/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * There are two possible layers of privilege routines and two possible * levels of secpolicy. Plus one other we may not be interested in, so * we may need as many as 6 but no more. */ #define MAXPRIVSTACK 6 int priv_debug = 0; /* * This file contains the majority of the policy routines. * Since the policy routines are defined by function and not * by privilege, there is quite a bit of duplication of * functions. * * The secpolicy functions must not make asssumptions about * locks held or not held as any lock can be held while they're * being called. * * Credentials are read-only so no special precautions need to * be taken while locking them. * * When a new policy check needs to be added to the system the * following procedure should be followed: * * Pick an appropriate secpolicy_*() function * -> done if one exists. * Create a new secpolicy function, preferably with * a descriptive name using the standard template. * Pick an appropriate privilege for the policy. * If no appropraite privilege exists, define new one * (this should be done with extreme care; in most cases * little is gained by adding another privilege) * * WHY ROOT IS STILL SPECIAL. * * In a number of the policy functions, there are still explicit * checks for uid 0. The rationale behind these is that many root * owned files/objects hold configuration information which can give full * privileges to the user once written to. To prevent escalation * of privilege by allowing just a single privilege to modify root owned * objects, we've added these root specific checks where we considered * them necessary: modifying root owned files, changing uids to 0, etc. * * PRIVILEGE ESCALATION AND ZONES. * * A number of operations potentially allow the caller to achieve * privileges beyond the ones normally required to perform the operation. * For example, if allowed to create a setuid 0 executable, a process can * gain privileges beyond PRIV_FILE_SETID. Zones, however, place * restrictions on the ability to gain privileges beyond those available * within the zone through file and process manipulation. Hence, such * operations require that the caller have an effective set that includes * all privileges available within the current zone, or all privileges * if executing in the global zone. * * This is indicated in the priv_policy* policy checking functions * through a combination of parameters. The "priv" parameter indicates * the privilege that is required, and the "allzone" parameter indicates * whether or not all privileges in the zone are required. In addition, * priv can be set to PRIV_ALL to indicate that all privileges are * required (regardless of zone). There are three scenarios of interest: * (1) operation requires a specific privilege * (2) operation requires a specific privilege, and requires all * privileges available within the zone (or all privileges if in * the global zone) * (3) operation requires all privileges, regardless of zone * * For (1), priv should be set to the specific privilege, and allzone * should be set to B_FALSE. * For (2), priv should be set to the specific privilege, and allzone * should be set to B_TRUE. * For (3), priv should be set to PRIV_ALL, and allzone should be set * to B_FALSE. * */ /* * The privileges are checked against the Effective set for * ordinary processes and checked against the Limit set * for euid 0 processes that haven't manipulated their privilege * sets. */ #define HAS_ALLPRIVS(cr) priv_isfullset(&CR_OEPRIV(cr)) #define ZONEPRIVS(cr) ((cr)->cr_zone->zone_privset) #define HAS_ALLZONEPRIVS(cr) priv_issubset(ZONEPRIVS(cr), &CR_OEPRIV(cr)) #define HAS_PRIVILEGE(cr, pr) ((pr) == PRIV_ALL ? \ HAS_ALLPRIVS(cr) : \ PRIV_ISASSERT(&CR_OEPRIV(cr), pr)) /* * Policy checking functions * * In future, these will migrate to several files when policy * becomes more or less pluggable. * * For now, there's only one policy and this is it. */ /* * Generic policy calls * * The "bottom" functions of policy control */ static char * mprintf(const char *fmt, ...) { va_list args; char *buf; size_t len; va_start(args, fmt); len = vsnprintf(NULL, 0, fmt, args) + 1; va_end(args); buf = kmem_alloc(len, KM_NOSLEEP); if (buf == NULL) return (NULL); va_start(args, fmt); (void) vsnprintf(buf, len, fmt, args); va_end(args); return (buf); } /* * priv_policy_errmsg() * * Generate an error message if privilege debugging is enabled system wide * or for this particular process. */ #define FMTHDR "%s[%d]: missing privilege \"%s\" (euid = %d, syscall = %d)" #define FMTMSG " for \"%s\"" #define FMTFUN " needed at %s+0x%lx" /* The maximum size privilege format: the concatenation of the above */ #define FMTMAX FMTHDR FMTMSG FMTFUN "\n" static void priv_policy_errmsg(const cred_t *cr, int priv, const char *msg) { struct proc *me; pc_t stack[MAXPRIVSTACK]; int depth; int i; char *sym; ulong_t off; const char *pname; char *cmd; char fmt[sizeof (FMTMAX)]; if ((me = curproc) == &p0) return; /* Privileges must be defined */ ASSERT(priv == PRIV_ALL || priv == PRIV_MULTIPLE || priv == PRIV_ALLZONE || priv == PRIV_GLOBAL || priv_getbynum(priv) != NULL); if (priv == PRIV_ALLZONE && INGLOBALZONE(me)) priv = PRIV_ALL; if (curthread->t_pre_sys) ttolwp(curthread)->lwp_badpriv = (short)priv; if (priv_debug == 0 && (CR_FLAGS(cr) & PRIV_DEBUG) == 0) return; (void) strcpy(fmt, FMTHDR); if (me->p_user.u_comm[0]) cmd = &me->p_user.u_comm[0]; else cmd = "priv_policy"; if (msg != NULL && *msg != '\0') { (void) strcat(fmt, FMTMSG); } else { (void) strcat(fmt, "%s"); msg = ""; } sym = NULL; depth = getpcstack(stack, MAXPRIVSTACK); /* * Try to find the first interesting function on the stack. * priv_policy* that's us, so completely uninteresting. * suser(), drv_priv(), secpolicy_* are also called from * too many locations to convey useful information. */ for (i = 0; i < depth; i++) { sym = kobj_getsymname((uintptr_t)stack[i], &off); if (sym != NULL && strstr(sym, "hasprocperm") == 0 && strcmp("suser", sym) != 0 && strcmp("ipcaccess", sym) != 0 && strcmp("drv_priv", sym) != 0 && strncmp("secpolicy_", sym, 10) != 0 && strncmp("priv_policy", sym, 11) != 0) break; } if (sym != NULL) (void) strcat(fmt, FMTFUN); (void) strcat(fmt, "\n"); switch (priv) { case PRIV_ALL: pname = "ALL"; break; case PRIV_MULTIPLE: pname = "MULTIPLE"; break; case PRIV_ALLZONE: pname = "ZONE"; break; case PRIV_GLOBAL: pname = "GLOBAL"; break; default: pname = priv_getbynum(priv); break; } if (CR_FLAGS(cr) & PRIV_DEBUG) { /* Remember last message, just like lwp_badpriv. */ if (curthread->t_pdmsg != NULL) { kmem_free(curthread->t_pdmsg, strlen(curthread->t_pdmsg) + 1); } curthread->t_pdmsg = mprintf(fmt, cmd, me->p_pid, pname, cr->cr_uid, curthread->t_sysnum, msg, sym, off); curthread->t_post_sys = 1; } else { cmn_err(CE_NOTE, fmt, cmd, me->p_pid, pname, cr->cr_uid, curthread->t_sysnum, msg, sym, off); } } /* * Audit failure, log error message. */ static void priv_policy_err(const cred_t *cr, int priv, boolean_t allzone, const char *msg) { #ifdef C2_AUDIT if (audit_active) audit_priv(priv, allzone ? ZONEPRIVS(cr) : NULL, 0); #endif DTRACE_PROBE2(priv__err, int, priv, boolean_t, allzone); if (priv_debug || (CR_FLAGS(cr) & PRIV_DEBUG) || curthread->t_pre_sys) { if (allzone && !HAS_ALLZONEPRIVS(cr)) { priv_policy_errmsg(cr, PRIV_ALLZONE, msg); } else { ASSERT(!HAS_PRIVILEGE(cr, priv)); priv_policy_errmsg(cr, priv, msg); } } } /* * priv_policy() * return 0 or error. * See block comment above for a description of "priv" and "allzone" usage. */ int priv_policy(const cred_t *cr, int priv, boolean_t allzone, int err, const char *msg) { if (HAS_PRIVILEGE(cr, priv) && (!allzone || HAS_ALLZONEPRIVS(cr))) { if ((allzone || priv == PRIV_ALL || !PRIV_ISASSERT(priv_basic, priv)) && !servicing_interrupt()) { PTOU(curproc)->u_acflag |= ASU; /* Needed for SVVS */ #ifdef C2_AUDIT if (audit_active) audit_priv(priv, allzone ? ZONEPRIVS(cr) : NULL, 1); #endif } err = 0; DTRACE_PROBE2(priv__ok, int, priv, boolean_t, allzone); } else if (!servicing_interrupt()) { /* Failure audited in this procedure */ priv_policy_err(cr, priv, allzone, msg); } return (err); } /* * Return B_TRUE for sufficient privileges, B_FALSE for insufficient privileges. */ boolean_t priv_policy_choice(const cred_t *cr, int priv, boolean_t allzone) { boolean_t res = HAS_PRIVILEGE(cr, priv) && (!allzone || HAS_ALLZONEPRIVS(cr)); #ifdef C2_AUDIT /* Audit success only */ if (res && audit_active && (allzone || priv == PRIV_ALL || !PRIV_ISASSERT(priv_basic, priv)) && !servicing_interrupt()) { audit_priv(priv, allzone ? ZONEPRIVS(cr) : NULL, 1); } #endif if (res) { DTRACE_PROBE2(priv__ok, int, priv, boolean_t, allzone); } else { DTRACE_PROBE2(priv__err, int, priv, boolean_t, allzone); } return (res); } /* * Non-auditing variant of priv_policy_choice(). */ boolean_t priv_policy_only(const cred_t *cr, int priv, boolean_t allzone) { boolean_t res = HAS_PRIVILEGE(cr, priv) && (!allzone || HAS_ALLZONEPRIVS(cr)); if (res) { DTRACE_PROBE2(priv__ok, int, priv, boolean_t, allzone); } else { DTRACE_PROBE2(priv__err, int, priv, boolean_t, allzone); } return (res); } /* * Check whether all privileges in the required set are present. */ static int secpolicy_require_set(const cred_t *cr, const priv_set_t *req, const char *msg) { int priv; int pfound = -1; priv_set_t pset; if (req == PRIV_FULLSET ? HAS_ALLPRIVS(cr) : priv_issubset(req, &CR_OEPRIV(cr))) { return (0); } if (req == PRIV_FULLSET || priv_isfullset(req)) { priv_policy_err(cr, PRIV_ALL, B_FALSE, msg); return (EACCES); } pset = CR_OEPRIV(cr); /* present privileges */ priv_inverse(&pset); /* all non present privileges */ priv_intersect(req, &pset); /* the actual missing privs */ #ifdef C2_AUDIT if (audit_active) audit_priv(PRIV_NONE, &pset, 0); #endif /* * Privilege debugging; special case "one privilege in set". */ if (priv_debug || (CR_FLAGS(cr) & PRIV_DEBUG) || curthread->t_pre_sys) { for (priv = 0; priv < nprivs; priv++) { if (priv_ismember(&pset, priv)) { if (pfound != -1) { /* Multiple missing privs */ priv_policy_errmsg(cr, PRIV_MULTIPLE, msg); return (EACCES); } pfound = priv; } } ASSERT(pfound != -1); /* Just the one missing privilege */ priv_policy_errmsg(cr, pfound, msg); } return (EACCES); } /* * Called when an operation requires that the caller be in the * global zone, regardless of privilege. */ static int priv_policy_global(const cred_t *cr) { if (crgetzoneid(cr) == GLOBAL_ZONEID) return (0); /* success */ if (priv_debug || (CR_FLAGS(cr) & PRIV_DEBUG) || curthread->t_pre_sys) { priv_policy_errmsg(cr, PRIV_GLOBAL, NULL); } return (EPERM); } /* * Changing process priority */ int secpolicy_setpriority(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_PROC_PRIOCNTL, B_FALSE, EPERM, NULL)); } /* * Binding to a privileged port, port must be specified in host byte * order. */ int secpolicy_net_privaddr(const cred_t *cr, in_port_t port) { /* * NFS ports, these are extra privileged ports, allow bind * only if the SYS_NFS privilege is present. */ if (port == 2049 || port == 4045) return (PRIV_POLICY(cr, PRIV_SYS_NFS, B_FALSE, EACCES, "NFS port")); else return (PRIV_POLICY(cr, PRIV_NET_PRIVADDR, B_FALSE, EACCES, NULL)); } /* * Binding to a multilevel port on a trusted (labeled) system. */ int secpolicy_net_bindmlp(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_NET_BINDMLP, B_FALSE, EACCES, NULL)); } /* * Allow a communication between a zone and an unlabeled host when their * labels don't match. */ int secpolicy_net_mac_aware(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_NET_MAC_AWARE, B_FALSE, EACCES, NULL)); } /* * Common routine which determines whether a given credential can * act on a given mount. * When called through mount, the parameter needoptcheck is a pointer * to a boolean variable which will be set to either true or false, * depending on whether the mount policy should change the mount options. * In all other cases, needoptcheck should be a NULL pointer. */ static int secpolicy_fs_common(cred_t *cr, vnode_t *mvp, const vfs_t *vfsp, boolean_t *needoptcheck) { boolean_t allzone = B_FALSE; boolean_t mounting = needoptcheck != NULL; /* * Short circuit the following cases: * vfsp == NULL or mvp == NULL (pure privilege check) * have all privileges - no further checks required * and no mount options need to be set. */ if (vfsp == NULL || mvp == NULL || HAS_ALLPRIVS(cr)) { if (mounting) *needoptcheck = B_FALSE; return (PRIV_POLICY(cr, PRIV_SYS_MOUNT, allzone, EPERM, NULL)); } /* * When operating on an existing mount (either we're not mounting * or we're doing a remount and VFS_REMOUNT will be set), zones * can operate only on mounts established by the zone itself. */ if (!mounting || (vfsp->vfs_flag & VFS_REMOUNT) != 0) { zoneid_t zoneid = crgetzoneid(cr); if (zoneid != GLOBAL_ZONEID && vfsp->vfs_zone->zone_id != zoneid) { return (EPERM); } } if (mounting) *needoptcheck = B_TRUE; /* * Overlay mounts may hide important stuff; if you can't write to a * mount point but would be able to mount on top of it, you can * escalate your privileges. * So we go about asking the same questions namefs does when it * decides whether you can mount over a file or not but with the * added restriction that you can only mount on top of a regular * file or directory. * If we have all the zone's privileges, we skip all other checks, * or else we may actually get in trouble inside the automounter. */ if ((mvp->v_flag & VROOT) != 0 || (mvp->v_type != VDIR && mvp->v_type != VREG) || HAS_ALLZONEPRIVS(cr)) { allzone = B_TRUE; } else { vattr_t va; int err; va.va_mask = AT_UID|AT_MODE; err = VOP_GETATTR(mvp, &va, 0, cr); if (err != 0) return (err); if ((err = secpolicy_vnode_owner(cr, va.va_uid)) != 0) return (err); if ((va.va_mode & VWRITE) == 0 && secpolicy_vnode_access(cr, mvp, va.va_uid, VWRITE) != 0) { return (EACCES); } } return (PRIV_POLICY(cr, PRIV_SYS_MOUNT, allzone, EPERM, NULL)); } extern vnode_t *rootvp; extern vfs_t *rootvfs; int secpolicy_fs_mount(cred_t *cr, vnode_t *mvp, struct vfs *vfsp) { boolean_t needoptchk; int error; /* * If it's a remount, get the underlying mount point, * except for the root where we use the rootvp. */ if ((vfsp->vfs_flag & VFS_REMOUNT) != 0) { if (vfsp == rootvfs) mvp = rootvp; else mvp = vfsp->vfs_vnodecovered; } error = secpolicy_fs_common(cr, mvp, vfsp, &needoptchk); if (error == 0 && needoptchk) { boolean_t amsuper = HAS_ALLZONEPRIVS(cr); /* * Third check; if we don't have either "nosuid" or * both "nosetuid" and "nodevices", then we add * "nosuid"; this depends on how the current * implementation works (it first checks nosuid). In a * zone, a user with all zone privileges can mount with * "setuid" but never with "devices". */ if (!vfs_optionisset(vfsp, MNTOPT_NOSUID, NULL) && (!vfs_optionisset(vfsp, MNTOPT_NODEVICES, NULL) || !vfs_optionisset(vfsp, MNTOPT_NOSETUID, NULL))) { if (crgetzoneid(cr) == GLOBAL_ZONEID || !amsuper) vfs_setmntopt(vfsp, MNTOPT_NOSUID, NULL, 0); else vfs_setmntopt(vfsp, MNTOPT_NODEVICES, NULL, 0); } /* * If we're not the local super user, we set the "restrict" * option to indicate to automountd that this mount should * be handled with care. */ if (!amsuper) vfs_setmntopt(vfsp, MNTOPT_RESTRICT, NULL, 0); } return (error); } /* * Does the policy computations for "ownership" of a mount; * here ownership is defined as the ability to "mount" * the filesystem originally. The rootvfs doesn't cover any * vnodes; we attribute its ownership to the rootvp. */ static int secpolicy_fs_owner(cred_t *cr, const struct vfs *vfsp) { vnode_t *mvp; if (vfsp == NULL) mvp = NULL; else if (vfsp == rootvfs) mvp = rootvp; else mvp = vfsp->vfs_vnodecovered; return (secpolicy_fs_common(cr, mvp, vfsp, NULL)); } int secpolicy_fs_unmount(cred_t *cr, struct vfs *vfsp) { return (secpolicy_fs_owner(cr, vfsp)); } /* * Quotas are a resource, but if one has the ability to mount a filesystem, he * should be able to modify quotas on it. */ int secpolicy_fs_quota(const cred_t *cr, const vfs_t *vfsp) { return (secpolicy_fs_owner((cred_t *)cr, vfsp)); } /* * Exceeding minfree: also a per-mount resource constraint. */ int secpolicy_fs_minfree(const cred_t *cr, const vfs_t *vfsp) { return (secpolicy_fs_owner((cred_t *)cr, vfsp)); } int secpolicy_fs_config(const cred_t *cr, const vfs_t *vfsp) { return (secpolicy_fs_owner((cred_t *)cr, vfsp)); } /* ARGSUSED */ int secpolicy_fs_linkdir(const cred_t *cr, const vfs_t *vfsp) { return (PRIV_POLICY(cr, PRIV_SYS_LINKDIR, B_FALSE, EPERM, NULL)); } /* * Name: secpolicy_vnode_access() * * Parameters: Process credential * vnode * uid of owner of vnode * permission bits not granted to the caller when examining * file mode bits (i.e., when a process wants to open a * mode 444 file for VREAD|VWRITE, this function should be * called only with a VWRITE argument). * * Normal: Verifies that cred has the appropriate privileges to * override the mode bits that were denied. * * Override: file_dac_execute - if VEXEC bit was denied and vnode is * not a directory. * file_dac_read - if VREAD bit was denied. * file_dac_search - if VEXEC bit was denied and vnode is * a directory. * file_dac_write - if VWRITE bit was denied. * * Root owned files are special cased to protect system * configuration files and such. * * Output: EACCES - if privilege check fails. */ /* ARGSUSED */ int secpolicy_vnode_access(const cred_t *cr, vnode_t *vp, uid_t owner, mode_t mode) { if ((mode & VREAD) && PRIV_POLICY(cr, PRIV_FILE_DAC_READ, B_FALSE, EACCES, NULL) != 0) return (EACCES); if (mode & VWRITE) { boolean_t allzone; if (owner == 0 && cr->cr_uid != 0) allzone = B_TRUE; else allzone = B_FALSE; if (PRIV_POLICY(cr, PRIV_FILE_DAC_WRITE, allzone, EACCES, NULL) != 0) return (EACCES); } if (mode & VEXEC) { /* * Directories use file_dac_search to override the execute bit. */ vtype_t vtype = vp->v_type; if (vtype == VDIR) return (PRIV_POLICY(cr, PRIV_FILE_DAC_SEARCH, B_FALSE, EACCES, NULL)); else return (PRIV_POLICY(cr, PRIV_FILE_DAC_EXECUTE, B_FALSE, EACCES, NULL)); } return (0); } /* * Name: secpolicy_vnode_setid_modify() * * Normal: verify that subject can set the file setid flags. * * Output: EPERM - if not privileged. */ static int secpolicy_vnode_setid_modify(const cred_t *cr, uid_t owner) { /* If changing to suid root, must have all zone privs */ boolean_t allzone = B_TRUE; if (owner != 0) { if (owner == cr->cr_uid) return (0); allzone = B_FALSE; } return (PRIV_POLICY(cr, PRIV_FILE_SETID, allzone, EPERM, NULL)); } /* * Are we allowed to retain the set-uid/set-gid bits when * changing ownership or when writing to a file? * "issuid" should be true when set-uid; only in that case * root ownership is checked (setgid is assumed). */ int secpolicy_vnode_setid_retain(const cred_t *cred, boolean_t issuidroot) { if (issuidroot && !HAS_ALLZONEPRIVS(cred)) return (EPERM); return (!PRIV_POLICY_CHOICE(cred, PRIV_FILE_SETID, B_FALSE)); } /* * Name: secpolicy_vnode_setids_setgids() * * Normal: verify that subject can set the file setgid flag. * * Output: EPERM - if not privileged */ int secpolicy_vnode_setids_setgids(const cred_t *cred, gid_t gid) { if (!groupmember(gid, cred)) return (PRIV_POLICY(cred, PRIV_FILE_SETID, B_FALSE, EPERM, NULL)); return (0); } /* * Create a file with a group different than any of the groups allowed: * the group of the directory the file is created in, the effective * group or any of the supplementary groups. */ int secpolicy_vnode_create_gid(const cred_t *cred) { if (HAS_PRIVILEGE(cred, PRIV_FILE_CHOWN)) return (PRIV_POLICY(cred, PRIV_FILE_CHOWN, B_FALSE, EPERM, NULL)); else return (PRIV_POLICY(cred, PRIV_FILE_CHOWN_SELF, B_FALSE, EPERM, NULL)); } /* * Name: secpolicy_vnode_utime_modify() * * Normal: verify that subject can modify the utime on a file. * * Output: EPERM - if access denied. */ static int secpolicy_vnode_utime_modify(const cred_t *cred) { return (PRIV_POLICY(cred, PRIV_FILE_OWNER, B_FALSE, EPERM, "modify file times")); } /* * Name: secpolicy_vnode_setdac() * * Normal: verify that subject can modify the mode of a file. * allzone privilege needed when modifying root owned object. * * Output: EPERM - if access denied. */ int secpolicy_vnode_setdac(const cred_t *cred, uid_t owner) { if (owner == cred->cr_uid) return (0); return (PRIV_POLICY(cred, PRIV_FILE_OWNER, owner == 0, EPERM, NULL)); } /* * Name: secpolicy_vnode_stky_modify() * * Normal: verify that subject can make a file a "sticky". * * Output: EPERM - if access denied. */ int secpolicy_vnode_stky_modify(const cred_t *cred) { return (PRIV_POLICY(cred, PRIV_SYS_CONFIG, B_FALSE, EPERM, "set file sticky")); } /* * Policy determines whether we can remove an entry from a directory, * regardless of permission bits. */ int secpolicy_vnode_remove(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_FILE_OWNER, B_FALSE, EACCES, "sticky directory")); } int secpolicy_vnode_owner(const cred_t *cr, uid_t owner) { boolean_t allzone = (owner == 0); if (owner == cr->cr_uid) return (0); return (PRIV_POLICY(cr, PRIV_FILE_OWNER, allzone, EPERM, NULL)); } void secpolicy_setid_clear(vattr_t *vap, cred_t *cr) { if ((vap->va_mode & (S_ISUID | S_ISGID)) != 0 && secpolicy_vnode_setid_retain(cr, (vap->va_mode & S_ISUID) != 0 && (vap->va_mask & AT_UID) != 0 && vap->va_uid == 0) != 0) { vap->va_mask |= AT_MODE; vap->va_mode &= ~(S_ISUID|S_ISGID); } } int secpolicy_setid_setsticky_clear(vnode_t *vp, vattr_t *vap, const vattr_t *ovap, cred_t *cr) { int error; if ((vap->va_mode & S_ISUID) != 0 && (error = secpolicy_vnode_setid_modify(cr, ovap->va_uid)) != 0) { return (error); } /* * Check privilege if attempting to set the * sticky bit on a non-directory. */ if (vp->v_type != VDIR && (vap->va_mode & S_ISVTX) != 0 && secpolicy_vnode_stky_modify(cr) != 0) { vap->va_mode &= ~S_ISVTX; } /* * Check for privilege if attempting to set the * group-id bit. */ if ((vap->va_mode & S_ISGID) != 0 && secpolicy_vnode_setids_setgids(cr, ovap->va_gid) != 0) { vap->va_mode &= ~S_ISGID; } return (0); } /* * This function checks the policy decisions surrounding the * vop setattr call. * * It should be called after sufficient locks have been established * on the underlying data structures. No concurrent modifications * should be allowed. * * The caller must pass in unlocked version of its vaccess function * this is required because vop_access function should lock the * node for reading. A three argument function should be defined * which accepts the following argument: * A pointer to the internal "node" type (inode *) * vnode access bits (VREAD|VWRITE|VEXEC) * a pointer to the credential * * This function makes the following policy decisions: * * - change permissions * - permission to change file mode if not owner * - permission to add sticky bit to non-directory * - permission to add set-gid bit * * The ovap argument should include AT_MODE|AT_UID|AT_GID. * * If the vap argument does not include AT_MODE, the mode will be copied from * ovap. In certain situations set-uid/set-gid bits need to be removed; * this is done by marking vap->va_mask to include AT_MODE and va_mode * is updated to the newly computed mode. */ int secpolicy_vnode_setattr(cred_t *cr, struct vnode *vp, struct vattr *vap, const struct vattr *ovap, int flags, int unlocked_access(void *, int, cred_t *), void *node) { int mask = vap->va_mask; int error = 0; if (mask & AT_SIZE) { if (vp->v_type == VDIR) { error = EISDIR; goto out; } error = unlocked_access(node, VWRITE, cr); if (error) goto out; } if (mask & AT_MODE) { /* * If not the owner of the file then check privilege * for two things: the privilege to set the mode at all * and, if we're setting setuid, we also need permissions * to add the set-uid bit, if we're not the owner. * In the specific case of creating a set-uid root * file, we need even more permissions. */ if ((error = secpolicy_vnode_setdac(cr, ovap->va_uid)) != 0) goto out; if ((error = secpolicy_setid_setsticky_clear(vp, vap, ovap, cr)) != 0) goto out; } else vap->va_mode = ovap->va_mode; if (mask & (AT_UID|AT_GID)) { boolean_t checkpriv = B_FALSE; int priv; boolean_t allzone = B_FALSE; /* * Chowning files. * * If you are the file owner: * chown to other uid FILE_CHOWN_SELF * chown to gid (non-member) FILE_CHOWN_SELF * chown to gid (member) * * Instead of PRIV_FILE_CHOWN_SELF, FILE_CHOWN is also * acceptable but the first one is reported when debugging. * * If you are not the file owner: * chown from root PRIV_FILE_CHOWN + zone * chown from other to any PRIV_FILE_CHOWN * */ if (cr->cr_uid != ovap->va_uid) { checkpriv = B_TRUE; allzone = (ovap->va_uid == 0); priv = PRIV_FILE_CHOWN; } else { if (((mask & AT_UID) && vap->va_uid != ovap->va_uid) || ((mask & AT_GID) && vap->va_gid != ovap->va_gid && !groupmember(vap->va_gid, cr))) { checkpriv = B_TRUE; priv = HAS_PRIVILEGE(cr, PRIV_FILE_CHOWN) ? PRIV_FILE_CHOWN : PRIV_FILE_CHOWN_SELF; } } /* * If necessary, check privilege to see if update can be done. */ if (checkpriv && (error = PRIV_POLICY(cr, priv, allzone, EPERM, NULL)) != 0) { goto out; } /* * If the file has either the set UID or set GID bits * set and the caller can set the bits, then leave them. */ secpolicy_setid_clear(vap, cr); } if (mask & (AT_ATIME|AT_MTIME)) { /* * If not the file owner and not otherwise privileged, * always return an error when setting the * time other than the current (ATTR_UTIME flag set). * If setting the current time (ATTR_UTIME not set) then * unlocked_access will check permissions according to policy. */ if (cr->cr_uid != ovap->va_uid) { if (flags & ATTR_UTIME) error = secpolicy_vnode_utime_modify(cr); else { error = unlocked_access(node, VWRITE, cr); if (error == EACCES && secpolicy_vnode_utime_modify(cr) == 0) error = 0; } if (error) goto out; } } out: return (error); } /* * Name: secpolicy_pcfs_modify_bootpartition() * * Normal: verify that subject can modify a pcfs boot partition. * * Output: EACCES - if privilege check failed. */ /*ARGSUSED*/ int secpolicy_pcfs_modify_bootpartition(const cred_t *cred) { return (PRIV_POLICY(cred, PRIV_ALL, B_FALSE, EACCES, "modify pcfs boot partition")); } /* * System V IPC routines */ int secpolicy_ipc_owner(const cred_t *cr, const struct kipc_perm *ip) { if (crgetzoneid(cr) != ip->ipc_zoneid || (cr->cr_uid != ip->ipc_uid && cr->cr_uid != ip->ipc_cuid)) { boolean_t allzone = B_FALSE; if (ip->ipc_uid == 0 || ip->ipc_cuid == 0) allzone = B_TRUE; return (PRIV_POLICY(cr, PRIV_IPC_OWNER, allzone, EPERM, NULL)); } return (0); } int secpolicy_ipc_config(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_IPC_CONFIG, B_FALSE, EPERM, NULL)); } int secpolicy_ipc_access(const cred_t *cr, const struct kipc_perm *ip, mode_t mode) { boolean_t allzone = B_FALSE; ASSERT((mode & (MSG_R|MSG_W)) != 0); if ((mode & MSG_R) && PRIV_POLICY(cr, PRIV_IPC_DAC_READ, allzone, EACCES, NULL) != 0) return (EACCES); if (mode & MSG_W) { if (cr->cr_uid != 0 && (ip->ipc_uid == 0 || ip->ipc_cuid == 0)) allzone = B_TRUE; return (PRIV_POLICY(cr, PRIV_IPC_DAC_WRITE, allzone, EACCES, NULL)); } return (0); } int secpolicy_rsm_access(const cred_t *cr, uid_t owner, mode_t mode) { boolean_t allzone = B_FALSE; ASSERT((mode & (MSG_R|MSG_W)) != 0); if ((mode & MSG_R) && PRIV_POLICY(cr, PRIV_IPC_DAC_READ, allzone, EACCES, NULL) != 0) return (EACCES); if (mode & MSG_W) { if (cr->cr_uid != 0 && owner == 0) allzone = B_TRUE; return (PRIV_POLICY(cr, PRIV_IPC_DAC_WRITE, allzone, EACCES, NULL)); } return (0); } /* * Audit configuration. */ int secpolicy_audit_config(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_AUDIT, B_FALSE, EPERM, NULL)); } /* * Audit record generation. */ int secpolicy_audit_modify(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_PROC_AUDIT, B_FALSE, EPERM, NULL)); } /* * Get audit attributes. * Either PRIV_SYS_AUDIT or PRIV_PROC_AUDIT required; report the * "Least" of the two privileges on error. */ int secpolicy_audit_getattr(const cred_t *cr) { if (!PRIV_POLICY_ONLY(cr, PRIV_SYS_AUDIT, B_FALSE)) { return (PRIV_POLICY(cr, PRIV_PROC_AUDIT, B_FALSE, EPERM, NULL)); } else { return (PRIV_POLICY(cr, PRIV_SYS_AUDIT, B_FALSE, EPERM, NULL)); } } /* * Locking physical memory */ int secpolicy_lock_memory(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_PROC_LOCK_MEMORY, B_FALSE, EPERM, NULL)); } /* * Accounting (both acct(2) and exacct). */ int secpolicy_acct(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_ACCT, B_FALSE, EPERM, NULL)); } /* * Is this process privileged to change its uids at will? * Uid 0 is still considered "special" and having the SETID * privilege is not sufficient to get uid 0. * Files are owned by root, so the privilege would give * full access and euid 0 is still effective. * * If you have the privilege and euid 0 only then do you * get the powers of root wrt uid 0. * * For gid manipulations, this is should be called with an * uid of -1. * */ int secpolicy_allow_setid(const cred_t *cr, uid_t newuid, boolean_t checkonly) { boolean_t allzone = B_FALSE; if (newuid == 0 && cr->cr_uid != 0 && cr->cr_suid != 0 && cr->cr_ruid != 0) { allzone = B_TRUE; } return (checkonly ? !PRIV_POLICY_ONLY(cr, PRIV_PROC_SETID, allzone) : PRIV_POLICY(cr, PRIV_PROC_SETID, allzone, EPERM, NULL)); } /* * Acting on a different process: if the mode is for writing, * the restrictions are more severe. This is called after * we've verified that the uids do not match. */ int secpolicy_proc_owner(const cred_t *scr, const cred_t *tcr, int mode) { boolean_t allzone = B_FALSE; if ((mode & VWRITE) && scr->cr_uid != 0 && (tcr->cr_uid == 0 || tcr->cr_ruid == 0 || tcr->cr_suid == 0)) allzone = B_TRUE; return (PRIV_POLICY(scr, PRIV_PROC_OWNER, allzone, EPERM, NULL)); } int secpolicy_proc_access(const cred_t *scr) { return (PRIV_POLICY(scr, PRIV_PROC_OWNER, B_FALSE, EACCES, NULL)); } int secpolicy_proc_excl_open(const cred_t *scr) { return (PRIV_POLICY(scr, PRIV_PROC_OWNER, B_FALSE, EBUSY, NULL)); } int secpolicy_proc_zone(const cred_t *scr) { return (PRIV_POLICY(scr, PRIV_PROC_ZONE, B_FALSE, EPERM, NULL)); } /* * Destroying the system */ int secpolicy_kmdb(const cred_t *scr) { return (PRIV_POLICY(scr, PRIV_ALL, B_FALSE, EPERM, NULL)); } int secpolicy_error_inject(const cred_t *scr) { return (PRIV_POLICY(scr, PRIV_ALL, B_FALSE, EPERM, NULL)); } /* * Processor sets, cpu configuration, resource pools. */ int secpolicy_pset(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_RES_CONFIG, B_FALSE, EPERM, NULL)); } int secpolicy_ponline(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_RES_CONFIG, B_FALSE, EPERM, NULL)); } int secpolicy_pool(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_RES_CONFIG, B_FALSE, EPERM, NULL)); } int secpolicy_blacklist(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_RES_CONFIG, B_FALSE, EPERM, NULL)); } /* * Catch all system configuration. */ int secpolicy_sys_config(const cred_t *cr, boolean_t checkonly) { if (checkonly) { return (PRIV_POLICY_ONLY(cr, PRIV_SYS_CONFIG, B_FALSE) ? 0 : EPERM); } else { return (PRIV_POLICY(cr, PRIV_SYS_CONFIG, B_FALSE, EPERM, NULL)); } } /* * Zone administration (halt, reboot, etc.) from within zone. */ int secpolicy_zone_admin(const cred_t *cr, boolean_t checkonly) { if (checkonly) { return (PRIV_POLICY_ONLY(cr, PRIV_SYS_ADMIN, B_FALSE) ? 0 : EPERM); } else { return (PRIV_POLICY(cr, PRIV_SYS_ADMIN, B_FALSE, EPERM, NULL)); } } /* * Zone configuration (create, halt, enter). */ int secpolicy_zone_config(const cred_t *cr) { /* * Require all privileges to avoid possibility of privilege * escalation. */ return (secpolicy_require_set(cr, PRIV_FULLSET, NULL)); } /* * Various other system configuration calls */ int secpolicy_coreadm(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_ADMIN, B_FALSE, EPERM, NULL)); } int secpolicy_systeminfo(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_ADMIN, B_FALSE, EPERM, NULL)); } int secpolicy_dispadm(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_CONFIG, B_FALSE, EPERM, NULL)); } int secpolicy_settime(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_TIME, B_FALSE, EPERM, NULL)); } /* * For realtime users: high resolution clock. */ int secpolicy_clock_highres(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_PROC_CLOCK_HIGHRES, B_FALSE, EPERM, NULL)); } /* * drv_priv() is documented as callable from interrupt context, not that * anyone ever does, but still. No debugging or auditing can be done when * it is called from interrupt context. * returns 0 on succes, EPERM on failure. */ int drv_priv(cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EPERM, NULL)); } int secpolicy_sys_devices(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EPERM, NULL)); } int secpolicy_excl_open(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EBUSY, NULL)); } int secpolicy_rctlsys(const cred_t *cr, boolean_t is_zone_rctl) { /* zone.* rctls can only be set from the global zone */ if (is_zone_rctl && priv_policy_global(cr) != 0) return (EPERM); return (PRIV_POLICY(cr, PRIV_SYS_RESOURCE, B_FALSE, EPERM, NULL)); } int secpolicy_resource(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_RESOURCE, B_FALSE, EPERM, NULL)); } /* * Processes with a real uid of 0 escape any form of accounting, much * like before. */ int secpolicy_newproc(const cred_t *cr) { if (cr->cr_ruid == 0) return (0); return (PRIV_POLICY(cr, PRIV_SYS_RESOURCE, B_FALSE, EPERM, NULL)); } /* * Networking */ int secpolicy_net_rawaccess(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_NET_RAWACCESS, B_FALSE, EACCES, NULL)); } /* * Need this privilege for accessing the ICMP device */ int secpolicy_net_icmpaccess(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_NET_ICMPACCESS, B_FALSE, EACCES, NULL)); } /* * There are a few rare cases where the kernel generates ioctls() from * interrupt context with a credential of kcred rather than NULL. * In those cases, we take the safe and cheap test. */ int secpolicy_net_config(const cred_t *cr, boolean_t checkonly) { if (checkonly) { return (PRIV_POLICY_ONLY(cr, PRIV_SYS_NET_CONFIG, B_FALSE) ? 0 : EPERM); } else { return (PRIV_POLICY(cr, PRIV_SYS_NET_CONFIG, B_FALSE, EPERM, NULL)); } } /* * PRIV_SYS_NET_CONFIG has a superset of PRIV_SYS_IP_CONFIG. * * There are a few rare cases where the kernel generates ioctls() from * interrupt context with a credential of kcred rather than NULL. * In those cases, we take the safe and cheap test. */ int secpolicy_ip_config(const cred_t *cr, boolean_t checkonly) { if (PRIV_POLICY_ONLY(cr, PRIV_SYS_NET_CONFIG, B_FALSE)) return (secpolicy_net_config(cr, checkonly)); if (checkonly) { return (PRIV_POLICY_ONLY(cr, PRIV_SYS_IP_CONFIG, B_FALSE) ? 0 : EPERM); } else { return (PRIV_POLICY(cr, PRIV_SYS_IP_CONFIG, B_FALSE, EPERM, NULL)); } } /* * Map IP pseudo privileges to actual privileges. * So we don't need to recompile IP when we change the privileges. */ int secpolicy_ip(const cred_t *cr, int netpriv, boolean_t checkonly) { int priv = PRIV_ALL; switch (netpriv) { case OP_CONFIG: priv = PRIV_SYS_IP_CONFIG; break; case OP_RAW: priv = PRIV_NET_RAWACCESS; break; case OP_PRIVPORT: priv = PRIV_NET_PRIVADDR; break; } ASSERT(priv != PRIV_ALL); if (checkonly) return (PRIV_POLICY_ONLY(cr, priv, B_FALSE) ? 0 : EPERM); else return (PRIV_POLICY(cr, priv, B_FALSE, EPERM, NULL)); } /* * Map network pseudo privileges to actual privileges. * So we don't need to recompile IP when we change the privileges. */ int secpolicy_net(const cred_t *cr, int netpriv, boolean_t checkonly) { int priv = PRIV_ALL; switch (netpriv) { case OP_CONFIG: priv = PRIV_SYS_NET_CONFIG; break; case OP_RAW: priv = PRIV_NET_RAWACCESS; break; case OP_PRIVPORT: priv = PRIV_NET_PRIVADDR; break; } ASSERT(priv != PRIV_ALL); if (checkonly) return (PRIV_POLICY_ONLY(cr, priv, B_FALSE) ? 0 : EPERM); else return (PRIV_POLICY(cr, priv, B_FALSE, EPERM, NULL)); } /* * Checks for operations that are either client-only or are used by * both clients and servers. */ int secpolicy_nfs(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_NFS, B_FALSE, EPERM, NULL)); } /* * Special case for opening rpcmod: have NFS privileges or network * config privileges. */ int secpolicy_rpcmod_open(const cred_t *cr) { if (PRIV_POLICY_ONLY(cr, PRIV_SYS_NFS, B_FALSE)) return (secpolicy_nfs(cr)); else return (secpolicy_net_config(cr, NULL)); } int secpolicy_chroot(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_PROC_CHROOT, B_FALSE, EPERM, NULL)); } int secpolicy_tasksys(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_PROC_TASKID, B_FALSE, EPERM, NULL)); } /* * Basic privilege checks. */ int secpolicy_basic_exec(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_PROC_EXEC, B_FALSE, EPERM, NULL)); } int secpolicy_basic_fork(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_PROC_FORK, B_FALSE, EPERM, NULL)); } int secpolicy_basic_proc(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_PROC_SESSION, B_FALSE, EPERM, NULL)); } /* * Slightly complicated because we don't want to trigger the policy too * often. First we shortcircuit access to "self" (tp == sp) or if * we don't have the privilege but if we have permission * just return (0) and we don't flag the privilege as needed. * Else, we test for the privilege because we either have it or need it. */ int secpolicy_basic_procinfo(const cred_t *cr, proc_t *tp, proc_t *sp) { if (tp == sp || !HAS_PRIVILEGE(cr, PRIV_PROC_INFO) && prochasprocperm(tp, sp, cr)) { return (0); } else { return (PRIV_POLICY(cr, PRIV_PROC_INFO, B_FALSE, EPERM, NULL)); } } int secpolicy_basic_link(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_FILE_LINK_ANY, B_FALSE, EPERM, NULL)); } /* * Additional device protection. * * Traditionally, a device has specific permissions on the node in * the filesystem which govern which devices can be opened by what * processes. In certain cases, it is desirable to add extra * restrictions, as writing to certain devices is identical to * having a complete run of the system. * * This mechanism is called the device policy. * * When a device is opened, its policy entry is looked up in the * policy cache and checked. */ int secpolicy_spec_open(const cred_t *cr, struct vnode *vp, int oflag) { devplcy_t *plcy; int err; struct snode *csp = VTOS(common_specvp(vp)); mutex_enter(&csp->s_lock); if (csp->s_plcy == NULL || csp->s_plcy->dp_gen != devplcy_gen) { plcy = devpolicy_find(vp); if (csp->s_plcy) dpfree(csp->s_plcy); csp->s_plcy = plcy; ASSERT(plcy != NULL); } else plcy = csp->s_plcy; if (plcy == nullpolicy) { mutex_exit(&csp->s_lock); return (0); } dphold(plcy); mutex_exit(&csp->s_lock); err = secpolicy_require_set(cr, (oflag & FWRITE) ? &plcy->dp_wrp : &plcy->dp_rdp, "devpolicy"); dpfree(plcy); return (err); } int secpolicy_modctl(const cred_t *cr, int cmd) { switch (cmd) { case MODINFO: case MODGETMAJBIND: case MODGETPATH: case MODGETPATHLEN: case MODGETNAME: case MODGETFBNAME: case MODGETDEVPOLICY: case MODGETDEVPOLICYBYNAME: case MODDEVT2INSTANCE: case MODSIZEOF_DEVID: case MODGETDEVID: case MODSIZEOF_MINORNAME: case MODGETMINORNAME: case MODGETDEVFSPATH_LEN: case MODGETDEVFSPATH: case MODGETDEVFSPATH_MI_LEN: case MODGETDEVFSPATH_MI: /* Unprivileged */ return (0); case MODLOAD: case MODSETDEVPOLICY: return (secpolicy_require_set(cr, PRIV_FULLSET, NULL)); default: return (secpolicy_sys_config(cr, B_FALSE)); } } int secpolicy_console(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EPERM, NULL)); } int secpolicy_power_mgmt(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EPERM, NULL)); } /* * Simulate terminal input; another escalation of privileges avenue. */ int secpolicy_sti(const cred_t *cr) { return (secpolicy_require_set(cr, PRIV_FULLSET, NULL)); } boolean_t secpolicy_net_reply_equal(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_CONFIG, B_FALSE, EPERM, NULL)); } int secpolicy_swapctl(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_CONFIG, B_FALSE, EPERM, NULL)); } int secpolicy_cpc_cpu(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_CPC_CPU, B_FALSE, EACCES, NULL)); } /* * secpolicy_contract_observer * * Determine if the subject may observe a specific contract's events. */ int secpolicy_contract_observer(const cred_t *cr, struct contract *ct) { if (contract_owned(ct, cr, B_FALSE)) return (0); return (PRIV_POLICY(cr, PRIV_CONTRACT_OBSERVER, B_FALSE, EPERM, NULL)); } /* * secpolicy_contract_observer_choice * * Determine if the subject may observe any contract's events. Just * tests privilege and audits on success. */ boolean_t secpolicy_contract_observer_choice(const cred_t *cr) { return (PRIV_POLICY_CHOICE(cr, PRIV_CONTRACT_OBSERVER, B_FALSE)); } /* * secpolicy_contract_event * * Determine if the subject may request critical contract events or * reliable contract event delivery. */ int secpolicy_contract_event(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_CONTRACT_EVENT, B_FALSE, EPERM, NULL)); } /* * secpolicy_contract_event_choice * * Determine if the subject may retain contract events in its critical * set when a change in other terms would normally require a change in * the critical set. Just tests privilege and audits on success. */ boolean_t secpolicy_contract_event_choice(const cred_t *cr) { return (PRIV_POLICY_CHOICE(cr, PRIV_CONTRACT_EVENT, B_FALSE)); } /* * secpolicy_gart_access * * Determine if the subject has sufficient priveleges to make ioctls to agpgart * device. */ int secpolicy_gart_access(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_GRAPHICS_ACCESS, B_FALSE, EPERM, NULL)); } /* * secpolicy_gart_map * * Determine if the subject has sufficient priveleges to map aperture range * through agpgart driver. */ int secpolicy_gart_map(const cred_t *cr) { if (PRIV_POLICY_ONLY(cr, PRIV_GRAPHICS_ACCESS, B_FALSE)) { return (PRIV_POLICY(cr, PRIV_GRAPHICS_ACCESS, B_FALSE, EPERM, NULL)); } else { return (PRIV_POLICY(cr, PRIV_GRAPHICS_MAP, B_FALSE, EPERM, NULL)); } } /* * secpolicy_zinject * * Determine if the subject can inject faults in the ZFS fault injection * framework. Requires all privileges. */ int secpolicy_zinject(const cred_t *cr) { return (secpolicy_require_set(cr, PRIV_FULLSET, NULL)); } /* * secpolicy_zfs * * Determine if the subject has permission to manipulate ZFS datasets * (not pools). Equivalent to the SYS_MOUNT privilege. */ int secpolicy_zfs(const cred_t *cr) { return (PRIV_POLICY(cr, PRIV_SYS_MOUNT, B_FALSE, EPERM, NULL)); }