/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2013 Garrett D'Amore * Copyright 2016 Joyent, Inc. * Copyright 2022 Oxide Computer Company * * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _SYS_FEATURE_TESTS_H #define _SYS_FEATURE_TESTS_H #include #include #ifdef __cplusplus extern "C" { #endif /* * Values of _POSIX_C_SOURCE * * undefined not a POSIX compilation * 1 POSIX.1-1990 compilation * 2 POSIX.2-1992 compilation * 199309L POSIX.1b-1993 compilation (Real Time) * 199506L POSIX.1c-1995 compilation (POSIX Threads) * 200112L POSIX.1-2001 compilation (Austin Group Revision) * 200809L POSIX.1-2008 compilation */ #if defined(_POSIX_SOURCE) && !defined(_POSIX_C_SOURCE) #define _POSIX_C_SOURCE 1 #endif /* * The feature test macros __XOPEN_OR_POSIX, _STRICT_STDC, _STRICT_SYMBOLS, * and _STDC_C99 are Sun implementation specific macros created in order to * compress common standards specified feature test macros for easier reading. * These macros should not be used by the application developer as * unexpected results may occur. Instead, the user should reference * standards(7) for correct usage of the standards feature test macros. * * __XOPEN_OR_POSIX Used in cases where a symbol is defined by both * X/Open or POSIX or in the negative, when neither * X/Open or POSIX defines a symbol. * * _STRICT_STDC __STDC__ is specified by the C Standards and defined * by the compiler. For Sun compilers the value of * __STDC__ is either 1, 0, or not defined based on the * compilation mode (see cc(1)). When the value of * __STDC__ is 1 and in the absence of any other feature * test macros, the namespace available to the application * is limited to only those symbols defined by the C * Standard. _STRICT_STDC provides a more readable means * of identifying symbols defined by the standard, or in * the negative, symbols that are extensions to the C * Standard. See additional comments for GNU C differences. * * _STDC_C99 __STDC_VERSION__ is specified by the C standards and * defined by the compiler and indicates the version of * the C standard. A value of 199901L indicates a * compiler that complies with ISO/IEC 9899:1999, other- * wise known as the C99 standard. * * _STDC_C11 Like _STDC_C99 except that the value of __STDC_VERSION__ * is 201112L indicating a compiler that compiles with * ISO/IEC 9899:2011, otherwise known as the C11 standard. * * _STRICT_SYMBOLS Used in cases where symbol visibility is restricted * by the standards, and the user has not explicitly * relaxed the strictness via __EXTENSIONS__. */ #if defined(_XOPEN_SOURCE) || defined(_POSIX_C_SOURCE) #define __XOPEN_OR_POSIX #endif /* * ISO/IEC 9899:1990 and it's revisions, ISO/IEC 9899:1999 and ISO/IEC * 99899:2011 specify the following predefined macro name: * * __STDC__ The integer constant 1, intended to indicate a conforming * implementation. * * Furthermore, a strictly conforming program shall use only those features * of the language and library specified in these standards. A conforming * implementation shall accept any strictly conforming program. * * Based on these requirements, Sun's C compiler defines __STDC__ to 1 for * strictly conforming environments and __STDC__ to 0 for environments that * use ANSI C semantics but allow extensions to the C standard. For non-ANSI * C semantics, Sun's C compiler does not define __STDC__. * * The GNU C project interpretation is that __STDC__ should always be defined * to 1 for compilation modes that accept ANSI C syntax regardless of whether * or not extensions to the C standard are used. Violations of conforming * behavior are conditionally flagged as warnings via the use of the * -pedantic option. In addition to defining __STDC__ to 1, the GNU C * compiler also defines __STRICT_ANSI__ as a means of specifying strictly * conforming environments using the -ansi or -std= options. * * In the absence of any other compiler options, Sun and GNU set the value * of __STDC__ as follows when using the following options: * * Value of __STDC__ __STRICT_ANSI__ * * cc -Xa (default) 0 undefined * cc -Xt (transitional) 0 undefined * cc -Xc (strictly conforming) 1 undefined * cc -Xs (K&R C) undefined undefined * * gcc (default) 1 undefined * gcc -ansi, -std={c89, c99,...) 1 defined * gcc -traditional (K&R) undefined undefined * * The default compilation modes for Sun C compilers versus GNU C compilers * results in a differing value for __STDC__ which results in a more * restricted namespace when using Sun compilers. To allow both GNU and Sun * interpretations to peacefully co-exist, we use the following Sun * implementation _STRICT_STDC_ macro: */ #if (__STDC__ - 0 == 1 && !defined(__GNUC__)) || \ (defined(__GNUC__) && defined(__STRICT_ANSI__)) #define _STRICT_STDC #else #undef _STRICT_STDC #endif /* * Compiler complies with ISO/IEC 9899:1999 or ISO/IEC 9989:2011 */ #if __STDC_VERSION__ - 0 >= 201112L #define _STDC_C11 #endif #if __STDC_VERSION__ - 0 >= 199901L #define _STDC_C99 #endif /* * Use strict symbol visibility. */ #if (defined(_STRICT_STDC) || defined(__XOPEN_OR_POSIX)) && \ !defined(__EXTENSIONS__) #define _STRICT_SYMBOLS #endif /* * This is a variant of _STRICT_SYMBOLS that is meant to cover headers that are * governed by POSIX, but have not been governed by ISO C. One can go two ways * on what should happen if an application actively includes (not transitively) * a header that isn't part of the ISO C spec, we opt to say that if someone has * gone out of there way then they're doing it for a reason and that is an act * of non-compliance and therefore it's not up to us to hide away every symbol. * * In general, prefer using _STRICT_SYMBOLS, but this is here in particular for * cases where in the past we have only used a POSIX related check and we don't * wish to make something stricter. Often applications are relying on the * ability to, or more realistically unwittingly, have _STRICT_STDC declared and * still use these interfaces. */ #if (defined(__XOPEN_OR_POSIX) && !defined(__EXTENSIONS__)) #define _STRICT_POSIX #endif /* * Large file interfaces: * * _LARGEFILE_SOURCE * 1 large file-related additions to POSIX * interfaces requested (fseeko, etc.) * _LARGEFILE64_SOURCE * 1 transitional large-file-related interfaces * requested (seek64, stat64, etc.) * * The corresponding announcement macros are respectively: * _LFS_LARGEFILE * _LFS64_LARGEFILE * (These are set in .) * * Requesting _LARGEFILE64_SOURCE implies requesting _LARGEFILE_SOURCE as * well. * * The large file interfaces are made visible regardless of the initial values * of the feature test macros under certain circumstances: * - If no explicit standards-conforming environment is requested (neither * of _POSIX_SOURCE nor _XOPEN_SOURCE is defined and the value of * __STDC__ does not imply standards conformance). * - Extended system interfaces are explicitly requested (__EXTENSIONS__ * is defined). * - Access to in-kernel interfaces is requested (_KERNEL or _KMEMUSER is * defined). (Note that this dependency is an artifact of the current * kernel implementation and may change in future releases.) */ #if (!defined(_STRICT_STDC) && !defined(__XOPEN_OR_POSIX)) || \ defined(_KERNEL) || defined(_KMEMUSER) || \ defined(__EXTENSIONS__) #undef _LARGEFILE64_SOURCE #define _LARGEFILE64_SOURCE 1 #endif #if _LARGEFILE64_SOURCE - 0 == 1 #undef _LARGEFILE_SOURCE #define _LARGEFILE_SOURCE 1 #endif /* * Large file compilation environment control: * * The setting of _FILE_OFFSET_BITS controls the size of various file-related * types and governs the mapping between file-related source function symbol * names and the corresponding binary entry points. * * In the 32-bit environment, the default value is 32; if not set, set it to * the default here, to simplify tests in other headers. * * In the 64-bit compilation environment, the only value allowed is 64. */ #if defined(_LP64) #ifndef _FILE_OFFSET_BITS #define _FILE_OFFSET_BITS 64 #endif #if _FILE_OFFSET_BITS - 0 != 64 #error "invalid _FILE_OFFSET_BITS value specified" #endif #else /* _LP64 */ #ifndef _FILE_OFFSET_BITS #define _FILE_OFFSET_BITS 32 #endif #if _FILE_OFFSET_BITS - 0 != 32 && _FILE_OFFSET_BITS - 0 != 64 #error "invalid _FILE_OFFSET_BITS value specified" #endif #endif /* _LP64 */ /* * Use of _XOPEN_SOURCE * * The following X/Open specifications are supported: * * X/Open Portability Guide, Issue 3 (XPG3) * X/Open CAE Specification, Issue 4 (XPG4) * X/Open CAE Specification, Issue 4, Version 2 (XPG4v2) * X/Open CAE Specification, Issue 5 (XPG5) * Open Group Technical Standard, Issue 6 (XPG6), also referred to as * IEEE Std. 1003.1-2001 and ISO/IEC 9945:2002. * Open Group Technical Standard, Issue 7 (XPG7), also referred to as * IEEE Std. 1003.1-2008 and ISO/IEC 9945:2009. * * XPG4v2 is also referred to as UNIX 95 (SUS or SUSv1). * XPG5 is also referred to as UNIX 98 or the Single Unix Specification, * Version 2 (SUSv2) * XPG6 is the result of a merge of the X/Open and POSIX specifications * and as such is also referred to as IEEE Std. 1003.1-2001 in * addition to UNIX 03 and SUSv3. * XPG7 is also referred to as UNIX 08 and SUSv4. * * When writing a conforming X/Open application, as per the specification * requirements, the appropriate feature test macros must be defined at * compile time. These are as follows. For more info, see standards(7). * * Feature Test Macro Specification * ------------------------------------------------ ------------- * _XOPEN_SOURCE XPG3 * _XOPEN_SOURCE && _XOPEN_VERSION = 4 XPG4 * _XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED = 1 XPG4v2 * _XOPEN_SOURCE = 500 XPG5 * _XOPEN_SOURCE = 600 (or POSIX_C_SOURCE=200112L) XPG6 * _XOPEN_SOURCE = 700 (or POSIX_C_SOURCE=200809L) XPG7 * * In order to simplify the guards within the headers, the following * implementation private test macros have been created. Applications * must NOT use these private test macros as unexpected results will * occur. * * Note that in general, the use of these private macros is cumulative. * For example, the use of _XPG3 with no other restrictions on the X/Open * namespace will make the symbols visible for XPG3 through XPG6 * compilation environments. The use of _XPG4_2 with no other X/Open * namespace restrictions indicates that the symbols were introduced in * XPG4v2 and are therefore visible for XPG4v2 through XPG6 compilation * environments, but not for XPG3 or XPG4 compilation environments. * * _XPG3 X/Open Portability Guide, Issue 3 (XPG3) * _XPG4 X/Open CAE Specification, Issue 4 (XPG4) * _XPG4_2 X/Open CAE Specification, Issue 4, Version 2 (XPG4v2/UNIX 95/SUS) * _XPG5 X/Open CAE Specification, Issue 5 (XPG5/UNIX 98/SUSv2) * _XPG6 Open Group Technical Standard, Issue 6 (XPG6/UNIX 03/SUSv3) * _XPG7 Open Group Technical Standard, Issue 7 (XPG7/UNIX 08/SUSv4) */ /* X/Open Portability Guide, Issue 3 */ #if defined(_XOPEN_SOURCE) && (_XOPEN_SOURCE - 0 < 500) && \ (_XOPEN_VERSION - 0 < 4) && !defined(_XOPEN_SOURCE_EXTENDED) #define _XPG3 /* X/Open CAE Specification, Issue 4 */ #elif (defined(_XOPEN_SOURCE) && _XOPEN_VERSION - 0 == 4) #define _XPG4 #define _XPG3 /* X/Open CAE Specification, Issue 4, Version 2 */ #elif (defined(_XOPEN_SOURCE) && _XOPEN_SOURCE_EXTENDED - 0 == 1) #define _XPG4_2 #define _XPG4 #define _XPG3 /* X/Open CAE Specification, Issue 5 */ #elif (_XOPEN_SOURCE - 0 == 500) #define _XPG5 #define _XPG4_2 #define _XPG4 #define _XPG3 #undef _POSIX_C_SOURCE #define _POSIX_C_SOURCE 199506L /* Open Group Technical Standard , Issue 6 */ #elif (_XOPEN_SOURCE - 0 == 600) || (_POSIX_C_SOURCE - 0 == 200112L) #define _XPG6 #define _XPG5 #define _XPG4_2 #define _XPG4 #define _XPG3 #undef _POSIX_C_SOURCE #define _POSIX_C_SOURCE 200112L #undef _XOPEN_SOURCE #define _XOPEN_SOURCE 600 /* Open Group Technical Standard, Issue 7 */ #elif (_XOPEN_SOURCE - 0 == 700) || (_POSIX_C_SOURCE - 0 == 200809L) #define _XPG7 #define _XPG6 #define _XPG5 #define _XPG4_2 #define _XPG4 #define _XPG3 #undef _POSIX_C_SOURCE #define _POSIX_C_SOURCE 200809L #undef _XOPEN_SOURCE #define _XOPEN_SOURCE 700 #endif /* * _XOPEN_VERSION is defined by the X/Open specifications and is not * normally defined by the application, except in the case of an XPG4 * application. On the implementation side, _XOPEN_VERSION defined with * the value of 3 indicates an XPG3 application. _XOPEN_VERSION defined * with the value of 4 indicates an XPG4 or XPG4v2 (UNIX 95) application. * _XOPEN_VERSION defined with a value of 500 indicates an XPG5 (UNIX 98) * application and with a value of 600 indicates an XPG6 (UNIX 03) * application and with a value of 700 indicates an XPG7 (UNIX 08). * The appropriate version is determined by the use of the * feature test macros described earlier. The value of _XOPEN_VERSION * defaults to 3 otherwise indicating support for XPG3 applications. */ #ifndef _XOPEN_VERSION #if defined(_XPG7) #define _XOPEN_VERSION 700 #elif defined(_XPG6) #define _XOPEN_VERSION 600 #elif defined(_XPG5) #define _XOPEN_VERSION 500 #elif defined(_XPG4_2) #define _XOPEN_VERSION 4 #else #define _XOPEN_VERSION 3 #endif #endif /* * ANSI C and ISO 9899:1990 say the type long long doesn't exist in strictly * conforming environments. ISO 9899:1999 says it does. * * The presence of _LONGLONG_TYPE says "long long exists" which is therefore * defined in all but strictly conforming environments that disallow it. */ #if !defined(_STDC_C99) && defined(_STRICT_STDC) && !defined(__GNUC__) /* * Resist attempts to force the definition of long long in this case. */ #if defined(_LONGLONG_TYPE) #error "No long long in strictly conforming ANSI C & 1990 ISO C environments" #endif #else #if !defined(_LONGLONG_TYPE) #define _LONGLONG_TYPE #endif #endif /* * The following macro defines a value for the ISO C99 restrict * keyword so that _RESTRICT_KYWD resolves to "restrict" if * an ISO C99 compiler is used, "__restrict" for c++ and "" (null string) * if any other compiler is used. This allows for the use of single * prototype declarations regardless of compiler version. */ #if (defined(__STDC__) && defined(_STDC_C99)) #ifdef __cplusplus #define _RESTRICT_KYWD __restrict #else /* * NOTE: The whitespace between the '#' and 'define' is significant. * It foils gcc's fixincludes from defining a redundant 'restrict'. */ /* CSTYLED */ # define _RESTRICT_KYWD restrict #endif #else #define _RESTRICT_KYWD #endif /* * The following macro defines a value for the ISO C11 _Noreturn * keyword so that _NORETURN_KYWD resolves to "_Noreturn" if * an ISO C11 compiler is used and "" (null string) if any other * compiler is used. This allows for the use of single prototype * declarations regardless of compiler version. */ #if (defined(__STDC__) && defined(_STDC_C11)) && !defined(__cplusplus) #define _NORETURN_KYWD _Noreturn #else #define _NORETURN_KYWD #endif /* ISO/IEC 9899:2011 Annex K */ #if defined(__STDC_WANT_LIB_EXT1__) #if __STDC_WANT_LIB_EXT1__ #define __EXT1_VISIBLE 1 #else #define __EXT1_VISIBLE 0 #endif #else #define __EXT1_VISIBLE 0 #endif /* __STDC_WANT_LIB_EXT1__ */ /* * The following macro indicates header support for the ANSI C++ * standard. The ISO/IEC designation for this is ISO/IEC FDIS 14882. */ #define _ISO_CPP_14882_1998 /* * The following macro indicates header support for the C99 standard, * ISO/IEC 9899:1999, Programming Languages - C. */ #define _ISO_C_9899_1999 /* * The following macro indicates header support for the C11 standard, * ISO/IEC 9899:2011, Programming Languages - C. */ #define _ISO_C_9899_2011 /* * The following macro indicates header support for the C11 standard, * ISO/IEC 9899:2011 Annex K, Programming Languages - C. */ #undef __STDC_LIB_EXT1__ /* * The following macro indicates header support for DTrace. The value is an * integer that corresponds to the major version number for DTrace. */ #define _DTRACE_VERSION 1 #ifdef __cplusplus } #endif #endif /* _SYS_FEATURE_TESTS_H */