/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */ /* All Rights Reserved */ #include #include #include #include #include #include #include #include #include #include /* only needed for kludge in sigwaiting_send() */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* MUST be contiguous */ k_sigset_t nullsmask = {0, 0}; k_sigset_t fillset = {FILLSET0, FILLSET1}; k_sigset_t cantmask = {CANTMASK0, CANTMASK1}; k_sigset_t cantreset = {(sigmask(SIGILL)|sigmask(SIGTRAP)|sigmask(SIGPWR)), 0}; k_sigset_t ignoredefault = {(sigmask(SIGCONT)|sigmask(SIGCLD)|sigmask(SIGPWR) |sigmask(SIGWINCH)|sigmask(SIGURG)|sigmask(SIGWAITING)), (sigmask(SIGLWP)|sigmask(SIGCANCEL)|sigmask(SIGFREEZE) |sigmask(SIGTHAW)|sigmask(SIGXRES)|sigmask(SIGJVM1) |sigmask(SIGJVM2))}; k_sigset_t stopdefault = {(sigmask(SIGSTOP)|sigmask(SIGTSTP) |sigmask(SIGTTOU)|sigmask(SIGTTIN)), 0}; k_sigset_t coredefault = {(sigmask(SIGQUIT)|sigmask(SIGILL)|sigmask(SIGTRAP) |sigmask(SIGIOT)|sigmask(SIGEMT)|sigmask(SIGFPE) |sigmask(SIGBUS)|sigmask(SIGSEGV)|sigmask(SIGSYS) |sigmask(SIGXCPU)|sigmask(SIGXFSZ)), 0}; k_sigset_t holdvfork = {(sigmask(SIGTTOU)|sigmask(SIGTTIN)|sigmask(SIGTSTP)), 0}; static int isjobstop(int); static void post_sigcld(proc_t *, sigqueue_t *); /* * Internal variables for counting number of user thread stop requests posted. * They may not be accurate at some special situation such as that a virtually * stopped thread starts to run. */ static int num_utstop; /* * Internal variables for broadcasting an event when all thread stop requests * are processed. */ static kcondvar_t utstop_cv; static kmutex_t thread_stop_lock; void del_one_utstop(void); /* * Send the specified signal to the specified process. */ void psignal(proc_t *p, int sig) { mutex_enter(&p->p_lock); sigtoproc(p, NULL, sig); mutex_exit(&p->p_lock); } /* * Send the specified signal to the specified thread. */ void tsignal(kthread_t *t, int sig) { proc_t *p = ttoproc(t); mutex_enter(&p->p_lock); sigtoproc(p, t, sig); mutex_exit(&p->p_lock); } int signal_is_blocked(kthread_t *t, int sig) { return (sigismember(&t->t_hold, sig) || (schedctl_sigblock(t) && !sigismember(&cantmask, sig))); } /* * Return true if the signal can safely be discarded on generation. * That is, if there is no need for the signal on the receiving end. * The answer is true if the process is a zombie or * if all of these conditions are true: * the signal is being ignored * the process is single-threaded * the signal is not being traced by /proc * the signal is not blocked by the process * the signal is not being accepted via sigwait() */ static int sig_discardable(proc_t *p, int sig) { kthread_t *t = p->p_tlist; return (t == NULL || /* if zombie or ... */ (sigismember(&p->p_ignore, sig) && /* signal is ignored */ t->t_forw == t && /* and single-threaded */ !tracing(p, sig) && /* and no /proc tracing */ !signal_is_blocked(t, sig) && /* and signal not blocked */ !sigismember(&t->t_sigwait, sig))); /* and not being accepted */ } /* * Return true if this thread is going to eat this signal soon. * Note that, if the signal is SIGKILL, we force stopped threads to be * set running (to make SIGKILL be a sure kill), but only if the process * is not currently locked by /proc (the P_PR_LOCK flag). Code in /proc * relies on the fact that a process will not change shape while P_PR_LOCK * is set (it drops and reacquires p->p_lock while leaving P_PR_LOCK set). * We wish that we could simply call prbarrier() below, in sigtoproc(), to * ensure that the process is not locked by /proc, but prbarrier() drops * and reacquires p->p_lock and dropping p->p_lock here would be damaging. */ int eat_signal(kthread_t *t, int sig) { int rval = 0; ASSERT(THREAD_LOCK_HELD(t)); /* * Do not do anything if the target thread has the signal blocked. */ if (!signal_is_blocked(t, sig)) { t->t_sig_check = 1; /* have thread do an issig */ if (ISWAKEABLE(t) || ISWAITING(t)) { setrun_locked(t); rval = 1; } else if (t->t_state == TS_STOPPED && sig == SIGKILL && !(ttoproc(t)->p_proc_flag & P_PR_LOCK)) { ttoproc(t)->p_stopsig = 0; t->t_dtrace_stop = 0; t->t_schedflag |= TS_XSTART | TS_PSTART; setrun_locked(t); } else if (t != curthread && t->t_state == TS_ONPROC) { aston(t); /* make it do issig promptly */ if (t->t_cpu != CPU) poke_cpu(t->t_cpu->cpu_id); rval = 1; } else if (t->t_state == TS_RUN) { rval = 1; } } return (rval); } /* * Post a signal. * If a non-null thread pointer is passed, then post the signal * to the thread/lwp, otherwise post the signal to the process. */ void sigtoproc(proc_t *p, kthread_t *t, int sig) { kthread_t *tt; int ext = !(curproc->p_flag & SSYS) && (curproc->p_ct_process != p->p_ct_process); ASSERT(MUTEX_HELD(&p->p_lock)); if (sig <= 0 || sig >= NSIG) return; /* * Regardless of origin or directedness, * SIGKILL kills all lwps in the process immediately * and jobcontrol signals affect all lwps in the process. */ if (sig == SIGKILL) { p->p_flag |= SKILLED | (ext ? SEXTKILLED : 0); t = NULL; } else if (sig == SIGCONT) { /* * The SSCONT flag will remain set until a stopping * signal comes in (below). This is harmless. */ p->p_flag |= SSCONT; sigdelq(p, NULL, SIGSTOP); sigdelq(p, NULL, SIGTSTP); sigdelq(p, NULL, SIGTTOU); sigdelq(p, NULL, SIGTTIN); sigdiffset(&p->p_sig, &stopdefault); sigdiffset(&p->p_extsig, &stopdefault); p->p_stopsig = 0; if ((tt = p->p_tlist) != NULL) { do { sigdelq(p, tt, SIGSTOP); sigdelq(p, tt, SIGTSTP); sigdelq(p, tt, SIGTTOU); sigdelq(p, tt, SIGTTIN); sigdiffset(&tt->t_sig, &stopdefault); sigdiffset(&tt->t_extsig, &stopdefault); } while ((tt = tt->t_forw) != p->p_tlist); } if ((tt = p->p_tlist) != NULL) { do { thread_lock(tt); if (tt->t_state == TS_STOPPED && tt->t_whystop == PR_JOBCONTROL) { tt->t_schedflag |= TS_XSTART; setrun_locked(tt); } thread_unlock(tt); } while ((tt = tt->t_forw) != p->p_tlist); } } else if (sigismember(&stopdefault, sig)) { /* * This test has a race condition which we can't fix: * By the time the stopping signal is received by * the target process/thread, the signal handler * and/or the detached state might have changed. */ if (PTOU(p)->u_signal[sig-1] == SIG_DFL && (sig == SIGSTOP || !p->p_pgidp->pid_pgorphaned)) p->p_flag &= ~SSCONT; sigdelq(p, NULL, SIGCONT); sigdelset(&p->p_sig, SIGCONT); sigdelset(&p->p_extsig, SIGCONT); if ((tt = p->p_tlist) != NULL) { do { sigdelq(p, tt, SIGCONT); sigdelset(&tt->t_sig, SIGCONT); sigdelset(&tt->t_extsig, SIGCONT); } while ((tt = tt->t_forw) != p->p_tlist); } } if (sig_discardable(p, sig)) { DTRACE_PROC3(signal__discard, kthread_t *, p->p_tlist, proc_t *, p, int, sig); return; } if (t != NULL) { /* * This is a directed signal, wake up the lwp. */ sigaddset(&t->t_sig, sig); if (ext) sigaddset(&t->t_extsig, sig); thread_lock(t); (void) eat_signal(t, sig); thread_unlock(t); DTRACE_PROC2(signal__send, kthread_t *, t, int, sig); } else if ((tt = p->p_tlist) != NULL) { /* * Make sure that some lwp that already exists * in the process fields the signal soon. * Wake up an interruptibly sleeping lwp if necessary. * For SIGKILL make all of the lwps see the signal; * This is needed to guarantee a sure kill for processes * with a mix of realtime and non-realtime threads. */ int su = 0; sigaddset(&p->p_sig, sig); if (ext) sigaddset(&p->p_extsig, sig); do { thread_lock(tt); if (eat_signal(tt, sig) && sig != SIGKILL) { thread_unlock(tt); break; } if (SUSPENDED(tt)) su++; thread_unlock(tt); } while ((tt = tt->t_forw) != p->p_tlist); /* * If the process is deadlocked, make somebody run and die. */ if (sig == SIGKILL && p->p_stat != SIDL && p->p_lwprcnt == 0 && p->p_lwpcnt == su && !(p->p_proc_flag & P_PR_LOCK)) { thread_lock(tt); p->p_lwprcnt++; tt->t_schedflag |= TS_CSTART; setrun_locked(tt); thread_unlock(tt); } DTRACE_PROC2(signal__send, kthread_t *, tt, int, sig); } } static int isjobstop(int sig) { proc_t *p = ttoproc(curthread); ASSERT(MUTEX_HELD(&p->p_lock)); if (PTOU(curproc)->u_signal[sig-1] == SIG_DFL && sigismember(&stopdefault, sig)) { /* * If SIGCONT has been posted since we promoted this signal * from pending to current, then don't do a jobcontrol stop. */ if (!(p->p_flag & SSCONT) && (sig == SIGSTOP || !p->p_pgidp->pid_pgorphaned) && curthread != p->p_agenttp) { sigqueue_t *sqp; stop(PR_JOBCONTROL, sig); mutex_exit(&p->p_lock); sqp = kmem_zalloc(sizeof (sigqueue_t), KM_SLEEP); mutex_enter(&pidlock); /* * Only the first lwp to continue notifies the parent. */ if (p->p_pidflag & CLDCONT) siginfofree(sqp); else { p->p_pidflag |= CLDCONT; p->p_wcode = CLD_CONTINUED; p->p_wdata = SIGCONT; sigcld(p, sqp); } mutex_exit(&pidlock); mutex_enter(&p->p_lock); } return (1); } return (0); } /* * Returns true if the current process has a signal to process, and * the signal is not held. The signal to process is put in p_cursig. * This is asked at least once each time a process enters the system * (though this can usually be done without actually calling issig by * checking the pending signal masks). A signal does not do anything * directly to a process; it sets a flag that asks the process to do * something to itself. * * The "why" argument indicates the allowable side-effects of the call: * * FORREAL: Extract the next pending signal from p_sig into p_cursig; * stop the process if a stop has been requested or if a traced signal * is pending. * * JUSTLOOKING: Don't stop the process, just indicate whether or not * a signal might be pending (FORREAL is needed to tell for sure). * * XXX: Changes to the logic in these routines should be propagated * to lm_sigispending(). See bug 1201594. */ static int issig_forreal(void); static int issig_justlooking(void); int issig(int why) { ASSERT(why == FORREAL || why == JUSTLOOKING); return ((why == FORREAL)? issig_forreal() : issig_justlooking()); } static int issig_justlooking(void) { kthread_t *t = curthread; klwp_t *lwp = ttolwp(t); proc_t *p = ttoproc(t); k_sigset_t set; /* * This function answers the question: * "Is there any reason to call issig_forreal()?" * * We have to answer the question w/o grabbing any locks * because we are (most likely) being called after we * put ourselves on the sleep queue. */ if (t->t_dtrace_stop | t->t_dtrace_sig) return (1); /* * Another piece of complexity in this process. When single-stepping a * process, we don't want an intervening signal or TP_PAUSE request to * suspend the current thread. Otherwise, the controlling process will * hang beacuse we will be stopped with TS_PSTART set in t_schedflag. * We will trigger any remaining signals when we re-enter the kernel on * the single step trap. */ if (lwp->lwp_pcb.pcb_flags & NORMAL_STEP) return (0); if ((lwp->lwp_asleep && MUSTRETURN(p, t)) || (p->p_flag & (SEXITLWPS|SKILLED)) || (lwp->lwp_nostop == 0 && (p->p_stopsig | (p->p_flag & (SHOLDFORK1|SHOLDWATCH)) | (t->t_proc_flag & (TP_PRSTOP|TP_HOLDLWP|TP_CHKPT|TP_PAUSE)))) || lwp->lwp_cursig) return (1); if (p->p_flag & SVFWAIT) return (0); set = p->p_sig; sigorset(&set, &t->t_sig); if (schedctl_sigblock(t)) /* all blockable signals blocked */ sigandset(&set, &cantmask); else sigdiffset(&set, &t->t_hold); if (p->p_flag & SVFORK) sigdiffset(&set, &holdvfork); if (!sigisempty(&set)) { int sig; for (sig = 1; sig < NSIG; sig++) { if (sigismember(&set, sig) && (tracing(p, sig) || sigismember(&t->t_sigwait, sig) || !sigismember(&p->p_ignore, sig))) { /* * Don't promote a signal that will stop * the process when lwp_nostop is set. */ if (!lwp->lwp_nostop || PTOU(p)->u_signal[sig-1] != SIG_DFL || !sigismember(&stopdefault, sig)) return (1); } } } return (0); } static int issig_forreal(void) { int sig = 0, ext = 0; kthread_t *t = curthread; klwp_t *lwp = ttolwp(t); proc_t *p = ttoproc(t); int toproc = 0; int sigcld_found = 0; int nostop_break = 0; ASSERT(t->t_state == TS_ONPROC); mutex_enter(&p->p_lock); schedctl_finish_sigblock(t); if (t->t_dtrace_stop | t->t_dtrace_sig) { if (t->t_dtrace_stop) { /* * If DTrace's "stop" action has been invoked on us, * set TP_PRSTOP. */ t->t_proc_flag |= TP_PRSTOP; } if (t->t_dtrace_sig != 0) { k_siginfo_t info; /* * Post the signal generated as the result of * DTrace's "raise" action as a normal signal before * the full-fledged signal checking begins. */ bzero(&info, sizeof (info)); info.si_signo = t->t_dtrace_sig; info.si_code = SI_DTRACE; sigaddq(p, NULL, &info, KM_NOSLEEP); t->t_dtrace_sig = 0; } } for (;;) { if (p->p_flag & (SEXITLWPS|SKILLED)) { lwp->lwp_cursig = sig = SIGKILL; lwp->lwp_extsig = ext = (p->p_flag & SEXTKILLED) != 0; t->t_sig_check = 1; break; } /* * Another piece of complexity in this process. When * single-stepping a process, we don't want an intervening * signal or TP_PAUSE request to suspend the current thread. * Otherwise, the controlling process will hang beacuse we will * be stopped with TS_PSTART set in t_schedflag. We will * trigger any remaining signals when we re-enter the kernel on * the single step trap. */ if (lwp->lwp_pcb.pcb_flags & NORMAL_STEP) { sig = 0; break; } /* * Hold the lwp here for watchpoint manipulation. */ if ((t->t_proc_flag & TP_PAUSE) && !lwp->lwp_nostop) { stop(PR_SUSPENDED, SUSPEND_PAUSE); continue; } if (lwp->lwp_asleep && MUSTRETURN(p, t)) { if ((sig = lwp->lwp_cursig) != 0) { /* * Make sure we call ISSIG() in post_syscall() * to re-validate this current signal. */ t->t_sig_check = 1; } break; } /* * If the request is PR_CHECKPOINT, ignore the rest of signals * or requests. Honor other stop requests or signals later. * Go back to top of loop here to check if an exit or hold * event has occurred while stopped. */ if ((t->t_proc_flag & TP_CHKPT) && !lwp->lwp_nostop) { stop(PR_CHECKPOINT, 0); continue; } /* * Honor SHOLDFORK1, SHOLDWATCH, and TP_HOLDLWP before dealing * with signals or /proc. Another lwp is executing fork1(), * or is undergoing watchpoint activity (remapping a page), * or is executing lwp_suspend() on this lwp. * Again, go back to top of loop to check if an exit * or hold event has occurred while stopped. */ if (((p->p_flag & (SHOLDFORK1|SHOLDWATCH)) || (t->t_proc_flag & TP_HOLDLWP)) && !lwp->lwp_nostop) { stop(PR_SUSPENDED, SUSPEND_NORMAL); continue; } /* * Honor requested stop before dealing with the * current signal; a debugger may change it. * Do not want to go back to loop here since this is a special * stop that means: make incremental progress before the next * stop. The danger is that returning to top of loop would most * likely drop the thread right back here to stop soon after it * was continued, violating the incremental progress request. */ if ((t->t_proc_flag & TP_PRSTOP) && !lwp->lwp_nostop) stop(PR_REQUESTED, 0); /* * If a debugger wants us to take a signal it will have * left it in lwp->lwp_cursig. If lwp_cursig has been cleared * or if it's being ignored, we continue on looking for another * signal. Otherwise we return the specified signal, provided * it's not a signal that causes a job control stop. * * When stopped on PR_JOBCONTROL, there is no current * signal; we cancel lwp->lwp_cursig temporarily before * calling isjobstop(). The current signal may be reset * by a debugger while we are stopped in isjobstop(). * * If the current thread is accepting the signal * (via sigwait(), sigwaitinfo(), or sigtimedwait()), * we allow the signal to be accepted, even if it is * being ignored, and without causing a job control stop. */ if ((sig = lwp->lwp_cursig) != 0) { ext = lwp->lwp_extsig; lwp->lwp_cursig = 0; lwp->lwp_extsig = 0; if (sigismember(&t->t_sigwait, sig) || (!sigismember(&p->p_ignore, sig) && !isjobstop(sig))) { if (p->p_flag & (SEXITLWPS|SKILLED)) { sig = SIGKILL; ext = (p->p_flag & SEXTKILLED) != 0; } lwp->lwp_cursig = (uchar_t)sig; lwp->lwp_extsig = (uchar_t)ext; break; } /* * The signal is being ignored or it caused a * job-control stop. If another current signal * has not been established, return the current * siginfo, if any, to the memory manager. */ if (lwp->lwp_cursig == 0 && lwp->lwp_curinfo != NULL) { siginfofree(lwp->lwp_curinfo); lwp->lwp_curinfo = NULL; } /* * Loop around again in case we were stopped * on a job control signal and a /proc stop * request was posted or another current signal * was established while we were stopped. */ continue; } if (p->p_stopsig && !lwp->lwp_nostop && curthread != p->p_agenttp) { /* * Some lwp in the process has already stopped * showing PR_JOBCONTROL. This is a stop in * sympathy with the other lwp, even if this * lwp is blocking the stopping signal. */ stop(PR_JOBCONTROL, p->p_stopsig); continue; } /* * Loop on the pending signals until we find a * non-held signal that is traced or not ignored. * First check the signals pending for the lwp, * then the signals pending for the process as a whole. */ for (;;) { if ((sig = fsig(&t->t_sig, t)) != 0) { toproc = 0; if (tracing(p, sig) || sigismember(&t->t_sigwait, sig) || !sigismember(&p->p_ignore, sig)) { if (sigismember(&t->t_extsig, sig)) ext = 1; break; } sigdelset(&t->t_sig, sig); sigdelset(&t->t_extsig, sig); sigdelq(p, t, sig); } else if ((sig = fsig(&p->p_sig, t)) != 0) { if (sig == SIGCLD) sigcld_found = 1; toproc = 1; if (tracing(p, sig) || sigismember(&t->t_sigwait, sig) || !sigismember(&p->p_ignore, sig)) { if (sigismember(&p->p_extsig, sig)) ext = 1; break; } sigdelset(&p->p_sig, sig); sigdelset(&p->p_extsig, sig); sigdelq(p, NULL, sig); } else { /* no signal was found */ break; } } if (sig == 0) { /* no signal was found */ if (p->p_flag & (SEXITLWPS|SKILLED)) { lwp->lwp_cursig = SIGKILL; sig = SIGKILL; ext = (p->p_flag & SEXTKILLED) != 0; } break; } /* * If we have been informed not to stop (i.e., we are being * called from within a network operation), then don't promote * the signal at this time, just return the signal number. * We will call issig() again later when it is safe. * * fsig() does not return a jobcontrol stopping signal * with a default action of stopping the process if * lwp_nostop is set, so we won't be causing a bogus * EINTR by this action. (Such a signal is eaten by * isjobstop() when we loop around to do final checks.) */ if (lwp->lwp_nostop) { nostop_break = 1; break; } /* * Promote the signal from pending to current. * * Note that sigdeq() will set lwp->lwp_curinfo to NULL * if no siginfo_t exists for this signal. */ lwp->lwp_cursig = (uchar_t)sig; lwp->lwp_extsig = (uchar_t)ext; t->t_sig_check = 1; /* so post_syscall will see signal */ ASSERT(lwp->lwp_curinfo == NULL); sigdeq(p, toproc ? NULL : t, sig, &lwp->lwp_curinfo); if (tracing(p, sig)) stop(PR_SIGNALLED, sig); /* * Loop around to check for requested stop before * performing the usual current-signal actions. */ } mutex_exit(&p->p_lock); /* * If SIGCLD was dequeued from the process's signal queue, * search for other pending SIGCLD's from the list of children. */ if (sigcld_found) sigcld_repost(); if (sig != 0) (void) undo_watch_step(NULL); /* * If we have been blocked since the p_lock was dropped off * above, then this promoted signal might have been handled * already when we were on the way back from sleep queue, so * just ignore it. * If we have been informed not to stop, just return the signal * number. Also see comments above. */ if (!nostop_break) { sig = lwp->lwp_cursig; } return (sig != 0); } /* * Return true if the process is currently stopped showing PR_JOBCONTROL. * This is true only if all of the process's lwp's are so stopped. * If this is asked by one of the lwps in the process, exclude that lwp. */ int jobstopped(proc_t *p) { kthread_t *t; ASSERT(MUTEX_HELD(&p->p_lock)); if ((t = p->p_tlist) == NULL) return (0); do { thread_lock(t); /* ignore current, zombie and suspended lwps in the test */ if (!(t == curthread || t->t_state == TS_ZOMB || SUSPENDED(t)) && (t->t_state != TS_STOPPED || t->t_whystop != PR_JOBCONTROL)) { thread_unlock(t); return (0); } thread_unlock(t); } while ((t = t->t_forw) != p->p_tlist); return (1); } /* * Put ourself (curthread) into the stopped state and notify tracers. */ void stop(int why, int what) { kthread_t *t = curthread; proc_t *p = ttoproc(t); klwp_t *lwp = ttolwp(t); kthread_t *tx; lwpent_t *lep; int procstop; int flags = TS_ALLSTART; hrtime_t stoptime; /* * Can't stop a system process. */ if (p == NULL || lwp == NULL || (p->p_flag & SSYS) || p->p_as == &kas) return; ASSERT(MUTEX_HELD(&p->p_lock)); if (why != PR_SUSPENDED && why != PR_CHECKPOINT) { /* * Don't stop an lwp with SIGKILL pending. * Don't stop if the process or lwp is exiting. */ if (lwp->lwp_cursig == SIGKILL || sigismember(&t->t_sig, SIGKILL) || sigismember(&p->p_sig, SIGKILL) || (t->t_proc_flag & TP_LWPEXIT) || (p->p_flag & (SEXITLWPS|SKILLED))) { p->p_stopsig = 0; t->t_proc_flag &= ~(TP_PRSTOP|TP_PRVSTOP); return; } } /* * Make sure we don't deadlock on a recursive call to prstop(). * prstop() sets the lwp_nostop flag. */ if (lwp->lwp_nostop) return; /* * Make sure the lwp is in an orderly state for inspection * by a debugger through /proc or for dumping via core(). */ schedctl_finish_sigblock(t); t->t_proc_flag |= TP_STOPPING; /* must set before dropping p_lock */ mutex_exit(&p->p_lock); stoptime = gethrtime(); prstop(why, what); (void) undo_watch_step(NULL); mutex_enter(&p->p_lock); ASSERT(t->t_state == TS_ONPROC); switch (why) { case PR_CHECKPOINT: /* * The situation may have changed since we dropped * and reacquired p->p_lock. Double-check now * whether we should stop or not. */ if (!(t->t_proc_flag & TP_CHKPT)) { t->t_proc_flag &= ~TP_STOPPING; return; } t->t_proc_flag &= ~TP_CHKPT; flags &= ~TS_RESUME; break; case PR_JOBCONTROL: ASSERT(what == SIGSTOP || what == SIGTSTP || what == SIGTTIN || what == SIGTTOU); flags &= ~TS_XSTART; break; case PR_SUSPENDED: ASSERT(what == SUSPEND_NORMAL || what == SUSPEND_PAUSE); /* * The situation may have changed since we dropped * and reacquired p->p_lock. Double-check now * whether we should stop or not. */ if (what == SUSPEND_PAUSE) { if (!(t->t_proc_flag & TP_PAUSE)) { t->t_proc_flag &= ~TP_STOPPING; return; } flags &= ~TS_UNPAUSE; } else { if (!((t->t_proc_flag & TP_HOLDLWP) || (p->p_flag & (SHOLDFORK|SHOLDFORK1|SHOLDWATCH)))) { t->t_proc_flag &= ~TP_STOPPING; return; } /* * If SHOLDFORK is in effect and we are stopping * while asleep (not at the top of the stack), * we return now to allow the hold to take effect * when we reach the top of the kernel stack. */ if (lwp->lwp_asleep && (p->p_flag & SHOLDFORK)) { t->t_proc_flag &= ~TP_STOPPING; return; } flags &= ~TS_CSTART; } break; default: /* /proc stop */ flags &= ~TS_PSTART; /* * Do synchronous stop unless the async-stop flag is set. * If why is PR_REQUESTED and t->t_dtrace_stop flag is set, * then no debugger is present and we also do synchronous stop. */ if ((why != PR_REQUESTED || t->t_dtrace_stop) && !(p->p_proc_flag & P_PR_ASYNC)) { int notify; for (tx = t->t_forw; tx != t; tx = tx->t_forw) { notify = 0; thread_lock(tx); if (ISTOPPED(tx) || (tx->t_proc_flag & TP_PRSTOP)) { thread_unlock(tx); continue; } tx->t_proc_flag |= TP_PRSTOP; tx->t_sig_check = 1; if (tx->t_state == TS_SLEEP && (tx->t_flag & T_WAKEABLE)) { /* * Don't actually wake it up if it's * in one of the lwp_*() syscalls. * Mark it virtually stopped and * notify /proc waiters (below). */ if (tx->t_wchan0 == NULL) setrun_locked(tx); else { tx->t_proc_flag |= TP_PRVSTOP; tx->t_stoptime = stoptime; notify = 1; } } /* Move waiting thread to run queue */ if (ISWAITING(tx)) setrun_locked(tx); /* * force the thread into the kernel * if it is not already there. */ if (tx->t_state == TS_ONPROC && tx->t_cpu != CPU) poke_cpu(tx->t_cpu->cpu_id); thread_unlock(tx); lep = p->p_lwpdir[tx->t_dslot].ld_entry; if (notify && lep->le_trace) prnotify(lep->le_trace); } /* * We do this just in case one of the threads we asked * to stop is in holdlwps() (called from cfork()) or * lwp_suspend(). */ cv_broadcast(&p->p_holdlwps); } break; } t->t_stoptime = stoptime; if (why == PR_JOBCONTROL || (why == PR_SUSPENDED && p->p_stopsig)) { /* * Determine if the whole process is jobstopped. */ if (jobstopped(p)) { sigqueue_t *sqp; int sig; if ((sig = p->p_stopsig) == 0) p->p_stopsig = (uchar_t)(sig = what); mutex_exit(&p->p_lock); sqp = kmem_zalloc(sizeof (sigqueue_t), KM_SLEEP); mutex_enter(&pidlock); /* * The last lwp to stop notifies the parent. * Turn off the CLDCONT flag now so the first * lwp to continue knows what to do. */ p->p_pidflag &= ~CLDCONT; p->p_wcode = CLD_STOPPED; p->p_wdata = sig; sigcld(p, sqp); /* * Grab p->p_lock before releasing pidlock so the * parent and the child don't have a race condition. */ mutex_enter(&p->p_lock); mutex_exit(&pidlock); p->p_stopsig = 0; } else if (why == PR_JOBCONTROL && p->p_stopsig == 0) { /* * Set p->p_stopsig and wake up sleeping lwps * so they will stop in sympathy with this lwp. */ p->p_stopsig = (uchar_t)what; pokelwps(p); /* * We do this just in case one of the threads we asked * to stop is in holdlwps() (called from cfork()) or * lwp_suspend(). */ cv_broadcast(&p->p_holdlwps); } } if (why != PR_JOBCONTROL && why != PR_CHECKPOINT) { /* * Do process-level notification when all lwps are * either stopped on events of interest to /proc * or are stopped showing PR_SUSPENDED or are zombies. */ procstop = 1; for (tx = t->t_forw; procstop && tx != t; tx = tx->t_forw) { if (VSTOPPED(tx)) continue; thread_lock(tx); switch (tx->t_state) { case TS_ZOMB: break; case TS_STOPPED: /* neither ISTOPPED nor SUSPENDED? */ if ((tx->t_schedflag & (TS_CSTART | TS_UNPAUSE | TS_PSTART)) == (TS_CSTART | TS_UNPAUSE | TS_PSTART)) procstop = 0; break; case TS_SLEEP: /* not paused for watchpoints? */ if (!(tx->t_flag & T_WAKEABLE) || tx->t_wchan0 == NULL || !(tx->t_proc_flag & TP_PAUSE)) procstop = 0; break; default: procstop = 0; break; } thread_unlock(tx); } if (procstop) { /* there must not be any remapped watched pages now */ ASSERT(p->p_mapcnt == 0); if (p->p_proc_flag & P_PR_PTRACE) { /* ptrace() compatibility */ mutex_exit(&p->p_lock); mutex_enter(&pidlock); p->p_wcode = CLD_TRAPPED; p->p_wdata = (why == PR_SIGNALLED)? what : SIGTRAP; cv_broadcast(&p->p_parent->p_cv); /* * Grab p->p_lock before releasing pidlock so * parent and child don't have a race condition. */ mutex_enter(&p->p_lock); mutex_exit(&pidlock); } if (p->p_trace) /* /proc */ prnotify(p->p_trace); cv_broadcast(&pr_pid_cv[p->p_slot]); /* pauselwps() */ cv_broadcast(&p->p_holdlwps); /* holdwatch() */ } if (why != PR_SUSPENDED) { lep = p->p_lwpdir[t->t_dslot].ld_entry; if (lep->le_trace) /* /proc */ prnotify(lep->le_trace); /* * Special notification for creation of the agent lwp. */ if (t == p->p_agenttp && (t->t_proc_flag & TP_PRSTOP) && p->p_trace) prnotify(p->p_trace); /* * The situation may have changed since we dropped * and reacquired p->p_lock. Double-check now * whether we should stop or not. */ if (!(t->t_proc_flag & TP_STOPPING)) { if (t->t_proc_flag & TP_PRSTOP) t->t_proc_flag |= TP_STOPPING; } t->t_proc_flag &= ~(TP_PRSTOP|TP_PRVSTOP); prnostep(lwp); } } if (why == PR_SUSPENDED) { /* * We always broadcast in the case of SUSPEND_PAUSE. This is * because checks for TP_PAUSE take precedence over checks for * SHOLDWATCH. If a thread is trying to stop because of * SUSPEND_PAUSE and tries to do a holdwatch(), it will be * waiting for the rest of the threads to enter a stopped state. * If we are stopping for a SUSPEND_PAUSE, we may be the last * lwp and not know it, so broadcast just in case. */ if (what == SUSPEND_PAUSE || --p->p_lwprcnt == 0 || (t->t_proc_flag & TP_HOLDLWP)) cv_broadcast(&p->p_holdlwps); } /* * Need to do this here (rather than after the thread is officially * stopped) because we can't call mutex_enter from a stopped thread. */ if (why == PR_CHECKPOINT) del_one_utstop(); thread_lock(t); ASSERT((t->t_schedflag & TS_ALLSTART) == 0); t->t_schedflag |= flags; t->t_whystop = (short)why; t->t_whatstop = (short)what; CL_STOP(t, why, what); (void) new_mstate(t, LMS_STOPPED); thread_stop(t); /* set stop state and drop lock */ if (why != PR_SUSPENDED && why != PR_CHECKPOINT) { /* * We may have gotten a SIGKILL or a SIGCONT when * we released p->p_lock; make one last check. * Also check for a /proc run-on-last-close. */ if (sigismember(&t->t_sig, SIGKILL) || sigismember(&p->p_sig, SIGKILL) || (t->t_proc_flag & TP_LWPEXIT) || (p->p_flag & (SEXITLWPS|SKILLED))) { p->p_stopsig = 0; thread_lock(t); t->t_schedflag |= TS_XSTART | TS_PSTART; setrun_locked(t); thread_unlock_nopreempt(t); } else if (why == PR_JOBCONTROL) { if (p->p_flag & SSCONT) { /* * This resulted from a SIGCONT posted * while we were not holding p->p_lock. */ p->p_stopsig = 0; thread_lock(t); t->t_schedflag |= TS_XSTART; setrun_locked(t); thread_unlock_nopreempt(t); } } else if (!(t->t_proc_flag & TP_STOPPING)) { /* * This resulted from a /proc run-on-last-close. */ thread_lock(t); t->t_schedflag |= TS_PSTART; setrun_locked(t); thread_unlock_nopreempt(t); } } t->t_proc_flag &= ~TP_STOPPING; mutex_exit(&p->p_lock); swtch(); setallwatch(); /* reestablish any watchpoints set while stopped */ mutex_enter(&p->p_lock); prbarrier(p); /* barrier against /proc locking */ } /* Interface for resetting user thread stop count. */ void utstop_init(void) { mutex_enter(&thread_stop_lock); num_utstop = 0; mutex_exit(&thread_stop_lock); } /* Interface for registering a user thread stop request. */ void add_one_utstop(void) { mutex_enter(&thread_stop_lock); num_utstop++; mutex_exit(&thread_stop_lock); } /* Interface for cancelling a user thread stop request */ void del_one_utstop(void) { mutex_enter(&thread_stop_lock); num_utstop--; if (num_utstop == 0) cv_broadcast(&utstop_cv); mutex_exit(&thread_stop_lock); } /* Interface to wait for all user threads to be stopped */ void utstop_timedwait(clock_t ticks) { mutex_enter(&thread_stop_lock); if (num_utstop > 0) (void) cv_reltimedwait(&utstop_cv, &thread_stop_lock, ticks, TR_CLOCK_TICK); mutex_exit(&thread_stop_lock); } /* * Perform the action specified by the current signal. * The usual sequence is: * if (issig()) * psig(); * The signal bit has already been cleared by issig(), * the current signal number has been stored in lwp_cursig, * and the current siginfo is now referenced by lwp_curinfo. */ void psig(void) { kthread_t *t = curthread; proc_t *p = ttoproc(t); klwp_t *lwp = ttolwp(t); void (*func)(); int sig, rc, code, ext; pid_t pid = -1; id_t ctid = 0; zoneid_t zoneid = -1; sigqueue_t *sqp = NULL; mutex_enter(&p->p_lock); schedctl_finish_sigblock(t); code = CLD_KILLED; if (p->p_flag & SEXITLWPS) { lwp_exit(); return; /* not reached */ } sig = lwp->lwp_cursig; ext = lwp->lwp_extsig; ASSERT(sig < NSIG); /* * Re-check lwp_cursig after we acquire p_lock. Since p_lock was * dropped between issig() and psig(), a debugger may have cleared * lwp_cursig via /proc in the intervening window. */ if (sig == 0) { if (lwp->lwp_curinfo) { siginfofree(lwp->lwp_curinfo); lwp->lwp_curinfo = NULL; } if (t->t_flag & T_TOMASK) { /* sigsuspend or pollsys */ t->t_flag &= ~T_TOMASK; t->t_hold = lwp->lwp_sigoldmask; } mutex_exit(&p->p_lock); return; } func = PTOU(curproc)->u_signal[sig-1]; /* * The signal disposition could have changed since we promoted * this signal from pending to current (we dropped p->p_lock). * This can happen only in a multi-threaded process. */ if (sigismember(&p->p_ignore, sig) || (func == SIG_DFL && sigismember(&stopdefault, sig))) { lwp->lwp_cursig = 0; lwp->lwp_extsig = 0; if (lwp->lwp_curinfo) { siginfofree(lwp->lwp_curinfo); lwp->lwp_curinfo = NULL; } if (t->t_flag & T_TOMASK) { /* sigsuspend or pollsys */ t->t_flag &= ~T_TOMASK; t->t_hold = lwp->lwp_sigoldmask; } mutex_exit(&p->p_lock); return; } /* * We check lwp_curinfo first since pr_setsig can actually * stuff a sigqueue_t there for SIGKILL. */ if (lwp->lwp_curinfo) { sqp = lwp->lwp_curinfo; } else if (sig == SIGKILL && p->p_killsqp) { sqp = p->p_killsqp; } if (sqp != NULL) { if (SI_FROMUSER(&sqp->sq_info)) { pid = sqp->sq_info.si_pid; ctid = sqp->sq_info.si_ctid; zoneid = sqp->sq_info.si_zoneid; } /* * If we have a sigqueue_t, its sq_external value * trumps the lwp_extsig value. It is theoretically * possible to make lwp_extsig reflect reality, but it * would unnecessarily complicate things elsewhere. */ ext = sqp->sq_external; } if (func == SIG_DFL) { mutex_exit(&p->p_lock); DTRACE_PROC3(signal__handle, int, sig, k_siginfo_t *, NULL, void (*)(void), func); } else { k_siginfo_t *sip = NULL; /* * If DTrace user-land tracing is active, give DTrace a * chance to defer the signal until after tracing is * complete. */ if (t->t_dtrace_on && dtrace_safe_defer_signal()) { mutex_exit(&p->p_lock); return; } /* * save siginfo pointer here, in case the * the signal's reset bit is on * * The presence of a current signal prevents paging * from succeeding over a network. We copy the current * signal information to the side and cancel the current * signal so that sendsig() will succeed. */ if (sigismember(&p->p_siginfo, sig)) { sip = &lwp->lwp_siginfo; if (sqp) { bcopy(&sqp->sq_info, sip, sizeof (*sip)); /* * If we were interrupted out of a system call * due to pthread_cancel(), inform libc. */ if (sig == SIGCANCEL && sip->si_code == SI_LWP && t->t_sysnum != 0) schedctl_cancel_eintr(); } else if (sig == SIGPROF && sip->si_signo == SIGPROF && t->t_rprof != NULL && t->t_rprof->rp_anystate) { /* EMPTY */; } else { bzero(sip, sizeof (*sip)); sip->si_signo = sig; sip->si_code = SI_NOINFO; } } if (t->t_flag & T_TOMASK) t->t_flag &= ~T_TOMASK; else lwp->lwp_sigoldmask = t->t_hold; sigorset(&t->t_hold, &PTOU(curproc)->u_sigmask[sig-1]); if (!sigismember(&PTOU(curproc)->u_signodefer, sig)) sigaddset(&t->t_hold, sig); if (sigismember(&PTOU(curproc)->u_sigresethand, sig)) setsigact(sig, SIG_DFL, nullsmask, 0); DTRACE_PROC3(signal__handle, int, sig, k_siginfo_t *, sip, void (*)(void), func); lwp->lwp_cursig = 0; lwp->lwp_extsig = 0; if (lwp->lwp_curinfo) { /* p->p_killsqp is freed by freeproc */ siginfofree(lwp->lwp_curinfo); lwp->lwp_curinfo = NULL; } mutex_exit(&p->p_lock); lwp->lwp_ru.nsignals++; if (p->p_model == DATAMODEL_NATIVE) rc = sendsig(sig, sip, func); #ifdef _SYSCALL32_IMPL else rc = sendsig32(sig, sip, func); #endif /* _SYSCALL32_IMPL */ if (rc) return; sig = lwp->lwp_cursig = SIGSEGV; ext = 0; /* lwp_extsig was set above */ pid = -1; ctid = 0; } if (sigismember(&coredefault, sig)) { /* * Terminate all LWPs but don't discard them. * If another lwp beat us to the punch by calling exit(), * evaporate now. */ proc_is_exiting(p); if (exitlwps(1) != 0) { mutex_enter(&p->p_lock); lwp_exit(); } /* if we got a SIGKILL from anywhere, no core dump */ if (p->p_flag & SKILLED) { sig = SIGKILL; ext = (p->p_flag & SEXTKILLED) != 0; } else { if (audit_active) /* audit core dump */ audit_core_start(sig); if (core(sig, ext) == 0) code = CLD_DUMPED; if (audit_active) /* audit core dump */ audit_core_finish(code); } } /* * Generate a contract event once if the process is killed * by a signal. */ if (ext) { proc_is_exiting(p); if (exitlwps(0) != 0) { mutex_enter(&p->p_lock); lwp_exit(); } contract_process_sig(p->p_ct_process, p, sig, pid, ctid, zoneid); } exit(code, sig); } /* * Find next unheld signal in ssp for thread t. */ int fsig(k_sigset_t *ssp, kthread_t *t) { proc_t *p = ttoproc(t); user_t *up = PTOU(p); int i; k_sigset_t temp; ASSERT(MUTEX_HELD(&p->p_lock)); /* * Don't promote any signals for the parent of a vfork()d * child that hasn't yet released the parent's memory. */ if (p->p_flag & SVFWAIT) return (0); temp = *ssp; sigdiffset(&temp, &t->t_hold); /* * Don't promote stopping signals (except SIGSTOP) for a child * of vfork() that hasn't yet released the parent's memory. */ if (p->p_flag & SVFORK) sigdiffset(&temp, &holdvfork); /* * Don't promote a signal that will stop * the process when lwp_nostop is set. */ if (ttolwp(t)->lwp_nostop) { sigdelset(&temp, SIGSTOP); if (!p->p_pgidp->pid_pgorphaned) { if (up->u_signal[SIGTSTP-1] == SIG_DFL) sigdelset(&temp, SIGTSTP); if (up->u_signal[SIGTTIN-1] == SIG_DFL) sigdelset(&temp, SIGTTIN); if (up->u_signal[SIGTTOU-1] == SIG_DFL) sigdelset(&temp, SIGTTOU); } } /* * Choose SIGKILL and SIGPROF before all other pending signals. * The rest are promoted in signal number order. */ if (sigismember(&temp, SIGKILL)) return (SIGKILL); if (sigismember(&temp, SIGPROF)) return (SIGPROF); for (i = 0; i < sizeof (temp) / sizeof (temp.__sigbits[0]); i++) { if (temp.__sigbits[i]) return ((i * NBBY * sizeof (temp.__sigbits[0])) + lowbit(temp.__sigbits[i])); } return (0); } void setsigact(int sig, void (*disp)(), k_sigset_t mask, int flags) { proc_t *p = ttoproc(curthread); kthread_t *t; ASSERT(MUTEX_HELD(&p->p_lock)); PTOU(curproc)->u_signal[sig - 1] = disp; /* * Honor the SA_SIGINFO flag if the signal is being caught. * Force the SA_SIGINFO flag if the signal is not being caught. * This is necessary to make sigqueue() and sigwaitinfo() work * properly together when the signal is set to default or is * being temporarily ignored. */ if ((flags & SA_SIGINFO) || disp == SIG_DFL || disp == SIG_IGN) sigaddset(&p->p_siginfo, sig); else sigdelset(&p->p_siginfo, sig); if (disp != SIG_DFL && disp != SIG_IGN) { sigdelset(&p->p_ignore, sig); PTOU(curproc)->u_sigmask[sig - 1] = mask; if (!sigismember(&cantreset, sig)) { if (flags & SA_RESETHAND) sigaddset(&PTOU(curproc)->u_sigresethand, sig); else sigdelset(&PTOU(curproc)->u_sigresethand, sig); } if (flags & SA_NODEFER) sigaddset(&PTOU(curproc)->u_signodefer, sig); else sigdelset(&PTOU(curproc)->u_signodefer, sig); if (flags & SA_RESTART) sigaddset(&PTOU(curproc)->u_sigrestart, sig); else sigdelset(&PTOU(curproc)->u_sigrestart, sig); if (flags & SA_ONSTACK) sigaddset(&PTOU(curproc)->u_sigonstack, sig); else sigdelset(&PTOU(curproc)->u_sigonstack, sig); } else if (disp == SIG_IGN || (disp == SIG_DFL && sigismember(&ignoredefault, sig))) { /* * Setting the signal action to SIG_IGN results in the * discarding of all pending signals of that signal number. * Setting the signal action to SIG_DFL does the same *only* * if the signal's default behavior is to be ignored. */ sigaddset(&p->p_ignore, sig); sigdelset(&p->p_sig, sig); sigdelset(&p->p_extsig, sig); sigdelq(p, NULL, sig); t = p->p_tlist; do { sigdelset(&t->t_sig, sig); sigdelset(&t->t_extsig, sig); sigdelq(p, t, sig); } while ((t = t->t_forw) != p->p_tlist); } else { /* * The signal action is being set to SIG_DFL and the default * behavior is to do something: make sure it is not ignored. */ sigdelset(&p->p_ignore, sig); } if (sig == SIGCLD) { if (flags & SA_NOCLDWAIT) p->p_flag |= SNOWAIT; else p->p_flag &= ~SNOWAIT; if (flags & SA_NOCLDSTOP) p->p_flag &= ~SJCTL; else p->p_flag |= SJCTL; if ((p->p_flag & SNOWAIT) || disp == SIG_IGN) { proc_t *cp, *tp; mutex_exit(&p->p_lock); mutex_enter(&pidlock); for (cp = p->p_child; cp != NULL; cp = tp) { tp = cp->p_sibling; if (cp->p_stat == SZOMB && !(cp->p_pidflag & CLDWAITPID)) freeproc(cp); } mutex_exit(&pidlock); mutex_enter(&p->p_lock); } } } /* * Set all signal actions not already set to SIG_DFL or SIG_IGN to SIG_DFL. * Called from exec_common() for a process undergoing execve() * and from cfork() for a newly-created child of vfork(). * In the vfork() case, 'p' is not the current process. * In both cases, there is only one thread in the process. */ void sigdefault(proc_t *p) { kthread_t *t = p->p_tlist; struct user *up = PTOU(p); int sig; ASSERT(MUTEX_HELD(&p->p_lock)); for (sig = 1; sig < NSIG; sig++) { if (up->u_signal[sig - 1] != SIG_DFL && up->u_signal[sig - 1] != SIG_IGN) { up->u_signal[sig - 1] = SIG_DFL; sigemptyset(&up->u_sigmask[sig - 1]); if (sigismember(&ignoredefault, sig)) { sigdelq(p, NULL, sig); sigdelq(p, t, sig); } if (sig == SIGCLD) p->p_flag &= ~(SNOWAIT|SJCTL); } } sigorset(&p->p_ignore, &ignoredefault); sigfillset(&p->p_siginfo); sigdiffset(&p->p_siginfo, &cantmask); sigdiffset(&p->p_sig, &ignoredefault); sigdiffset(&p->p_extsig, &ignoredefault); sigdiffset(&t->t_sig, &ignoredefault); sigdiffset(&t->t_extsig, &ignoredefault); } void sigcld(proc_t *cp, sigqueue_t *sqp) { proc_t *pp = cp->p_parent; ASSERT(MUTEX_HELD(&pidlock)); switch (cp->p_wcode) { case CLD_EXITED: case CLD_DUMPED: case CLD_KILLED: ASSERT(cp->p_stat == SZOMB); /* * The broadcast on p_srwchan_cv is a kludge to * wakeup a possible thread in uadmin(A_SHUTDOWN). */ cv_broadcast(&cp->p_srwchan_cv); /* * Add to newstate list of the parent */ add_ns(pp, cp); cv_broadcast(&pp->p_cv); if ((pp->p_flag & SNOWAIT) || PTOU(pp)->u_signal[SIGCLD - 1] == SIG_IGN) { if (!(cp->p_pidflag & CLDWAITPID)) freeproc(cp); } else if (!(cp->p_pidflag & CLDNOSIGCHLD)) { post_sigcld(cp, sqp); sqp = NULL; } break; case CLD_STOPPED: case CLD_CONTINUED: cv_broadcast(&pp->p_cv); if (pp->p_flag & SJCTL) { post_sigcld(cp, sqp); sqp = NULL; } break; } if (sqp) siginfofree(sqp); } /* * Common code called from sigcld() and from * waitid() and issig_forreal() via sigcld_repost(). * Give the parent process a SIGCLD if it does not have one pending, * else mark the child process so a SIGCLD can be posted later. */ static void post_sigcld(proc_t *cp, sigqueue_t *sqp) { proc_t *pp = cp->p_parent; k_siginfo_t info; ASSERT(MUTEX_HELD(&pidlock)); mutex_enter(&pp->p_lock); /* * If a SIGCLD is pending, then just mark the child process * so that its SIGCLD will be posted later, when the first * SIGCLD is taken off the queue or when the parent is ready * to receive it or accept it, if ever. */ if (sigismember(&pp->p_sig, SIGCLD)) { cp->p_pidflag |= CLDPEND; } else { cp->p_pidflag &= ~CLDPEND; if (sqp == NULL) { /* * This can only happen when the parent is init. * (See call to sigcld(q, NULL) in exit().) * Use KM_NOSLEEP to avoid deadlock. */ ASSERT(pp == proc_init); winfo(cp, &info, 0); sigaddq(pp, NULL, &info, KM_NOSLEEP); } else { winfo(cp, &sqp->sq_info, 0); sigaddqa(pp, NULL, sqp); sqp = NULL; } } mutex_exit(&pp->p_lock); if (sqp) siginfofree(sqp); } /* * Search for a child that has a pending SIGCLD for us, the parent. * The queue of SIGCLD signals is implied by the list of children. * We post the SIGCLD signals one at a time so they don't get lost. * When one is dequeued, another is enqueued, until there are no more. */ void sigcld_repost() { proc_t *pp = curproc; proc_t *cp; sigqueue_t *sqp; sqp = kmem_zalloc(sizeof (sigqueue_t), KM_SLEEP); mutex_enter(&pidlock); for (cp = pp->p_child; cp; cp = cp->p_sibling) { if (cp->p_pidflag & CLDPEND) { post_sigcld(cp, sqp); mutex_exit(&pidlock); return; } } mutex_exit(&pidlock); kmem_free(sqp, sizeof (sigqueue_t)); } /* * count number of sigqueue send by sigaddqa() */ void sigqsend(int cmd, proc_t *p, kthread_t *t, sigqueue_t *sigqp) { sigqhdr_t *sqh; sqh = (sigqhdr_t *)sigqp->sq_backptr; ASSERT(sqh); mutex_enter(&sqh->sqb_lock); sqh->sqb_sent++; mutex_exit(&sqh->sqb_lock); if (cmd == SN_SEND) sigaddqa(p, t, sigqp); else siginfofree(sigqp); } int sigsendproc(proc_t *p, sigsend_t *pv) { struct cred *cr; proc_t *myprocp = curproc; ASSERT(MUTEX_HELD(&pidlock)); if (p->p_pid == 1 && pv->sig && sigismember(&cantmask, pv->sig)) return (EPERM); cr = CRED(); if (pv->checkperm == 0 || (pv->sig == SIGCONT && p->p_sessp == myprocp->p_sessp) || prochasprocperm(p, myprocp, cr)) { pv->perm++; if (pv->sig) { /* Make sure we should be setting si_pid and friends */ ASSERT(pv->sicode <= 0); if (SI_CANQUEUE(pv->sicode)) { sigqueue_t *sqp; mutex_enter(&myprocp->p_lock); sqp = sigqalloc(myprocp->p_sigqhdr); mutex_exit(&myprocp->p_lock); if (sqp == NULL) return (EAGAIN); sqp->sq_info.si_signo = pv->sig; sqp->sq_info.si_code = pv->sicode; sqp->sq_info.si_pid = myprocp->p_pid; sqp->sq_info.si_ctid = PRCTID(myprocp); sqp->sq_info.si_zoneid = getzoneid(); sqp->sq_info.si_uid = crgetruid(cr); sqp->sq_info.si_value = pv->value; mutex_enter(&p->p_lock); sigqsend(SN_SEND, p, NULL, sqp); mutex_exit(&p->p_lock); } else { k_siginfo_t info; bzero(&info, sizeof (info)); info.si_signo = pv->sig; info.si_code = pv->sicode; info.si_pid = myprocp->p_pid; info.si_ctid = PRCTID(myprocp); info.si_zoneid = getzoneid(); info.si_uid = crgetruid(cr); mutex_enter(&p->p_lock); /* * XXX: Should be KM_SLEEP but * we have to avoid deadlock. */ sigaddq(p, NULL, &info, KM_NOSLEEP); mutex_exit(&p->p_lock); } } } return (0); } int sigsendset(procset_t *psp, sigsend_t *pv) { int error; error = dotoprocs(psp, sigsendproc, (char *)pv); if (error == 0 && pv->perm == 0) return (EPERM); return (error); } /* * Dequeue a queued siginfo structure. * If a non-null thread pointer is passed then dequeue from * the thread queue, otherwise dequeue from the process queue. */ void sigdeq(proc_t *p, kthread_t *t, int sig, sigqueue_t **qpp) { sigqueue_t **psqp, *sqp; ASSERT(MUTEX_HELD(&p->p_lock)); *qpp = NULL; if (t != NULL) { sigdelset(&t->t_sig, sig); sigdelset(&t->t_extsig, sig); psqp = &t->t_sigqueue; } else { sigdelset(&p->p_sig, sig); sigdelset(&p->p_extsig, sig); psqp = &p->p_sigqueue; } for (;;) { if ((sqp = *psqp) == NULL) return; if (sqp->sq_info.si_signo == sig) break; else psqp = &sqp->sq_next; } *qpp = sqp; *psqp = sqp->sq_next; for (sqp = *psqp; sqp; sqp = sqp->sq_next) { if (sqp->sq_info.si_signo == sig) { if (t != (kthread_t *)NULL) { sigaddset(&t->t_sig, sig); t->t_sig_check = 1; } else { sigaddset(&p->p_sig, sig); set_proc_ast(p); } break; } } } /* * Delete a queued SIGCLD siginfo structure matching the k_siginfo_t argument. */ void sigcld_delete(k_siginfo_t *ip) { proc_t *p = curproc; int another_sigcld = 0; sigqueue_t **psqp, *sqp; ASSERT(ip->si_signo == SIGCLD); mutex_enter(&p->p_lock); if (!sigismember(&p->p_sig, SIGCLD)) { mutex_exit(&p->p_lock); return; } psqp = &p->p_sigqueue; for (;;) { if ((sqp = *psqp) == NULL) { mutex_exit(&p->p_lock); return; } if (sqp->sq_info.si_signo == SIGCLD) { if (sqp->sq_info.si_pid == ip->si_pid && sqp->sq_info.si_code == ip->si_code && sqp->sq_info.si_status == ip->si_status) break; another_sigcld = 1; } psqp = &sqp->sq_next; } *psqp = sqp->sq_next; siginfofree(sqp); for (sqp = *psqp; !another_sigcld && sqp; sqp = sqp->sq_next) { if (sqp->sq_info.si_signo == SIGCLD) another_sigcld = 1; } if (!another_sigcld) { sigdelset(&p->p_sig, SIGCLD); sigdelset(&p->p_extsig, SIGCLD); } mutex_exit(&p->p_lock); } /* * Delete queued siginfo structures. * If a non-null thread pointer is passed then delete from * the thread queue, otherwise delete from the process queue. */ void sigdelq(proc_t *p, kthread_t *t, int sig) { sigqueue_t **psqp, *sqp; /* * We must be holding p->p_lock unless the process is * being reaped or has failed to get started on fork. */ ASSERT(MUTEX_HELD(&p->p_lock) || p->p_stat == SIDL || p->p_stat == SZOMB); if (t != (kthread_t *)NULL) psqp = &t->t_sigqueue; else psqp = &p->p_sigqueue; while (*psqp) { sqp = *psqp; if (sig == 0 || sqp->sq_info.si_signo == sig) { *psqp = sqp->sq_next; siginfofree(sqp); } else psqp = &sqp->sq_next; } } /* * Insert a siginfo structure into a queue. * If a non-null thread pointer is passed then add to the thread queue, * otherwise add to the process queue. * * The function sigaddqins() is called with sigqueue already allocated. * It is called from sigaddqa() and sigaddq() below. * * The value of si_code implicitly indicates whether sigp is to be * explicitly queued, or to be queued to depth one. */ static void sigaddqins(proc_t *p, kthread_t *t, sigqueue_t *sigqp) { sigqueue_t **psqp; int sig = sigqp->sq_info.si_signo; sigqp->sq_external = (curproc != &p0) && (curproc->p_ct_process != p->p_ct_process); /* * issig_forreal() doesn't bother dequeueing signals if SKILLED * is set, and even if it did, we would want to avoid situation * (which would be unique to SIGKILL) where one thread dequeued * the sigqueue_t and another executed psig(). So we create a * separate stash for SIGKILL's sigqueue_t. Because a second * SIGKILL can set SEXTKILLED, we overwrite the existing entry * if (and only if) it was non-extracontractual. */ if (sig == SIGKILL) { if (p->p_killsqp == NULL || !p->p_killsqp->sq_external) { if (p->p_killsqp != NULL) siginfofree(p->p_killsqp); p->p_killsqp = sigqp; sigqp->sq_next = NULL; } else { siginfofree(sigqp); } return; } ASSERT(sig >= 1 && sig < NSIG); if (t != NULL) /* directed to a thread */ psqp = &t->t_sigqueue; else /* directed to a process */ psqp = &p->p_sigqueue; if (SI_CANQUEUE(sigqp->sq_info.si_code) && sigismember(&p->p_siginfo, sig)) { for (; *psqp != NULL; psqp = &(*psqp)->sq_next) ; } else { for (; *psqp != NULL; psqp = &(*psqp)->sq_next) { if ((*psqp)->sq_info.si_signo == sig) { siginfofree(sigqp); return; } } } *psqp = sigqp; sigqp->sq_next = NULL; } /* * The function sigaddqa() is called with sigqueue already allocated. * If signal is ignored, discard but guarantee KILL and generation semantics. * It is called from sigqueue() and other places. */ void sigaddqa(proc_t *p, kthread_t *t, sigqueue_t *sigqp) { int sig = sigqp->sq_info.si_signo; ASSERT(MUTEX_HELD(&p->p_lock)); ASSERT(sig >= 1 && sig < NSIG); if (sig_discardable(p, sig)) siginfofree(sigqp); else sigaddqins(p, t, sigqp); sigtoproc(p, t, sig); } /* * Allocate the sigqueue_t structure and call sigaddqins(). */ void sigaddq(proc_t *p, kthread_t *t, k_siginfo_t *infop, int km_flags) { sigqueue_t *sqp; int sig = infop->si_signo; ASSERT(MUTEX_HELD(&p->p_lock)); ASSERT(sig >= 1 && sig < NSIG); /* * If the signal will be discarded by sigtoproc() or * if the process isn't requesting siginfo and it isn't * blocking the signal (it *could* change it's mind while * the signal is pending) then don't bother creating one. */ if (!sig_discardable(p, sig) && (sigismember(&p->p_siginfo, sig) || (curproc->p_ct_process != p->p_ct_process) || (sig == SIGCLD && SI_FROMKERNEL(infop))) && ((sqp = kmem_alloc(sizeof (sigqueue_t), km_flags)) != NULL)) { bcopy(infop, &sqp->sq_info, sizeof (k_siginfo_t)); sqp->sq_func = NULL; sqp->sq_next = NULL; sigaddqins(p, t, sqp); } sigtoproc(p, t, sig); } /* * Handle stop-on-fault processing for the debugger. Returns 0 * if the fault is cleared during the stop, nonzero if it isn't. */ int stop_on_fault(uint_t fault, k_siginfo_t *sip) { proc_t *p = ttoproc(curthread); klwp_t *lwp = ttolwp(curthread); ASSERT(prismember(&p->p_fltmask, fault)); /* * Record current fault and siginfo structure so debugger can * find it. */ mutex_enter(&p->p_lock); lwp->lwp_curflt = (uchar_t)fault; lwp->lwp_siginfo = *sip; stop(PR_FAULTED, fault); fault = lwp->lwp_curflt; lwp->lwp_curflt = 0; mutex_exit(&p->p_lock); return (fault); } void sigorset(k_sigset_t *s1, k_sigset_t *s2) { s1->__sigbits[0] |= s2->__sigbits[0]; s1->__sigbits[1] |= s2->__sigbits[1]; } void sigandset(k_sigset_t *s1, k_sigset_t *s2) { s1->__sigbits[0] &= s2->__sigbits[0]; s1->__sigbits[1] &= s2->__sigbits[1]; } void sigdiffset(k_sigset_t *s1, k_sigset_t *s2) { s1->__sigbits[0] &= ~(s2->__sigbits[0]); s1->__sigbits[1] &= ~(s2->__sigbits[1]); } /* * Return non-zero if curthread->t_sig_check should be set to 1, that is, * if there are any signals the thread might take on return from the kernel. * If ksigset_t's were a single word, we would do: * return (((p->p_sig | t->t_sig) & ~t->t_hold) & fillset); */ int sigcheck(proc_t *p, kthread_t *t) { sc_shared_t *tdp = t->t_schedctl; /* * If signals are blocked via the schedctl interface * then we only check for the unmaskable signals. */ if (tdp != NULL && tdp->sc_sigblock) return ((p->p_sig.__sigbits[0] | t->t_sig.__sigbits[0]) & CANTMASK0); return (((p->p_sig.__sigbits[0] | t->t_sig.__sigbits[0]) & ~t->t_hold.__sigbits[0]) | (((p->p_sig.__sigbits[1] | t->t_sig.__sigbits[1]) & ~t->t_hold.__sigbits[1]) & FILLSET1)); } /* ONC_PLUS EXTRACT START */ void sigintr(k_sigset_t *smask, int intable) { proc_t *p; int owned; k_sigset_t lmask; /* local copy of cantmask */ klwp_t *lwp = ttolwp(curthread); /* * Mask out all signals except SIGHUP, SIGINT, SIGQUIT * and SIGTERM. (Preserving the existing masks). * This function supports the -intr nfs and ufs mount option. */ /* * don't do kernel threads */ if (lwp == NULL) return; /* * get access to signal mask */ p = ttoproc(curthread); owned = mutex_owned(&p->p_lock); /* this is filthy */ if (!owned) mutex_enter(&p->p_lock); /* * remember the current mask */ schedctl_finish_sigblock(curthread); *smask = curthread->t_hold; /* * mask out all signals */ sigfillset(&curthread->t_hold); /* * Unmask the non-maskable signals (e.g., KILL), as long as * they aren't already masked (which could happen at exit). * The first sigdiffset sets lmask to (cantmask & ~curhold). The * second sets the current hold mask to (~0 & ~lmask), which reduces * to (~cantmask | curhold). */ lmask = cantmask; sigdiffset(&lmask, smask); sigdiffset(&curthread->t_hold, &lmask); /* * Re-enable HUP, QUIT, and TERM iff they were originally enabled * Re-enable INT if it's originally enabled and the NFS mount option * nointr is not set. */ if (!sigismember(smask, SIGHUP)) sigdelset(&curthread->t_hold, SIGHUP); if (!sigismember(smask, SIGINT) && intable) sigdelset(&curthread->t_hold, SIGINT); if (!sigismember(smask, SIGQUIT)) sigdelset(&curthread->t_hold, SIGQUIT); if (!sigismember(smask, SIGTERM)) sigdelset(&curthread->t_hold, SIGTERM); /* * release access to signal mask */ if (!owned) mutex_exit(&p->p_lock); /* * Indicate that this lwp is not to be stopped. */ lwp->lwp_nostop++; } /* ONC_PLUS EXTRACT END */ void sigunintr(k_sigset_t *smask) { proc_t *p; int owned; klwp_t *lwp = ttolwp(curthread); /* * Reset previous mask (See sigintr() above) */ if (lwp != NULL) { lwp->lwp_nostop--; /* restore lwp stoppability */ p = ttoproc(curthread); owned = mutex_owned(&p->p_lock); /* this is filthy */ if (!owned) mutex_enter(&p->p_lock); curthread->t_hold = *smask; /* so unmasked signals will be seen */ curthread->t_sig_check = 1; if (!owned) mutex_exit(&p->p_lock); } } void sigreplace(k_sigset_t *newmask, k_sigset_t *oldmask) { proc_t *p; int owned; /* * Save current signal mask in oldmask, then * set it to newmask. */ if (ttolwp(curthread) != NULL) { p = ttoproc(curthread); owned = mutex_owned(&p->p_lock); /* this is filthy */ if (!owned) mutex_enter(&p->p_lock); schedctl_finish_sigblock(curthread); if (oldmask != NULL) *oldmask = curthread->t_hold; curthread->t_hold = *newmask; curthread->t_sig_check = 1; if (!owned) mutex_exit(&p->p_lock); } } /* * Return true if the signal number is in range * and the signal code specifies signal queueing. */ int sigwillqueue(int sig, int code) { if (sig >= 0 && sig < NSIG) { switch (code) { case SI_QUEUE: case SI_TIMER: case SI_ASYNCIO: case SI_MESGQ: return (1); } } return (0); } #ifndef UCHAR_MAX #define UCHAR_MAX 255 #endif /* * The entire pool (with maxcount entries) is pre-allocated at * the first sigqueue/signotify call. */ sigqhdr_t * sigqhdralloc(size_t size, uint_t maxcount) { size_t i; sigqueue_t *sq, *next; sigqhdr_t *sqh; i = (maxcount * size) + sizeof (sigqhdr_t); ASSERT(maxcount <= UCHAR_MAX && i <= USHRT_MAX); sqh = kmem_alloc(i, KM_SLEEP); sqh->sqb_count = (uchar_t)maxcount; sqh->sqb_maxcount = (uchar_t)maxcount; sqh->sqb_size = (ushort_t)i; sqh->sqb_pexited = 0; sqh->sqb_sent = 0; sqh->sqb_free = sq = (sigqueue_t *)(sqh + 1); for (i = maxcount - 1; i != 0; i--) { next = (sigqueue_t *)((uintptr_t)sq + size); sq->sq_next = next; sq = next; } sq->sq_next = NULL; cv_init(&sqh->sqb_cv, NULL, CV_DEFAULT, NULL); mutex_init(&sqh->sqb_lock, NULL, MUTEX_DEFAULT, NULL); return (sqh); } static void sigqrel(sigqueue_t *); /* * allocate a sigqueue/signotify structure from the per process * pre-allocated pool. */ sigqueue_t * sigqalloc(sigqhdr_t *sqh) { sigqueue_t *sq = NULL; ASSERT(MUTEX_HELD(&curproc->p_lock)); if (sqh != NULL) { mutex_enter(&sqh->sqb_lock); if (sqh->sqb_count > 0) { sqh->sqb_count--; sq = sqh->sqb_free; sqh->sqb_free = sq->sq_next; mutex_exit(&sqh->sqb_lock); bzero(&sq->sq_info, sizeof (k_siginfo_t)); sq->sq_backptr = sqh; sq->sq_func = sigqrel; sq->sq_next = NULL; sq->sq_external = 0; } else { mutex_exit(&sqh->sqb_lock); } } return (sq); } /* * Return a sigqueue structure back to the pre-allocated pool. */ static void sigqrel(sigqueue_t *sq) { sigqhdr_t *sqh; /* make sure that p_lock of the affected process is held */ sqh = (sigqhdr_t *)sq->sq_backptr; mutex_enter(&sqh->sqb_lock); if (sqh->sqb_pexited && sqh->sqb_sent == 1) { mutex_exit(&sqh->sqb_lock); cv_destroy(&sqh->sqb_cv); mutex_destroy(&sqh->sqb_lock); kmem_free(sqh, sqh->sqb_size); } else { sqh->sqb_count++; sqh->sqb_sent--; sq->sq_next = sqh->sqb_free; sq->sq_backptr = NULL; sqh->sqb_free = sq; cv_signal(&sqh->sqb_cv); mutex_exit(&sqh->sqb_lock); } } /* * Free up the pre-allocated sigqueue headers of sigqueue pool * and signotify pool, if possible. * Called only by the owning process during exec() and exit(). */ void sigqfree(proc_t *p) { ASSERT(MUTEX_HELD(&p->p_lock)); if (p->p_sigqhdr != NULL) { /* sigqueue pool */ sigqhdrfree(p->p_sigqhdr); p->p_sigqhdr = NULL; } if (p->p_signhdr != NULL) { /* signotify pool */ sigqhdrfree(p->p_signhdr); p->p_signhdr = NULL; } } /* * Free up the pre-allocated header and sigq pool if possible. */ void sigqhdrfree(sigqhdr_t *sqh) { mutex_enter(&sqh->sqb_lock); if (sqh->sqb_sent == 0) { mutex_exit(&sqh->sqb_lock); cv_destroy(&sqh->sqb_cv); mutex_destroy(&sqh->sqb_lock); kmem_free(sqh, sqh->sqb_size); } else { sqh->sqb_pexited = 1; mutex_exit(&sqh->sqb_lock); } } /* * Free up a single sigqueue structure. * No other code should free a sigqueue directly. */ void siginfofree(sigqueue_t *sqp) { if (sqp != NULL) { if (sqp->sq_func != NULL) (sqp->sq_func)(sqp); else kmem_free(sqp, sizeof (sigqueue_t)); } } /* * Generate a synchronous signal caused by a hardware * condition encountered by an lwp. Called from trap(). */ void trapsig(k_siginfo_t *ip, int restartable) { proc_t *p = ttoproc(curthread); int sig = ip->si_signo; sigqueue_t *sqp = kmem_zalloc(sizeof (sigqueue_t), KM_SLEEP); ASSERT(sig > 0 && sig < NSIG); if (curthread->t_dtrace_on) dtrace_safe_synchronous_signal(); mutex_enter(&p->p_lock); schedctl_finish_sigblock(curthread); /* * Avoid a possible infinite loop if the lwp is holding the * signal generated by a trap of a restartable instruction or * if the signal so generated is being ignored by the process. */ if (restartable && (sigismember(&curthread->t_hold, sig) || p->p_user.u_signal[sig-1] == SIG_IGN)) { sigdelset(&curthread->t_hold, sig); p->p_user.u_signal[sig-1] = SIG_DFL; sigdelset(&p->p_ignore, sig); } bcopy(ip, &sqp->sq_info, sizeof (k_siginfo_t)); sigaddqa(p, curthread, sqp); mutex_exit(&p->p_lock); } /* * Dispatch the real time profiling signal in the traditional way, * honoring all of the /proc tracing mechanism built into issig(). */ static void realsigprof_slow(int sysnum, int nsysarg, int error) { kthread_t *t = curthread; proc_t *p = ttoproc(t); klwp_t *lwp = ttolwp(t); k_siginfo_t *sip = &lwp->lwp_siginfo; void (*func)(); mutex_enter(&p->p_lock); func = PTOU(p)->u_signal[SIGPROF - 1]; if (p->p_rprof_cyclic == CYCLIC_NONE || func == SIG_DFL || func == SIG_IGN) { bzero(t->t_rprof, sizeof (*t->t_rprof)); mutex_exit(&p->p_lock); return; } if (sigismember(&t->t_hold, SIGPROF)) { mutex_exit(&p->p_lock); return; } sip->si_signo = SIGPROF; sip->si_code = PROF_SIG; sip->si_errno = error; hrt2ts(gethrtime(), &sip->si_tstamp); sip->si_syscall = sysnum; sip->si_nsysarg = nsysarg; sip->si_fault = lwp->lwp_lastfault; sip->si_faddr = lwp->lwp_lastfaddr; lwp->lwp_lastfault = 0; lwp->lwp_lastfaddr = NULL; sigtoproc(p, t, SIGPROF); mutex_exit(&p->p_lock); ASSERT(lwp->lwp_cursig == 0); if (issig(FORREAL)) psig(); sip->si_signo = 0; bzero(t->t_rprof, sizeof (*t->t_rprof)); } /* * We are not tracing the SIGPROF signal, or doing any other unnatural * acts, like watchpoints, so dispatch the real time profiling signal * directly, bypassing all of the overhead built into issig(). */ static void realsigprof_fast(int sysnum, int nsysarg, int error) { kthread_t *t = curthread; proc_t *p = ttoproc(t); klwp_t *lwp = ttolwp(t); k_siginfo_t *sip = &lwp->lwp_siginfo; void (*func)(); int rc; int code; /* * We don't need to acquire p->p_lock here; * we are manipulating thread-private data. */ func = PTOU(p)->u_signal[SIGPROF - 1]; if (p->p_rprof_cyclic == CYCLIC_NONE || func == SIG_DFL || func == SIG_IGN) { bzero(t->t_rprof, sizeof (*t->t_rprof)); return; } if (lwp->lwp_cursig != 0 || lwp->lwp_curinfo != NULL || sigismember(&t->t_hold, SIGPROF)) { return; } sip->si_signo = SIGPROF; sip->si_code = PROF_SIG; sip->si_errno = error; hrt2ts(gethrtime(), &sip->si_tstamp); sip->si_syscall = sysnum; sip->si_nsysarg = nsysarg; sip->si_fault = lwp->lwp_lastfault; sip->si_faddr = lwp->lwp_lastfaddr; lwp->lwp_lastfault = 0; lwp->lwp_lastfaddr = NULL; if (t->t_flag & T_TOMASK) t->t_flag &= ~T_TOMASK; else lwp->lwp_sigoldmask = t->t_hold; sigorset(&t->t_hold, &PTOU(p)->u_sigmask[SIGPROF - 1]); if (!sigismember(&PTOU(p)->u_signodefer, SIGPROF)) sigaddset(&t->t_hold, SIGPROF); lwp->lwp_extsig = 0; lwp->lwp_ru.nsignals++; if (p->p_model == DATAMODEL_NATIVE) rc = sendsig(SIGPROF, sip, func); #ifdef _SYSCALL32_IMPL else rc = sendsig32(SIGPROF, sip, func); #endif /* _SYSCALL32_IMPL */ sip->si_signo = 0; bzero(t->t_rprof, sizeof (*t->t_rprof)); if (rc == 0) { /* * sendsig() failed; we must dump core with a SIGSEGV. * See psig(). This code is copied from there. */ lwp->lwp_cursig = SIGSEGV; code = CLD_KILLED; proc_is_exiting(p); if (exitlwps(1) != 0) { mutex_enter(&p->p_lock); lwp_exit(); } if (audit_active) audit_core_start(SIGSEGV); if (core(SIGSEGV, 0) == 0) code = CLD_DUMPED; if (audit_active) audit_core_finish(code); exit(code, SIGSEGV); } } /* * Arrange for the real time profiling signal to be dispatched. */ void realsigprof(int sysnum, int nsysarg, int error) { kthread_t *t = curthread; proc_t *p = ttoproc(t); if (t->t_rprof->rp_anystate == 0) return; schedctl_finish_sigblock(t); /* test for any activity that requires p->p_lock */ if (tracing(p, SIGPROF) || pr_watch_active(p) || sigismember(&PTOU(p)->u_sigresethand, SIGPROF)) { /* do it the classic slow way */ realsigprof_slow(sysnum, nsysarg, error); } else { /* do it the cheating-a-little fast way */ realsigprof_fast(sysnum, nsysarg, error); } } #ifdef _SYSCALL32_IMPL /* * It's tricky to transmit a sigval between 32-bit and 64-bit * process, since in the 64-bit world, a pointer and an integer * are different sizes. Since we're constrained by the standards * world not to change the types, and it's unclear how useful it is * to send pointers between address spaces this way, we preserve * the 'int' interpretation for 32-bit processes interoperating * with 64-bit processes. The full semantics (pointers or integers) * are available for N-bit processes interoperating with N-bit * processes. */ void siginfo_kto32(const k_siginfo_t *src, siginfo32_t *dest) { bzero(dest, sizeof (*dest)); /* * The absolute minimum content is si_signo and si_code. */ dest->si_signo = src->si_signo; if ((dest->si_code = src->si_code) == SI_NOINFO) return; /* * A siginfo generated by user level is structured * differently from one generated by the kernel. */ if (SI_FROMUSER(src)) { dest->si_pid = src->si_pid; dest->si_ctid = src->si_ctid; dest->si_zoneid = src->si_zoneid; dest->si_uid = src->si_uid; if (SI_CANQUEUE(src->si_code)) dest->si_value.sival_int = (int32_t)src->si_value.sival_int; return; } dest->si_errno = src->si_errno; switch (src->si_signo) { default: dest->si_pid = src->si_pid; dest->si_ctid = src->si_ctid; dest->si_zoneid = src->si_zoneid; dest->si_uid = src->si_uid; dest->si_value.sival_int = (int32_t)src->si_value.sival_int; break; case SIGCLD: dest->si_pid = src->si_pid; dest->si_ctid = src->si_ctid; dest->si_zoneid = src->si_zoneid; dest->si_status = src->si_status; dest->si_stime = src->si_stime; dest->si_utime = src->si_utime; break; case SIGSEGV: case SIGBUS: case SIGILL: case SIGTRAP: case SIGFPE: case SIGEMT: dest->si_addr = (caddr32_t)(uintptr_t)src->si_addr; dest->si_trapno = src->si_trapno; dest->si_pc = (caddr32_t)(uintptr_t)src->si_pc; break; case SIGPOLL: case SIGXFSZ: dest->si_fd = src->si_fd; dest->si_band = src->si_band; break; case SIGPROF: dest->si_faddr = (caddr32_t)(uintptr_t)src->si_faddr; dest->si_tstamp.tv_sec = src->si_tstamp.tv_sec; dest->si_tstamp.tv_nsec = src->si_tstamp.tv_nsec; dest->si_syscall = src->si_syscall; dest->si_nsysarg = src->si_nsysarg; dest->si_fault = src->si_fault; break; } } void siginfo_32tok(const siginfo32_t *src, k_siginfo_t *dest) { bzero(dest, sizeof (*dest)); /* * The absolute minimum content is si_signo and si_code. */ dest->si_signo = src->si_signo; if ((dest->si_code = src->si_code) == SI_NOINFO) return; /* * A siginfo generated by user level is structured * differently from one generated by the kernel. */ if (SI_FROMUSER(src)) { dest->si_pid = src->si_pid; dest->si_ctid = src->si_ctid; dest->si_zoneid = src->si_zoneid; dest->si_uid = src->si_uid; if (SI_CANQUEUE(src->si_code)) dest->si_value.sival_int = (int)src->si_value.sival_int; return; } dest->si_errno = src->si_errno; switch (src->si_signo) { default: dest->si_pid = src->si_pid; dest->si_ctid = src->si_ctid; dest->si_zoneid = src->si_zoneid; dest->si_uid = src->si_uid; dest->si_value.sival_int = (int)src->si_value.sival_int; break; case SIGCLD: dest->si_pid = src->si_pid; dest->si_ctid = src->si_ctid; dest->si_zoneid = src->si_zoneid; dest->si_status = src->si_status; dest->si_stime = src->si_stime; dest->si_utime = src->si_utime; break; case SIGSEGV: case SIGBUS: case SIGILL: case SIGTRAP: case SIGFPE: case SIGEMT: dest->si_addr = (void *)(uintptr_t)src->si_addr; dest->si_trapno = src->si_trapno; dest->si_pc = (void *)(uintptr_t)src->si_pc; break; case SIGPOLL: case SIGXFSZ: dest->si_fd = src->si_fd; dest->si_band = src->si_band; break; case SIGPROF: dest->si_faddr = (void *)(uintptr_t)src->si_faddr; dest->si_tstamp.tv_sec = src->si_tstamp.tv_sec; dest->si_tstamp.tv_nsec = src->si_tstamp.tv_nsec; dest->si_syscall = src->si_syscall; dest->si_nsysarg = src->si_nsysarg; dest->si_fault = src->si_fault; break; } } #endif /* _SYSCALL32_IMPL */