/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2010 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * Copyright 2014 Nexenta Systems, Inc. All rights reserved. */ /* * Copyright 1993 OpenVision Technologies, Inc., All Rights Reserved. */ /* Copyright (c) 1983, 1984, 1985, 1986, 1987, 1988, 1989 AT&T */ /* All Rights Reserved */ /* * Portions of this source code were derived from Berkeley 4.3 BSD * under license from the Regents of the University of California. */ /* * Server-side remote procedure call interface. * * Master transport handle (SVCMASTERXPRT). * The master transport handle structure is shared among service * threads processing events on the transport. Some fields in the * master structure are protected by locks * - xp_req_lock protects the request queue: * xp_req_head, xp_req_tail * - xp_thread_lock protects the thread (clone) counts * xp_threads, xp_detached_threads, xp_wq * Each master transport is registered to exactly one thread pool. * * Clone transport handle (SVCXPRT) * The clone transport handle structure is a per-service-thread handle * to the transport. The structure carries all the fields/buffers used * for request processing. A service thread or, in other words, a clone * structure, can be linked to an arbitrary master structure to process * requests on this transport. The master handle keeps track of reference * counts of threads (clones) linked to it. A service thread can switch * to another transport by unlinking its clone handle from the current * transport and linking to a new one. Switching is relatively inexpensive * but it involves locking (master's xprt->xp_thread_lock). * * Pools. * A pool represents a kernel RPC service (NFS, Lock Manager, etc.). * Transports related to the service are registered to the service pool. * Service threads can switch between different transports in the pool. * Thus, each service has its own pool of service threads. The maximum * number of threads in a pool is pool->p_maxthreads. This limit allows * to restrict resource usage by the service. Some fields are protected * by locks: * - p_req_lock protects several counts and flags: * p_reqs, p_walkers, p_asleep, p_drowsy, p_req_cv * - p_thread_lock governs other thread counts: * p_threads, p_detached_threads, p_reserved_threads, p_closing * * In addition, each pool contains a doubly-linked list of transports, * an `xprt-ready' queue and a creator thread (see below). Threads in * the pool share some other parameters such as stack size and * polling timeout. * * Pools are initialized through the svc_pool_create() function called from * the nfssys() system call. However, thread creation must be done by * the userland agent. This is done by using SVCPOOL_WAIT and * SVCPOOL_RUN arguments to nfssys(), which call svc_wait() and * svc_do_run(), respectively. Once the pool has been initialized, * the userland process must set up a 'creator' thread. This thread * should park itself in the kernel by calling svc_wait(). If * svc_wait() returns successfully, it should fork off a new worker * thread, which then calls svc_do_run() in order to get work. When * that thread is complete, svc_do_run() will return, and the user * program should call thr_exit(). * * When we try to register a new pool and there is an old pool with * the same id in the doubly linked pool list (this happens when we kill * and restart nfsd or lockd), then we unlink the old pool from the list * and mark its state as `closing'. After that the transports can still * process requests but new transports won't be registered. When all the * transports and service threads associated with the pool are gone the * creator thread (see below) will clean up the pool structure and exit. * * svc_queuereq() and svc_run(). * The kernel RPC server is interrupt driven. The svc_queuereq() interrupt * routine is called to deliver an RPC request. The service threads * loop in svc_run(). The interrupt function queues a request on the * transport's queue and it makes sure that the request is serviced. * It may either wake up one of sleeping threads, or ask for a new thread * to be created, or, if the previous request is just being picked up, do * nothing. In the last case the service thread that is picking up the * previous request will wake up or create the next thread. After a service * thread processes a request and sends a reply it returns to svc_run() * and svc_run() calls svc_poll() to find new input. * * There is no longer an "inconsistent" but "safe" optimization in the * svc_queuereq() code. This "inconsistent" state was leading to * inconsistencies between the actual number of requests and the value * of p_reqs (the total number of requests). Because of this, hangs were * occurring in svc_poll() where p_reqs was greater than one and no * requests were found on the request queues. * * svc_poll(). * In order to avoid unnecessary locking, which causes performance * problems, we always look for a pending request on the current transport. * If there is none we take a hint from the pool's `xprt-ready' queue. * If the queue had an overflow we switch to the `drain' mode checking * each transport in the pool's transport list. Once we find a * master transport handle with a pending request we latch the request * lock on this transport and return to svc_run(). If the request * belongs to a transport different than the one the service thread is * linked to we need to unlink and link again. * * A service thread goes asleep when there are no pending * requests on the transports registered on the pool's transports. * All the pool's threads sleep on the same condition variable. * If a thread has been sleeping for too long period of time * (by default 5 seconds) it wakes up and exits. Also when a transport * is closing sleeping threads wake up to unlink from this transport. * * The `xprt-ready' queue. * If a service thread finds no request on a transport it is currently linked * to it will find another transport with a pending request. To make * this search more efficient each pool has an `xprt-ready' queue. * The queue is a FIFO. When the interrupt routine queues a request it also * inserts a pointer to the transport into the `xprt-ready' queue. A * thread looking for a transport with a pending request can pop up a * transport and check for a request. The request can be already gone * since it could be taken by a thread linked to that transport. In such a * case we try the next hint. The `xprt-ready' queue has fixed size (by * default 256 nodes). If it overflows svc_poll() has to switch to the * less efficient but safe `drain' mode and walk through the pool's * transport list. * * Both the svc_poll() loop and the `xprt-ready' queue are optimized * for the peak load case that is for the situation when the queue is not * empty, there are all the time few pending requests, and a service * thread which has just processed a request does not go asleep but picks * up immediately the next request. * * Thread creator. * Each pool has a thread creator associated with it. The creator thread * sleeps on a condition variable and waits for a signal to create a * service thread. The actual thread creation is done in userland by * the method described in "Pools" above. * * Signaling threads should turn on the `creator signaled' flag, and * can avoid sending signals when the flag is on. The flag is cleared * when the thread is created. * * When the pool is in closing state (ie it has been already unregistered * from the pool list) the last thread on the last transport in the pool * should turn the p_creator_exit flag on. The creator thread will * clean up the pool structure and exit. * * Thread reservation; Detaching service threads. * A service thread can detach itself to block for an extended amount * of time. However, to keep the service active we need to guarantee * at least pool->p_redline non-detached threads that can process incoming * requests. This, the maximum number of detached and reserved threads is * p->p_maxthreads - p->p_redline. A service thread should first acquire * a reservation, and if the reservation was granted it can detach itself. * If a reservation was granted but the thread does not detach itself * it should cancel the reservation before it returns to svc_run(). */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define RQCRED_SIZE 400 /* this size is excessive */ /* * Defines for svc_poll() */ #define SVC_EXPRTGONE ((SVCMASTERXPRT *)1) /* Transport is closing */ #define SVC_ETIMEDOUT ((SVCMASTERXPRT *)2) /* Timeout */ #define SVC_EINTR ((SVCMASTERXPRT *)3) /* Interrupted by signal */ /* * Default stack size for service threads. */ #define DEFAULT_SVC_RUN_STKSIZE (0) /* default kernel stack */ int svc_default_stksize = DEFAULT_SVC_RUN_STKSIZE; /* * Default polling timeout for service threads. * Multiplied by hz when used. */ #define DEFAULT_SVC_POLL_TIMEOUT (5) /* seconds */ clock_t svc_default_timeout = DEFAULT_SVC_POLL_TIMEOUT; /* * Size of the `xprt-ready' queue. */ #define DEFAULT_SVC_QSIZE (256) /* qnodes */ size_t svc_default_qsize = DEFAULT_SVC_QSIZE; /* * Default limit for the number of service threads. */ #define DEFAULT_SVC_MAXTHREADS (INT16_MAX) int svc_default_maxthreads = DEFAULT_SVC_MAXTHREADS; /* * Maximum number of requests from the same transport (in `drain' mode). */ #define DEFAULT_SVC_MAX_SAME_XPRT (8) int svc_default_max_same_xprt = DEFAULT_SVC_MAX_SAME_XPRT; /* * Default `Redline' of non-detached threads. * Total number of detached and reserved threads in an RPC server * thread pool is limited to pool->p_maxthreads - svc_redline. */ #define DEFAULT_SVC_REDLINE (1) int svc_default_redline = DEFAULT_SVC_REDLINE; /* * A node for the `xprt-ready' queue. * See below. */ struct __svcxprt_qnode { __SVCXPRT_QNODE *q_next; SVCMASTERXPRT *q_xprt; }; /* * Global SVC variables (private). */ struct svc_globals { SVCPOOL *svc_pools; kmutex_t svc_plock; }; /* * Debug variable to check for rdma based * transport startup and cleanup. Contorlled * through /etc/system. Off by default. */ int rdma_check = 0; /* * Authentication parameters list. */ static caddr_t rqcred_head; static kmutex_t rqcred_lock; /* * Pointers to transport specific `rele' routines in rpcmod (set from rpcmod). */ void (*rpc_rele)(queue_t *, mblk_t *) = NULL; void (*mir_rele)(queue_t *, mblk_t *) = NULL; /* ARGSUSED */ void rpc_rdma_rele(queue_t *q, mblk_t *mp) { } void (*rdma_rele)(queue_t *, mblk_t *) = rpc_rdma_rele; /* * This macro picks which `rele' routine to use, based on the transport type. */ #define RELE_PROC(xprt) \ ((xprt)->xp_type == T_RDMA ? rdma_rele : \ (((xprt)->xp_type == T_CLTS) ? rpc_rele : mir_rele)) /* * If true, then keep quiet about version mismatch. * This macro is for broadcast RPC only. We have no broadcast RPC in * kernel now but one may define a flag in the transport structure * and redefine this macro. */ #define version_keepquiet(xprt) (FALSE) /* * ZSD key used to retrieve zone-specific svc globals */ static zone_key_t svc_zone_key; static void svc_callout_free(SVCMASTERXPRT *); static void svc_xprt_qinit(SVCPOOL *, size_t); static void svc_xprt_qdestroy(SVCPOOL *); static void svc_thread_creator(SVCPOOL *); static void svc_creator_signal(SVCPOOL *); static void svc_creator_signalexit(SVCPOOL *); static void svc_pool_unregister(struct svc_globals *, SVCPOOL *); static int svc_run(SVCPOOL *); /* ARGSUSED */ static void * svc_zoneinit(zoneid_t zoneid) { struct svc_globals *svc; svc = kmem_alloc(sizeof (*svc), KM_SLEEP); mutex_init(&svc->svc_plock, NULL, MUTEX_DEFAULT, NULL); svc->svc_pools = NULL; return (svc); } /* ARGSUSED */ static void svc_zoneshutdown(zoneid_t zoneid, void *arg) { struct svc_globals *svc = arg; SVCPOOL *pool; mutex_enter(&svc->svc_plock); while ((pool = svc->svc_pools) != NULL) { svc_pool_unregister(svc, pool); } mutex_exit(&svc->svc_plock); } /* ARGSUSED */ static void svc_zonefini(zoneid_t zoneid, void *arg) { struct svc_globals *svc = arg; ASSERT(svc->svc_pools == NULL); mutex_destroy(&svc->svc_plock); kmem_free(svc, sizeof (*svc)); } /* * Global SVC init routine. * Initialize global generic and transport type specific structures * used by the kernel RPC server side. This routine is called only * once when the module is being loaded. */ void svc_init() { zone_key_create(&svc_zone_key, svc_zoneinit, svc_zoneshutdown, svc_zonefini); svc_cots_init(); svc_clts_init(); } /* * Destroy the SVCPOOL structure. */ static void svc_pool_cleanup(SVCPOOL *pool) { ASSERT(pool->p_threads + pool->p_detached_threads == 0); ASSERT(pool->p_lcount == 0); ASSERT(pool->p_closing); /* * Call the user supplied shutdown function. This is done * here so the user of the pool will be able to cleanup * service related resources. */ if (pool->p_shutdown != NULL) (pool->p_shutdown)(); /* Destroy `xprt-ready' queue */ svc_xprt_qdestroy(pool); /* Destroy transport list */ rw_destroy(&pool->p_lrwlock); /* Destroy locks and condition variables */ mutex_destroy(&pool->p_thread_lock); mutex_destroy(&pool->p_req_lock); cv_destroy(&pool->p_req_cv); /* Destroy creator's locks and condition variables */ mutex_destroy(&pool->p_creator_lock); cv_destroy(&pool->p_creator_cv); mutex_destroy(&pool->p_user_lock); cv_destroy(&pool->p_user_cv); /* Free pool structure */ kmem_free(pool, sizeof (SVCPOOL)); } /* * If all the transports and service threads are already gone * signal the creator thread to clean up and exit. */ static bool_t svc_pool_tryexit(SVCPOOL *pool) { ASSERT(MUTEX_HELD(&pool->p_thread_lock)); ASSERT(pool->p_closing); if (pool->p_threads + pool->p_detached_threads == 0) { rw_enter(&pool->p_lrwlock, RW_READER); if (pool->p_lcount == 0) { /* * Release the locks before sending a signal. */ rw_exit(&pool->p_lrwlock); mutex_exit(&pool->p_thread_lock); /* * Notify the creator thread to clean up and exit * * NOTICE: No references to the pool beyond this point! * The pool is being destroyed. */ ASSERT(!MUTEX_HELD(&pool->p_thread_lock)); svc_creator_signalexit(pool); return (TRUE); } rw_exit(&pool->p_lrwlock); } ASSERT(MUTEX_HELD(&pool->p_thread_lock)); return (FALSE); } /* * Find a pool with a given id. */ static SVCPOOL * svc_pool_find(struct svc_globals *svc, int id) { SVCPOOL *pool; ASSERT(MUTEX_HELD(&svc->svc_plock)); /* * Search the list for a pool with a matching id * and register the transport handle with that pool. */ for (pool = svc->svc_pools; pool; pool = pool->p_next) if (pool->p_id == id) return (pool); return (NULL); } /* * PSARC 2003/523 Contract Private Interface * svc_do_run * Changes must be reviewed by Solaris File Sharing * Changes must be communicated to contract-2003-523@sun.com */ int svc_do_run(int id) { SVCPOOL *pool; int err = 0; struct svc_globals *svc; svc = zone_getspecific(svc_zone_key, curproc->p_zone); mutex_enter(&svc->svc_plock); pool = svc_pool_find(svc, id); mutex_exit(&svc->svc_plock); if (pool == NULL) return (ENOENT); /* * Increment counter of pool threads now * that a thread has been created. */ mutex_enter(&pool->p_thread_lock); pool->p_threads++; mutex_exit(&pool->p_thread_lock); /* Give work to the new thread. */ err = svc_run(pool); return (err); } /* * Unregister a pool from the pool list. * Set the closing state. If all the transports and service threads * are already gone signal the creator thread to clean up and exit. */ static void svc_pool_unregister(struct svc_globals *svc, SVCPOOL *pool) { SVCPOOL *next = pool->p_next; SVCPOOL *prev = pool->p_prev; ASSERT(MUTEX_HELD(&svc->svc_plock)); /* Remove from the list */ if (pool == svc->svc_pools) svc->svc_pools = next; if (next) next->p_prev = prev; if (prev) prev->p_next = next; pool->p_next = pool->p_prev = NULL; /* * Offline the pool. Mark the pool as closing. * If there are no transports in this pool notify * the creator thread to clean it up and exit. */ mutex_enter(&pool->p_thread_lock); if (pool->p_offline != NULL) (pool->p_offline)(); pool->p_closing = TRUE; if (svc_pool_tryexit(pool)) return; mutex_exit(&pool->p_thread_lock); } /* * Register a pool with a given id in the global doubly linked pool list. * - if there is a pool with the same id in the list then unregister it * - insert the new pool into the list. */ static void svc_pool_register(struct svc_globals *svc, SVCPOOL *pool, int id) { SVCPOOL *old_pool; /* * If there is a pool with the same id then remove it from * the list and mark the pool as closing. */ mutex_enter(&svc->svc_plock); if (old_pool = svc_pool_find(svc, id)) svc_pool_unregister(svc, old_pool); /* Insert into the doubly linked list */ pool->p_id = id; pool->p_next = svc->svc_pools; pool->p_prev = NULL; if (svc->svc_pools) svc->svc_pools->p_prev = pool; svc->svc_pools = pool; mutex_exit(&svc->svc_plock); } /* * Initialize a newly created pool structure */ static int svc_pool_init(SVCPOOL *pool, uint_t maxthreads, uint_t redline, uint_t qsize, uint_t timeout, uint_t stksize, uint_t max_same_xprt) { klwp_t *lwp = ttolwp(curthread); ASSERT(pool); if (maxthreads == 0) maxthreads = svc_default_maxthreads; if (redline == 0) redline = svc_default_redline; if (qsize == 0) qsize = svc_default_qsize; if (timeout == 0) timeout = svc_default_timeout; if (stksize == 0) stksize = svc_default_stksize; if (max_same_xprt == 0) max_same_xprt = svc_default_max_same_xprt; if (maxthreads < redline) return (EINVAL); /* Allocate and initialize the `xprt-ready' queue */ svc_xprt_qinit(pool, qsize); /* Initialize doubly-linked xprt list */ rw_init(&pool->p_lrwlock, NULL, RW_DEFAULT, NULL); /* * Setting lwp_childstksz on the current lwp so that * descendants of this lwp get the modified stacksize, if * it is defined. It is important that either this lwp or * one of its descendants do the actual servicepool thread * creation to maintain the stacksize inheritance. */ if (lwp != NULL) lwp->lwp_childstksz = stksize; /* Initialize thread limits, locks and condition variables */ pool->p_maxthreads = maxthreads; pool->p_redline = redline; pool->p_timeout = timeout * hz; pool->p_stksize = stksize; pool->p_max_same_xprt = max_same_xprt; mutex_init(&pool->p_thread_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&pool->p_req_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&pool->p_req_cv, NULL, CV_DEFAULT, NULL); /* Initialize userland creator */ pool->p_user_exit = FALSE; pool->p_signal_create_thread = FALSE; pool->p_user_waiting = FALSE; mutex_init(&pool->p_user_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&pool->p_user_cv, NULL, CV_DEFAULT, NULL); /* Initialize the creator and start the creator thread */ pool->p_creator_exit = FALSE; mutex_init(&pool->p_creator_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&pool->p_creator_cv, NULL, CV_DEFAULT, NULL); (void) zthread_create(NULL, pool->p_stksize, svc_thread_creator, pool, 0, minclsyspri); return (0); } /* * PSARC 2003/523 Contract Private Interface * svc_pool_create * Changes must be reviewed by Solaris File Sharing * Changes must be communicated to contract-2003-523@sun.com * * Create an kernel RPC server-side thread/transport pool. * * This is public interface for creation of a server RPC thread pool * for a given service provider. Transports registered with the pool's id * will be served by a pool's threads. This function is called from the * nfssys() system call. */ int svc_pool_create(struct svcpool_args *args) { SVCPOOL *pool; int error; struct svc_globals *svc; /* * Caller should check credentials in a way appropriate * in the context of the call. */ svc = zone_getspecific(svc_zone_key, curproc->p_zone); /* Allocate a new pool */ pool = kmem_zalloc(sizeof (SVCPOOL), KM_SLEEP); /* * Initialize the pool structure and create a creator thread. */ error = svc_pool_init(pool, args->maxthreads, args->redline, args->qsize, args->timeout, args->stksize, args->max_same_xprt); if (error) { kmem_free(pool, sizeof (SVCPOOL)); return (error); } /* Register the pool with the global pool list */ svc_pool_register(svc, pool, args->id); return (0); } int svc_pool_control(int id, int cmd, void *arg) { SVCPOOL *pool; struct svc_globals *svc; svc = zone_getspecific(svc_zone_key, curproc->p_zone); switch (cmd) { case SVCPSET_SHUTDOWN_PROC: /* * Search the list for a pool with a matching id * and register the transport handle with that pool. */ mutex_enter(&svc->svc_plock); if ((pool = svc_pool_find(svc, id)) == NULL) { mutex_exit(&svc->svc_plock); return (ENOENT); } /* * Grab the transport list lock before releasing the * pool list lock */ rw_enter(&pool->p_lrwlock, RW_WRITER); mutex_exit(&svc->svc_plock); pool->p_shutdown = *((void (*)())arg); rw_exit(&pool->p_lrwlock); return (0); case SVCPSET_UNREGISTER_PROC: /* * Search the list for a pool with a matching id * and register the unregister callback handle with that pool. */ mutex_enter(&svc->svc_plock); if ((pool = svc_pool_find(svc, id)) == NULL) { mutex_exit(&svc->svc_plock); return (ENOENT); } /* * Grab the transport list lock before releasing the * pool list lock */ rw_enter(&pool->p_lrwlock, RW_WRITER); mutex_exit(&svc->svc_plock); pool->p_offline = *((void (*)())arg); rw_exit(&pool->p_lrwlock); return (0); default: return (EINVAL); } } /* * Pool's transport list manipulation routines. * - svc_xprt_register() * - svc_xprt_unregister() * * svc_xprt_register() is called from svc_tli_kcreate() to * insert a new master transport handle into the doubly linked * list of server transport handles (one list per pool). * * The list is used by svc_poll(), when it operates in `drain' * mode, to search for a next transport with a pending request. */ int svc_xprt_register(SVCMASTERXPRT *xprt, int id) { SVCMASTERXPRT *prev, *next; SVCPOOL *pool; struct svc_globals *svc; svc = zone_getspecific(svc_zone_key, curproc->p_zone); /* * Search the list for a pool with a matching id * and register the transport handle with that pool. */ mutex_enter(&svc->svc_plock); if ((pool = svc_pool_find(svc, id)) == NULL) { mutex_exit(&svc->svc_plock); return (ENOENT); } /* Grab the transport list lock before releasing the pool list lock */ rw_enter(&pool->p_lrwlock, RW_WRITER); mutex_exit(&svc->svc_plock); /* Don't register new transports when the pool is in closing state */ if (pool->p_closing) { rw_exit(&pool->p_lrwlock); return (EBUSY); } /* * Initialize xp_pool to point to the pool. * We don't want to go through the pool list every time. */ xprt->xp_pool = pool; /* * Insert a transport handle into the list. * The list head points to the most recently inserted transport. */ if (pool->p_lhead == NULL) pool->p_lhead = xprt->xp_prev = xprt->xp_next = xprt; else { next = pool->p_lhead; prev = pool->p_lhead->xp_prev; xprt->xp_next = next; xprt->xp_prev = prev; pool->p_lhead = prev->xp_next = next->xp_prev = xprt; } /* Increment the transports count */ pool->p_lcount++; rw_exit(&pool->p_lrwlock); return (0); } /* * Called from svc_xprt_cleanup() to remove a master transport handle * from the pool's list of server transports (when a transport is * being destroyed). */ void svc_xprt_unregister(SVCMASTERXPRT *xprt) { SVCPOOL *pool = xprt->xp_pool; /* * Unlink xprt from the list. * If the list head points to this xprt then move it * to the next xprt or reset to NULL if this is the last * xprt in the list. */ rw_enter(&pool->p_lrwlock, RW_WRITER); if (xprt == xprt->xp_next) pool->p_lhead = NULL; else { SVCMASTERXPRT *next = xprt->xp_next; SVCMASTERXPRT *prev = xprt->xp_prev; next->xp_prev = prev; prev->xp_next = next; if (pool->p_lhead == xprt) pool->p_lhead = next; } xprt->xp_next = xprt->xp_prev = NULL; /* Decrement list count */ pool->p_lcount--; rw_exit(&pool->p_lrwlock); } static void svc_xprt_qdestroy(SVCPOOL *pool) { mutex_destroy(&pool->p_qend_lock); kmem_free(pool->p_qbody, pool->p_qsize * sizeof (__SVCXPRT_QNODE)); } /* * Initialize an `xprt-ready' queue for a given pool. */ static void svc_xprt_qinit(SVCPOOL *pool, size_t qsize) { int i; pool->p_qsize = qsize; pool->p_qbody = kmem_zalloc(pool->p_qsize * sizeof (__SVCXPRT_QNODE), KM_SLEEP); for (i = 0; i < pool->p_qsize - 1; i++) pool->p_qbody[i].q_next = &(pool->p_qbody[i+1]); pool->p_qbody[pool->p_qsize-1].q_next = &(pool->p_qbody[0]); pool->p_qtop = &(pool->p_qbody[0]); pool->p_qend = &(pool->p_qbody[0]); mutex_init(&pool->p_qend_lock, NULL, MUTEX_DEFAULT, NULL); } /* * Called from the svc_queuereq() interrupt routine to queue * a hint for svc_poll() which transport has a pending request. * - insert a pointer to xprt into the xprt-ready queue (FIFO) * - if the xprt-ready queue is full turn the overflow flag on. * * NOTICE: pool->p_qtop is protected by the the pool's request lock * and the caller (svc_queuereq()) must hold the lock. */ static void svc_xprt_qput(SVCPOOL *pool, SVCMASTERXPRT *xprt) { ASSERT(MUTEX_HELD(&pool->p_req_lock)); /* If the overflow flag is there is nothing we can do */ if (pool->p_qoverflow) return; /* If the queue is full turn the overflow flag on and exit */ if (pool->p_qtop->q_next == pool->p_qend) { mutex_enter(&pool->p_qend_lock); if (pool->p_qtop->q_next == pool->p_qend) { pool->p_qoverflow = TRUE; mutex_exit(&pool->p_qend_lock); return; } mutex_exit(&pool->p_qend_lock); } /* Insert a hint and move pool->p_qtop */ pool->p_qtop->q_xprt = xprt; pool->p_qtop = pool->p_qtop->q_next; } /* * Called from svc_poll() to get a hint which transport has a * pending request. Returns a pointer to a transport or NULL if the * `xprt-ready' queue is empty. * * Since we do not acquire the pool's request lock while checking if * the queue is empty we may miss a request that is just being delivered. * However this is ok since svc_poll() will retry again until the * count indicates that there are pending requests for this pool. */ static SVCMASTERXPRT * svc_xprt_qget(SVCPOOL *pool) { SVCMASTERXPRT *xprt; mutex_enter(&pool->p_qend_lock); do { /* * If the queue is empty return NULL. * Since we do not acquire the pool's request lock which * protects pool->p_qtop this is not exact check. However, * this is safe - if we miss a request here svc_poll() * will retry again. */ if (pool->p_qend == pool->p_qtop) { mutex_exit(&pool->p_qend_lock); return (NULL); } /* Get a hint and move pool->p_qend */ xprt = pool->p_qend->q_xprt; pool->p_qend = pool->p_qend->q_next; /* Skip fields deleted by svc_xprt_qdelete() */ } while (xprt == NULL); mutex_exit(&pool->p_qend_lock); return (xprt); } /* * Delete all the references to a transport handle that * is being destroyed from the xprt-ready queue. * Deleted pointers are replaced with NULLs. */ static void svc_xprt_qdelete(SVCPOOL *pool, SVCMASTERXPRT *xprt) { __SVCXPRT_QNODE *q; mutex_enter(&pool->p_req_lock); for (q = pool->p_qend; q != pool->p_qtop; q = q->q_next) { if (q->q_xprt == xprt) q->q_xprt = NULL; } mutex_exit(&pool->p_req_lock); } /* * Destructor for a master server transport handle. * - if there are no more non-detached threads linked to this transport * then, if requested, call xp_closeproc (we don't wait for detached * threads linked to this transport to complete). * - if there are no more threads linked to this * transport then * a) remove references to this transport from the xprt-ready queue * b) remove a reference to this transport from the pool's transport list * c) call a transport specific `destroy' function * d) cancel remaining thread reservations. * * NOTICE: Caller must hold the transport's thread lock. */ static void svc_xprt_cleanup(SVCMASTERXPRT *xprt, bool_t detached) { ASSERT(MUTEX_HELD(&xprt->xp_thread_lock)); ASSERT(xprt->xp_wq == NULL); /* * If called from the last non-detached thread * it should call the closeproc on this transport. */ if (!detached && xprt->xp_threads == 0 && xprt->xp_closeproc) { (*(xprt->xp_closeproc)) (xprt); } if (xprt->xp_threads + xprt->xp_detached_threads > 0) mutex_exit(&xprt->xp_thread_lock); else { /* Remove references to xprt from the `xprt-ready' queue */ svc_xprt_qdelete(xprt->xp_pool, xprt); /* Unregister xprt from the pool's transport list */ svc_xprt_unregister(xprt); svc_callout_free(xprt); SVC_DESTROY(xprt); } } /* * Find a dispatch routine for a given prog/vers pair. * This function is called from svc_getreq() to search the callout * table for an entry with a matching RPC program number `prog' * and a version range that covers `vers'. * - if it finds a matching entry it returns pointer to the dispatch routine * - otherwise it returns NULL and, if `minp' or `maxp' are not NULL, * fills them with, respectively, lowest version and highest version * supported for the program `prog' */ static SVC_DISPATCH * svc_callout_find(SVCXPRT *xprt, rpcprog_t prog, rpcvers_t vers, rpcvers_t *vers_min, rpcvers_t *vers_max) { SVC_CALLOUT_TABLE *sct = xprt->xp_sct; int i; *vers_min = ~(rpcvers_t)0; *vers_max = 0; for (i = 0; i < sct->sct_size; i++) { SVC_CALLOUT *sc = &sct->sct_sc[i]; if (prog == sc->sc_prog) { if (vers >= sc->sc_versmin && vers <= sc->sc_versmax) return (sc->sc_dispatch); if (*vers_max < sc->sc_versmax) *vers_max = sc->sc_versmax; if (*vers_min > sc->sc_versmin) *vers_min = sc->sc_versmin; } } return (NULL); } /* * Optionally free callout table allocated for this transport by * the service provider. */ static void svc_callout_free(SVCMASTERXPRT *xprt) { SVC_CALLOUT_TABLE *sct = xprt->xp_sct; if (sct->sct_free) { kmem_free(sct->sct_sc, sct->sct_size * sizeof (SVC_CALLOUT)); kmem_free(sct, sizeof (SVC_CALLOUT_TABLE)); } } /* * Send a reply to an RPC request * * PSARC 2003/523 Contract Private Interface * svc_sendreply * Changes must be reviewed by Solaris File Sharing * Changes must be communicated to contract-2003-523@sun.com */ bool_t svc_sendreply(const SVCXPRT *clone_xprt, const xdrproc_t xdr_results, const caddr_t xdr_location) { struct rpc_msg rply; rply.rm_direction = REPLY; rply.rm_reply.rp_stat = MSG_ACCEPTED; rply.acpted_rply.ar_verf = clone_xprt->xp_verf; rply.acpted_rply.ar_stat = SUCCESS; rply.acpted_rply.ar_results.where = xdr_location; rply.acpted_rply.ar_results.proc = xdr_results; return (SVC_REPLY((SVCXPRT *)clone_xprt, &rply)); } /* * No procedure error reply * * PSARC 2003/523 Contract Private Interface * svcerr_noproc * Changes must be reviewed by Solaris File Sharing * Changes must be communicated to contract-2003-523@sun.com */ void svcerr_noproc(const SVCXPRT *clone_xprt) { struct rpc_msg rply; rply.rm_direction = REPLY; rply.rm_reply.rp_stat = MSG_ACCEPTED; rply.acpted_rply.ar_verf = clone_xprt->xp_verf; rply.acpted_rply.ar_stat = PROC_UNAVAIL; SVC_FREERES((SVCXPRT *)clone_xprt); SVC_REPLY((SVCXPRT *)clone_xprt, &rply); } /* * Can't decode arguments error reply * * PSARC 2003/523 Contract Private Interface * svcerr_decode * Changes must be reviewed by Solaris File Sharing * Changes must be communicated to contract-2003-523@sun.com */ void svcerr_decode(const SVCXPRT *clone_xprt) { struct rpc_msg rply; rply.rm_direction = REPLY; rply.rm_reply.rp_stat = MSG_ACCEPTED; rply.acpted_rply.ar_verf = clone_xprt->xp_verf; rply.acpted_rply.ar_stat = GARBAGE_ARGS; SVC_FREERES((SVCXPRT *)clone_xprt); SVC_REPLY((SVCXPRT *)clone_xprt, &rply); } /* * Some system error */ void svcerr_systemerr(const SVCXPRT *clone_xprt) { struct rpc_msg rply; rply.rm_direction = REPLY; rply.rm_reply.rp_stat = MSG_ACCEPTED; rply.acpted_rply.ar_verf = clone_xprt->xp_verf; rply.acpted_rply.ar_stat = SYSTEM_ERR; SVC_FREERES((SVCXPRT *)clone_xprt); SVC_REPLY((SVCXPRT *)clone_xprt, &rply); } /* * Authentication error reply */ void svcerr_auth(const SVCXPRT *clone_xprt, const enum auth_stat why) { struct rpc_msg rply; rply.rm_direction = REPLY; rply.rm_reply.rp_stat = MSG_DENIED; rply.rjcted_rply.rj_stat = AUTH_ERROR; rply.rjcted_rply.rj_why = why; SVC_FREERES((SVCXPRT *)clone_xprt); SVC_REPLY((SVCXPRT *)clone_xprt, &rply); } /* * Authentication too weak error reply */ void svcerr_weakauth(const SVCXPRT *clone_xprt) { svcerr_auth((SVCXPRT *)clone_xprt, AUTH_TOOWEAK); } /* * Authentication error; bad credentials */ void svcerr_badcred(const SVCXPRT *clone_xprt) { struct rpc_msg rply; rply.rm_direction = REPLY; rply.rm_reply.rp_stat = MSG_DENIED; rply.rjcted_rply.rj_stat = AUTH_ERROR; rply.rjcted_rply.rj_why = AUTH_BADCRED; SVC_FREERES((SVCXPRT *)clone_xprt); SVC_REPLY((SVCXPRT *)clone_xprt, &rply); } /* * Program unavailable error reply * * PSARC 2003/523 Contract Private Interface * svcerr_noprog * Changes must be reviewed by Solaris File Sharing * Changes must be communicated to contract-2003-523@sun.com */ void svcerr_noprog(const SVCXPRT *clone_xprt) { struct rpc_msg rply; rply.rm_direction = REPLY; rply.rm_reply.rp_stat = MSG_ACCEPTED; rply.acpted_rply.ar_verf = clone_xprt->xp_verf; rply.acpted_rply.ar_stat = PROG_UNAVAIL; SVC_FREERES((SVCXPRT *)clone_xprt); SVC_REPLY((SVCXPRT *)clone_xprt, &rply); } /* * Program version mismatch error reply * * PSARC 2003/523 Contract Private Interface * svcerr_progvers * Changes must be reviewed by Solaris File Sharing * Changes must be communicated to contract-2003-523@sun.com */ void svcerr_progvers(const SVCXPRT *clone_xprt, const rpcvers_t low_vers, const rpcvers_t high_vers) { struct rpc_msg rply; rply.rm_direction = REPLY; rply.rm_reply.rp_stat = MSG_ACCEPTED; rply.acpted_rply.ar_verf = clone_xprt->xp_verf; rply.acpted_rply.ar_stat = PROG_MISMATCH; rply.acpted_rply.ar_vers.low = low_vers; rply.acpted_rply.ar_vers.high = high_vers; SVC_FREERES((SVCXPRT *)clone_xprt); SVC_REPLY((SVCXPRT *)clone_xprt, &rply); } /* * Get server side input from some transport. * * Statement of authentication parameters management: * This function owns and manages all authentication parameters, specifically * the "raw" parameters (msg.rm_call.cb_cred and msg.rm_call.cb_verf) and * the "cooked" credentials (rqst->rq_clntcred). * However, this function does not know the structure of the cooked * credentials, so it make the following assumptions: * a) the structure is contiguous (no pointers), and * b) the cred structure size does not exceed RQCRED_SIZE bytes. * In all events, all three parameters are freed upon exit from this routine. * The storage is trivially managed on the call stack in user land, but * is malloced in kernel land. * * Note: the xprt's xp_svc_lock is not held while the service's dispatch * routine is running. If we decide to implement svc_unregister(), we'll * need to decide whether it's okay for a thread to unregister a service * while a request is being processed. If we decide that this is a * problem, we can probably use some sort of reference counting scheme to * keep the callout entry from going away until the request has completed. */ static void svc_getreq( SVCXPRT *clone_xprt, /* clone transport handle */ mblk_t *mp) { struct rpc_msg msg; struct svc_req r; char *cred_area; /* too big to allocate on call stack */ TRACE_0(TR_FAC_KRPC, TR_SVC_GETREQ_START, "svc_getreq_start:"); ASSERT(clone_xprt->xp_master != NULL); ASSERT(!is_system_labeled() || msg_getcred(mp, NULL) != NULL || mp->b_datap->db_type != M_DATA); /* * Firstly, allocate the authentication parameters' storage */ mutex_enter(&rqcred_lock); if (rqcred_head) { cred_area = rqcred_head; /* LINTED pointer alignment */ rqcred_head = *(caddr_t *)rqcred_head; mutex_exit(&rqcred_lock); } else { mutex_exit(&rqcred_lock); cred_area = kmem_alloc(2 * MAX_AUTH_BYTES + RQCRED_SIZE, KM_SLEEP); } msg.rm_call.cb_cred.oa_base = cred_area; msg.rm_call.cb_verf.oa_base = &(cred_area[MAX_AUTH_BYTES]); r.rq_clntcred = &(cred_area[2 * MAX_AUTH_BYTES]); /* * underlying transport recv routine may modify mblk data * and make it difficult to extract label afterwards. So * get the label from the raw mblk data now. */ if (is_system_labeled()) { cred_t *cr; r.rq_label = kmem_alloc(sizeof (bslabel_t), KM_SLEEP); cr = msg_getcred(mp, NULL); ASSERT(cr != NULL); bcopy(label2bslabel(crgetlabel(cr)), r.rq_label, sizeof (bslabel_t)); } else { r.rq_label = NULL; } /* * Now receive a message from the transport. */ if (SVC_RECV(clone_xprt, mp, &msg)) { void (*dispatchroutine) (struct svc_req *, SVCXPRT *); rpcvers_t vers_min; rpcvers_t vers_max; bool_t no_dispatch; enum auth_stat why; /* * Find the registered program and call its * dispatch routine. */ r.rq_xprt = clone_xprt; r.rq_prog = msg.rm_call.cb_prog; r.rq_vers = msg.rm_call.cb_vers; r.rq_proc = msg.rm_call.cb_proc; r.rq_cred = msg.rm_call.cb_cred; /* * First authenticate the message. */ TRACE_0(TR_FAC_KRPC, TR_SVC_GETREQ_AUTH_START, "svc_getreq_auth_start:"); if ((why = sec_svc_msg(&r, &msg, &no_dispatch)) != AUTH_OK) { TRACE_1(TR_FAC_KRPC, TR_SVC_GETREQ_AUTH_END, "svc_getreq_auth_end:(%S)", "failed"); svcerr_auth(clone_xprt, why); /* * Free the arguments. */ (void) SVC_FREEARGS(clone_xprt, NULL, NULL); } else if (no_dispatch) { /* * XXX - when bug id 4053736 is done, remove * the SVC_FREEARGS() call. */ (void) SVC_FREEARGS(clone_xprt, NULL, NULL); } else { TRACE_1(TR_FAC_KRPC, TR_SVC_GETREQ_AUTH_END, "svc_getreq_auth_end:(%S)", "good"); dispatchroutine = svc_callout_find(clone_xprt, r.rq_prog, r.rq_vers, &vers_min, &vers_max); if (dispatchroutine) { (*dispatchroutine) (&r, clone_xprt); } else { /* * If we got here, the program or version * is not served ... */ if (vers_max == 0 || version_keepquiet(clone_xprt)) svcerr_noprog(clone_xprt); else svcerr_progvers(clone_xprt, vers_min, vers_max); /* * Free the arguments. For successful calls * this is done by the dispatch routine. */ (void) SVC_FREEARGS(clone_xprt, NULL, NULL); /* Fall through to ... */ } /* * Call cleanup procedure for RPCSEC_GSS. * This is a hack since there is currently no * op, such as SVC_CLEANAUTH. rpc_gss_cleanup * should only be called for a non null proc. * Null procs in RPC GSS are overloaded to * provide context setup and control. The main * purpose of rpc_gss_cleanup is to decrement the * reference count associated with the cached * GSS security context. We should never get here * for an RPCSEC_GSS null proc since *no_dispatch * would have been set to true from sec_svc_msg above. */ if (r.rq_cred.oa_flavor == RPCSEC_GSS) rpc_gss_cleanup(clone_xprt); } } if (r.rq_label != NULL) kmem_free(r.rq_label, sizeof (bslabel_t)); /* * Free authentication parameters' storage */ mutex_enter(&rqcred_lock); /* LINTED pointer alignment */ *(caddr_t *)cred_area = rqcred_head; rqcred_head = cred_area; mutex_exit(&rqcred_lock); } /* * Allocate new clone transport handle. */ SVCXPRT * svc_clone_init(void) { SVCXPRT *clone_xprt; clone_xprt = kmem_zalloc(sizeof (SVCXPRT), KM_SLEEP); clone_xprt->xp_cred = crget(); return (clone_xprt); } /* * Free memory allocated by svc_clone_init. */ void svc_clone_free(SVCXPRT *clone_xprt) { /* Fre credentials from crget() */ if (clone_xprt->xp_cred) crfree(clone_xprt->xp_cred); kmem_free(clone_xprt, sizeof (SVCXPRT)); } /* * Link a per-thread clone transport handle to a master * - increment a thread reference count on the master * - copy some of the master's fields to the clone * - call a transport specific clone routine. */ void svc_clone_link(SVCMASTERXPRT *xprt, SVCXPRT *clone_xprt, SVCXPRT *clone_xprt2) { cred_t *cred = clone_xprt->xp_cred; ASSERT(cred); /* * Bump up master's thread count. * Linking a per-thread clone transport handle to a master * associates a service thread with the master. */ mutex_enter(&xprt->xp_thread_lock); xprt->xp_threads++; mutex_exit(&xprt->xp_thread_lock); /* Clear everything */ bzero(clone_xprt, sizeof (SVCXPRT)); /* Set pointer to the master transport stucture */ clone_xprt->xp_master = xprt; /* Structure copy of all the common fields */ clone_xprt->xp_xpc = xprt->xp_xpc; /* Restore per-thread fields (xp_cred) */ clone_xprt->xp_cred = cred; if (clone_xprt2) SVC_CLONE_XPRT(clone_xprt2, clone_xprt); } /* * Unlink a non-detached clone transport handle from a master * - decrement a thread reference count on the master * - if the transport is closing (xp_wq is NULL) call svc_xprt_cleanup(); * if this is the last non-detached/absolute thread on this transport * then it will close/destroy the transport * - call transport specific function to destroy the clone handle * - clear xp_master to avoid recursion. */ void svc_clone_unlink(SVCXPRT *clone_xprt) { SVCMASTERXPRT *xprt = clone_xprt->xp_master; /* This cannot be a detached thread */ ASSERT(!clone_xprt->xp_detached); ASSERT(xprt->xp_threads > 0); /* Decrement a reference count on the transport */ mutex_enter(&xprt->xp_thread_lock); xprt->xp_threads--; /* svc_xprt_cleanup() unlocks xp_thread_lock or destroys xprt */ if (xprt->xp_wq) mutex_exit(&xprt->xp_thread_lock); else svc_xprt_cleanup(xprt, FALSE); /* Call a transport specific clone `destroy' function */ SVC_CLONE_DESTROY(clone_xprt); /* Clear xp_master */ clone_xprt->xp_master = NULL; } /* * Unlink a detached clone transport handle from a master * - decrement the thread count on the master * - if the transport is closing (xp_wq is NULL) call svc_xprt_cleanup(); * if this is the last thread on this transport then it will destroy * the transport. * - call a transport specific function to destroy the clone handle * - clear xp_master to avoid recursion. */ static void svc_clone_unlinkdetached(SVCXPRT *clone_xprt) { SVCMASTERXPRT *xprt = clone_xprt->xp_master; /* This must be a detached thread */ ASSERT(clone_xprt->xp_detached); ASSERT(xprt->xp_detached_threads > 0); ASSERT(xprt->xp_threads + xprt->xp_detached_threads > 0); /* Grab xprt->xp_thread_lock and decrement link counts */ mutex_enter(&xprt->xp_thread_lock); xprt->xp_detached_threads--; /* svc_xprt_cleanup() unlocks xp_thread_lock or destroys xprt */ if (xprt->xp_wq) mutex_exit(&xprt->xp_thread_lock); else svc_xprt_cleanup(xprt, TRUE); /* Call transport specific clone `destroy' function */ SVC_CLONE_DESTROY(clone_xprt); /* Clear xp_master */ clone_xprt->xp_master = NULL; } /* * Try to exit a non-detached service thread * - check if there are enough threads left * - if this thread (ie its clone transport handle) are linked * to a master transport then unlink it * - free the clone structure * - return to userland for thread exit * * If this is the last non-detached or the last thread on this * transport then the call to svc_clone_unlink() will, respectively, * close and/or destroy the transport. */ static void svc_thread_exit(SVCPOOL *pool, SVCXPRT *clone_xprt) { if (clone_xprt->xp_master) svc_clone_unlink(clone_xprt); svc_clone_free(clone_xprt); mutex_enter(&pool->p_thread_lock); pool->p_threads--; if (pool->p_closing && svc_pool_tryexit(pool)) /* return - thread exit will be handled at user level */ return; mutex_exit(&pool->p_thread_lock); /* return - thread exit will be handled at user level */ } /* * Exit a detached service thread that returned to svc_run * - decrement the `detached thread' count for the pool * - unlink the detached clone transport handle from the master * - free the clone structure * - return to userland for thread exit * * If this is the last thread on this transport then the call * to svc_clone_unlinkdetached() will destroy the transport. */ static void svc_thread_exitdetached(SVCPOOL *pool, SVCXPRT *clone_xprt) { /* This must be a detached thread */ ASSERT(clone_xprt->xp_master); ASSERT(clone_xprt->xp_detached); ASSERT(!MUTEX_HELD(&pool->p_thread_lock)); svc_clone_unlinkdetached(clone_xprt); svc_clone_free(clone_xprt); mutex_enter(&pool->p_thread_lock); ASSERT(pool->p_reserved_threads >= 0); ASSERT(pool->p_detached_threads > 0); pool->p_detached_threads--; if (pool->p_closing && svc_pool_tryexit(pool)) /* return - thread exit will be handled at user level */ return; mutex_exit(&pool->p_thread_lock); /* return - thread exit will be handled at user level */ } /* * PSARC 2003/523 Contract Private Interface * svc_wait * Changes must be reviewed by Solaris File Sharing * Changes must be communicated to contract-2003-523@sun.com */ int svc_wait(int id) { SVCPOOL *pool; int err = 0; struct svc_globals *svc; svc = zone_getspecific(svc_zone_key, curproc->p_zone); mutex_enter(&svc->svc_plock); pool = svc_pool_find(svc, id); mutex_exit(&svc->svc_plock); if (pool == NULL) return (ENOENT); mutex_enter(&pool->p_user_lock); /* Check if there's already a user thread waiting on this pool */ if (pool->p_user_waiting) { mutex_exit(&pool->p_user_lock); return (EBUSY); } pool->p_user_waiting = TRUE; /* Go to sleep, waiting for the signaled flag. */ while (!pool->p_signal_create_thread && !pool->p_user_exit) { if (cv_wait_sig(&pool->p_user_cv, &pool->p_user_lock) == 0) { /* Interrupted, return to handle exit or signal */ pool->p_user_waiting = FALSE; pool->p_signal_create_thread = FALSE; mutex_exit(&pool->p_user_lock); /* * Thread has been interrupted and therefore * the service daemon is leaving as well so * let's go ahead and remove the service * pool at this time. */ mutex_enter(&svc->svc_plock); svc_pool_unregister(svc, pool); mutex_exit(&svc->svc_plock); return (EINTR); } } pool->p_signal_create_thread = FALSE; pool->p_user_waiting = FALSE; /* * About to exit the service pool. Set return value * to let the userland code know our intent. Signal * svc_thread_creator() so that it can clean up the * pool structure. */ if (pool->p_user_exit) { err = ECANCELED; cv_signal(&pool->p_user_cv); } mutex_exit(&pool->p_user_lock); /* Return to userland with error code, for possible thread creation. */ return (err); } /* * `Service threads' creator thread. * The creator thread waits for a signal to create new thread. */ static void svc_thread_creator(SVCPOOL *pool) { callb_cpr_t cpr_info; /* CPR info for the creator thread */ CALLB_CPR_INIT(&cpr_info, &pool->p_creator_lock, callb_generic_cpr, "svc_thread_creator"); for (;;) { mutex_enter(&pool->p_creator_lock); /* Check if someone set the exit flag */ if (pool->p_creator_exit) break; /* Clear the `signaled' flag and go asleep */ pool->p_creator_signaled = FALSE; CALLB_CPR_SAFE_BEGIN(&cpr_info); cv_wait(&pool->p_creator_cv, &pool->p_creator_lock); CALLB_CPR_SAFE_END(&cpr_info, &pool->p_creator_lock); /* Check if someone signaled to exit */ if (pool->p_creator_exit) break; mutex_exit(&pool->p_creator_lock); mutex_enter(&pool->p_thread_lock); /* * When the pool is in closing state and all the transports * are gone the creator should not create any new threads. */ if (pool->p_closing) { rw_enter(&pool->p_lrwlock, RW_READER); if (pool->p_lcount == 0) { rw_exit(&pool->p_lrwlock); mutex_exit(&pool->p_thread_lock); continue; } rw_exit(&pool->p_lrwlock); } /* * Create a new service thread now. */ ASSERT(pool->p_reserved_threads >= 0); ASSERT(pool->p_detached_threads >= 0); if (pool->p_threads + pool->p_detached_threads < pool->p_maxthreads) { /* * Signal the service pool wait thread * only if it hasn't already been signaled. */ mutex_enter(&pool->p_user_lock); if (pool->p_signal_create_thread == FALSE) { pool->p_signal_create_thread = TRUE; cv_signal(&pool->p_user_cv); } mutex_exit(&pool->p_user_lock); } mutex_exit(&pool->p_thread_lock); } /* * Pool is closed. Cleanup and exit. */ /* Signal userland creator thread that it can stop now. */ mutex_enter(&pool->p_user_lock); pool->p_user_exit = TRUE; cv_broadcast(&pool->p_user_cv); mutex_exit(&pool->p_user_lock); /* Wait for svc_wait() to be done with the pool */ mutex_enter(&pool->p_user_lock); while (pool->p_user_waiting) { CALLB_CPR_SAFE_BEGIN(&cpr_info); cv_wait(&pool->p_user_cv, &pool->p_user_lock); CALLB_CPR_SAFE_END(&cpr_info, &pool->p_creator_lock); } mutex_exit(&pool->p_user_lock); CALLB_CPR_EXIT(&cpr_info); svc_pool_cleanup(pool); zthread_exit(); } /* * If the creator thread is idle signal it to create * a new service thread. */ static void svc_creator_signal(SVCPOOL *pool) { mutex_enter(&pool->p_creator_lock); if (pool->p_creator_signaled == FALSE) { pool->p_creator_signaled = TRUE; cv_signal(&pool->p_creator_cv); } mutex_exit(&pool->p_creator_lock); } /* * Notify the creator thread to clean up and exit. */ static void svc_creator_signalexit(SVCPOOL *pool) { mutex_enter(&pool->p_creator_lock); pool->p_creator_exit = TRUE; cv_signal(&pool->p_creator_cv); mutex_exit(&pool->p_creator_lock); } /* * Polling part of the svc_run(). * - search for a transport with a pending request * - when one is found then latch the request lock and return to svc_run() * - if there is no request go asleep and wait for a signal * - handle two exceptions: * a) current transport is closing * b) timeout waiting for a new request * in both cases return to svc_run() */ static SVCMASTERXPRT * svc_poll(SVCPOOL *pool, SVCMASTERXPRT *xprt, SVCXPRT *clone_xprt) { /* * Main loop iterates until * a) we find a pending request, * b) detect that the current transport is closing * c) time out waiting for a new request. */ for (;;) { SVCMASTERXPRT *next; clock_t timeleft; /* * Step 1. * Check if there is a pending request on the current * transport handle so that we can avoid cloning. * If so then decrement the `pending-request' count for * the pool and return to svc_run(). * * We need to prevent a potential starvation. When * a selected transport has all pending requests coming in * all the time then the service threads will never switch to * another transport. With a limited number of service * threads some transports may be never serviced. * To prevent such a scenario we pick up at most * pool->p_max_same_xprt requests from the same transport * and then take a hint from the xprt-ready queue or walk * the transport list. */ if (xprt && xprt->xp_req_head && (!pool->p_qoverflow || clone_xprt->xp_same_xprt++ < pool->p_max_same_xprt)) { mutex_enter(&xprt->xp_req_lock); if (xprt->xp_req_head) { mutex_enter(&pool->p_req_lock); pool->p_reqs--; if (pool->p_reqs == 0) pool->p_qoverflow = FALSE; mutex_exit(&pool->p_req_lock); return (xprt); } mutex_exit(&xprt->xp_req_lock); } clone_xprt->xp_same_xprt = 0; /* * Step 2. * If there is no request on the current transport try to * find another transport with a pending request. */ mutex_enter(&pool->p_req_lock); pool->p_walkers++; mutex_exit(&pool->p_req_lock); /* * Make sure that transports will not be destroyed just * while we are checking them. */ rw_enter(&pool->p_lrwlock, RW_READER); for (;;) { SVCMASTERXPRT *hint; /* * Get the next transport from the xprt-ready queue. * This is a hint. There is no guarantee that the * transport still has a pending request since it * could be picked up by another thread in step 1. * * If the transport has a pending request then keep * it locked. Decrement the `pending-requests' for * the pool and `walking-threads' counts, and return * to svc_run(). */ hint = svc_xprt_qget(pool); if (hint && hint->xp_req_head) { mutex_enter(&hint->xp_req_lock); if (hint->xp_req_head) { rw_exit(&pool->p_lrwlock); mutex_enter(&pool->p_req_lock); pool->p_reqs--; if (pool->p_reqs == 0) pool->p_qoverflow = FALSE; pool->p_walkers--; mutex_exit(&pool->p_req_lock); return (hint); } mutex_exit(&hint->xp_req_lock); } /* * If there was no hint in the xprt-ready queue then * - if there is less pending requests than polling * threads go asleep * - otherwise check if there was an overflow in the * xprt-ready queue; if so, then we need to break * the `drain' mode */ if (hint == NULL) { if (pool->p_reqs < pool->p_walkers) { mutex_enter(&pool->p_req_lock); if (pool->p_reqs < pool->p_walkers) goto sleep; mutex_exit(&pool->p_req_lock); } if (pool->p_qoverflow) { break; } } } /* * If there was an overflow in the xprt-ready queue then we * need to switch to the `drain' mode, i.e. walk through the * pool's transport list and search for a transport with a * pending request. If we manage to drain all the pending * requests then we can clear the overflow flag. This will * switch svc_poll() back to taking hints from the xprt-ready * queue (which is generally more efficient). * * If there are no registered transports simply go asleep. */ if (xprt == NULL && pool->p_lhead == NULL) { mutex_enter(&pool->p_req_lock); goto sleep; } /* * `Walk' through the pool's list of master server * transport handles. Continue to loop until there are less * looping threads then pending requests. */ next = xprt ? xprt->xp_next : pool->p_lhead; for (;;) { /* * Check if there is a request on this transport. * * Since blocking on a locked mutex is very expensive * check for a request without a lock first. If we miss * a request that is just being delivered but this will * cost at most one full walk through the list. */ if (next->xp_req_head) { /* * Check again, now with a lock. */ mutex_enter(&next->xp_req_lock); if (next->xp_req_head) { rw_exit(&pool->p_lrwlock); mutex_enter(&pool->p_req_lock); pool->p_reqs--; if (pool->p_reqs == 0) pool->p_qoverflow = FALSE; pool->p_walkers--; mutex_exit(&pool->p_req_lock); return (next); } mutex_exit(&next->xp_req_lock); } /* * Continue to `walk' through the pool's * transport list until there is less requests * than walkers. Check this condition without * a lock first to avoid contention on a mutex. */ if (pool->p_reqs < pool->p_walkers) { /* Check again, now with the lock. */ mutex_enter(&pool->p_req_lock); if (pool->p_reqs < pool->p_walkers) break; /* goto sleep */ mutex_exit(&pool->p_req_lock); } next = next->xp_next; } sleep: /* * No work to do. Stop the `walk' and go asleep. * Decrement the `walking-threads' count for the pool. */ pool->p_walkers--; rw_exit(&pool->p_lrwlock); /* * Count us as asleep, mark this thread as safe * for suspend and wait for a request. */ pool->p_asleep++; timeleft = cv_reltimedwait_sig(&pool->p_req_cv, &pool->p_req_lock, pool->p_timeout, TR_CLOCK_TICK); /* * If the drowsy flag is on this means that * someone has signaled a wakeup. In such a case * the `asleep-threads' count has already updated * so just clear the flag. * * If the drowsy flag is off then we need to update * the `asleep-threads' count. */ if (pool->p_drowsy) { pool->p_drowsy = FALSE; /* * If the thread is here because it timedout, * instead of returning SVC_ETIMEDOUT, it is * time to do some more work. */ if (timeleft == -1) timeleft = 1; } else { pool->p_asleep--; } mutex_exit(&pool->p_req_lock); /* * If we received a signal while waiting for a * request, inform svc_run(), so that we can return * to user level and exit. */ if (timeleft == 0) return (SVC_EINTR); /* * If the current transport is gone then notify * svc_run() to unlink from it. */ if (xprt && xprt->xp_wq == NULL) return (SVC_EXPRTGONE); /* * If we have timed out waiting for a request inform * svc_run() that we probably don't need this thread. */ if (timeleft == -1) return (SVC_ETIMEDOUT); } } /* * Main loop of the kernel RPC server * - wait for input (find a transport with a pending request). * - dequeue the request * - call a registered server routine to process the requests * * There can many threads running concurrently in this loop * on the same or on different transports. */ static int svc_run(SVCPOOL *pool) { SVCMASTERXPRT *xprt = NULL; /* master transport handle */ SVCXPRT *clone_xprt; /* clone for this thread */ proc_t *p = ttoproc(curthread); /* Allocate a clone transport handle for this thread */ clone_xprt = svc_clone_init(); /* * The loop iterates until the thread becomes * idle too long or the transport is gone. */ for (;;) { SVCMASTERXPRT *next; mblk_t *mp; TRACE_0(TR_FAC_KRPC, TR_SVC_RUN, "svc_run"); /* * If the process is exiting/killed, return * immediately without processing any more * requests. */ if (p->p_flag & (SEXITING | SKILLED)) { svc_thread_exit(pool, clone_xprt); return (EINTR); } /* Find a transport with a pending request */ next = svc_poll(pool, xprt, clone_xprt); /* * If svc_poll() finds a transport with a request * it latches xp_req_lock on it. Therefore we need * to dequeue the request and release the lock as * soon as possible. */ ASSERT(next != NULL && (next == SVC_EXPRTGONE || next == SVC_ETIMEDOUT || next == SVC_EINTR || MUTEX_HELD(&next->xp_req_lock))); /* Ooops! Current transport is closing. Unlink now */ if (next == SVC_EXPRTGONE) { svc_clone_unlink(clone_xprt); xprt = NULL; continue; } /* Ooops! Timeout while waiting for a request. Exit */ if (next == SVC_ETIMEDOUT) { svc_thread_exit(pool, clone_xprt); return (0); } /* * Interrupted by a signal while waiting for a * request. Return to userspace and exit. */ if (next == SVC_EINTR) { svc_thread_exit(pool, clone_xprt); return (EINTR); } /* * De-queue the request and release the request lock * on this transport (latched by svc_poll()). */ mp = next->xp_req_head; next->xp_req_head = mp->b_next; mp->b_next = (mblk_t *)0; TRACE_2(TR_FAC_KRPC, TR_NFSFP_QUE_REQ_DEQ, "rpc_que_req_deq:pool %p mp %p", pool, mp); mutex_exit(&next->xp_req_lock); /* * If this is a new request on a current transport then * the clone structure is already properly initialized. * Otherwise, if the request is on a different transport, * unlink from the current master and link to * the one we got a request on. */ if (next != xprt) { if (xprt) svc_clone_unlink(clone_xprt); svc_clone_link(next, clone_xprt, NULL); xprt = next; } /* * If there are more requests and req_cv hasn't * been signaled yet then wake up one more thread now. * * We avoid signaling req_cv until the most recently * signaled thread wakes up and gets CPU to clear * the `drowsy' flag. */ if (!(pool->p_drowsy || pool->p_reqs <= pool->p_walkers || pool->p_asleep == 0)) { mutex_enter(&pool->p_req_lock); if (pool->p_drowsy || pool->p_reqs <= pool->p_walkers || pool->p_asleep == 0) mutex_exit(&pool->p_req_lock); else { pool->p_asleep--; pool->p_drowsy = TRUE; cv_signal(&pool->p_req_cv); mutex_exit(&pool->p_req_lock); } } /* * If there are no asleep/signaled threads, we are * still below pool->p_maxthreads limit, and no thread is * currently being created then signal the creator * for one more service thread. * * The asleep and drowsy checks are not protected * by a lock since it hurts performance and a wrong * decision is not essential. */ if (pool->p_asleep == 0 && !pool->p_drowsy && pool->p_threads + pool->p_detached_threads < pool->p_maxthreads) svc_creator_signal(pool); /* * Process the request. */ svc_getreq(clone_xprt, mp); /* If thread had a reservation it should have been canceled */ ASSERT(!clone_xprt->xp_reserved); /* * If the clone is marked detached then exit. * The rpcmod slot has already been released * when we detached this thread. */ if (clone_xprt->xp_detached) { svc_thread_exitdetached(pool, clone_xprt); return (0); } /* * Release our reference on the rpcmod * slot attached to xp_wq->q_ptr. */ (*RELE_PROC(xprt)) (clone_xprt->xp_wq, NULL); } /* NOTREACHED */ } /* * Flush any pending requests for the queue and * and free the associated mblks. */ void svc_queueclean(queue_t *q) { SVCMASTERXPRT *xprt = ((void **) q->q_ptr)[0]; mblk_t *mp; SVCPOOL *pool; /* * clean up the requests */ mutex_enter(&xprt->xp_req_lock); pool = xprt->xp_pool; while ((mp = xprt->xp_req_head) != NULL) { /* remove the request from the list and decrement p_reqs */ xprt->xp_req_head = mp->b_next; mutex_enter(&pool->p_req_lock); mp->b_next = (mblk_t *)0; pool->p_reqs--; mutex_exit(&pool->p_req_lock); (*RELE_PROC(xprt)) (xprt->xp_wq, mp); } mutex_exit(&xprt->xp_req_lock); } /* * This routine is called by rpcmod to inform kernel RPC that a * queue is closing. It is called after all the requests have been * picked up (that is after all the slots on the queue have * been released by kernel RPC). It is also guaranteed that no more * request will be delivered on this transport. * * - clear xp_wq to mark the master server transport handle as closing * - if there are no more threads on this transport close/destroy it * - otherwise, leave the linked threads to close/destroy the transport * later. */ void svc_queueclose(queue_t *q) { SVCMASTERXPRT *xprt = ((void **) q->q_ptr)[0]; if (xprt == NULL) { /* * If there is no master xprt associated with this stream, * then there is nothing to do. This happens regularly * with connection-oriented listening streams created by * nfsd. */ return; } mutex_enter(&xprt->xp_thread_lock); ASSERT(xprt->xp_req_head == NULL); ASSERT(xprt->xp_wq != NULL); xprt->xp_wq = NULL; if (xprt->xp_threads == 0) { SVCPOOL *pool = xprt->xp_pool; /* * svc_xprt_cleanup() destroys the transport * or releases the transport thread lock */ svc_xprt_cleanup(xprt, FALSE); mutex_enter(&pool->p_thread_lock); /* * If the pool is in closing state and this was * the last transport in the pool then signal the creator * thread to clean up and exit. */ if (pool->p_closing && svc_pool_tryexit(pool)) { return; } mutex_exit(&pool->p_thread_lock); } else { /* * There are still some threads linked to the transport. They * are very likely sleeping in svc_poll(). We could wake up * them by broadcasting on the p_req_cv condition variable, but * that might give us a performance penalty if there are too * many sleeping threads. * * Instead, we do nothing here. The linked threads will unlink * themselves and destroy the transport once they are woken up * on timeout, or by new request. There is no reason to hurry * up now with the thread wake up. */ /* * NOTICE: No references to the master transport structure * beyond this point! */ mutex_exit(&xprt->xp_thread_lock); } } /* * Interrupt `request delivery' routine called from rpcmod * - put a request at the tail of the transport request queue * - insert a hint for svc_poll() into the xprt-ready queue * - increment the `pending-requests' count for the pool * - wake up a thread sleeping in svc_poll() if necessary * - if all the threads are running ask the creator for a new one. */ void svc_queuereq(queue_t *q, mblk_t *mp) { SVCMASTERXPRT *xprt = ((void **) q->q_ptr)[0]; SVCPOOL *pool = xprt->xp_pool; TRACE_0(TR_FAC_KRPC, TR_SVC_QUEUEREQ_START, "svc_queuereq_start"); ASSERT(!is_system_labeled() || msg_getcred(mp, NULL) != NULL || mp->b_datap->db_type != M_DATA); /* * Step 1. * Grab the transport's request lock and the * pool's request lock so that when we put * the request at the tail of the transport's * request queue, possibly put the request on * the xprt ready queue and increment the * pending request count it looks atomic. */ mutex_enter(&xprt->xp_req_lock); mutex_enter(&pool->p_req_lock); if (xprt->xp_req_head == NULL) xprt->xp_req_head = mp; else xprt->xp_req_tail->b_next = mp; xprt->xp_req_tail = mp; /* * Step 2. * Insert a hint into the xprt-ready queue, increment * `pending-requests' count for the pool, and wake up * a thread sleeping in svc_poll() if necessary. */ /* Insert pointer to this transport into the xprt-ready queue */ svc_xprt_qput(pool, xprt); /* Increment the `pending-requests' count for the pool */ pool->p_reqs++; TRACE_2(TR_FAC_KRPC, TR_NFSFP_QUE_REQ_ENQ, "rpc_que_req_enq:pool %p mp %p", pool, mp); /* * If there are more requests and req_cv hasn't * been signaled yet then wake up one more thread now. * * We avoid signaling req_cv until the most recently * signaled thread wakes up and gets CPU to clear * the `drowsy' flag. */ if (pool->p_drowsy || pool->p_reqs <= pool->p_walkers || pool->p_asleep == 0) { mutex_exit(&pool->p_req_lock); } else { pool->p_drowsy = TRUE; pool->p_asleep--; /* * Signal wakeup and drop the request lock. */ cv_signal(&pool->p_req_cv); mutex_exit(&pool->p_req_lock); } mutex_exit(&xprt->xp_req_lock); /* * Step 3. * If there are no asleep/signaled threads, we are * still below pool->p_maxthreads limit, and no thread is * currently being created then signal the creator * for one more service thread. * * The asleep and drowsy checks are not not protected * by a lock since it hurts performance and a wrong * decision is not essential. */ if (pool->p_asleep == 0 && !pool->p_drowsy && pool->p_threads + pool->p_detached_threads < pool->p_maxthreads) svc_creator_signal(pool); TRACE_1(TR_FAC_KRPC, TR_SVC_QUEUEREQ_END, "svc_queuereq_end:(%S)", "end"); } /* * Reserve a service thread so that it can be detached later. * This reservation is required to make sure that when it tries to * detach itself the total number of detached threads does not exceed * pool->p_maxthreads - pool->p_redline (i.e. that we can have * up to pool->p_redline non-detached threads). * * If the thread does not detach itself later, it should cancel the * reservation before returning to svc_run(). * * - check if there is room for more reserved/detached threads * - if so, then increment the `reserved threads' count for the pool * - mark the thread as reserved (setting the flag in the clone transport * handle for this thread * - returns 1 if the reservation succeeded, 0 if it failed. */ int svc_reserve_thread(SVCXPRT *clone_xprt) { SVCPOOL *pool = clone_xprt->xp_master->xp_pool; /* Recursive reservations are not allowed */ ASSERT(!clone_xprt->xp_reserved); ASSERT(!clone_xprt->xp_detached); /* Check pool counts if there is room for reservation */ mutex_enter(&pool->p_thread_lock); if (pool->p_reserved_threads + pool->p_detached_threads >= pool->p_maxthreads - pool->p_redline) { mutex_exit(&pool->p_thread_lock); return (0); } pool->p_reserved_threads++; mutex_exit(&pool->p_thread_lock); /* Mark the thread (clone handle) as reserved */ clone_xprt->xp_reserved = TRUE; return (1); } /* * Cancel a reservation for a thread. * - decrement the `reserved threads' count for the pool * - clear the flag in the clone transport handle for this thread. */ void svc_unreserve_thread(SVCXPRT *clone_xprt) { SVCPOOL *pool = clone_xprt->xp_master->xp_pool; /* Thread must have a reservation */ ASSERT(clone_xprt->xp_reserved); ASSERT(!clone_xprt->xp_detached); /* Decrement global count */ mutex_enter(&pool->p_thread_lock); pool->p_reserved_threads--; mutex_exit(&pool->p_thread_lock); /* Clear reservation flag */ clone_xprt->xp_reserved = FALSE; } /* * Detach a thread from its transport, so that it can block for an * extended time. Because the transport can be closed after the thread is * detached, the thread should have already sent off a reply if it was * going to send one. * * - decrement `non-detached threads' count and increment `detached threads' * counts for the transport * - decrement the `non-detached threads' and `reserved threads' * counts and increment the `detached threads' count for the pool * - release the rpcmod slot * - mark the clone (thread) as detached. * * No need to return a pointer to the thread's CPR information, since * the thread has a userland identity. * * NOTICE: a thread must not detach itself without making a prior reservation * through svc_thread_reserve(). */ callb_cpr_t * svc_detach_thread(SVCXPRT *clone_xprt) { SVCMASTERXPRT *xprt = clone_xprt->xp_master; SVCPOOL *pool = xprt->xp_pool; /* Thread must have a reservation */ ASSERT(clone_xprt->xp_reserved); ASSERT(!clone_xprt->xp_detached); /* Bookkeeping for this transport */ mutex_enter(&xprt->xp_thread_lock); xprt->xp_threads--; xprt->xp_detached_threads++; mutex_exit(&xprt->xp_thread_lock); /* Bookkeeping for the pool */ mutex_enter(&pool->p_thread_lock); pool->p_threads--; pool->p_reserved_threads--; pool->p_detached_threads++; mutex_exit(&pool->p_thread_lock); /* Release an rpcmod slot for this request */ (*RELE_PROC(xprt)) (clone_xprt->xp_wq, NULL); /* Mark the clone (thread) as detached */ clone_xprt->xp_reserved = FALSE; clone_xprt->xp_detached = TRUE; return (NULL); } /* * This routine is responsible for extracting RDMA plugin master XPRT, * unregister from the SVCPOOL and initiate plugin specific cleanup. * It is passed a list/group of rdma transports as records which are * active in a given registered or unregistered kRPC thread pool. Its shuts * all active rdma transports in that pool. If the thread active on the trasport * happens to be last thread for that pool, it will signal the creater thread * to cleanup the pool and destroy the xprt in svc_queueclose() */ void rdma_stop(rdma_xprt_group_t *rdma_xprts) { SVCMASTERXPRT *xprt; rdma_xprt_record_t *curr_rec; queue_t *q; mblk_t *mp; int i, rtg_count; SVCPOOL *pool; if (rdma_xprts->rtg_count == 0) return; rtg_count = rdma_xprts->rtg_count; for (i = 0; i < rtg_count; i++) { curr_rec = rdma_xprts->rtg_listhead; rdma_xprts->rtg_listhead = curr_rec->rtr_next; rdma_xprts->rtg_count--; curr_rec->rtr_next = NULL; xprt = curr_rec->rtr_xprt_ptr; q = xprt->xp_wq; svc_rdma_kstop(xprt); mutex_enter(&xprt->xp_req_lock); pool = xprt->xp_pool; while ((mp = xprt->xp_req_head) != NULL) { /* * remove the request from the list and * decrement p_reqs */ xprt->xp_req_head = mp->b_next; mutex_enter(&pool->p_req_lock); mp->b_next = (mblk_t *)0; pool->p_reqs--; mutex_exit(&pool->p_req_lock); if (mp) { rdma_recv_data_t *rdp = (rdma_recv_data_t *) mp->b_rptr; RDMA_BUF_FREE(rdp->conn, &rdp->rpcmsg); RDMA_REL_CONN(rdp->conn); freemsg(mp); } } mutex_exit(&xprt->xp_req_lock); svc_queueclose(q); #ifdef DEBUG if (rdma_check) cmn_err(CE_NOTE, "rdma_stop: Exited svc_queueclose\n"); #endif /* * Free the rdma transport record for the expunged rdma * based master transport handle. */ kmem_free(curr_rec, sizeof (rdma_xprt_record_t)); if (!rdma_xprts->rtg_listhead) break; } } /* * rpc_msg_dup/rpc_msg_free * Currently only used by svc_rpcsec_gss.c but put in this file as it * may be useful to others in the future. * But future consumers should be careful cuz so far * - only tested/used for call msgs (not reply) * - only tested/used with call verf oa_length==0 */ struct rpc_msg * rpc_msg_dup(struct rpc_msg *src) { struct rpc_msg *dst; struct opaque_auth oa_src, oa_dst; dst = kmem_alloc(sizeof (*dst), KM_SLEEP); dst->rm_xid = src->rm_xid; dst->rm_direction = src->rm_direction; dst->rm_call.cb_rpcvers = src->rm_call.cb_rpcvers; dst->rm_call.cb_prog = src->rm_call.cb_prog; dst->rm_call.cb_vers = src->rm_call.cb_vers; dst->rm_call.cb_proc = src->rm_call.cb_proc; /* dup opaque auth call body cred */ oa_src = src->rm_call.cb_cred; oa_dst.oa_flavor = oa_src.oa_flavor; oa_dst.oa_base = kmem_alloc(oa_src.oa_length, KM_SLEEP); bcopy(oa_src.oa_base, oa_dst.oa_base, oa_src.oa_length); oa_dst.oa_length = oa_src.oa_length; dst->rm_call.cb_cred = oa_dst; /* dup or just alloc opaque auth call body verifier */ if (src->rm_call.cb_verf.oa_length > 0) { oa_src = src->rm_call.cb_verf; oa_dst.oa_flavor = oa_src.oa_flavor; oa_dst.oa_base = kmem_alloc(oa_src.oa_length, KM_SLEEP); bcopy(oa_src.oa_base, oa_dst.oa_base, oa_src.oa_length); oa_dst.oa_length = oa_src.oa_length; dst->rm_call.cb_verf = oa_dst; } else { oa_dst.oa_flavor = -1; /* will be set later */ oa_dst.oa_base = kmem_alloc(MAX_AUTH_BYTES, KM_SLEEP); oa_dst.oa_length = 0; /* will be set later */ dst->rm_call.cb_verf = oa_dst; } return (dst); error: kmem_free(dst->rm_call.cb_cred.oa_base, dst->rm_call.cb_cred.oa_length); kmem_free(dst, sizeof (*dst)); return (NULL); } void rpc_msg_free(struct rpc_msg **msg, int cb_verf_oa_length) { struct rpc_msg *m = *msg; kmem_free(m->rm_call.cb_cred.oa_base, m->rm_call.cb_cred.oa_length); m->rm_call.cb_cred.oa_base = NULL; m->rm_call.cb_cred.oa_length = 0; kmem_free(m->rm_call.cb_verf.oa_base, cb_verf_oa_length); m->rm_call.cb_verf.oa_base = NULL; m->rm_call.cb_verf.oa_length = 0; kmem_free(m, sizeof (*m)); m = NULL; }