/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * Copyright (c) 2012, Joyent Inc. All rights reserved. */ /* * The Cyclic Subsystem * -------------------- * * Prehistory * * Historically, most computer architectures have specified interval-based * timer parts (e.g. SPARCstation's counter/timer; Intel's i8254). While * these parts deal in relative (i.e. not absolute) time values, they are * typically used by the operating system to implement the abstraction of * absolute time. As a result, these parts cannot typically be reprogrammed * without introducing error in the system's notion of time. * * Starting in about 1994, chip architectures began specifying high resolution * timestamp registers. As of this writing (1999), all major chip families * (UltraSPARC, PentiumPro, MIPS, PowerPC, Alpha) have high resolution * timestamp registers, and two (UltraSPARC and MIPS) have added the capacity * to interrupt based on timestamp values. These timestamp-compare registers * present a time-based interrupt source which can be reprogrammed arbitrarily * often without introducing error. Given the low cost of implementing such a * timestamp-compare register (and the tangible benefit of eliminating * discrete timer parts), it is reasonable to expect that future chip * architectures will adopt this feature. * * The cyclic subsystem has been designed to take advantage of chip * architectures with the capacity to interrupt based on absolute, high * resolution values of time. * * Subsystem Overview * * The cyclic subsystem is a low-level kernel subsystem designed to provide * arbitrarily high resolution, per-CPU interval timers (to avoid colliding * with existing terms, we dub such an interval timer a "cyclic"). Cyclics * can be specified to fire at high, lock or low interrupt level, and may be * optionally bound to a CPU or a CPU partition. A cyclic's CPU or CPU * partition binding may be changed dynamically; the cyclic will be "juggled" * to a CPU which satisfies the new binding. Alternatively, a cyclic may * be specified to be "omnipresent", denoting firing on all online CPUs. * * Cyclic Subsystem Interface Overview * ----------------------------------- * * The cyclic subsystem has interfaces with the kernel at-large, with other * kernel subsystems (e.g. the processor management subsystem, the checkpoint * resume subsystem) and with the platform (the cyclic backend). Each * of these interfaces is given a brief synopsis here, and is described * in full above the interface's implementation. * * The following diagram displays the cyclic subsystem's interfaces to * other kernel components. The arrows denote a "calls" relationship, with * the large arrow indicating the cyclic subsystem's consumer interface. * Each arrow is labeled with the section in which the corresponding * interface is described. * * Kernel at-large consumers * -----------++------------ * || * || * _||_ * \ / * \/ * +---------------------+ * | | * | Cyclic subsystem |<----------- Other kernel subsystems * | | * +---------------------+ * ^ | * | | * | | * | v * +---------------------+ * | | * | Cyclic backend | * | (platform specific) | * | | * +---------------------+ * * * Kernel At-Large Interfaces * * cyclic_add() <-- Creates a cyclic * cyclic_add_omni() <-- Creates an omnipresent cyclic * cyclic_remove() <-- Removes a cyclic * cyclic_bind() <-- Change a cyclic's CPU or partition binding * cyclic_reprogram() <-- Reprogram a cyclic's expiration * * Inter-subsystem Interfaces * * cyclic_juggle() <-- Juggles cyclics away from a CPU * cyclic_offline() <-- Offlines cyclic operation on a CPU * cyclic_online() <-- Reenables operation on an offlined CPU * cyclic_move_in() <-- Notifies subsystem of change in CPU partition * cyclic_move_out() <-- Notifies subsystem of change in CPU partition * cyclic_suspend() <-- Suspends the cyclic subsystem on all CPUs * cyclic_resume() <-- Resumes the cyclic subsystem on all CPUs * * Backend Interfaces * * cyclic_init() <-- Initializes the cyclic subsystem * cyclic_fire() <-- CY_HIGH_LEVEL interrupt entry point * cyclic_softint() <-- CY_LOCK/LOW_LEVEL soft interrupt entry point * * The backend-supplied interfaces (through the cyc_backend structure) are * documented in detail in * * * Cyclic Subsystem Implementation Overview * ---------------------------------------- * * The cyclic subsystem is designed to minimize interference between cyclics * on different CPUs. Thus, all of the cyclic subsystem's data structures * hang off of a per-CPU structure, cyc_cpu. * * Each cyc_cpu has a power-of-two sized array of cyclic structures (the * cyp_cyclics member of the cyc_cpu structure). If cyclic_add() is called * and there does not exist a free slot in the cyp_cyclics array, the size of * the array will be doubled. The array will never shrink. Cyclics are * referred to by their index in the cyp_cyclics array, which is of type * cyc_index_t. * * The cyclics are kept sorted by expiration time in the cyc_cpu's heap. The * heap is keyed by cyclic expiration time, with parents expiring earlier * than their children. * * Heap Management * * The heap is managed primarily by cyclic_fire(). Upon entry, cyclic_fire() * compares the root cyclic's expiration time to the current time. If the * expiration time is in the past, cyclic_expire() is called on the root * cyclic. Upon return from cyclic_expire(), the cyclic's new expiration time * is derived by adding its interval to its old expiration time, and a * downheap operation is performed. After the downheap, cyclic_fire() * examines the (potentially changed) root cyclic, repeating the * cyclic_expire()/add interval/cyclic_downheap() sequence until the root * cyclic has an expiration time in the future. This expiration time * (guaranteed to be the earliest in the heap) is then communicated to the * backend via cyb_reprogram. Optimal backends will next call cyclic_fire() * shortly after the root cyclic's expiration time. * * To allow efficient, deterministic downheap operations, we implement the * heap as an array (the cyp_heap member of the cyc_cpu structure), with each * element containing an index into the CPU's cyp_cyclics array. * * The heap is laid out in the array according to the following: * * 1. The root of the heap is always in the 0th element of the heap array * 2. The left and right children of the nth element are element * (((n + 1) << 1) - 1) and element ((n + 1) << 1), respectively. * * This layout is standard (see, e.g., Cormen's "Algorithms"); the proof * that these constraints correctly lay out a heap (or indeed, any binary * tree) is trivial and left to the reader. * * To see the heap by example, assume our cyclics array has the following * members (at time t): * * cy_handler cy_level cy_expire * --------------------------------------------- * [ 0] clock() LOCK t+10000000 * [ 1] deadman() HIGH t+1000000000 * [ 2] clock_highres_fire() LOW t+100 * [ 3] clock_highres_fire() LOW t+1000 * [ 4] clock_highres_fire() LOW t+500 * [ 5] (free) -- -- * [ 6] (free) -- -- * [ 7] (free) -- -- * * The heap array could be: * * [0] [1] [2] [3] [4] [5] [6] [7] * +-----+-----+-----+-----+-----+-----+-----+-----+ * | | | | | | | | | * | 2 | 3 | 4 | 0 | 1 | x | x | x | * | | | | | | | | | * +-----+-----+-----+-----+-----+-----+-----+-----+ * * Graphically, this array corresponds to the following (excuse the ASCII art): * * 2 * | * +------------------+------------------+ * 3 4 * | * +---------+--------+ * 0 1 * * Note that the heap is laid out by layer: all nodes at a given depth are * stored in consecutive elements of the array. Moreover, layers of * consecutive depths are in adjacent element ranges. This property * guarantees high locality of reference during downheap operations. * Specifically, we are guaranteed that we can downheap to a depth of * * lg (cache_line_size / sizeof (cyc_index_t)) * * nodes with at most one cache miss. On UltraSPARC (64 byte e-cache line * size), this corresponds to a depth of four nodes. Thus, if there are * fewer than sixteen cyclics in the heap, downheaps on UltraSPARC miss at * most once in the e-cache. * * Downheaps are required to compare siblings as they proceed down the * heap. For downheaps proceeding beyond the one-cache-miss depth, every * access to a left child could potentially miss in the cache. However, * if we assume * * (cache_line_size / sizeof (cyc_index_t)) > 2, * * then all siblings are guaranteed to be on the same cache line. Thus, the * miss on the left child will guarantee a hit on the right child; downheaps * will incur at most one cache miss per layer beyond the one-cache-miss * depth. The total number of cache misses for heap management during a * downheap operation is thus bounded by * * lg (n) - lg (cache_line_size / sizeof (cyc_index_t)) * * Traditional pointer-based heaps are implemented without regard to * locality. Downheaps can thus incur two cache misses per layer (one for * each child), but at most one cache miss at the root. This yields a bound * of * * 2 * lg (n) - 1 * * on the total cache misses. * * This difference may seem theoretically trivial (the difference is, after * all, constant), but can become substantial in practice -- especially for * caches with very large cache lines and high miss penalties (e.g. TLBs). * * Heaps must always be full, balanced trees. Heap management must therefore * track the next point-of-insertion into the heap. In pointer-based heaps, * recomputing this point takes O(lg (n)). Given the layout of the * array-based implementation, however, the next point-of-insertion is * always: * * heap[number_of_elements] * * We exploit this property by implementing the free-list in the usused * heap elements. Heap insertion, therefore, consists only of filling in * the cyclic at cyp_cyclics[cyp_heap[number_of_elements]], incrementing * the number of elements, and performing an upheap. Heap deletion consists * of decrementing the number of elements, swapping the to-be-deleted element * with the element at cyp_heap[number_of_elements], and downheaping. * * Filling in more details in our earlier example: * * +--- free list head * | * V * * [0] [1] [2] [3] [4] [5] [6] [7] * +-----+-----+-----+-----+-----+-----+-----+-----+ * | | | | | | | | | * | 2 | 3 | 4 | 0 | 1 | 5 | 6 | 7 | * | | | | | | | | | * +-----+-----+-----+-----+-----+-----+-----+-----+ * * To insert into this heap, we would just need to fill in the cyclic at * cyp_cyclics[5], bump the number of elements (from 5 to 6) and perform * an upheap. * * If we wanted to remove, say, cyp_cyclics[3], we would first scan for it * in the cyp_heap, and discover it at cyp_heap[1]. We would then decrement * the number of elements (from 5 to 4), swap cyp_heap[1] with cyp_heap[4], * and perform a downheap from cyp_heap[1]. The linear scan is required * because the cyclic does not keep a backpointer into the heap. This makes * heap manipulation (e.g. downheaps) faster at the expense of removal * operations. * * Expiry processing * * As alluded to above, cyclic_expire() is called by cyclic_fire() at * CY_HIGH_LEVEL to expire a cyclic. Cyclic subsystem consumers are * guaranteed that for an arbitrary time t in the future, their cyclic * handler will have been called (t - cyt_when) / cyt_interval times. Thus, * there must be a one-to-one mapping between a cyclic's expiration at * CY_HIGH_LEVEL and its execution at the desired level (either CY_HIGH_LEVEL, * CY_LOCK_LEVEL or CY_LOW_LEVEL). * * For CY_HIGH_LEVEL cyclics, this is trivial; cyclic_expire() simply needs * to call the handler. * * For CY_LOCK_LEVEL and CY_LOW_LEVEL cyclics, however, there exists a * potential disconnect: if the CPU is at an interrupt level less than * CY_HIGH_LEVEL but greater than the level of a cyclic for a period of * time longer than twice the cyclic's interval, the cyclic will be expired * twice before it can be handled. * * To maintain the one-to-one mapping, we track the difference between the * number of times a cyclic has been expired and the number of times it's * been handled in a "pending count" (the cy_pend field of the cyclic * structure). cyclic_expire() thus increments the cy_pend count for the * expired cyclic and posts a soft interrupt at the desired level. In the * cyclic subsystem's soft interrupt handler, cyclic_softint(), we repeatedly * call the cyclic handler and decrement cy_pend until we have decremented * cy_pend to zero. * * The Producer/Consumer Buffer * * If we wish to avoid a linear scan of the cyclics array at soft interrupt * level, cyclic_softint() must be able to quickly determine which cyclics * have a non-zero cy_pend count. We thus introduce a per-soft interrupt * level producer/consumer buffer shared with CY_HIGH_LEVEL. These buffers * are encapsulated in the cyc_pcbuffer structure, and, like cyp_heap, are * implemented as cyc_index_t arrays (the cypc_buf member of the cyc_pcbuffer * structure). * * The producer (cyclic_expire() running at CY_HIGH_LEVEL) enqueues a cyclic * by storing the cyclic's index to cypc_buf[cypc_prodndx] and incrementing * cypc_prodndx. The consumer (cyclic_softint() running at either * CY_LOCK_LEVEL or CY_LOW_LEVEL) dequeues a cyclic by loading from * cypc_buf[cypc_consndx] and bumping cypc_consndx. The buffer is empty when * cypc_prodndx == cypc_consndx. * * To bound the size of the producer/consumer buffer, cyclic_expire() only * enqueues a cyclic if its cy_pend was zero (if the cyclic's cy_pend is * non-zero, cyclic_expire() only bumps cy_pend). Symmetrically, * cyclic_softint() only consumes a cyclic after it has decremented the * cy_pend count to zero. * * Returning to our example, here is what the CY_LOW_LEVEL producer/consumer * buffer might look like: * * cypc_consndx ---+ +--- cypc_prodndx * | | * V V * * [0] [1] [2] [3] [4] [5] [6] [7] * +-----+-----+-----+-----+-----+-----+-----+-----+ * | | | | | | | | | * | x | x | 3 | 2 | 4 | x | x | x | <== cypc_buf * | | | . | . | . | | | | * +-----+-----+- | -+- | -+- | -+-----+-----+-----+ * | | | * | | | cy_pend cy_handler * | | | ------------------------- * | | | [ 0] 1 clock() * | | | [ 1] 0 deadman() * | +---- | -------> [ 2] 3 clock_highres_fire() * +---------- | -------> [ 3] 1 clock_highres_fire() * +--------> [ 4] 1 clock_highres_fire() * [ 5] - (free) * [ 6] - (free) * [ 7] - (free) * * In particular, note that clock()'s cy_pend is 1 but that it is _not_ in * this producer/consumer buffer; it would be enqueued in the CY_LOCK_LEVEL * producer/consumer buffer. * * Locking * * Traditionally, access to per-CPU data structures shared between * interrupt levels is serialized by manipulating programmable interrupt * level: readers and writers are required to raise their interrupt level * to that of the highest level writer. * * For the producer/consumer buffers (shared between cyclic_fire()/ * cyclic_expire() executing at CY_HIGH_LEVEL and cyclic_softint() executing * at one of CY_LOCK_LEVEL or CY_LOW_LEVEL), forcing cyclic_softint() to raise * programmable interrupt level is undesirable: aside from the additional * latency incurred by manipulating interrupt level in the hot cy_pend * processing path, this would create the potential for soft level cy_pend * processing to delay CY_HIGH_LEVEL firing and expiry processing. * CY_LOCK/LOW_LEVEL cyclics could thereby induce jitter in CY_HIGH_LEVEL * cyclics. * * To minimize jitter, then, we would like the cyclic_fire()/cyclic_expire() * and cyclic_softint() code paths to be lock-free. * * For cyclic_fire()/cyclic_expire(), lock-free execution is straightforward: * because these routines execute at a higher interrupt level than * cyclic_softint(), their actions on the producer/consumer buffer appear * atomic. In particular, the increment of cy_pend appears to occur * atomically with the increment of cypc_prodndx. * * For cyclic_softint(), however, lock-free execution requires more delicacy. * When cyclic_softint() discovers a cyclic in the producer/consumer buffer, * it calls the cyclic's handler and attempts to atomically decrement the * cy_pend count with a compare&swap operation. * * If the compare&swap operation succeeds, cyclic_softint() behaves * conditionally based on the value it atomically wrote to cy_pend: * * - If the cy_pend was decremented to 0, the cyclic has been consumed; * cyclic_softint() increments the cypc_consndx and checks for more * enqueued work. * * - If the count was decremented to a non-zero value, there is more work * to be done on the cyclic; cyclic_softint() calls the cyclic handler * and repeats the atomic decrement process. * * If the compare&swap operation fails, cyclic_softint() knows that * cyclic_expire() has intervened and bumped the cy_pend count (resizes * and removals complicate this, however -- see the sections on their * operation, below). cyclic_softint() thus reloads cy_pend, and re-attempts * the atomic decrement. * * Recall that we bound the size of the producer/consumer buffer by * having cyclic_expire() only enqueue the specified cyclic if its * cy_pend count is zero; this assures that each cyclic is enqueued at * most once. This leads to a critical constraint on cyclic_softint(), * however: after the compare&swap operation which successfully decrements * cy_pend to zero, cyclic_softint() must _not_ re-examine the consumed * cyclic. In part to obey this constraint, cyclic_softint() calls the * cyclic handler before decrementing cy_pend. * * Resizing * * All of the discussion thus far has assumed a static number of cyclics. * Obviously, static limitations are not practical; we need the capacity * to resize our data structures dynamically. * * We resize our data structures lazily, and only on a per-CPU basis. * The size of the data structures always doubles and never shrinks. We * serialize adds (and thus resizes) on cpu_lock; we never need to deal * with concurrent resizes. Resizes should be rare; they may induce jitter * on the CPU being resized, but should not affect cyclic operation on other * CPUs. Pending cyclics may not be dropped during a resize operation. * * Three key cyc_cpu data structures need to be resized: the cyclics array, * the heap array and the producer/consumer buffers. Resizing the first two * is relatively straightforward: * * 1. The new, larger arrays are allocated in cyclic_expand() (called * from cyclic_add()). * 2. cyclic_expand() cross calls cyclic_expand_xcall() on the CPU * undergoing the resize. * 3. cyclic_expand_xcall() raises interrupt level to CY_HIGH_LEVEL * 4. The contents of the old arrays are copied into the new arrays. * 5. The old cyclics array is bzero()'d * 6. The pointers are updated. * * The producer/consumer buffer is dicier: cyclic_expand_xcall() may have * interrupted cyclic_softint() in the middle of consumption. To resize the * producer/consumer buffer, we implement up to two buffers per soft interrupt * level: a hard buffer (the buffer being produced into by cyclic_expire()) * and a soft buffer (the buffer from which cyclic_softint() is consuming). * During normal operation, the hard buffer and soft buffer point to the * same underlying producer/consumer buffer. * * During a resize, however, cyclic_expand_xcall() changes the hard buffer * to point to the new, larger producer/consumer buffer; all future * cyclic_expire()'s will produce into the new buffer. cyclic_expand_xcall() * then posts a CY_LOCK_LEVEL soft interrupt, landing in cyclic_softint(). * * As under normal operation, cyclic_softint() will consume cyclics from * its soft buffer. After the soft buffer is drained, however, * cyclic_softint() will see that the hard buffer has changed. At that time, * cyclic_softint() will change its soft buffer to point to the hard buffer, * and repeat the producer/consumer buffer draining procedure. * * After the new buffer is drained, cyclic_softint() will determine if both * soft levels have seen their new producer/consumer buffer. If both have, * cyclic_softint() will post on the semaphore cyp_modify_wait. If not, a * soft interrupt will be generated for the remaining level. * * cyclic_expand() blocks on the cyp_modify_wait semaphore (a semaphore is * used instead of a condition variable because of the race between the * sema_p() in cyclic_expand() and the sema_v() in cyclic_softint()). This * allows cyclic_expand() to know when the resize operation is complete; * all of the old buffers (the heap, the cyclics array and the producer/ * consumer buffers) can be freed. * * A final caveat on resizing: we described step (5) in the * cyclic_expand_xcall() procedure without providing any motivation. This * step addresses the problem of a cyclic_softint() attempting to decrement * a cy_pend count while interrupted by a cyclic_expand_xcall(). Because * cyclic_softint() has already called the handler by the time cy_pend is * decremented, we want to assure that it doesn't decrement a cy_pend * count in the old cyclics array. By zeroing the old cyclics array in * cyclic_expand_xcall(), we are zeroing out every cy_pend count; when * cyclic_softint() attempts to compare&swap on the cy_pend count, it will * fail and recognize that the count has been zeroed. cyclic_softint() will * update its stale copy of the cyp_cyclics pointer, re-read the cy_pend * count from the new cyclics array, and re-attempt the compare&swap. * * Removals * * Cyclic removals should be rare. To simplify the implementation (and to * allow optimization for the cyclic_fire()/cyclic_expire()/cyclic_softint() * path), we force removals and adds to serialize on cpu_lock. * * Cyclic removal is complicated by a guarantee made to the consumer of * the cyclic subsystem: after cyclic_remove() returns, the cyclic handler * has returned and will never again be called. * * Here is the procedure for cyclic removal: * * 1. cyclic_remove() calls cyclic_remove_xcall() on the CPU undergoing * the removal. * 2. cyclic_remove_xcall() raises interrupt level to CY_HIGH_LEVEL * 3. The current expiration time for the removed cyclic is recorded. * 4. If the cy_pend count on the removed cyclic is non-zero, it * is copied into cyp_rpend and subsequently zeroed. * 5. The cyclic is removed from the heap * 6. If the root of the heap has changed, the backend is reprogrammed. * 7. If the cy_pend count was non-zero cyclic_remove() blocks on the * cyp_modify_wait semaphore. * * The motivation for step (3) is explained in "Juggling", below. * * The cy_pend count is decremented in cyclic_softint() after the cyclic * handler returns. Thus, if we find a cy_pend count of zero in step * (4), we know that cyclic_remove() doesn't need to block. * * If the cy_pend count is non-zero, however, we must block in cyclic_remove() * until cyclic_softint() has finished calling the cyclic handler. To let * cyclic_softint() know that this cyclic has been removed, we zero the * cy_pend count. This will cause cyclic_softint()'s compare&swap to fail. * When cyclic_softint() sees the zero cy_pend count, it knows that it's been * caught during a resize (see "Resizing", above) or that the cyclic has been * removed. In the latter case, it calls cyclic_remove_pend() to call the * cyclic handler cyp_rpend - 1 times, and posts on cyp_modify_wait. * * Juggling * * At first glance, cyclic juggling seems to be a difficult problem. The * subsystem must guarantee that a cyclic doesn't execute simultaneously on * different CPUs, while also assuring that a cyclic fires exactly once * per interval. We solve this problem by leveraging a property of the * platform: gethrtime() is required to increase in lock-step across * multiple CPUs. Therefore, to juggle a cyclic, we remove it from its * CPU, recording its expiration time in the remove cross call (step (3) * in "Removing", above). We then add the cyclic to the new CPU, explicitly * setting its expiration time to the time recorded in the removal. This * leverages the existing cyclic expiry processing, which will compensate * for any time lost while juggling. * * Reprogramming * * Normally, after a cyclic fires, its next expiration is computed from * the current time and the cyclic interval. But there are situations when * the next expiration needs to be reprogrammed by the kernel subsystem that * is using the cyclic. cyclic_reprogram() allows this to be done. This, * unlike the other kernel at-large cyclic API functions, is permitted to * be called from the cyclic handler. This is because it does not use the * cpu_lock to serialize access. * * When cyclic_reprogram() is called for an omni-cyclic, the operation is * applied to the omni-cyclic's component on the current CPU. * * If a high-level cyclic handler reprograms its own cyclic, then * cyclic_fire() detects that and does not recompute the cyclic's next * expiration. However, for a lock-level or a low-level cyclic, the * actual cyclic handler will execute at the lower PIL only after * cyclic_fire() is done with all expired cyclics. To deal with this, such * cyclics can be specified with a special interval of CY_INFINITY (INT64_MAX). * cyclic_fire() recognizes this special value and recomputes the next * expiration to CY_INFINITY. This effectively moves the cyclic to the * bottom of the heap and prevents it from going off until its handler has * had a chance to reprogram it. Infact, this is the way to create and reuse * "one-shot" timers in the context of the cyclic subsystem without using * cyclic_remove(). * * Here is the procedure for cyclic reprogramming: * * 1. cyclic_reprogram() calls cyclic_reprogram_xcall() on the CPU * that houses the cyclic. * 2. cyclic_reprogram_xcall() raises interrupt level to CY_HIGH_LEVEL * 3. The cyclic is located in the cyclic heap. The search for this is * done from the bottom of the heap to the top as reprogrammable cyclics * would be located closer to the bottom than the top. * 4. The cyclic expiration is set and the cyclic is moved to its * correct position in the heap (up or down depending on whether the * new expiration is less than or greater than the old one). * 5. If the cyclic move modified the root of the heap, the backend is * reprogrammed. * * Reprogramming can be a frequent event (see the callout subsystem). So, * the serialization used has to be efficient. As with all other cyclic * operations, the interrupt level is raised during reprogramming. Plus, * during reprogramming, the cyclic must not be juggled (regular cyclic) * or stopped (omni-cyclic). The implementation defines a per-cyclic * reader-writer lock to accomplish this. This lock is acquired in the * reader mode by cyclic_reprogram() and writer mode by cyclic_juggle() and * cyclic_omni_stop(). The reader-writer lock makes it efficient if * an omni-cyclic is reprogrammed on different CPUs frequently. * * Note that since the cpu_lock is not used during reprogramming, it is * the responsibility of the user of the reprogrammable cyclic to make sure * that the cyclic is not removed via cyclic_remove() during reprogramming. * This is not an unreasonable requirement as the user will typically have * some sort of synchronization for its cyclic-related activities. This * little caveat exists because the cyclic ID is not really an ID. It is * implemented as a pointer to a structure. */ #include #include #include #include #include #include #include #include #ifdef CYCLIC_TRACE /* * cyc_trace_enabled is for the benefit of kernel debuggers. */ int cyc_trace_enabled = 1; static cyc_tracebuf_t cyc_ptrace; static cyc_coverage_t cyc_coverage[CY_NCOVERAGE]; /* * Seen this anywhere? */ static uint_t cyclic_coverage_hash(char *p) { unsigned int g; uint_t hval; hval = 0; while (*p) { hval = (hval << 4) + *p++; if ((g = (hval & 0xf0000000)) != 0) hval ^= g >> 24; hval &= ~g; } return (hval); } static void cyclic_coverage(char *why, int level, uint64_t arg0, uint64_t arg1) { uint_t ndx, orig; for (ndx = orig = cyclic_coverage_hash(why) % CY_NCOVERAGE; ; ) { if (cyc_coverage[ndx].cyv_why == why) break; if (cyc_coverage[ndx].cyv_why != NULL || atomic_cas_ptr(&cyc_coverage[ndx].cyv_why, NULL, why) != NULL) { if (++ndx == CY_NCOVERAGE) ndx = 0; if (ndx == orig) panic("too many cyclic coverage points"); continue; } /* * If we're here, we have successfully swung our guy into * the position at "ndx". */ break; } if (level == CY_PASSIVE_LEVEL) cyc_coverage[ndx].cyv_passive_count++; else cyc_coverage[ndx].cyv_count[level]++; cyc_coverage[ndx].cyv_arg0 = arg0; cyc_coverage[ndx].cyv_arg1 = arg1; } #define CYC_TRACE(cpu, level, why, arg0, arg1) \ CYC_TRACE_IMPL(&cpu->cyp_trace[level], level, why, arg0, arg1) #define CYC_PTRACE(why, arg0, arg1) \ CYC_TRACE_IMPL(&cyc_ptrace, CY_PASSIVE_LEVEL, why, arg0, arg1) #define CYC_TRACE_IMPL(buf, level, why, a0, a1) { \ if (panicstr == NULL) { \ int _ndx = (buf)->cyt_ndx; \ cyc_tracerec_t *_rec = &(buf)->cyt_buf[_ndx]; \ (buf)->cyt_ndx = (++_ndx == CY_NTRACEREC) ? 0 : _ndx; \ _rec->cyt_tstamp = gethrtime_unscaled(); \ _rec->cyt_why = (why); \ _rec->cyt_arg0 = (uint64_t)(uintptr_t)(a0); \ _rec->cyt_arg1 = (uint64_t)(uintptr_t)(a1); \ cyclic_coverage(why, level, \ (uint64_t)(uintptr_t)(a0), (uint64_t)(uintptr_t)(a1)); \ } \ } #else static int cyc_trace_enabled = 0; #define CYC_TRACE(cpu, level, why, arg0, arg1) #define CYC_PTRACE(why, arg0, arg1) #endif #define CYC_TRACE0(cpu, level, why) CYC_TRACE(cpu, level, why, 0, 0) #define CYC_TRACE1(cpu, level, why, arg0) CYC_TRACE(cpu, level, why, arg0, 0) #define CYC_PTRACE0(why) CYC_PTRACE(why, 0, 0) #define CYC_PTRACE1(why, arg0) CYC_PTRACE(why, arg0, 0) static kmem_cache_t *cyclic_id_cache; static cyc_id_t *cyclic_id_head; static hrtime_t cyclic_resolution; static cyc_backend_t cyclic_backend; /* * Returns 1 if the upheap propagated to the root, 0 if it did not. This * allows the caller to reprogram the backend only when the root has been * modified. */ static int cyclic_upheap(cyc_cpu_t *cpu, cyc_index_t ndx) { cyclic_t *cyclics; cyc_index_t *heap; cyc_index_t heap_parent, heap_current = ndx; cyc_index_t parent, current; if (heap_current == 0) return (1); heap = cpu->cyp_heap; cyclics = cpu->cyp_cyclics; heap_parent = CYC_HEAP_PARENT(heap_current); for (;;) { current = heap[heap_current]; parent = heap[heap_parent]; /* * We have an expiration time later than our parent; we're * done. */ if (cyclics[current].cy_expire >= cyclics[parent].cy_expire) return (0); /* * We need to swap with our parent, and continue up the heap. */ heap[heap_parent] = current; heap[heap_current] = parent; /* * If we just reached the root, we're done. */ if (heap_parent == 0) return (1); heap_current = heap_parent; heap_parent = CYC_HEAP_PARENT(heap_current); } } static void cyclic_downheap(cyc_cpu_t *cpu, cyc_index_t ndx) { cyclic_t *cyclics = cpu->cyp_cyclics; cyc_index_t *heap = cpu->cyp_heap; cyc_index_t heap_left, heap_right, heap_me = ndx; cyc_index_t left, right, me; cyc_index_t nelems = cpu->cyp_nelems; for (;;) { /* * If we don't have a left child (i.e., we're a leaf), we're * done. */ if ((heap_left = CYC_HEAP_LEFT(heap_me)) >= nelems) return; left = heap[heap_left]; me = heap[heap_me]; heap_right = CYC_HEAP_RIGHT(heap_me); /* * Even if we don't have a right child, we still need to compare * our expiration time against that of our left child. */ if (heap_right >= nelems) goto comp_left; right = heap[heap_right]; /* * We have both a left and a right child. We need to compare * the expiration times of the children to determine which * expires earlier. */ if (cyclics[right].cy_expire < cyclics[left].cy_expire) { /* * Our right child is the earlier of our children. * We'll now compare our expiration time to its; if * ours is the earlier, we're done. */ if (cyclics[me].cy_expire <= cyclics[right].cy_expire) return; /* * Our right child expires earlier than we do; swap * with our right child, and descend right. */ heap[heap_right] = me; heap[heap_me] = right; heap_me = heap_right; continue; } comp_left: /* * Our left child is the earlier of our children (or we have * no right child). We'll now compare our expiration time * to its; if ours is the earlier, we're done. */ if (cyclics[me].cy_expire <= cyclics[left].cy_expire) return; /* * Our left child expires earlier than we do; swap with our * left child, and descend left. */ heap[heap_left] = me; heap[heap_me] = left; heap_me = heap_left; } } static void cyclic_expire(cyc_cpu_t *cpu, cyc_index_t ndx, cyclic_t *cyclic) { cyc_backend_t *be = cpu->cyp_backend; cyc_level_t level = cyclic->cy_level; /* * If this is a CY_HIGH_LEVEL cyclic, just call the handler; we don't * need to worry about the pend count for CY_HIGH_LEVEL cyclics. */ if (level == CY_HIGH_LEVEL) { cyc_func_t handler = cyclic->cy_handler; void *arg = cyclic->cy_arg; CYC_TRACE(cpu, CY_HIGH_LEVEL, "handler-in", handler, arg); DTRACE_PROBE1(cyclic__start, cyclic_t *, cyclic); (*handler)(arg); DTRACE_PROBE1(cyclic__end, cyclic_t *, cyclic); CYC_TRACE(cpu, CY_HIGH_LEVEL, "handler-out", handler, arg); return; } /* * We're at CY_HIGH_LEVEL; this modification to cy_pend need not * be atomic (the high interrupt level assures that it will appear * atomic to any softint currently running). */ if (cyclic->cy_pend++ == 0) { cyc_softbuf_t *softbuf = &cpu->cyp_softbuf[level]; cyc_pcbuffer_t *pc = &softbuf->cys_buf[softbuf->cys_hard]; /* * We need to enqueue this cyclic in the soft buffer. */ CYC_TRACE(cpu, CY_HIGH_LEVEL, "expire-enq", cyclic, pc->cypc_prodndx); pc->cypc_buf[pc->cypc_prodndx++ & pc->cypc_sizemask] = ndx; ASSERT(pc->cypc_prodndx != pc->cypc_consndx); } else { /* * If the pend count is zero after we incremented it, then * we've wrapped (i.e. we had a cy_pend count of over four * billion. In this case, we clamp the pend count at * UINT32_MAX. Yes, cyclics can be lost in this case. */ if (cyclic->cy_pend == 0) { CYC_TRACE1(cpu, CY_HIGH_LEVEL, "expire-wrap", cyclic); cyclic->cy_pend = UINT32_MAX; } CYC_TRACE(cpu, CY_HIGH_LEVEL, "expire-bump", cyclic, 0); } be->cyb_softint(be->cyb_arg, cyclic->cy_level); } /* * cyclic_fire(cpu_t *) * * Overview * * cyclic_fire() is the cyclic subsystem's CY_HIGH_LEVEL interrupt handler. * Called by the cyclic backend. * * Arguments and notes * * The only argument is the CPU on which the interrupt is executing; * backends must call into cyclic_fire() on the specified CPU. * * cyclic_fire() may be called spuriously without ill effect. Optimal * backends will call into cyclic_fire() at or shortly after the time * requested via cyb_reprogram(). However, calling cyclic_fire() * arbitrarily late will only manifest latency bubbles; the correctness * of the cyclic subsystem does not rely on the timeliness of the backend. * * cyclic_fire() is wait-free; it will not block or spin. * * Return values * * None. * * Caller's context * * cyclic_fire() must be called from CY_HIGH_LEVEL interrupt context. */ void cyclic_fire(cpu_t *c) { cyc_cpu_t *cpu = c->cpu_cyclic; cyc_backend_t *be = cpu->cyp_backend; cyc_index_t *heap = cpu->cyp_heap; cyclic_t *cyclic, *cyclics = cpu->cyp_cyclics; void *arg = be->cyb_arg; hrtime_t now = gethrtime(); hrtime_t exp; CYC_TRACE(cpu, CY_HIGH_LEVEL, "fire", now, 0); if (cpu->cyp_nelems == 0) { /* * This is a spurious fire. Count it as such, and blow * out of here. */ CYC_TRACE0(cpu, CY_HIGH_LEVEL, "fire-spurious"); return; } for (;;) { cyc_index_t ndx = heap[0]; cyclic = &cyclics[ndx]; ASSERT(!(cyclic->cy_flags & CYF_FREE)); CYC_TRACE(cpu, CY_HIGH_LEVEL, "fire-check", cyclic, cyclic->cy_expire); if ((exp = cyclic->cy_expire) > now) break; cyclic_expire(cpu, ndx, cyclic); /* * If the handler reprogrammed the cyclic, then don't * recompute the expiration. Then, if the interval is * infinity, set the expiration to infinity. This can * be used to create one-shot timers. */ if (exp != cyclic->cy_expire) { /* * If a hi level cyclic reprograms itself, * the heap adjustment and reprogramming of the * clock source have already been done at this * point. So, we can continue. */ continue; } if (cyclic->cy_interval == CY_INFINITY) exp = CY_INFINITY; else exp += cyclic->cy_interval; /* * If this cyclic will be set to next expire in the distant * past, we have one of two situations: * * a) This is the first firing of a cyclic which had * cy_expire set to 0. * * b) We are tragically late for a cyclic -- most likely * due to being in the debugger. * * In either case, we set the new expiration time to be the * the next interval boundary. This assures that the * expiration time modulo the interval is invariant. * * We arbitrarily define "distant" to be one second (one second * is chosen because it's shorter than any foray to the * debugger while still being longer than any legitimate * stretch at CY_HIGH_LEVEL). */ if (now - exp > NANOSEC) { hrtime_t interval = cyclic->cy_interval; CYC_TRACE(cpu, CY_HIGH_LEVEL, exp == interval ? "fire-first" : "fire-swing", now, exp); exp += ((now - exp) / interval + 1) * interval; } cyclic->cy_expire = exp; cyclic_downheap(cpu, 0); } /* * Now we have a cyclic in the root slot which isn't in the past; * reprogram the interrupt source. */ be->cyb_reprogram(arg, exp); } static void cyclic_remove_pend(cyc_cpu_t *cpu, cyc_level_t level, cyclic_t *cyclic) { cyc_func_t handler = cyclic->cy_handler; void *arg = cyclic->cy_arg; uint32_t i, rpend = cpu->cyp_rpend - 1; ASSERT(cyclic->cy_flags & CYF_FREE); ASSERT(cyclic->cy_pend == 0); ASSERT(cpu->cyp_state == CYS_REMOVING); ASSERT(cpu->cyp_rpend > 0); CYC_TRACE(cpu, level, "remove-rpend", cyclic, cpu->cyp_rpend); /* * Note that we only call the handler cyp_rpend - 1 times; this is * to account for the handler call in cyclic_softint(). */ for (i = 0; i < rpend; i++) { CYC_TRACE(cpu, level, "rpend-in", handler, arg); DTRACE_PROBE1(cyclic__start, cyclic_t *, cyclic); (*handler)(arg); DTRACE_PROBE1(cyclic__end, cyclic_t *, cyclic); CYC_TRACE(cpu, level, "rpend-out", handler, arg); } /* * We can now let the remove operation complete. */ sema_v(&cpu->cyp_modify_wait); } /* * cyclic_softint(cpu_t *cpu, cyc_level_t level) * * Overview * * cyclic_softint() is the cyclic subsystem's CY_LOCK_LEVEL and CY_LOW_LEVEL * soft interrupt handler. Called by the cyclic backend. * * Arguments and notes * * The first argument to cyclic_softint() is the CPU on which the interrupt * is executing; backends must call into cyclic_softint() on the specified * CPU. The second argument is the level of the soft interrupt; it must * be one of CY_LOCK_LEVEL or CY_LOW_LEVEL. * * cyclic_softint() will call the handlers for cyclics pending at the * specified level. cyclic_softint() will not return until all pending * cyclics at the specified level have been dealt with; intervening * CY_HIGH_LEVEL interrupts which enqueue cyclics at the specified level * may therefore prolong cyclic_softint(). * * cyclic_softint() never disables interrupts, and, if neither a * cyclic_add() nor a cyclic_remove() is pending on the specified CPU, is * lock-free. This assures that in the common case, cyclic_softint() * completes without blocking, and never starves cyclic_fire(). If either * cyclic_add() or cyclic_remove() is pending, cyclic_softint() may grab * a dispatcher lock. * * While cyclic_softint() is designed for bounded latency, it is obviously * at the mercy of its cyclic handlers. Because cyclic handlers may block * arbitrarily, callers of cyclic_softint() should not rely upon * deterministic completion. * * cyclic_softint() may be called spuriously without ill effect. * * Return value * * None. * * Caller's context * * The caller must be executing in soft interrupt context at either * CY_LOCK_LEVEL or CY_LOW_LEVEL. The level passed to cyclic_softint() * must match the level at which it is executing. On optimal backends, * the caller will hold no locks. In any case, the caller may not hold * cpu_lock or any lock acquired by any cyclic handler or held across * any of cyclic_add(), cyclic_remove(), cyclic_bind() or cyclic_juggle(). */ void cyclic_softint(cpu_t *c, cyc_level_t level) { cyc_cpu_t *cpu = c->cpu_cyclic; cyc_softbuf_t *softbuf; int soft, *buf, consndx, resized = 0, intr_resized = 0; cyc_pcbuffer_t *pc; cyclic_t *cyclics = cpu->cyp_cyclics; int sizemask; CYC_TRACE(cpu, level, "softint", cyclics, 0); ASSERT(level < CY_LOW_LEVEL + CY_SOFT_LEVELS); softbuf = &cpu->cyp_softbuf[level]; top: soft = softbuf->cys_soft; ASSERT(soft == 0 || soft == 1); pc = &softbuf->cys_buf[soft]; buf = pc->cypc_buf; consndx = pc->cypc_consndx; sizemask = pc->cypc_sizemask; CYC_TRACE(cpu, level, "softint-top", cyclics, pc); while (consndx != pc->cypc_prodndx) { uint32_t pend, npend, opend; int consmasked = consndx & sizemask; cyclic_t *cyclic = &cyclics[buf[consmasked]]; cyc_func_t handler = cyclic->cy_handler; void *arg = cyclic->cy_arg; ASSERT(buf[consmasked] < cpu->cyp_size); CYC_TRACE(cpu, level, "consuming", consndx, cyclic); /* * We have found this cyclic in the pcbuffer. We know that * one of the following is true: * * (a) The pend is non-zero. We need to execute the handler * at least once. * * (b) The pend _was_ non-zero, but it's now zero due to a * resize. We will call the handler once, see that we * are in this case, and read the new cyclics buffer * (and hence the old non-zero pend). * * (c) The pend _was_ non-zero, but it's now zero due to a * removal. We will call the handler once, see that we * are in this case, and call into cyclic_remove_pend() * to call the cyclic rpend times. We will take into * account that we have already called the handler once. * * Point is: it's safe to call the handler without first * checking the pend. */ do { CYC_TRACE(cpu, level, "handler-in", handler, arg); DTRACE_PROBE1(cyclic__start, cyclic_t *, cyclic); (*handler)(arg); DTRACE_PROBE1(cyclic__end, cyclic_t *, cyclic); CYC_TRACE(cpu, level, "handler-out", handler, arg); reread: pend = cyclic->cy_pend; npend = pend - 1; if (pend == 0) { if (cpu->cyp_state == CYS_REMOVING) { /* * This cyclic has been removed while * it had a non-zero pend count (we * know it was non-zero because we * found this cyclic in the pcbuffer). * There must be a non-zero rpend for * this CPU, and there must be a remove * operation blocking; we'll call into * cyclic_remove_pend() to clean this * up, and break out of the pend loop. */ cyclic_remove_pend(cpu, level, cyclic); break; } /* * We must have had a resize interrupt us. */ CYC_TRACE(cpu, level, "resize-int", cyclics, 0); ASSERT(cpu->cyp_state == CYS_EXPANDING); ASSERT(cyclics != cpu->cyp_cyclics); ASSERT(resized == 0); ASSERT(intr_resized == 0); intr_resized = 1; cyclics = cpu->cyp_cyclics; cyclic = &cyclics[buf[consmasked]]; ASSERT(cyclic->cy_handler == handler); ASSERT(cyclic->cy_arg == arg); goto reread; } if ((opend = atomic_cas_32(&cyclic->cy_pend, pend, npend)) != pend) { /* * Our atomic_cas_32 can fail for one of several * reasons: * * (a) An intervening high level bumped up the * pend count on this cyclic. In this * case, we will see a higher pend. * * (b) The cyclics array has been yanked out * from underneath us by a resize * operation. In this case, pend is 0 and * cyp_state is CYS_EXPANDING. * * (c) The cyclic has been removed by an * intervening remove-xcall. In this case, * pend will be 0, the cyp_state will be * CYS_REMOVING, and the cyclic will be * marked CYF_FREE. * * The assertion below checks that we are * in one of the above situations. The * action under all three is to return to * the top of the loop. */ CYC_TRACE(cpu, level, "cas-fail", opend, pend); ASSERT(opend > pend || (opend == 0 && ((cyclics != cpu->cyp_cyclics && cpu->cyp_state == CYS_EXPANDING) || (cpu->cyp_state == CYS_REMOVING && (cyclic->cy_flags & CYF_FREE))))); goto reread; } /* * Okay, so we've managed to successfully decrement * pend. If we just decremented the pend to 0, we're * done. */ } while (npend > 0); pc->cypc_consndx = ++consndx; } /* * If the high level handler is no longer writing to the same * buffer, then we've had a resize. We need to switch our soft * index, and goto top. */ if (soft != softbuf->cys_hard) { /* * We can assert that the other buffer has grown by exactly * one factor of two. */ CYC_TRACE(cpu, level, "buffer-grow", 0, 0); ASSERT(cpu->cyp_state == CYS_EXPANDING); ASSERT(softbuf->cys_buf[softbuf->cys_hard].cypc_sizemask == (softbuf->cys_buf[soft].cypc_sizemask << 1) + 1 || softbuf->cys_buf[soft].cypc_sizemask == 0); ASSERT(softbuf->cys_hard == (softbuf->cys_soft ^ 1)); /* * If our cached cyclics pointer doesn't match cyp_cyclics, * then we took a resize between our last iteration of the * pend loop and the check against softbuf->cys_hard. */ if (cpu->cyp_cyclics != cyclics) { CYC_TRACE1(cpu, level, "resize-int-int", consndx); cyclics = cpu->cyp_cyclics; } softbuf->cys_soft = softbuf->cys_hard; ASSERT(resized == 0); resized = 1; goto top; } /* * If we were interrupted by a resize operation, then we must have * seen the hard index change. */ ASSERT(!(intr_resized == 1 && resized == 0)); if (resized) { uint32_t lev, nlev; ASSERT(cpu->cyp_state == CYS_EXPANDING); do { lev = cpu->cyp_modify_levels; nlev = lev + 1; } while (atomic_cas_32(&cpu->cyp_modify_levels, lev, nlev) != lev); /* * If we are the last soft level to see the modification, * post on cyp_modify_wait. Otherwise, (if we're not * already at low level), post down to the next soft level. */ if (nlev == CY_SOFT_LEVELS) { CYC_TRACE0(cpu, level, "resize-kick"); sema_v(&cpu->cyp_modify_wait); } else { ASSERT(nlev < CY_SOFT_LEVELS); if (level != CY_LOW_LEVEL) { cyc_backend_t *be = cpu->cyp_backend; CYC_TRACE0(cpu, level, "resize-post"); be->cyb_softint(be->cyb_arg, level - 1); } } } } static void cyclic_expand_xcall(cyc_xcallarg_t *arg) { cyc_cpu_t *cpu = arg->cyx_cpu; cyc_backend_t *be = cpu->cyp_backend; cyb_arg_t bar = be->cyb_arg; cyc_cookie_t cookie; cyc_index_t new_size = arg->cyx_size, size = cpu->cyp_size, i; cyc_index_t *new_heap = arg->cyx_heap; cyclic_t *cyclics = cpu->cyp_cyclics, *new_cyclics = arg->cyx_cyclics; ASSERT(cpu->cyp_state == CYS_EXPANDING); /* * This is a little dicey. First, we'll raise our interrupt level * to CY_HIGH_LEVEL. This CPU already has a new heap, cyclic array, * etc.; we just need to bcopy them across. As for the softint * buffers, we'll switch the active buffers. The actual softints will * take care of consuming any pending cyclics in the old buffer. */ cookie = be->cyb_set_level(bar, CY_HIGH_LEVEL); CYC_TRACE(cpu, CY_HIGH_LEVEL, "expand", new_size, 0); /* * Assert that the new size is a power of 2. */ ASSERT((new_size & new_size - 1) == 0); ASSERT(new_size == (size << 1)); ASSERT(cpu->cyp_heap != NULL && cpu->cyp_cyclics != NULL); bcopy(cpu->cyp_heap, new_heap, sizeof (cyc_index_t) * size); bcopy(cyclics, new_cyclics, sizeof (cyclic_t) * size); /* * Now run through the old cyclics array, setting pend to 0. To * softints (which are executing at a lower priority level), the * pends dropping to 0 will appear atomic with the cyp_cyclics * pointer changing. */ for (i = 0; i < size; i++) cyclics[i].cy_pend = 0; /* * Set up the free list, and set all of the new cyclics to be CYF_FREE. */ for (i = size; i < new_size; i++) { new_heap[i] = i; new_cyclics[i].cy_flags = CYF_FREE; } /* * We can go ahead and plow the value of cyp_heap and cyp_cyclics; * cyclic_expand() has kept a copy. */ cpu->cyp_heap = new_heap; cpu->cyp_cyclics = new_cyclics; cpu->cyp_size = new_size; /* * We've switched over the heap and the cyclics array. Now we need * to switch over our active softint buffer pointers. */ for (i = CY_LOW_LEVEL; i < CY_LOW_LEVEL + CY_SOFT_LEVELS; i++) { cyc_softbuf_t *softbuf = &cpu->cyp_softbuf[i]; uchar_t hard = softbuf->cys_hard; /* * Assert that we're not in the middle of a resize operation. */ ASSERT(hard == softbuf->cys_soft); ASSERT(hard == 0 || hard == 1); ASSERT(softbuf->cys_buf[hard].cypc_buf != NULL); softbuf->cys_hard = hard ^ 1; /* * The caller (cyclic_expand()) is responsible for setting * up the new producer-consumer buffer; assert that it's * been done correctly. */ ASSERT(softbuf->cys_buf[hard ^ 1].cypc_buf != NULL); ASSERT(softbuf->cys_buf[hard ^ 1].cypc_prodndx == 0); ASSERT(softbuf->cys_buf[hard ^ 1].cypc_consndx == 0); } /* * That's all there is to it; now we just need to postdown to * get the softint chain going. */ be->cyb_softint(bar, CY_HIGH_LEVEL - 1); be->cyb_restore_level(bar, cookie); } /* * cyclic_expand() will cross call onto the CPU to perform the actual * expand operation. */ static void cyclic_expand(cyc_cpu_t *cpu) { cyc_index_t new_size, old_size; cyc_index_t *new_heap, *old_heap; cyclic_t *new_cyclics, *old_cyclics; cyc_xcallarg_t arg; cyc_backend_t *be = cpu->cyp_backend; char old_hard; int i; ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(cpu->cyp_state == CYS_ONLINE); cpu->cyp_state = CYS_EXPANDING; old_heap = cpu->cyp_heap; old_cyclics = cpu->cyp_cyclics; if ((new_size = ((old_size = cpu->cyp_size) << 1)) == 0) { new_size = CY_DEFAULT_PERCPU; ASSERT(old_heap == NULL && old_cyclics == NULL); } /* * Check that the new_size is a power of 2. */ ASSERT((new_size - 1 & new_size) == 0); new_heap = kmem_alloc(sizeof (cyc_index_t) * new_size, KM_SLEEP); new_cyclics = kmem_zalloc(sizeof (cyclic_t) * new_size, KM_SLEEP); /* * We know that no other expansions are in progress (they serialize * on cpu_lock), so we can safely read the softbuf metadata. */ old_hard = cpu->cyp_softbuf[0].cys_hard; for (i = CY_LOW_LEVEL; i < CY_LOW_LEVEL + CY_SOFT_LEVELS; i++) { cyc_softbuf_t *softbuf = &cpu->cyp_softbuf[i]; char hard = softbuf->cys_hard; cyc_pcbuffer_t *pc = &softbuf->cys_buf[hard ^ 1]; ASSERT(hard == old_hard); ASSERT(hard == softbuf->cys_soft); ASSERT(pc->cypc_buf == NULL); pc->cypc_buf = kmem_alloc(sizeof (cyc_index_t) * new_size, KM_SLEEP); pc->cypc_prodndx = pc->cypc_consndx = 0; pc->cypc_sizemask = new_size - 1; } arg.cyx_cpu = cpu; arg.cyx_heap = new_heap; arg.cyx_cyclics = new_cyclics; arg.cyx_size = new_size; cpu->cyp_modify_levels = 0; be->cyb_xcall(be->cyb_arg, cpu->cyp_cpu, (cyc_func_t)cyclic_expand_xcall, &arg); /* * Now block, waiting for the resize operation to complete. */ sema_p(&cpu->cyp_modify_wait); ASSERT(cpu->cyp_modify_levels == CY_SOFT_LEVELS); /* * The operation is complete; we can now free the old buffers. */ for (i = CY_LOW_LEVEL; i < CY_LOW_LEVEL + CY_SOFT_LEVELS; i++) { cyc_softbuf_t *softbuf = &cpu->cyp_softbuf[i]; char hard = softbuf->cys_hard; cyc_pcbuffer_t *pc = &softbuf->cys_buf[hard ^ 1]; ASSERT(hard == (old_hard ^ 1)); ASSERT(hard == softbuf->cys_soft); if (pc->cypc_buf == NULL) continue; ASSERT(pc->cypc_sizemask == ((new_size - 1) >> 1)); kmem_free(pc->cypc_buf, sizeof (cyc_index_t) * (pc->cypc_sizemask + 1)); pc->cypc_buf = NULL; } if (old_cyclics != NULL) { ASSERT(old_heap != NULL); ASSERT(old_size != 0); kmem_free(old_cyclics, sizeof (cyclic_t) * old_size); kmem_free(old_heap, sizeof (cyc_index_t) * old_size); } ASSERT(cpu->cyp_state == CYS_EXPANDING); cpu->cyp_state = CYS_ONLINE; } /* * cyclic_pick_cpu will attempt to pick a CPU according to the constraints * specified by the partition, bound CPU, and flags. Additionally, * cyclic_pick_cpu() will not pick the avoid CPU; it will return NULL if * the avoid CPU is the only CPU which satisfies the constraints. * * If CYF_CPU_BOUND is set in flags, the specified CPU must be non-NULL. * If CYF_PART_BOUND is set in flags, the specified partition must be non-NULL. * If both CYF_CPU_BOUND and CYF_PART_BOUND are set, the specified CPU must * be in the specified partition. */ static cyc_cpu_t * cyclic_pick_cpu(cpupart_t *part, cpu_t *bound, cpu_t *avoid, uint16_t flags) { cpu_t *c, *start = (part != NULL) ? part->cp_cpulist : CPU; cpu_t *online = NULL; uintptr_t offset; CYC_PTRACE("pick-cpu", part, bound); ASSERT(!(flags & CYF_CPU_BOUND) || bound != NULL); ASSERT(!(flags & CYF_PART_BOUND) || part != NULL); /* * If we're bound to our CPU, there isn't much choice involved. We * need to check that the CPU passed as bound is in the cpupart, and * that the CPU that we're binding to has been configured. */ if (flags & CYF_CPU_BOUND) { CYC_PTRACE("pick-cpu-bound", bound, avoid); if ((flags & CYF_PART_BOUND) && bound->cpu_part != part) panic("cyclic_pick_cpu: " "CPU binding contradicts partition binding"); if (bound == avoid) return (NULL); if (bound->cpu_cyclic == NULL) panic("cyclic_pick_cpu: " "attempt to bind to non-configured CPU"); return (bound->cpu_cyclic); } if (flags & CYF_PART_BOUND) { CYC_PTRACE("pick-part-bound", bound, avoid); offset = offsetof(cpu_t, cpu_next_part); } else { offset = offsetof(cpu_t, cpu_next_onln); } c = start; do { if (c->cpu_cyclic == NULL) continue; if (c->cpu_cyclic->cyp_state == CYS_OFFLINE) continue; if (c == avoid) continue; if (c->cpu_flags & CPU_ENABLE) goto found; if (online == NULL) online = c; } while ((c = *(cpu_t **)((uintptr_t)c + offset)) != start); /* * If we're here, we're in one of two situations: * * (a) We have a partition-bound cyclic, and there is no CPU in * our partition which is CPU_ENABLE'd. If we saw another * non-CYS_OFFLINE CPU in our partition, we'll go with it. * If not, the avoid CPU must be the only non-CYS_OFFLINE * CPU in the partition; we're forced to return NULL. * * (b) We have a partition-unbound cyclic, in which case there * must only be one CPU CPU_ENABLE'd, and it must be the one * we're trying to avoid. If cyclic_juggle()/cyclic_offline() * are called appropriately, this generally shouldn't happen * (the offline should fail before getting to this code). * At any rate: we can't avoid the avoid CPU, so we return * NULL. */ if (!(flags & CYF_PART_BOUND)) { ASSERT(avoid->cpu_flags & CPU_ENABLE); return (NULL); } CYC_PTRACE("pick-no-intr", part, avoid); if ((c = online) != NULL) goto found; CYC_PTRACE("pick-fail", part, avoid); ASSERT(avoid->cpu_part == start->cpu_part); return (NULL); found: CYC_PTRACE("pick-cpu-found", c, avoid); ASSERT(c != avoid); ASSERT(c->cpu_cyclic != NULL); return (c->cpu_cyclic); } static void cyclic_add_xcall(cyc_xcallarg_t *arg) { cyc_cpu_t *cpu = arg->cyx_cpu; cyc_handler_t *hdlr = arg->cyx_hdlr; cyc_time_t *when = arg->cyx_when; cyc_backend_t *be = cpu->cyp_backend; cyc_index_t ndx, nelems; cyc_cookie_t cookie; cyb_arg_t bar = be->cyb_arg; cyclic_t *cyclic; ASSERT(cpu->cyp_nelems < cpu->cyp_size); cookie = be->cyb_set_level(bar, CY_HIGH_LEVEL); CYC_TRACE(cpu, CY_HIGH_LEVEL, "add-xcall", when->cyt_when, when->cyt_interval); nelems = cpu->cyp_nelems++; if (nelems == 0) { /* * If this is the first element, we need to enable the * backend on this CPU. */ CYC_TRACE0(cpu, CY_HIGH_LEVEL, "enabled"); be->cyb_enable(bar); } ndx = cpu->cyp_heap[nelems]; cyclic = &cpu->cyp_cyclics[ndx]; ASSERT(cyclic->cy_flags == CYF_FREE); cyclic->cy_interval = when->cyt_interval; if (when->cyt_when == 0) { /* * If a start time hasn't been explicitly specified, we'll * start on the next interval boundary. */ cyclic->cy_expire = (gethrtime() / cyclic->cy_interval + 1) * cyclic->cy_interval; } else { cyclic->cy_expire = when->cyt_when; } cyclic->cy_handler = hdlr->cyh_func; cyclic->cy_arg = hdlr->cyh_arg; cyclic->cy_level = hdlr->cyh_level; cyclic->cy_flags = arg->cyx_flags; if (cyclic_upheap(cpu, nelems)) { hrtime_t exp = cyclic->cy_expire; CYC_TRACE(cpu, CY_HIGH_LEVEL, "add-reprog", cyclic, exp); /* * If our upheap propagated to the root, we need to * reprogram the interrupt source. */ be->cyb_reprogram(bar, exp); } be->cyb_restore_level(bar, cookie); arg->cyx_ndx = ndx; } static cyc_index_t cyclic_add_here(cyc_cpu_t *cpu, cyc_handler_t *hdlr, cyc_time_t *when, uint16_t flags) { cyc_backend_t *be = cpu->cyp_backend; cyb_arg_t bar = be->cyb_arg; cyc_xcallarg_t arg; CYC_PTRACE("add-cpu", cpu, hdlr->cyh_func); ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(cpu->cyp_state == CYS_ONLINE); ASSERT(!(cpu->cyp_cpu->cpu_flags & CPU_OFFLINE)); ASSERT(when->cyt_when >= 0 && when->cyt_interval > 0); if (cpu->cyp_nelems == cpu->cyp_size) { /* * This is expensive; it will cross call onto the other * CPU to perform the expansion. */ cyclic_expand(cpu); ASSERT(cpu->cyp_nelems < cpu->cyp_size); } /* * By now, we know that we're going to be able to successfully * perform the add. Now cross call over to the CPU of interest to * actually add our cyclic. */ arg.cyx_cpu = cpu; arg.cyx_hdlr = hdlr; arg.cyx_when = when; arg.cyx_flags = flags; be->cyb_xcall(bar, cpu->cyp_cpu, (cyc_func_t)cyclic_add_xcall, &arg); CYC_PTRACE("add-cpu-done", cpu, arg.cyx_ndx); return (arg.cyx_ndx); } static void cyclic_remove_xcall(cyc_xcallarg_t *arg) { cyc_cpu_t *cpu = arg->cyx_cpu; cyc_backend_t *be = cpu->cyp_backend; cyb_arg_t bar = be->cyb_arg; cyc_cookie_t cookie; cyc_index_t ndx = arg->cyx_ndx, nelems, i; cyc_index_t *heap, last; cyclic_t *cyclic; #ifdef DEBUG cyc_index_t root; #endif ASSERT(cpu->cyp_state == CYS_REMOVING); cookie = be->cyb_set_level(bar, CY_HIGH_LEVEL); CYC_TRACE1(cpu, CY_HIGH_LEVEL, "remove-xcall", ndx); heap = cpu->cyp_heap; nelems = cpu->cyp_nelems; ASSERT(nelems > 0); cyclic = &cpu->cyp_cyclics[ndx]; /* * Grab the current expiration time. If this cyclic is being * removed as part of a juggling operation, the expiration time * will be used when the cyclic is added to the new CPU. */ if (arg->cyx_when != NULL) { arg->cyx_when->cyt_when = cyclic->cy_expire; arg->cyx_when->cyt_interval = cyclic->cy_interval; } if (cyclic->cy_pend != 0) { /* * The pend is non-zero; this cyclic is currently being * executed (or will be executed shortly). If the caller * refuses to wait, we must return (doing nothing). Otherwise, * we will stash the pend value * in this CPU's rpend, and * then zero it out. The softint in the pend loop will see * that we have zeroed out pend, and will call the cyclic * handler rpend times. The caller will wait until the * softint has completed calling the cyclic handler. */ if (arg->cyx_wait == CY_NOWAIT) { arg->cyx_wait = CY_WAIT; goto out; } ASSERT(cyclic->cy_level != CY_HIGH_LEVEL); CYC_TRACE1(cpu, CY_HIGH_LEVEL, "remove-pend", cyclic->cy_pend); cpu->cyp_rpend = cyclic->cy_pend; cyclic->cy_pend = 0; } /* * Now set the flags to CYF_FREE. We don't need a membar_enter() * between zeroing pend and setting the flags because we're at * CY_HIGH_LEVEL (that is, the zeroing of pend and the setting * of cy_flags appear atomic to softints). */ cyclic->cy_flags = CYF_FREE; for (i = 0; i < nelems; i++) { if (heap[i] == ndx) break; } if (i == nelems) panic("attempt to remove non-existent cyclic"); cpu->cyp_nelems = --nelems; if (nelems == 0) { /* * If we just removed the last element, then we need to * disable the backend on this CPU. */ CYC_TRACE0(cpu, CY_HIGH_LEVEL, "disabled"); be->cyb_disable(bar); } if (i == nelems) { /* * If we just removed the last element of the heap, then * we don't have to downheap. */ CYC_TRACE0(cpu, CY_HIGH_LEVEL, "remove-bottom"); goto out; } #ifdef DEBUG root = heap[0]; #endif /* * Swap the last element of the heap with the one we want to * remove, and downheap (this has the implicit effect of putting * the newly freed element on the free list). */ heap[i] = (last = heap[nelems]); heap[nelems] = ndx; if (i == 0) { CYC_TRACE0(cpu, CY_HIGH_LEVEL, "remove-root"); cyclic_downheap(cpu, 0); } else { if (cyclic_upheap(cpu, i) == 0) { /* * The upheap didn't propagate to the root; if it * didn't propagate at all, we need to downheap. */ CYC_TRACE0(cpu, CY_HIGH_LEVEL, "remove-no-root"); if (heap[i] == last) { CYC_TRACE0(cpu, CY_HIGH_LEVEL, "remove-no-up"); cyclic_downheap(cpu, i); } ASSERT(heap[0] == root); goto out; } } /* * We're here because we changed the root; we need to reprogram * the clock source. */ cyclic = &cpu->cyp_cyclics[heap[0]]; CYC_TRACE0(cpu, CY_HIGH_LEVEL, "remove-reprog"); ASSERT(nelems != 0); be->cyb_reprogram(bar, cyclic->cy_expire); out: be->cyb_restore_level(bar, cookie); } static int cyclic_remove_here(cyc_cpu_t *cpu, cyc_index_t ndx, cyc_time_t *when, int wait) { cyc_backend_t *be = cpu->cyp_backend; cyc_xcallarg_t arg; cyclic_t *cyclic = &cpu->cyp_cyclics[ndx]; cyc_level_t level = cyclic->cy_level; ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(cpu->cyp_rpend == 0); ASSERT(wait == CY_WAIT || wait == CY_NOWAIT); arg.cyx_ndx = ndx; arg.cyx_cpu = cpu; arg.cyx_when = when; arg.cyx_wait = wait; ASSERT(cpu->cyp_state == CYS_ONLINE); cpu->cyp_state = CYS_REMOVING; be->cyb_xcall(be->cyb_arg, cpu->cyp_cpu, (cyc_func_t)cyclic_remove_xcall, &arg); /* * If the cyclic we removed wasn't at CY_HIGH_LEVEL, then we need to * check the cyp_rpend. If it's non-zero, then we need to wait here * for all pending cyclic handlers to run. */ ASSERT(!(level == CY_HIGH_LEVEL && cpu->cyp_rpend != 0)); ASSERT(!(wait == CY_NOWAIT && cpu->cyp_rpend != 0)); ASSERT(!(arg.cyx_wait == CY_NOWAIT && cpu->cyp_rpend != 0)); if (wait != arg.cyx_wait) { /* * We are being told that we must wait if we want to * remove this cyclic; put the CPU back in the CYS_ONLINE * state and return failure. */ ASSERT(wait == CY_NOWAIT && arg.cyx_wait == CY_WAIT); ASSERT(cpu->cyp_state == CYS_REMOVING); cpu->cyp_state = CYS_ONLINE; return (0); } if (cpu->cyp_rpend != 0) sema_p(&cpu->cyp_modify_wait); ASSERT(cpu->cyp_state == CYS_REMOVING); cpu->cyp_rpend = 0; cpu->cyp_state = CYS_ONLINE; return (1); } /* * If cyclic_reprogram() is called on the same CPU as the cyclic's CPU, then * it calls this function directly. Else, it invokes this function through * an X-call to the cyclic's CPU. */ static void cyclic_reprogram_cyclic(cyc_cpu_t *cpu, cyc_index_t ndx, hrtime_t expire) { cyc_backend_t *be = cpu->cyp_backend; cyb_arg_t bar = be->cyb_arg; cyc_cookie_t cookie; cyc_index_t nelems, i; cyc_index_t *heap; cyclic_t *cyclic; hrtime_t oexpire; int reprog; cookie = be->cyb_set_level(bar, CY_HIGH_LEVEL); CYC_TRACE1(cpu, CY_HIGH_LEVEL, "reprog-xcall", ndx); nelems = cpu->cyp_nelems; ASSERT(nelems > 0); heap = cpu->cyp_heap; /* * Reprogrammed cyclics are typically one-shot ones that get * set to infinity on every expiration. We shorten the search by * searching from the bottom of the heap to the top instead of the * other way around. */ for (i = nelems - 1; i >= 0; i--) { if (heap[i] == ndx) break; } if (i < 0) panic("attempt to reprogram non-existent cyclic"); cyclic = &cpu->cyp_cyclics[ndx]; oexpire = cyclic->cy_expire; cyclic->cy_expire = expire; reprog = (i == 0); if (expire > oexpire) { CYC_TRACE1(cpu, CY_HIGH_LEVEL, "reprog-down", i); cyclic_downheap(cpu, i); } else if (i > 0) { CYC_TRACE1(cpu, CY_HIGH_LEVEL, "reprog-up", i); reprog = cyclic_upheap(cpu, i); } if (reprog && (cpu->cyp_state != CYS_SUSPENDED)) { /* * The root changed. Reprogram the clock source. */ CYC_TRACE0(cpu, CY_HIGH_LEVEL, "reprog-root"); cyclic = &cpu->cyp_cyclics[heap[0]]; be->cyb_reprogram(bar, cyclic->cy_expire); } be->cyb_restore_level(bar, cookie); } static void cyclic_reprogram_xcall(cyc_xcallarg_t *arg) { cyclic_reprogram_cyclic(arg->cyx_cpu, arg->cyx_ndx, arg->cyx_when->cyt_when); } static void cyclic_reprogram_here(cyc_cpu_t *cpu, cyc_index_t ndx, hrtime_t expiration) { cyc_backend_t *be = cpu->cyp_backend; cyc_xcallarg_t arg; cyc_time_t when; ASSERT(expiration > 0); arg.cyx_ndx = ndx; arg.cyx_cpu = cpu; arg.cyx_when = &when; when.cyt_when = expiration; be->cyb_xcall(be->cyb_arg, cpu->cyp_cpu, (cyc_func_t)cyclic_reprogram_xcall, &arg); } /* * cyclic_juggle_one_to() should only be called when the source cyclic * can be juggled and the destination CPU is known to be able to accept * it. */ static void cyclic_juggle_one_to(cyc_id_t *idp, cyc_cpu_t *dest) { cyc_cpu_t *src = idp->cyi_cpu; cyc_index_t ndx = idp->cyi_ndx; cyc_time_t when; cyc_handler_t hdlr; cyclic_t *cyclic; uint16_t flags; hrtime_t delay; ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(src != NULL && idp->cyi_omni_list == NULL); ASSERT(!(dest->cyp_cpu->cpu_flags & (CPU_QUIESCED | CPU_OFFLINE))); CYC_PTRACE("juggle-one-to", idp, dest); cyclic = &src->cyp_cyclics[ndx]; flags = cyclic->cy_flags; ASSERT(!(flags & CYF_CPU_BOUND) && !(flags & CYF_FREE)); hdlr.cyh_func = cyclic->cy_handler; hdlr.cyh_level = cyclic->cy_level; hdlr.cyh_arg = cyclic->cy_arg; /* * Before we begin the juggling process, see if the destination * CPU requires an expansion. If it does, we'll perform the * expansion before removing the cyclic. This is to prevent us * from blocking while a system-critical cyclic (notably, the clock * cyclic) isn't on a CPU. */ if (dest->cyp_nelems == dest->cyp_size) { CYC_PTRACE("remove-expand", idp, dest); cyclic_expand(dest); ASSERT(dest->cyp_nelems < dest->cyp_size); } /* * Prevent a reprogram of this cyclic while we are relocating it. * Otherwise, cyclic_reprogram_here() will end up sending an X-call * to the wrong CPU. */ rw_enter(&idp->cyi_lock, RW_WRITER); /* * Remove the cyclic from the source. As mentioned above, we cannot * block during this operation; if we cannot remove the cyclic * without waiting, we spin for a time shorter than the interval, and * reattempt the (non-blocking) removal. If we continue to fail, * we will exponentially back off (up to half of the interval). * Note that the removal will ultimately succeed -- even if the * cyclic handler is blocked on a resource held by a thread which we * have preempted, priority inheritance assures that the preempted * thread will preempt us and continue to progress. */ for (delay = NANOSEC / MICROSEC; ; delay <<= 1) { /* * Before we begin this operation, disable kernel preemption. */ kpreempt_disable(); if (cyclic_remove_here(src, ndx, &when, CY_NOWAIT)) break; /* * The operation failed; enable kernel preemption while * spinning. */ kpreempt_enable(); CYC_PTRACE("remove-retry", idp, src); if (delay > (cyclic->cy_interval >> 1)) delay = cyclic->cy_interval >> 1; /* * Drop the RW lock to avoid a deadlock with the cyclic * handler (because it can potentially call cyclic_reprogram(). */ rw_exit(&idp->cyi_lock); drv_usecwait((clock_t)(delay / (NANOSEC / MICROSEC))); rw_enter(&idp->cyi_lock, RW_WRITER); } /* * Now add the cyclic to the destination. This won't block; we * performed any necessary (blocking) expansion of the destination * CPU before removing the cyclic from the source CPU. */ idp->cyi_ndx = cyclic_add_here(dest, &hdlr, &when, flags); idp->cyi_cpu = dest; kpreempt_enable(); /* * Now that we have successfully relocated the cyclic, allow * it to be reprogrammed. */ rw_exit(&idp->cyi_lock); } static int cyclic_juggle_one(cyc_id_t *idp) { cyc_index_t ndx = idp->cyi_ndx; cyc_cpu_t *cpu = idp->cyi_cpu, *dest; cyclic_t *cyclic = &cpu->cyp_cyclics[ndx]; cpu_t *c = cpu->cyp_cpu; cpupart_t *part = c->cpu_part; CYC_PTRACE("juggle-one", idp, cpu); ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(!(c->cpu_flags & CPU_OFFLINE)); ASSERT(cpu->cyp_state == CYS_ONLINE); ASSERT(!(cyclic->cy_flags & CYF_FREE)); if ((dest = cyclic_pick_cpu(part, c, c, cyclic->cy_flags)) == NULL) { /* * Bad news: this cyclic can't be juggled. */ CYC_PTRACE("juggle-fail", idp, cpu) return (0); } cyclic_juggle_one_to(idp, dest); return (1); } static void cyclic_unbind_cpu(cyclic_id_t id) { cyc_id_t *idp = (cyc_id_t *)id; cyc_cpu_t *cpu = idp->cyi_cpu; cpu_t *c = cpu->cyp_cpu; cyclic_t *cyclic = &cpu->cyp_cyclics[idp->cyi_ndx]; CYC_PTRACE("unbind-cpu", id, cpu); ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(cpu->cyp_state == CYS_ONLINE); ASSERT(!(cyclic->cy_flags & CYF_FREE)); ASSERT(cyclic->cy_flags & CYF_CPU_BOUND); cyclic->cy_flags &= ~CYF_CPU_BOUND; /* * If we were bound to CPU which has interrupts disabled, we need * to juggle away. This can only fail if we are bound to a * processor set, and if every CPU in the processor set has * interrupts disabled. */ if (!(c->cpu_flags & CPU_ENABLE)) { int res = cyclic_juggle_one(idp); ASSERT((res && idp->cyi_cpu != cpu) || (!res && (cyclic->cy_flags & CYF_PART_BOUND))); } } static void cyclic_bind_cpu(cyclic_id_t id, cpu_t *d) { cyc_id_t *idp = (cyc_id_t *)id; cyc_cpu_t *dest = d->cpu_cyclic, *cpu = idp->cyi_cpu; cpu_t *c = cpu->cyp_cpu; cyclic_t *cyclic = &cpu->cyp_cyclics[idp->cyi_ndx]; cpupart_t *part = c->cpu_part; CYC_PTRACE("bind-cpu", id, dest); ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(!(d->cpu_flags & CPU_OFFLINE)); ASSERT(!(c->cpu_flags & CPU_OFFLINE)); ASSERT(cpu->cyp_state == CYS_ONLINE); ASSERT(dest != NULL); ASSERT(dest->cyp_state == CYS_ONLINE); ASSERT(!(cyclic->cy_flags & CYF_FREE)); ASSERT(!(cyclic->cy_flags & CYF_CPU_BOUND)); dest = cyclic_pick_cpu(part, d, NULL, cyclic->cy_flags | CYF_CPU_BOUND); if (dest != cpu) { cyclic_juggle_one_to(idp, dest); cyclic = &dest->cyp_cyclics[idp->cyi_ndx]; } cyclic->cy_flags |= CYF_CPU_BOUND; } static void cyclic_unbind_cpupart(cyclic_id_t id) { cyc_id_t *idp = (cyc_id_t *)id; cyc_cpu_t *cpu = idp->cyi_cpu; cpu_t *c = cpu->cyp_cpu; cyclic_t *cyc = &cpu->cyp_cyclics[idp->cyi_ndx]; CYC_PTRACE("unbind-part", idp, c->cpu_part); ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(cpu->cyp_state == CYS_ONLINE); ASSERT(!(cyc->cy_flags & CYF_FREE)); ASSERT(cyc->cy_flags & CYF_PART_BOUND); cyc->cy_flags &= ~CYF_PART_BOUND; /* * If we're on a CPU which has interrupts disabled (and if this cyclic * isn't bound to the CPU), we need to juggle away. */ if (!(c->cpu_flags & CPU_ENABLE) && !(cyc->cy_flags & CYF_CPU_BOUND)) { int res = cyclic_juggle_one(idp); ASSERT(res && idp->cyi_cpu != cpu); } } static void cyclic_bind_cpupart(cyclic_id_t id, cpupart_t *part) { cyc_id_t *idp = (cyc_id_t *)id; cyc_cpu_t *cpu = idp->cyi_cpu, *dest; cpu_t *c = cpu->cyp_cpu; cyclic_t *cyc = &cpu->cyp_cyclics[idp->cyi_ndx]; CYC_PTRACE("bind-part", idp, part); ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(!(c->cpu_flags & CPU_OFFLINE)); ASSERT(cpu->cyp_state == CYS_ONLINE); ASSERT(!(cyc->cy_flags & CYF_FREE)); ASSERT(!(cyc->cy_flags & CYF_PART_BOUND)); ASSERT(part->cp_ncpus > 0); dest = cyclic_pick_cpu(part, c, NULL, cyc->cy_flags | CYF_PART_BOUND); if (dest != cpu) { cyclic_juggle_one_to(idp, dest); cyc = &dest->cyp_cyclics[idp->cyi_ndx]; } cyc->cy_flags |= CYF_PART_BOUND; } static void cyclic_configure(cpu_t *c) { cyc_cpu_t *cpu = kmem_zalloc(sizeof (cyc_cpu_t), KM_SLEEP); cyc_backend_t *nbe = kmem_zalloc(sizeof (cyc_backend_t), KM_SLEEP); int i; CYC_PTRACE1("configure", cpu); ASSERT(MUTEX_HELD(&cpu_lock)); if (cyclic_id_cache == NULL) cyclic_id_cache = kmem_cache_create("cyclic_id_cache", sizeof (cyc_id_t), 0, NULL, NULL, NULL, NULL, NULL, 0); cpu->cyp_cpu = c; sema_init(&cpu->cyp_modify_wait, 0, NULL, SEMA_DEFAULT, NULL); cpu->cyp_size = 1; cpu->cyp_heap = kmem_zalloc(sizeof (cyc_index_t), KM_SLEEP); cpu->cyp_cyclics = kmem_zalloc(sizeof (cyclic_t), KM_SLEEP); cpu->cyp_cyclics->cy_flags = CYF_FREE; for (i = CY_LOW_LEVEL; i < CY_LOW_LEVEL + CY_SOFT_LEVELS; i++) { /* * We don't need to set the sizemask; it's already zero * (which is the appropriate sizemask for a size of 1). */ cpu->cyp_softbuf[i].cys_buf[0].cypc_buf = kmem_alloc(sizeof (cyc_index_t), KM_SLEEP); } cpu->cyp_state = CYS_OFFLINE; /* * Setup the backend for this CPU. */ bcopy(&cyclic_backend, nbe, sizeof (cyc_backend_t)); nbe->cyb_arg = nbe->cyb_configure(c); cpu->cyp_backend = nbe; /* * On platforms where stray interrupts may be taken during startup, * the CPU's cpu_cyclic pointer serves as an indicator that the * cyclic subsystem for this CPU is prepared to field interrupts. */ membar_producer(); c->cpu_cyclic = cpu; } static void cyclic_unconfigure(cpu_t *c) { cyc_cpu_t *cpu = c->cpu_cyclic; cyc_backend_t *be = cpu->cyp_backend; cyb_arg_t bar = be->cyb_arg; int i; CYC_PTRACE1("unconfigure", cpu); ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(cpu->cyp_state == CYS_OFFLINE); ASSERT(cpu->cyp_nelems == 0); /* * Let the backend know that the CPU is being yanked, and free up * the backend structure. */ be->cyb_unconfigure(bar); kmem_free(be, sizeof (cyc_backend_t)); cpu->cyp_backend = NULL; /* * Free up the producer/consumer buffers at each of the soft levels. */ for (i = CY_LOW_LEVEL; i < CY_LOW_LEVEL + CY_SOFT_LEVELS; i++) { cyc_softbuf_t *softbuf = &cpu->cyp_softbuf[i]; uchar_t hard = softbuf->cys_hard; cyc_pcbuffer_t *pc = &softbuf->cys_buf[hard]; size_t bufsize = sizeof (cyc_index_t) * (pc->cypc_sizemask + 1); /* * Assert that we're not in the middle of a resize operation. */ ASSERT(hard == softbuf->cys_soft); ASSERT(hard == 0 || hard == 1); ASSERT(pc->cypc_buf != NULL); ASSERT(softbuf->cys_buf[hard ^ 1].cypc_buf == NULL); kmem_free(pc->cypc_buf, bufsize); pc->cypc_buf = NULL; } /* * Finally, clean up our remaining dynamic structures and NULL out * the cpu_cyclic pointer. */ kmem_free(cpu->cyp_cyclics, cpu->cyp_size * sizeof (cyclic_t)); kmem_free(cpu->cyp_heap, cpu->cyp_size * sizeof (cyc_index_t)); kmem_free(cpu, sizeof (cyc_cpu_t)); c->cpu_cyclic = NULL; } static int cyclic_cpu_setup(cpu_setup_t what, int id) { /* * We are guaranteed that there is still/already an entry in the * cpu array for this CPU. */ cpu_t *c = cpu[id]; cyc_cpu_t *cyp = c->cpu_cyclic; ASSERT(MUTEX_HELD(&cpu_lock)); switch (what) { case CPU_CONFIG: ASSERT(cyp == NULL); cyclic_configure(c); break; case CPU_UNCONFIG: ASSERT(cyp != NULL && cyp->cyp_state == CYS_OFFLINE); cyclic_unconfigure(c); break; default: break; } return (0); } static void cyclic_suspend_xcall(cyc_xcallarg_t *arg) { cyc_cpu_t *cpu = arg->cyx_cpu; cyc_backend_t *be = cpu->cyp_backend; cyc_cookie_t cookie; cyb_arg_t bar = be->cyb_arg; cookie = be->cyb_set_level(bar, CY_HIGH_LEVEL); CYC_TRACE1(cpu, CY_HIGH_LEVEL, "suspend-xcall", cpu->cyp_nelems); ASSERT(cpu->cyp_state == CYS_ONLINE || cpu->cyp_state == CYS_OFFLINE); /* * We won't disable this CPU unless it has a non-zero number of * elements (cpu_lock assures that no one else may be attempting * to disable this CPU). */ if (cpu->cyp_nelems > 0) { ASSERT(cpu->cyp_state == CYS_ONLINE); be->cyb_disable(bar); } if (cpu->cyp_state == CYS_ONLINE) cpu->cyp_state = CYS_SUSPENDED; be->cyb_suspend(bar); be->cyb_restore_level(bar, cookie); } static void cyclic_resume_xcall(cyc_xcallarg_t *arg) { cyc_cpu_t *cpu = arg->cyx_cpu; cyc_backend_t *be = cpu->cyp_backend; cyc_cookie_t cookie; cyb_arg_t bar = be->cyb_arg; cyc_state_t state = cpu->cyp_state; cookie = be->cyb_set_level(bar, CY_HIGH_LEVEL); CYC_TRACE1(cpu, CY_HIGH_LEVEL, "resume-xcall", cpu->cyp_nelems); ASSERT(state == CYS_SUSPENDED || state == CYS_OFFLINE); be->cyb_resume(bar); /* * We won't enable this CPU unless it has a non-zero number of * elements. */ if (cpu->cyp_nelems > 0) { cyclic_t *cyclic = &cpu->cyp_cyclics[cpu->cyp_heap[0]]; hrtime_t exp = cyclic->cy_expire; CYC_TRACE(cpu, CY_HIGH_LEVEL, "resume-reprog", cyclic, exp); ASSERT(state == CYS_SUSPENDED); be->cyb_enable(bar); be->cyb_reprogram(bar, exp); } if (state == CYS_SUSPENDED) cpu->cyp_state = CYS_ONLINE; CYC_TRACE1(cpu, CY_HIGH_LEVEL, "resume-done", cpu->cyp_nelems); be->cyb_restore_level(bar, cookie); } static void cyclic_omni_start(cyc_id_t *idp, cyc_cpu_t *cpu) { cyc_omni_handler_t *omni = &idp->cyi_omni_hdlr; cyc_omni_cpu_t *ocpu = kmem_alloc(sizeof (cyc_omni_cpu_t), KM_SLEEP); cyc_handler_t hdlr; cyc_time_t when; CYC_PTRACE("omni-start", cpu, idp); ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(cpu->cyp_state == CYS_ONLINE); ASSERT(idp->cyi_cpu == NULL); hdlr.cyh_func = NULL; hdlr.cyh_arg = NULL; hdlr.cyh_level = CY_LEVELS; when.cyt_when = 0; when.cyt_interval = 0; omni->cyo_online(omni->cyo_arg, cpu->cyp_cpu, &hdlr, &when); ASSERT(hdlr.cyh_func != NULL); ASSERT(hdlr.cyh_level < CY_LEVELS); ASSERT(when.cyt_when >= 0 && when.cyt_interval > 0); ocpu->cyo_cpu = cpu; ocpu->cyo_arg = hdlr.cyh_arg; ocpu->cyo_ndx = cyclic_add_here(cpu, &hdlr, &when, 0); ocpu->cyo_next = idp->cyi_omni_list; idp->cyi_omni_list = ocpu; } static void cyclic_omni_stop(cyc_id_t *idp, cyc_cpu_t *cpu) { cyc_omni_handler_t *omni = &idp->cyi_omni_hdlr; cyc_omni_cpu_t *ocpu = idp->cyi_omni_list, *prev = NULL; clock_t delay; int ret; CYC_PTRACE("omni-stop", cpu, idp); ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(cpu->cyp_state == CYS_ONLINE); ASSERT(idp->cyi_cpu == NULL); ASSERT(ocpu != NULL); /* * Prevent a reprogram of this cyclic while we are removing it. * Otherwise, cyclic_reprogram_here() will end up sending an X-call * to the offlined CPU. */ rw_enter(&idp->cyi_lock, RW_WRITER); while (ocpu != NULL && ocpu->cyo_cpu != cpu) { prev = ocpu; ocpu = ocpu->cyo_next; } /* * We _must_ have found an cyc_omni_cpu which corresponds to this * CPU -- the definition of an omnipresent cyclic is that it runs * on all online CPUs. */ ASSERT(ocpu != NULL); if (prev == NULL) { idp->cyi_omni_list = ocpu->cyo_next; } else { prev->cyo_next = ocpu->cyo_next; } /* * Remove the cyclic from the source. We cannot block during this * operation because we are holding the cyi_lock which can be held * by the cyclic handler via cyclic_reprogram(). * * If we cannot remove the cyclic without waiting, we spin for a time, * and reattempt the (non-blocking) removal. If the handler is blocked * on the cyi_lock, then we let go of it in the spin loop to give * the handler a chance to run. Note that the removal will ultimately * succeed -- even if the cyclic handler is blocked on a resource * held by a thread which we have preempted, priority inheritance * assures that the preempted thread will preempt us and continue * to progress. */ for (delay = 1; ; delay <<= 1) { /* * Before we begin this operation, disable kernel preemption. */ kpreempt_disable(); ret = cyclic_remove_here(ocpu->cyo_cpu, ocpu->cyo_ndx, NULL, CY_NOWAIT); /* * Enable kernel preemption while spinning. */ kpreempt_enable(); if (ret) break; CYC_PTRACE("remove-omni-retry", idp, ocpu->cyo_cpu); /* * Drop the RW lock to avoid a deadlock with the cyclic * handler (because it can potentially call cyclic_reprogram(). */ rw_exit(&idp->cyi_lock); drv_usecwait(delay); rw_enter(&idp->cyi_lock, RW_WRITER); } /* * Now that we have successfully removed the cyclic, allow the omni * cyclic to be reprogrammed on other CPUs. */ rw_exit(&idp->cyi_lock); /* * The cyclic has been removed from this CPU; time to call the * omnipresent offline handler. */ if (omni->cyo_offline != NULL) omni->cyo_offline(omni->cyo_arg, cpu->cyp_cpu, ocpu->cyo_arg); kmem_free(ocpu, sizeof (cyc_omni_cpu_t)); } static cyc_id_t * cyclic_new_id() { cyc_id_t *idp; ASSERT(MUTEX_HELD(&cpu_lock)); idp = kmem_cache_alloc(cyclic_id_cache, KM_SLEEP); /* * The cyi_cpu field of the cyc_id_t structure tracks the CPU * associated with the cyclic. If and only if this field is NULL, the * cyc_id_t is an omnipresent cyclic. Note that cyi_omni_list may be * NULL for an omnipresent cyclic while the cyclic is being created * or destroyed. */ idp->cyi_cpu = NULL; idp->cyi_ndx = 0; rw_init(&idp->cyi_lock, NULL, RW_DEFAULT, NULL); idp->cyi_next = cyclic_id_head; idp->cyi_prev = NULL; idp->cyi_omni_list = NULL; if (cyclic_id_head != NULL) { ASSERT(cyclic_id_head->cyi_prev == NULL); cyclic_id_head->cyi_prev = idp; } cyclic_id_head = idp; return (idp); } /* * cyclic_id_t cyclic_add(cyc_handler_t *, cyc_time_t *) * * Overview * * cyclic_add() will create an unbound cyclic with the specified handler and * interval. The cyclic will run on a CPU which both has interrupts enabled * and is in the system CPU partition. * * Arguments and notes * * As its first argument, cyclic_add() takes a cyc_handler, which has the * following members: * * cyc_func_t cyh_func <-- Cyclic handler * void *cyh_arg <-- Argument to cyclic handler * cyc_level_t cyh_level <-- Level at which to fire; must be one of * CY_LOW_LEVEL, CY_LOCK_LEVEL or CY_HIGH_LEVEL * * Note that cyh_level is _not_ an ipl or spl; it must be one the * CY_*_LEVELs. This layer of abstraction allows the platform to define * the precise interrupt priority levels, within the following constraints: * * CY_LOCK_LEVEL must map to LOCK_LEVEL * CY_HIGH_LEVEL must map to an ipl greater than LOCK_LEVEL * CY_LOW_LEVEL must map to an ipl below LOCK_LEVEL * * In addition to a cyc_handler, cyclic_add() takes a cyc_time, which * has the following members: * * hrtime_t cyt_when <-- Absolute time, in nanoseconds since boot, at * which to start firing * hrtime_t cyt_interval <-- Length of interval, in nanoseconds * * gethrtime() is the time source for nanoseconds since boot. If cyt_when * is set to 0, the cyclic will start to fire when cyt_interval next * divides the number of nanoseconds since boot. * * The cyt_interval field _must_ be filled in by the caller; one-shots are * _not_ explicitly supported by the cyclic subsystem (cyclic_add() will * assert that cyt_interval is non-zero). The maximum value for either * field is INT64_MAX; the caller is responsible for assuring that * cyt_when + cyt_interval <= INT64_MAX. Neither field may be negative. * * For an arbitrary time t in the future, the cyclic handler is guaranteed * to have been called (t - cyt_when) / cyt_interval times. This will * be true even if interrupts have been disabled for periods greater than * cyt_interval nanoseconds. In order to compensate for such periods, * the cyclic handler may be called a finite number of times with an * arbitrarily small interval. * * The cyclic subsystem will not enforce any lower bound on the interval; * if the interval is less than the time required to process an interrupt, * the CPU will wedge. It's the responsibility of the caller to assure that * either the value of the interval is sane, or that its caller has * sufficient privilege to deny service (i.e. its caller is root). * * The cyclic handler is guaranteed to be single threaded, even while the * cyclic is being juggled between CPUs (see cyclic_juggle(), below). * That is, a given cyclic handler will never be executed simultaneously * on different CPUs. * * Return value * * cyclic_add() returns a cyclic_id_t, which is guaranteed to be a value * other than CYCLIC_NONE. cyclic_add() cannot fail. * * Caller's context * * cpu_lock must be held by the caller, and the caller must not be in * interrupt context. cyclic_add() will perform a KM_SLEEP kernel * memory allocation, so the usual rules (e.g. p_lock cannot be held) * apply. A cyclic may be added even in the presence of CPUs that have * not been configured with respect to the cyclic subsystem, but only * configured CPUs will be eligible to run the new cyclic. * * Cyclic handler's context * * Cyclic handlers will be executed in the interrupt context corresponding * to the specified level (i.e. either high, lock or low level). The * usual context rules apply. * * A cyclic handler may not grab ANY locks held by the caller of any of * cyclic_add(), cyclic_remove() or cyclic_bind(); the implementation of * these functions may require blocking on cyclic handler completion. * Moreover, cyclic handlers may not make any call back into the cyclic * subsystem. */ cyclic_id_t cyclic_add(cyc_handler_t *hdlr, cyc_time_t *when) { cyc_id_t *idp = cyclic_new_id(); ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(when->cyt_when >= 0 && when->cyt_interval > 0); idp->cyi_cpu = cyclic_pick_cpu(NULL, NULL, NULL, 0); idp->cyi_ndx = cyclic_add_here(idp->cyi_cpu, hdlr, when, 0); return ((uintptr_t)idp); } /* * cyclic_id_t cyclic_add_omni(cyc_omni_handler_t *) * * Overview * * cyclic_add_omni() will create an omnipresent cyclic with the specified * online and offline handlers. Omnipresent cyclics run on all online * CPUs, including CPUs which have unbound interrupts disabled. * * Arguments * * As its only argument, cyclic_add_omni() takes a cyc_omni_handler, which * has the following members: * * void (*cyo_online)() <-- Online handler * void (*cyo_offline)() <-- Offline handler * void *cyo_arg <-- Argument to be passed to on/offline handlers * * Online handler * * The cyo_online member is a pointer to a function which has the following * four arguments: * * void * <-- Argument (cyo_arg) * cpu_t * <-- Pointer to CPU about to be onlined * cyc_handler_t * <-- Pointer to cyc_handler_t; must be filled in * by omni online handler * cyc_time_t * <-- Pointer to cyc_time_t; must be filled in by * omni online handler * * The omni cyclic online handler is always called _before_ the omni * cyclic begins to fire on the specified CPU. As the above argument * description implies, the online handler must fill in the two structures * passed to it: the cyc_handler_t and the cyc_time_t. These are the * same two structures passed to cyclic_add(), outlined above. This * allows the omni cyclic to have maximum flexibility; different CPUs may * optionally * * (a) have different intervals * (b) be explicitly in or out of phase with one another * (c) have different handlers * (d) have different handler arguments * (e) fire at different levels * * Of these, (e) seems somewhat dubious, but is nonetheless allowed. * * The omni online handler is called in the same context as cyclic_add(), * and has the same liberties: omni online handlers may perform KM_SLEEP * kernel memory allocations, and may grab locks which are also acquired * by cyclic handlers. However, omni cyclic online handlers may _not_ * call back into the cyclic subsystem, and should be generally careful * about calling into arbitrary kernel subsystems. * * Offline handler * * The cyo_offline member is a pointer to a function which has the following * three arguments: * * void * <-- Argument (cyo_arg) * cpu_t * <-- Pointer to CPU about to be offlined * void * <-- CPU's cyclic argument (that is, value * to which cyh_arg member of the cyc_handler_t * was set in the omni online handler) * * The omni cyclic offline handler is always called _after_ the omni * cyclic has ceased firing on the specified CPU. Its purpose is to * allow cleanup of any resources dynamically allocated in the omni cyclic * online handler. The context of the offline handler is identical to * that of the online handler; the same constraints and liberties apply. * * The offline handler is optional; it may be NULL. * * Return value * * cyclic_add_omni() returns a cyclic_id_t, which is guaranteed to be a * value other than CYCLIC_NONE. cyclic_add_omni() cannot fail. * * Caller's context * * The caller's context is identical to that of cyclic_add(), specified * above. */ cyclic_id_t cyclic_add_omni(cyc_omni_handler_t *omni) { cyc_id_t *idp = cyclic_new_id(); cyc_cpu_t *cpu; cpu_t *c; ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(omni != NULL && omni->cyo_online != NULL); idp->cyi_omni_hdlr = *omni; c = cpu_list; do { if ((cpu = c->cpu_cyclic) == NULL) continue; if (cpu->cyp_state != CYS_ONLINE) { ASSERT(cpu->cyp_state == CYS_OFFLINE); continue; } cyclic_omni_start(idp, cpu); } while ((c = c->cpu_next) != cpu_list); /* * We must have found at least one online CPU on which to run * this cyclic. */ ASSERT(idp->cyi_omni_list != NULL); ASSERT(idp->cyi_cpu == NULL); return ((uintptr_t)idp); } /* * void cyclic_remove(cyclic_id_t) * * Overview * * cyclic_remove() will remove the specified cyclic from the system. * * Arguments and notes * * The only argument is a cyclic_id returned from either cyclic_add() or * cyclic_add_omni(). * * By the time cyclic_remove() returns, the caller is guaranteed that the * removed cyclic handler has completed execution (this is the same * semantic that untimeout() provides). As a result, cyclic_remove() may * need to block, waiting for the removed cyclic to complete execution. * This leads to an important constraint on the caller: no lock may be * held across cyclic_remove() that also may be acquired by a cyclic * handler. * * Return value * * None; cyclic_remove() always succeeds. * * Caller's context * * cpu_lock must be held by the caller, and the caller must not be in * interrupt context. The caller may not hold any locks which are also * grabbed by any cyclic handler. See "Arguments and notes", above. */ void cyclic_remove(cyclic_id_t id) { cyc_id_t *idp = (cyc_id_t *)id; cyc_id_t *prev = idp->cyi_prev, *next = idp->cyi_next; cyc_cpu_t *cpu = idp->cyi_cpu; CYC_PTRACE("remove", idp, idp->cyi_cpu); ASSERT(MUTEX_HELD(&cpu_lock)); if (cpu != NULL) { (void) cyclic_remove_here(cpu, idp->cyi_ndx, NULL, CY_WAIT); } else { ASSERT(idp->cyi_omni_list != NULL); while (idp->cyi_omni_list != NULL) cyclic_omni_stop(idp, idp->cyi_omni_list->cyo_cpu); } if (prev != NULL) { ASSERT(cyclic_id_head != idp); prev->cyi_next = next; } else { ASSERT(cyclic_id_head == idp); cyclic_id_head = next; } if (next != NULL) next->cyi_prev = prev; kmem_cache_free(cyclic_id_cache, idp); } /* * void cyclic_bind(cyclic_id_t, cpu_t *, cpupart_t *) * * Overview * * cyclic_bind() atomically changes the CPU and CPU partition bindings * of a cyclic. * * Arguments and notes * * The first argument is a cyclic_id retuned from cyclic_add(). * cyclic_bind() may _not_ be called on a cyclic_id returned from * cyclic_add_omni(). * * The second argument specifies the CPU to which to bind the specified * cyclic. If the specified cyclic is bound to a CPU other than the one * specified, it will be unbound from its bound CPU. Unbinding the cyclic * from its CPU may cause it to be juggled to another CPU. If the specified * CPU is non-NULL, the cyclic will be subsequently rebound to the specified * CPU. * * If a CPU with bound cyclics is transitioned into the P_NOINTR state, * only cyclics not bound to the CPU can be juggled away; CPU-bound cyclics * will continue to fire on the P_NOINTR CPU. A CPU with bound cyclics * cannot be offlined (attempts to offline the CPU will return EBUSY). * Likewise, cyclics may not be bound to an offline CPU; if the caller * attempts to bind a cyclic to an offline CPU, the cyclic subsystem will * panic. * * The third argument specifies the CPU partition to which to bind the * specified cyclic. If the specified cyclic is bound to a CPU partition * other than the one specified, it will be unbound from its bound * partition. Unbinding the cyclic from its CPU partition may cause it * to be juggled to another CPU. If the specified CPU partition is * non-NULL, the cyclic will be subsequently rebound to the specified CPU * partition. * * It is the caller's responsibility to assure that the specified CPU * partition contains a CPU. If it does not, the cyclic subsystem will * panic. A CPU partition with bound cyclics cannot be destroyed (attempts * to destroy the partition will return EBUSY). If a CPU with * partition-bound cyclics is transitioned into the P_NOINTR state, cyclics * bound to the CPU's partition (but not bound to the CPU) will be juggled * away only if there exists another CPU in the partition in the P_ONLINE * state. * * It is the caller's responsibility to assure that the specified CPU and * CPU partition are self-consistent. If both parameters are non-NULL, * and the specified CPU partition does not contain the specified CPU, the * cyclic subsystem will panic. * * It is the caller's responsibility to assure that the specified CPU has * been configured with respect to the cyclic subsystem. Generally, this * is always true for valid, on-line CPUs. The only periods of time during * which this may not be true are during MP boot (i.e. after cyclic_init() * is called but before cyclic_mp_init() is called) or during dynamic * reconfiguration; cyclic_bind() should only be called with great care * from these contexts. * * Return value * * None; cyclic_bind() always succeeds. * * Caller's context * * cpu_lock must be held by the caller, and the caller must not be in * interrupt context. The caller may not hold any locks which are also * grabbed by any cyclic handler. */ void cyclic_bind(cyclic_id_t id, cpu_t *d, cpupart_t *part) { cyc_id_t *idp = (cyc_id_t *)id; cyc_cpu_t *cpu = idp->cyi_cpu; cpu_t *c; uint16_t flags; CYC_PTRACE("bind", d, part); ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(part == NULL || d == NULL || d->cpu_part == part); if (cpu == NULL) { ASSERT(idp->cyi_omni_list != NULL); panic("attempt to change binding of omnipresent cyclic"); } c = cpu->cyp_cpu; flags = cpu->cyp_cyclics[idp->cyi_ndx].cy_flags; if (c != d && (flags & CYF_CPU_BOUND)) cyclic_unbind_cpu(id); /* * Reload our cpu (we may have migrated). We don't have to reload * the flags field here; if we were CYF_PART_BOUND on entry, we are * CYF_PART_BOUND now. */ cpu = idp->cyi_cpu; c = cpu->cyp_cpu; if (part != c->cpu_part && (flags & CYF_PART_BOUND)) cyclic_unbind_cpupart(id); /* * Now reload the flags field, asserting that if we are CPU bound, * the CPU was specified (and likewise, if we are partition bound, * the partition was specified). */ cpu = idp->cyi_cpu; c = cpu->cyp_cpu; flags = cpu->cyp_cyclics[idp->cyi_ndx].cy_flags; ASSERT(!(flags & CYF_CPU_BOUND) || c == d); ASSERT(!(flags & CYF_PART_BOUND) || c->cpu_part == part); if (!(flags & CYF_CPU_BOUND) && d != NULL) cyclic_bind_cpu(id, d); if (!(flags & CYF_PART_BOUND) && part != NULL) cyclic_bind_cpupart(id, part); } int cyclic_reprogram(cyclic_id_t id, hrtime_t expiration) { cyc_id_t *idp = (cyc_id_t *)id; cyc_cpu_t *cpu; cyc_omni_cpu_t *ocpu; cyc_index_t ndx; ASSERT(expiration > 0); CYC_PTRACE("reprog", idp, idp->cyi_cpu); kpreempt_disable(); /* * Prevent the cyclic from moving or disappearing while we reprogram. */ rw_enter(&idp->cyi_lock, RW_READER); if (idp->cyi_cpu == NULL) { ASSERT(curthread->t_preempt > 0); cpu = CPU->cpu_cyclic; /* * For an omni cyclic, we reprogram the cyclic corresponding * to the current CPU. Look for it in the list. */ ocpu = idp->cyi_omni_list; while (ocpu != NULL) { if (ocpu->cyo_cpu == cpu) break; ocpu = ocpu->cyo_next; } if (ocpu == NULL) { /* * Didn't find it. This means that CPU offline * must have removed it racing with us. So, * nothing to do. */ rw_exit(&idp->cyi_lock); kpreempt_enable(); return (0); } ndx = ocpu->cyo_ndx; } else { cpu = idp->cyi_cpu; ndx = idp->cyi_ndx; } if (cpu->cyp_cpu == CPU) cyclic_reprogram_cyclic(cpu, ndx, expiration); else cyclic_reprogram_here(cpu, ndx, expiration); /* * Allow the cyclic to be moved or removed. */ rw_exit(&idp->cyi_lock); kpreempt_enable(); return (1); } hrtime_t cyclic_getres() { return (cyclic_resolution); } void cyclic_init(cyc_backend_t *be, hrtime_t resolution) { ASSERT(MUTEX_HELD(&cpu_lock)); CYC_PTRACE("init", be, resolution); cyclic_resolution = resolution; /* * Copy the passed cyc_backend into the backend template. This must * be done before the CPU can be configured. */ bcopy(be, &cyclic_backend, sizeof (cyc_backend_t)); /* * It's safe to look at the "CPU" pointer without disabling kernel * preemption; cyclic_init() is called only during startup by the * cyclic backend. */ cyclic_configure(CPU); cyclic_online(CPU); } /* * It is assumed that cyclic_mp_init() is called some time after cyclic * init (and therefore, after cpu0 has been initialized). We grab cpu_lock, * find the already initialized CPU, and initialize every other CPU with the * same backend. Finally, we register a cpu_setup function. */ void cyclic_mp_init() { cpu_t *c; mutex_enter(&cpu_lock); c = cpu_list; do { if (c->cpu_cyclic == NULL) { cyclic_configure(c); cyclic_online(c); } } while ((c = c->cpu_next) != cpu_list); register_cpu_setup_func((cpu_setup_func_t *)cyclic_cpu_setup, NULL); mutex_exit(&cpu_lock); } /* * int cyclic_juggle(cpu_t *) * * Overview * * cyclic_juggle() juggles as many cyclics as possible away from the * specified CPU; all remaining cyclics on the CPU will either be CPU- * or partition-bound. * * Arguments and notes * * The only argument to cyclic_juggle() is the CPU from which cyclics * should be juggled. CPU-bound cyclics are never juggled; partition-bound * cyclics are only juggled if the specified CPU is in the P_NOINTR state * and there exists a P_ONLINE CPU in the partition. The cyclic subsystem * assures that a cyclic will never fire late or spuriously, even while * being juggled. * * Return value * * cyclic_juggle() returns a non-zero value if all cyclics were able to * be juggled away from the CPU, and zero if one or more cyclics could * not be juggled away. * * Caller's context * * cpu_lock must be held by the caller, and the caller must not be in * interrupt context. The caller may not hold any locks which are also * grabbed by any cyclic handler. While cyclic_juggle() _may_ be called * in any context satisfying these constraints, it _must_ be called * immediately after clearing CPU_ENABLE (i.e. before dropping cpu_lock). * Failure to do so could result in an assertion failure in the cyclic * subsystem. */ int cyclic_juggle(cpu_t *c) { cyc_cpu_t *cpu = c->cpu_cyclic; cyc_id_t *idp; int all_juggled = 1; CYC_PTRACE1("juggle", c); ASSERT(MUTEX_HELD(&cpu_lock)); /* * We'll go through each cyclic on the CPU, attempting to juggle * each one elsewhere. */ for (idp = cyclic_id_head; idp != NULL; idp = idp->cyi_next) { if (idp->cyi_cpu != cpu) continue; if (cyclic_juggle_one(idp) == 0) { all_juggled = 0; continue; } ASSERT(idp->cyi_cpu != cpu); } return (all_juggled); } /* * int cyclic_offline(cpu_t *) * * Overview * * cyclic_offline() offlines the cyclic subsystem on the specified CPU. * * Arguments and notes * * The only argument to cyclic_offline() is a CPU to offline. * cyclic_offline() will attempt to juggle cyclics away from the specified * CPU. * * Return value * * cyclic_offline() returns 1 if all cyclics on the CPU were juggled away * and the cyclic subsystem on the CPU was successfully offlines. * cyclic_offline returns 0 if some cyclics remain, blocking the cyclic * offline operation. All remaining cyclics on the CPU will either be * CPU- or partition-bound. * * See the "Arguments and notes" of cyclic_juggle(), below, for more detail * on cyclic juggling. * * Caller's context * * The only caller of cyclic_offline() should be the processor management * subsystem. It is expected that the caller of cyclic_offline() will * offline the CPU immediately after cyclic_offline() returns success (i.e. * before dropping cpu_lock). Moreover, it is expected that the caller will * fail the CPU offline operation if cyclic_offline() returns failure. */ int cyclic_offline(cpu_t *c) { cyc_cpu_t *cpu = c->cpu_cyclic; cyc_id_t *idp; CYC_PTRACE1("offline", cpu); ASSERT(MUTEX_HELD(&cpu_lock)); if (!cyclic_juggle(c)) return (0); /* * This CPU is headed offline; we need to now stop omnipresent * cyclic firing on this CPU. */ for (idp = cyclic_id_head; idp != NULL; idp = idp->cyi_next) { if (idp->cyi_cpu != NULL) continue; /* * We cannot possibly be offlining the last CPU; cyi_omni_list * must be non-NULL. */ ASSERT(idp->cyi_omni_list != NULL); cyclic_omni_stop(idp, cpu); } ASSERT(cpu->cyp_state == CYS_ONLINE); cpu->cyp_state = CYS_OFFLINE; return (1); } /* * void cyclic_online(cpu_t *) * * Overview * * cyclic_online() onlines a CPU previously offlined with cyclic_offline(). * * Arguments and notes * * cyclic_online()'s only argument is a CPU to online. The specified * CPU must have been previously offlined with cyclic_offline(). After * cyclic_online() returns, the specified CPU will be eligible to execute * cyclics. * * Return value * * None; cyclic_online() always succeeds. * * Caller's context * * cyclic_online() should only be called by the processor management * subsystem; cpu_lock must be held. */ void cyclic_online(cpu_t *c) { cyc_cpu_t *cpu = c->cpu_cyclic; cyc_id_t *idp; CYC_PTRACE1("online", cpu); ASSERT(c->cpu_flags & CPU_ENABLE); ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(cpu->cyp_state == CYS_OFFLINE); cpu->cyp_state = CYS_ONLINE; /* * Now that this CPU is open for business, we need to start firing * all omnipresent cyclics on it. */ for (idp = cyclic_id_head; idp != NULL; idp = idp->cyi_next) { if (idp->cyi_cpu != NULL) continue; cyclic_omni_start(idp, cpu); } } /* * void cyclic_move_in(cpu_t *) * * Overview * * cyclic_move_in() is called by the CPU partition code immediately after * the specified CPU has moved into a new partition. * * Arguments and notes * * The only argument to cyclic_move_in() is a CPU which has moved into a * new partition. If the specified CPU is P_ONLINE, and every other * CPU in the specified CPU's new partition is P_NOINTR, cyclic_move_in() * will juggle all partition-bound, CPU-unbound cyclics to the specified * CPU. * * Return value * * None; cyclic_move_in() always succeeds. * * Caller's context * * cyclic_move_in() should _only_ be called immediately after a CPU has * moved into a new partition, with cpu_lock held. As with other calls * into the cyclic subsystem, no lock may be held which is also grabbed * by any cyclic handler. */ void cyclic_move_in(cpu_t *d) { cyc_id_t *idp; cyc_cpu_t *dest = d->cpu_cyclic; cyclic_t *cyclic; cpupart_t *part = d->cpu_part; CYC_PTRACE("move-in", dest, part); ASSERT(MUTEX_HELD(&cpu_lock)); /* * Look for CYF_PART_BOUND cyclics in the new partition. If * we find one, check to see if it is currently on a CPU which has * interrupts disabled. If it is (and if this CPU currently has * interrupts enabled), we'll juggle those cyclics over here. */ if (!(d->cpu_flags & CPU_ENABLE)) { CYC_PTRACE1("move-in-none", dest); return; } for (idp = cyclic_id_head; idp != NULL; idp = idp->cyi_next) { cyc_cpu_t *cpu = idp->cyi_cpu; cpu_t *c; /* * Omnipresent cyclics are exempt from juggling. */ if (cpu == NULL) continue; c = cpu->cyp_cpu; if (c->cpu_part != part || (c->cpu_flags & CPU_ENABLE)) continue; cyclic = &cpu->cyp_cyclics[idp->cyi_ndx]; if (cyclic->cy_flags & CYF_CPU_BOUND) continue; /* * We know that this cyclic is bound to its processor set * (otherwise, it would not be on a CPU with interrupts * disabled); juggle it to our CPU. */ ASSERT(cyclic->cy_flags & CYF_PART_BOUND); cyclic_juggle_one_to(idp, dest); } CYC_PTRACE1("move-in-done", dest); } /* * int cyclic_move_out(cpu_t *) * * Overview * * cyclic_move_out() is called by the CPU partition code immediately before * the specified CPU is to move out of its partition. * * Arguments and notes * * The only argument to cyclic_move_out() is a CPU which is to move out of * its partition. * * cyclic_move_out() will attempt to juggle away all partition-bound * cyclics. If the specified CPU is the last CPU in a partition with * partition-bound cyclics, cyclic_move_out() will fail. If there exists * a partition-bound cyclic which is CPU-bound to the specified CPU, * cyclic_move_out() will fail. * * Note that cyclic_move_out() will _only_ attempt to juggle away * partition-bound cyclics; CPU-bound cyclics which are not partition-bound * and unbound cyclics are not affected by changing the partition * affiliation of the CPU. * * Return value * * cyclic_move_out() returns 1 if all partition-bound cyclics on the CPU * were juggled away; 0 if some cyclics remain. * * Caller's context * * cyclic_move_out() should _only_ be called immediately before a CPU has * moved out of its partition, with cpu_lock held. It is expected that * the caller of cyclic_move_out() will change the processor set affiliation * of the specified CPU immediately after cyclic_move_out() returns * success (i.e. before dropping cpu_lock). Moreover, it is expected that * the caller will fail the CPU repartitioning operation if cyclic_move_out() * returns failure. As with other calls into the cyclic subsystem, no lock * may be held which is also grabbed by any cyclic handler. */ int cyclic_move_out(cpu_t *c) { cyc_id_t *idp; cyc_cpu_t *cpu = c->cpu_cyclic, *dest; cyclic_t *cyclic, *cyclics = cpu->cyp_cyclics; cpupart_t *part = c->cpu_part; CYC_PTRACE1("move-out", cpu); ASSERT(MUTEX_HELD(&cpu_lock)); /* * If there are any CYF_PART_BOUND cyclics on this CPU, we need * to try to juggle them away. */ for (idp = cyclic_id_head; idp != NULL; idp = idp->cyi_next) { if (idp->cyi_cpu != cpu) continue; cyclic = &cyclics[idp->cyi_ndx]; if (!(cyclic->cy_flags & CYF_PART_BOUND)) continue; dest = cyclic_pick_cpu(part, c, c, cyclic->cy_flags); if (dest == NULL) { /* * We can't juggle this cyclic; we need to return * failure (we won't bother trying to juggle away * other cyclics). */ CYC_PTRACE("move-out-fail", cpu, idp); return (0); } cyclic_juggle_one_to(idp, dest); } CYC_PTRACE1("move-out-done", cpu); return (1); } /* * void cyclic_suspend() * * Overview * * cyclic_suspend() suspends all cyclic activity throughout the cyclic * subsystem. It should be called only by subsystems which are attempting * to suspend the entire system (e.g. checkpoint/resume, dynamic * reconfiguration). * * Arguments and notes * * cyclic_suspend() takes no arguments. Each CPU with an active cyclic * disables its backend (offline CPUs disable their backends as part of * the cyclic_offline() operation), thereby disabling future CY_HIGH_LEVEL * interrupts. * * Note that disabling CY_HIGH_LEVEL interrupts does not completely preclude * cyclic handlers from being called after cyclic_suspend() returns: if a * CY_LOCK_LEVEL or CY_LOW_LEVEL interrupt thread was blocked at the time * of cyclic_suspend(), cyclic handlers at its level may continue to be * called after the interrupt thread becomes unblocked. The * post-cyclic_suspend() activity is bounded by the pend count on all * cyclics at the time of cyclic_suspend(). Callers concerned with more * than simply disabling future CY_HIGH_LEVEL interrupts must check for * this condition. * * On most platforms, timestamps from gethrtime() and gethrestime() are not * guaranteed to monotonically increase between cyclic_suspend() and * cyclic_resume(). However, timestamps are guaranteed to monotonically * increase across the entire cyclic_suspend()/cyclic_resume() operation. * That is, every timestamp obtained before cyclic_suspend() will be less * than every timestamp obtained after cyclic_resume(). * * Return value * * None; cyclic_suspend() always succeeds. * * Caller's context * * The cyclic subsystem must be configured on every valid CPU; * cyclic_suspend() may not be called during boot or during dynamic * reconfiguration. Additionally, cpu_lock must be held, and the caller * cannot be in high-level interrupt context. However, unlike most other * cyclic entry points, cyclic_suspend() may be called with locks held * which are also acquired by CY_LOCK_LEVEL or CY_LOW_LEVEL cyclic * handlers. */ void cyclic_suspend() { cpu_t *c; cyc_cpu_t *cpu; cyc_xcallarg_t arg; cyc_backend_t *be; CYC_PTRACE0("suspend"); ASSERT(MUTEX_HELD(&cpu_lock)); c = cpu_list; do { cpu = c->cpu_cyclic; be = cpu->cyp_backend; arg.cyx_cpu = cpu; be->cyb_xcall(be->cyb_arg, c, (cyc_func_t)cyclic_suspend_xcall, &arg); } while ((c = c->cpu_next) != cpu_list); } /* * void cyclic_resume() * * cyclic_resume() resumes all cyclic activity throughout the cyclic * subsystem. It should be called only by system-suspending subsystems. * * Arguments and notes * * cyclic_resume() takes no arguments. Each CPU with an active cyclic * reenables and reprograms its backend (offline CPUs are not reenabled). * On most platforms, timestamps from gethrtime() and gethrestime() are not * guaranteed to monotonically increase between cyclic_suspend() and * cyclic_resume(). However, timestamps are guaranteed to monotonically * increase across the entire cyclic_suspend()/cyclic_resume() operation. * That is, every timestamp obtained before cyclic_suspend() will be less * than every timestamp obtained after cyclic_resume(). * * Return value * * None; cyclic_resume() always succeeds. * * Caller's context * * The cyclic subsystem must be configured on every valid CPU; * cyclic_resume() may not be called during boot or during dynamic * reconfiguration. Additionally, cpu_lock must be held, and the caller * cannot be in high-level interrupt context. However, unlike most other * cyclic entry points, cyclic_resume() may be called with locks held which * are also acquired by CY_LOCK_LEVEL or CY_LOW_LEVEL cyclic handlers. */ void cyclic_resume() { cpu_t *c; cyc_cpu_t *cpu; cyc_xcallarg_t arg; cyc_backend_t *be; CYC_PTRACE0("resume"); ASSERT(MUTEX_HELD(&cpu_lock)); c = cpu_list; do { cpu = c->cpu_cyclic; be = cpu->cyp_backend; arg.cyx_cpu = cpu; be->cyb_xcall(be->cyb_arg, c, (cyc_func_t)cyclic_resume_xcall, &arg); } while ((c = c->cpu_next) != cpu_list); }