/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _SYS_IB_ADAPTERS_TAVOR_CQ_H #define _SYS_IB_ADAPTERS_TAVOR_CQ_H /* * tavor_cq.h * Contains all of the prototypes, #defines, and structures necessary * for the Completion Queue Processing routines. * Specifically it contains the various completion types, flags, * structures used for managing Tavor completion queues, and prototypes * for many of the functions consumed by other parts of the Tavor driver * (including those routines directly exposed through the IBTF CI * interface). */ #include #include #include #include #include #ifdef __cplusplus extern "C" { #endif /* * The following defines specify the default number of Completion Queues (CQ) * their maximum size. Settings exist for the supported DDR DIMM sizes of * 128MB and 256MB. If a DIMM greater than 256 is found, then the 256MB * profile is used. See tavor_cfg.c for more discussion on config profiles. * * For manual configuration (not using config profiles), these values are * controllable through the "tavor_log_max_cq_sz" and "tavor_log_num_cq" * configuration variables, respectively. To override config profile settings * the 'tavor_alt_config_enable' configuration variable must first be set. * * Note: We also have a define for the minimum size of a CQ. CQs allocated * with size 0, 1, 2, or 3 will always get back a CQ of size 4. This is the * smallest size that Tavor hardware and software can correctly handle. */ #define TAVOR_NUM_CQ_SHIFT_128 0x10 #define TAVOR_NUM_CQ_SHIFT_256 0x11 #define TAVOR_CQ_SZ_SHIFT 0x10 #define TAVOR_CQ_SZ (1 << TAVOR_CQ_SZ_SHIFT) #define TAVOR_CQ_MIN_SIZE 0x3 /* * Minimal configuration values. */ #define TAVOR_NUM_CQ_SHIFT_MIN 0xC #define TAVOR_CQ_SZ_SHIFT_MIN 0xC /* * The following macro determines whether the contents of CQ memory (CQEs) * need to be sync'd (with ddi_dma_sync()). This decision is based on whether * the CQ memory is in DDR memory (no sync) or system memory (sync required). * Note: It doesn't make much sense to put CQEs in DDR memory (since they are * primarily written by HW and read by the CPU), but the driver does support * that possibility. And it also supports the possibility that if a CQ in * system memory is mapped DDI_DMA_CONSISTENT, it can be configured to not be * sync'd because of the "sync override" parameter in the config profile. */ #define TAVOR_CQ_IS_SYNC_REQ(state, cqinfo) \ ((((((state)->ts_cfg_profile->cp_streaming_consistent) && \ ((state)->ts_cfg_profile->cp_consistent_syncoverride))) || \ ((cqinfo).qa_location == TAVOR_QUEUE_LOCATION_INDDR)) \ ? 0 : 1) /* * The following defines specify the size of the individual Completion Queue * Context (CQC) entries */ #define TAVOR_CQC_SIZE_SHIFT 0x6 #define TAVOR_CQC_SIZE (1 << TAVOR_CQC_SIZE_SHIFT) /* * These are the defines for the Tavor CQ completion statuses. They are * specified by the Tavor register specification. */ #define TAVOR_CQE_SUCCESS 0x0 #define TAVOR_CQE_LOC_LEN_ERR 0x1 #define TAVOR_CQE_LOC_OP_ERR 0x2 #define TAVOR_CQE_LOC_EEC_ERR 0x3 /* unsupported: RD */ #define TAVOR_CQE_LOC_PROT_ERR 0x4 #define TAVOR_CQE_WR_FLUSHED_ERR 0x5 #define TAVOR_CQE_MW_BIND_ERR 0x6 #define TAVOR_CQE_BAD_RESPONSE_ERR 0x10 #define TAVOR_CQE_LOCAL_ACCESS_ERR 0x11 #define TAVOR_CQE_REM_INV_REQ_ERR 0x12 #define TAVOR_CQE_REM_ACC_ERR 0x13 #define TAVOR_CQE_REM_OP_ERR 0x14 #define TAVOR_CQE_TRANS_TO_ERR 0x15 #define TAVOR_CQE_RNRNAK_TO_ERR 0x16 #define TAVOR_CQE_LOCAL_RDD_VIO_ERR 0x20 /* unsupported: RD */ #define TAVOR_CQE_REM_INV_RD_REQ_ERR 0x21 /* unsupported: RD */ #define TAVOR_CQE_EEC_REM_ABORTED_ERR 0x22 /* unsupported: RD */ #define TAVOR_CQE_INV_EEC_NUM_ERR 0x23 /* unsupported: RD */ #define TAVOR_CQE_INV_EEC_STATE_ERR 0x24 /* unsupported: RD */ /* * These are the defines for the Tavor CQ entry types. They are also * specified by the Tavor register specification. They indicate what type * of work request is completing (for successful completions). Note: The * "SND" or "RCV" in each define is used to indicate whether the completion * work request was from the Send work queue or the Receive work queue on * the associated QP. */ #define TAVOR_CQE_SND_RDMAWR 0x8 #define TAVOR_CQE_SND_RDMAWR_IMM 0x9 #define TAVOR_CQE_SND_SEND 0xA #define TAVOR_CQE_SND_SEND_IMM 0xB #define TAVOR_CQE_SND_RDMARD 0x10 #define TAVOR_CQE_SND_ATOMIC_CS 0x11 #define TAVOR_CQE_SND_ATOMIC_FA 0x12 #define TAVOR_CQE_SND_BIND_MW 0x18 #define TAVOR_CQE_RCV_RECV_IMM 0x3 #define TAVOR_CQE_RCV_RECV_IMM2 0x5 #define TAVOR_CQE_RCV_RECV 0x2 #define TAVOR_CQE_RCV_RECV2 0x4 #define TAVOR_CQE_RCV_RDMAWR_IMM 0x9 #define TAVOR_CQE_RCV_RDMAWR_IMM2 0xB /* Define for maximum CQ number mask (CQ number is 24 bits) */ #define TAVOR_CQ_MAXNUMBER_MSK 0xFFFFFF /* * This define and the following macro are used to find an event queue for a * new CQ based on its completion queue number. Note: This is a rather * simple method that we use today. We simply choose from one of the first * 32 EQs based on the 5 least significant bits of the CQ number. */ #define TAVOR_CQ_TO_EQ_MASK 0x1F #define TAVOR_CQ_EQNUM_GET(cqnum) ((cqnum) & TAVOR_CQ_TO_EQ_MASK) /* * The following macro is even simpler than the above one. This is used to * find an event queue for CQ errors for a new CQ. In theory we could do this * based on the CQ's number (as we do above). Today, however, all CQ error * events go to one specific EQ (i.e. EQ #32). */ #define TAVOR_CQ_ERREQNUM_GET(cqnum) 0x20 /* * The following defines are used for Tavor CQ error handling. Note: For * CQEs which correspond to error events, the Tavor device requires some * special handling by software. These defines are used to identify and * extract the necessary information from each error CQE, including status * code (above), doorbell count, and whether a error completion is for a * send or receive work request. */ #define TAVOR_CQE_ERR_STATUS_SHIFT 24 #define TAVOR_CQE_ERR_STATUS_MASK 0xFF #define TAVOR_CQE_ERR_DBDCNT_MASK 0xFFFF #define TAVOR_CQE_SEND_ERR_OPCODE 0xFF #define TAVOR_CQE_RECV_ERR_OPCODE 0xFE #define TAVOR_CQ_SYNC_AND_DB 0 #define TAVOR_CQ_RECYCLE_ENTRY 1 /* Defines for tracking whether a CQ is being used with special QP or not */ #define TAVOR_CQ_IS_NORMAL 0 #define TAVOR_CQ_IS_SPECIAL 1 /* * The tavor_sw_cq_s structure is also referred to using the "tavor_cqhdl_t" * typedef (see tavor_typedef.h). It encodes all the information necessary * to track the various resources needed to allocate, initialize, poll, resize, * and (later) free a completion queue (CQ). * * Specifically, it has a consumer index and a lock to ensure single threaded * access to it. It has pointers to the various resources allocated for the * completion queue, i.e. a CQC resource and the memory for the completion * queue itself. It has flags to indicate whether the CQ requires * ddi_dma_sync() ("cq_sync"). It also has a reference count and the number(s) * of the EQs to which it is associated (for success and for errors). * * Additionally, it has a pointer to the associated MR handle (for the mapped * queue memory) and a void pointer that holds the argument that should be * passed back to the IBTF when events are generated on the CQ. * * We also have the always necessary backpointer to the resource for the * CQ handle structure itself. But we also have pointers to the "Work Request * ID" processing lists (both the lock and the regular list, as well as the * head and tail for the "reapable" list). See tavor_wrid.c for more details. */ struct tavor_sw_cq_s { kmutex_t cq_lock; uint32_t cq_consindx; uint32_t cq_cqnum; tavor_hw_cqe_t *cq_buf; tavor_mrhdl_t cq_mrhdl; uint32_t cq_bufsz; uint_t cq_sync; uint_t cq_refcnt; uint32_t cq_eqnum; uint32_t cq_erreqnum; uint_t cq_is_special; uint_t cq_is_umap; uint32_t cq_uarpg; devmap_cookie_t cq_umap_dhp; tavor_rsrc_t *cq_cqcrsrcp; tavor_rsrc_t *cq_rsrcp; void *cq_hdlrarg; /* For Work Request ID processing */ kmutex_t cq_wrid_wqhdr_lock; avl_tree_t cq_wrid_wqhdr_avl_tree; tavor_wrid_list_hdr_t *cq_wrid_reap_head; tavor_wrid_list_hdr_t *cq_wrid_reap_tail; struct tavor_qalloc_info_s cq_cqinfo; }; _NOTE(READ_ONLY_DATA(tavor_sw_cq_s::cq_cqnum tavor_sw_cq_s::cq_eqnum tavor_sw_cq_s::cq_erreqnum tavor_sw_cq_s::cq_cqcrsrcp tavor_sw_cq_s::cq_rsrcp tavor_sw_cq_s::cq_hdlrarg tavor_sw_cq_s::cq_is_umap tavor_sw_cq_s::cq_uarpg)) _NOTE(DATA_READABLE_WITHOUT_LOCK(tavor_sw_cq_s::cq_bufsz tavor_sw_cq_s::cq_cqinfo)) _NOTE(MUTEX_PROTECTS_DATA(tavor_sw_cq_s::cq_lock, tavor_sw_cq_s::cq_consindx tavor_sw_cq_s::cq_buf tavor_sw_cq_s::cq_mrhdl tavor_sw_cq_s::cq_sync tavor_sw_cq_s::cq_refcnt tavor_sw_cq_s::cq_is_special tavor_sw_cq_s::cq_umap_dhp)) int tavor_cq_alloc(tavor_state_t *state, ibt_cq_hdl_t ibt_cqhdl, ibt_cq_attr_t *attr_p, uint_t *actual_size, tavor_cqhdl_t *cqhdl, uint_t sleepflag); int tavor_cq_free(tavor_state_t *state, tavor_cqhdl_t *cqhdl, uint_t sleepflag); int tavor_cq_resize(tavor_state_t *state, tavor_cqhdl_t cqhdl, uint_t req_size, uint_t *actual_size, uint_t sleepflag); int tavor_cq_notify(tavor_state_t *state, tavor_cqhdl_t cqhdl, ibt_cq_notify_flags_t flags); int tavor_cq_poll(tavor_state_t *state, tavor_cqhdl_t cqhdl, ibt_wc_t *wc_p, uint_t num_wc, uint_t *num_polled); int tavor_cq_handler(tavor_state_t *state, tavor_eqhdl_t eq, tavor_hw_eqe_t *eqe); int tavor_cq_err_handler(tavor_state_t *state, tavor_eqhdl_t eq, tavor_hw_eqe_t *eqe); int tavor_cq_refcnt_inc(tavor_cqhdl_t cq, uint_t is_special); void tavor_cq_refcnt_dec(tavor_cqhdl_t cq); tavor_cqhdl_t tavor_cqhdl_from_cqnum(tavor_state_t *state, uint_t cqnum); void tavor_cq_srq_entries_flush(tavor_state_t *state, tavor_qphdl_t qp); #ifdef __cplusplus } #endif #endif /* _SYS_IB_ADAPTERS_TAVOR_CQ_H */