/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. * * Copyright 2019 Joyent, Inc. */ /* * Sun DDI hotplug implementation specific functions */ /* * HOTPLUG FRAMEWORK * * The hotplug framework (also referred to "SHP", for "Solaris Hotplug * Framework") refers to a large set of userland and kernel interfaces, * including those in this file, that provide functionality related to device * hotplug. * * Hotplug is a broad term that refers to both removal and insertion of devices * on a live system. Such operations can have varying levels of notification to * the system. Coordinated hotplug means that the operating system is notified * in advance that a device will have a hotplug operation performed on it. * Non-coordinated hotplug, also called "surprise removal", does not have such * notification, and the device is simply removed or inserted from the system. * * The goals of a correct hotplug operation will vary based on the device. In * general, though, we want the system to gracefully notice the device change * and clean up (or create) any relevant structures related to using the device * in the system. * * The goals of the hotplug framework are to provide common interfaces for nexus * drivers, device drivers, and userland programs to build a foundation for * implementing hotplug for a variety of devices. Notably, common support for * PCIe devices is available. See also: the nexus driver for PCIe devices at * uts/i86pc/io/pciex/npe.c. * * * TERMINOLOGY * * The following terms may be useful when exploring hotplug-related code. * * PHYSICAL HOTPLUG * Refers to hotplug operations on a physical hardware receptacle. * * VIRTUAL HOTPLUG * Refers to hotplug operations on an arbitrary device node in the device * tree. * * CONNECTION (often abbreviated "cn") * A place where either physical or virtual hotplug happens. This is a more * generic term to refer to "connectors" and "ports", which represent * physical and virtual places where hotplug happens, respectively. * * CONNECTOR * A place where physical hotplug happens. For example: a PCIe slot, a USB * port, a SAS port, and a fiber channel port are all connectors. * * PORT * A place where virtual hotplug happens. A port refers to an arbitrary * place under a nexus dev_info node in the device tree. * * * CONNECTION STATE MACHINE * * Connections have the states below. Connectors and ports are grouped into * the same state machine. It is worth noting that the edges here are incomplete * -- it is possible for a connection to move straight from ENABLED to EMPTY, * for instance, if there is a surprise removal of its device. * * State changes are kicked off through two ways: * - Through the nexus driver interface, ndi_hp_state_change_req. PCIe * nexus drivers that pass a hotplug interrupt through to pciehpc will kick * off state changes in this way. * - Through coordinated removal, ddihp_modctl. Both cfgadm(1M) and * hotplug(1M) pass state change requests through hotplugd, which uses * modctl to request state changes to the DDI hotplug framework. That * interface is ultimately implemented by ddihp_modctl. * * (start) * | * v * EMPTY no component plugged into connector * ^ * v * PRESENT component plugged into connector * ^ * v * POWERED connector is powered * ^ * v * ENABLED connector is fully functional * | * . * . * . * v * (create port) * | * v * PORT EMPTY port has no device occupying it * ^ * v * PORT PRESENT port occupied by device * * * ARCHITECTURE DIAGRAM * * The following is a non-exhaustive summary of various components in the system * that implement pieces of the hotplug framework. More detailed descriptions * of some key components are below. * * +------------+ * | cfgadm(1M) | * +------------+ * | * +-------------------+ * | SHP cfgadm plugin | * +-------------------+ * | * +-------------+ +------------+ * | hotplug(1M) |----------| libhotplug | * +-------------+ +------------+ * | * +----------+ * | hotplugd | * +----------+ * | * +----------------+ * | modctl (HP op) | * +----------------+ * | * | * User | * =============================|=============================================== * Kernel | * | * | * +------------------------+ +----------------+ * | DDI hotplug interfaces | --- | Device Drivers | * +------------------------+ +----------------+ * | | * | +------------------------+ * | | NDI hotplug interfaces | * | +------------------------+ * | | * | | * +-------------+ +--------------+ +---------------------------+ * | `bus_hp_op` | -- |"pcie" module | --- | "npe" (PCIe nexus driver) | * +-------------+ +--------------+ +---------------------------+ * | | * | +-------------------+ * | | PCIe configurator | * | +-------------------+ * | * +-------------------------------------+ * | "pciehpc" (PCIe hotplug controller) | * +-------------------------------------+ * * * . * . * . * . * . * | * | * +-----------------------------------+ * | I/O Subsystem | * | (LDI notifications and contracts) | * +-----------------------------------+ * * * KEY HOTPLUG SOFTWARE COMPONENTS * * CFGADM(1M) * * cfgadm is the canonical tool for hotplug operations. It can be used to * list connections on the system and change their state in a coordinated * fashion. For more information, see its manual page. * * * HOTPLUG(1M) * * hotplug is a command line tool for managing hotplug connections for * connectors. For more information, see its manual page. * * * DDI HOTPLUG INTERFACES * * This part of the framework provides interfaces for changing device state * for connectors, including onlining and offlining child devices. Many of * these functions are defined in this file. * * * NDI HOTPLUG INTERFACES * * Nexus drivers can define their own hotplug bus implementations by * defining a bus_hp_op entry point. This entry point must implement * a set of hotplug related commands, including getting, probing, and * changing connection state, as well as port creation and removal. * * Nexus drivers may also want to use the following interfaces for * implementing hotplug. Note that the PCIe Hotplug Controller ("pciehpc") * already takes care of using these: * ndi_hp_{register,unregister} * ndi_hp_state_change_req * ndi_hp_walk_cn * * PCIe nexus drivers should use the common entry point pcie_hp_common_ops, * which implements hotplug commands for PCIe devices, calling into other * parts of the framework as needed. * * * NPE DRIVER ("npe") * * npe is the common nexus driver for PCIe devices on x86. It implements * hotplug using the NDI interfaces. For more information, see * uts/i86pc/io/pciex/npe.c. * * The equivalent driver for SPARC is "px". * * * PCIe HOTPLUG CONTROLLER DRIVER ("pciehpc") * * All hotplug-capable PCIe buses will initialize their own PCIe HPC, * including the pcieb and ppb drivers. The controller maintains * hotplug-related state about the slots on its bus, including their status * and port state. It also features a common implementation of handling * hotplug-related PCIe interrupts. * * For more information, see its interfaces in * uts/common/sys/hotplug/pci/pciehpc.h. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * Local function prototypes */ /* Connector operations */ static int ddihp_cn_pre_change_state(ddi_hp_cn_handle_t *hdlp, ddi_hp_cn_state_t target_state); static int ddihp_cn_post_change_state(ddi_hp_cn_handle_t *hdlp, ddi_hp_cn_state_t new_state); static int ddihp_cn_handle_state_change(ddi_hp_cn_handle_t *hdlp); static int ddihp_cn_change_children_state(ddi_hp_cn_handle_t *hdlp, boolean_t online); /* Port operations */ static int ddihp_port_change_state(ddi_hp_cn_handle_t *hdlp, ddi_hp_cn_state_t target_state); static int ddihp_port_upgrade_state(ddi_hp_cn_handle_t *hdlp, ddi_hp_cn_state_t target_state); static int ddihp_port_downgrade_state(ddi_hp_cn_handle_t *hdlp, ddi_hp_cn_state_t target_state); /* Misc routines */ static void ddihp_update_last_change(ddi_hp_cn_handle_t *hdlp); static boolean_t ddihp_check_status_prop(dev_info_t *dip); /* * Global functions (called within hotplug framework) */ /* * Implement modctl() commands for hotplug. * Called by modctl_hp() in modctl.c */ int ddihp_modctl(int hp_op, char *path, char *cn_name, uintptr_t arg, uintptr_t rval) { dev_info_t *dip; ddi_hp_cn_handle_t *hdlp; ddi_hp_op_t op = (ddi_hp_op_t)hp_op; int count, rv, error; /* Get the dip of nexus node */ dip = e_ddi_hold_devi_by_path(path, 0); if (dip == NULL) return (ENXIO); DDI_HP_IMPLDBG((CE_CONT, "ddihp_modctl: dip %p op %x path %s " "cn_name %s arg %p rval %p\n", (void *)dip, hp_op, path, cn_name, (void *)arg, (void *)rval)); if (!NEXUS_HAS_HP_OP(dip)) { ddi_release_devi(dip); return (ENOTSUP); } /* Lock before access */ ndi_devi_enter(dip, &count); hdlp = ddihp_cn_name_to_handle(dip, cn_name); if (hp_op == DDI_HPOP_CN_CREATE_PORT) { if (hdlp != NULL) { /* this port already exists. */ error = EEXIST; goto done; } rv = (*(DEVI(dip)->devi_ops->devo_bus_ops->bus_hp_op))( dip, cn_name, op, NULL, NULL); } else { if (hdlp == NULL) { /* Invalid Connection name */ error = ENXIO; goto done; } if (hp_op == DDI_HPOP_CN_CHANGE_STATE) { ddi_hp_cn_state_t target_state = (ddi_hp_cn_state_t)arg; ddi_hp_cn_state_t result_state = 0; DDIHP_CN_OPS(hdlp, op, (void *)&target_state, (void *)&result_state, rv); DDI_HP_IMPLDBG((CE_CONT, "ddihp_modctl: target_state=" "%x, result_state=%x, rv=%x \n", target_state, result_state, rv)); } else { DDIHP_CN_OPS(hdlp, op, (void *)arg, (void *)rval, rv); } } switch (rv) { case DDI_SUCCESS: error = 0; break; case DDI_EINVAL: error = EINVAL; break; case DDI_EBUSY: error = EBUSY; break; case DDI_ENOTSUP: error = ENOTSUP; break; case DDI_ENOMEM: error = ENOMEM; break; default: error = EIO; } done: ndi_devi_exit(dip, count); ddi_release_devi(dip); return (error); } /* * Fetch the state of Hotplug Connection (CN). * This function will also update the state and last changed timestamp in the * connection handle structure if the state has changed. */ int ddihp_cn_getstate(ddi_hp_cn_handle_t *hdlp) { ddi_hp_cn_state_t new_state; int ret; DDI_HP_IMPLDBG((CE_CONT, "ddihp_cn_getstate: pdip %p hdlp %p\n", (void *)hdlp->cn_dip, (void *)hdlp)); ASSERT(DEVI_BUSY_OWNED(hdlp->cn_dip)); DDIHP_CN_OPS(hdlp, DDI_HPOP_CN_GET_STATE, NULL, (void *)&new_state, ret); if (ret != DDI_SUCCESS) { DDI_HP_IMPLDBG((CE_CONT, "ddihp_cn_getstate: " "CN %p getstate command failed\n", (void *)hdlp)); return (ret); } DDI_HP_IMPLDBG((CE_CONT, "ddihp_cn_getstate: hdlp %p " "current Connection state %x new Connection state %x\n", (void *)hdlp, hdlp->cn_info.cn_state, new_state)); if (new_state != hdlp->cn_info.cn_state) { hdlp->cn_info.cn_state = new_state; ddihp_update_last_change(hdlp); } return (ret); } /* * Implementation function for unregistering the Hotplug Connection (CN) */ int ddihp_cn_unregister(ddi_hp_cn_handle_t *hdlp) { dev_info_t *dip = hdlp->cn_dip; DDI_HP_NEXDBG((CE_CONT, "ddihp_cn_unregister: hdlp %p\n", (void *)hdlp)); ASSERT(DEVI_BUSY_OWNED(dip)); (void) ddihp_cn_getstate(hdlp); if (hdlp->cn_info.cn_state > DDI_HP_CN_STATE_OFFLINE) { DDI_HP_NEXDBG((CE_CONT, "ddihp_cn_unregister: dip %p, hdlp %p " "state %x. Device busy, failed to unregister connection!\n", (void *)dip, (void *)hdlp, hdlp->cn_info.cn_state)); return (DDI_EBUSY); } /* unlink the handle */ DDIHP_LIST_REMOVE(ddi_hp_cn_handle_t, (DEVI(dip)->devi_hp_hdlp), hdlp); kmem_free(hdlp->cn_info.cn_name, strlen(hdlp->cn_info.cn_name) + 1); kmem_free(hdlp, sizeof (ddi_hp_cn_handle_t)); return (DDI_SUCCESS); } /* * For a given Connection name and the dip node where the Connection is * supposed to be, find the corresponding hotplug handle. */ ddi_hp_cn_handle_t * ddihp_cn_name_to_handle(dev_info_t *dip, char *cn_name) { ddi_hp_cn_handle_t *hdlp; ASSERT(DEVI_BUSY_OWNED(dip)); DDI_HP_IMPLDBG((CE_CONT, "ddihp_cn_name_to_handle: " "dip %p cn_name to find: %s", (void *)dip, cn_name)); for (hdlp = DEVI(dip)->devi_hp_hdlp; hdlp; hdlp = hdlp->next) { DDI_HP_IMPLDBG((CE_CONT, "ddihp_cn_name_to_handle: " "current cn_name: %s", hdlp->cn_info.cn_name)); if (strcmp(cn_name, hdlp->cn_info.cn_name) == 0) { /* found */ return (hdlp); } } DDI_HP_IMPLDBG((CE_CONT, "ddihp_cn_name_to_handle: " "failed to find cn_name")); return (NULL); } /* * Process the hotplug operations for Connector and also create Port * upon user command. */ int ddihp_connector_ops(ddi_hp_cn_handle_t *hdlp, ddi_hp_op_t op, void *arg, void *result) { int rv = DDI_SUCCESS; dev_info_t *dip = hdlp->cn_dip; ASSERT(DEVI_BUSY_OWNED(dip)); DDI_HP_IMPLDBG((CE_CONT, "ddihp_connector_ops: pdip=%p op=%x " "hdlp=%p arg=%p\n", (void *)dip, op, (void *)hdlp, arg)); if (op == DDI_HPOP_CN_CHANGE_STATE) { ddi_hp_cn_state_t target_state = *(ddi_hp_cn_state_t *)arg; rv = ddihp_cn_pre_change_state(hdlp, target_state); if (rv != DDI_SUCCESS) { /* the state is not changed */ *((ddi_hp_cn_state_t *)result) = hdlp->cn_info.cn_state; return (rv); } } ASSERT(NEXUS_HAS_HP_OP(dip)); rv = (*(DEVI(dip)->devi_ops->devo_bus_ops->bus_hp_op))( dip, hdlp->cn_info.cn_name, op, arg, result); if (rv != DDI_SUCCESS) { DDI_HP_IMPLDBG((CE_CONT, "ddihp_connector_ops: " "bus_hp_op failed: pdip=%p cn_name:%s op=%x " "hdlp=%p arg=%p\n", (void *)dip, hdlp->cn_info.cn_name, op, (void *)hdlp, arg)); } if (op == DDI_HPOP_CN_CHANGE_STATE) { int rv_post; DDI_HP_IMPLDBG((CE_CONT, "ddihp_connector_ops: " "old_state=%x, new_state=%x, rv=%x\n", hdlp->cn_info.cn_state, *(ddi_hp_cn_state_t *)result, rv)); /* * After state change op is successfully done or * failed at some stages, continue to do some jobs. */ rv_post = ddihp_cn_post_change_state(hdlp, *(ddi_hp_cn_state_t *)result); if (rv_post != DDI_SUCCESS) rv = rv_post; } return (rv); } /* * Process the hotplug op for Port */ int ddihp_port_ops(ddi_hp_cn_handle_t *hdlp, ddi_hp_op_t op, void *arg, void *result) { int ret = DDI_SUCCESS; ASSERT(DEVI_BUSY_OWNED(hdlp->cn_dip)); DDI_HP_IMPLDBG((CE_CONT, "ddihp_port_ops: pdip=%p op=%x hdlp=%p " "arg=%p\n", (void *)hdlp->cn_dip, op, (void *)hdlp, arg)); switch (op) { case DDI_HPOP_CN_GET_STATE: { int state; state = hdlp->cn_info.cn_state; if (hdlp->cn_info.cn_child == NULL) { /* No child. Either present or empty. */ if (state >= DDI_HP_CN_STATE_PORT_PRESENT) state = DDI_HP_CN_STATE_PORT_PRESENT; else state = DDI_HP_CN_STATE_PORT_EMPTY; } else { /* There is a child of this Port */ /* Check DEVI(dip)->devi_node_state */ switch (i_ddi_node_state(hdlp->cn_info.cn_child)) { case DS_INVAL: case DS_PROTO: case DS_LINKED: case DS_BOUND: case DS_INITIALIZED: case DS_PROBED: state = DDI_HP_CN_STATE_OFFLINE; break; case DS_ATTACHED: state = DDI_HP_CN_STATE_MAINTENANCE; break; case DS_READY: state = DDI_HP_CN_STATE_ONLINE; break; default: /* should never reach here */ ASSERT("unknown devinfo state"); } /* * Check DEVI(dip)->devi_state in case the node is * downgraded or quiesced. */ if (state == DDI_HP_CN_STATE_ONLINE && ddi_get_devstate(hdlp->cn_info.cn_child) != DDI_DEVSTATE_UP) state = DDI_HP_CN_STATE_MAINTENANCE; } *((ddi_hp_cn_state_t *)result) = state; break; } case DDI_HPOP_CN_CHANGE_STATE: { ddi_hp_cn_state_t target_state = *(ddi_hp_cn_state_t *)arg; ddi_hp_cn_state_t curr_state = hdlp->cn_info.cn_state; ret = ddihp_port_change_state(hdlp, target_state); if (curr_state != hdlp->cn_info.cn_state) { ddihp_update_last_change(hdlp); } *((ddi_hp_cn_state_t *)result) = hdlp->cn_info.cn_state; break; } case DDI_HPOP_CN_REMOVE_PORT: { (void) ddihp_cn_getstate(hdlp); if (hdlp->cn_info.cn_state != DDI_HP_CN_STATE_PORT_EMPTY) { /* Only empty PORT can be removed by commands */ ret = DDI_EBUSY; break; } ret = ddihp_cn_unregister(hdlp); break; } default: ret = DDI_ENOTSUP; break; } return (ret); } /* * Generate the system event with a possible hint */ /* ARGSUSED */ void ddihp_cn_gen_sysevent(ddi_hp_cn_handle_t *hdlp, ddi_hp_cn_sysevent_t event_sub_class, int hint, int kmflag) { dev_info_t *dip = hdlp->cn_dip; char *cn_path, *ap_id; char *ev_subclass = NULL; nvlist_t *ev_attr_list = NULL; sysevent_id_t eid; int ap_id_len, err; cn_path = kmem_zalloc(MAXPATHLEN, kmflag); if (cn_path == NULL) { cmn_err(CE_WARN, "%s%d: Failed to allocate memory for hotplug" " connection: %s\n", ddi_driver_name(dip), ddi_get_instance(dip), hdlp->cn_info.cn_name); return; } /* * Minor device name will be bus path * concatenated with connection name. * One of consumers of the sysevent will pass it * to cfgadm as AP ID. */ (void) strcpy(cn_path, "/devices"); (void) ddi_pathname(dip, cn_path + strlen("/devices")); ap_id_len = strlen(cn_path) + strlen(":") + strlen(hdlp->cn_info.cn_name) + 1; ap_id = kmem_zalloc(ap_id_len, kmflag); if (ap_id == NULL) { cmn_err(CE_WARN, "%s%d: Failed to allocate memory for AP ID: %s:%s\n", ddi_driver_name(dip), ddi_get_instance(dip), cn_path, hdlp->cn_info.cn_name); kmem_free(cn_path, MAXPATHLEN); return; } (void) strcpy(ap_id, cn_path); (void) strcat(ap_id, ":"); (void) strcat(ap_id, hdlp->cn_info.cn_name); kmem_free(cn_path, MAXPATHLEN); err = nvlist_alloc(&ev_attr_list, NV_UNIQUE_NAME_TYPE, kmflag); if (err != 0) { cmn_err(CE_WARN, "%s%d: Failed to allocate memory for event subclass %d\n", ddi_driver_name(dip), ddi_get_instance(dip), event_sub_class); kmem_free(ap_id, ap_id_len); return; } switch (event_sub_class) { case DDI_HP_CN_STATE_CHANGE: ev_subclass = ESC_DR_AP_STATE_CHANGE; switch (hint) { case SE_NO_HINT: /* fall through */ case SE_HINT_INSERT: /* fall through */ case SE_HINT_REMOVE: err = nvlist_add_string(ev_attr_list, DR_HINT, SE_HINT2STR(hint)); if (err != 0) { cmn_err(CE_WARN, "%s%d: Failed to add attr [%s]" " for %s event\n", ddi_driver_name(dip), ddi_get_instance(dip), DR_HINT, ESC_DR_AP_STATE_CHANGE); goto done; } break; default: cmn_err(CE_WARN, "%s%d: Unknown hint on sysevent\n", ddi_driver_name(dip), ddi_get_instance(dip)); goto done; } break; /* event sub class: DDI_HP_CN_REQ */ case DDI_HP_CN_REQ: ev_subclass = ESC_DR_REQ; switch (hint) { case SE_INVESTIGATE_RES: /* fall through */ case SE_INCOMING_RES: /* fall through */ case SE_OUTGOING_RES: /* fall through */ err = nvlist_add_string(ev_attr_list, DR_REQ_TYPE, SE_REQ2STR(hint)); if (err != 0) { cmn_err(CE_WARN, "%s%d: Failed to add attr [%s] for %s \n" "event", ddi_driver_name(dip), ddi_get_instance(dip), DR_REQ_TYPE, ESC_DR_REQ); goto done; } break; default: cmn_err(CE_WARN, "%s%d: Unknown hint on sysevent\n", ddi_driver_name(dip), ddi_get_instance(dip)); goto done; } break; default: cmn_err(CE_WARN, "%s%d: Unknown Event subclass\n", ddi_driver_name(dip), ddi_get_instance(dip)); goto done; } /* * Add Hotplug Connection (CN) as attribute (common attribute) */ err = nvlist_add_string(ev_attr_list, DR_AP_ID, ap_id); if (err != 0) { cmn_err(CE_WARN, "%s%d: Failed to add attr [%s] for %s event\n", ddi_driver_name(dip), ddi_get_instance(dip), DR_AP_ID, EC_DR); goto done; } /* * Log this event with sysevent framework. */ err = ddi_log_sysevent(dip, DDI_VENDOR_SUNW, EC_DR, ev_subclass, ev_attr_list, &eid, ((kmflag == KM_SLEEP) ? DDI_SLEEP : DDI_NOSLEEP)); if (err != 0) { cmn_err(CE_WARN, "%s%d: Failed to log %s event\n", ddi_driver_name(dip), ddi_get_instance(dip), EC_DR); } done: nvlist_free(ev_attr_list); kmem_free(ap_id, ap_id_len); } /* * Local functions (called within this file) */ /* * Connector operations */ /* * Prepare to change state for a Connector: offline, unprobe, etc. */ static int ddihp_cn_pre_change_state(ddi_hp_cn_handle_t *hdlp, ddi_hp_cn_state_t target_state) { ddi_hp_cn_state_t curr_state = hdlp->cn_info.cn_state; dev_info_t *dip = hdlp->cn_dip; int rv = DDI_SUCCESS; if (curr_state > target_state && curr_state == DDI_HP_CN_STATE_ENABLED) { /* * If the Connection goes to a lower state from ENABLED, * then offline all children under it. */ rv = ddihp_cn_change_children_state(hdlp, B_FALSE); if (rv != DDI_SUCCESS) { cmn_err(CE_WARN, "(%s%d): " "failed to unconfigure the device in the" " Connection %s\n", ddi_driver_name(dip), ddi_get_instance(dip), hdlp->cn_info.cn_name); return (rv); } ASSERT(NEXUS_HAS_HP_OP(dip)); /* * Remove all the children and their ports * after they are offlined. */ rv = (*(DEVI(dip)->devi_ops->devo_bus_ops->bus_hp_op))( dip, hdlp->cn_info.cn_name, DDI_HPOP_CN_UNPROBE, NULL, NULL); if (rv != DDI_SUCCESS) { cmn_err(CE_WARN, "(%s%d): failed" " to unprobe the device in the Connector" " %s\n", ddi_driver_name(dip), ddi_get_instance(dip), hdlp->cn_info.cn_name); return (rv); } DDI_HP_NEXDBG((CE_CONT, "ddihp_connector_ops (%s%d): device" " is unconfigured and unprobed in Connector %s\n", ddi_driver_name(dip), ddi_get_instance(dip), hdlp->cn_info.cn_name)); } return (rv); } /* * Jobs after change state of a Connector: update state, last change time, * probe, online, sysevent, etc. */ static int ddihp_cn_post_change_state(ddi_hp_cn_handle_t *hdlp, ddi_hp_cn_state_t new_state) { int rv = DDI_SUCCESS; ddi_hp_cn_state_t curr_state = hdlp->cn_info.cn_state; /* Update the state in handle */ if (new_state != curr_state) { hdlp->cn_info.cn_state = new_state; ddihp_update_last_change(hdlp); } if (curr_state < new_state && new_state == DDI_HP_CN_STATE_ENABLED) { /* * Probe and online devices if state is * upgraded to ENABLED. */ rv = ddihp_cn_handle_state_change(hdlp); } if (curr_state != hdlp->cn_info.cn_state) { /* * For Connector, generate a sysevent on * state change. */ ddihp_cn_gen_sysevent(hdlp, DDI_HP_CN_STATE_CHANGE, SE_NO_HINT, KM_SLEEP); } return (rv); } /* * Handle Connector state change. * * This function is called after connector is upgraded to ENABLED sate. * It probes the device plugged in the connector to setup devinfo nodes * and then online the nodes. */ static int ddihp_cn_handle_state_change(ddi_hp_cn_handle_t *hdlp) { dev_info_t *dip = hdlp->cn_dip; int rv = DDI_SUCCESS; ASSERT(DEVI_BUSY_OWNED(dip)); ASSERT(NEXUS_HAS_HP_OP(dip)); /* * If the Connection went to state ENABLED from a lower state, * probe it. */ rv = (*(DEVI(dip)->devi_ops->devo_bus_ops->bus_hp_op))( dip, hdlp->cn_info.cn_name, DDI_HPOP_CN_PROBE, NULL, NULL); if (rv != DDI_SUCCESS) { ddi_hp_cn_state_t target_state = DDI_HP_CN_STATE_POWERED; ddi_hp_cn_state_t result_state = 0; /* * Probe failed. Disable the connector so that it can * be enabled again by a later try from userland. */ (void) (*(DEVI(dip)->devi_ops->devo_bus_ops->bus_hp_op))( dip, hdlp->cn_info.cn_name, DDI_HPOP_CN_CHANGE_STATE, (void *)&target_state, (void *)&result_state); if (result_state && result_state != hdlp->cn_info.cn_state) { hdlp->cn_info.cn_state = result_state; ddihp_update_last_change(hdlp); } cmn_err(CE_WARN, "(%s%d): failed to probe the Connection %s\n", ddi_driver_name(dip), ddi_get_instance(dip), hdlp->cn_info.cn_name); return (rv); } /* * Try to online all the children of CN. */ (void) ddihp_cn_change_children_state(hdlp, B_TRUE); DDI_HP_NEXDBG((CE_CONT, "ddihp_cn_event_handler (%s%d): " "device is configured in the Connection %s\n", ddi_driver_name(dip), ddi_get_instance(dip), hdlp->cn_info.cn_name)); return (rv); } /* * Online/Offline all the children under the Hotplug Connection (CN) * * Do online operation when the online parameter is true; otherwise do offline. */ static int ddihp_cn_change_children_state(ddi_hp_cn_handle_t *hdlp, boolean_t online) { dev_info_t *dip = hdlp->cn_dip; dev_info_t *cdip; ddi_hp_cn_handle_t *h; int rv = DDI_SUCCESS; DDI_HP_IMPLDBG((CE_CONT, "ddihp_cn_change_children_state:" " dip %p hdlp %p, online %x\n", (void *)dip, (void *)hdlp, online)); ASSERT(DEVI_BUSY_OWNED(dip)); /* * Return invalid if Connection state is < DDI_HP_CN_STATE_ENABLED * when try to online children. */ if (online && hdlp->cn_info.cn_state < DDI_HP_CN_STATE_ENABLED) { DDI_HP_IMPLDBG((CE_CONT, "ddihp_cn_change_children_state: " "Connector %p is not in probed state\n", (void *)hdlp)); return (DDI_EINVAL); } /* Now, online/offline all the devices depending on the Connector */ if (!online) { /* * For offline operation we need to firstly clean up devfs * so as not to prevent driver detach. */ (void) devfs_clean(dip, NULL, DV_CLEAN_FORCE); } for (h = DEVI(dip)->devi_hp_hdlp; h; h = h->next) { if (h->cn_info.cn_type != DDI_HP_CN_TYPE_VIRTUAL_PORT) continue; if (h->cn_info.cn_num_dpd_on != hdlp->cn_info.cn_num) continue; cdip = h->cn_info.cn_child; ASSERT(cdip); if (online) { /* online children */ if (!ddihp_check_status_prop(dip)) continue; if (ndi_devi_online(cdip, NDI_ONLINE_ATTACH | NDI_CONFIG) != NDI_SUCCESS) { cmn_err(CE_WARN, "(%s%d):" " failed to attach driver for a device" " (%s%d) under the Connection %s\n", ddi_driver_name(dip), ddi_get_instance(dip), ddi_driver_name(cdip), ddi_get_instance(cdip), hdlp->cn_info.cn_name); /* * One of the devices failed to online, but we * want to continue to online the rest siblings * after mark the failure here. */ rv = DDI_FAILURE; continue; } } else { /* offline children */ if (ndi_devi_offline(cdip, NDI_UNCONFIG) != NDI_SUCCESS) { cmn_err(CE_WARN, "(%s%d):" " failed to detach driver for the device" " (%s%d) in the Connection %s\n", ddi_driver_name(dip), ddi_get_instance(dip), ddi_driver_name(cdip), ddi_get_instance(cdip), hdlp->cn_info.cn_name); return (DDI_EBUSY); } } } return (rv); } /* * Port operations */ /* * Change Port state to target_state. */ static int ddihp_port_change_state(ddi_hp_cn_handle_t *hdlp, ddi_hp_cn_state_t target_state) { ddi_hp_cn_state_t curr_state = hdlp->cn_info.cn_state; if (target_state < DDI_HP_CN_STATE_PORT_EMPTY || target_state > DDI_HP_CN_STATE_ONLINE) { return (DDI_EINVAL); } if (curr_state < target_state) return (ddihp_port_upgrade_state(hdlp, target_state)); else if (curr_state > target_state) return (ddihp_port_downgrade_state(hdlp, target_state)); else return (DDI_SUCCESS); } /* * Upgrade port state to target_state. */ static int ddihp_port_upgrade_state(ddi_hp_cn_handle_t *hdlp, ddi_hp_cn_state_t target_state) { ddi_hp_cn_state_t curr_state, new_state, result_state; dev_info_t *cdip; int rv = DDI_SUCCESS; curr_state = hdlp->cn_info.cn_state; while (curr_state < target_state) { switch (curr_state) { case DDI_HP_CN_STATE_PORT_EMPTY: /* Check the existence of the corresponding hardware */ new_state = DDI_HP_CN_STATE_PORT_PRESENT; rv = ddihp_connector_ops(hdlp, DDI_HPOP_CN_CHANGE_STATE, (void *)&new_state, (void *)&result_state); if (rv == DDI_SUCCESS) { hdlp->cn_info.cn_state = result_state; } break; case DDI_HP_CN_STATE_PORT_PRESENT: /* Read-only probe the corresponding hardware. */ new_state = DDI_HP_CN_STATE_OFFLINE; rv = ddihp_connector_ops(hdlp, DDI_HPOP_CN_CHANGE_STATE, (void *)&new_state, &cdip); if (rv == DDI_SUCCESS) { hdlp->cn_info.cn_state = DDI_HP_CN_STATE_OFFLINE; ASSERT(hdlp->cn_info.cn_child == NULL); hdlp->cn_info.cn_child = cdip; } break; case DDI_HP_CN_STATE_OFFLINE: /* fall through */ case DDI_HP_CN_STATE_MAINTENANCE: cdip = hdlp->cn_info.cn_child; rv = ndi_devi_online(cdip, NDI_ONLINE_ATTACH | NDI_CONFIG); if (rv == NDI_SUCCESS) { hdlp->cn_info.cn_state = DDI_HP_CN_STATE_ONLINE; rv = DDI_SUCCESS; } else { rv = DDI_FAILURE; DDI_HP_IMPLDBG((CE_CONT, "ddihp_port_upgrade_state: " "failed to online device %p at port: %s\n", (void *)cdip, hdlp->cn_info.cn_name)); } break; case DDI_HP_CN_STATE_ONLINE: break; default: /* should never reach here */ ASSERT("unknown devinfo state"); } curr_state = hdlp->cn_info.cn_state; if (rv != DDI_SUCCESS) { DDI_HP_IMPLDBG((CE_CONT, "ddihp_port_upgrade_state: " "failed curr_state=%x, target_state=%x \n", curr_state, target_state)); return (rv); } } return (rv); } /* * Downgrade state to target_state */ static int ddihp_port_downgrade_state(ddi_hp_cn_handle_t *hdlp, ddi_hp_cn_state_t target_state) { ddi_hp_cn_state_t curr_state, new_state, result_state; dev_info_t *dip = hdlp->cn_dip; dev_info_t *cdip; int rv = DDI_SUCCESS; curr_state = hdlp->cn_info.cn_state; while (curr_state > target_state) { switch (curr_state) { case DDI_HP_CN_STATE_PORT_EMPTY: break; case DDI_HP_CN_STATE_PORT_PRESENT: /* Check the existence of the corresponding hardware */ new_state = DDI_HP_CN_STATE_PORT_EMPTY; rv = ddihp_connector_ops(hdlp, DDI_HPOP_CN_CHANGE_STATE, (void *)&new_state, (void *)&result_state); if (rv == DDI_SUCCESS) hdlp->cn_info.cn_state = result_state; break; case DDI_HP_CN_STATE_OFFLINE: /* * Read-only unprobe the corresponding hardware: * 1. release the assigned resource; * 2. remove the node pointed by the port's cn_child */ new_state = DDI_HP_CN_STATE_PORT_PRESENT; rv = ddihp_connector_ops(hdlp, DDI_HPOP_CN_CHANGE_STATE, (void *)&new_state, (void *)&result_state); if (rv == DDI_SUCCESS) hdlp->cn_info.cn_state = DDI_HP_CN_STATE_PORT_PRESENT; break; case DDI_HP_CN_STATE_MAINTENANCE: /* fall through. */ case DDI_HP_CN_STATE_ONLINE: cdip = hdlp->cn_info.cn_child; (void) devfs_clean(dip, NULL, DV_CLEAN_FORCE); rv = ndi_devi_offline(cdip, NDI_UNCONFIG); if (rv == NDI_SUCCESS) { hdlp->cn_info.cn_state = DDI_HP_CN_STATE_OFFLINE; rv = DDI_SUCCESS; } else { rv = DDI_EBUSY; DDI_HP_IMPLDBG((CE_CONT, "ddihp_port_downgrade_state: failed " "to offline node, rv=%x, cdip=%p \n", rv, (void *)cdip)); } break; default: /* should never reach here */ ASSERT("unknown devinfo state"); } curr_state = hdlp->cn_info.cn_state; if (rv != DDI_SUCCESS) { DDI_HP_IMPLDBG((CE_CONT, "ddihp_port_downgrade_state: failed " "curr_state=%x, target_state=%x \n", curr_state, target_state)); return (rv); } } return (rv); } /* * Misc routines */ /* Update the last state change time */ static void ddihp_update_last_change(ddi_hp_cn_handle_t *hdlp) { time_t time; if (drv_getparm(TIME, (void *)&time) != DDI_SUCCESS) hdlp->cn_info.cn_last_change = (time_t)-1; else hdlp->cn_info.cn_last_change = (time32_t)time; } /* * Check the device for a 'status' property. A conforming device * should have a status of "okay", "disabled", "fail", or "fail-xxx". * * Return FALSE for a conforming device that is disabled or faulted. * Return TRUE in every other case. * * 'status' property is NOT a bus specific property. It is defined in page 184, * IEEE 1275 spec. The full name of the spec is "IEEE Standard for * Boot (Initialization Configuration) Firmware: Core Requirements and * Practices". */ static boolean_t ddihp_check_status_prop(dev_info_t *dip) { char *status_prop; boolean_t rv = B_TRUE; /* try to get the 'status' property */ if (ddi_prop_lookup_string(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "status", &status_prop) == DDI_PROP_SUCCESS) { /* * test if the status is "disabled", "fail", or * "fail-xxx". */ if (strcmp(status_prop, "disabled") == 0) { rv = B_FALSE; DDI_HP_IMPLDBG((CE_CONT, "ddihp_check_status_prop " "(%s%d): device is in disabled state", ddi_driver_name(dip), ddi_get_instance(dip))); } else if (strncmp(status_prop, "fail", 4) == 0) { rv = B_FALSE; cmn_err(CE_WARN, "hotplug (%s%d): device is in fault state (%s)\n", ddi_driver_name(dip), ddi_get_instance(dip), status_prop); } ddi_prop_free(status_prop); } return (rv); }