/* * This file and its contents are supplied under the terms of the * Common Development and Distribution License ("CDDL"), version 1.0. * You may only use this file in accordance with the terms of version * 1.0 of the CDDL. * * A full copy of the text of the CDDL should have accompanied this * source. A copy of the CDDL is also available via the Internet at * http://www.illumos.org/license/CDDL. */ /* * Copyright 2018 Nexenta Systems, Inc. All rights reserved. */ #ifndef _SMB_SMB2_H #define _SMB_SMB2_H #ifdef __cplusplus extern "C" { #endif #define SMB2_PROTOCOL_ID { 0xFE, 'S', 'M', 'B' } #define SMB2_HDR_SIZE 64 #define SMB3_TFORM_HDR_SIZE 52 /* * Protocol ID as a 32-bit little-endian integer. */ #define SMB2_PROTOCOL_MAGIC 0x424d53fe #define SMB3_ENCRYPTED_MAGIC 0x424d53fd /* * SMB2 header command codes. * These are uint16_t on the wire. */ typedef enum { SMB2_NEGOTIATE = 0, SMB2_SESSION_SETUP, SMB2_LOGOFF, SMB2_TREE_CONNECT, SMB2_TREE_DISCONNECT, SMB2_CREATE, SMB2_CLOSE, SMB2_FLUSH, SMB2_READ, SMB2_WRITE, SMB2_LOCK, SMB2_IOCTL, SMB2_CANCEL, SMB2_ECHO, SMB2_QUERY_DIRECTORY, SMB2_CHANGE_NOTIFY, SMB2_QUERY_INFO, SMB2_SET_INFO, SMB2_OPLOCK_BREAK, /* * The above (oplock break) is the last real SMB2 op-code. * We use one more slot to represent invalid commands, and * the final enum value is used for array sizes. Keep last! */ SMB2_INVALID_CMD, SMB2__NCMDS } SMB2_cmd_code; /* * SMB2 header flags. */ /* * SERVER_TO_REDIR * When set, indicates the message is a response rather than * a request. This MUST be set on responses sent from the * server to the client, and MUST NOT be set on requests * sent from the client to the server. */ #define SMB2_FLAGS_SERVER_TO_REDIR 0x00000001 /* * ASYNC_COMMAND * When set, indicates that this is an ASYNC SMB2 header. * Always set for headers of the form described in this * section. */ #define SMB2_FLAGS_ASYNC_COMMAND 0x00000002 /* * RELATED_OPERATIONS * When set in an SMB2 request, indicates that this request * is a related operation in a compounded request chain. * [MS-SMB2 sec. 3.2.4.1.4] * * When set in an SMB2 compound response, indicates that * the request corresponding to this response was part of a * related operation in a compounded request chain. * [MS-SMB2 sec. 3.3.5.2.7.2] */ #define SMB2_FLAGS_RELATED_OPERATIONS 0x00000004 /* * SIGNED * When set, indicates that this packet has been signed. * [MS-SMB2 3.1.5.1] */ #define SMB2_FLAGS_SIGNED 0x00000008 /* * [MS-SMB2] 3.2.5.3.1 The SessionKey MUST be set to the * first 16 bytes of the cryptographic key from GSSAPI. * (Padded with zeros if the GSSAPI key is shorter.) */ #define SMB2_SESSION_KEY_LEN 16 /* * DFS_OPERATIONS * When set, indicates that this command is a Distributed * File System (DFS) operation. [MS-SMB2 3.3.5.9] */ #define SMB2_FLAGS_DFS_OPERATIONS 0x10000000 /* * REPLAY_OPERATION * This flag is only valid for the SMB 3.0 dialect. When set, * it indicates that this command is a replay operation. * The client MUST ignore this bit on receipt. */ #define SMB2_FLAGS_REPLAY_OPERATION 0x20000000 /* * SMB2 Netgotiate [MS-SMB2 2.2.3] */ #define SMB2_NEGOTIATE_SIGNING_ENABLED 0x01 #define SMB2_NEGOTIATE_SIGNING_REQUIRED 0x02 #define SMB2_CAP_DFS 0x00000001 /* Added with SMB2.1 */ #define SMB2_CAP_DFS 0x00000001 #define SMB2_CAP_LEASING 0x00000002 /* * LARGE_MTU: * When set, indicates that the client supports multi-credit operations. */ #define SMB2_CAP_LARGE_MTU 0x00000004 /* Added with SMB3.0 */ #define SMB2_CAP_MULTI_CHANNEL 0x00000008 #define SMB2_CAP_PERSISTENT_HANDLES 0x00000010 #define SMB2_CAP_DIRECTORY_LEASING 0x00000020 #define SMB2_CAP_ENCRYPTION 0x00000040 /* SMB2 session flags */ #define SMB2_SESSION_FLAG_IS_GUEST 0x0001 #define SMB2_SESSION_FLAG_IS_NULL 0x0002 #define SMB2_SESSION_FLAG_ENCRYPT_DATA 0x0004 /* * Client wants to bind an existing session to a new connection */ #define SMB2_SESSION_FLAG_BINDING 0x01 /* * SMB2 Tree connect, disconnect */ /* SMB2 sharetype flags */ #define SMB2_SHARE_TYPE_DISK 0x1 #define SMB2_SHARE_TYPE_PIPE 0x2 #define SMB2_SHARE_TYPE_PRINT 0x3 /* SMB2 share flags */ #define SMB2_SHAREFLAG_MANUAL_CACHING 0x00000000 #define SMB2_SHAREFLAG_AUTO_CACHING 0x00000010 #define SMB2_SHAREFLAG_VDO_CACHING 0x00000020 #define SMB2_SHAREFLAG_NO_CACHING 0x00000030 #define SMB2_SHAREFLAG_DFS 0x00000001 #define SMB2_SHAREFLAG_DFS_ROOT 0x00000002 #define SMB2_SHAREFLAG_RESTRICT_EXCLUSIVE_OPENS 0x00000100 #define SMB2_SHAREFLAG_FORCE_SHARED_DELETE 0x00000200 #define SMB2_SHAREFLAG_ALLOW_NAMESPACE_CACHING 0x00000400 #define SMB2_SHAREFLAG_ACCESS_BASED_DIRECTORY_ENUM 0x00000800 #define SMB2_SHAREFLAG_FORCE_LEVELII_OPLOCK 0x00001000 /* SMB 3.0 */ #define SMB2_SHAREFLAG_ENABLE_HASH_V1 0x00002000 #define SMB2_SHAREFLAG_ENABLE_HASH_V2 0x00004000 #define SMB2_SHAREFLAG_ENCRYPT_DATA 0x00008000 /* SMB2 share capabilities */ #define SMB2_SHARE_CAP_DFS 0x00000008 /* SMB 3.0 */ #define SMB2_SHARE_CAP_CONTINUOUS_AVAILABILITY 0x00000010 #define SMB2_SHARE_CAP_SCALEOUT 0x00000020 #define SMB2_SHARE_CAP_CLUSTER 0x00000040 /* * SMB2 Create (open) */ /* * SMB2 requested oplock levels * Corresponds to ntifs.h OPLOCK_LEVEL_... but NOT the same! */ #define SMB2_OPLOCK_LEVEL_NONE 0x00 #define SMB2_OPLOCK_LEVEL_II 0x01 #define SMB2_OPLOCK_LEVEL_EXCLUSIVE 0x08 #define SMB2_OPLOCK_LEVEL_BATCH 0x09 #define SMB2_OPLOCK_LEVEL_LEASE 0xFF /* * SMB2 create request lease "type" * Note: Same as ntifs.h OPLOCK_LEVEL_CACHE... */ #define SMB2_LEASE_NONE 0x00 #define SMB2_LEASE_READ_CACHING 0x01 #define SMB2_LEASE_HANDLE_CACHING 0x02 #define SMB2_LEASE_WRITE_CACHING 0x04 /* SMB2 create lease flags */ #define SMB2_LEASE_FLAG_BREAK_IN_PROGRESS 0x00000002 #define SMB2_LEASE_FLAG_PARENT_LEASE_KEY_SET 0x00000004 /* SMB2 impersonation levels */ #define SMB2_IMPERSONATION_ANONYMOUS 0x00 #define SMB2_IMPERSONATION_IDENTIFICATION 0x01 #define SMB2_IMPERSONATION_IMPERSONATION 0x02 #define SMB2_IMPERSONATION_DELEGATE 0x03 /* * Note: ShareAccess, CreateDispositon, CreateOptions, * all use the same definitions as SMB1 (from MS-FSA). * Ditto FileAccess flags (as with ACLs) */ /* SMB2 Create Context tags */ #define SMB2_CREATE_EA_BUFFER 0x45787441 /* ("ExtA") */ /* * The data contains the extended attributes * that MUST be stored on the created file. * This value MUST NOT be set for named * pipes and print files. */ #define SMB2_CREATE_SD_BUFFER 0x53656344 /* ("SecD") */ /* * The data contains a security descriptor that * MUST be stored on the created file. * This value MUST NOT be set for named * pipes and print files. */ #define SMB2_CREATE_DURABLE_HANDLE_REQUEST 0x44486e51 /* ("DHnQ") */ /* The client is requesting the open to be durable */ #define SMB2_CREATE_DURABLE_HANDLE_RECONNECT 0x44486e43 /* ("DHnC") */ /* * The client is requesting to reconnect to a * durable open after being disconnected */ #define SMB2_CREATE_ALLOCATION_SIZE 0x416c5369 /* ("AISi") */ /* * The data contains the required allocation * size of the newly created file. */ #define SMB2_CREATE_QUERY_MAXIMAL_ACCESS_REQ 0x4d784163 /* ("MxAc") */ /* * The client is requesting that the server * return maximal access information. */ #define SMB2_CREATE_TIMEWARP_TOKEN 0x54577270 /* ("TWrp") */ /* * The client is requesting that the server * open an earlier version of the file identified * by the provided time stamp. */ #define SMB2_CREATE_QUERY_ON_DISK_ID 0x51466964 /* ("QFid") */ /* * The client is requesting that the server return a 32-byte * opaque BLOB that uniquely identifies the file being opened * on disk. No data is passed to the server by the client. */ #define SMB2_CREATE_DURABLE_HANDLE_REQUEST_V2 0x44483251 /* ("DH2Q") */ /* * The client is requesting the open to be durable. * This value is only supported for the SMB 3.x dialect family. */ #define SMB2_CREATE_DURABLE_HANDLE_RECONNECT_V2 0x44483243 /* ("DH2C") */ /* * The client is requesting to reconnect to a * durable open after being disconnected. * This value is only supported for the SMB 3.x dialect family. */ #define SMB2_DHANDLE_FLAG_PERSISTENT 0x00000002 /* A persistent handle is requested. */ #define SMB2_CREATE_REQUEST_LEASE 0x52714c73 /* ("RqLs") */ /* * The client is requesting that the server return a lease. * This value is only supported for the SMB 2.1 and 3.0 dialects. */ #define SMB2_CREATE_CTX_AAPL 0x4141504c /* ("AAPL") */ /* * Client is MacOS X looking for MacOS-specific extensions. */ /* * SMB2 Close */ #define SMB2_CLOSE_FLAG_POSTQUERY_ATTRIB 0x0001 /* * SMB2 Read */ #define SMB2_READFLAG_READ_UNBUFFERED 0x00000001 /* * SMB2 Write */ #define SMB2_WRITEFLAG_WRITE_THROUGH 0x00000001 #define SMB2_WRITEFLAG_WRITE_UNBUFFERED 0x00000002 /* * SMB2 Lock Request */ /* SMB2 lock flags */ /* * SMB2_LOCKFLAG_SHARED_LOCK * The range MUST be locked shared, allowing other opens * to read from or take a shared lock on the range. All opens * MUST NOT be allowed to write within the range. Other * locks can be requested and taken on this range. */ #define SMB2_LOCKFLAG_SHARED_LOCK 0x00000001 /* * SMB2_LOCKFLAG_EXCLUSIVE_LOCK * The range MUST be locked exclusive, not allowing other * opens to read, write, or lock within the range. */ #define SMB2_LOCKFLAG_EXCLUSIVE_LOCK 0x00000002 /* * SMB2_LOCKFLAG_UNLOCK * The range MUST be unlocked from a previous lock taken * on this range. The unlock range MUST be identical to the * lock range. Sub-ranges cannot be unlocked. */ #define SMB2_LOCKFLAG_UNLOCK 0x00000004 /* * SMB2_LOCKFLAG_FAIL_IMMEDIATELY * The lock operation MUST fail immediately if it conflicts * with an existing lock, instead of waiting for the range to * become available. This can be OR'ed with either of * shared_lock, exclusive_lock (nothing else). */ #define SMB2_LOCKFLAG_FAIL_IMMEDIATELY 0x00000010 /* * SMB2 Ioctl Request */ #define SMB2_0_IOCTL_IS_FSCTL 0x00000001 /* * SMB2 Query Directory */ /* * SMB2 query directory info levels * Same as SMB1 (see ntifs.h) */ /* * SMB2 Query Directory Flags * (our own names for these - spec. used poor names) */ #define SMB2_QDIR_FLAG_RESTART 0x01 /* SMB2_RESTART_SCANS */ #define SMB2_QDIR_FLAG_SINGLE 0x02 /* SMB2_RETURN_SINGLE_ENTRY */ #define SMB2_QDIR_FLAG_INDEX 0x04 /* SMB2_INDEX_SPECIFIED */ #define SMB2_QDIR_FLAG_REOPEN 0x10 /* SMB2_REOPEN */ /* * SMB2 Query Info Request */ /* info type */ #define SMB2_0_INFO_FILE 0x01 /* The file information is requested. */ #define SMB2_0_INFO_FILESYSTEM 0x02 /* The underlying object store information is requested. */ #define SMB2_0_INFO_SECURITY 0x03 /* The security information is requested. */ #define SMB2_0_INFO_QUOTA 0x04 /* The underlying object store quota information is requested. */ /* * SMB2 Change Nofity Request */ #define SMB2_WATCH_TREE 0x00000001 /* SMB2 Oplock Break: lease break notification flags */ #define SMB2_NOTIFY_BREAK_LEASE_FLAG_ACK_REQUIRED 0x01 #ifdef __cplusplus } #endif #endif /* _SMB_SMB2_H */