/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. * Copyright 2014 Joyent, Inc. All rights reserved. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * Theory statement: * * The main driving force behind mmapobj is to interpret and map ELF files * inside of the kernel instead of having the linker be responsible for this. * * mmapobj also supports the AOUT 4.x binary format as well as flat files in * a read only manner. * * When interpreting and mapping an ELF file, mmapobj will map each PT_LOAD * or PT_SUNWBSS segment according to the ELF standard. Refer to the "Linker * and Libraries Guide" for more information about the standard and mapping * rules. * * Having mmapobj interpret and map objects will allow the kernel to make the * best decision for where to place the mappings for said objects. Thus, we * can make optimizations inside of the kernel for specific platforms or cache * mapping information to make mapping objects faster. The cache is ignored * if ASLR is enabled. * * The lib_va_hash will be one such optimization. For each ELF object that * mmapobj is asked to interpret, we will attempt to cache the information * about the PT_LOAD and PT_SUNWBSS sections to speed up future mappings of * the same objects. We will cache up to LIBVA_CACHED_SEGS (see below) program * headers which should cover a majority of the libraries out there without * wasting space. In order to make sure that the cached information is valid, * we check the passed in vnode's mtime and ctime to make sure the vnode * has not been modified since the last time we used it. * * In addition, the lib_va_hash may contain a preferred starting VA for the * object which can be useful for platforms which support a shared context. * This will increase the likelyhood that library text can be shared among * many different processes. We limit the reserved VA space for 32 bit objects * in order to minimize fragmenting the processes address space. * * In addition to the above, the mmapobj interface allows for padding to be * requested before the first mapping and after the last mapping created. * When padding is requested, no additional optimizations will be made for * that request. */ /* * Threshold to prevent allocating too much kernel memory to read in the * program headers for an object. If it requires more than below, * we will use a KM_NOSLEEP allocation to allocate memory to hold all of the * program headers which could possibly fail. If less memory than below is * needed, then we use a KM_SLEEP allocation and are willing to wait for the * memory if we need to. */ size_t mmapobj_alloc_threshold = 65536; /* Debug stats for test coverage */ #ifdef DEBUG struct mobj_stats { uint_t mobjs_unmap_called; uint_t mobjs_remap_devnull; uint_t mobjs_lookup_start; uint_t mobjs_alloc_start; uint_t mobjs_alloc_vmem; uint_t mobjs_add_collision; uint_t mobjs_get_addr; uint_t mobjs_map_flat_no_padding; uint_t mobjs_map_flat_padding; uint_t mobjs_map_ptload_text; uint_t mobjs_map_ptload_initdata; uint_t mobjs_map_ptload_preread; uint_t mobjs_map_ptload_unaligned_text; uint_t mobjs_map_ptload_unaligned_map_fail; uint_t mobjs_map_ptload_unaligned_read_fail; uint_t mobjs_zfoddiff; uint_t mobjs_zfoddiff_nowrite; uint_t mobjs_zfodextra; uint_t mobjs_ptload_failed; uint_t mobjs_map_elf_no_holes; uint_t mobjs_unmap_hole; uint_t mobjs_nomem_header; uint_t mobjs_inval_header; uint_t mobjs_overlap_header; uint_t mobjs_np2_align; uint_t mobjs_np2_align_overflow; uint_t mobjs_exec_padding; uint_t mobjs_exec_addr_mapped; uint_t mobjs_exec_addr_devnull; uint_t mobjs_exec_addr_in_use; uint_t mobjs_lvp_found; uint_t mobjs_no_loadable_yet; uint_t mobjs_nothing_to_map; uint_t mobjs_e2big; uint_t mobjs_dyn_pad_align; uint_t mobjs_dyn_pad_noalign; uint_t mobjs_alloc_start_fail; uint_t mobjs_lvp_nocache; uint_t mobjs_extra_padding; uint_t mobjs_lvp_not_needed; uint_t mobjs_no_mem_map_sz; uint_t mobjs_check_exec_failed; uint_t mobjs_lvp_used; uint_t mobjs_wrong_model; uint_t mobjs_noexec_fs; uint_t mobjs_e2big_et_rel; uint_t mobjs_et_rel_mapped; uint_t mobjs_unknown_elf_type; uint_t mobjs_phent32_too_small; uint_t mobjs_phent64_too_small; uint_t mobjs_inval_elf_class; uint_t mobjs_too_many_phdrs; uint_t mobjs_no_phsize; uint_t mobjs_phsize_large; uint_t mobjs_phsize_xtralarge; uint_t mobjs_fast_wrong_model; uint_t mobjs_fast_e2big; uint_t mobjs_fast; uint_t mobjs_fast_success; uint_t mobjs_fast_not_now; uint_t mobjs_small_file; uint_t mobjs_read_error; uint_t mobjs_unsupported; uint_t mobjs_flat_e2big; uint_t mobjs_phent_align32; uint_t mobjs_phent_align64; uint_t mobjs_lib_va_find_hit; uint_t mobjs_lib_va_find_delay_delete; uint_t mobjs_lib_va_find_delete; uint_t mobjs_lib_va_add_delay_delete; uint_t mobjs_lib_va_add_delete; uint_t mobjs_lib_va_create_failure; uint_t mobjs_min_align; #if defined(__sparc) uint_t mobjs_aout_uzero_fault; uint_t mobjs_aout_64bit_try; uint_t mobjs_aout_noexec; uint_t mobjs_aout_e2big; uint_t mobjs_aout_lib; uint_t mobjs_aout_fixed; uint_t mobjs_aout_zfoddiff; uint_t mobjs_aout_map_bss; uint_t mobjs_aout_bss_fail; uint_t mobjs_aout_nlist; uint_t mobjs_aout_addr_in_use; #endif } mobj_stats; #define MOBJ_STAT_ADD(stat) ((mobj_stats.mobjs_##stat)++) #else #define MOBJ_STAT_ADD(stat) #endif /* * Check if addr is at or above the address space reserved for the stack. * The stack is at the top of the address space for all sparc processes * and 64 bit x86 processes. For 32 bit x86, the stack is not at the top * of the address space and thus this check wil always return false for * 32 bit x86 processes. */ #if defined(__sparc) #define OVERLAPS_STACK(addr, p) \ (addr >= (p->p_usrstack - ((p->p_stk_ctl + PAGEOFFSET) & PAGEMASK))) #elif defined(__amd64) #define OVERLAPS_STACK(addr, p) \ ((p->p_model == DATAMODEL_LP64) && \ (addr >= (p->p_usrstack - ((p->p_stk_ctl + PAGEOFFSET) & PAGEMASK)))) #elif defined(__i386) #define OVERLAPS_STACK(addr, p) 0 #endif /* lv_flags values - bitmap */ #define LV_ELF32 0x1 /* 32 bit ELF file */ #define LV_ELF64 0x2 /* 64 bit ELF file */ #define LV_DEL 0x4 /* delete when lv_refcnt hits zero */ /* * Note: lv_num_segs will denote how many segments this file has and will * only be set after the lv_mps array has been filled out. * lv_mps can only be valid if lv_num_segs is non-zero. */ struct lib_va { struct lib_va *lv_next; caddr_t lv_base_va; /* start va for library */ ssize_t lv_len; /* total va span of library */ size_t lv_align; /* minimum alignment */ uint64_t lv_nodeid; /* filesystem node id */ uint64_t lv_fsid; /* filesystem id */ timestruc_t lv_ctime; /* last time file was changed */ timestruc_t lv_mtime; /* or modified */ mmapobj_result_t lv_mps[LIBVA_CACHED_SEGS]; /* cached pheaders */ int lv_num_segs; /* # segs for this file */ int lv_flags; uint_t lv_refcnt; /* number of holds on struct */ }; #define LIB_VA_SIZE 1024 #define LIB_VA_MASK (LIB_VA_SIZE - 1) #define LIB_VA_MUTEX_SHIFT 3 #if (LIB_VA_SIZE & (LIB_VA_SIZE - 1)) #error "LIB_VA_SIZE is not a power of 2" #endif static struct lib_va *lib_va_hash[LIB_VA_SIZE]; static kmutex_t lib_va_hash_mutex[LIB_VA_SIZE >> LIB_VA_MUTEX_SHIFT]; #define LIB_VA_HASH_MUTEX(index) \ (&lib_va_hash_mutex[index >> LIB_VA_MUTEX_SHIFT]) #define LIB_VA_HASH(nodeid) \ (((nodeid) ^ ((nodeid) << 7) ^ ((nodeid) << 13)) & LIB_VA_MASK) #define LIB_VA_MATCH_ID(arg1, arg2) \ ((arg1)->lv_nodeid == (arg2)->va_nodeid && \ (arg1)->lv_fsid == (arg2)->va_fsid) #define LIB_VA_MATCH_TIME(arg1, arg2) \ ((arg1)->lv_ctime.tv_sec == (arg2)->va_ctime.tv_sec && \ (arg1)->lv_mtime.tv_sec == (arg2)->va_mtime.tv_sec && \ (arg1)->lv_ctime.tv_nsec == (arg2)->va_ctime.tv_nsec && \ (arg1)->lv_mtime.tv_nsec == (arg2)->va_mtime.tv_nsec) #define LIB_VA_MATCH(arg1, arg2) \ (LIB_VA_MATCH_ID(arg1, arg2) && LIB_VA_MATCH_TIME(arg1, arg2)) /* * lib_va will be used for optimized allocation of address ranges for * libraries, such that subsequent mappings of the same library will attempt * to use the same VA as previous mappings of that library. * In order to map libraries at the same VA in many processes, we need to carve * out our own address space for them which is unique across many processes. * We use different arenas for 32 bit and 64 bit libraries. * * Since the 32 bit address space is relatively small, we limit the number of * libraries which try to use consistent virtual addresses to lib_threshold. * For 64 bit libraries there is no such limit since the address space is large. */ static vmem_t *lib_va_32_arena; static vmem_t *lib_va_64_arena; uint_t lib_threshold = 20; /* modifiable via /etc/system */ static kmutex_t lib_va_init_mutex; /* no need to initialize */ /* * Number of 32 bit and 64 bit libraries in lib_va hash. */ static uint_t libs_mapped_32 = 0; static uint_t libs_mapped_64 = 0; /* * Free up the resources associated with lvp as well as lvp itself. * We also decrement the number of libraries mapped via a lib_va * cached virtual address. */ void lib_va_free(struct lib_va *lvp) { int is_64bit = lvp->lv_flags & LV_ELF64; ASSERT(lvp->lv_refcnt == 0); if (lvp->lv_base_va != NULL) { vmem_xfree(is_64bit ? lib_va_64_arena : lib_va_32_arena, lvp->lv_base_va, lvp->lv_len); if (is_64bit) { atomic_dec_32(&libs_mapped_64); } else { atomic_dec_32(&libs_mapped_32); } } kmem_free(lvp, sizeof (struct lib_va)); } /* * See if the file associated with the vap passed in is in the lib_va hash. * If it is and the file has not been modified since last use, then * return a pointer to that data. Otherwise, return NULL if the file has * changed or the file was not found in the hash. */ static struct lib_va * lib_va_find(vattr_t *vap) { struct lib_va *lvp; struct lib_va *del = NULL; struct lib_va **tmp; uint_t index; index = LIB_VA_HASH(vap->va_nodeid); mutex_enter(LIB_VA_HASH_MUTEX(index)); tmp = &lib_va_hash[index]; while (*tmp != NULL) { lvp = *tmp; if (LIB_VA_MATCH_ID(lvp, vap)) { if (LIB_VA_MATCH_TIME(lvp, vap)) { ASSERT((lvp->lv_flags & LV_DEL) == 0); lvp->lv_refcnt++; MOBJ_STAT_ADD(lib_va_find_hit); } else { /* * file was updated since last use. * need to remove it from list. */ del = lvp; *tmp = del->lv_next; del->lv_next = NULL; /* * If we can't delete it now, mark it for later */ if (del->lv_refcnt) { MOBJ_STAT_ADD(lib_va_find_delay_delete); del->lv_flags |= LV_DEL; del = NULL; } lvp = NULL; } mutex_exit(LIB_VA_HASH_MUTEX(index)); if (del) { ASSERT(del->lv_refcnt == 0); MOBJ_STAT_ADD(lib_va_find_delete); lib_va_free(del); } return (lvp); } tmp = &lvp->lv_next; } mutex_exit(LIB_VA_HASH_MUTEX(index)); return (NULL); } /* * Add a new entry to the lib_va hash. * Search the hash while holding the appropriate mutex to make sure that the * data is not already in the cache. If we find data that is in the cache * already and has not been modified since last use, we return NULL. If it * has been modified since last use, we will remove that entry from * the hash and it will be deleted once it's reference count reaches zero. * If there is no current entry in the hash we will add the new entry and * return it to the caller who is responsible for calling lib_va_release to * drop their reference count on it. * * lv_num_segs will be set to zero since the caller needs to add that * information to the data structure. */ static struct lib_va * lib_va_add_hash(caddr_t base_va, ssize_t len, size_t align, vattr_t *vap) { struct lib_va *lvp; uint_t index; model_t model; struct lib_va **tmp; struct lib_va *del = NULL; model = get_udatamodel(); index = LIB_VA_HASH(vap->va_nodeid); lvp = kmem_alloc(sizeof (struct lib_va), KM_SLEEP); mutex_enter(LIB_VA_HASH_MUTEX(index)); /* * Make sure not adding same data a second time. * The hash chains should be relatively short and adding * is a relatively rare event, so it's worth the check. */ tmp = &lib_va_hash[index]; while (*tmp != NULL) { if (LIB_VA_MATCH_ID(*tmp, vap)) { if (LIB_VA_MATCH_TIME(*tmp, vap)) { mutex_exit(LIB_VA_HASH_MUTEX(index)); kmem_free(lvp, sizeof (struct lib_va)); return (NULL); } /* * We have the same nodeid and fsid but the file has * been modified since we last saw it. * Need to remove the old node and add this new * one. * Could probably use a callback mechanism to make * this cleaner. */ ASSERT(del == NULL); del = *tmp; *tmp = del->lv_next; del->lv_next = NULL; /* * Check to see if we can free it. If lv_refcnt * is greater than zero, than some other thread * has a reference to the one we want to delete * and we can not delete it. All of this is done * under the lib_va_hash_mutex lock so it is atomic. */ if (del->lv_refcnt) { MOBJ_STAT_ADD(lib_va_add_delay_delete); del->lv_flags |= LV_DEL; del = NULL; } /* tmp is already advanced */ continue; } tmp = &((*tmp)->lv_next); } lvp->lv_base_va = base_va; lvp->lv_len = len; lvp->lv_align = align; lvp->lv_nodeid = vap->va_nodeid; lvp->lv_fsid = vap->va_fsid; lvp->lv_ctime.tv_sec = vap->va_ctime.tv_sec; lvp->lv_ctime.tv_nsec = vap->va_ctime.tv_nsec; lvp->lv_mtime.tv_sec = vap->va_mtime.tv_sec; lvp->lv_mtime.tv_nsec = vap->va_mtime.tv_nsec; lvp->lv_next = NULL; lvp->lv_refcnt = 1; /* Caller responsible for filling this and lv_mps out */ lvp->lv_num_segs = 0; if (model == DATAMODEL_LP64) { lvp->lv_flags = LV_ELF64; } else { ASSERT(model == DATAMODEL_ILP32); lvp->lv_flags = LV_ELF32; } if (base_va != NULL) { if (model == DATAMODEL_LP64) { atomic_inc_32(&libs_mapped_64); } else { ASSERT(model == DATAMODEL_ILP32); atomic_inc_32(&libs_mapped_32); } } ASSERT(*tmp == NULL); *tmp = lvp; mutex_exit(LIB_VA_HASH_MUTEX(index)); if (del) { ASSERT(del->lv_refcnt == 0); MOBJ_STAT_ADD(lib_va_add_delete); lib_va_free(del); } return (lvp); } /* * Release the hold on lvp which was acquired by lib_va_find or lib_va_add_hash. * In addition, if this is the last hold and lvp is marked for deletion, * free up it's reserved address space and free the structure. */ static void lib_va_release(struct lib_va *lvp) { uint_t index; int to_del = 0; ASSERT(lvp->lv_refcnt > 0); index = LIB_VA_HASH(lvp->lv_nodeid); mutex_enter(LIB_VA_HASH_MUTEX(index)); if (--lvp->lv_refcnt == 0 && (lvp->lv_flags & LV_DEL)) { to_del = 1; } mutex_exit(LIB_VA_HASH_MUTEX(index)); if (to_del) { ASSERT(lvp->lv_next == 0); lib_va_free(lvp); } } /* * Dummy function for mapping through /dev/null * Normally I would have used mmmmap in common/io/mem.c * but that is a static function, and for /dev/null, it * just returns -1. */ /* ARGSUSED */ static int mmapobj_dummy(dev_t dev, off_t off, int prot) { return (-1); } /* * Called when an error occurred which requires mmapobj to return failure. * All mapped objects will be unmapped and /dev/null mappings will be * reclaimed if necessary. * num_mapped is the number of elements of mrp which have been mapped, and * num_segs is the total number of elements in mrp. * For e_type ET_EXEC, we need to unmap all of the elements in mrp since * we had already made reservations for them. * If num_mapped equals num_segs, then we know that we had fully mapped * the file and only need to clean up the segments described. * If they are not equal, then for ET_DYN we will unmap the range from the * end of the last mapped segment to the end of the last segment in mrp * since we would have made a reservation for that memory earlier. * If e_type is passed in as zero, num_mapped must equal num_segs. */ void mmapobj_unmap(mmapobj_result_t *mrp, int num_mapped, int num_segs, ushort_t e_type) { int i; struct as *as = curproc->p_as; caddr_t addr; size_t size; if (e_type == ET_EXEC) { num_mapped = num_segs; } #ifdef DEBUG if (e_type == 0) { ASSERT(num_mapped == num_segs); } #endif MOBJ_STAT_ADD(unmap_called); for (i = 0; i < num_mapped; i++) { /* * If we are going to have to create a mapping we need to * make sure that no one else will use the address we * need to remap between the time it is unmapped and * mapped below. */ if (mrp[i].mr_flags & MR_RESV) { as_rangelock(as); } /* Always need to unmap what we mapped */ (void) as_unmap(as, mrp[i].mr_addr, mrp[i].mr_msize); /* Need to reclaim /dev/null reservation from earlier */ if (mrp[i].mr_flags & MR_RESV) { struct segdev_crargs dev_a; ASSERT(e_type != ET_DYN); /* * Use seg_dev segment driver for /dev/null mapping. */ dev_a.mapfunc = mmapobj_dummy; dev_a.dev = makedevice(mm_major, M_NULL); dev_a.offset = 0; dev_a.type = 0; /* neither PRIVATE nor SHARED */ dev_a.prot = dev_a.maxprot = (uchar_t)PROT_NONE; dev_a.hat_attr = 0; dev_a.hat_flags = 0; (void) as_map(as, mrp[i].mr_addr, mrp[i].mr_msize, segdev_create, &dev_a); MOBJ_STAT_ADD(remap_devnull); as_rangeunlock(as); } } if (num_mapped != num_segs) { ASSERT(e_type == ET_DYN); /* Need to unmap any reservation made after last mapped seg */ if (num_mapped == 0) { addr = mrp[0].mr_addr; } else { addr = mrp[num_mapped - 1].mr_addr + mrp[num_mapped - 1].mr_msize; } size = (size_t)mrp[num_segs - 1].mr_addr + mrp[num_segs - 1].mr_msize - (size_t)addr; (void) as_unmap(as, addr, size); /* * Now we need to unmap the holes between mapped segs. * Note that we have not mapped all of the segments and thus * the holes between segments would not have been unmapped * yet. If num_mapped == num_segs, then all of the holes * between segments would have already been unmapped. */ for (i = 1; i < num_mapped; i++) { addr = mrp[i - 1].mr_addr + mrp[i - 1].mr_msize; size = mrp[i].mr_addr - addr; (void) as_unmap(as, addr, size); } } } /* * We need to add the start address into mrp so that the unmap function * has absolute addresses to use. */ static void mmapobj_unmap_exec(mmapobj_result_t *mrp, int num_mapped, caddr_t start_addr) { int i; for (i = 0; i < num_mapped; i++) { mrp[i].mr_addr += (size_t)start_addr; } mmapobj_unmap(mrp, num_mapped, num_mapped, ET_EXEC); } static caddr_t mmapobj_lookup_start_addr(struct lib_va *lvp) { proc_t *p = curproc; struct as *as = p->p_as; struct segvn_crargs crargs = SEGVN_ZFOD_ARGS(PROT_USER, PROT_ALL); int error; uint_t ma_flags = _MAP_LOW32; caddr_t base = NULL; size_t len; size_t align; ASSERT(lvp != NULL); MOBJ_STAT_ADD(lookup_start); as_rangelock(as); base = lvp->lv_base_va; len = lvp->lv_len; /* * If we don't have an expected base address, or the one that we want * to use is not available or acceptable, go get an acceptable * address range. */ if (base == NULL || as_gap(as, len, &base, &len, 0, NULL) || valid_usr_range(base, len, PROT_ALL, as, as->a_userlimit) != RANGE_OKAY || OVERLAPS_STACK(base + len, p)) { if (lvp->lv_flags & LV_ELF64) { ma_flags = 0; } align = lvp->lv_align; if (align > 1) { ma_flags |= MAP_ALIGN; } base = (caddr_t)align; map_addr(&base, len, 0, 1, ma_flags); } /* * Need to reserve the address space we're going to use. * Don't reserve swap space since we'll be mapping over this. */ if (base != NULL) { crargs.flags |= MAP_NORESERVE; error = as_map(as, base, len, segvn_create, &crargs); if (error) { base = NULL; } } as_rangeunlock(as); return (base); } /* * Get the starting address for a given file to be mapped and return it * to the caller. If we're using lib_va and we need to allocate an address, * we will attempt to allocate it from the global reserved pool such that the * same address can be used in the future for this file. If we can't use the * reserved address then we just get one that will fit in our address space. * * Returns the starting virtual address for the range to be mapped or NULL * if an error is encountered. If we successfully insert the requested info * into the lib_va hash, then *lvpp will be set to point to this lib_va * structure. The structure will have a hold on it and thus lib_va_release * needs to be called on it by the caller. This function will not fill out * lv_mps or lv_num_segs since it does not have enough information to do so. * The caller is responsible for doing this making sure that any modifications * to lv_mps are visible before setting lv_num_segs. */ static caddr_t mmapobj_alloc_start_addr(struct lib_va **lvpp, size_t len, int use_lib_va, int randomize, size_t align, vattr_t *vap) { proc_t *p = curproc; struct as *as = p->p_as; struct segvn_crargs crargs = SEGVN_ZFOD_ARGS(PROT_USER, PROT_ALL); int error; model_t model; uint_t ma_flags = _MAP_LOW32; caddr_t base = NULL; vmem_t *model_vmem; size_t lib_va_start; size_t lib_va_end; size_t lib_va_len; ASSERT(lvpp != NULL); ASSERT((randomize & use_lib_va) != 1); MOBJ_STAT_ADD(alloc_start); model = get_udatamodel(); if (model == DATAMODEL_LP64) { ma_flags = 0; model_vmem = lib_va_64_arena; } else { ASSERT(model == DATAMODEL_ILP32); model_vmem = lib_va_32_arena; } if (align > 1) { ma_flags |= MAP_ALIGN; } if (randomize != 0) ma_flags |= _MAP_RANDOMIZE; if (use_lib_va) { /* * The first time through, we need to setup the lib_va arenas. * We call map_addr to find a suitable range of memory to map * the given library, and we will set the highest address * in our vmem arena to the end of this adddress range. * We allow up to half of the address space to be used * for lib_va addresses but we do not prevent any allocations * in this range from other allocation paths. */ if (lib_va_64_arena == NULL && model == DATAMODEL_LP64) { mutex_enter(&lib_va_init_mutex); if (lib_va_64_arena == NULL) { base = (caddr_t)align; as_rangelock(as); map_addr(&base, len, 0, 1, ma_flags); as_rangeunlock(as); if (base == NULL) { mutex_exit(&lib_va_init_mutex); MOBJ_STAT_ADD(lib_va_create_failure); goto nolibva; } lib_va_end = (size_t)base + len; lib_va_len = lib_va_end >> 1; lib_va_len = P2ROUNDUP(lib_va_len, PAGESIZE); lib_va_start = lib_va_end - lib_va_len; /* * Need to make sure we avoid the address hole. * We know lib_va_end is valid but we need to * make sure lib_va_start is as well. */ if ((lib_va_end > (size_t)hole_end) && (lib_va_start < (size_t)hole_end)) { lib_va_start = P2ROUNDUP( (size_t)hole_end, PAGESIZE); lib_va_len = lib_va_end - lib_va_start; } lib_va_64_arena = vmem_create("lib_va_64", (void *)lib_va_start, lib_va_len, PAGESIZE, NULL, NULL, NULL, 0, VM_NOSLEEP | VMC_IDENTIFIER); if (lib_va_64_arena == NULL) { mutex_exit(&lib_va_init_mutex); goto nolibva; } } model_vmem = lib_va_64_arena; mutex_exit(&lib_va_init_mutex); } else if (lib_va_32_arena == NULL && model == DATAMODEL_ILP32) { mutex_enter(&lib_va_init_mutex); if (lib_va_32_arena == NULL) { base = (caddr_t)align; as_rangelock(as); map_addr(&base, len, 0, 1, ma_flags); as_rangeunlock(as); if (base == NULL) { mutex_exit(&lib_va_init_mutex); MOBJ_STAT_ADD(lib_va_create_failure); goto nolibva; } lib_va_end = (size_t)base + len; lib_va_len = lib_va_end >> 1; lib_va_len = P2ROUNDUP(lib_va_len, PAGESIZE); lib_va_start = lib_va_end - lib_va_len; lib_va_32_arena = vmem_create("lib_va_32", (void *)lib_va_start, lib_va_len, PAGESIZE, NULL, NULL, NULL, 0, VM_NOSLEEP | VMC_IDENTIFIER); if (lib_va_32_arena == NULL) { mutex_exit(&lib_va_init_mutex); goto nolibva; } } model_vmem = lib_va_32_arena; mutex_exit(&lib_va_init_mutex); } if (model == DATAMODEL_LP64 || libs_mapped_32 < lib_threshold) { base = vmem_xalloc(model_vmem, len, align, 0, 0, NULL, NULL, VM_NOSLEEP | VM_ENDALLOC); MOBJ_STAT_ADD(alloc_vmem); } /* * Even if the address fails to fit in our address space, * or we can't use a reserved address, * we should still save it off in lib_va_hash. */ *lvpp = lib_va_add_hash(base, len, align, vap); /* * Check for collision on insertion and free up our VA space. * This is expected to be rare, so we'll just reset base to * NULL instead of looking it up in the lib_va hash. */ if (*lvpp == NULL) { if (base != NULL) { vmem_xfree(model_vmem, base, len); base = NULL; MOBJ_STAT_ADD(add_collision); } } } nolibva: as_rangelock(as); /* * If we don't have an expected base address, or the one that we want * to use is not available or acceptable, go get an acceptable * address range. * * If ASLR is enabled, we should never have used the cache, and should * also start our real work here, in the consequent of the next * condition. */ if (randomize != 0) ASSERT(base == NULL); if (base == NULL || as_gap(as, len, &base, &len, 0, NULL) || valid_usr_range(base, len, PROT_ALL, as, as->a_userlimit) != RANGE_OKAY || OVERLAPS_STACK(base + len, p)) { MOBJ_STAT_ADD(get_addr); base = (caddr_t)align; map_addr(&base, len, 0, 1, ma_flags); } /* * Need to reserve the address space we're going to use. * Don't reserve swap space since we'll be mapping over this. */ if (base != NULL) { /* Don't reserve swap space since we'll be mapping over this */ crargs.flags |= MAP_NORESERVE; error = as_map(as, base, len, segvn_create, &crargs); if (error) { base = NULL; } } as_rangeunlock(as); return (base); } /* * Map the file associated with vp into the address space as a single * read only private mapping. * Returns 0 for success, and non-zero for failure to map the file. */ static int mmapobj_map_flat(vnode_t *vp, mmapobj_result_t *mrp, size_t padding, cred_t *fcred) { int error = 0; struct as *as = curproc->p_as; caddr_t addr = NULL; caddr_t start_addr; size_t len; size_t pad_len; int prot = PROT_USER | PROT_READ; uint_t ma_flags = _MAP_LOW32; vattr_t vattr; struct segvn_crargs crargs = SEGVN_ZFOD_ARGS(PROT_USER, PROT_ALL); if (get_udatamodel() == DATAMODEL_LP64) { ma_flags = 0; } vattr.va_mask = AT_SIZE; error = VOP_GETATTR(vp, &vattr, 0, fcred, NULL); if (error) { return (error); } len = vattr.va_size; ma_flags |= MAP_PRIVATE; if (padding == 0) { MOBJ_STAT_ADD(map_flat_no_padding); error = VOP_MAP(vp, 0, as, &addr, len, prot, PROT_ALL, ma_flags, fcred, NULL); if (error == 0) { mrp[0].mr_addr = addr; mrp[0].mr_msize = len; mrp[0].mr_fsize = len; mrp[0].mr_offset = 0; mrp[0].mr_prot = prot; mrp[0].mr_flags = 0; } return (error); } /* padding was requested so there's more work to be done */ MOBJ_STAT_ADD(map_flat_padding); /* No need to reserve swap space now since it will be reserved later */ crargs.flags |= MAP_NORESERVE; /* Need to setup padding which can only be in PAGESIZE increments. */ ASSERT((padding & PAGEOFFSET) == 0); pad_len = len + (2 * padding); as_rangelock(as); map_addr(&addr, pad_len, 0, 1, ma_flags); error = as_map(as, addr, pad_len, segvn_create, &crargs); as_rangeunlock(as); if (error) { return (error); } start_addr = addr; addr += padding; ma_flags |= MAP_FIXED; error = VOP_MAP(vp, 0, as, &addr, len, prot, PROT_ALL, ma_flags, fcred, NULL); if (error == 0) { mrp[0].mr_addr = start_addr; mrp[0].mr_msize = padding; mrp[0].mr_fsize = 0; mrp[0].mr_offset = 0; mrp[0].mr_prot = 0; mrp[0].mr_flags = MR_PADDING; mrp[1].mr_addr = addr; mrp[1].mr_msize = len; mrp[1].mr_fsize = len; mrp[1].mr_offset = 0; mrp[1].mr_prot = prot; mrp[1].mr_flags = 0; mrp[2].mr_addr = addr + P2ROUNDUP(len, PAGESIZE); mrp[2].mr_msize = padding; mrp[2].mr_fsize = 0; mrp[2].mr_offset = 0; mrp[2].mr_prot = 0; mrp[2].mr_flags = MR_PADDING; } else { /* Need to cleanup the as_map from earlier */ (void) as_unmap(as, start_addr, pad_len); } return (error); } /* * Map a PT_LOAD or PT_SUNWBSS section of an executable file into the user's * address space. * vp - vnode to be mapped in * addr - start address * len - length of vp to be mapped * zfodlen - length of zero filled memory after len above * offset - offset into file where mapping should start * prot - protections for this mapping * fcred - credentials for the file associated with vp at open time. */ static int mmapobj_map_ptload(struct vnode *vp, caddr_t addr, size_t len, size_t zfodlen, off_t offset, int prot, cred_t *fcred) { int error = 0; caddr_t zfodbase, oldaddr; size_t oldlen; size_t end; size_t zfoddiff; label_t ljb; struct as *as = curproc->p_as; model_t model; int full_page; /* * See if addr and offset are aligned such that we can map in * full pages instead of partial pages. */ full_page = (((uintptr_t)addr & PAGEOFFSET) == ((uintptr_t)offset & PAGEOFFSET)); model = get_udatamodel(); oldaddr = addr; addr = (caddr_t)((uintptr_t)addr & (uintptr_t)PAGEMASK); if (len) { spgcnt_t availm, npages; int preread; uint_t mflag = MAP_PRIVATE | MAP_FIXED; if (model == DATAMODEL_ILP32) { mflag |= _MAP_LOW32; } /* We may need to map in extra bytes */ oldlen = len; len += ((size_t)oldaddr & PAGEOFFSET); if (full_page) { offset = (off_t)((uintptr_t)offset & PAGEMASK); if ((prot & (PROT_WRITE | PROT_EXEC)) == PROT_EXEC) { mflag |= MAP_TEXT; MOBJ_STAT_ADD(map_ptload_text); } else { mflag |= MAP_INITDATA; MOBJ_STAT_ADD(map_ptload_initdata); } /* * maxprot is passed as PROT_ALL so that mdb can * write to this segment. */ if (error = VOP_MAP(vp, (offset_t)offset, as, &addr, len, prot, PROT_ALL, mflag, fcred, NULL)) { return (error); } /* * If the segment can fit and is relatively small, then * we prefault the entire segment in. This is based * on the model that says the best working set of a * small program is all of its pages. * We only do this if freemem will not drop below * lotsfree since we don't want to induce paging. */ npages = (spgcnt_t)btopr(len); availm = freemem - lotsfree; preread = (npages < availm && len < PGTHRESH) ? 1 : 0; /* * If we aren't prefaulting the segment, * increment "deficit", if necessary to ensure * that pages will become available when this * process starts executing. */ if (preread == 0 && npages > availm && deficit < lotsfree) { deficit += MIN((pgcnt_t)(npages - availm), lotsfree - deficit); } if (preread) { (void) as_faulta(as, addr, len); MOBJ_STAT_ADD(map_ptload_preread); } } else { /* * addr and offset were not aligned such that we could * use VOP_MAP, thus we need to as_map the memory we * need and then read the data in from disk. * This code path is a corner case which should never * be taken, but hand crafted binaries could trigger * this logic and it needs to work correctly. */ MOBJ_STAT_ADD(map_ptload_unaligned_text); as_rangelock(as); (void) as_unmap(as, addr, len); /* * We use zfod_argsp because we need to be able to * write to the mapping and then we'll change the * protections later if they are incorrect. */ error = as_map(as, addr, len, segvn_create, zfod_argsp); as_rangeunlock(as); if (error) { MOBJ_STAT_ADD(map_ptload_unaligned_map_fail); return (error); } /* Now read in the data from disk */ error = vn_rdwr(UIO_READ, vp, oldaddr, oldlen, offset, UIO_USERSPACE, 0, (rlim64_t)0, fcred, NULL); if (error) { MOBJ_STAT_ADD(map_ptload_unaligned_read_fail); return (error); } /* * Now set protections. */ if (prot != PROT_ZFOD) { (void) as_setprot(as, addr, len, prot); } } } if (zfodlen) { end = (size_t)addr + len; zfodbase = (caddr_t)P2ROUNDUP(end, PAGESIZE); zfoddiff = (uintptr_t)zfodbase - end; if (zfoddiff) { /* * Before we go to zero the remaining space on the last * page, make sure we have write permission. * * We need to be careful how we zero-fill the last page * if the protection does not include PROT_WRITE. Using * as_setprot() can cause the VM segment code to call * segvn_vpage(), which must allocate a page struct for * each page in the segment. If we have a very large * segment, this may fail, so we check for that, even * though we ignore other return values from as_setprot. */ MOBJ_STAT_ADD(zfoddiff); if ((prot & PROT_WRITE) == 0) { if (as_setprot(as, (caddr_t)end, zfoddiff, prot | PROT_WRITE) == ENOMEM) return (ENOMEM); MOBJ_STAT_ADD(zfoddiff_nowrite); } if (on_fault(&ljb)) { no_fault(); if ((prot & PROT_WRITE) == 0) { (void) as_setprot(as, (caddr_t)end, zfoddiff, prot); } return (EFAULT); } uzero((void *)end, zfoddiff); no_fault(); /* * Remove write protection to return to original state */ if ((prot & PROT_WRITE) == 0) { (void) as_setprot(as, (caddr_t)end, zfoddiff, prot); } } if (zfodlen > zfoddiff) { struct segvn_crargs crargs = SEGVN_ZFOD_ARGS(prot, PROT_ALL); MOBJ_STAT_ADD(zfodextra); zfodlen -= zfoddiff; crargs.szc = AS_MAP_NO_LPOOB; as_rangelock(as); (void) as_unmap(as, (caddr_t)zfodbase, zfodlen); error = as_map(as, (caddr_t)zfodbase, zfodlen, segvn_create, &crargs); as_rangeunlock(as); if (error) { return (error); } } } return (0); } /* * Map the ELF file represented by vp into the users address space. The * first mapping will start at start_addr and there will be num_elements * mappings. The mappings are described by the data in mrp which may be * modified upon returning from this function. * Returns 0 for success or errno for failure. */ static int mmapobj_map_elf(struct vnode *vp, caddr_t start_addr, mmapobj_result_t *mrp, int num_elements, cred_t *fcred, ushort_t e_type) { int i; int ret; caddr_t lo; caddr_t hi; struct as *as = curproc->p_as; for (i = 0; i < num_elements; i++) { caddr_t addr; size_t p_memsz; size_t p_filesz; size_t zfodlen; offset_t p_offset; size_t dif; int prot; /* Always need to adjust mr_addr */ addr = start_addr + (size_t)(mrp[i].mr_addr); mrp[i].mr_addr = (caddr_t)((uintptr_t)addr & (uintptr_t)PAGEMASK); /* Padding has already been mapped */ if (MR_GET_TYPE(mrp[i].mr_flags) == MR_PADDING) { continue; } /* Can't execute code from "noexec" mounted filesystem. */ if (((vp->v_vfsp->vfs_flag & VFS_NOEXEC) != 0) && ((mrp[i].mr_prot & PROT_EXEC) != 0)) { MOBJ_STAT_ADD(noexec_fs); return (EACCES); } p_memsz = mrp[i].mr_msize; p_filesz = mrp[i].mr_fsize; zfodlen = p_memsz - p_filesz; p_offset = mrp[i].mr_offset; dif = (uintptr_t)(addr) & PAGEOFFSET; prot = mrp[i].mr_prot | PROT_USER; ret = mmapobj_map_ptload(vp, addr, p_filesz, zfodlen, p_offset, prot, fcred); if (ret != 0) { MOBJ_STAT_ADD(ptload_failed); mmapobj_unmap(mrp, i, num_elements, e_type); return (ret); } /* Need to cleanup mrp to reflect the actual values used */ mrp[i].mr_msize += dif; mrp[i].mr_offset = (size_t)addr & PAGEOFFSET; } /* Also need to unmap any holes created above */ if (num_elements == 1) { MOBJ_STAT_ADD(map_elf_no_holes); return (0); } if (e_type == ET_EXEC) { return (0); } as_rangelock(as); lo = start_addr; hi = mrp[0].mr_addr; /* Remove holes made by the rest of the segments */ for (i = 0; i < num_elements - 1; i++) { lo = (caddr_t)P2ROUNDUP((size_t)(mrp[i].mr_addr) + mrp[i].mr_msize, PAGESIZE); hi = mrp[i + 1].mr_addr; if (lo < hi) { /* * If as_unmap fails we just use up a bit of extra * space */ (void) as_unmap(as, (caddr_t)lo, (size_t)hi - (size_t)lo); MOBJ_STAT_ADD(unmap_hole); } } as_rangeunlock(as); return (0); } /* Ugly hack to get STRUCT_* macros to work below */ struct myphdr { Phdr x; /* native version */ }; struct myphdr32 { Elf32_Phdr x; }; /* * Calculate and return the number of loadable segments in the ELF Phdr * represented by phdrbase as well as the len of the total mapping and * the max alignment that is needed for a given segment. On success, * 0 is returned, and *len, *loadable and *align have been filled out. * On failure, errno will be returned, which in this case is ENOTSUP * if we were passed an ELF file with overlapping segments. */ static int calc_loadable(Ehdr *ehdrp, caddr_t phdrbase, int nphdrs, size_t *len, int *loadable, size_t *align) { int i; int hsize; model_t model; ushort_t e_type = ehdrp->e_type; /* same offset 32 and 64 bit */ uint_t p_type; offset_t p_offset; size_t p_memsz; size_t p_align; caddr_t vaddr; int num_segs = 0; caddr_t start_addr = NULL; caddr_t p_end = NULL; size_t max_align = 0; size_t min_align = PAGESIZE; /* needed for vmem_xalloc */ STRUCT_HANDLE(myphdr, mph); #if defined(__sparc) extern int vac_size; /* * Want to prevent aliasing by making the start address at least be * aligned to vac_size. */ min_align = MAX(PAGESIZE, vac_size); #endif model = get_udatamodel(); STRUCT_SET_HANDLE(mph, model, (struct myphdr *)phdrbase); /* hsize alignment should have been checked before calling this func */ if (model == DATAMODEL_LP64) { hsize = ehdrp->e_phentsize; if (hsize & 7) { return (ENOTSUP); } } else { ASSERT(model == DATAMODEL_ILP32); hsize = ((Elf32_Ehdr *)ehdrp)->e_phentsize; if (hsize & 3) { return (ENOTSUP); } } /* * Determine the span of all loadable segments and calculate the * number of loadable segments. */ for (i = 0; i < nphdrs; i++) { p_type = STRUCT_FGET(mph, x.p_type); if (p_type == PT_LOAD || p_type == PT_SUNWBSS) { vaddr = (caddr_t)(uintptr_t)STRUCT_FGET(mph, x.p_vaddr); p_memsz = STRUCT_FGET(mph, x.p_memsz); /* * Skip this header if it requests no memory to be * mapped. */ if (p_memsz == 0) { STRUCT_SET_HANDLE(mph, model, (struct myphdr *)((size_t)STRUCT_BUF(mph) + hsize)); MOBJ_STAT_ADD(nomem_header); continue; } if (num_segs++ == 0) { /* * The p_vaddr of the first PT_LOAD segment * must either be NULL or within the first * page in order to be interpreted. * Otherwise, its an invalid file. */ if (e_type == ET_DYN && ((caddr_t)((uintptr_t)vaddr & (uintptr_t)PAGEMASK) != NULL)) { MOBJ_STAT_ADD(inval_header); return (ENOTSUP); } start_addr = vaddr; /* * For the first segment, we need to map from * the beginning of the file, so we will * adjust the size of the mapping to include * this memory. */ p_offset = STRUCT_FGET(mph, x.p_offset); } else { p_offset = 0; } /* * Check to make sure that this mapping wouldn't * overlap a previous mapping. */ if (vaddr < p_end) { MOBJ_STAT_ADD(overlap_header); return (ENOTSUP); } p_end = vaddr + p_memsz + p_offset; p_end = (caddr_t)P2ROUNDUP((size_t)p_end, PAGESIZE); p_align = STRUCT_FGET(mph, x.p_align); if (p_align > 1 && p_align > max_align) { max_align = p_align; if (max_align < min_align) { max_align = min_align; MOBJ_STAT_ADD(min_align); } } } STRUCT_SET_HANDLE(mph, model, (struct myphdr *)((size_t)STRUCT_BUF(mph) + hsize)); } /* * The alignment should be a power of 2, if it isn't we forgive it * and round up. On overflow, we'll set the alignment to max_align * rounded down to the nearest power of 2. */ if (max_align > 0 && !ISP2(max_align)) { MOBJ_STAT_ADD(np2_align); *align = 2 * (1L << (highbit(max_align) - 1)); if (*align < max_align || (*align > UINT_MAX && model == DATAMODEL_ILP32)) { MOBJ_STAT_ADD(np2_align_overflow); *align = 1L << (highbit(max_align) - 1); } } else { *align = max_align; } ASSERT(*align >= PAGESIZE || *align == 0); *loadable = num_segs; *len = p_end - start_addr; return (0); } /* * Check the address space to see if the virtual addresses to be used are * available. If they are not, return errno for failure. On success, 0 * will be returned, and the virtual addresses for each mmapobj_result_t * will be reserved. Note that a reservation could have earlier been made * for a given segment via a /dev/null mapping. If that is the case, then * we can use that VA space for our mappings. * Note: this function will only be used for ET_EXEC binaries. */ int check_exec_addrs(int loadable, mmapobj_result_t *mrp, caddr_t start_addr) { int i; struct as *as = curproc->p_as; struct segvn_crargs crargs = SEGVN_ZFOD_ARGS(PROT_ZFOD, PROT_ALL); int ret; caddr_t myaddr; size_t mylen; struct seg *seg; /* No need to reserve swap space now since it will be reserved later */ crargs.flags |= MAP_NORESERVE; as_rangelock(as); for (i = 0; i < loadable; i++) { myaddr = start_addr + (size_t)mrp[i].mr_addr; mylen = mrp[i].mr_msize; /* See if there is a hole in the as for this range */ if (as_gap(as, mylen, &myaddr, &mylen, 0, NULL) == 0) { ASSERT(myaddr == start_addr + (size_t)mrp[i].mr_addr); ASSERT(mylen == mrp[i].mr_msize); #ifdef DEBUG if (MR_GET_TYPE(mrp[i].mr_flags) == MR_PADDING) { MOBJ_STAT_ADD(exec_padding); } #endif ret = as_map(as, myaddr, mylen, segvn_create, &crargs); if (ret) { as_rangeunlock(as); mmapobj_unmap_exec(mrp, i, start_addr); return (ret); } } else { /* * There is a mapping that exists in the range * so check to see if it was a "reservation" * from /dev/null. The mapping is from * /dev/null if the mapping comes from * segdev and the type is neither MAP_SHARED * nor MAP_PRIVATE. */ AS_LOCK_ENTER(as, RW_READER); seg = as_findseg(as, myaddr, 0); MOBJ_STAT_ADD(exec_addr_mapped); if (seg && seg->s_ops == &segdev_ops && ((SEGOP_GETTYPE(seg, myaddr) & (MAP_SHARED | MAP_PRIVATE)) == 0) && myaddr >= seg->s_base && myaddr + mylen <= seg->s_base + seg->s_size) { MOBJ_STAT_ADD(exec_addr_devnull); AS_LOCK_EXIT(as); (void) as_unmap(as, myaddr, mylen); ret = as_map(as, myaddr, mylen, segvn_create, &crargs); mrp[i].mr_flags |= MR_RESV; if (ret) { as_rangeunlock(as); /* Need to remap what we unmapped */ mmapobj_unmap_exec(mrp, i + 1, start_addr); return (ret); } } else { AS_LOCK_EXIT(as); as_rangeunlock(as); mmapobj_unmap_exec(mrp, i, start_addr); MOBJ_STAT_ADD(exec_addr_in_use); return (EADDRINUSE); } } } as_rangeunlock(as); return (0); } /* * Walk through the ELF program headers and extract all useful information * for PT_LOAD and PT_SUNWBSS segments into mrp. * Return 0 on success or error on failure. */ static int process_phdrs(Ehdr *ehdrp, caddr_t phdrbase, int nphdrs, mmapobj_result_t *mrp, vnode_t *vp, uint_t *num_mapped, size_t padding, cred_t *fcred) { int i; caddr_t start_addr = NULL; caddr_t vaddr; size_t len = 0; size_t lib_len = 0; int ret; int prot; struct lib_va *lvp = NULL; vattr_t vattr; struct as *as = curproc->p_as; int error; int loadable = 0; int current = 0; int use_lib_va = 1; size_t align = 0; size_t add_pad = 0; int hdr_seen = 0; ushort_t e_type = ehdrp->e_type; /* same offset 32 and 64 bit */ uint_t p_type; offset_t p_offset; size_t p_memsz; size_t p_filesz; uint_t p_flags; int hsize; model_t model; STRUCT_HANDLE(myphdr, mph); model = get_udatamodel(); STRUCT_SET_HANDLE(mph, model, (struct myphdr *)phdrbase); /* * Need to make sure that hsize is aligned properly. * For 32bit processes, 4 byte alignment is required. * For 64bit processes, 8 byte alignment is required. * If the alignment isn't correct, we need to return failure * since it could cause an alignment error panic while walking * the phdr array. */ if (model == DATAMODEL_LP64) { hsize = ehdrp->e_phentsize; if (hsize & 7) { MOBJ_STAT_ADD(phent_align64); return (ENOTSUP); } } else { ASSERT(model == DATAMODEL_ILP32); hsize = ((Elf32_Ehdr *)ehdrp)->e_phentsize; if (hsize & 3) { MOBJ_STAT_ADD(phent_align32); return (ENOTSUP); } } if ((padding != 0) || secflag_enabled(curproc, PROC_SEC_ASLR)) { use_lib_va = 0; } if (e_type == ET_DYN) { vattr.va_mask = AT_FSID | AT_NODEID | AT_CTIME | AT_MTIME; error = VOP_GETATTR(vp, &vattr, 0, fcred, NULL); if (error) { return (error); } /* Check to see if we already have a description for this lib */ if (!secflag_enabled(curproc, PROC_SEC_ASLR)) lvp = lib_va_find(&vattr); if (lvp != NULL) { MOBJ_STAT_ADD(lvp_found); if (use_lib_va) { start_addr = mmapobj_lookup_start_addr(lvp); if (start_addr == NULL) { lib_va_release(lvp); return (ENOMEM); } } /* * loadable may be zero if the original allocator * of lvp hasn't finished setting it up but the rest * of the fields will be accurate. */ loadable = lvp->lv_num_segs; len = lvp->lv_len; align = lvp->lv_align; } } /* * Determine the span of all loadable segments and calculate the * number of loadable segments, the total len spanned by the mappings * and the max alignment, if we didn't get them above. */ if (loadable == 0) { MOBJ_STAT_ADD(no_loadable_yet); ret = calc_loadable(ehdrp, phdrbase, nphdrs, &len, &loadable, &align); if (ret != 0) { /* * Since it'd be an invalid file, we shouldn't have * cached it previously. */ ASSERT(lvp == NULL); return (ret); } #ifdef DEBUG if (lvp) { ASSERT(len == lvp->lv_len); ASSERT(align == lvp->lv_align); } #endif } /* Make sure there's something to map. */ if (len == 0 || loadable == 0) { /* * Since it'd be an invalid file, we shouldn't have * cached it previously. */ ASSERT(lvp == NULL); MOBJ_STAT_ADD(nothing_to_map); return (ENOTSUP); } lib_len = len; if (padding != 0) { loadable += 2; } if (loadable > *num_mapped) { *num_mapped = loadable; /* cleanup previous reservation */ if (start_addr) { (void) as_unmap(as, start_addr, lib_len); } MOBJ_STAT_ADD(e2big); if (lvp) { lib_va_release(lvp); } return (E2BIG); } /* * We now know the size of the object to map and now we need to * get the start address to map it at. It's possible we already * have it if we found all the info we need in the lib_va cache. */ if (e_type == ET_DYN && start_addr == NULL) { /* * Need to make sure padding does not throw off * required alignment. We can only specify an * alignment for the starting address to be mapped, * so we round padding up to the alignment and map * from there and then throw out the extra later. */ if (padding != 0) { if (align > 1) { add_pad = P2ROUNDUP(padding, align); len += add_pad; MOBJ_STAT_ADD(dyn_pad_align); } else { MOBJ_STAT_ADD(dyn_pad_noalign); len += padding; /* at beginning */ } len += padding; /* at end of mapping */ } /* * At this point, if lvp is non-NULL, then above we * already found it in the cache but did not get * the start address since we were not going to use lib_va. * Since we know that lib_va will not be used, it's safe * to call mmapobj_alloc_start_addr and know that lvp * will not be modified. */ ASSERT(lvp ? use_lib_va == 0 : 1); start_addr = mmapobj_alloc_start_addr(&lvp, len, use_lib_va, secflag_enabled(curproc, PROC_SEC_ASLR), align, &vattr); if (start_addr == NULL) { if (lvp) { lib_va_release(lvp); } MOBJ_STAT_ADD(alloc_start_fail); return (ENOMEM); } /* * If we can't cache it, no need to hang on to it. * Setting lv_num_segs to non-zero will make that * field active and since there are too many segments * to cache, all future users will not try to use lv_mps. */ if (lvp != NULL && loadable > LIBVA_CACHED_SEGS && use_lib_va) { lvp->lv_num_segs = loadable; lib_va_release(lvp); lvp = NULL; MOBJ_STAT_ADD(lvp_nocache); } /* * Free the beginning of the mapping if the padding * was not aligned correctly. */ if (padding != 0 && add_pad != padding) { (void) as_unmap(as, start_addr, add_pad - padding); start_addr += (add_pad - padding); MOBJ_STAT_ADD(extra_padding); } } /* * At this point, we have reserved the virtual address space * for our mappings. Now we need to start filling out the mrp * array to describe all of the individual mappings we are going * to return. * For ET_EXEC there has been no memory reservation since we are * using fixed addresses. While filling in the mrp array below, * we will have the first segment biased to start at addr 0 * and the rest will be biased by this same amount. Thus if there * is padding, the first padding will start at addr 0, and the next * segment will start at the value of padding. */ /* We'll fill out padding later, so start filling in mrp at index 1 */ if (padding != 0) { current = 1; } /* If we have no more need for lvp let it go now */ if (lvp != NULL && use_lib_va == 0) { lib_va_release(lvp); MOBJ_STAT_ADD(lvp_not_needed); lvp = NULL; } /* Now fill out the mrp structs from the program headers */ STRUCT_SET_HANDLE(mph, model, (struct myphdr *)phdrbase); for (i = 0; i < nphdrs; i++) { p_type = STRUCT_FGET(mph, x.p_type); if (p_type == PT_LOAD || p_type == PT_SUNWBSS) { vaddr = (caddr_t)(uintptr_t)STRUCT_FGET(mph, x.p_vaddr); p_memsz = STRUCT_FGET(mph, x.p_memsz); p_filesz = STRUCT_FGET(mph, x.p_filesz); p_offset = STRUCT_FGET(mph, x.p_offset); p_flags = STRUCT_FGET(mph, x.p_flags); /* * Skip this header if it requests no memory to be * mapped. */ if (p_memsz == 0) { STRUCT_SET_HANDLE(mph, model, (struct myphdr *)((size_t)STRUCT_BUF(mph) + hsize)); MOBJ_STAT_ADD(no_mem_map_sz); continue; } prot = 0; if (p_flags & PF_R) prot |= PROT_READ; if (p_flags & PF_W) prot |= PROT_WRITE; if (p_flags & PF_X) prot |= PROT_EXEC; ASSERT(current < loadable); mrp[current].mr_msize = p_memsz; mrp[current].mr_fsize = p_filesz; mrp[current].mr_offset = p_offset; mrp[current].mr_prot = prot; if (hdr_seen == 0 && p_filesz != 0) { mrp[current].mr_flags = MR_HDR_ELF; /* * We modify mr_offset because we * need to map the ELF header as well, and if * we didn't then the header could be left out * of the mapping that we will create later. * Since we're removing the offset, we need to * account for that in the other fields as well * since we will be mapping the memory from 0 * to p_offset. */ if (e_type == ET_DYN) { mrp[current].mr_offset = 0; mrp[current].mr_msize += p_offset; mrp[current].mr_fsize += p_offset; } else { ASSERT(e_type == ET_EXEC); /* * Save off the start addr which will be * our bias for the rest of the * ET_EXEC mappings. */ start_addr = vaddr - padding; } mrp[current].mr_addr = (caddr_t)padding; hdr_seen = 1; } else { if (e_type == ET_EXEC) { /* bias mr_addr */ mrp[current].mr_addr = vaddr - (size_t)start_addr; } else { mrp[current].mr_addr = vaddr + padding; } mrp[current].mr_flags = 0; } current++; } /* Move to next phdr */ STRUCT_SET_HANDLE(mph, model, (struct myphdr *)((size_t)STRUCT_BUF(mph) + hsize)); } /* Now fill out the padding segments */ if (padding != 0) { mrp[0].mr_addr = NULL; mrp[0].mr_msize = padding; mrp[0].mr_fsize = 0; mrp[0].mr_offset = 0; mrp[0].mr_prot = 0; mrp[0].mr_flags = MR_PADDING; /* Setup padding for the last segment */ ASSERT(current == loadable - 1); mrp[current].mr_addr = (caddr_t)lib_len + padding; mrp[current].mr_msize = padding; mrp[current].mr_fsize = 0; mrp[current].mr_offset = 0; mrp[current].mr_prot = 0; mrp[current].mr_flags = MR_PADDING; } /* * Need to make sure address ranges desired are not in use or * are previously allocated reservations from /dev/null. For * ET_DYN, we already made sure our address range was free. */ if (e_type == ET_EXEC) { ret = check_exec_addrs(loadable, mrp, start_addr); if (ret != 0) { ASSERT(lvp == NULL); MOBJ_STAT_ADD(check_exec_failed); return (ret); } } /* Finish up our business with lvp. */ if (lvp) { ASSERT(e_type == ET_DYN); if (lvp->lv_num_segs == 0 && loadable <= LIBVA_CACHED_SEGS) { bcopy(mrp, lvp->lv_mps, loadable * sizeof (mmapobj_result_t)); membar_producer(); } /* * Setting lv_num_segs to a non-zero value indicates that * lv_mps is now valid and can be used by other threads. * So, the above stores need to finish before lv_num_segs * is updated. lv_mps is only valid if lv_num_segs is * greater than LIBVA_CACHED_SEGS. */ lvp->lv_num_segs = loadable; lib_va_release(lvp); MOBJ_STAT_ADD(lvp_used); } /* Now that we have mrp completely filled out go map it */ ret = mmapobj_map_elf(vp, start_addr, mrp, loadable, fcred, e_type); if (ret == 0) { *num_mapped = loadable; } return (ret); } /* * Take the ELF file passed in, and do the work of mapping it. * num_mapped in - # elements in user buffer * num_mapped out - # sections mapped and length of mrp array if * no errors. */ static int doelfwork(Ehdr *ehdrp, vnode_t *vp, mmapobj_result_t *mrp, uint_t *num_mapped, size_t padding, cred_t *fcred) { int error; offset_t phoff; int nphdrs; unsigned char ei_class; unsigned short phentsize; ssize_t phsizep; caddr_t phbasep; int to_map; model_t model; ei_class = ehdrp->e_ident[EI_CLASS]; model = get_udatamodel(); if ((model == DATAMODEL_ILP32 && ei_class == ELFCLASS64) || (model == DATAMODEL_LP64 && ei_class == ELFCLASS32)) { MOBJ_STAT_ADD(wrong_model); return (ENOTSUP); } /* Can't execute code from "noexec" mounted filesystem. */ if (ehdrp->e_type == ET_EXEC && (vp->v_vfsp->vfs_flag & VFS_NOEXEC) != 0) { MOBJ_STAT_ADD(noexec_fs); return (EACCES); } /* * Relocatable and core files are mapped as a single flat file * since no interpretation is done on them by mmapobj. */ if (ehdrp->e_type == ET_REL || ehdrp->e_type == ET_CORE) { to_map = padding ? 3 : 1; if (*num_mapped < to_map) { *num_mapped = to_map; MOBJ_STAT_ADD(e2big_et_rel); return (E2BIG); } error = mmapobj_map_flat(vp, mrp, padding, fcred); if (error == 0) { *num_mapped = to_map; mrp[padding ? 1 : 0].mr_flags = MR_HDR_ELF; MOBJ_STAT_ADD(et_rel_mapped); } return (error); } /* Check for an unknown ELF type */ if (ehdrp->e_type != ET_EXEC && ehdrp->e_type != ET_DYN) { MOBJ_STAT_ADD(unknown_elf_type); return (ENOTSUP); } if (ei_class == ELFCLASS32) { Elf32_Ehdr *e32hdr = (Elf32_Ehdr *)ehdrp; ASSERT(model == DATAMODEL_ILP32); nphdrs = e32hdr->e_phnum; phentsize = e32hdr->e_phentsize; if (phentsize < sizeof (Elf32_Phdr)) { MOBJ_STAT_ADD(phent32_too_small); return (ENOTSUP); } phoff = e32hdr->e_phoff; } else if (ei_class == ELFCLASS64) { Elf64_Ehdr *e64hdr = (Elf64_Ehdr *)ehdrp; ASSERT(model == DATAMODEL_LP64); nphdrs = e64hdr->e_phnum; phentsize = e64hdr->e_phentsize; if (phentsize < sizeof (Elf64_Phdr)) { MOBJ_STAT_ADD(phent64_too_small); return (ENOTSUP); } phoff = e64hdr->e_phoff; } else { /* fallthrough case for an invalid ELF class */ MOBJ_STAT_ADD(inval_elf_class); return (ENOTSUP); } /* * nphdrs should only have this value for core files which are handled * above as a single mapping. If other file types ever use this * sentinel, then we'll add the support needed to handle this here. */ if (nphdrs == PN_XNUM) { MOBJ_STAT_ADD(too_many_phdrs); return (ENOTSUP); } phsizep = nphdrs * phentsize; if (phsizep == 0) { MOBJ_STAT_ADD(no_phsize); return (ENOTSUP); } /* Make sure we only wait for memory if it's a reasonable request */ if (phsizep > mmapobj_alloc_threshold) { MOBJ_STAT_ADD(phsize_large); if ((phbasep = kmem_alloc(phsizep, KM_NOSLEEP)) == NULL) { MOBJ_STAT_ADD(phsize_xtralarge); return (ENOMEM); } } else { phbasep = kmem_alloc(phsizep, KM_SLEEP); } if ((error = vn_rdwr(UIO_READ, vp, phbasep, phsizep, (offset_t)phoff, UIO_SYSSPACE, 0, (rlim64_t)0, fcred, NULL)) != 0) { kmem_free(phbasep, phsizep); return (error); } /* Now process the phdr's */ error = process_phdrs(ehdrp, phbasep, nphdrs, mrp, vp, num_mapped, padding, fcred); kmem_free(phbasep, phsizep); return (error); } #if defined(__sparc) /* * Hack to support 64 bit kernels running AOUT 4.x programs. * This is the sizeof (struct nlist) for a 32 bit kernel. * Since AOUT programs are 32 bit only, they will never use the 64 bit * sizeof (struct nlist) and thus creating a #define is the simplest * way around this since this is a format which is not being updated. * This will be used in the place of sizeof (struct nlist) below. */ #define NLIST_SIZE (0xC) static int doaoutwork(vnode_t *vp, mmapobj_result_t *mrp, uint_t *num_mapped, struct exec *hdr, cred_t *fcred) { int error; size_t size; size_t osize; size_t nsize; /* nlist size */ size_t msize; size_t zfoddiff; caddr_t addr; caddr_t start_addr; struct as *as = curproc->p_as; int prot = PROT_USER | PROT_READ | PROT_EXEC; uint_t mflag = MAP_PRIVATE | _MAP_LOW32; offset_t off = 0; int segnum = 0; uint_t to_map; int is_library = 0; struct segvn_crargs crargs = SEGVN_ZFOD_ARGS(PROT_ZFOD, PROT_ALL); /* Only 32bit apps supported by this file format */ if (get_udatamodel() != DATAMODEL_ILP32) { MOBJ_STAT_ADD(aout_64bit_try); return (ENOTSUP); } /* Check to see if this is a library */ if (hdr->a_magic == ZMAGIC && hdr->a_entry < PAGESIZE) { is_library = 1; } /* * Can't execute code from "noexec" mounted filesystem. Unlike ELF, * aout libraries are always mapped with something PROT_EXEC, so this * doesn't need to be checked for specific parts */ if ((vp->v_vfsp->vfs_flag & VFS_NOEXEC) != 0) { MOBJ_STAT_ADD(aout_noexec); return (EACCES); } /* * There are 2 ways to calculate the mapped size of executable: * 1) rounded text size + data size + bss size. * 2) starting offset for text + text size + data size + text relocation * size + data relocation size + room for nlist data structure. * * The larger of the two sizes will be used to map this binary. */ osize = P2ROUNDUP(hdr->a_text, PAGESIZE) + hdr->a_data + hdr->a_bss; off = hdr->a_magic == ZMAGIC ? 0 : sizeof (struct exec); nsize = off + hdr->a_text + hdr->a_data + hdr->a_trsize + hdr->a_drsize + NLIST_SIZE; size = MAX(osize, nsize); if (size != nsize) { nsize = 0; } /* * 1 seg for text and 1 seg for initialized data. * 1 seg for bss (if can't fit in leftover space of init data) * 1 seg for nlist if needed. */ to_map = 2 + (nsize ? 1 : 0) + (hdr->a_bss > PAGESIZE - P2PHASE(hdr->a_data, PAGESIZE) ? 1 : 0); if (*num_mapped < to_map) { *num_mapped = to_map; MOBJ_STAT_ADD(aout_e2big); return (E2BIG); } /* Reserve address space for the whole mapping */ if (is_library) { /* We'll let VOP_MAP below pick our address for us */ addr = NULL; MOBJ_STAT_ADD(aout_lib); } else { /* * default start address for fixed binaries from AOUT 4.x * standard. */ MOBJ_STAT_ADD(aout_fixed); mflag |= MAP_FIXED; addr = (caddr_t)0x2000; as_rangelock(as); if (as_gap(as, size, &addr, &size, 0, NULL) != 0) { as_rangeunlock(as); MOBJ_STAT_ADD(aout_addr_in_use); return (EADDRINUSE); } crargs.flags |= MAP_NORESERVE; error = as_map(as, addr, size, segvn_create, &crargs); ASSERT(addr == (caddr_t)0x2000); as_rangeunlock(as); } start_addr = addr; osize = size; /* * Map as large as we need, backed by file, this will be text, and * possibly the nlist segment. We map over this mapping for bss and * initialized data segments. */ error = VOP_MAP(vp, off, as, &addr, size, prot, PROT_ALL, mflag, fcred, NULL); if (error) { if (!is_library) { (void) as_unmap(as, start_addr, osize); } return (error); } /* pickup the value of start_addr and osize for libraries */ start_addr = addr; osize = size; /* * We have our initial reservation/allocation so we need to use fixed * addresses from now on. */ mflag |= MAP_FIXED; mrp[0].mr_addr = addr; mrp[0].mr_msize = hdr->a_text; mrp[0].mr_fsize = hdr->a_text; mrp[0].mr_offset = 0; mrp[0].mr_prot = PROT_READ | PROT_EXEC; mrp[0].mr_flags = MR_HDR_AOUT; /* * Map initialized data. We are mapping over a portion of the * previous mapping which will be unmapped in VOP_MAP below. */ off = P2ROUNDUP((offset_t)(hdr->a_text), PAGESIZE); msize = off; addr += off; size = hdr->a_data; error = VOP_MAP(vp, off, as, &addr, size, PROT_ALL, PROT_ALL, mflag, fcred, NULL); if (error) { (void) as_unmap(as, start_addr, osize); return (error); } msize += size; mrp[1].mr_addr = addr; mrp[1].mr_msize = size; mrp[1].mr_fsize = size; mrp[1].mr_offset = 0; mrp[1].mr_prot = PROT_READ | PROT_WRITE | PROT_EXEC; mrp[1].mr_flags = 0; /* Need to zero out remainder of page */ addr += hdr->a_data; zfoddiff = P2PHASE((size_t)addr, PAGESIZE); if (zfoddiff) { label_t ljb; MOBJ_STAT_ADD(aout_zfoddiff); zfoddiff = PAGESIZE - zfoddiff; if (on_fault(&ljb)) { no_fault(); MOBJ_STAT_ADD(aout_uzero_fault); (void) as_unmap(as, start_addr, osize); return (EFAULT); } uzero(addr, zfoddiff); no_fault(); } msize += zfoddiff; segnum = 2; /* Map bss */ if (hdr->a_bss > zfoddiff) { struct segvn_crargs crargs = SEGVN_ZFOD_ARGS(PROT_ZFOD, PROT_ALL); MOBJ_STAT_ADD(aout_map_bss); addr += zfoddiff; size = hdr->a_bss - zfoddiff; as_rangelock(as); (void) as_unmap(as, addr, size); error = as_map(as, addr, size, segvn_create, &crargs); as_rangeunlock(as); msize += size; if (error) { MOBJ_STAT_ADD(aout_bss_fail); (void) as_unmap(as, start_addr, osize); return (error); } mrp[2].mr_addr = addr; mrp[2].mr_msize = size; mrp[2].mr_fsize = 0; mrp[2].mr_offset = 0; mrp[2].mr_prot = PROT_READ | PROT_WRITE | PROT_EXEC; mrp[2].mr_flags = 0; addr += size; segnum = 3; } /* * If we have extra bits left over, we need to include that in how * much we mapped to make sure the nlist logic is correct */ msize = P2ROUNDUP(msize, PAGESIZE); if (nsize && msize < nsize) { MOBJ_STAT_ADD(aout_nlist); mrp[segnum].mr_addr = addr; mrp[segnum].mr_msize = nsize - msize; mrp[segnum].mr_fsize = 0; mrp[segnum].mr_offset = 0; mrp[segnum].mr_prot = PROT_READ | PROT_EXEC; mrp[segnum].mr_flags = 0; } *num_mapped = to_map; return (0); } #endif /* * These are the two types of files that we can interpret and we want to read * in enough info to cover both types when looking at the initial header. */ #define MAX_HEADER_SIZE (MAX(sizeof (Ehdr), sizeof (struct exec))) /* * Map vp passed in in an interpreted manner. ELF and AOUT files will be * interpreted and mapped appropriately for execution. * num_mapped in - # elements in mrp * num_mapped out - # sections mapped and length of mrp array if * no errors or E2BIG returned. * * Returns 0 on success, errno value on failure. */ static int mmapobj_map_interpret(vnode_t *vp, mmapobj_result_t *mrp, uint_t *num_mapped, size_t padding, cred_t *fcred) { int error = 0; vattr_t vattr; struct lib_va *lvp; caddr_t start_addr; model_t model; /* * header has to be aligned to the native size of ulong_t in order * to avoid an unaligned access when dereferencing the header as * a ulong_t. Thus we allocate our array on the stack of type * ulong_t and then have header, which we dereference later as a char * array point at lheader. */ ulong_t lheader[(MAX_HEADER_SIZE / (sizeof (ulong_t))) + 1]; caddr_t header = (caddr_t)&lheader; vattr.va_mask = AT_FSID | AT_NODEID | AT_CTIME | AT_MTIME | AT_SIZE; error = VOP_GETATTR(vp, &vattr, 0, fcred, NULL); if (error) { return (error); } /* * Check lib_va to see if we already have a full description * for this library. This is the fast path and only used for * ET_DYN ELF files (dynamic libraries). */ if (padding == 0 && !secflag_enabled(curproc, PROC_SEC_ASLR) && ((lvp = lib_va_find(&vattr)) != NULL)) { int num_segs; model = get_udatamodel(); if ((model == DATAMODEL_ILP32 && lvp->lv_flags & LV_ELF64) || (model == DATAMODEL_LP64 && lvp->lv_flags & LV_ELF32)) { lib_va_release(lvp); MOBJ_STAT_ADD(fast_wrong_model); return (ENOTSUP); } num_segs = lvp->lv_num_segs; if (*num_mapped < num_segs) { *num_mapped = num_segs; lib_va_release(lvp); MOBJ_STAT_ADD(fast_e2big); return (E2BIG); } /* * Check to see if we have all the mappable program headers * cached. */ if (num_segs <= LIBVA_CACHED_SEGS && num_segs != 0) { MOBJ_STAT_ADD(fast); start_addr = mmapobj_lookup_start_addr(lvp); if (start_addr == NULL) { lib_va_release(lvp); return (ENOMEM); } bcopy(lvp->lv_mps, mrp, num_segs * sizeof (mmapobj_result_t)); error = mmapobj_map_elf(vp, start_addr, mrp, num_segs, fcred, ET_DYN); lib_va_release(lvp); if (error == 0) { *num_mapped = num_segs; MOBJ_STAT_ADD(fast_success); } return (error); } MOBJ_STAT_ADD(fast_not_now); /* Release it for now since we'll look it up below */ lib_va_release(lvp); } /* * Time to see if this is a file we can interpret. If it's smaller * than this, then we can't interpret it. */ if (vattr.va_size < MAX_HEADER_SIZE) { MOBJ_STAT_ADD(small_file); return (ENOTSUP); } if ((error = vn_rdwr(UIO_READ, vp, header, MAX_HEADER_SIZE, 0, UIO_SYSSPACE, 0, (rlim64_t)0, fcred, NULL)) != 0) { MOBJ_STAT_ADD(read_error); return (error); } /* Verify file type */ if (header[EI_MAG0] == ELFMAG0 && header[EI_MAG1] == ELFMAG1 && header[EI_MAG2] == ELFMAG2 && header[EI_MAG3] == ELFMAG3) { return (doelfwork((Ehdr *)lheader, vp, mrp, num_mapped, padding, fcred)); } #if defined(__sparc) /* On sparc, check for 4.X AOUT format */ switch (((struct exec *)header)->a_magic) { case OMAGIC: case ZMAGIC: case NMAGIC: return (doaoutwork(vp, mrp, num_mapped, (struct exec *)lheader, fcred)); } #endif /* Unsupported type */ MOBJ_STAT_ADD(unsupported); return (ENOTSUP); } /* * Given a vnode, map it as either a flat file or interpret it and map * it according to the rules of the file type. * *num_mapped will contain the size of the mmapobj_result_t array passed in. * If padding is non-zero, the mappings will be padded by that amount * rounded up to the nearest pagesize. * If the mapping is successful, *num_mapped will contain the number of * distinct mappings created, and mrp will point to the array of * mmapobj_result_t's which describe these mappings. * * On error, -1 is returned and errno is set appropriately. * A special error case will set errno to E2BIG when there are more than * *num_mapped mappings to be created and *num_mapped will be set to the * number of mappings needed. */ int mmapobj(vnode_t *vp, uint_t flags, mmapobj_result_t *mrp, uint_t *num_mapped, size_t padding, cred_t *fcred) { int to_map; int error = 0; ASSERT((padding & PAGEOFFSET) == 0); ASSERT((flags & ~MMOBJ_ALL_FLAGS) == 0); ASSERT(num_mapped != NULL); ASSERT((flags & MMOBJ_PADDING) ? padding != 0 : padding == 0); if ((flags & MMOBJ_INTERPRET) == 0) { to_map = padding ? 3 : 1; if (*num_mapped < to_map) { *num_mapped = to_map; MOBJ_STAT_ADD(flat_e2big); return (E2BIG); } error = mmapobj_map_flat(vp, mrp, padding, fcred); if (error) { return (error); } *num_mapped = to_map; return (0); } error = mmapobj_map_interpret(vp, mrp, num_mapped, padding, fcred); return (error); }