/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, Version 1.0 only * (the "License"). You may not use this file except in compliance * with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2005 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _SYS_IB_IBTL_IBTI_COMMON_H #define _SYS_IB_IBTL_IBTI_COMMON_H #pragma ident "%Z%%M% %I% %E% SMI" /* * ibti_common.h * * This file contains the shared/common transport data types and function * prototypes. */ #include #include #include #include #ifdef __cplusplus extern "C" { #endif /* * Endian Macros * h2b - host endian to big endian protocol * b2h - big endian protocol to host endian * h2l - host endian to little endian protocol * l2h - little endian protocol to host endian */ #if defined(_LITTLE_ENDIAN) #define h2b16(x) (htons(x)) #define h2b32(x) (htonl(x)) #define h2b64(x) (ddi_swap64(x)) #define b2h16(x) (ntohs(x)) #define b2h32(x) (ntohl(x)) #define b2h64(x) (ddi_swap64(x)) #define h2l16(x) (x) #define h2l32(x) (x) #define h2l64(x) (x) #define l2h16(x) (x) #define l2h32(x) (x) #define l2h64(x) (x) #elif defined(_BIG_ENDIAN) #define h2b16(x) (x) #define h2b32(x) (x) #define h2b64(x) (x) #define b2h16(x) (x) #define b2h32(x) (x) #define b2h64(x) (x) #define h2l16(x) (ddi_swap16(x)) #define h2l32(x) (ddi_swap32(x)) #define h2l64(x) (ddi_swap64(x)) #define l2h16(x) (ddi_swap16(x)) #define l2h32(x) (ddi_swap32(x)) #define l2h64(x) (ddi_swap64(x)) #else #error "what endian is this machine?" #endif /* * Max number of paths that can be requested in an ibt_get_paths() call, * if IBT_PATH_PERF or IBT_PATH_AVAIL flag (ibt_path_flags_t) is set. */ #define IBT_MAX_SPECIAL_PATHS 2 /* * The name of DDI Event, generated when the properties of IOC device * node properties were modified. */ #define IB_PROP_UPDATE_EVENT "SUNW,IB:IB_PROP_UPDATE" /* Transport Interface version */ typedef enum ibt_version_e { IBTI_V1 = 1, IBTI_V2 = 2 /* FMR Support */ } ibt_version_t; /* * Driver class type. Identifies a type of client driver so that * "IBTF Policy" decisions can be made on a driver class basis. * The last class should always be IBT_CLNT_NUM, and any new classes added * must be defined before IBT_CLNT_NUM. The class values must be above 0. * Any class values below or equal to 0 shall be invalid */ typedef enum ibt_clnt_class_e { IBT_STORAGE_DEV = 0x1, /* SCSI, FC, etc.. */ IBT_NETWORK_DEV, /* Network driver with associated client H/W */ IBT_GENERIC_DEV, /* Generic client H/W device driver */ IBT_NETWORK, /* Network driver with no associated */ /* client H/W, e.g., IPoIB */ IBT_GENERIC, /* A generic IB driver not */ /* associated with client H/W */ IBT_USER, /* A user application IBT interface driver */ IBT_IBMA, /* The IBMA Module */ IBT_CM, /* The CM Module */ IBT_DM, /* The DM Module */ IBT_CLASS_NUM /* Place holder for class count */ } ibt_clnt_class_t; #define IBT_TEST_DEV 999 /* Place holder for modules that test IBTL */ #define IBT_CLNT_DEVICE_CLASS(class) ((class) == IBT_STORAGE_DEV || \ (class) == IBT_NETWORK_DEV || \ (class) == IBT_GENERIC_DEV) #define IBT_CLNT_GENERAL_CLASS(class) ((class) == IBT_NETWORK || \ (class) == IBT_GENERIC || \ (class) == IBT_USER) #define IBT_CLNT_MGMT_CLASS(class) ((class) == IBT_IBMA || \ (class) == IBT_CM || \ (class) == IBT_DM || \ (class) == IBT_TEST_DEV) /* * Event record & status returns for asynchronous events and errors. */ typedef struct ibt_async_event_s { uint64_t ev_fma_ena; /* FMA Error data */ ibt_channel_hdl_t ev_chan_hdl; /* Channel handle */ ibt_cq_hdl_t ev_cq_hdl; /* CQ handle */ ib_guid_t ev_hca_guid; /* HCA node GUID */ uint8_t ev_port; /* HCA port */ ibt_srq_hdl_t ev_srq_hdl; /* SRQ handle */ } ibt_async_event_t; /* * IBT Client Callback function typedefs. * * ibt_async_handler_t * Pointer to an async event/error handler function. This function is * called when an async event/error is detected on a HCA that is being * used by the IBT client driver that registered the function. */ typedef void (*ibt_async_handler_t)(void *clnt_private, ibt_hca_hdl_t hca_hdl, ibt_async_code_t code, ibt_async_event_t *event); /* * IBT Client Memory Error Callback function typedefs. * * ibt_memory_handler_t * Pointer to an memory event/error handler function. */ typedef void (*ibt_memory_handler_t)(void *clnt_private, ibt_hca_hdl_t hca_hdl, ibt_mem_code_t code, ibt_mem_data_t *data); /* * Define a client module information structure. All clients MUST * define a global of type ibt_clnt_modinfo_t. A pointer to this global * is passed into the IBTF by a client when calling ibt_attach(). * This struct must persist during the life of the client. * * The client's mi_async_handler is called when an async event/error is * detected on a HCA that is being used by this client. */ typedef struct ibt_clnt_modinfo_s { ibt_version_t mi_ibt_version; /* TI version */ ibt_clnt_class_t mi_clnt_class; /* Type of client */ ibt_async_handler_t mi_async_handler; /* Async Handler */ ibt_memory_handler_t mi_reserved; /* Memory handler */ char *mi_clnt_name; /* Client Name. */ } ibt_clnt_modinfo_t; /* * Definitions for use with ibt_register_subnet_notices() */ typedef enum ibt_subnet_event_code_e { IBT_SM_EVENT_MCG_CREATED = 1, IBT_SM_EVENT_MCG_DELETED = 2, IBT_SM_EVENT_AVAILABLE = 3, IBT_SM_EVENT_UNAVAILABLE = 4, IBT_SM_EVENT_GID_AVAIL = 5, IBT_SM_EVENT_GID_UNAVAIL = 6 } ibt_subnet_event_code_t; typedef struct ibt_subnet_event_s { ib_gid_t sm_notice_gid; } ibt_subnet_event_t; typedef void (*ibt_sm_notice_handler_t)(void *private, ib_gid_t gid, ibt_subnet_event_code_t code, ibt_subnet_event_t *event); /* * MTU Request type. */ typedef struct ibt_mtu_req_s { ib_mtu_t r_mtu; /* Requested MTU */ ibt_selector_t r_selector; /* Qualifier for r_mtu */ } ibt_mtu_req_t; /* * Qflags, used by ibt_resize_queues(). */ typedef enum ibt_qflags_e { IBT_SEND_Q = 1 << 0, /* Op applies to the Send Q */ IBT_RECV_Q = 1 << 1 /* Op applies to the Recv Q */ } ibt_qflags_t; /* * CQ priorities * The IBTF will attempt to implement a coarse 3 level priority scheme * (IBT_CQ_LOW, IBT_CQ_MEDIUM, IBT_CQ_HIGH) based on the class of client * driver. The requested priority is not guaranteed. If a CI implementation * has the ability to implement priority CQs, then the IBTF will take advantage * of that when calling the CI to create a CQ by passing a priority indicator * to the CI. */ typedef enum ibt_cq_priority_e { IBT_CQ_DEFAULT = 0x0, IBT_CQ_LOW = 0x1, IBT_CQ_MEDIUM = 0x2, IBT_CQ_HIGH = 0x3, IBT_CQ_OPAQUE_1 = 0x4, IBT_CQ_OPAQUE_2 = 0x5, IBT_CQ_OPAQUE_3 = 0x6, IBT_CQ_OPAQUE_4 = 0x7, IBT_CQ_OPAQUE_5 = 0x8, IBT_CQ_OPAQUE_6 = 0x9, IBT_CQ_OPAQUE_7 = 0xA, IBT_CQ_OPAQUE_8 = 0xB, IBT_CQ_OPAQUE_9 = 0xC, IBT_CQ_OPAQUE_10 = 0xD, IBT_CQ_OPAQUE_11 = 0xE, IBT_CQ_OPAQUE_12 = 0xF, IBT_CQ_OPAQUE_13 = 0x10, IBT_CQ_OPAQUE_14 = 0x11, IBT_CQ_OPAQUE_15 = 0x12, IBT_CQ_OPAQUE_16 = 0x13 } ibt_cq_priority_t; /* * Attributes when creating a Completion Queue Scheduling Handle. */ typedef struct ibt_cq_sched_attr_s { ibt_cq_sched_flags_t cqs_flags; ibt_cq_priority_t cqs_priority; uint_t cqs_load; ibt_sched_hdl_t cqs_affinity_hdl; } ibt_cq_sched_attr_t; /* * ibt_cq_handler_t * Pointer to a work request completion handler function. This function * is called when a WR completes on a CQ that is being used by the IBTF * client driver that registered the function. */ typedef void (*ibt_cq_handler_t)(ibt_cq_hdl_t ibt_cq, void *arg); /* * Service Data and flags. * (IBTA Spec Release 1.1, Vol-1 Ref: 15.2.5.14.4) * * The ServiceData8.1 (sb_data8[0]) through ServiceData64.2 (sb_data64[1]) * components together constitutes a 64-byte area in which any data may be * placed. It is intended to be a convenient way for a service to provide its * clients with some initial data. * * In addition, this 64-byte area is formally divided into a total of 30 * components, 16 8-bit (uint8_t) components, then 8 16-bit (uint16_t) * components, then 6 32-bit (uint32_t) components, then 2 64-bit (uint64_t) * components, thereby assigning ComponentMask bits (ibt_srv_data_flags_t) to * variously-sized segments of the data. All data are in host endian format. * This allows query operations (ibt_get_paths()) to be used which match * parts of the Service Data, making it possible, for example, for * service-specific parts of the ServiceData to serve as a binary-coded * extension to the ServiceName for purposes of lookup. */ typedef enum ibt_srv_data_flags_e { IBT_NO_SDATA = 0, IBT_SDATA8_0 = (1 << 0), IBT_SDATA8_1 = (1 << 1), IBT_SDATA8_2 = (1 << 2), IBT_SDATA8_3 = (1 << 3), IBT_SDATA8_4 = (1 << 4), IBT_SDATA8_5 = (1 << 5), IBT_SDATA8_6 = (1 << 6), IBT_SDATA8_7 = (1 << 7), IBT_SDATA8_8 = (1 << 8), IBT_SDATA8_9 = (1 << 9), IBT_SDATA8_10 = (1 << 10), IBT_SDATA8_11 = (1 << 11), IBT_SDATA8_12 = (1 << 12), IBT_SDATA8_13 = (1 << 13), IBT_SDATA8_14 = (1 << 14), IBT_SDATA8_15 = (1 << 15), IBT_SDATA16_0 = (1 << 16), IBT_SDATA16_1 = (1 << 17), IBT_SDATA16_2 = (1 << 18), IBT_SDATA16_3 = (1 << 19), IBT_SDATA16_4 = (1 << 20), IBT_SDATA16_5 = (1 << 21), IBT_SDATA16_6 = (1 << 22), IBT_SDATA16_7 = (1 << 23), IBT_SDATA32_0 = (1 << 24), IBT_SDATA32_1 = (1 << 25), IBT_SDATA32_2 = (1 << 26), IBT_SDATA32_3 = (1 << 27), IBT_SDATA64_0 = (1 << 28), IBT_SDATA64_1 = (1 << 29), IBT_SDATA_ALL = 0x3FFFFFFF } ibt_srv_data_flags_t; typedef struct ibt_srv_data_s { uint8_t s_data8[16]; /* 8-bit service data fields. */ uint16_t s_data16[8]; /* 16-bit service data fields. */ uint32_t s_data32[4]; /* 32-bit service data fields. */ uint64_t s_data64[2]; /* 64-bit service data fields. */ } ibt_srv_data_t; /* * Path flags, used in ibt_get_paths() */ typedef enum ibt_path_flags_e { IBT_PATH_NO_FLAGS = 0, IBT_PATH_APM = 1 << 0, /* APM is desired. */ IBT_PATH_AVAIL = 1 << 2, IBT_PATH_PERF = 1 << 3, IBT_PATH_MULTI_SVC_DEST = 1 << 4, /* Multiple ServiceRecords */ IBT_PATH_HOP = 1 << 5, /* pa_hop is specified. */ IBT_PATH_PKEY = 1 << 6 /* pa_pkey is specified. */ } ibt_path_flags_t; /* * Path attributes. * * The ibt_path_attr_t structure is used to specify required attributes in a * path from the requesting (source) node to a specified destination node. * Attributes that are don't care should be set to NULL or '0'. * A destination must be specified, where a destination can be defined as * one of the following: * * o Service Name * o Service ID (SID) * o Array of DGIDs. * o Service Name and Array of DGIDs. */ typedef struct ibt_path_attr_s { ib_gid_t *pa_dgids; /* Array of DGIDs */ ib_gid_t pa_sgid; ib_guid_t pa_hca_guid; char *pa_sname; /* ASCII Service name */ /* NULL Terminated */ ib_svc_id_t pa_sid; /* Service ID */ ibt_srv_data_flags_t pa_sd_flags; /* Service Data flags. */ ibt_srv_data_t pa_sdata; /* Service Data */ uint8_t pa_hca_port_num; uint8_t pa_num_dgids; /* size of pa_dgids array */ uint8_t pa_sl:4; ibt_mtu_req_t pa_mtu; ibt_srate_req_t pa_srate; ibt_pkt_lt_req_t pa_pkt_lt; /* Packet Life Time Request */ uint_t pa_flow:20; uint8_t pa_hop; /* IBT_PATH_HOP */ uint8_t pa_tclass; ib_pkey_t pa_pkey; /* IBT_PATH_PKEY */ } ibt_path_attr_t; /* * Path Information. * * The ibt_get_paths() performs SA Path record lookups to select a path(s) to * a given destination(s), details of selected path(s) are returned in this * structure. * * The ibt_path_info_t contains all the attributes of the best path(s), as * as determined by IBTL, to the specified destination(s), including the * local HCA and HCA port to use to access the fabric. * * The Service ID (pi_sid) and Service Data (pi_sdata) are returned only for * lookups based on Service ID or/and Service Name. */ typedef struct ibt_path_info_s { ib_guid_t pi_hca_guid; /* Local HCA GUID; 0 implies */ /* this record is invalid */ ib_svc_id_t pi_sid; /* Service ID */ ibt_srv_data_t pi_sdata; /* Service Data */ ibt_cep_path_t pi_prim_cep_path; /* Contains CEP adds info */ ibt_cep_path_t pi_alt_cep_path; /* RC & UC Only, valid if */ /* cep_hca_port_num is not */ /* '0' */ ib_mtu_t pi_path_mtu; /* Common path MTU */ ib_time_t pi_prim_pkt_lt; ib_time_t pi_alt_pkt_lt; } ibt_path_info_t; /* * Optional Alternate Path attributes. * * The ibt_alt_path_attr_t structure is used to specify additional optional * attributes when requesting an alternate path for an existing channel. * * Attributes that are don't care should be set to NULL or '0'. */ typedef struct ibt_alt_path_attr_s { ib_gid_t apa_sgid; ib_gid_t apa_dgid; ibt_srate_req_t apa_srate; ibt_pkt_lt_req_t apa_pkt_lt; /* Packet Life Time Request */ uint_t apa_flow:20; uint8_t apa_sl:4; uint8_t apa_hop; uint8_t apa_tclass; } ibt_alt_path_attr_t; /* * Path Information for Alternate Path - input to ibt_set_alt_path(). */ typedef struct ibt_alt_path_info_s { ibt_cep_path_t ap_alt_cep_path; /* RC & UC Only, valid if */ /* cep_hca_port_num is not */ /* '0' */ ib_time_t ap_alt_pkt_lt; } ibt_alt_path_info_t; /* * Open Channel flags, Used in ibt_open_rc_channel call */ typedef enum ibt_chan_open_flags_e { IBT_OCHAN_NO_FLAGS = 0, IBT_OCHAN_REDIRECTED = 1 << 0, IBT_OCHAN_PORT_REDIRECTED = 1 << 1, IBT_OCHAN_DUP = 1 << 2, IBT_OCHAN_PORT_FIXED = 1 << 3, IBT_OCHAN_OPAQUE1 = 1 << 4, IBT_OCHAN_OPAQUE2 = 1 << 5, IBT_OCHAN_OPAQUE3 = 1 << 6, IBT_OCHAN_OPAQUE4 = 1 << 7, IBT_OCHAN_OPAQUE5 = 1 << 8 } ibt_chan_open_flags_t; /* * Arguments for ibt_open_rc_channel(). * * oc_priv_data should be NULL or point to a buffer allocated by the caller, * the size of which should be in oc_priv_data_len, where oc_priv_data_len <= * IBT_REQ_PRIV_DATA_SZ. * * When ibt_open_rc_channel returns with ibt_cm_reason_t of * IBT_CM_REDIRECT_PORT, the client can re-issue ibt_open_rc_channel setting * new fields as follows: * * Set (ibt_chan_args_t)->oc_cm_cep_path = * original (ibt_chan_open_args_t)->oc_path->pi_prim_cep_path. * Set (ibt_chan_args_t)->oc_cm_pkt_lt = * original (ibt_chan_open_args_t)->oc_prim_pkt_lt. * Update (ibt_chan_args_t)->oc_path based on path information returned * from ibt_get_paths using the gid in the return data below: * (ibt_rc_returns_t)->rc_arej_info.ari_redirect_info.ari_gid. * Set flags to IBT_OCHAN_PORT_REDIRECTED. * * Note : oc_cm_path is not used for any other scenario, and must be set for * IBT_OCHAN_PORT_REDIRECTED. * * When ibt_open_rc_channel returns with ibt_cm_reason_t of * IBT_CM_REDIRECT_CM, the client can re-issue ibt_open_rc_channel setting * new fields as follows: * * Update (ibt_chan_args_t)->oc_path based on path information returned * from ibt_get_paths using the return data in * (ibt_rc_returns_t)->rc_arej_info.ari_redirect_info. * * Set (ibt_chan_args_t)->oc_cm_redirect_info = * Returned (ibt_rc_returns_t)->rc_arej_info.ari_redirect_info. * Set flags to IBT_OCHAN_REDIRECTED. * * Note: * * IBT_OCHAN_PORT_REDIRECTED flag cannot be used to specify a remote CM MAD * address, that is on a different subnet than the RC connection itself. * * Not specified attributes should be set to "NULL" or "0". */ typedef struct ibt_chan_open_args_s { ibt_path_info_t *oc_path; /* Primary & Alternate */ ibt_cm_handler_t oc_cm_handler; /* cm_handler - required */ void *oc_cm_clnt_private; /* First argument to */ /* cm_handler */ ibt_rnr_retry_cnt_t oc_path_rnr_retry_cnt; uint8_t oc_path_retry_cnt:3; uint8_t oc_rdma_ra_out; uint8_t oc_rdma_ra_in; ibt_priv_data_len_t oc_priv_data_len; /* Number of bytes of */ /* REQ Private data */ void *oc_priv_data; /* REQ private data */ ibt_channel_hdl_t oc_dup_channel; /* IBT_OCHAN_DUP */ ibt_redirect_info_t *oc_cm_redirect_info; /* Redirect params */ /* for port and CM */ /* redirection */ ibt_cep_path_t *oc_cm_cep_path; /* Optional Path for */ /* CM MADs on */ /* port redirection */ ib_time_t oc_cm_pkt_lt; /* Pkt life time for */ /* CM MADs */ uint32_t oc_opaque1:4; uint32_t oc_opaque2:24; uint32_t oc_opaque3; uint32_t oc_opaque4; } ibt_chan_open_args_t; /* * Define an optional RC return arguments structure. This contains return * parameters from ibt_open_rc_channel() when called in BLOCKING mode. * * rc_priv_data should be NULL or point to a buffer allocated by the caller, * the size of which should be in rc_priv_data_len, where rc_priv_data_len <= * IBT_REP_PRIV_DATA_SZ. */ typedef struct ibt_rc_returns_s { uint8_t rc_rdma_ra_in; /* Arbitrated resp resources */ uint8_t rc_rdma_ra_out; /* Arbitrated initiator depth */ ibt_arej_info_t rc_arej_info; ibt_cm_reason_t rc_status; uint8_t rc_failover_status; /* Failover status */ ibt_priv_data_len_t rc_priv_data_len; void *rc_priv_data; } ibt_rc_returns_t; /* * Define a callback function that can be used in Non-Blocking calls to * ibt_recycle_rc(). */ typedef void (*ibt_recycle_handler_t)(ibt_status_t ibt_status, void *arg); /* * Define an optional return arguments structure from ibt_set_alt_path() * This contains return parameters, when called in BLOCKING mode. * * ap_priv_data should be NULL or point to a buffer allocated by the caller, * the size of which should be in ap_priv_data_len, where ap_priv_data_len <= * IBT_APR_PRIV_DATA_SZ. * The private data from APR is returned in ap_priv_data. * The caller specifies amount of APR private data to be returned in * ap_priv_data_len. */ typedef struct ibt_ap_returns_s { ibt_ap_status_t ap_status; boolean_t ap_arej_info_valid; ibt_arej_info_t ap_arej_info; /* Only valid if redirect */ ibt_priv_data_len_t ap_priv_data_len; void *ap_priv_data; } ibt_ap_returns_t; /* * UD remote destination attributes. * * ud_sid, ud_addr, ud_pkt_lt and ud_pkey_ix must be specified. * These values can be as returned in an ibt_path_info_t struct from an * ibt_get_paths() call. * * ud_priv_data should be NULL or point to a buffer allocated by the caller, * the size of which is in ud_priv_data_len, where ud_priv_data_len <= * IBT_SIDR_REQ_PRIV_DATA_SZ. */ typedef struct ibt_ud_dest_attr_s { ib_svc_id_t ud_sid; /* Service ID */ ibt_adds_vect_t *ud_addr; /* Address Info */ uint16_t ud_pkey_ix; /* Pkey Index */ ib_time_t ud_pkt_lt; ibt_cm_ud_handler_t ud_cm_handler; /* An optional CM UD event */ /* which must be NULL */ /* if not specified. */ void *ud_cm_private; /* First arg to ud_cm_handler */ ibt_priv_data_len_t ud_priv_data_len; void *ud_priv_data; /* SIDR REQ private data */ } ibt_ud_dest_attr_t; /* * Define an optional UD return arguments structure. * * ud_priv_data should be NULL or point to a buffer allocated by the caller, * the size of which should be in ud_priv_data_len, where ud_priv_data_len <= * IBT_SIDR_REP_PRIV_DATA_SZ. */ typedef struct ibt_ud_returns_s { ibt_sidr_status_t ud_status; ibt_redirect_info_t ud_redirect; ib_qpn_t ud_dqpn; /* Returned destination QPN */ ib_qkey_t ud_qkey; /* Q_Key for destination QPN */ ibt_priv_data_len_t ud_priv_data_len; void *ud_priv_data; } ibt_ud_returns_t; /* * Multicast group attributes * Not specified attributes should be set to "NULL" or "0". * Used by ibt_join_mcg()/ibt_query_mcg(). * * mc_qkey, mc_pkey, mc_flow, mc_tclass, mc_sl, mc_join_state are required for * create - ibt_join_mcg(). */ typedef struct ibt_mcg_attr_s { ib_gid_t mc_mgid; /* MGID */ ib_gid_t mc_pgid; /* SGID of the end port being */ /* added to the MCG. */ ib_qkey_t mc_qkey; /* Q_Key */ ib_pkey_t mc_pkey; /* Partition key for this MCG */ ibt_mtu_req_t mc_mtu_req; /* MTU */ ibt_srate_req_t mc_rate_req; /* Static rate */ ibt_pkt_lt_req_t mc_pkt_lt_req; /* Packet Life Time Request */ uint_t mc_flow:20; /* FlowLabel. */ uint8_t mc_hop; /* HopLimit */ uint8_t mc_tclass; /* Traffic Class. */ uint8_t mc_sl:4; /* Service Level */ uint8_t mc_scope:4, /* Multicast Address Scope */ mc_join_state:4; /* FULL For create */ ib_lid_t mc_opaque1; } ibt_mcg_attr_t; /* * Multicast group attributes. * returned by ibt_join_mcg()/ibt_query_mcg(). */ typedef struct ibt_mcg_info_s { ibt_adds_vect_t mc_adds_vect; /* Address information */ ib_mtu_t mc_mtu; /* MTU */ ib_qkey_t mc_qkey; /* Q_Key */ uint16_t mc_pkey_ix; /* Pkey Index */ uint8_t mc_scope:4; /* Multicast Address Scope */ clock_t mc_opaque2; } ibt_mcg_info_t; /* * Define a callback function that can be used in Non-Blocking calls to * ibt_join_mcg(). */ typedef void (*ibt_mcg_handler_t)(void *arg, ibt_status_t retval, ibt_mcg_info_t *mcg_info_p); /* * Service Flags - sd_flags * * IBT_SRV_PEER_TYPE_SID Peer-to-peer Service IDs. */ typedef enum ibt_service_flags_e { IBT_SRV_NO_FLAGS = 0x0, IBT_SRV_PEER_TYPE_SID = 0x1 } ibt_service_flags_t; /* * Define a Service ID Registration structure. */ typedef struct ibt_srv_desc_s { ibt_cm_ud_handler_t sd_ud_handler; /* UD Service Handler */ ibt_cm_handler_t sd_handler; /* Non-UD Service Handler */ ibt_service_flags_t sd_flags; /* Flags */ } ibt_srv_desc_t; /* * Flag to indicate ibt_bind_service() to or NOT-to clean-up Stale matching * Local Service Records with SA prior to binding the new request. */ #define IBT_SBIND_NO_FLAGS 0 #define IBT_SBIND_NO_CLEANUP 1 /* * Define a Service ID Binding structure (data for service records). */ typedef struct ibt_srv_bind_s { uint64_t sb_key[2]; /* Service Key */ char *sb_name; /* Service Name (up to 63 chars) */ uint32_t sb_lease; /* Service Lease period (in seconds) */ ib_pkey_t sb_pkey; /* Service P_Key */ ibt_srv_data_t sb_data; /* Service Data */ uint_t sb_flag; /* indicates to/not-to clean-up stale */ /* matching local service records. */ } ibt_srv_bind_t; /* * ibt_cm_delay() flags. * * Refer to InfiniBand Architecture Release Volume 1 Rev 1.0a: * Section 12.6.6 MRA */ typedef enum ibt_cmdelay_flags_e { IBT_CM_DELAY_REQ = 0, IBT_CM_DELAY_REP = 1, IBT_CM_DELAY_LAP = 2 } ibt_cmdelay_flags_t; /* * The payload for DDI events passed on IB_PROP_UPDATE_EVENT. * This is passed as the bus nexus data to event_handler(9e). */ typedef struct ibt_prop_update_payload_s { union { struct { uint32_t srv_updated:1; uint32_t gid_updated:1; } _ib_prop_update_struct; uint32_t prop_updated; } _ib_prop_update_union; ibt_status_t ib_reprobe_status; #define ib_srv_prop_updated \ _ib_prop_update_union._ib_prop_update_struct.srv_updated #define ib_gid_prop_updated \ _ib_prop_update_union._ib_prop_update_struct.gid_updated #define ib_prop_updated \ _ib_prop_update_union.prop_updated } ibt_prop_update_payload_t; /* * FUNCTION PROTOTYPES. */ /* * ibt_attach() and ibt_detach(): * These are the calls into IBTF used during client driver attach() and * detach(). * * The IBTF returns an ibt_clnt_hdl_t to the client. This handle is used * to identify this client device in all subsequent calls into the IBTF. * * The ibt_detach() routine is called from a client driver's detach() * routine to deregister itself from the IBTF. */ ibt_status_t ibt_attach(ibt_clnt_modinfo_t *mod_infop, dev_info_t *arg, void *clnt_private, ibt_clnt_hdl_t *ibt_hdl_p); ibt_status_t ibt_detach(ibt_clnt_hdl_t ibt_hdl); /* * HCA FUNCTIONS */ /* * ibt_get_hca_list() * Returns the number of HCAs in a system and their node GUIDS. * * If hca_list_p is not NULL then the memory for the array of GUIDs is * allocated by the IBTF and should be freed by the caller using * ibt_free_hca_list(). If hca_list_p is NULL then no memory is allocated * by ibt_get_hca_list and only the number of HCAs in a system is returned. * * It is assumed that the caller can block in kmem_alloc. * * ibt_free_hca_list() * Free the memory allocated by ibt_get_hca_list(). */ uint_t ibt_get_hca_list(ib_guid_t **hca_list_p); void ibt_free_hca_list(ib_guid_t *hca_list, uint_t entries); /* * ibt_open_hca() - Open/Close a HCA. HCA can only be opened/closed * ibt_close_hca() once. ibt_open_hca() takes a client's ibt handle * and a GUID and returns a unique IBT client HCA * handle. * * These routines can not be called from interrupt context. */ ibt_status_t ibt_open_hca(ibt_clnt_hdl_t ibt_hdl, ib_guid_t hca_guid, ibt_hca_hdl_t *hca_hdl); ibt_status_t ibt_close_hca(ibt_hca_hdl_t hca_hdl); /* * ibt_query_hca() * ibt_query_hca_byguid() * Returns the static attributes of the specified HCA */ ibt_status_t ibt_query_hca(ibt_hca_hdl_t hca_hdl, ibt_hca_attr_t *hca_attrs); ibt_status_t ibt_query_hca_byguid(ib_guid_t hca_guid, ibt_hca_attr_t *hca_attrs); /* * ibt_query_hca_ports() * ibt_query_hca_ports_byguid() * Returns HCA port/ports attributes for the specified HCA port/ports. * ibt_query_hca_ports() allocates the memory required for the * ibt_hca_portinfo_t struct as well as the memory required for the SGID * and P_Key tables contained within that struct. * * ibt_free_portinfo() * Frees the memory allocated for a specified ibt_hca_portinfo_t struct. */ ibt_status_t ibt_query_hca_ports(ibt_hca_hdl_t hca_hdl, uint8_t port, ibt_hca_portinfo_t **port_info_p, uint_t *ports_p, uint_t *size_p); ibt_status_t ibt_query_hca_ports_byguid(ib_guid_t hca_guid, uint8_t port, ibt_hca_portinfo_t **port_info_p, uint_t *ports_p, uint_t *size_p); void ibt_free_portinfo(ibt_hca_portinfo_t *port_info, uint_t size); /* * ibt_set_hca_private() - Set/get the client private data. * ibt_get_hca_private() */ void ibt_set_hca_private(ibt_hca_hdl_t hca_hdl, void *clnt_private); void *ibt_get_hca_private(ibt_hca_hdl_t hca_hdl); /* * ibt_hca_handle_to_guid() * A helper function to retrieve HCA GUID for the specified handle. * Returns HCA GUID on which the specified Channel is allocated. Valid * if it is non-NULL on return. */ ib_guid_t ibt_hca_handle_to_guid(ibt_hca_hdl_t hca); /* * ibt_hca_guid_to_handle() * A helper function to retrieve a hca handle from a HCA GUID. */ ibt_status_t ibt_hca_guid_to_handle(ibt_clnt_hdl_t ibt_hdl, ib_guid_t hca_guid, ibt_hca_hdl_t *hca_hdl); /* * CONNECTION ESTABLISHMENT/TEAR DOWN FUNCTIONS. */ /* * ibt_get_paths * Finds the best path to a specified destination (as determined by the * IBTL) that satisfies the requirements specified in an ibt_path_attr_t * struct. */ ibt_status_t ibt_get_paths(ibt_clnt_hdl_t ibt_hdl, ibt_path_flags_t flags, ibt_path_attr_t *attr, uint8_t max_paths, ibt_path_info_t *paths, uint8_t *num_paths_p); /* * Callback function that can be used in ibt_aget_paths(), a Non-Blocking * version of ibt_get_paths(). */ typedef void (*ibt_path_handler_t)(void *arg, ibt_status_t retval, ibt_path_info_t *paths, uint8_t num_paths); /* * Find path(s) to a given destination or service asynchronously. * ibt_aget_paths() is a Non-Blocking version of ibt_get_paths(). */ ibt_status_t ibt_aget_paths(ibt_clnt_hdl_t ibt_hdl, ibt_path_flags_t flags, ibt_path_attr_t *attr, uint8_t max_paths, ibt_path_handler_t func, void *arg); /* * ibt_get_alt_path * Finds the best alternate path to a specified channel (as determined by * the IBTL) that satisfies the requirements specified in an * ibt_alt_path_attr_t struct. The specified channel must have been * previously opened successfully using ibt_open_rc_channel. */ ibt_status_t ibt_get_alt_path(ibt_channel_hdl_t chan, ibt_path_flags_t flags, ibt_alt_path_attr_t *attr, ibt_alt_path_info_t *alt_path); /* * ibt_open_rc_channel * ibt_open_rc_channel() opens a previously allocated RC communication * channel. The IBTL initiates the channel establishment protocol. */ ibt_status_t ibt_open_rc_channel(ibt_channel_hdl_t rc_chan, ibt_chan_open_flags_t flags, ibt_execution_mode_t mode, ibt_chan_open_args_t *args, ibt_rc_returns_t *returns); /* * ibt_close_rc_channel * Close the specified channel. Outstanding work requests are flushed * so that the client can do the associated clean up. After that, the * client will usually deregister the previously registered memory, * then free the channel by calling ibt_free_rc_channel(). * * This function will reuse CM event Handler provided in * ibt_open_rc_channel(). */ ibt_status_t ibt_close_rc_channel(ibt_channel_hdl_t rc_chan, ibt_execution_mode_t mode, void *priv_data, ibt_priv_data_len_t priv_data_len, uint8_t *ret_status, void *ret_priv_data, ibt_priv_data_len_t *ret_priv_data_len_p); /* * ibt_prime_close_rc_channel * * Allocates resources required for a close rc channel operation. * Calling ibt_prime_close_rc_channel() allows a channel to be * subsequently closed in interrupt context. * * A call is first made to ibt_prime_close_rc_channel in non-interrupt * context, followed by ibt_close_rc_channel in non-blocking mode from * interrupt context * * ibt_prime_close_rc_channel() can only be called on a previously opened * channel. */ ibt_status_t ibt_prime_close_rc_channel(ibt_channel_hdl_t rc_chan); /* * ibt_recycle_rc * * Recycle a RC channel which has transitioned to Error state. The * ibt_recycle_rc() function transitions the channel from Error * state (IBT_STATE_ERROR) to the state ready for use by * ibt_open_rc_channel. Basically, this function is very similar to * ibt_alloc_rc_channel, but reuses an existing RC channel. * * Clients are allowed to make resource clean up/free calls in the CM handler * * Client(s) must not invoke blocking version (ie., func specified as NULL) of * ibt_recycle_rc from cm callback for IBT_CM_EVENT_CONN_CLOSED * * Clients are strongly advised not to issue blocking calls from func, as this * would block the CM threads, and could delay or block other client connections * and ibtl related API invocations. */ ibt_status_t ibt_recycle_rc(ibt_channel_hdl_t rc_chan, ibt_cep_flags_t control, uint8_t hca_port_num, ibt_recycle_handler_t func, void *arg); /* * ibt_recycle_ud * * Recycle a UD channel which has transitioned to Error state. The * ibt_recycle_ud() function transitions the channel from Error * state (IBT_STATE_ERROR) to a usable state (IBT_STATE_RTS). * Basically, this function is very similar to ibt_alloc_ud_channel, * but reuses an existing UD channel. */ ibt_status_t ibt_recycle_ud(ibt_channel_hdl_t ud_chan, uint8_t hca_port_num, uint16_t pkey_ix, ib_qkey_t qkey); /* * MODIFY CHANNEL ATTRIBUTE FUNCTIONs. */ /* * ibt_pause_sendq * ibt_unpause_sendq * Place the send queue of the specified channel into the send queue * drained state. * Applicable for both RC and UD channels. */ ibt_status_t ibt_pause_sendq(ibt_channel_hdl_t chan, ibt_cep_modify_flags_t modify_flags); ibt_status_t ibt_unpause_sendq(ibt_channel_hdl_t chan); /* * ibt_resize_queues() * Resize the SendQ/RecvQ sizes of a channel. * * Applicable for both RC and UD channels. */ ibt_status_t ibt_resize_queues(ibt_channel_hdl_t chan, ibt_qflags_t flags, ibt_queue_sizes_t *request_sz, ibt_queue_sizes_t *actual_sz); /* * ibt_query_queues() * * Query the SendQ/RecvQ sizes of a channel. * Applicable for both RC and UD channels. */ ibt_status_t ibt_query_queues(ibt_channel_hdl_t chan, ibt_queue_sizes_t *actual_sz); /* * ibt_modify_rdma * Enable/disable RDMA operations. * * Applicable for RC channels only. */ ibt_status_t ibt_modify_rdma(ibt_channel_hdl_t rc_chan, ibt_cep_modify_flags_t modify_flags, ibt_cep_flags_t flags); /* * ibt_set_rdma_resource * Change the number of resources to be used for incoming and outgoing * RDMA reads & Atomics. */ ibt_status_t ibt_set_rdma_resource(ibt_channel_hdl_t rc_chan, ibt_cep_modify_flags_t modify_flags, uint8_t rdma_ra_out, uint8_t rdma_ra_in); /* * ibt_change_port * Change the primary physical port of an RC channel. (This is done only * if HCA supports this capability). Can only be called on a paused * channel. * Applicable for RC channels only. */ ibt_status_t ibt_change_port(ibt_channel_hdl_t rc_chan, uint8_t port_num); /* * SERVICE REGISTRATION FUNCTIONS */ /* * ibt_register_service() * ibt_deregister_service() * Register/deregister a Service (range of Service IDs) with the IBTF. * * ibt_bind_service() * ibt_unbind_service() * ibt_unbind_all_services() * Bind a Service to a given port (GID), and optionally create * service record(s) with the SA for ibt_get_paths() to find. */ ibt_status_t ibt_register_service(ibt_clnt_hdl_t ibt_hdl, ibt_srv_desc_t *service, ib_svc_id_t sid, int num_sids, ibt_srv_hdl_t *srv_hdl_p, ib_svc_id_t *ret_sid_p); ibt_status_t ibt_deregister_service(ibt_clnt_hdl_t ibt_hdl, ibt_srv_hdl_t srv_hdl); ibt_status_t ibt_bind_service(ibt_srv_hdl_t srv_hdl, ib_gid_t gid, ibt_srv_bind_t *srv_bind, void *cm_private, ibt_sbind_hdl_t *sb_hdl_p); ibt_status_t ibt_unbind_service(ibt_srv_hdl_t srv_hdl, ibt_sbind_hdl_t sb_hdl); ibt_status_t ibt_unbind_all_services(ibt_srv_hdl_t srv_hdl); /* * ibt_cm_delay * A client CM handler/srv_handler function can call this function to * extend its response time to a CM event. * Applicable for RC channels only. */ ibt_status_t ibt_cm_delay(ibt_cmdelay_flags_t flags, void *cm_session_id, clock_t service_time, void *priv_data, ibt_priv_data_len_t priv_data_len); /* * ibt_cm_proceed * * An IBT client calls ibt_cm_proceed() to proceed with a connection that * previously deferred by the client returning IBT_CM_DEFER on a CM handler * callback. CM events that can be deferred and continued with ibt_cm_proceed() * are REQ_RCV, REP_RCV, LAP_RCV, and DREQ_RCV. * * NOTE : * * Typically CM completes processing of a client's CM handler return, with * IBT_CM_DEFER status, before processing of the corresponding ibt_cm_proceed() * is started. However a race exists where by CM may not have completed the * client's handler return processing when ibt_cm_proceed() is called by a * client. In this case ibt_cm_proceed() will block until processing of the * client's CM handler return is complete. * * A client that returns IBT_CM_DEFER from the cm handler must * subsequently make a call to ibt_cm_proceed(). It is illegal to call * ibt_cm_proceed() on a channel that has not had the connection * establishment deferred. * * Client cannot call ibt_cm_proceed from the cm handler. */ ibt_status_t ibt_cm_proceed(ibt_cm_event_type_t event, void *session_id, ibt_cm_status_t status, ibt_cm_proceed_reply_t *cm_event_data, void *priv_data, ibt_priv_data_len_t priv_data_len); /* * ibt_cm_ud_proceed * * An IBT client calls ibt_cm_ud_proceed() to proceed with an * IBT_CM_UD_EVENT_SIDR_REQ UD event that was previously deferred by the * client returning IBT_CM_DEFER on a CM UD handler callback. * NOTE : * * Typically CM completes processing of a client's CM handler return, with * IBT_CM_DEFER status, before processing of the corresponding * ibt_cm_ud_proceed() is started. However a race exists where by CM may not * have completed the client's handler return processing when * ibt_cm_ud_proceed() is called by a client. In this case ibt_cm_ud_proceed() * will block until processing of the client's CM handler return is complete. * * A client that returns IBT_CM_DEFER from the cm handler must * subsequently make a call to ibt_cm_ud_proceed(). It is illegal to call * ibt_cm_ud_proceed() on a channel that has not had the connection * establishment deferred. * * Client cannot call ibt_cm_ud_proceed from the cm handler. */ ibt_status_t ibt_cm_ud_proceed(void *session_id, ibt_channel_hdl_t ud_channel, ibt_cm_status_t status, ibt_redirect_info_t *redirect_infop, void *priv_data, ibt_priv_data_len_t priv_data_len); /* * COMPLETION QUEUES. * * ibt_alloc_cq_sched() * Reserve CQ scheduling class resources * * ibt_free_cq_sched() * Free CQ scheduling class resources */ ibt_status_t ibt_alloc_cq_sched(ibt_hca_hdl_t hca_hdl, ibt_cq_sched_attr_t *attr, ibt_sched_hdl_t *sched_hdl_p); ibt_status_t ibt_free_cq_sched(ibt_hca_hdl_t hca_hdl, ibt_sched_hdl_t sched_hdl, uint_t load); /* * ibt_alloc_cq() * Allocate a completion queue. */ ibt_status_t ibt_alloc_cq(ibt_hca_hdl_t hca_hdl, ibt_cq_attr_t *cq_attr, ibt_cq_hdl_t *ibt_cq_p, uint_t *real_size); /* * ibt_free_cq() * Free allocated CQ resources. */ ibt_status_t ibt_free_cq(ibt_cq_hdl_t ibt_cq); /* * ibt_enable_cq_notify() * Enable notification requests on the specified CQ. * Applicable for both RC and UD channels. * * Completion notifications are disabled by setting the completion * handler to NULL by calling ibt_set_cq_handler(). */ ibt_status_t ibt_enable_cq_notify(ibt_cq_hdl_t ibt_cq, ibt_cq_notify_flags_t notify_type); /* * ibt_set_cq_handler() * Register a work request completion handler with the IBTF. * Applicable for both RC and UD channels. * * Completion notifications are disabled by setting the completion * handler to NULL. When setting the handler to NULL, no additional * calls to the CQ handler will be initiated. * * This function does not otherwise change the state of previous * calls to ibt_enable_cq_notify(). */ void ibt_set_cq_handler(ibt_cq_hdl_t ibt_cq, ibt_cq_handler_t completion_handler, void *arg); /* * ibt_poll_cq() * Poll the specified CQ for the completion of work requests (WRs). * If the CQ contains completed WRs, up to num_wc of them are returned. * Applicable for both RC and UD channels. */ ibt_status_t ibt_poll_cq(ibt_cq_hdl_t ibt_cq, ibt_wc_t *work_completions, uint_t num_wc, uint_t *num_polled); /* * ibt_query_cq() * Return the total number of entries in the CQ. */ ibt_status_t ibt_query_cq(ibt_cq_hdl_t ibt_cq, uint_t *entries); /* * ibt_resize_cq() * Change the size of a CQ. */ ibt_status_t ibt_resize_cq(ibt_cq_hdl_t ibt_cq, uint_t new_sz, uint_t *real_sz); /* * ibt_set_cq_private() * ibt_get_cq_private() * Set/get the client private data. */ void ibt_set_cq_private(ibt_cq_hdl_t ibt_cq, void *clnt_private); void *ibt_get_cq_private(ibt_cq_hdl_t ibt_cq); /* * Memory Management Functions. * Applicable for both RC and UD channels. * * ibt_register_mr() * Prepares a virtually addressed memory region for use by a HCA. A * description of the registered memory suitable for use in Work Requests * (WRs) is returned in the ibt_mr_desc_t parameter. * * ibt_register_buf() * Prepares a memory region described by a buf(9S) struct for use by a * HCA. A description of the registered memory suitable for use in * Work Requests (WRs) is returned in the ibt_mr_desc_t parameter. * * ibt_query_mr() * Retrieves information about a specified memory region. * * ibt_deregister_mr() * Remove a memory region from a HCA translation table, and free all * resources associated with the memory region. * * ibt_reregister_mr() * ibt_reregister_buf() * Modify the attributes of an existing memory region. * * ibt_register_shared_mr() * Given an existing memory region, a new memory region associated with * the same physical locations is created. * * ibt_sync_mr() * Sync a memory region for either RDMA reads or RDMA writes * * ibt_alloc_mw() * Allocate a memory window. * * ibt_query_mw() * Retrieves information about a specified memory window. * * ibt_free_mw() * De-allocate the Memory Window. */ ibt_status_t ibt_register_mr(ibt_hca_hdl_t hca_hdl, ibt_pd_hdl_t pd, ibt_mr_attr_t *mem_attr, ibt_mr_hdl_t *mr_hdl_p, ibt_mr_desc_t *mem_desc); ibt_status_t ibt_register_buf(ibt_hca_hdl_t hca_hdl, ibt_pd_hdl_t pd, ibt_smr_attr_t *mem_bpattr, struct buf *bp, ibt_mr_hdl_t *mr_hdl_p, ibt_mr_desc_t *mem_desc); ibt_status_t ibt_query_mr(ibt_hca_hdl_t hca_hdl, ibt_mr_hdl_t mr_hdl, ibt_mr_query_attr_t *attr); ibt_status_t ibt_deregister_mr(ibt_hca_hdl_t hca_hdl, ibt_mr_hdl_t mr_hdl); ibt_status_t ibt_reregister_mr(ibt_hca_hdl_t hca_hdl, ibt_mr_hdl_t mr_hdl, ibt_pd_hdl_t pd, ibt_mr_attr_t *mem_attr, ibt_mr_hdl_t *mr_hdl_p, ibt_mr_desc_t *mem_desc); ibt_status_t ibt_reregister_buf(ibt_hca_hdl_t hca_hdl, ibt_mr_hdl_t mr_hdl, ibt_pd_hdl_t pd, ibt_smr_attr_t *mem_bpattr, struct buf *bp, ibt_mr_hdl_t *mr_hdl_p, ibt_mr_desc_t *mem_desc); ibt_status_t ibt_register_shared_mr(ibt_hca_hdl_t hca_hdl, ibt_mr_hdl_t mr_hdl, ibt_pd_hdl_t pd, ibt_smr_attr_t *mem_sattr, ibt_mr_hdl_t *mr_hdl_p, ibt_mr_desc_t *mem_desc); ibt_status_t ibt_sync_mr(ibt_hca_hdl_t hca_hdl, ibt_mr_sync_t *mr_segments, size_t num_segments); ibt_status_t ibt_alloc_mw(ibt_hca_hdl_t hca_hdl, ibt_pd_hdl_t pd, ibt_mw_flags_t flags, ibt_mw_hdl_t *mw_hdl_p, ibt_rkey_t *rkey); ibt_status_t ibt_query_mw(ibt_hca_hdl_t hca_hdl, ibt_mw_hdl_t mw_hdl, ibt_mw_query_attr_t *mw_attr_p); ibt_status_t ibt_free_mw(ibt_hca_hdl_t hca_hdl, ibt_mw_hdl_t mw_hdl); /* * ibt_alloc_lkey() * Allocates physical buffer list resources for use in memory * registrations. * * Applicable for both RC and UD channels. */ ibt_status_t ibt_alloc_lkey(ibt_hca_hdl_t hca_hdl, ibt_pd_hdl_t pd, ibt_lkey_flags_t flags, uint_t phys_buf_list_sz, ibt_mr_hdl_t *mr_p, ibt_pmr_desc_t *mem_desc_p); /* * Physical Memory Management Functions. * Applicable for both RC and UD channels. * * ibt_register_phys_mr() * Prepares a physically addressed memory region for use by a HCA. * * ibt_reregister_phys_mr() * Modify the attributes of an existing memory region. */ ibt_status_t ibt_register_phys_mr(ibt_hca_hdl_t hca_hdl, ibt_pd_hdl_t pd, ibt_pmr_attr_t *mem_pattr, ibt_mr_hdl_t *mr_hdl_p, ibt_pmr_desc_t *mem_desc_p); ibt_status_t ibt_reregister_phys_mr(ibt_hca_hdl_t hca_hdl, ibt_mr_hdl_t mr_hdl, ibt_pd_hdl_t pd, ibt_pmr_attr_t *mem_pattr, ibt_mr_hdl_t *mr_hdl_p, ibt_pmr_desc_t *mem_desc_p); /* * Address Translation. */ /* * ibt_map_mem_area() * Translate a kernel virtual address range into HCA physical addresses. * A set of physical addresses, that can be used with "Reserved L_Key", * register physical, and "Fast Registration Work Request" operations * is returned. */ ibt_status_t ibt_map_mem_area(ibt_hca_hdl_t hca_hdl, ibt_va_attr_t *va_attrs, uint_t paddr_list_len, ibt_phys_buf_t *paddr_list_p, uint_t *num_paddr_p, size_t *paddr_bufsz_p, ib_memlen_t *paddr_offset_p, ibt_ma_hdl_t *ma_hdl_p); /* * ibt_unmap_mem_area() * Un pin physical pages pinned during an ibt_map_mem_area() call. */ ibt_status_t ibt_unmap_mem_area(ibt_hca_hdl_t hca_hdl, ibt_ma_hdl_t ma_hdl); /* * Work Request Functions * Applicable for RC and UD channels. * * ibt_post_send() * Post send work requests to the specified channel. * * ibt_post_recv() * ibt_post_srq() * Post receive work requests to the specified channel. */ ibt_status_t ibt_post_send(ibt_channel_hdl_t chan, ibt_send_wr_t *wr_list, uint_t num_wr, uint_t *posted); ibt_status_t ibt_post_recv(ibt_channel_hdl_t chan, ibt_recv_wr_t *wr_list, uint_t num_wr, uint_t *posted); ibt_status_t ibt_post_srq(ibt_srq_hdl_t srq, ibt_recv_wr_t *wr_list, uint_t num_wr, uint_t *posted); /* * Alternate Path Migration Functions. * Applicable for RC channels only. * * * ibt_get_alt_path() * Finds the best alternate path to a specified channel (as determined by * the IBTL) that satisfies the requirements specified in an * ibt_alt_path_attr_t struct. The specified channel must have been * previously opened successfully using ibt_open_rc_channel. * This function also ensures that the service being accessed by the * channel is available at the selected alternate port. * * Note: The apa_dgid must be on the same destination channel adapter, * if specified. * * * ibt_set_alt_path() * Load the specified alternate path. Causes the CM to send an LAP message * to the remote node. If successful, the local channel is updated with * the new alternate path and the channel migration state is set to REARM. * Can only be called on a previously opened RC channel. The channel must * be either in RTS or paused state. * * * ibt_migrate_path() * Force the CI to use the alternate path. The alternate path becomes * the primary path. A new alternate path should be loaded and enabled. */ ibt_status_t ibt_get_alt_path(ibt_channel_hdl_t rc_chan, ibt_path_flags_t flags, ibt_alt_path_attr_t *attr, ibt_alt_path_info_t *alt_pathp); ibt_status_t ibt_set_alt_path(ibt_channel_hdl_t rc_chan, ibt_execution_mode_t mode, ibt_alt_path_info_t *alt_pinfo, void *priv_data, ibt_priv_data_len_t priv_data_len, ibt_ap_returns_t *ret_args); ibt_status_t ibt_migrate_path(ibt_channel_hdl_t rc_chan); /* * Multicast group Functions. * Applicable for UD channels only. */ /* * ibt_attach_mcg() * Attaches a UD channel to the specified multicast group. On successful * completion, this channel will be provided with a copy of every * multicast message addressed to the group specified by the MGID * (mcg_info->mc_adds_vect.av_dgid) and received on the HCA port with * which the channel is associated. */ ibt_status_t ibt_attach_mcg(ibt_channel_hdl_t ud_chan, ibt_mcg_info_t *mcg_info); /* * ibt_detach_mcg() * Detach the specified UD channel from the specified multicast group. */ ibt_status_t ibt_detach_mcg(ibt_channel_hdl_t ud_chan, ibt_mcg_info_t *mcg_info); /* * ibt_join_mcg() * Join a multicast group. The first full member "join" causes the MCG * to be created. */ ibt_status_t ibt_join_mcg(ib_gid_t rgid, ibt_mcg_attr_t *mcg_attr, ibt_mcg_info_t *mcg_info_p, ibt_mcg_handler_t func, void *arg); /* * ibt_leave_mcg() * The port associated with the port GID shall be removed from the * multicast group specified by MGID (mc_gid) or from all the multicast * groups of which it is a member if the MGID (mc_gid) is not specified * (i.e. mc_gid.mgid_prefix must have 8-bits of 11111111 at the start of * the GID to identify this as being a multicast GID). * * The last full member to leave causes the destruction of the Multicast * Group. */ ibt_status_t ibt_leave_mcg(ib_gid_t rgid, ib_gid_t mc_gid, ib_gid_t port_gid, uint8_t mc_join_state); /* * ibt_query_mcg() * Request information on multicast groups that match the parameters * specified in mcg_attr. Information on each multicast group is returned * to the caller in the form of an array of ibt_mcg_info_t. * ibt_query_mcg() allocates the memory for this array and returns a * pointer to the array (mcgs_p) and the number of entries in the array * (entries_p). This memory should be freed by the client using * ibt_free_mcg_info(). */ ibt_status_t ibt_query_mcg(ib_gid_t rgid, ibt_mcg_attr_t *mcg_attr, uint_t mcgs_max_num, ibt_mcg_info_t **mcgs_info_p, uint_t *entries_p); /* * ibt_free_mcg_info() * Free the memory allocated by successful ibt_query_mcg() */ void ibt_free_mcg_info(ibt_mcg_info_t *mcgs_info, uint_t entries); /* * ibt_register_subnet_notices() * Register a handler to be called for subnet notifications. */ void ibt_register_subnet_notices(ibt_clnt_hdl_t ibt_hdl, ibt_sm_notice_handler_t sm_notice_handler, void *private); /* * Protection Domain Functions. * * ibt_alloc_pd() * ibt_free_pd() * Allocate/Release a protection domain */ ibt_status_t ibt_alloc_pd(ibt_hca_hdl_t hca_hdl, ibt_pd_flags_t flags, ibt_pd_hdl_t *pd); ibt_status_t ibt_free_pd(ibt_hca_hdl_t hca_hdl, ibt_pd_hdl_t pd); /* * P_Key to P_Key Index conversion Functions. * * ibt_pkey2index_byguid * ibt_pkey2index Convert a P_Key into a P_Key index. * * ibt_index2pkey_byguid * ibt_index2pkey Convert a P_Key Index into a P_Key. */ ibt_status_t ibt_pkey2index(ibt_hca_hdl_t hca_hdl, uint8_t port_num, ib_pkey_t pkey, uint16_t *pkey_ix); ibt_status_t ibt_index2pkey(ibt_hca_hdl_t hca_hdl, uint8_t port_num, uint16_t pkey_ix, ib_pkey_t *pkey); ibt_status_t ibt_pkey2index_byguid(ib_guid_t hca_guid, uint8_t port_num, ib_pkey_t pkey, uint16_t *pkey_ix); ibt_status_t ibt_index2pkey_byguid(ib_guid_t hca_guid, uint8_t port_num, uint16_t pkey_ix, ib_pkey_t *pkey); /* * ibt_ci_data_in() * * Pass CI specific userland data for CI objects to the CI. */ ibt_status_t ibt_ci_data_in(ibt_hca_hdl_t hca, ibt_ci_data_flags_t flags, ibt_object_type_t object, void *ibt_object_handle, void *data_p, size_t data_sz); /* * ibt_ci_data_out() * * Obtain CI specific userland data for CI objects. */ ibt_status_t ibt_ci_data_out(ibt_hca_hdl_t hca, ibt_ci_data_flags_t flags, ibt_object_type_t object, void *ibt_object_handle, void *data_p, size_t data_sz); /* * Node Information. */ /* Node type : n_node_type */ #define IBT_NODE_TYPE_CHANNEL_ADAPTER 1 /* HCA or TCA */ #define IBT_NODE_TYPE_SWITCH 2 #define IBT_NODE_TYPE_ROUTER 3 typedef struct ibt_node_info_s { ib_guid_t n_sys_img_guid; /* System Image GUID */ ib_guid_t n_node_guid; /* Node GUID */ ib_guid_t n_port_guid; /* Port GUID */ uint16_t n_dev_id; /* Device ID */ uint32_t n_revision; /* Device Revision */ uint32_t n_vendor_id:24; /* Device Vendor ID */ uint8_t n_num_ports; /* Number of ports on this node. */ uint8_t n_port_num; /* Port number. */ uint8_t n_node_type; /* Node type */ char n_description[64]; /* NULL terminated ASCII string */ } ibt_node_info_t; /* * ibt_gid_to_node_info() * Retrieve node information for the specified GID. */ ibt_status_t ibt_gid_to_node_info(ib_gid_t gid, ibt_node_info_t *node_info_p); /* * ibt_reprobe_dev * Reprobe properties for IOC device node. */ ibt_status_t ibt_reprobe_dev(dev_info_t *dip); /* * ibt_get_companion_port_gids() * * Get list of GID's available on a companion port(s) of the specified * GID or list of GIDs available on a specified Node GUID/System Image * GUID. */ ibt_status_t ibt_get_companion_port_gids(ib_gid_t gid, ib_guid_t hca_guid, ib_guid_t sysimg_guid, ib_gid_t **gids_p, uint_t *num_gids_p); /* * SHARED RECEIVE QUEUE */ /* * ibt_alloc_srq() * Allocate a shared receive queue. */ ibt_status_t ibt_alloc_srq(ibt_hca_hdl_t hca_hdl, ibt_srq_flags_t flags, ibt_pd_hdl_t pd, ibt_srq_sizes_t *sizes, ibt_srq_hdl_t *ibt_srq_p, ibt_srq_sizes_t *real_size_p); /* * ibt_free_srq() * Free allocated SRQ resources. */ ibt_status_t ibt_free_srq(ibt_srq_hdl_t ibt_srq); /* * ibt_query_srq() * Query a shared receive queue. */ ibt_status_t ibt_query_srq(ibt_srq_hdl_t ibt_srq, ibt_pd_hdl_t *pd_p, ibt_srq_sizes_t *sizes_p, uint_t *limit_p); /* * ibt_modify_srq() * Modify a shared receive queue. */ ibt_status_t ibt_modify_srq(ibt_srq_hdl_t ibt_srq, ibt_srq_modify_flags_t flags, uint_t size, uint_t limit, uint_t *real_size_p); /* * ibt_set_srq_private() * ibt_get_srq_private() * Set/get the SRQ client private data. */ void ibt_set_srq_private(ibt_srq_hdl_t ibt_srq, void *clnt_private); void *ibt_get_srq_private(ibt_srq_hdl_t ibt_srq); /* * ibt_check_failure() * Function to test for special case failures */ ibt_failure_type_t ibt_check_failure(ibt_status_t status, uint64_t *reserved_p); /* * ibt_hw_is_present() returns 0 when there is no IB hardware actively * running. This is primarily useful for modules like rpcmod which needs a * quick check to decide whether or not it should try to use InfiniBand. */ int ibt_hw_is_present(); /* * CONTRACT PRIVATE ONLY INTERFACES * * DO NOT USE THE FOLLOWING FUNCTIONS WITHOUT SIGNING THE CONTRACT * WITH IBTF GROUP. */ /* Define an Address Record structure (data for ATS service records). */ typedef struct ibt_ar_s { ib_gid_t ar_gid; /* GID of local HCA port */ ib_pkey_t ar_pkey; /* P_Key valid on port of ar_gid */ uint8_t ar_data[16]; /* Data affiliated with GID/P_Key */ } ibt_ar_t; /* * ibt_register_ar() * ibt_deregister_ar() * Register/deregister an Address Record with the SA. * ibt_query_ar() * Query the SA for Address Records matching either GID/P_Key or Data. */ ibt_status_t ibt_register_ar(ibt_clnt_hdl_t ibt_hdl, ibt_ar_t *arp); ibt_status_t ibt_deregister_ar(ibt_clnt_hdl_t ibt_hdl, ibt_ar_t *arp); ibt_status_t ibt_query_ar(ib_gid_t *sgid, ibt_ar_t *queryp, ibt_ar_t *resultp); /* * ibt_modify_system_image() * ibt_modify_system_image_byguid() * Modify specified HCA's system image GUID. */ ibt_status_t ibt_modify_system_image(ibt_hca_hdl_t hca_hdl, ib_guid_t sys_guid); ibt_status_t ibt_modify_system_image_byguid(ib_guid_t hca_guid, ib_guid_t sys_guid); /* * ibt_modify_port() * ibt_modify_port_byguid() * Modify the specified port, or all ports attribute(s). */ ibt_status_t ibt_modify_port(ibt_hca_hdl_t hca_hdl, uint8_t port, ibt_port_modify_flags_t flags, uint8_t init_type); ibt_status_t ibt_modify_port_byguid(ib_guid_t hca_guid, uint8_t port, ibt_port_modify_flags_t flags, uint8_t init_type); /* * ibt_get_port_state() * ibt_get_port_state_byguid() * Return the most commonly requested attributes of an HCA port. * If the link state is not IBT_PORT_ACTIVE, the other returned values * are undefined. */ ibt_status_t ibt_get_port_state(ibt_hca_hdl_t hca_hdl, uint8_t port, ib_gid_t *sgid_p, ib_lid_t *base_lid_p); ibt_status_t ibt_get_port_state_byguid(ib_guid_t hca_guid, uint8_t port, ib_gid_t *sgid_p, ib_lid_t *base_lid_p); /* * Fast Memory Registration (FMR). * * ibt_create_fmr_pool * Not fast-path. * ibt_create_fmr_pool() verifies that the HCA supports FMR and allocates * and initializes an "FMR pool". This pool contains state specific to * this registration, including the watermark setting to determine when * to sync, and the total number of FMR regions available within this pool. * * ibt_destroy_fmr_pool * ibt_destroy_fmr_pool() deallocates all of the FMR regions in a specific * pool. All state and information regarding the pool are destroyed and * returned as free space once again. No more use of FMR regions in this * pool are possible without a subsequent call to ibt_create_fmr_pool(). * * ibt_flush_fmr_pool * ibt_flush_fmr_pool forces a flush to occur. At the client's request, * any unmapped FMR regions (See 'ibt_deregister_mr())') are returned to * a free state. This function allows for an asynchronous cleanup of * formerly used FMR regions. Sync operation is also performed internally * by HCA driver, when 'watermark' settings for the number of free FMR * regions left in the "pool" is reached. * * ibt_register_physical_fmr * ibt_register_physical_fmr() assigns a "free" entry from the FMR Pool. * It first consults the "FMR cache" to see if this is a duplicate memory * registration to something already in use. If not, then a free entry * in the "pool" is marked used. * * ibt_deregister_fmr * The ibt_deregister_fmr un-maps the resources reserved from the FMR * pool by ibt_register_physical_fmr(). The ibt_deregister_fmr() will * mark the region as free in the FMR Pool. */ ibt_status_t ibt_create_fmr_pool(ibt_hca_hdl_t hca_hdl, ibt_pd_hdl_t pd, ibt_fmr_pool_attr_t *fmr_params, ibt_fmr_pool_hdl_t *fmr_pool_p); ibt_status_t ibt_destroy_fmr_pool(ibt_hca_hdl_t hca_hdl, ibt_fmr_pool_hdl_t fmr_pool); ibt_status_t ibt_flush_fmr_pool(ibt_hca_hdl_t hca_hdl, ibt_fmr_pool_hdl_t fmr_pool); ibt_status_t ibt_register_physical_fmr(ibt_hca_hdl_t hca_hdl, ibt_fmr_pool_hdl_t fmr_pool, ibt_pmr_attr_t *mem_pattr, ibt_mr_hdl_t *mr_hdl_p, ibt_pmr_desc_t *mem_desc_p); ibt_status_t ibt_deregister_fmr(ibt_hca_hdl_t hca, ibt_mr_hdl_t mr_hdl); #ifdef __cplusplus } #endif #endif /* _SYS_IB_IBTL_IBTI_COMMON_H */