/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 1992, 2010, Oracle and/or its affiliates. All rights reserved. */ /* * PC specific DDI implementation */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if defined(__xpv) #include #endif #include #include #include /* * DDI Boot Configuration */ /* * Platform drivers on this platform */ char *platform_module_list[] = { "acpippm", "ppm", (char *)0 }; /* pci bus resource maps */ struct pci_bus_resource *pci_bus_res; size_t dma_max_copybuf_size = 0x101000; /* 1M + 4K */ uint64_t ramdisk_start, ramdisk_end; int pseudo_isa = 0; /* * Forward declarations */ static int getlongprop_buf(); static void get_boot_properties(void); static void impl_bus_initialprobe(void); static void impl_bus_reprobe(void); static int poke_mem(peekpoke_ctlops_t *in_args); static int peek_mem(peekpoke_ctlops_t *in_args); static int kmem_override_cache_attrs(caddr_t, size_t, uint_t); #if defined(__amd64) && !defined(__xpv) extern void immu_init(void); #endif #define CTGENTRIES 15 static struct ctgas { struct ctgas *ctg_next; int ctg_index; void *ctg_addr[CTGENTRIES]; size_t ctg_size[CTGENTRIES]; } ctglist; static kmutex_t ctgmutex; #define CTGLOCK() mutex_enter(&ctgmutex) #define CTGUNLOCK() mutex_exit(&ctgmutex) /* * Minimum pfn value of page_t's put on the free list. This is to simplify * support of ddi dma memory requests which specify small, non-zero addr_lo * values. * * The default value of 2, which corresponds to the only known non-zero addr_lo * value used, means a single page will be sacrificed (pfn typically starts * at 1). ddiphysmin can be set to 0 to disable. It cannot be set above 0x100 * otherwise mp startup panics. */ pfn_t ddiphysmin = 2; static void check_driver_disable(void) { int proplen = 128; char *prop_name; char *drv_name, *propval; major_t major; prop_name = kmem_alloc(proplen, KM_SLEEP); for (major = 0; major < devcnt; major++) { drv_name = ddi_major_to_name(major); if (drv_name == NULL) continue; (void) snprintf(prop_name, proplen, "disable-%s", drv_name); if (ddi_prop_lookup_string(DDI_DEV_T_ANY, ddi_root_node(), DDI_PROP_DONTPASS, prop_name, &propval) == DDI_SUCCESS) { if (strcmp(propval, "true") == 0) { devnamesp[major].dn_flags |= DN_DRIVER_REMOVED; cmn_err(CE_NOTE, "driver %s disabled", drv_name); } ddi_prop_free(propval); } } kmem_free(prop_name, proplen); } /* * Configure the hardware on the system. * Called before the rootfs is mounted */ void configure(void) { extern void i_ddi_init_root(); #if defined(__i386) extern int fpu_pentium_fdivbug; #endif /* __i386 */ extern int fpu_ignored; /* * Determine if an FPU is attached */ fpu_probe(); #if defined(__i386) if (fpu_pentium_fdivbug) { printf("\ FP hardware exhibits Pentium floating point divide problem\n"); } #endif /* __i386 */ if (fpu_ignored) { printf("FP hardware will not be used\n"); } else if (!fpu_exists) { printf("No FPU in configuration\n"); } /* * Initialize devices on the machine. * Uses configuration tree built by the PROMs to determine what * is present, and builds a tree of prototype dev_info nodes * corresponding to the hardware which identified itself. */ /* * Initialize root node. */ i_ddi_init_root(); /* reprogram devices not set up by firmware (BIOS) */ impl_bus_reprobe(); #if defined(__amd64) && !defined(__xpv) /* * Setup but don't startup the IOMMU * Startup happens later via a direct call * to IOMMU code by boot code. * At this point, all PCI bus renumbering * is done, so safe to init the IMMU * AKA Intel IOMMU. */ immu_init(); #endif /* * attach the isa nexus to get ACPI resource usage * isa is "kind of" a pseudo node */ #if defined(__xpv) if (DOMAIN_IS_INITDOMAIN(xen_info)) { if (pseudo_isa) (void) i_ddi_attach_pseudo_node("isa"); else (void) i_ddi_attach_hw_nodes("isa"); } #else if (pseudo_isa) (void) i_ddi_attach_pseudo_node("isa"); else (void) i_ddi_attach_hw_nodes("isa"); #endif } /* * The "status" property indicates the operational status of a device. * If this property is present, the value is a string indicating the * status of the device as follows: * * "okay" operational. * "disabled" not operational, but might become operational. * "fail" not operational because a fault has been detected, * and it is unlikely that the device will become * operational without repair. no additional details * are available. * "fail-xxx" not operational because a fault has been detected, * and it is unlikely that the device will become * operational without repair. "xxx" is additional * human-readable information about the particular * fault condition that was detected. * * The absence of this property means that the operational status is * unknown or okay. * * This routine checks the status property of the specified device node * and returns 0 if the operational status indicates failure, and 1 otherwise. * * The property may exist on plug-in cards the existed before IEEE 1275-1994. * And, in that case, the property may not even be a string. So we carefully * check for the value "fail", in the beginning of the string, noting * the property length. */ int status_okay(int id, char *buf, int buflen) { char status_buf[OBP_MAXPROPNAME]; char *bufp = buf; int len = buflen; int proplen; static const char *status = "status"; static const char *fail = "fail"; int fail_len = (int)strlen(fail); /* * Get the proplen ... if it's smaller than "fail", * or doesn't exist ... then we don't care, since * the value can't begin with the char string "fail". * * NB: proplen, if it's a string, includes the NULL in the * the size of the property, and fail_len does not. */ proplen = prom_getproplen((pnode_t)id, (caddr_t)status); if (proplen <= fail_len) /* nonexistant or uninteresting len */ return (1); /* * if a buffer was provided, use it */ if ((buf == (char *)NULL) || (buflen <= 0)) { bufp = status_buf; len = sizeof (status_buf); } *bufp = (char)0; /* * Get the property into the buffer, to the extent of the buffer, * and in case the buffer is smaller than the property size, * NULL terminate the buffer. (This handles the case where * a buffer was passed in and the caller wants to print the * value, but the buffer was too small). */ (void) prom_bounded_getprop((pnode_t)id, (caddr_t)status, (caddr_t)bufp, len); *(bufp + len - 1) = (char)0; /* * If the value begins with the char string "fail", * then it means the node is failed. We don't care * about any other values. We assume the node is ok * although it might be 'disabled'. */ if (strncmp(bufp, fail, fail_len) == 0) return (0); return (1); } /* * Check the status of the device node passed as an argument. * * if ((status is OKAY) || (status is DISABLED)) * return DDI_SUCCESS * else * print a warning and return DDI_FAILURE */ /*ARGSUSED1*/ int check_status(int id, char *name, dev_info_t *parent) { char status_buf[64]; char devtype_buf[OBP_MAXPROPNAME]; int retval = DDI_FAILURE; /* * is the status okay? */ if (status_okay(id, status_buf, sizeof (status_buf))) return (DDI_SUCCESS); /* * a status property indicating bad memory will be associated * with a node which has a "device_type" property with a value of * "memory-controller". in this situation, return DDI_SUCCESS */ if (getlongprop_buf(id, OBP_DEVICETYPE, devtype_buf, sizeof (devtype_buf)) > 0) { if (strcmp(devtype_buf, "memory-controller") == 0) retval = DDI_SUCCESS; } /* * print the status property information */ cmn_err(CE_WARN, "status '%s' for '%s'", status_buf, name); return (retval); } /*ARGSUSED*/ uint_t softlevel1(caddr_t arg1, caddr_t arg2) { softint(); return (1); } /* * Allow for implementation specific correction of PROM property values. */ /*ARGSUSED*/ void impl_fix_props(dev_info_t *dip, dev_info_t *ch_dip, char *name, int len, caddr_t buffer) { /* * There are no adjustments needed in this implementation. */ } static int getlongprop_buf(int id, char *name, char *buf, int maxlen) { int size; size = prom_getproplen((pnode_t)id, name); if (size <= 0 || (size > maxlen - 1)) return (-1); if (-1 == prom_getprop((pnode_t)id, name, buf)) return (-1); if (strcmp("name", name) == 0) { if (buf[size - 1] != '\0') { buf[size] = '\0'; size += 1; } } return (size); } static int get_prop_int_array(dev_info_t *di, char *pname, int **pval, uint_t *plen) { int ret; if ((ret = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, di, DDI_PROP_DONTPASS, pname, pval, plen)) == DDI_PROP_SUCCESS) { *plen = (*plen) * (sizeof (int)); } return (ret); } /* * Node Configuration */ struct prop_ispec { uint_t pri, vec; }; /* * For the x86, we're prepared to claim that the interrupt string * is in the form of a list of specifications. */ #define VEC_MIN 1 #define VEC_MAX 255 static int impl_xlate_intrs(dev_info_t *child, int *in, struct ddi_parent_private_data *pdptr) { size_t size; int n; struct intrspec *new; caddr_t got_prop; int *inpri; int got_len; extern int ignore_hardware_nodes; /* force flag from ddi_impl.c */ static char bad_intr_fmt[] = "bad interrupt spec from %s%d - ipl %d, irq %d\n"; /* * determine if the driver is expecting the new style "interrupts" * property which just contains the IRQ, or the old style which * contains pairs of . if it is the new style, we always * assign IPL 5 unless an "interrupt-priorities" property exists. * in that case, the "interrupt-priorities" property contains the * IPL values that match, one for one, the IRQ values in the * "interrupts" property. */ inpri = NULL; if ((ddi_getprop(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS, "ignore-hardware-nodes", -1) != -1) || ignore_hardware_nodes) { /* the old style "interrupts" property... */ /* * The list consists of elements */ if ((n = (*in++ >> 1)) < 1) return (DDI_FAILURE); pdptr->par_nintr = n; size = n * sizeof (struct intrspec); new = pdptr->par_intr = kmem_zalloc(size, KM_SLEEP); while (n--) { int level = *in++; int vec = *in++; if (level < 1 || level > MAXIPL || vec < VEC_MIN || vec > VEC_MAX) { cmn_err(CE_CONT, bad_intr_fmt, DEVI(child)->devi_name, DEVI(child)->devi_instance, level, vec); goto broken; } new->intrspec_pri = level; if (vec != 2) new->intrspec_vec = vec; else /* * irq 2 on the PC bus is tied to irq 9 * on ISA, EISA and MicroChannel */ new->intrspec_vec = 9; new++; } return (DDI_SUCCESS); } else { /* the new style "interrupts" property... */ /* * The list consists of elements */ if ((n = (*in++)) < 1) return (DDI_FAILURE); pdptr->par_nintr = n; size = n * sizeof (struct intrspec); new = pdptr->par_intr = kmem_zalloc(size, KM_SLEEP); /* XXX check for "interrupt-priorities" property... */ if (ddi_getlongprop(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS, "interrupt-priorities", (caddr_t)&got_prop, &got_len) == DDI_PROP_SUCCESS) { if (n != (got_len / sizeof (int))) { cmn_err(CE_CONT, "bad interrupt-priorities length" " from %s%d: expected %d, got %d\n", DEVI(child)->devi_name, DEVI(child)->devi_instance, n, (int)(got_len / sizeof (int))); goto broken; } inpri = (int *)got_prop; } while (n--) { int level; int vec = *in++; if (inpri == NULL) level = 5; else level = *inpri++; if (level < 1 || level > MAXIPL || vec < VEC_MIN || vec > VEC_MAX) { cmn_err(CE_CONT, bad_intr_fmt, DEVI(child)->devi_name, DEVI(child)->devi_instance, level, vec); goto broken; } new->intrspec_pri = level; if (vec != 2) new->intrspec_vec = vec; else /* * irq 2 on the PC bus is tied to irq 9 * on ISA, EISA and MicroChannel */ new->intrspec_vec = 9; new++; } if (inpri != NULL) kmem_free(got_prop, got_len); return (DDI_SUCCESS); } broken: kmem_free(pdptr->par_intr, size); pdptr->par_intr = NULL; pdptr->par_nintr = 0; if (inpri != NULL) kmem_free(got_prop, got_len); return (DDI_FAILURE); } /* * Create a ddi_parent_private_data structure from the ddi properties of * the dev_info node. * * The "reg" and either an "intr" or "interrupts" properties are required * if the driver wishes to create mappings or field interrupts on behalf * of the device. * * The "reg" property is assumed to be a list of at least one triple * * *1 * * The "intr" property is assumed to be a list of at least one duple * * *1 * * The "interrupts" property is assumed to be a list of at least one * n-tuples that describes the interrupt capabilities of the bus the device * is connected to. For SBus, this looks like * * *1 * * (This property obsoletes the 'intr' property). * * The "ranges" property is optional. */ void make_ddi_ppd(dev_info_t *child, struct ddi_parent_private_data **ppd) { struct ddi_parent_private_data *pdptr; int n; int *reg_prop, *rng_prop, *intr_prop, *irupts_prop; uint_t reg_len, rng_len, intr_len, irupts_len; *ppd = pdptr = kmem_zalloc(sizeof (*pdptr), KM_SLEEP); /* * Handle the 'reg' property. */ if ((get_prop_int_array(child, "reg", ®_prop, ®_len) == DDI_PROP_SUCCESS) && (reg_len != 0)) { pdptr->par_nreg = reg_len / (int)sizeof (struct regspec); pdptr->par_reg = (struct regspec *)reg_prop; } /* * See if I have a range (adding one where needed - this * means to add one for sbus node in sun4c, when romvec > 0, * if no range is already defined in the PROM node. * (Currently no sun4c PROMS define range properties, * but they should and may in the future.) For the SBus * node, the range is defined by the SBus reg property. */ if (get_prop_int_array(child, "ranges", &rng_prop, &rng_len) == DDI_PROP_SUCCESS) { pdptr->par_nrng = rng_len / (int)(sizeof (struct rangespec)); pdptr->par_rng = (struct rangespec *)rng_prop; } /* * Handle the 'intr' and 'interrupts' properties */ /* * For backwards compatibility * we first look for the 'intr' property for the device. */ if (get_prop_int_array(child, "intr", &intr_prop, &intr_len) != DDI_PROP_SUCCESS) { intr_len = 0; } /* * If we're to support bus adapters and future platforms cleanly, * we need to support the generalized 'interrupts' property. */ if (get_prop_int_array(child, "interrupts", &irupts_prop, &irupts_len) != DDI_PROP_SUCCESS) { irupts_len = 0; } else if (intr_len != 0) { /* * If both 'intr' and 'interrupts' are defined, * then 'interrupts' wins and we toss the 'intr' away. */ ddi_prop_free((void *)intr_prop); intr_len = 0; } if (intr_len != 0) { /* * Translate the 'intr' property into an array * an array of struct intrspec's. There's not really * very much to do here except copy what's out there. */ struct intrspec *new; struct prop_ispec *l; n = pdptr->par_nintr = intr_len / sizeof (struct prop_ispec); l = (struct prop_ispec *)intr_prop; pdptr->par_intr = new = kmem_zalloc(n * sizeof (struct intrspec), KM_SLEEP); while (n--) { new->intrspec_pri = l->pri; new->intrspec_vec = l->vec; new++; l++; } ddi_prop_free((void *)intr_prop); } else if ((n = irupts_len) != 0) { size_t size; int *out; /* * Translate the 'interrupts' property into an array * of intrspecs for the rest of the DDI framework to * toy with. Only our ancestors really know how to * do this, so ask 'em. We massage the 'interrupts' * property so that it is pre-pended by a count of * the number of integers in the argument. */ size = sizeof (int) + n; out = kmem_alloc(size, KM_SLEEP); *out = n / sizeof (int); bcopy(irupts_prop, out + 1, (size_t)n); ddi_prop_free((void *)irupts_prop); if (impl_xlate_intrs(child, out, pdptr) != DDI_SUCCESS) { cmn_err(CE_CONT, "Unable to translate 'interrupts' for %s%d\n", DEVI(child)->devi_binding_name, DEVI(child)->devi_instance); } kmem_free(out, size); } } /* * Name a child */ static int impl_sunbus_name_child(dev_info_t *child, char *name, int namelen) { /* * Fill in parent-private data and this function returns to us * an indication if it used "registers" to fill in the data. */ if (ddi_get_parent_data(child) == NULL) { struct ddi_parent_private_data *pdptr; make_ddi_ppd(child, &pdptr); ddi_set_parent_data(child, pdptr); } name[0] = '\0'; if (sparc_pd_getnreg(child) > 0) { (void) snprintf(name, namelen, "%x,%x", (uint_t)sparc_pd_getreg(child, 0)->regspec_bustype, (uint_t)sparc_pd_getreg(child, 0)->regspec_addr); } return (DDI_SUCCESS); } /* * Called from the bus_ctl op of sunbus (sbus, obio, etc) nexus drivers * to implement the DDI_CTLOPS_INITCHILD operation. That is, it names * the children of sun busses based on the reg spec. * * Handles the following properties (in make_ddi_ppd): * Property value * Name type * reg register spec * intr old-form interrupt spec * interrupts new (bus-oriented) interrupt spec * ranges range spec */ int impl_ddi_sunbus_initchild(dev_info_t *child) { char name[MAXNAMELEN]; void impl_ddi_sunbus_removechild(dev_info_t *); /* * Name the child, also makes parent private data */ (void) impl_sunbus_name_child(child, name, MAXNAMELEN); ddi_set_name_addr(child, name); /* * Attempt to merge a .conf node; if successful, remove the * .conf node. */ if ((ndi_dev_is_persistent_node(child) == 0) && (ndi_merge_node(child, impl_sunbus_name_child) == DDI_SUCCESS)) { /* * Return failure to remove node */ impl_ddi_sunbus_removechild(child); return (DDI_FAILURE); } return (DDI_SUCCESS); } void impl_free_ddi_ppd(dev_info_t *dip) { struct ddi_parent_private_data *pdptr; size_t n; if ((pdptr = ddi_get_parent_data(dip)) == NULL) return; if ((n = (size_t)pdptr->par_nintr) != 0) /* * Note that kmem_free is used here (instead of * ddi_prop_free) because the contents of the * property were placed into a separate buffer and * mucked with a bit before being stored in par_intr. * The actual return value from the prop lookup * was freed with ddi_prop_free previously. */ kmem_free(pdptr->par_intr, n * sizeof (struct intrspec)); if ((n = (size_t)pdptr->par_nrng) != 0) ddi_prop_free((void *)pdptr->par_rng); if ((n = pdptr->par_nreg) != 0) ddi_prop_free((void *)pdptr->par_reg); kmem_free(pdptr, sizeof (*pdptr)); ddi_set_parent_data(dip, NULL); } void impl_ddi_sunbus_removechild(dev_info_t *dip) { impl_free_ddi_ppd(dip); ddi_set_name_addr(dip, NULL); /* * Strip the node to properly convert it back to prototype form */ impl_rem_dev_props(dip); } /* * DDI Interrupt */ /* * turn this on to force isa, eisa, and mca device to ignore the new * hardware nodes in the device tree (normally turned on only for * drivers that need it by setting the property "ignore-hardware-nodes" * in their driver.conf file). * * 7/31/96 -- Turned off globally. Leaving variable in for the moment * as safety valve. */ int ignore_hardware_nodes = 0; /* * Local data */ static struct impl_bus_promops *impl_busp; /* * New DDI interrupt framework */ /* * i_ddi_intr_ops: * * This is the interrupt operator function wrapper for the bus function * bus_intr_op. */ int i_ddi_intr_ops(dev_info_t *dip, dev_info_t *rdip, ddi_intr_op_t op, ddi_intr_handle_impl_t *hdlp, void * result) { dev_info_t *pdip = (dev_info_t *)DEVI(dip)->devi_parent; int ret = DDI_FAILURE; /* request parent to process this interrupt op */ if (NEXUS_HAS_INTR_OP(pdip)) ret = (*(DEVI(pdip)->devi_ops->devo_bus_ops->bus_intr_op))( pdip, rdip, op, hdlp, result); else cmn_err(CE_WARN, "Failed to process interrupt " "for %s%d due to down-rev nexus driver %s%d", ddi_get_name(rdip), ddi_get_instance(rdip), ddi_get_name(pdip), ddi_get_instance(pdip)); return (ret); } /* * i_ddi_add_softint - allocate and add a soft interrupt to the system */ int i_ddi_add_softint(ddi_softint_hdl_impl_t *hdlp) { int ret; /* add soft interrupt handler */ ret = add_avsoftintr((void *)hdlp, hdlp->ih_pri, hdlp->ih_cb_func, DEVI(hdlp->ih_dip)->devi_name, hdlp->ih_cb_arg1, hdlp->ih_cb_arg2); return (ret ? DDI_SUCCESS : DDI_FAILURE); } void i_ddi_remove_softint(ddi_softint_hdl_impl_t *hdlp) { (void) rem_avsoftintr((void *)hdlp, hdlp->ih_pri, hdlp->ih_cb_func); } extern void (*setsoftint)(int, struct av_softinfo *); extern boolean_t av_check_softint_pending(struct av_softinfo *, boolean_t); int i_ddi_trigger_softint(ddi_softint_hdl_impl_t *hdlp, void *arg2) { if (av_check_softint_pending(hdlp->ih_pending, B_FALSE)) return (DDI_EPENDING); update_avsoftintr_args((void *)hdlp, hdlp->ih_pri, arg2); (*setsoftint)(hdlp->ih_pri, hdlp->ih_pending); return (DDI_SUCCESS); } /* * i_ddi_set_softint_pri: * * The way this works is that it first tries to add a softint vector * at the new priority in hdlp. If that succeeds; then it removes the * existing softint vector at the old priority. */ int i_ddi_set_softint_pri(ddi_softint_hdl_impl_t *hdlp, uint_t old_pri) { int ret; /* * If a softint is pending at the old priority then fail the request. */ if (av_check_softint_pending(hdlp->ih_pending, B_TRUE)) return (DDI_FAILURE); ret = av_softint_movepri((void *)hdlp, old_pri); return (ret ? DDI_SUCCESS : DDI_FAILURE); } void i_ddi_alloc_intr_phdl(ddi_intr_handle_impl_t *hdlp) { hdlp->ih_private = (void *)kmem_zalloc(sizeof (ihdl_plat_t), KM_SLEEP); } void i_ddi_free_intr_phdl(ddi_intr_handle_impl_t *hdlp) { kmem_free(hdlp->ih_private, sizeof (ihdl_plat_t)); hdlp->ih_private = NULL; } int i_ddi_get_intx_nintrs(dev_info_t *dip) { struct ddi_parent_private_data *pdp; if ((pdp = ddi_get_parent_data(dip)) == NULL) return (0); return (pdp->par_nintr); } /* * DDI Memory/DMA */ /* * Support for allocating DMAable memory to implement * ddi_dma_mem_alloc(9F) interface. */ #define KA_ALIGN_SHIFT 7 #define KA_ALIGN (1 << KA_ALIGN_SHIFT) #define KA_NCACHE (PAGESHIFT + 1 - KA_ALIGN_SHIFT) /* * Dummy DMA attribute template for kmem_io[].kmem_io_attr. We only * care about addr_lo, addr_hi, and align. addr_hi will be dynamically set. */ static ddi_dma_attr_t kmem_io_attr = { DMA_ATTR_V0, 0x0000000000000000ULL, /* dma_attr_addr_lo */ 0x0000000000000000ULL, /* dma_attr_addr_hi */ 0x00ffffff, 0x1000, /* dma_attr_align */ 1, 1, 0xffffffffULL, 0xffffffffULL, 0x1, 1, 0 }; /* kmem io memory ranges and indices */ enum { IO_4P, IO_64G, IO_4G, IO_2G, IO_1G, IO_512M, IO_256M, IO_128M, IO_64M, IO_32M, IO_16M, MAX_MEM_RANGES }; static struct { vmem_t *kmem_io_arena; kmem_cache_t *kmem_io_cache[KA_NCACHE]; ddi_dma_attr_t kmem_io_attr; } kmem_io[MAX_MEM_RANGES]; static int kmem_io_idx; /* index of first populated kmem_io[] */ static page_t * page_create_io_wrapper(void *addr, size_t len, int vmflag, void *arg) { extern page_t *page_create_io(vnode_t *, u_offset_t, uint_t, uint_t, struct as *, caddr_t, ddi_dma_attr_t *); return (page_create_io(&kvp, (u_offset_t)(uintptr_t)addr, len, PG_EXCL | ((vmflag & VM_NOSLEEP) ? 0 : PG_WAIT), &kas, addr, arg)); } #ifdef __xpv static void segkmem_free_io(vmem_t *vmp, void * ptr, size_t size) { extern void page_destroy_io(page_t *); segkmem_xfree(vmp, ptr, size, page_destroy_io); } #endif static void * segkmem_alloc_io_4P(vmem_t *vmp, size_t size, int vmflag) { return (segkmem_xalloc(vmp, NULL, size, vmflag, 0, page_create_io_wrapper, &kmem_io[IO_4P].kmem_io_attr)); } static void * segkmem_alloc_io_64G(vmem_t *vmp, size_t size, int vmflag) { return (segkmem_xalloc(vmp, NULL, size, vmflag, 0, page_create_io_wrapper, &kmem_io[IO_64G].kmem_io_attr)); } static void * segkmem_alloc_io_4G(vmem_t *vmp, size_t size, int vmflag) { return (segkmem_xalloc(vmp, NULL, size, vmflag, 0, page_create_io_wrapper, &kmem_io[IO_4G].kmem_io_attr)); } static void * segkmem_alloc_io_2G(vmem_t *vmp, size_t size, int vmflag) { return (segkmem_xalloc(vmp, NULL, size, vmflag, 0, page_create_io_wrapper, &kmem_io[IO_2G].kmem_io_attr)); } static void * segkmem_alloc_io_1G(vmem_t *vmp, size_t size, int vmflag) { return (segkmem_xalloc(vmp, NULL, size, vmflag, 0, page_create_io_wrapper, &kmem_io[IO_1G].kmem_io_attr)); } static void * segkmem_alloc_io_512M(vmem_t *vmp, size_t size, int vmflag) { return (segkmem_xalloc(vmp, NULL, size, vmflag, 0, page_create_io_wrapper, &kmem_io[IO_512M].kmem_io_attr)); } static void * segkmem_alloc_io_256M(vmem_t *vmp, size_t size, int vmflag) { return (segkmem_xalloc(vmp, NULL, size, vmflag, 0, page_create_io_wrapper, &kmem_io[IO_256M].kmem_io_attr)); } static void * segkmem_alloc_io_128M(vmem_t *vmp, size_t size, int vmflag) { return (segkmem_xalloc(vmp, NULL, size, vmflag, 0, page_create_io_wrapper, &kmem_io[IO_128M].kmem_io_attr)); } static void * segkmem_alloc_io_64M(vmem_t *vmp, size_t size, int vmflag) { return (segkmem_xalloc(vmp, NULL, size, vmflag, 0, page_create_io_wrapper, &kmem_io[IO_64M].kmem_io_attr)); } static void * segkmem_alloc_io_32M(vmem_t *vmp, size_t size, int vmflag) { return (segkmem_xalloc(vmp, NULL, size, vmflag, 0, page_create_io_wrapper, &kmem_io[IO_32M].kmem_io_attr)); } static void * segkmem_alloc_io_16M(vmem_t *vmp, size_t size, int vmflag) { return (segkmem_xalloc(vmp, NULL, size, vmflag, 0, page_create_io_wrapper, &kmem_io[IO_16M].kmem_io_attr)); } struct { uint64_t io_limit; char *io_name; void *(*io_alloc)(vmem_t *, size_t, int); int io_initial; /* kmem_io_init during startup */ } io_arena_params[MAX_MEM_RANGES] = { {0x000fffffffffffffULL, "kmem_io_4P", segkmem_alloc_io_4P, 1}, {0x0000000fffffffffULL, "kmem_io_64G", segkmem_alloc_io_64G, 0}, {0x00000000ffffffffULL, "kmem_io_4G", segkmem_alloc_io_4G, 1}, {0x000000007fffffffULL, "kmem_io_2G", segkmem_alloc_io_2G, 1}, {0x000000003fffffffULL, "kmem_io_1G", segkmem_alloc_io_1G, 0}, {0x000000001fffffffULL, "kmem_io_512M", segkmem_alloc_io_512M, 0}, {0x000000000fffffffULL, "kmem_io_256M", segkmem_alloc_io_256M, 0}, {0x0000000007ffffffULL, "kmem_io_128M", segkmem_alloc_io_128M, 0}, {0x0000000003ffffffULL, "kmem_io_64M", segkmem_alloc_io_64M, 0}, {0x0000000001ffffffULL, "kmem_io_32M", segkmem_alloc_io_32M, 0}, {0x0000000000ffffffULL, "kmem_io_16M", segkmem_alloc_io_16M, 1} }; void kmem_io_init(int a) { int c; char name[40]; kmem_io[a].kmem_io_arena = vmem_create(io_arena_params[a].io_name, NULL, 0, PAGESIZE, io_arena_params[a].io_alloc, #ifdef __xpv segkmem_free_io, #else segkmem_free, #endif heap_arena, 0, VM_SLEEP); for (c = 0; c < KA_NCACHE; c++) { size_t size = KA_ALIGN << c; (void) sprintf(name, "%s_%lu", io_arena_params[a].io_name, size); kmem_io[a].kmem_io_cache[c] = kmem_cache_create(name, size, size, NULL, NULL, NULL, NULL, kmem_io[a].kmem_io_arena, 0); } } /* * Return the index of the highest memory range for addr. */ static int kmem_io_index(uint64_t addr) { int n; for (n = kmem_io_idx; n < MAX_MEM_RANGES; n++) { if (kmem_io[n].kmem_io_attr.dma_attr_addr_hi <= addr) { if (kmem_io[n].kmem_io_arena == NULL) kmem_io_init(n); return (n); } } panic("kmem_io_index: invalid addr - must be at least 16m"); /*NOTREACHED*/ } /* * Return the index of the next kmem_io populated memory range * after curindex. */ static int kmem_io_index_next(int curindex) { int n; for (n = curindex + 1; n < MAX_MEM_RANGES; n++) { if (kmem_io[n].kmem_io_arena) return (n); } return (-1); } /* * allow kmem to be mapped in with different PTE cache attribute settings. * Used by i_ddi_mem_alloc() */ int kmem_override_cache_attrs(caddr_t kva, size_t size, uint_t order) { uint_t hat_flags; caddr_t kva_end; uint_t hat_attr; pfn_t pfn; if (hat_getattr(kas.a_hat, kva, &hat_attr) == -1) { return (-1); } hat_attr &= ~HAT_ORDER_MASK; hat_attr |= order | HAT_NOSYNC; hat_flags = HAT_LOAD_LOCK; kva_end = (caddr_t)(((uintptr_t)kva + size + PAGEOFFSET) & (uintptr_t)PAGEMASK); kva = (caddr_t)((uintptr_t)kva & (uintptr_t)PAGEMASK); while (kva < kva_end) { pfn = hat_getpfnum(kas.a_hat, kva); hat_unload(kas.a_hat, kva, PAGESIZE, HAT_UNLOAD_UNLOCK); hat_devload(kas.a_hat, kva, PAGESIZE, pfn, hat_attr, hat_flags); kva += MMU_PAGESIZE; } return (0); } void ka_init(void) { int a; paddr_t maxphysaddr; #if !defined(__xpv) extern pfn_t physmax; maxphysaddr = mmu_ptob((paddr_t)physmax) + MMU_PAGEOFFSET; #else maxphysaddr = mmu_ptob((paddr_t)HYPERVISOR_memory_op( XENMEM_maximum_ram_page, NULL)) + MMU_PAGEOFFSET; #endif ASSERT(maxphysaddr <= io_arena_params[0].io_limit); for (a = 0; a < MAX_MEM_RANGES; a++) { if (maxphysaddr >= io_arena_params[a + 1].io_limit) { if (maxphysaddr > io_arena_params[a + 1].io_limit) io_arena_params[a].io_limit = maxphysaddr; else a++; break; } } kmem_io_idx = a; for (; a < MAX_MEM_RANGES; a++) { kmem_io[a].kmem_io_attr = kmem_io_attr; kmem_io[a].kmem_io_attr.dma_attr_addr_hi = io_arena_params[a].io_limit; /* * initialize kmem_io[] arena/cache corresponding to * maxphysaddr and to the "common" io memory ranges that * have io_initial set to a non-zero value. */ if (io_arena_params[a].io_initial || a == kmem_io_idx) kmem_io_init(a); } } /* * put contig address/size */ static void * putctgas(void *addr, size_t size) { struct ctgas *ctgp = &ctglist; int i; CTGLOCK(); do { if ((i = ctgp->ctg_index) < CTGENTRIES) { ctgp->ctg_addr[i] = addr; ctgp->ctg_size[i] = size; ctgp->ctg_index++; break; } if (!ctgp->ctg_next) ctgp->ctg_next = kmem_zalloc(sizeof (struct ctgas), KM_NOSLEEP); ctgp = ctgp->ctg_next; } while (ctgp); CTGUNLOCK(); return (ctgp); } /* * get contig size by addr */ static size_t getctgsz(void *addr) { struct ctgas *ctgp = &ctglist; int i, j; size_t sz; ASSERT(addr); CTGLOCK(); while (ctgp) { for (i = 0; i < ctgp->ctg_index; i++) { if (addr != ctgp->ctg_addr[i]) continue; sz = ctgp->ctg_size[i]; j = --ctgp->ctg_index; if (i != j) { ctgp->ctg_size[i] = ctgp->ctg_size[j]; ctgp->ctg_addr[i] = ctgp->ctg_addr[j]; } CTGUNLOCK(); return (sz); } ctgp = ctgp->ctg_next; } CTGUNLOCK(); return (0); } /* * contig_alloc: * * allocates contiguous memory to satisfy the 'size' and dma attributes * specified in 'attr'. * * Not all of memory need to be physically contiguous if the * scatter-gather list length is greater than 1. */ /*ARGSUSED*/ void * contig_alloc(size_t size, ddi_dma_attr_t *attr, uintptr_t align, int cansleep) { pgcnt_t pgcnt = btopr(size); size_t asize = pgcnt * PAGESIZE; page_t *ppl; int pflag; void *addr; extern page_t *page_create_io(vnode_t *, u_offset_t, uint_t, uint_t, struct as *, caddr_t, ddi_dma_attr_t *); /* segkmem_xalloc */ if (align <= PAGESIZE) addr = vmem_alloc(heap_arena, asize, (cansleep) ? VM_SLEEP : VM_NOSLEEP); else addr = vmem_xalloc(heap_arena, asize, align, 0, 0, NULL, NULL, (cansleep) ? VM_SLEEP : VM_NOSLEEP); if (addr) { ASSERT(!((uintptr_t)addr & (align - 1))); if (page_resv(pgcnt, (cansleep) ? KM_SLEEP : KM_NOSLEEP) == 0) { vmem_free(heap_arena, addr, asize); return (NULL); } pflag = PG_EXCL; if (cansleep) pflag |= PG_WAIT; /* 4k req gets from freelists rather than pfn search */ if (pgcnt > 1 || align > PAGESIZE) pflag |= PG_PHYSCONTIG; ppl = page_create_io(&kvp, (u_offset_t)(uintptr_t)addr, asize, pflag, &kas, (caddr_t)addr, attr); if (!ppl) { vmem_free(heap_arena, addr, asize); page_unresv(pgcnt); return (NULL); } while (ppl != NULL) { page_t *pp = ppl; page_sub(&ppl, pp); ASSERT(page_iolock_assert(pp)); page_io_unlock(pp); page_downgrade(pp); hat_memload(kas.a_hat, (caddr_t)(uintptr_t)pp->p_offset, pp, (PROT_ALL & ~PROT_USER) | HAT_NOSYNC, HAT_LOAD_LOCK); } } return (addr); } void contig_free(void *addr, size_t size) { pgcnt_t pgcnt = btopr(size); size_t asize = pgcnt * PAGESIZE; caddr_t a, ea; page_t *pp; hat_unload(kas.a_hat, addr, asize, HAT_UNLOAD_UNLOCK); for (a = addr, ea = a + asize; a < ea; a += PAGESIZE) { pp = page_find(&kvp, (u_offset_t)(uintptr_t)a); if (!pp) panic("contig_free: contig pp not found"); if (!page_tryupgrade(pp)) { page_unlock(pp); pp = page_lookup(&kvp, (u_offset_t)(uintptr_t)a, SE_EXCL); if (pp == NULL) panic("contig_free: page freed"); } page_destroy(pp, 0); } page_unresv(pgcnt); vmem_free(heap_arena, addr, asize); } /* * Allocate from the system, aligned on a specific boundary. * The alignment, if non-zero, must be a power of 2. */ static void * kalloca(size_t size, size_t align, int cansleep, int physcontig, ddi_dma_attr_t *attr) { size_t *addr, *raddr, rsize; size_t hdrsize = 4 * sizeof (size_t); /* must be power of 2 */ int a, i, c; vmem_t *vmp; kmem_cache_t *cp = NULL; if (attr->dma_attr_addr_lo > mmu_ptob((uint64_t)ddiphysmin)) return (NULL); align = MAX(align, hdrsize); ASSERT((align & (align - 1)) == 0); /* * All of our allocators guarantee 16-byte alignment, so we don't * need to reserve additional space for the header. * To simplify picking the correct kmem_io_cache, we round up to * a multiple of KA_ALIGN. */ rsize = P2ROUNDUP_TYPED(size + align, KA_ALIGN, size_t); if (physcontig && rsize > PAGESIZE) { if (addr = contig_alloc(size, attr, align, cansleep)) { if (!putctgas(addr, size)) contig_free(addr, size); else return (addr); } return (NULL); } a = kmem_io_index(attr->dma_attr_addr_hi); if (rsize > PAGESIZE) { vmp = kmem_io[a].kmem_io_arena; raddr = vmem_alloc(vmp, rsize, (cansleep) ? VM_SLEEP : VM_NOSLEEP); } else { c = highbit((rsize >> KA_ALIGN_SHIFT) - 1); cp = kmem_io[a].kmem_io_cache[c]; raddr = kmem_cache_alloc(cp, (cansleep) ? KM_SLEEP : KM_NOSLEEP); } if (raddr == NULL) { int na; ASSERT(cansleep == 0); if (rsize > PAGESIZE) return (NULL); /* * System does not have memory in the requested range. * Try smaller kmem io ranges and larger cache sizes * to see if there might be memory available in * these other caches. */ for (na = kmem_io_index_next(a); na >= 0; na = kmem_io_index_next(na)) { ASSERT(kmem_io[na].kmem_io_arena); cp = kmem_io[na].kmem_io_cache[c]; raddr = kmem_cache_alloc(cp, KM_NOSLEEP); if (raddr) goto kallocdone; } /* now try the larger kmem io cache sizes */ for (na = a; na >= 0; na = kmem_io_index_next(na)) { for (i = c + 1; i < KA_NCACHE; i++) { cp = kmem_io[na].kmem_io_cache[i]; raddr = kmem_cache_alloc(cp, KM_NOSLEEP); if (raddr) goto kallocdone; } } return (NULL); } kallocdone: ASSERT(!P2BOUNDARY((uintptr_t)raddr, rsize, PAGESIZE) || rsize > PAGESIZE); addr = (size_t *)P2ROUNDUP((uintptr_t)raddr + hdrsize, align); ASSERT((uintptr_t)addr + size - (uintptr_t)raddr <= rsize); addr[-4] = (size_t)cp; addr[-3] = (size_t)vmp; addr[-2] = (size_t)raddr; addr[-1] = rsize; return (addr); } static void kfreea(void *addr) { size_t size; if (!((uintptr_t)addr & PAGEOFFSET) && (size = getctgsz(addr))) { contig_free(addr, size); } else { size_t *saddr = addr; if (saddr[-4] == 0) vmem_free((vmem_t *)saddr[-3], (void *)saddr[-2], saddr[-1]); else kmem_cache_free((kmem_cache_t *)saddr[-4], (void *)saddr[-2]); } } /*ARGSUSED*/ void i_ddi_devacc_to_hatacc(ddi_device_acc_attr_t *devaccp, uint_t *hataccp) { } /* * Check if the specified cache attribute is supported on the platform. * This function must be called before i_ddi_cacheattr_to_hatacc(). */ boolean_t i_ddi_check_cache_attr(uint_t flags) { /* * The cache attributes are mutually exclusive. Any combination of * the attributes leads to a failure. */ uint_t cache_attr = IOMEM_CACHE_ATTR(flags); if ((cache_attr != 0) && ((cache_attr & (cache_attr - 1)) != 0)) return (B_FALSE); /* All cache attributes are supported on X86/X64 */ if (cache_attr & (IOMEM_DATA_UNCACHED | IOMEM_DATA_CACHED | IOMEM_DATA_UC_WR_COMBINE)) return (B_TRUE); /* undefined attributes */ return (B_FALSE); } /* set HAT cache attributes from the cache attributes */ void i_ddi_cacheattr_to_hatacc(uint_t flags, uint_t *hataccp) { uint_t cache_attr = IOMEM_CACHE_ATTR(flags); static char *fname = "i_ddi_cacheattr_to_hatacc"; /* * If write-combining is not supported, then it falls back * to uncacheable. */ if (cache_attr == IOMEM_DATA_UC_WR_COMBINE && !is_x86_feature(x86_featureset, X86FSET_PAT)) cache_attr = IOMEM_DATA_UNCACHED; /* * set HAT attrs according to the cache attrs. */ switch (cache_attr) { case IOMEM_DATA_UNCACHED: *hataccp &= ~HAT_ORDER_MASK; *hataccp |= (HAT_STRICTORDER | HAT_PLAT_NOCACHE); break; case IOMEM_DATA_UC_WR_COMBINE: *hataccp &= ~HAT_ORDER_MASK; *hataccp |= (HAT_MERGING_OK | HAT_PLAT_NOCACHE); break; case IOMEM_DATA_CACHED: *hataccp &= ~HAT_ORDER_MASK; *hataccp |= HAT_UNORDERED_OK; break; /* * This case must not occur because the cache attribute is scrutinized * before this function is called. */ default: /* * set cacheable to hat attrs. */ *hataccp &= ~HAT_ORDER_MASK; *hataccp |= HAT_UNORDERED_OK; cmn_err(CE_WARN, "%s: cache_attr=0x%x is ignored.", fname, cache_attr); } } /* * This should actually be called i_ddi_dma_mem_alloc. There should * also be an i_ddi_pio_mem_alloc. i_ddi_dma_mem_alloc should call * through the device tree with the DDI_CTLOPS_DMA_ALIGN ctl ops to * get alignment requirements for DMA memory. i_ddi_pio_mem_alloc * should use DDI_CTLOPS_PIO_ALIGN. Since we only have i_ddi_mem_alloc * so far which is used for both, DMA and PIO, we have to use the DMA * ctl ops to make everybody happy. */ /*ARGSUSED*/ int i_ddi_mem_alloc(dev_info_t *dip, ddi_dma_attr_t *attr, size_t length, int cansleep, int flags, ddi_device_acc_attr_t *accattrp, caddr_t *kaddrp, size_t *real_length, ddi_acc_hdl_t *ap) { caddr_t a; int iomin; ddi_acc_impl_t *iap; int physcontig = 0; pgcnt_t npages; pgcnt_t minctg; uint_t order; int e; /* * Check legality of arguments */ if (length == 0 || kaddrp == NULL || attr == NULL) { return (DDI_FAILURE); } if (attr->dma_attr_minxfer == 0 || attr->dma_attr_align == 0 || (attr->dma_attr_align & (attr->dma_attr_align - 1)) || (attr->dma_attr_minxfer & (attr->dma_attr_minxfer - 1))) { return (DDI_FAILURE); } /* * figure out most restrictive alignment requirement */ iomin = attr->dma_attr_minxfer; iomin = maxbit(iomin, attr->dma_attr_align); if (iomin == 0) return (DDI_FAILURE); ASSERT((iomin & (iomin - 1)) == 0); /* * if we allocate memory with IOMEM_DATA_UNCACHED or * IOMEM_DATA_UC_WR_COMBINE, make sure we allocate a page aligned * memory that ends on a page boundry. * Don't want to have to different cache mappings to the same * physical page. */ if (OVERRIDE_CACHE_ATTR(flags)) { iomin = (iomin + MMU_PAGEOFFSET) & MMU_PAGEMASK; length = (length + MMU_PAGEOFFSET) & (size_t)MMU_PAGEMASK; } /* * Determine if we need to satisfy the request for physically * contiguous memory or alignments larger than pagesize. */ npages = btopr(length + attr->dma_attr_align); minctg = howmany(npages, attr->dma_attr_sgllen); if (minctg > 1) { uint64_t pfnseg = attr->dma_attr_seg >> PAGESHIFT; /* * verify that the minimum contig requirement for the * actual length does not cross segment boundary. */ length = P2ROUNDUP_TYPED(length, attr->dma_attr_minxfer, size_t); npages = btopr(length); minctg = howmany(npages, attr->dma_attr_sgllen); if (minctg > pfnseg + 1) return (DDI_FAILURE); physcontig = 1; } else { length = P2ROUNDUP_TYPED(length, iomin, size_t); } /* * Allocate the requested amount from the system. */ a = kalloca(length, iomin, cansleep, physcontig, attr); if ((*kaddrp = a) == NULL) return (DDI_FAILURE); /* * if we to modify the cache attributes, go back and muck with the * mappings. */ if (OVERRIDE_CACHE_ATTR(flags)) { order = 0; i_ddi_cacheattr_to_hatacc(flags, &order); e = kmem_override_cache_attrs(a, length, order); if (e != 0) { kfreea(a); return (DDI_FAILURE); } } if (real_length) { *real_length = length; } if (ap) { /* * initialize access handle */ iap = (ddi_acc_impl_t *)ap->ah_platform_private; iap->ahi_acc_attr |= DDI_ACCATTR_CPU_VADDR; impl_acc_hdl_init(ap); } return (DDI_SUCCESS); } /* * covert old DMA limits structure to DMA attribute structure * and continue */ int i_ddi_mem_alloc_lim(dev_info_t *dip, ddi_dma_lim_t *limits, size_t length, int cansleep, int streaming, ddi_device_acc_attr_t *accattrp, caddr_t *kaddrp, uint_t *real_length, ddi_acc_hdl_t *ap) { ddi_dma_attr_t dma_attr, *attrp; size_t rlen; int ret; if (limits == NULL) { return (DDI_FAILURE); } /* * set up DMA attribute structure to pass to i_ddi_mem_alloc() */ attrp = &dma_attr; attrp->dma_attr_version = DMA_ATTR_V0; attrp->dma_attr_addr_lo = (uint64_t)limits->dlim_addr_lo; attrp->dma_attr_addr_hi = (uint64_t)limits->dlim_addr_hi; attrp->dma_attr_count_max = (uint64_t)limits->dlim_ctreg_max; attrp->dma_attr_align = 1; attrp->dma_attr_burstsizes = (uint_t)limits->dlim_burstsizes; attrp->dma_attr_minxfer = (uint32_t)limits->dlim_minxfer; attrp->dma_attr_maxxfer = (uint64_t)limits->dlim_reqsize; attrp->dma_attr_seg = (uint64_t)limits->dlim_adreg_max; attrp->dma_attr_sgllen = limits->dlim_sgllen; attrp->dma_attr_granular = (uint32_t)limits->dlim_granular; attrp->dma_attr_flags = 0; ret = i_ddi_mem_alloc(dip, attrp, length, cansleep, streaming, accattrp, kaddrp, &rlen, ap); if (ret == DDI_SUCCESS) { if (real_length) *real_length = (uint_t)rlen; } return (ret); } /* ARGSUSED */ void i_ddi_mem_free(caddr_t kaddr, ddi_acc_hdl_t *ap) { if (ap != NULL) { /* * if we modified the cache attributes on alloc, go back and * fix them since this memory could be returned to the * general pool. */ if (OVERRIDE_CACHE_ATTR(ap->ah_xfermodes)) { uint_t order = 0; int e; i_ddi_cacheattr_to_hatacc(IOMEM_DATA_CACHED, &order); e = kmem_override_cache_attrs(kaddr, ap->ah_len, order); if (e != 0) { cmn_err(CE_WARN, "i_ddi_mem_free() failed to " "override cache attrs, memory leaked\n"); return; } } } kfreea(kaddr); } /* * Access Barriers * */ /*ARGSUSED*/ int i_ddi_ontrap(ddi_acc_handle_t hp) { return (DDI_FAILURE); } /*ARGSUSED*/ void i_ddi_notrap(ddi_acc_handle_t hp) { } /* * Misc Functions */ /* * Implementation instance override functions * * No override on i86pc */ /*ARGSUSED*/ uint_t impl_assign_instance(dev_info_t *dip) { return ((uint_t)-1); } /*ARGSUSED*/ int impl_keep_instance(dev_info_t *dip) { #if defined(__xpv) /* * Do not persist instance numbers assigned to devices in dom0 */ dev_info_t *pdip; if (DOMAIN_IS_INITDOMAIN(xen_info)) { if (((pdip = ddi_get_parent(dip)) != NULL) && (strcmp(ddi_get_name(pdip), "xpvd") == 0)) return (DDI_SUCCESS); } #endif return (DDI_FAILURE); } /*ARGSUSED*/ int impl_free_instance(dev_info_t *dip) { return (DDI_FAILURE); } /*ARGSUSED*/ int impl_check_cpu(dev_info_t *devi) { return (DDI_SUCCESS); } /* * Referenced in common/cpr_driver.c: Power off machine. * Don't know how to power off i86pc. */ void arch_power_down() {} /* * Copy name to property_name, since name * is in the low address range below kernelbase. */ static void copy_boot_str(const char *boot_str, char *kern_str, int len) { int i = 0; while (i < len - 1 && boot_str[i] != '\0') { kern_str[i] = boot_str[i]; i++; } kern_str[i] = 0; /* null terminate */ if (boot_str[i] != '\0') cmn_err(CE_WARN, "boot property string is truncated to %s", kern_str); } static void get_boot_properties(void) { extern char hw_provider[]; dev_info_t *devi; char *name; int length; char property_name[50], property_val[50]; void *bop_staging_area; bop_staging_area = kmem_zalloc(MMU_PAGESIZE, KM_NOSLEEP); /* * Import "root" properties from the boot. * * We do this by invoking BOP_NEXTPROP until the list * is completely copied in. */ devi = ddi_root_node(); for (name = BOP_NEXTPROP(bootops, ""); /* get first */ name; /* NULL => DONE */ name = BOP_NEXTPROP(bootops, name)) { /* get next */ /* copy string to memory above kernelbase */ copy_boot_str(name, property_name, 50); /* * Skip vga properties. They will be picked up later * by get_vga_properties. */ if (strcmp(property_name, "display-edif-block") == 0 || strcmp(property_name, "display-edif-id") == 0) { continue; } length = BOP_GETPROPLEN(bootops, property_name); if (length == 0) continue; if (length > MMU_PAGESIZE) { cmn_err(CE_NOTE, "boot property %s longer than 0x%x, ignored\n", property_name, MMU_PAGESIZE); continue; } BOP_GETPROP(bootops, property_name, bop_staging_area); /* * special properties: * si-machine, si-hw-provider * goes to kernel data structures. * bios-boot-device and stdout * goes to hardware property list so it may show up * in the prtconf -vp output. This is needed by * Install/Upgrade. Once we fix install upgrade, * this can be taken out. */ if (strcmp(name, "si-machine") == 0) { (void) strncpy(utsname.machine, bop_staging_area, SYS_NMLN); utsname.machine[SYS_NMLN - 1] = (char)NULL; } else if (strcmp(name, "si-hw-provider") == 0) { (void) strncpy(hw_provider, bop_staging_area, SYS_NMLN); hw_provider[SYS_NMLN - 1] = (char)NULL; } else if (strcmp(name, "bios-boot-device") == 0) { copy_boot_str(bop_staging_area, property_val, 50); (void) ndi_prop_update_string(DDI_DEV_T_NONE, devi, property_name, property_val); } else if (strcmp(name, "stdout") == 0) { (void) ndi_prop_update_int(DDI_DEV_T_NONE, devi, property_name, *((int *)bop_staging_area)); } else { /* Property type unknown, use old prop interface */ (void) e_ddi_prop_create(DDI_DEV_T_NONE, devi, DDI_PROP_CANSLEEP, property_name, bop_staging_area, length); } } kmem_free(bop_staging_area, MMU_PAGESIZE); } static void get_vga_properties(void) { dev_info_t *devi; major_t major; char *name; int length; char property_val[50]; void *bop_staging_area; /* * XXXX Hack Allert! * There really needs to be a better way for identifying various * console framebuffers and their related issues. Till then, * check for this one as a replacement to vgatext. */ major = ddi_name_to_major("ragexl"); if (major == (major_t)-1) { major = ddi_name_to_major("vgatext"); if (major == (major_t)-1) return; } devi = devnamesp[major].dn_head; if (devi == NULL) return; bop_staging_area = kmem_zalloc(MMU_PAGESIZE, KM_SLEEP); /* * Import "vga" properties from the boot. */ name = "display-edif-block"; length = BOP_GETPROPLEN(bootops, name); if (length > 0 && length < MMU_PAGESIZE) { BOP_GETPROP(bootops, name, bop_staging_area); (void) ndi_prop_update_byte_array(DDI_DEV_T_NONE, devi, name, bop_staging_area, length); } /* * kdmconfig is also looking for display-type and * video-adapter-type. We default to color and svga. * * Could it be "monochrome", "vga"? * Nah, you've got to come to the 21st century... * And you can set monitor type manually in kdmconfig * if you are really an old junky. */ (void) ndi_prop_update_string(DDI_DEV_T_NONE, devi, "display-type", "color"); (void) ndi_prop_update_string(DDI_DEV_T_NONE, devi, "video-adapter-type", "svga"); name = "display-edif-id"; length = BOP_GETPROPLEN(bootops, name); if (length > 0 && length < MMU_PAGESIZE) { BOP_GETPROP(bootops, name, bop_staging_area); copy_boot_str(bop_staging_area, property_val, length); (void) ndi_prop_update_string(DDI_DEV_T_NONE, devi, name, property_val); } kmem_free(bop_staging_area, MMU_PAGESIZE); } /* * This is temporary, but absolutely necessary. If we are being * booted with a device tree created by the DevConf project's bootconf * program, then we have device information nodes that reflect * reality. At this point in time in the Solaris release schedule, the * kernel drivers aren't prepared for reality. They still depend on their * own ad-hoc interpretations of the properties created when their .conf * files were interpreted. These drivers use an "ignore-hardware-nodes" * property to prevent them from using the nodes passed up from the bootconf * device tree. * * Trying to assemble root file system drivers as we are booting from * devconf will fail if the kernel driver is basing its name_addr's on the * psuedo-node device info while the bootpath passed up from bootconf is using * reality-based name_addrs. We help the boot along in this case by * looking at the pre-bootconf bootpath and determining if we would have * successfully matched if that had been the bootpath we had chosen. * * Note that we only even perform this extra check if we've booted * using bootconf's 1275 compliant bootpath, this is the boot device, and * we're trying to match the name_addr specified in the 1275 bootpath. */ #define MAXCOMPONENTLEN 32 int x86_old_bootpath_name_addr_match(dev_info_t *cdip, char *caddr, char *naddr) { /* * There are multiple criteria to be met before we can even * consider allowing a name_addr match here. * * 1) We must have been booted such that the bootconf program * created device tree nodes and properties. This can be * determined by examining the 'bootpath' property. This * property will be a non-null string iff bootconf was * involved in the boot. * * 2) The module that we want to match must be the boot device. * * 3) The instance of the module we are thinking of letting be * our match must be ignoring hardware nodes. * * 4) The name_addr we want to match must be the name_addr * specified in the 1275 bootpath. */ static char bootdev_module[MAXCOMPONENTLEN]; static char bootdev_oldmod[MAXCOMPONENTLEN]; static char bootdev_newaddr[MAXCOMPONENTLEN]; static char bootdev_oldaddr[MAXCOMPONENTLEN]; static int quickexit; char *daddr; int dlen; char *lkupname; int rv = DDI_FAILURE; if ((ddi_getlongprop(DDI_DEV_T_ANY, cdip, DDI_PROP_DONTPASS, "devconf-addr", (caddr_t)&daddr, &dlen) == DDI_PROP_SUCCESS) && (ddi_getprop(DDI_DEV_T_ANY, cdip, DDI_PROP_DONTPASS, "ignore-hardware-nodes", -1) != -1)) { if (strcmp(daddr, caddr) == 0) { return (DDI_SUCCESS); } } if (quickexit) return (rv); if (bootdev_module[0] == '\0') { char *addrp, *eoaddrp; char *busp, *modp, *atp; char *bp1275, *bp; int bp1275len, bplen; bp1275 = bp = addrp = eoaddrp = busp = modp = atp = NULL; if (ddi_getlongprop(DDI_DEV_T_ANY, ddi_root_node(), 0, "bootpath", (caddr_t)&bp1275, &bp1275len) != DDI_PROP_SUCCESS || bp1275len <= 1) { /* * We didn't boot from bootconf so we never need to * do any special matches. */ quickexit = 1; if (bp1275) kmem_free(bp1275, bp1275len); return (rv); } if (ddi_getlongprop(DDI_DEV_T_ANY, ddi_root_node(), 0, "boot-path", (caddr_t)&bp, &bplen) != DDI_PROP_SUCCESS || bplen <= 1) { /* * No fallback position for matching. This is * certainly unexpected, but we'll handle it * just in case. */ quickexit = 1; kmem_free(bp1275, bp1275len); if (bp) kmem_free(bp, bplen); return (rv); } /* * Determine boot device module and 1275 name_addr * * bootpath assumed to be of the form /bus/module@name_addr */ if (busp = strchr(bp1275, '/')) { if (modp = strchr(busp + 1, '/')) { if (atp = strchr(modp + 1, '@')) { *atp = '\0'; addrp = atp + 1; if (eoaddrp = strchr(addrp, '/')) *eoaddrp = '\0'; } } } if (modp && addrp) { (void) strncpy(bootdev_module, modp + 1, MAXCOMPONENTLEN); bootdev_module[MAXCOMPONENTLEN - 1] = '\0'; (void) strncpy(bootdev_newaddr, addrp, MAXCOMPONENTLEN); bootdev_newaddr[MAXCOMPONENTLEN - 1] = '\0'; } else { quickexit = 1; kmem_free(bp1275, bp1275len); kmem_free(bp, bplen); return (rv); } /* * Determine fallback name_addr * * 10/3/96 - Also save fallback module name because it * might actually be different than the current module * name. E.G., ISA pnp drivers have new names. * * bootpath assumed to be of the form /bus/module@name_addr */ addrp = NULL; if (busp = strchr(bp, '/')) { if (modp = strchr(busp + 1, '/')) { if (atp = strchr(modp + 1, '@')) { *atp = '\0'; addrp = atp + 1; if (eoaddrp = strchr(addrp, '/')) *eoaddrp = '\0'; } } } if (modp && addrp) { (void) strncpy(bootdev_oldmod, modp + 1, MAXCOMPONENTLEN); bootdev_module[MAXCOMPONENTLEN - 1] = '\0'; (void) strncpy(bootdev_oldaddr, addrp, MAXCOMPONENTLEN); bootdev_oldaddr[MAXCOMPONENTLEN - 1] = '\0'; } /* Free up the bootpath storage now that we're done with it. */ kmem_free(bp1275, bp1275len); kmem_free(bp, bplen); if (bootdev_oldaddr[0] == '\0') { quickexit = 1; return (rv); } } if (((lkupname = ddi_get_name(cdip)) != NULL) && (strcmp(bootdev_module, lkupname) == 0 || strcmp(bootdev_oldmod, lkupname) == 0) && ((ddi_getprop(DDI_DEV_T_ANY, cdip, DDI_PROP_DONTPASS, "ignore-hardware-nodes", -1) != -1) || ignore_hardware_nodes) && strcmp(bootdev_newaddr, caddr) == 0 && strcmp(bootdev_oldaddr, naddr) == 0) { rv = DDI_SUCCESS; } return (rv); } /* * Perform a copy from a memory mapped device (whose devinfo pointer is devi) * separately mapped at devaddr in the kernel to a kernel buffer at kaddr. */ /*ARGSUSED*/ int e_ddi_copyfromdev(dev_info_t *devi, off_t off, const void *devaddr, void *kaddr, size_t len) { bcopy(devaddr, kaddr, len); return (0); } /* * Perform a copy to a memory mapped device (whose devinfo pointer is devi) * separately mapped at devaddr in the kernel from a kernel buffer at kaddr. */ /*ARGSUSED*/ int e_ddi_copytodev(dev_info_t *devi, off_t off, const void *kaddr, void *devaddr, size_t len) { bcopy(kaddr, devaddr, len); return (0); } static int poke_mem(peekpoke_ctlops_t *in_args) { int err = DDI_SUCCESS; on_trap_data_t otd; /* Set up protected environment. */ if (!on_trap(&otd, OT_DATA_ACCESS)) { switch (in_args->size) { case sizeof (uint8_t): *(uint8_t *)(in_args->dev_addr) = *(uint8_t *)in_args->host_addr; break; case sizeof (uint16_t): *(uint16_t *)(in_args->dev_addr) = *(uint16_t *)in_args->host_addr; break; case sizeof (uint32_t): *(uint32_t *)(in_args->dev_addr) = *(uint32_t *)in_args->host_addr; break; case sizeof (uint64_t): *(uint64_t *)(in_args->dev_addr) = *(uint64_t *)in_args->host_addr; break; default: err = DDI_FAILURE; break; } } else err = DDI_FAILURE; /* Take down protected environment. */ no_trap(); return (err); } static int peek_mem(peekpoke_ctlops_t *in_args) { int err = DDI_SUCCESS; on_trap_data_t otd; if (!on_trap(&otd, OT_DATA_ACCESS)) { switch (in_args->size) { case sizeof (uint8_t): *(uint8_t *)in_args->host_addr = *(uint8_t *)in_args->dev_addr; break; case sizeof (uint16_t): *(uint16_t *)in_args->host_addr = *(uint16_t *)in_args->dev_addr; break; case sizeof (uint32_t): *(uint32_t *)in_args->host_addr = *(uint32_t *)in_args->dev_addr; break; case sizeof (uint64_t): *(uint64_t *)in_args->host_addr = *(uint64_t *)in_args->dev_addr; break; default: err = DDI_FAILURE; break; } } else err = DDI_FAILURE; no_trap(); return (err); } /* * This is called only to process peek/poke when the DIP is NULL. * Assume that this is for memory, as nexi take care of device safe accesses. */ int peekpoke_mem(ddi_ctl_enum_t cmd, peekpoke_ctlops_t *in_args) { return (cmd == DDI_CTLOPS_PEEK ? peek_mem(in_args) : poke_mem(in_args)); } /* * we've just done a cautious put/get. Check if it was successful by * calling pci_ereport_post() on all puts and for any gets that return -1 */ static int pci_peekpoke_check_fma(dev_info_t *dip, void *arg, ddi_ctl_enum_t ctlop, void (*scan)(dev_info_t *, ddi_fm_error_t *)) { int rval = DDI_SUCCESS; peekpoke_ctlops_t *in_args = (peekpoke_ctlops_t *)arg; ddi_fm_error_t de; ddi_acc_impl_t *hp = (ddi_acc_impl_t *)in_args->handle; ddi_acc_hdl_t *hdlp = (ddi_acc_hdl_t *)in_args->handle; int check_err = 0; int repcount = in_args->repcount; if (ctlop == DDI_CTLOPS_POKE && hdlp->ah_acc.devacc_attr_access != DDI_CAUTIOUS_ACC) return (DDI_SUCCESS); if (ctlop == DDI_CTLOPS_PEEK && hdlp->ah_acc.devacc_attr_access != DDI_CAUTIOUS_ACC) { for (; repcount; repcount--) { switch (in_args->size) { case sizeof (uint8_t): if (*(uint8_t *)in_args->host_addr == 0xff) check_err = 1; break; case sizeof (uint16_t): if (*(uint16_t *)in_args->host_addr == 0xffff) check_err = 1; break; case sizeof (uint32_t): if (*(uint32_t *)in_args->host_addr == 0xffffffff) check_err = 1; break; case sizeof (uint64_t): if (*(uint64_t *)in_args->host_addr == 0xffffffffffffffff) check_err = 1; break; } } if (check_err == 0) return (DDI_SUCCESS); } /* * for a cautious put or get or a non-cautious get that returned -1 call * io framework to see if there really was an error */ bzero(&de, sizeof (ddi_fm_error_t)); de.fme_version = DDI_FME_VERSION; de.fme_ena = fm_ena_generate(0, FM_ENA_FMT1); if (hdlp->ah_acc.devacc_attr_access == DDI_CAUTIOUS_ACC) { de.fme_flag = DDI_FM_ERR_EXPECTED; de.fme_acc_handle = in_args->handle; } else if (hdlp->ah_acc.devacc_attr_access == DDI_DEFAULT_ACC) { /* * We only get here with DDI_DEFAULT_ACC for config space gets. * Non-hardened drivers may be probing the hardware and * expecting -1 returned. So need to treat errors on * DDI_DEFAULT_ACC as DDI_FM_ERR_EXPECTED. */ de.fme_flag = DDI_FM_ERR_EXPECTED; de.fme_acc_handle = in_args->handle; } else { /* * Hardened driver doing protected accesses shouldn't * get errors unless there's a hardware problem. Treat * as nonfatal if there's an error, but set UNEXPECTED * so we raise ereports on any errors and potentially * fault the device */ de.fme_flag = DDI_FM_ERR_UNEXPECTED; } (void) scan(dip, &de); if (hdlp->ah_acc.devacc_attr_access != DDI_DEFAULT_ACC && de.fme_status != DDI_FM_OK) { ndi_err_t *errp = (ndi_err_t *)hp->ahi_err; rval = DDI_FAILURE; errp->err_ena = de.fme_ena; errp->err_expected = de.fme_flag; errp->err_status = DDI_FM_NONFATAL; } return (rval); } /* * pci_peekpoke_check_nofma() is for when an error occurs on a register access * during pci_ereport_post(). We can't call pci_ereport_post() again or we'd * recurse, so assume all puts are OK and gets have failed if they return -1 */ static int pci_peekpoke_check_nofma(void *arg, ddi_ctl_enum_t ctlop) { int rval = DDI_SUCCESS; peekpoke_ctlops_t *in_args = (peekpoke_ctlops_t *)arg; ddi_acc_impl_t *hp = (ddi_acc_impl_t *)in_args->handle; ddi_acc_hdl_t *hdlp = (ddi_acc_hdl_t *)in_args->handle; int repcount = in_args->repcount; if (ctlop == DDI_CTLOPS_POKE) return (rval); for (; repcount; repcount--) { switch (in_args->size) { case sizeof (uint8_t): if (*(uint8_t *)in_args->host_addr == 0xff) rval = DDI_FAILURE; break; case sizeof (uint16_t): if (*(uint16_t *)in_args->host_addr == 0xffff) rval = DDI_FAILURE; break; case sizeof (uint32_t): if (*(uint32_t *)in_args->host_addr == 0xffffffff) rval = DDI_FAILURE; break; case sizeof (uint64_t): if (*(uint64_t *)in_args->host_addr == 0xffffffffffffffff) rval = DDI_FAILURE; break; } } if (hdlp->ah_acc.devacc_attr_access != DDI_DEFAULT_ACC && rval == DDI_FAILURE) { ndi_err_t *errp = (ndi_err_t *)hp->ahi_err; errp->err_ena = fm_ena_generate(0, FM_ENA_FMT1); errp->err_expected = DDI_FM_ERR_UNEXPECTED; errp->err_status = DDI_FM_NONFATAL; } return (rval); } int pci_peekpoke_check(dev_info_t *dip, dev_info_t *rdip, ddi_ctl_enum_t ctlop, void *arg, void *result, int (*handler)(dev_info_t *, dev_info_t *, ddi_ctl_enum_t, void *, void *), kmutex_t *err_mutexp, kmutex_t *peek_poke_mutexp, void (*scan)(dev_info_t *, ddi_fm_error_t *)) { int rval; peekpoke_ctlops_t *in_args = (peekpoke_ctlops_t *)arg; ddi_acc_impl_t *hp = (ddi_acc_impl_t *)in_args->handle; /* * this function only supports cautious accesses, not peeks/pokes * which don't have a handle */ if (hp == NULL) return (DDI_FAILURE); if (hp->ahi_acc_attr & DDI_ACCATTR_CONFIG_SPACE) { if (!mutex_tryenter(err_mutexp)) { /* * As this may be a recursive call from within * pci_ereport_post() we can't wait for the mutexes. * Fortunately we know someone is already calling * pci_ereport_post() which will handle the error bits * for us, and as this is a config space access we can * just do the access and check return value for -1 * using pci_peekpoke_check_nofma(). */ rval = handler(dip, rdip, ctlop, arg, result); if (rval == DDI_SUCCESS) rval = pci_peekpoke_check_nofma(arg, ctlop); return (rval); } /* * This can't be a recursive call. Drop the err_mutex and get * both mutexes in the right order. If an error hasn't already * been detected by the ontrap code, use pci_peekpoke_check_fma * which will call pci_ereport_post() to check error status. */ mutex_exit(err_mutexp); } mutex_enter(peek_poke_mutexp); rval = handler(dip, rdip, ctlop, arg, result); if (rval == DDI_SUCCESS) { mutex_enter(err_mutexp); rval = pci_peekpoke_check_fma(dip, arg, ctlop, scan); mutex_exit(err_mutexp); } mutex_exit(peek_poke_mutexp); return (rval); } void impl_setup_ddi(void) { #if !defined(__xpv) extern void startup_bios_disk(void); extern int post_fastreboot; #endif dev_info_t *xdip, *isa_dip; rd_existing_t rd_mem_prop; int err; ndi_devi_alloc_sleep(ddi_root_node(), "ramdisk", (pnode_t)DEVI_SID_NODEID, &xdip); (void) BOP_GETPROP(bootops, "ramdisk_start", (void *)&ramdisk_start); (void) BOP_GETPROP(bootops, "ramdisk_end", (void *)&ramdisk_end); #ifdef __xpv ramdisk_start -= ONE_GIG; ramdisk_end -= ONE_GIG; #endif rd_mem_prop.phys = ramdisk_start; rd_mem_prop.size = ramdisk_end - ramdisk_start + 1; (void) ndi_prop_update_byte_array(DDI_DEV_T_NONE, xdip, RD_EXISTING_PROP_NAME, (uchar_t *)&rd_mem_prop, sizeof (rd_mem_prop)); err = ndi_devi_bind_driver(xdip, 0); ASSERT(err == 0); /* isa node */ if (pseudo_isa) { ndi_devi_alloc_sleep(ddi_root_node(), "isa", (pnode_t)DEVI_SID_NODEID, &isa_dip); (void) ndi_prop_update_string(DDI_DEV_T_NONE, isa_dip, "device_type", "isa"); (void) ndi_prop_update_string(DDI_DEV_T_NONE, isa_dip, "bus-type", "isa"); (void) ndi_devi_bind_driver(isa_dip, 0); } /* * Read in the properties from the boot. */ get_boot_properties(); /* not framebuffer should be enumerated, if present */ get_vga_properties(); /* * Check for administratively disabled drivers. */ check_driver_disable(); #if !defined(__xpv) if (!post_fastreboot) startup_bios_disk(); #endif /* do bus dependent probes. */ impl_bus_initialprobe(); } dev_t getrootdev(void) { /* * Precedence given to rootdev if set in /etc/system */ if (root_is_svm == B_TRUE) { return (ddi_pathname_to_dev_t(svm_bootpath)); } /* * Usually rootfs.bo_name is initialized by the * the bootpath property from bootenv.rc, but * defaults to "/ramdisk:a" otherwise. */ return (ddi_pathname_to_dev_t(rootfs.bo_name)); } static struct bus_probe { struct bus_probe *next; void (*probe)(int); } *bus_probes; void impl_bus_add_probe(void (*func)(int)) { struct bus_probe *probe; struct bus_probe *lastprobe = NULL; probe = kmem_alloc(sizeof (*probe), KM_SLEEP); probe->probe = func; probe->next = NULL; if (!bus_probes) { bus_probes = probe; return; } lastprobe = bus_probes; while (lastprobe->next) lastprobe = lastprobe->next; lastprobe->next = probe; } /*ARGSUSED*/ void impl_bus_delete_probe(void (*func)(int)) { struct bus_probe *prev = NULL; struct bus_probe *probe = bus_probes; while (probe) { if (probe->probe == func) break; prev = probe; probe = probe->next; } if (probe == NULL) return; if (prev) prev->next = probe->next; else bus_probes = probe->next; kmem_free(probe, sizeof (struct bus_probe)); } /* * impl_bus_initialprobe * Modload the prom simulator, then let it probe to verify existence * and type of PCI support. */ static void impl_bus_initialprobe(void) { struct bus_probe *probe; /* load modules to install bus probes */ #if defined(__xpv) if (DOMAIN_IS_INITDOMAIN(xen_info)) { if (modload("misc", "pci_autoconfig") < 0) { panic("failed to load misc/pci_autoconfig"); } if (modload("drv", "isa") < 0) panic("failed to load drv/isa"); } (void) modload("misc", "xpv_autoconfig"); #else if (modload("misc", "pci_autoconfig") < 0) { panic("failed to load misc/pci_autoconfig"); } (void) modload("misc", "acpidev"); if (modload("drv", "isa") < 0) panic("failed to load drv/isa"); #endif probe = bus_probes; while (probe) { /* run the probe functions */ (*probe->probe)(0); probe = probe->next; } } /* * impl_bus_reprobe * Reprogram devices not set up by firmware. */ static void impl_bus_reprobe(void) { struct bus_probe *probe; probe = bus_probes; while (probe) { /* run the probe function */ (*probe->probe)(1); probe = probe->next; } } /* * The following functions ready a cautious request to go up to the nexus * driver. It is up to the nexus driver to decide how to process the request. * It may choose to call i_ddi_do_caut_get/put in this file, or do it * differently. */ static void i_ddi_caut_getput_ctlops(ddi_acc_impl_t *hp, uint64_t host_addr, uint64_t dev_addr, size_t size, size_t repcount, uint_t flags, ddi_ctl_enum_t cmd) { peekpoke_ctlops_t cautacc_ctlops_arg; cautacc_ctlops_arg.size = size; cautacc_ctlops_arg.dev_addr = dev_addr; cautacc_ctlops_arg.host_addr = host_addr; cautacc_ctlops_arg.handle = (ddi_acc_handle_t)hp; cautacc_ctlops_arg.repcount = repcount; cautacc_ctlops_arg.flags = flags; (void) ddi_ctlops(hp->ahi_common.ah_dip, hp->ahi_common.ah_dip, cmd, &cautacc_ctlops_arg, NULL); } uint8_t i_ddi_caut_get8(ddi_acc_impl_t *hp, uint8_t *addr) { uint8_t value; i_ddi_caut_getput_ctlops(hp, (uintptr_t)&value, (uintptr_t)addr, sizeof (uint8_t), 1, 0, DDI_CTLOPS_PEEK); return (value); } uint16_t i_ddi_caut_get16(ddi_acc_impl_t *hp, uint16_t *addr) { uint16_t value; i_ddi_caut_getput_ctlops(hp, (uintptr_t)&value, (uintptr_t)addr, sizeof (uint16_t), 1, 0, DDI_CTLOPS_PEEK); return (value); } uint32_t i_ddi_caut_get32(ddi_acc_impl_t *hp, uint32_t *addr) { uint32_t value; i_ddi_caut_getput_ctlops(hp, (uintptr_t)&value, (uintptr_t)addr, sizeof (uint32_t), 1, 0, DDI_CTLOPS_PEEK); return (value); } uint64_t i_ddi_caut_get64(ddi_acc_impl_t *hp, uint64_t *addr) { uint64_t value; i_ddi_caut_getput_ctlops(hp, (uintptr_t)&value, (uintptr_t)addr, sizeof (uint64_t), 1, 0, DDI_CTLOPS_PEEK); return (value); } void i_ddi_caut_put8(ddi_acc_impl_t *hp, uint8_t *addr, uint8_t value) { i_ddi_caut_getput_ctlops(hp, (uintptr_t)&value, (uintptr_t)addr, sizeof (uint8_t), 1, 0, DDI_CTLOPS_POKE); } void i_ddi_caut_put16(ddi_acc_impl_t *hp, uint16_t *addr, uint16_t value) { i_ddi_caut_getput_ctlops(hp, (uintptr_t)&value, (uintptr_t)addr, sizeof (uint16_t), 1, 0, DDI_CTLOPS_POKE); } void i_ddi_caut_put32(ddi_acc_impl_t *hp, uint32_t *addr, uint32_t value) { i_ddi_caut_getput_ctlops(hp, (uintptr_t)&value, (uintptr_t)addr, sizeof (uint32_t), 1, 0, DDI_CTLOPS_POKE); } void i_ddi_caut_put64(ddi_acc_impl_t *hp, uint64_t *addr, uint64_t value) { i_ddi_caut_getput_ctlops(hp, (uintptr_t)&value, (uintptr_t)addr, sizeof (uint64_t), 1, 0, DDI_CTLOPS_POKE); } void i_ddi_caut_rep_get8(ddi_acc_impl_t *hp, uint8_t *host_addr, uint8_t *dev_addr, size_t repcount, uint_t flags) { i_ddi_caut_getput_ctlops(hp, (uintptr_t)host_addr, (uintptr_t)dev_addr, sizeof (uint8_t), repcount, flags, DDI_CTLOPS_PEEK); } void i_ddi_caut_rep_get16(ddi_acc_impl_t *hp, uint16_t *host_addr, uint16_t *dev_addr, size_t repcount, uint_t flags) { i_ddi_caut_getput_ctlops(hp, (uintptr_t)host_addr, (uintptr_t)dev_addr, sizeof (uint16_t), repcount, flags, DDI_CTLOPS_PEEK); } void i_ddi_caut_rep_get32(ddi_acc_impl_t *hp, uint32_t *host_addr, uint32_t *dev_addr, size_t repcount, uint_t flags) { i_ddi_caut_getput_ctlops(hp, (uintptr_t)host_addr, (uintptr_t)dev_addr, sizeof (uint32_t), repcount, flags, DDI_CTLOPS_PEEK); } void i_ddi_caut_rep_get64(ddi_acc_impl_t *hp, uint64_t *host_addr, uint64_t *dev_addr, size_t repcount, uint_t flags) { i_ddi_caut_getput_ctlops(hp, (uintptr_t)host_addr, (uintptr_t)dev_addr, sizeof (uint64_t), repcount, flags, DDI_CTLOPS_PEEK); } void i_ddi_caut_rep_put8(ddi_acc_impl_t *hp, uint8_t *host_addr, uint8_t *dev_addr, size_t repcount, uint_t flags) { i_ddi_caut_getput_ctlops(hp, (uintptr_t)host_addr, (uintptr_t)dev_addr, sizeof (uint8_t), repcount, flags, DDI_CTLOPS_POKE); } void i_ddi_caut_rep_put16(ddi_acc_impl_t *hp, uint16_t *host_addr, uint16_t *dev_addr, size_t repcount, uint_t flags) { i_ddi_caut_getput_ctlops(hp, (uintptr_t)host_addr, (uintptr_t)dev_addr, sizeof (uint16_t), repcount, flags, DDI_CTLOPS_POKE); } void i_ddi_caut_rep_put32(ddi_acc_impl_t *hp, uint32_t *host_addr, uint32_t *dev_addr, size_t repcount, uint_t flags) { i_ddi_caut_getput_ctlops(hp, (uintptr_t)host_addr, (uintptr_t)dev_addr, sizeof (uint32_t), repcount, flags, DDI_CTLOPS_POKE); } void i_ddi_caut_rep_put64(ddi_acc_impl_t *hp, uint64_t *host_addr, uint64_t *dev_addr, size_t repcount, uint_t flags) { i_ddi_caut_getput_ctlops(hp, (uintptr_t)host_addr, (uintptr_t)dev_addr, sizeof (uint64_t), repcount, flags, DDI_CTLOPS_POKE); } boolean_t i_ddi_copybuf_required(ddi_dma_attr_t *attrp) { uint64_t hi_pa; hi_pa = ((uint64_t)physmax + 1ull) << PAGESHIFT; if (attrp->dma_attr_addr_hi < hi_pa) { return (B_TRUE); } return (B_FALSE); } size_t i_ddi_copybuf_size() { return (dma_max_copybuf_size); } /* * i_ddi_dma_max() * returns the maximum DMA size which can be performed in a single DMA * window taking into account the devices DMA contraints (attrp), the * maximum copy buffer size (if applicable), and the worse case buffer * fragmentation. */ /*ARGSUSED*/ uint32_t i_ddi_dma_max(dev_info_t *dip, ddi_dma_attr_t *attrp) { uint64_t maxxfer; /* * take the min of maxxfer and the the worse case fragementation * (e.g. every cookie <= 1 page) */ maxxfer = MIN(attrp->dma_attr_maxxfer, ((uint64_t)(attrp->dma_attr_sgllen - 1) << PAGESHIFT)); /* * If the DMA engine can't reach all off memory, we also need to take * the max size of the copybuf into consideration. */ if (i_ddi_copybuf_required(attrp)) { maxxfer = MIN(i_ddi_copybuf_size(), maxxfer); } /* * we only return a 32-bit value. Make sure it's not -1. Round to a * page so it won't be mistaken for an error value during debug. */ if (maxxfer >= 0xFFFFFFFF) { maxxfer = 0xFFFFF000; } /* * make sure the value we return is a whole multiple of the * granlarity. */ if (attrp->dma_attr_granular > 1) { maxxfer = maxxfer - (maxxfer % attrp->dma_attr_granular); } return ((uint32_t)maxxfer); } /*ARGSUSED*/ void translate_devid(dev_info_t *dip) { } pfn_t i_ddi_paddr_to_pfn(paddr_t paddr) { pfn_t pfn; #ifdef __xpv if (DOMAIN_IS_INITDOMAIN(xen_info)) { pfn = xen_assign_pfn(mmu_btop(paddr)); } else { pfn = mmu_btop(paddr); } #else pfn = mmu_btop(paddr); #endif return (pfn); }