/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * generic scsi device watch */ #if DEBUG || lint #define SWDEBUG #endif /* * debug goodies */ #ifdef SWDEBUG static int swdebug = 0; #define DEBUGGING ((scsi_options & SCSI_DEBUG_TGT) && sddebug > 1) #define SW_DEBUG if (swdebug == 1) scsi_log #define SW_DEBUG2 if (swdebug > 1) scsi_log #else /* SWDEBUG */ #define swdebug (0) #define DEBUGGING (0) #define SW_DEBUG if (0) scsi_log #define SW_DEBUG2 if (0) scsi_log #endif /* * Includes, Declarations and Local Data */ #include #include #include #include #include #include /* * macro for filling in lun value for scsi-1 support */ #define FILL_SCSI1_LUN(devp, pkt) \ if ((devp->sd_address.a_lun > 0) && \ (devp->sd_inq->inq_ansi == 0x1)) { \ ((union scsi_cdb *)(pkt)->pkt_cdbp)->scc_lun = \ devp->sd_address.a_lun; \ } char *sw_label = "scsi-watch"; static int scsi_watch_io_time = SCSI_WATCH_IO_TIME; /* * all info resides in the scsi watch structure * * the monitoring is performed by one separate thread which works * from a linked list of scsi_watch_request packets */ static struct scsi_watch { kthread_t *sw_thread; /* the watch thread */ kmutex_t sw_mutex; /* mutex protecting list */ /* and this structure */ kcondvar_t sw_cv; /* cv for waking up thread */ struct scsi_watch_request *sw_head; /* head of linked list */ /* of request structures */ uchar_t sw_state; /* for suspend-resume */ uchar_t sw_flags; /* to start at head of list */ /* for watch thread */ struct scsi_watch_request *swr_current; /* the command waiting to be */ /* processed by the watch */ /* thread which is being */ /* blocked */ } sw; #if !defined(lint) _NOTE(MUTEX_PROTECTS_DATA(scsi_watch::sw_mutex, scsi_watch)) #endif /* * Values for sw_state */ #define SW_RUNNING 0 #define SW_SUSPEND_REQUESTED 1 #define SW_SUSPENDED 2 /* * values for sw_flags */ #define SW_START_HEAD 0x1 struct scsi_watch_request { struct scsi_watch_request *swr_next; /* linked request list */ struct scsi_watch_request *swr_prev; clock_t swr_interval; /* interval between TURs */ clock_t swr_timeout; /* count down */ uchar_t swr_busy; /* TUR in progress */ uchar_t swr_what; /* watch or stop */ uchar_t swr_sense_length; /* required sense length */ struct scsi_pkt *swr_pkt; /* TUR pkt itself */ struct scsi_pkt *swr_rqpkt; /* request sense pkt */ struct buf *swr_rqbp; /* bp for request sense data */ int (*swr_callback)(); /* callback to driver */ caddr_t swr_callback_arg; kcondvar_t swr_terminate_cv; /* cv to wait on to cleanup */ /* request synchronously */ int swr_ref; /* refer count to the swr */ uchar_t suspend_destroy; /* flag for free later */ }; /* * values for swr flags */ #define SUSPEND_DESTROY 1 #if !defined(lint) _NOTE(SCHEME_PROTECTS_DATA("unshared data", scsi_watch_request)) #endif /* * values for sw_what */ #define SWR_WATCH 0 /* device watch */ #define SWR_STOP 1 /* stop monitoring and destroy swr */ #define SWR_SUSPEND_REQUESTED 2 /* req. pending suspend */ #define SWR_SUSPENDED 3 /* req. is suspended */ static void scsi_watch_request_destroy(struct scsi_watch_request *swr); static void scsi_watch_thread(void); static void scsi_watch_request_intr(struct scsi_pkt *pkt); /* * setup, called from _init(), the thread is created when we need it * and exits when there is nothing to do anymore and everything has been * cleaned up (ie. resources deallocated) */ void scsi_watch_init() { /* NO OTHER THREADS ARE RUNNING */ mutex_init(&sw.sw_mutex, NULL, MUTEX_DRIVER, NULL); cv_init(&sw.sw_cv, NULL, CV_DRIVER, NULL); sw.sw_state = SW_RUNNING; sw.sw_flags = 0; sw.swr_current = NULL; } /* * cleaning up, called from _fini() */ void scsi_watch_fini() { /* NO OTHER THREADS ARE RUNNING */ /* * hope and pray that the thread has exited */ ASSERT(sw.sw_thread == 0); mutex_destroy(&sw.sw_mutex); cv_destroy(&sw.sw_cv); } /* * allocate an swr (scsi watch request structure) and initialize pkts */ #define ROUTE &devp->sd_address opaque_t scsi_watch_request_submit( struct scsi_device *devp, int interval, int sense_length, int (*callback)(), /* callback function */ caddr_t cb_arg) /* device number */ { register struct scsi_watch_request *swr = NULL; register struct scsi_watch_request *sswr, *p; struct buf *bp = NULL; struct scsi_pkt *rqpkt = NULL; struct scsi_pkt *pkt = NULL; uchar_t dtype; SW_DEBUG((dev_info_t *)NULL, sw_label, SCSI_DEBUG, "scsi_watch_request_submit: Entering ...\n"); mutex_enter(&sw.sw_mutex); if (sw.sw_thread == 0) { register kthread_t *t; t = thread_create((caddr_t)NULL, 0, scsi_watch_thread, NULL, 0, &p0, TS_RUN, v.v_maxsyspri - 2); sw.sw_thread = t; } for (p = sw.sw_head; p != NULL; p = p->swr_next) { if ((p->swr_callback_arg == cb_arg) && (p->swr_callback == callback)) break; } /* update time interval for an existing request */ if (p) { if (p->swr_what != SWR_STOP) { p->swr_timeout = p->swr_interval = drv_usectohz(interval); p->swr_what = SWR_WATCH; p->swr_ref++; cv_signal(&sw.sw_cv); mutex_exit(&sw.sw_mutex); return ((opaque_t)p); } } mutex_exit(&sw.sw_mutex); /* * allocate space for scsi_watch_request */ swr = kmem_zalloc(sizeof (struct scsi_watch_request), KM_SLEEP); /* * allocate request sense bp and pkt and make cmd * we shouldn't really need it if ARQ is enabled but it is useful * if the ARQ failed. */ bp = scsi_alloc_consistent_buf(ROUTE, NULL, sense_length, B_READ, SLEEP_FUNC, NULL); rqpkt = scsi_init_pkt(ROUTE, (struct scsi_pkt *)NULL, bp, CDB_GROUP0, 1, 0, PKT_CONSISTENT, SLEEP_FUNC, NULL); (void) scsi_setup_cdb((union scsi_cdb *)rqpkt->pkt_cdbp, SCMD_REQUEST_SENSE, 0, SENSE_LENGTH, 0); FILL_SCSI1_LUN(devp, rqpkt); rqpkt->pkt_private = (opaque_t)swr; rqpkt->pkt_time = scsi_watch_io_time; rqpkt->pkt_comp = scsi_watch_request_intr; rqpkt->pkt_flags |= FLAG_HEAD; /* * Create TUR pkt or a zero byte WRITE(10) based on the * disk-type for reservation state. * For inq_dtype of SBC (DIRECT, dtype == 0) * OR for RBC devices (dtype is 0xE) AND for * ANSI version of SPC/SPC-2/SPC-3 (inq_ansi == 3-5). */ dtype = devp->sd_inq->inq_dtype & DTYPE_MASK; if (((dtype == 0) || (dtype == 0xE)) && (devp->sd_inq->inq_ansi > 2)) { pkt = scsi_init_pkt(ROUTE, (struct scsi_pkt *)NULL, NULL, CDB_GROUP1, sizeof (struct scsi_arq_status), 0, 0, SLEEP_FUNC, NULL); (void) scsi_setup_cdb((union scsi_cdb *)pkt->pkt_cdbp, SCMD_WRITE_G1, 0, 0, 0); } else { pkt = scsi_init_pkt(ROUTE, (struct scsi_pkt *)NULL, NULL, CDB_GROUP0, sizeof (struct scsi_arq_status), 0, 0, SLEEP_FUNC, NULL); (void) scsi_setup_cdb((union scsi_cdb *)pkt->pkt_cdbp, SCMD_TEST_UNIT_READY, 0, 0, 0); FILL_SCSI1_LUN(devp, pkt); } pkt->pkt_private = (opaque_t)swr; pkt->pkt_time = scsi_watch_io_time; pkt->pkt_comp = scsi_watch_request_intr; if (scsi_ifgetcap(&pkt->pkt_address, "tagged-qing", 1) == 1) { pkt->pkt_flags |= FLAG_STAG; } /* * set the allocated resources in swr */ swr->swr_rqbp = bp; swr->swr_rqpkt = rqpkt; swr->swr_pkt = pkt; swr->swr_timeout = swr->swr_interval = drv_usectohz(interval); swr->swr_callback = callback; swr->swr_callback_arg = cb_arg; swr->swr_what = SWR_WATCH; swr->swr_sense_length = (uchar_t)sense_length; swr->swr_ref = 1; cv_init(&swr->swr_terminate_cv, NULL, CV_DRIVER, NULL); /* * add to the list and wake up the thread */ mutex_enter(&sw.sw_mutex); swr->swr_next = sw.sw_head; swr->swr_prev = NULL; if (sw.sw_head) { sw.sw_head->swr_prev = swr; } sw.sw_head = swr; /* * reset all timeouts, so all requests are in sync again * XXX there is a small window where the watch thread releases * the mutex so that could upset the resyncing */ sswr = swr; while (sswr) { sswr->swr_timeout = swr->swr_interval; sswr = sswr->swr_next; } cv_signal(&sw.sw_cv); mutex_exit(&sw.sw_mutex); return ((opaque_t)swr); } /* * called by (eg. pwr management) to resume the scsi_watch_thread */ void scsi_watch_resume(opaque_t token) { struct scsi_watch_request *swr = (struct scsi_watch_request *)NULL; /* * Change the state to SW_RUNNING and wake up the scsi_watch_thread */ SW_DEBUG(0, sw_label, SCSI_DEBUG, "scsi_watch_resume:\n"); mutex_enter(&sw.sw_mutex); if (!sw.sw_head) goto exit; /* search for token */ for (swr = sw.sw_head; swr; swr = swr->swr_next) { if (swr == (struct scsi_watch_request *)token) break; } /* if we can't find this value, then we just do nothing */ if (swr == (struct scsi_watch_request *)NULL) goto exit; swr->swr_what = SWR_WATCH; /* see if all swr's are awake, then start the thread again */ for (swr = sw.sw_head; swr; swr = swr->swr_next) { if (swr->swr_what != SWR_WATCH) goto exit; } sw.sw_state = SW_RUNNING; cv_signal(&sw.sw_cv); exit: mutex_exit(&sw.sw_mutex); } /* * called by clients (eg. pwr management) to suspend the scsi_watch_thread */ void scsi_watch_suspend(opaque_t token) { struct scsi_watch_request *swr = (struct scsi_watch_request *)NULL; clock_t now; clock_t halfsec_delay = drv_usectohz(500000); SW_DEBUG(0, sw_label, SCSI_DEBUG, "scsi_watch_suspend:\n"); mutex_enter(&sw.sw_mutex); if (!sw.sw_head) goto exit; /* search for token */ for (swr = sw.sw_head; swr; swr = swr->swr_next) { if (swr == (struct scsi_watch_request *)token) break; } /* if we can't find this value, then we just do nothing */ if (swr == (struct scsi_watch_request *)NULL) goto exit; for (;;) { if (swr->swr_busy) { /* * XXX: Assumes that this thread can rerun * till all outstanding cmds are complete */ swr->swr_what = SWR_SUSPEND_REQUESTED; now = ddi_get_lbolt(); (void) cv_timedwait(&sw.sw_cv, &sw.sw_mutex, now + halfsec_delay); } else { swr->swr_what = SWR_SUSPENDED; break; } } /* see if all swr's are suspended, then suspend the thread */ for (swr = sw.sw_head; swr; swr = swr->swr_next) { if (swr->swr_what != SWR_SUSPENDED) goto exit; } sw.sw_state = SW_SUSPENDED; exit: mutex_exit(&sw.sw_mutex); } /* * destroy swr, called for watch thread */ static void scsi_watch_request_destroy(struct scsi_watch_request *swr) { ASSERT(MUTEX_HELD(&sw.sw_mutex)); ASSERT(swr->swr_busy == 0); SW_DEBUG((dev_info_t *)NULL, sw_label, SCSI_DEBUG, "scsi_watch_request_destroy: Entering ...\n"); if (swr->swr_ref != 0) return; /* * remove swr from linked list and destroy pkts */ if (swr->swr_prev) { swr->swr_prev->swr_next = swr->swr_next; } if (swr->swr_next) { swr->swr_next->swr_prev = swr->swr_prev; } if (sw.sw_head == swr) { sw.sw_head = swr->swr_next; } if (sw.swr_current == swr) { swr->suspend_destroy = SUSPEND_DESTROY; sw.swr_current = NULL; } scsi_destroy_pkt(swr->swr_rqpkt); scsi_free_consistent_buf(swr->swr_rqbp); scsi_destroy_pkt(swr->swr_pkt); cv_signal(&swr->swr_terminate_cv); } /* * scsi_watch_request_terminate() * called by requestor to terminate any pending watch request. * if the request is currently "busy", and the caller cannot wait, failure * is returned. O/w the request is cleaned up immediately. */ int scsi_watch_request_terminate(opaque_t token, int flags) { struct scsi_watch_request *swr = (struct scsi_watch_request *)token; struct scsi_watch_request *sswr; int count = 0; int free_flag = 0; /* * We try to clean up this request if we can. We also inform * the watch thread that we mucked around the list so it has * to start reading from head of list again. */ SW_DEBUG((dev_info_t *)NULL, sw_label, SCSI_DEBUG, "scsi_watch_request_terminate: Entering(0x%p) ...\n", (void *)swr); mutex_enter(&sw.sw_mutex); /* * check if it is still in the list */ sswr = sw.sw_head; while (sswr) { if (sswr == swr) { swr->swr_ref--; count = swr->swr_ref; if (swr->swr_busy) { if (flags == SCSI_WATCH_TERMINATE_NOWAIT) { mutex_exit(&sw.sw_mutex); return (SCSI_WATCH_TERMINATE_FAIL); } if (count != 0 && flags != SCSI_WATCH_TERMINATE_ALL_WAIT) { mutex_exit(&sw.sw_mutex); return (SCSI_WATCH_TERMINATE_SUCCESS); } if (SCSI_WATCH_TERMINATE_ALL_WAIT == flags) { swr->swr_ref = 0; count = 0; } swr->swr_what = SWR_STOP; cv_wait(&swr->swr_terminate_cv, &sw.sw_mutex); free_flag = 1; goto done; } else { if (SCSI_WATCH_TERMINATE_NOWAIT == flags || SCSI_WATCH_TERMINATE_ALL_WAIT == flags) { swr->swr_ref = 0; count = 0; } scsi_watch_request_destroy(swr); if (0 == count) { sw.sw_flags |= SW_START_HEAD; free_flag = 1; } goto done; } } sswr = sswr->swr_next; } done: mutex_exit(&sw.sw_mutex); if (!sswr) { return (SCSI_WATCH_TERMINATE_FAIL); } if (1 == free_flag && sswr->suspend_destroy != SUSPEND_DESTROY) { cv_destroy(&swr->swr_terminate_cv); kmem_free((caddr_t)swr, sizeof (struct scsi_watch_request)); } return (SCSI_WATCH_TERMINATE_SUCCESS); } /* * The routines scsi_watch_thread & scsi_watch_request_intr are * on different threads. * If there is no work to be done by the lower level driver * then swr->swr_busy will not be set. * In this case we will call CALLB_CPR_SAFE_BEGIN before * calling cv_timedwait. * In the other case where there is work to be done by * the lower level driver then the flag swr->swr_busy will * be set. * We cannot call CALLB_CPR_SAFE_BEGIN at this point the reason * is the intr thread can interfere with our operations. So * we do a cv_timedwait here. Now at the completion of the * lower level driver's work we will call CALLB_CPR_SAFE_BEGIN * in scsi_watch_request_intr. * In all the cases we will call CALLB_CPR_SAFE_END only if * we already called a CALLB_CPR_SAFE_BEGIN and this is flagged * by sw_cpr_flag. * Warlock has a problem when we use different locks * on the same type of structure in different contexts. * We use callb_cpr_t in both scsi_watch and esp_callback threads. * we use different mutexe's in different threads. And * this is not acceptable to warlock. To avoid this * problem we use the same name for the mutex in * both scsi_watch & esp_callback. when __lock_lint is not defined * esp_callback uses the mutex on the stack and in scsi_watch * a static variable. But when __lock_lint is defined * we make a mutex which is global in esp_callback and * a external mutex for scsi_watch. */ static int sw_cmd_count = 0; static int sw_cpr_flag = 0; static callb_cpr_t cpr_info; #ifndef __lock_lint static kmutex_t cpr_mutex; #else extern kmutex_t cpr_mutex; #endif #if !defined(lint) _NOTE(MUTEX_PROTECTS_DATA(cpr_mutex, cpr_info)) _NOTE(MUTEX_PROTECTS_DATA(cpr_mutex, sw_cmd_count)) #endif /* * the scsi watch thread: * it either wakes up if there is work to do or if the cv_timeait * timed out * normally, it wakes up every seconds and checks the list. * the interval is not very accurate if the cv was signalled but that * really doesn't matter much * it is more important that we fire off all TURs simulataneously so * we don't have to wake up frequently */ static void scsi_watch_thread() { struct scsi_watch_request *swr, *next; clock_t now; clock_t last_delay = 0; clock_t next_delay = 0; clock_t onesec = drv_usectohz(1000000); clock_t exit_delay = 60 * onesec; SW_DEBUG((dev_info_t *)NULL, sw_label, SCSI_DEBUG, "scsi_watch_thread: Entering ...\n"); #if !defined(lint) _NOTE(NO_COMPETING_THREADS_NOW); #endif mutex_init(&cpr_mutex, NULL, MUTEX_DRIVER, NULL); CALLB_CPR_INIT(&cpr_info, &cpr_mutex, callb_generic_cpr, "scsi_watch"); sw_cpr_flag = 0; #if !defined(lint) /*LINTED*/ _NOTE(COMPETING_THREADS_NOW); #endif /* * grab the mutex and wait for work */ mutex_enter(&sw.sw_mutex); if (sw.sw_head == NULL) { cv_wait(&sw.sw_cv, &sw.sw_mutex); } /* * now loop forever for work; if queue is empty exit */ for (;;) { head: swr = sw.sw_head; while (swr) { /* * If state is not running, wait for scsi_watch_resume * to signal restart, but before going into cv_wait * need to let the PM framework know that it is safe * to stop this thread for CPR */ if (sw.sw_state != SW_RUNNING) { SW_DEBUG(0, sw_label, SCSI_DEBUG, "scsi_watch_thread suspended\n"); mutex_enter(&cpr_mutex); if (!sw_cmd_count) { CALLB_CPR_SAFE_BEGIN(&cpr_info); sw_cpr_flag = 1; } mutex_exit(&cpr_mutex); sw.swr_current = swr; cv_wait(&sw.sw_cv, &sw.sw_mutex); /* * Need to let the PM framework know that it * is no longer safe to stop the thread for * CPR. */ mutex_exit(&sw.sw_mutex); mutex_enter(&cpr_mutex); if (sw_cpr_flag == 1) { CALLB_CPR_SAFE_END( &cpr_info, &cpr_mutex); sw_cpr_flag = 0; } mutex_exit(&cpr_mutex); mutex_enter(&sw.sw_mutex); if (SUSPEND_DESTROY == swr->suspend_destroy) { cv_destroy(&swr->swr_terminate_cv); kmem_free((caddr_t)swr, sizeof (struct scsi_watch_request)); goto head; } else { sw.swr_current = NULL; } } if (next_delay == 0) { next_delay = swr->swr_timeout; } else { next_delay = min(swr->swr_timeout, next_delay); } swr->swr_timeout -= last_delay; next = swr->swr_next; SW_DEBUG((dev_info_t *)NULL, sw_label, SCSI_DEBUG, "scsi_watch_thread: " "swr(0x%p),what=%x,timeout=%lx," "interval=%lx,delay=%lx\n", (void *)swr, swr->swr_what, swr->swr_timeout, swr->swr_interval, last_delay); switch (swr->swr_what) { case SWR_SUSPENDED: case SWR_SUSPEND_REQUESTED: /* if we are suspended, don't do anything */ break; case SWR_STOP: if (swr->swr_busy == 0) { scsi_watch_request_destroy(swr); } break; default: if (swr->swr_timeout <= 0 && !swr->swr_busy) { swr->swr_busy = 1; /* * submit the cmd and let the completion * function handle the result * release the mutex (good practice) * this should be safe even if the list * is changing */ mutex_exit(&sw.sw_mutex); mutex_enter(&cpr_mutex); sw_cmd_count++; mutex_exit(&cpr_mutex); SW_DEBUG((dev_info_t *)NULL, sw_label, SCSI_DEBUG, "scsi_watch_thread: " "Starting TUR\n"); if (scsi_transport(swr->swr_pkt) != TRAN_ACCEPT) { /* * try again later */ swr->swr_busy = 0; SW_DEBUG((dev_info_t *)NULL, sw_label, SCSI_DEBUG, "scsi_watch_thread: " "Transport Failed\n"); mutex_enter(&cpr_mutex); sw_cmd_count--; mutex_exit(&cpr_mutex); } mutex_enter(&sw.sw_mutex); swr->swr_timeout = swr->swr_interval; } break; } swr = next; if (sw.sw_flags & SW_START_HEAD) { sw.sw_flags &= ~SW_START_HEAD; goto head; } } /* * delay using cv_timedwait; we return when * signalled or timed out */ if (sw.sw_head != NULL) { if (next_delay <= 0) { next_delay = onesec; } } else { next_delay = exit_delay; } now = ddi_get_lbolt(); mutex_enter(&cpr_mutex); if (!sw_cmd_count) { CALLB_CPR_SAFE_BEGIN(&cpr_info); sw_cpr_flag = 1; } mutex_exit(&cpr_mutex); /* * if we return from cv_timedwait because we were * signalled, the delay is not accurate but that doesn't * really matter */ (void) cv_timedwait(&sw.sw_cv, &sw.sw_mutex, now + next_delay); mutex_exit(&sw.sw_mutex); mutex_enter(&cpr_mutex); if (sw_cpr_flag == 1) { CALLB_CPR_SAFE_END(&cpr_info, &cpr_mutex); sw_cpr_flag = 0; } mutex_exit(&cpr_mutex); mutex_enter(&sw.sw_mutex); last_delay = next_delay; next_delay = 0; /* * is there still work to do? */ if (sw.sw_head == NULL) { break; } } /* * no more work to do, reset sw_thread and exit */ sw.sw_thread = 0; mutex_exit(&sw.sw_mutex); #ifndef __lock_lint mutex_enter(&cpr_mutex); CALLB_CPR_EXIT(&cpr_info); #endif mutex_destroy(&cpr_mutex); SW_DEBUG((dev_info_t *)NULL, sw_label, SCSI_DEBUG, "scsi_watch_thread: Exiting ...\n"); } /* * callback completion function for scsi watch pkt */ #define SCBP(pkt) ((struct scsi_status *)(pkt)->pkt_scbp) #define SCBP_C(pkt) ((*(pkt)->pkt_scbp) & STATUS_MASK) static void scsi_watch_request_intr(struct scsi_pkt *pkt) { struct scsi_watch_result result; struct scsi_watch_request *swr = (struct scsi_watch_request *)pkt->pkt_private; struct scsi_status *rqstatusp; struct scsi_extended_sense *rqsensep = NULL; int amt = 0; SW_DEBUG((dev_info_t *)NULL, sw_label, SCSI_DEBUG, "scsi_watch_intr: Entering ...\n"); /* * first check if it is the TUR or RQS pkt */ if (pkt == swr->swr_pkt) { if (SCBP_C(pkt) != STATUS_GOOD && SCBP_C(pkt) != STATUS_RESERVATION_CONFLICT) { if (SCBP(pkt)->sts_chk && ((pkt->pkt_state & STATE_ARQ_DONE) == 0)) { /* * submit the request sense pkt */ SW_DEBUG((dev_info_t *)NULL, sw_label, SCSI_DEBUG, "scsi_watch_intr: " "Submitting a Request Sense " "Packet\n"); if (scsi_transport(swr->swr_rqpkt) != TRAN_ACCEPT) { /* * just give up and try again later */ SW_DEBUG((dev_info_t *)NULL, sw_label, SCSI_DEBUG, "scsi_watch_intr: " "Request Sense " "Transport Failed\n"); goto done; } /* * wait for rqsense to complete */ return; } else if (SCBP(pkt)->sts_chk) { /* * check the autorequest sense data */ struct scsi_arq_status *arqstat = (struct scsi_arq_status *)pkt->pkt_scbp; rqstatusp = &arqstat->sts_rqpkt_status; rqsensep = &arqstat->sts_sensedata; amt = swr->swr_sense_length - arqstat->sts_rqpkt_resid; SW_DEBUG((dev_info_t *)NULL, sw_label, SCSI_DEBUG, "scsi_watch_intr: " "Auto Request Sense, amt=%x\n", amt); } } } else if (pkt == swr->swr_rqpkt) { /* * check the request sense data */ rqstatusp = (struct scsi_status *)pkt->pkt_scbp; rqsensep = (struct scsi_extended_sense *) swr->swr_rqbp->b_un.b_addr; amt = swr->swr_sense_length - pkt->pkt_resid; SW_DEBUG((dev_info_t *)NULL, sw_label, SCSI_DEBUG, "scsi_watch_intr: " "Request Sense Completed, amt=%x\n", amt); } else { /* * should not reach here!!! */ scsi_log((dev_info_t *)NULL, sw_label, CE_PANIC, "scsi_watch_intr: Bad Packet(0x%p)", (void *)pkt); } if (rqsensep) { /* * check rqsense status and data */ if (rqstatusp->sts_busy || rqstatusp->sts_chk) { /* * try again later */ SW_DEBUG((dev_info_t *)NULL, sw_label, SCSI_DEBUG, "scsi_watch_intr: " "Auto Request Sense Failed - " "Busy or Check Condition\n"); goto done; } SW_DEBUG((dev_info_t *)NULL, sw_label, SCSI_DEBUG, "scsi_watch_intr: " "es_key=%x, adq=%x, amt=%x\n", rqsensep->es_key, rqsensep->es_add_code, amt); } /* * callback to target driver to do the real work */ result.statusp = SCBP(swr->swr_pkt); result.sensep = rqsensep; result.actual_sense_length = (uchar_t)amt; result.pkt = swr->swr_pkt; if ((*swr->swr_callback)(swr->swr_callback_arg, &result)) { swr->swr_what = SWR_STOP; } done: swr->swr_busy = 0; mutex_enter(&cpr_mutex); sw_cmd_count --; if (!sw_cmd_count) { CALLB_CPR_SAFE_BEGIN(&cpr_info); sw_cpr_flag = 1; } mutex_exit(&cpr_mutex); } /* * scsi_watch_get_ref_count * called by clients to query the reference count for a given token. * return the number of reference count or 0 if the given token is * not found. */ int scsi_watch_get_ref_count(opaque_t token) { struct scsi_watch_request *swr = (struct scsi_watch_request *)token; struct scsi_watch_request *sswr; int rval = 0; SW_DEBUG((dev_info_t *)NULL, sw_label, SCSI_DEBUG, "scsi_watch_get_ref_count: Entering(0x%p) ...\n", (void *)swr); mutex_enter(&sw.sw_mutex); sswr = sw.sw_head; while (sswr) { if (sswr == swr) { rval = swr->swr_ref; mutex_exit(&sw.sw_mutex); return (rval); } sswr = sswr->swr_next; } mutex_exit(&sw.sw_mutex); return (rval); }