/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _SYS_USB_USBA_USBA_PRIVATE_H #define _SYS_USB_USBA_USBA_PRIVATE_H #include /* * Header file for items to be shared within usba but not to be used * by drivers */ #ifdef __cplusplus extern "C" { #endif /* * ************************************************************************** * DDK version 0.8 binaries are supported. * ************************************************************************** */ /* USBA supports (obsolete) legacy version 0.8 of the S8/S9 DDK. */ #define USBA_LEG_MAJOR_VER 0 #define USBA_LEG_MINOR_VER 8 /* * ************************************************************************** * Descriptor definitions and parsing functions. * ************************************************************************** */ /* * functions to return a pre-processed device descriptor to the client driver. * These all extract data from the raw config cloud returned by a * usb_get_raw_cfg_data() * * The pre-processed descriptor is returned into a buffer supplied by * the caller * The size of the buffer should allow for padding * * In the following: * buf buffer containing data returned by GET_DESCRIPTOR * buflen length of the data at buf * ret_descr buffer the data is to be returned in * ret_buf_len size of the buffer at ret_descr * * first_if the first interace associated with current iad * if_index the index in the array of concurrent interfaces * supported by this configuration * alt_if_setting alternate setting for the interface identified * by if_index * ep_index the index in the array of endpoints supported by * this configuration * * These functions return the length of the returned descriptor structure, * or USB_PARSE_ERROR on error. * * No error is returned if ret_buf_len is too small but * the data is truncated * This allows successful parsing of descriptors that have been * extended in a later rev of the spec. */ size_t usb_parse_dev_descr( uchar_t *buf, /* from GET_DESCRIPTOR(DEVICE) */ size_t buflen, usb_dev_descr_t *ret_descr, size_t ret_buf_len); size_t usb_parse_cfg_descr( uchar_t *buf, /* from GET_DESCRIPTOR(CONFIGURATION) */ size_t buflen, usb_cfg_descr_t *ret_descr, size_t ret_buf_len); size_t usb_parse_ia_descr( uchar_t *buf, /* from GET_DESCRIPTOR(CONFIGURATION) */ size_t buflen, size_t first_if, usb_ia_descr_t *ret_descr, size_t ret_buf_len); size_t usb_parse_if_descr( uchar_t *buf, /* from GET_DESCRIPTOR(CONFIGURATION) */ size_t buflen, uint_t if_index, uint_t alt_if_setting, usb_if_descr_t *ret_descr, size_t ret_buf_len); /* * the endpoint index is relative to the interface. index 0 is * the first endpoint */ size_t usb_parse_ep_descr( uchar_t *buf, /* from GET_DESCRIPTOR(CONFIGURATION) */ size_t buflen, uint_t if_index, uint_t alt_if_setting, uint_t ep_index, usb_ep_descr_t *ret_descr, size_t ret_buf_len); /* * functions to handle arbitrary descriptors. USBA doesn't know the format * and therefore cannot do any automatic pre-processing. * * In the following: * buf buffer containing data returned by GET_DESCRIPTOR * buflen length of the data at buf allowing for padding * fmt a null terminated string describing the format of * the data structure for general-purpose byte swapping, * use NULL for raw access. * The letters "c", "s", "l", and "L" * represent 1, 2, 4, and 8 byte quantities, * respectively. A descriptor that consists of a * short and two bytes would be described by "scc\0". * descr_type type of the desired descriptor, USB_DESCR_TYPE_ANY * to get any type. * descr_index index of the desired descriptor * ret_descr buffer the data is to be returned in * ret_buf_len size of the buffer at ret_descr * * Specifying descr_index=0 returns the first descriptor of the specified * type, specifying descr_index=1 returns the second, and so on. * * No error is returned if ret_buf_len is too small. This allows successful * parsing of descriptors that have been extended in a later rev of the spec. */ #define USB_DESCR_TYPE_ANY -1 /* Wild card */ size_t usb_parse_CV_cfg_descr( uchar_t *buf, /* from GET_DESCRIPTOR(CONFIGURATION) */ size_t buflen, char *fmt, uint_t descr_type, uint_t descr_index, void *ret_descr, size_t ret_buf_len); size_t usb_parse_CV_if_descr( uchar_t *buf, /* from GET_DESCRIPTOR(CONFIGURATION) */ size_t buflen, char *fmt, uint_t if_index, uint_t alt_if_setting, uint_t descr_type, uint_t descr_index, void *ret_descr, size_t ret_buf_len); size_t usb_parse_CV_ep_descr( uchar_t *buf, /* from GET_DESCRIPTOR(CONFIGURATION) */ size_t buflen, char *fmt, uint_t if_index, uint_t alt_if_setting, uint_t ep_index, uint_t descr_type, uint_t descr_index, void *ret_descr, size_t ret_buf_len); /* * for unpacking any kind of LE data */ size_t usb_parse_CV_descr( char *format, uchar_t *data, size_t datalen, void *structure, size_t structlen); /* * Returns pointer to the raw config cloud. The client should * not free this space. */ uchar_t *usb_get_raw_cfg_data( dev_info_t *dip, size_t *length); /* * Return pointer to device descriptor */ usb_dev_descr_t *usb_get_dev_descr( dev_info_t *dip); /* * ************************************************************************** * List entry functions and definitions * ************************************************************************** */ /* * Data structure for maintaining lists * This data structure private to USBA and not exposed to HCD or client * driver or hub driver */ typedef struct usba_list_entry { struct usba_list_entry *next; /* ptr to next element */ struct usba_list_entry *prev; /* ptr to previous element */ kmutex_t list_mutex; /* mutex that protects queue */ usb_opaque_t private; /* ptr to private data */ int count; /* for head of the list */ /* counts of entries */ } usba_list_entry_t; _NOTE(MUTEX_PROTECTS_DATA(usba_list_entry::list_mutex, usba_list_entry)) /* list entry functions. */ void usba_init_list(usba_list_entry_t *, usb_opaque_t, ddi_iblock_cookie_t); void usba_destroy_list(usba_list_entry_t *); void usba_add_to_list(usba_list_entry_t *, usba_list_entry_t *); int usba_rm_from_list(usba_list_entry_t *, usba_list_entry_t *); void usba_move_list(usba_list_entry_t *, usba_list_entry_t *, ddi_iblock_cookie_t); int usba_check_in_list(usba_list_entry_t *, usba_list_entry_t *); int usba_list_entry_leaks(usba_list_entry_t *, char *); int usba_list_entry_count(usba_list_entry_t *); usb_opaque_t usba_rm_first_pvt_from_list(usba_list_entry_t *); usba_list_entry_t *usba_rm_first_from_list(usba_list_entry_t *); /* * ************************************************************************** * Kernel interface definitions and functionality * ************************************************************************** */ /* * USBA private event definitions */ typedef enum usba_event { USBA_EVENT_TAG_HOT_REMOVAL = 0, USBA_EVENT_TAG_HOT_INSERTION = 1, USBA_EVENT_TAG_PRE_SUSPEND = 2, USBA_EVENT_TAG_POST_RESUME = 3, USBA_EVENT_TAG_CPR = -1 } usba_event_t; #define USBA_PRE_SUSPEND_EVENT "SUNW,USBA:USBA_PRE_SUSPEND" #define USBA_POST_RESUME_EVENT "SUNW,USBA:USBA_POST_RESUME" /* * Get dma attributes from HC. */ ddi_dma_attr_t *usba_get_hc_dma_attr(dev_info_t *dip); /* * This function calls ndi_devi_bind_driver() to bind the * driver to the device. If the call fails it reports an * error on the console. Attaching of the driver is done * later by devfs framework. */ int usba_bind_driver(dev_info_t *); /* check whether the dip owns an interface-associaiton */ boolean_t usba_owns_ia(dev_info_t *dip); /* * Driver binding functions */ dev_info_t *usba_ready_device_node(dev_info_t *); dev_info_t *usba_ready_interface_association_node(dev_info_t *, uint_t, uint_t *); dev_info_t *usba_ready_interface_node(dev_info_t *, uint_t); /* Some Nexus driver functions. */ /* * Common bus ctl for hcd, usb_mid and hubd. */ int usba_bus_ctl(dev_info_t *, dev_info_t *, ddi_ctl_enum_t, void *, void *); void usb_enable_parent_notification(dev_info_t *); /* * Some functions for setting/getting usba_device from dip. */ struct usba_device *usba_get_usba_device(dev_info_t *); struct usba_device *usba_polled_get_usba_device(dev_info_t *); void usba_set_usba_device(dev_info_t *, struct usba_device *); /* extract NDI event registration info */ struct usba_evdata *usba_get_evdata(dev_info_t *); /* * ************************************************************************** * Misc private USBA functions * ************************************************************************** */ /* * Get policy of a pipe while holding only opaque pipe handle. */ usb_pipe_policy_t *usba_pipe_get_policy(usb_pipe_handle_t); /* * Check interrupt context and or in USB_CB_INTR_CONTEXT to cb_flags as needed. */ usb_cb_flags_t usba_check_intr_context(usb_cb_flags_t); /* returns interface number, zero if driver owns the device */ uint8_t usba_get_ifno(dev_info_t *); /* * ************************************************************************** * Misc private descriptor definitions and functionality * ************************************************************************** */ /* default endpoint descriptor */ extern usb_ep_descr_t usba_default_ep_descr; /* * The compiler pads the above structures; the following represent the * unpadded, aggregate data sizes. */ #define USB_DEV_DESCR_SIZE 18 /* device descr size */ #define USB_CFG_DESCR_SIZE 9 /* configuration desc. size */ #define USBA_CFG_PWR_DESCR_SIZE 18 /* configuration pwr desc. size */ #define USB_IF_DESCR_SIZE 9 /* interface descr size */ #define USBA_IF_PWR_DESCR_SIZE 15 /* interface pwr descr size */ #define USB_EP_DESCR_SIZE 7 /* endpoint descr size */ #define USB_IA_DESCR_SIZE 8 /* interface association descr size */ /* * For compatibility with old code. */ #define USBA_DESCR_TYPE_CFG_PWR_1_1 0xfe #define USBA_DESCR_TYPE_IF_PWR_1_1 0xff /* * Configuration Power Descriptor * This reports the power consuption of the device core * for all types of USB devices. */ typedef struct usba_cfg_pwr_descr { uint8_t bLength; /* size of this descriptor 0x12 */ uint8_t bDescriptorType; /* config pwr descr 0x07 */ uint16_t SelfPowerConsumedD0_l; /* power consumed lower word */ uint8_t SelfPowerConsumedD0_h; /* power consumed upper byte */ uint8_t bPowerSummaryId; /* ID for own power devices */ uint8_t bBusPowerSavingD1; /* power saving in D1 */ uint8_t bSelfPowerSavingD1; /* power saving in D1 */ uint8_t bBusPowerSavingD2; /* power saving in D2 */ uint8_t bSelfPowerSavingD2; /* power saving in D2 */ uint8_t bBusPowerSavingD3; /* power saving in D3 */ uint8_t bSelfPowerSavingD3; /* power saving in D3 */ uint16_t TransitionTimeFromD1; /* D1 -> D0 transition time */ uint16_t TransitionTimeFromD2; /* D2 -> D0 transition time */ uint16_t TransitionTimeFromD3; /* D3 -> D0 transition time */ } usba_cfg_pwr_descr_t; /* * Interface Power Descriptor * This reports the power states implemented by the interface * and its wake-up capabilities. */ typedef struct usba_if_pwr_descr { uint8_t bLength; /* size of this descriptor 0x0F */ uint8_t bDescriptorType; /* i/f pwr descr 0x08 */ uint8_t bmCapabilitiesFlags; /* wakeup & pwr transition */ uint8_t bBusPowerSavingD1; /* power saving in D1 */ uint8_t bSelfPowerSavingD1; /* power saving in D1 */ uint8_t bBusPowerSavingD2; /* power saving in D2 */ uint8_t bSelfPowerSavingD2; /* power saving in D2 */ uint8_t bBusPowerSavingD3; /* power saving in D3 */ uint8_t bSelfPowerSavingD3; /* power saving in D3 */ uint16_t TransitionTimeFromD1; /* D1 -> D0 transition time */ uint16_t TransitionTimeFromD2; /* D2 -> D0 transition time */ uint16_t TransitionTimeFromD3; /* D3 -> D0 transition time */ } usba_if_pwr_descr_t; size_t usba_parse_cfg_pwr_descr(uchar_t *, size_t, usba_cfg_pwr_descr_t *, size_t); size_t usba_parse_if_pwr_descr(uchar_t *, size_t buflen, uint_t, uint_t, usba_if_pwr_descr_t *, size_t); /* * Returns (at ret_descr) a null-terminated string. Null termination is * guaranteed, even if the string is longer than the buffer. Thus, a * maximum of (ret_buf_len - 1) characters are returned. * * XXX is this needed when there is usb_get_string_descriptor * If so, then more comments about how it differs? */ size_t usba_ascii_string_descr(uchar_t *, size_t, char *, size_t); /* * usb common power management, for usb_mid, usb_ia and maybe other simple * drivers. */ typedef struct usb_common_power_struct { void *uc_usb_statep; /* points back to state structure */ uint8_t uc_wakeup_enabled; /* this is the bit mask of the power states that device has */ uint8_t uc_pwr_states; /* wakeup and power transition capabilites of an interface */ uint8_t uc_pm_capabilities; uint8_t uc_current_power; /* current power level */ } usb_common_power_t; /* warlock directives, stable data */ _NOTE(DATA_READABLE_WITHOUT_LOCK(usb_common_power_t::uc_usb_statep)) _NOTE(DATA_READABLE_WITHOUT_LOCK(usb_common_power_t::uc_wakeup_enabled)) _NOTE(DATA_READABLE_WITHOUT_LOCK(usb_common_power_t::uc_pwr_states)) _NOTE(DATA_READABLE_WITHOUT_LOCK(usb_common_power_t::uc_pm_capabilities)) _NOTE(DATA_READABLE_WITHOUT_LOCK(usb_common_power_t::uc_current_power)) /* power management */ int usba_common_power(dev_info_t *, uint8_t *, int *, int); /* * usb common events handler for usb_mid, usb_ia and maybe other nexus * drivers. */ void usba_common_register_events(dev_info_t *, uint_t, void (*)(dev_info_t *, ddi_eventcookie_t, void *, void *)); void usba_common_unregister_events(dev_info_t *, uint_t); #ifdef __cplusplus } #endif #endif /* _SYS_USB_USBA_USBA_PRIVATE_H */