/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" /* * Open Host Controller Driver (OHCI) * * The USB Open Host Controller driver is a software driver which interfaces * to the Universal Serial Bus layer (USBA) and the USB Open Host Controller. * The interface to USB Open Host Controller is defined by the OpenHCI Host * Controller Interface. * * NOTE: * * Currently OHCI driver does not support the following features * * - Handle request with multiple TDs under short xfer conditions except for * bulk transfers. */ #include #include /* Pointer to the state structure */ static void *ohci_statep; /* Number of instances */ #define OHCI_INSTS 1 /* Adjustable variables for the size of the pools */ int ohci_ed_pool_size = OHCI_ED_POOL_SIZE; int ohci_td_pool_size = OHCI_TD_POOL_SIZE; /* * Initialize the values which are used for setting up head pointers for * the 32ms scheduling lists which starts from the HCCA. */ static uchar_t ohci_index[NUM_INTR_ED_LISTS / 2] = {0x0, 0x8, 0x4, 0xc, 0x2, 0xa, 0x6, 0xe, 0x1, 0x9, 0x5, 0xd, 0x3, 0xb, 0x7, 0xf}; /* Debugging information */ uint_t ohci_errmask = (uint_t)PRINT_MASK_ALL; uint_t ohci_errlevel = USB_LOG_L2; uint_t ohci_instance_debug = (uint_t)-1; /* * OHCI MSI tunable: * * By default MSI is enabled on all supported platforms. */ boolean_t ohci_enable_msi = B_TRUE; /* * HCDI entry points * * The Host Controller Driver Interfaces (HCDI) are the software interfaces * between the Universal Serial Bus Driver (USBA) and the Host Controller * Driver (HCD). The HCDI interfaces or entry points are subject to change. */ static int ohci_hcdi_pipe_open( usba_pipe_handle_data_t *ph, usb_flags_t usb_flags); static int ohci_hcdi_pipe_close( usba_pipe_handle_data_t *ph, usb_flags_t usb_flags); static int ohci_hcdi_pipe_reset( usba_pipe_handle_data_t *ph, usb_flags_t usb_flags); static int ohci_hcdi_pipe_ctrl_xfer( usba_pipe_handle_data_t *ph, usb_ctrl_req_t *ctrl_reqp, usb_flags_t usb_flags); static int ohci_hcdi_bulk_transfer_size( usba_device_t *usba_device, size_t *size); static int ohci_hcdi_pipe_bulk_xfer( usba_pipe_handle_data_t *ph, usb_bulk_req_t *bulk_reqp, usb_flags_t usb_flags); static int ohci_hcdi_pipe_intr_xfer( usba_pipe_handle_data_t *ph, usb_intr_req_t *intr_req, usb_flags_t usb_flags); static int ohci_hcdi_pipe_stop_intr_polling( usba_pipe_handle_data_t *ph, usb_flags_t usb_flags); static usb_frame_number_t ohci_hcdi_get_current_frame_number( usba_device_t *usba_device); static uint_t ohci_hcdi_get_max_isoc_pkts( usba_device_t *usba_device); static int ohci_hcdi_pipe_isoc_xfer( usba_pipe_handle_data_t *ph, usb_isoc_req_t *isoc_reqp, usb_flags_t usb_flags); static int ohci_hcdi_pipe_stop_isoc_polling( usba_pipe_handle_data_t *ph, usb_flags_t usb_flags); /* * Internal Function Prototypes */ /* Host Controller Driver (HCD) initialization functions */ static void ohci_set_dma_attributes(ohci_state_t *ohcip); static int ohci_allocate_pools(ohci_state_t *ohcip); static void ohci_decode_ddi_dma_addr_bind_handle_result( ohci_state_t *ohcip, int result); static int ohci_map_regs(ohci_state_t *ohcip); static int ohci_register_intrs_and_init_mutex( ohci_state_t *ohcip); static int ohci_add_intrs(ohci_state_t *ohcip, int intr_type); static int ohci_init_ctlr(ohci_state_t *ohcip); static int ohci_init_hcca(ohci_state_t *ohcip); static void ohci_build_interrupt_lattice( ohci_state_t *ohcip); static int ohci_take_control(ohci_state_t *ohcip); static usba_hcdi_ops_t *ohci_alloc_hcdi_ops( ohci_state_t *ohcip); /* Host Controller Driver (HCD) deinitialization functions */ static int ohci_cleanup(ohci_state_t *ohcip); static void ohci_rem_intrs(ohci_state_t *ohcip); static int ohci_cpr_suspend(ohci_state_t *ohcip); static int ohci_cpr_resume(ohci_state_t *ohcip); /* Bandwidth Allocation functions */ static int ohci_allocate_bandwidth(ohci_state_t *ohcip, usba_pipe_handle_data_t *ph, uint_t *node); static void ohci_deallocate_bandwidth(ohci_state_t *ohcip, usba_pipe_handle_data_t *ph); static int ohci_compute_total_bandwidth( usb_ep_descr_t *endpoint, usb_port_status_t port_status, uint_t *bandwidth); static int ohci_adjust_polling_interval( ohci_state_t *ohcip, usb_ep_descr_t *endpoint, usb_port_status_t port_status); static uint_t ohci_lattice_height(uint_t interval); static uint_t ohci_lattice_parent(uint_t node); static uint_t ohci_leftmost_leaf(uint_t node, uint_t height); static uint_t ohci_hcca_intr_index( uint_t node); static uint_t ohci_hcca_leaf_index( uint_t leaf); static uint_t ohci_pow_2(uint_t x); static uint_t ohci_log_2(uint_t x); /* Endpoint Descriptor (ED) related functions */ static uint_t ohci_unpack_endpoint(ohci_state_t *ohcip, usba_pipe_handle_data_t *ph); static void ohci_insert_ed(ohci_state_t *ohcip, usba_pipe_handle_data_t *ph); static void ohci_insert_ctrl_ed( ohci_state_t *ohcip, ohci_pipe_private_t *pp); static void ohci_insert_bulk_ed( ohci_state_t *ohcip, ohci_pipe_private_t *pp); static void ohci_insert_intr_ed( ohci_state_t *ohcip, ohci_pipe_private_t *pp); static void ohci_insert_isoc_ed( ohci_state_t *ohcip, ohci_pipe_private_t *pp); static void ohci_modify_sKip_bit(ohci_state_t *ohcip, ohci_pipe_private_t *pp, skip_bit_t action, usb_flags_t flag); static void ohci_remove_ed(ohci_state_t *ohcip, ohci_pipe_private_t *pp); static void ohci_remove_ctrl_ed( ohci_state_t *ohcip, ohci_pipe_private_t *pp); static void ohci_remove_bulk_ed( ohci_state_t *ohcip, ohci_pipe_private_t *pp); static void ohci_remove_periodic_ed( ohci_state_t *ohcip, ohci_pipe_private_t *pp); static void ohci_insert_ed_on_reclaim_list( ohci_state_t *ohcip, ohci_pipe_private_t *pp); static void ohci_detach_ed_from_list( ohci_state_t *ohcip, ohci_ed_t *ept, uint_t ept_type); static ohci_ed_t *ohci_ed_iommu_to_cpu( ohci_state_t *ohcip, uintptr_t addr); /* Transfer Descriptor (TD) related functions */ static int ohci_initialize_dummy(ohci_state_t *ohcip, ohci_ed_t *ept); static ohci_trans_wrapper_t *ohci_allocate_ctrl_resources( ohci_state_t *ohcip, ohci_pipe_private_t *pp, usb_ctrl_req_t *ctrl_reqp, usb_flags_t usb_flags); static void ohci_insert_ctrl_req( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph, usb_ctrl_req_t *ctrl_reqp, ohci_trans_wrapper_t *tw, usb_flags_t usb_flags); static ohci_trans_wrapper_t *ohci_allocate_bulk_resources( ohci_state_t *ohcip, ohci_pipe_private_t *pp, usb_bulk_req_t *bulk_reqp, usb_flags_t usb_flags); static void ohci_insert_bulk_req(ohci_state_t *ohcip, usba_pipe_handle_data_t *ph, usb_bulk_req_t *bulk_reqp, ohci_trans_wrapper_t *tw, usb_flags_t flags); static int ohci_start_pipe_polling(ohci_state_t *ohcip, usba_pipe_handle_data_t *ph, usb_flags_t flags); static void ohci_set_periodic_pipe_polling( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph); static ohci_trans_wrapper_t *ohci_allocate_intr_resources( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph, usb_intr_req_t *intr_reqp, usb_flags_t usb_flags); static void ohci_insert_intr_req(ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, usb_flags_t flags); static int ohci_stop_periodic_pipe_polling( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph, usb_flags_t flags); static ohci_trans_wrapper_t *ohci_allocate_isoc_resources( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph, usb_isoc_req_t *isoc_reqp, usb_flags_t usb_flags); static int ohci_insert_isoc_req(ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, uint_t flags); static int ohci_insert_hc_td(ohci_state_t *ohcip, uint_t hctd_ctrl, uint32_t hctd_dma_offs, size_t hctd_length, uint32_t hctd_ctrl_phase, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw); static ohci_td_t *ohci_allocate_td_from_pool( ohci_state_t *ohcip); static void ohci_fill_in_td(ohci_state_t *ohcip, ohci_td_t *td, ohci_td_t *new_dummy, uint_t hctd_ctrl, uint32_t hctd_dma_offs, size_t hctd_length, uint32_t hctd_ctrl_phase, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw); static void ohci_init_itd( ohci_state_t *ohcip, ohci_trans_wrapper_t *tw, uint_t hctd_ctrl, uint32_t index, ohci_td_t *td); static int ohci_insert_td_with_frame_number( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *current_td, ohci_td_t *dummy_td); static void ohci_insert_td_on_tw(ohci_state_t *ohcip, ohci_trans_wrapper_t *tw, ohci_td_t *td); static void ohci_done_list_tds(ohci_state_t *ohcip, usba_pipe_handle_data_t *ph); /* Transfer Wrapper (TW) functions */ static ohci_trans_wrapper_t *ohci_create_transfer_wrapper( ohci_state_t *ohcip, ohci_pipe_private_t *pp, size_t length, uint_t usb_flags); static ohci_trans_wrapper_t *ohci_create_isoc_transfer_wrapper( ohci_state_t *ohcip, ohci_pipe_private_t *pp, size_t length, usb_isoc_pkt_descr_t *descr, ushort_t pkt_count, size_t td_count, uint_t usb_flags); static int ohci_allocate_tds_for_tw( ohci_state_t *ohcip, ohci_trans_wrapper_t *tw, size_t td_count); static ohci_trans_wrapper_t *ohci_allocate_tw_resources( ohci_state_t *ohcip, ohci_pipe_private_t *pp, size_t length, usb_flags_t usb_flags, size_t td_count); static void ohci_free_tw_tds_resources( ohci_state_t *ohcip, ohci_trans_wrapper_t *tw); static void ohci_start_xfer_timer( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw); static void ohci_stop_xfer_timer( ohci_state_t *ohcip, ohci_trans_wrapper_t *tw, uint_t flag); static void ohci_xfer_timeout_handler(void *arg); static void ohci_remove_tw_from_timeout_list( ohci_state_t *ohcip, ohci_trans_wrapper_t *tw); static void ohci_start_timer(ohci_state_t *ohcip); static void ohci_free_dma_resources(ohci_state_t *ohcip, usba_pipe_handle_data_t *ph); static void ohci_free_tw(ohci_state_t *ohcip, ohci_trans_wrapper_t *tw); static int ohci_tw_rebind_cookie( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw); /* Interrupt Handling functions */ static uint_t ohci_intr(caddr_t arg1, caddr_t arg2); static void ohci_handle_missed_intr( ohci_state_t *ohcip); static void ohci_handle_ue(ohci_state_t *ohcip); static void ohci_handle_endpoint_reclaimation( ohci_state_t *ohcip); static void ohci_traverse_done_list( ohci_state_t *ohcip, ohci_td_t *head_done_list); static ohci_td_t *ohci_reverse_done_list( ohci_state_t *ohcip, ohci_td_t *head_done_list); static usb_cr_t ohci_parse_error(ohci_state_t *ohcip, ohci_td_t *td); static void ohci_parse_isoc_error( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *td); static usb_cr_t ohci_check_for_error( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *td, uint_t ctrl); static void ohci_handle_error( ohci_state_t *ohcip, ohci_td_t *td, usb_cr_t error); static int ohci_cleanup_data_underrun( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *td); static void ohci_handle_normal_td( ohci_state_t *ohcip, ohci_td_t *td, ohci_trans_wrapper_t *tw); static void ohci_handle_ctrl_td(ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *td, void *); static void ohci_handle_bulk_td(ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *td, void *); static void ohci_handle_intr_td(ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *td, void *); static void ohci_handle_one_xfer_completion( ohci_state_t *ohcip, ohci_trans_wrapper_t *tw); static void ohci_handle_isoc_td(ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *td, void *); static void ohci_sendup_td_message( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *td, usb_cr_t error); /* Miscillaneous functions */ static void ohci_cpr_cleanup( ohci_state_t *ohcip); static usb_req_attrs_t ohci_get_xfer_attrs(ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw); static int ohci_allocate_periodic_in_resource( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, usb_flags_t flags); static int ohci_wait_for_sof( ohci_state_t *ohcip); static void ohci_pipe_cleanup( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph); static void ohci_wait_for_transfers_completion( ohci_state_t *ohcip, ohci_pipe_private_t *pp); static void ohci_check_for_transfers_completion( ohci_state_t *ohcip, ohci_pipe_private_t *pp); static void ohci_save_data_toggle(ohci_state_t *ohcip, usba_pipe_handle_data_t *ph); static void ohci_restore_data_toggle(ohci_state_t *ohcip, usba_pipe_handle_data_t *ph); static void ohci_deallocate_periodic_in_resource( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw); static void ohci_do_client_periodic_in_req_callback( ohci_state_t *ohcip, ohci_pipe_private_t *pp, usb_cr_t completion_reason); static void ohci_hcdi_callback( usba_pipe_handle_data_t *ph, ohci_trans_wrapper_t *tw, usb_cr_t completion_reason); /* Kstat Support */ static void ohci_create_stats(ohci_state_t *ohcip); static void ohci_destroy_stats(ohci_state_t *ohcip); static void ohci_do_byte_stats( ohci_state_t *ohcip, size_t len, uint8_t attr, uint8_t addr); static void ohci_do_intrs_stats( ohci_state_t *ohcip, int val); static void ohci_print_op_regs(ohci_state_t *ohcip); static void ohci_print_ed(ohci_state_t *ohcip, ohci_ed_t *ed); static void ohci_print_td(ohci_state_t *ohcip, ohci_td_t *td); /* extern */ int usba_hubdi_root_hub_power(dev_info_t *dip, int comp, int level); /* * Device operations (dev_ops) entries function prototypes. * * We use the hub cbops since all nexus ioctl operations defined so far will * be executed by the root hub. The following are the Host Controller Driver * (HCD) entry points. * * the open/close/ioctl functions call the corresponding usba_hubdi_* * calls after looking up the dip thru the dev_t. */ static int ohci_open(dev_t *devp, int flags, int otyp, cred_t *credp); static int ohci_close(dev_t dev, int flag, int otyp, cred_t *credp); static int ohci_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, cred_t *credp, int *rvalp); static int ohci_attach(dev_info_t *dip, ddi_attach_cmd_t cmd); static int ohci_detach(dev_info_t *dip, ddi_detach_cmd_t cmd); static int ohci_info(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result); static struct cb_ops ohci_cb_ops = { ohci_open, /* Open */ ohci_close, /* Close */ nodev, /* Strategy */ nodev, /* Print */ nodev, /* Dump */ nodev, /* Read */ nodev, /* Write */ ohci_ioctl, /* Ioctl */ nodev, /* Devmap */ nodev, /* Mmap */ nodev, /* Segmap */ nochpoll, /* Poll */ ddi_prop_op, /* cb_prop_op */ NULL, /* Streamtab */ D_MP /* Driver compatibility flag */ }; static struct dev_ops ohci_ops = { DEVO_REV, /* Devo_rev */ 0, /* Refcnt */ ohci_info, /* Info */ nulldev, /* Identify */ nulldev, /* Probe */ ohci_attach, /* Attach */ ohci_detach, /* Detach */ nodev, /* Reset */ &ohci_cb_ops, /* Driver operations */ &usba_hubdi_busops, /* Bus operations */ usba_hubdi_root_hub_power /* Power */ }; /* * The USBA library must be loaded for this driver. */ static struct modldrv modldrv = { &mod_driverops, /* Type of module. This one is a driver */ "USB OpenHCI Driver %I%", /* Name of the module. */ &ohci_ops, /* Driver ops */ }; static struct modlinkage modlinkage = { MODREV_1, (void *)&modldrv, NULL }; int _init(void) { int error; /* Initialize the soft state structures */ if ((error = ddi_soft_state_init(&ohci_statep, sizeof (ohci_state_t), OHCI_INSTS)) != 0) { return (error); } /* Install the loadable module */ if ((error = mod_install(&modlinkage)) != 0) { ddi_soft_state_fini(&ohci_statep); } return (error); } int _info(struct modinfo *modinfop) { return (mod_info(&modlinkage, modinfop)); } int _fini(void) { int error; if ((error = mod_remove(&modlinkage)) == 0) { /* Release per module resources */ ddi_soft_state_fini(&ohci_statep); } return (error); } /* * Host Controller Driver (HCD) entry points */ /* * ohci_attach: */ static int ohci_attach(dev_info_t *dip, ddi_attach_cmd_t cmd) { int instance; ohci_state_t *ohcip = NULL; usba_hcdi_register_args_t hcdi_args; switch (cmd) { case DDI_ATTACH: break; case DDI_RESUME: ohcip = ohci_obtain_state(dip); return (ohci_cpr_resume(ohcip)); default: return (DDI_FAILURE); } /* Get the instance and create soft state */ instance = ddi_get_instance(dip); if (ddi_soft_state_zalloc(ohci_statep, instance) != 0) { return (DDI_FAILURE); } ohcip = ddi_get_soft_state(ohci_statep, instance); if (ohcip == NULL) { return (DDI_FAILURE); } ohcip->ohci_flags = OHCI_ATTACH; ohcip->ohci_log_hdl = usb_alloc_log_hdl(dip, "ohci", &ohci_errlevel, &ohci_errmask, &ohci_instance_debug, 0); ohcip->ohci_flags |= OHCI_ZALLOC; /* Set host controller soft state to initilization */ ohcip->ohci_hc_soft_state = OHCI_CTLR_INIT_STATE; USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohcip = 0x%p", (void *)ohcip); /* Initialize the DMA attributes */ ohci_set_dma_attributes(ohcip); /* Save the dip and instance */ ohcip->ohci_dip = dip; ohcip->ohci_instance = instance; /* Initialize the kstat structures */ ohci_create_stats(ohcip); /* Create the td and ed pools */ if (ohci_allocate_pools(ohcip) != DDI_SUCCESS) { (void) ohci_cleanup(ohcip); return (DDI_FAILURE); } /* Map the registers */ if (ohci_map_regs(ohcip) != DDI_SUCCESS) { (void) ohci_cleanup(ohcip); return (DDI_FAILURE); } /* Register interrupts */ if (ohci_register_intrs_and_init_mutex(ohcip) != DDI_SUCCESS) { (void) ohci_cleanup(ohcip); return (DDI_FAILURE); } mutex_enter(&ohcip->ohci_int_mutex); /* Initialize the controller */ if (ohci_init_ctlr(ohcip) != DDI_SUCCESS) { mutex_exit(&ohcip->ohci_int_mutex); (void) ohci_cleanup(ohcip); return (DDI_FAILURE); } /* * At this point, the hardware wiil be okay. * Initialize the usba_hcdi structure */ ohcip->ohci_hcdi_ops = ohci_alloc_hcdi_ops(ohcip); mutex_exit(&ohcip->ohci_int_mutex); /* * Make this HCD instance known to USBA * (dma_attr must be passed for USBA busctl's) */ hcdi_args.usba_hcdi_register_version = HCDI_REGISTER_VERSION; hcdi_args.usba_hcdi_register_dip = dip; hcdi_args.usba_hcdi_register_ops = ohcip->ohci_hcdi_ops; hcdi_args.usba_hcdi_register_dma_attr = &ohcip->ohci_dma_attr; /* * Priority and iblock_cookie are one and the same * (However, retaining hcdi_soft_iblock_cookie for now * assigning it w/ priority. In future all iblock_cookie * could just go) */ hcdi_args.usba_hcdi_register_iblock_cookie = (ddi_iblock_cookie_t)(uintptr_t)ohcip->ohci_intr_pri; if (usba_hcdi_register(&hcdi_args, 0) != DDI_SUCCESS) { (void) ohci_cleanup(ohcip); return (DDI_FAILURE); } ohcip->ohci_flags |= OHCI_USBAREG; mutex_enter(&ohcip->ohci_int_mutex); if ((ohci_init_root_hub(ohcip)) != USB_SUCCESS) { mutex_exit(&ohcip->ohci_int_mutex); (void) ohci_cleanup(ohcip); return (DDI_FAILURE); } mutex_exit(&ohcip->ohci_int_mutex); /* Finally load the root hub driver */ if (ohci_load_root_hub_driver(ohcip) != USB_SUCCESS) { (void) ohci_cleanup(ohcip); return (DDI_FAILURE); } ohcip->ohci_flags |= OHCI_RHREG; /* Display information in the banner */ ddi_report_dev(dip); mutex_enter(&ohcip->ohci_int_mutex); /* Reset the ohci initilization flag */ ohcip->ohci_flags &= ~OHCI_ATTACH; /* Print the Host Control's Operational registers */ ohci_print_op_regs(ohcip); /* For RIO we need to call pci_report_pmcap */ if (OHCI_IS_RIO(ohcip)) { (void) pci_report_pmcap(dip, PCI_PM_IDLESPEED, (void *)4000); } mutex_exit(&ohcip->ohci_int_mutex); USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_attach: dip = 0x%p done", (void *)dip); return (DDI_SUCCESS); } /* * ohci_detach: */ int ohci_detach(dev_info_t *dip, ddi_detach_cmd_t cmd) { ohci_state_t *ohcip = ohci_obtain_state(dip); USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_detach:"); switch (cmd) { case DDI_DETACH: return (ohci_cleanup(ohcip)); case DDI_SUSPEND: return (ohci_cpr_suspend(ohcip)); default: return (DDI_FAILURE); } } /* * ohci_info: */ /* ARGSUSED */ static int ohci_info(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result) { dev_t dev; ohci_state_t *ohcip; int instance; int error = DDI_FAILURE; switch (infocmd) { case DDI_INFO_DEVT2DEVINFO: dev = (dev_t)arg; instance = OHCI_UNIT(dev); ohcip = ddi_get_soft_state(ohci_statep, instance); if (ohcip != NULL) { *result = (void *)ohcip->ohci_dip; if (*result != NULL) { error = DDI_SUCCESS; } } else { *result = NULL; } break; case DDI_INFO_DEVT2INSTANCE: dev = (dev_t)arg; instance = OHCI_UNIT(dev); *result = (void *)(uintptr_t)instance; error = DDI_SUCCESS; break; default: break; } return (error); } /* * cb_ops entry points */ static dev_info_t * ohci_get_dip(dev_t dev) { int instance = OHCI_UNIT(dev); ohci_state_t *ohcip = ddi_get_soft_state(ohci_statep, instance); if (ohcip) { return (ohcip->ohci_dip); } else { return (NULL); } } static int ohci_open(dev_t *devp, int flags, int otyp, cred_t *credp) { dev_info_t *dip = ohci_get_dip(*devp); return (usba_hubdi_open(dip, devp, flags, otyp, credp)); } static int ohci_close(dev_t dev, int flag, int otyp, cred_t *credp) { dev_info_t *dip = ohci_get_dip(dev); return (usba_hubdi_close(dip, dev, flag, otyp, credp)); } static int ohci_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, cred_t *credp, int *rvalp) { dev_info_t *dip = ohci_get_dip(dev); return (usba_hubdi_ioctl(dip, dev, cmd, arg, mode, credp, rvalp)); } /* * Host Controller Driver (HCD) initialization functions */ /* * ohci_set_dma_attributes: * * Set the limits in the DMA attributes structure. Most of the values used * in the DMA limit structres are the default values as specified by the * Writing PCI device drivers document. */ static void ohci_set_dma_attributes(ohci_state_t *ohcip) { USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_set_dma_attributes:"); /* Initialize the DMA attributes */ ohcip->ohci_dma_attr.dma_attr_version = DMA_ATTR_V0; ohcip->ohci_dma_attr.dma_attr_addr_lo = 0x00000000ull; ohcip->ohci_dma_attr.dma_attr_addr_hi = 0xfffffffeull; /* 32 bit addressing */ ohcip->ohci_dma_attr.dma_attr_count_max = OHCI_DMA_ATTR_COUNT_MAX; /* Byte alignment */ ohcip->ohci_dma_attr.dma_attr_align = OHCI_DMA_ATTR_ALIGNMENT; /* * Since PCI specification is byte alignment, the * burstsize field should be set to 1 for PCI devices. */ ohcip->ohci_dma_attr.dma_attr_burstsizes = 0x1; ohcip->ohci_dma_attr.dma_attr_minxfer = 0x1; ohcip->ohci_dma_attr.dma_attr_maxxfer = OHCI_DMA_ATTR_MAX_XFER; ohcip->ohci_dma_attr.dma_attr_seg = 0xffffffffull; ohcip->ohci_dma_attr.dma_attr_sgllen = 1; ohcip->ohci_dma_attr.dma_attr_granular = OHCI_DMA_ATTR_GRANULAR; ohcip->ohci_dma_attr.dma_attr_flags = 0; } /* * ohci_allocate_pools: * * Allocate the system memory for the Endpoint Descriptor (ED) and for the * Transfer Descriptor (TD) pools. Both ED and TD structures must be aligned * to a 16 byte boundary. */ static int ohci_allocate_pools(ohci_state_t *ohcip) { ddi_device_acc_attr_t dev_attr; size_t real_length; int result; uint_t ccount; int i; USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_allocate_pools:"); /* The host controller will be little endian */ dev_attr.devacc_attr_version = DDI_DEVICE_ATTR_V0; dev_attr.devacc_attr_endian_flags = DDI_STRUCTURE_LE_ACC; dev_attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC; /* Byte alignment to TD alignment */ ohcip->ohci_dma_attr.dma_attr_align = OHCI_DMA_ATTR_TD_ALIGNMENT; /* Allocate the TD pool DMA handle */ if (ddi_dma_alloc_handle(ohcip->ohci_dip, &ohcip->ohci_dma_attr, DDI_DMA_SLEEP, 0, &ohcip->ohci_td_pool_dma_handle) != DDI_SUCCESS) { return (DDI_FAILURE); } /* Allocate the memory for the TD pool */ if (ddi_dma_mem_alloc(ohcip->ohci_td_pool_dma_handle, ohci_td_pool_size * sizeof (ohci_td_t), &dev_attr, DDI_DMA_CONSISTENT, DDI_DMA_SLEEP, 0, (caddr_t *)&ohcip->ohci_td_pool_addr, &real_length, &ohcip->ohci_td_pool_mem_handle)) { return (DDI_FAILURE); } /* Map the TD pool into the I/O address space */ result = ddi_dma_addr_bind_handle( ohcip->ohci_td_pool_dma_handle, NULL, (caddr_t)ohcip->ohci_td_pool_addr, real_length, DDI_DMA_RDWR | DDI_DMA_CONSISTENT, DDI_DMA_SLEEP, NULL, &ohcip->ohci_td_pool_cookie, &ccount); bzero((void *)ohcip->ohci_td_pool_addr, ohci_td_pool_size * sizeof (ohci_td_t)); /* Process the result */ if (result == DDI_DMA_MAPPED) { /* The cookie count should be 1 */ if (ccount != 1) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_allocate_pools: More than 1 cookie"); return (DDI_FAILURE); } } else { USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_allocate_pools: Result = %d", result); ohci_decode_ddi_dma_addr_bind_handle_result(ohcip, result); return (DDI_FAILURE); } /* * DMA addresses for TD pools are bound */ ohcip->ohci_dma_addr_bind_flag |= OHCI_TD_POOL_BOUND; /* Initialize the TD pool */ for (i = 0; i < ohci_td_pool_size; i ++) { Set_TD(ohcip->ohci_td_pool_addr[i].hctd_state, HC_TD_FREE); } /* Byte alignment to ED alignment */ ohcip->ohci_dma_attr.dma_attr_align = OHCI_DMA_ATTR_ED_ALIGNMENT; /* Allocate the ED pool DMA handle */ if (ddi_dma_alloc_handle(ohcip->ohci_dip, &ohcip->ohci_dma_attr, DDI_DMA_SLEEP, 0, &ohcip->ohci_ed_pool_dma_handle) != DDI_SUCCESS) { return (DDI_FAILURE); } /* Allocate the memory for the ED pool */ if (ddi_dma_mem_alloc(ohcip->ohci_ed_pool_dma_handle, ohci_ed_pool_size * sizeof (ohci_ed_t), &dev_attr, DDI_DMA_CONSISTENT, DDI_DMA_SLEEP, 0, (caddr_t *)&ohcip->ohci_ed_pool_addr, &real_length, &ohcip->ohci_ed_pool_mem_handle) != DDI_SUCCESS) { return (DDI_FAILURE); } result = ddi_dma_addr_bind_handle(ohcip->ohci_ed_pool_dma_handle, NULL, (caddr_t)ohcip->ohci_ed_pool_addr, real_length, DDI_DMA_RDWR | DDI_DMA_CONSISTENT, DDI_DMA_SLEEP, NULL, &ohcip->ohci_ed_pool_cookie, &ccount); bzero((void *)ohcip->ohci_ed_pool_addr, ohci_ed_pool_size * sizeof (ohci_ed_t)); /* Process the result */ if (result == DDI_DMA_MAPPED) { /* The cookie count should be 1 */ if (ccount != 1) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_allocate_pools: More than 1 cookie"); return (DDI_FAILURE); } } else { ohci_decode_ddi_dma_addr_bind_handle_result(ohcip, result); return (DDI_FAILURE); } /* * DMA addresses for ED pools are bound */ ohcip->ohci_dma_addr_bind_flag |= OHCI_ED_POOL_BOUND; /* Initialize the ED pool */ for (i = 0; i < ohci_ed_pool_size; i ++) { Set_ED(ohcip->ohci_ed_pool_addr[i].hced_state, HC_EPT_FREE); } return (DDI_SUCCESS); } /* * ohci_decode_ddi_dma_addr_bind_handle_result: * * Process the return values of ddi_dma_addr_bind_handle() */ static void ohci_decode_ddi_dma_addr_bind_handle_result( ohci_state_t *ohcip, int result) { USB_DPRINTF_L2(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_decode_ddi_dma_addr_bind_handle_result:"); switch (result) { case DDI_DMA_PARTIAL_MAP: USB_DPRINTF_L2(PRINT_MASK_ALL, ohcip->ohci_log_hdl, "Partial transfers not allowed"); break; case DDI_DMA_INUSE: USB_DPRINTF_L2(PRINT_MASK_ALL, ohcip->ohci_log_hdl, "Handle is in use"); break; case DDI_DMA_NORESOURCES: USB_DPRINTF_L2(PRINT_MASK_ALL, ohcip->ohci_log_hdl, "No resources"); break; case DDI_DMA_NOMAPPING: USB_DPRINTF_L2(PRINT_MASK_ALL, ohcip->ohci_log_hdl, "No mapping"); break; case DDI_DMA_TOOBIG: USB_DPRINTF_L2(PRINT_MASK_ALL, ohcip->ohci_log_hdl, "Object is too big"); break; default: USB_DPRINTF_L2(PRINT_MASK_ALL, ohcip->ohci_log_hdl, "Unknown dma error"); } } /* * ohci_map_regs: * * The Host Controller (HC) contains a set of on-chip operational registers * and which should be mapped into a non-cacheable portion of the system * addressable space. */ static int ohci_map_regs(ohci_state_t *ohcip) { ddi_device_acc_attr_t attr; uint16_t cmd_reg; USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_map_regs:"); /* The host controller will be little endian */ attr.devacc_attr_version = DDI_DEVICE_ATTR_V0; attr.devacc_attr_endian_flags = DDI_STRUCTURE_LE_ACC; attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC; /* Map in operational registers */ if (ddi_regs_map_setup(ohcip->ohci_dip, 1, (caddr_t *)&ohcip->ohci_regsp, 0, sizeof (ohci_regs_t), &attr, &ohcip->ohci_regs_handle) != DDI_SUCCESS) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_map_regs: Map setup error"); return (DDI_FAILURE); } if (pci_config_setup(ohcip->ohci_dip, &ohcip->ohci_config_handle) != DDI_SUCCESS) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_map_regs: Config error"); return (DDI_FAILURE); } /* Make sure Memory Access Enable and Master Enable are set */ cmd_reg = pci_config_get16(ohcip->ohci_config_handle, PCI_CONF_COMM); if (!(cmd_reg & PCI_COMM_MAE)) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_map_regs: Memory base address access disabled"); return (DDI_FAILURE); } cmd_reg |= (PCI_COMM_MAE | PCI_COMM_ME); pci_config_put16(ohcip->ohci_config_handle, PCI_CONF_COMM, cmd_reg); return (DDI_SUCCESS); } /* * The following simulated polling is for debugging purposes only. * It is activated on x86 by setting usb-polling=true in GRUB or ohci.conf. */ static int ohci_is_polled(dev_info_t *dip) { int ret; char *propval; if (ddi_prop_lookup_string(DDI_DEV_T_ANY, dip, 0, "usb-polling", &propval) != DDI_SUCCESS) return (0); ret = (strcmp(propval, "true") == 0); ddi_prop_free(propval); return (ret); } static void ohci_poll_intr(void *arg) { /* poll every millisecond */ for (;;) { (void) ohci_intr(arg, NULL); delay(drv_usectohz(1000)); } } /* * ohci_register_intrs_and_init_mutex: * * Register interrupts and initialize each mutex and condition variables */ static int ohci_register_intrs_and_init_mutex(ohci_state_t *ohcip) { int intr_types; USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_register_intrs_and_init_mutex:"); if (ohci_is_polled(ohcip->ohci_dip)) { extern pri_t maxclsyspri; USB_DPRINTF_L1(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_register_intrs_and_init_mutex: " "running in simulated polled mode"); (void) thread_create(NULL, 0, ohci_poll_intr, ohcip, 0, &p0, TS_RUN, maxclsyspri); goto skip_intr; } /* Get supported interrupt types */ if (ddi_intr_get_supported_types(ohcip->ohci_dip, &intr_types) != DDI_SUCCESS) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_register_intrs_and_init_mutex: " "ddi_intr_get_supported_types failed"); return (DDI_FAILURE); } USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_register_intrs_and_init_mutex: " "supported interrupt types 0x%x", intr_types); if ((intr_types & DDI_INTR_TYPE_MSI) && ohci_enable_msi) { if (ohci_add_intrs(ohcip, DDI_INTR_TYPE_MSI) != DDI_SUCCESS) { USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_register_intrs_and_init_mutex: MSI " "registration failed, trying FIXED interrupt \n"); } else { USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_register_intrs_and_init_mutex: " "Using MSI interrupt type\n"); ohcip->ohci_intr_type = DDI_INTR_TYPE_MSI; ohcip->ohci_flags |= OHCI_INTR; } } if ((!(ohcip->ohci_flags & OHCI_INTR)) && (intr_types & DDI_INTR_TYPE_FIXED)) { if (ohci_add_intrs(ohcip, DDI_INTR_TYPE_FIXED) != DDI_SUCCESS) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_register_intrs_and_init_mutex: " "FIXED interrupt registration failed\n"); return (DDI_FAILURE); } USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_register_intrs_and_init_mutex: " "Using FIXED interrupt type\n"); ohcip->ohci_intr_type = DDI_INTR_TYPE_FIXED; ohcip->ohci_flags |= OHCI_INTR; } skip_intr: /* Create prototype for SOF condition variable */ cv_init(&ohcip->ohci_SOF_cv, NULL, CV_DRIVER, NULL); /* Semaphore to serialize opens and closes */ sema_init(&ohcip->ohci_ocsem, 1, NULL, SEMA_DRIVER, NULL); return (DDI_SUCCESS); } /* * ohci_add_intrs: * * Register FIXED or MSI interrupts. */ static int ohci_add_intrs(ohci_state_t *ohcip, int intr_type) { int actual, avail, intr_size, count = 0; int i, flag, ret; USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_add_intrs: interrupt type 0x%x", intr_type); /* Get number of interrupts */ ret = ddi_intr_get_nintrs(ohcip->ohci_dip, intr_type, &count); if ((ret != DDI_SUCCESS) || (count == 0)) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_add_intrs: ddi_intr_get_nintrs() failure, " "ret: %d, count: %d", ret, count); return (DDI_FAILURE); } /* Get number of available interrupts */ ret = ddi_intr_get_navail(ohcip->ohci_dip, intr_type, &avail); if ((ret != DDI_SUCCESS) || (avail == 0)) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_add_intrs: ddi_intr_get_navail() failure, " "ret: %d, count: %d", ret, count); return (DDI_FAILURE); } if (avail < count) { USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_add_intrs: ohci_add_intrs: nintrs () " "returned %d, navail returned %d\n", count, avail); } /* Allocate an array of interrupt handles */ intr_size = count * sizeof (ddi_intr_handle_t); ohcip->ohci_htable = kmem_zalloc(intr_size, KM_SLEEP); flag = (intr_type == DDI_INTR_TYPE_MSI) ? DDI_INTR_ALLOC_STRICT:DDI_INTR_ALLOC_NORMAL; /* call ddi_intr_alloc() */ ret = ddi_intr_alloc(ohcip->ohci_dip, ohcip->ohci_htable, intr_type, 0, count, &actual, flag); if ((ret != DDI_SUCCESS) || (actual == 0)) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_add_intrs: ddi_intr_alloc() failed %d", ret); kmem_free(ohcip->ohci_htable, intr_size); return (DDI_FAILURE); } if (actual < count) { USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_add_intrs: Requested: %d, Received: %d\n", count, actual); for (i = 0; i < actual; i++) (void) ddi_intr_free(ohcip->ohci_htable[i]); kmem_free(ohcip->ohci_htable, intr_size); return (DDI_FAILURE); } ohcip->ohci_intr_cnt = actual; if ((ret = ddi_intr_get_pri(ohcip->ohci_htable[0], &ohcip->ohci_intr_pri)) != DDI_SUCCESS) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_add_intrs: ddi_intr_get_pri() failed %d", ret); for (i = 0; i < actual; i++) (void) ddi_intr_free(ohcip->ohci_htable[i]); kmem_free(ohcip->ohci_htable, intr_size); return (DDI_FAILURE); } USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_add_intrs: Supported Interrupt priority 0x%x", ohcip->ohci_intr_pri); /* Test for high level mutex */ if (ohcip->ohci_intr_pri >= ddi_intr_get_hilevel_pri()) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_add_intrs: Hi level interrupt not supported"); for (i = 0; i < actual; i++) (void) ddi_intr_free(ohcip->ohci_htable[i]); kmem_free(ohcip->ohci_htable, intr_size); return (DDI_FAILURE); } /* Initialize the mutex */ mutex_init(&ohcip->ohci_int_mutex, NULL, MUTEX_DRIVER, DDI_INTR_PRI(ohcip->ohci_intr_pri)); /* Call ddi_intr_add_handler() */ for (i = 0; i < actual; i++) { if ((ret = ddi_intr_add_handler(ohcip->ohci_htable[i], ohci_intr, (caddr_t)ohcip, (caddr_t)(uintptr_t)i)) != DDI_SUCCESS) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_add_intrs: ddi_intr_add_handler() " "failed %d", ret); for (i = 0; i < actual; i++) (void) ddi_intr_free(ohcip->ohci_htable[i]); mutex_destroy(&ohcip->ohci_int_mutex); kmem_free(ohcip->ohci_htable, intr_size); return (DDI_FAILURE); } } if ((ret = ddi_intr_get_cap(ohcip->ohci_htable[0], &ohcip->ohci_intr_cap)) != DDI_SUCCESS) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_add_intrs: ddi_intr_get_cap() failed %d", ret); for (i = 0; i < actual; i++) { (void) ddi_intr_remove_handler(ohcip->ohci_htable[i]); (void) ddi_intr_free(ohcip->ohci_htable[i]); } mutex_destroy(&ohcip->ohci_int_mutex); kmem_free(ohcip->ohci_htable, intr_size); return (DDI_FAILURE); } /* Enable all interrupts */ if (ohcip->ohci_intr_cap & DDI_INTR_FLAG_BLOCK) { /* Call ddi_intr_block_enable() for MSI interrupts */ (void) ddi_intr_block_enable(ohcip->ohci_htable, ohcip->ohci_intr_cnt); } else { /* Call ddi_intr_enable for MSI or FIXED interrupts */ for (i = 0; i < ohcip->ohci_intr_cnt; i++) (void) ddi_intr_enable(ohcip->ohci_htable[i]); } return (DDI_SUCCESS); } /* * ohci_init_ctlr: * * Initialize the Host Controller (HC). */ static int ohci_init_ctlr(ohci_state_t *ohcip) { int revision, curr_control, max_packet = 0; clock_t sof_time_wait; int retry = 0; int ohci_frame_interval; USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_init_ctlr:"); if (ohci_take_control(ohcip) != DDI_SUCCESS) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_init_ctlr: ohci_take_control failed\n"); return (DDI_FAILURE); } /* * Soft reset the host controller. * * On soft reset, the ohci host controller moves to the * USB Suspend state in which most of the ohci operational * registers are reset except stated ones. The soft reset * doesn't cause a reset to the ohci root hub and even no * subsequent reset signaling should be asserterd to its * down stream. */ Set_OpReg(hcr_cmd_status, HCR_STATUS_RESET); /* Wait 10ms for reset to complete */ drv_usecwait(OHCI_RESET_TIMEWAIT); /* * Do hard reset the host controller. * * Now perform USB reset in order to reset the ohci root * hub. */ Set_OpReg(hcr_control, HCR_CONTROL_RESET); /* * According to Section 5.1.2.3 of the specification, the * host controller will go into suspend state immediately * after the reset. */ /* Verify the version number */ revision = Get_OpReg(hcr_revision); if ((revision & HCR_REVISION_MASK) != HCR_REVISION_1_0) { return (DDI_FAILURE); } USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_init_ctlr: Revision verified"); /* hcca area need not be initialized on resume */ if (ohcip->ohci_hc_soft_state == OHCI_CTLR_INIT_STATE) { /* Get the ohci chip vendor and device id */ ohcip->ohci_vendor_id = pci_config_get16( ohcip->ohci_config_handle, PCI_CONF_VENID); ohcip->ohci_device_id = pci_config_get16( ohcip->ohci_config_handle, PCI_CONF_DEVID); ohcip->ohci_rev_id = pci_config_get8( ohcip->ohci_config_handle, PCI_CONF_REVID); /* Initialize the hcca area */ if (ohci_init_hcca(ohcip) != DDI_SUCCESS) { return (DDI_FAILURE); } } /* * Workaround for ULI1575 chipset. Following OHCI Operational Memory * Registers are not cleared to their default value on reset. * Explicitly set the registers to default value. */ if (ohcip->ohci_vendor_id == PCI_ULI1575_VENID && ohcip->ohci_device_id == PCI_ULI1575_DEVID) { Set_OpReg(hcr_control, HCR_CONTROL_DEFAULT); Set_OpReg(hcr_intr_enable, HCR_INT_ENABLE_DEFAULT); Set_OpReg(hcr_HCCA, HCR_HCCA_DEFAULT); Set_OpReg(hcr_ctrl_head, HCR_CONTROL_HEAD_ED_DEFAULT); Set_OpReg(hcr_bulk_head, HCR_BULK_HEAD_ED_DEFAULT); Set_OpReg(hcr_frame_interval, HCR_FRAME_INTERVAL_DEFAULT); Set_OpReg(hcr_periodic_strt, HCR_PERIODIC_START_DEFAULT); } /* Set the HcHCCA to the physical address of the HCCA block */ Set_OpReg(hcr_HCCA, (uint_t)ohcip->ohci_hcca_cookie.dmac_address); /* * Set HcInterruptEnable to enable all interrupts except Root * Hub Status change and SOF interrupts. */ Set_OpReg(hcr_intr_enable, HCR_INTR_SO | HCR_INTR_WDH | HCR_INTR_RD | HCR_INTR_UE | HCR_INTR_FNO | HCR_INTR_MIE); /* * For non-periodic transfers, reserve atleast for one low-speed * device transaction. According to USB Bandwidth Analysis white * paper and also as per OHCI Specification 1.0a, section 7.3.5, * page 123, one low-speed transaction takes 0x628h full speed * bits (197 bytes), which comes to around 13% of USB frame time. * * The periodic transfers will get around 87% of USB frame time. */ Set_OpReg(hcr_periodic_strt, ((PERIODIC_XFER_STARTS * BITS_PER_BYTE) - 1)); /* Save the contents of the Frame Interval Registers */ ohcip->ohci_frame_interval = Get_OpReg(hcr_frame_interval); /* * Initialize the FSLargestDataPacket value in the frame interval * register. The controller compares the value of MaxPacketSize to * this value to see if the entire packet may be sent out before * the EOF. */ max_packet = ((((ohcip->ohci_frame_interval - MAX_OVERHEAD) * 6) / 7) << HCR_FRME_FSMPS_SHFT); Set_OpReg(hcr_frame_interval, (max_packet | ohcip->ohci_frame_interval)); /* * Sometimes the HcFmInterval register in OHCI controller does not * maintain its value after the first write. This problem is found * on ULI M1575 South Bridge. To workaround the hardware problem, * check the value after write and retry if the last write failed. */ if (ohcip->ohci_vendor_id == PCI_ULI1575_VENID && ohcip->ohci_device_id == PCI_ULI1575_DEVID) { ohci_frame_interval = Get_OpReg(hcr_frame_interval); while ((ohci_frame_interval != (max_packet | ohcip->ohci_frame_interval))) { if (retry >= 10) { USB_DPRINTF_L1(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_init_ctlr:" " Failed to program Frame" " Interval Register, giving up."); return (DDI_FAILURE); } retry++; USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_init_ctlr: Failed to program Frame" " Interval Register, retry=%d", retry); Set_OpReg(hcr_frame_interval, (max_packet | ohcip->ohci_frame_interval)); ohci_frame_interval = Get_OpReg(hcr_frame_interval); } } /* Begin sending SOFs */ curr_control = Get_OpReg(hcr_control); USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_init_ctlr: curr_control=0x%x", curr_control); /* Set the state to operational */ curr_control = (curr_control & (~HCR_CONTROL_HCFS)) | HCR_CONTROL_OPERAT; Set_OpReg(hcr_control, curr_control); ASSERT((Get_OpReg(hcr_control) & HCR_CONTROL_HCFS) == HCR_CONTROL_OPERAT); /* Set host controller soft state to operational */ ohcip->ohci_hc_soft_state = OHCI_CTLR_OPERATIONAL_STATE; /* Get the number of clock ticks to wait */ sof_time_wait = drv_usectohz(OHCI_MAX_SOF_TIMEWAIT * 1000000); /* Clear ohci_sof_flag indicating waiting for SOF interrupt */ ohcip->ohci_sof_flag = B_FALSE; /* Enable the SOF interrupt */ Set_OpReg(hcr_intr_enable, HCR_INTR_SOF); ASSERT(Get_OpReg(hcr_intr_enable) & HCR_INTR_SOF); (void) cv_timedwait(&ohcip->ohci_SOF_cv, &ohcip->ohci_int_mutex, ddi_get_lbolt() + sof_time_wait); /* Wait for the SOF or timeout event */ if (ohcip->ohci_sof_flag == B_FALSE) { /* Set host controller soft state to error */ ohcip->ohci_hc_soft_state = OHCI_CTLR_ERROR_STATE; USB_DPRINTF_L0(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "No SOF interrupts have been received, this USB OHCI host" "controller is unusable"); return (DDI_FAILURE); } USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_init_ctlr: SOF's have started"); return (DDI_SUCCESS); } /* * ohci_init_hcca: * * Allocate the system memory and initialize Host Controller Communication * Area (HCCA). The HCCA structure must be aligned to a 256-byte boundary. */ static int ohci_init_hcca(ohci_state_t *ohcip) { ddi_device_acc_attr_t dev_attr; size_t real_length; uint_t mask, ccount; int result; uintptr_t addr; ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_init_hcca:"); /* The host controller will be little endian */ dev_attr.devacc_attr_version = DDI_DEVICE_ATTR_V0; dev_attr.devacc_attr_endian_flags = DDI_STRUCTURE_LE_ACC; dev_attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC; /* Byte alignment to HCCA alignment */ ohcip->ohci_dma_attr.dma_attr_align = OHCI_DMA_ATTR_HCCA_ALIGNMENT; /* Create space for the HCCA block */ if (ddi_dma_alloc_handle(ohcip->ohci_dip, &ohcip->ohci_dma_attr, DDI_DMA_SLEEP, 0, &ohcip->ohci_hcca_dma_handle) != DDI_SUCCESS) { return (DDI_FAILURE); } if (ddi_dma_mem_alloc(ohcip->ohci_hcca_dma_handle, 2 * sizeof (ohci_hcca_t), &dev_attr, DDI_DMA_CONSISTENT, DDI_DMA_SLEEP, 0, (caddr_t *)&ohcip->ohci_hccap, &real_length, &ohcip->ohci_hcca_mem_handle)) { return (DDI_FAILURE); } bzero((void *)ohcip->ohci_hccap, real_length); /* Figure out the alignment requirements */ Set_OpReg(hcr_HCCA, 0xFFFFFFFF); /* * Read the hcr_HCCA register until * contenets are non-zero. */ mask = Get_OpReg(hcr_HCCA); while (mask == 0) { drv_usecwait(OHCI_TIMEWAIT); mask = Get_OpReg(hcr_HCCA); } ASSERT(mask != 0); addr = (uintptr_t)ohcip->ohci_hccap; USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_init_hcca: addr=0x%lx, mask=0x%x", addr, mask); while (addr & (~mask)) { addr++; } ohcip->ohci_hccap = (ohci_hcca_t *)addr; USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_init_hcca: Real length %lu", real_length); USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_init_hcca: virtual hcca 0x%p", (void *)ohcip->ohci_hccap); /* Map the whole HCCA into the I/O address space */ result = ddi_dma_addr_bind_handle(ohcip->ohci_hcca_dma_handle, NULL, (caddr_t)ohcip->ohci_hccap, real_length, DDI_DMA_RDWR | DDI_DMA_CONSISTENT, DDI_DMA_SLEEP, NULL, &ohcip->ohci_hcca_cookie, &ccount); if (result == DDI_DMA_MAPPED) { /* The cookie count should be 1 */ if (ccount != 1) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_init_hcca: More than 1 cookie"); return (DDI_FAILURE); } } else { ohci_decode_ddi_dma_addr_bind_handle_result(ohcip, result); return (DDI_FAILURE); } /* * DMA addresses for HCCA are bound */ ohcip->ohci_dma_addr_bind_flag |= OHCI_HCCA_DMA_BOUND; USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_init_hcca: physical 0x%p", (void *)(uintptr_t)ohcip->ohci_hcca_cookie.dmac_address); USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_init_hcca: size %lu", ohcip->ohci_hcca_cookie.dmac_size); /* Initialize the interrupt lists */ ohci_build_interrupt_lattice(ohcip); USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_init_hcca: End"); return (DDI_SUCCESS); } /* * ohci_build_interrupt_lattice: * * Construct the interrupt lattice tree using static Endpoint Descriptors * (ED). This interrupt lattice tree will have total of 32 interrupt ED * lists and the Host Controller (HC) processes one interrupt ED list in * every frame. The lower five bits of the current frame number indexes * into an array of 32 interrupt Endpoint Descriptor lists found in the * HCCA. */ static void ohci_build_interrupt_lattice(ohci_state_t *ohcip) { ohci_ed_t *list_array = ohcip->ohci_ed_pool_addr; int half_list = NUM_INTR_ED_LISTS / 2; ohci_hcca_t *hccap = ohcip->ohci_hccap; uintptr_t addr; int i; USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_build_interrupt_lattice:"); /* * Reserve the first 31 Endpoint Descriptor (ED) structures * in the pool as static endpoints & these are required for * constructing interrupt lattice tree. */ for (i = 0; i < NUM_STATIC_NODES; i++) { Set_ED(list_array[i].hced_ctrl, HC_EPT_sKip); Set_ED(list_array[i].hced_state, HC_EPT_STATIC); } /* Build the interrupt lattice tree */ for (i = 0; i < half_list - 1; i++) { /* * The next pointer in the host controller endpoint * descriptor must contain an iommu address. Calculate * the offset into the cpu address and add this to the * starting iommu address. */ addr = ohci_ed_cpu_to_iommu(ohcip, (ohci_ed_t *)&list_array[i]); Set_ED(list_array[2*i + 1].hced_next, addr); Set_ED(list_array[2*i + 2].hced_next, addr); } /* * Initialize the interrupt list in the HCCA so that it points * to the bottom of the tree. */ for (i = 0; i < half_list; i++) { addr = ohci_ed_cpu_to_iommu(ohcip, (ohci_ed_t *)&list_array[half_list - 1 + ohci_index[i]]); ASSERT(Get_ED(list_array[half_list - 1 + ohci_index[i]].hced_ctrl)); ASSERT(addr != 0); Set_HCCA(hccap->HccaIntTble[i], addr); Set_HCCA(hccap->HccaIntTble[i + half_list], addr); } } /* * ohci_take_control: * * Take control of the host controller. OpenHCI allows for optional support * of legacy devices through the use of System Management Mode software and * system Management interrupt hardware. See section 5.1.1.3 of the OpenHCI * spec for more details. */ static int ohci_take_control(ohci_state_t *ohcip) { #if defined(__x86) uint32_t hcr_control_val; uint32_t hcr_cmd_status_val; int wait; #endif /* __x86 */ USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_take_control:"); #if defined(__x86) /* * On x86, we must tell the BIOS we want the controller, * and wait for it to respond that we can have it. */ hcr_control_val = Get_OpReg(hcr_control); if ((hcr_control_val & HCR_CONTROL_IR) == 0) { USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_take_control: InterruptRouting off\n"); return (DDI_SUCCESS); } /* attempt the OwnershipChange request */ hcr_cmd_status_val = Get_OpReg(hcr_cmd_status); USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_take_control: hcr_cmd_status: 0x%x\n", hcr_cmd_status_val); hcr_cmd_status_val |= HCR_STATUS_OCR; Set_OpReg(hcr_cmd_status, hcr_cmd_status_val); /* now wait for 5 seconds for InterruptRouting to go away */ for (wait = 0; wait < 5000; wait++) { if ((Get_OpReg(hcr_control) & HCR_CONTROL_IR) == 0) break; drv_usecwait(1000); } if (wait >= 5000) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_take_control: couldn't take control from BIOS\n"); return (DDI_FAILURE); } #else /* __x86 */ /* * On Sparc, there won't be special System Management Mode * hardware for legacy devices, while the x86 platforms may * have to deal with this. This function may be platform * specific. * * The interrupt routing bit should not be set. */ if (Get_OpReg(hcr_control) & HCR_CONTROL_IR) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_take_control: Routing bit set"); return (DDI_FAILURE); } #endif /* __x86 */ USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_take_control: End"); return (DDI_SUCCESS); } /* * ohci_pm_support: * always return success since PM has been quite reliable on ohci */ /*ARGSUSED*/ int ohci_hcdi_pm_support(dev_info_t *dip) { return (USB_SUCCESS); } /* * ohci_alloc_hcdi_ops: * * The HCDI interfaces or entry points are the software interfaces used by * the Universal Serial Bus Driver (USBA) to access the services of the * Host Controller Driver (HCD). During HCD initialization, inform USBA * about all available HCDI interfaces or entry points. */ static usba_hcdi_ops_t * ohci_alloc_hcdi_ops(ohci_state_t *ohcip) { usba_hcdi_ops_t *usba_hcdi_ops; USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_alloc_hcdi_ops:"); usba_hcdi_ops = usba_alloc_hcdi_ops(); usba_hcdi_ops->usba_hcdi_ops_version = HCDI_OPS_VERSION; usba_hcdi_ops->usba_hcdi_pm_support = ohci_hcdi_pm_support; usba_hcdi_ops->usba_hcdi_pipe_open = ohci_hcdi_pipe_open; usba_hcdi_ops->usba_hcdi_pipe_close = ohci_hcdi_pipe_close; usba_hcdi_ops->usba_hcdi_pipe_reset = ohci_hcdi_pipe_reset; usba_hcdi_ops->usba_hcdi_pipe_ctrl_xfer = ohci_hcdi_pipe_ctrl_xfer; usba_hcdi_ops->usba_hcdi_pipe_bulk_xfer = ohci_hcdi_pipe_bulk_xfer; usba_hcdi_ops->usba_hcdi_pipe_intr_xfer = ohci_hcdi_pipe_intr_xfer; usba_hcdi_ops->usba_hcdi_pipe_isoc_xfer = ohci_hcdi_pipe_isoc_xfer; usba_hcdi_ops->usba_hcdi_bulk_transfer_size = ohci_hcdi_bulk_transfer_size; usba_hcdi_ops->usba_hcdi_pipe_stop_intr_polling = ohci_hcdi_pipe_stop_intr_polling; usba_hcdi_ops->usba_hcdi_pipe_stop_isoc_polling = ohci_hcdi_pipe_stop_isoc_polling; usba_hcdi_ops->usba_hcdi_get_current_frame_number = ohci_hcdi_get_current_frame_number; usba_hcdi_ops->usba_hcdi_get_max_isoc_pkts = ohci_hcdi_get_max_isoc_pkts; usba_hcdi_ops->usba_hcdi_console_input_init = ohci_hcdi_polled_input_init; usba_hcdi_ops->usba_hcdi_console_input_enter = ohci_hcdi_polled_input_enter; usba_hcdi_ops->usba_hcdi_console_read = ohci_hcdi_polled_read; usba_hcdi_ops->usba_hcdi_console_input_exit = ohci_hcdi_polled_input_exit; usba_hcdi_ops->usba_hcdi_console_input_fini = ohci_hcdi_polled_input_fini; return (usba_hcdi_ops); } /* * Host Controller Driver (HCD) deinitialization functions */ /* * ohci_cleanup: * * Cleanup on attach failure or detach */ static int ohci_cleanup(ohci_state_t *ohcip) { ohci_trans_wrapper_t *tw; ohci_pipe_private_t *pp; ohci_td_t *td; int i, state, rval; int flags = ohcip->ohci_flags; USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_cleanup:"); if (flags & OHCI_RHREG) { /* Unload the root hub driver */ if (ohci_unload_root_hub_driver(ohcip) != USB_SUCCESS) { return (DDI_FAILURE); } } if (flags & OHCI_USBAREG) { /* Unregister this HCD instance with USBA */ usba_hcdi_unregister(ohcip->ohci_dip); } if (flags & OHCI_INTR) { mutex_enter(&ohcip->ohci_int_mutex); /* Disable all HC ED list processing */ Set_OpReg(hcr_control, (Get_OpReg(hcr_control) & ~(HCR_CONTROL_CLE | HCR_CONTROL_BLE | HCR_CONTROL_PLE | HCR_CONTROL_IE))); /* Disable all HC interrupts */ Set_OpReg(hcr_intr_disable, (HCR_INTR_SO | HCR_INTR_WDH | HCR_INTR_RD | HCR_INTR_UE)); /* Wait for the next SOF */ (void) ohci_wait_for_sof(ohcip); /* Disable Master and SOF interrupts */ Set_OpReg(hcr_intr_disable, (HCR_INTR_MIE | HCR_INTR_SOF)); /* Set the Host Controller Functional State to Reset */ Set_OpReg(hcr_control, ((Get_OpReg(hcr_control) & (~HCR_CONTROL_HCFS)) | HCR_CONTROL_RESET)); /* Wait for sometime */ drv_usecwait(OHCI_TIMEWAIT); /* * Workaround for ULI1575 chipset. Following OHCI Operational * Memory Registers are not cleared to their default value * on reset. Explicitly set the registers to default value. */ if (ohcip->ohci_vendor_id == PCI_ULI1575_VENID && ohcip->ohci_device_id == PCI_ULI1575_DEVID) { Set_OpReg(hcr_control, HCR_CONTROL_DEFAULT); Set_OpReg(hcr_intr_enable, HCR_INT_ENABLE_DEFAULT); Set_OpReg(hcr_HCCA, HCR_HCCA_DEFAULT); Set_OpReg(hcr_ctrl_head, HCR_CONTROL_HEAD_ED_DEFAULT); Set_OpReg(hcr_bulk_head, HCR_BULK_HEAD_ED_DEFAULT); Set_OpReg(hcr_frame_interval, HCR_FRAME_INTERVAL_DEFAULT); Set_OpReg(hcr_periodic_strt, HCR_PERIODIC_START_DEFAULT); } mutex_exit(&ohcip->ohci_int_mutex); ohci_rem_intrs(ohcip); } /* Unmap the OHCI registers */ if (ohcip->ohci_regs_handle) { /* Reset the host controller */ Set_OpReg(hcr_cmd_status, HCR_STATUS_RESET); ddi_regs_map_free(&ohcip->ohci_regs_handle); } if (ohcip->ohci_config_handle) { pci_config_teardown(&ohcip->ohci_config_handle); } /* Free all the buffers */ if (ohcip->ohci_td_pool_addr && ohcip->ohci_td_pool_mem_handle) { for (i = 0; i < ohci_td_pool_size; i ++) { td = &ohcip->ohci_td_pool_addr[i]; state = Get_TD(ohcip->ohci_td_pool_addr[i].hctd_state); if ((state != HC_TD_FREE) && (state != HC_TD_DUMMY) && (td->hctd_trans_wrapper)) { mutex_enter(&ohcip->ohci_int_mutex); tw = (ohci_trans_wrapper_t *) OHCI_LOOKUP_ID((uint32_t) Get_TD(td->hctd_trans_wrapper)); /* Obtain the pipe private structure */ pp = tw->tw_pipe_private; /* Stop the the transfer timer */ ohci_stop_xfer_timer(ohcip, tw, OHCI_REMOVE_XFER_ALWAYS); ohci_deallocate_tw_resources(ohcip, pp, tw); mutex_exit(&ohcip->ohci_int_mutex); } } /* * If OHCI_TD_POOL_BOUND flag is set, then unbind * the handle for TD pools. */ if ((ohcip->ohci_dma_addr_bind_flag & OHCI_TD_POOL_BOUND) == OHCI_TD_POOL_BOUND) { rval = ddi_dma_unbind_handle( ohcip->ohci_td_pool_dma_handle); ASSERT(rval == DDI_SUCCESS); } ddi_dma_mem_free(&ohcip->ohci_td_pool_mem_handle); } /* Free the TD pool */ if (ohcip->ohci_td_pool_dma_handle) { ddi_dma_free_handle(&ohcip->ohci_td_pool_dma_handle); } if (ohcip->ohci_ed_pool_addr && ohcip->ohci_ed_pool_mem_handle) { /* * If OHCI_ED_POOL_BOUND flag is set, then unbind * the handle for ED pools. */ if ((ohcip->ohci_dma_addr_bind_flag & OHCI_ED_POOL_BOUND) == OHCI_ED_POOL_BOUND) { rval = ddi_dma_unbind_handle( ohcip->ohci_ed_pool_dma_handle); ASSERT(rval == DDI_SUCCESS); } ddi_dma_mem_free(&ohcip->ohci_ed_pool_mem_handle); } /* Free the ED pool */ if (ohcip->ohci_ed_pool_dma_handle) { ddi_dma_free_handle(&ohcip->ohci_ed_pool_dma_handle); } /* Free the HCCA area */ if (ohcip->ohci_hccap && ohcip->ohci_hcca_mem_handle) { /* * If OHCI_HCCA_DMA_BOUND flag is set, then unbind * the handle for HCCA. */ if ((ohcip->ohci_dma_addr_bind_flag & OHCI_HCCA_DMA_BOUND) == OHCI_HCCA_DMA_BOUND) { rval = ddi_dma_unbind_handle( ohcip->ohci_hcca_dma_handle); ASSERT(rval == DDI_SUCCESS); } ddi_dma_mem_free(&ohcip->ohci_hcca_mem_handle); } if (ohcip->ohci_hcca_dma_handle) { ddi_dma_free_handle(&ohcip->ohci_hcca_dma_handle); } if (flags & OHCI_INTR) { /* Destroy the mutex */ mutex_destroy(&ohcip->ohci_int_mutex); /* Destroy the SOF condition varibale */ cv_destroy(&ohcip->ohci_SOF_cv); /* Destroy the serialize opens and closes semaphore */ sema_destroy(&ohcip->ohci_ocsem); } /* clean up kstat structs */ ohci_destroy_stats(ohcip); /* Free ohci hcdi ops */ if (ohcip->ohci_hcdi_ops) { usba_free_hcdi_ops(ohcip->ohci_hcdi_ops); } if (flags & OHCI_ZALLOC) { usb_free_log_hdl(ohcip->ohci_log_hdl); /* Remove all properties that might have been created */ ddi_prop_remove_all(ohcip->ohci_dip); /* Free the soft state */ ddi_soft_state_free(ohci_statep, ddi_get_instance(ohcip->ohci_dip)); } return (DDI_SUCCESS); } /* * ohci_rem_intrs: * * Unregister FIXED or MSI interrupts */ static void ohci_rem_intrs(ohci_state_t *ohcip) { int i; USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_rem_intrs: interrupt type 0x%x", ohcip->ohci_intr_type); /* Disable all interrupts */ if (ohcip->ohci_intr_cap & DDI_INTR_FLAG_BLOCK) { (void) ddi_intr_block_disable(ohcip->ohci_htable, ohcip->ohci_intr_cnt); } else { for (i = 0; i < ohcip->ohci_intr_cnt; i++) { (void) ddi_intr_disable(ohcip->ohci_htable[i]); } } /* Call ddi_intr_remove_handler() */ for (i = 0; i < ohcip->ohci_intr_cnt; i++) { (void) ddi_intr_remove_handler(ohcip->ohci_htable[i]); (void) ddi_intr_free(ohcip->ohci_htable[i]); } kmem_free(ohcip->ohci_htable, ohcip->ohci_intr_cnt * sizeof (ddi_intr_handle_t)); } /* * ohci_cpr_suspend */ static int ohci_cpr_suspend(ohci_state_t *ohcip) { USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_cpr_suspend:"); /* Call into the root hub and suspend it */ if (usba_hubdi_detach(ohcip->ohci_dip, DDI_SUSPEND) != DDI_SUCCESS) { return (DDI_FAILURE); } /* Only root hub's intr pipe should be open at this time */ mutex_enter(&ohcip->ohci_int_mutex); if (ohcip->ohci_open_pipe_count > 1) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_cpr_suspend: fails as open pipe count = %d", ohcip->ohci_open_pipe_count); mutex_exit(&ohcip->ohci_int_mutex); return (DDI_FAILURE); } USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_cpr_suspend: Disable HC ED list processing"); /* Disable all HC ED list processing */ Set_OpReg(hcr_control, (Get_OpReg(hcr_control) & ~(HCR_CONTROL_CLE | HCR_CONTROL_BLE | HCR_CONTROL_PLE | HCR_CONTROL_IE))); USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_cpr_suspend: Disable HC interrupts"); /* Disable all HC interrupts */ Set_OpReg(hcr_intr_disable, ~(HCR_INTR_MIE|HCR_INTR_SOF)); USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_cpr_suspend: Wait for the next SOF"); /* Wait for the next SOF */ if (ohci_wait_for_sof(ohcip) != USB_SUCCESS) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_cpr_suspend: ohci host controller suspend failed"); mutex_exit(&ohcip->ohci_int_mutex); return (DDI_FAILURE); } USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_cpr_suspend: Disable Master interrupt"); /* * Disable Master interrupt so that ohci driver don't * get any ohci interrupts. */ Set_OpReg(hcr_intr_disable, HCR_INTR_MIE); /* * Suspend the ohci host controller * if usb keyboard is not connected. */ if (ohcip->ohci_polled_kbd_count == 0) { Set_OpReg(hcr_control, HCR_CONTROL_SUSPD); } /* Set host controller soft state to suspend */ ohcip->ohci_hc_soft_state = OHCI_CTLR_SUSPEND_STATE; mutex_exit(&ohcip->ohci_int_mutex); return (DDI_SUCCESS); } /* * ohci_cpr_resume */ static int ohci_cpr_resume(ohci_state_t *ohcip) { mutex_enter(&ohcip->ohci_int_mutex); USB_DPRINTF_L4(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_cpr_resume: Restart the controller"); /* Cleanup ohci specific information across cpr */ ohci_cpr_cleanup(ohcip); /* Restart the controller */ if (ohci_init_ctlr(ohcip) != DDI_SUCCESS) { USB_DPRINTF_L2(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "ohci_cpr_resume: ohci host controller resume failed "); mutex_exit(&ohcip->ohci_int_mutex); return (DDI_FAILURE); } mutex_exit(&ohcip->ohci_int_mutex); /* Now resume the root hub */ if (usba_hubdi_attach(ohcip->ohci_dip, DDI_RESUME) != DDI_SUCCESS) { return (DDI_FAILURE); } return (DDI_SUCCESS); } /* * HCDI entry points * * The Host Controller Driver Interfaces (HCDI) are the software interfaces * between the Universal Serial Bus Layer (USBA) and the Host Controller * Driver (HCD). The HCDI interfaces or entry points are subject to change. */ /* * ohci_hcdi_pipe_open: * * Member of HCD Ops structure and called during client specific pipe open * Add the pipe to the data structure representing the device and allocate * bandwidth for the pipe if it is a interrupt or isochronous endpoint. */ static int ohci_hcdi_pipe_open( usba_pipe_handle_data_t *ph, usb_flags_t flags) { ohci_state_t *ohcip = ohci_obtain_state( ph->p_usba_device->usb_root_hub_dip); usb_ep_descr_t *epdt = &ph->p_ep; int rval, error = USB_SUCCESS; int kmflag = (flags & USB_FLAGS_SLEEP) ? KM_SLEEP : KM_NOSLEEP; uint_t node = 0; ohci_pipe_private_t *pp; USB_DPRINTF_L4(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_pipe_open: addr = 0x%x, ep%d", ph->p_usba_device->usb_addr, epdt->bEndpointAddress & USB_EP_NUM_MASK); sema_p(&ohcip->ohci_ocsem); mutex_enter(&ohcip->ohci_int_mutex); rval = ohci_state_is_operational(ohcip); mutex_exit(&ohcip->ohci_int_mutex); if (rval != USB_SUCCESS) { sema_v(&ohcip->ohci_ocsem); return (rval); } /* * Check and handle root hub pipe open. */ if (ph->p_usba_device->usb_addr == ROOT_HUB_ADDR) { mutex_enter(&ohcip->ohci_int_mutex); error = ohci_handle_root_hub_pipe_open(ph, flags); mutex_exit(&ohcip->ohci_int_mutex); sema_v(&ohcip->ohci_ocsem); return (error); } /* * Opening of other pipes excluding root hub pipe are * handled below. Check whether pipe is already opened. */ if (ph->p_hcd_private) { USB_DPRINTF_L2(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_pipe_open: Pipe is already opened"); sema_v(&ohcip->ohci_ocsem); return (USB_FAILURE); } /* * A portion of the bandwidth is reserved for the non-periodic * transfers, i.e control and bulk transfers in each of one * millisecond frame period & usually it will be 10% of frame * period. Hence there is no need to check for the available * bandwidth before adding the control or bulk endpoints. * * There is a need to check for the available bandwidth before * adding the periodic transfers, i.e interrupt & isochronous, * since all these periodic transfers are guaranteed transfers. * Usually 90% of the total frame time is reserved for periodic * transfers. */ if (OHCI_PERIODIC_ENDPOINT(epdt)) { mutex_enter(&ohcip->ohci_int_mutex); mutex_enter(&ph->p_mutex); error = ohci_allocate_bandwidth(ohcip, ph, &node); if (error != USB_SUCCESS) { USB_DPRINTF_L2(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_pipe_open: Bandwidth allocation failed"); mutex_exit(&ph->p_mutex); mutex_exit(&ohcip->ohci_int_mutex); sema_v(&ohcip->ohci_ocsem); return (error); } mutex_exit(&ph->p_mutex); mutex_exit(&ohcip->ohci_int_mutex); } /* Create the HCD pipe private structure */ pp = kmem_zalloc(sizeof (ohci_pipe_private_t), kmflag); /* * Return failure if ohci pipe private * structure allocation fails. */ if (pp == NULL) { mutex_enter(&ohcip->ohci_int_mutex); /* Deallocate bandwidth */ if (OHCI_PERIODIC_ENDPOINT(epdt)) { mutex_enter(&ph->p_mutex); ohci_deallocate_bandwidth(ohcip, ph); mutex_exit(&ph->p_mutex); } mutex_exit(&ohcip->ohci_int_mutex); sema_v(&ohcip->ohci_ocsem); return (USB_NO_RESOURCES); } mutex_enter(&ohcip->ohci_int_mutex); /* Store the node in the interrupt lattice */ pp->pp_node = node; /* Create prototype for xfer completion condition variable */ cv_init(&pp->pp_xfer_cmpl_cv, NULL, CV_DRIVER, NULL); /* Set the state of pipe as idle */ pp->pp_state = OHCI_PIPE_STATE_IDLE; /* Store a pointer to the pipe handle */ pp->pp_pipe_handle = ph; mutex_enter(&ph->p_mutex); /* Store the pointer in the pipe handle */ ph->p_hcd_private = (usb_opaque_t)pp; /* Store a copy of the pipe policy */ bcopy(&ph->p_policy, &pp->pp_policy, sizeof (usb_pipe_policy_t)); mutex_exit(&ph->p_mutex); /* Allocate the host controller endpoint descriptor */ pp->pp_ept = ohci_alloc_hc_ed(ohcip, ph); if (pp->pp_ept == NULL) { USB_DPRINTF_L2(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_pipe_open: ED allocation failed"); mutex_enter(&ph->p_mutex); /* Deallocate bandwidth */ if (OHCI_PERIODIC_ENDPOINT(epdt)) { ohci_deallocate_bandwidth(ohcip, ph); } /* Destroy the xfer completion condition varibale */ cv_destroy(&pp->pp_xfer_cmpl_cv); /* * Deallocate the hcd private portion * of the pipe handle. */ kmem_free(ph->p_hcd_private, sizeof (ohci_pipe_private_t)); /* * Set the private structure in the * pipe handle equal to NULL. */ ph->p_hcd_private = NULL; mutex_exit(&ph->p_mutex); mutex_exit(&ohcip->ohci_int_mutex); sema_v(&ohcip->ohci_ocsem); return (USB_NO_RESOURCES); } /* Restore the data toggle information */ ohci_restore_data_toggle(ohcip, ph); /* * Insert the endpoint onto the host controller's * appropriate endpoint list. The host controller * will not schedule this endpoint and will not have * any TD's to process. */ ohci_insert_ed(ohcip, ph); USB_DPRINTF_L4(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_pipe_open: ph = 0x%p", (void *)ph); ohcip->ohci_open_pipe_count++; mutex_exit(&ohcip->ohci_int_mutex); sema_v(&ohcip->ohci_ocsem); return (USB_SUCCESS); } /* * ohci_hcdi_pipe_close: * * Member of HCD Ops structure and called during the client specific pipe * close. Remove the pipe and the data structure representing the device. * Deallocate bandwidth for the pipe if it is a interrupt or isochronous * endpoint. */ /* ARGSUSED */ static int ohci_hcdi_pipe_close( usba_pipe_handle_data_t *ph, usb_flags_t flags) { ohci_state_t *ohcip = ohci_obtain_state( ph->p_usba_device->usb_root_hub_dip); ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; usb_ep_descr_t *eptd = &ph->p_ep; int error = USB_SUCCESS; USB_DPRINTF_L4(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_pipe_close: addr = 0x%x, ep%d", ph->p_usba_device->usb_addr, eptd->bEndpointAddress & USB_EP_NUM_MASK); sema_p(&ohcip->ohci_ocsem); /* Check and handle root hub pipe close */ if (ph->p_usba_device->usb_addr == ROOT_HUB_ADDR) { mutex_enter(&ohcip->ohci_int_mutex); error = ohci_handle_root_hub_pipe_close(ph); mutex_exit(&ohcip->ohci_int_mutex); sema_v(&ohcip->ohci_ocsem); return (error); } ASSERT(ph->p_hcd_private != NULL); mutex_enter(&ohcip->ohci_int_mutex); /* Set pipe state to pipe close */ pp->pp_state = OHCI_PIPE_STATE_CLOSE; ohci_pipe_cleanup(ohcip, ph); /* * Remove the endoint descriptor from Host * Controller's appropriate endpoint list. */ ohci_remove_ed(ohcip, pp); /* Deallocate bandwidth */ if (OHCI_PERIODIC_ENDPOINT(eptd)) { mutex_enter(&ph->p_mutex); ohci_deallocate_bandwidth(ohcip, ph); mutex_exit(&ph->p_mutex); } mutex_enter(&ph->p_mutex); /* Destroy the xfer completion condition varibale */ cv_destroy(&pp->pp_xfer_cmpl_cv); /* * Deallocate the hcd private portion * of the pipe handle. */ kmem_free(ph->p_hcd_private, sizeof (ohci_pipe_private_t)); ph->p_hcd_private = NULL; mutex_exit(&ph->p_mutex); USB_DPRINTF_L4(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_pipe_close: ph = 0x%p", (void *)ph); ohcip->ohci_open_pipe_count--; mutex_exit(&ohcip->ohci_int_mutex); sema_v(&ohcip->ohci_ocsem); return (error); } /* * ohci_hcdi_pipe_reset: */ /* ARGSUSED */ static int ohci_hcdi_pipe_reset( usba_pipe_handle_data_t *ph, usb_flags_t usb_flags) { ohci_state_t *ohcip = ohci_obtain_state( ph->p_usba_device->usb_root_hub_dip); ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; int error = USB_SUCCESS; USB_DPRINTF_L4(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_pipe_reset: ph = 0x%p ", (void *)ph); /* * Check and handle root hub pipe reset. */ if (ph->p_usba_device->usb_addr == ROOT_HUB_ADDR) { error = ohci_handle_root_hub_pipe_reset(ph, usb_flags); return (error); } mutex_enter(&ohcip->ohci_int_mutex); /* Set pipe state to pipe reset */ pp->pp_state = OHCI_PIPE_STATE_RESET; ohci_pipe_cleanup(ohcip, ph); mutex_exit(&ohcip->ohci_int_mutex); return (error); } /* * ohci_hcdi_pipe_ctrl_xfer: */ static int ohci_hcdi_pipe_ctrl_xfer( usba_pipe_handle_data_t *ph, usb_ctrl_req_t *ctrl_reqp, usb_flags_t usb_flags) { ohci_state_t *ohcip = ohci_obtain_state( ph->p_usba_device->usb_root_hub_dip); ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; int rval; int error = USB_SUCCESS; ohci_trans_wrapper_t *tw; USB_DPRINTF_L4(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_pipe_ctrl_xfer: ph = 0x%p reqp = 0x%p flags = 0x%x", (void *)ph, ctrl_reqp, usb_flags); mutex_enter(&ohcip->ohci_int_mutex); rval = ohci_state_is_operational(ohcip); mutex_exit(&ohcip->ohci_int_mutex); if (rval != USB_SUCCESS) { return (rval); } /* * Check and handle root hub control request. */ if (ph->p_usba_device->usb_addr == ROOT_HUB_ADDR) { error = ohci_handle_root_hub_request(ohcip, ph, ctrl_reqp); return (error); } mutex_enter(&ohcip->ohci_int_mutex); /* * Check whether pipe is in halted state. */ if (pp->pp_state == OHCI_PIPE_STATE_ERROR) { USB_DPRINTF_L2(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_pipe_ctrl_xfer:" "Pipe is in error state, need pipe reset to continue"); mutex_exit(&ohcip->ohci_int_mutex); return (USB_FAILURE); } /* Allocate a transfer wrapper */ if ((tw = ohci_allocate_ctrl_resources(ohcip, pp, ctrl_reqp, usb_flags)) == NULL) { error = USB_NO_RESOURCES; } else { /* Insert the td's on the endpoint */ ohci_insert_ctrl_req(ohcip, ph, ctrl_reqp, tw, usb_flags); } mutex_exit(&ohcip->ohci_int_mutex); return (error); } /* * ohci_hcdi_bulk_transfer_size: * * Return maximum bulk transfer size */ /* ARGSUSED */ static int ohci_hcdi_bulk_transfer_size( usba_device_t *usba_device, size_t *size) { ohci_state_t *ohcip = ohci_obtain_state( usba_device->usb_root_hub_dip); int rval; USB_DPRINTF_L4(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_bulk_transfer_size:"); mutex_enter(&ohcip->ohci_int_mutex); rval = ohci_state_is_operational(ohcip); mutex_exit(&ohcip->ohci_int_mutex); if (rval != USB_SUCCESS) { return (rval); } *size = OHCI_MAX_BULK_XFER_SIZE; return (USB_SUCCESS); } /* * ohci_hcdi_pipe_bulk_xfer: */ static int ohci_hcdi_pipe_bulk_xfer( usba_pipe_handle_data_t *ph, usb_bulk_req_t *bulk_reqp, usb_flags_t usb_flags) { ohci_state_t *ohcip = ohci_obtain_state( ph->p_usba_device->usb_root_hub_dip); ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; int rval, error = USB_SUCCESS; ohci_trans_wrapper_t *tw; USB_DPRINTF_L4(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_pipe_bulk_xfer: ph = 0x%p reqp = 0x%p flags = 0x%x", (void *)ph, bulk_reqp, usb_flags); mutex_enter(&ohcip->ohci_int_mutex); rval = ohci_state_is_operational(ohcip); if (rval != USB_SUCCESS) { mutex_exit(&ohcip->ohci_int_mutex); return (rval); } /* * Check whether pipe is in halted state. */ if (pp->pp_state == OHCI_PIPE_STATE_ERROR) { USB_DPRINTF_L2(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_pipe_bulk_xfer:" "Pipe is in error state, need pipe reset to continue"); mutex_exit(&ohcip->ohci_int_mutex); return (USB_FAILURE); } /* Allocate a transfer wrapper */ if ((tw = ohci_allocate_bulk_resources(ohcip, pp, bulk_reqp, usb_flags)) == NULL) { error = USB_NO_RESOURCES; } else { /* Add the TD into the Host Controller's bulk list */ ohci_insert_bulk_req(ohcip, ph, bulk_reqp, tw, usb_flags); } mutex_exit(&ohcip->ohci_int_mutex); return (error); } /* * ohci_hcdi_pipe_intr_xfer: */ static int ohci_hcdi_pipe_intr_xfer( usba_pipe_handle_data_t *ph, usb_intr_req_t *intr_reqp, usb_flags_t usb_flags) { ohci_state_t *ohcip = ohci_obtain_state( ph->p_usba_device->usb_root_hub_dip); int pipe_dir, rval, error = USB_SUCCESS; ohci_trans_wrapper_t *tw; USB_DPRINTF_L4(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_pipe_intr_xfer: ph = 0x%p reqp = 0x%p flags = 0x%x", (void *)ph, intr_reqp, usb_flags); mutex_enter(&ohcip->ohci_int_mutex); rval = ohci_state_is_operational(ohcip); if (rval != USB_SUCCESS) { mutex_exit(&ohcip->ohci_int_mutex); return (rval); } /* Get the pipe direction */ pipe_dir = ph->p_ep.bEndpointAddress & USB_EP_DIR_MASK; if (pipe_dir == USB_EP_DIR_IN) { error = ohci_start_periodic_pipe_polling(ohcip, ph, (usb_opaque_t)intr_reqp, usb_flags); } else { /* Allocate transaction resources */ if ((tw = ohci_allocate_intr_resources(ohcip, ph, intr_reqp, usb_flags)) == NULL) { error = USB_NO_RESOURCES; } else { ohci_insert_intr_req(ohcip, (ohci_pipe_private_t *)ph->p_hcd_private, tw, usb_flags); } } mutex_exit(&ohcip->ohci_int_mutex); return (error); } /* * ohci_hcdi_pipe_stop_intr_polling() */ static int ohci_hcdi_pipe_stop_intr_polling( usba_pipe_handle_data_t *ph, usb_flags_t flags) { ohci_state_t *ohcip = ohci_obtain_state( ph->p_usba_device->usb_root_hub_dip); int error = USB_SUCCESS; USB_DPRINTF_L4(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_pipe_stop_intr_polling: ph = 0x%p fl = 0x%x", ph, flags); mutex_enter(&ohcip->ohci_int_mutex); error = ohci_stop_periodic_pipe_polling(ohcip, ph, flags); mutex_exit(&ohcip->ohci_int_mutex); return (error); } /* * ohci_hcdi_get_current_frame_number: * * Return the current usb frame number */ static usb_frame_number_t ohci_hcdi_get_current_frame_number(usba_device_t *usba_device) { ohci_state_t *ohcip = ohci_obtain_state( usba_device->usb_root_hub_dip); usb_frame_number_t frame_number; int rval; ohcip = ohci_obtain_state(usba_device->usb_root_hub_dip); mutex_enter(&ohcip->ohci_int_mutex); rval = ohci_state_is_operational(ohcip); if (rval != USB_SUCCESS) { mutex_exit(&ohcip->ohci_int_mutex); return (rval); } frame_number = ohci_get_current_frame_number(ohcip); mutex_exit(&ohcip->ohci_int_mutex); USB_DPRINTF_L4(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_get_current_frame_number:" "Current frame number 0x%llx", frame_number); return (frame_number); } /* * ohci_hcdi_get_max_isoc_pkts: * * Return maximum isochronous packets per usb isochronous request */ static uint_t ohci_hcdi_get_max_isoc_pkts(usba_device_t *usba_device) { ohci_state_t *ohcip = ohci_obtain_state( usba_device->usb_root_hub_dip); uint_t max_isoc_pkts_per_request; int rval; mutex_enter(&ohcip->ohci_int_mutex); rval = ohci_state_is_operational(ohcip); mutex_exit(&ohcip->ohci_int_mutex); if (rval != USB_SUCCESS) { return (rval); } max_isoc_pkts_per_request = OHCI_MAX_ISOC_PKTS_PER_XFER; USB_DPRINTF_L4(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_get_max_isoc_pkts: maximum isochronous" "packets per usb isochronous request = 0x%x", max_isoc_pkts_per_request); return (max_isoc_pkts_per_request); } /* * ohci_hcdi_pipe_isoc_xfer: */ static int ohci_hcdi_pipe_isoc_xfer( usba_pipe_handle_data_t *ph, usb_isoc_req_t *isoc_reqp, usb_flags_t usb_flags) { ohci_state_t *ohcip = ohci_obtain_state( ph->p_usba_device->usb_root_hub_dip); int error = USB_SUCCESS; int pipe_dir, rval; ohci_trans_wrapper_t *tw; USB_DPRINTF_L4(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_pipe_isoc_xfer: ph = 0x%p reqp = 0x%p flags = 0x%x", (void *)ph, isoc_reqp, usb_flags); mutex_enter(&ohcip->ohci_int_mutex); rval = ohci_state_is_operational(ohcip); if (rval != USB_SUCCESS) { mutex_exit(&ohcip->ohci_int_mutex); return (rval); } /* Get the isochronous pipe direction */ pipe_dir = ph->p_ep.bEndpointAddress & USB_EP_DIR_MASK; USB_DPRINTF_L4(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_pipe_isoc_xfer: isoc_reqp = 0x%p, uf = 0x%x", isoc_reqp, usb_flags); if (pipe_dir == USB_EP_DIR_IN) { error = ohci_start_periodic_pipe_polling(ohcip, ph, (usb_opaque_t)isoc_reqp, usb_flags); } else { /* Allocate transaction resources */ if ((tw = ohci_allocate_isoc_resources(ohcip, ph, isoc_reqp, usb_flags)) == NULL) { error = USB_NO_RESOURCES; } else { error = ohci_insert_isoc_req(ohcip, (ohci_pipe_private_t *)ph->p_hcd_private, tw, usb_flags); } } mutex_exit(&ohcip->ohci_int_mutex); return (error); } /* * ohci_hcdi_pipe_stop_isoc_polling() */ static int ohci_hcdi_pipe_stop_isoc_polling( usba_pipe_handle_data_t *ph, usb_flags_t flags) { ohci_state_t *ohcip = ohci_obtain_state( ph->p_usba_device->usb_root_hub_dip); int rval, error = USB_SUCCESS; USB_DPRINTF_L4(PRINT_MASK_HCDI, ohcip->ohci_log_hdl, "ohci_hcdi_pipe_stop_isoc_polling: ph = 0x%p fl = 0x%x", (void *)ph, flags); mutex_enter(&ohcip->ohci_int_mutex); rval = ohci_state_is_operational(ohcip); if (rval != USB_SUCCESS) { mutex_exit(&ohcip->ohci_int_mutex); return (rval); } error = ohci_stop_periodic_pipe_polling(ohcip, ph, flags); mutex_exit(&ohcip->ohci_int_mutex); return (error); } /* * Bandwidth Allocation functions */ /* * ohci_allocate_bandwidth: * * Figure out whether or not this interval may be supported. Return the index * into the lattice if it can be supported. Return allocation failure if it * can not be supported. * * The lattice structure looks like this with the bottom leaf actually * being an array. There is a total of 63 nodes in this tree. The lattice tree * itself is 0 based, while the bottom leaf array is 0 based. The 0 bucket in * the bottom leaf array is used to store the smalled allocated bandwidth of all * the leaves. * * 0 * 1 2 * 3 4 5 6 * ... * (32 33 ... 62 63) <-- last row does not exist in lattice, but an array * 0 1 2 3 ... 30 31 * * We keep track of the bandwidth that each leaf uses. First we search for the * first leaf with the smallest used bandwidth. Based on that leaf we find the * parent node of that leaf based on the interval time. * * From the parent node, we find all the leafs of that subtree and update the * additional bandwidth needed. In order to balance the load the leaves are not * executed directly from left to right, but scattered. For a better picture * refer to Section 3.3.2 in the OpenHCI 1.0 spec, there should be a figure * showing the Interrupt ED Structure. */ static int ohci_allocate_bandwidth( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph, uint_t *node) { int interval, error, i; uint_t min, min_index, height; uint_t leftmost, list, bandwidth; usb_ep_descr_t *endpoint = &ph->p_ep; /* This routine is protected by the ohci_int_mutex */ ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Calculate the length in bytes of a transaction on this * periodic endpoint. */ mutex_enter(&ph->p_usba_device->usb_mutex); error = ohci_compute_total_bandwidth( endpoint, ph->p_usba_device->usb_port_status, &bandwidth); mutex_exit(&ph->p_usba_device->usb_mutex); /* * If length is zero, then, it means endpoint maximum packet * supported is zero. In that case, return failure without * allocating any bandwidth. */ if (error != USB_SUCCESS) { USB_DPRINTF_L2(PRINT_MASK_BW, ohcip->ohci_log_hdl, "ohci_allocate_bandwidth: Periodic endpoint with " "zero endpoint maximum packet size is not supported"); return (USB_NOT_SUPPORTED); } /* * If the length in bytes plus the allocated bandwidth exceeds * the maximum, return bandwidth allocation failure. */ if ((ohcip->ohci_periodic_minimum_bandwidth + bandwidth) > (MAX_PERIODIC_BANDWIDTH)) { USB_DPRINTF_L2(PRINT_MASK_BW, ohcip->ohci_log_hdl, "ohci_allocate_bandwidth: Reached maximum " "bandwidth value and cannot allocate bandwidth " "for a given periodic endpoint"); return (USB_NO_BANDWIDTH); } /* Adjust polling interval to be a power of 2 */ mutex_enter(&ph->p_usba_device->usb_mutex); interval = ohci_adjust_polling_interval(ohcip, endpoint, ph->p_usba_device->usb_port_status); mutex_exit(&ph->p_usba_device->usb_mutex); /* * If this interval can't be supported, * return allocation failure. */ if (interval == USB_FAILURE) { return (USB_FAILURE); } USB_DPRINTF_L4(PRINT_MASK_BW, ohcip->ohci_log_hdl, "The new interval is %d", interval); /* Find the leaf with the smallest allocated bandwidth */ min_index = 0; min = ohcip->ohci_periodic_bandwidth[0]; for (i = 1; i < NUM_INTR_ED_LISTS; i++) { if (ohcip->ohci_periodic_bandwidth[i] < min) { min_index = i; min = ohcip->ohci_periodic_bandwidth[i]; } } USB_DPRINTF_L4(PRINT_MASK_BW, ohcip->ohci_log_hdl, "The leaf %d for minimal bandwidth %d", min_index, min); /* Adjust min for the lattice */ min_index = min_index + NUM_INTR_ED_LISTS - 1; /* * Find the index into the lattice given the * leaf with the smallest allocated bandwidth. */ height = ohci_lattice_height(interval); USB_DPRINTF_L4(PRINT_MASK_BW, ohcip->ohci_log_hdl, "The height is %d", height); *node = min_index; for (i = 0; i < height; i++) { *node = ohci_lattice_parent(*node); } USB_DPRINTF_L4(PRINT_MASK_BW, ohcip->ohci_log_hdl, "Real node is %d", *node); /* * Find the leftmost leaf in the subtree * specified by the node. */ leftmost = ohci_leftmost_leaf(*node, height); USB_DPRINTF_L4(PRINT_MASK_BW, ohcip->ohci_log_hdl, "Leftmost %d", leftmost); for (i = 0; i < (NUM_INTR_ED_LISTS/interval); i++) { list = ohci_hcca_leaf_index(leftmost + i); if ((ohcip->ohci_periodic_bandwidth[list] + bandwidth) > MAX_PERIODIC_BANDWIDTH) { USB_DPRINTF_L2(PRINT_MASK_BW, ohcip->ohci_log_hdl, "ohci_allocate_bandwidth: Reached maximum " "bandwidth value and cannot allocate bandwidth " "for periodic endpoint"); return (USB_NO_BANDWIDTH); } } /* * All the leaves for this node must be updated with the bandwidth. */ for (i = 0; i < (NUM_INTR_ED_LISTS/interval); i++) { list = ohci_hcca_leaf_index(leftmost + i); ohcip->ohci_periodic_bandwidth[list] += bandwidth; } /* Find the leaf with the smallest allocated bandwidth */ min_index = 0; min = ohcip->ohci_periodic_bandwidth[0]; for (i = 1; i < NUM_INTR_ED_LISTS; i++) { if (ohcip->ohci_periodic_bandwidth[i] < min) { min_index = i; min = ohcip->ohci_periodic_bandwidth[i]; } } /* Save the minimum for later use */ ohcip->ohci_periodic_minimum_bandwidth = min; return (USB_SUCCESS); } /* * ohci_deallocate_bandwidth: * * Deallocate bandwidth for the given node in the lattice and the length * of transfer. */ static void ohci_deallocate_bandwidth( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph) { uint_t min, node, bandwidth; uint_t height, leftmost, list; int i, interval; usb_ep_descr_t *endpoint = &ph->p_ep; ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; /* This routine is protected by the ohci_int_mutex */ ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* Obtain the length */ mutex_enter(&ph->p_usba_device->usb_mutex); (void) ohci_compute_total_bandwidth( endpoint, ph->p_usba_device->usb_port_status, &bandwidth); mutex_exit(&ph->p_usba_device->usb_mutex); /* Obtain the node */ node = pp->pp_node; /* Adjust polling interval to be a power of 2 */ mutex_enter(&ph->p_usba_device->usb_mutex); interval = ohci_adjust_polling_interval(ohcip, endpoint, ph->p_usba_device->usb_port_status); mutex_exit(&ph->p_usba_device->usb_mutex); /* Find the height in the tree */ height = ohci_lattice_height(interval); /* * Find the leftmost leaf in the subtree specified by the node */ leftmost = ohci_leftmost_leaf(node, height); /* Delete the bandwith from the appropriate lists */ for (i = 0; i < (NUM_INTR_ED_LISTS/interval); i++) { list = ohci_hcca_leaf_index(leftmost + i); ohcip->ohci_periodic_bandwidth[list] -= bandwidth; } min = ohcip->ohci_periodic_bandwidth[0]; /* Recompute the minimum */ for (i = 1; i < NUM_INTR_ED_LISTS; i++) { if (ohcip->ohci_periodic_bandwidth[i] < min) { min = ohcip->ohci_periodic_bandwidth[i]; } } /* Save the minimum for later use */ ohcip->ohci_periodic_minimum_bandwidth = min; } /* * ohci_compute_total_bandwidth: * * Given a periodic endpoint (interrupt or isochronous) determine the total * bandwidth for one transaction. The OpenHCI host controller traverses the * endpoint descriptor lists on a first-come-first-serve basis. When the HC * services an endpoint, only a single transaction attempt is made. The HC * moves to the next Endpoint Descriptor after the first transaction attempt * rather than finishing the entire Transfer Descriptor. Therefore, when a * Transfer Descriptor is inserted into the lattice, we will only count the * number of bytes for one transaction. * * The following are the formulas used for calculating bandwidth in terms * bytes and it is for the single USB full speed and low speed transaction * respectively. The protocol overheads will be different for each of type * of USB transfer and all these formulas & protocol overheads are derived * from the 5.9.3 section of USB Specification & with the help of Bandwidth * Analysis white paper which is posted on the USB developer forum. * * Full-Speed: * Protocol overhead + ((MaxPacketSize * 7)/6 ) + Host_Delay * * Low-Speed: * Protocol overhead + Hub LS overhead + * (Low-Speed clock * ((MaxPacketSize * 7)/6 )) + Host_Delay */ static int ohci_compute_total_bandwidth( usb_ep_descr_t *endpoint, usb_port_status_t port_status, uint_t *bandwidth) { ushort_t maxpacketsize = endpoint->wMaxPacketSize; /* * If endpoint maximum packet is zero, then return immediately. */ if (maxpacketsize == 0) { return (USB_NOT_SUPPORTED); } /* Add Host Controller specific delay to required bandwidth */ *bandwidth = HOST_CONTROLLER_DELAY; /* Add bit-stuffing overhead */ maxpacketsize = (ushort_t)((maxpacketsize * 7) / 6); /* Low Speed interrupt transaction */ if (port_status == USBA_LOW_SPEED_DEV) { /* Low Speed interrupt transaction */ *bandwidth += (LOW_SPEED_PROTO_OVERHEAD + HUB_LOW_SPEED_PROTO_OVERHEAD + (LOW_SPEED_CLOCK * maxpacketsize)); } else { /* Full Speed transaction */ *bandwidth += maxpacketsize; if ((endpoint->bmAttributes & USB_EP_ATTR_MASK) == USB_EP_ATTR_INTR) { /* Full Speed interrupt transaction */ *bandwidth += FS_NON_ISOC_PROTO_OVERHEAD; } else { /* Isochronous and input transaction */ if ((endpoint->bEndpointAddress & USB_EP_DIR_MASK) == USB_EP_DIR_IN) { *bandwidth += FS_ISOC_INPUT_PROTO_OVERHEAD; } else { /* Isochronous and output transaction */ *bandwidth += FS_ISOC_OUTPUT_PROTO_OVERHEAD; } } } return (USB_SUCCESS); } /* * ohci_adjust_polling_interval: */ static int ohci_adjust_polling_interval( ohci_state_t *ohcip, usb_ep_descr_t *endpoint, usb_port_status_t port_status) { uint_t interval; int i = 0; /* * Get the polling interval from the endpoint descriptor */ interval = endpoint->bInterval; /* * The bInterval value in the endpoint descriptor can range * from 1 to 255ms. The interrupt lattice has 32 leaf nodes, * and the host controller cycles through these nodes every * 32ms. The longest polling interval that the controller * supports is 32ms. */ /* * Return an error if the polling interval is less than 1ms * and greater than 255ms */ if ((interval < MIN_POLL_INTERVAL) || (interval > MAX_POLL_INTERVAL)) { USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_adjust_polling_interval: " "Endpoint's poll interval must be between %d and %d ms", MIN_POLL_INTERVAL, MAX_POLL_INTERVAL); return (USB_FAILURE); } /* * According USB Specifications, a full-speed endpoint can * specify a desired polling interval 1ms to 255ms and a low * speed endpoints are limited to specifying only 10ms to * 255ms. But some old keyboards & mice uses polling interval * of 8ms. For compatibility purpose, we are using polling * interval between 8ms & 255ms for low speed endpoints. But * ohci driver will reject the any low speed endpoints which * request polling interval less than 8ms. */ if ((port_status == USBA_LOW_SPEED_DEV) && (interval < MIN_LOW_SPEED_POLL_INTERVAL)) { USB_DPRINTF_L2(PRINT_MASK_BW, ohcip->ohci_log_hdl, "ohci_adjust_polling_interval: " "Low speed endpoint's poll interval of %d ms " "is below threshold. Rounding up to %d ms", interval, MIN_LOW_SPEED_POLL_INTERVAL); interval = MIN_LOW_SPEED_POLL_INTERVAL; } /* * If polling interval is greater than 32ms, * adjust polling interval equal to 32ms. */ if (interval > NUM_INTR_ED_LISTS) { interval = NUM_INTR_ED_LISTS; } /* * Find the nearest power of 2 that'sless * than interval. */ while ((ohci_pow_2(i)) <= interval) { i++; } return (ohci_pow_2((i - 1))); } /* * ohci_lattice_height: * * Given the requested bandwidth, find the height in the tree at which the * nodes for this bandwidth fall. The height is measured as the number of * nodes from the leaf to the level specified by bandwidth The root of the * tree is at height TREE_HEIGHT. */ static uint_t ohci_lattice_height(uint_t interval) { return (TREE_HEIGHT - (ohci_log_2(interval))); } /* * ohci_lattice_parent: */ static uint_t ohci_lattice_parent(uint_t node) { if ((node % 2) == 0) { return ((node/2) - 1); } else { return ((node + 1)/2 - 1); } } /* * ohci_leftmost_leaf: * * Find the leftmost leaf in the subtree specified by the node. Height refers * to number of nodes from the bottom of the tree to the node, including the * node. * * The formula for a zero based tree is: * 2^H * Node + 2^H - 1 * The leaf of the tree is an array, convert the number for the array. * Subtract the size of nodes not in the array * 2^H * Node + 2^H - 1 - (NUM_INTR_ED_LIST - 1) = * 2^H * Node + 2^H - NUM_INTR_ED_LIST = * 2^H * (Node + 1) - NUM_INTR_ED_LIST * 0 * 1 2 * 0 1 2 3 */ static uint_t ohci_leftmost_leaf( uint_t node, uint_t height) { return ((ohci_pow_2(height) * (node + 1)) - NUM_INTR_ED_LISTS); } /* * ohci_hcca_intr_index: * * Given a node in the lattice, find the index for the hcca interrupt table */ static uint_t ohci_hcca_intr_index(uint_t node) { /* * Adjust the node to the array representing * the bottom of the tree. */ node = node - NUM_STATIC_NODES; if ((node % 2) == 0) { return (ohci_index[node / 2]); } else { return (ohci_index[node / 2] + (NUM_INTR_ED_LISTS / 2)); } } /* * ohci_hcca_leaf_index: * * Given a node in the bottom leaf array of the lattice, find the index * for the hcca interrupt table */ static uint_t ohci_hcca_leaf_index(uint_t leaf) { if ((leaf % 2) == 0) { return (ohci_index[leaf / 2]); } else { return (ohci_index[leaf / 2] + (NUM_INTR_ED_LISTS / 2)); } } /* * ohci_pow_2: * * Compute 2 to the power */ static uint_t ohci_pow_2(uint_t x) { if (x == 0) { return (1); } else { return (2 << (x - 1)); } } /* * ohci_log_2: * * Compute log base 2 of x */ static uint_t ohci_log_2(uint_t x) { int i = 0; while (x != 1) { x = x >> 1; i++; } return (i); } /* * Endpoint Descriptor (ED) manipulations functions */ /* * ohci_alloc_hc_ed: * NOTE: This function is also called from POLLED MODE. * * Allocate an endpoint descriptor (ED) */ ohci_ed_t * ohci_alloc_hc_ed( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph) { int i, state; ohci_ed_t *hc_ed; USB_DPRINTF_L4(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_alloc_hc_ed: ph = 0x%p", (void *)ph); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * The first 31 endpoints in the Endpoint Descriptor (ED) * buffer pool are reserved for building interrupt lattice * tree. Search for a blank endpoint descriptor in the ED * buffer pool. */ for (i = NUM_STATIC_NODES; i < ohci_ed_pool_size; i ++) { state = Get_ED(ohcip->ohci_ed_pool_addr[i].hced_state); if (state == HC_EPT_FREE) { break; } } USB_DPRINTF_L4(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_alloc_hc_ed: Allocated %d", i); if (i == ohci_ed_pool_size) { USB_DPRINTF_L2(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_alloc_hc_ed: ED exhausted"); return (NULL); } else { hc_ed = &ohcip->ohci_ed_pool_addr[i]; USB_DPRINTF_L4(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_alloc_hc_ed: Allocated address 0x%p", (void *)hc_ed); ohci_print_ed(ohcip, hc_ed); /* Unpack the endpoint descriptor into a control field */ if (ph) { if ((ohci_initialize_dummy(ohcip, hc_ed)) == USB_NO_RESOURCES) { bzero((void *)hc_ed, sizeof (ohci_ed_t)); Set_ED(hc_ed->hced_state, HC_EPT_FREE); return (NULL); } Set_ED(hc_ed->hced_prev, NULL); Set_ED(hc_ed->hced_next, NULL); /* Change ED's state Active */ Set_ED(hc_ed->hced_state, HC_EPT_ACTIVE); Set_ED(hc_ed->hced_ctrl, ohci_unpack_endpoint(ohcip, ph)); } else { Set_ED(hc_ed->hced_ctrl, HC_EPT_sKip); /* Change ED's state Static */ Set_ED(hc_ed->hced_state, HC_EPT_STATIC); } return (hc_ed); } } /* * ohci_unpack_endpoint: * * Unpack the information in the pipe handle and create the first byte * of the Host Controller's (HC) Endpoint Descriptor (ED). */ static uint_t ohci_unpack_endpoint( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph) { usb_ep_descr_t *endpoint = &ph->p_ep; uint_t maxpacketsize, addr, ctrl = 0; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_unpack_endpoint:"); ctrl = ph->p_usba_device->usb_addr; addr = endpoint->bEndpointAddress; /* Assign the endpoint's address */ ctrl = ctrl | ((addr & USB_EP_NUM_MASK) << HC_EPT_EP_SHFT); /* * Assign the direction. If the endpoint is a control endpoint, * the direction is assigned by the Transfer Descriptor (TD). */ if ((endpoint->bmAttributes & USB_EP_ATTR_MASK) != USB_EP_ATTR_CONTROL) { if (addr & USB_EP_DIR_MASK) { /* The direction is IN */ ctrl = ctrl | HC_EPT_DF_IN; } else { /* The direction is OUT */ ctrl = ctrl | HC_EPT_DF_OUT; } } /* Assign the speed */ mutex_enter(&ph->p_usba_device->usb_mutex); if (ph->p_usba_device->usb_port_status == USBA_LOW_SPEED_DEV) { ctrl = ctrl | HC_EPT_Speed; } mutex_exit(&ph->p_usba_device->usb_mutex); /* Assign the format */ if ((endpoint->bmAttributes & USB_EP_ATTR_MASK) == USB_EP_ATTR_ISOCH) { ctrl = ctrl | HC_EPT_Format; } maxpacketsize = endpoint->wMaxPacketSize; maxpacketsize = maxpacketsize << HC_EPT_MAXPKTSZ; ctrl = ctrl | (maxpacketsize & HC_EPT_MPS); return (ctrl); } /* * ohci_insert_ed: * * Add the Endpoint Descriptor (ED) into the Host Controller's * (HC) appropriate endpoint list. */ static void ohci_insert_ed( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph) { ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_insert_ed:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); switch (ph->p_ep.bmAttributes & USB_EP_ATTR_MASK) { case USB_EP_ATTR_CONTROL: ohci_insert_ctrl_ed(ohcip, pp); break; case USB_EP_ATTR_BULK: ohci_insert_bulk_ed(ohcip, pp); break; case USB_EP_ATTR_INTR: ohci_insert_intr_ed(ohcip, pp); break; case USB_EP_ATTR_ISOCH: ohci_insert_isoc_ed(ohcip, pp); break; } } /* * ohci_insert_ctrl_ed: * * Insert a control endpoint into the Host Controller's (HC) * control endpoint list. */ static void ohci_insert_ctrl_ed( ohci_state_t *ohcip, ohci_pipe_private_t *pp) { ohci_ed_t *ept = pp->pp_ept; ohci_ed_t *prev_ept; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_insert_ctrl_ed:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* Obtain a ptr to the head of the list */ if (Get_OpReg(hcr_ctrl_head)) { prev_ept = ohci_ed_iommu_to_cpu(ohcip, Get_OpReg(hcr_ctrl_head)); /* Set up the backwards pointer */ Set_ED(prev_ept->hced_prev, ohci_ed_cpu_to_iommu(ohcip, ept)); } /* The new endpoint points to the head of the list */ Set_ED(ept->hced_next, Get_OpReg(hcr_ctrl_head)); /* Set the head ptr to the new endpoint */ Set_OpReg(hcr_ctrl_head, ohci_ed_cpu_to_iommu(ohcip, ept)); /* * Enable Control list processing if control open * pipe count is zero. */ if (!ohcip->ohci_open_ctrl_pipe_count) { /* Start Control list processing */ Set_OpReg(hcr_control, (Get_OpReg(hcr_control) | HCR_CONTROL_CLE)); } ohcip->ohci_open_ctrl_pipe_count++; } /* * ohci_insert_bulk_ed: * * Insert a bulk endpoint into the Host Controller's (HC) bulk endpoint list. */ static void ohci_insert_bulk_ed( ohci_state_t *ohcip, ohci_pipe_private_t *pp) { ohci_ed_t *ept = pp->pp_ept; ohci_ed_t *prev_ept; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_insert_bulk_ed:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* Obtain a ptr to the head of the Bulk list */ if (Get_OpReg(hcr_bulk_head)) { prev_ept = ohci_ed_iommu_to_cpu(ohcip, Get_OpReg(hcr_bulk_head)); /* Set up the backwards pointer */ Set_ED(prev_ept->hced_prev, ohci_ed_cpu_to_iommu(ohcip, ept)); } /* The new endpoint points to the head of the Bulk list */ Set_ED(ept->hced_next, Get_OpReg(hcr_bulk_head)); /* Set the Bulk head ptr to the new endpoint */ Set_OpReg(hcr_bulk_head, ohci_ed_cpu_to_iommu(ohcip, ept)); /* * Enable Bulk list processing if bulk open pipe * count is zero. */ if (!ohcip->ohci_open_bulk_pipe_count) { /* Start Bulk list processing */ Set_OpReg(hcr_control, (Get_OpReg(hcr_control) | HCR_CONTROL_BLE)); } ohcip->ohci_open_bulk_pipe_count++; } /* * ohci_insert_intr_ed: * * Insert a interrupt endpoint into the Host Controller's (HC) interrupt * lattice tree. */ static void ohci_insert_intr_ed( ohci_state_t *ohcip, ohci_pipe_private_t *pp) { ohci_ed_t *ept = pp->pp_ept; ohci_ed_t *next_lattice_ept, *lattice_ept; uint_t node; ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_insert_intr_ed:"); /* * The appropriate node was found * during the opening of the pipe. */ node = pp->pp_node; if (node >= NUM_STATIC_NODES) { /* Get the hcca interrupt table index */ node = ohci_hcca_intr_index(node); /* Get the first endpoint on the list */ next_lattice_ept = ohci_ed_iommu_to_cpu(ohcip, Get_HCCA(ohcip->ohci_hccap->HccaIntTble[node])); /* Update this endpoint to point to it */ Set_ED(ept->hced_next, ohci_ed_cpu_to_iommu(ohcip, next_lattice_ept)); /* Put this endpoint at the head of the list */ Set_HCCA(ohcip->ohci_hccap->HccaIntTble[node], ohci_ed_cpu_to_iommu(ohcip, ept)); /* The previous pointer is NULL */ Set_ED(ept->hced_prev, NULL); /* Update the previous pointer of ept->hced_next */ if (Get_ED(next_lattice_ept->hced_state) != HC_EPT_STATIC) { Set_ED(next_lattice_ept->hced_prev, ohci_ed_cpu_to_iommu(ohcip, ept)); } } else { /* Find the lattice endpoint */ lattice_ept = &ohcip->ohci_ed_pool_addr[node]; /* Find the next lattice endpoint */ next_lattice_ept = ohci_ed_iommu_to_cpu( ohcip, Get_ED(lattice_ept->hced_next)); /* * Update this endpoint to point to the next one in the * lattice. */ Set_ED(ept->hced_next, Get_ED(lattice_ept->hced_next)); /* Insert this endpoint into the lattice */ Set_ED(lattice_ept->hced_next, ohci_ed_cpu_to_iommu(ohcip, ept)); /* Update the previous pointer */ Set_ED(ept->hced_prev, ohci_ed_cpu_to_iommu(ohcip, lattice_ept)); /* Update the previous pointer of ept->hced_next */ if ((next_lattice_ept) && (Get_ED(next_lattice_ept->hced_state) != HC_EPT_STATIC)) { Set_ED(next_lattice_ept->hced_prev, ohci_ed_cpu_to_iommu(ohcip, ept)); } } /* * Enable periodic list processing if periodic (interrupt * and isochronous) open pipe count is zero. */ if (!ohcip->ohci_open_periodic_pipe_count) { ASSERT(!ohcip->ohci_open_isoch_pipe_count); Set_OpReg(hcr_control, (Get_OpReg(hcr_control) | HCR_CONTROL_PLE)); } ohcip->ohci_open_periodic_pipe_count++; } /* * ohci_insert_isoc_ed: * * Insert a isochronous endpoint into the Host Controller's (HC) interrupt * lattice tree. A isochronous endpoint will be inserted at the end of the * 1ms interrupt endpoint list. */ static void ohci_insert_isoc_ed( ohci_state_t *ohcip, ohci_pipe_private_t *pp) { ohci_ed_t *next_lattice_ept, *lattice_ept; ohci_ed_t *ept = pp->pp_ept; uint_t node; ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_insert_isoc_ed:"); /* * The appropriate node was found during the opening of the pipe. * This node must be root of the interrupt lattice tree. */ node = pp->pp_node; ASSERT(node == 0); /* Find the 1ms interrupt lattice endpoint */ lattice_ept = &ohcip->ohci_ed_pool_addr[node]; /* Find the next lattice endpoint */ next_lattice_ept = ohci_ed_iommu_to_cpu( ohcip, Get_ED(lattice_ept->hced_next)); while (next_lattice_ept) { lattice_ept = next_lattice_ept; /* Find the next lattice endpoint */ next_lattice_ept = ohci_ed_iommu_to_cpu( ohcip, Get_ED(lattice_ept->hced_next)); } /* The next pointer is NULL */ Set_ED(ept->hced_next, NULL); /* Update the previous pointer */ Set_ED(ept->hced_prev, ohci_ed_cpu_to_iommu(ohcip, lattice_ept)); /* Insert this endpoint into the lattice */ Set_ED(lattice_ept->hced_next, ohci_ed_cpu_to_iommu(ohcip, ept)); /* * Enable periodic and isoch lists processing if isoch * open pipe count is zero. */ if (!ohcip->ohci_open_isoch_pipe_count) { Set_OpReg(hcr_control, (Get_OpReg(hcr_control) | HCR_CONTROL_PLE | HCR_CONTROL_IE)); } ohcip->ohci_open_periodic_pipe_count++; ohcip->ohci_open_isoch_pipe_count++; } /* * ohci_modify_sKip_bit: * * Modify the sKip bit on the Host Controller (HC) Endpoint Descriptor (ED). */ static void ohci_modify_sKip_bit( ohci_state_t *ohcip, ohci_pipe_private_t *pp, skip_bit_t action, usb_flags_t flag) { ohci_ed_t *ept = pp->pp_ept; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_modify_sKip_bit: action = 0x%x flag = 0x%x", action, flag); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); if (action == CLEAR_sKip) { /* * If the skip bit is to be cleared, just clear it. * there shouldn't be any race condition problems. * If the host controller reads the bit before the * driver has a chance to set the bit, the bit will * be reread on the next frame. */ Set_ED(ept->hced_ctrl, (Get_ED(ept->hced_ctrl) & ~HC_EPT_sKip)); } else { /* Sync ED and TD pool */ if (flag & OHCI_FLAGS_DMA_SYNC) { Sync_ED_TD_Pool(ohcip); } /* Check Halt or Skip bit is already set */ if ((Get_ED(ept->hced_headp) & HC_EPT_Halt) || (Get_ED(ept->hced_ctrl) & HC_EPT_sKip)) { USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_modify_sKip_bit: " "Halt or Skip bit is already set"); } else { /* * The action is to set the skip bit. In order to * be sure that the HCD has seen the sKip bit, wait * for the next start of frame. */ Set_ED(ept->hced_ctrl, (Get_ED(ept->hced_ctrl) | HC_EPT_sKip)); if (flag & OHCI_FLAGS_SLEEP) { /* Wait for the next SOF */ (void) ohci_wait_for_sof(ohcip); /* Sync ED and TD pool */ if (flag & OHCI_FLAGS_DMA_SYNC) { Sync_ED_TD_Pool(ohcip); } } } } } /* * ohci_remove_ed: * * Remove the Endpoint Descriptor (ED) from the Host Controller's appropriate * endpoint list. */ static void ohci_remove_ed( ohci_state_t *ohcip, ohci_pipe_private_t *pp) { uchar_t attributes; ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_remove_ed:"); attributes = pp->pp_pipe_handle->p_ep.bmAttributes & USB_EP_ATTR_MASK; switch (attributes) { case USB_EP_ATTR_CONTROL: ohci_remove_ctrl_ed(ohcip, pp); break; case USB_EP_ATTR_BULK: ohci_remove_bulk_ed(ohcip, pp); break; case USB_EP_ATTR_INTR: case USB_EP_ATTR_ISOCH: ohci_remove_periodic_ed(ohcip, pp); break; } } /* * ohci_remove_ctrl_ed: * * Remove a control Endpoint Descriptor (ED) from the Host Controller's (HC) * control endpoint list. */ static void ohci_remove_ctrl_ed( ohci_state_t *ohcip, ohci_pipe_private_t *pp) { ohci_ed_t *ept = pp->pp_ept; /* ept to be removed */ USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_remove_ctrl_ed:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* The control list should already be stopped */ ASSERT(!(Get_OpReg(hcr_control) & HCR_CONTROL_CLE)); ohcip->ohci_open_ctrl_pipe_count--; /* Detach the endpoint from the list that it's on */ ohci_detach_ed_from_list(ohcip, ept, USB_EP_ATTR_CONTROL); /* * If next endpoint pointed by endpoint to be removed is not NULL * then set current control pointer to the next endpoint pointed by * endpoint to be removed. Otherwise set current control pointer to * the beginning of the control list. */ if (Get_ED(ept->hced_next)) { Set_OpReg(hcr_ctrl_curr, Get_ED(ept->hced_next)); } else { Set_OpReg(hcr_ctrl_curr, Get_OpReg(hcr_ctrl_head)); } if (ohcip->ohci_open_ctrl_pipe_count) { ASSERT(Get_OpReg(hcr_ctrl_head)); /* Reenable the control list */ Set_OpReg(hcr_control, (Get_OpReg(hcr_control) | HCR_CONTROL_CLE)); } ohci_insert_ed_on_reclaim_list(ohcip, pp); } /* * ohci_remove_bulk_ed: * * Remove free the bulk Endpoint Descriptor (ED) from the Host Controller's * (HC) bulk endpoint list. */ static void ohci_remove_bulk_ed( ohci_state_t *ohcip, ohci_pipe_private_t *pp) { ohci_ed_t *ept = pp->pp_ept; /* ept to be removed */ USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_remove_bulk_ed:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* The bulk list should already be stopped */ ASSERT(!(Get_OpReg(hcr_control) & HCR_CONTROL_BLE)); ohcip->ohci_open_bulk_pipe_count--; /* Detach the endpoint from the bulk list */ ohci_detach_ed_from_list(ohcip, ept, USB_EP_ATTR_BULK); /* * If next endpoint pointed by endpoint to be removed is not NULL * then set current bulk pointer to the next endpoint pointed by * endpoint to be removed. Otherwise set current bulk pointer to * the beginning of the bulk list. */ if (Get_ED(ept->hced_next)) { Set_OpReg(hcr_bulk_curr, Get_ED(ept->hced_next)); } else { Set_OpReg(hcr_bulk_curr, Get_OpReg(hcr_bulk_head)); } if (ohcip->ohci_open_bulk_pipe_count) { ASSERT(Get_OpReg(hcr_bulk_head)); /* Re-enable the bulk list */ Set_OpReg(hcr_control, (Get_OpReg(hcr_control) | HCR_CONTROL_BLE)); } ohci_insert_ed_on_reclaim_list(ohcip, pp); } /* * ohci_remove_periodic_ed: * * Set up an periodic endpoint to be removed from the Host Controller's (HC) * interrupt lattice tree. The Endpoint Descriptor (ED) will be freed in the * interrupt handler. */ static void ohci_remove_periodic_ed( ohci_state_t *ohcip, ohci_pipe_private_t *pp) { ohci_ed_t *ept = pp->pp_ept; /* ept to be removed */ uint_t ept_type; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_remove_periodic_ed:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); ASSERT((Get_ED(ept->hced_tailp) & HC_EPT_TD_TAIL) == (Get_ED(ept->hced_headp) & HC_EPT_TD_HEAD)); ohcip->ohci_open_periodic_pipe_count--; ept_type = pp->pp_pipe_handle-> p_ep.bmAttributes & USB_EP_ATTR_MASK; if (ept_type == USB_EP_ATTR_ISOCH) { ohcip->ohci_open_isoch_pipe_count--; } /* Store the node number */ Set_ED(ept->hced_node, pp->pp_node); /* Remove the endpoint from interrupt lattice tree */ ohci_detach_ed_from_list(ohcip, ept, ept_type); /* * Disable isoch list processing if isoch open pipe count * is zero. */ if (!ohcip->ohci_open_isoch_pipe_count) { Set_OpReg(hcr_control, (Get_OpReg(hcr_control) & ~(HCR_CONTROL_IE))); } /* * Disable periodic list processing if periodic (interrupt * and isochrous) open pipe count is zero. */ if (!ohcip->ohci_open_periodic_pipe_count) { ASSERT(!ohcip->ohci_open_isoch_pipe_count); Set_OpReg(hcr_control, (Get_OpReg(hcr_control) & ~(HCR_CONTROL_PLE))); } ohci_insert_ed_on_reclaim_list(ohcip, pp); } /* * ohci_detach_ed_from_list: * * Remove the Endpoint Descriptor (ED) from the appropriate Host Controller's * (HC) endpoint list. */ static void ohci_detach_ed_from_list( ohci_state_t *ohcip, ohci_ed_t *ept, uint_t ept_type) { ohci_ed_t *prev_ept; /* Previous endpoint */ ohci_ed_t *next_ept; /* Endpoint after one to be removed */ uint_t node; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_detach_ed_from_list:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); prev_ept = ohci_ed_iommu_to_cpu(ohcip, Get_ED(ept->hced_prev)); next_ept = ohci_ed_iommu_to_cpu(ohcip, Get_ED(ept->hced_next)); /* * If there is no previous endpoint, then this * endpoint is at the head of the endpoint list. */ if (prev_ept == NULL) { if (next_ept) { /* * If this endpoint is the first element of the * list and there is more than one endpoint on * the list then perform specific actions based * on the type of endpoint list. */ switch (ept_type) { case USB_EP_ATTR_CONTROL: /* Set the head of list to next ept */ Set_OpReg(hcr_ctrl_head, Get_ED(ept->hced_next)); /* Clear prev ptr of next endpoint */ Set_ED(next_ept->hced_prev, NULL); break; case USB_EP_ATTR_BULK: /* Set the head of list to next ept */ Set_OpReg(hcr_bulk_head, Get_ED(ept->hced_next)); /* Clear prev ptr of next endpoint */ Set_ED(next_ept->hced_prev, NULL); break; case USB_EP_ATTR_INTR: /* * HCCA area should point * directly to this ept. */ ASSERT(Get_ED(ept->hced_node) >= NUM_STATIC_NODES); /* Get the hcca interrupt table index */ node = ohci_hcca_intr_index( Get_ED(ept->hced_node)); /* * Delete the ept from the * bottom of the tree. */ Set_HCCA(ohcip->ohci_hccap-> HccaIntTble[node], Get_ED(ept->hced_next)); /* * Update the previous pointer * of ept->hced_next */ if (Get_ED(next_ept->hced_state) != HC_EPT_STATIC) { Set_ED(next_ept->hced_prev, NULL); } break; case USB_EP_ATTR_ISOCH: default: break; } } else { /* * If there was only one element on the list * perform specific actions based on the type * of the list. */ switch (ept_type) { case USB_EP_ATTR_CONTROL: /* Set the head to NULL */ Set_OpReg(hcr_ctrl_head, NULL); break; case USB_EP_ATTR_BULK: /* Set the head to NULL */ Set_OpReg(hcr_bulk_head, NULL); break; case USB_EP_ATTR_INTR: case USB_EP_ATTR_ISOCH: default: break; } } } else { /* The previous ept points to the next one */ Set_ED(prev_ept->hced_next, Get_ED(ept->hced_next)); /* * Set the previous ptr of the next_ept to prev_ept * if this isn't the last endpoint on the list */ if ((next_ept) && (Get_ED(next_ept->hced_state) != HC_EPT_STATIC)) { /* Set the previous ptr of the next one */ Set_ED(next_ept->hced_prev, Get_ED(ept->hced_prev)); } } } /* * ohci_insert_ed_on_reclaim_list: * * Insert Endpoint onto the reclaim list */ static void ohci_insert_ed_on_reclaim_list( ohci_state_t *ohcip, ohci_pipe_private_t *pp) { ohci_ed_t *ept = pp->pp_ept; /* ept to be removed */ ohci_ed_t *next_ept, *prev_ept; usb_frame_number_t frame_number; ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Read current usb frame number and add appropriate number of * usb frames needs to wait before reclaiming current endpoint. */ frame_number = ohci_get_current_frame_number(ohcip) + MAX_SOF_WAIT_COUNT; /* Store 32bit ID */ Set_ED(ept->hced_reclaim_frame, ((uint32_t)(OHCI_GET_ID((void *)(uintptr_t)frame_number)))); /* Insert the endpoint onto the reclaimation list */ if (ohcip->ohci_reclaim_list) { next_ept = ohcip->ohci_reclaim_list; while (next_ept) { prev_ept = next_ept; next_ept = ohci_ed_iommu_to_cpu(ohcip, Get_ED(next_ept->hced_reclaim_next)); } Set_ED(prev_ept->hced_reclaim_next, ohci_ed_cpu_to_iommu(ohcip, ept)); } else { ohcip->ohci_reclaim_list = ept; } ASSERT(Get_ED(ept->hced_reclaim_next) == NULL); /* Enable the SOF interrupt */ Set_OpReg(hcr_intr_enable, HCR_INTR_SOF); } /* * ohci_deallocate_ed: * NOTE: This function is also called from POLLED MODE. * * Deallocate a Host Controller's (HC) Endpoint Descriptor (ED). */ void ohci_deallocate_ed( ohci_state_t *ohcip, ohci_ed_t *old_ed) { ohci_td_t *dummy_td; USB_DPRINTF_L4(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_deallocate_ed:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); dummy_td = ohci_td_iommu_to_cpu(ohcip, Get_ED(old_ed->hced_headp)); if (dummy_td) { ASSERT(Get_TD(dummy_td->hctd_state) == HC_TD_DUMMY); ohci_deallocate_td(ohcip, dummy_td); } USB_DPRINTF_L4(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_deallocate_ed: Deallocated 0x%p", (void *)old_ed); bzero((void *)old_ed, sizeof (ohci_ed_t)); Set_ED(old_ed->hced_state, HC_EPT_FREE); } /* * ohci_ed_cpu_to_iommu: * NOTE: This function is also called from POLLED MODE. * * This function converts for the given Endpoint Descriptor (ED) CPU address * to IO address. */ uint32_t ohci_ed_cpu_to_iommu( ohci_state_t *ohcip, ohci_ed_t *addr) { uint32_t ed; ed = (uint32_t)ohcip->ohci_ed_pool_cookie.dmac_address + (uint32_t)((uintptr_t)addr - (uintptr_t)(ohcip->ohci_ed_pool_addr)); ASSERT(ed >= ohcip->ohci_ed_pool_cookie.dmac_address); ASSERT(ed <= ohcip->ohci_ed_pool_cookie.dmac_address + sizeof (ohci_ed_t) * ohci_ed_pool_size); return (ed); } /* * ohci_ed_iommu_to_cpu: * * This function converts for the given Endpoint Descriptor (ED) IO address * to CPU address. */ static ohci_ed_t * ohci_ed_iommu_to_cpu( ohci_state_t *ohcip, uintptr_t addr) { ohci_ed_t *ed; if (addr == NULL) { return (NULL); } ed = (ohci_ed_t *)((uintptr_t) (addr - ohcip->ohci_ed_pool_cookie.dmac_address) + (uintptr_t)ohcip->ohci_ed_pool_addr); ASSERT(ed >= ohcip->ohci_ed_pool_addr); ASSERT((uintptr_t)ed <= (uintptr_t)ohcip->ohci_ed_pool_addr + (uintptr_t)(sizeof (ohci_ed_t) * ohci_ed_pool_size)); return (ed); } /* * Transfer Descriptor manipulations functions */ /* * ohci_initialize_dummy: * * An Endpoint Descriptor (ED) has a dummy Transfer Descriptor (TD) on the * end of its TD list. Initially, both the head and tail pointers of the ED * point to the dummy TD. */ static int ohci_initialize_dummy( ohci_state_t *ohcip, ohci_ed_t *ept) { ohci_td_t *dummy; /* Obtain a dummy TD */ dummy = ohci_allocate_td_from_pool(ohcip); if (dummy == NULL) { return (USB_NO_RESOURCES); } /* * Both the head and tail pointers of an ED point * to this new dummy TD. */ Set_ED(ept->hced_headp, (ohci_td_cpu_to_iommu(ohcip, dummy))); Set_ED(ept->hced_tailp, (ohci_td_cpu_to_iommu(ohcip, dummy))); return (USB_SUCCESS); } /* * ohci_allocate_ctrl_resources: * * Calculates the number of tds necessary for a ctrl transfer, and allocates * all the resources necessary. * * Returns NULL if there is insufficient resources otherwise TW. */ static ohci_trans_wrapper_t * ohci_allocate_ctrl_resources( ohci_state_t *ohcip, ohci_pipe_private_t *pp, usb_ctrl_req_t *ctrl_reqp, usb_flags_t usb_flags) { size_t td_count = 2; size_t ctrl_buf_size; ohci_trans_wrapper_t *tw; /* Add one more td for data phase */ if (ctrl_reqp->ctrl_wLength) { td_count++; } /* * If we have a control data phase, the data buffer starts * on the next 4K page boundary. So the TW buffer is allocated * to be larger than required. The buffer in the range of * [SETUP_SIZE, OHCI_MAX_TD_BUF_SIZE) is just for padding * and not to be transferred. */ if (ctrl_reqp->ctrl_wLength) { ctrl_buf_size = OHCI_MAX_TD_BUF_SIZE + ctrl_reqp->ctrl_wLength; } else { ctrl_buf_size = SETUP_SIZE; } tw = ohci_allocate_tw_resources(ohcip, pp, ctrl_buf_size, usb_flags, td_count); return (tw); } /* * ohci_insert_ctrl_req: * * Create a Transfer Descriptor (TD) and a data buffer for a control endpoint. */ /* ARGSUSED */ static void ohci_insert_ctrl_req( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph, usb_ctrl_req_t *ctrl_reqp, ohci_trans_wrapper_t *tw, usb_flags_t usb_flags) { ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; uchar_t bmRequestType = ctrl_reqp->ctrl_bmRequestType; uchar_t bRequest = ctrl_reqp->ctrl_bRequest; uint16_t wValue = ctrl_reqp->ctrl_wValue; uint16_t wIndex = ctrl_reqp->ctrl_wIndex; uint16_t wLength = ctrl_reqp->ctrl_wLength; mblk_t *data = ctrl_reqp->ctrl_data; uint32_t ctrl = 0; int sdata; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_insert_ctrl_req:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Save current control request pointer and timeout values * in transfer wrapper. */ tw->tw_curr_xfer_reqp = (usb_opaque_t)ctrl_reqp; tw->tw_timeout = ctrl_reqp->ctrl_timeout ? ctrl_reqp->ctrl_timeout : OHCI_DEFAULT_XFER_TIMEOUT; /* * Initialize the callback and any callback data for when * the td completes. */ tw->tw_handle_td = ohci_handle_ctrl_td; tw->tw_handle_callback_value = NULL; /* Create the first four bytes of the setup packet */ sdata = (bmRequestType << 24) | (bRequest << 16) | (((wValue >> 8) | (wValue << 8)) & 0x0000FFFF); USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_create_setup_pkt: sdata = 0x%x", sdata); ddi_put32(tw->tw_accesshandle, (uint_t *)tw->tw_buf, sdata); /* Create the second four bytes */ sdata = (uint32_t)(((((wIndex >> 8) | (wIndex << 8)) << 16) & 0xFFFF0000) | (((wLength >> 8) | (wLength << 8)) & 0x0000FFFF)); USB_DPRINTF_L4(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_create_setup_pkt: sdata = 0x%x", sdata); ddi_put32(tw->tw_accesshandle, (uint_t *)(tw->tw_buf + sizeof (uint_t)), sdata); ctrl = HC_TD_SETUP|HC_TD_MS_DT|HC_TD_DT_0|HC_TD_6I; /* * The TD's are placed on the ED one at a time. * Once this TD is placed on the done list, the * data or status phase TD will be enqueued. */ (void) ohci_insert_hc_td(ohcip, ctrl, 0, SETUP_SIZE, OHCI_CTRL_SETUP_PHASE, pp, tw); USB_DPRINTF_L3(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "Create_setup: pp 0x%p", (void *)pp); /* * If this control transfer has a data phase, record the * direction. If the data phase is an OUT transaction, * copy the data into the buffer of the transfer wrapper. */ if (wLength != 0) { /* There is a data stage. Find the direction */ if (bmRequestType & USB_DEV_REQ_DEV_TO_HOST) { tw->tw_direction = HC_TD_IN; } else { tw->tw_direction = HC_TD_OUT; /* Copy the data into the message */ ddi_rep_put8(tw->tw_accesshandle, data->b_rptr, (uint8_t *)(tw->tw_buf + OHCI_MAX_TD_BUF_SIZE), wLength, DDI_DEV_AUTOINCR); } ctrl = (ctrl_reqp->ctrl_attributes & USB_ATTRS_SHORT_XFER_OK) ? HC_TD_R : 0; /* * There is a data stage. * Find the direction. */ if (tw->tw_direction == HC_TD_IN) { ctrl = ctrl|HC_TD_IN|HC_TD_MS_DT|HC_TD_DT_1|HC_TD_6I; } else { ctrl = ctrl|HC_TD_OUT|HC_TD_MS_DT|HC_TD_DT_1|HC_TD_6I; } /* * Create the TD. If this is an OUT transaction, * the data is already in the buffer of the TW. */ (void) ohci_insert_hc_td(ohcip, ctrl, OHCI_MAX_TD_BUF_SIZE, wLength, OHCI_CTRL_DATA_PHASE, pp, tw); /* * The direction of the STATUS TD depends on * the direction of the transfer. */ if (tw->tw_direction == HC_TD_IN) { ctrl = HC_TD_OUT|HC_TD_MS_DT|HC_TD_DT_1|HC_TD_1I; } else { ctrl = HC_TD_IN|HC_TD_MS_DT|HC_TD_DT_1|HC_TD_1I; } } else { ctrl = HC_TD_IN|HC_TD_MS_DT|HC_TD_DT_1|HC_TD_1I; } /* Status stage */ (void) ohci_insert_hc_td(ohcip, ctrl, 0, 0, OHCI_CTRL_STATUS_PHASE, pp, tw); /* Indicate that the control list is filled */ Set_OpReg(hcr_cmd_status, HCR_STATUS_CLF); /* Start the timer for this control transfer */ ohci_start_xfer_timer(ohcip, pp, tw); } /* * ohci_allocate_bulk_resources: * * Calculates the number of tds necessary for a ctrl transfer, and allocates * all the resources necessary. * * Returns NULL if there is insufficient resources otherwise TW. */ static ohci_trans_wrapper_t * ohci_allocate_bulk_resources( ohci_state_t *ohcip, ohci_pipe_private_t *pp, usb_bulk_req_t *bulk_reqp, usb_flags_t usb_flags) { size_t td_count = 0; ohci_trans_wrapper_t *tw; /* Check the size of bulk request */ if (bulk_reqp->bulk_len > OHCI_MAX_BULK_XFER_SIZE) { USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_allocate_bulk_resources: Bulk request size 0x%x is " "more than 0x%x", bulk_reqp->bulk_len, OHCI_MAX_BULK_XFER_SIZE); return (NULL); } /* Get the required bulk packet size */ td_count = bulk_reqp->bulk_len / OHCI_MAX_TD_XFER_SIZE; if (bulk_reqp->bulk_len % OHCI_MAX_TD_XFER_SIZE) { td_count++; } tw = ohci_allocate_tw_resources(ohcip, pp, bulk_reqp->bulk_len, usb_flags, td_count); return (tw); } /* * ohci_insert_bulk_req: * * Create a Transfer Descriptor (TD) and a data buffer for a bulk * endpoint. */ /* ARGSUSED */ static void ohci_insert_bulk_req( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph, usb_bulk_req_t *bulk_reqp, ohci_trans_wrapper_t *tw, usb_flags_t flags) { ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; uint_t bulk_pkt_size, count; size_t residue = 0, len = 0; uint32_t ctrl = 0; int pipe_dir; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_insert_bulk_req: bulk_reqp = 0x%p flags = 0x%x", bulk_reqp, flags); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* Get the bulk pipe direction */ pipe_dir = ph->p_ep.bEndpointAddress & USB_EP_DIR_MASK; /* Get the required bulk packet size */ bulk_pkt_size = min(bulk_reqp->bulk_len, OHCI_MAX_TD_XFER_SIZE); residue = tw->tw_length % bulk_pkt_size; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_insert_bulk_req: bulk_pkt_size = %d", bulk_pkt_size); /* * Save current bulk request pointer and timeout values * in transfer wrapper. */ tw->tw_curr_xfer_reqp = (usb_opaque_t)bulk_reqp; tw->tw_timeout = bulk_reqp->bulk_timeout; /* * Initialize the callback and any callback * data required when the td completes. */ tw->tw_handle_td = ohci_handle_bulk_td; tw->tw_handle_callback_value = NULL; tw->tw_direction = (pipe_dir == USB_EP_DIR_OUT) ? HC_TD_OUT : HC_TD_IN; if (tw->tw_direction == HC_TD_OUT) { ASSERT(bulk_reqp->bulk_data != NULL); /* Copy the data into the message */ ddi_rep_put8(tw->tw_accesshandle, bulk_reqp->bulk_data->b_rptr, (uint8_t *)tw->tw_buf, bulk_reqp->bulk_len, DDI_DEV_AUTOINCR); } ctrl = tw->tw_direction|HC_TD_DT_0|HC_TD_6I; /* Insert all the bulk TDs */ for (count = 0; count < tw->tw_num_tds; count++) { /* Check for last td */ if (count == (tw->tw_num_tds - 1)) { ctrl = ((ctrl & ~HC_TD_DI) | HC_TD_1I); /* Check for inserting residue data */ if (residue) { bulk_pkt_size = residue; } /* * Only set the round bit on the last TD, to ensure * the controller will always HALT the ED in case of * a short transfer. */ if (bulk_reqp->bulk_attributes & USB_ATTRS_SHORT_XFER_OK) { ctrl |= HC_TD_R; } } /* Insert the TD onto the endpoint */ (void) ohci_insert_hc_td(ohcip, ctrl, len, bulk_pkt_size, 0, pp, tw); len = len + bulk_pkt_size; } /* Indicate that the bulk list is filled */ Set_OpReg(hcr_cmd_status, HCR_STATUS_BLF); /* Start the timer for this bulk transfer */ ohci_start_xfer_timer(ohcip, pp, tw); } /* * ohci_start_periodic_pipe_polling: * NOTE: This function is also called from POLLED MODE. */ int ohci_start_periodic_pipe_polling( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph, usb_opaque_t periodic_in_reqp, usb_flags_t flags) { ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; usb_ep_descr_t *eptd = &ph->p_ep; int error = USB_SUCCESS; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_start_periodic_pipe_polling: ep%d", ph->p_ep.bEndpointAddress & USB_EP_NUM_MASK); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Check and handle start polling on root hub interrupt pipe. */ if ((ph->p_usba_device->usb_addr == ROOT_HUB_ADDR) && ((eptd->bmAttributes & USB_EP_ATTR_MASK) == USB_EP_ATTR_INTR)) { error = ohci_handle_root_hub_pipe_start_intr_polling(ph, (usb_intr_req_t *)periodic_in_reqp, flags); return (error); } switch (pp->pp_state) { case OHCI_PIPE_STATE_IDLE: /* Save the Original client's Periodic IN request */ pp->pp_client_periodic_in_reqp = periodic_in_reqp; /* * This pipe is uninitialized or if a valid TD is * not found then insert a TD on the interrupt or * isochronous IN endpoint. */ error = ohci_start_pipe_polling(ohcip, ph, flags); if (error != USB_SUCCESS) { USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_start_periodic_pipe_polling: " "Start polling failed"); pp->pp_client_periodic_in_reqp = NULL; return (error); } USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_start_periodic_pipe_polling: PP = 0x%p", pp); ASSERT((pp->pp_tw_head != NULL) && (pp->pp_tw_tail != NULL)); break; case OHCI_PIPE_STATE_ACTIVE: USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_start_periodic_pipe_polling: " "Polling is already in progress"); error = USB_FAILURE; break; case OHCI_PIPE_STATE_ERROR: USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_start_periodic_pipe_polling: " "Pipe is halted and perform reset before restart polling"); error = USB_FAILURE; break; default: USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_start_periodic_pipe_polling: Undefined state"); error = USB_FAILURE; break; } return (error); } /* * ohci_start_pipe_polling: * * Insert the number of periodic requests corresponding to polling * interval as calculated during pipe open. */ static int ohci_start_pipe_polling( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph, usb_flags_t flags) { ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; usb_ep_descr_t *eptd = &ph->p_ep; ohci_trans_wrapper_t *tw_list, *tw; int i, total_tws; int error = USB_SUCCESS; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_start_pipe_polling:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * For the start polling, pp_max_periodic_req_cnt will be zero * and for the restart polling request, it will be non zero. * * In case of start polling request, find out number of requests * required for the Interrupt IN endpoints corresponding to the * endpoint polling interval. For Isochronous IN endpoints, it is * always fixed since its polling interval will be one ms. */ if (pp->pp_max_periodic_req_cnt == 0) { ohci_set_periodic_pipe_polling(ohcip, ph); } ASSERT(pp->pp_max_periodic_req_cnt != 0); /* Allocate all the necessary resources for the IN transfer */ tw_list = NULL; total_tws = pp->pp_max_periodic_req_cnt - pp->pp_cur_periodic_req_cnt; for (i = 0; i < total_tws; i++) { switch (eptd->bmAttributes & USB_EP_ATTR_MASK) { case USB_EP_ATTR_INTR: tw = ohci_allocate_intr_resources( ohcip, ph, NULL, flags); break; case USB_EP_ATTR_ISOCH: tw = ohci_allocate_isoc_resources( ohcip, ph, NULL, flags); break; } if (tw == NULL) { error = USB_NO_RESOURCES; /* There are not enough resources, deallocate the TWs */ tw = tw_list; while (tw != NULL) { tw_list = tw->tw_next; ohci_deallocate_periodic_in_resource( ohcip, pp, tw); ohci_deallocate_tw_resources(ohcip, pp, tw); tw = tw_list; } return (error); } else { if (tw_list == NULL) { tw_list = tw; } } } i = 0; while (pp->pp_cur_periodic_req_cnt < pp->pp_max_periodic_req_cnt) { USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_start_pipe_polling: max = %d curr = %d tw = %p:", pp->pp_max_periodic_req_cnt, pp->pp_cur_periodic_req_cnt, tw_list); tw = tw_list; tw_list = tw->tw_next; switch (eptd->bmAttributes & USB_EP_ATTR_MASK) { case USB_EP_ATTR_INTR: ohci_insert_intr_req(ohcip, pp, tw, flags); break; case USB_EP_ATTR_ISOCH: error = ohci_insert_isoc_req(ohcip, pp, tw, flags); break; } if (error == USB_SUCCESS) { pp->pp_cur_periodic_req_cnt++; } else { /* * Deallocate the remaining tw * The current tw should have already been deallocated */ tw = tw_list; while (tw != NULL) { tw_list = tw->tw_next; ohci_deallocate_periodic_in_resource( ohcip, pp, tw); ohci_deallocate_tw_resources(ohcip, pp, tw); tw = tw_list; } /* * If this is the first req return an error. * Otherwise return success. */ if (i != 0) { error = USB_SUCCESS; } break; } i++; } return (error); } /* * ohci_set_periodic_pipe_polling: * * Calculate the number of periodic requests needed corresponding to the * interrupt/isochronous IN endpoints polling interval. Table below gives * the number of periodic requests needed for the interrupt/isochronous * IN endpoints according to endpoint polling interval. * * Polling interval Number of periodic requests * * 1ms 4 * 2ms 2 * 4ms to 32ms 1 */ static void ohci_set_periodic_pipe_polling( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph) { ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; usb_ep_descr_t *endpoint = &ph->p_ep; uchar_t ep_attr = endpoint->bmAttributes; uint_t interval; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_set_periodic_pipe_polling:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); pp->pp_cur_periodic_req_cnt = 0; /* * Check usb flag whether USB_FLAGS_ONE_TIME_POLL flag is * set and if so, set pp->pp_max_periodic_req_cnt to one. */ if (((ep_attr & USB_EP_ATTR_MASK) == USB_EP_ATTR_INTR) && (pp->pp_client_periodic_in_reqp)) { usb_intr_req_t *intr_reqp = (usb_intr_req_t *)pp->pp_client_periodic_in_reqp; if (intr_reqp->intr_attributes & USB_ATTRS_ONE_XFER) { pp->pp_max_periodic_req_cnt = INTR_XMS_REQS; return; } } mutex_enter(&ph->p_usba_device->usb_mutex); /* * The ohci_adjust_polling_interval function will not fail * at this instance since bandwidth allocation is already * done. Here we are getting only the periodic interval. */ interval = ohci_adjust_polling_interval(ohcip, endpoint, ph->p_usba_device->usb_port_status); mutex_exit(&ph->p_usba_device->usb_mutex); switch (interval) { case INTR_1MS_POLL: pp->pp_max_periodic_req_cnt = INTR_1MS_REQS; break; case INTR_2MS_POLL: pp->pp_max_periodic_req_cnt = INTR_2MS_REQS; break; default: pp->pp_max_periodic_req_cnt = INTR_XMS_REQS; break; } USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_set_periodic_pipe_polling: Max periodic requests = %d", pp->pp_max_periodic_req_cnt); } /* * ohci_allocate_intr_resources: * * Calculates the number of tds necessary for a intr transfer, and allocates * all the necessary resources. * * Returns NULL if there is insufficient resources otherwise TW. */ static ohci_trans_wrapper_t * ohci_allocate_intr_resources( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph, usb_intr_req_t *intr_reqp, usb_flags_t flags) { ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; int pipe_dir; size_t td_count = 1; size_t tw_length; ohci_trans_wrapper_t *tw; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_allocate_intr_resources:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); pipe_dir = ph->p_ep.bEndpointAddress & USB_EP_DIR_MASK; /* Get the length of interrupt transfer & alloc data */ if (intr_reqp) { tw_length = intr_reqp->intr_len; } else { ASSERT(pipe_dir == USB_EP_DIR_IN); tw_length = (pp->pp_client_periodic_in_reqp) ? (((usb_intr_req_t *)pp-> pp_client_periodic_in_reqp)->intr_len) : ph->p_ep.wMaxPacketSize; } /* Check the size of interrupt request */ if (tw_length > OHCI_MAX_TD_XFER_SIZE) { USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_allocate_intr_resources: Intr request size 0x%lx is " "more than 0x%x", tw_length, OHCI_MAX_TD_XFER_SIZE); return (NULL); } if ((tw = ohci_allocate_tw_resources(ohcip, pp, tw_length, flags, td_count)) == NULL) { return (NULL); } if (pipe_dir == USB_EP_DIR_IN) { if (ohci_allocate_periodic_in_resource(ohcip, pp, tw, flags) != USB_SUCCESS) { ohci_deallocate_tw_resources(ohcip, pp, tw); return (NULL); } tw->tw_direction = HC_TD_IN; } else { ASSERT(intr_reqp->intr_data != NULL); /* Copy the data into the message */ ddi_rep_put8(tw->tw_accesshandle, intr_reqp->intr_data->b_rptr, (uint8_t *)tw->tw_buf, intr_reqp->intr_len, DDI_DEV_AUTOINCR); tw->tw_curr_xfer_reqp = (usb_opaque_t)intr_reqp; tw->tw_direction = HC_TD_OUT; } if (intr_reqp) { tw->tw_timeout = intr_reqp->intr_timeout; } /* * Initialize the callback and any callback * data required when the td completes. */ tw->tw_handle_td = ohci_handle_intr_td; tw->tw_handle_callback_value = NULL; return (tw); } /* * ohci_insert_intr_req: * * Insert an Interrupt request into the Host Controller's periodic list. */ /* ARGSUSED */ static void ohci_insert_intr_req( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, usb_flags_t flags) { usb_intr_req_t *curr_intr_reqp = NULL; uint_t ctrl = 0; ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); ASSERT(tw->tw_curr_xfer_reqp != NULL); /* Get the current interrupt request pointer */ curr_intr_reqp = (usb_intr_req_t *)tw->tw_curr_xfer_reqp; ctrl = tw->tw_direction | HC_TD_DT_0 | HC_TD_1I; if (curr_intr_reqp->intr_attributes & USB_ATTRS_SHORT_XFER_OK) { ctrl |= HC_TD_R; } /* Insert another interrupt TD */ (void) ohci_insert_hc_td(ohcip, ctrl, 0, tw->tw_length, 0, pp, tw); /* Start the timer for this Interrupt transfer */ ohci_start_xfer_timer(ohcip, pp, tw); } /* * ohci_stop_periodic_pipe_polling: */ /* ARGSUSED */ static int ohci_stop_periodic_pipe_polling( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph, usb_flags_t flags) { ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; usb_ep_descr_t *eptd = &ph->p_ep; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_stop_periodic_pipe_polling: Flags = 0x%x", flags); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Check and handle stop polling on root hub interrupt pipe. */ if ((ph->p_usba_device->usb_addr == ROOT_HUB_ADDR) && ((eptd->bmAttributes & USB_EP_ATTR_MASK) == USB_EP_ATTR_INTR)) { ohci_handle_root_hub_pipe_stop_intr_polling( ph, flags); return (USB_SUCCESS); } if (pp->pp_state != OHCI_PIPE_STATE_ACTIVE) { USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_stop_periodic_pipe_polling: Polling already stopped"); return (USB_SUCCESS); } /* Set pipe state to pipe stop polling */ pp->pp_state = OHCI_PIPE_STATE_STOP_POLLING; ohci_pipe_cleanup(ohcip, ph); return (USB_SUCCESS); } /* * ohci_allocate_isoc_resources: * * Calculates the number of tds necessary for a intr transfer, and allocates * all the necessary resources. * * Returns NULL if there is insufficient resources otherwise TW. */ static ohci_trans_wrapper_t * ohci_allocate_isoc_resources( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph, usb_isoc_req_t *isoc_reqp, usb_flags_t flags) { ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; int pipe_dir; uint_t max_pkt_size = ph->p_ep.wMaxPacketSize; uint_t max_isoc_xfer_size; usb_isoc_pkt_descr_t *isoc_pkt_descr, *start_isoc_pkt_descr; ushort_t isoc_pkt_count; size_t count, td_count; size_t tw_length; ohci_trans_wrapper_t *tw; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_allocate_isoc_resources: flags = ox%x", flags); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Check whether pipe is in halted state. */ if (pp->pp_state == OHCI_PIPE_STATE_ERROR) { USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_allocate_isoc_resources:" "Pipe is in error state, need pipe reset to continue"); return (NULL); } pipe_dir = ph->p_ep.bEndpointAddress & USB_EP_DIR_MASK; /* Calculate the maximum isochronous transfer size */ max_isoc_xfer_size = OHCI_MAX_ISOC_PKTS_PER_XFER * max_pkt_size; if (isoc_reqp) { isoc_pkt_descr = isoc_reqp->isoc_pkt_descr; isoc_pkt_count = isoc_reqp->isoc_pkts_count; } else { isoc_pkt_descr = ((usb_isoc_req_t *) pp->pp_client_periodic_in_reqp)->isoc_pkt_descr; isoc_pkt_count = ((usb_isoc_req_t *) pp->pp_client_periodic_in_reqp)->isoc_pkts_count; } start_isoc_pkt_descr = isoc_pkt_descr; /* * For isochronous IN pipe, get value of number of isochronous * packets per usb isochronous request */ if (pipe_dir == USB_EP_DIR_IN) { for (count = 0, tw_length = 0; count < isoc_pkt_count; count++) { tw_length += isoc_pkt_descr->isoc_pkt_length; isoc_pkt_descr++; } } else { ASSERT(isoc_reqp != NULL); tw_length = isoc_reqp->isoc_data->b_wptr - isoc_reqp->isoc_data->b_rptr; } USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_allocate_isoc_resources: length = 0x%lx", tw_length); /* Check the size of isochronous request */ if (tw_length > max_isoc_xfer_size) { USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_allocate_isoc_resources: Maximum isoc request" "size 0x%x Given isoc request size 0x%lx", max_isoc_xfer_size, tw_length); return (NULL); } /* * Each isochronous TD can hold data upto eight isochronous * data packets. Calculate the number of isochronous TDs needs * to be insert to complete current isochronous request. */ td_count = isoc_pkt_count / OHCI_ISOC_PKTS_PER_TD; if (isoc_pkt_count % OHCI_ISOC_PKTS_PER_TD) { td_count++; } tw = ohci_create_isoc_transfer_wrapper(ohcip, pp, tw_length, start_isoc_pkt_descr, isoc_pkt_count, td_count, flags); if (tw == NULL) { USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_create_isoc_transfer_wrapper: " "Unable to allocate TW"); return (NULL); } if (ohci_allocate_tds_for_tw(ohcip, tw, td_count) == USB_SUCCESS) { tw->tw_num_tds = td_count; } else { ohci_deallocate_tw_resources(ohcip, pp, tw); return (NULL); } if (pipe_dir == USB_EP_DIR_IN) { if (ohci_allocate_periodic_in_resource(ohcip, pp, tw, flags) != USB_SUCCESS) { ohci_deallocate_tw_resources(ohcip, pp, tw); return (NULL); } tw->tw_direction = HC_TD_IN; } else { if (tw->tw_length) { uchar_t *p; int i; ASSERT(isoc_reqp->isoc_data != NULL); p = isoc_reqp->isoc_data->b_rptr; /* Copy the data into the message */ for (i = 0; i < td_count; i++) { ddi_rep_put8( tw->tw_isoc_bufs[i].mem_handle, p, (uint8_t *)tw->tw_isoc_bufs[i].buf_addr, tw->tw_isoc_bufs[i].length, DDI_DEV_AUTOINCR); p += tw->tw_isoc_bufs[i].length; } } tw->tw_curr_xfer_reqp = (usb_opaque_t)isoc_reqp; tw->tw_direction = HC_TD_OUT; } /* * Initialize the callback and any callback * data required when the td completes. */ tw->tw_handle_td = ohci_handle_isoc_td; tw->tw_handle_callback_value = NULL; return (tw); } /* * ohci_insert_isoc_req: * * Insert an isochronous request into the Host Controller's * isochronous list. If there is an error is will appropriately * deallocate the unused resources. */ static int ohci_insert_isoc_req( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, uint_t flags) { size_t curr_isoc_xfer_offset, curr_isoc_xfer_len; uint_t isoc_pkts, residue, count; uint_t i, ctrl, frame_count; uint_t error = USB_SUCCESS; usb_isoc_req_t *curr_isoc_reqp; usb_isoc_pkt_descr_t *curr_isoc_pkt_descr; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_insert_isoc_req: flags = 0x%x", flags); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Get the current isochronous request and packet * descriptor pointers. */ curr_isoc_reqp = (usb_isoc_req_t *)tw->tw_curr_xfer_reqp; curr_isoc_pkt_descr = curr_isoc_reqp->isoc_pkt_descr; ASSERT(curr_isoc_reqp != NULL); ASSERT(curr_isoc_reqp->isoc_pkt_descr != NULL); /* * Save address of first usb isochronous packet descriptor. */ tw->tw_curr_isoc_pktp = curr_isoc_reqp->isoc_pkt_descr; /* Insert all the isochronous TDs */ for (count = 0, curr_isoc_xfer_offset = 0, isoc_pkts = 0; count < tw->tw_num_tds; count++) { residue = curr_isoc_reqp->isoc_pkts_count - isoc_pkts; /* Check for inserting residue data */ if ((count == (tw->tw_num_tds - 1)) && (residue < OHCI_ISOC_PKTS_PER_TD)) { frame_count = residue; } else { frame_count = OHCI_ISOC_PKTS_PER_TD; } curr_isoc_pkt_descr = tw->tw_curr_isoc_pktp; /* * Calculate length of isochronous transfer * for the current TD. */ for (i = 0, curr_isoc_xfer_len = 0; i < frame_count; i++, curr_isoc_pkt_descr++) { curr_isoc_xfer_len += curr_isoc_pkt_descr->isoc_pkt_length; } /* * Programm td control field by checking whether this * is last td. */ if (count == (tw->tw_num_tds - 1)) { ctrl = ((((frame_count - 1) << HC_ITD_FC_SHIFT) & HC_ITD_FC) | HC_TD_DT_0 | HC_TD_0I); } else { ctrl = ((((frame_count - 1) << HC_ITD_FC_SHIFT) & HC_ITD_FC) | HC_TD_DT_0 | HC_TD_6I); } /* Insert the TD into the endpoint */ if ((error = ohci_insert_hc_td(ohcip, ctrl, count, curr_isoc_xfer_len, 0, pp, tw)) != USB_SUCCESS) { tw->tw_num_tds = count; tw->tw_length = curr_isoc_xfer_offset; break; } isoc_pkts += frame_count; tw->tw_curr_isoc_pktp += frame_count; curr_isoc_xfer_offset += curr_isoc_xfer_len; } if (error != USB_SUCCESS) { /* Free periodic in resources */ if (tw->tw_direction == USB_EP_DIR_IN) { ohci_deallocate_periodic_in_resource(ohcip, pp, tw); } /* Free all resources if IN or if count == 0(for both IN/OUT) */ if (tw->tw_direction == USB_EP_DIR_IN || count == 0) { ohci_deallocate_tw_resources(ohcip, pp, tw); if (pp->pp_cur_periodic_req_cnt) { /* * Set pipe state to stop polling and * error to no resource. Don't insert * any more isochronous polling requests. */ pp->pp_state = OHCI_PIPE_STATE_STOP_POLLING; pp->pp_error = error; } else { /* Set periodic in pipe state to idle */ pp->pp_state = OHCI_PIPE_STATE_IDLE; } } } else { /* * Reset back to the address of first usb isochronous * packet descriptor. */ tw->tw_curr_isoc_pktp = curr_isoc_reqp->isoc_pkt_descr; /* Reset the CONTINUE flag */ pp->pp_flag &= ~OHCI_ISOC_XFER_CONTINUE; } return (error); } /* * ohci_insert_hc_td: * * Insert a Transfer Descriptor (TD) on an Endpoint Descriptor (ED). * Always returns USB_SUCCESS, except for ISOCH. */ static int ohci_insert_hc_td( ohci_state_t *ohcip, uint_t hctd_ctrl, uint32_t hctd_dma_offs, size_t hctd_length, uint32_t hctd_ctrl_phase, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw) { ohci_td_t *new_dummy; ohci_td_t *cpu_current_dummy; ohci_ed_t *ept = pp->pp_ept; int error; ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* Retrieve preallocated td from the TW */ new_dummy = tw->tw_hctd_free_list; ASSERT(new_dummy != NULL); tw->tw_hctd_free_list = ohci_td_iommu_to_cpu(ohcip, Get_TD(new_dummy->hctd_tw_next_td)); Set_TD(new_dummy->hctd_tw_next_td, NULL); /* Fill in the current dummy */ cpu_current_dummy = (ohci_td_t *) (ohci_td_iommu_to_cpu(ohcip, Get_ED(ept->hced_tailp))); /* * Fill in the current dummy td and * add the new dummy to the end. */ ohci_fill_in_td(ohcip, cpu_current_dummy, new_dummy, hctd_ctrl, hctd_dma_offs, hctd_length, hctd_ctrl_phase, pp, tw); /* * If this is an isochronous TD, first write proper * starting usb frame number in which this TD must * can be processed. After writing the frame number * insert this TD into the ED's list. */ if ((pp->pp_pipe_handle->p_ep.bmAttributes & USB_EP_ATTR_MASK) == USB_EP_ATTR_ISOCH) { error = ohci_insert_td_with_frame_number( ohcip, pp, tw, cpu_current_dummy, new_dummy); if (error != USB_SUCCESS) { /* Reset the current dummy back to a dummy */ bzero((char *)cpu_current_dummy, sizeof (ohci_td_t)); Set_TD(cpu_current_dummy->hctd_state, HC_TD_DUMMY); /* return the new dummy back to the free list */ bzero((char *)new_dummy, sizeof (ohci_td_t)); Set_TD(new_dummy->hctd_state, HC_TD_DUMMY); if (tw->tw_hctd_free_list != NULL) { Set_TD(new_dummy->hctd_tw_next_td, ohci_td_cpu_to_iommu(ohcip, tw->tw_hctd_free_list)); } tw->tw_hctd_free_list = new_dummy; return (error); } } else { /* * For control, bulk and interrupt TD, just * add the new dummy to the ED's list. When * this occurs, the Host Controller ill see * the newly filled in dummy TD. */ Set_ED(ept->hced_tailp, (ohci_td_cpu_to_iommu(ohcip, new_dummy))); } /* Insert this td onto the tw */ ohci_insert_td_on_tw(ohcip, tw, cpu_current_dummy); return (USB_SUCCESS); } /* * ohci_allocate_td_from_pool: * * Allocate a Transfer Descriptor (TD) from the TD buffer pool. */ static ohci_td_t * ohci_allocate_td_from_pool(ohci_state_t *ohcip) { int i, state; ohci_td_t *td; ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Search for a blank Transfer Descriptor (TD) * in the TD buffer pool. */ for (i = 0; i < ohci_td_pool_size; i ++) { state = Get_TD(ohcip->ohci_td_pool_addr[i].hctd_state); if (state == HC_TD_FREE) { break; } } if (i >= ohci_td_pool_size) { USB_DPRINTF_L2(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_allocate_td_from_pool: TD exhausted"); return (NULL); } USB_DPRINTF_L4(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_allocate_td_from_pool: Allocated %d", i); /* Create a new dummy for the end of the TD list */ td = &ohcip->ohci_td_pool_addr[i]; USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_allocate_td_from_pool: td 0x%p", (void *)td); /* Mark the newly allocated TD as a dummy */ Set_TD(td->hctd_state, HC_TD_DUMMY); return (td); } /* * ohci_fill_in_td: * * Fill in the fields of a Transfer Descriptor (TD). * * hctd_dma_offs - different meanings for non-isoc and isoc TDs: * starting offset into the TW buffer for a non-isoc TD * and the index into the isoc TD list for an isoc TD. * For non-isoc TDs, the starting offset should be 4k * aligned and the TDs in one transfer must be filled in * increasing order. */ static void ohci_fill_in_td( ohci_state_t *ohcip, ohci_td_t *td, ohci_td_t *new_dummy, uint_t hctd_ctrl, uint32_t hctd_dma_offs, size_t hctd_length, uint32_t hctd_ctrl_phase, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw) { USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_fill_in_td: td 0x%p bufoffs 0x%x len 0x%lx", td, hctd_dma_offs, hctd_length); /* Assert that the td to be filled in is a dummy */ ASSERT(Get_TD(td->hctd_state) == HC_TD_DUMMY); /* Change TD's state Active */ Set_TD(td->hctd_state, HC_TD_ACTIVE); /* Update the TD special fields */ if ((pp->pp_pipe_handle->p_ep.bmAttributes & USB_EP_ATTR_MASK) == USB_EP_ATTR_ISOCH) { ohci_init_itd(ohcip, tw, hctd_ctrl, hctd_dma_offs, td); } else { /* Update the dummy with control information */ Set_TD(td->hctd_ctrl, (hctd_ctrl | HC_TD_CC_NA)); ohci_init_td(ohcip, tw, hctd_dma_offs, hctd_length, td); } /* The current dummy now points to the new dummy */ Set_TD(td->hctd_next_td, (ohci_td_cpu_to_iommu(ohcip, new_dummy))); /* * For Control transfer, hctd_ctrl_phase is a valid field. */ if (hctd_ctrl_phase) { Set_TD(td->hctd_ctrl_phase, hctd_ctrl_phase); } /* Print the td */ ohci_print_td(ohcip, td); /* Fill in the wrapper portion of the TD */ /* Set the transfer wrapper */ ASSERT(tw != NULL); ASSERT(tw->tw_id != NULL); Set_TD(td->hctd_trans_wrapper, (uint32_t)tw->tw_id); Set_TD(td->hctd_tw_next_td, NULL); } /* * ohci_init_td: * * Initialize the buffer address portion of non-isoc Transfer * Descriptor (TD). */ void ohci_init_td( ohci_state_t *ohcip, ohci_trans_wrapper_t *tw, uint32_t hctd_dma_offs, size_t hctd_length, ohci_td_t *td) { uint32_t page_addr, start_addr = 0, end_addr = 0; size_t buf_len = hctd_length; int rem_len, i; /* * TDs must be filled in increasing DMA offset order. * tw_dma_offs is initialized to be 0 at TW creation and * is only increased in this function. */ ASSERT(buf_len == 0 || hctd_dma_offs >= tw->tw_dma_offs); Set_TD(td->hctd_xfer_offs, hctd_dma_offs); Set_TD(td->hctd_xfer_len, buf_len); /* Computing the starting buffer address and end buffer address */ for (i = 0; (i < 2) && (buf_len > 0); i++) { /* Advance to the next DMA cookie if necessary */ if ((tw->tw_dma_offs + tw->tw_cookie.dmac_size) <= hctd_dma_offs) { /* * tw_dma_offs always points to the starting offset * of a cookie */ tw->tw_dma_offs += tw->tw_cookie.dmac_size; ddi_dma_nextcookie(tw->tw_dmahandle, &tw->tw_cookie); tw->tw_cookie_idx++; ASSERT(tw->tw_cookie_idx < tw->tw_ncookies); } ASSERT((tw->tw_dma_offs + tw->tw_cookie.dmac_size) > hctd_dma_offs); /* * Counting the remained buffer length to be filled in * the TD for current DMA cookie */ rem_len = (tw->tw_dma_offs + tw->tw_cookie.dmac_size) - hctd_dma_offs; /* Get the beginning address of the buffer */ page_addr = (hctd_dma_offs - tw->tw_dma_offs) + tw->tw_cookie.dmac_address; ASSERT((page_addr % OHCI_4K_ALIGN) == 0); if (i == 0) { start_addr = page_addr; } USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_init_td: page_addr 0x%p dmac_size " "0x%lx idx %d", page_addr, tw->tw_cookie.dmac_size, tw->tw_cookie_idx); if (buf_len <= OHCI_MAX_TD_BUF_SIZE) { ASSERT(buf_len <= rem_len); end_addr = page_addr + buf_len - 1; buf_len = 0; break; } else { ASSERT(rem_len >= OHCI_MAX_TD_BUF_SIZE); buf_len -= OHCI_MAX_TD_BUF_SIZE; hctd_dma_offs += OHCI_MAX_TD_BUF_SIZE; } } ASSERT(buf_len == 0); Set_TD(td->hctd_cbp, start_addr); Set_TD(td->hctd_buf_end, end_addr); } /* * ohci_init_itd: * * Initialize the buffer address portion of isoc Transfer Descriptor (TD). */ static void ohci_init_itd( ohci_state_t *ohcip, ohci_trans_wrapper_t *tw, uint_t hctd_ctrl, uint32_t index, ohci_td_t *td) { uint32_t start_addr, end_addr, offset, offset_addr; ohci_isoc_buf_t *bufp; size_t buf_len; uint_t buf, fc, toggle, flag; usb_isoc_pkt_descr_t *temp_pkt_descr; int i; ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_init_itd: ctrl = 0x%x", hctd_ctrl); /* * Write control information except starting * usb frame number. */ Set_TD(td->hctd_ctrl, (hctd_ctrl | HC_TD_CC_NA)); bufp = &tw->tw_isoc_bufs[index]; Set_TD(td->hctd_xfer_offs, index); Set_TD(td->hctd_xfer_len, bufp->length); start_addr = bufp->cookie.dmac_address; ASSERT((start_addr % OHCI_4K_ALIGN) == 0); buf_len = bufp->length; if (bufp->ncookies == OHCI_DMA_ATTR_TD_SGLLEN) { buf_len = bufp->length - bufp->cookie.dmac_size; ddi_dma_nextcookie(bufp->dma_handle, &bufp->cookie); } end_addr = bufp->cookie.dmac_address + buf_len - 1; /* * For an isochronous transfer, the hctd_cbp contains, * the 4k page, and not the actual start of the buffer. */ Set_TD(td->hctd_cbp, ((uint32_t)start_addr & HC_ITD_PAGE_MASK)); Set_TD(td->hctd_buf_end, end_addr); fc = (hctd_ctrl & HC_ITD_FC) >> HC_ITD_FC_SHIFT; toggle = 0; buf = start_addr; /* * Get the address of first isochronous data packet * for the current isochronous TD. */ temp_pkt_descr = tw->tw_curr_isoc_pktp; /* The offsets are actually offsets into the page */ for (i = 0; i <= fc; i++) { offset_addr = (uint32_t)((buf & HC_ITD_OFFSET_ADDR) | (HC_TD_CC_NA >> HC_ITD_CC_SHIFT)); flag = ((start_addr & HC_ITD_PAGE_MASK) ^ (buf & HC_ITD_PAGE_MASK)); if (flag) { offset_addr |= HC_ITD_4KBOUNDARY_CROSS; } if (toggle) { offset = (uint32_t)((offset_addr << HC_ITD_OFFSET_SHIFT) & HC_ITD_ODD_OFFSET); Set_TD(td->hctd_offsets[i / 2], Get_TD(td->hctd_offsets[i / 2]) | offset); toggle = 0; } else { offset = (uint32_t)(offset_addr & HC_ITD_EVEN_OFFSET); Set_TD(td->hctd_offsets[i / 2], Get_TD(td->hctd_offsets[i / 2]) | offset); toggle = 1; } buf = (uint32_t)(buf + temp_pkt_descr->isoc_pkt_length); temp_pkt_descr++; } } /* * ohci_insert_td_with_frame_number: * * Insert current isochronous TD into the ED's list. with proper * usb frame number in which this TD can be processed. */ static int ohci_insert_td_with_frame_number( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *current_td, ohci_td_t *dummy_td) { usb_isoc_req_t *isoc_reqp = (usb_isoc_req_t *)tw->tw_curr_xfer_reqp; usb_frame_number_t current_frame_number, start_frame_number; uint_t ddic, ctrl, isoc_pkts; ohci_ed_t *ept = pp->pp_ept; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_insert_td_with_frame_number:" "isoc flags 0x%x", isoc_reqp->isoc_attributes); /* Get the TD ctrl information */ isoc_pkts = ((Get_TD(current_td->hctd_ctrl) & HC_ITD_FC) >> HC_ITD_FC_SHIFT) + 1; /* * Enter critical, while programming the usb frame number * and inserting current isochronous TD into the ED's list. */ ddic = ddi_enter_critical(); /* Get the current frame number */ current_frame_number = ohci_get_current_frame_number(ohcip); /* Check the given isochronous flags */ switch (isoc_reqp->isoc_attributes & (USB_ATTRS_ISOC_START_FRAME | USB_ATTRS_ISOC_XFER_ASAP)) { case USB_ATTRS_ISOC_START_FRAME: /* Starting frame number is specified */ if (pp->pp_flag & OHCI_ISOC_XFER_CONTINUE) { /* Get the starting usb frame number */ start_frame_number = pp->pp_next_frame_number; } else { /* Check for the Starting usb frame number */ if ((isoc_reqp->isoc_frame_no == 0) || ((isoc_reqp->isoc_frame_no + isoc_reqp->isoc_pkts_count) < current_frame_number)) { /* Exit the critical */ ddi_exit_critical(ddic); USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_insert_td_with_frame_number:" "Invalid starting frame number"); return (USB_INVALID_START_FRAME); } /* Get the starting usb frame number */ start_frame_number = isoc_reqp->isoc_frame_no; pp->pp_next_frame_number = 0; } break; case USB_ATTRS_ISOC_XFER_ASAP: /* ohci has to specify starting frame number */ if ((pp->pp_next_frame_number) && (pp->pp_next_frame_number > current_frame_number)) { /* * Get the next usb frame number. */ start_frame_number = pp->pp_next_frame_number; } else { /* * Add appropriate offset to the current usb * frame number and use it as a starting frame * number. */ start_frame_number = current_frame_number + OHCI_FRAME_OFFSET; } if (!(pp->pp_flag & OHCI_ISOC_XFER_CONTINUE)) { isoc_reqp->isoc_frame_no = start_frame_number; } break; default: /* Exit the critical */ ddi_exit_critical(ddic); USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_insert_td_with_frame_number: Either starting " "frame number or ASAP flags are not set, attrs = 0x%x", isoc_reqp->isoc_attributes); return (USB_NO_FRAME_NUMBER); } /* Get the TD ctrl information */ ctrl = Get_TD(current_td->hctd_ctrl) & (~(HC_ITD_SF)); /* Set the frame number field */ Set_TD(current_td->hctd_ctrl, ctrl | (start_frame_number & HC_ITD_SF)); /* * Add the new dummy to the ED's list. When this occurs, * the Host Controller will see newly filled in dummy TD. */ Set_ED(ept->hced_tailp, (ohci_td_cpu_to_iommu(ohcip, dummy_td))); /* Exit the critical */ ddi_exit_critical(ddic); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_insert_td_with_frame_number:" "current frame number 0x%llx start frame number 0x%llx", current_frame_number, start_frame_number); /* * Increment this saved frame number by current number * of data packets needs to be transfer. */ pp->pp_next_frame_number = start_frame_number + isoc_pkts; /* * Set OHCI_ISOC_XFER_CONTINUE flag in order to send other * isochronous packets, part of the current isoch request * in the subsequent frames. */ pp->pp_flag |= OHCI_ISOC_XFER_CONTINUE; return (USB_SUCCESS); } /* * ohci_insert_td_on_tw: * * The transfer wrapper keeps a list of all Transfer Descriptors (TD) that * are allocated for this transfer. Insert a TD onto this list. The list * of TD's does not include the dummy TD that is at the end of the list of * TD's for the endpoint. */ static void ohci_insert_td_on_tw( ohci_state_t *ohcip, ohci_trans_wrapper_t *tw, ohci_td_t *td) { /* * Set the next pointer to NULL because * this is the last TD on list. */ Set_TD(td->hctd_tw_next_td, NULL); if (tw->tw_hctd_head == NULL) { ASSERT(tw->tw_hctd_tail == NULL); tw->tw_hctd_head = td; tw->tw_hctd_tail = td; } else { ohci_td_t *dummy = (ohci_td_t *)tw->tw_hctd_tail; ASSERT(dummy != NULL); ASSERT(dummy != td); ASSERT(Get_TD(td->hctd_state) != HC_TD_DUMMY); /* Add the td to the end of the list */ Set_TD(dummy->hctd_tw_next_td, ohci_td_cpu_to_iommu(ohcip, td)); tw->tw_hctd_tail = td; ASSERT(Get_TD(td->hctd_tw_next_td) == NULL); } } /* * ohci_traverse_tds: * NOTE: This function is also called from POLLED MODE. * * Traverse the list of TD's for an endpoint. Since the endpoint is marked * as sKipped, the Host Controller (HC) is no longer accessing these TD's. * Remove all the TD's that are attached to the endpoint. */ void ohci_traverse_tds( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph) { ohci_trans_wrapper_t *tw; ohci_ed_t *ept; ohci_pipe_private_t *pp; uint32_t addr; ohci_td_t *tailp, *headp, *next; pp = (ohci_pipe_private_t *)ph->p_hcd_private; ept = pp->pp_ept; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_traverse_tds: ph = 0x%p ept = 0x%p", (void *)ph, (void *)ept); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); addr = Get_ED(ept->hced_headp) & (uint32_t)HC_EPT_TD_HEAD; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_traverse_tds: addr (head) = 0x%x", addr); headp = (ohci_td_t *)(ohci_td_iommu_to_cpu(ohcip, addr)); addr = Get_ED(ept->hced_tailp) & (uint32_t)HC_EPT_TD_TAIL; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_traverse_tds: addr (tail) = 0x%x", addr); tailp = (ohci_td_t *)(ohci_td_iommu_to_cpu(ohcip, addr)); USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_traverse_tds: cpu head = 0x%p cpu tail = 0x%p", (void *)headp, (void *)tailp); USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_traverse_tds: iommu head = 0x%x iommu tail = 0x%x", ohci_td_cpu_to_iommu(ohcip, headp), ohci_td_cpu_to_iommu(ohcip, tailp)); /* * Traverse the list of TD's that are currently on the endpoint. * These TD's have not been processed and will not be processed * because the endpoint processing is stopped. */ while (headp != tailp) { next = (ohci_td_t *)(ohci_td_iommu_to_cpu(ohcip, (Get_TD(headp->hctd_next_td) & HC_EPT_TD_TAIL))); tw = (ohci_trans_wrapper_t *)OHCI_LOOKUP_ID( (uint32_t)Get_TD(headp->hctd_trans_wrapper)); /* Stop the the transfer timer */ ohci_stop_xfer_timer(ohcip, tw, OHCI_REMOVE_XFER_ALWAYS); ohci_deallocate_td(ohcip, headp); headp = next; } /* Both head and tail pointers must be same */ USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_traverse_tds: head = 0x%p tail = 0x%p", (void *)headp, (void *)tailp); /* Update the pointer in the endpoint descriptor */ Set_ED(ept->hced_headp, (ohci_td_cpu_to_iommu(ohcip, headp))); USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_traverse_tds: new head = 0x%x", (ohci_td_cpu_to_iommu(ohcip, headp))); USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_traverse_tds: tailp = 0x%x headp = 0x%x", (Get_ED(ept->hced_tailp) & HC_EPT_TD_TAIL), (Get_ED(ept->hced_headp) & HC_EPT_TD_HEAD)); ASSERT((Get_ED(ept->hced_tailp) & HC_EPT_TD_TAIL) == (Get_ED(ept->hced_headp) & HC_EPT_TD_HEAD)); } /* * ohci_done_list_tds: * * There may be TD's on the done list that have not been processed yet. Walk * through these TD's and mark them as RECLAIM. All the mappings for the TD * will be torn down, so the interrupt handle is alerted of this fact through * the RECLAIM flag. */ static void ohci_done_list_tds( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph) { ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; ohci_trans_wrapper_t *head_tw = pp->pp_tw_head; ohci_trans_wrapper_t *next_tw; ohci_td_t *head_td, *next_td; ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_done_list_tds:"); /* Process the transfer wrappers for this pipe */ next_tw = head_tw; while (next_tw) { head_td = (ohci_td_t *)next_tw->tw_hctd_head; next_td = head_td; if (head_td) { /* * Walk through each TD for this transfer * wrapper. If a TD still exists, then it * is currently on the done list. */ while (next_td) { /* To free TD, set TD state to RECLAIM */ Set_TD(next_td->hctd_state, HC_TD_RECLAIM); Set_TD(next_td->hctd_trans_wrapper, NULL); next_td = ohci_td_iommu_to_cpu(ohcip, Get_TD(next_td->hctd_tw_next_td)); } } /* Stop the the transfer timer */ ohci_stop_xfer_timer(ohcip, next_tw, OHCI_REMOVE_XFER_ALWAYS); next_tw = next_tw->tw_next; } } /* * ohci_deallocate_td: * NOTE: This function is also called from POLLED MODE. * * Deallocate a Host Controller's (HC) Transfer Descriptor (TD). */ void ohci_deallocate_td( ohci_state_t *ohcip, ohci_td_t *old_td) { ohci_trans_wrapper_t *tw; USB_DPRINTF_L4(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_deallocate_td: old_td = 0x%p", (void *)old_td); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Obtain the transaction wrapper and tw will be * NULL for the dummy and for the reclaim TD's. */ if ((Get_TD(old_td->hctd_state) == HC_TD_DUMMY) || (Get_TD(old_td->hctd_state) == HC_TD_RECLAIM)) { tw = (ohci_trans_wrapper_t *)((uintptr_t) Get_TD(old_td->hctd_trans_wrapper)); ASSERT(tw == NULL); } else { tw = (ohci_trans_wrapper_t *) OHCI_LOOKUP_ID((uint32_t) Get_TD(old_td->hctd_trans_wrapper)); ASSERT(tw != NULL); } /* * If this TD should be reclaimed, don't try to access its * transfer wrapper. */ if ((Get_TD(old_td->hctd_state) != HC_TD_RECLAIM) && tw) { ohci_td_t *td = (ohci_td_t *)tw->tw_hctd_head; ohci_td_t *test; /* * Take this TD off the transfer wrapper's list since * the pipe is FIFO, this must be the first TD on the * list. */ ASSERT((ohci_td_t *)tw->tw_hctd_head == old_td); tw->tw_hctd_head = ohci_td_iommu_to_cpu(ohcip, Get_TD(td->hctd_tw_next_td)); if (tw->tw_hctd_head) { test = (ohci_td_t *)tw->tw_hctd_head; ASSERT(Get_TD(test->hctd_state) != HC_TD_DUMMY); } /* * If the head becomes NULL, then there are no more * active TD's for this transfer wrapper. Also set * the tail to NULL. */ if (tw->tw_hctd_head == NULL) { tw->tw_hctd_tail = NULL; } else { /* * If this is the last td on the list, make * sure it doesn't point to yet another td. */ if (tw->tw_hctd_head == tw->tw_hctd_tail) { td = (ohci_td_t *)tw->tw_hctd_head; ASSERT(Get_TD(td->hctd_tw_next_td) == NULL); } } } bzero((void *)old_td, sizeof (ohci_td_t)); Set_TD(old_td->hctd_state, HC_TD_FREE); USB_DPRINTF_L3(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_deallocate_td: td 0x%p", (void *)old_td); } /* * ohci_td_cpu_to_iommu: * NOTE: This function is also called from POLLED MODE. * * This function converts for the given Transfer Descriptor (TD) CPU address * to IO address. */ uint32_t ohci_td_cpu_to_iommu( ohci_state_t *ohcip, ohci_td_t *addr) { uint32_t td; td = (uint32_t)ohcip->ohci_td_pool_cookie.dmac_address + (uint32_t)((uintptr_t)addr - (uintptr_t)(ohcip->ohci_td_pool_addr)); ASSERT((ohcip->ohci_td_pool_cookie.dmac_address + (uint32_t) (sizeof (ohci_td_t) * (addr - ohcip->ohci_td_pool_addr))) == (ohcip->ohci_td_pool_cookie.dmac_address + (uint32_t)((uintptr_t)addr - (uintptr_t) (ohcip->ohci_td_pool_addr)))); ASSERT(td >= ohcip->ohci_td_pool_cookie.dmac_address); ASSERT(td <= ohcip->ohci_td_pool_cookie.dmac_address + sizeof (ohci_td_t) * ohci_td_pool_size); return (td); } /* * ohci_td_iommu_to_cpu: * NOTE: This function is also called from POLLED MODE. * * This function converts for the given Transfer Descriptor (TD) IO address * to CPU address. */ ohci_td_t * ohci_td_iommu_to_cpu( ohci_state_t *ohcip, uintptr_t addr) { ohci_td_t *td; if (addr == NULL) { return (NULL); } td = (ohci_td_t *)((uintptr_t) (addr - ohcip->ohci_td_pool_cookie.dmac_address) + (uintptr_t)ohcip->ohci_td_pool_addr); ASSERT(td >= ohcip->ohci_td_pool_addr); ASSERT((uintptr_t)td <= (uintptr_t)ohcip->ohci_td_pool_addr + (uintptr_t)(sizeof (ohci_td_t) * ohci_td_pool_size)); return (td); } /* * ohci_allocate_tds_for_tw: * * Allocate n Transfer Descriptors (TD) from the TD buffer pool and places it * into the TW. * * Returns USB_NO_RESOURCES if it was not able to allocate all the requested TD * otherwise USB_SUCCESS. */ static int ohci_allocate_tds_for_tw( ohci_state_t *ohcip, ohci_trans_wrapper_t *tw, size_t td_count) { ohci_td_t *td; uint32_t td_addr; int i; int error = USB_SUCCESS; for (i = 0; i < td_count; i++) { td = ohci_allocate_td_from_pool(ohcip); if (td == NULL) { error = USB_NO_RESOURCES; USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_allocate_tds_for_tw: " "Unable to allocate %lu TDs", td_count); break; } if (tw->tw_hctd_free_list != NULL) { td_addr = ohci_td_cpu_to_iommu(ohcip, tw->tw_hctd_free_list); Set_TD(td->hctd_tw_next_td, td_addr); } tw->tw_hctd_free_list = td; } return (error); } /* * ohci_allocate_tw_resources: * * Allocate a Transaction Wrapper (TW) and n Transfer Descriptors (TD) * from the TD buffer pool and places it into the TW. It does an all * or nothing transaction. * * Returns NULL if there is insufficient resources otherwise TW. */ static ohci_trans_wrapper_t * ohci_allocate_tw_resources( ohci_state_t *ohcip, ohci_pipe_private_t *pp, size_t tw_length, usb_flags_t usb_flags, size_t td_count) { ohci_trans_wrapper_t *tw; tw = ohci_create_transfer_wrapper(ohcip, pp, tw_length, usb_flags); if (tw == NULL) { USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_allocate_tw_resources: Unable to allocate TW"); } else { if (ohci_allocate_tds_for_tw(ohcip, tw, td_count) == USB_SUCCESS) { tw->tw_num_tds = td_count; } else { ohci_deallocate_tw_resources(ohcip, pp, tw); tw = NULL; } } return (tw); } /* * ohci_free_tw_tds_resources: * * Free all allocated resources for Transaction Wrapper (TW). * Does not free the TW itself. */ static void ohci_free_tw_tds_resources( ohci_state_t *ohcip, ohci_trans_wrapper_t *tw) { ohci_td_t *td; ohci_td_t *temp_td; td = tw->tw_hctd_free_list; while (td != NULL) { /* Save the pointer to the next td before destroying it */ temp_td = ohci_td_iommu_to_cpu(ohcip, Get_TD(td->hctd_tw_next_td)); ohci_deallocate_td(ohcip, td); td = temp_td; } tw->tw_hctd_free_list = NULL; } /* * Transfer Wrapper functions * * ohci_create_transfer_wrapper: * * Create a Transaction Wrapper (TW) for non-isoc transfer types * and this involves the allocating of DMA resources. */ static ohci_trans_wrapper_t * ohci_create_transfer_wrapper( ohci_state_t *ohcip, ohci_pipe_private_t *pp, size_t length, uint_t usb_flags) { ddi_device_acc_attr_t dev_attr; int result; size_t real_length; ohci_trans_wrapper_t *tw; ddi_dma_attr_t dma_attr; int kmem_flag; int (*dmamem_wait)(caddr_t); usba_pipe_handle_data_t *ph = pp->pp_pipe_handle; USB_DPRINTF_L4(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_create_transfer_wrapper: length = 0x%lx flags = 0x%x", length, usb_flags); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* isochronous pipe should not call into this function */ if ((ph->p_ep.bmAttributes & USB_EP_ATTR_MASK) == USB_EP_ATTR_ISOCH) { return (NULL); } /* SLEEP flag should not be used in interrupt context */ if (servicing_interrupt()) { kmem_flag = KM_NOSLEEP; dmamem_wait = DDI_DMA_DONTWAIT; } else { kmem_flag = KM_SLEEP; dmamem_wait = DDI_DMA_SLEEP; } /* Allocate space for the transfer wrapper */ tw = kmem_zalloc(sizeof (ohci_trans_wrapper_t), kmem_flag); if (tw == NULL) { USB_DPRINTF_L2(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_create_transfer_wrapper: kmem_zalloc failed"); return (NULL); } /* allow sg lists for transfer wrapper dma memory */ bcopy(&ohcip->ohci_dma_attr, &dma_attr, sizeof (ddi_dma_attr_t)); dma_attr.dma_attr_sgllen = OHCI_DMA_ATTR_TW_SGLLEN; dma_attr.dma_attr_align = OHCI_DMA_ATTR_ALIGNMENT; /* Allocate the DMA handle */ result = ddi_dma_alloc_handle(ohcip->ohci_dip, &dma_attr, dmamem_wait, 0, &tw->tw_dmahandle); if (result != DDI_SUCCESS) { USB_DPRINTF_L2(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_create_transfer_wrapper: Alloc handle failed"); kmem_free(tw, sizeof (ohci_trans_wrapper_t)); return (NULL); } dev_attr.devacc_attr_version = DDI_DEVICE_ATTR_V0; /* The host controller will be little endian */ dev_attr.devacc_attr_endian_flags = DDI_STRUCTURE_BE_ACC; dev_attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC; /* Allocate the memory */ result = ddi_dma_mem_alloc(tw->tw_dmahandle, length, &dev_attr, DDI_DMA_CONSISTENT, dmamem_wait, NULL, (caddr_t *)&tw->tw_buf, &real_length, &tw->tw_accesshandle); if (result != DDI_SUCCESS) { USB_DPRINTF_L2(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_create_transfer_wrapper: dma_mem_alloc fail"); ddi_dma_free_handle(&tw->tw_dmahandle); kmem_free(tw, sizeof (ohci_trans_wrapper_t)); return (NULL); } ASSERT(real_length >= length); /* Bind the handle */ result = ddi_dma_addr_bind_handle(tw->tw_dmahandle, NULL, (caddr_t)tw->tw_buf, real_length, DDI_DMA_RDWR|DDI_DMA_CONSISTENT, dmamem_wait, NULL, &tw->tw_cookie, &tw->tw_ncookies); if (result != DDI_DMA_MAPPED) { ohci_decode_ddi_dma_addr_bind_handle_result(ohcip, result); ddi_dma_mem_free(&tw->tw_accesshandle); ddi_dma_free_handle(&tw->tw_dmahandle); kmem_free(tw, sizeof (ohci_trans_wrapper_t)); return (NULL); } tw->tw_cookie_idx = 0; tw->tw_dma_offs = 0; /* * Only allow one wrapper to be added at a time. Insert the * new transaction wrapper into the list for this pipe. */ if (pp->pp_tw_head == NULL) { pp->pp_tw_head = tw; pp->pp_tw_tail = tw; } else { pp->pp_tw_tail->tw_next = tw; pp->pp_tw_tail = tw; } /* Store the transfer length */ tw->tw_length = length; /* Store a back pointer to the pipe private structure */ tw->tw_pipe_private = pp; /* Store the transfer type - synchronous or asynchronous */ tw->tw_flags = usb_flags; /* Get and Store 32bit ID */ tw->tw_id = OHCI_GET_ID((void *)tw); ASSERT(tw->tw_id != NULL); USB_DPRINTF_L4(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_create_transfer_wrapper: tw = 0x%p, ncookies = %u", tw, tw->tw_ncookies); return (tw); } /* * Transfer Wrapper functions * * ohci_create_isoc_transfer_wrapper: * * Create a Transaction Wrapper (TW) for isoc transfer * and this involves the allocating of DMA resources. */ static ohci_trans_wrapper_t * ohci_create_isoc_transfer_wrapper( ohci_state_t *ohcip, ohci_pipe_private_t *pp, size_t length, usb_isoc_pkt_descr_t *descr, ushort_t pkt_count, size_t td_count, uint_t usb_flags) { ddi_device_acc_attr_t dev_attr; int result; size_t real_length, xfer_size; uint_t ccount; ohci_trans_wrapper_t *tw; ddi_dma_attr_t dma_attr; int kmem_flag; uint_t i, j, frame_count, residue; int (*dmamem_wait)(caddr_t); usba_pipe_handle_data_t *ph = pp->pp_pipe_handle; usb_isoc_pkt_descr_t *isoc_pkt_descr = descr; USB_DPRINTF_L4(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_create_isoc_transfer_wrapper: length = 0x%lx flags = 0x%x", length, usb_flags); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* non-isochronous pipe should not call into this function */ if ((ph->p_ep.bmAttributes & USB_EP_ATTR_MASK) != USB_EP_ATTR_ISOCH) { return (NULL); } /* SLEEP flag should not be used in interrupt context */ if (servicing_interrupt()) { kmem_flag = KM_NOSLEEP; dmamem_wait = DDI_DMA_DONTWAIT; } else { kmem_flag = KM_SLEEP; dmamem_wait = DDI_DMA_SLEEP; } /* Allocate space for the transfer wrapper */ tw = kmem_zalloc(sizeof (ohci_trans_wrapper_t), kmem_flag); if (tw == NULL) { USB_DPRINTF_L2(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_create_transfer_wrapper: kmem_zalloc failed"); return (NULL); } /* Allocate space for the isoc buffer handles */ tw->tw_isoc_strtlen = sizeof (ohci_isoc_buf_t) * td_count; if ((tw->tw_isoc_bufs = kmem_zalloc(tw->tw_isoc_strtlen, kmem_flag)) == NULL) { USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_create_isoc_transfer_wrapper: kmem_alloc " "isoc buffer failed"); kmem_free(tw, sizeof (ohci_trans_wrapper_t)); return (NULL); } /* allow sg lists for transfer wrapper dma memory */ bcopy(&ohcip->ohci_dma_attr, &dma_attr, sizeof (ddi_dma_attr_t)); dma_attr.dma_attr_sgllen = OHCI_DMA_ATTR_TD_SGLLEN; dma_attr.dma_attr_align = OHCI_DMA_ATTR_ALIGNMENT; dev_attr.devacc_attr_version = DDI_DEVICE_ATTR_V0; /* The host controller will be little endian */ dev_attr.devacc_attr_endian_flags = DDI_STRUCTURE_BE_ACC; dev_attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC; residue = pkt_count % OHCI_ISOC_PKTS_PER_TD; for (i = 0; i < td_count; i++) { tw->tw_isoc_bufs[i].index = i; if ((i == (td_count - 1)) && (residue != 0)) { frame_count = residue; } else { frame_count = OHCI_ISOC_PKTS_PER_TD; } /* Allocate the DMA handle */ result = ddi_dma_alloc_handle(ohcip->ohci_dip, &dma_attr, dmamem_wait, 0, &tw->tw_isoc_bufs[i].dma_handle); if (result != DDI_SUCCESS) { USB_DPRINTF_L2(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_create_isoc_transfer_wrapper: " "Alloc handle failed"); for (j = 0; j < i; j++) { result = ddi_dma_unbind_handle( tw->tw_isoc_bufs[j].dma_handle); ASSERT(result == USB_SUCCESS); ddi_dma_mem_free(&tw->tw_isoc_bufs[j]. mem_handle); ddi_dma_free_handle(&tw->tw_isoc_bufs[j]. dma_handle); } kmem_free(tw->tw_isoc_bufs, tw->tw_isoc_strtlen); kmem_free(tw, sizeof (ohci_trans_wrapper_t)); return (NULL); } /* Compute the memory length */ for (xfer_size = 0, j = 0; j < frame_count; j++) { ASSERT(isoc_pkt_descr != NULL); xfer_size += isoc_pkt_descr->isoc_pkt_length; isoc_pkt_descr++; } /* Allocate the memory */ result = ddi_dma_mem_alloc(tw->tw_isoc_bufs[i].dma_handle, xfer_size, &dev_attr, DDI_DMA_CONSISTENT, dmamem_wait, NULL, (caddr_t *)&tw->tw_isoc_bufs[i].buf_addr, &real_length, &tw->tw_isoc_bufs[i].mem_handle); if (result != DDI_SUCCESS) { USB_DPRINTF_L2(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_create_isoc_transfer_wrapper: " "dma_mem_alloc %d fail", i); ddi_dma_free_handle(&tw->tw_isoc_bufs[i].dma_handle); for (j = 0; j < i; j++) { result = ddi_dma_unbind_handle( tw->tw_isoc_bufs[j].dma_handle); ASSERT(result == USB_SUCCESS); ddi_dma_mem_free(&tw->tw_isoc_bufs[j]. mem_handle); ddi_dma_free_handle(&tw->tw_isoc_bufs[j]. dma_handle); } kmem_free(tw->tw_isoc_bufs, tw->tw_isoc_strtlen); kmem_free(tw, sizeof (ohci_trans_wrapper_t)); return (NULL); } ASSERT(real_length >= xfer_size); /* Bind the handle */ result = ddi_dma_addr_bind_handle( tw->tw_isoc_bufs[i].dma_handle, NULL, (caddr_t)tw->tw_isoc_bufs[i].buf_addr, real_length, DDI_DMA_RDWR|DDI_DMA_CONSISTENT, dmamem_wait, NULL, &tw->tw_isoc_bufs[i].cookie, &ccount); if ((result == DDI_DMA_MAPPED) && (ccount <= OHCI_DMA_ATTR_TD_SGLLEN)) { tw->tw_isoc_bufs[i].length = xfer_size; tw->tw_isoc_bufs[i].ncookies = ccount; continue; } else { USB_DPRINTF_L2(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_create_isoc_transfer_wrapper: " "Bind handle %d failed", i); if (result == DDI_DMA_MAPPED) { result = ddi_dma_unbind_handle( tw->tw_isoc_bufs[i].dma_handle); ASSERT(result == USB_SUCCESS); } ddi_dma_mem_free(&tw->tw_isoc_bufs[i].mem_handle); ddi_dma_free_handle(&tw->tw_isoc_bufs[i].dma_handle); for (j = 0; j < i; j++) { result = ddi_dma_unbind_handle( tw->tw_isoc_bufs[j].dma_handle); ASSERT(result == USB_SUCCESS); ddi_dma_mem_free(&tw->tw_isoc_bufs[j]. mem_handle); ddi_dma_free_handle(&tw->tw_isoc_bufs[j]. dma_handle); } kmem_free(tw->tw_isoc_bufs, tw->tw_isoc_strtlen); kmem_free(tw, sizeof (ohci_trans_wrapper_t)); return (NULL); } } /* * Only allow one wrapper to be added at a time. Insert the * new transaction wrapper into the list for this pipe. */ if (pp->pp_tw_head == NULL) { pp->pp_tw_head = tw; pp->pp_tw_tail = tw; } else { pp->pp_tw_tail->tw_next = tw; pp->pp_tw_tail = tw; } /* Store the transfer length */ tw->tw_length = length; /* Store the td numbers */ tw->tw_ncookies = td_count; /* Store a back pointer to the pipe private structure */ tw->tw_pipe_private = pp; /* Store the transfer type - synchronous or asynchronous */ tw->tw_flags = usb_flags; /* Get and Store 32bit ID */ tw->tw_id = OHCI_GET_ID((void *)tw); ASSERT(tw->tw_id != NULL); USB_DPRINTF_L4(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_create_isoc_transfer_wrapper: tw = 0x%p", tw); return (tw); } /* * ohci_start_xfer_timer: * * Start the timer for the control, bulk and for one time interrupt * transfers. */ /* ARGSUSED */ static void ohci_start_xfer_timer( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw) { USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_start_xfer_timer: tw = 0x%p", tw); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * The timeout handling is done only for control, bulk and for * one time Interrupt transfers. * * NOTE: If timeout is zero; Assume infinite timeout and don't * insert this transfer on the timeout list. */ if (tw->tw_timeout) { /* * Increase timeout value by one second and this extra one * second is used to halt the endpoint if given transfer * times out. */ tw->tw_timeout++; /* * Add this transfer wrapper into the transfer timeout list. */ if (ohcip->ohci_timeout_list) { tw->tw_timeout_next = ohcip->ohci_timeout_list; } ohcip->ohci_timeout_list = tw; ohci_start_timer(ohcip); } } /* * ohci_stop_xfer_timer: * * Start the timer for the control, bulk and for one time interrupt * transfers. */ void ohci_stop_xfer_timer( ohci_state_t *ohcip, ohci_trans_wrapper_t *tw, uint_t flag) { timeout_id_t timer_id; USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_stop_xfer_timer: tw = 0x%p", tw); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * The timeout handling is done only for control, bulk * and for one time Interrupt transfers. */ if (ohcip->ohci_timeout_list == NULL) { return; } switch (flag) { case OHCI_REMOVE_XFER_IFLAST: if (tw->tw_hctd_head != tw->tw_hctd_tail) { break; } /* FALLTHRU */ case OHCI_REMOVE_XFER_ALWAYS: ohci_remove_tw_from_timeout_list(ohcip, tw); if ((ohcip->ohci_timeout_list == NULL) && (ohcip->ohci_timer_id)) { timer_id = ohcip->ohci_timer_id; /* Reset the timer id to zero */ ohcip->ohci_timer_id = 0; mutex_exit(&ohcip->ohci_int_mutex); (void) untimeout(timer_id); mutex_enter(&ohcip->ohci_int_mutex); } break; default: break; } } /* * ohci_xfer_timeout_handler: * * Control or bulk transfer timeout handler. */ static void ohci_xfer_timeout_handler(void *arg) { ohci_state_t *ohcip = (ohci_state_t *)arg; ohci_trans_wrapper_t *exp_xfer_list_head = NULL; ohci_trans_wrapper_t *exp_xfer_list_tail = NULL; ohci_trans_wrapper_t *tw, *next; ohci_td_t *td; usb_flags_t flags; USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_xfer_timeout_handler: ohcip = 0x%p", ohcip); mutex_enter(&ohcip->ohci_int_mutex); /* Set the required flags */ flags = OHCI_FLAGS_NOSLEEP | OHCI_FLAGS_DMA_SYNC; /* * Check whether still timeout handler is valid. */ if (ohcip->ohci_timer_id) { /* Reset the timer id to zero */ ohcip->ohci_timer_id = 0; } else { mutex_exit(&ohcip->ohci_int_mutex); return; } /* Get the transfer timeout list head */ tw = ohcip->ohci_timeout_list; /* * Process ohci timeout list and look whether the timer * has expired for any transfers. Create a temporary list * of expired transfers and process them later. */ while (tw) { /* Get the transfer on the timeout list */ next = tw->tw_timeout_next; tw->tw_timeout--; /* * Set the sKip bit to stop all transactions on * this pipe */ if (tw->tw_timeout == 1) { ohci_modify_sKip_bit(ohcip, tw->tw_pipe_private, SET_sKip, flags); /* Reset dma sync flag */ flags &= ~OHCI_FLAGS_DMA_SYNC; } /* Remove tw from the timeout list */ if (tw->tw_timeout <= 0) { ohci_remove_tw_from_timeout_list(ohcip, tw); /* Add tw to the end of expire list */ if (exp_xfer_list_head) { exp_xfer_list_tail->tw_timeout_next = tw; } else { exp_xfer_list_head = tw; } exp_xfer_list_tail = tw; tw->tw_timeout_next = NULL; } tw = next; } /* Get the expired transfer timeout list head */ tw = exp_xfer_list_head; if (tw && (flags & OHCI_FLAGS_DMA_SYNC)) { /* Sync ED and TD pool */ Sync_ED_TD_Pool(ohcip); } /* * Process the expired transfers by notifing the corrsponding * client driver through the exception callback. */ while (tw) { /* Get the transfer on the expired transfer timeout list */ next = tw->tw_timeout_next; td = tw->tw_hctd_head; while (td) { /* Set TD state to TIMEOUT */ Set_TD(td->hctd_state, HC_TD_TIMEOUT); /* Get the next TD from the wrapper */ td = ohci_td_iommu_to_cpu(ohcip, Get_TD(td->hctd_tw_next_td)); } ohci_handle_error(ohcip, tw->tw_hctd_head, USB_CR_TIMEOUT); tw = next; } ohci_start_timer(ohcip); mutex_exit(&ohcip->ohci_int_mutex); } /* * ohci_remove_tw_from_timeout_list: * * Remove Control or bulk transfer from the timeout list. */ static void ohci_remove_tw_from_timeout_list( ohci_state_t *ohcip, ohci_trans_wrapper_t *tw) { ohci_trans_wrapper_t *prev, *next; USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_remove_tw_from_timeout_list: tw = 0x%p", tw); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); if (ohcip->ohci_timeout_list == tw) { ohcip->ohci_timeout_list = tw->tw_timeout_next; } else { prev = ohcip->ohci_timeout_list; next = prev->tw_timeout_next; while (next && (next != tw)) { prev = next; next = next->tw_timeout_next; } if (next == tw) { prev->tw_timeout_next = next->tw_timeout_next; } } /* Reset the xfer timeout */ tw->tw_timeout_next = NULL; } /* * ohci_start_timer: * * Start the ohci timer */ static void ohci_start_timer(ohci_state_t *ohcip) { USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_start_timer: ohcip = 0x%p", ohcip); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Start the global timer only if currently timer is not * running and if there are any transfers on the timeout * list. This timer will be per USB Host Controller. */ if ((!ohcip->ohci_timer_id) && (ohcip->ohci_timeout_list)) { ohcip->ohci_timer_id = timeout(ohci_xfer_timeout_handler, (void *)ohcip, drv_usectohz(1000000)); } } /* * ohci_deallocate_tw_resources: * NOTE: This function is also called from POLLED MODE. * * Deallocate of a Transaction Wrapper (TW) and this involves the freeing of * of DMA resources. */ void ohci_deallocate_tw_resources( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw) { ohci_trans_wrapper_t *prev, *next; USB_DPRINTF_L4(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_deallocate_tw_resources: tw = 0x%p", tw); /* * If the transfer wrapper has no Host Controller (HC) * Transfer Descriptors (TD) associated with it, then * remove the transfer wrapper. */ if (tw->tw_hctd_head) { ASSERT(tw->tw_hctd_tail != NULL); return; } ASSERT(tw->tw_hctd_tail == NULL); /* Make sure we return all the unused td's to the pool as well */ ohci_free_tw_tds_resources(ohcip, tw); /* * If pp->pp_tw_head and pp->pp_tw_tail are pointing to * given TW then set the head and tail equal to NULL. * Otherwise search for this TW in the linked TW's list * and then remove this TW from the list. */ if (pp->pp_tw_head == tw) { if (pp->pp_tw_tail == tw) { pp->pp_tw_head = NULL; pp->pp_tw_tail = NULL; } else { pp->pp_tw_head = tw->tw_next; } } else { prev = pp->pp_tw_head; next = prev->tw_next; while (next && (next != tw)) { prev = next; next = next->tw_next; } if (next == tw) { prev->tw_next = next->tw_next; if (pp->pp_tw_tail == tw) { pp->pp_tw_tail = prev; } } } ohci_free_tw(ohcip, tw); } /* * ohci_free_dma_resources: * * Free dma resources of a Transfer Wrapper (TW) and also free the TW. */ static void ohci_free_dma_resources( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph) { ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; ohci_trans_wrapper_t *head_tw = pp->pp_tw_head; ohci_trans_wrapper_t *next_tw, *tw; USB_DPRINTF_L4(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_free_dma_resources: ph = 0x%p", (void *)ph); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* Process the Transfer Wrappers */ next_tw = head_tw; while (next_tw) { tw = next_tw; next_tw = tw->tw_next; USB_DPRINTF_L4(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_free_dma_resources: Free TW = 0x%p", (void *)tw); ohci_free_tw(ohcip, tw); } /* Adjust the head and tail pointers */ pp->pp_tw_head = NULL; pp->pp_tw_tail = NULL; } /* * ohci_free_tw: * * Free the Transfer Wrapper (TW). */ static void ohci_free_tw( ohci_state_t *ohcip, ohci_trans_wrapper_t *tw) { int rval, i; USB_DPRINTF_L4(PRINT_MASK_ALLOC, ohcip->ohci_log_hdl, "ohci_free_tw: tw = 0x%p", tw); ASSERT(tw != NULL); ASSERT(tw->tw_id != NULL); /* Free 32bit ID */ OHCI_FREE_ID((uint32_t)tw->tw_id); if (tw->tw_isoc_strtlen > 0) { ASSERT(tw->tw_isoc_bufs != NULL); for (i = 0; i < tw->tw_ncookies; i++) { if (tw->tw_isoc_bufs[i].ncookies > 0) { rval = ddi_dma_unbind_handle( tw->tw_isoc_bufs[i].dma_handle); ASSERT(rval == USB_SUCCESS); } ddi_dma_mem_free(&tw->tw_isoc_bufs[i].mem_handle); ddi_dma_free_handle(&tw->tw_isoc_bufs[i].dma_handle); } kmem_free(tw->tw_isoc_bufs, tw->tw_isoc_strtlen); } else if (tw->tw_dmahandle != NULL) { if (tw->tw_ncookies > 0) { rval = ddi_dma_unbind_handle(tw->tw_dmahandle); ASSERT(rval == DDI_SUCCESS); } ddi_dma_mem_free(&tw->tw_accesshandle); ddi_dma_free_handle(&tw->tw_dmahandle); } /* Free transfer wrapper */ kmem_free(tw, sizeof (ohci_trans_wrapper_t)); } /* * Interrupt Handling functions */ /* * ohci_intr: * * OpenHCI (OHCI) interrupt handling routine. */ static uint_t ohci_intr(caddr_t arg1, caddr_t arg2) { ohci_state_t *ohcip = (ohci_state_t *)arg1; uint_t intr; ohci_td_t *done_head = NULL; ohci_save_intr_sts_t *ohci_intr_sts = &ohcip->ohci_save_intr_sts; USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_intr: Interrupt occurred, arg1 0x%p arg2 0x%p", arg1, arg2); mutex_enter(&ohcip->ohci_int_mutex); /* * Suppose if we switched to the polled mode from the normal * mode when interrupt handler is executing then we need to * save the interrupt status information in the polled mode * to avoid race conditions. The following flag will be set * and reset on entering & exiting of ohci interrupt handler * respectively. This flag will be used in the polled mode * to check whether the interrupt handler was running when we * switched to the polled mode from the normal mode. */ ohci_intr_sts->ohci_intr_flag = OHCI_INTR_HANDLING; /* Temporarily turn off interrupts */ Set_OpReg(hcr_intr_disable, HCR_INTR_MIE); /* * Handle any missed ohci interrupt especially WriteDoneHead * and SOF interrupts because of previous polled mode switch. */ ohci_handle_missed_intr(ohcip); /* * Now process the actual ohci interrupt events that caused * invocation of this ohci interrupt handler. */ /* * Updating the WriteDoneHead interrupt: * * (a) Host Controller * * - First Host controller (HC) checks whether WDH bit * in the interrupt status register is cleared. * * - If WDH bit is cleared then HC writes new done head * list information into the HCCA done head field. * * - Set WDH bit in the interrupt status register. * * (b) Host Controller Driver (HCD) * * - First read the interrupt status register. The HCCA * done head and WDH bit may be set or may not be set * while reading the interrupt status register. * * - Read the HCCA done head list. By this time may be * HC has updated HCCA done head and WDH bit in ohci * interrupt status register. * * - If done head is non-null and if WDH bit is not set * then Host Controller has updated HCCA done head & * WDH bit in the interrupt stats register in between * reading the interrupt status register & HCCA done * head. In that case, definitely WDH bit will be set * in the interrupt status register & driver can take * it for granted. * * Now read the Interrupt Status & Interrupt enable register * to determine the exact interrupt events. */ intr = ohci_intr_sts->ohci_curr_intr_sts = (Get_OpReg(hcr_intr_status) & Get_OpReg(hcr_intr_enable)); if (ohcip->ohci_hccap) { /* Sync HCCA area */ Sync_HCCA(ohcip); /* Read and Save the HCCA DoneHead value */ done_head = ohci_intr_sts->ohci_curr_done_lst = (ohci_td_t *)(uintptr_t) (Get_HCCA(ohcip->ohci_hccap->HccaDoneHead) & HCCA_DONE_HEAD_MASK); USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_intr: Done head! 0x%p", (void *)done_head); } /* Update kstat values */ ohci_do_intrs_stats(ohcip, intr); /* * Look at the HccaDoneHead & if it is non-zero, then a done * list update interrupt is indicated. */ if (done_head) { /* * Check for the WriteDoneHead interrupt bit in the * interrupt condition and set the WriteDoneHead bit * in the interrupt events if it is not set. */ if (!(intr & HCR_INTR_WDH)) { intr |= HCR_INTR_WDH; } } /* * We could have gotten a spurious interrupts. If so, do not * claim it. This is quite possible on some architectures * where more than one PCI slots share the IRQs. If so, the * associated driver's interrupt routine may get called even * if the interrupt is not meant for them. * * By unclaiming the interrupt, the other driver gets chance * to service its interrupt. */ if (!intr) { /* Reset the interrupt handler flag */ ohci_intr_sts->ohci_intr_flag &= ~OHCI_INTR_HANDLING; Set_OpReg(hcr_intr_enable, HCR_INTR_MIE); mutex_exit(&ohcip->ohci_int_mutex); return (DDI_INTR_UNCLAIMED); } USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "Interrupt status 0x%x", intr); /* * Check for Frame Number Overflow. */ if (intr & HCR_INTR_FNO) { USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_intr: Frame Number Overflow"); ohci_handle_frame_number_overflow(ohcip); } if (intr & HCR_INTR_SOF) { USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_intr: Start of Frame"); /* Set ohci_sof_flag indicating SOF interrupt occurred */ ohcip->ohci_sof_flag = B_TRUE; /* Disabel SOF interrupt */ Set_OpReg(hcr_intr_disable, HCR_INTR_SOF); /* * Call cv_broadcast on every SOF interrupt to wakeup * all the threads that are waiting the SOF. Calling * cv_broadcast on every SOF has no effect even if no * threads are waiting for the SOF. */ cv_broadcast(&ohcip->ohci_SOF_cv); } if (intr & HCR_INTR_SO) { USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_intr: Schedule overrun"); ohcip->ohci_so_error++; } if ((intr & HCR_INTR_WDH) && (done_head)) { USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_intr: Done Head"); /* * Currently if we are processing one WriteDoneHead * interrupt and also if we switched to the polled * mode at least once during this time, then there * may be chance that Host Controller generates one * more Write DoneHead or Start of Frame interrupts * for the normal since the polled code clears WDH & * SOF interrupt bits before returning to the normal * mode. Under this condition, we must not clear the * HCCA done head field & also we must not clear WDH * interrupt bit in the interrupt status register. */ if (done_head == (ohci_td_t *)(uintptr_t) (Get_HCCA(ohcip->ohci_hccap->HccaDoneHead) & HCCA_DONE_HEAD_MASK)) { /* Reset the done head to NULL */ Set_HCCA(ohcip->ohci_hccap->HccaDoneHead, NULL); } else { intr &= ~HCR_INTR_WDH; } /* Clear the current done head field */ ohci_intr_sts->ohci_curr_done_lst = NULL; ohci_traverse_done_list(ohcip, done_head); } /* Process endpoint reclaimation list */ if (ohcip->ohci_reclaim_list) { ohci_handle_endpoint_reclaimation(ohcip); } if (intr & HCR_INTR_RD) { USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_intr: Resume Detected"); } if (intr & HCR_INTR_RHSC) { USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_intr: Root hub status change"); } if (intr & HCR_INTR_OC) { USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_intr: Change ownership"); } if (intr & HCR_INTR_UE) { USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_intr: Unrecoverable error"); ohci_handle_ue(ohcip); } /* Acknowledge the interrupt */ Set_OpReg(hcr_intr_status, intr); /* Clear the current interrupt event field */ ohci_intr_sts->ohci_curr_intr_sts = 0; /* * Reset the following flag indicating exiting the interrupt * handler and this flag will be used in the polled mode to * do some extra processing. */ ohci_intr_sts->ohci_intr_flag &= ~OHCI_INTR_HANDLING; Set_OpReg(hcr_intr_enable, HCR_INTR_MIE); /* * Read interrupt status register to make sure that any PIO * store to clear the ISR has made it on the PCI bus before * returning from its interrupt handler. */ (void) Get_OpReg(hcr_intr_status); mutex_exit(&ohcip->ohci_int_mutex); USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "Interrupt handling completed"); return (DDI_INTR_CLAIMED); } /* * ohci_handle_missed_intr: * * Handle any ohci missed interrupts because of polled mode switch. */ static void ohci_handle_missed_intr(ohci_state_t *ohcip) { ohci_save_intr_sts_t *ohci_intr_sts = &ohcip->ohci_save_intr_sts; ohci_td_t *done_head; uint_t intr; ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Check whether we have missed any ohci interrupts because * of the polled mode switch during previous ohci interrupt * handler execution. Only Write Done Head & SOF interrupts * saved in the polled mode. First process these interrupts * before processing actual interrupts that caused invocation * of ohci interrupt handler. */ if (!ohci_intr_sts->ohci_missed_intr_sts) { /* No interrupts are missed, simply return */ return; } USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_missed_intr: Handle ohci missed interrupts"); /* * The functionality and importance of critical code section * in the normal mode ohci interrupt handler & its usage in * the polled mode is explained below. * * (a) Normal mode: * * - Set the flag indicating that processing critical * code in ohci interrupt handler. * * - Process the missed ohci interrupts by copying the * miised interrupt events and done head list fields * information to the critical interrupt event & done * list fields. * * - Reset the missed ohci interrupt events & done head * list fields so that the new missed interrupt event * and done head list information can be saved. * * - All above steps will be executed with in critical * section of the interrupt handler.Then ohci missed * interrupt handler will be called to service missed * ohci interrupts. * * (b) Polled mode: * * - On entering the polled code,it checks for critical * section code execution within the normal mode ohci * interrupt handler. * * - If the critical section code is executing in normal * mode ohci interrupt handler and if copying of ohci * missed interrupt events & done head list fields to * the critical fields is finished then save the "any * missed interrupt events & done head list" because * of current polled mode switch into "critical missed * interrupt events & done list fields" instead actual * missed events and done list fields. * * - Otherwise save "any missed interrupt events & done * list" because of this current polled mode switch * in the actual missed interrupt events & done head * list fields. */ /* * Set flag indicating that interrupt handler is processing * critical interrupt code, so that polled mode code checks * for this condition & will do extra processing as explained * above in order to aviod the race conditions. */ ohci_intr_sts->ohci_intr_flag |= OHCI_INTR_CRITICAL; ohci_intr_sts->ohci_critical_intr_sts |= ohci_intr_sts->ohci_missed_intr_sts; if (ohci_intr_sts->ohci_missed_done_lst) { ohci_intr_sts->ohci_critical_done_lst = ohci_intr_sts->ohci_missed_done_lst; } ohci_intr_sts->ohci_missed_intr_sts = 0; ohci_intr_sts->ohci_missed_done_lst = NULL; ohci_intr_sts->ohci_intr_flag &= ~OHCI_INTR_CRITICAL; intr = ohci_intr_sts->ohci_critical_intr_sts; done_head = ohci_intr_sts->ohci_critical_done_lst; if (intr & HCR_INTR_SOF) { USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_missed_intr: Start of Frame"); /* * Call cv_broadcast on every SOF interrupt to wakeup * all the threads that are waiting the SOF. Calling * cv_broadcast on every SOF has no effect even if no * threads are waiting for the SOF. */ cv_broadcast(&ohcip->ohci_SOF_cv); } if ((intr & HCR_INTR_WDH) && (done_head)) { USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_missed_intr: Done Head"); /* Clear the critical done head field */ ohci_intr_sts->ohci_critical_done_lst = NULL; ohci_traverse_done_list(ohcip, done_head); } /* Clear the critical interrupt event field */ ohci_intr_sts->ohci_critical_intr_sts = 0; } /* * ohci_handle_ue: * * Handling of Unrecoverable Error interrupt (UE). */ static void ohci_handle_ue(ohci_state_t *ohcip) { usb_frame_number_t before_frame_number, after_frame_number; ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_ue: Handling of UE interrupt"); /* * First check whether current UE error occured due to USB or * due to some other subsystem. This can be verified by reading * usb frame numbers before & after a delay of few milliseconds. * If usb frame number read after delay is greater than the one * read before delay, then, USB subsystem is fine. In this case, * disable UE error interrupt and return without shutdowning the * USB subsystem. * * Otherwise, if usb frame number read after delay is less than * or equal to one read before the delay, then, current UE error * occured from USB susbsystem. In this case,go ahead with actual * UE error recovery procedure. * * Get the current usb frame number before waiting for few * milliseconds. */ before_frame_number = ohci_get_current_frame_number(ohcip); /* Wait for few milliseconds */ drv_usecwait(OHCI_TIMEWAIT); /* * Get the current usb frame number after waiting for * milliseconds. */ after_frame_number = ohci_get_current_frame_number(ohcip); USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_ue: Before Frm No 0x%llx After Frm No 0x%llx", before_frame_number, after_frame_number); if (after_frame_number > before_frame_number) { /* Disable UE interrupt */ Set_OpReg(hcr_intr_disable, HCR_INTR_UE); return; } /* * This UE is due to USB hardware error. Reset ohci controller * and reprogram to bring it back to functional state. */ if ((ohci_do_soft_reset(ohcip)) != USB_SUCCESS) { USB_DPRINTF_L0(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "Unrecoverable USB Hardware Error"); /* Disable UE interrupt */ Set_OpReg(hcr_intr_disable, HCR_INTR_UE); /* Set host controller soft state to error */ ohcip->ohci_hc_soft_state = OHCI_CTLR_ERROR_STATE; } } /* * ohci_handle_frame_number_overflow: * * Update software based usb frame number part on every frame number * overflow interrupt. * * NOTE: This function is also called from POLLED MODE. * * Refer ohci spec 1.0a, section 5.3, page 81 for more details. */ void ohci_handle_frame_number_overflow(ohci_state_t *ohcip) { USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_frame_number_overflow:"); ohcip->ohci_fno += (0x10000 - (((Get_HCCA(ohcip->ohci_hccap->HccaFrameNo) & 0xFFFF) ^ ohcip->ohci_fno) & 0x8000)); USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_frame_number_overflow:" "Frame Number Higher Part 0x%llx\n", ohcip->ohci_fno); } /* * ohci_handle_endpoint_reclaimation: * * Reclamation of Host Controller (HC) Endpoint Descriptors (ED). */ static void ohci_handle_endpoint_reclaimation(ohci_state_t *ohcip) { usb_frame_number_t current_frame_number; usb_frame_number_t endpoint_frame_number; ohci_ed_t *reclaim_ed; USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_endpoint_reclaimation:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); current_frame_number = ohci_get_current_frame_number(ohcip); /* * Deallocate all Endpoint Descriptors (ED) which are on the * reclaimation list. These ED's are already removed from the * interrupt lattice tree. */ while (ohcip->ohci_reclaim_list) { reclaim_ed = ohcip->ohci_reclaim_list; endpoint_frame_number = (usb_frame_number_t)(uintptr_t) (OHCI_LOOKUP_ID(Get_ED(reclaim_ed->hced_reclaim_frame))); USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_endpoint_reclaimation:" "current frame number 0x%llx endpoint frame number 0x%llx", current_frame_number, endpoint_frame_number); /* * Deallocate current endpoint only if endpoint's usb frame * number is less than or equal to current usb frame number. * * If endpoint's usb frame number is greater than the current * usb frame number, ignore rest of the endpoints in the list * since rest of the endpoints are inserted into the reclaim * list later than the current reclaim endpoint. */ if (endpoint_frame_number > current_frame_number) { break; } /* Get the next endpoint from the rec. list */ ohcip->ohci_reclaim_list = ohci_ed_iommu_to_cpu(ohcip, Get_ED(reclaim_ed->hced_reclaim_next)); /* Free 32bit ID */ OHCI_FREE_ID((uint32_t)Get_ED(reclaim_ed->hced_reclaim_frame)); /* Deallocate the endpoint */ ohci_deallocate_ed(ohcip, reclaim_ed); } } /* * ohci_traverse_done_list: */ static void ohci_traverse_done_list( ohci_state_t *ohcip, ohci_td_t *head_done_list) { uint_t state; /* TD state */ ohci_td_t *td, *old_td; /* TD pointers */ usb_cr_t error; /* Error from TD */ ohci_trans_wrapper_t *tw = NULL; /* Transfer wrapper */ ohci_pipe_private_t *pp = NULL; /* Pipe private field */ USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_traverse_done_list:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* Sync ED and TD pool */ Sync_ED_TD_Pool(ohcip); /* Reverse the done list */ td = ohci_reverse_done_list(ohcip, head_done_list); /* Traverse the list of transfer descriptors */ while (td) { /* Check for TD state */ state = Get_TD(td->hctd_state); USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_traverse_done_list:\n\t" "td = 0x%p state = 0x%x", (void *)td, state); /* * Obtain the transfer wrapper only if the TD is * not marked as RECLAIM. * * A TD that is marked as RECLAIM has had its DMA * mappings, ED, TD and pipe private structure are * ripped down. Just deallocate this TD. */ if (state != HC_TD_RECLAIM) { tw = (ohci_trans_wrapper_t *)OHCI_LOOKUP_ID( (uint32_t)Get_TD(td->hctd_trans_wrapper)); ASSERT(tw != NULL); pp = tw->tw_pipe_private; USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_traverse_done_list: PP = 0x%p TW = 0x%p", pp, tw); } /* * Don't process the TD if its state is marked as * either RECLAIM or TIMEOUT. * * A TD that is marked as TIMEOUT has already been * processed by TD timeout handler & client driver * has been informed through exception callback. */ if ((state != HC_TD_RECLAIM) && (state != HC_TD_TIMEOUT)) { /* Look at the error status */ error = ohci_parse_error(ohcip, td); if (error == USB_CR_OK) { ohci_handle_normal_td(ohcip, td, tw); } else { /* handle the error condition */ ohci_handle_error(ohcip, td, error); } } else { USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_traverse_done_list: TD State = %d", state); } /* * Save a pointer to the current transfer descriptor */ old_td = td; td = ohci_td_iommu_to_cpu(ohcip, Get_TD(td->hctd_next_td)); /* Deallocate this transfer descriptor */ ohci_deallocate_td(ohcip, old_td); /* * Deallocate the transfer wrapper if there are no more * TD's for the transfer wrapper. ohci_deallocate_tw_resources() * will not deallocate the tw for a periodic endpoint * since it will always have a TD attached to it. * * Do not deallocate the TW if it is a isoc or intr pipe in. * The tw's are reused. * * An TD that is marked as reclaim doesn't have a pipe * or a TW associated with it anymore so don't call this * function. */ if (state != HC_TD_RECLAIM) { ASSERT(tw != NULL); ohci_deallocate_tw_resources(ohcip, pp, tw); } } } /* * ohci_reverse_done_list: * * Reverse the order of the Transfer Descriptor (TD) Done List. */ static ohci_td_t * ohci_reverse_done_list( ohci_state_t *ohcip, ohci_td_t *head_done_list) { ohci_td_t *cpu_new_tail, *cpu_new_head, *cpu_save; USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_reverse_done_list:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); ASSERT(head_done_list != NULL); /* At first, both the tail and head pointers point to the same elem */ cpu_new_tail = cpu_new_head = ohci_td_iommu_to_cpu(ohcip, (uintptr_t)head_done_list); /* See if the list has only one element */ if (Get_TD(cpu_new_head->hctd_next_td) == NULL) { return (cpu_new_head); } /* Advance the head pointer */ cpu_new_head = (ohci_td_t *) ohci_td_iommu_to_cpu(ohcip, Get_TD(cpu_new_head->hctd_next_td)); /* The new tail now points to nothing */ Set_TD(cpu_new_tail->hctd_next_td, NULL); cpu_save = (ohci_td_t *) ohci_td_iommu_to_cpu(ohcip, Get_TD(cpu_new_head->hctd_next_td)); /* Reverse the list and store the pointers as CPU addresses */ while (cpu_save) { Set_TD(cpu_new_head->hctd_next_td, ohci_td_cpu_to_iommu(ohcip, cpu_new_tail)); cpu_new_tail = cpu_new_head; cpu_new_head = cpu_save; cpu_save = (ohci_td_t *) ohci_td_iommu_to_cpu(ohcip, Get_TD(cpu_new_head->hctd_next_td)); } Set_TD(cpu_new_head->hctd_next_td, ohci_td_cpu_to_iommu(ohcip, cpu_new_tail)); return (cpu_new_head); } /* * ohci_parse_error: * * Parse the result for any errors. */ static usb_cr_t ohci_parse_error( ohci_state_t *ohcip, ohci_td_t *td) { uint_t ctrl; usb_ep_descr_t *eptd; ohci_trans_wrapper_t *tw; ohci_pipe_private_t *pp; uint_t flag; usb_cr_t error; USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_parse_error:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); ASSERT(td != NULL); /* Obtain the transfer wrapper from the TD */ tw = (ohci_trans_wrapper_t *) OHCI_LOOKUP_ID((uint32_t)Get_TD(td->hctd_trans_wrapper)); ASSERT(tw != NULL); /* Obtain the pipe private structure */ pp = tw->tw_pipe_private; USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_parse_error: PP 0x%p TW 0x%p", pp, tw); eptd = &pp->pp_pipe_handle->p_ep; ctrl = (uint_t)Get_TD(td->hctd_ctrl) & (uint32_t)HC_TD_CC; /* * Check the condition code of completed TD and report errors * if any. This checking will be done both for the general and * the isochronous TDs. */ if ((error = ohci_check_for_error(ohcip, pp, tw, td, ctrl)) != USB_CR_OK) { flag = OHCI_REMOVE_XFER_ALWAYS; } else { flag = OHCI_REMOVE_XFER_IFLAST; } /* Stop the the transfer timer */ ohci_stop_xfer_timer(ohcip, tw, flag); /* * The isochronous endpoint needs additional error checking * and special processing. */ if ((eptd->bmAttributes & USB_EP_ATTR_MASK) == USB_EP_ATTR_ISOCH) { ohci_parse_isoc_error(ohcip, pp, tw, td); /* always reset error */ error = USB_CR_OK; } return (error); } /* * ohci_parse_isoc_error: * * Check for any errors in the isochronous data packets. Also fillup * the status for each of the isochrnous data packets. */ void ohci_parse_isoc_error( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *td) { usb_isoc_req_t *isoc_reqp; usb_isoc_pkt_descr_t *isoc_pkt_descr; uint_t toggle = 0, fc, ctrl, psw; int i; USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_parse_isoc_error: td 0x%p", td); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); fc = ((uint_t)Get_TD(td->hctd_ctrl) & HC_ITD_FC) >> HC_ITD_FC_SHIFT; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_parse_isoc_error: frame count %d", fc); /* * Get the address of current usb isochronous request * and array of packet descriptors. */ isoc_reqp = (usb_isoc_req_t *)tw->tw_curr_xfer_reqp; isoc_pkt_descr = isoc_reqp->isoc_pkt_descr; for (i = 0; i <= fc; i++) { psw = Get_TD(td->hctd_offsets[i / 2]); if (toggle) { ctrl = psw & HC_ITD_ODD_OFFSET; toggle = 0; } else { ctrl = (psw & HC_ITD_EVEN_OFFSET) << HC_ITD_OFFSET_SHIFT; toggle = 1; } isoc_pkt_descr->isoc_pkt_actual_length = (ctrl >> HC_ITD_OFFSET_SHIFT) & HC_ITD_OFFSET_ADDR; ctrl = (uint_t)(ctrl & (uint32_t)HC_TD_CC); /* Write the status of isoc data packet */ isoc_pkt_descr->isoc_pkt_status = ohci_check_for_error(ohcip, pp, tw, td, ctrl); if (isoc_pkt_descr->isoc_pkt_status) { /* Increment isoc data packet error count */ isoc_reqp->isoc_error_count++; } /* * Get the address of next isoc data packet descriptor. */ isoc_pkt_descr++; } } /* * ohci_check_for_error: * * Check for any errors. */ static usb_cr_t ohci_check_for_error( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *td, uint_t ctrl) { usba_pipe_handle_data_t *ph = pp->pp_pipe_handle; uchar_t ep_attrs = ph->p_ep.bmAttributes; usb_cr_t error = USB_CR_OK; usb_req_attrs_t xfer_attrs; USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_check_for_error: td = 0x%p ctrl = 0x%x", td, ctrl); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); switch (ctrl) { case HC_TD_CC_NO_E: USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_check_for_error: No Error"); error = USB_CR_OK; break; case HC_TD_CC_CRC: USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_check_for_error: CRC error"); error = USB_CR_CRC; break; case HC_TD_CC_BS: USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_check_for_error: Bit stuffing"); error = USB_CR_BITSTUFFING; break; case HC_TD_CC_DTM: USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_check_for_error: Data Toggle Mismatch"); error = USB_CR_DATA_TOGGLE_MM; break; case HC_TD_CC_STALL: USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_check_for_error: Stall"); error = USB_CR_STALL; break; case HC_TD_CC_DNR: USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_check_for_error: Device not responding"); error = USB_CR_DEV_NOT_RESP; break; case HC_TD_CC_PCF: USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_check_for_error: PID check failure"); error = USB_CR_PID_CHECKFAILURE; break; case HC_TD_CC_UPID: USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_check_for_error: Unexpected PID"); error = USB_CR_UNEXP_PID; break; case HC_TD_CC_DO: USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_check_for_error: Data overrrun"); error = USB_CR_DATA_OVERRUN; break; case HC_TD_CC_DU: /* * Check whether short packets are acceptable. * If so don't report error to client drivers * and restart the endpoint. Otherwise report * data underrun error to client driver. */ xfer_attrs = ohci_get_xfer_attrs(ohcip, pp, tw); if (xfer_attrs & USB_ATTRS_SHORT_XFER_OK) { error = USB_CR_OK; if ((ep_attrs & USB_EP_ATTR_MASK) != USB_EP_ATTR_ISOCH) { /* * Cleanup the remaining resources that may have * been allocated for this transfer. */ if (ohci_cleanup_data_underrun(ohcip, pp, tw, td) == USB_SUCCESS) { /* Clear the halt bit */ Set_ED(pp->pp_ept->hced_headp, (Get_ED(pp->pp_ept->hced_headp) & ~HC_EPT_Halt)); } else { error = USB_CR_UNSPECIFIED_ERR; } } } else { USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_check_for_error: Data underrun"); error = USB_CR_DATA_UNDERRUN; } break; case HC_TD_CC_BO: USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_check_for_error: Buffer overrun"); error = USB_CR_BUFFER_OVERRUN; break; case HC_TD_CC_BU: USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_check_for_error: Buffer underrun"); error = USB_CR_BUFFER_UNDERRUN; break; case HC_TD_CC_NA: default: USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_check_for_error: Not accessed"); error = USB_CR_NOT_ACCESSED; break; } if (error) { uint_t hced_ctrl = Get_ED(pp->pp_ept->hced_ctrl); USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_check_for_error: Error %d Device address %d " "Endpoint number %d", error, (hced_ctrl & HC_EPT_FUNC), ((hced_ctrl & HC_EPT_EP) >> HC_EPT_EP_SHFT)); } return (error); } /* * ohci_handle_error: * * Inform USBA about occured transaction errors by calling the USBA callback * routine. */ static void ohci_handle_error( ohci_state_t *ohcip, ohci_td_t *td, usb_cr_t error) { ohci_trans_wrapper_t *tw; usba_pipe_handle_data_t *ph; ohci_pipe_private_t *pp; mblk_t *mp = NULL; size_t length = 0; uchar_t attributes; usb_intr_req_t *curr_intr_reqp; USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_error: error = 0x%x", error); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); ASSERT(td != NULL); /* Print the values in the td */ ohci_print_td(ohcip, td); /* Obtain the transfer wrapper from the TD */ tw = (ohci_trans_wrapper_t *) OHCI_LOOKUP_ID((uint32_t)Get_TD(td->hctd_trans_wrapper)); ASSERT(tw != NULL); /* Obtain the pipe private structure */ pp = tw->tw_pipe_private; ph = tw->tw_pipe_private->pp_pipe_handle; attributes = ph->p_ep.bmAttributes & USB_EP_ATTR_MASK; /* * Special error handling */ if (tw->tw_direction == HC_TD_IN) { switch (attributes) { case USB_EP_ATTR_CONTROL: if (((ph->p_ep.bmAttributes & USB_EP_ATTR_MASK) == USB_EP_ATTR_CONTROL) && (Get_TD(td->hctd_ctrl_phase) == OHCI_CTRL_SETUP_PHASE)) { break; } /* FALLTHROUGH */ case USB_EP_ATTR_BULK: /* * Call ohci_sendup_td_message * to send message to upstream. */ ohci_sendup_td_message(ohcip, pp, tw, td, error); return; case USB_EP_ATTR_INTR: curr_intr_reqp = (usb_intr_req_t *)tw->tw_curr_xfer_reqp; if (curr_intr_reqp->intr_attributes & USB_ATTRS_ONE_XFER) { ohci_handle_one_xfer_completion(ohcip, tw); } /* Decrement periodic in request count */ pp->pp_cur_periodic_req_cnt--; break; case USB_EP_ATTR_ISOCH: default: break; } } else { switch (attributes) { case USB_EP_ATTR_BULK: case USB_EP_ATTR_INTR: /* * If "CurrentBufferPointer" of Transfer * Descriptor (TD) is not equal to zero, * then we sent less data to the device * than requested by client. In that case, * return the mblk after updating the * data->r_ptr. */ if (Get_TD(td->hctd_cbp)) { usb_opaque_t xfer_reqp = tw->tw_curr_xfer_reqp; size_t residue; residue = ohci_get_td_residue(ohcip, td); length = Get_TD(td->hctd_xfer_offs) + Get_TD(td->hctd_xfer_len) - residue; USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_error: requested data %lu " "sent data %lu", tw->tw_length, length); if (attributes == USB_EP_ATTR_BULK) { mp = (mblk_t *)((usb_bulk_req_t *) (xfer_reqp))->bulk_data; } else { mp = (mblk_t *)((usb_intr_req_t *) (xfer_reqp))->intr_data; } /* Increment the read pointer */ mp->b_rptr = mp->b_rptr + length; } break; default: break; } } /* * Callback the client with the * failure reason. */ ohci_hcdi_callback(ph, tw, error); /* Check anybody is waiting for transfers completion event */ ohci_check_for_transfers_completion(ohcip, pp); } /* * ohci_cleanup_data_underrun: * * Cleans up resources when a short xfer occurs */ static int ohci_cleanup_data_underrun( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *td) { ohci_td_t *next_td; ohci_td_t *last_td; ohci_td_t *temp_td; uint32_t last_td_addr; uint_t hced_head; USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_cleanup_data_underrun: td 0x%p, tw 0x%p", td, tw); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); ASSERT(tw->tw_hctd_head == td); /* Check if this TD is the last td in the tw */ last_td = tw->tw_hctd_tail; if (td == last_td) { /* There is no need for cleanup */ return (USB_SUCCESS); } /* * Make sure the ED is halted before we change any td's. * If for some reason it is not halted, return error to client * driver so they can reset the port. */ hced_head = Get_ED(pp->pp_ept->hced_headp); if (!(hced_head & HC_EPT_Halt)) { uint_t hced_ctrl = Get_ED(pp->pp_ept->hced_ctrl); USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_cleanup_data_underrun: Unable to clean up a short " "xfer error. Client might send/receive irrelevant data." " Device address %d Endpoint number %d", (hced_ctrl & HC_EPT_FUNC), ((hced_ctrl & HC_EPT_EP) >> HC_EPT_EP_SHFT)); Set_ED(pp->pp_ept->hced_headp, hced_head | HC_EPT_Halt); return (USB_FAILURE); } /* * Get the address of the first td of the next transfer (tw). * This td, may currently be a dummy td, but when a new request * arrives, it will be transformed into a regular td. */ last_td_addr = Get_TD(last_td->hctd_next_td); /* Set ED head to this last td */ Set_ED(pp->pp_ept->hced_headp, (last_td_addr & HC_EPT_TD_HEAD) | (hced_head & ~HC_EPT_TD_HEAD)); /* * Start removing all the unused TD's from the TW, * but keep the first one. */ tw->tw_hctd_tail = td; /* * Get the last_td, the next td in the tw list. * Afterwards completely disassociate the current td from other tds */ next_td = (ohci_td_t *)ohci_td_iommu_to_cpu(ohcip, Get_TD(td->hctd_tw_next_td)); Set_TD(td->hctd_tw_next_td, NULL); /* * Iterate down the tw list and deallocate them */ while (next_td != NULL) { tw->tw_num_tds--; /* Disassociate this td from it's TW and set to RECLAIM */ Set_TD(next_td->hctd_trans_wrapper, NULL); Set_TD(next_td->hctd_state, HC_TD_RECLAIM); temp_td = next_td; next_td = (ohci_td_t *)ohci_td_iommu_to_cpu(ohcip, Get_TD(next_td->hctd_tw_next_td)); ohci_deallocate_td(ohcip, temp_td); } ASSERT(tw->tw_num_tds == 1); return (USB_SUCCESS); } /* * ohci_handle_normal_td: */ static void ohci_handle_normal_td( ohci_state_t *ohcip, ohci_td_t *td, ohci_trans_wrapper_t *tw) { ohci_pipe_private_t *pp; /* Pipe private field */ USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_normal_td:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); ASSERT(tw != NULL); /* Obtain the pipe private structure */ pp = tw->tw_pipe_private; (*tw->tw_handle_td)(ohcip, pp, tw, td, tw->tw_handle_callback_value); /* Check anybody is waiting for transfers completion event */ ohci_check_for_transfers_completion(ohcip, pp); } /* * ohci_handle_ctrl_td: * * Handle a control Transfer Descriptor (TD). */ /* ARGSUSED */ static void ohci_handle_ctrl_td( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *td, void *tw_handle_callback_value) { usba_pipe_handle_data_t *ph = pp->pp_pipe_handle; USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_ctrl_td: pp = 0x%p tw = 0x%p td = 0x%p state = 0x%x", (void *)pp, (void *)tw, (void *)td, Get_TD(td->hctd_ctrl_phase)); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Check which control transfer phase got completed. */ tw->tw_num_tds--; switch (Get_TD(td->hctd_ctrl_phase)) { case OHCI_CTRL_SETUP_PHASE: USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "Setup complete: pp 0x%p td 0x%p", (void *)pp, (void *)td); break; case OHCI_CTRL_DATA_PHASE: /* * If "CurrentBufferPointer" of Transfer Descriptor (TD) * is not equal to zero, then we received less data from * the device than requested by us. In that case, get the * actual received data size. */ if (Get_TD(td->hctd_cbp)) { size_t length, residue; residue = ohci_get_td_residue(ohcip, td); length = Get_TD(td->hctd_xfer_offs) + Get_TD(td->hctd_xfer_len) - residue; USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_ctrl_qtd: requested data %lu " "received data %lu", tw->tw_length, length); /* Save actual received data length */ tw->tw_length = length; } USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "Data complete: pp 0x%p td 0x%p", (void *)pp, (void *)td); break; case OHCI_CTRL_STATUS_PHASE: if ((tw->tw_length != 0) && (tw->tw_direction == HC_TD_IN)) { /* * Call ohci_sendup_td_message * to send message to upstream. */ ohci_sendup_td_message(ohcip, pp, tw, td, USB_CR_OK); } else { ohci_do_byte_stats(ohcip, tw->tw_length - OHCI_MAX_TD_BUF_SIZE, ph->p_ep.bmAttributes, ph->p_ep.bEndpointAddress); ohci_hcdi_callback(ph, tw, USB_CR_OK); } USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "Status complete: pp 0x%p td 0x%p", (void *)pp, (void *)td); break; } } /* * ohci_handle_bulk_td: * * Handle a bulk Transfer Descriptor (TD). */ /* ARGSUSED */ static void ohci_handle_bulk_td( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *td, void *tw_handle_callback_value) { usba_pipe_handle_data_t *ph = pp->pp_pipe_handle; usb_ep_descr_t *eptd = &ph->p_ep; USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_bulk_td:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Decrement the TDs counter and check whether all the bulk * data has been send or received. If TDs counter reaches * zero then inform client driver about completion current * bulk request. Other wise wait for completion of other bulk * TDs or transactions on this pipe. */ if (--tw->tw_num_tds != 0) { USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_bulk_td: Number of TDs %d", tw->tw_num_tds); return; } /* * If this is a bulk in pipe, return the data to the client. * For a bulk out pipe, there is no need to do anything. */ if ((eptd->bEndpointAddress & USB_EP_DIR_MASK) == USB_EP_DIR_OUT) { USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_bulk_td: Bulk out pipe"); ohci_do_byte_stats(ohcip, tw->tw_length, eptd->bmAttributes, eptd->bEndpointAddress); /* Do the callback */ ohci_hcdi_callback(ph, tw, USB_CR_OK); return; } /* Call ohci_sendup_td_message to send message to upstream */ ohci_sendup_td_message(ohcip, pp, tw, td, USB_CR_OK); } /* * ohci_handle_intr_td: * * Handle a interrupt Transfer Descriptor (TD). */ /* ARGSUSED */ static void ohci_handle_intr_td( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *td, void *tw_handle_callback_value) { usb_intr_req_t *curr_intr_reqp = (usb_intr_req_t *)tw->tw_curr_xfer_reqp; usba_pipe_handle_data_t *ph = pp->pp_pipe_handle; usb_ep_descr_t *eptd = &ph->p_ep; usb_req_attrs_t attrs; int error = USB_SUCCESS; USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_intr_td: pp=0x%p tw=0x%p td=0x%p" "intr_reqp=0%p data=0x%p", pp, tw, td, curr_intr_reqp, curr_intr_reqp->intr_data); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* Get the interrupt xfer attributes */ attrs = curr_intr_reqp->intr_attributes; /* * For a Interrupt OUT pipe, we just callback and we are done */ if ((eptd->bEndpointAddress & USB_EP_DIR_MASK) == USB_EP_DIR_OUT) { USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_intr_td: Intr out pipe, intr_reqp=0x%p," "data=0x%p", curr_intr_reqp, curr_intr_reqp->intr_data); ohci_do_byte_stats(ohcip, tw->tw_length, eptd->bmAttributes, eptd->bEndpointAddress); /* Do the callback */ ohci_hcdi_callback(ph, tw, USB_CR_OK); return; } /* Decrement number of interrupt request count */ pp->pp_cur_periodic_req_cnt--; /* * Check usb flag whether USB_FLAGS_ONE_XFER flag is set * and if so, free duplicate request. */ if (attrs & USB_ATTRS_ONE_XFER) { ohci_handle_one_xfer_completion(ohcip, tw); } /* Call ohci_sendup_td_message to callback into client */ ohci_sendup_td_message(ohcip, pp, tw, td, USB_CR_OK); /* * If interrupt pipe state is still active, insert next Interrupt * request into the Host Controller's Interrupt list. Otherwise * you are done. */ if (pp->pp_state != OHCI_PIPE_STATE_ACTIVE) { return; } if ((error = ohci_allocate_periodic_in_resource(ohcip, pp, tw, 0)) == USB_SUCCESS) { curr_intr_reqp = (usb_intr_req_t *)tw->tw_curr_xfer_reqp; ASSERT(curr_intr_reqp != NULL); tw->tw_num_tds = 1; if (ohci_tw_rebind_cookie(ohcip, pp, tw) != USB_SUCCESS) { ohci_deallocate_periodic_in_resource(ohcip, pp, tw); error = USB_FAILURE; } else if (ohci_allocate_tds_for_tw(ohcip, tw, tw->tw_num_tds) != USB_SUCCESS) { ohci_deallocate_periodic_in_resource(ohcip, pp, tw); error = USB_FAILURE; } } if (error != USB_SUCCESS) { /* * Set pipe state to stop polling and error to no * resource. Don't insert any more interrupt polling * requests. */ pp->pp_state = OHCI_PIPE_STATE_STOP_POLLING; pp->pp_error = USB_CR_NO_RESOURCES; } else { ohci_insert_intr_req(ohcip, pp, tw, 0); /* Increment number of interrupt request count */ pp->pp_cur_periodic_req_cnt++; ASSERT(pp->pp_cur_periodic_req_cnt == pp->pp_max_periodic_req_cnt); } } /* * ohci_handle_one_xfer_completion: */ static void ohci_handle_one_xfer_completion( ohci_state_t *ohcip, ohci_trans_wrapper_t *tw) { usba_pipe_handle_data_t *ph = tw->tw_pipe_private->pp_pipe_handle; ohci_pipe_private_t *pp = tw->tw_pipe_private; usb_intr_req_t *curr_intr_reqp = (usb_intr_req_t *)tw->tw_curr_xfer_reqp; USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_one_xfer_completion: tw = 0x%p", tw); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); ASSERT(curr_intr_reqp->intr_attributes & USB_ATTRS_ONE_XFER); pp->pp_state = OHCI_PIPE_STATE_IDLE; /* * For one xfer, we need to copy back data ptr * and free current request */ ((usb_intr_req_t *)(pp->pp_client_periodic_in_reqp))-> intr_data = ((usb_intr_req_t *) (tw->tw_curr_xfer_reqp))->intr_data; ((usb_intr_req_t *)tw->tw_curr_xfer_reqp)->intr_data = NULL; /* Now free duplicate current request */ usb_free_intr_req((usb_intr_req_t *)tw-> tw_curr_xfer_reqp); mutex_enter(&ph->p_mutex); ph->p_req_count--; mutex_exit(&ph->p_mutex); /* Make client's request the current request */ tw->tw_curr_xfer_reqp = pp->pp_client_periodic_in_reqp; pp->pp_client_periodic_in_reqp = NULL; } /* * ohci_handle_isoc_td: * * Handle an isochronous Transfer Descriptor (TD). */ /* ARGSUSED */ static void ohci_handle_isoc_td( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *td, void *tw_handle_callback_value) { usba_pipe_handle_data_t *ph = pp->pp_pipe_handle; usb_ep_descr_t *eptd = &ph->p_ep; usb_isoc_req_t *curr_isoc_reqp = (usb_isoc_req_t *)tw->tw_curr_xfer_reqp; int error = USB_SUCCESS; USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_isoc_td: pp=0x%p tw=0x%p td=0x%p" "isoc_reqp=0%p data=0x%p", pp, tw, td, curr_isoc_reqp, curr_isoc_reqp->isoc_data); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Decrement the TDs counter and check whether all the isoc * data has been send or received. If TDs counter reaches * zero then inform client driver about completion current * isoc request. Otherwise wait for completion of other isoc * TDs or transactions on this pipe. */ if (--tw->tw_num_tds != 0) { USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_isoc_td: Number of TDs %d", tw->tw_num_tds); return; } /* * If this is a isoc in pipe, return the data to the client. * For a isoc out pipe, there is no need to do anything. */ if ((eptd->bEndpointAddress & USB_EP_DIR_MASK) == USB_EP_DIR_OUT) { USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_handle_isoc_td: Isoc out pipe, isoc_reqp=0x%p," "data=0x%p", curr_isoc_reqp, curr_isoc_reqp->isoc_data); ohci_do_byte_stats(ohcip, tw->tw_length, eptd->bmAttributes, eptd->bEndpointAddress); /* Do the callback */ ohci_hcdi_callback(ph, tw, USB_CR_OK); return; } /* Decrement number of IN isochronous request count */ pp->pp_cur_periodic_req_cnt--; /* Call ohci_sendup_td_message to send message to upstream */ ohci_sendup_td_message(ohcip, pp, tw, td, USB_CR_OK); /* * If isochronous pipe state is still active, insert next isochronous * request into the Host Controller's isochronous list. */ if (pp->pp_state != OHCI_PIPE_STATE_ACTIVE) { return; } if ((error = ohci_allocate_periodic_in_resource(ohcip, pp, tw, 0)) == USB_SUCCESS) { curr_isoc_reqp = (usb_isoc_req_t *)tw->tw_curr_xfer_reqp; ASSERT(curr_isoc_reqp != NULL); tw->tw_num_tds = curr_isoc_reqp->isoc_pkts_count / OHCI_ISOC_PKTS_PER_TD; if (curr_isoc_reqp->isoc_pkts_count % OHCI_ISOC_PKTS_PER_TD) { tw->tw_num_tds++; } if (ohci_tw_rebind_cookie(ohcip, pp, tw) != USB_SUCCESS) { ohci_deallocate_periodic_in_resource(ohcip, pp, tw); error = USB_FAILURE; } else if (ohci_allocate_tds_for_tw(ohcip, tw, tw->tw_num_tds) != USB_SUCCESS) { ohci_deallocate_periodic_in_resource(ohcip, pp, tw); error = USB_FAILURE; } } if (error != USB_SUCCESS || ohci_insert_isoc_req(ohcip, pp, tw, 0) != USB_SUCCESS) { /* * Set pipe state to stop polling and error to no * resource. Don't insert any more isoch polling * requests. */ pp->pp_state = OHCI_PIPE_STATE_STOP_POLLING; pp->pp_error = USB_CR_NO_RESOURCES; } else { /* Increment number of IN isochronous request count */ pp->pp_cur_periodic_req_cnt++; ASSERT(pp->pp_cur_periodic_req_cnt == pp->pp_max_periodic_req_cnt); } } /* * ohci_tw_rebind_cookie: * * If the cookie associated with a DMA buffer has been walked, the cookie * is not usable any longer. To reuse the DMA buffer, the DMA handle needs * to rebind for cookies. */ static int ohci_tw_rebind_cookie( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw) { usb_ep_descr_t *eptd = &pp->pp_pipe_handle->p_ep; int rval, i; uint_t ccount; USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_tw_rebind_cookie:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); if ((eptd->bmAttributes & USB_EP_ATTR_MASK) == USB_EP_ATTR_ISOCH) { ASSERT(tw->tw_num_tds == tw->tw_ncookies); for (i = 0; i < tw->tw_num_tds; i++) { if (tw->tw_isoc_bufs[i].ncookies == 1) { /* * no need to rebind when there is * only one cookie in a buffer */ continue; } /* unbind the DMA handle before rebinding */ rval = ddi_dma_unbind_handle( tw->tw_isoc_bufs[i].dma_handle); ASSERT(rval == USB_SUCCESS); tw->tw_isoc_bufs[i].ncookies = 0; USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "rebind dma_handle %d", i); /* rebind the handle to get cookies */ rval = ddi_dma_addr_bind_handle( tw->tw_isoc_bufs[i].dma_handle, NULL, (caddr_t)tw->tw_isoc_bufs[i].buf_addr, tw->tw_isoc_bufs[i].length, DDI_DMA_RDWR|DDI_DMA_CONSISTENT, DDI_DMA_DONTWAIT, NULL, &tw->tw_isoc_bufs[i].cookie, &ccount); if ((rval == DDI_DMA_MAPPED) && (ccount <= OHCI_DMA_ATTR_TD_SGLLEN)) { tw->tw_isoc_bufs[i].ncookies = ccount; } else { return (USB_NO_RESOURCES); } } } else { if (tw->tw_cookie_idx != 0) { /* unbind the DMA handle before rebinding */ rval = ddi_dma_unbind_handle(tw->tw_dmahandle); ASSERT(rval == DDI_SUCCESS); tw->tw_ncookies = 0; USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "rebind dma_handle"); /* rebind the handle to get cookies */ rval = ddi_dma_addr_bind_handle( tw->tw_dmahandle, NULL, (caddr_t)tw->tw_buf, tw->tw_length, DDI_DMA_RDWR|DDI_DMA_CONSISTENT, DDI_DMA_DONTWAIT, NULL, &tw->tw_cookie, &ccount); if (rval == DDI_DMA_MAPPED) { tw->tw_ncookies = ccount; tw->tw_dma_offs = 0; tw->tw_cookie_idx = 0; } else { return (USB_NO_RESOURCES); } } } return (USB_SUCCESS); } /* * ohci_sendup_td_message: * copy data, if necessary and do callback */ static void ohci_sendup_td_message( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, ohci_td_t *td, usb_cr_t error) { usb_ep_descr_t *eptd = &pp->pp_pipe_handle->p_ep; usba_pipe_handle_data_t *ph = pp->pp_pipe_handle; size_t length = 0, skip_len = 0, residue; mblk_t *mp; uchar_t *buf; usb_opaque_t curr_xfer_reqp = tw->tw_curr_xfer_reqp; ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_sendup_td_message:"); ASSERT(tw != NULL); length = tw->tw_length; switch (eptd->bmAttributes & USB_EP_ATTR_MASK) { case USB_EP_ATTR_CONTROL: /* * Get the correct length, adjust it for the setup size * which is not part of the data length in control end * points. Update tw->tw_length for future references. */ if (((usb_ctrl_req_t *)curr_xfer_reqp)->ctrl_wLength) { tw->tw_length = length = length - OHCI_MAX_TD_BUF_SIZE; } else { tw->tw_length = length = length - SETUP_SIZE; } /* Set the length of the buffer to skip */ skip_len = OHCI_MAX_TD_BUF_SIZE; if (Get_TD(td->hctd_ctrl_phase) != OHCI_CTRL_DATA_PHASE) { break; } /* FALLTHRU */ case USB_EP_ATTR_BULK: case USB_EP_ATTR_INTR: /* * If error is "data overrun", do not check for the * "CurrentBufferPointer" and return whatever data * received to the client driver. */ if (error == USB_CR_DATA_OVERRUN) { break; } /* * If "CurrentBufferPointer" of Transfer Descriptor * (TD) is not equal to zero, then we received less * data from the device than requested by us. In that * case, get the actual received data size. */ if (Get_TD(td->hctd_cbp)) { residue = ohci_get_td_residue(ohcip, td); length = Get_TD(td->hctd_xfer_offs) + Get_TD(td->hctd_xfer_len) - residue - skip_len; USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_sendup_qtd_message: requested data %lu " "received data %lu", tw->tw_length, length); } break; case USB_EP_ATTR_ISOCH: default: break; } /* Copy the data into the mblk_t */ buf = (uchar_t *)tw->tw_buf + skip_len; USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_sendup_qtd_message: length %lu error %d", length, error); /* Get the message block */ switch (eptd->bmAttributes & USB_EP_ATTR_MASK) { case USB_EP_ATTR_CONTROL: mp = ((usb_ctrl_req_t *)curr_xfer_reqp)->ctrl_data; break; case USB_EP_ATTR_BULK: mp = ((usb_bulk_req_t *)curr_xfer_reqp)->bulk_data; break; case USB_EP_ATTR_INTR: mp = ((usb_intr_req_t *)curr_xfer_reqp)->intr_data; break; case USB_EP_ATTR_ISOCH: mp = ((usb_isoc_req_t *)curr_xfer_reqp)->isoc_data; break; } ASSERT(mp != NULL); if (length) { int i; uchar_t *p = mp->b_rptr; /* * Update kstat byte counts * The control endpoints don't have direction bits so in * order for control stats to be counted correctly an in * bit must be faked on a control read. */ if ((eptd->bmAttributes & USB_EP_ATTR_MASK) == USB_EP_ATTR_CONTROL) { ohci_do_byte_stats(ohcip, length, eptd->bmAttributes, USB_EP_DIR_IN); } else { ohci_do_byte_stats(ohcip, length, eptd->bmAttributes, eptd->bEndpointAddress); } if ((eptd->bmAttributes & USB_EP_ATTR_MASK) == USB_EP_ATTR_ISOCH) { for (i = 0; i < tw->tw_ncookies; i++) { Sync_IO_Buffer( tw->tw_isoc_bufs[i].dma_handle, tw->tw_isoc_bufs[i].length); ddi_rep_get8(tw->tw_isoc_bufs[i].mem_handle, p, (uint8_t *)tw->tw_isoc_bufs[i].buf_addr, tw->tw_isoc_bufs[i].length, DDI_DEV_AUTOINCR); p += tw->tw_isoc_bufs[i].length; } } else { /* Sync IO buffer */ Sync_IO_Buffer(tw->tw_dmahandle, (skip_len + length)); /* Copy the data into the message */ ddi_rep_get8(tw->tw_accesshandle, mp->b_rptr, buf, length, DDI_DEV_AUTOINCR); } /* Increment the write pointer */ mp->b_wptr = mp->b_wptr + length; } else { USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_sendup_td_message: Zero length packet"); } ohci_hcdi_callback(ph, tw, error); } /* * ohci_get_td_residue: * * Calculate the bytes not transfered by the TD */ size_t ohci_get_td_residue( ohci_state_t *ohcip, ohci_td_t *td) { uint32_t buf_addr, end_addr; size_t residue; buf_addr = Get_TD(td->hctd_cbp); end_addr = Get_TD(td->hctd_buf_end); if ((buf_addr & 0xfffff000) == (end_addr & 0xfffff000)) { residue = end_addr - buf_addr + 1; } else { residue = OHCI_MAX_TD_BUF_SIZE - (buf_addr & 0x00000fff) + (end_addr & 0x00000fff) + 1; } return (residue); } /* * Miscellaneous functions */ /* * ohci_obtain_state: * NOTE: This function is also called from POLLED MODE. */ ohci_state_t * ohci_obtain_state(dev_info_t *dip) { int instance = ddi_get_instance(dip); ohci_state_t *state = ddi_get_soft_state( ohci_statep, instance); ASSERT(state != NULL); return (state); } /* * ohci_state_is_operational: * * Check the Host controller state and return proper values. */ int ohci_state_is_operational(ohci_state_t *ohcip) { int val; ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); switch (ohcip->ohci_hc_soft_state) { case OHCI_CTLR_INIT_STATE: case OHCI_CTLR_SUSPEND_STATE: val = USB_FAILURE; break; case OHCI_CTLR_OPERATIONAL_STATE: val = USB_SUCCESS; break; case OHCI_CTLR_ERROR_STATE: val = USB_HC_HARDWARE_ERROR; break; default: val = USB_FAILURE; break; } return (val); } /* * ohci_do_soft_reset * * Do soft reset of ohci host controller. */ int ohci_do_soft_reset(ohci_state_t *ohcip) { usb_frame_number_t before_frame_number, after_frame_number; timeout_id_t xfer_timer_id, rh_timer_id; ohci_regs_t *ohci_save_regs; ohci_td_t *done_head; ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* Increment host controller error count */ ohcip->ohci_hc_error++; USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_do_soft_reset:" "Reset ohci host controller 0x%x", ohcip->ohci_hc_error); /* * Allocate space for saving current Host Controller * registers. Don't do any recovery if allocation * fails. */ ohci_save_regs = (ohci_regs_t *) kmem_zalloc(sizeof (ohci_regs_t), KM_NOSLEEP); if (ohci_save_regs == NULL) { USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_do_soft_reset: kmem_zalloc failed"); return (USB_FAILURE); } /* Save current ohci registers */ ohci_save_regs->hcr_control = Get_OpReg(hcr_control); ohci_save_regs->hcr_cmd_status = Get_OpReg(hcr_cmd_status); ohci_save_regs->hcr_intr_enable = Get_OpReg(hcr_intr_enable); ohci_save_regs->hcr_periodic_strt = Get_OpReg(hcr_periodic_strt); ohci_save_regs->hcr_frame_interval = Get_OpReg(hcr_frame_interval); ohci_save_regs->hcr_HCCA = Get_OpReg(hcr_HCCA); ohci_save_regs->hcr_bulk_head = Get_OpReg(hcr_bulk_head); ohci_save_regs->hcr_ctrl_head = Get_OpReg(hcr_ctrl_head); USB_DPRINTF_L4(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_do_soft_reset: Save reg = 0x%p", ohci_save_regs); /* Disable all list processing and interrupts */ Set_OpReg(hcr_control, (Get_OpReg(hcr_control) & ~(HCR_CONTROL_CLE | HCR_CONTROL_BLE | HCR_CONTROL_PLE | HCR_CONTROL_IE))); Set_OpReg(hcr_intr_disable, HCR_INTR_SO | HCR_INTR_WDH | HCR_INTR_RD | HCR_INTR_UE | HCR_INTR_FNO | HCR_INTR_SOF | HCR_INTR_MIE); /* Wait for few milliseconds */ drv_usecwait(OHCI_TIMEWAIT); /* Root hub interrupt pipe timeout id */ rh_timer_id = ohcip->ohci_root_hub.rh_intr_pipe_timer_id; /* Stop the root hub interrupt timer */ if (rh_timer_id) { ohcip->ohci_root_hub.rh_intr_pipe_timer_id = 0; ohcip->ohci_root_hub.rh_intr_pipe_state = OHCI_PIPE_STATE_IDLE; mutex_exit(&ohcip->ohci_int_mutex); (void) untimeout(rh_timer_id); mutex_enter(&ohcip->ohci_int_mutex); } /* Transfer timeout id */ xfer_timer_id = ohcip->ohci_timer_id; /* Stop the global transfer timer */ if (xfer_timer_id) { ohcip->ohci_timer_id = 0; mutex_exit(&ohcip->ohci_int_mutex); (void) untimeout(xfer_timer_id); mutex_enter(&ohcip->ohci_int_mutex); } /* Process any pending HCCA DoneHead */ done_head = (ohci_td_t *)(uintptr_t) (Get_HCCA(ohcip->ohci_hccap->HccaDoneHead) & HCCA_DONE_HEAD_MASK); if (done_head) { /* Reset the done head to NULL */ Set_HCCA(ohcip->ohci_hccap->HccaDoneHead, NULL); ohci_traverse_done_list(ohcip, done_head); } /* Process any pending hcr_done_head value */ if (Get_OpReg(hcr_done_head)) { ohci_traverse_done_list(ohcip, (ohci_td_t *)(uintptr_t)Get_OpReg(hcr_done_head)); } /* Do soft reset of ohci host controller */ Set_OpReg(hcr_cmd_status, HCR_STATUS_RESET); USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_do_soft_reset: Reset in progress"); /* Wait for reset to complete */ drv_usecwait(OHCI_RESET_TIMEWAIT); /* Reset HCCA HcFrameNumber */ Set_HCCA(ohcip->ohci_hccap->HccaFrameNo, 0x00000000); /* * Restore previous saved HC register value * into the current HC registers. */ Set_OpReg(hcr_periodic_strt, (uint32_t) ohci_save_regs->hcr_periodic_strt); Set_OpReg(hcr_frame_interval, (uint32_t) ohci_save_regs->hcr_frame_interval); Set_OpReg(hcr_done_head, 0x0); Set_OpReg(hcr_bulk_curr, 0x0); Set_OpReg(hcr_bulk_head, (uint32_t) ohci_save_regs->hcr_bulk_head); Set_OpReg(hcr_ctrl_curr, 0x0); Set_OpReg(hcr_ctrl_head, (uint32_t) ohci_save_regs->hcr_ctrl_head); Set_OpReg(hcr_periodic_curr, 0x0); Set_OpReg(hcr_HCCA, (uint32_t) ohci_save_regs->hcr_HCCA); Set_OpReg(hcr_intr_status, 0x0); /* * Set HcInterruptEnable to enable all interrupts except * Root Hub Status change interrupt. */ Set_OpReg(hcr_intr_enable, HCR_INTR_SO | HCR_INTR_WDH | HCR_INTR_RD | HCR_INTR_UE | HCR_INTR_FNO | HCR_INTR_SOF | HCR_INTR_MIE); /* Start Control and Bulk list processing */ Set_OpReg(hcr_cmd_status, (HCR_STATUS_CLF | HCR_STATUS_BLF)); /* * Start up Control, Bulk, Periodic and Isochronous lists * processing. */ Set_OpReg(hcr_control, (uint32_t) (ohci_save_regs->hcr_control & (~HCR_CONTROL_HCFS))); /* * Deallocate the space that allocated for saving * HC registers. */ kmem_free((void *) ohci_save_regs, sizeof (ohci_regs_t)); /* Resume the host controller */ Set_OpReg(hcr_control, ((Get_OpReg(hcr_control) & (~HCR_CONTROL_HCFS)) | HCR_CONTROL_RESUME)); /* Wait for resume to complete */ drv_usecwait(OHCI_RESUME_TIMEWAIT); /* Set the Host Controller Functional State to Operational */ Set_OpReg(hcr_control, ((Get_OpReg(hcr_control) & (~HCR_CONTROL_HCFS)) | HCR_CONTROL_OPERAT)); /* Wait 10ms for HC to start sending SOF */ drv_usecwait(OHCI_TIMEWAIT); /* * Get the current usb frame number before waiting for few * milliseconds. */ before_frame_number = ohci_get_current_frame_number(ohcip); /* Wait for few milliseconds */ drv_usecwait(OHCI_TIMEWAIT); /* * Get the current usb frame number after waiting for few * milliseconds. */ after_frame_number = ohci_get_current_frame_number(ohcip); USB_DPRINTF_L3(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_do_soft_reset: Before Frm No 0x%llx After Frm No 0x%llx", before_frame_number, after_frame_number); if (after_frame_number <= before_frame_number) { USB_DPRINTF_L2(PRINT_MASK_INTR, ohcip->ohci_log_hdl, "ohci_do_soft_reset: Soft reset failed"); return (USB_FAILURE); } /* Start the timer for the root hub interrupt pipe polling */ if (rh_timer_id) { ohcip->ohci_root_hub.rh_intr_pipe_timer_id = timeout(ohci_handle_root_hub_status_change, (void *)ohcip, drv_usectohz(OHCI_RH_POLL_TIME)); ohcip->ohci_root_hub. rh_intr_pipe_state = OHCI_PIPE_STATE_ACTIVE; } /* Start the global timer */ if (xfer_timer_id) { ohcip->ohci_timer_id = timeout(ohci_xfer_timeout_handler, (void *)ohcip, drv_usectohz(1000000)); } return (USB_SUCCESS); } /* * ohci_get_current_frame_number: * * Get the current software based usb frame number. */ usb_frame_number_t ohci_get_current_frame_number(ohci_state_t *ohcip) { usb_frame_number_t usb_frame_number; usb_frame_number_t ohci_fno, frame_number; ohci_save_intr_sts_t *ohci_intr_sts = &ohcip->ohci_save_intr_sts; ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Sync HCCA area only if this function * is invoked in non interrupt context. */ if (!(ohci_intr_sts->ohci_intr_flag & OHCI_INTR_HANDLING)) { /* Sync HCCA area */ Sync_HCCA(ohcip); } ohci_fno = ohcip->ohci_fno; frame_number = Get_HCCA(ohcip->ohci_hccap->HccaFrameNo); /* * Calculate current software based usb frame number. * * This code accounts for the fact that frame number is * updated by the Host Controller before the ohci driver * gets an FrameNumberOverflow (FNO) interrupt that will * adjust Frame higher part. * * Refer ohci specification 1.0a, section 5.4, page 86. */ usb_frame_number = ((frame_number & 0x7FFF) | ohci_fno) + (((frame_number & 0xFFFF) ^ ohci_fno) & 0x8000); return (usb_frame_number); } /* * ohci_cpr_cleanup: * * Cleanup ohci state and other ohci specific informations across * Check Point Resume (CPR). */ static void ohci_cpr_cleanup(ohci_state_t *ohcip) { ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* Reset software part of usb frame number */ ohcip->ohci_fno = 0; /* Reset Schedule Overrrun Error Counter */ ohcip->ohci_so_error = 0; /* Reset HCCA HcFrameNumber */ Set_HCCA(ohcip->ohci_hccap->HccaFrameNo, 0x00000000); } /* * ohci_get_xfer_attrs: * * Get the attributes of a particular xfer. */ static usb_req_attrs_t ohci_get_xfer_attrs( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw) { usb_ep_descr_t *eptd = &pp->pp_pipe_handle->p_ep; usb_req_attrs_t attrs = 0; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_get_xfer_attrs:"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); switch (eptd->bmAttributes & USB_EP_ATTR_MASK) { case USB_EP_ATTR_CONTROL: attrs = ((usb_ctrl_req_t *) tw->tw_curr_xfer_reqp)->ctrl_attributes; break; case USB_EP_ATTR_BULK: attrs = ((usb_bulk_req_t *) tw->tw_curr_xfer_reqp)->bulk_attributes; break; case USB_EP_ATTR_INTR: attrs = ((usb_intr_req_t *) tw->tw_curr_xfer_reqp)->intr_attributes; break; case USB_EP_ATTR_ISOCH: attrs = ((usb_isoc_req_t *) tw->tw_curr_xfer_reqp)->isoc_attributes; break; } return (attrs); } /* * ohci_allocate_periodic_in_resource * * Allocate interrupt/isochronous request structure for the * interrupt/isochronous IN transfer. */ static int ohci_allocate_periodic_in_resource( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw, usb_flags_t flags) { usba_pipe_handle_data_t *ph = pp->pp_pipe_handle; uchar_t ep_attr = ph->p_ep.bmAttributes; usb_intr_req_t *curr_intr_reqp; usb_isoc_req_t *curr_isoc_reqp; usb_opaque_t client_periodic_in_reqp; size_t length = 0; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_allocate_periodic_in_resource:" "pp = 0x%p tw = 0x%p flags = 0x%x", pp, tw, flags); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); ASSERT(tw->tw_curr_xfer_reqp == NULL); /* Get the client periodic in request pointer */ client_periodic_in_reqp = pp->pp_client_periodic_in_reqp; /* * If it a periodic IN request and periodic request is NULL, * allocate corresponding usb periodic IN request for the * current periodic polling request and copy the information * from the saved periodic request structure. */ if ((ep_attr & USB_EP_ATTR_MASK) == USB_EP_ATTR_INTR) { if (client_periodic_in_reqp) { /* Get the interrupt transfer length */ length = ((usb_intr_req_t *) client_periodic_in_reqp)->intr_len; curr_intr_reqp = usba_hcdi_dup_intr_req( ph->p_dip, (usb_intr_req_t *) client_periodic_in_reqp, length, flags); } else { curr_intr_reqp = usb_alloc_intr_req( ph->p_dip, length, flags); } if (curr_intr_reqp == NULL) { USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_allocate_periodic_in_resource: Interrupt " "request structure allocation failed"); return (USB_NO_RESOURCES); } if (client_periodic_in_reqp == NULL) { /* For polled mode */ curr_intr_reqp-> intr_attributes = USB_ATTRS_SHORT_XFER_OK; curr_intr_reqp-> intr_len = ph->p_ep.wMaxPacketSize; } else { /* Check and save the timeout value */ tw->tw_timeout = (curr_intr_reqp->intr_attributes & USB_ATTRS_ONE_XFER) ? curr_intr_reqp->intr_timeout: 0; } tw->tw_curr_xfer_reqp = (usb_opaque_t)curr_intr_reqp; tw->tw_length = curr_intr_reqp->intr_len; } else { ASSERT(client_periodic_in_reqp != NULL); curr_isoc_reqp = usba_hcdi_dup_isoc_req(ph->p_dip, (usb_isoc_req_t *)client_periodic_in_reqp, flags); if (curr_isoc_reqp == NULL) { USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_allocate_periodic_in_resource: Isochronous" "request structure allocation failed"); return (USB_NO_RESOURCES); } /* * Save the client's isochronous request pointer and * length of isochronous transfer in transfer wrapper. * The dup'ed request is saved in pp_client_periodic_in_reqp */ tw->tw_curr_xfer_reqp = (usb_opaque_t)pp->pp_client_periodic_in_reqp; pp->pp_client_periodic_in_reqp = (usb_opaque_t)curr_isoc_reqp; tw->tw_length = curr_isoc_reqp->isoc_pkts_length; } mutex_enter(&ph->p_mutex); ph->p_req_count++; mutex_exit(&ph->p_mutex); pp->pp_state = OHCI_PIPE_STATE_ACTIVE; return (USB_SUCCESS); } /* * ohci_wait_for_sof: * * Wait for couple of SOF interrupts */ static int ohci_wait_for_sof(ohci_state_t *ohcip) { usb_frame_number_t before_frame_number, after_frame_number; clock_t sof_time_wait; int rval, sof_wait_count; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_wait_for_sof"); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); rval = ohci_state_is_operational(ohcip); if (rval != USB_SUCCESS) { return (rval); } /* Get the number of clock ticks to wait */ sof_time_wait = drv_usectohz(OHCI_MAX_SOF_TIMEWAIT * 1000000); sof_wait_count = 0; /* * Get the current usb frame number before waiting for the * SOF interrupt event. */ before_frame_number = ohci_get_current_frame_number(ohcip); while (sof_wait_count < MAX_SOF_WAIT_COUNT) { /* Enable the SOF interrupt */ Set_OpReg(hcr_intr_enable, HCR_INTR_SOF); ASSERT(Get_OpReg(hcr_intr_enable) & HCR_INTR_SOF); /* Wait for the SOF or timeout event */ rval = cv_timedwait(&ohcip->ohci_SOF_cv, &ohcip->ohci_int_mutex, ddi_get_lbolt() + sof_time_wait); /* * Get the current usb frame number after woken up either * from SOF interrupt or timer expired event. */ after_frame_number = ohci_get_current_frame_number(ohcip); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_wait_for_sof: before 0x%llx, after 0x%llx", before_frame_number, after_frame_number); /* * Return failure, if we are woken up becuase of timer expired * event and if usb frame number has not been changed. */ if ((rval == -1) && (after_frame_number <= before_frame_number)) { if ((ohci_do_soft_reset(ohcip)) != USB_SUCCESS) { USB_DPRINTF_L0(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "No SOF interrupts"); /* Set host controller soft state to error */ ohcip->ohci_hc_soft_state = OHCI_CTLR_ERROR_STATE; return (USB_FAILURE); } /* Get new usb frame number */ after_frame_number = before_frame_number = ohci_get_current_frame_number(ohcip); } ASSERT(after_frame_number >= before_frame_number); before_frame_number = after_frame_number; sof_wait_count++; } return (USB_SUCCESS); } /* * ohci_pipe_cleanup * * Cleanup ohci pipe. */ static void ohci_pipe_cleanup( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph) { ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; usb_ep_descr_t *eptd = &ph->p_ep; usb_cr_t completion_reason; uint_t pipe_state = pp->pp_state; uint_t bit = 0; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_pipe_cleanup: ph = 0x%p", ph); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); switch (pipe_state) { case OHCI_PIPE_STATE_CLOSE: if (OHCI_NON_PERIODIC_ENDPOINT(eptd)) { bit = ((eptd->bmAttributes & USB_EP_ATTR_MASK) == USB_EP_ATTR_CONTROL) ? HCR_CONTROL_CLE: HCR_CONTROL_BLE; Set_OpReg(hcr_control, (Get_OpReg(hcr_control) & ~(bit))); /* Wait for the next SOF */ (void) ohci_wait_for_sof(ohcip); break; } /* FALLTHROUGH */ case OHCI_PIPE_STATE_RESET: case OHCI_PIPE_STATE_STOP_POLLING: /* * Set the sKip bit to stop all transactions on * this pipe */ ohci_modify_sKip_bit(ohcip, pp, SET_sKip, OHCI_FLAGS_SLEEP | OHCI_FLAGS_DMA_SYNC); break; default: return; } /* * Wait for processing all completed transfers and * to send results to upstream. */ ohci_wait_for_transfers_completion(ohcip, pp); /* Save the data toggle information */ ohci_save_data_toggle(ohcip, ph); /* * Traverse the list of TD's on this endpoint and * these TD's have outstanding transfer requests. * Since the list processing is stopped, these tds * can be deallocated. */ ohci_traverse_tds(ohcip, ph); /* * If all of the endpoint's TD's have been deallocated, * then the DMA mappings can be torn down. If not there * are some TD's on the done list that have not been * processed. Tag these TD's so that they are thrown * away when the done list is processed. */ ohci_done_list_tds(ohcip, ph); /* Do callbacks for all unfinished requests */ ohci_handle_outstanding_requests(ohcip, pp); /* Free DMA resources */ ohci_free_dma_resources(ohcip, ph); switch (pipe_state) { case OHCI_PIPE_STATE_CLOSE: completion_reason = USB_CR_PIPE_CLOSING; break; case OHCI_PIPE_STATE_RESET: case OHCI_PIPE_STATE_STOP_POLLING: /* Set completion reason */ completion_reason = (pipe_state == OHCI_PIPE_STATE_RESET) ? USB_CR_PIPE_RESET: USB_CR_STOPPED_POLLING; /* Restore the data toggle information */ ohci_restore_data_toggle(ohcip, ph); /* * Clear the sKip bit to restart all the * transactions on this pipe. */ ohci_modify_sKip_bit(ohcip, pp, CLEAR_sKip, OHCI_FLAGS_NOSLEEP); /* Set pipe state to idle */ pp->pp_state = OHCI_PIPE_STATE_IDLE; break; } ASSERT((Get_ED(pp->pp_ept->hced_tailp) & HC_EPT_TD_TAIL) == (Get_ED(pp->pp_ept->hced_headp) & HC_EPT_TD_HEAD)); ASSERT((pp->pp_tw_head == NULL) && (pp->pp_tw_tail == NULL)); /* * Do the callback for the original client * periodic IN request. */ if ((OHCI_PERIODIC_ENDPOINT(eptd)) && ((ph->p_ep.bEndpointAddress & USB_EP_DIR_MASK) == USB_EP_DIR_IN)) { ohci_do_client_periodic_in_req_callback( ohcip, pp, completion_reason); } } /* * ohci_wait_for_transfers_completion: * * Wait for processing all completed transfers and to send results * to upstream. */ static void ohci_wait_for_transfers_completion( ohci_state_t *ohcip, ohci_pipe_private_t *pp) { ohci_trans_wrapper_t *head_tw = pp->pp_tw_head; ohci_trans_wrapper_t *next_tw; clock_t xfer_cmpl_time_wait; ohci_td_t *tailp, *headp, *nextp; ohci_td_t *head_td, *next_td; ohci_ed_t *ept = pp->pp_ept; int rval; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_wait_for_transfers_completion: pp = 0x%p", pp); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); headp = (ohci_td_t *)(ohci_td_iommu_to_cpu(ohcip, Get_ED(ept->hced_headp) & (uint32_t)HC_EPT_TD_HEAD)); tailp = (ohci_td_t *)(ohci_td_iommu_to_cpu(ohcip, Get_ED(ept->hced_tailp) & (uint32_t)HC_EPT_TD_TAIL)); rval = ohci_state_is_operational(ohcip); if (rval != USB_SUCCESS) { return; } pp->pp_count_done_tds = 0; /* Process the transfer wrappers for this pipe */ next_tw = head_tw; while (next_tw) { head_td = (ohci_td_t *)next_tw->tw_hctd_head; next_td = head_td; if (head_td) { /* * Walk through each TD for this transfer * wrapper. If a TD still exists, then it * is currently on the done list. */ while (next_td) { nextp = headp; while (nextp != tailp) { /* TD is on the ED */ if (nextp == next_td) { break; } nextp = (ohci_td_t *) (ohci_td_iommu_to_cpu(ohcip, (Get_TD(nextp->hctd_next_td) & HC_EPT_TD_TAIL))); } if (nextp == tailp) { pp->pp_count_done_tds++; } next_td = ohci_td_iommu_to_cpu(ohcip, Get_TD(next_td->hctd_tw_next_td)); } } next_tw = next_tw->tw_next; } USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_wait_for_transfers_completion: count_done_tds = 0x%x", pp->pp_count_done_tds); if (!pp->pp_count_done_tds) { return; } /* Get the number of clock ticks to wait */ xfer_cmpl_time_wait = drv_usectohz(OHCI_XFER_CMPL_TIMEWAIT * 1000000); (void) cv_timedwait(&pp->pp_xfer_cmpl_cv, &ohcip->ohci_int_mutex, ddi_get_lbolt() + xfer_cmpl_time_wait); if (pp->pp_count_done_tds) { USB_DPRINTF_L2(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_wait_for_transfers_completion: No transfers " "completion confirmation received for 0x%x requests", pp->pp_count_done_tds); } } /* * ohci_check_for_transfers_completion: * * Check whether anybody is waiting for transfers completion event. If so, send * this event and also stop initiating any new transfers on this pipe. */ static void ohci_check_for_transfers_completion( ohci_state_t *ohcip, ohci_pipe_private_t *pp) { USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_check_for_transfers_completion: pp = 0x%p", pp); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); if ((pp->pp_state == OHCI_PIPE_STATE_STOP_POLLING) && (pp->pp_error == USB_CR_NO_RESOURCES) && (pp->pp_cur_periodic_req_cnt == 0)) { /* Reset pipe error to zero */ pp->pp_error = 0; /* Do callback for original request */ ohci_do_client_periodic_in_req_callback( ohcip, pp, USB_CR_NO_RESOURCES); } if (pp->pp_count_done_tds) { USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_check_for_transfers_completion:" "count_done_tds = 0x%x", pp->pp_count_done_tds); /* Decrement the done td count */ pp->pp_count_done_tds--; if (!pp->pp_count_done_tds) { USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_check_for_transfers_completion:" "Sent transfers completion event pp = 0x%p", pp); /* Send the transfer completion signal */ cv_signal(&pp->pp_xfer_cmpl_cv); } } } /* * ohci_save_data_toggle: * * Save the data toggle information. */ static void ohci_save_data_toggle( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph) { ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; usb_ep_descr_t *eptd = &ph->p_ep; uint_t data_toggle; usb_cr_t error = pp->pp_error; ohci_ed_t *ed = pp->pp_ept; ohci_td_t *headp, *tailp; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_save_data_toggle: ph = 0x%p", ph); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* Reset the pipe error value */ pp->pp_error = USB_CR_OK; /* Return immediately if it is a control or isoc pipe */ if (((eptd->bmAttributes & USB_EP_ATTR_MASK) == USB_EP_ATTR_CONTROL) || ((eptd->bmAttributes & USB_EP_ATTR_MASK) == USB_EP_ATTR_ISOCH)) { return; } headp = (ohci_td_t *)(ohci_td_iommu_to_cpu(ohcip, Get_ED(ed->hced_headp) & (uint32_t)HC_EPT_TD_HEAD)); tailp = (ohci_td_t *)(ohci_td_iommu_to_cpu(ohcip, Get_ED(ed->hced_tailp) & (uint32_t)HC_EPT_TD_TAIL)); /* * Retrieve the data toggle information either from the endpoint * (ED) or from the transfer descriptor (TD) depending on the * situation. */ if ((Get_ED(ed->hced_headp) & HC_EPT_Halt) || (headp == tailp)) { /* Get the data toggle information from the endpoint */ data_toggle = (Get_ED(ed->hced_headp) & HC_EPT_Carry)? DATA1:DATA0; } else { /* * Retrieve the data toggle information depending on the * master data toggle information saved in the transfer * descriptor (TD) at the head of the endpoint (ED). * * Check for master data toggle information . */ if (Get_TD(headp->hctd_ctrl) & HC_TD_MS_DT) { /* Get the data toggle information from td */ data_toggle = (Get_TD(headp->hctd_ctrl) & HC_TD_DT_1) ? DATA1:DATA0; } else { /* Get the data toggle information from the endpoint */ data_toggle = (Get_ED(ed->hced_headp) & HC_EPT_Carry)? DATA1:DATA0; } } /* * If error is STALL, then, set * data toggle to zero. */ if (error == USB_CR_STALL) { data_toggle = DATA0; } /* * Save the data toggle information * in the usb device structure. */ mutex_enter(&ph->p_mutex); usba_hcdi_set_data_toggle(ph->p_usba_device, ph->p_ep.bEndpointAddress, data_toggle); mutex_exit(&ph->p_mutex); } /* * ohci_restore_data_toggle: * * Restore the data toggle information. */ static void ohci_restore_data_toggle( ohci_state_t *ohcip, usba_pipe_handle_data_t *ph) { ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; usb_ep_descr_t *eptd = &ph->p_ep; uint_t data_toggle = 0; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_restore_data_toggle: ph = 0x%p", ph); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Return immediately if it is a control or isoc pipe. */ if (((eptd->bmAttributes & USB_EP_ATTR_MASK) == USB_EP_ATTR_CONTROL) || ((eptd->bmAttributes & USB_EP_ATTR_MASK) == USB_EP_ATTR_ISOCH)) { return; } mutex_enter(&ph->p_mutex); data_toggle = usba_hcdi_get_data_toggle(ph->p_usba_device, ph->p_ep.bEndpointAddress); usba_hcdi_set_data_toggle(ph->p_usba_device, ph->p_ep.bEndpointAddress, 0); mutex_exit(&ph->p_mutex); /* * Restore the data toggle bit depending on the * previous data toggle information. */ if (data_toggle) { Set_ED(pp->pp_ept->hced_headp, Get_ED(pp->pp_ept->hced_headp) | HC_EPT_Carry); } else { Set_ED(pp->pp_ept->hced_headp, Get_ED(pp->pp_ept->hced_headp) & (~HC_EPT_Carry)); } } /* * ohci_handle_outstanding_requests * NOTE: This function is also called from POLLED MODE. * * Deallocate interrupt/isochronous request structure for the * interrupt/isochronous IN transfer. Do the callbacks for all * unfinished requests. */ void ohci_handle_outstanding_requests( ohci_state_t *ohcip, ohci_pipe_private_t *pp) { usba_pipe_handle_data_t *ph = pp->pp_pipe_handle; usb_ep_descr_t *eptd = &ph->p_ep; ohci_trans_wrapper_t *curr_tw; ohci_trans_wrapper_t *next_tw; usb_opaque_t curr_xfer_reqp; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_handle_outstanding_requests: pp = 0x%p", pp); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Deallocate all the pre-allocated interrupt requests */ next_tw = pp->pp_tw_head; while (next_tw) { curr_tw = next_tw; next_tw = curr_tw->tw_next; curr_xfer_reqp = curr_tw->tw_curr_xfer_reqp; /* Deallocate current interrupt request */ if (curr_xfer_reqp) { if ((OHCI_PERIODIC_ENDPOINT(eptd)) && (curr_tw->tw_direction == HC_TD_IN)) { /* Decrement periodic in request count */ pp->pp_cur_periodic_req_cnt--; ohci_deallocate_periodic_in_resource( ohcip, pp, curr_tw); } else { ohci_hcdi_callback(ph, curr_tw, USB_CR_FLUSHED); } } } } /* * ohci_deallocate_periodic_in_resource * * Deallocate interrupt/isochronous request structure for the * interrupt/isochronous IN transfer. */ static void ohci_deallocate_periodic_in_resource( ohci_state_t *ohcip, ohci_pipe_private_t *pp, ohci_trans_wrapper_t *tw) { usba_pipe_handle_data_t *ph = pp->pp_pipe_handle; uchar_t ep_attr = ph->p_ep.bmAttributes; usb_opaque_t curr_xfer_reqp; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_deallocate_periodic_in_resource: " "pp = 0x%p tw = 0x%p", pp, tw); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); curr_xfer_reqp = tw->tw_curr_xfer_reqp; /* Check the current periodic in request pointer */ if (curr_xfer_reqp) { /* * Reset periodic in request usb isoch * packet request pointers to null. */ tw->tw_curr_xfer_reqp = NULL; tw->tw_curr_isoc_pktp = NULL; mutex_enter(&ph->p_mutex); ph->p_req_count--; mutex_exit(&ph->p_mutex); /* * Free pre-allocated interrupt * or isochronous requests. */ switch (ep_attr & USB_EP_ATTR_MASK) { case USB_EP_ATTR_INTR: usb_free_intr_req( (usb_intr_req_t *)curr_xfer_reqp); break; case USB_EP_ATTR_ISOCH: usb_free_isoc_req( (usb_isoc_req_t *)curr_xfer_reqp); break; } } } /* * ohci_do_client_periodic_in_req_callback * * Do callback for the original client periodic IN request. */ static void ohci_do_client_periodic_in_req_callback( ohci_state_t *ohcip, ohci_pipe_private_t *pp, usb_cr_t completion_reason) { usba_pipe_handle_data_t *ph = pp->pp_pipe_handle; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_do_client_periodic_in_req_callback: " "pp = 0x%p cc = 0x%x", pp, completion_reason); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* * Check for Interrupt/Isochronous IN, whether we need to do * callback for the original client's periodic IN request. */ if (pp->pp_client_periodic_in_reqp) { ASSERT(pp->pp_cur_periodic_req_cnt == 0); ohci_hcdi_callback(ph, NULL, completion_reason); } } /* * ohci_hcdi_callback() * * Convenience wrapper around usba_hcdi_cb() other than root hub. */ static void ohci_hcdi_callback( usba_pipe_handle_data_t *ph, ohci_trans_wrapper_t *tw, usb_cr_t completion_reason) { ohci_state_t *ohcip = ohci_obtain_state( ph->p_usba_device->usb_root_hub_dip); uchar_t attributes = ph->p_ep.bmAttributes & USB_EP_ATTR_MASK; ohci_pipe_private_t *pp = (ohci_pipe_private_t *)ph->p_hcd_private; usb_opaque_t curr_xfer_reqp; uint_t pipe_state = 0; USB_DPRINTF_L4(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_hcdi_callback: ph = 0x%p, tw = 0x%p, cr = 0x%x", ph, tw, completion_reason); ASSERT(mutex_owned(&ohcip->ohci_int_mutex)); /* Set the pipe state as per completion reason */ switch (completion_reason) { case USB_CR_OK: pipe_state = pp->pp_state; break; case USB_CR_NO_RESOURCES: case USB_CR_NOT_SUPPORTED: case USB_CR_STOPPED_POLLING: case USB_CR_PIPE_RESET: pipe_state = OHCI_PIPE_STATE_IDLE; break; case USB_CR_PIPE_CLOSING: break; default: /* * Set the pipe state to error * except for the isoc pipe. */ if (attributes != USB_EP_ATTR_ISOCH) { pipe_state = OHCI_PIPE_STATE_ERROR; pp->pp_error = completion_reason; } break; } pp->pp_state = pipe_state; if (tw && tw->tw_curr_xfer_reqp) { curr_xfer_reqp = tw->tw_curr_xfer_reqp; tw->tw_curr_xfer_reqp = NULL; tw->tw_curr_isoc_pktp = NULL; } else { ASSERT(pp->pp_client_periodic_in_reqp != NULL); curr_xfer_reqp = pp->pp_client_periodic_in_reqp; pp->pp_client_periodic_in_reqp = NULL; } ASSERT(curr_xfer_reqp != NULL); mutex_exit(&ohcip->ohci_int_mutex); usba_hcdi_cb(ph, curr_xfer_reqp, completion_reason); mutex_enter(&ohcip->ohci_int_mutex); } /* * ohci kstat functions */ /* * ohci_create_stats: * * Allocate and initialize the ohci kstat structures */ static void ohci_create_stats(ohci_state_t *ohcip) { char kstatname[KSTAT_STRLEN]; const char *dname = ddi_driver_name(ohcip->ohci_dip); char *usbtypes[USB_N_COUNT_KSTATS] = {"ctrl", "isoch", "bulk", "intr"}; uint_t instance = ohcip->ohci_instance; ohci_intrs_stats_t *isp; int i; if (OHCI_INTRS_STATS(ohcip) == NULL) { (void) snprintf(kstatname, KSTAT_STRLEN, "%s%d,intrs", dname, instance); OHCI_INTRS_STATS(ohcip) = kstat_create("usba", instance, kstatname, "usb_interrupts", KSTAT_TYPE_NAMED, sizeof (ohci_intrs_stats_t) / sizeof (kstat_named_t), KSTAT_FLAG_PERSISTENT); if (OHCI_INTRS_STATS(ohcip)) { isp = OHCI_INTRS_STATS_DATA(ohcip); kstat_named_init(&isp->ohci_hcr_intr_total, "Interrupts Total", KSTAT_DATA_UINT64); kstat_named_init(&isp->ohci_hcr_intr_not_claimed, "Not Claimed", KSTAT_DATA_UINT64); kstat_named_init(&isp->ohci_hcr_intr_so, "Schedule Overruns", KSTAT_DATA_UINT64); kstat_named_init(&isp->ohci_hcr_intr_wdh, "Writeback Done Head", KSTAT_DATA_UINT64); kstat_named_init(&isp->ohci_hcr_intr_sof, "Start Of Frame", KSTAT_DATA_UINT64); kstat_named_init(&isp->ohci_hcr_intr_rd, "Resume Detected", KSTAT_DATA_UINT64); kstat_named_init(&isp->ohci_hcr_intr_ue, "Unrecoverable Error", KSTAT_DATA_UINT64); kstat_named_init(&isp->ohci_hcr_intr_fno, "Frame No. Overflow", KSTAT_DATA_UINT64); kstat_named_init(&isp->ohci_hcr_intr_rhsc, "Root Hub Status Change", KSTAT_DATA_UINT64); kstat_named_init(&isp->ohci_hcr_intr_oc, "Change In Ownership", KSTAT_DATA_UINT64); OHCI_INTRS_STATS(ohcip)->ks_private = ohcip; OHCI_INTRS_STATS(ohcip)->ks_update = nulldev; kstat_install(OHCI_INTRS_STATS(ohcip)); } } if (OHCI_TOTAL_STATS(ohcip) == NULL) { (void) snprintf(kstatname, KSTAT_STRLEN, "%s%d,total", dname, instance); OHCI_TOTAL_STATS(ohcip) = kstat_create("usba", instance, kstatname, "usb_byte_count", KSTAT_TYPE_IO, 1, KSTAT_FLAG_PERSISTENT); if (OHCI_TOTAL_STATS(ohcip)) { kstat_install(OHCI_TOTAL_STATS(ohcip)); } } for (i = 0; i < USB_N_COUNT_KSTATS; i++) { if (ohcip->ohci_count_stats[i] == NULL) { (void) snprintf(kstatname, KSTAT_STRLEN, "%s%d,%s", dname, instance, usbtypes[i]); ohcip->ohci_count_stats[i] = kstat_create("usba", instance, kstatname, "usb_byte_count", KSTAT_TYPE_IO, 1, KSTAT_FLAG_PERSISTENT); if (ohcip->ohci_count_stats[i]) { kstat_install(ohcip->ohci_count_stats[i]); } } } } /* * ohci_destroy_stats: * * Clean up ohci kstat structures */ static void ohci_destroy_stats(ohci_state_t *ohcip) { int i; if (OHCI_INTRS_STATS(ohcip)) { kstat_delete(OHCI_INTRS_STATS(ohcip)); OHCI_INTRS_STATS(ohcip) = NULL; } if (OHCI_TOTAL_STATS(ohcip)) { kstat_delete(OHCI_TOTAL_STATS(ohcip)); OHCI_TOTAL_STATS(ohcip) = NULL; } for (i = 0; i < USB_N_COUNT_KSTATS; i++) { if (ohcip->ohci_count_stats[i]) { kstat_delete(ohcip->ohci_count_stats[i]); ohcip->ohci_count_stats[i] = NULL; } } } /* * ohci_do_intrs_stats: * * ohci status information */ static void ohci_do_intrs_stats( ohci_state_t *ohcip, int val) { if (OHCI_INTRS_STATS(ohcip)) { OHCI_INTRS_STATS_DATA(ohcip)->ohci_hcr_intr_total.value.ui64++; switch (val) { case HCR_INTR_SO: OHCI_INTRS_STATS_DATA(ohcip)-> ohci_hcr_intr_so.value.ui64++; break; case HCR_INTR_WDH: OHCI_INTRS_STATS_DATA(ohcip)-> ohci_hcr_intr_wdh.value.ui64++; break; case HCR_INTR_SOF: OHCI_INTRS_STATS_DATA(ohcip)-> ohci_hcr_intr_sof.value.ui64++; break; case HCR_INTR_RD: OHCI_INTRS_STATS_DATA(ohcip)-> ohci_hcr_intr_rd.value.ui64++; break; case HCR_INTR_UE: OHCI_INTRS_STATS_DATA(ohcip)-> ohci_hcr_intr_ue.value.ui64++; break; case HCR_INTR_FNO: OHCI_INTRS_STATS_DATA(ohcip)-> ohci_hcr_intr_fno.value.ui64++; break; case HCR_INTR_RHSC: OHCI_INTRS_STATS_DATA(ohcip)-> ohci_hcr_intr_rhsc.value.ui64++; break; case HCR_INTR_OC: OHCI_INTRS_STATS_DATA(ohcip)-> ohci_hcr_intr_oc.value.ui64++; break; default: OHCI_INTRS_STATS_DATA(ohcip)-> ohci_hcr_intr_not_claimed.value.ui64++; break; } } } /* * ohci_do_byte_stats: * * ohci data xfer information */ static void ohci_do_byte_stats( ohci_state_t *ohcip, size_t len, uint8_t attr, uint8_t addr) { uint8_t type = attr & USB_EP_ATTR_MASK; uint8_t dir = addr & USB_EP_DIR_MASK; if (dir == USB_EP_DIR_IN) { OHCI_TOTAL_STATS_DATA(ohcip)->reads++; OHCI_TOTAL_STATS_DATA(ohcip)->nread += len; switch (type) { case USB_EP_ATTR_CONTROL: OHCI_CTRL_STATS(ohcip)->reads++; OHCI_CTRL_STATS(ohcip)->nread += len; break; case USB_EP_ATTR_BULK: OHCI_BULK_STATS(ohcip)->reads++; OHCI_BULK_STATS(ohcip)->nread += len; break; case USB_EP_ATTR_INTR: OHCI_INTR_STATS(ohcip)->reads++; OHCI_INTR_STATS(ohcip)->nread += len; break; case USB_EP_ATTR_ISOCH: OHCI_ISOC_STATS(ohcip)->reads++; OHCI_ISOC_STATS(ohcip)->nread += len; break; } } else if (dir == USB_EP_DIR_OUT) { OHCI_TOTAL_STATS_DATA(ohcip)->writes++; OHCI_TOTAL_STATS_DATA(ohcip)->nwritten += len; switch (type) { case USB_EP_ATTR_CONTROL: OHCI_CTRL_STATS(ohcip)->writes++; OHCI_CTRL_STATS(ohcip)->nwritten += len; break; case USB_EP_ATTR_BULK: OHCI_BULK_STATS(ohcip)->writes++; OHCI_BULK_STATS(ohcip)->nwritten += len; break; case USB_EP_ATTR_INTR: OHCI_INTR_STATS(ohcip)->writes++; OHCI_INTR_STATS(ohcip)->nwritten += len; break; case USB_EP_ATTR_ISOCH: OHCI_ISOC_STATS(ohcip)->writes++; OHCI_ISOC_STATS(ohcip)->nwritten += len; break; } } } /* * ohci_print_op_regs: * * Print Host Controller's (HC) Operational registers. */ static void ohci_print_op_regs(ohci_state_t *ohcip) { uint_t i; USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "\n\tOHCI%d Operational Registers\n", ddi_get_instance(ohcip->ohci_dip)); USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "\thcr_revision: 0x%x \t\thcr_control: 0x%x", Get_OpReg(hcr_revision), Get_OpReg(hcr_control)); USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "\thcr_cmd_status: 0x%x \t\thcr_intr_enable: 0x%x", Get_OpReg(hcr_cmd_status), Get_OpReg(hcr_intr_enable)); USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "\thcr_intr_disable: 0x%x \thcr_HCCA: 0x%x", Get_OpReg(hcr_intr_disable), Get_OpReg(hcr_HCCA)); USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "\thcr_periodic_curr: 0x%x \t\thcr_ctrl_head: 0x%x", Get_OpReg(hcr_periodic_curr), Get_OpReg(hcr_ctrl_head)); USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "\thcr_ctrl_curr: 0x%x \t\thcr_bulk_head: 0x%x", Get_OpReg(hcr_ctrl_curr), Get_OpReg(hcr_bulk_head)); USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "\thcr_bulk_curr: 0x%x \t\thcr_done_head: 0x%x", Get_OpReg(hcr_bulk_curr), Get_OpReg(hcr_done_head)); USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "\thcr_frame_interval: 0x%x " "\thcr_frame_remaining: 0x%x", Get_OpReg(hcr_frame_interval), Get_OpReg(hcr_frame_remaining)); USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "\thcr_frame_number: 0x%x \thcr_periodic_strt: 0x%x", Get_OpReg(hcr_frame_number), Get_OpReg(hcr_periodic_strt)); USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "\thcr_transfer_ls: 0x%x \t\thcr_rh_descriptorA: 0x%x", Get_OpReg(hcr_transfer_ls), Get_OpReg(hcr_rh_descriptorA)); USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "\thcr_rh_descriptorB: 0x%x \thcr_rh_status: 0x%x", Get_OpReg(hcr_rh_descriptorB), Get_OpReg(hcr_rh_status)); USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "\tRoot hub port status"); for (i = 0; i < (Get_OpReg(hcr_rh_descriptorA) & HCR_RHA_NDP); i++) { USB_DPRINTF_L3(PRINT_MASK_ATTA, ohcip->ohci_log_hdl, "\thcr_rh_portstatus 0x%x: 0x%x ", i, Get_OpReg(hcr_rh_portstatus[i])); } } /* * ohci_print_ed: */ static void ohci_print_ed( ohci_state_t *ohcip, ohci_ed_t *ed) { uint_t ctrl = Get_ED(ed->hced_ctrl); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_print_ed: ed = 0x%p", (void *)ed); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\thced_ctrl: 0x%x %s", ctrl, ((Get_ED(ed->hced_headp) & HC_EPT_Halt) ? "halted": "")); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\ttoggle carry: 0x%x", Get_ED(ed->hced_headp) & HC_EPT_Carry); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\tctrl: 0x%x", Get_ED(ed->hced_ctrl)); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\ttailp: 0x%x", Get_ED(ed->hced_tailp)); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\theadp: 0x%x", Get_ED(ed->hced_headp)); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\tnext: 0x%x", Get_ED(ed->hced_next)); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\tprev: 0x%x", Get_ED(ed->hced_prev)); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\tnode: 0x%x", Get_ED(ed->hced_node)); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\treclaim_next: 0x%x", Get_ED(ed->hced_reclaim_next)); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\treclaim_frame: 0x%x", Get_ED(ed->hced_reclaim_frame)); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\tstate: 0x%x", Get_ED(ed->hced_state)); } /* * ohci_print_td: */ static void ohci_print_td( ohci_state_t *ohcip, ohci_td_t *td) { uint_t i; uint_t ctrl = Get_TD(td->hctd_ctrl); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "ohci_print_td: td = 0x%p", (void *)td); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\tPID: 0x%x ", ctrl & HC_TD_PID); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\tDelay Intr: 0x%x ", ctrl & HC_TD_DI); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\tData Toggle: 0x%x ", ctrl & HC_TD_DT); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\tError Count: 0x%x ", ctrl & HC_TD_EC); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\tctrl: 0x%x ", Get_TD(td->hctd_ctrl)); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\tcbp: 0x%x ", Get_TD(td->hctd_cbp)); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\tnext_td: 0x%x ", Get_TD(td->hctd_next_td)); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\tbuf_end: 0x%x ", Get_TD(td->hctd_buf_end)); for (i = 0; i < 4; i++) { USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\toffset[%d]: 0x%x ", i, Get_TD(td->hctd_offsets[i])); } USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\ttrans_wrapper: 0x%x ", Get_TD(td->hctd_trans_wrapper)); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\tstate: 0x%x ", Get_TD(td->hctd_state)); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\ttw_next_td: 0x%x ", Get_TD(td->hctd_tw_next_td)); USB_DPRINTF_L3(PRINT_MASK_LISTS, ohcip->ohci_log_hdl, "\tctrl_phase: 0x%x ", Get_TD(td->hctd_ctrl_phase)); }