/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _SYS_SCSI_GENERIC_COMMANDS_H #define _SYS_SCSI_GENERIC_COMMANDS_H #pragma ident "%Z%%M% %I% %E% SMI" #ifdef __cplusplus extern "C" { #endif /* * Standard SCSI Command Definitions * * Macros to determine known command sizes */ #define CDB_GROUPID(cmd) ((cmd >> 5) & 0x7) #define CDB_GROUPID_0 0 #define CDB_GROUPID_1 1 #define CDB_GROUPID_2 2 #define CDB_GROUPID_3 3 #define CDB_GROUPID_4 4 #define CDB_GROUPID_5 5 #define CDB_GROUPID_6 6 #define CDB_GROUPID_7 7 #define CDB_GROUP0 6 /* 6-byte cdb's */ #define CDB_GROUP1 10 /* 10-byte cdb's */ #define CDB_GROUP2 10 /* 10-byte cdb's */ #define CDB_GROUP3 0 /* reserved */ #define CDB_GROUP4 16 /* 16-byte cdb's */ #define CDB_GROUP5 12 /* 12-byte cdb's */ #define CDB_GROUP6 0 /* reserved */ #define CDB_GROUP7 0 /* reserved */ /* * Generic Command Definitions * NOTE: CDROM commands are defined in cdio.h */ /* * Group 0 Commands (CDB range 0x00 - 0x1F) */ #define SCMD_GROUP0 0x00 /* * Group 0 commands, All Devices */ #define SCMD_TEST_UNIT_READY 0x00 #define SCMD_REQUEST_SENSE 0x03 #define SCMD_INQUIRY 0x12 #define SCMD_COPY 0x18 #define SCMD_GDIAG 0x1C /* receive diagnostic results */ #define SCMD_SDIAG 0x1D /* send diagnostic results */ /* * Group 0 commands, Direct Access Devices */ /* SCMD_TEST_UNIT_READY 0x00 */ #define SCMD_REZERO_UNIT 0x01 /* SCMD_REQUEST_SENSE 0x03 */ #define SCMD_FORMAT 0x04 #define SCMD_REASSIGN_BLOCK 0x07 #define SCMD_READ 0x08 #define SCMD_WRITE 0x0a #define SCMD_SEEK 0x0b /* SCMD_INQUIRY 0x12 */ #define SCMD_MODE_SELECT 0x15 #define SCMD_RESERVE 0x16 #define SCMD_RELEASE 0x17 /* SCMD_COPY 0x18 */ #define SCMD_MODE_SENSE 0x1a #define SCMD_START_STOP 0x1b /* SCMD_GDIAG 0x1C */ /* SCMD_SDIAG 0x1D */ #define SCMD_DOORLOCK 0x1E /* Prevent/Allow Medium Removal */ /* * Group 0 commands, Sequential Access Devices */ /* SCMD_TEST_UNIT_READY 0x00 */ #define SCMD_REWIND 0x01 /* Note similarity to SCMD_REZERO */ /* SCMD_REQUEST_SENSE 0x03 */ #define SCMD_READ_BLKLIM 0x05 /* SCMD_READ 0x08 */ /* SCMD_WRITE 0x0a */ #define SCMD_TRK_SEL 0x0b /* Note similarity to SCMD_SEEK */ #define SCMD_READ_REVERSE 0x0f #define SCMD_WRITE_FILE_MARK 0x10 #define SCMD_SPACE 0x11 /* SCMD_INQUIRY 0x12 */ #define SCMD_VERIFY_G0 0x13 #define SCMD_RECOVER_BUF 0x14 /* SCMD_MODE_SELECT 0x15 */ /* SCMD_RESERVE 0x16 */ /* SCMD_RELEASE 0x17 */ /* SCMD_COPY 0x18 */ #define SCMD_ERASE 0x19 /* SCMD_MODE_SENSE 0x1a */ #define SCMD_LOAD 0x1b /* Note similarity to SCMD_START_STOP */ /* SCMD_GDIAG 0x1c */ /* SCMD_SDIAG 0x1d */ /* SCMD_DOORLOCK 0x1e */ /* * Group 0 commands, Printer Devices */ /* SCMD_TEST_UNIT_READY 0x00 */ /* SCMD_REQUEST_SENSE 0x03 */ /* SCMD_FORMAT 0x04 */ #define SCMD_PRINT 0x0a /* Note similarity to SCMD_WRITE */ #define SCMD_SLEW_PRINT 0x0b /* ? similar to SCMD_SEEK ? */ #define SCMD_FLUSH_PRINT_BUF 0x10 /* ? similar to SCMD_WRITE_FILE_MARK */ /* SCMD_INQUIRY 0x12 */ /* SCMD_RECOVER_BUF 0x14 */ /* SCMD_MODE_SELECT 0x15 */ /* SCMD_RESERVE 0x16 */ /* SCMD_RELEASE 0x17 */ /* SCMD_COPY 0x18 */ /* SCMD_MODE_SENSE 0x1a */ #define SCMD_STOP_PRINT 0x1b /* Note similarity to SCMD_START_STOP */ /* SCMD_GDIAG 0x1c */ /* SCMD_SDIAG 0x1d */ /* * Group 0 commands, Processor Devices */ /* SCMD_TEST_UNIT_READY 0x00 */ /* SCMD_REQUEST_SENSE 0x03 */ #define SCMD_RECEIVE 0x08 /* Note similarity to SCMD_READ */ #define SCMD_SEND 0x0a /* Note similarity to SCMD_WRITE */ /* SCMD_INQUIRY 0x12 */ /* SCMD_COPY 0x18 */ /* SCMD_MODE_SENSE 0x1a */ /* SCMD_GDIAG 0x1c */ /* SCMD_SDIAG 0x1d */ /* * Group 0 commands, WORM Devices */ /* SCMD_TEST_UNIT_READY 0x00 */ /* SCMD_REZERO_UNIT 0x01 */ /* SCMD_REQUEST_SENSE 0x03 */ /* SCMD_REASSIGN_BLOCK 0x07 */ /* SCMD_READ 0x08 */ /* SCMD_WRITE 0x0a */ /* SCMD_SEEK 0x0b */ /* SCMD_INQUIRY 0x12 */ /* SCMD_MODE_SELECT 0x15 */ /* SCMD_RESERVE 0x16 */ /* SCMD_RELEASE 0x17 */ /* SCMD_COPY 0x18 */ /* SCMD_MODE_SENSE 0x1a */ /* SCMD_START_STOP 0x1b */ /* SCMD_GDIAG 0x1C */ /* SCMD_SDIAG 0x1D */ /* SCMD_DOORLOCK 0x1E */ /* * Group 0 commands, Read Only Devices */ /* SCMD_TEST_UNIT_READY 0x00 */ /* SCMD_REZERO_UNIT 0x01 */ /* SCMD_REQUEST_SENSE 0x03 */ /* SCMD_REASSIGN_BLOCK 0x07 */ /* SCMD_READ 0x08 */ /* SCMD_SEEK 0x0b */ /* SCMD_INQUIRY 0x12 */ /* SCMD_MODE_SELECT 0x15 */ /* SCMD_RESERVE 0x16 */ /* SCMD_RELEASE 0x17 */ /* SCMD_COPY 0x18 */ /* SCMD_MODE_SENSE 0x1a */ /* SCMD_START_STOP 0x1b */ /* SCMD_GDIAG 0x1C */ /* SCMD_SDIAG 0x1D */ /* SCMD_DOORLOCK 0x1E */ /* * Group 1 Commands (CDB range 0x20 - 0x3F) */ #define SCMD_GROUP1 0x20 /* * Group 1 Commands, All Devices */ #define SCMD_COMPARE 0x39 #define SCMD_COPY_VERIFY 0x3A #define SCMD_PERSISTENT_RESERVE_IN 0x5E #define SCMD_PERSISTENT_RESERVE_OUT 0x5F #define SCMD_PRIN SCMD_PERSISTENT_RESERVE_IN #define SCMD_PROUT SCMD_PERSISTENT_RESERVE_OUT /* * Group 1 Commands, Direct Access Devices */ #define SCMD_READ_FORMAT_CAP 0x23 #define SCMD_READ_CAPACITY 0x25 #define SCMD_READ_G1 0x28 /* Note that only the group changed */ #define SCMD_WRITE_G1 0x2a /* Note that only the group changed */ #define SCMD_SEEK_G1 0x2b /* Note that only the group changed */ #define SCMD_WRITE_VERIFY 0x2e #define SCMD_VERIFY 0x2f #define SCMD_SEARCH_HIGH 0x30 #define SCMD_SEARCH_EQUAL 0x31 #define SCMD_SEARCH_LOW 0x32 #define SCMD_SET_LIMITS 0x33 #define SCMD_SYNCHRONIZE_CACHE 0x35 #define SCMD_READ_DEFECT_LIST 0x37 #define SCMD_WRITE_BUFFER 0x3B #define SCMD_READ_BUFFER 0x3c #define SCMD_READ_LONG 0x3E #define SCMD_WRITE_LONG 0x3F #define SCMD_RESERVE_G1 0x56 #define SCMD_RELEASE_G1 0x57 #define SCMD_MODE_SELECT_G1 0x55 #define SCMD_MODE_SENSE_G1 0x5A #define SCMD_GET_CONFIGURATION 0x46 #define SCMD_LOG_SELECT_G1 0x4C #define SCMD_LOG_SENSE_G1 0x4d /* * Group 1 Commands, Sequential Access Devices */ #define SCMD_LOCATE 0x2B /* Note similarity to SCMD_SEEK_G1 */ #define SCMD_READ_POSITION 0x34 #define SCMD_REPORT_DENSITIES 0x44 /* * Group 1 Commands, Printer Devices */ /* (None Defined) */ /* * Group 1 Commands, Processor Devices */ /* (None Defined) */ /* * Group 1 Commands, WORM Devices */ /* SCMD_READ_CAPACITY 0x25 */ /* SCMD_READ_G1 0x28 */ /* SCMD_WRITE_G1 0x2a */ /* SCMD_SEEK_G1 0x2b */ /* SCMD_WRITE_VERIFY 0x2e */ /* SCMD_VERIFY 0x2f */ /* SCMD_SEARCH_HIGH 0x30 */ /* SCMD_SEARCH_EQUAL 0x31 */ /* SCMD_SEARCH_LOW 0x32 */ /* SCMD_SET_LIMITS 0x33 */ /* * Group 1 Commands, Read Only Devices */ /* SCMD_READ_CAPACITY 0x25 */ /* SCMD_READ_G1 0x28 */ /* SCMD_SEEK_G1 0x2b */ /* SCMD_VERIFY 0x2f */ /* SCMD_SEARCH_HIGH 0x30 */ /* SCMD_SEARCH_EQUAL 0x31 */ /* SCMD_SEARCH_LOW 0x32 */ /* SCMD_SET_LIMITS 0x33 */ /* * Group 3 Commands */ #define SCMD_VAR_LEN 0x7f /* * Group 4 Commands, All Devices */ #define SCMD_GROUP4 0x80 #define SCMD_EXTENDED_COPY 0x83 /* * Group 4 Commands, Direct Access Devices */ #define SCMD_READ_G4 0x88 #define SCMD_WRITE_G4 0x8a #define SCMD_SVC_ACTION_IN_G4 0x9e #define SCMD_SVC_ACTION_OUT_G4 0x9f /* * Group 4 Service Actions for Service Action In (16) */ #define SSVC_ACTION_READ_CAPACITY_G4 0x10 #define SSVC_ACTION_READ_LONG_G4 0x11 /* * Group 4 Service Actions for Service Action Out (16) */ #define SSVC_ACTION_WRITE_LONG_G4 0x11 /* * Define for Group 5 command. */ #define SCMD_GROUP5 0xA0 #define SCMD_REPORT_LUNS 0xA0 #define SCMD_REPORT_TARGET_PORT_GROUPS 0xA3 #define SCMD_READ_G5 0xA8 #define SCMD_WRITE_G5 0xAA #define SCMD_READ_MEDIA_SERIAL 0xAB #define SCMD_GET_PERFORMANCE 0xAC /* * scsi_key_strings for SCMD_ definitions * NOTE: see SCSI_CMDS_KEY_STRINGS_CDIO in cdio.h for additional * command-to-string translations. */ #define SCSI_CMDS_KEY_STRINGS \ /* 0x00 */ SCMD_TEST_UNIT_READY, "test_unit_ready", \ /* 0x01 */ SCMD_REWIND | \ SCMD_REZERO_UNIT, "rezero/rewind", \ /* 0x03 */ SCMD_REQUEST_SENSE, "request_sense", \ /* 0x04 */ SCMD_FORMAT, "format", \ /* 0x05 */ SCMD_READ_BLKLIM, "read_block_limits", \ /* 0x07 */ SCMD_REASSIGN_BLOCK, "reassign", \ /* 0x08 */ SCMD_READ | \ SCMD_RECEIVE, "read", \ /* 0x0a */ SCMD_PRINT | \ SCMD_SEND | \ SCMD_WRITE, "write", \ /* 0x0b */ SCMD_SEEK | \ SCMD_SLEW_PRINT | \ SCMD_TRK_SEL, "seek", \ /* 0x0f */ SCMD_READ_REVERSE, "read_reverse", \ /* 0x10 */ SCMD_WRITE_FILE_MARK | \ SCMD_FLUSH_PRINT_BUF, "write_file_mark", \ /* 0x11 */ SCMD_SPACE, "space", \ /* 0x12 */ SCMD_INQUIRY, "inquiry", \ /* 0x13 */ SCMD_VERIFY_G0, "verify", \ /* 0x14 */ SCMD_RECOVER_BUF, "recover_buffer_data", \ /* 0x15 */ SCMD_MODE_SELECT, "mode_select", \ /* 0x16 */ SCMD_RESERVE, "reserve", \ /* 0x17 */ SCMD_RELEASE, "release", \ /* 0x18 */ SCMD_COPY, "copy", \ /* 0x19 */ SCMD_ERASE, "erase_tape", \ /* 0x1a */ SCMD_MODE_SENSE, "mode_sense", \ /* 0x1b */ SCMD_LOAD | \ SCMD_START_STOP | \ SCMD_STOP_PRINT, "load/start/stop", \ /* 0x1c */ SCMD_GDIAG, "get_diagnostic_results", \ /* 0x1d */ SCMD_SDIAG, "send_diagnostic_command", \ /* 0x1e */ SCMD_DOORLOCK, "door_lock", \ /* 0x23 */ SCMD_READ_FORMAT_CAP, "read_format_capacity", \ /* 0x25 */ SCMD_READ_CAPACITY, "read_capacity", \ /* 0x28 */ SCMD_READ_G1, "read(10)", \ /* 0x2a */ SCMD_WRITE_G1, "write(10)", \ /* 0x2b */ SCMD_SEEK_G1 | \ SCMD_LOCATE, "seek(10)", \ /* 0x2e */ SCMD_WRITE_VERIFY, "write_verify", \ /* 0x2f */ SCMD_VERIFY, "verify(10)", \ /* 0x30 */ SCMD_SEARCH_HIGH, "search_data_high", \ /* 0x31 */ SCMD_SEARCH_EQUAL, "search_data_equal", \ /* 0x32 */ SCMD_SEARCH_LOW, "search_data_low", \ /* 0x33 */ SCMD_SET_LIMITS, "set_limits", \ /* 0x34 */ SCMD_READ_POSITION, "read_position", \ /* 0x35 */ SCMD_SYNCHRONIZE_CACHE, "synchronize_cache", \ /* 0x37 */ SCMD_READ_DEFECT_LIST, "read_defect_data", \ /* 0x39 */ SCMD_COMPARE, "compare", \ /* 0x3a */ SCMD_COPY_VERIFY, "copy_verify", \ /* 0x3b */ SCMD_WRITE_BUFFER, "write_buffer", \ /* 0x3c */ SCMD_READ_BUFFER, "read_buffer", \ /* 0x3e */ SCMD_READ_LONG, "read_long", \ /* 0x3f */ SCMD_WRITE_LONG, "write_long", \ /* 0x44 */ SCMD_REPORT_DENSITIES | \ /* SCMD_READ_HEADER (from cdio.h) | */ \ 0, "report_densities/read_header", \ /* 0x4c */ SCMD_LOG_SELECT_G1, "log_select", \ /* 0x4d */ SCMD_LOG_SENSE_G1, "log_sense", \ /* 0x55 */ SCMD_MODE_SELECT_G1, "mode_select(10)", \ /* 0x56 */ SCMD_RESERVE_G1, "reserve(10)", \ /* 0x57 */ SCMD_RELEASE_G1, "release(10)", \ /* 0x5a */ SCMD_MODE_SENSE_G1, "mode_sense(10)", \ /* 0x5e */ SCMD_PERSISTENT_RESERVE_IN, "persistent_reserve_in", \ /* 0x5f */ SCMD_PERSISTENT_RESERVE_OUT, "persistent_reserve_out", \ /* 0x83 */ SCMD_EXTENDED_COPY, "extended_copy", \ /* 0x88 */ SCMD_READ_G4, "read(16)", \ /* 0x8a */ SCMD_WRITE_G4, "write(16)", \ /* 0xa0 */ SCMD_REPORT_LUNS, "report_luns", \ /* 0xa8 */ SCMD_READ_G5, "read(12)", \ /* 0xaa */ SCMD_WRITE_G5, "write(12)", \ /* 0xac */ SCMD_GET_PERFORMANCE, "get_performance" \ /* see cdio.h for additional command-to-string translations */ /* XXX not a command code, does not belong here */ #define ATAPI_CAPABILITIES 0x2A #ifdef __cplusplus } #endif /* * Below are inclusions of files describing various command structures * of interest. */ #include #include /* * Private Vendor Unique Commands - Each implementation provides this. */ #include #endif /* _SYS_SCSI_GENERIC_COMMANDS_H */