/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 1982, 2010, Oracle and/or its affiliates. All rights reserved. * * Copyright 2017 Nexenta Systems, Inc. All rights reserved. * Copyright 2012 DEY Storage Systems, Inc. All rights reserved. */ #ifndef _SYS_DKIO_H #define _SYS_DKIO_H #include /* Needed for NDKMAP define */ #ifdef __cplusplus extern "C" { #endif /* * Structures and definitions for disk io control commands */ /* * Structures used as data by ioctl calls. */ #define DK_DEVLEN 16 /* device name max length, including */ /* unit # & NULL (ie - "xyc1") */ /* * Used for controller info */ struct dk_cinfo { char dki_cname[DK_DEVLEN]; /* controller name (no unit #) */ ushort_t dki_ctype; /* controller type */ ushort_t dki_flags; /* flags */ ushort_t dki_cnum; /* controller number */ uint_t dki_addr; /* controller address */ uint_t dki_space; /* controller bus type */ uint_t dki_prio; /* interrupt priority */ uint_t dki_vec; /* interrupt vector */ char dki_dname[DK_DEVLEN]; /* drive name (no unit #) */ uint_t dki_unit; /* unit number */ uint_t dki_slave; /* slave number */ ushort_t dki_partition; /* partition number */ ushort_t dki_maxtransfer; /* max. transfer size in DEV_BSIZE */ }; /* * Controller types */ #define DKC_UNKNOWN 0 #define DKC_CDROM 1 /* CD-ROM, SCSI or otherwise */ #define DKC_WDC2880 2 #define DKC_XXX_0 3 /* unassigned */ #define DKC_XXX_1 4 /* unassigned */ #define DKC_DSD5215 5 #define DKC_ACB4000 7 #define DKC_MD21 8 #define DKC_XXX_2 9 /* unassigned */ #define DKC_NCRFLOPPY 10 #define DKC_SMSFLOPPY 12 #define DKC_SCSI_CCS 13 /* SCSI CCS compatible */ #define DKC_INTEL82072 14 /* native floppy chip */ #define DKC_MD 16 /* meta-disk (virtual-disk) driver (obsolete) */ #define DKC_INTEL82077 19 /* 82077 floppy disk controller */ #define DKC_DIRECT 20 /* Intel direct attached device i.e. IDE */ #define DKC_PCMCIA_MEM 21 /* PCMCIA memory disk-like type (Obsolete) */ #define DKC_PCMCIA_ATA 22 /* PCMCIA AT Attached type */ #define DKC_VBD 23 /* virtual block device */ #define DKC_BLKDEV 24 /* generic block device (see blkdev(7d)) */ /* * Sun reserves up through 1023 */ #define DKC_CUSTOMER_BASE 1024 /* * Flags */ #define DKI_BAD144 0x01 /* use DEC std 144 bad sector fwding */ #define DKI_MAPTRK 0x02 /* controller does track mapping */ #define DKI_FMTTRK 0x04 /* formats only full track at a time */ #define DKI_FMTVOL 0x08 /* formats only full volume at a time */ #define DKI_FMTCYL 0x10 /* formats only full cylinders at a time */ #define DKI_HEXUNIT 0x20 /* unit number is printed as 3 hex digits */ #define DKI_PCMCIA_PFD 0x40 /* PCMCIA pseudo-floppy memory card */ /* * Used for all partitions */ struct dk_allmap { struct dk_map dka_map[NDKMAP]; }; #if defined(_SYSCALL32) struct dk_allmap32 { struct dk_map32 dka_map[NDKMAP]; }; #endif /* _SYSCALL32 */ /* * Definition of a disk's geometry */ struct dk_geom { unsigned short dkg_ncyl; /* # of data cylinders */ unsigned short dkg_acyl; /* # of alternate cylinders */ unsigned short dkg_bcyl; /* cyl offset (for fixed head area) */ unsigned short dkg_nhead; /* # of heads */ unsigned short dkg_obs1; /* obsolete */ unsigned short dkg_nsect; /* # of data sectors per track */ unsigned short dkg_intrlv; /* interleave factor */ unsigned short dkg_obs2; /* obsolete */ unsigned short dkg_obs3; /* obsolete */ unsigned short dkg_apc; /* alternates per cyl (SCSI only) */ unsigned short dkg_rpm; /* revolutions per minute */ unsigned short dkg_pcyl; /* # of physical cylinders */ unsigned short dkg_write_reinstruct; /* # sectors to skip, writes */ unsigned short dkg_read_reinstruct; /* # sectors to skip, reads */ unsigned short dkg_extra[7]; /* for compatible expansion */ }; /* * These defines are for historic compatibility with old drivers. */ #define dkg_bhead dkg_obs1 /* used to be head offset */ #define dkg_gap1 dkg_obs2 /* used to be gap1 */ #define dkg_gap2 dkg_obs3 /* used to be gap2 */ /* * Disk io control commands * Warning: some other ioctls with the DIOC prefix exist elsewhere. * The Generic DKIOC numbers are from 0 - 50. * The Floppy Driver uses 51 - 100. * The Hard Disk (except SCSI) 101 - 106. (these are obsolete) * The CDROM Driver 151 - 200. * The USCSI ioctl 201 - 250. */ #define DKIOC (0x04 << 8) /* * The following ioctls are generic in nature and need to be * suported as appropriate by all disk drivers */ #define DKIOCGGEOM (DKIOC|1) /* Get geometry */ #define DKIOCINFO (DKIOC|3) /* Get info */ #define DKIOCEJECT (DKIOC|6) /* Generic 'eject' */ #define DKIOCGVTOC (DKIOC|11) /* Get VTOC */ #define DKIOCSVTOC (DKIOC|12) /* Set VTOC & Write to Disk */ #define DKIOCGEXTVTOC (DKIOC|23) /* Get extended VTOC */ #define DKIOCSEXTVTOC (DKIOC|24) /* Set extended VTOC, Write to Disk */ /* * Disk Cache Controls. These ioctls should be supported by * all disk drivers. * * DKIOCFLUSHWRITECACHE when used from user-mode ignores the ioctl * argument, but it should be passed as NULL to allow for future * reinterpretation. From user-mode, this ioctl request is synchronous. * * When invoked from within the kernel, the arg can be NULL to indicate * a synchronous request or can be the address of a struct dk_callback * to request an asynchronous callback when the flush request is complete. * In this case, the flag to the ioctl must include FKIOCTL and the * dkc_callback field of the pointed to struct must be non-null or the * request is made synchronously. * * In the callback case: if the ioctl returns 0, a callback WILL be performed. * If the ioctl returns non-zero, a callback will NOT be performed. * NOTE: In some cases, the callback may be done BEFORE the ioctl call * returns. The caller's locking strategy should be prepared for this case. */ #define DKIOCFLUSHWRITECACHE (DKIOC|34) /* flush cache to phys medium */ struct dk_callback { void (*dkc_callback)(void *dkc_cookie, int error); void *dkc_cookie; int dkc_flag; }; /* bit flag definitions for dkc_flag */ #define FLUSH_VOLATILE 0x1 /* Bit 0: if set, only flush */ /* volatile cache; otherwise, flush */ /* volatile and non-volatile cache */ #define DKIOCGETWCE (DKIOC|36) /* Get current write cache */ /* enablement status */ #define DKIOCSETWCE (DKIOC|37) /* Enable/Disable write cache */ /* * The following ioctls are used by Sun drivers to communicate * with their associated format routines. Support of these ioctls * is not required of foreign drivers */ #define DKIOCSGEOM (DKIOC|2) /* Set geometry */ #define DKIOCSAPART (DKIOC|4) /* Set all partitions */ #define DKIOCGAPART (DKIOC|5) /* Get all partitions */ #define DKIOCG_PHYGEOM (DKIOC|32) /* get physical geometry */ #define DKIOCG_VIRTGEOM (DKIOC|33) /* get virtual geometry */ /* * The following ioctl's are removable media support */ #define DKIOCLOCK (DKIOC|7) /* Generic 'lock' */ #define DKIOCUNLOCK (DKIOC|8) /* Generic 'unlock' */ #define DKIOCSTATE (DKIOC|13) /* Inquire insert/eject state */ #define DKIOCREMOVABLE (DKIOC|16) /* is media removable */ /* * ioctl for hotpluggable devices */ #define DKIOCHOTPLUGGABLE (DKIOC|35) /* is hotpluggable */ #if defined(__i386) || defined(__amd64) /* ioctl to write extended partition structure into the disk */ #define DKIOCSETEXTPART (DKIOC|46) #endif /* ioctl to report whether the disk is solid state or not - used for ZFS */ #define DKIOCSOLIDSTATE (DKIOC|38) /* * Ioctl to force driver to re-read the alternate partition and rebuild * the internal defect map. */ #define DKIOCADDBAD (DKIOC|20) /* Re-read the alternate map (IDE) */ #define DKIOCGETDEF (DKIOC|21) /* read defect list (IDE) */ /* * Used by applications to get disk defect information from IDE * drives. */ #ifdef _SYSCALL32 struct defect_header32 { int head; caddr32_t buffer; }; #endif /* _SYSCALL32 */ struct defect_header { int head; caddr_t buffer; }; #define DKIOCPARTINFO (DKIOC|22) /* Get partition or slice parameters */ #define DKIOCEXTPARTINFO (DKIOC|19) /* Get extended partition or slice */ /* parameters */ /* * Used by applications to get partition or slice information */ #ifdef _SYSCALL32 struct part_info32 { daddr32_t p_start; int p_length; }; #endif /* _SYSCALL32 */ struct part_info { daddr_t p_start; int p_length; }; struct extpart_info { diskaddr_t p_start; diskaddr_t p_length; }; /* The following ioctls are for Optical Memory Device */ #define DKIOC_EBP_ENABLE (DKIOC|40) /* enable by pass erase on write */ #define DKIOC_EBP_DISABLE (DKIOC|41) /* disable by pass erase on write */ /* * This state enum is the argument passed to the DKIOCSTATE ioctl. */ enum dkio_state { DKIO_NONE, DKIO_EJECTED, DKIO_INSERTED, DKIO_DEV_GONE }; #define DKIOCGMEDIAINFO (DKIOC|42) /* get information about the media */ /* * ioctls to read/write mboot info. */ #define DKIOCGMBOOT (DKIOC|43) /* get mboot info */ #define DKIOCSMBOOT (DKIOC|44) /* set mboot info */ /* * ioctl to get the device temperature. */ #define DKIOCGTEMPERATURE (DKIOC|45) /* get temperature */ /* * ioctl to get the media info including physical block size */ #define DKIOCGMEDIAINFOEXT (DKIOC|48) /* * ioctl to determine whether media is write-protected */ #define DKIOCREADONLY (DKIOC|49) /* * Used for providing the temperature. */ struct dk_temperature { uint_t dkt_flags; /* Flags */ short dkt_cur_temp; /* Current disk temperature */ short dkt_ref_temp; /* reference disk temperature */ }; #define DKT_BYPASS_PM 0x1 #define DKT_INVALID_TEMP 0xFFFF /* * Used for Media info or the current profile info */ struct dk_minfo { uint_t dki_media_type; /* Media type or profile info */ uint_t dki_lbsize; /* Logical blocksize of media */ diskaddr_t dki_capacity; /* Capacity as # of dki_lbsize blks */ }; /* * Used for Media info or the current profile info * including physical block size if supported. */ struct dk_minfo_ext { uint_t dki_media_type; /* Media type or profile info */ uint_t dki_lbsize; /* Logical blocksize of media */ diskaddr_t dki_capacity; /* Capacity as # of dki_lbsize blks */ uint_t dki_pbsize; /* Physical blocksize of media */ }; /* * Media types or profiles known */ #define DK_UNKNOWN 0x00 /* Media inserted - type unknown */ /* * SFF 8090 Specification Version 3, media types 0x01 - 0xfffe are retained to * maintain compatibility with SFF8090. The following define the * optical media type. */ #define DK_REMOVABLE_DISK 0x02 /* Removable Disk */ #define DK_MO_ERASABLE 0x03 /* MO Erasable */ #define DK_MO_WRITEONCE 0x04 /* MO Write once */ #define DK_AS_MO 0x05 /* AS MO */ #define DK_CDROM 0x08 /* CDROM */ #define DK_CDR 0x09 /* CD-R */ #define DK_CDRW 0x0A /* CD-RW */ #define DK_DVDROM 0x10 /* DVD-ROM */ #define DK_DVDR 0x11 /* DVD-R */ #define DK_DVDRAM 0x12 /* DVD_RAM or DVD-RW */ /* * Media types for other rewritable magnetic media */ #define DK_FIXED_DISK 0x10001 /* Fixed disk SCSI or otherwise */ #define DK_FLOPPY 0x10002 /* Floppy media */ #define DK_ZIP 0x10003 /* IOMEGA ZIP media */ #define DK_JAZ 0x10004 /* IOMEGA JAZ media */ #define DKIOCSETEFI (DKIOC|17) /* Set EFI info */ #define DKIOCGETEFI (DKIOC|18) /* Get EFI info */ #define DKIOCPARTITION (DKIOC|9) /* Get partition info */ /* * Ioctls to get/set volume capabilities related to Logical Volume Managers. * They include the ability to get/set capabilities and to issue a read to a * specific underlying device of a replicated device. */ #define DKIOCGETVOLCAP (DKIOC | 25) /* Get volume capabilities */ #define DKIOCSETVOLCAP (DKIOC | 26) /* Set volume capabilities */ #define DKIOCDMR (DKIOC | 27) /* Issue a directed read */ #define DKIOCDUMPINIT (DKIOC | 28) /* Dumpify a zvol */ #define DKIOCDUMPFINI (DKIOC | 29) /* Un-Dumpify a zvol */ typedef uint_t volcapinfo_t; typedef uint_t volcapset_t; #define DKV_ABR_CAP 0x00000001 /* Support Appl.Based Recovery */ #define DKV_DMR_CAP 0x00000002 /* Support Directed Mirror Read */ typedef struct volcap { volcapinfo_t vc_info; /* Capabilities available */ volcapset_t vc_set; /* Capabilities set */ } volcap_t; #define VOL_SIDENAME 256 typedef struct vol_directed_rd { int vdr_flags; offset_t vdr_offset; size_t vdr_nbytes; size_t vdr_bytesread; void *vdr_data; int vdr_side; char vdr_side_name[VOL_SIDENAME]; } vol_directed_rd_t; #define DKV_SIDE_INIT (-1) #define DKV_DMR_NEXT_SIDE 0x00000001 #define DKV_DMR_DONE 0x00000002 #define DKV_DMR_ERROR 0x00000004 #define DKV_DMR_SUCCESS 0x00000008 #define DKV_DMR_SHORT 0x00000010 #ifdef _MULTI_DATAMODEL #if _LONG_LONG_ALIGNMENT == 8 && _LONG_LONG_ALIGNMENT_32 == 4 #pragma pack(4) #endif typedef struct vol_directed_rd32 { int32_t vdr_flags; offset_t vdr_offset; /* 64-bit element on 32-bit alignment */ size32_t vdr_nbytes; size32_t vdr_bytesread; caddr32_t vdr_data; int32_t vdr_side; char vdr_side_name[VOL_SIDENAME]; } vol_directed_rd32_t; #if _LONG_LONG_ALIGNMENT == 8 && _LONG_LONG_ALIGNMENT_32 == 4 #pragma pack() #endif #endif /* _MULTI_DATAMODEL */ /* * The ioctl is used to fetch disk's device type, vendor ID, * model number/product ID, firmware revision and serial number together. * * Currently there are two device types - DKD_ATA_TYPE which means the * disk is driven by cmdk/ata or dad/uata driver, and DKD_SCSI_TYPE * which means the disk is driven by sd/scsi hba driver. */ #define DKIOC_GETDISKID (DKIOC|46) /* These two labels are for dkd_dtype of dk_disk_id_t */ #define DKD_ATA_TYPE 0x01 /* ATA disk or legacy mode SATA disk */ #define DKD_SCSI_TYPE 0x02 /* SCSI disk or native mode SATA disk */ #define DKD_ATA_MODEL 40 /* model number length */ #define DKD_ATA_FWVER 8 /* firmware revision length */ #define DKD_ATA_SERIAL 20 /* serial number length */ #define DKD_SCSI_VENDOR 8 /* vendor ID length */ #define DKD_SCSI_PRODUCT 16 /* product ID length */ #define DKD_SCSI_REVLEVEL 4 /* revision level length */ #define DKD_SCSI_SERIAL 12 /* serial number length */ /* * The argument type for DKIOC_GETDISKID ioctl. */ typedef struct dk_disk_id { uint_t dkd_dtype; union { struct { char dkd_amodel[DKD_ATA_MODEL]; /* 40 bytes */ char dkd_afwver[DKD_ATA_FWVER]; /* 8 bytes */ char dkd_aserial[DKD_ATA_SERIAL]; /* 20 bytes */ } ata_disk_id; struct { char dkd_svendor[DKD_SCSI_VENDOR]; /* 8 bytes */ char dkd_sproduct[DKD_SCSI_PRODUCT]; /* 16 bytes */ char dkd_sfwver[DKD_SCSI_REVLEVEL]; /* 4 bytes */ char dkd_sserial[DKD_SCSI_SERIAL]; /* 12 bytes */ } scsi_disk_id; } disk_id; } dk_disk_id_t; /* * The ioctl is used to update the firmware of device. */ #define DKIOC_UPDATEFW (DKIOC|47) /* The argument type for DKIOC_UPDATEFW ioctl */ typedef struct dk_updatefw { caddr_t dku_ptrbuf; /* pointer to firmware buf */ uint_t dku_size; /* firmware buf length */ uint8_t dku_type; /* firmware update type */ } dk_updatefw_t; #ifdef _SYSCALL32 typedef struct dk_updatefw_32 { caddr32_t dku_ptrbuf; /* pointer to firmware buf */ uint_t dku_size; /* firmware buf length */ uint8_t dku_type; /* firmware update type */ } dk_updatefw_32_t; #endif /* _SYSCALL32 */ /* * firmware update type - temporary or permanent use */ #define FW_TYPE_TEMP 0x0 /* temporary use */ #define FW_TYPE_PERM 0x1 /* permanent use */ /* * ioctl to free space (e.g. SCSI UNMAP) off a disk. * Pass a dkioc_free_list_t containing a list of extents to be freed. */ #define DKIOCFREE (DKIOC|50) #define DF_WAIT_SYNC 0x00000001 /* Wait for full write-out of free. */ typedef struct dkioc_free_list_ext_s { uint64_t dfle_start; uint64_t dfle_length; } dkioc_free_list_ext_t; typedef struct dkioc_free_list_s { uint64_t dfl_flags; uint64_t dfl_num_exts; uint64_t dfl_offset; dkioc_free_list_ext_t dfl_exts[1]; } dkioc_free_list_t; #define DFL_SZ(num_exts) \ (sizeof (dkioc_free_list_t) + \ (num_exts - 1) * sizeof (dkioc_free_list_ext_t)) #ifdef __cplusplus } #endif #endif /* _SYS_DKIO_H */