/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, Version 1.0 only * (the "License"). You may not use this file except in compliance * with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 1995,1997-1998 by Sun Microsystems, Inc. * All rights reserved. */ #ifndef _SYS_FC4_FC_H #define _SYS_FC4_FC_H #pragma ident "%Z%%M% %I% %E% SMI" #ifdef __cplusplus extern "C" { #endif /* * Fibre Channel Physical and Signaling Interface (FC-PH) definitions. * * NOTE: modifications of this file affect drivers, mpsas models, PLUTO * firmware, SOC assembly code. Please be communicative. */ #define FC_PH_VERSION 0x06 /* 0x06 means 4.0 ! */ #define MAX_FRAME_SIZE 2112 /* maximum size of frame payload */ /* * This is the standard frame header for FC-PH frames. */ typedef struct FC2_FRAME_HDR { uint_t r_ctl:8, d_id:24; uint_t reserved1:8, s_id:24; uint_t type:8, f_ctl:24; uint_t seq_id:8, df_ctl:8, seq_cnt:16; ushort_t ox_id, rx_id; uint_t ro; }aFC2_FRAME_HDR, *FC2_FRAME_HDRptr, fc_frame_header_t; #define WE_ARE_ORIGINATOR(fh) (fh->f_ctl & F_CTL_XCHG_CONTEXT) #define UNSOLICITED_FRAME(fh) (fh->rx_id == 0xffff) #define FIRST_SEQUENCE(fh) (fh->f_ctl & F_CTL_FIRST_SEQ) #define LAST_FRAME_OF_SEQUENCE(fh) (fh->f_ctl & F_CTL_END_SEQ) #define LAST_SEQUENCE_OF_EXCHANGE(fh) (fh->f_ctl & F_CTL_LAST_SEQ) #define TRANSFER_INITIATIVE(fh) (fh->f_ctl & F_CTL_SEQ_INITIATIVE) /* legal values for r_ctl */ #define R_CTL_ROUTING 0xf0 /* mask for routing bits */ #define R_CTL_INFO 0x0f /* mask for information bits */ #define R_CTL_DEVICE_DATA 0x00 /* all I/O related frames */ #define R_CTL_EXTENDED_SVC 0x20 /* extended link services (PLOGI) */ #define R_CTL_FC4_SVC 0x30 /* FC-4 link services (FCP_LOGI) */ #define R_CTL_VIDEO_BUFF 0x40 /* not yet defined */ #define R_CTL_BASIC_SVC 0x80 /* basic link services (NOP) */ #define R_CTL_LINK_CTL 0xc0 /* ACKs, etc. */ /* legal values for r_ctl: Device Data */ #define R_CTL_UNCATEGORIZED 0x00 #define R_CTL_SOLICITED_DATA 0x01 #define R_CTL_UNSOL_CONTROL 0x02 #define R_CTL_SOLICITED_CONTROL 0x03 #define R_CTL_UNSOL_DATA 0x04 #define R_CTL_XFER_RDY 0x05 #define R_CTL_COMMAND 0x06 #define R_CTL_STATUS 0x07 /* legal values for r_ctl: Basic Link Services, type 0 */ #define R_CTL_LS_NOP 0x80 #define R_CTL_LS_ABTS 0x81 #define R_CTL_LS_RMC 0x82 #define R_CTL_LS_BA_ACC 0x84 #define R_CTL_LS_BA_RJT 0x85 /* legal values for r_ctl: Extended Link Services, type 1 */ #define R_CTL_ELS_REQ 0x22 #define R_CTL_ELS_RSP 0x23 /* Extended Link Service command codes, type 1 */ #define LS_RJT 0x01000000 #define LS_ACC 0x02000000 #define LS_PLOGI 0x03000000 #define LS_FLOGI 0x04000000 #define LS_LOGO 0x05000000 #define LS_ABTX 0x06000000 #define LS_RCS 0x07000000 #define LS_RES 0x08000000 #define LS_RSS 0x09000000 #define LS_RSI 0x0a000000 #define LS_ESTS 0x0b000000 #define LS_ESTC 0x0c000000 #define LS_ADVC 0x0d000000 #define LS_RTV 0x0e000000 #define LS_RLS 0x0f000000 #define LS_ECHO 0x10000000 #define LS_TEST 0x11000000 #define LS_RRQ 0x12000000 #define LS_IDENT 0x20000000 /* vendor unique */ #define LS_DISPLAY 0x21000000 /* vendor unique */ /* legal values for r_ctl: Link Control */ #define R_CTL_ACK_1 0xc0 #define R_CTL_ACK_N 0xc1 #define R_CTL_P_RJT 0xc2 #define R_CTL_F_RJT 0xc3 #define R_CTL_P_BSY 0xc4 #define R_CTL_F_BSY_DF 0xc5 #define R_CTL_F_BSY_LC 0xc6 #define R_CTL_LCR 0xc7 /* type field definitions for Link Data frames: */ #define TYPE_BASIC_LS 0x00 #define TYPE_EXTENDED_LS 0x01 /* type field definitions for Device Data frames (from FC-PH 4.1): */ #define TYPE_IS8802 0x04 #define TYPE_IS8802_SNAP 0x05 #define TYPE_SCSI_FCP 0x08 /* we use this one */ #define TYPE_SCSI_GPP 0x09 #define TYPE_HIPP_FP 0x0a #define TYPE_IPI3_MASTER 0x11 #define TYPE_IPI3_SLAVE 0x12 #define TYPE_IPI3_PEER 0x13 #define F_CTL_XCHG_CONTEXT 0x800000 /* 0 if SID is XCHG originator */ #define F_CTL_SEQ_CONTEXT 0x400000 /* 0 if SID is SEQ initiator */ #define F_CTL_FIRST_SEQ 0x200000 /* 1 if first sequence of XCHG */ #define F_CTL_LAST_SEQ 0x100000 /* 1 if last SEQ of XCHG */ #define F_CTL_END_SEQ 0x080000 /* 1 if last frame of a SEQ */ #define F_CTL_END_CONNECT 0x040000 /* always 0 */ #define F_CTL_CHAINED_SEQ 0x020000 /* always 0 */ #define F_CTL_SEQ_INITIATIVE 0x010000 /* when 1 xfrs SEQ initiative */ #define F_CTL_XID_REASSIGNED 0x008000 /* always 0 */ #define F_CTL_INVALIDATE_XID 0x004000 /* always 0 */ #define F_CTL_CONTINUE_SEQ 0x0000C0 /* always 0 */ #define F_CTL_ABORT_SEQ 0x000030 /* always 0 */ #define F_CTL_RO_PRESENT 0x000008 /* 1 if param field == RO */ #define F_CTL_XCHG_REASSEMBLE 0x000004 /* always 0 */ #define F_CTL_FILL_BYTES 0x000003 /* # of fill bytes in this frame */ #define F_CTL_RESERVED 0x003F00 #define F_CTL_ALWAYS_ZERO (F_CTL_RESERVED | F_CTL_XCHG_REASSEMBLE | \ F_CTL_ABORT_SEQ | F_CTL_CONTINUE_SEQ| F_CTL_INVALIDATE_XID | \ F_CTL_XID_REASSIGNED | F_CTL_CHAINED_SEQ | F_CTL_END_CONNECT) /* Well known addresses ... */ #define FS_GENERAL_MULTICAST 0xfffff7 #define FS_WELL_KNOWN_MULTICAST 0xfffff8 #define FS_HUNT_GROUP 0xfffff9 #define FS_MANAGEMENT_SERVER 0xfffffa #define FS_TIME_SERVER 0xfffffb #define FS_NAME_SERVER 0xfffffc #define FS_FABRIC_CONTROLLER 0xfffffd #define FS_FABRIC_F_PORT 0xfffffe #define FS_BROADCAST 0xffffff /* Fabric Busy Reason Codes */ #define FABRIC_BUSY 0x01 #define NPORT_BUSY 0x03 /* NPort Busy Reason Codes */ #define PHYSICAL_BUSY 0x01 #define RESOURSE_BUSY 0x03 /* Reject Reason Codes */ typedef struct FC2_RJT_PARAM { uchar_t rjt_action; uchar_t rjt_reason; uchar_t reserved[2]; } aFC2_RJT_PARAM; #define INVALID_D_ID 0x01 #define INVALID_S_ID 0x02 #define NPORT_NOT_AVAIL_TEMP 0x03 #define NPORT_NOT_AVAIL_PERM 0x04 #define CLASS_NOT_SUPPORTED 0x05 #define DELIMITER_ERROR 0x06 #define TYPE_NOT_SUPPORTED 0x07 #define INVALID_LINK_CONTROL 0x08 #define INVALID_R_CTL 0x09 #define INVALID_F_CTL 0x0a #define INVALID_OX_ID 0x0b #define INVALID_RX_ID 0x0c #define INVALID_SEQ_ID 0x0d #define INVALID_DF_CTL 0x0e #define INVALID_SEQ_CNT 0x0f #define INVALID_PARAMETER 0x10 #define EXCHANGE_ERROR 0x11 #define PROTOCOL_ERROR 0x12 #define INCORRECT_LENGTH 0x13 #define UNEXPECTED_ACK 0x14 #define UNEXPECTED_LINK_RESP 0x15 #define LOGIN_REQUIRED 0x16 #define EXCESSIVE_SEQUENCES 0x17 #define CANT_ESTABLISH_EXCHANGE 0x18 #define SECURITY_NOT_SUPPORTED 0x19 /* BA_RJT and LS_RJT reason codes */ #define RJT_INVALID_CMD_CODE 0x01 #define RJT_LOGICAL_ERROR 0x03 #define RJT_LOGICAL_BUSY 0x05 #define RJT_PROTOCOL_ERR 0x07 #define RJT_CANT_PERFORM_RQST 0x09 #define RJT_CMD_NOT_SUPPORTED 0x0b /* * Frame Payloads that the SOC understands * Transfer Ready: */ typedef struct Xfer_Rdy { int seq_ro; int burst_len; int reserved; } aXFER_RDY, *XFER_RDYptr; /* * Link Error Status Block */ typedef struct LA_RLS_reply { int code; int link_failure; int loss_of_sync; int loss_of_signal; int primitive_error; int code_violations; int invalid_crc; } aLA_RLS_reply, *LA_RLS_replyptr; /* * Login */ typedef struct LOGI_PAYLOAD { uint_t code; uchar_t common_service_params[16]; uchar_t port_name[8]; uchar_t node_name[8]; uchar_t class1_service_params[16]; uchar_t class2_service_params[16]; uchar_t class3_service_params[16]; } aLOGI_PAYLOAD, *LOGI_PAYLOADptr; #define SP_F_PORT_LOGIN 0x10 /* * Extended Link Service Payload */ /* Arbitrary upper limit for now... */ #define FC_MAX_ELS (60-4) typedef struct ELS_payload { union els_cmd_u { struct { uchar_t ls_command; uchar_t reserved[3]; } c; uint_t i; } els_cmd; uchar_t els_data[FC_MAX_ELS]; } els_payload_t; /* * NOTE: This dataseg definition makes this file unique * from the Pluto fc_ph file. */ /* * Data segment definition */ typedef struct fc_dataseg { uint32_t fc_base; /* Address of buffer. */ uint32_t fc_count; /* Length of buffer. */ } fc_dataseg_t; #ifdef __cplusplus } #endif #endif /* !_SYS_FC4_FC_H */