop_printf(NULL, "return %%rsp 0x%lx\n", tf->stk_ptr); bop_printf(NULL, "return %%ss 0x%lx\n", tf->stk_seg & 0xffff); /* grab %[er]bp pushed by our code from the stack */ fakeframe.old_frame = (bop_frame_t *)*(tfp - 3); fakeframe.retaddr = (pc_t)tf->inst_ptr; bop_printf(NULL, "Attempting stack backtrace:\n"); bop_traceback(&fakeframe); bop_panic("unexpected trap in early boot"); } extern void bop_trap_handler(void); static gate_desc_t *bop_idt; static desctbr_t bop_idt_info; /* * Install a temporary IDT that lets us catch errors in the boot time code. * We shouldn't get any faults at all while this is installed, so we'll * just generate a traceback and exit. */ static void bop_idt_init(void) { int t; bop_idt = (gate_desc_t *) do_bsys_alloc(NULL, NULL, MMU_PAGESIZE, MMU_PAGESIZE); bzero(bop_idt, MMU_PAGESIZE); for (t = 0; t < NIDT; ++t) { /* * Note that since boot runs without a TSS, the * double fault handler cannot use an alternate stack (64-bit). */ set_gatesegd(&bop_idt[t], &bop_trap_handler, B64CODE_SEL, SDT_SYSIGT, TRP_KPL, 0); } bop_idt_info.dtr_limit = (NIDT * sizeof (gate_desc_t)) - 1; bop_idt_info.dtr_base = (uintptr_t)bop_idt; wr_idtr(&bop_idt_info); } #endif /* !defined(__xpv) */ /* * This is where we enter the kernel. It dummies up the boot_ops and * boot_syscalls vectors and jumps off to _kobj_boot() */ void _start(struct xboot_info *xbp) { bootops_t *bops = &bootop; extern void _kobj_boot(); /* * 1st off - initialize the console for any error messages */ xbootp = xbp; #ifdef __xpv HYPERVISOR_shared_info = (void *)xbp->bi_shared_info; xen_info = xbp->bi_xen_start_info; #endif #ifndef __xpv if (*((uint32_t *)(FASTBOOT_SWTCH_PA + FASTBOOT_STACK_OFFSET)) == FASTBOOT_MAGIC) { post_fastreboot = 1; *((uint32_t *)(FASTBOOT_SWTCH_PA + FASTBOOT_STACK_OFFSET)) = 0; } #endif bcons_init(xbp); have_console = 1; /* * enable debugging */ if (find_boot_prop("kbm_debug") != NULL) kbm_debug = 1; DBG_MSG("\n\n*** Entered Solaris in _start() cmdline is: "); DBG_MSG((char *)xbp->bi_cmdline); DBG_MSG("\n\n\n"); /* * physavail is no longer used by startup */ bm.physinstalled = xbp->bi_phys_install; bm.pcimem = xbp->bi_pcimem; bm.rsvdmem = xbp->bi_rsvdmem; bm.physavail = NULL; /* * initialize the boot time allocator */ next_phys = xbp->bi_next_paddr; DBG(next_phys); next_virt = (uintptr_t)xbp->bi_next_vaddr; DBG(next_virt); DBG_MSG("Initializing boot time memory management..."); #ifdef __xpv { xen_platform_parameters_t p; /* This call shouldn't fail, dboot already did it once. */ (void) HYPERVISOR_xen_version(XENVER_platform_parameters, &p); mfn_to_pfn_mapping = (pfn_t *)(xen_virt_start = p.virt_start); DBG(xen_virt_start); } #endif kbm_init(xbp); DBG_MSG("done\n"); /* * Fill in the bootops vector */ bops->bsys_version = BO_VERSION; bops->boot_mem = &bm; bops->bsys_alloc = do_bsys_alloc; bops->bsys_free = do_bsys_free; bops->bsys_getproplen = do_bsys_getproplen; bops->bsys_getprop = do_bsys_getprop; bops->bsys_nextprop = do_bsys_nextprop; bops->bsys_printf = bop_printf; bops->bsys_doint = do_bsys_doint; /* * BOP_EALLOC() is no longer needed */ bops->bsys_ealloc = do_bsys_ealloc; #ifdef __xpv /* * On domain 0 we need to free up some physical memory that is * usable for DMA. Since GRUB loaded the boot_archive, it is * sitting in low MFN memory. We'll relocated the boot archive * pages to high PFN memory. */ if (DOMAIN_IS_INITDOMAIN(xen_info)) relocate_boot_archive(xbp); #endif #ifndef __xpv /* * Install an IDT to catch early pagefaults (shouldn't have any). * Also needed for kmdb. */ bop_idt_init(); #endif /* Set up the shadow fb for framebuffer console */ boot_fb_shadow_init(bops); /* * Start building the boot properties from the command line */ DBG_MSG("Initializing boot properties:\n"); build_boot_properties(xbp); if (find_boot_prop("prom_debug") || kbm_debug) { char *value; value = do_bsys_alloc(NULL, NULL, MMU_PAGESIZE, MMU_PAGESIZE); boot_prop_display(value); } /* * jump into krtld... */ _kobj_boot(&bop_sysp, NULL, bops, NULL); } /*ARGSUSED*/ static caddr_t no_more_alloc(bootops_t *bop, caddr_t virthint, size_t size, int align) { panic("Attempt to bsys_alloc() too late\n"); return (NULL); } /*ARGSUSED*/ static void no_more_free(bootops_t *bop, caddr_t virt, size_t size) { panic("Attempt to bsys_free() too late\n"); } void bop_no_more_mem(void) { DBG(total_bop_alloc_scratch); DBG(total_bop_alloc_kernel); bootops->bsys_alloc = no_more_alloc; bootops->bsys_free = no_more_free; } /* * Set ACPI firmware properties */ static caddr_t vmap_phys(size_t length, paddr_t pa) { paddr_t start, end; caddr_t va; size_t len, page; #ifdef __xpv pa = pfn_to_pa(xen_assign_pfn(mmu_btop(pa))) | (pa & MMU_PAGEOFFSET); #endif start = P2ALIGN(pa, MMU_PAGESIZE); end = P2ROUNDUP(pa + length, MMU_PAGESIZE); len = end - start; va = (caddr_t)alloc_vaddr(len, MMU_PAGESIZE); for (page = 0; page < len; page += MMU_PAGESIZE) kbm_map((uintptr_t)va + page, start + page, 0, 0); return (va + (pa & MMU_PAGEOFFSET)); } static uint8_t checksum_table(uint8_t *tp, size_t len) { uint8_t sum = 0; while (len-- > 0) sum += *tp++; return (sum); } static int valid_rsdp(ACPI_TABLE_RSDP *rp) { /* validate the V1.x checksum */ if (checksum_table((uint8_t *)rp, ACPI_RSDP_CHECKSUM_LENGTH) != 0) return (0); /* If pre-ACPI 2.0, this is a valid RSDP */ if (rp->Revision < 2) return (1); /* validate the V2.x checksum */ if (checksum_table((uint8_t *)rp, ACPI_RSDP_XCHECKSUM_LENGTH) != 0) return (0); return (1); } /* * Scan memory range for an RSDP; * see ACPI 3.0 Spec, 5.2.5.1 */ static ACPI_TABLE_RSDP * scan_rsdp(paddr_t start, paddr_t end) { ssize_t len = end - start; caddr_t ptr; ptr = vmap_phys(len, start); while (len > 0) { if (strncmp(ptr, ACPI_SIG_RSDP, strlen(ACPI_SIG_RSDP)) == 0 && valid_rsdp((ACPI_TABLE_RSDP *)ptr)) return ((ACPI_TABLE_RSDP *)ptr); ptr += ACPI_RSDP_SCAN_STEP; len -= ACPI_RSDP_SCAN_STEP; } return (NULL); } /* * Refer to ACPI 3.0 Spec, section 5.2.5.1 to understand this function */ static ACPI_TABLE_RSDP * find_rsdp() { ACPI_TABLE_RSDP *rsdp; uint64_t rsdp_val = 0; uint16_t *ebda_seg; paddr_t ebda_addr; /* check for "acpi-root-tab" property */ if (do_bsys_getproplen(NULL, "acpi-root-tab") == sizeof (uint64_t)) { (void) do_bsys_getprop(NULL, "acpi-root-tab", &rsdp_val); if (rsdp_val != 0) { rsdp = scan_rsdp(rsdp_val, rsdp_val + sizeof (*rsdp)); if (rsdp != NULL) { if (kbm_debug) { bop_printf(NULL, "Using RSDP from bootloader: " "0x%p\n", (void *)rsdp); } return (rsdp); } } } /* * Get the EBDA segment and scan the first 1K */ ebda_seg = (uint16_t *)vmap_phys(sizeof (uint16_t), ACPI_EBDA_PTR_LOCATION); ebda_addr = *ebda_seg << 4; rsdp = scan_rsdp(ebda_addr, ebda_addr + ACPI_EBDA_WINDOW_SIZE); if (rsdp == NULL) /* if EBDA doesn't contain RSDP, look in BIOS memory */ rsdp = scan_rsdp(ACPI_HI_RSDP_WINDOW_BASE, ACPI_HI_RSDP_WINDOW_BASE + ACPI_HI_RSDP_WINDOW_SIZE); return (rsdp); } static ACPI_TABLE_HEADER * map_fw_table(paddr_t table_addr) { ACPI_TABLE_HEADER *tp; size_t len = MAX(sizeof (*tp), MMU_PAGESIZE); /* * Map at least a page; if the table is larger than this, remap it */ tp = (ACPI_TABLE_HEADER *)vmap_phys(len, table_addr); if (tp->Length > len) tp = (ACPI_TABLE_HEADER *)vmap_phys(tp->Length, table_addr); return (tp); } static ACPI_TABLE_HEADER * find_fw_table(char *signature) { static int revision = 0; static ACPI_TABLE_XSDT *xsdt; static int len; paddr_t xsdt_addr; ACPI_TABLE_RSDP *rsdp; ACPI_TABLE_HEADER *tp; paddr_t table_addr; int n; if (strlen(signature) != ACPI_NAME_SIZE) return (NULL); /* * Reading the ACPI 3.0 Spec, section 5.2.5.3 will help * understand this code. If we haven't already found the RSDT/XSDT, * revision will be 0. Find the RSDP and check the revision * to find out whether to use the RSDT or XSDT. If revision is * 0 or 1, use the RSDT and set internal revision to 1; if it is 2, * use the XSDT. If the XSDT address is 0, though, fall back to * revision 1 and use the RSDT. */ if (revision == 0) { if ((rsdp = find_rsdp()) != NULL) { revision = rsdp->Revision; /* * ACPI 6.0 states that current revision is 2 * from acpi_table_rsdp definition: * Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */ if (revision > 2) revision = 2; switch (revision) { case 2: /* * Use the XSDT unless BIOS is buggy and * claims to be rev 2 but has a null XSDT * address */ xsdt_addr = rsdp->XsdtPhysicalAddress; if (xsdt_addr != 0) break; /* FALLTHROUGH */ case 0: /* treat RSDP rev 0 as revision 1 internally */ revision = 1; /* FALLTHROUGH */ case 1: /* use the RSDT for rev 0/1 */ xsdt_addr = rsdp->RsdtPhysicalAddress; break; default: /* unknown revision */ revision = 0; break; } } if (revision == 0) return (NULL); /* cache the XSDT info */ xsdt = (ACPI_TABLE_XSDT *)map_fw_table(xsdt_addr); len = (xsdt->Header.Length - sizeof (xsdt->Header)) / ((revision == 1) ? sizeof (uint32_t) : sizeof (uint64_t)); } /* * Scan the table headers looking for a signature match */ for (n = 0; n < len; n++) { ACPI_TABLE_RSDT *rsdt = (ACPI_TABLE_RSDT *)xsdt; table_addr = (revision == 1) ? rsdt->TableOffsetEntry[n] : xsdt->TableOffsetEntry[n]; if (table_addr == 0) continue; tp = map_fw_table(table_addr); if (strncmp(tp->Signature, signature, ACPI_NAME_SIZE) == 0) { return (tp); } } return (NULL); } static void process_mcfg(ACPI_TABLE_MCFG *tp) { ACPI_MCFG_ALLOCATION *cfg_baap; char *cfg_baa_endp; int64_t ecfginfo[4]; cfg_baap = (ACPI_MCFG_ALLOCATION *)((uintptr_t)tp + sizeof (*tp)); cfg_baa_endp = ((char *)tp) + tp->Header.Length; while ((char *)cfg_baap < cfg_baa_endp) { if (cfg_baap->Address != 0 && cfg_baap->PciSegment == 0) { ecfginfo[0] = cfg_baap->Address; ecfginfo[1] = cfg_baap->PciSegment; ecfginfo[2] = cfg_baap->StartBusNumber; ecfginfo[3] = cfg_baap->EndBusNumber; bsetprop(DDI_PROP_TYPE_INT64, MCFG_PROPNAME, strlen(MCFG_PROPNAME), ecfginfo, sizeof (ecfginfo)); break; } cfg_baap++; } } #ifndef __xpv static void process_madt_entries(ACPI_TABLE_MADT *tp, uint32_t *cpu_countp, uint32_t *cpu_possible_countp, uint32_t *cpu_apicid_array) { ACPI_SUBTABLE_HEADER *item, *end; uint32_t cpu_count = 0; uint32_t cpu_possible_count = 0; /* * Determine number of CPUs and keep track of "final" APIC ID * for each CPU by walking through ACPI MADT processor list */ end = (ACPI_SUBTABLE_HEADER *)(tp->Header.Length + (uintptr_t)tp); item = (ACPI_SUBTABLE_HEADER *)((uintptr_t)tp + sizeof (*tp)); while (item < end) { switch (item->Type) { case ACPI_MADT_TYPE_LOCAL_APIC: { ACPI_MADT_LOCAL_APIC *cpu = (ACPI_MADT_LOCAL_APIC *) item; if (cpu->LapicFlags & ACPI_MADT_ENABLED) { if (cpu_apicid_array != NULL) cpu_apicid_array[cpu_count] = cpu->Id; cpu_count++; } cpu_possible_count++; break; } case ACPI_MADT_TYPE_LOCAL_X2APIC: { ACPI_MADT_LOCAL_X2APIC *cpu = (ACPI_MADT_LOCAL_X2APIC *) item; if (cpu->LapicFlags & ACPI_MADT_ENABLED) { if (cpu_apicid_array != NULL) cpu_apicid_array[cpu_count] = cpu->LocalApicId; cpu_count++; } cpu_possible_count++; break; } default: if (kbm_debug) bop_printf(NULL, "MADT type %d\n", item->Type); break; } item = (ACPI_SUBTABLE_HEADER *)((uintptr_t)item + item->Length); } if (cpu_countp) *cpu_countp = cpu_count; if (cpu_possible_countp) *cpu_possible_countp = cpu_possible_count; } static void process_madt(ACPI_TABLE_MADT *tp) { uint32_t cpu_count = 0; uint32_t cpu_possible_count = 0; uint32_t *cpu_apicid_array; /* x2APIC ID is 32bit! */ if (tp != NULL) { /* count cpu's */ process_madt_entries(tp, &cpu_count, &cpu_possible_count, NULL); cpu_apicid_array = (uint32_t *)do_bsys_alloc(NULL, NULL, cpu_count * sizeof (*cpu_apicid_array), MMU_PAGESIZE); if (cpu_apicid_array == NULL) bop_panic("Not enough memory for APIC ID array"); /* copy IDs */ process_madt_entries(tp, NULL, NULL, cpu_apicid_array); /* * Make boot property for array of "final" APIC IDs for each * CPU */ bsetprop(DDI_PROP_TYPE_INT, BP_CPU_APICID_ARRAY, strlen(BP_CPU_APICID_ARRAY), cpu_apicid_array, cpu_count * sizeof (*cpu_apicid_array)); } /* * Check whether property plat-max-ncpus is already set. */ if (do_bsys_getproplen(NULL, PLAT_MAX_NCPUS_NAME) < 0) { /* * Set plat-max-ncpus to number of maximum possible CPUs given * in MADT if it hasn't been set. * There's no formal way to detect max possible CPUs supported * by platform according to ACPI spec3.0b. So current CPU * hotplug implementation expects that all possible CPUs will * have an entry in MADT table and set plat-max-ncpus to number * of entries in MADT. * With introducing of ACPI4.0, Maximum System Capability Table * (MSCT) provides maximum number of CPUs supported by platform. * If MSCT is unavailable, fall back to old way. */ if (tp != NULL) bsetpropsi(PLAT_MAX_NCPUS_NAME, cpu_possible_count); } /* * Set boot property boot-max-ncpus to number of CPUs existing at * boot time. boot-max-ncpus is mainly used for optimization. */ if (tp != NULL) bsetpropsi(BOOT_MAX_NCPUS_NAME, cpu_count); /* * User-set boot-ncpus overrides firmware count */ if (do_bsys_getproplen(NULL, BOOT_NCPUS_NAME) >= 0) return; /* * Set boot property boot-ncpus to number of active CPUs given in MADT * if it hasn't been set yet. */ if (tp != NULL) bsetpropsi(BOOT_NCPUS_NAME, cpu_count); } static void process_srat(ACPI_TABLE_SRAT *tp) { ACPI_SUBTABLE_HEADER *item, *end; int i; int proc_num, mem_num; #pragma pack(1) struct { uint32_t domain; uint32_t apic_id; uint32_t sapic_id; } processor; struct { uint32_t domain; uint32_t x2apic_id; } x2apic; struct { uint32_t domain; uint64_t addr; uint64_t length; uint32_t flags; } memory; #pragma pack() char prop_name[30]; uint64_t maxmem = 0; if (tp == NULL) return; proc_num = mem_num = 0; end = (ACPI_SUBTABLE_HEADER *)(tp->Header.Length + (uintptr_t)tp); item = (ACPI_SUBTABLE_HEADER *)((uintptr_t)tp + sizeof (*tp)); while (item < end) { switch (item->Type) { case ACPI_SRAT_TYPE_CPU_AFFINITY: { ACPI_SRAT_CPU_AFFINITY *cpu = (ACPI_SRAT_CPU_AFFINITY *) item; if (!(cpu->Flags & ACPI_SRAT_CPU_ENABLED)) break; processor.domain = cpu->ProximityDomainLo; for (i = 0; i < 3; i++) processor.domain += cpu->ProximityDomainHi[i] << ((i + 1) * 8); processor.apic_id = cpu->ApicId; processor.sapic_id = cpu->LocalSapicEid; (void) snprintf(prop_name, 30, "acpi-srat-processor-%d", proc_num); bsetprop(DDI_PROP_TYPE_INT, prop_name, strlen(prop_name), &processor, sizeof (processor)); proc_num++; break; } case ACPI_SRAT_TYPE_MEMORY_AFFINITY: { ACPI_SRAT_MEM_AFFINITY *mem = (ACPI_SRAT_MEM_AFFINITY *)item; if (!(mem->Flags & ACPI_SRAT_MEM_ENABLED)) break; memory.domain = mem->ProximityDomain; memory.addr = mem->BaseAddress; memory.length = mem->Length; memory.flags = mem->Flags; (void) snprintf(prop_name, 30, "acpi-srat-memory-%d", mem_num); bsetprop(DDI_PROP_TYPE_INT, prop_name, strlen(prop_name), &memory, sizeof (memory)); if ((mem->Flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && (memory.addr + memory.length > maxmem)) { maxmem = memory.addr + memory.length; } mem_num++; break; } case ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY: { ACPI_SRAT_X2APIC_CPU_AFFINITY *x2cpu = (ACPI_SRAT_X2APIC_CPU_AFFINITY *) item; if (!(x2cpu->Flags & ACPI_SRAT_CPU_ENABLED)) break; x2apic.domain = x2cpu->ProximityDomain; x2apic.x2apic_id = x2cpu->ApicId; (void) snprintf(prop_name, 30, "acpi-srat-processor-%d", proc_num); bsetprop(DDI_PROP_TYPE_INT, prop_name, strlen(prop_name), &x2apic, sizeof (x2apic)); proc_num++; break; } default: if (kbm_debug) bop_printf(NULL, "SRAT type %d\n", item->Type); break; } item = (ACPI_SUBTABLE_HEADER *) (item->Length + (uintptr_t)item); } /* * The maximum physical address calculated from the SRAT table is more * accurate than that calculated from the MSCT table. */ if (maxmem != 0) { plat_dr_physmax = btop(maxmem); } } static void process_slit(ACPI_TABLE_SLIT *tp) { /* * Check the number of localities; if it's too huge, we just * return and locality enumeration code will handle this later, * if possible. * * Note that the size of the table is the square of the * number of localities; if the number of localities exceeds * UINT16_MAX, the table size may overflow an int when being * passed to bsetprop() below. */ if (tp->LocalityCount >= SLIT_LOCALITIES_MAX) return; bsetprop64(SLIT_NUM_PROPNAME, tp->LocalityCount); bsetprop(DDI_PROP_TYPE_BYTE, SLIT_PROPNAME, strlen(SLIT_PROPNAME), &tp->Entry, tp->LocalityCount * tp->LocalityCount); } static ACPI_TABLE_MSCT * process_msct(ACPI_TABLE_MSCT *tp) { int last_seen = 0; int proc_num = 0; ACPI_MSCT_PROXIMITY *item, *end; extern uint64_t plat_dr_options; ASSERT(tp != NULL); end = (ACPI_MSCT_PROXIMITY *)(tp->Header.Length + (uintptr_t)tp); for (item = (void *)((uintptr_t)tp + tp->ProximityOffset); item < end; item = (void *)(item->Length + (uintptr_t)item)) { /* * Sanity check according to section 5.2.19.1 of ACPI 4.0. * Revision 1 * Length 22 */ if (item->Revision != 1 || item->Length != 22) { cmn_err(CE_CONT, "?boot: unknown proximity domain structure in MSCT " "with Revision(%d), Length(%d).\n", (int)item->Revision, (int)item->Length); return (NULL); } else if (item->RangeStart > item->RangeEnd) { cmn_err(CE_CONT, "?boot: invalid proximity domain structure in MSCT " "with RangeStart(%u), RangeEnd(%u).\n", item->RangeStart, item->RangeEnd); return (NULL); } else if (item->RangeStart != last_seen) { /* * Items must be organized in ascending order of the * proximity domain enumerations. */ cmn_err(CE_CONT, "?boot: invalid proximity domain structure in MSCT," " items are not orginized in ascending order.\n"); return (NULL); } /* * If ProcessorCapacity is 0 then there would be no CPUs in this * domain. */ if (item->ProcessorCapacity != 0) { proc_num += (item->RangeEnd - item->RangeStart + 1) * item->ProcessorCapacity; } last_seen = item->RangeEnd - item->RangeStart + 1; /* * Break out if all proximity domains have been processed. * Some BIOSes may have unused items at the end of MSCT table. */ if (last_seen > tp->MaxProximityDomains) { break; } } if (last_seen != tp->MaxProximityDomains + 1) { cmn_err(CE_CONT, "?boot: invalid proximity domain structure in MSCT, " "proximity domain count doesn't match.\n"); return (NULL); } /* * Set plat-max-ncpus property if it hasn't been set yet. */ if (do_bsys_getproplen(NULL, PLAT_MAX_NCPUS_NAME) < 0) { if (proc_num != 0) { bsetpropsi(PLAT_MAX_NCPUS_NAME, proc_num); } } /* * Use Maximum Physical Address from the MSCT table as upper limit for * memory hot-adding by default. It may be overridden by value from * the SRAT table or the "plat-dr-physmax" boot option. */ plat_dr_physmax = btop(tp->MaxAddress + 1); /* * Existence of MSCT implies CPU/memory hotplug-capability for the * platform. */ plat_dr_options |= PLAT_DR_FEATURE_CPU; plat_dr_options |= PLAT_DR_FEATURE_MEMORY; return (tp); } #else /* __xpv */ static void enumerate_xen_cpus() { processorid_t id, max_id; /* * User-set boot-ncpus overrides enumeration */ if (do_bsys_getproplen(NULL, BOOT_NCPUS_NAME) >= 0) return; /* * Probe every possible virtual CPU id and remember the * highest id present; the count of CPUs is one greater * than this. This tacitly assumes at least cpu 0 is present. */ max_id = 0; for (id = 0; id < MAX_VIRT_CPUS; id++) if (HYPERVISOR_vcpu_op(VCPUOP_is_up, id, NULL) == 0) max_id = id; bsetpropsi(BOOT_NCPUS_NAME, max_id+1); } #endif /* __xpv */ /*ARGSUSED*/ static void build_firmware_properties(struct xboot_info *xbp) { ACPI_TABLE_HEADER *tp = NULL; #ifndef __xpv if (xbp->bi_uefi_arch == XBI_UEFI_ARCH_64) { bsetprops("efi-systype", "64"); bsetprop64("efi-systab", (uint64_t)(uintptr_t)xbp->bi_uefi_systab); if (kbm_debug) bop_printf(NULL, "64-bit UEFI detected.\n"); } else if (xbp->bi_uefi_arch == XBI_UEFI_ARCH_32) { bsetprops("efi-systype", "32"); bsetprop64("efi-systab", (uint64_t)(uintptr_t)xbp->bi_uefi_systab); if (kbm_debug) bop_printf(NULL, "32-bit UEFI detected.\n"); } if (xbp->bi_acpi_rsdp != NULL) { bsetprop64("acpi-root-tab", (uint64_t)(uintptr_t)xbp->bi_acpi_rsdp); } if (xbp->bi_smbios != NULL) { bsetprop64("smbios-address", (uint64_t)(uintptr_t)xbp->bi_smbios); } if ((tp = find_fw_table(ACPI_SIG_MSCT)) != NULL) msct_ptr = process_msct((ACPI_TABLE_MSCT *)tp); else msct_ptr = NULL; if ((tp = find_fw_table(ACPI_SIG_MADT)) != NULL) process_madt((ACPI_TABLE_MADT *)tp); if ((srat_ptr = (ACPI_TABLE_SRAT *) find_fw_table(ACPI_SIG_SRAT)) != NULL) process_srat(srat_ptr); if (slit_ptr = (ACPI_TABLE_SLIT *)find_fw_table(ACPI_SIG_SLIT)) process_slit(slit_ptr); tp = find_fw_table(ACPI_SIG_MCFG); #else /* __xpv */ enumerate_xen_cpus(); if (DOMAIN_IS_INITDOMAIN(xen_info)) tp = find_fw_table(ACPI_SIG_MCFG); #endif /* __xpv */ if (tp != NULL) process_mcfg((ACPI_TABLE_MCFG *)tp); } /* * fake up a boot property for deferred early console output * this is used by both graphical boot and the (developer only) * USB serial console */ void * defcons_init(size_t size) { static char *p = NULL; p = do_bsys_alloc(NULL, NULL, size, MMU_PAGESIZE); *p = 0; bsetprop32("deferred-console-buf", (uint32_t)((uintptr_t)&p)); return (p); } /*ARGSUSED*/ int boot_compinfo(int fd, struct compinfo *cbp) { cbp->iscmp = 0; cbp->blksize = MAXBSIZE; return (0); } #define BP_MAX_STRLEN 32 /* * Get value for given boot property */ int bootprop_getval(const char *prop_name, u_longlong_t *prop_value) { int boot_prop_len; char str[BP_MAX_STRLEN]; u_longlong_t value; boot_prop_len = BOP_GETPROPLEN(bootops, prop_name); if (boot_prop_len < 0 || boot_prop_len > sizeof (str) || BOP_GETPROP(bootops, prop_name, str) < 0 || kobj_getvalue(str, &value) == -1) return (-1); if (prop_value) *prop_value = value; return (0); }