/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 1994, 2010, Oracle and/or its affiliates. All rights reserved. */ #include /* * Generic SCSI Host Bus Adapter interface implementation */ #include #include #include #include /* for minclsyspri */ #include #include #include #include #include #include #include #include #include #include #include #include extern struct scsi_pkt *scsi_init_cache_pkt(struct scsi_address *, struct scsi_pkt *, struct buf *, int, int, int, int, int (*)(caddr_t), caddr_t); extern void scsi_free_cache_pkt(struct scsi_address *, struct scsi_pkt *); extern void scsi_cache_dmafree(struct scsi_address *, struct scsi_pkt *); extern void scsi_sync_cache_pkt(struct scsi_address *, struct scsi_pkt *); extern int modrootloaded; /* * Round up all allocations so that we can guarantee * long-long alignment. This is the same alignment * provided by kmem_alloc(). */ #define ROUNDUP(x) (((x) + 0x07) & ~0x07) /* Magic number to track correct allocations in wrappers */ #define PKT_WRAPPER_MAGIC 0xa110ced /* alloced correctly */ kmutex_t scsi_flag_nointr_mutex; kcondvar_t scsi_flag_nointr_cv; kmutex_t scsi_log_mutex; /* asynchronous probe barrier deletion data structures */ static kmutex_t scsi_hba_barrier_mutex; static kcondvar_t scsi_hba_barrier_cv; static struct scsi_hba_barrier { struct scsi_hba_barrier *barrier_next; clock_t barrier_endtime; dev_info_t *barrier_probe; } *scsi_hba_barrier_list; static int scsi_hba_devi_is_barrier(dev_info_t *probe); static void scsi_hba_barrier_tran_tgt_free(dev_info_t *probe); static void scsi_hba_barrier_add(dev_info_t *probe, int seconds); static int scsi_hba_remove_node(dev_info_t *child); static void scsi_hba_barrier_daemon(void *arg); /* LUN-change ASC/ASCQ processing data structures (stage1 and stage2) */ static kmutex_t scsi_lunchg1_mutex; static kcondvar_t scsi_lunchg1_cv; static struct scsi_pkt *scsi_lunchg1_list; static void scsi_lunchg1_daemon(void *arg); static kmutex_t scsi_lunchg2_mutex; static kcondvar_t scsi_lunchg2_cv; static struct scsi_lunchg2 { struct scsi_lunchg2 *lunchg2_next; char *lunchg2_path; } *scsi_lunchg2_list; static void scsi_lunchg2_daemon(void *arg); static int scsi_findchild(dev_info_t *self, char *name, char *addr, int init, dev_info_t **dchildp, mdi_pathinfo_t **pchildp, int *ppi); /* return value defines for scsi_findchild */ #define CHILD_TYPE_NONE 0 #define CHILD_TYPE_DEVINFO 1 #define CHILD_TYPE_PATHINFO 2 /* * Enumeration code path currently being followed. SE_BUSCONFIG results in * DEVI_SID_NODEID, and SE_HP (hotplug) results in DEVI_SID_HP_NODEID. * * Since hotplug enumeration is based on information obtained from hardware * (tgtmap/report_lun) the type/severity of enumeration error messages is * sometimes based SE_HP (indirectly via ndi_dev_is_hotplug_node()). By * convention, these messages are all produced by scsi_enumeration_failed(). */ typedef enum { SE_BUSCONFIG = 0, SE_HP = 1 } scsi_enum_t; /* compatible properties of driver to use during probe/enumeration operations */ static char *compatible_probe = "scsa,probe"; static char *compatible_nodev = "scsa,nodev"; static char *scsi_probe_ascii[] = SCSIPROBE_ASCII; /* number of LUNs we attempt to get on the first SCMD_REPORT_LUNS command */ int scsi_lunrpt_default_max = 256; int scsi_lunrpt_timeout = 3; /* seconds */ /* * Only enumerate one lun if reportluns fails on a SCSI_VERSION_3 device * (tunable based on calling context). */ int scsi_lunrpt_failed_do1lun = (1 << SE_HP); /* 'scsi-binding-set' value for legacy enumerated 'spi' transports */ char *scsi_binding_set_spi = "spi"; /* enable NDI_DEVI_DEBUG for bus_[un]config operations */ int scsi_hba_bus_config_debug = 0; /* DEBUG: enable NDI_DEVI_REMOVE for bus_unconfig of dynamic node */ int scsi_hba_bus_unconfig_remove = 0; /* number of probe serilization messages */ int scsi_hba_wait_msg = 5; /* * Establish the timeout used to cache (in the probe node) the fact that the * device does not exist. This replaces the target specific probe cache. */ int scsi_hba_barrier_timeout = (60); /* seconds */ #ifdef DEBUG int scsi_hba_bus_config_failure_msg = 0; int scsi_hba_bus_config_failure_dbg = 0; int scsi_hba_bus_config_success_msg = 0; int scsi_hba_bus_config_success_dbg = 0; #endif /* DEBUG */ /* * Structure for scsi_hba_iportmap_* implementation/wrap. */ typedef struct impl_scsi_iportmap { dev_info_t *iportmap_hba_dip; damap_t *iportmap_dam; int iportmap_create_window; uint64_t iportmap_create_time; /* clock64_t */ int iportmap_create_csync_usec; int iportmap_settle_usec; int iportmap_sync_cnt; } impl_scsi_iportmap_t; /* * Structure for scsi_hba_tgtmap_* implementation/wrap. * * Every call to scsi_hba_tgtmap_set_begin will increment tgtmap_reports, * and a call to scsi_hba_tgtmap_set_end will reset tgtmap_reports to zero. * If, in scsi_hba_tgtmap_set_begin, we detect a tgtmap_reports value of * scsi_hba_tgtmap_reports_max we produce a message to indicate that * the caller is never completing an observation (i.e. we are not making * any forward progress). If this message occurs, it indicates that the * solaris hotplug ramifications at the target and lun level are no longer * tracking. * * NOTE: LUNMAPSIZE OK for now, but should be dynamic in reportlun code. */ typedef struct impl_scsi_tgtmap { scsi_hba_tran_t *tgtmap_tran; int tgtmap_reports; /* _begin, no _end */ int tgtmap_noisy; scsi_tgt_activate_cb_t tgtmap_activate_cb; scsi_tgt_deactivate_cb_t tgtmap_deactivate_cb; void *tgtmap_mappriv; damap_t *tgtmap_dam[SCSI_TGT_NTYPES]; int tgtmap_create_window; uint64_t tgtmap_create_time; /* clock64_t */ int tgtmap_create_csync_usec; int tgtmap_settle_usec; int tgtmap_sync_cnt; } impl_scsi_tgtmap_t; #define LUNMAPSIZE 256 /* 256 LUNs/target */ /* Produce warning if number of begins without an end exceed this value */ int scsi_hba_tgtmap_reports_max = 256; static int scsi_tgtmap_sync(scsi_hba_tgtmap_t *, int); /* Default settle_usec damap_sync factor */ int scsi_hba_map_settle_f = 10; /* Prototype for static dev_ops devo_*() functions */ static int scsi_hba_info( dev_info_t *self, ddi_info_cmd_t infocmd, void *arg, void **result); /* Prototypes for static bus_ops bus_*() functions */ static int scsi_hba_bus_ctl( dev_info_t *self, dev_info_t *child, ddi_ctl_enum_t op, void *arg, void *result); static int scsi_hba_map_fault( dev_info_t *self, dev_info_t *child, struct hat *hat, struct seg *seg, caddr_t addr, struct devpage *dp, pfn_t pfn, uint_t prot, uint_t lock); static int scsi_hba_get_eventcookie( dev_info_t *self, dev_info_t *child, char *name, ddi_eventcookie_t *eventp); static int scsi_hba_add_eventcall( dev_info_t *self, dev_info_t *child, ddi_eventcookie_t event, void (*callback)( dev_info_t *dip, ddi_eventcookie_t event, void *arg, void *bus_impldata), void *arg, ddi_callback_id_t *cb_id); static int scsi_hba_remove_eventcall( dev_info_t *self, ddi_callback_id_t id); static int scsi_hba_post_event( dev_info_t *self, dev_info_t *child, ddi_eventcookie_t event, void *bus_impldata); static int scsi_hba_bus_config( dev_info_t *self, uint_t flags, ddi_bus_config_op_t op, void *arg, dev_info_t **childp); static int scsi_hba_bus_unconfig( dev_info_t *self, uint_t flags, ddi_bus_config_op_t op, void *arg); static int scsi_hba_fm_init_child( dev_info_t *self, dev_info_t *child, int cap, ddi_iblock_cookie_t *ibc); static int scsi_hba_bus_power( dev_info_t *self, void *impl_arg, pm_bus_power_op_t op, void *arg, void *result); /* bus_ops vector for SCSI HBA's. */ static struct bus_ops scsi_hba_busops = { BUSO_REV, nullbusmap, /* bus_map */ NULL, /* bus_get_intrspec */ NULL, /* bus_add_intrspec */ NULL, /* bus_remove_intrspec */ scsi_hba_map_fault, /* bus_map_fault */ ddi_dma_map, /* bus_dma_map */ ddi_dma_allochdl, /* bus_dma_allochdl */ ddi_dma_freehdl, /* bus_dma_freehdl */ ddi_dma_bindhdl, /* bus_dma_bindhdl */ ddi_dma_unbindhdl, /* bus_unbindhdl */ ddi_dma_flush, /* bus_dma_flush */ ddi_dma_win, /* bus_dma_win */ ddi_dma_mctl, /* bus_dma_ctl */ scsi_hba_bus_ctl, /* bus_ctl */ ddi_bus_prop_op, /* bus_prop_op */ scsi_hba_get_eventcookie, /* bus_get_eventcookie */ scsi_hba_add_eventcall, /* bus_add_eventcall */ scsi_hba_remove_eventcall, /* bus_remove_eventcall */ scsi_hba_post_event, /* bus_post_event */ NULL, /* bus_intr_ctl */ scsi_hba_bus_config, /* bus_config */ scsi_hba_bus_unconfig, /* bus_unconfig */ scsi_hba_fm_init_child, /* bus_fm_init */ NULL, /* bus_fm_fini */ NULL, /* bus_fm_access_enter */ NULL, /* bus_fm_access_exit */ scsi_hba_bus_power /* bus_power */ }; /* cb_ops for hotplug :devctl and :scsi support */ static struct cb_ops scsi_hba_cbops = { scsi_hba_open, scsi_hba_close, nodev, /* strategy */ nodev, /* print */ nodev, /* dump */ nodev, /* read */ nodev, /* write */ scsi_hba_ioctl, /* ioctl */ nodev, /* devmap */ nodev, /* mmap */ nodev, /* segmap */ nochpoll, /* poll */ ddi_prop_op, /* prop_op */ NULL, /* stream */ D_NEW|D_MP|D_HOTPLUG, /* cb_flag */ CB_REV, /* rev */ nodev, /* int (*cb_aread)() */ nodev /* int (*cb_awrite)() */ }; /* Prototypes for static scsi_hba.c/SCSA private lunmap interfaces */ static int scsi_lunmap_create( dev_info_t *self, impl_scsi_tgtmap_t *tgtmap, char *tgt_addr); static void scsi_lunmap_destroy( dev_info_t *self, impl_scsi_tgtmap_t *tgtmap, char *tgt_addr); static void scsi_lunmap_set_begin( dev_info_t *self, damap_t *lundam); static int scsi_lunmap_set_add( dev_info_t *self, damap_t *lundam, char *taddr, scsi_lun64_t lun_num, int lun_sfunc); static void scsi_lunmap_set_end( dev_info_t *self, damap_t *lundam); /* Prototypes for static misc. scsi_hba.c private bus_config interfaces */ static int scsi_hba_bus_config_iports(dev_info_t *self, uint_t flags, ddi_bus_config_op_t op, void *arg, dev_info_t **childp); static int scsi_hba_bus_config_spi(dev_info_t *self, uint_t flags, ddi_bus_config_op_t op, void *arg, dev_info_t **childp); static dev_info_t *scsi_hba_bus_config_port(dev_info_t *self, char *nameaddr, scsi_enum_t se); #ifdef sparc static int scsi_hba_bus_config_prom_node(dev_info_t *self, uint_t flags, void *arg, dev_info_t **childp); #endif /* sparc */ /* * SCSI_HBA_LOG is used for all messages. A logging level is specified when * generating a message. Some levels correspond directly to cmn_err levels, * some are associated with increasing levels diagnostic/debug output (LOG1-4), * and others are associated with specific levels of interface (LOGMAP). * For _LOG() messages, a __func__ prefix will identify the function origin * of the message. For _LOG_NF messages, there is no function prefix or * self/child context. Filtering of messages is provided based on logging * level, but messages with cmn_err logging level and messages generated * generated with _LOG_NF() are never filtered. * * For debugging, more complete information can be displayed with each message * (full device path and pointer values) by adjusting scsi_hba_log_info. */ /* logging levels */ #define SCSI_HBA_LOGCONT CE_CONT #define SCSI_HBA_LOGNOTE CE_NOTE #define SCSI_HBA_LOGWARN CE_WARN #define SCSI_HBA_LOGPANIC CE_PANIC #define SCSI_HBA_LOGIGNORE CE_IGNORE #define SCSI_HBA_LOG_CE_MASK 0x0000000F /* no filter for these levels */ #define SCSI_HBA_LOG1 0x00000010 /* DIAG1 level enable */ #define SCSI_HBA_LOG2 0x00000020 /* DIAG2 level enable */ #define SCSI_HBA_LOG3 0x00000040 /* DIAG3 level enable */ #define SCSI_HBA_LOG4 0x00000080 /* DIAG4 level enable */ #define SCSI_HBA_LOGMAPPHY 0x00000100 /* MAPPHY level enable */ #define SCSI_HBA_LOGMAPIPT 0x00000200 /* MAPIPT level enable */ #define SCSI_HBA_LOGMAPTGT 0x00000400 /* MAPTGT level enable */ #define SCSI_HBA_LOGMAPLUN 0x00000800 /* MAPLUN level enable */ #define SCSI_HBA_LOGMAPCFG 0x00001000 /* MAPCFG level enable */ #define SCSI_HBA_LOGMAPUNCFG 0x00002000 /* MAPUNCFG level enable */ #define SCSI_HBA_LOGTRACE 0x00010000 /* TRACE enable */ #if (CE_CONT | CE_NOTE | CE_WARN | CE_PANIC | CE_IGNORE) > SCSI_HBA_LOG_CE_MASK Error, problem with CE_ definitions #endif /* * Tunable log message augmentation and filters: filters do not apply to * SCSI_HBA_LOG_CE_MASK level messages or LOG_NF() messages. * * An example set of /etc/system tunings to simplify debug a SCSA pHCI HBA * driver called "pmcs", including "scsi_vhci" operation, by capturing * log information in the system log might be: * * echo "set scsi:scsi_hba_log_filter_level=0x3ff0" >> /etc/system * echo "set scsi:scsi_hba_log_filter_phci=\"pmcs\"" >> /etc/system * echo "set scsi:scsi_hba_log_filter_vhci=\"scsi_vhci\"" >> /etc/system * * To capture information on just HBA-SCSAv3 *map operation, use * echo "set scsi:scsi_hba_log_filter_level=0x3f10" >> /etc/system * * For debugging an HBA driver, you may also want to set: * * echo "set scsi:scsi_hba_log_align=1" >> /etc/system * echo "set scsi:scsi_hba_log_mt_disable=0x6" >> /etc/system * echo "set mtc_off=1" >> /etc/system * echo "set mdi_mtc_off=1" >> /etc/system * echo "set scsi:scsi_hba_log_fcif=0" >> /etc/system */ int scsi_hba_log_filter_level = SCSI_HBA_LOG1 | 0; char *scsi_hba_log_filter_phci = "\0\0\0\0\0\0\0\0\0\0\0\0"; char *scsi_hba_log_filter_vhci = "\0\0\0\0\0\0\0\0\0\0\0\0"; int scsi_hba_log_align = 0; /* NOTE: will not cause truncation */ int scsi_hba_log_fcif = '!'; /* "^!?" first char in format */ /* NOTE: iff level > SCSI_HBA_LOG1 */ /* '\0'0x00 -> console and system log */ /* '^' 0x5e -> console_only */ /* '!' 0x21 -> system log only */ /* '?' 0x2F -> See cmn_err(9F) */ int scsi_hba_log_info = /* augmentation: extra info output */ (0 << 0) | /* 0x0001: process information */ (0 << 1) | /* 0x0002: full /devices path */ (0 << 2); /* 0x0004: devinfo pointer */ int scsi_hba_log_mt_disable = /* SCSI_ENUMERATION_MT_LUN_DISABLE | (ie 0x02) */ /* SCSI_ENUMERATION_MT_TARGET_DISABLE | (ie 0x04) */ 0; /* static data for HBA logging subsystem */ static kmutex_t scsi_hba_log_mutex; static char scsi_hba_log_i[512]; static char scsi_hba_log_buf[512]; static char scsi_hba_fmt[512]; /* Macros to use in scsi_hba.c source code below */ #define SCSI_HBA_LOG(x) scsi_hba_log x #define _LOG(level) SCSI_HBA_LOG##level, __func__ #define _MAP(map) SCSI_HBA_LOGMAP##map, __func__ #define _LOG_NF(level) SCSI_HBA_LOG##level, NULL, NULL, NULL #define _LOG_TRACE _LOG(TRACE) #define _LOGLUN _MAP(LUN) #define _LOGTGT _MAP(TGT) #define _LOGIPT _MAP(IPT) #define _LOGPHY _MAP(PHY) #define _LOGCFG _MAP(CFG) #define _LOGUNCFG _MAP(UNCFG) /*PRINTFLIKE5*/ static void scsi_hba_log(int level, const char *func, dev_info_t *self, dev_info_t *child, const char *fmt, ...) { va_list ap; int clevel; int align; char *info; char *f; char *ua; /* derive self from child's parent */ if ((self == NULL) && child) self = ddi_get_parent(child); /* no filtering of SCSI_HBA_LOG_CE_MASK or LOG_NF messages */ if (((level & SCSI_HBA_LOG_CE_MASK) != level) && (func != NULL)) { /* scsi_hba_log_filter_level: filter on level as bitmask */ if ((level & scsi_hba_log_filter_level) == 0) return; /* scsi_hba_log_filter_phci/vhci: on name of driver */ if (*scsi_hba_log_filter_phci && ((self == NULL) || (ddi_driver_name(self) == NULL) || strcmp(ddi_driver_name(self), scsi_hba_log_filter_phci))) { /* does not match pHCI, check vHCI */ if (*scsi_hba_log_filter_vhci && ((self == NULL) || (ddi_driver_name(self) == NULL) || strcmp(ddi_driver_name(self), scsi_hba_log_filter_vhci))) { /* does not match vHCI */ return; } } /* passed filters, determine align */ align = scsi_hba_log_align; /* shorten func for filtered output */ if (strncmp(func, "scsi_hba_", 9) == 0) func += 9; if (strncmp(func, "scsi_", 5) == 0) func += 5; } else { /* don't align output that is never filtered */ align = 0; } /* determine the cmn_err form from the level */ clevel = ((level & SCSI_HBA_LOG_CE_MASK) == level) ? level : CE_CONT; /* protect common buffers used to format output */ mutex_enter(&scsi_hba_log_mutex); /* skip special first characters, we add them back below */ f = (char *)fmt; if (*f && strchr("^!?", *f)) f++; va_start(ap, fmt); (void) vsprintf(scsi_hba_log_buf, f, ap); va_end(ap); /* augment message with 'information' */ info = scsi_hba_log_i; *info = '\0'; if ((scsi_hba_log_info & 0x0001) && curproc && PTOU(curproc)->u_comm) { (void) sprintf(info, "%s[%d]%p ", PTOU(curproc)->u_comm, curproc->p_pid, (void *)curthread); info += strlen(info); } if (self) { if ((scsi_hba_log_info & 0x0004) && (child || self)) { (void) sprintf(info, "%p ", (void *)(child ? child : self)); info += strlen(info); } if (scsi_hba_log_info & 0x0002) { (void) ddi_pathname(child ? child : self, info); (void) strcat(info, " "); info += strlen(info); } /* always provide 'default' information about self &child */ (void) sprintf(info, "%s%d ", ddi_driver_name(self), ddi_get_instance(self)); info += strlen(info); if (child) { ua = ddi_get_name_addr(child); (void) sprintf(info, "%s@%s ", ddi_node_name(child), (ua && *ua) ? ua : ""); info += strlen(info); } } /* turn off alignment if truncation would occur */ if (align && ((strlen(func) > 18) || (strlen(scsi_hba_log_i) > 36))) align = 0; /* adjust for aligned output */ if (align) { if (func == NULL) func = ""; /* remove trailing blank with align output */ if ((info != scsi_hba_log_i) && (*(info -1) == '\b')) *(info - 1) = '\0'; } /* special "first character in format" must be in format itself */ f = scsi_hba_fmt; if (fmt[0] && strchr("^!?", fmt[0])) *f++ = fmt[0]; else if (scsi_hba_log_fcif && (level > SCSI_HBA_LOG1)) *f++ = (char)scsi_hba_log_fcif; /* add global fcif */ if (align) (void) sprintf(f, "%s", "%-18.18s: %36.36s: %s%s"); else (void) sprintf(f, "%s", func ? "%s: %s%s%s" : "%s%s%s"); if (func) cmn_err(clevel, scsi_hba_fmt, func, scsi_hba_log_i, scsi_hba_log_buf, clevel == CE_CONT ? "\n" : ""); else cmn_err(clevel, scsi_hba_fmt, scsi_hba_log_i, scsi_hba_log_buf, clevel == CE_CONT ? "\n" : ""); mutex_exit(&scsi_hba_log_mutex); } int scsi_enumeration_failed_panic = 0; int scsi_enumeration_failed_hotplug = 1; static void scsi_enumeration_failed(dev_info_t *child, scsi_enum_t se, char *arg, char *when) { /* If 'se' is -1 the 'se' value comes from child. */ if (se == -1) { ASSERT(child); se = ndi_dev_is_hotplug_node(child) ? SE_HP : SE_BUSCONFIG; } if (scsi_enumeration_failed_panic) { /* set scsi_enumeration_failed_panic to debug */ SCSI_HBA_LOG((_LOG(PANIC), NULL, child, "%s%senumeration failed during %s", arg ? arg : "", arg ? " " : "", when)); } else if (scsi_enumeration_failed_hotplug && (se == SE_HP)) { /* set scsi_enumeration_failed_hotplug for console messages */ SCSI_HBA_LOG((_LOG(WARN), NULL, child, "%s%senumeration failed during %s", arg ? arg : "", arg ? " " : "", when)); } else { /* default */ SCSI_HBA_LOG((_LOG(2), NULL, child, "%s%senumeration failed during %s", arg ? arg : "", arg ? " " : "", when)); } } /* * scsi_hba version of [nm]di_devi_enter/[nm]di_devi_exit that detects if HBA * is a PHCI, and chooses mdi/ndi locking implementation. */ static void scsi_hba_devi_enter(dev_info_t *self, int *circp) { if (MDI_PHCI(self)) mdi_devi_enter(self, circp); else ndi_devi_enter(self, circp); } static int scsi_hba_devi_tryenter(dev_info_t *self, int *circp) { if (MDI_PHCI(self)) return (mdi_devi_tryenter(self, circp)); else return (ndi_devi_tryenter(self, circp)); } static void scsi_hba_devi_exit(dev_info_t *self, int circ) { if (MDI_PHCI(self)) mdi_devi_exit(self, circ); else ndi_devi_exit(self, circ); } static void scsi_hba_devi_enter_phci(dev_info_t *self, int *circp) { if (MDI_PHCI(self)) mdi_devi_enter_phci(self, circp); } static void scsi_hba_devi_exit_phci(dev_info_t *self, int circ) { if (MDI_PHCI(self)) mdi_devi_exit_phci(self, circ); } static int scsi_hba_dev_is_sid(dev_info_t *child) { /* * Use ndi_dev_is_persistent_node instead of ddi_dev_is_sid to avoid * any possible locking issues in mixed nexus devctl code (like usb). */ return (ndi_dev_is_persistent_node(child)); } /* * Called from _init() when loading "scsi" module */ void scsi_initialize_hba_interface() { SCSI_HBA_LOG((_LOG_TRACE, NULL, NULL, __func__)); /* We need "scsiprobe" and "scsinodev" as an alias or a driver. */ if (ddi_name_to_major(compatible_probe) == DDI_MAJOR_T_NONE) { SCSI_HBA_LOG((_LOG_NF(WARN), "failed to resolve '%s' " "driver alias, defaulting to 'nulldriver'", compatible_probe)); /* If no "nulldriver" driver nothing will work... */ compatible_probe = "nulldriver"; if (ddi_name_to_major(compatible_probe) == DDI_MAJOR_T_NONE) SCSI_HBA_LOG((_LOG_NF(WARN), "no probe '%s' driver, " "system misconfigured", compatible_probe)); } if (ddi_name_to_major(compatible_nodev) == DDI_MAJOR_T_NONE) { SCSI_HBA_LOG((_LOG_NF(WARN), "failed to resolve '%s' " "driver alias, defaulting to 'nulldriver'", compatible_nodev)); /* If no "nulldriver" driver nothing will work... */ compatible_nodev = "nulldriver"; if (ddi_name_to_major(compatible_nodev) == DDI_MAJOR_T_NONE) SCSI_HBA_LOG((_LOG_NF(WARN), "no nodev '%s' driver, " "system misconfigured", compatible_nodev)); } /* * Verify our special node name "probe" will not be used in other ways. * Don't expect things to work if they are. */ if (ddi_major_to_name(ddi_name_to_major("probe"))) SCSI_HBA_LOG((_LOG_NF(WARN), "driver already using special node name 'probe'")); mutex_init(&scsi_log_mutex, NULL, MUTEX_DRIVER, NULL); mutex_init(&scsi_flag_nointr_mutex, NULL, MUTEX_DRIVER, NULL); cv_init(&scsi_flag_nointr_cv, NULL, CV_DRIVER, NULL); mutex_init(&scsi_hba_log_mutex, NULL, MUTEX_DRIVER, NULL); /* initialize the asynchronous barrier deletion daemon */ mutex_init(&scsi_hba_barrier_mutex, NULL, MUTEX_DRIVER, NULL); cv_init(&scsi_hba_barrier_cv, NULL, CV_DRIVER, NULL); (void) thread_create(NULL, 0, (void (*)())scsi_hba_barrier_daemon, NULL, 0, &p0, TS_RUN, minclsyspri); /* initialize lun change ASC/ASCQ processing daemon (stage1 & stage2) */ mutex_init(&scsi_lunchg1_mutex, NULL, MUTEX_DRIVER, NULL); cv_init(&scsi_lunchg1_cv, NULL, CV_DRIVER, NULL); (void) thread_create(NULL, 0, (void (*)())scsi_lunchg1_daemon, NULL, 0, &p0, TS_RUN, minclsyspri); mutex_init(&scsi_lunchg2_mutex, NULL, MUTEX_DRIVER, NULL); cv_init(&scsi_lunchg2_cv, NULL, CV_DRIVER, NULL); (void) thread_create(NULL, 0, (void (*)())scsi_lunchg2_daemon, NULL, 0, &p0, TS_RUN, minclsyspri); } int scsi_hba_pkt_constructor(void *buf, void *arg, int kmflag) { struct scsi_pkt_cache_wrapper *pktw; struct scsi_pkt *pkt; scsi_hba_tran_t *tran = (scsi_hba_tran_t *)arg; int pkt_len; char *ptr; /* * allocate a chunk of memory for the following: * scsi_pkt * pcw_* fields * pkt_ha_private * pkt_cdbp, if needed * (pkt_private always null) * pkt_scbp, if needed */ pkt_len = tran->tran_hba_len + sizeof (struct scsi_pkt_cache_wrapper); if (tran->tran_hba_flags & SCSI_HBA_TRAN_CDB) pkt_len += DEFAULT_CDBLEN; if (tran->tran_hba_flags & SCSI_HBA_TRAN_SCB) pkt_len += DEFAULT_SCBLEN; bzero(buf, pkt_len); ptr = buf; pktw = buf; ptr += sizeof (struct scsi_pkt_cache_wrapper); pkt = &(pktw->pcw_pkt); pkt->pkt_ha_private = (opaque_t)ptr; pktw->pcw_magic = PKT_WRAPPER_MAGIC; /* alloced correctly */ /* * keep track of the granularity at the time this handle was * allocated */ pktw->pcw_granular = tran->tran_dma_attr.dma_attr_granular; if (ddi_dma_alloc_handle(tran->tran_hba_dip, &tran->tran_dma_attr, kmflag == KM_SLEEP ? SLEEP_FUNC: NULL_FUNC, NULL, &pkt->pkt_handle) != DDI_SUCCESS) { return (-1); } ptr += tran->tran_hba_len; if (tran->tran_hba_flags & SCSI_HBA_TRAN_CDB) { pkt->pkt_cdbp = (opaque_t)ptr; ptr += DEFAULT_CDBLEN; } pkt->pkt_private = NULL; if (tran->tran_hba_flags & SCSI_HBA_TRAN_SCB) pkt->pkt_scbp = (opaque_t)ptr; if (tran->tran_pkt_constructor) return ((*tran->tran_pkt_constructor)(pkt, arg, kmflag)); else return (0); } #define P_TO_TRAN(pkt) ((pkt)->pkt_address.a_hba_tran) void scsi_hba_pkt_destructor(void *buf, void *arg) { struct scsi_pkt_cache_wrapper *pktw = buf; struct scsi_pkt *pkt = &(pktw->pcw_pkt); scsi_hba_tran_t *tran = (scsi_hba_tran_t *)arg; ASSERT(pktw->pcw_magic == PKT_WRAPPER_MAGIC); ASSERT((pktw->pcw_flags & PCW_BOUND) == 0); if (tran->tran_pkt_destructor) (*tran->tran_pkt_destructor)(pkt, arg); /* make sure nobody messed with our pointers */ ASSERT(pkt->pkt_ha_private == (opaque_t)((char *)pkt + sizeof (struct scsi_pkt_cache_wrapper))); ASSERT(((tran->tran_hba_flags & SCSI_HBA_TRAN_SCB) == 0) || (pkt->pkt_scbp == (opaque_t)((char *)pkt + tran->tran_hba_len + (((tran->tran_hba_flags & SCSI_HBA_TRAN_CDB) == 0) ? 0 : DEFAULT_CDBLEN) + DEFAULT_PRIVLEN + sizeof (struct scsi_pkt_cache_wrapper)))); ASSERT(((tran->tran_hba_flags & SCSI_HBA_TRAN_CDB) == 0) || (pkt->pkt_cdbp == (opaque_t)((char *)pkt + tran->tran_hba_len + sizeof (struct scsi_pkt_cache_wrapper)))); ASSERT(pkt->pkt_handle); ddi_dma_free_handle(&pkt->pkt_handle); pkt->pkt_handle = NULL; pkt->pkt_numcookies = 0; pktw->pcw_total_xfer = 0; pktw->pcw_totalwin = 0; pktw->pcw_curwin = 0; } /* * Called by an HBA from _init() to plumb in common SCSA bus_ops and * cb_ops for the HBA's :devctl and :scsi minor nodes. */ int scsi_hba_init(struct modlinkage *modlp) { struct dev_ops *hba_dev_ops; SCSI_HBA_LOG((_LOG_TRACE, NULL, NULL, __func__)); /* * Get a pointer to the dev_ops structure of the HBA and plumb our * bus_ops vector into the HBA's dev_ops structure. */ hba_dev_ops = ((struct modldrv *)(modlp->ml_linkage[0]))->drv_dev_ops; ASSERT(hba_dev_ops->devo_bus_ops == NULL); hba_dev_ops->devo_bus_ops = &scsi_hba_busops; /* * Plumb our cb_ops vector into the HBA's dev_ops structure to * provide getinfo and hotplugging ioctl support if the HBA driver * does not already provide this support. */ if (hba_dev_ops->devo_cb_ops == NULL) { hba_dev_ops->devo_cb_ops = &scsi_hba_cbops; } if (hba_dev_ops->devo_cb_ops->cb_open == scsi_hba_open) { ASSERT(hba_dev_ops->devo_cb_ops->cb_close == scsi_hba_close); hba_dev_ops->devo_getinfo = scsi_hba_info; } return (0); } /* * Called by an HBA attach(9E) to allocate a scsi_hba_tran(9S) structure. An * HBA driver will then initialize the structure and then call * scsi_hba_attach_setup(9F). */ /*ARGSUSED*/ scsi_hba_tran_t * scsi_hba_tran_alloc( dev_info_t *self, int flags) { scsi_hba_tran_t *tran; SCSI_HBA_LOG((_LOG_TRACE, self, NULL, __func__)); /* allocate SCSA flavors for self */ ndi_flavorv_alloc(self, SCSA_NFLAVORS); tran = kmem_zalloc(sizeof (scsi_hba_tran_t), (flags & SCSI_HBA_CANSLEEP) ? KM_SLEEP : KM_NOSLEEP); if (tran) { tran->tran_interconnect_type = INTERCONNECT_PARALLEL; /* * HBA driver called scsi_hba_tran_alloc(), so tran structure * is proper size and unused/newer fields are zero. * * NOTE: We use SCSA_HBA_SCSA_TA as an obtuse form of * versioning to detect old HBA drivers that do not use * scsi_hba_tran_alloc, and would present garbage data * (instead of valid/zero data) for newer tran fields. */ tran->tran_hba_flags |= SCSI_HBA_SCSA_TA; } return (tran); } /* * Called by an HBA to free a scsi_hba_tran structure */ void scsi_hba_tran_free( scsi_hba_tran_t *tran) { SCSI_HBA_LOG((_LOG_TRACE, tran->tran_hba_dip, NULL, __func__)); kmem_free(tran, sizeof (scsi_hba_tran_t)); } int scsi_tran_ext_alloc( scsi_hba_tran_t *tran, size_t length, int flags) { void *tran_ext; int ret = DDI_FAILURE; tran_ext = kmem_zalloc(length, (flags & SCSI_HBA_CANSLEEP) ? KM_SLEEP : KM_NOSLEEP); if (tran_ext != NULL) { tran->tran_extension = tran_ext; ret = DDI_SUCCESS; } return (ret); } void scsi_tran_ext_free( scsi_hba_tran_t *tran, size_t length) { if (tran->tran_extension != NULL) { kmem_free(tran->tran_extension, length); tran->tran_extension = NULL; } } /* * Obsolete: Called by an HBA to attach an instance of the driver * Implement this older interface in terms of the new. */ /*ARGSUSED*/ int scsi_hba_attach( dev_info_t *self, ddi_dma_lim_t *hba_lim, scsi_hba_tran_t *tran, int flags, void *hba_options) { ddi_dma_attr_t hba_dma_attr; bzero(&hba_dma_attr, sizeof (ddi_dma_attr_t)); hba_dma_attr.dma_attr_burstsizes = hba_lim->dlim_burstsizes; hba_dma_attr.dma_attr_minxfer = hba_lim->dlim_minxfer; return (scsi_hba_attach_setup(self, &hba_dma_attr, tran, flags)); } /* * Common nexus teardown code: used by both scsi_hba_detach() on SCSA HBA node * and iport_postdetach_tran_scsi_device() on a SCSA HBA iport node (and for * failure cleanup). Undo scsa_nexus_setup in reverse order. * * NOTE: Since we are in the Solaris IO framework, we can depend on * undocumented cleanup operations performed by other parts of the framework: * like detach_node() calling ddi_prop_remove_all() and * ddi_remove_minor_node(,NULL). */ static void scsa_nexus_teardown(dev_info_t *self, scsi_hba_tran_t *tran) { /* Teardown FMA. */ if (tran->tran_hba_flags & SCSI_HBA_SCSA_FM) { ddi_fm_fini(self); tran->tran_hba_flags &= ~SCSI_HBA_SCSA_FM; } } /* * Common nexus setup code: used by both scsi_hba_attach_setup() on SCSA HBA * node and iport_preattach_tran_scsi_device() on a SCSA HBA iport node. * * This code makes no assumptions about tran use by scsi_device children. */ static int scsa_nexus_setup(dev_info_t *self, scsi_hba_tran_t *tran) { int capable; int scsa_minor; /* * NOTE: SCSA maintains an 'fm-capable' domain, in tran_fm_capable, * that is not dependent (limited by) the capabilities of its parents. * For example a devinfo node in a branch that is not * DDI_FM_EREPORT_CAPABLE may report as capable, via tran_fm_capable, * to its scsi_device children. * * Get 'fm-capable' property from driver.conf, if present. If not * present, default to the scsi_fm_capable global (which has * DDI_FM_EREPORT_CAPABLE set by default). */ if (tran->tran_fm_capable == DDI_FM_NOT_CAPABLE) tran->tran_fm_capable = ddi_prop_get_int(DDI_DEV_T_ANY, self, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "fm-capable", scsi_fm_capable); /* * If an HBA is *not* doing its own fma support by calling * ddi_fm_init() prior to scsi_hba_attach_setup(), we provide a minimal * common SCSA implementation so that scsi_device children can generate * ereports via scsi_fm_ereport_post(). We use ddi_fm_capable() to * detect an HBA calling ddi_fm_init() prior to scsi_hba_attach_setup(). */ if (tran->tran_fm_capable && (ddi_fm_capable(self) == DDI_FM_NOT_CAPABLE)) { /* * We are capable of something, pass our capabilities up the * tree, but use a local variable so our parent can't limit * our capabilities (we don't want our parent to clear * DDI_FM_EREPORT_CAPABLE). * * NOTE: iblock cookies are not important because scsi HBAs * always interrupt below LOCK_LEVEL. */ capable = tran->tran_fm_capable; ddi_fm_init(self, &capable, NULL); /* * Set SCSI_HBA_SCSA_FM bit to mark us as using the common * minimal SCSA fm implementation - we called ddi_fm_init(), * so we are responsible for calling ddi_fm_fini() in * scsi_hba_detach(). * * NOTE: if ddi_fm_init fails to establish handle, SKIP cleanup. */ if (DEVI(self)->devi_fmhdl) tran->tran_hba_flags |= SCSI_HBA_SCSA_FM; } /* If SCSA responsible for for minor nodes, create :devctl minor. */ scsa_minor = (ddi_get_driver(self)->devo_cb_ops->cb_open == scsi_hba_open) ? 1 : 0; if (scsa_minor && ((ddi_create_minor_node(self, "devctl", S_IFCHR, INST2DEVCTL(ddi_get_instance(self)), DDI_NT_SCSI_NEXUS, 0) != DDI_SUCCESS))) { SCSI_HBA_LOG((_LOG(WARN), self, NULL, "can't create :devctl minor node")); goto fail; } return (DDI_SUCCESS); fail: scsa_nexus_teardown(self, tran); return (DDI_FAILURE); } /* * Common tran teardown code: used by iport_postdetach_tran_scsi_device() on a * SCSA HBA iport node and (possibly) by scsi_hba_detach() on SCSA HBA node * (and for failure cleanup). Undo scsa_tran_setup in reverse order. * * NOTE: Since we are in the Solaris IO framework, we can depend on * undocumented cleanup operations performed by other parts of the framework: * like detach_node() calling ddi_prop_remove_all() and * ddi_remove_minor_node(,NULL). */ static void scsa_tran_teardown(dev_info_t *self, scsi_hba_tran_t *tran) { tran->tran_iport_dip = NULL; /* Teardown pHCI registration */ if (tran->tran_hba_flags & SCSI_HBA_SCSA_PHCI) { (void) mdi_phci_unregister(self, 0); tran->tran_hba_flags &= ~SCSI_HBA_SCSA_PHCI; } } /* * Common tran setup code: used by iport_preattach_tran_scsi_device() on a * SCSA HBA iport node and (possibly) by scsi_hba_attach_setup() on SCSA HBA * node. */ static int scsa_tran_setup(dev_info_t *self, scsi_hba_tran_t *tran) { int scsa_minor; int id; char *scsi_binding_set; static const char *interconnect[] = INTERCONNECT_TYPE_ASCII; SCSI_HBA_LOG((_LOG_TRACE, self, NULL, __func__)); /* If SCSA responsible for for minor nodes, create ":scsi" */ scsa_minor = (ddi_get_driver(self)->devo_cb_ops->cb_open == scsi_hba_open) ? 1 : 0; if (scsa_minor && (ddi_create_minor_node(self, "scsi", S_IFCHR, INST2SCSI(ddi_get_instance(self)), DDI_NT_SCSI_ATTACHMENT_POINT, 0) != DDI_SUCCESS)) { SCSI_HBA_LOG((_LOG(WARN), self, NULL, "can't create :scsi minor node")); goto fail; } /* * If the property does not already exist on self then see if we can * pull it from further up the tree and define it on self. If the * property does not exist above (including options.conf) then use the * default value specified (global variable). We pull things down from * above for faster "DDI_PROP_NOTPROM | DDI_PROP_DONTPASS" runtime * access. * * Future: Should we avoid creating properties when value == global? */ #define CONFIG_INT_PROP(s, p, dv) { \ if ((ddi_prop_exists(DDI_DEV_T_ANY, s, \ DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, p) == 0) && \ (ndi_prop_update_int(DDI_DEV_T_NONE, s, p, \ ddi_prop_get_int(DDI_DEV_T_ANY, ddi_get_parent(s), \ DDI_PROP_NOTPROM, p, dv)) != DDI_PROP_SUCCESS)) \ SCSI_HBA_LOG((_LOG(WARN), NULL, s, \ "can't create property '%s'", p)); \ } /* Decorate with scsi configuration properties */ CONFIG_INT_PROP(self, "scsi-enumeration", scsi_enumeration); CONFIG_INT_PROP(self, "scsi-options", scsi_options); CONFIG_INT_PROP(self, "scsi-reset-delay", scsi_reset_delay); CONFIG_INT_PROP(self, "scsi-watchdog-tick", scsi_watchdog_tick); CONFIG_INT_PROP(self, "scsi-selection-timeout", scsi_selection_timeout); CONFIG_INT_PROP(self, "scsi-tag-age-limit", scsi_tag_age_limit); /* * Pull down the scsi-initiator-id from further up the tree, or as * defined by OBP. Place on node for faster access. NOTE: there is * some confusion about what the name of the property should be. */ id = ddi_prop_get_int(DDI_DEV_T_ANY, self, 0, "initiator-id", -1); if (id == -1) id = ddi_prop_get_int(DDI_DEV_T_ANY, self, 0, "scsi-initiator-id", -1); if (id != -1) CONFIG_INT_PROP(self, "scsi-initiator-id", id); /* * If we are responsible for tran allocation, establish * 'initiator-interconnect-type'. */ if ((tran->tran_hba_flags & SCSI_HBA_SCSA_TA) && (tran->tran_interconnect_type > 0) && (tran->tran_interconnect_type < INTERCONNECT_MAX)) { if (ndi_prop_update_string(DDI_DEV_T_NONE, self, "initiator-interconnect-type", (char *)interconnect[tran->tran_interconnect_type]) != DDI_PROP_SUCCESS) { SCSI_HBA_LOG((_LOG(WARN), self, NULL, "failed to establish " "'initiator-interconnect-type'")); goto fail; } } /* * The 'scsi-binding-set' property can be defined in driver.conf * files of legacy drivers on an as-needed basis. If 'scsi-binding-set' * is not driver.conf defined, and the HBA is not implementing its own * private bus_config, we define scsi-binding-set to the default * 'spi' legacy value. * * NOTE: This default 'spi' value will be deleted if an HBA driver * ends up using the scsi_hba_tgtmap_create() enumeration services. * * NOTE: If we were ever to decide to derive 'scsi-binding-set' from * the IEEE-1275 'device_type' property then this is where that code * should go - there is not enough consistency in 'device_type' to do * this correctly at this point in time. */ if (ddi_prop_lookup_string(DDI_DEV_T_ANY, self, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "scsi-binding-set", &scsi_binding_set) == DDI_PROP_SUCCESS) { SCSI_HBA_LOG((_LOG(2), NULL, self, "external 'scsi-binding-set' \"%s\"", scsi_binding_set)); ddi_prop_free(scsi_binding_set); } else if (scsi_binding_set_spi && ((tran->tran_bus_config == NULL) || (tran->tran_bus_config == scsi_hba_bus_config_spi))) { if (ndi_prop_update_string(DDI_DEV_T_NONE, self, "scsi-binding-set", scsi_binding_set_spi) != DDI_PROP_SUCCESS) { SCSI_HBA_LOG((_LOG(WARN), self, NULL, "failed to establish 'scsi_binding_set' default")); goto fail; } SCSI_HBA_LOG((_LOG(2), NULL, self, "default 'scsi-binding-set' \"%s\"", scsi_binding_set_spi)); } else SCSI_HBA_LOG((_LOG(2), NULL, self, "no 'scsi-binding-set'")); /* * If SCSI_HBA_TRAN_PHCI is set, take care of pHCI registration of the * initiator. */ if ((tran->tran_hba_flags & SCSI_HBA_TRAN_PHCI) && (mdi_phci_register(MDI_HCI_CLASS_SCSI, self, 0) == MDI_SUCCESS)) tran->tran_hba_flags |= SCSI_HBA_SCSA_PHCI; /* NOTE: tran_hba_dip is for DMA operation at the HBA node level */ tran->tran_iport_dip = self; /* for iport association */ return (DDI_SUCCESS); fail: scsa_tran_teardown(self, tran); return (DDI_FAILURE); } /* * Called by a SCSA HBA driver to attach an instance of the driver to * SCSA HBA node enumerated by PCI. */ int scsi_hba_attach_setup( dev_info_t *self, ddi_dma_attr_t *hba_dma_attr, scsi_hba_tran_t *tran, int flags) { int len; char cache_name[96]; SCSI_HBA_LOG((_LOG_TRACE, self, NULL, __func__)); /* * Verify that we are a driver so other code does not need to * check for NULL ddi_get_driver() result. */ if (ddi_get_driver(self) == NULL) return (DDI_FAILURE); /* * Verify that we are called on a SCSA HBA node (function enumerated * by PCI), not on an iport node. */ ASSERT(scsi_hba_iport_unit_address(self) == NULL); if (scsi_hba_iport_unit_address(self)) return (DDI_FAILURE); /* self can't be an iport */ /* Caller must provide the tran. */ ASSERT(tran); if (tran == NULL) return (DDI_FAILURE); /* * Verify correct scsi_hba_tran_t form: * * o Both or none of tran_get_name/tran_get_addr. * NOTE: Older SCSA HBA drivers for SCSI transports with addressing * that did not fit the SPI "struct scsi_address" model were required * to implement tran_get_name and tran_get_addr. This is no longer * true - modern transport drivers should now use common SCSA * enumeration services. The SCSA enumeration code will represent * the unit-address using well-known address properties * (SCSI_ADDR_PROP_TARGET_PORT, SCSI_ADDR_PROP_LUN64) during * devinfo/pathinfo node creation. The HBA driver can obtain values * using scsi_device_prop_lookup_*() from its tran_tgt_init(9E). * */ if ((tran->tran_get_name == NULL) ^ (tran->tran_get_bus_addr == NULL)) { SCSI_HBA_LOG((_LOG(WARN), self, NULL, "should support both or neither: " "tran_get_name, tran_get_bus_addr")); return (DDI_FAILURE); } /* * Establish the devinfo context of this tran structure, preserving * knowledge of how the tran was allocated. */ tran->tran_hba_dip = self; /* for DMA */ tran->tran_hba_flags = (flags & ~SCSI_HBA_SCSA_TA) | (tran->tran_hba_flags & SCSI_HBA_SCSA_TA); /* Establish flavor of transport (and ddi_get_driver_private()) */ ndi_flavorv_set(self, SCSA_FLAVOR_SCSI_DEVICE, tran); /* * Note: We only need dma_attr_minxfer and dma_attr_burstsizes * from the DMA attributes. scsi_hba_attach(9f) only guarantees * that these two fields are initialized properly. If this * changes, be sure to revisit the implementation of * scsi_hba_attach(9F). */ (void) memcpy(&tran->tran_dma_attr, hba_dma_attr, sizeof (ddi_dma_attr_t)); /* Create tran_setup_pkt(9E) kmem_cache. */ if (tran->tran_setup_pkt) { ASSERT(tran->tran_init_pkt == NULL); ASSERT(tran->tran_destroy_pkt == NULL); if (tran->tran_init_pkt || tran->tran_destroy_pkt) goto fail; tran->tran_init_pkt = scsi_init_cache_pkt; tran->tran_destroy_pkt = scsi_free_cache_pkt; tran->tran_sync_pkt = scsi_sync_cache_pkt; tran->tran_dmafree = scsi_cache_dmafree; len = sizeof (struct scsi_pkt_cache_wrapper); len += ROUNDUP(tran->tran_hba_len); if (tran->tran_hba_flags & SCSI_HBA_TRAN_CDB) len += ROUNDUP(DEFAULT_CDBLEN); if (tran->tran_hba_flags & SCSI_HBA_TRAN_SCB) len += ROUNDUP(DEFAULT_SCBLEN); (void) snprintf(cache_name, sizeof (cache_name), "pkt_cache_%s_%d", ddi_driver_name(self), ddi_get_instance(self)); tran->tran_pkt_cache_ptr = kmem_cache_create( cache_name, len, 8, scsi_hba_pkt_constructor, scsi_hba_pkt_destructor, NULL, tran, NULL, 0); } /* Perform node setup independent of initiator role */ if (scsa_nexus_setup(self, tran) != DDI_SUCCESS) goto fail; /* * The SCSI_HBA_HBA flag is passed to scsi_hba_attach_setup when the * HBA driver knows that *all* children of the SCSA HBA node will be * 'iports'. If the SCSA HBA node can have iport children and also * function as an initiator for xxx_device children then it should * not specify SCSI_HBA_HBA in its scsi_hba_attach_setup call. An * HBA driver that does not manage iports should not set SCSA_HBA_HBA. */ if (tran->tran_hba_flags & SCSI_HBA_HBA) { /* * Set the 'ddi-config-driver-node' property on the nexus * node that notify attach_driver_nodes() to configure all * immediate children so that nodes which bind to the * same driver as parent are able to be added into per-driver * list. */ if (ndi_prop_create_boolean(DDI_DEV_T_NONE, self, "ddi-config-driver-node") != DDI_PROP_SUCCESS) goto fail; } else { if (scsa_tran_setup(self, tran) != DDI_SUCCESS) goto fail; } return (DDI_SUCCESS); fail: (void) scsi_hba_detach(self); return (DDI_FAILURE); } /* * Called by an HBA to detach an instance of the driver. This may be called * for SCSA HBA nodes and for SCSA iport nodes. */ int scsi_hba_detach(dev_info_t *self) { scsi_hba_tran_t *tran; ASSERT(scsi_hba_iport_unit_address(self) == NULL); if (scsi_hba_iport_unit_address(self)) return (DDI_FAILURE); /* self can't be an iport */ /* Check all error return conditions upfront */ tran = ndi_flavorv_get(self, SCSA_FLAVOR_SCSI_DEVICE); ASSERT(tran); if (tran == NULL) return (DDI_FAILURE); ASSERT(tran->tran_open_flag == 0); if (tran->tran_open_flag) return (DDI_FAILURE); if (!(tran->tran_hba_flags & SCSI_HBA_HBA)) scsa_tran_teardown(self, tran); scsa_nexus_teardown(self, tran); /* Teardown tran_setup_pkt(9E) kmem_cache. */ if (tran->tran_pkt_cache_ptr) { kmem_cache_destroy(tran->tran_pkt_cache_ptr); tran->tran_pkt_cache_ptr = NULL; } (void) memset(&tran->tran_dma_attr, 0, sizeof (ddi_dma_attr_t)); /* Teardown flavor of transport (and ddi_get_driver_private()) */ ndi_flavorv_set(self, SCSA_FLAVOR_SCSI_DEVICE, NULL); tran->tran_hba_dip = NULL; return (DDI_SUCCESS); } /* * Called by an HBA from _fini() */ void scsi_hba_fini(struct modlinkage *modlp) { struct dev_ops *hba_dev_ops; SCSI_HBA_LOG((_LOG_TRACE, NULL, NULL, __func__)); /* Get the devops structure of this module and clear bus_ops vector. */ hba_dev_ops = ((struct modldrv *)(modlp->ml_linkage[0]))->drv_dev_ops; if (hba_dev_ops->devo_cb_ops == &scsi_hba_cbops) hba_dev_ops->devo_cb_ops = NULL; if (hba_dev_ops->devo_getinfo == scsi_hba_info) hba_dev_ops->devo_getinfo = NULL; hba_dev_ops->devo_bus_ops = (struct bus_ops *)NULL; } /* * SAS specific functions */ smp_hba_tran_t * smp_hba_tran_alloc(dev_info_t *self) { /* allocate SCSA flavors for self */ ndi_flavorv_alloc(self, SCSA_NFLAVORS); return (kmem_zalloc(sizeof (smp_hba_tran_t), KM_SLEEP)); } void smp_hba_tran_free(smp_hba_tran_t *tran) { kmem_free(tran, sizeof (smp_hba_tran_t)); } int smp_hba_attach_setup( dev_info_t *self, smp_hba_tran_t *tran) { ASSERT(scsi_hba_iport_unit_address(self) == NULL); if (scsi_hba_iport_unit_address(self)) return (DDI_FAILURE); /* self can't be an iport */ /* * The owner of the this devinfo_t was responsible * for informing the framework already about * additional flavors. */ ndi_flavorv_set(self, SCSA_FLAVOR_SMP, tran); return (DDI_SUCCESS); } int smp_hba_detach(dev_info_t *self) { ASSERT(scsi_hba_iport_unit_address(self) == NULL); if (scsi_hba_iport_unit_address(self)) return (DDI_FAILURE); /* self can't be an iport */ ndi_flavorv_set(self, SCSA_FLAVOR_SMP, NULL); return (DDI_SUCCESS); } /* * SMP child flavored functions */ static int smp_busctl_ua(dev_info_t *child, char *addr, int maxlen) { char *tport; char *wwn; /* limit ndi_devi_findchild_by_callback to expected flavor */ if (ndi_flavor_get(child) != SCSA_FLAVOR_SMP) return (DDI_FAILURE); if (ddi_prop_lookup_string(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, SCSI_ADDR_PROP_TARGET_PORT, &tport) == DDI_SUCCESS) { (void) snprintf(addr, maxlen, "%s", tport); ddi_prop_free(tport); return (DDI_SUCCESS); } /* * NOTE: the following code should be deleted when mpt is changed to * use SCSI_ADDR_PROP_TARGET_PORT instead of SMP_WWN. */ if (ddi_prop_lookup_string(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, SMP_WWN, &wwn) == DDI_SUCCESS) { (void) snprintf(addr, maxlen, "w%s", wwn); ddi_prop_free(wwn); return (DDI_SUCCESS); } return (DDI_FAILURE); } static int smp_busctl_reportdev(dev_info_t *child) { dev_info_t *self = ddi_get_parent(child); char *tport; char *wwn; if (ddi_prop_lookup_string(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, SCSI_ADDR_PROP_TARGET_PORT, &tport) == DDI_SUCCESS) { SCSI_HBA_LOG((_LOG_NF(CONT), "?%s%d at %s%d: target-port %s", ddi_driver_name(child), ddi_get_instance(child), ddi_driver_name(self), ddi_get_instance(self), tport)); ddi_prop_free(tport); return (DDI_SUCCESS); } /* * NOTE: the following code should be deleted when mpt is changed to * use SCSI_ADDR_PROP_TARGET_PORT instead of SMP_WWN. */ if (ddi_prop_lookup_string(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, SMP_WWN, &wwn) == DDI_SUCCESS) { SCSI_HBA_LOG((_LOG_NF(CONT), "?%s%d at %s%d: wwn %s", ddi_driver_name(child), ddi_get_instance(child), ddi_driver_name(self), ddi_get_instance(self), wwn)); ddi_prop_free(wwn); return (DDI_SUCCESS); } return (DDI_FAILURE); } static int smp_busctl_initchild(dev_info_t *child) { dev_info_t *self = ddi_get_parent(child); smp_hba_tran_t *tran; dev_info_t *dup; char addr[SCSI_MAXNAMELEN]; struct smp_device *smp_sd; uint64_t wwn; tran = ndi_flavorv_get(self, SCSA_FLAVOR_SMP); ASSERT(tran); if (tran == NULL) return (DDI_FAILURE); if (smp_busctl_ua(child, addr, sizeof (addr)) != DDI_SUCCESS) return (DDI_NOT_WELL_FORMED); if (scsi_wwnstr_to_wwn(addr, &wwn)) return (DDI_NOT_WELL_FORMED); /* Prevent duplicate nodes. */ dup = ndi_devi_findchild_by_callback(self, ddi_node_name(child), addr, smp_busctl_ua); if (dup) { ASSERT(ndi_flavor_get(dup) == SCSA_FLAVOR_SMP); if (ndi_flavor_get(dup) != SCSA_FLAVOR_SMP) { SCSI_HBA_LOG((_LOG(1), NULL, child, "init failed: %s@%s: not SMP flavored", ddi_node_name(child), addr)); return (DDI_FAILURE); } if (dup != child) { SCSI_HBA_LOG((_LOG(4), NULL, child, "init failed: %s@%s: detected duplicate %p", ddi_node_name(child), addr, (void *)dup)); return (DDI_FAILURE); } } /* set the node @addr string */ ddi_set_name_addr(child, addr); /* Allocate and initialize smp_device. */ smp_sd = kmem_zalloc(sizeof (struct smp_device), KM_SLEEP); smp_sd->smp_sd_dev = child; smp_sd->smp_sd_address.smp_a_hba_tran = tran; bcopy(&wwn, smp_sd->smp_sd_address.smp_a_wwn, SAS_WWN_BYTE_SIZE); ddi_set_driver_private(child, smp_sd); if (tran->smp_tran_init && ((*tran->smp_tran_init)(self, child, tran, smp_sd) != DDI_SUCCESS)) { kmem_free(smp_sd, sizeof (struct smp_device)); scsi_enumeration_failed(child, -1, NULL, "smp_tran_init"); ddi_set_driver_private(child, NULL); ddi_set_name_addr(child, NULL); return (DDI_FAILURE); } return (DDI_SUCCESS); } /*ARGSUSED*/ static int smp_busctl_uninitchild(dev_info_t *child) { dev_info_t *self = ddi_get_parent(child); struct smp_device *smp_sd = ddi_get_driver_private(child); smp_hba_tran_t *tran; tran = ndi_flavorv_get(self, SCSA_FLAVOR_SMP); ASSERT(smp_sd && tran); if ((smp_sd == NULL) || (tran == NULL)) return (DDI_FAILURE); if (tran->smp_tran_free) (*tran->smp_tran_free) (self, child, tran, smp_sd); kmem_free(smp_sd, sizeof (*smp_sd)); ddi_set_driver_private(child, NULL); ddi_set_name_addr(child, NULL); return (DDI_SUCCESS); } /* Find an "smp" child at the specified address. */ static dev_info_t * smp_findchild(dev_info_t *self, char *addr) { dev_info_t *child; /* Search "smp" devinfo child at specified address. */ ASSERT(self && DEVI_BUSY_OWNED(self) && addr); for (child = ddi_get_child(self); child; child = ddi_get_next_sibling(child)) { /* skip non-"smp" nodes */ if (ndi_flavor_get(child) != SCSA_FLAVOR_SMP) continue; /* Attempt initchild to establish unit-address */ if (i_ddi_node_state(child) < DS_INITIALIZED) (void) ddi_initchild(self, child); /* Verify state and non-NULL unit-address. */ if ((i_ddi_node_state(child) < DS_INITIALIZED) || (ddi_get_name_addr(child) == NULL)) continue; /* Return "smp" child if unit-address matches. */ if (strcmp(ddi_get_name_addr(child), addr) == 0) return (child); } return (NULL); } /* * Search for "smp" child of self at the specified address. If found, online * and return with a hold. Unlike general SCSI configuration, we can assume * the the device is actually there when we are called (i.e., device is * created by hotplug, not by bus_config). */ int smp_hba_bus_config(dev_info_t *self, char *addr, dev_info_t **childp) { dev_info_t *child; int circ; ASSERT(self && addr && childp); *childp = NULL; /* Search for "smp" child. */ scsi_hba_devi_enter(self, &circ); if ((child = smp_findchild(self, addr)) == NULL) { scsi_hba_devi_exit(self, circ); return (NDI_FAILURE); } /* Attempt online. */ if (ndi_devi_online(child, 0) != NDI_SUCCESS) { scsi_hba_devi_exit(self, circ); return (NDI_FAILURE); } /* On success, return with active hold. */ ndi_hold_devi(child); scsi_hba_devi_exit(self, circ); *childp = child; return (NDI_SUCCESS); } /* Create "smp" child devinfo node at specified unit-address. */ int smp_hba_bus_config_taddr(dev_info_t *self, char *addr) { dev_info_t *child; int circ; /* * NOTE: If we ever uses a generic node name (.vs. a driver name) * or define a 'compatible' property, this code will need to use * a 'probe' node (ala scsi_device support) to obtain identity * information from the device. */ /* Search for "smp" child. */ scsi_hba_devi_enter(self, &circ); child = smp_findchild(self, addr); if (child) { /* Child exists, note if this was a new reinsert. */ if (ndi_devi_device_insert(child)) SCSI_HBA_LOG((_LOGCFG, self, NULL, "devinfo smp@%s device_reinsert", addr)); scsi_hba_devi_exit(self, circ); return (NDI_SUCCESS); } /* Allocate "smp" child devinfo node and establish flavor of child. */ ndi_devi_alloc_sleep(self, "smp", DEVI_SID_HP_NODEID, &child); ASSERT(child); ndi_flavor_set(child, SCSA_FLAVOR_SMP); /* Add unit-address property to child. */ if (ndi_prop_update_string(DDI_DEV_T_NONE, child, SCSI_ADDR_PROP_TARGET_PORT, addr) != DDI_PROP_SUCCESS) { (void) ndi_devi_free(child); scsi_hba_devi_exit(self, circ); return (NDI_FAILURE); } /* Attempt to online the new "smp" node. */ (void) ndi_devi_online(child, 0); scsi_hba_devi_exit(self, circ); return (NDI_SUCCESS); } /* * Wrapper to scsi_ua_get which takes a devinfo argument instead of a * scsi_device structure. */ static int scsi_busctl_ua(dev_info_t *child, char *addr, int maxlen) { struct scsi_device *sd; /* limit ndi_devi_findchild_by_callback to expected flavor */ if (ndi_flavor_get(child) != SCSA_FLAVOR_SCSI_DEVICE) return (DDI_FAILURE); /* nodes are named by tran_get_name or default "tgt,lun" */ sd = ddi_get_driver_private(child); if (sd && (scsi_ua_get(sd, addr, maxlen) == 1)) return (DDI_SUCCESS); return (DDI_FAILURE); } static int scsi_busctl_reportdev(dev_info_t *child) { dev_info_t *self = ddi_get_parent(child); struct scsi_device *sd = ddi_get_driver_private(child); scsi_hba_tran_t *tran; char ua[SCSI_MAXNAMELEN]; char ra[SCSI_MAXNAMELEN]; SCSI_HBA_LOG((_LOG_TRACE, NULL, child, __func__)); tran = ndi_flavorv_get(self, SCSA_FLAVOR_SCSI_DEVICE); ASSERT(tran && sd); if ((tran == NULL) || (sd == NULL)) return (DDI_FAILURE); /* get the unit_address and bus_addr information */ if ((scsi_ua_get(sd, ua, sizeof (ua)) == 0) || (scsi_ua_get_reportdev(sd, ra, sizeof (ra)) == 0)) { SCSI_HBA_LOG((_LOG(WARN), NULL, child, "REPORTDEV failure")); return (DDI_FAILURE); } if (tran->tran_get_name == NULL) SCSI_HBA_LOG((_LOG_NF(CONT), "?%s%d at %s%d: %s", ddi_driver_name(child), ddi_get_instance(child), ddi_driver_name(self), ddi_get_instance(self), ra)); else if (*ra) SCSI_HBA_LOG((_LOG_NF(CONT), "?%s%d at %s%d: unit-address %s: %s", ddi_driver_name(child), ddi_get_instance(child), ddi_driver_name(self), ddi_get_instance(self), ua, ra)); else SCSI_HBA_LOG((_LOG_NF(CONT), "?%s%d at %s%d: unit-address %s", ddi_driver_name(child), ddi_get_instance(child), ddi_driver_name(self), ddi_get_instance(self), ua)); return (DDI_SUCCESS); } /* * scsi_busctl_initchild is called to initialize the SCSA transport for * communication with a particular child scsi target device. Successful * initialization requires properties on the node which describe the address * of the target device. If the address of the target device can't be * determined from properties then DDI_NOT_WELL_FORMED is returned. Nodes that * are DDI_NOT_WELL_FORMED are considered an implementation artifact and * are hidden from devinfo snapshots by calling ndi_devi_set_hidden(). * The child may be one of the following types of devinfo nodes: * * OBP node: * OBP does not enumerate target devices attached a SCSI bus. These * template/stub/wild-card nodes are a legacy artifact for support of old * driver loading methods. Since they have no properties, * DDI_NOT_WELL_FORMED will be returned. * * SID node: * The node may be either a: * o probe/barrier SID node * o a dynamic SID target node * * driver.conf node: The situation for this nexus is different than most. * Typically a driver.conf node definition is used to either define a * new child devinfo node or to further decorate (via merge) a SID * child with properties. In our case we use the nodes for *both* * purposes. * * In both the SID node and driver.conf node cases we must form the nodes * "@addr" from the well-known scsi(9P) device unit-address properties on * the node. * * For HBA drivers that implement the deprecated tran_get_name interface, * "@addr" construction involves having that driver interpret properties via * scsi_busctl_ua -> scsi_ua_get -> tran_get_name: there is no * requirement for the property names to be well-known. * * NOTE: We don't currently support "merge". When this support is added a * specific property, like "unit-address", should *always* identify a * driver.conf node that needs to be merged into a specific SID node. When * enumeration is enabled, a .conf node without the "unit-address" property * should be ignored. The best way to establish the "unit-address" property * would be to have the system assign parent= and unit-address= from an * instance=# driver.conf entry (by using the instance tree). */ static int scsi_busctl_initchild(dev_info_t *child) { dev_info_t *self = ddi_get_parent(child); dev_info_t *dup; scsi_hba_tran_t *tran; struct scsi_device *sd; scsi_hba_tran_t *tran_clone; char *class; int tgt; int lun; int sfunc; int err = DDI_FAILURE; char addr[SCSI_MAXNAMELEN]; ASSERT(DEVI_BUSY_OWNED(self)); SCSI_HBA_LOG((_LOG(4), NULL, child, "init begin")); /* * For a driver like fp with multiple upper-layer-protocols * it is possible for scsi_hba_init in _init to plumb SCSA * and have the load of fcp (which does scsi_hba_attach_setup) * to fail. In this case we may get here with a NULL hba. */ tran = ndi_flavorv_get(self, SCSA_FLAVOR_SCSI_DEVICE); if (tran == NULL) return (DDI_NOT_WELL_FORMED); /* * OBP may create template/stub/wild-card nodes for legacy driver * loading methods. These nodes have no properties, so we lack the * addressing properties to initchild them. Hide the node and return * DDI_NOT_WELL_FORMED. * * Future: define/use a ndi_devi_has_properties(dip) type interface. * * NOTE: It would be nice if we could delete these ill formed nodes by * implementing a DDI_NOT_WELL_FORMED_DELETE return code. This can't * be done until leadville debug code removes its dependencies * on the devinfo still being present after a failed ndi_devi_online. */ if ((DEVI(child)->devi_hw_prop_ptr == NULL) && (DEVI(child)->devi_drv_prop_ptr == NULL) && (DEVI(child)->devi_sys_prop_ptr == NULL)) { SCSI_HBA_LOG((_LOG(4), NULL, child, "init failed: no properties")); ndi_devi_set_hidden(child); return (DDI_NOT_WELL_FORMED); } /* get legacy SPI addressing properties */ if ((tgt = ddi_prop_get_int(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, SCSI_ADDR_PROP_TARGET, -1)) == -1) { tgt = 0; /* * A driver.conf node for merging always has a target= property, * even if it is just a dummy that does not contain the real * target address. However drivers that register devids may * create stub driver.conf nodes without a target= property so * that pathological devid resolution works. Hide the stub * node and return DDI_NOT_WELL_FORMED. */ if (!scsi_hba_dev_is_sid(child)) { SCSI_HBA_LOG((_LOG(4), NULL, child, "init failed: stub .conf node")); ndi_devi_set_hidden(child); return (DDI_NOT_WELL_FORMED); } } lun = ddi_prop_get_int(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, SCSI_ADDR_PROP_LUN, 0); sfunc = ddi_prop_get_int(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, SCSI_ADDR_PROP_SFUNC, -1); /* * The scsi_address structure may not specify all the addressing * information. For an old HBA that doesn't support tran_get_name * (most pre-SCSI-3 HBAs) the scsi_address structure is still used, * so the target property must exist and the LUN must be < 256. */ if ((tran->tran_get_name == NULL) && ((tgt >= USHRT_MAX) || (lun >= 256))) { SCSI_HBA_LOG((_LOG(1), NULL, child, "init failed: illegal/missing properties")); ndi_devi_set_hidden(child); return (DDI_NOT_WELL_FORMED); } /* * We need to initialize a fair amount of our environment to invoke * tran_get_name (via scsi_busctl_ua and scsi_ua_get) to * produce the "@addr" name from addressing properties. Allocate and * initialize scsi device structure. */ sd = kmem_zalloc(sizeof (struct scsi_device), KM_SLEEP); mutex_init(&sd->sd_mutex, NULL, MUTEX_DRIVER, NULL); sd->sd_dev = child; sd->sd_pathinfo = NULL; sd->sd_uninit_prevent = 0; ddi_set_driver_private(child, sd); if (tran->tran_hba_flags & SCSI_HBA_ADDR_COMPLEX) { /* * For a SCSI_HBA_ADDR_COMPLEX transport we store a pointer to * scsi_device in the scsi_address structure. This allows an * HBA driver to find its per-scsi_device private data * (accessible to the HBA given just the scsi_address by using * scsi_address_device(9F)/scsi_device_hba_private_get(9F)). */ sd->sd_address.a.a_sd = sd; tran_clone = NULL; } else { /* * Initialize the scsi_address so that a SCSI-2 target driver * talking to a SCSI-2 device on a SCSI-3 bus (spi) continues * to work. We skew the secondary function value so that we * can tell from the address structure if we are processing * a secondary function request. */ sd->sd_address.a_target = (ushort_t)tgt; sd->sd_address.a_lun = (uchar_t)lun; if (sfunc == -1) sd->sd_address.a_sublun = (uchar_t)0; else sd->sd_address.a_sublun = (uchar_t)sfunc + 1; /* * NOTE: Don't limit LUNs to scsi_options value because a * scsi_device discovered via SPI dynamic enumeration might * still support SCMD_REPORT_LUNS. */ /* * Deprecated: Use SCSI_HBA_ADDR_COMPLEX: * Clone transport structure if requested. Cloning allows * an HBA to maintain target-specific information if * necessary, such as target addressing information that * does not adhere to the scsi_address structure format. */ if (tran->tran_hba_flags & SCSI_HBA_TRAN_CLONE) { tran_clone = kmem_alloc( sizeof (scsi_hba_tran_t), KM_SLEEP); bcopy((caddr_t)tran, (caddr_t)tran_clone, sizeof (scsi_hba_tran_t)); tran = tran_clone; tran->tran_sd = sd; } else { tran_clone = NULL; ASSERT(tran->tran_sd == NULL); } } /* establish scsi_address pointer to the HBA's tran structure */ sd->sd_address.a_hba_tran = tran; /* * This is a grotty hack that allows direct-access (non-scsa) drivers * (like chs, ata, and mlx which all make cmdk children) to put its * own vector in the 'a_hba_tran' field. When all the drivers that do * this are fixed, please remove this hack. * * NOTE: This hack is also shows up in the DEVP_TO_TRAN implementation * in scsi_confsubr.c. */ sd->sd_tran_safe = tran; /* * If the class property is not already established, set it to "scsi". * This is done so that parent= driver.conf nodes have class. */ if (ddi_prop_lookup_string(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "class", &class) == DDI_PROP_SUCCESS) { ddi_prop_free(class); } else if (ndi_prop_update_string(DDI_DEV_T_NONE, child, "class", "scsi") != DDI_PROP_SUCCESS) { SCSI_HBA_LOG((_LOG(2), NULL, child, "init failed: class")); ndi_devi_set_hidden(child); err = DDI_NOT_WELL_FORMED; goto failure; } /* Establish the @addr name of the child. */ *addr = '\0'; if (scsi_busctl_ua(child, addr, sizeof (addr)) != DDI_SUCCESS) { /* * Some driver.conf files add bogus target properties (relative * to their nexus representation of target) to their stub * nodes, causing the check above to not filter them. */ SCSI_HBA_LOG((_LOG(3), NULL, child, "init failed: scsi_busctl_ua call")); ndi_devi_set_hidden(child); err = DDI_NOT_WELL_FORMED; goto failure; } if (*addr == '\0') { SCSI_HBA_LOG((_LOG(2), NULL, child, "init failed: ua")); ndi_devi_set_hidden(child); err = DDI_NOT_WELL_FORMED; goto failure; } /* Prevent duplicate nodes. */ dup = ndi_devi_findchild_by_callback(self, ddi_node_name(child), addr, scsi_busctl_ua); if (dup) { ASSERT(ndi_flavor_get(dup) == SCSA_FLAVOR_SCSI_DEVICE); if (ndi_flavor_get(dup) != SCSA_FLAVOR_SCSI_DEVICE) { SCSI_HBA_LOG((_LOG(1), NULL, child, "init failed: %s@%s: not SCSI_DEVICE flavored", ddi_node_name(child), addr)); goto failure; } if (dup != child) { SCSI_HBA_LOG((_LOG(4), NULL, child, "init failed: %s@%s: detected duplicate %p", ddi_node_name(child), addr, (void *)dup)); goto failure; } } /* set the node @addr string */ ddi_set_name_addr(child, addr); /* call HBA's target init entry point if it exists */ if (tran->tran_tgt_init != NULL) { SCSI_HBA_LOG((_LOG(4), NULL, child, "init tran_tgt_init")); sd->sd_tran_tgt_free_done = 0; if ((*tran->tran_tgt_init) (self, child, tran, sd) != DDI_SUCCESS) { scsi_enumeration_failed(child, -1, NULL, "tran_tgt_init"); goto failure; } } SCSI_HBA_LOG((_LOG(3), NULL, child, "init successful")); return (DDI_SUCCESS); failure: if (tran_clone) kmem_free(tran_clone, sizeof (scsi_hba_tran_t)); mutex_destroy(&sd->sd_mutex); kmem_free(sd, sizeof (*sd)); ddi_set_driver_private(child, NULL); ddi_set_name_addr(child, NULL); return (err); /* remove the node */ } static int scsi_busctl_uninitchild(dev_info_t *child) { dev_info_t *self = ddi_get_parent(child); struct scsi_device *sd = ddi_get_driver_private(child); scsi_hba_tran_t *tran; scsi_hba_tran_t *tran_clone; ASSERT(DEVI_BUSY_OWNED(self)); tran = ndi_flavorv_get(self, SCSA_FLAVOR_SCSI_DEVICE); ASSERT(tran && sd); if ((tran == NULL) || (sd == NULL)) return (DDI_FAILURE); /* * We use sd_uninit_prevent to avoid uninitializing barrier/probe * nodes that are still in use. Since barrier/probe nodes are not * attached we can't prevent their state demotion via ndi_hold_devi. */ if (sd->sd_uninit_prevent) { SCSI_HBA_LOG((_LOG(2), NULL, child, "uninit prevented")); return (DDI_FAILURE); } /* * Don't uninitialize a client node if it still has paths. */ if (MDI_CLIENT(child) && mdi_client_get_path_count(child)) { SCSI_HBA_LOG((_LOG(2), NULL, child, "uninit prevented, client has paths")); return (DDI_FAILURE); } SCSI_HBA_LOG((_LOG(3), NULL, child, "uninit begin")); if (tran->tran_hba_flags & SCSI_HBA_TRAN_CLONE) { tran_clone = sd->sd_address.a_hba_tran; /* ... grotty hack, involving sd_tran_safe, continued. */ if (tran_clone != sd->sd_tran_safe) { tran_clone = sd->sd_tran_safe; #ifdef DEBUG /* * Complain so things get fixed and hack can, at * some point in time, be removed. */ SCSI_HBA_LOG((_LOG(WARN), self, NULL, "'%s' is corrupting a_hba_tran", sd->sd_dev ? ddi_driver_name(sd->sd_dev) : "unknown_driver")); #endif /* DEBUG */ } ASSERT(tran_clone->tran_hba_flags & SCSI_HBA_TRAN_CLONE); ASSERT(tran_clone->tran_sd == sd); tran = tran_clone; } else { tran_clone = NULL; ASSERT(tran->tran_sd == NULL); } /* * To simplify host adapter drivers we guarantee that multiple * tran_tgt_init(9E) calls of the same unit address are never * active at the same time. This requires that we always call * tran_tgt_free on probe/barrier nodes directly prior to * uninitchild. * * NOTE: To correctly support SCSI_HBA_TRAN_CLONE, we must use * the (possibly cloned) hba_tran pointer from the scsi_device * instead of hba_tran. */ if (tran->tran_tgt_free) { if (!sd->sd_tran_tgt_free_done) { SCSI_HBA_LOG((_LOG(4), NULL, child, "uninit tran_tgt_free")); (*tran->tran_tgt_free) (self, child, tran, sd); sd->sd_tran_tgt_free_done = 1; } else { SCSI_HBA_LOG((_LOG(4), NULL, child, "uninit tran_tgt_free already done")); } } /* * If a inquiry data is still allocated (by scsi_probe()) we * free the allocation here. This keeps scsi_inq valid for the * same duration as the corresponding inquiry properties. It * also allows a tran_tgt_init() implementation that establishes * sd_inq to deal with deallocation in its tran_tgt_free * (setting sd_inq back to NULL) without upsetting the * framework. Moving the inquiry free here also allows setting * of sd_uninit_prevent to preserve the data for lun0 based * scsi_get_device_type_scsi_options() calls. */ if (sd->sd_inq) { kmem_free(sd->sd_inq, SUN_INQSIZE); sd->sd_inq = (struct scsi_inquiry *)NULL; } mutex_destroy(&sd->sd_mutex); if (tran_clone) kmem_free(tran_clone, sizeof (scsi_hba_tran_t)); kmem_free(sd, sizeof (*sd)); ddi_set_driver_private(child, NULL); SCSI_HBA_LOG((_LOG(3), NULL, child, "uninit complete")); ddi_set_name_addr(child, NULL); return (DDI_SUCCESS); } static int iport_busctl_ua(dev_info_t *child, char *addr, int maxlen) { char *iport_ua; /* limit ndi_devi_findchild_by_callback to expected flavor */ if (ndi_flavor_get(child) != SCSA_FLAVOR_IPORT) return (DDI_FAILURE); if (ddi_prop_lookup_string(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, SCSI_ADDR_PROP_IPORTUA, &iport_ua) != DDI_SUCCESS) { return (DDI_FAILURE); } (void) snprintf(addr, maxlen, "%s", iport_ua); ddi_prop_free(iport_ua); return (DDI_SUCCESS); } static int iport_busctl_reportdev(dev_info_t *child) { dev_info_t *self = ddi_get_parent(child); char *iport_ua; char *initiator_port = NULL; if (ddi_prop_lookup_string(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, SCSI_ADDR_PROP_IPORTUA, &iport_ua) != DDI_SUCCESS) return (DDI_FAILURE); (void) ddi_prop_lookup_string(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, SCSI_ADDR_PROP_INITIATOR_PORT, &initiator_port); if (initiator_port) { SCSI_HBA_LOG((_LOG_NF(CONT), "?%s%d at %s%d: %s %s %s %s", ddi_driver_name(child), ddi_get_instance(child), ddi_driver_name(self), ddi_get_instance(self), SCSI_ADDR_PROP_INITIATOR_PORT, initiator_port, SCSI_ADDR_PROP_IPORTUA, iport_ua)); ddi_prop_free(initiator_port); } else { SCSI_HBA_LOG((_LOG_NF(CONT), "?%s%d at %s%d: %s %s", ddi_driver_name(child), ddi_get_instance(child), ddi_driver_name(self), ddi_get_instance(self), SCSI_ADDR_PROP_IPORTUA, iport_ua)); } ddi_prop_free(iport_ua); return (DDI_SUCCESS); } /* initchild SCSA iport 'child' node */ static int iport_busctl_initchild(dev_info_t *child) { dev_info_t *self = ddi_get_parent(child); dev_info_t *dup = NULL; char addr[SCSI_MAXNAMELEN]; if (iport_busctl_ua(child, addr, sizeof (addr)) != DDI_SUCCESS) return (DDI_NOT_WELL_FORMED); /* Prevent duplicate nodes. */ dup = ndi_devi_findchild_by_callback(self, ddi_node_name(child), addr, iport_busctl_ua); if (dup) { ASSERT(ndi_flavor_get(dup) == SCSA_FLAVOR_IPORT); if (ndi_flavor_get(dup) != SCSA_FLAVOR_IPORT) { SCSI_HBA_LOG((_LOG(1), NULL, child, "init failed: %s@%s: not IPORT flavored", ddi_node_name(child), addr)); return (DDI_FAILURE); } if (dup != child) { SCSI_HBA_LOG((_LOG(4), NULL, child, "init failed: %s@%s: detected duplicate %p", ddi_node_name(child), addr, (void *)dup)); return (DDI_FAILURE); } } /* set the node @addr string */ ddi_set_name_addr(child, addr); return (DDI_SUCCESS); } /* uninitchild SCSA iport 'child' node */ static int iport_busctl_uninitchild(dev_info_t *child) { ddi_set_name_addr(child, NULL); return (DDI_SUCCESS); } /* Uninitialize scsi_device flavor of transport on SCSA iport 'child' node. */ static void iport_postdetach_tran_scsi_device(dev_info_t *child) { scsi_hba_tran_t *tran; tran = ndi_flavorv_get(child, SCSA_FLAVOR_SCSI_DEVICE); if (tran == NULL) return; scsa_tran_teardown(child, tran); scsa_nexus_teardown(child, tran); ndi_flavorv_set(child, SCSA_FLAVOR_SCSI_DEVICE, NULL); scsi_hba_tran_free(tran); } /* Initialize scsi_device flavor of transport on SCSA iport 'child' node. */ static void iport_preattach_tran_scsi_device(dev_info_t *child) { dev_info_t *hba = ddi_get_parent(child); scsi_hba_tran_t *htran; scsi_hba_tran_t *tran; /* parent HBA node scsi_device tran is required */ htran = ndi_flavorv_get(hba, SCSA_FLAVOR_SCSI_DEVICE); ASSERT(htran); /* Allocate iport child's scsi_device transport vector */ tran = scsi_hba_tran_alloc(child, SCSI_HBA_CANSLEEP); ASSERT(tran); /* Structure-copy scsi_device transport of HBA to iport. */ *tran = *htran; /* * Reset scsi_device transport fields not shared with the * parent, and not established below. */ tran->tran_open_flag = 0; tran->tran_hba_private = NULL; /* Establish the devinfo context of this tran structure. */ tran->tran_iport_dip = child; /* Clear SCSI_HBA_SCSA flags (except TA) */ tran->tran_hba_flags &= ~(SCSI_HBA_SCSA_FM | SCSI_HBA_SCSA_PHCI); /* clear parent state */ tran->tran_hba_flags |= SCSI_HBA_SCSA_TA; /* always TA */ tran->tran_hba_flags &= ~SCSI_HBA_HBA; /* never HBA */ /* Establish flavor of transport (and ddi_get_driver_private()) */ ndi_flavorv_set(child, SCSA_FLAVOR_SCSI_DEVICE, tran); /* Setup iport node */ if ((scsa_nexus_setup(child, tran) != DDI_SUCCESS) || (scsa_tran_setup(child, tran) != DDI_SUCCESS)) iport_postdetach_tran_scsi_device(child); } /* Uninitialize smp_device flavor of transport on SCSA iport 'child' node. */ static void iport_postdetach_tran_smp_device(dev_info_t *child) { smp_hba_tran_t *tran; tran = ndi_flavorv_get(child, SCSA_FLAVOR_SMP); if (tran == NULL) return; ndi_flavorv_set(child, SCSA_FLAVOR_SMP, NULL); smp_hba_tran_free(tran); } /* Initialize smp_device flavor of transport on SCSA iport 'child' node. */ static void iport_preattach_tran_smp_device(dev_info_t *child) { dev_info_t *hba = ddi_get_parent(child); smp_hba_tran_t *htran; smp_hba_tran_t *tran; /* parent HBA node smp_device tran is optional */ htran = ndi_flavorv_get(hba, SCSA_FLAVOR_SMP); if (htran == NULL) { ndi_flavorv_set(child, SCSA_FLAVOR_SMP, NULL); return; } /* Allocate iport child's smp_device transport vector */ tran = smp_hba_tran_alloc(child); /* Structure-copy smp_device transport of HBA to iport. */ *tran = *htran; /* Establish flavor of transport */ ndi_flavorv_set(child, SCSA_FLAVOR_SMP, tran); } /* * Generic bus_ctl operations for SCSI HBA's, * hiding the busctl interface from the HBA. */ /*ARGSUSED*/ static int scsi_hba_bus_ctl( dev_info_t *self, dev_info_t *child, ddi_ctl_enum_t op, void *arg, void *result) { int child_flavor = 0; int val; ddi_dma_attr_t *attr; scsi_hba_tran_t *tran; struct attachspec *as; struct detachspec *ds; /* For some ops, child is 'arg'. */ if ((op == DDI_CTLOPS_INITCHILD) || (op == DDI_CTLOPS_UNINITCHILD)) child = (dev_info_t *)arg; /* Determine the flavor of the child: scsi, smp, iport */ child_flavor = ndi_flavor_get(child); switch (op) { case DDI_CTLOPS_INITCHILD: switch (child_flavor) { case SCSA_FLAVOR_SCSI_DEVICE: return (scsi_busctl_initchild(child)); case SCSA_FLAVOR_SMP: return (smp_busctl_initchild(child)); case SCSA_FLAVOR_IPORT: return (iport_busctl_initchild(child)); default: return (DDI_FAILURE); } /* NOTREACHED */ case DDI_CTLOPS_UNINITCHILD: switch (child_flavor) { case SCSA_FLAVOR_SCSI_DEVICE: return (scsi_busctl_uninitchild(child)); case SCSA_FLAVOR_SMP: return (smp_busctl_uninitchild(child)); case SCSA_FLAVOR_IPORT: return (iport_busctl_uninitchild(child)); default: return (DDI_FAILURE); } /* NOTREACHED */ case DDI_CTLOPS_REPORTDEV: switch (child_flavor) { case SCSA_FLAVOR_SCSI_DEVICE: return (scsi_busctl_reportdev(child)); case SCSA_FLAVOR_SMP: return (smp_busctl_reportdev(child)); case SCSA_FLAVOR_IPORT: return (iport_busctl_reportdev(child)); default: return (DDI_FAILURE); } /* NOTREACHED */ case DDI_CTLOPS_ATTACH: as = (struct attachspec *)arg; if (child_flavor != SCSA_FLAVOR_IPORT) return (DDI_SUCCESS); /* iport processing */ if (as->when == DDI_PRE) { /* setup pre attach(9E) */ iport_preattach_tran_scsi_device(child); iport_preattach_tran_smp_device(child); } else if ((as->when == DDI_POST) && (as->result != DDI_SUCCESS)) { /* cleanup if attach(9E) failed */ iport_postdetach_tran_scsi_device(child); iport_postdetach_tran_smp_device(child); } return (DDI_SUCCESS); case DDI_CTLOPS_DETACH: ds = (struct detachspec *)arg; if (child_flavor != SCSA_FLAVOR_IPORT) return (DDI_SUCCESS); /* iport processing */ if ((ds->when == DDI_POST) && (ds->result == DDI_SUCCESS)) { /* cleanup if detach(9E) was successful */ iport_postdetach_tran_scsi_device(child); iport_postdetach_tran_smp_device(child); } return (DDI_SUCCESS); case DDI_CTLOPS_IOMIN: tran = ddi_get_driver_private(self); ASSERT(tran); if (tran == NULL) return (DDI_FAILURE); /* * The 'arg' value of nonzero indicates 'streaming' * mode. If in streaming mode, pick the largest * of our burstsizes available and say that that * is our minimum value (modulo what minxfer is). */ attr = &tran->tran_dma_attr; val = *((int *)result); val = maxbit(val, attr->dma_attr_minxfer); *((int *)result) = maxbit(val, ((intptr_t)arg ? (1<dma_attr_burstsizes)-1) : (1<<(ddi_fls(attr->dma_attr_burstsizes)-1)))); return (ddi_ctlops(self, child, op, arg, result)); case DDI_CTLOPS_SIDDEV: return (ndi_dev_is_persistent_node(child) ? DDI_SUCCESS : DDI_FAILURE); case DDI_CTLOPS_POWER: return (DDI_SUCCESS); /* * These ops correspond to functions that "shouldn't" be called * by a SCSI target driver. So we whine when we're called. */ case DDI_CTLOPS_DMAPMAPC: case DDI_CTLOPS_REPORTINT: case DDI_CTLOPS_REGSIZE: case DDI_CTLOPS_NREGS: case DDI_CTLOPS_SLAVEONLY: case DDI_CTLOPS_AFFINITY: case DDI_CTLOPS_POKE: case DDI_CTLOPS_PEEK: SCSI_HBA_LOG((_LOG(WARN), self, NULL, "invalid op (%d)", op)); return (DDI_FAILURE); /* Everything else we pass up */ case DDI_CTLOPS_PTOB: case DDI_CTLOPS_BTOP: case DDI_CTLOPS_BTOPR: case DDI_CTLOPS_DVMAPAGESIZE: default: return (ddi_ctlops(self, child, op, arg, result)); } /* NOTREACHED */ } /* * Private wrapper for scsi_pkt's allocated via scsi_hba_pkt_alloc() */ struct scsi_pkt_wrapper { struct scsi_pkt scsi_pkt; int pkt_wrapper_magic; int pkt_wrapper_len; }; #if !defined(lint) _NOTE(SCHEME_PROTECTS_DATA("unique per thread", scsi_pkt_wrapper)) _NOTE(SCHEME_PROTECTS_DATA("Unshared Data", dev_ops)) #endif /* * Called by an HBA to allocate a scsi_pkt */ /*ARGSUSED*/ struct scsi_pkt * scsi_hba_pkt_alloc( dev_info_t *self, struct scsi_address *ap, int cmdlen, int statuslen, int tgtlen, int hbalen, int (*callback)(caddr_t arg), caddr_t arg) { struct scsi_pkt *pkt; struct scsi_pkt_wrapper *hba_pkt; caddr_t p; int acmdlen, astatuslen, atgtlen, ahbalen; int pktlen; /* Sanity check */ if (callback != SLEEP_FUNC && callback != NULL_FUNC) SCSI_HBA_LOG((_LOG(WARN), self, NULL, "callback must be SLEEP_FUNC or NULL_FUNC")); /* * Round up so everything gets allocated on long-word boundaries */ acmdlen = ROUNDUP(cmdlen); astatuslen = ROUNDUP(statuslen); atgtlen = ROUNDUP(tgtlen); ahbalen = ROUNDUP(hbalen); pktlen = sizeof (struct scsi_pkt_wrapper) + acmdlen + astatuslen + atgtlen + ahbalen; hba_pkt = kmem_zalloc(pktlen, (callback == SLEEP_FUNC) ? KM_SLEEP : KM_NOSLEEP); if (hba_pkt == NULL) { ASSERT(callback == NULL_FUNC); return (NULL); } /* * Set up our private info on this pkt */ hba_pkt->pkt_wrapper_len = pktlen; hba_pkt->pkt_wrapper_magic = PKT_WRAPPER_MAGIC; /* alloced correctly */ pkt = &hba_pkt->scsi_pkt; /* * Set up pointers to private data areas, cdb, and status. */ p = (caddr_t)(hba_pkt + 1); if (hbalen > 0) { pkt->pkt_ha_private = (opaque_t)p; p += ahbalen; } if (tgtlen > 0) { pkt->pkt_private = (opaque_t)p; p += atgtlen; } if (statuslen > 0) { pkt->pkt_scbp = (uchar_t *)p; p += astatuslen; } if (cmdlen > 0) { pkt->pkt_cdbp = (uchar_t *)p; } /* * Initialize the pkt's scsi_address */ pkt->pkt_address = *ap; /* * NB: It may not be safe for drivers, esp target drivers, to depend * on the following fields being set until all the scsi_pkt * allocation violations discussed in scsi_pkt.h are all resolved. */ pkt->pkt_cdblen = cmdlen; pkt->pkt_tgtlen = tgtlen; pkt->pkt_scblen = statuslen; return (pkt); } /* * Called by an HBA to free a scsi_pkt */ /*ARGSUSED*/ void scsi_hba_pkt_free( struct scsi_address *ap, struct scsi_pkt *pkt) { kmem_free(pkt, ((struct scsi_pkt_wrapper *)pkt)->pkt_wrapper_len); } /* * Return 1 if the scsi_pkt used a proper allocator. * * The DDI does not allow a driver to allocate it's own scsi_pkt(9S), a * driver should not have *any* compiled in dependencies on "sizeof (struct * scsi_pkt)". While this has been the case for many years, a number of * drivers have still not been fixed. This function can be used to detect * improperly allocated scsi_pkt structures, and produce messages identifying * drivers that need to be fixed. * * While drivers in violation are being fixed, this function can also * be used by the framework to detect packets that violated allocation * rules. * * NB: It is possible, but very unlikely, for this code to return a false * positive (finding correct magic, but for wrong reasons). Careful * consideration is needed for callers using this interface to condition * access to newer scsi_pkt fields (those after pkt_reason). * * NB: As an aid to minimizing the amount of work involved in 'fixing' legacy * drivers that violate scsi_*(9S) allocation rules, private * scsi_pkt_size()/scsi_size_clean() functions are available (see their * implementation for details). * * *** Non-legacy use of scsi_pkt_size() is discouraged. *** * * NB: When supporting broken HBA drivers is not longer a concern, this * code should be removed. */ int scsi_pkt_allocated_correctly(struct scsi_pkt *pkt) { struct scsi_pkt_wrapper *hba_pkt = (struct scsi_pkt_wrapper *)pkt; int magic; major_t major; #ifdef DEBUG int *pspwm, *pspcwm; /* * We are getting scsi packets from two 'correct' wrapper schemes, * make sure we are looking at the same place in both to detect * proper allocation. */ pspwm = &((struct scsi_pkt_wrapper *)0)->pkt_wrapper_magic; pspcwm = &((struct scsi_pkt_cache_wrapper *)0)->pcw_magic; ASSERT(pspwm == pspcwm); #endif /* DEBUG */ /* * Check to see if driver is scsi_size_clean(), assume it * is using the scsi_pkt_size() interface everywhere it needs to * if the driver indicates it is scsi_size_clean(). */ major = ddi_driver_major(P_TO_TRAN(pkt)->tran_hba_dip); if (devnamesp[major].dn_flags & DN_SCSI_SIZE_CLEAN) return (1); /* ok */ /* * Special case crossing a page boundary. If the scsi_pkt was not * allocated correctly, then across a page boundary we have a * fault hazard. */ if ((((uintptr_t)(&hba_pkt->scsi_pkt)) & MMU_PAGEMASK) == (((uintptr_t)(&hba_pkt->pkt_wrapper_magic)) & MMU_PAGEMASK)) { /* fastpath, no cross-page hazard */ magic = hba_pkt->pkt_wrapper_magic; } else { /* add protection for cross-page hazard */ if (ddi_peek32((dev_info_t *)NULL, &hba_pkt->pkt_wrapper_magic, &magic) == DDI_FAILURE) { return (0); /* violation */ } } /* properly allocated packet always has correct magic */ return ((magic == PKT_WRAPPER_MAGIC) ? 1 : 0); } /* * Private interfaces to simplify conversion of legacy drivers so they don't * depend on scsi_*(9S) size. Instead of using these private interface, HBA * drivers should use DDI sanctioned allocation methods: * * scsi_pkt Use scsi_hba_pkt_alloc(9F), or implement * tran_setup_pkt(9E). * * scsi_device You are doing something strange/special, a scsi_device * structure should only be allocated by scsi_hba.c * initchild code or scsi_vhci.c code. * * scsi_hba_tran Use scsi_hba_tran_alloc(9F). */ size_t scsi_pkt_size() { return (sizeof (struct scsi_pkt)); } size_t scsi_hba_tran_size() { return (sizeof (scsi_hba_tran_t)); } size_t scsi_device_size() { return (sizeof (struct scsi_device)); } /* * Legacy compliance to scsi_pkt(9S) allocation rules through use of * scsi_pkt_size() is detected by the 'scsi-size-clean' driver.conf property * or an HBA driver calling to scsi_size_clean() from attach(9E). A driver * developer should only indicate that a legacy driver is clean after using * SCSI_SIZE_CLEAN_VERIFY to ensure compliance (see scsi_pkt.h). */ void scsi_size_clean(dev_info_t *self) { major_t major; struct devnames *dnp; ASSERT(self); major = ddi_driver_major(self); ASSERT(major < devcnt); if (major >= devcnt) { SCSI_HBA_LOG((_LOG(WARN), self, NULL, "scsi_pkt_size: bogus major: %d", major)); return; } /* Set DN_SCSI_SIZE_CLEAN flag in dn_flags. */ dnp = &devnamesp[major]; if ((dnp->dn_flags & DN_SCSI_SIZE_CLEAN) == 0) { LOCK_DEV_OPS(&dnp->dn_lock); dnp->dn_flags |= DN_SCSI_SIZE_CLEAN; UNLOCK_DEV_OPS(&dnp->dn_lock); } } /* * Called by an HBA to map strings to capability indices */ int scsi_hba_lookup_capstr( char *capstr) { /* * Capability strings: only add entries to mask the legacy * '_' vs. '-' misery. All new capabilities should use '-', * and be captured be added to SCSI_CAP_ASCII. */ static struct cap_strings { char *cap_string; int cap_index; } cap_strings[] = { { "dma_max", SCSI_CAP_DMA_MAX }, { "msg_out", SCSI_CAP_MSG_OUT }, { "wide_xfer", SCSI_CAP_WIDE_XFER }, { NULL, 0 } }; static char *cap_ascii[] = SCSI_CAP_ASCII; char **cap; int i; struct cap_strings *cp; for (cap = cap_ascii, i = 0; *cap != NULL; cap++, i++) if (strcmp(*cap, capstr) == 0) return (i); for (cp = cap_strings; cp->cap_string != NULL; cp++) if (strcmp(cp->cap_string, capstr) == 0) return (cp->cap_index); return (-1); } /* * Called by an HBA to determine if the system is in 'panic' state. */ int scsi_hba_in_panic() { return (panicstr != NULL); } /* * If a SCSI target driver attempts to mmap memory, * the buck stops here. */ /*ARGSUSED*/ static int scsi_hba_map_fault( dev_info_t *self, dev_info_t *child, struct hat *hat, struct seg *seg, caddr_t addr, struct devpage *dp, pfn_t pfn, uint_t prot, uint_t lock) { return (DDI_FAILURE); } static int scsi_hba_get_eventcookie( dev_info_t *self, dev_info_t *child, char *name, ddi_eventcookie_t *eventp) { scsi_hba_tran_t *tran; tran = ddi_get_driver_private(self); if (tran->tran_get_eventcookie && ((*tran->tran_get_eventcookie)(self, child, name, eventp) == DDI_SUCCESS)) { return (DDI_SUCCESS); } return (ndi_busop_get_eventcookie(self, child, name, eventp)); } static int scsi_hba_add_eventcall( dev_info_t *self, dev_info_t *child, ddi_eventcookie_t event, void (*callback)( dev_info_t *self, ddi_eventcookie_t event, void *arg, void *bus_impldata), void *arg, ddi_callback_id_t *cb_id) { scsi_hba_tran_t *tran; tran = ddi_get_driver_private(self); if (tran->tran_add_eventcall && ((*tran->tran_add_eventcall)(self, child, event, callback, arg, cb_id) == DDI_SUCCESS)) { return (DDI_SUCCESS); } return (DDI_FAILURE); } static int scsi_hba_remove_eventcall(dev_info_t *self, ddi_callback_id_t cb_id) { scsi_hba_tran_t *tran; ASSERT(cb_id); tran = ddi_get_driver_private(self); if (tran->tran_remove_eventcall && ((*tran->tran_remove_eventcall)( self, cb_id) == DDI_SUCCESS)) { return (DDI_SUCCESS); } return (DDI_FAILURE); } static int scsi_hba_post_event( dev_info_t *self, dev_info_t *child, ddi_eventcookie_t event, void *bus_impldata) { scsi_hba_tran_t *tran; tran = ddi_get_driver_private(self); if (tran->tran_post_event && ((*tran->tran_post_event)(self, child, event, bus_impldata) == DDI_SUCCESS)) { return (DDI_SUCCESS); } return (DDI_FAILURE); } /* * Default getinfo(9e) for scsi_hba */ /* ARGSUSED */ static int scsi_hba_info(dev_info_t *self, ddi_info_cmd_t infocmd, void *arg, void **result) { int error = DDI_SUCCESS; switch (infocmd) { case DDI_INFO_DEVT2INSTANCE: *result = (void *)(intptr_t)(MINOR2INST(getminor((dev_t)arg))); break; default: error = DDI_FAILURE; } return (error); } /* * Default open and close routine for scsi_hba */ /* ARGSUSED */ int scsi_hba_open(dev_t *devp, int flags, int otyp, cred_t *credp) { dev_info_t *self; scsi_hba_tran_t *tran; int rv = 0; if (otyp != OTYP_CHR) return (EINVAL); if ((self = e_ddi_hold_devi_by_dev(*devp, 0)) == NULL) return (ENXIO); tran = ddi_get_driver_private(self); if (tran == NULL) { ddi_release_devi(self); return (ENXIO); } /* * tran_open_flag bit field: * 0: closed * 1: shared open by minor at bit position * 1 at 31st bit: exclusive open */ mutex_enter(&(tran->tran_open_lock)); if (flags & FEXCL) { if (tran->tran_open_flag != 0) { rv = EBUSY; /* already open */ } else { tran->tran_open_flag = TRAN_OPEN_EXCL; } } else { if (tran->tran_open_flag == TRAN_OPEN_EXCL) { rv = EBUSY; /* already excl. open */ } else { int minor = getminor(*devp) & TRAN_MINOR_MASK; tran->tran_open_flag |= (1 << minor); /* * Ensure that the last framework reserved minor * is unused. Otherwise, the exclusive open * mechanism may break. */ ASSERT(minor != 31); } } mutex_exit(&(tran->tran_open_lock)); ddi_release_devi(self); return (rv); } /* ARGSUSED */ int scsi_hba_close(dev_t dev, int flag, int otyp, cred_t *credp) { dev_info_t *self; scsi_hba_tran_t *tran; if (otyp != OTYP_CHR) return (EINVAL); if ((self = e_ddi_hold_devi_by_dev(dev, 0)) == NULL) return (ENXIO); tran = ddi_get_driver_private(self); if (tran == NULL) { ddi_release_devi(self); return (ENXIO); } mutex_enter(&(tran->tran_open_lock)); if (tran->tran_open_flag == TRAN_OPEN_EXCL) { tran->tran_open_flag = 0; } else { int minor = getminor(dev) & TRAN_MINOR_MASK; tran->tran_open_flag &= ~(1 << minor); } mutex_exit(&(tran->tran_open_lock)); ddi_release_devi(self); return (0); } /* * standard ioctl commands for SCSI hotplugging */ /* ARGSUSED */ int scsi_hba_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, cred_t *credp, int *rvalp) { dev_info_t *self; struct devctl_iocdata *dcp = NULL; dev_info_t *child = NULL; mdi_pathinfo_t *path = NULL; struct scsi_device *sd; scsi_hba_tran_t *tran; uint_t bus_state; int rv = 0; int circ; char *name; char *addr; self = e_ddi_hold_devi_by_dev(dev, 0); if (self == NULL) { rv = ENXIO; goto out; } tran = ddi_get_driver_private(self); if (tran == NULL) { rv = ENXIO; goto out; } /* Ioctls for which the generic implementation suffices. */ switch (cmd) { case DEVCTL_BUS_GETSTATE: rv = ndi_devctl_ioctl(self, cmd, arg, mode, 0); goto out; } /* read devctl ioctl data */ if (ndi_dc_allochdl((void *)arg, &dcp) != NDI_SUCCESS) { rv = EFAULT; goto out; } /* Ioctls that require child identification */ switch (cmd) { case DEVCTL_DEVICE_GETSTATE: case DEVCTL_DEVICE_ONLINE: case DEVCTL_DEVICE_OFFLINE: case DEVCTL_DEVICE_REMOVE: case DEVCTL_DEVICE_RESET: name = ndi_dc_getname(dcp); addr = ndi_dc_getaddr(dcp); if ((name == NULL) || (addr == NULL)) { rv = EINVAL; goto out; } /* * Find child with name@addr - might find a devinfo * child (child), a pathinfo child (path), or nothing. */ scsi_hba_devi_enter(self, &circ); (void) scsi_findchild(self, name, addr, 1, &child, &path, NULL); if (path) { /* Found a pathinfo */ ASSERT(path && (child == NULL)); mdi_hold_path(path); scsi_hba_devi_exit_phci(self, circ); sd = NULL; } else if (child) { /* Found a devinfo */ ASSERT(child && (path == NULL)); /* verify scsi_device of child */ if (ndi_flavor_get(child) == SCSA_FLAVOR_SCSI_DEVICE) sd = ddi_get_driver_private(child); else sd = NULL; } else { ASSERT((path == NULL) && (child == NULL)); scsi_hba_devi_exit(self, circ); rv = ENXIO; /* found nothing */ goto out; } break; case DEVCTL_BUS_RESETALL: /* ioctl that operate on any child */ /* * Find a child's scsi_address so we can invoke tran_reset. * * Future: If no child exists, we could fake a child. This will * be a enhancement for the future - for now, we fall back to * BUS_RESET. */ scsi_hba_devi_enter(self, &circ); child = ddi_get_child(self); sd = NULL; while (child) { /* verify scsi_device of child */ if (ndi_flavor_get(child) == SCSA_FLAVOR_SCSI_DEVICE) sd = ddi_get_driver_private(child); if (sd != NULL) { /* * NOTE: node has a scsi_device structure, so * it must be initialized. */ ndi_hold_devi(child); break; } child = ddi_get_next_sibling(child); } scsi_hba_devi_exit(self, circ); break; } switch (cmd) { case DEVCTL_DEVICE_GETSTATE: if (path) { if (mdi_dc_return_dev_state(path, dcp) != MDI_SUCCESS) rv = EFAULT; } else if (child) { if (ndi_dc_return_dev_state(child, dcp) != NDI_SUCCESS) rv = EFAULT; } else { rv = ENXIO; } break; case DEVCTL_DEVICE_RESET: if (sd == NULL) { rv = ENOTTY; break; } if (tran->tran_reset == NULL) { rv = ENOTSUP; break; } /* Start with the small stick */ if (scsi_reset(&sd->sd_address, RESET_LUN) == 1) break; /* LUN reset worked */ if (scsi_reset(&sd->sd_address, RESET_TARGET) != 1) rv = EIO; /* Target reset failed */ break; case DEVCTL_BUS_QUIESCE: if ((ndi_get_bus_state(self, &bus_state) == NDI_SUCCESS) && (bus_state == BUS_QUIESCED)) rv = EALREADY; else if (tran->tran_quiesce == NULL) rv = ENOTSUP; /* man ioctl(7I) says ENOTTY */ else if (tran->tran_quiesce(self) != 0) rv = EIO; else if (ndi_set_bus_state(self, BUS_QUIESCED) != NDI_SUCCESS) rv = EIO; break; case DEVCTL_BUS_UNQUIESCE: if ((ndi_get_bus_state(self, &bus_state) == NDI_SUCCESS) && (bus_state == BUS_ACTIVE)) rv = EALREADY; else if (tran->tran_unquiesce == NULL) rv = ENOTSUP; /* man ioctl(7I) says ENOTTY */ else if (tran->tran_unquiesce(self) != 0) rv = EIO; else if (ndi_set_bus_state(self, BUS_ACTIVE) != NDI_SUCCESS) rv = EIO; break; case DEVCTL_BUS_RESET: if (tran->tran_bus_reset == NULL) rv = ENOTSUP; /* man ioctl(7I) says ENOTTY */ else if (tran->tran_bus_reset(self, RESET_BUS) != 1) rv = EIO; break; case DEVCTL_BUS_RESETALL: if ((sd != NULL) && (scsi_reset(&sd->sd_address, RESET_ALL) == 1)) { break; /* reset all worked */ } if (tran->tran_bus_reset == NULL) { rv = ENOTSUP; /* man ioctl(7I) says ENOTTY */ break; } if (tran->tran_bus_reset(self, RESET_BUS) != 1) rv = EIO; /* bus reset failed */ break; case DEVCTL_BUS_CONFIGURE: if (ndi_devi_config(self, NDI_DEVFS_CLEAN | NDI_DEVI_PERSIST | NDI_CONFIG_REPROBE) != NDI_SUCCESS) { rv = EIO; } break; case DEVCTL_BUS_UNCONFIGURE: if (ndi_devi_unconfig(self, NDI_DEVFS_CLEAN | NDI_DEVI_REMOVE) != NDI_SUCCESS) { rv = EBUSY; } break; case DEVCTL_DEVICE_ONLINE: ASSERT(child || path); if (path) { if (mdi_pi_online(path, NDI_USER_REQ) != MDI_SUCCESS) rv = EIO; } else { if (ndi_devi_online(child, 0) != NDI_SUCCESS) rv = EIO; } break; case DEVCTL_DEVICE_OFFLINE: ASSERT(child || path); if (sd != NULL) (void) scsi_clear_task_set(&sd->sd_address); if (path) { if (mdi_pi_offline(path, NDI_USER_REQ) != MDI_SUCCESS) rv = EIO; } else { if (ndi_devi_offline(child, NDI_DEVFS_CLEAN) != NDI_SUCCESS) rv = EIO; } break; case DEVCTL_DEVICE_REMOVE: ASSERT(child || path); if (sd != NULL) (void) scsi_clear_task_set(&sd->sd_address); if (path) { /* NOTE: don't pass NDI_DEVI_REMOVE to mdi_pi_offline */ if (mdi_pi_offline(path, NDI_USER_REQ) == MDI_SUCCESS) { scsi_hba_devi_enter_phci(self, &circ); mdi_rele_path(path); /* ... here is the DEVICE_REMOVE part. */ (void) mdi_pi_free(path, 0); path = NULL; } else { rv = EIO; } } else { if (ndi_devi_offline(child, NDI_DEVFS_CLEAN | NDI_DEVI_REMOVE) != NDI_SUCCESS) rv = EIO; } break; default: ASSERT(dcp != NULL); rv = ENOTTY; break; } /* all done -- clean up and return */ out: /* release hold on what we found */ if (path) { scsi_hba_devi_enter_phci(self, &circ); mdi_rele_path(path); } if (path || child) scsi_hba_devi_exit(self, circ); if (dcp) ndi_dc_freehdl(dcp); if (self) ddi_release_devi(self); *rvalp = rv; return (rv); } /*ARGSUSED*/ static int scsi_hba_fm_init_child(dev_info_t *self, dev_info_t *child, int cap, ddi_iblock_cookie_t *ibc) { scsi_hba_tran_t *tran = ddi_get_driver_private(self); return (tran ? tran->tran_fm_capable : scsi_fm_capable); } static int scsi_hba_bus_power(dev_info_t *self, void *impl_arg, pm_bus_power_op_t op, void *arg, void *result) { scsi_hba_tran_t *tran; tran = ddi_get_driver_private(self); if (tran && tran->tran_bus_power) { return (tran->tran_bus_power(self, impl_arg, op, arg, result)); } return (pm_busop_bus_power(self, impl_arg, op, arg, result)); } /* * Return the lun64 value from a address string: "addr,lun[,sfunc]". Either * the lun is after the first ',' or the entire address string is the lun. * Return SCSI_LUN64_ILLEGAL if the format is incorrect. A lun64 is at most * 16 hex digits long. * * If the address string specified has incorrect syntax (busconfig one of * bogus /devices path) then scsi_addr_to_lun64 can return SCSI_LUN64_ILLEGAL. */ static scsi_lun64_t scsi_addr_to_lun64(char *addr) { scsi_lun64_t lun64; char *s; int i; if (addr) { s = strchr(addr, ','); /* "addr,lun" */ if (s) s++; /* skip ',', at lun */ else s = addr; /* "lun" */ for (lun64 = 0, i = 0; *s && (i < 16); s++, i++) { if (*s >= '0' && *s <= '9') lun64 = (lun64 << 4) + (*s - '0'); else if (*s >= 'A' && *s <= 'F') lun64 = (lun64 << 4) + 10 + (*s - 'A'); else if (*s >= 'a' && *s <= 'f') lun64 = (lun64 << 4) + 10 + (*s - 'a'); else break; } if (*s && (*s != ',')) /* [,sfunc] is OK */ lun64 = SCSI_LUN64_ILLEGAL; } else lun64 = SCSI_LUN64_ILLEGAL; if (lun64 == SCSI_LUN64_ILLEGAL) SCSI_HBA_LOG((_LOG(2), NULL, NULL, "addr_to_lun64 %s lun %" PRIlun64, addr ? addr : "NULL", lun64)); return (lun64); } /* * Return the sfunc value from a address string: "addr,lun[,sfunc]". Either the * sfunc is after the second ',' or the entire address string is the sfunc. * Return -1 if there is only one ',' in the address string or the string is * invalid. An sfunc is at most two hex digits long. */ static int scsi_addr_to_sfunc(char *addr) { int sfunc; char *s; int i; if (addr) { s = strchr(addr, ','); /* "addr,lun" */ if (s) { s++; /* skip ',', at lun */ s = strchr(s, ','); /* "lun,sfunc" */ if (s == NULL) return (-1); /* no ",sfunc" */ s++; /* skip ',', at sfunc */ } else s = addr; /* "sfunc" */ for (sfunc = 0, i = 0; *s && (i < 2); s++, i++) { if (*s >= '0' && *s <= '9') sfunc = (sfunc << 4) + (*s - '0'); else if (*s >= 'A' && *s <= 'F') sfunc = (sfunc << 4) + 10 + (*s - 'A'); else if (*s >= 'a' && *s <= 'f') sfunc = (sfunc << 4) + 10 + (*s - 'a'); else break; } if (*s) sfunc = -1; /* illegal */ } else sfunc = -1; return (sfunc); } /* * Convert scsi ascii string data to NULL terminated (semi) legal IEEE 1275 * "compatible" (name) property form. * * For ASCII INQUIRY data, a one-way conversion algorithm is needed to take * SCSI_ASCII (20h - 7Eh) to a 1275-like compatible form. The 1275 spec allows * letters, digits, one ",", and ". _ + -", all limited by a maximum 31 * character length. Since ", ." are used as separators in the compatible * string itself, they are converted to "_". All SCSI_ASCII characters that * are illegal in 1275, as well as any illegal SCSI_ASCII characters * encountered, are converted to "_". To reduce length, trailing blanks are * trimmed from SCSI_ASCII fields prior to conversion. * * Example: SCSI_ASCII "ST32550W SUN2.1G" -> "ST32550W_SUN2_1G" * * NOTE: the 1275 string form is always less than or equal to the scsi form. */ static char * string_scsi_to_1275(char *s_1275, char *s_scsi, int len) { (void) strncpy(s_1275, s_scsi, len); s_1275[len--] = '\0'; while (len >= 0) { if (s_1275[len] == ' ') s_1275[len--] = '\0'; /* trim trailing " " */ else break; } while (len >= 0) { if (((s_1275[len] >= 'a') && (s_1275[len] <= 'z')) || ((s_1275[len] >= 'A') && (s_1275[len] <= 'Z')) || ((s_1275[len] >= '0') && (s_1275[len] <= '9')) || (s_1275[len] == '_') || (s_1275[len] == '+') || (s_1275[len] == '-')) len--; /* legal 1275 */ else s_1275[len--] = '_'; /* illegal SCSI_ASCII | 1275 */ } return (s_1275); } /* * Given the inquiry data, binding_set, and dtype_node for a scsi device, * return the nodename and compatible property for the device. The "compatible" * concept comes from IEEE-1275. The compatible information is returned is in * the correct form for direct use defining the "compatible" string array * property. Internally, "compatible" is also used to determine the nodename * to return. * * This function is provided as a separate entry point for use by drivers that * currently issue their own non-SCSA inquiry command and perform their own * node creation based their own private compiled in tables. Converting these * drivers to use this interface provides a quick easy way of obtaining * consistency as well as the flexibility associated with the 1275 techniques. * * The dtype_node is passed as a separate argument (instead of having the * implementation use inq_dtype). It indicates that information about * a secondary function embedded service should be produced. * * Callers must always use scsi_hba_nodename_compatible_free, even if * *nodenamep is null, to free the nodename and compatible information * when done. * * If a nodename can't be determined then **compatiblep will point to a * diagnostic string containing all the compatible forms. * * NOTE: some compatible strings may violate the 31 character restriction * imposed by IEEE-1275. This is not a problem because Solaris does not care * about this 31 character limit. * * Each compatible form belongs to a form-group. The form-groups currently * defined are generic ("scsiclass"), binding-set ("scsa.b"), and failover * ("scsa.f"). * * The following compatible forms, in high to low precedence * order, are defined for SCSI target device nodes. * * scsiclass,DDEEFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (1 *1&2) * scsiclass,DDEE.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (2 *1) * scsiclass,DDFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (3 *2) * scsiclass,DD.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (4) * scsiclass,DDEEFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP (5 *1&2) * scsiclass,DDEE.vVVVVVVVV.pPPPPPPPPPPPPPPPP (6 *1) * scsiclass,DDFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP (7 *2) * scsiclass,DD.vVVVVVVVV.pPPPPPPPPPPPPPPPP (8) * scsa,DD.bBBBBBBBB (8.5 *3) * scsiclass,DDEEFFF (9 *1&2) * scsiclass,DDEE (10 *1) * scsiclass,DDFFF (11 *2) * scsiclass,DD (12) * scsa.fFFF (12.5 *4) * scsiclass (13) * * *1 only produced on a secondary function node * *2 only produced when generic form-group flags exist. * *3 only produced when binding-set form-group legacy support is needed * *4 only produced when failover form-group flags exist. * * where: * * v is the letter 'v'. Denotest the * beginning of VVVVVVVV. * * VVVVVVVV Translated scsi_vendor. * * p is the letter 'p'. Denotes the * beginning of PPPPPPPPPPPPPPPP. * * PPPPPPPPPPPPPPPP Translated scsi_product. * * r is the letter 'r'. Denotes the * beginning of RRRR. * * RRRR Translated scsi_revision. * * DD is a two digit ASCII hexadecimal * number. The value of the two digits is * based one the SCSI "Peripheral device * type" command set associated with the * node. On a primary node this is the * scsi_dtype of the primary command set, * on a secondary node this is the * scsi_dtype associated with the secondary * function embedded command set. * * EE Same encoding used for DD. This form is * only generated on secondary function * nodes. The DD secondary function is embedded * in an EE device. * * FFF Concatenation, in alphabetical order, * of the flag characters within a form-group. * For a given form-group, the following * flags are defined. * * scsiclass: (generic form-group): * R Removable_Media: Used when * inq_rmb is set. * S SAF-TE device: Used when * inquiry information indicates * SAF-TE devices. * * scsa.f: (failover form-group): * E Explicit Target_Port_Group: Used * when inq_tpgse is set and 'G' is * alse present. * G GUID: Used when a GUID can be * generated for the device. * I Implicit Target_Port_Group: Used * when inq_tpgs is set and 'G' is * also present. * * Forms using FFF are only be generated * if there are applicable flag * characters. * * b is the letter 'b'. Denotes the * beginning of BBBBBBBB. * * BBBBBBBB Binding-set. Operating System Specific: * scsi-binding-set property of HBA. */ #define NCOMPAT (1 + (13 + 2) + 1) #define COMPAT_LONGEST (strlen( \ "scsiclass,DDEEFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR" + 1)) /* * Private version with extra device 'identity' arguments to allow code * to determine GUID FFF support. */ static void scsi_hba_ident_nodename_compatible_get(struct scsi_inquiry *inq, uchar_t *inq80, size_t inq80len, uchar_t *inq83, size_t inq83len, char *binding_set, int dtype_node, char *compat0, char **nodenamep, char **drivernamep, char ***compatiblep, int *ncompatiblep) { char vid[sizeof (inq->inq_vid) + 1 ]; char pid[sizeof (inq->inq_pid) + 1]; char rev[sizeof (inq->inq_revision) + 1]; char gf[sizeof ("RS\0")]; char ff[sizeof ("EGI\0")]; int dtype_device; int ncompat; /* number of compatible */ char **compatp; /* compatible ptrs */ int i; char *nname; /* nodename */ char *dname; /* driver name */ char **csp; char *p; int tlen; int len; major_t major; ddi_devid_t devid; char *guid; uchar_t *iqd = (uchar_t *)inq; /* * Nodename_aliases: This table was originally designed to be * implemented via a new nodename_aliases file - a peer to the * driver_aliases that selects a nodename based on compatible * forms in much the same say driver_aliases is used to select * driver bindings from compatible forms. Each compatible form * is an 'alias'. Until a more general need for a * nodename_aliases file exists, which may never occur, the * scsi mappings are described here via a compiled in table. * * This table contains nodename mappings for self-identifying * scsi devices enumerated by the Solaris kernel. For a given * device, the highest precedence "compatible" form with a * mapping is used to select the nodename for the device. This * will typically be a generic nodename, however in some legacy * compatibility cases a driver nodename mapping may be selected. * * Because of possible breakage associated with switching SCSI * target devices from driver nodenames to generic nodenames, * we are currently unable to support generic nodenames for all * SCSI devices (binding-sets). Although /devices paths are * defined as unstable, avoiding possible breakage is * important. Some of the newer SCSI transports (USB) already * use generic nodenames. All new SCSI transports and target * devices should use generic nodenames. At times this decision * may be architecture dependent (sparc .vs. intel) based on when * a transport was supported on a particular architecture. * * We provide a base set of generic nodename mappings based on * scsiclass dtype and higher-precedence driver nodename * mappings based on scsa "binding-set" to cover legacy * issues. The binding-set is typically associated with * "scsi-binding-set" property value of the HBA. The legacy * mappings are provided independent of whether the driver they * refer to is installed. This allows a correctly named node * be created at discovery time, and binding to occur when/if * an add_drv of the legacy driver occurs. * * We also have mappings for legacy SUN hardware that * misidentifies itself (enclosure services which identify * themselves as processors). All future hardware should use * the correct dtype. * * As SCSI HBAs are modified to use the SCSA interfaces for * self-identifying SCSI target devices (PSARC/2004/116) the * nodename_aliases table (PSARC/2004/420) should be augmented * with legacy mappings in order to maintain compatibility with * existing /devices paths, especially for devices that house * an OS. Failure to do this may cause upgrade problems. * Additions for new target devices or transports should not * add scsa binding-set compatible mappings. */ static struct nodename_aliases { char *na_nodename; /* nodename */ char *na_alias; /* compatible form match */ } na[] = { /* # mapping to generic nodenames based on scsi dtype */ {"disk", "scsiclass,00"}, {"tape", "scsiclass,01"}, {"printer", "scsiclass,02"}, {"processor", "scsiclass,03"}, {"worm", "scsiclass,04"}, {"cdrom", "scsiclass,05"}, {"scanner", "scsiclass,06"}, {"optical-disk", "scsiclass,07"}, {"medium-changer", "scsiclass,08"}, {"obsolete", "scsiclass,09"}, {"prepress-a", "scsiclass,0a"}, {"prepress-b", "scsiclass,0b"}, {"array-controller", "scsiclass,0c"}, {"enclosure", "scsiclass,0d"}, {"disk", "scsiclass,0e"}, {"card-reader", "scsiclass,0f"}, {"bridge", "scsiclass,10"}, {"object-store", "scsiclass,11"}, {"reserved", "scsiclass,12"}, {"reserved", "scsiclass,13"}, {"reserved", "scsiclass,14"}, {"reserved", "scsiclass,15"}, {"reserved", "scsiclass,16"}, {"reserved", "scsiclass,17"}, {"reserved", "scsiclass,18"}, {"reserved", "scsiclass,19"}, {"reserved", "scsiclass,1a"}, {"reserved", "scsiclass,1b"}, {"reserved", "scsiclass,1c"}, {"reserved", "scsiclass,1d"}, {"well-known-lun", "scsiclass,1e"}, {"unknown", "scsiclass,1f"}, #ifdef sparc /* # legacy mapping to driver nodenames for fcp binding-set */ {"ssd", "scsa,00.bfcp"}, {"st", "scsa,01.bfcp"}, {"sgen", "scsa,08.bfcp"}, {"ses", "scsa,0d.bfcp"}, /* # legacy mapping to driver nodenames for vhci binding-set */ {"ssd", "scsa,00.bvhci"}, {"st", "scsa,01.bvhci"}, {"sgen", "scsa,08.bvhci"}, {"ses", "scsa,0d.bvhci"}, #else /* sparc */ /* # for x86 fcp and vhci use generic nodenames */ #endif /* sparc */ /* # legacy mapping to driver nodenames for spi binding-set */ {"sd", "scsa,00.bspi"}, {"sd", "scsa,05.bspi"}, {"sd", "scsa,07.bspi"}, {"st", "scsa,01.bspi"}, {"ses", "scsa,0d.bspi"}, /* # SUN misidentified spi hardware */ {"ses", "scsiclass,03.vSUN.pD2"}, {"ses", "scsiclass,03.vSYMBIOS.pD1000"}, /* # legacy mapping to driver nodenames for atapi binding-set */ {"sd", "scsa,00.batapi"}, {"sd", "scsa,05.batapi"}, {"sd", "scsa,07.batapi"}, {"st", "scsa,01.batapi"}, {"unknown", "scsa,0d.batapi"}, /* # legacy mapping to generic nodenames for usb binding-set */ {"disk", "scsa,05.busb"}, {"disk", "scsa,07.busb"}, {"changer", "scsa,08.busb"}, {"comm", "scsa,09.busb"}, {"array_ctlr", "scsa,0c.busb"}, {"esi", "scsa,0d.busb"}, /* * mapping nodenames for mpt based on scsi dtype * for being compatible with the original node names * under mpt controller */ {"sd", "scsa,00.bmpt"}, {"sd", "scsa,05.bmpt"}, {"sd", "scsa,07.bmpt"}, {"st", "scsa,01.bmpt"}, {"ses", "scsa,0d.bmpt"}, {"sgen", "scsa,08.bmpt"}, {NULL, NULL} }; struct nodename_aliases *nap; /* NOTE: drivernamep can be NULL */ ASSERT(nodenamep && compatiblep && ncompatiblep && (binding_set == NULL || (strlen(binding_set) <= 8))); if ((nodenamep == NULL) || (compatiblep == NULL) || (ncompatiblep == NULL)) return; /* * In order to reduce runtime we allocate one block of memory that * contains both the NULL terminated array of pointers to compatible * forms and the individual compatible strings. This block is * somewhat larger than needed, but is short lived - it only exists * until the caller can transfer the information into the "compatible" * string array property and call scsi_hba_nodename_compatible_free. */ tlen = NCOMPAT * COMPAT_LONGEST; compatp = kmem_alloc((NCOMPAT * sizeof (char *)) + tlen, KM_SLEEP); /* convert inquiry data from SCSI ASCII to 1275 string */ (void) string_scsi_to_1275(vid, inq->inq_vid, sizeof (inq->inq_vid)); (void) string_scsi_to_1275(pid, inq->inq_pid, sizeof (inq->inq_pid)); (void) string_scsi_to_1275(rev, inq->inq_revision, sizeof (inq->inq_revision)); ASSERT((strlen(vid) <= sizeof (inq->inq_vid)) && (strlen(pid) <= sizeof (inq->inq_pid)) && (strlen(rev) <= sizeof (inq->inq_revision))); /* * Form flags in ***ALPHABETICAL*** order within form-group: * * NOTE: When adding a new flag to an existing form-group, careful * consideration must be given to not breaking existing bindings * based on that form-group. */ /* * generic form-group flags * R removable: * Set when inq_rmb is set and for well known scsi dtypes. For a * bus where the entire device is removable (like USB), we expect * the HBA to intercept the inquiry data and set inq_rmb. * Since OBP does not distinguish removable media in its generic * name selection we avoid setting the 'R' flag if the root is not * yet mounted. * S SAF-TE device * Set when the device type is SAT-TE. */ i = 0; dtype_device = inq->inq_dtype & DTYPE_MASK; if (modrootloaded && (inq->inq_rmb || (dtype_device == DTYPE_WORM) || (dtype_device == DTYPE_RODIRECT) || (dtype_device == DTYPE_OPTICAL))) gf[i++] = 'R'; /* removable */ gf[i] = '\0'; if (modrootloaded && (dtype_device == DTYPE_PROCESSOR) && (strncmp((char *)&iqd[44], "SAF-TE", 4) == 0)) gf[i++] = 'S'; gf[i] = '\0'; /* * failover form-group flags * E Explicit Target_Port_Group_Supported: * Set for a device that has a GUID if inq_tpgse also set. * G GUID: * Set when we have identity information, can determine a devid * from the identity information, and can generate a guid from * that devid. * I Implicit Target_Port_Group_Supported: * Set for a device that has a GUID if inq_tpgs also set. */ i = 0; if ((inq80 || inq83) && (ddi_devid_scsi_encode(DEVID_SCSI_ENCODE_VERSION_LATEST, NULL, (uchar_t *)inq, sizeof (*inq), inq80, inq80len, inq83, inq83len, &devid) == DDI_SUCCESS)) { guid = ddi_devid_to_guid(devid); ddi_devid_free(devid); } else guid = NULL; if (guid && (inq->inq_tpgs & TPGS_FAILOVER_EXPLICIT)) ff[i++] = 'E'; /* EXPLICIT TPGS */ if (guid) ff[i++] = 'G'; /* GUID */ if (guid && (inq->inq_tpgs & TPGS_FAILOVER_IMPLICIT)) ff[i++] = 'I'; /* IMPLICIT TPGS */ ff[i] = '\0'; if (guid) ddi_devid_free_guid(guid); /* * Construct all applicable compatible forms. See comment at the * head of the function for a description of the compatible forms. */ csp = compatp; p = (char *)(compatp + NCOMPAT); /* ( 0) driver (optional, not documented in scsi(4)) */ if (compat0) { *csp++ = p; (void) snprintf(p, tlen, "%s", compat0); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 1) scsiclass,DDEEFFF.vV.pP.rR */ if ((dtype_device != dtype_node) && *gf && *vid && *pid && *rev) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%02x%s.v%s.p%s.r%s", dtype_node, dtype_device, gf, vid, pid, rev); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 2) scsiclass,DDEE.vV.pP.rR */ if ((dtype_device != dtype_node) && *vid && *pid && *rev) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%02x.v%s.p%s.r%s", dtype_node, dtype_device, vid, pid, rev); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 3) scsiclass,DDFFF.vV.pP.rR */ if (*gf && *vid && *pid && *rev) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%s.v%s.p%s.r%s", dtype_node, gf, vid, pid, rev); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 4) scsiclass,DD.vV.pP.rR */ if (*vid && *pid && rev) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x.v%s.p%s.r%s", dtype_node, vid, pid, rev); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 5) scsiclass,DDEEFFF.vV.pP */ if ((dtype_device != dtype_node) && *gf && *vid && *pid) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%02x%s.v%s.p%s", dtype_node, dtype_device, gf, vid, pid); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 6) scsiclass,DDEE.vV.pP */ if ((dtype_device != dtype_node) && *vid && *pid) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%02x.v%s.p%s", dtype_node, dtype_device, vid, pid); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 7) scsiclass,DDFFF.vV.pP */ if (*gf && *vid && *pid) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%s.v%s.p%s", dtype_node, gf, vid, pid); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 8) scsiclass,DD.vV.pP */ if (*vid && *pid) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x.v%s.p%s", dtype_node, vid, pid); len = strlen(p) + 1; p += len; tlen -= len; } /* (8.5) scsa,DD.bB (not documented in scsi(4)) */ if (binding_set) { *csp++ = p; (void) snprintf(p, tlen, "scsa,%02x.b%s", dtype_node, binding_set); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 9) scsiclass,DDEEFFF */ if ((dtype_device != dtype_node) && *gf) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%02x%s", dtype_node, dtype_device, gf); len = strlen(p) + 1; p += len; tlen -= len; } /* (10) scsiclass,DDEE */ if (dtype_device != dtype_node) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%02x", dtype_node, dtype_device); len = strlen(p) + 1; p += len; tlen -= len; } /* (11) scsiclass,DDFFF */ if (*gf) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%s", dtype_node, gf); len = strlen(p) + 1; p += len; tlen -= len; } /* (12) scsiclass,DD */ *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x", dtype_node); len = strlen(p) + 1; p += len; tlen -= len; /* (12.5) scsa.fFFF */ if (*ff) { *csp++ = p; (void) snprintf(p, tlen, "scsa.f%s", ff); len = strlen(p) + 1; p += len; tlen -= len; } /* (13) scsiclass */ *csp++ = p; (void) snprintf(p, tlen, "scsiclass"); len = strlen(p) + 1; p += len; tlen -= len; ASSERT(tlen >= 0); *csp = NULL; /* NULL terminate array of pointers */ ncompat = csp - compatp; /* * When determining a nodename, a nodename_aliases specified * mapping has precedence over using a driver_aliases specified * driver binding as a nodename. * * See if any of the compatible forms have a nodename_aliases * specified nodename. These mappings are described by * nodename_aliases entries like: * * disk "scsiclass,00" * enclosure "scsiclass,03.vSYMBIOS.pD1000" * ssd "scsa,00.bfcp" * * All nodename_aliases mappings should idealy be to generic * names, however a higher precedence legacy mapping to a * driver name may exist. The highest precedence mapping * provides the nodename, so legacy driver nodename mappings * (if they exist) take precedence over generic nodename * mappings. */ for (nname = NULL, csp = compatp; (nname == NULL) && *csp; csp++) { for (nap = na; nap->na_nodename; nap++) { if (strcmp(*csp, nap->na_alias) == 0) { nname = nap->na_nodename; break; } } } /* * Determine the driver name based on compatible (which may * have the passed in compat0 as the first item). The driver_aliases * file has entries like * * sd "scsiclass,00" * * that map compatible forms to specific drivers. These entries are * established by add_drv/update_drv. We use the most specific * driver binding as the nodename. This matches the eventual * ddi_driver_compatible_major() binding that will be * established by bind_node() */ for (dname = NULL, csp = compatp; *csp; csp++) { major = ddi_name_to_major(*csp); if ((major == DDI_MAJOR_T_NONE) || (devnamesp[major].dn_flags & DN_DRIVER_REMOVED)) continue; if (dname = ddi_major_to_name(major)) break; } /* * If no nodename_aliases mapping exists then use the * driver_aliases specified driver binding as a nodename. */ if (nname == NULL) nname = dname; /* return results */ if (nname) { *nodenamep = kmem_alloc(strlen(nname) + 1, KM_SLEEP); (void) strcpy(*nodenamep, nname); } else { *nodenamep = NULL; /* * If no nodename could be determined return a special * 'compatible' to be used for a diagnostic message. This * compatible contains all compatible forms concatenated * into a single string pointed to by the first element. */ for (csp = compatp; *(csp + 1); csp++) *((*csp) + strlen(*csp)) = ' '; *(compatp + 1) = NULL; ncompat = 1; } if (drivernamep) { if (dname) { *drivernamep = kmem_alloc(strlen(dname) + 1, KM_SLEEP); (void) strcpy(*drivernamep, dname); } else *drivernamep = NULL; } *compatiblep = compatp; *ncompatiblep = ncompat; } /* * Free allocations associated with scsi_hba_ident_nodename_compatible_get. */ static void scsi_hba_ident_nodename_compatible_free(char *nodename, char *drivername, char **compatible) { if (nodename) kmem_free(nodename, strlen(nodename) + 1); if (drivername) kmem_free(drivername, strlen(drivername) + 1); if (compatible) kmem_free(compatible, (NCOMPAT * sizeof (char *)) + (NCOMPAT * COMPAT_LONGEST)); } void scsi_hba_nodename_compatible_get(struct scsi_inquiry *inq, char *binding_set, int dtype_node, char *compat0, char **nodenamep, char ***compatiblep, int *ncompatiblep) { scsi_hba_ident_nodename_compatible_get(inq, NULL, 0, NULL, 0, binding_set, dtype_node, compat0, nodenamep, NULL, compatiblep, ncompatiblep); } void scsi_hba_nodename_compatible_free(char *nodename, char **compatible) { scsi_hba_ident_nodename_compatible_free(nodename, NULL, compatible); } /* return the unit_address associated with a scsi_device */ char * scsi_device_unit_address(struct scsi_device *sd) { mdi_pathinfo_t *pip; ASSERT(sd && sd->sd_dev); if ((sd == NULL) || (sd->sd_dev == NULL)) return (NULL); pip = (mdi_pathinfo_t *)sd->sd_pathinfo; if (pip) return (mdi_pi_get_addr(pip)); else return (ddi_get_name_addr(sd->sd_dev)); } /* scsi_device property interfaces */ #define _TYPE_DEFINED(flags) \ (((flags & SCSI_DEVICE_PROP_TYPE_MSK) == SCSI_DEVICE_PROP_PATH) || \ ((flags & SCSI_DEVICE_PROP_TYPE_MSK) == SCSI_DEVICE_PROP_DEVICE)) #define _DEVICE_PIP(sd, flags) \ ((((flags & SCSI_DEVICE_PROP_TYPE_MSK) == SCSI_DEVICE_PROP_PATH) && \ sd->sd_pathinfo) ? (mdi_pathinfo_t *)sd->sd_pathinfo : NULL) int scsi_device_prop_get_int(struct scsi_device *sd, uint_t flags, char *name, int defval) { mdi_pathinfo_t *pip; int v = defval; int data; int rv; ASSERT(sd && name && sd->sd_dev && _TYPE_DEFINED(flags)); if ((sd == NULL) || (name == NULL) || (sd->sd_dev == NULL) || !_TYPE_DEFINED(flags)) return (v); pip = _DEVICE_PIP(sd, flags); if (pip) { rv = mdi_prop_lookup_int(pip, name, &data); if (rv == DDI_PROP_SUCCESS) v = data; } else v = ddi_prop_get_int(DDI_DEV_T_ANY, sd->sd_dev, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, name, v); return (v); } int64_t scsi_device_prop_get_int64(struct scsi_device *sd, uint_t flags, char *name, int64_t defval) { mdi_pathinfo_t *pip; int64_t v = defval; int64_t data; int rv; ASSERT(sd && name && sd->sd_dev && _TYPE_DEFINED(flags)); if ((sd == NULL) || (name == NULL) || (sd->sd_dev == NULL) || !_TYPE_DEFINED(flags)) return (v); pip = _DEVICE_PIP(sd, flags); if (pip) { rv = mdi_prop_lookup_int64(pip, name, &data); if (rv == DDI_PROP_SUCCESS) v = data; } else v = ddi_prop_get_int64(DDI_DEV_T_ANY, sd->sd_dev, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, name, v); return (v); } int scsi_device_prop_lookup_byte_array(struct scsi_device *sd, uint_t flags, char *name, uchar_t **data, uint_t *nelements) { mdi_pathinfo_t *pip; int rv; ASSERT(sd && name && sd->sd_dev && _TYPE_DEFINED(flags)); if ((sd == NULL) || (name == NULL) || (sd->sd_dev == NULL) || !_TYPE_DEFINED(flags)) return (DDI_PROP_INVAL_ARG); pip = _DEVICE_PIP(sd, flags); if (pip) rv = mdi_prop_lookup_byte_array(pip, name, data, nelements); else rv = ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, sd->sd_dev, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, name, data, nelements); return (rv); } int scsi_device_prop_lookup_int_array(struct scsi_device *sd, uint_t flags, char *name, int **data, uint_t *nelements) { mdi_pathinfo_t *pip; int rv; ASSERT(sd && name && sd->sd_dev && _TYPE_DEFINED(flags)); if ((sd == NULL) || (name == NULL) || (sd->sd_dev == NULL) || !_TYPE_DEFINED(flags)) return (DDI_PROP_INVAL_ARG); pip = _DEVICE_PIP(sd, flags); if (pip) rv = mdi_prop_lookup_int_array(pip, name, data, nelements); else rv = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, sd->sd_dev, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, name, data, nelements); return (rv); } int scsi_device_prop_lookup_string(struct scsi_device *sd, uint_t flags, char *name, char **data) { mdi_pathinfo_t *pip; int rv; ASSERT(sd && name && sd->sd_dev && _TYPE_DEFINED(flags)); if ((sd == NULL) || (name == NULL) || (sd->sd_dev == NULL) || !_TYPE_DEFINED(flags)) return (DDI_PROP_INVAL_ARG); pip = _DEVICE_PIP(sd, flags); if (pip) rv = mdi_prop_lookup_string(pip, name, data); else rv = ddi_prop_lookup_string(DDI_DEV_T_ANY, sd->sd_dev, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, name, data); return (rv); } int scsi_device_prop_lookup_string_array(struct scsi_device *sd, uint_t flags, char *name, char ***data, uint_t *nelements) { mdi_pathinfo_t *pip; int rv; ASSERT(sd && name && sd->sd_dev && _TYPE_DEFINED(flags)); if ((sd == NULL) || (name == NULL) || (sd->sd_dev == NULL) || !_TYPE_DEFINED(flags)) return (DDI_PROP_INVAL_ARG); pip = _DEVICE_PIP(sd, flags); if (pip) rv = mdi_prop_lookup_string_array(pip, name, data, nelements); else rv = ddi_prop_lookup_string_array(DDI_DEV_T_ANY, sd->sd_dev, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, name, data, nelements); return (rv); } int scsi_device_prop_update_byte_array(struct scsi_device *sd, uint_t flags, char *name, uchar_t *data, uint_t nelements) { mdi_pathinfo_t *pip; int rv; ASSERT(sd && name && sd->sd_dev && _TYPE_DEFINED(flags)); if ((sd == NULL) || (name == NULL) || (sd->sd_dev == NULL) || !_TYPE_DEFINED(flags)) return (DDI_PROP_INVAL_ARG); pip = _DEVICE_PIP(sd, flags); if (pip) rv = mdi_prop_update_byte_array(pip, name, data, nelements); else rv = ndi_prop_update_byte_array(DDI_DEV_T_NONE, sd->sd_dev, name, data, nelements); return (rv); } int scsi_device_prop_update_int(struct scsi_device *sd, uint_t flags, char *name, int data) { mdi_pathinfo_t *pip; int rv; ASSERT(sd && name && sd->sd_dev && _TYPE_DEFINED(flags)); if ((sd == NULL) || (name == NULL) || (sd->sd_dev == NULL) || !_TYPE_DEFINED(flags)) return (DDI_PROP_INVAL_ARG); pip = _DEVICE_PIP(sd, flags); if (pip) rv = mdi_prop_update_int(pip, name, data); else rv = ndi_prop_update_int(DDI_DEV_T_NONE, sd->sd_dev, name, data); return (rv); } int scsi_device_prop_update_int64(struct scsi_device *sd, uint_t flags, char *name, int64_t data) { mdi_pathinfo_t *pip; int rv; ASSERT(sd && name && sd->sd_dev && _TYPE_DEFINED(flags)); if ((sd == NULL) || (name == NULL) || (sd->sd_dev == NULL) || !_TYPE_DEFINED(flags)) return (DDI_PROP_INVAL_ARG); pip = _DEVICE_PIP(sd, flags); if (pip) rv = mdi_prop_update_int64(pip, name, data); else rv = ndi_prop_update_int64(DDI_DEV_T_NONE, sd->sd_dev, name, data); return (rv); } int scsi_device_prop_update_int_array(struct scsi_device *sd, uint_t flags, char *name, int *data, uint_t nelements) { mdi_pathinfo_t *pip; int rv; ASSERT(sd && name && sd->sd_dev && _TYPE_DEFINED(flags)); if ((sd == NULL) || (name == NULL) || (sd->sd_dev == NULL) || !_TYPE_DEFINED(flags)) return (DDI_PROP_INVAL_ARG); pip = _DEVICE_PIP(sd, flags); if (pip) rv = mdi_prop_update_int_array(pip, name, data, nelements); else rv = ndi_prop_update_int_array(DDI_DEV_T_NONE, sd->sd_dev, name, data, nelements); return (rv); } int scsi_device_prop_update_string(struct scsi_device *sd, uint_t flags, char *name, char *data) { mdi_pathinfo_t *pip; int rv; ASSERT(sd && name && sd->sd_dev && _TYPE_DEFINED(flags)); if ((sd == NULL) || (name == NULL) || (sd->sd_dev == NULL) || !_TYPE_DEFINED(flags)) return (DDI_PROP_INVAL_ARG); pip = _DEVICE_PIP(sd, flags); if (pip) rv = mdi_prop_update_string(pip, name, data); else rv = ndi_prop_update_string(DDI_DEV_T_NONE, sd->sd_dev, name, data); return (rv); } int scsi_device_prop_update_string_array(struct scsi_device *sd, uint_t flags, char *name, char **data, uint_t nelements) { mdi_pathinfo_t *pip; int rv; ASSERT(sd && name && sd->sd_dev && _TYPE_DEFINED(flags)); if ((sd == NULL) || (name == NULL) || (sd->sd_dev == NULL) || !_TYPE_DEFINED(flags)) return (DDI_PROP_INVAL_ARG); pip = _DEVICE_PIP(sd, flags); if (pip) rv = mdi_prop_update_string_array(pip, name, data, nelements); else rv = ndi_prop_update_string_array(DDI_DEV_T_NONE, sd->sd_dev, name, data, nelements); return (rv); } int scsi_device_prop_remove(struct scsi_device *sd, uint_t flags, char *name) { mdi_pathinfo_t *pip; int rv; ASSERT(sd && name && sd->sd_dev && _TYPE_DEFINED(flags)); if ((sd == NULL) || (name == NULL) || (sd->sd_dev == NULL) || !_TYPE_DEFINED(flags)) return (DDI_PROP_INVAL_ARG); pip = _DEVICE_PIP(sd, flags); if (pip) rv = mdi_prop_remove(pip, name); else rv = ndi_prop_remove(DDI_DEV_T_NONE, sd->sd_dev, name); return (rv); } void scsi_device_prop_free(struct scsi_device *sd, uint_t flags, void *data) { mdi_pathinfo_t *pip; ASSERT(sd && data && sd->sd_dev && _TYPE_DEFINED(flags)); if ((sd == NULL) || (data == NULL) || (sd->sd_dev == NULL) || !_TYPE_DEFINED(flags)) return; pip = _DEVICE_PIP(sd, flags); if (pip) (void) mdi_prop_free(data); else ddi_prop_free(data); } /* SMP device property interfaces */ int smp_device_prop_get_int(struct smp_device *smp_sd, char *name, int defval) { int v = defval; ASSERT(smp_sd && name && smp_sd->smp_sd_dev); if ((smp_sd == NULL) || (name == NULL) || (smp_sd->smp_sd_dev == NULL)) return (v); v = ddi_prop_get_int(DDI_DEV_T_ANY, smp_sd->smp_sd_dev, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, name, v); return (v); } int64_t smp_device_prop_get_int64(struct smp_device *smp_sd, char *name, int64_t defval) { int64_t v = defval; ASSERT(smp_sd && name && smp_sd->smp_sd_dev); if ((smp_sd == NULL) || (name == NULL) || (smp_sd->smp_sd_dev == NULL)) return (v); v = ddi_prop_get_int64(DDI_DEV_T_ANY, smp_sd->smp_sd_dev, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, name, v); return (v); } int smp_device_prop_lookup_byte_array(struct smp_device *smp_sd, char *name, uchar_t **data, uint_t *nelements) { int rv; ASSERT(smp_sd && name && smp_sd->smp_sd_dev); if ((smp_sd == NULL) || (name == NULL) || (smp_sd->smp_sd_dev == NULL)) return (DDI_PROP_INVAL_ARG); rv = ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, smp_sd->smp_sd_dev, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, name, data, nelements); return (rv); } int smp_device_prop_lookup_int_array(struct smp_device *smp_sd, char *name, int **data, uint_t *nelements) { int rv; ASSERT(smp_sd && name && smp_sd->smp_sd_dev); if ((smp_sd == NULL) || (name == NULL) || (smp_sd->smp_sd_dev == NULL)) return (DDI_PROP_INVAL_ARG); rv = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, smp_sd->smp_sd_dev, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, name, data, nelements); return (rv); } int smp_device_prop_lookup_string(struct smp_device *smp_sd, char *name, char **data) { int rv; ASSERT(smp_sd && name && smp_sd->smp_sd_dev); if ((smp_sd == NULL) || (name == NULL) || (smp_sd->smp_sd_dev == NULL)) return (DDI_PROP_INVAL_ARG); rv = ddi_prop_lookup_string(DDI_DEV_T_ANY, smp_sd->smp_sd_dev, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, name, data); return (rv); } int smp_device_prop_lookup_string_array(struct smp_device *smp_sd, char *name, char ***data, uint_t *nelements) { int rv; ASSERT(smp_sd && name && smp_sd->smp_sd_dev); if ((smp_sd == NULL) || (name == NULL) || (smp_sd->smp_sd_dev == NULL)) return (DDI_PROP_INVAL_ARG); rv = ddi_prop_lookup_string_array(DDI_DEV_T_ANY, smp_sd->smp_sd_dev, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, name, data, nelements); return (rv); } int smp_device_prop_update_byte_array(struct smp_device *smp_sd, char *name, uchar_t *data, uint_t nelements) { int rv; ASSERT(smp_sd && name && smp_sd->smp_sd_dev); if ((smp_sd == NULL) || (name == NULL) || (smp_sd->smp_sd_dev == NULL)) return (DDI_PROP_INVAL_ARG); rv = ndi_prop_update_byte_array(DDI_DEV_T_NONE, smp_sd->smp_sd_dev, name, data, nelements); return (rv); } int smp_device_prop_update_int(struct smp_device *smp_sd, char *name, int data) { int rv; ASSERT(smp_sd && name && smp_sd->smp_sd_dev); if ((smp_sd == NULL) || (name == NULL) || (smp_sd->smp_sd_dev == NULL)) return (DDI_PROP_INVAL_ARG); rv = ndi_prop_update_int(DDI_DEV_T_NONE, smp_sd->smp_sd_dev, name, data); return (rv); } int smp_device_prop_update_int64(struct smp_device *smp_sd, char *name, int64_t data) { int rv; ASSERT(smp_sd && name && smp_sd->smp_sd_dev); if ((smp_sd == NULL) || (name == NULL) || (smp_sd->smp_sd_dev == NULL)) return (DDI_PROP_INVAL_ARG); rv = ndi_prop_update_int64(DDI_DEV_T_NONE, smp_sd->smp_sd_dev, name, data); return (rv); } int smp_device_prop_update_int_array(struct smp_device *smp_sd, char *name, int *data, uint_t nelements) { int rv; ASSERT(smp_sd && name && smp_sd->smp_sd_dev); if ((smp_sd == NULL) || (name == NULL) || (smp_sd->smp_sd_dev == NULL)) return (DDI_PROP_INVAL_ARG); rv = ndi_prop_update_int_array(DDI_DEV_T_NONE, smp_sd->smp_sd_dev, name, data, nelements); return (rv); } int smp_device_prop_update_string(struct smp_device *smp_sd, char *name, char *data) { int rv; ASSERT(smp_sd && name && smp_sd->smp_sd_dev); if ((smp_sd == NULL) || (name == NULL) || (smp_sd->smp_sd_dev == NULL)) return (DDI_PROP_INVAL_ARG); rv = ndi_prop_update_string(DDI_DEV_T_NONE, smp_sd->smp_sd_dev, name, data); return (rv); } int smp_device_prop_update_string_array(struct smp_device *smp_sd, char *name, char **data, uint_t nelements) { int rv; ASSERT(smp_sd && name && smp_sd->smp_sd_dev); if ((smp_sd == NULL) || (name == NULL) || (smp_sd->smp_sd_dev == NULL)) return (DDI_PROP_INVAL_ARG); rv = ndi_prop_update_string_array(DDI_DEV_T_NONE, smp_sd->smp_sd_dev, name, data, nelements); return (rv); } int smp_device_prop_remove(struct smp_device *smp_sd, char *name) { int rv; ASSERT(smp_sd && name && smp_sd->smp_sd_dev); if ((smp_sd == NULL) || (name == NULL) || (smp_sd->smp_sd_dev == NULL)) return (DDI_PROP_INVAL_ARG); rv = ndi_prop_remove(DDI_DEV_T_NONE, smp_sd->smp_sd_dev, name); return (rv); } void smp_device_prop_free(struct smp_device *smp_sd, void *data) { ASSERT(smp_sd && data && smp_sd->smp_sd_dev); if ((smp_sd == NULL) || (data == NULL) || (smp_sd->smp_sd_dev == NULL)) return; ddi_prop_free(data); } /* * scsi_hba_ua_set: given "unit-address" string, set properties. * * Function to set the properties on a devinfo or pathinfo node from * the "unit-address" part of a "name@unit-address" /devices path 'name' * string. * * This function works in conjunction with scsi_ua_get()/scsi_hba_ua_get() * (and possibly with an HBA driver's tran_tgt_init() implementation). */ static int scsi_hba_ua_set(char *ua, dev_info_t *dchild, mdi_pathinfo_t *pchild) { char *p; int tgt; char *tgt_port_end; char *tgt_port; int tgt_port_len; int sfunc; scsi_lun64_t lun64; /* Caller must choose to decorate devinfo *or* pathinfo */ ASSERT((dchild != NULL) ^ (pchild != NULL)); if (dchild && pchild) return (0); /* * generic implementation based on "tgt,lun[,sfunc]" address form. * parse hex "tgt" part of "tgt,lun[,sfunc]" */ p = ua; tgt_port_end = NULL; for (tgt = 0; *p && *p != ','; p++) { if (*p >= '0' && *p <= '9') tgt = (tgt << 4) + (*p - '0'); else if (*p >= 'a' && *p <= 'f') tgt = (tgt << 4) + 10 + (*p - 'a'); else tgt = -1; /* non-numeric */ /* * if non-numeric or our of range set tgt to -1 and * skip forward */ if (tgt < 0) { tgt = -1; for (; *p && *p != ','; p++) ; break; } } tgt_port_end = p; /* parse hex ",lun" part of "tgt,lun[,sfunc]" */ if (*p) p++; for (lun64 = 0; *p && *p != ','; p++) { if (*p >= '0' && *p <= '9') lun64 = (lun64 << 4) + (*p - '0'); else if (*p >= 'a' && *p <= 'f') lun64 = (lun64 << 4) + 10 + (*p - 'a'); else return (0); } /* parse hex ",sfunc" part of "tgt,lun[,sfunc]" */ if (*p) { p++; for (sfunc = 0; *p; p++) { if (*p >= '0' && *p <= '9') sfunc = (sfunc << 4) + (*p - '0'); else if (*p >= 'a' && *p <= 'f') sfunc = (sfunc << 4) + 10 + (*p - 'a'); else return (0); } } else sfunc = -1; if (dchild) { /* * Decorate a devinfo node with unit address properties. * This adds the the addressing properties needed to * DDI_CTLOPS_UNINITCHILD the devinfo node (i.e. perform * the reverse operation - form unit address from properties). */ if ((tgt != -1) && (ndi_prop_update_int(DDI_DEV_T_NONE, dchild, SCSI_ADDR_PROP_TARGET, tgt) != DDI_PROP_SUCCESS)) return (0); if (tgt_port_end) { tgt_port_len = tgt_port_end - ua + 1; tgt_port = kmem_alloc(tgt_port_len, KM_SLEEP); (void) strlcpy(tgt_port, ua, tgt_port_len); if (ndi_prop_update_string(DDI_DEV_T_NONE, dchild, SCSI_ADDR_PROP_TARGET_PORT, tgt_port) != DDI_PROP_SUCCESS) { kmem_free(tgt_port, tgt_port_len); return (0); } kmem_free(tgt_port, tgt_port_len); } /* Set the appropriate lun properties. */ if (lun64 < SCSI_32LUNS_PER_TARGET) { if (ndi_prop_update_int(DDI_DEV_T_NONE, dchild, SCSI_ADDR_PROP_LUN, (int)lun64) != DDI_PROP_SUCCESS) return (0); } if (ndi_prop_update_int64(DDI_DEV_T_NONE, dchild, SCSI_ADDR_PROP_LUN64, lun64) != DDI_PROP_SUCCESS) return (0); /* Set the sfunc property */ if ((sfunc != -1) && (ndi_prop_update_int(DDI_DEV_T_NONE, dchild, SCSI_ADDR_PROP_SFUNC, (int)sfunc) != DDI_PROP_SUCCESS)) return (0); } else if (pchild) { /* * Decorate a pathinfo node with unit address properties. */ if ((tgt != -1) && (mdi_prop_update_int(pchild, SCSI_ADDR_PROP_TARGET, tgt) != DDI_PROP_SUCCESS)) return (0); if (tgt_port_end) { tgt_port_len = tgt_port_end - ua + 1; tgt_port = kmem_alloc(tgt_port_len, KM_SLEEP); (void) strlcpy(tgt_port, ua, tgt_port_len); if (mdi_prop_update_string(pchild, SCSI_ADDR_PROP_TARGET_PORT, tgt_port) != DDI_PROP_SUCCESS) { kmem_free(tgt_port, tgt_port_len); return (0); } kmem_free(tgt_port, tgt_port_len); } /* Set the appropriate lun properties */ if (lun64 < SCSI_32LUNS_PER_TARGET) { if (mdi_prop_update_int(pchild, SCSI_ADDR_PROP_LUN, (int)lun64) != DDI_PROP_SUCCESS) return (0); } if (mdi_prop_update_int64(pchild, SCSI_ADDR_PROP_LUN64, lun64) != DDI_PROP_SUCCESS) return (0); /* Set the sfunc property */ if ((sfunc != -1) && (mdi_prop_update_int(pchild, SCSI_ADDR_PROP_SFUNC, (int)sfunc) != DDI_PROP_SUCCESS)) return (0); } return (1); } /* * Private ndi_devi_find/mdi_pi_find implementation - find the child * dev_info/path_info of self whose phci name matches "name@caddr". * We have our own implementation because we need to search with both * forms of sibling lists (dev_info and path_info) and we need to be able * to search with a NULL name in order to find siblings already associated * with a given unit-address (same @addr). NOTE: NULL name search will never * return probe node. * * If pchildp is NULL and we find a pathinfo child, we return the client * devinfo node in *dchildp. * * The init flag argument should be clear when called from places where * recursion could occur (like scsi_busctl_initchild) and when the caller * has already performed a search for name@addr with init set (performance). * * Future: Integrate ndi_devi_findchild_by_callback into scsi_findchild. */ static int scsi_findchild(dev_info_t *self, char *name, char *addr, int init, dev_info_t **dchildp, mdi_pathinfo_t **pchildp, int *ppi) { dev_info_t *dchild; /* devinfo child */ mdi_pathinfo_t *pchild; /* pathinfo child */ int found = CHILD_TYPE_NONE; char *daddr; ASSERT(self && DEVI_BUSY_OWNED(self)); ASSERT(addr && dchildp); if ((self == NULL) || (addr == NULL) || (dchildp == NULL)) return (CHILD_TYPE_NONE); *dchildp = NULL; if (pchildp) *pchildp = NULL; if (ppi) *ppi = 0; /* Walk devinfo child list to find a match */ for (dchild = ddi_get_child(self); dchild; dchild = ddi_get_next_sibling(dchild)) { if (i_ddi_node_state(dchild) < DS_INITIALIZED) continue; daddr = ddi_get_name_addr(dchild); if (daddr && (strcmp(addr, daddr) == 0) && ((name == NULL) || (strcmp(name, DEVI(dchild)->devi_node_name) == 0))) { /* * If we are asked to find "anything" at a given * unit-address (name == NULL), we don't realy want * to find the 'probe' node. The existance of * a probe node on a 'name == NULL' search should * fail. This will trigger slow-path code where * we explicity look for, and synchronize against, * a node named "probe" at the unit-address. */ if ((name == NULL) && scsi_hba_devi_is_barrier(dchild)) { SCSI_HBA_LOG((_LOG(4), NULL, dchild, "%s@%s 'probe' devinfo found, skip", name ? name : "", addr)); continue; } /* We have found a match. */ found |= CHILD_TYPE_DEVINFO; SCSI_HBA_LOG((_LOG(4), NULL, dchild, "%s@%s devinfo found", name ? name : "", addr)); *dchildp = dchild; /* devinfo found */ break; } } /* * Walk pathinfo child list to find a match. * * NOTE: Unlike devinfo nodes, pathinfo nodes have a string searchable * unit-address from creation - so there is no need for an 'init' * search block of code for pathinfo nodes below. */ pchild = mdi_pi_find(self, NULL, addr); if (pchild) { /* * NOTE: If name specified and we match a pathinfo unit * address, we don't check the client node name. */ if (ppi) *ppi = mdi_pi_get_path_instance(pchild); found |= CHILD_TYPE_PATHINFO; if (pchildp) { SCSI_HBA_LOG((_LOG(4), self, NULL, "%s pathinfo found", mdi_pi_spathname(pchild))); *pchildp = pchild; /* pathinfo found */ } else if (*dchildp == NULL) { /* * Did not find a devinfo node, found a pathinfo node, * but caller did not ask us to return a pathinfo node: * we return the 'client' devinfo node instead (but * with CHILD_TYPE_PATHINFO 'found' return value). */ dchild = mdi_pi_get_client(pchild); SCSI_HBA_LOG((_LOG(4), NULL, dchild, "%s pathinfo found, client switch", mdi_pi_spathname(pchild))); /* * A pathinfo node always has a 'client' devinfo node, * but we need to ensure that the 'client' is * initialized and has a scsi_device structure too. */ ASSERT(dchild); if (i_ddi_node_state(dchild) < DS_INITIALIZED) { SCSI_HBA_LOG((_LOG(4), NULL, dchild, "%s found client, initchild", mdi_pi_spathname(pchild))); (void) ddi_initchild(ddi_get_parent(dchild), dchild); } if (i_ddi_node_state(dchild) >= DS_INITIALIZED) { /* client found and initialized */ *dchildp = dchild; } else { SCSI_HBA_LOG((_LOG(4), NULL, dchild, "%s found client, but failed initchild", mdi_pi_spathname(pchild))); } } } /* Try devinfo again with initchild of uninitialized nodes */ if ((found == CHILD_TYPE_NONE) && init) { for (dchild = ddi_get_child(self); dchild; dchild = ddi_get_next_sibling(dchild)) { /* skip if checked above */ if (i_ddi_node_state(dchild) >= DS_INITIALIZED) continue; /* attempt initchild to establish unit-address */ (void) ddi_initchild(self, dchild); if (i_ddi_node_state(dchild) < DS_INITIALIZED) continue; daddr = ddi_get_name_addr(dchild); if (daddr && ((name == NULL) || (strcmp(name, DEVI(dchild)->devi_node_name) == 0)) && (strcmp(addr, daddr) == 0)) { found |= CHILD_TYPE_DEVINFO; SCSI_HBA_LOG((_LOG(4), NULL, dchild, "%s@%s devinfo found post initchild", name ? name : "", addr)); *dchildp = dchild; /* devinfo found */ break; /* node found */ } } } /* * We should never find devinfo and pathinfo at the same * unit-address. */ ASSERT(found != (CHILD_TYPE_DEVINFO | CHILD_TYPE_PATHINFO)); if (found == (CHILD_TYPE_DEVINFO | CHILD_TYPE_PATHINFO)) { found = CHILD_TYPE_NONE; *dchildp = NULL; *pchildp = NULL; } return (found); } /* * Given information about a child device (contained on probe node) construct * and return a pointer to the dynamic SID devinfo node associated with the * device. In the creation of this SID node a compatible property for the * device is formed and used to establish a nodename (via * /etc/nodename_aliases) and to bind a driver (via /etc/driver_aliases). * * If this routine is called then we got a response from a device and * obtained the inquiry data from the device. Some inquiry results indicate * that the specific LUN we addressed does not exist, and we don't want to * bind a standard target driver to the node we create. Even though the * specific LUN is not usable, the framework may still want to bind a * target driver to the device for internal communication with the device - * an example would be issuing a report_lun to enumerate other LUNs under a * DPQ_NEVER LUN0. Another example would be wanting to known that the * DPQ_NEVER LUN0 device exists in BUS_CONFIG_ONE for non-existent LUN * caching optimizations. To support this we let the caller specify a * compatible property (or driver). If LUN0 inquiry data indicates that the * LUN does not exist then we establish compat0 as the highest precedence(0) * compatible form. If used, this compat0 driver will never be called on to * issue external commands to the device. * * If no driver binds to the device using driver_alias we establish the driver * passed in as the node name. */ extern int e_devid_cache_pathinfo(mdi_pathinfo_t *, ddi_devid_t); static int scsi_device_createchild(dev_info_t *self, char *addr, scsi_enum_t se, struct scsi_device *sdprobe, dev_info_t **dchildp, mdi_pathinfo_t **pchildp) { scsi_lun64_t lun64; int dtype; int dpq; int dpq_vu; int dtype_node; int lunexists; char *compat0; char *nname; char **compat = NULL; int ncompat; dev_info_t *dchild = NULL; mdi_pathinfo_t *pchild = NULL; dev_info_t *probe = sdprobe->sd_dev; struct scsi_inquiry *inq = sdprobe->sd_inq; uchar_t *inq80 = NULL; uchar_t *inq83 = NULL; uint_t inq80len, inq83len; char *binding_set = NULL; char *dname = NULL; ddi_devid_t devid; int have_devid = 0; ddi_devid_t cdevid; int have_cdevid = 0; char *devid_str; char *guid = NULL; ASSERT(self && addr && *addr && DEVI_BUSY_OWNED(self)); ASSERT(dchildp && pchildp); /* * Determine the lun and whether the lun exists. We may need to create * a node for LUN0 (with compat0 driver binding) even if the lun does * not exist - so we can run report_lun to find additional LUNs. */ lun64 = scsi_addr_to_lun64(addr); dtype = inq->inq_dtype & DTYPE_MASK; /* device */ dpq = inq->inq_dtype & DPQ_MASK; dpq_vu = inq->inq_dtype & DPQ_VUNIQ ? 1 : 0; dtype_node = scsi_addr_to_sfunc(addr); /* secondary function */ if (dtype_node == -1) dtype_node = dtype; /* node for device */ lunexists = (dtype != dtype_node) || /* override */ ((dpq_vu == 0) && (dpq == DPQ_POSSIBLE)) || /* ANSII */ (dpq_vu && (lun64 == 0)); /* VU LUN0 */ if (dtype == DTYPE_UNKNOWN) lunexists = 0; SCSI_HBA_LOG((_LOG(4), self, NULL, "@%s dtype %x %x dpq_vu %d dpq %x: %d", addr, dtype, dtype_node, dpq_vu, dpq, lunexists)); /* A non-existent LUN0 uses compatible_nodev. */ if (lunexists) { compat0 = NULL; /* compat0 not needed */ } else if (lun64 == 0) { compat0 = compatible_nodev; SCSI_HBA_LOG((_LOG(2), self, NULL, "@%s lun 0 with compat0 %s", addr, compat0)); } else goto out; /* no node created */ /* Obtain identity information from probe node. */ if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, probe, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "inquiry-page-80", &inq80, &inq80len) != DDI_PROP_SUCCESS) inq80 = NULL; if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, probe, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "inquiry-page-83", &inq83, &inq83len) != DDI_PROP_SUCCESS) inq83 = NULL; /* Get "scsi-binding-set" property (if there is one). */ if (ddi_prop_lookup_string(DDI_DEV_T_ANY, self, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "scsi-binding-set", &binding_set) == DDI_PROP_SUCCESS) SCSI_HBA_LOG((_LOG(2), NULL, probe, "binding_set '%s'", binding_set)); /* determine the node name and compatible information */ scsi_hba_ident_nodename_compatible_get(inq, inq80, inq80len, inq83, inq83len, binding_set, dtype_node, compat0, &nname, &dname, &compat, &ncompat); if (nname == NULL) { /* * We will not be able to create a node because we could not * determine a node name. Print out a NODRIVER level warning * message with the compatible forms for the device. Note that * there may be a driver.conf node that attaches to the device, * which is why we only produce this warning message for debug * kernels. */ SCSI_HBA_LOG((_LOG(1), NULL, self, "no node_name for device @%s:\n compatible: %s", addr, *compat)); goto out; } /* * FUTURE: some day we may want an accurate "compatible" on the probe * node so that vhci_is_dev_supported() in scsi_vhci could, at * least in part, determine/configure based on "compatible". * * if (ndi_prop_update_string_array(DDI_DEV_T_NONE, probe, * "compatible", compat, ncompat) != DDI_PROP_SUCCESS) { * SCSI_HBA_LOG((_LOG(3), self, NULL, * "%s@%s failed probe compatible decoration", * nname, addr)); * goto out; * } */ /* Encode devid from identity information. */ if (ddi_devid_scsi_encode(DEVID_SCSI_ENCODE_VERSION_LATEST, dname, (uchar_t *)inq, sizeof (*inq), inq80, inq80len, inq83, inq83len, &devid) == DDI_SUCCESS) { have_devid = 1; /* Attempt to form guid from devid. */ guid = ddi_devid_to_guid(devid); /* Produce string devid for debug. */ devid_str = ddi_devid_str_encode(devid, NULL); SCSI_HBA_LOG((_LOG(3), self, probe, "devid '%s' guid '%s'", devid_str ? devid_str : "NULL", guid ? guid : "NULL")); ddi_devid_str_free(devid_str); } /* * Determine if the device should be enumerated as under the vHCI * (client node) or under the pHCI. By convention scsi_vhci expects * the "cinfo" argument identity information to be represented as a * devinfo node with the needed information (i.e. the pHCI probe node). */ if ((guid == NULL) || (mdi_is_dev_supported(MDI_HCI_CLASS_SCSI, self, sdprobe) != MDI_SUCCESS)) { SCSI_HBA_LOG((_LOG(3), self, probe, "==> devinfo")); /* * Enumerate under pHCI: * * Create dynamic SID dchild node. No attempt is made to * transfer information (except the addressing and identity * information) from the probe node to the dynamic node since * there may be HBA specific side effects that the framework * does not known how to transfer. */ ndi_devi_alloc_sleep(self, nname, (se == SE_HP) ? DEVI_SID_HP_NODEID : DEVI_SID_NODEID, &dchild); ASSERT(dchild); ndi_flavor_set(dchild, SCSA_FLAVOR_SCSI_DEVICE); /* * Decorate new node with addressing properties (via * scsi_hba_ua_set()), compatible, identity information, and * class. */ if ((scsi_hba_ua_set(addr, dchild, NULL) == 0) || (ndi_prop_update_string_array(DDI_DEV_T_NONE, dchild, "compatible", compat, ncompat) != DDI_PROP_SUCCESS) || (inq80 && (ndi_prop_update_byte_array(DDI_DEV_T_NONE, dchild, "inquiry-page-80", inq80, inq80len) != DDI_PROP_SUCCESS)) || (inq83 && (ndi_prop_update_byte_array(DDI_DEV_T_NONE, dchild, "inquiry-page-83", inq83, inq83len) != DDI_PROP_SUCCESS)) || (ndi_prop_update_string(DDI_DEV_T_NONE, dchild, "class", "scsi") != DDI_PROP_SUCCESS)) { SCSI_HBA_LOG((_LOG(2), self, NULL, "devinfo @%s failed decoration", addr)); (void) scsi_hba_remove_node(dchild); dchild = NULL; goto out; } /* Bind the driver */ if (ndi_devi_bind_driver(dchild, 0) != NDI_SUCCESS) { /* need to bind in order to register a devid */ SCSI_HBA_LOG((_LOGCFG, NULL, dchild, "devinfo @%s created, no driver-> " "no devid_register", addr)); goto out; } /* Register devid */ if (have_devid) { if (ddi_devid_register(dchild, devid) == DDI_FAILURE) SCSI_HBA_LOG((_LOG(1), NULL, dchild, "devinfo @%s created, " "devid register failed", addr)); else SCSI_HBA_LOG((_LOG(2), NULL, dchild, "devinfo @%s created with devid", addr)); } else SCSI_HBA_LOG((_LOG(2), NULL, dchild, "devinfo @%s created, no devid", addr)); } else { /* * Enumerate under vHCI: * * Create a pathinfo pchild node. */ SCSI_HBA_LOG((_LOG(3), self, probe, "==>pathinfo")); if (mdi_pi_alloc_compatible(self, nname, guid, addr, compat, ncompat, 0, &pchild) != MDI_SUCCESS) { SCSI_HBA_LOG((_LOG(2), self, probe, "pathinfo alloc failed")); goto out; } ASSERT(pchild); dchild = mdi_pi_get_client(pchild); ASSERT(dchild); ndi_flavor_set(dchild, SCSA_FLAVOR_SCSI_DEVICE); /* * Decorate new node with addressing properties via * scsi_hba_ua_set(). */ if (scsi_hba_ua_set(addr, NULL, pchild) == 0) { SCSI_HBA_LOG((_LOG(1), self, NULL, "pathinfo %s decoration failed", mdi_pi_spathname(pchild))); (void) mdi_pi_free(pchild, 0); pchild = NULL; goto out; } /* Bind the driver */ if (ndi_devi_bind_driver(dchild, 0) != NDI_SUCCESS) { /* need to bind in order to register a devid */ SCSI_HBA_LOG((_LOGCFG, self, NULL, "pathinfo %s created, no client driver-> " "no devid_register", mdi_pi_spathname(pchild))); goto out; } /* Watch out for inconsistancies in devids. */ if (ddi_devid_get(dchild, &cdevid) == DDI_SUCCESS) have_cdevid = 1; if (have_devid && !have_cdevid) { /* Client does not yet have devid, register ours. */ if (ddi_devid_register(dchild, devid) == DDI_FAILURE) SCSI_HBA_LOG((_LOG(1), self, NULL, "pathinfo %s created, " "devid register failed", mdi_pi_spathname(pchild))); else SCSI_HBA_LOG((_LOG(2), self, NULL, "pathinfo %s created with devid", mdi_pi_spathname(pchild))); } else if (have_devid && have_cdevid) { /* * We have devid and client already has devid: * they must be the same. */ if (ddi_devid_compare(cdevid, devid) != 0) { SCSI_HBA_LOG((_LOG(WARN), NULL, dchild, "mismatched devid on path %s", mdi_pi_spathname(pchild))); } } else if (!have_devid && have_cdevid) { /* * Client already has a devid, but we don't: * we should not have missing devids. */ SCSI_HBA_LOG((_LOG(WARN), NULL, dchild, "missing devid on path %s", mdi_pi_spathname(pchild))); } else if (!have_cdevid && !have_devid) { /* devid not supported */ SCSI_HBA_LOG((_LOG(2), self, NULL, "pathinfo %s created, no devid", mdi_pi_spathname(pchild))); } /* * The above has registered devid for the device under * the client node. Now register it under the full pHCI * path to the device. We'll get an entry equivalent to * booting with mpxio disabled. This is needed for * telemetry during enumeration. */ if (e_devid_cache_pathinfo(pchild, devid) == DDI_SUCCESS) { SCSI_HBA_LOG((_LOG(2), NULL, dchild, "pathinfo @%s created with devid", addr)); } else { SCSI_HBA_LOG((_LOG(1), NULL, dchild, "pathinfo @%s devid cache failed", addr)); } } /* free the node name and compatible information */ out: if (have_devid) ddi_devid_free(devid); if (have_cdevid) ddi_devid_free(cdevid); if (guid) ddi_devid_free_guid(guid); if (compat) scsi_hba_ident_nodename_compatible_free(nname, dname, compat); if (inq80) ddi_prop_free(inq80); if (inq83) ddi_prop_free(inq83); if (binding_set) ddi_prop_free(binding_set); /* return child_type results */ if (pchild) { *dchildp = NULL; *pchildp = pchild; return (CHILD_TYPE_PATHINFO); } else if (dchild) { *dchildp = dchild; *pchildp = NULL; return (CHILD_TYPE_DEVINFO); } return (CHILD_TYPE_NONE); } /* * Call scsi_device_createchild and then initchild the new node. */ static dev_info_t * scsi_device_configchild(dev_info_t *self, char *addr, scsi_enum_t se, struct scsi_device *sdprobe, int *circp, int *ppi) { int child_type; dev_info_t *dchild; mdi_pathinfo_t *pchild; dev_info_t *child; int rval; ASSERT(self && addr && *addr && DEVI_BUSY_OWNED(self)); if (ppi) *ppi = 0; child_type = scsi_device_createchild(self, addr, se, sdprobe, &dchild, &pchild); /* * Prevent multiple initialized (tran_tgt_init) nodes associated with * the same @addr at the same time by calling tran_tgt_free() on the * probe node prior to promotion of the 'real' node. After the call * to scsi_hba_barrier_tran_tgt_free(), the HBA no longer has any * probe node context. */ scsi_hba_barrier_tran_tgt_free(sdprobe->sd_dev); switch (child_type) { case CHILD_TYPE_NONE: child = NULL; break; case CHILD_TYPE_PATHINFO: /* * Online pathinfo: Hold the path and exit the pHCI while * calling mdi_pi_online() to avoid deadlock with power * management of pHCI. */ ASSERT(MDI_PHCI(self)); mdi_hold_path(pchild); scsi_hba_devi_exit_phci(self, *circp); rval = mdi_pi_online(pchild, 0); scsi_hba_devi_enter_phci(self, circp); mdi_rele_path(pchild); if (rval != MDI_SUCCESS) { /* pathinfo form of "failed during tran_tgt_init" */ scsi_enumeration_failed(NULL, se, mdi_pi_spathname(pchild), "path online"); (void) mdi_pi_free(pchild, 0); return (NULL); } /* * Return the path_instance of the pathinfo node. * * NOTE: We assume that sd_inq is not path-specific. */ if (ppi) *ppi = mdi_pi_get_path_instance(pchild); /* * Fallthrough into CHILD_TYPE_DEVINFO code to promote * the 'client' devinfo node as a dchild. */ dchild = mdi_pi_get_client(pchild); SCSI_HBA_LOG((_LOG(4), NULL, dchild, "pathinfo online successful")); /* FALLTHROUGH */ case CHILD_TYPE_DEVINFO: /* * For now, we ndi_devi_online() the child because some other * parts of the IO framework, like degenerate devid code, * depend on bus_config driving nodes to DS_ATTACHED. At some * point in the future, to keep things light-weight, we would * like to change the ndi_devi_online call below to be * * if (ddi_initchild(self, dchild) != DDI_SUCCESS) * * This would promote the node so that framework code could * find the child with an @addr search, but does not incur * attach(9E) overhead for BUS_CONFIG_ALL cases where the * framework is not interested in attach of the node. * * NOTE: If the addr specified has incorrect syntax (busconfig * one of bogus /devices path) then call below can fail. */ if (ndi_devi_online(dchild, 0) != NDI_SUCCESS) { SCSI_HBA_LOG((_LOG(2), NULL, dchild, "devinfo online failed")); /* failed online does not remove the node */ (void) scsi_hba_remove_node(dchild); return (NULL); } SCSI_HBA_LOG((_LOG(4), NULL, dchild, "devinfo initchild successful")); child = dchild; break; } return (child); } void scsi_hba_pkt_comp(struct scsi_pkt *pkt) { scsi_hba_tran_t *tran; uint8_t *sensep; ASSERT(pkt); /* * Catch second call on the same packet before doing anything else. */ if (pkt->pkt_flags & FLAG_PKT_COMP_CALLED) { cmn_err( #ifdef DEBUG CE_PANIC, #else CE_WARN, #endif "%s duplicate scsi_hba_pkt_comp(9F) on same scsi_pkt(9S)", mod_containing_pc(caller())); } pkt->pkt_flags |= FLAG_PKT_COMP_CALLED; if (pkt->pkt_comp == NULL) return; /* * For HBA drivers that implement tran_setup_pkt(9E), if we are * completing a 'consistent' mode DMA operation then we must * perform dma_sync prior to calling pkt_comp to ensure that * the target driver sees the correct data in memory. */ ASSERT((pkt->pkt_flags & FLAG_NOINTR) == 0); if (((pkt->pkt_dma_flags & DDI_DMA_CONSISTENT) && (pkt->pkt_dma_flags & DDI_DMA_READ)) && ((P_TO_TRAN(pkt)->tran_setup_pkt) != NULL)) { scsi_sync_pkt(pkt); } /* * If the HBA driver is using SCSAv3 scsi_hba_tgtmap_create enumeration * then we detect the special ASC/ASCQ completion codes that indicate * that the lun configuration of a target has changed. Since we need to * be determine scsi_device given scsi_address enbedded in * scsi_pkt (via scsi_address_device(9F)), we also require use of * SCSI_HBA_ADDR_COMPLEX. */ tran = pkt->pkt_address.a_hba_tran; ASSERT(tran); if ((tran->tran_tgtmap == NULL) || !(tran->tran_hba_flags & SCSI_HBA_ADDR_COMPLEX)) goto comp; /* not using tgtmap */ /* * Check for lun-change notification and queue the scsi_pkt for * lunchg1 processing. The 'pkt_comp' call to the target driver * is part of lunchg1 processing. */ if ((pkt->pkt_reason == CMD_CMPLT) && (((*pkt->pkt_scbp) & STATUS_MASK) == STATUS_CHECK) && (pkt->pkt_state & STATE_ARQ_DONE)) { sensep = (uint8_t *)&(((struct scsi_arq_status *)(uintptr_t) (pkt->pkt_scbp))->sts_sensedata); if (((scsi_sense_key(sensep) == KEY_UNIT_ATTENTION) && (scsi_sense_asc(sensep) == 0x3f) && (scsi_sense_ascq(sensep) == 0x0e)) || ((scsi_sense_key(sensep) == KEY_UNIT_ATTENTION) && (scsi_sense_asc(sensep) == 0x25) && (scsi_sense_ascq(sensep) == 0x00))) { /* * The host adaptor is done with the packet, we use * pkt_stmp stage-temporary to link the packet for * lunchg1 processing. * * NOTE: pkt_ha_private is not available since its use * extends to tran_teardown_pkt. */ mutex_enter(&scsi_lunchg1_mutex); pkt->pkt_stmp = scsi_lunchg1_list; scsi_lunchg1_list = pkt; if (pkt->pkt_stmp == NULL) (void) cv_signal(&scsi_lunchg1_cv); mutex_exit(&scsi_lunchg1_mutex); return; } } comp: (*pkt->pkt_comp)(pkt); } /* * return 1 if the specified node is a barrier/probe node */ static int scsi_hba_devi_is_barrier(dev_info_t *probe) { if (probe && (strcmp(ddi_node_name(probe), "probe") == 0)) return (1); return (0); } /* * A host adapter driver is easier to write if we prevent multiple initialized * (tran_tgt_init) scsi_device structures to the same unit-address at the same * time. We prevent this from occurring all the time during the barrier/probe * node to real child hand-off by calling scsi_hba_barrier_tran_tgt_free * on the probe node prior to ddi_inichild of the 'real' node. As part of * this early tran_tgt_free implementation, we must also call this function * as we put a probe node on the scsi_hba_barrier_list. */ static void scsi_hba_barrier_tran_tgt_free(dev_info_t *probe) { struct scsi_device *sdprobe; dev_info_t *self; scsi_hba_tran_t *tran; ASSERT(probe && scsi_hba_devi_is_barrier(probe)); /* Return if we never called tran_tgt_init(9E). */ if (i_ddi_node_state(probe) < DS_INITIALIZED) return; sdprobe = ddi_get_driver_private(probe); self = ddi_get_parent(probe); ASSERT(sdprobe && self); tran = ddi_get_driver_private(self); ASSERT(tran); if (tran->tran_tgt_free) { /* * To correctly support TRAN_CLONE, we need to use the same * cloned scsi_hba_tran(9S) structure for both tran_tgt_init(9E) * and tran_tgt_free(9E). */ if (tran->tran_hba_flags & SCSI_HBA_TRAN_CLONE) tran = sdprobe->sd_address.a_hba_tran; if (!sdprobe->sd_tran_tgt_free_done) { SCSI_HBA_LOG((_LOG(4), NULL, probe, "tran_tgt_free EARLY")); (*tran->tran_tgt_free) (self, probe, tran, sdprobe); sdprobe->sd_tran_tgt_free_done = 1; } else { SCSI_HBA_LOG((_LOG(4), NULL, probe, "tran_tgt_free EARLY already done")); } } } /* * Add an entry to the list of barrier nodes to be asynchronously deleted by * the scsi_hba_barrier_daemon after the specified timeout. Nodes on * the barrier list are used to implement the bus_config probe cache * of non-existent devices. The nodes are at DS_INITIALIZED, so their * @addr is established for searching. Since devi_ref of a DS_INITIALIZED * node will *not* prevent demotion, demotion is prevented by setting * sd_uninit_prevent. Devinfo snapshots attempt to attach probe cache * nodes, and on failure attempt to demote the node (without the participation * of bus_unconfig) to DS_BOUND - this demotion is prevented via * sd_uninit_prevent causing any attempted DDI_CTLOPS_UNINITCHILD to fail. * Probe nodes are bound to nulldriver. The list is sorted by * expiration time. * * NOTE: If we drove a probe node to DS_ATTACHED, we could use ndi_hold_devi() * to prevent demotion (instead of sd_uninit_prevent). */ static void scsi_hba_barrier_add(dev_info_t *probe, int seconds) { struct scsi_hba_barrier *nb; struct scsi_hba_barrier *b; struct scsi_hba_barrier **bp; clock_t endtime; ASSERT(scsi_hba_devi_is_barrier(probe)); /* HBA is no longer responsible for nodes on the barrier list. */ scsi_hba_barrier_tran_tgt_free(probe); nb = kmem_alloc(sizeof (struct scsi_hba_barrier), KM_SLEEP); mutex_enter(&scsi_hba_barrier_mutex); endtime = ddi_get_lbolt() + drv_usectohz(seconds * MICROSEC); for (bp = &scsi_hba_barrier_list; (b = *bp) != NULL; bp = &b->barrier_next) if (b->barrier_endtime > endtime) break; nb->barrier_next = *bp; nb->barrier_endtime = endtime; nb->barrier_probe = probe; *bp = nb; if (bp == &scsi_hba_barrier_list) (void) cv_signal(&scsi_hba_barrier_cv); mutex_exit(&scsi_hba_barrier_mutex); } /* * Attempt to remove devinfo node node, return 1 if removed. We * don't try to remove barrier nodes that have sd_uninit_prevent set * (even though they should fail device_uninitchild). */ static int scsi_hba_remove_node(dev_info_t *child) { dev_info_t *self = ddi_get_parent(child); struct scsi_device *sd; int circ; int remove = 1; int ret = 0; char na[SCSI_MAXNAMELEN]; scsi_hba_devi_enter(self, &circ); /* Honor sd_uninit_prevent on barrier nodes */ if (scsi_hba_devi_is_barrier(child)) { sd = ddi_get_driver_private(child); if (sd && sd->sd_uninit_prevent) remove = 0; } if (remove) { (void) ddi_deviname(child, na); if (ddi_remove_child(child, 0) != DDI_SUCCESS) { SCSI_HBA_LOG((_LOG(2), NULL, child, "remove_node failed")); } else { child = NULL; /* child is gone */ SCSI_HBA_LOG((_LOG(4), self, NULL, "remove_node removed %s", *na ? &na[1] : na)); ret = 1; } } else { SCSI_HBA_LOG((_LOG(4), NULL, child, "remove_node prevented")); } scsi_hba_devi_exit(self, circ); return (ret); } /* * The asynchronous barrier deletion daemon. Waits for a barrier timeout * to expire, then deletes the barrier (removes it as a child). */ /*ARGSUSED*/ static void scsi_hba_barrier_daemon(void *arg) { struct scsi_hba_barrier *b; dev_info_t *probe; callb_cpr_t cprinfo; int circ; dev_info_t *self; CALLB_CPR_INIT(&cprinfo, &scsi_hba_barrier_mutex, callb_generic_cpr, "scsi_hba_barrier_daemon"); again: mutex_enter(&scsi_hba_barrier_mutex); for (;;) { b = scsi_hba_barrier_list; if (b == NULL) { /* all barriers expired, wait for barrier_add */ CALLB_CPR_SAFE_BEGIN(&cprinfo); (void) cv_wait(&scsi_hba_barrier_cv, &scsi_hba_barrier_mutex); CALLB_CPR_SAFE_END(&cprinfo, &scsi_hba_barrier_mutex); } else { if (ddi_get_lbolt() >= b->barrier_endtime) { /* * Drop and retry if ordering issue. Do this * before calling scsi_hba_remove_node() and * deadlocking. */ probe = b->barrier_probe; self = ddi_get_parent(probe); if (scsi_hba_devi_tryenter(self, &circ) == 0) { delay: mutex_exit(&scsi_hba_barrier_mutex); delay_random(5); goto again; } /* process expired barrier */ if (!scsi_hba_remove_node(probe)) { /* remove failed, delay and retry */ SCSI_HBA_LOG((_LOG(4), NULL, probe, "delay expire")); scsi_hba_devi_exit(self, circ); goto delay; } scsi_hba_barrier_list = b->barrier_next; kmem_free(b, sizeof (struct scsi_hba_barrier)); scsi_hba_devi_exit(self, circ); } else { /* establish timeout for next barrier expire */ (void) cv_timedwait(&scsi_hba_barrier_cv, &scsi_hba_barrier_mutex, b->barrier_endtime); } } } } /* * Remove all barriers associated with the specified HBA. This is called * from from the bus_unconfig implementation to remove probe nodes associated * with the specified HBA (self) so that probe nodes that have not expired * will not prevent DR of the HBA. */ static void scsi_hba_barrier_purge(dev_info_t *self) { struct scsi_hba_barrier **bp; struct scsi_hba_barrier *b; mutex_enter(&scsi_hba_barrier_mutex); for (bp = &scsi_hba_barrier_list; (b = *bp) != NULL; ) { if (ddi_get_parent(b->barrier_probe) == self) { if (scsi_hba_remove_node(b->barrier_probe)) { *bp = b->barrier_next; kmem_free(b, sizeof (struct scsi_hba_barrier)); } else { SCSI_HBA_LOG((_LOG(4), NULL, b->barrier_probe, "skip purge")); } } else bp = &b->barrier_next; } mutex_exit(&scsi_hba_barrier_mutex); } /* * LUN-change processing daemons: processing occurs in two stages: * * Stage 1: Daemon waits for a lunchg1 queued scsi_pkt, dequeues the pkt, * forms the path, completes the scsi_pkt (pkt_comp), and * queues the path for stage 2 processing. The use of stage 1 * avoids issues related to memory allocation in interrupt context * (scsi_hba_pkt_comp()). We delay the pkt_comp completion until * after lunchg1 processing forms the path for stage 2 - this is * done to prevent the target driver from detaching until the * path formation is complete (driver with outstanding commands * should not detach). * * Stage 2: Daemon waits for a lunchg2 queued request, dequeues the * request, and opens the path using ldi_open_by_name(). The * path opened uses a special "@taddr,*" unit address that will * trigger lun enumeration in scsi_hba_bus_configone(). We * trigger lun enumeration in stage 2 to avoid problems when * initial ASC/ASCQ trigger occurs during discovery. */ /*ARGSUSED*/ static void scsi_lunchg1_daemon(void *arg) { callb_cpr_t cprinfo; struct scsi_pkt *pkt; scsi_hba_tran_t *tran; dev_info_t *self; struct scsi_device *sd; char *ua, *p; char taddr[SCSI_MAXNAMELEN]; char path[MAXPATHLEN]; struct scsi_lunchg2 *lunchg2; CALLB_CPR_INIT(&cprinfo, &scsi_lunchg1_mutex, callb_generic_cpr, "scsi_lunchg1_daemon"); mutex_enter(&scsi_lunchg1_mutex); for (;;) { pkt = scsi_lunchg1_list; if (pkt == NULL) { /* All lunchg1 processing requests serviced, wait. */ CALLB_CPR_SAFE_BEGIN(&cprinfo); (void) cv_wait(&scsi_lunchg1_cv, &scsi_lunchg1_mutex); CALLB_CPR_SAFE_END(&cprinfo, &scsi_lunchg1_mutex); continue; } /* Unlink and perform lunchg1 processing on pkt. */ scsi_lunchg1_list = pkt->pkt_stmp; /* Determine initiator port (self) from the pkt_address. */ tran = pkt->pkt_address.a_hba_tran; ASSERT(tran && tran->tran_tgtmap && tran->tran_iport_dip); self = tran->tran_iport_dip; /* * Determine scsi_devie from pkt_address (depends on * SCSI_HBA_ADDR_COMPLEX). */ sd = scsi_address_device(&(pkt->pkt_address)); ASSERT(sd); if (sd == NULL) { (*pkt->pkt_comp)(pkt); continue; } /* Determine unit-address from scsi_device. */ ua = scsi_device_unit_address(sd); /* Extract taddr from the unit-address. */ for (p = taddr; (*ua != ',') && (*ua != '\0'); ) *p++ = *ua++; *p = '\0'; /* NULL terminate taddr */ /* * Form path using special "@taddr,*" notation to trigger * lun enumeration. */ (void) ddi_pathname(self, path); (void) strcat(path, "/luns@"); (void) strcat(path, taddr); (void) strcat(path, ",*"); /* * Now that we have the path, complete the pkt that * triggered lunchg1 processing. */ (*pkt->pkt_comp)(pkt); /* Allocate element for stage2 processing queue. */ lunchg2 = kmem_alloc(sizeof (*lunchg2), KM_SLEEP); lunchg2->lunchg2_path = strdup(path); /* Queue and dispatch to stage 2. */ SCSI_HBA_LOG((_LOG(2), self, NULL, "lunchg stage1: queue %s", lunchg2->lunchg2_path)); mutex_enter(&scsi_lunchg2_mutex); lunchg2->lunchg2_next = scsi_lunchg2_list; scsi_lunchg2_list = lunchg2; if (lunchg2->lunchg2_next == NULL) (void) cv_signal(&scsi_lunchg2_cv); mutex_exit(&scsi_lunchg2_mutex); } } /*ARGSUSED*/ static void scsi_lunchg2_daemon(void *arg) { callb_cpr_t cprinfo; struct scsi_lunchg2 *lunchg2; ldi_ident_t li; ldi_handle_t lh; CALLB_CPR_INIT(&cprinfo, &scsi_lunchg2_mutex, callb_generic_cpr, "scsi_lunchg2_daemon"); li = ldi_ident_from_anon(); mutex_enter(&scsi_lunchg2_mutex); for (;;) { lunchg2 = scsi_lunchg2_list; if (lunchg2 == NULL) { /* All lunchg2 processing requests serviced, wait. */ CALLB_CPR_SAFE_BEGIN(&cprinfo); (void) cv_wait(&scsi_lunchg2_cv, &scsi_lunchg2_mutex); CALLB_CPR_SAFE_END(&cprinfo, &scsi_lunchg2_mutex); continue; } /* Unlink and perform lunchg2 processing on pkt. */ scsi_lunchg2_list = lunchg2->lunchg2_next; /* * Open and close the path to trigger lun enumeration. We * don't expect the open to succeed, but we do expect code in * scsi_hba_bus_configone() to trigger lun enumeration. */ SCSI_HBA_LOG((_LOG(2), NULL, NULL, "lunchg stage2: open %s", lunchg2->lunchg2_path)); if (ldi_open_by_name(lunchg2->lunchg2_path, FREAD, kcred, &lh, li) == 0) (void) ldi_close(lh, FREAD, kcred); /* Free path and linked element. */ strfree(lunchg2->lunchg2_path); kmem_free(lunchg2, sizeof (*lunchg2)); } } /* * Enumerate a child at the specified @addr. If a device exists @addr then * ensure that we have the appropriately named devinfo node for it. Name is * NULL in the bus_config_all case. This routine has no knowledge of the * format of an @addr string or associated addressing properties. * * The caller must guarantee that there is an open scsi_hba_devi_enter on the * parent. We return the scsi_device structure for the child device. This * scsi_device structure is valid until the caller scsi_hba_devi_exit the * parent. The caller can add do ndi_hold_devi of the child prior to the * scsi_hba_devi_exit to extend the validity of the child. * * In some cases the returned scsi_device structure may be used to drive * additional SCMD_REPORT_LUNS operations by bus_config_all callers. * * The first operation performed is to see if there is a dynamic SID nodes * already attached at the specified "name@addr". This is the fastpath * case for resolving a reference to a node that has already been created. * All other references are serialized for a given @addr prior to probing * to determine the type of device, if any, at the specified @addr. * If no device is present then NDI_FAILURE is returned. The fact that a * device does not exist may be determined via the barrier/probe cache, * minimizing the probes of non-existent devices. * * When there is a device present the dynamic SID node is created based on * the device found. If a driver.conf node exists for the same @addr it * will either merge into the dynamic SID node (if the SID node bound to * that driver), or exist independently. To prevent the actions of one driver * causing side effects in another, code prevents multiple SID nodes from * binding to the same "@addr" at the same time. There is autodetach code * to allow one device to be replaced with another at the same @addr for * slot addressed SCSI bus implementations (SPI). For compatibility with * legacy driver.conf behavior, the code does not prevent multiple driver.conf * nodes from attaching to the same @addr at the same time. * * This routine may have the side effect of creating nodes for devices other * than the one being sought. It is possible that there is a different type of * target device at that target/lun address than we were asking for. In that * It is the caller's responsibility to determine whether the device we found, * if any, at the specified address, is the one it really wanted. */ static struct scsi_device * scsi_device_config(dev_info_t *self, char *name, char *addr, scsi_enum_t se, int *circp, int *ppi) { dev_info_t *child = NULL; dev_info_t *probe = NULL; struct scsi_device *sdchild; struct scsi_device *sdprobe; dev_info_t *dsearch; mdi_pathinfo_t *psearch; major_t major; int sp; int pi = 0; int wait_msg = scsi_hba_wait_msg; int chg; ASSERT(self && addr && DEVI_BUSY_OWNED(self)); SCSI_HBA_LOG((_LOG(4), self, NULL, "%s@%s wanted", name ? name : "", addr)); /* playing with "probe" node name is dangerous */ if (name && (strcmp(name, "probe") == 0)) return (NULL); /* * NOTE: use 'goto done;' or 'goto fail;'. There should only be one * 'return' statement from here to the end of the function - the one * on the last line of the function. */ /* * Fastpath: search to see if we are requesting a named SID node that * already exists (we already created) - probe node does not count. * scsi_findchild() does not hold the returned devinfo node, but * this is OK since the caller has a scsi_hba_devi_enter on the * attached parent HBA (self). The caller is responsible for attaching * and placing a hold on the child (directly via ndi_hold_devi or * indirectly via ndi_busop_bus_config) before doing an * scsi_hba_devi_exit on the parent. * * NOTE: This fastpath prevents detecting a driver binding change * (autodetach) if the same nodename is used for old and new binding. */ /* first call is with init set */ (void) scsi_findchild(self, name, addr, 1, &dsearch, NULL, &pi); if (dsearch && scsi_hba_dev_is_sid(dsearch) && !scsi_hba_devi_is_barrier(dsearch)) { SCSI_HBA_LOG((_LOG(4), NULL, dsearch, "%s@%s devinfo fastpath", name ? name : "", addr)); child = dsearch; goto done; } /* * Create a barrier devinfo node used to "probe" the device with. We * need to drive this node to DS_INITIALIZED so that the * DDI_CTLOPS_INITCHILD has occurred, bringing the SCSA transport to * a state useable state for issuing our "probe" commands. We establish * this barrier node with a node name of "probe" and compatible * property of "scsiprobe". The compatible property must be associated * in /etc/driver_aliases with a scsi target driver available in the * root file system (sd). * * The "probe" that we perform on the barrier node, after it is * DS_INITIALIZED, is used to find the information needed to create a * dynamic devinfo (SID) node. This "probe" is separate from the * probe(9E) call associated with the transition of a node from * DS_INITIALIZED to DS_PROBED. The probe(9E) call that eventually * occurs against the created SID node should find ddi_dev_is_sid and * just return DDI_PROBE_DONTCARE. * * Trying to avoid the use of a barrier node is not a good idea * because we may have an HBA driver that uses generic bus_config * (this code) but implements its own DDI_CTLOPS_INITCHILD with side * effects that we can't duplicate (such as the ATA nexus driver). * * The probe/barrier node plays an integral part of the locking scheme. * The objective is to single thread probes of the same device (same * @addr) while allowing parallelism for probes of different devices * with the same parent. At this point we are serialized on our self. * For parallelism we will need to release our self. Prior to release * we construct a barrier for probes of the same device to serialize * against. The "probe@addr" node acts as this barrier. An entering * thread must wait until the probe node does not exist - it can then * create and link the probe node - dropping the HBA (self) lock after * the node is linked and visible (after ddi_initchild). A side effect * of this is that transports should not "go over the wire" (i.e. do * things that incur significant delays) until after tran_target_init. * This means that the first "over the wire" operation should occur * at tran_target_probe time - when things are running in parallel * again. * * If the probe node exists then another probe with the same @addr is * in progress, we must wait until there is no probe in progress * before proceeding, and when we proceed we must continue to hold the * HBA (self) until we have linked a new probe node as a barrier. * * When a device is found to *not* exist, its probe/barrier node may be * marked with DEVICE_REMOVED with node deletion scheduled for some * future time (seconds). This asynchronous deletion allows the * framework to detect repeated requests to the same non-existent * device and avoid overhead associated with contacting a non-existent * device again and again. */ for (;;) { /* * Search for probe node - they should only exist as devinfo * nodes. */ (void) scsi_findchild(self, "probe", addr, 0, &probe, &psearch, NULL); if (probe == NULL) { if (psearch) SCSI_HBA_LOG((_LOG(2), self, mdi_pi_get_client(psearch), "???? @%s 'probe' search found " "pathinfo: %p", addr, (void *)psearch)); break; } /* * The barrier node may cache the non-existence of a device * by leaving the barrier node in place (with * DEVI_DEVICE_REMOVED flag set ) for some amount of time after * the failure of a probe. This flag is used to fail * additional probes until the barrier probe node is deleted, * which will occur from a timeout some time after a failed * probe. The failed probe will use DEVI_SET_DEVICE_REMOVED * and schedule probe node deletion from a timeout. The callers * scsi_hba_devi_exit on the way out of the first failure will * do the cv_broadcast associated with the cv_wait below - this * handles threads that wait prior to DEVI_DEVICE_REMOVED being * set. */ if (DEVI_IS_DEVICE_REMOVED(probe)) { SCSI_HBA_LOG((_LOG(3), NULL, probe, "detected probe DEVICE_REMOVED")); probe = NULL; /* deletion already scheduled */ goto fail; } /* * Drop the lock on the HBA (self) and wait until the probe in * progress has completed. A changes in the sibling list from * removing the probe node will cause cv_wait to return * (scsi_hba_devi_exit does the cv_broadcast). */ if (wait_msg) { wait_msg--; SCSI_HBA_LOG((_LOG(2), NULL, probe, "exists, probe already in progress: %s", wait_msg ? "waiting..." : "last msg, but still waiting...")); } /* * NOTE: we could avoid rare case of one second delay by * implementing scsi_hba_devi_exit_and_wait based on * ndi/mdi_devi_exit_and_wait (and consider switching devcfg.c * code to use these ndi/mdi interfaces too). */ scsi_hba_devi_exit(self, *circp); mutex_enter(&DEVI(self)->devi_lock); (void) cv_timedwait(&DEVI(self)->devi_cv, &DEVI(self)->devi_lock, ddi_get_lbolt() + drv_usectohz(MICROSEC)); mutex_exit(&DEVI(self)->devi_lock); scsi_hba_devi_enter(self, circp); } ASSERT(probe == NULL); /* * Search to see if we are requesting a SID node that already exists. * We hold the HBA (self) and there is not another probe in progress at * the same @addr. scsi_findchild() does not hold the returned * devinfo node but this is OK since we hold the HBA (self). */ if (name) { (void) scsi_findchild(self, name, addr, 1, &dsearch, NULL, &pi); if (dsearch && scsi_hba_dev_is_sid(dsearch)) { SCSI_HBA_LOG((_LOG(4), NULL, dsearch, "%s@%s probe devinfo fastpath", name ? name : "", addr)); child = dsearch; goto done; } } /* * We are looking for a SID node that does not exist or a driver.conf * node. * * To avoid probe side effects, before we probe the device at the * specified address we need to check to see if there is already an * initialized child "@addr". * * o If we find an initialized SID child and name is NULL or matches * the name or the name of the attached driver then we return the * existing node. * * o If we find a non-matching SID node, we will attempt to autodetach * and remove the node in preference to our new node. * * o If SID node found does not match and can't be autodetached, we * fail: we only allow one SID node at an address. * * NOTE: This code depends on SID nodes showing up prior to * driver.conf nodes in the sibling list. */ for (;;) { /* first NULL name call is with init set */ (void) scsi_findchild(self, NULL, addr, 1, &dsearch, NULL, &pi); if (dsearch == NULL) break; ASSERT(!scsi_hba_devi_is_barrier(dsearch)); /* * To detect changes in driver binding that should attempt * autodetach we determine the major number of the driver * that should currently be associated with the device based * on the compatible property. */ major = DDI_MAJOR_T_NONE; if (scsi_hba_dev_is_sid(dsearch)) major = ddi_compatible_driver_major(dsearch, NULL); if ((major == DDI_MAJOR_T_NONE) && (name == NULL)) major = ddi_driver_major(dsearch); if ((scsi_hba_dev_is_sid(dsearch) || (i_ddi_node_state(dsearch) >= DS_INITIALIZED)) && ((name == NULL) || (strcmp(ddi_node_name(dsearch), name) == 0) || (strcmp(ddi_driver_name(dsearch), name) == 0)) && (major == ddi_driver_major(dsearch))) { SCSI_HBA_LOG((_LOG(3), NULL, dsearch, "already attached @addr")); child = dsearch; goto done; } if (!scsi_hba_dev_is_sid(dsearch)) break; /* driver.conf node */ /* * Implement autodetach of SID node for situations like a * previously "scsinodev" LUN0 coming into existence (or a * disk/tape on an SPI transport at same addr but never both * powered on at the same time). Try to autodetach the existing * SID node @addr. If that works, search again - otherwise fail. */ SCSI_HBA_LOG((_LOG(2), NULL, dsearch, "looking for %s@%s: SID @addr exists, autodetach", name ? name : "", addr)); if (!scsi_hba_remove_node(dsearch)) { SCSI_HBA_LOG((_LOG(2), NULL, dsearch, "autodetach @%s failed: fail %s@%s", addr, name ? name : "", addr)); goto fail; } SCSI_HBA_LOG((_LOG(2), self, NULL, "autodetach @%s OK", addr)); } /* * We will be creating a new SID node, allocate probe node * used to find out information about the device located @addr. * The probe node also acts as a barrier against additional * configuration at the same address, and in the case of non-existent * devices it will (for some amount of time) avoid re-learning that * the device does not exist on every reference. Once the probe * node is DS_LINKED we can drop the HBA (self). * * The probe node is allocated as a hidden node so that it does not * show up in devinfo snapshots. */ ndi_devi_alloc_sleep(self, "probe", (se == SE_HP) ? DEVI_SID_HP_HIDDEN_NODEID : DEVI_SID_HIDDEN_NODEID, &probe); ASSERT(probe); ndi_flavor_set(probe, SCSA_FLAVOR_SCSI_DEVICE); /* * Decorate the probe node with the property representation of @addr * unit-address string prior to initchild so that initchild can * construct the name of the node from properties and tran_tgt_init * implementation can determine what LUN is being referenced. * * If the addr specified has incorrect syntax (busconfig one of bogus * /devices path) then scsi_hba_ua_set can fail. If the address * is not understood by the SCSA HBA driver then this operation will * work, but tran_tgt_init may still fail (for example the HBA * driver may not support secondary functions). */ if (scsi_hba_ua_set(addr, probe, NULL) == 0) { SCSI_HBA_LOG((_LOG(2), NULL, probe, "@%s failed scsi_hba_ua_set", addr)); goto fail; } /* * Set the class property to "scsi". This is sufficient to distinguish * the node for HBAs that have multiple classes of children (like uata * - which has "dada" class for ATA children and "scsi" class for * ATAPI children) and may not use our scsi_busctl_initchild() * implementation. We also add a "compatible" property of "scsiprobe" * to select the probe driver. */ if ((ndi_prop_update_string(DDI_DEV_T_NONE, probe, "class", "scsi") != DDI_PROP_SUCCESS) || (ndi_prop_update_string_array(DDI_DEV_T_NONE, probe, "compatible", &compatible_probe, 1) != DDI_PROP_SUCCESS)) { SCSI_HBA_LOG((_LOG(1), NULL, probe, "@%s failed node decoration", addr)); goto fail; } /* * Promote probe node to DS_INITIALIZED so that transport can be used * for scsi_probe. After this the node is linked and visible as a * barrier for serialization of other @addr operations. * * NOTE: If we attached the probe node, we could get rid of * uninit_prevent. */ if (ddi_initchild(self, probe) != DDI_SUCCESS) { SCSI_HBA_LOG((_LOG(2), NULL, probe, "@%s failed initchild", addr)); /* probe node will be removed in fail exit path */ goto fail; } /* get the scsi_device structure of the probe node */ sdprobe = ddi_get_driver_private(probe); ASSERT(sdprobe); /* * Do scsi_probe. The probe node is linked and visible as a barrier. * We prevent uninitialization of the probe node and drop our HBA (self) * while we run scsi_probe() of this "@addr". This allows the framework * to support multiple scsi_probes for different devices attached to * the same HBA (self) in parallel. We prevent node demotion of the * probe node from DS_INITIALIZED by setting sd_uninit_prevent. The * probe node can not be successfully demoted below DS_INITIALIZED * (scsi_busctl_uninitchild will fail) until we zero sd_uninit_prevent * as we are freeing the node via scsi_hba_remove_node(probe). */ sdprobe->sd_uninit_prevent++; scsi_hba_devi_exit(self, *circp); sp = scsi_probe(sdprobe, SLEEP_FUNC); /* Introduce a small delay here to increase parallelism. */ delay_random(5); if (sp == SCSIPROBE_EXISTS) { /* * For a device that exists, while still running in parallel, * also get identity information from device. This is done * separate from scsi_probe/tran_tgt_probe/scsi_hba_probe * since the probe code path may still be used for HBAs * that don't use common bus_config services (we don't want * to expose that code path to a behavior change). This * operation is called 'identity' to avoid confusion with * deprecated identify(9E). * * Future: We may eventually want to allow HBA customization via * scsi_identity/tran_tgt_identity/scsi_device_identity, but for * now we just scsi_device_identity. * * The identity operation will establish additional properties * on the probe node related to device identity: * * "inquiry-page-80" byte array of SCSI page 80 * "inquiry-page-83" byte array of SCSI page 83 * * These properties will be used to generate a devid * (ddi_devid_scsi_encode) and guid - and to register * (ddi_devid_register) a devid for the device. * * If identify fails (non-zero return), the we had allocation * problems or the device returned inconsistent results then * we pretend that device does not exist. */ if (scsi_device_identity(sdprobe, SLEEP_FUNC)) { scsi_enumeration_failed(probe, -1, NULL, "identify"); sp = SCSIPROBE_FAILURE; } /* * Future: Is there anything more we can do here to help avoid * serialization on iport parent during scsi_device attach(9E)? */ } scsi_hba_devi_enter(self, circp); sdprobe->sd_uninit_prevent--; if (sp != SCSIPROBE_EXISTS) { scsi_enumeration_failed(probe, -1, NULL, "probe"); if ((se != SE_HP) && scsi_hba_barrier_timeout) { /* * Target does not exist. Mark the barrier probe node * as DEVICE_REMOVED and schedule an asynchronous * deletion of the node in scsi_hba_barrier_timeout * seconds. We keep our hold on the probe node * until we are ready perform the asynchronous node * deletion. */ SCSI_HBA_LOG((_LOG(3), NULL, probe, "set probe DEVICE_REMOVED")); mutex_enter(&DEVI(probe)->devi_lock); DEVI_SET_DEVICE_REMOVED(probe); mutex_exit(&DEVI(probe)->devi_lock); scsi_hba_barrier_add(probe, scsi_hba_barrier_timeout); probe = NULL; } goto fail; } /* Create the child node from the inquiry data in the probe node. */ if ((child = scsi_device_configchild(self, addr, se, sdprobe, circp, &pi)) == NULL) { /* * This may fail because there was no driver binding identified * via driver_alias. We may still have a conf node. */ if (name) { (void) scsi_findchild(self, name, addr, 0, &child, NULL, &pi); if (child) SCSI_HBA_LOG((_LOG(2), NULL, child, "using driver.conf driver binding")); } if (child == NULL) { SCSI_HBA_LOG((_LOG(2), NULL, probe, "device not configured")); goto fail; } } /* * Transfer the inquiry data from the probe node to the child * SID node to avoid an extra scsi_probe. Callers depend on * established inquiry data for the returned scsi_device. */ sdchild = ddi_get_driver_private(child); if (sdchild && (sdchild->sd_inq == NULL)) { sdchild->sd_inq = sdprobe->sd_inq; sdprobe->sd_inq = NULL; } /* * If we are doing a bus_configone and the node we created has the * wrong node and driver name then switch the return result to a * driver.conf node with the correct name - if such a node exists. */ if (name && (strcmp(ddi_node_name(child), name) != 0) && (strcmp(ddi_driver_name(child), name) != 0)) { (void) scsi_findchild(self, name, addr, 0, &dsearch, NULL, &pi); if (dsearch == NULL) { SCSI_HBA_LOG((_LOG(2), NULL, child, "wrong device configured %s@%s", name, addr)); /* * We can't remove when modrootloaded == 0 in case * boot-device a uses generic name and * scsi_hba_nodename_compatible_get() returned a * legacy binding-set driver oriented name. */ if (modrootloaded) { (void) scsi_hba_remove_node(child); child = NULL; goto fail; } } else { SCSI_HBA_LOG((_LOG(2), NULL, dsearch, "device configured, but switching to driver.conf")); child = dsearch; } } /* get the scsi_device structure from the node */ SCSI_HBA_LOG((_LOG(3), NULL, child, "device configured")); if (child) { done: ASSERT(child); sdchild = ddi_get_driver_private(child); ASSERT(sdchild); /* * We may have ended up here after promotion of a previously * demoted node, where demotion deleted sd_inq data in * scsi_busctl_uninitchild. We redo the scsi_probe() to * reestablish sd_inq. We also want to redo the scsi_probe * for devices are currently device_isremove in order to * detect new device_insert. */ if ((sdchild->sd_inq == NULL) || ((pi == NULL) && ndi_devi_device_isremoved(child))) { /* hotplug_node can only be revived via hotplug. */ if ((se == SE_HP) || !ndi_dev_is_hotplug_node(child)) { SCSI_HBA_LOG((_LOG(3), NULL, child, "scsi_probe() demoted devinfo")); sp = scsi_probe(sdchild, SLEEP_FUNC); if (sp == SCSIPROBE_EXISTS) { ASSERT(sdchild->sd_inq); /* * Devinfo child exists and we are * talking to the device, report * reinsert and note if this was a * new reinsert. */ chg = ndi_devi_device_insert(child); SCSI_HBA_LOG((_LOGCFG, NULL, child, "devinfo %s@%s device_reinsert%s", name ? name : "", addr, chg ? "" : "ed already")); } else { scsi_enumeration_failed(child, se, NULL, "reprobe"); chg = ndi_devi_device_remove(child); SCSI_HBA_LOG((_LOG(2), NULL, child, "%s device_remove%s", (sp > (sizeof (scsi_probe_ascii) / sizeof (scsi_probe_ascii[0]))) ? "UNKNOWN" : scsi_probe_ascii[sp], chg ? "" : "ed already")); child = NULL; sdchild = NULL; } } else { SCSI_HBA_LOG((_LOG(2), NULL, child, "no reprobe")); child = NULL; sdchild = NULL; } } } else { fail: ASSERT(child == NULL); sdchild = NULL; } if (probe) { /* * Clean up probe node, destroying node if uninit_prevent * it is going to zero. Destroying the probe node (deleting * from the sibling list) will wake up any people waiting on * the probe node barrier. */ SCSI_HBA_LOG((_LOG(4), NULL, probe, "remove probe")); if (!scsi_hba_remove_node(probe)) { /* * Probe node removal should not fail, but if it * does we hand that responsibility over to the * async barrier deletion thread - other references * to the same unit-address can hang until the * probe node delete completes. */ SCSI_HBA_LOG((_LOG(4), NULL, probe, "remove probe failed, go async")); scsi_hba_barrier_add(probe, 1); } probe = NULL; } /* * If we successfully resolved via a pathinfo node, we need to find * the pathinfo node and ensure that it is online (if possible). This * is done for the case where the device was open when * scsi_device_unconfig occurred, so mdi_pi_free did not occur. If the * device has now been reinserted, we want the path back online. * NOTE: This needs to occur after destruction of the probe node to * avoid ASSERT related to two nodes at the same unit-address. */ if (sdchild && pi && (probe == NULL)) { ASSERT(MDI_PHCI(self)); (void) scsi_findchild(self, NULL, addr, 0, &dsearch, &psearch, NULL); ASSERT((psearch == NULL) || (mdi_pi_get_client(psearch) == child)); if (psearch && mdi_pi_device_isremoved(psearch)) { /* * Verify that we can talk to the device, and if * so note if this is a new device_insert. * * NOTE: We depend on mdi_path_select(), when given * a specific path_instance, to select that path * even if the path is offline. * * NOTE: A Client node is not ndi_dev_is_hotplug_node(). */ if (se == SE_HP) { SCSI_HBA_LOG((_LOG(3), NULL, child, "%s scsi_probe() demoted pathinfo", mdi_pi_spathname(psearch))); sp = scsi_hba_probe_pi(sdchild, SLEEP_FUNC, pi); if (sp == SCSIPROBE_EXISTS) { /* * Pathinfo child exists and we are * talking to the device, report * reinsert and note if this * was a new reinsert. */ chg = mdi_pi_device_insert(psearch); SCSI_HBA_LOG((_LOGCFG, self, NULL, "pathinfo %s device_reinsert%s", mdi_pi_spathname(psearch), chg ? "" : "ed already")); if (chg) (void) mdi_pi_online(psearch, 0); /* * Report client reinsert and note if * this was a new reinsert. */ chg = ndi_devi_device_insert(child); SCSI_HBA_LOG((_LOGCFG, NULL, child, "client devinfo %s@%s " "device_reinsert%s", name ? name : "", addr, chg ? "" : "ed already")); } else { scsi_enumeration_failed(child, se, mdi_pi_spathname(psearch), "reprobe"); child = NULL; sdchild = NULL; } } else { SCSI_HBA_LOG((_LOG(2), NULL, child, "%s no reprobe", mdi_pi_spathname(psearch))); child = NULL; sdchild = NULL; } } } /* If asked for path_instance, return it. */ if (ppi) *ppi = pi; return (sdchild); } static void scsi_device_unconfig(dev_info_t *self, char *name, char *addr, int *circp) { dev_info_t *child = NULL; mdi_pathinfo_t *path = NULL; char *spathname; int rval; ASSERT(self && addr && DEVI_BUSY_OWNED(self)); /* * We have a catch-22. We may have a demoted node that we need to find * and offline/remove. To find the node if it isn't demoted, we * use scsi_findchild. If it's demoted, we then use * ndi_devi_findchild_by_callback. */ (void) scsi_findchild(self, name, addr, 0, &child, &path, NULL); if ((child == NULL) && (path == NULL)) { child = ndi_devi_findchild_by_callback(self, name, addr, scsi_busctl_ua); if (child) { SCSI_HBA_LOG((_LOGUNCFG, self, NULL, "devinfo %s@%s found by callback", name ? name : "", addr)); ASSERT(ndi_flavor_get(child) == SCSA_FLAVOR_SCSI_DEVICE); if (ndi_flavor_get(child) != SCSA_FLAVOR_SCSI_DEVICE) { SCSI_HBA_LOG((_LOGUNCFG, self, NULL, "devinfo %s@%s not SCSI_DEVICE flavored", name ? name : "", addr)); child = NULL; } } } if (child) { ASSERT(child && (path == NULL)); /* Don't unconfig probe nodes. */ if (scsi_hba_devi_is_barrier(child)) { SCSI_HBA_LOG((_LOGUNCFG, self, NULL, "devinfo %s@%s is_barrier, skip", name ? name : "", addr)); return; } /* Attempt to offline/remove the devinfo node */ if (ndi_devi_offline(child, NDI_DEVFS_CLEAN | NDI_DEVI_REMOVE) == DDI_SUCCESS) { SCSI_HBA_LOG((_LOGUNCFG, self, NULL, "devinfo %s@%s offlined and removed", name ? name : "", addr)); } else if (ndi_devi_device_remove(child)) { /* Offline/remove failed, note new device_remove */ SCSI_HBA_LOG((_LOGUNCFG, self, NULL, "devinfo %s@%s offline failed, device_remove", name ? name : "", addr)); } } else if (path) { ASSERT(path && (child == NULL)); /* * Attempt to offline/remove the pathinfo node. * * NOTE: mdi_pi_offline of last path will fail if the * device is open (i.e. the client can't be offlined). * * NOTE: For mdi there is no REMOVE flag for mdi_pi_offline(). * When mdi_pi_offline returns MDI_SUCCESS, we are responsible * for remove via mdi_pi_free(). */ mdi_hold_path(path); spathname = mdi_pi_spathname(path); /* valid after free */ scsi_hba_devi_exit_phci(self, *circp); rval = mdi_pi_offline(path, 0); scsi_hba_devi_enter_phci(self, circp); /* Note new device_remove */ if (mdi_pi_device_remove(path)) SCSI_HBA_LOG((_LOGUNCFG, self, NULL, "pathinfo %s note device_remove", spathname)); mdi_rele_path(path); if (rval == MDI_SUCCESS) { (void) mdi_pi_free(path, 0); SCSI_HBA_LOG((_LOGUNCFG, self, NULL, "pathinfo %s offlined, then freed", spathname)); } } else { ASSERT((path == NULL) && (child == NULL)); SCSI_HBA_LOG((_LOGUNCFG, self, NULL, "%s@%s not found", name ? name : "", addr)); } } /* * configure the device at the specified "@addr" address. */ static struct scsi_device * scsi_hba_bus_configone_addr(dev_info_t *self, char *addr, scsi_enum_t se) { int circ; struct scsi_device *sd; scsi_hba_devi_enter(self, &circ); sd = scsi_device_config(self, NULL, addr, se, &circ, NULL); scsi_hba_devi_exit(self, circ); return (sd); } /* * unconfigure the device at the specified "@addr" address. */ static void scsi_hba_bus_unconfigone_addr(dev_info_t *self, char *addr) { int circ; scsi_hba_devi_enter(self, &circ); (void) scsi_device_unconfig(self, NULL, addr, &circ); scsi_hba_devi_exit(self, circ); } /* * The bus_config_all operations are multi-threaded for performance. A * separate thread per target and per LUN is used. The config handle is used * to coordinate all the threads at a given level and the config thread data * contains the required information for a specific thread to identify what it * is processing and the handle under which this is being processed. */ /* multi-threaded config handle */ struct scsi_hba_mte_h { dev_info_t *h_self; /* initiator port */ int h_thr_count; kmutex_t h_lock; kcondvar_t h_cv; }; /* target of 'self' config thread data */ struct scsi_hba_mte_td { struct scsi_hba_mte_h *td_h; char *td_taddr; /* target port */ int td_mt; scsi_enum_t td_se; }; /* Invoke callback on a vector of taddrs from multiple threads */ static void scsi_hba_thread_taddrs(dev_info_t *self, char **taddrs, int mt, scsi_enum_t se, void (*callback)(void *arg)) { struct scsi_hba_mte_h *h; /* HBA header */ struct scsi_hba_mte_td *td; /* target data */ char **taddr; /* allocate and initialize the handle */ h = kmem_zalloc(sizeof (*h), KM_SLEEP); mutex_init(&h->h_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&h->h_cv, NULL, CV_DEFAULT, NULL); h->h_self = self; /* loop over all the targets */ for (taddr = taddrs; *taddr; taddr++) { /* allocate a thread data structure for target */ td = kmem_alloc(sizeof (*td), KM_SLEEP); td->td_h = h; td->td_taddr = *taddr; td->td_mt = mt; td->td_se = se; /* process the target */ mutex_enter(&h->h_lock); h->h_thr_count++; mutex_exit(&h->h_lock); if (mt & SCSI_ENUMERATION_MT_TARGET_DISABLE) callback((void *)td); else (void) thread_create(NULL, 0, callback, (void *)td, 0, &p0, TS_RUN, minclsyspri); } /* wait for all the target threads to complete */ mutex_enter(&h->h_lock); while (h->h_thr_count > 0) cv_wait(&h->h_cv, &h->h_lock); mutex_exit(&h->h_lock); /* free the handle */ cv_destroy(&h->h_cv); mutex_destroy(&h->h_lock); kmem_free(h, sizeof (*h)); } /* lun/secondary function of lun0 config thread data */ struct scsi_hba_mte_ld { struct scsi_hba_mte_h *ld_h; char *ld_taddr; /* target port */ scsi_lun64_t ld_lun64; /* lun */ int ld_sfunc; /* secondary function */ scsi_enum_t ld_se; }; /* * Enumerate the LUNs and secondary functions of the specified target. The * target portion of the "@addr" is already represented as a string in the * thread data, we add a ",lun" representation to this and perform a * bus_configone byte of enumeration on that "@addr". */ static void scsi_hba_enum_lsf_of_tgt_thr(void *arg) { struct scsi_hba_mte_ld *ld = (struct scsi_hba_mte_ld *)arg; struct scsi_hba_mte_h *h = ld->ld_h; dev_info_t *self = h->h_self; char addr[SCSI_MAXNAMELEN]; /* make string form of "@taddr,lun[,sfunc]" and see if it exists */ if (ld->ld_sfunc == -1) (void) snprintf(addr, sizeof (addr), "%s,%" PRIx64, ld->ld_taddr, ld->ld_lun64); else (void) snprintf(addr, sizeof (addr), "%s,%" PRIx64 ",%x", ld->ld_taddr, ld->ld_lun64, ld->ld_sfunc); /* configure device at that unit-address address */ (void) scsi_hba_bus_configone_addr(self, addr, ld->ld_se); /* signal completion of this LUN thread to the target */ mutex_enter(&h->h_lock); if (--h->h_thr_count == 0) cv_broadcast(&h->h_cv); mutex_exit(&h->h_lock); /* free config thread data */ kmem_free(ld, sizeof (*ld)); } /* Format of SCSI REPORT_LUNS report */ typedef struct scsi_lunrpt { uchar_t lunrpt_len_msb; /* # LUNs being reported */ uchar_t lunrpt_len_mmsb; uchar_t lunrpt_len_mlsb; uchar_t lunrpt_len_lsb; uchar_t lunrpt_reserved[4]; scsi_lun_t lunrpt_luns[1]; /* LUNs, variable size */ } scsi_lunrpt_t; /* * scsi_device_reportluns() * * Callers of this routine should ensure that the 'sd0' scsi_device structure * and 'pi' path_instance specified are associated with a responding LUN0. * This should not be called for SCSI-1 devices. * * To get a LUN report, we must allocate a buffer. To know how big to make the * buffer, we must know the number of LUNs. To know the number of LUNs, we must * get a LUN report. We first issue a SCMD_REPORT_LUNS command using a * reasonably sized buffer that's big enough to report all LUNs for most * typical devices. If it turns out that we needed a bigger buffer, we attempt * to allocate a buffer of sufficient size, and reissue the command. If the * first command succeeds, but the second fails, we return whatever we were * able to get the first time. We return enough information for the caller to * tell whether he got all the LUNs or only a subset. * * If successful, we allocate an array of scsi_lun_t to hold the results. The * caller must kmem_free(*lunarrayp, *sizep) when finished with it. Upon * successful return return value is NDI_SUCCESS and: * * *lunarrayp points to the allocated array, * *nlunsp is the number of valid LUN entries in the array, * *tlunsp is the total number of LUNs in the target, * *sizep is the size of the lunarrayp array, which must be freed. * * If the *nlunsp is less than *tlunsp, then we were only able to retrieve a * subset of the total set of LUNs in the target. */ static int scsi_device_reportluns(struct scsi_device *sd0, char *taddr, int pi, scsi_lun_t **lunarrayp, uint32_t *nlunsp, uint32_t *tlunsp, size_t *sizep) { struct buf *lunrpt_bp; struct scsi_pkt *lunrpt_pkt; scsi_lunrpt_t *lunrpt; uint32_t bsize; uint32_t tluns, nluns; int default_maxluns = scsi_lunrpt_default_max; dev_info_t *child; ASSERT(sd0 && lunarrayp && nlunsp && tlunsp && sizep); /* * NOTE: child should only be used in SCSI_HBA_LOG context since with * vHCI enumeration it may be the vHCI 'client' devinfo child instead * of a child of the 'self' pHCI we are enumerating. */ child = sd0->sd_dev; /* first try, look for up to scsi_lunrpt_default_max LUNs */ nluns = default_maxluns; again: bsize = sizeof (struct scsi_lunrpt) + ((nluns - 1) * sizeof (struct scsi_lun)); lunrpt_bp = scsi_alloc_consistent_buf(&sd0->sd_address, (struct buf *)NULL, bsize, B_READ, SLEEP_FUNC, NULL); if (lunrpt_bp == NULL) { SCSI_HBA_LOG((_LOG(1), NULL, child, "failed alloc")); return (NDI_NOMEM); } lunrpt_pkt = scsi_init_pkt(&sd0->sd_address, (struct scsi_pkt *)NULL, lunrpt_bp, CDB_GROUP5, sizeof (struct scsi_arq_status), 0, PKT_CONSISTENT, SLEEP_FUNC, NULL); if (lunrpt_pkt == NULL) { SCSI_HBA_LOG((_LOG(1), NULL, child, "failed init")); scsi_free_consistent_buf(lunrpt_bp); return (NDI_NOMEM); } (void) scsi_setup_cdb((union scsi_cdb *)lunrpt_pkt->pkt_cdbp, SCMD_REPORT_LUNS, 0, bsize, 0); lunrpt_pkt->pkt_time = scsi_lunrpt_timeout; /* * When sd0 is a vHCI scsi device, we need reportlun to be issued * against a specific LUN0 path_instance that we are enumerating. */ lunrpt_pkt->pkt_path_instance = pi; lunrpt_pkt->pkt_flags |= FLAG_PKT_PATH_INSTANCE; /* * NOTE: scsi_poll may not allow HBA specific recovery from TRAN_BUSY. */ if (scsi_poll(lunrpt_pkt) < 0) { SCSI_HBA_LOG((_LOG(2), NULL, child, "reportlun not supported")); scsi_destroy_pkt(lunrpt_pkt); scsi_free_consistent_buf(lunrpt_bp); return (NDI_FAILURE); } scsi_destroy_pkt(lunrpt_pkt); lunrpt = (scsi_lunrpt_t *)lunrpt_bp->b_un.b_addr; /* Compute the total number of LUNs in the target */ tluns = (((uint_t)lunrpt->lunrpt_len_msb << 24) | ((uint_t)lunrpt->lunrpt_len_mmsb << 16) | ((uint_t)lunrpt->lunrpt_len_mlsb << 8) | ((uint_t)lunrpt->lunrpt_len_lsb)) >> 3; if (tluns == 0) { /* Illegal response -- this target is broken */ SCSI_HBA_LOG((_LOG(1), NULL, child, "illegal tluns of zero")); scsi_free_consistent_buf(lunrpt_bp); return (DDI_NOT_WELL_FORMED); } if (tluns > nluns) { /* have more than we allocated space for */ if (nluns == default_maxluns) { /* first time around, reallocate larger */ scsi_free_consistent_buf(lunrpt_bp); nluns = tluns; goto again; } /* uh oh, we got a different tluns the second time! */ SCSI_HBA_LOG((_LOG(1), NULL, child, "tluns changed from %d to %d", nluns, tluns)); } else nluns = tluns; /* * Now we have: * lunrpt_bp is the buffer we're using; * tluns is the total number of LUNs the target says it has; * nluns is the number of LUNs we were able to get into the buffer. * * Copy the data out of scarce iopb memory into regular kmem. * The caller must kmem_free(*lunarrayp, *sizep) when finished with it. */ *lunarrayp = (scsi_lun_t *)kmem_alloc( nluns * sizeof (scsi_lun_t), KM_SLEEP); if (*lunarrayp == NULL) { SCSI_HBA_LOG((_LOG(1), NULL, child, "NULL lunarray")); scsi_free_consistent_buf(lunrpt_bp); return (NDI_NOMEM); } *sizep = nluns * sizeof (scsi_lun_t); *nlunsp = nluns; *tlunsp = tluns; bcopy((void *)&lunrpt->lunrpt_luns, (void *)*lunarrayp, *sizep); scsi_free_consistent_buf(lunrpt_bp); SCSI_HBA_LOG((_LOG(3), NULL, child, "@%s,0 path %d: %d/%d luns", taddr, pi, nluns, tluns)); return (NDI_SUCCESS); } /* * Enumerate all the LUNs and secondary functions of the specified 'taddr' * target port as accessed via 'self' pHCI. Note that sd0 may be associated * with a child of the vHCI instead of 'self' - in this case the 'pi' * path_instance is used to ensure that the SCMD_REPORT_LUNS command is issued * through the 'self' pHCI path. * * We multi-thread across all the LUNs and secondary functions and enumerate * them. Which LUNs exist is based on SCMD_REPORT_LUNS data. * * The scsi_device we are called with should be for LUN0 and has been probed. * * This function is structured so that an HBA that has a different target * addressing structure can still use this function to enumerate the its * LUNs if it uses "taddr,lun" for its LUN space. * * We make assumptions about other LUNs associated with the target: * * For SCSI-2 and SCSI-3 target we will issue the SCSI report_luns * command. If this fails or we have a SCSI-1 then the number of * LUNs is determined based on SCSI_OPTIONS_NLUNS. For a SCSI-1 * target we never probe above LUN 8, even if SCSI_OPTIONS_NLUNS * indicates we should. * * HBA drivers wanting a different set of assumptions should implement their * own LUN enumeration code. */ static int scsi_hba_enum_lsf_of_t(struct scsi_device *sd0, dev_info_t *self, char *taddr, int pi, int mt, scsi_enum_t se) { dev_info_t *child; scsi_hba_tran_t *tran; impl_scsi_tgtmap_t *tgtmap; damap_id_t tgtid; damap_t *tgtdam; damap_t *lundam = NULL; struct scsi_hba_mte_h *h; struct scsi_hba_mte_ld *ld; int aver; scsi_lun_t *lunp = NULL; int lun; uint32_t nluns; uint32_t tluns; size_t size; scsi_lun64_t lun64; int maxluns; /* * If LUN0 failed then we have no other LUNs. * * NOTE: We need sd_inq to be valid to check ansi version. Since * scsi_unprobe is now a noop (sd_inq freeded in * scsi_busctl_uninitchild) sd_inq remains valid even if a target * driver detach(9E) occurs, resulting in a scsi_unprobe call * (sd_uninit_prevent keeps sd_inq valid by failing any * device_uninitchild attempts). */ ASSERT(sd0 && sd0->sd_uninit_prevent && sd0->sd_dev && sd0->sd_inq); if ((sd0 == NULL) || (sd0->sd_dev == NULL) || (sd0->sd_inq == NULL)) { SCSI_HBA_LOG((_LOG(1), NULL, sd0 ? sd0->sd_dev : NULL, "not setup correctly:%s%s%s", (sd0 == NULL) ? " device" : "", (sd0 && (sd0->sd_dev == NULL)) ? " dip" : "", (sd0 && (sd0->sd_inq == NULL)) ? " inq" : "")); return (DDI_FAILURE); } /* * NOTE: child should only be used in SCSI_HBA_LOG context since with * vHCI enumeration it may be the vHCI 'client' devinfo child instead * of a child of the 'self' pHCI we are enumerating. */ child = sd0->sd_dev; /* Determine if we are reporting lun observations into lunmap. */ tran = ndi_flavorv_get(self, SCSA_FLAVOR_SCSI_DEVICE); tgtmap = (impl_scsi_tgtmap_t *)tran->tran_tgtmap; if (tgtmap) { tgtdam = tgtmap->tgtmap_dam[SCSI_TGT_SCSI_DEVICE]; tgtid = damap_lookup(tgtdam, taddr); if (tgtid != NODAM) { lundam = damap_id_priv_get(tgtdam, tgtid); damap_id_rele(tgtdam, tgtid); ASSERT(lundam); } } if (lundam) { /* If using lunmap, start the observation */ scsi_lunmap_set_begin(self, lundam); } else { /* allocate and initialize the LUN handle */ h = kmem_zalloc(sizeof (*h), KM_SLEEP); mutex_init(&h->h_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&h->h_cv, NULL, CV_DEFAULT, NULL); h->h_self = self; } /* See if SCMD_REPORT_LUNS works for SCSI-2 and beyond */ aver = sd0->sd_inq->inq_ansi; if ((aver >= SCSI_VERSION_2) && (scsi_device_reportluns(sd0, taddr, pi, &lunp, &nluns, &tluns, &size) == NDI_SUCCESS)) { ASSERT(lunp && (size > 0) && (nluns > 0) && (tluns > 0)); /* loop over the reported LUNs */ SCSI_HBA_LOG((_LOG(2), NULL, child, "@%s,0 path %d: enumerating %d reported lun%s", taddr, pi, nluns, nluns > 1 ? "s" : "")); for (lun = 0; lun < nluns; lun++) { lun64 = scsi_lun_to_lun64(lunp[lun]); if (lundam) { if (scsi_lunmap_set_add(self, lundam, taddr, lun64, -1) != DDI_SUCCESS) { SCSI_HBA_LOG((_LOG_NF(WARN), "@%s,%" PRIx64 " failed to create", taddr, lun64)); } } else { if (lun64 == 0) continue; /* allocate a thread data structure for LUN */ ld = kmem_alloc(sizeof (*ld), KM_SLEEP); ld->ld_h = h; ld->ld_taddr = taddr; ld->ld_lun64 = lun64; ld->ld_sfunc = -1; ld->ld_se = se; /* process the LUN */ mutex_enter(&h->h_lock); h->h_thr_count++; mutex_exit(&h->h_lock); if (mt & SCSI_ENUMERATION_MT_LUN_DISABLE) scsi_hba_enum_lsf_of_tgt_thr( (void *)ld); else (void) thread_create(NULL, 0, scsi_hba_enum_lsf_of_tgt_thr, (void *)ld, 0, &p0, TS_RUN, minclsyspri); } } /* free the LUN array allocated by scsi_device_reportluns */ kmem_free(lunp, size); } else { /* Determine the number of LUNs to enumerate. */ maxluns = scsi_get_scsi_maxluns(sd0); /* Couldn't get SCMD_REPORT_LUNS data */ if (aver >= SCSI_VERSION_3) { scsi_enumeration_failed(child, se, taddr, "report_lun"); /* * Based on calling context tunable, only enumerate one * lun (lun0) if scsi_device_reportluns() fails on a * SCSI_VERSION_3 or greater device. */ if (scsi_lunrpt_failed_do1lun & (1 << se)) maxluns = 1; } /* loop over possible LUNs, skipping LUN0 */ if (maxluns > 1) SCSI_HBA_LOG((_LOG(2), NULL, child, "@%s,0 path %d: enumerating luns 1-%d", taddr, pi, maxluns - 1)); else SCSI_HBA_LOG((_LOG(2), NULL, child, "@%s,0 path %d: enumerating just lun0", taddr, pi)); for (lun64 = 0; lun64 < maxluns; lun64++) { if (lundam) { if (scsi_lunmap_set_add(self, lundam, taddr, lun64, -1) != DDI_SUCCESS) { SCSI_HBA_LOG((_LOG_NF(WARN), "@%s,%" PRIx64 " failed to create", taddr, lun64)); } } else { if (lun64 == 0) continue; /* allocate a thread data structure for LUN */ ld = kmem_alloc(sizeof (*ld), KM_SLEEP); ld->ld_h = h; ld->ld_taddr = taddr; ld->ld_lun64 = lun64; ld->ld_sfunc = -1; ld->ld_se = se; /* process the LUN */ mutex_enter(&h->h_lock); h->h_thr_count++; mutex_exit(&h->h_lock); if (mt & SCSI_ENUMERATION_MT_LUN_DISABLE) scsi_hba_enum_lsf_of_tgt_thr( (void *)ld); else (void) thread_create(NULL, 0, scsi_hba_enum_lsf_of_tgt_thr, (void *)ld, 0, &p0, TS_RUN, minclsyspri); } } } /* * If we have an embedded service as a secondary function on LUN0 and * the primary LUN0 function is different than the secondary function * then enumerate the secondary function. The sfunc value is the dtype * associated with the embedded service. * * inq_encserv: enclosure service and our dtype is not DTYPE_ESI * or DTYPE_UNKNOWN then create a separate DTYPE_ESI node for * enclosure service access. */ ASSERT(sd0->sd_inq); if (sd0->sd_inq->inq_encserv && ((sd0->sd_inq->inq_dtype & DTYPE_MASK) != DTYPE_UNKNOWN) && ((sd0->sd_inq->inq_dtype & DTYPE_MASK) != DTYPE_ESI) && ((sd0->sd_inq->inq_ansi >= SCSI_VERSION_3))) { if (lundam) { if (scsi_lunmap_set_add(self, lundam, taddr, 0, DTYPE_ESI) != DDI_SUCCESS) { SCSI_HBA_LOG((_LOG_NF(WARN), "@%s,0,%x failed to create", taddr, DTYPE_ESI)); } } else { /* allocate a thread data structure for sfunc */ ld = kmem_alloc(sizeof (*ld), KM_SLEEP); ld->ld_h = h; ld->ld_taddr = taddr; ld->ld_lun64 = 0; ld->ld_sfunc = DTYPE_ESI; ld->ld_se = se; /* process the LUN */ mutex_enter(&h->h_lock); h->h_thr_count++; mutex_exit(&h->h_lock); if (mt & SCSI_ENUMERATION_MT_LUN_DISABLE) scsi_hba_enum_lsf_of_tgt_thr((void *)ld); else (void) thread_create(NULL, 0, scsi_hba_enum_lsf_of_tgt_thr, (void *)ld, 0, &p0, TS_RUN, minclsyspri); } } /* * Future: Add secondary function support for: * inq_mchngr (DTYPE_CHANGER) * inq_sccs (DTYPE_ARRAY_CTRL) */ if (lundam) { /* If using lunmap, end the observation */ scsi_lunmap_set_end(self, lundam); } else { /* wait for all the LUN threads of this target to complete */ mutex_enter(&h->h_lock); while (h->h_thr_count > 0) cv_wait(&h->h_cv, &h->h_lock); mutex_exit(&h->h_lock); /* free the target handle */ cv_destroy(&h->h_cv); mutex_destroy(&h->h_lock); kmem_free(h, sizeof (*h)); } return (DDI_SUCCESS); } /* * Enumerate LUN0 and all other LUNs and secondary functions associated with * the specified target address. * * Return NDI_SUCCESS if we might have created a new node. * Return NDI_FAILURE if we definitely did not create a new node. */ static int scsi_hba_bus_config_taddr(dev_info_t *self, char *taddr, int mt, scsi_enum_t se) { char addr[SCSI_MAXNAMELEN]; struct scsi_device *sd; int circ; int ret; int pi; /* See if LUN0 of the specified target exists. */ (void) snprintf(addr, sizeof (addr), "%s,0", taddr); scsi_hba_devi_enter(self, &circ); sd = scsi_device_config(self, NULL, addr, se, &circ, &pi); if (sd) { /* * LUN0 exists, enumerate all the other LUNs. * * With vHCI enumeration, when 'self' is a pHCI the sd * scsi_device may be associated with the vHCI 'client'. * In this case 'pi' is the path_instance needed to * continue enumeration communication LUN0 via 'self' * pHCI and specific 'taddr' target address. * * We prevent the removal of LUN0 until we are done with * prevent/allow because we must exit the parent for * multi-threaded scsi_hba_enum_lsf_of_t(). * * NOTE: scsi_unprobe is a noop, sd->sd_inq is valid until * device_uninitchild - so sd_uninit_prevent keeps sd_inq valid * by failing any device_uninitchild attempts. */ ret = NDI_SUCCESS; sd->sd_uninit_prevent++; scsi_hba_devi_exit(self, circ); (void) scsi_hba_enum_lsf_of_t(sd, self, taddr, pi, mt, se); scsi_hba_devi_enter(self, &circ); sd->sd_uninit_prevent--; } else ret = NDI_FAILURE; scsi_hba_devi_exit(self, circ); return (ret); } /* Config callout from scsi_hba_thread_taddrs */ static void scsi_hba_taddr_config_thr(void *arg) { struct scsi_hba_mte_td *td = (struct scsi_hba_mte_td *)arg; struct scsi_hba_mte_h *h = td->td_h; (void) scsi_hba_bus_config_taddr(h->h_self, td->td_taddr, td->td_mt, td->td_se); /* signal completion of this target thread to the HBA */ mutex_enter(&h->h_lock); if (--h->h_thr_count == 0) cv_broadcast(&h->h_cv); mutex_exit(&h->h_lock); /* free config thread data */ kmem_free(td, sizeof (*td)); } /* * Enumerate all the children of the specified SCSI parallel interface (spi). * An HBA associated with a non-parallel scsi bus should be using another bus * level enumeration implementation (possibly their own) and calling * scsi_hba_bus_config_taddr to do enumeration of devices associated with a * particular target address. * * On an spi bus the targets are sequentially enumerated based on the * width of the bus. We also take care to try to skip the HBAs own initiator * id. See scsi_hba_enum_lsf_of_t() for LUN and secondary function enumeration. * * Return NDI_SUCCESS if we might have created a new node. * Return NDI_FAILURE if we definitely did not create a new node. * * Note: At some point we may want to expose this interface in transport.h * if we find an hba that implements bus_config but still uses spi-like target * addresses. */ static int scsi_hba_bus_configall_spi(dev_info_t *self, int mt) { int options; int ntargets; int id; int tgt; char **taddrs; char **taddr; char *tbuf; /* * Find the number of targets supported on the bus. Look at the per * bus scsi-options property on the HBA node and check its * SCSI_OPTIONS_WIDE setting. */ options = ddi_prop_get_int(DDI_DEV_T_ANY, self, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "scsi-options", -1); if ((options != -1) && ((options & SCSI_OPTIONS_WIDE) == 0)) ntargets = NTARGETS; /* 8 */ else ntargets = NTARGETS_WIDE; /* 16 */ /* * Find the initiator-id for the HBA so we can skip that. We get the * cached value on the HBA node, established in scsi_hba_attach_setup. * If we were unable to determine the id then we rely on the HBA to * fail gracefully when asked to enumerate itself. */ id = ddi_prop_get_int(DDI_DEV_T_ANY, self, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "scsi-initiator-id", -1); if (id > ntargets) { SCSI_HBA_LOG((_LOG(1), self, NULL, "'scsi-initiator-id' bogus for %d target bus: %d", ntargets, id)); id = -1; } SCSI_HBA_LOG((_LOG(2), self, NULL, "enumerating targets 0-%d skip %d", ntargets, id)); /* form vector of target addresses */ taddrs = kmem_zalloc(sizeof (char *) * (ntargets + 1), KM_SLEEP); for (tgt = 0, taddr = taddrs; tgt < ntargets; tgt++) { /* skip initiator */ if (tgt == id) continue; /* convert to string and enumerate the target address */ tbuf = kmem_alloc(((tgt/16) + 1) + 1, KM_SLEEP); (void) sprintf(tbuf, "%x", tgt); ASSERT(strlen(tbuf) == ((tgt/16) + 1)); *taddr++ = tbuf; } /* null terminate vector of target addresses */ *taddr = NULL; /* configure vector of target addresses */ scsi_hba_thread_taddrs(self, taddrs, mt, SE_BUSCONFIG, scsi_hba_taddr_config_thr); /* free vector of target addresses */ for (taddr = taddrs; *taddr; taddr++) kmem_free(*taddr, strlen(*taddr) + 1); kmem_free(taddrs, sizeof (char *) * (ntargets + 1)); return (NDI_SUCCESS); } /* * Transport independent bus_configone BUS_CONFIG_ONE implementation. Takes * same arguments, minus op, as scsi_hba_bus_config(), tran_bus_config(), * and scsi_hba_bus_config_spi(). */ int scsi_hba_bus_configone(dev_info_t *self, uint_t flags, char *arg, dev_info_t **childp) { int ret; int circ; char *name, *addr; char *lcp; char sc1, sc2; char nameaddr[SCSI_MAXNAMELEN]; extern int i_ndi_make_spec_children(dev_info_t *, uint_t); struct scsi_device *sd0, *sd; scsi_lun64_t lun64; int mt; /* parse_name modifies arg1, we must duplicate "name@addr" */ (void) strcpy(nameaddr, arg); i_ddi_parse_name(nameaddr, &name, &addr, NULL); /* verify the form of the node - we need an @addr */ if ((name == NULL) || (addr == NULL) || (*name == '\0') || (*addr == '\0')) { /* * OBP may create ill formed template/stub/wild-card * nodes (no @addr) for legacy driver loading methods - * ignore them. */ SCSI_HBA_LOG((_LOG(2), self, NULL, "%s ill formed", arg)); return (NDI_FAILURE); } /* * Check to see if this is a non-scsi flavor configuration operation. */ if (strcmp(name, "smp") == 0) { /* * Configure the child, and if we're successful return with * active hold. */ return (smp_hba_bus_config(self, addr, childp)); } /* * The framework does not ensure the creation of driver.conf * nodes prior to calling a nexus bus_config. For legacy * support of driver.conf file nodes we want to create our * driver.conf file children now so that we can detect if we * are being asked to bus_configone one of these nodes. * * Needing driver.conf file nodes prior to bus config is unique * to scsi_enumeration mixed mode (legacy driver.conf and * dynamic SID node) support. There is no general need for the * framework to make driver.conf children prior to bus_config. * * We enter our HBA (self) prior to scsi_device_config, and * pass it our circ. The scsi_device_config may exit the * HBA around scsi_probe() operations to allow for parallelism. * This is done after the probe node "@addr" is available as a * barrier to prevent parallel probes of the same device. The * probe node is also configured in a way that it can't be * removed by the framework until we are done with it. * * NOTE: The framework is currently preventing many parallel * sibling operations (such as attaches), so the parallelism * we are providing is of marginal use until that is improved. * The most logical way to solve this would be to have separate * target and lun nodes. This would be a large change in the * format of /devices paths and is not being pursued at this * time. The need for parallelism will become more of an issue * with top-down attach for mpxio/vhci and for iSCSI support. * We may want to eventually want a dual mode implementation, * where the HBA determines if we should construct separate * target and lun devinfo nodes. */ scsi_hba_devi_enter(self, &circ); SCSI_HBA_LOG((_LOG(4), self, NULL, "%s@%s config_one", name, addr)); (void) i_ndi_make_spec_children(self, flags); /* * For bus_configone, we make sure that we can find LUN0 * first. This allows the delayed probe/barrier deletion for a * non-existent LUN0 (if enabled in scsi_device_config) to * cover all LUNs on the target. This is done to minimize the * number of independent target selection timeouts that occur * when a target with many LUNs is no longer accessible * (powered off). This removes the need for target driver * probe cache implementations. * * This optimization may not be desirable in a pure bridge * environment where targets on the other side of the bridge * show up as LUNs to the host. If we ever need to support * such a configuration then we should consider implementing a * SCSI_OPTIONS_ILUN0 bit. * * NOTE: we are *not* applying any target limitation filtering * to bus_configone, which means that we are relying on the * HBA tran_tgt_init entry point invoked by scsi_busctl_initchild * to fail. */ sd0 = (struct scsi_device *)-1; lcp = strchr(addr, ','); /* "addr,lun[,sfunc]" */ if (lcp) { /* * With "tgt,lun[,sfunc]" addressing, multiple addressing levels * have been compressed into single devinfo node unit-address. * This presents a mismatch - there is no bus_config to discover * LUNs below a specific target, the only choice is to * BUS_CONFIG_ALL the HBA. To support BUS_CONFIG_ALL_LUNS below * a specific target, a bus_configone with lun address of "*" * triggers lun discovery below a target. */ if (*(lcp + 1) == '*') { mt = ddi_prop_get_int(DDI_DEV_T_ANY, self, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "scsi-enumeration", scsi_enumeration); mt |= scsi_hba_log_mt_disable; SCSI_HBA_LOG((_LOG(2), self, NULL, "%s@%s lun enumeration triggered", name, addr)); *lcp = '\0'; /* turn ',' into '\0' */ scsi_hba_devi_exit(self, circ); (void) scsi_hba_bus_config_taddr(self, addr, mt, SE_BUSCONFIG); return (NDI_FAILURE); } /* convert hex lun number from ascii */ lun64 = scsi_addr_to_lun64(lcp + 1); if ((lun64 != 0) && (lun64 != SCSI_LUN64_ILLEGAL)) { /* * configure ",0" lun first, saving off * original lun characters. */ sc1 = *(lcp + 1); sc2 = *(lcp + 2); *(lcp + 1) = '0'; *(lcp + 2) = '\0'; sd0 = scsi_device_config(self, NULL, addr, SE_BUSCONFIG, &circ, NULL); /* restore original lun */ *(lcp + 1) = sc1; *(lcp + 2) = sc2; /* * Apply maxlun filtering. * * Future: We still have the kludged * scsi_check_ss2_LUN_limit() filtering off * scsi_probe() to catch bogus driver.conf * entries. */ if (sd0 && (lun64 < SCSI_32LUNS_PER_TARGET) && (lun64 >= scsi_get_scsi_maxluns(sd0))) { sd0 = NULL; SCSI_HBA_LOG((_LOG(4), self, NULL, "%s@%s filtered", name, addr)); } else SCSI_HBA_LOG((_LOG(4), self, NULL, "%s@%s lun 0 %s", name, addr, sd0 ? "worked" : "failed")); } } /* * configure the requested device if LUN0 exists or we were * unable to determine the lun format to determine if LUN0 * exists. */ if (sd0) { sd = scsi_device_config(self, name, addr, SE_BUSCONFIG, &circ, NULL); } else { sd = NULL; SCSI_HBA_LOG((_LOG(2), self, NULL, "%s@%s no lun 0 or filtered lun", name, addr)); } /* * We know what we found, to reduce overhead we finish BUS_CONFIG_ONE * processing without calling back to the frameworks * ndi_busop_bus_config (unless we goto framework below). * * If the reference is to a driver name and we created a generic name * (bound to that driver) we will still succeed. This is important * for correctly resolving old drivername references to device that now * uses a generic names across the transition to generic naming. This * is effectively an internal implementation of the NDI_DRIVERNAME flag. * * We also need to special case the resolve_pathname OBP boot-device * case (modrootloaded == 0) where reference is to a generic name but * we created a legacy driver name node by returning just returning * the node created. */ if (sd && sd->sd_dev && ((strcmp(ddi_node_name(sd->sd_dev), name) == 0) || (strcmp(ddi_driver_name(sd->sd_dev), name) == 0) || (modrootloaded == 0)) && (ndi_devi_online(sd->sd_dev, flags & NDI_NO_EVENT) == NDI_SUCCESS)) { /* device attached, return devinfo node with hold */ ret = NDI_SUCCESS; *childp = sd->sd_dev; ndi_hold_devi(sd->sd_dev); } else { /* * In the process of failing we may have added nodes to the HBA * (self), clearing DEVI_MADE_CHILDREN. To reduce the overhead * associated with the frameworks reaction to this we clear the * flag here. */ mutex_enter(&DEVI(self)->devi_lock); DEVI(self)->devi_flags &= ~DEVI_MADE_CHILDREN; mutex_exit(&DEVI(self)->devi_lock); ret = NDI_FAILURE; /* * The framework may still be able to succeed with * with its GENERIC_PROP code. */ scsi_hba_devi_exit(self, circ); if (flags & NDI_DRV_CONF_REPROBE) flags |= NDI_CONFIG_REPROBE; flags |= NDI_MDI_FALLBACK; /* devinfo&pathinfo children */ return (ndi_busop_bus_config(self, flags, BUS_CONFIG_ONE, (void *)arg, childp, 0)); } scsi_hba_devi_exit(self, circ); return (ret); } /* * Perform SCSI Parallel Interconnect bus_config */ static int scsi_hba_bus_config_spi(dev_info_t *self, uint_t flags, ddi_bus_config_op_t op, void *arg, dev_info_t **childp) { int ret; int mt; /* * Enumerate scsi target devices: See if we are doing generic dynamic * enumeration: if driver.conf has not specified the 'scsi-enumeration' * knob then use the global scsi_enumeration knob. */ mt = ddi_prop_get_int(DDI_DEV_T_ANY, self, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "scsi-enumeration", scsi_enumeration); mt |= scsi_hba_log_mt_disable; if ((mt & SCSI_ENUMERATION_ENABLE) == 0) { /* * Static driver.conf file enumeration: * * Force reprobe for BUS_CONFIG_ONE or when manually * reconfiguring via devfsadm(1m) to emulate deferred attach. * Reprobe only discovers driver.conf enumerated nodes, more * dynamic implementations probably require their own * bus_config. */ if ((op == BUS_CONFIG_ONE) || (flags & NDI_DRV_CONF_REPROBE)) flags |= NDI_CONFIG_REPROBE; flags |= NDI_MDI_FALLBACK; /* devinfo&pathinfo children */ return (ndi_busop_bus_config(self, flags, op, arg, childp, 0)); } if (scsi_hba_bus_config_debug) flags |= NDI_DEVI_DEBUG; /* * Generic spi dynamic bus config enumeration to discover and enumerate * the target device nodes we are looking for. */ switch (op) { case BUS_CONFIG_ONE: /* enumerate the named child */ ret = scsi_hba_bus_configone(self, flags, (char *)arg, childp); break; case BUS_CONFIG_ALL: /* enumerate all children on the bus */ case BUS_CONFIG_DRIVER: /* enumerate all children that bind to driver */ SCSI_HBA_LOG((_LOG(3), self, NULL, "BUS_CONFIG_%s mt %x", (op == BUS_CONFIG_ALL) ? "ALL" : "DRIVER", mt)); /* * Enumerate targets on SCSI parallel interconnect and let the * framework finish the operation (attach the nodes). */ if ((ret = scsi_hba_bus_configall_spi(self, mt)) == NDI_SUCCESS) ret = ndi_busop_bus_config(self, flags, op, arg, childp, 0); break; default: ret = NDI_FAILURE; break; } return (ret); } /* * Perform SCSI Parallel Interconnect bus_unconfig */ static int scsi_hba_bus_unconfig_spi(dev_info_t *self, uint_t flags, ddi_bus_config_op_t op, void *arg) { int mt; int circ; int ret; /* * See if we are doing generic dynamic enumeration: if driver.conf has * not specified the 'scsi-enumeration' knob then use the global * scsi_enumeration knob. */ mt = ddi_prop_get_int(DDI_DEV_T_ANY, self, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "scsi-enumeration", scsi_enumeration); mt |= scsi_hba_log_mt_disable; if ((mt & SCSI_ENUMERATION_ENABLE) == 0) return (ndi_busop_bus_unconfig(self, flags, op, arg)); if (scsi_hba_bus_config_debug) flags |= NDI_DEVI_DEBUG; scsi_hba_devi_enter(self, &circ); switch (op) { case BUS_UNCONFIG_ONE: SCSI_HBA_LOG((_LOG(3), self, NULL, "unconfig one: %s", (char *)arg)); ret = NDI_SUCCESS; break; case BUS_UNCONFIG_ALL: case BUS_UNCONFIG_DRIVER: ret = NDI_SUCCESS; break; default: ret = NDI_FAILURE; break; } /* Perform the generic default bus unconfig */ if (ret == NDI_SUCCESS) ret = ndi_busop_bus_unconfig(self, flags, op, arg); scsi_hba_devi_exit(self, circ); return (ret); } static int scsi_hba_bus_config_tgtmap(dev_info_t *self, uint_t flags, ddi_bus_config_op_t op, void *arg, dev_info_t **childp) { scsi_hba_tran_t *tran; impl_scsi_tgtmap_t *tgtmap; uint64_t tsa = 0; /* clock64_t */ int maxdev; int sync_usec; int synced; int ret = NDI_FAILURE; if ((op != BUS_CONFIG_ONE) && (op != BUS_CONFIG_ALL) && (op != BUS_CONFIG_DRIVER)) goto out; tran = ndi_flavorv_get(self, SCSA_FLAVOR_SCSI_DEVICE); tgtmap = (impl_scsi_tgtmap_t *)tran->tran_tgtmap; ASSERT(tgtmap); /* * MPXIO is never a sure thing (and we have mixed children), so * set NDI_NDI_FALLBACK so that ndi_busop_bus_config will * search for both devinfo and pathinfo children. * * Future: Remove NDI_MDI_FALLBACK since devcfg.c now looks for * devinfo/pathinfo children in parallel (instead of old way of * looking for one form of child and then doing "fallback" to * look for other form of child). */ flags |= NDI_MDI_FALLBACK; /* devinfo&pathinfo children */ /* * If bus_config occurred within the map create-to-hotplug_sync window, * we need the framework to wait for children that are physicaly * present at map create time to show up (via tgtmap hotplug config). * * The duration of this window is specified by the HBA driver at * scsi_hba_tgtmap_create(9F) time (during attach(9E)). Its * 'csync_usec' value is selected based on how long it takes the HBA * driver to get from map creation to initial observation for something * already plugged in. Estimate high, a low estimate can result in * devices not showing up correctly on first reference. The call to * ndi_busop_bus_config needs a timeout value large enough so that * the map sync call further down is not a noop (i.e. done against * an empty map when something is infact plugged in). With * BUS_CONFIG_ONE, the call to ndi_busop_bus_config will return as * soon as the desired device is enumerated via hotplug - so we are * not committed to waiting the entire time. * * We are typically outside the window, so timeout is 0. */ sync_usec = tgtmap->tgtmap_create_csync_usec; if (tgtmap->tgtmap_create_window) { tsa = ddi_get_lbolt64() - tgtmap->tgtmap_create_time; if (tsa < drv_usectohz(sync_usec)) { tsa = drv_usectohz(sync_usec) - tsa; ret = ndi_busop_bus_config(self, flags, op, arg, childp, (clock_t)tsa); } else tsa = 0; /* passed window */ /* First one out closes the window. */ tgtmap->tgtmap_create_window = 0; } else if (op == BUS_CONFIG_ONE) ret = ndi_busop_bus_config(self, flags, op, arg, childp, 0); /* Return if doing a BUS_CONFIG_ONE and we found what we want. */ if ((op == BUS_CONFIG_ONE) && (ret == NDI_SUCCESS)) goto out; /* performance path */ /* * We sync if we were in the window, on the first bus_config_one, and * every bus_config_all (or bus_config_driver). */ if (tsa || (tgtmap->tgtmap_sync_cnt == 0) || (op != BUS_CONFIG_ONE)) { /* * Sync current observations in the map and look again. We * place an upper bound on the amount of time we will wait for * sync to complete to avoid a bad device causing this * busconfig operation to hang. * * We are typically stable, so damap_sync returns immediately. * * Max time to wait for sync is settle_usec per possible device. */ tgtmap->tgtmap_sync_cnt++; maxdev = damap_size(tgtmap->tgtmap_dam[SCSI_TGT_SCSI_DEVICE]); maxdev = (maxdev > scsi_hba_map_settle_f) ? maxdev : scsi_hba_map_settle_f; sync_usec = maxdev * tgtmap->tgtmap_settle_usec; synced = scsi_tgtmap_sync((scsi_hba_tgtmap_t *)tgtmap, sync_usec); if (!synced) SCSI_HBA_LOG((_LOGCFG, self, NULL, "tgtmap_sync timeout")); } else synced = -1; if (op == BUS_CONFIG_ONE) ret = scsi_hba_bus_configone(self, flags, arg, childp); else ret = ndi_busop_bus_config(self, flags, op, arg, childp, 0); out: #ifdef DEBUG if (ret != NDI_SUCCESS) { if (scsi_hba_bus_config_failure_msg || scsi_hba_bus_config_failure_dbg) { scsi_hba_bus_config_failure_msg--; printf("%s%d: bus_config_tgtmap %p failure on %s: " "%d %d\n", ddi_driver_name(self), ddi_get_instance(self), (void *)tgtmap, (op == BUS_CONFIG_ONE) ? (char *)arg : "ALL", (int)tsa, synced); } if (scsi_hba_bus_config_failure_dbg) { scsi_hba_bus_config_failure_dbg--; debug_enter("config_tgtmap failure"); } } else if (scsi_hba_bus_config_success_msg || scsi_hba_bus_config_success_dbg) { scsi_hba_bus_config_success_msg--; printf("%s%d: bus_config_tgtmap %p success on %s: %d %d\n", ddi_driver_name(self), ddi_get_instance(self), (void *)tgtmap, (op == BUS_CONFIG_ONE) ? (char *)arg : "ALL", (int)tsa, synced); if (scsi_hba_bus_config_success_dbg) { scsi_hba_bus_config_success_dbg--; debug_enter("config_tgtmap success"); } } #endif /* DEBUG */ return (ret); } static int scsi_hba_bus_unconfig_tgtmap(dev_info_t *self, uint_t flags, ddi_bus_config_op_t op, void *arg) { int ret = NDI_FAILURE; switch (op) { case BUS_UNCONFIG_ONE: case BUS_UNCONFIG_DRIVER: case BUS_UNCONFIG_ALL: ret = NDI_SUCCESS; break; default: break; } if (ret == NDI_SUCCESS) { flags &= ~NDI_DEVI_REMOVE; ret = ndi_busop_bus_unconfig(self, flags, op, arg); } return (ret); } static int scsi_hba_bus_config_iportmap(dev_info_t *self, uint_t flags, ddi_bus_config_op_t op, void *arg, dev_info_t **childp) { scsi_hba_tran_t *tran; impl_scsi_iportmap_t *iportmap; dev_info_t *child; int circ; uint64_t tsa = 0; /* clock64_t */ int sync_usec; int synced; int ret = NDI_FAILURE; if ((op != BUS_CONFIG_ONE) && (op != BUS_CONFIG_ALL) && (op != BUS_CONFIG_DRIVER)) goto out; tran = ndi_flavorv_get(self, SCSA_FLAVOR_SCSI_DEVICE); iportmap = (impl_scsi_iportmap_t *)tran->tran_iportmap; ASSERT(iportmap); /* * MPXIO is never a sure thing (and we have mixed children), so * set NDI_NDI_FALLBACK so that ndi_busop_bus_config will * search for both devinfo and pathinfo children. * * Future: Remove NDI_MDI_FALLBACK since devcfg.c now looks for * devinfo/pathinfo children in parallel (instead of old way of * looking for one form of child and then doing "fallback" to * look for other form of child). */ flags |= NDI_MDI_FALLBACK; /* devinfo&pathinfo children */ /* * If bus_config occurred within the map create-to-hotplug_sync window, * we need the framework to wait for children that are physicaly * present at map create time to show up (via iportmap hotplug config). * * The duration of this window is specified by the HBA driver at * scsi_hba_iportmap_create(9F) time (during attach(9E)). Its * 'csync_usec' value is selected based on how long it takes the HBA * driver to get from map creation to initial observation for something * already plugged in. Estimate high, a low estimate can result in * devices not showing up correctly on first reference. The call to * ndi_busop_bus_config needs a timeout value large enough so that * the map sync call further down is not a noop (i.e. done against * an empty map when something is infact plugged in). With * BUS_CONFIG_ONE, the call to ndi_busop_bus_config will return as * soon as the desired device is enumerated via hotplug - so we are * not committed to waiting the entire time. * * We are typically outside the window, so timeout is 0. */ sync_usec = iportmap->iportmap_create_csync_usec; if (iportmap->iportmap_create_window) { tsa = ddi_get_lbolt64() - iportmap->iportmap_create_time; if (tsa < drv_usectohz(sync_usec)) { tsa = drv_usectohz(sync_usec) - tsa; ret = ndi_busop_bus_config(self, flags, op, arg, childp, (clock_t)tsa); } else tsa = 0; /* passed window */ /* First one out closes the window. */ iportmap->iportmap_create_window = 0; } else if (op == BUS_CONFIG_ONE) ret = ndi_busop_bus_config(self, flags, op, arg, childp, 0); /* Return if doing a BUS_CONFIG_ONE and we found what we want. */ if ((op == BUS_CONFIG_ONE) && (ret == NDI_SUCCESS)) goto out; /* performance path */ /* * We sync if we were in the window, on the first bus_config_one, and * every bus_config_all (or bus_config_driver). */ if (tsa || (iportmap->iportmap_sync_cnt == 0) || (op != BUS_CONFIG_ONE)) { /* * Sync current observations in the map and look again. We * place an upper bound on the amount of time we will wait for * sync to complete to avoid a bad device causing this * busconfig operation to hang. * * We are typically stable, so damap_sync returns immediately. * * Max time to wait for sync is settle_usec times settle factor. */ iportmap->iportmap_sync_cnt++; synced = damap_sync(iportmap->iportmap_dam, sync_usec); if (!synced) SCSI_HBA_LOG((_LOGCFG, self, NULL, "iportmap_sync timeout")); } else synced = -1; if (op == BUS_CONFIG_ONE) { /* create the iport node child */ scsi_hba_devi_enter(self, &circ); if ((child = scsi_hba_bus_config_port(self, (char *)arg, SE_BUSCONFIG)) != NULL) { if (childp) { ndi_hold_devi(child); *childp = child; } ret = NDI_SUCCESS; } scsi_hba_devi_exit(self, circ); } else ret = ndi_busop_bus_config(self, flags, op, arg, childp, 0); out: #ifdef DEBUG if (ret != NDI_SUCCESS) { if (scsi_hba_bus_config_failure_msg || scsi_hba_bus_config_failure_dbg) { scsi_hba_bus_config_failure_msg--; printf("%s%d: bus_config_iportmap %p failure on %s: " "%d %d\n", ddi_driver_name(self), ddi_get_instance(self), (void *)iportmap, (op == BUS_CONFIG_ONE) ? (char *)arg : "ALL", (int)tsa, synced); } if (scsi_hba_bus_config_failure_dbg) { scsi_hba_bus_config_failure_dbg--; debug_enter("config_iportmap failure"); } } else if (scsi_hba_bus_config_success_msg || scsi_hba_bus_config_success_dbg) { scsi_hba_bus_config_success_msg--; printf("%s%d: bus_config_iportmap %p success on %s: %d %d\n", ddi_driver_name(self), ddi_get_instance(self), (void *)iportmap, (op == BUS_CONFIG_ONE) ? (char *)arg : "ALL", (int)tsa, synced); if (scsi_hba_bus_config_success_dbg) { scsi_hba_bus_config_success_dbg--; debug_enter("config_iportmap success"); } } #endif /* DEBUG */ return (ret); } static int scsi_hba_bus_unconfig_iportmap(dev_info_t *self, uint_t flags, ddi_bus_config_op_t op, void *arg) { flags &= ~NDI_DEVI_REMOVE; return (ndi_busop_bus_unconfig(self, flags, op, arg)); } /* * SCSI HBA bus config enumeration entry point. Called via the bus_ops * bus_config entry point for all SCSA HBA drivers. * * o If an HBA implements its own bus_config via tran_bus_config then we * invoke it. An HBA that implements its own tran_bus_config entry point * may still call back into common SCSA code bus_config code for: * * o SPI bus_config (scsi_hba_bus_spi) * o LUN and secondary function enumeration (scsi_hba_enum_lsf_of_t()). * o configuration of a specific device (scsi_device_config). * o determining 1275 SCSI nodename and compatible property * (scsi_hba_nodename_compatible_get/_free). * * o Otherwise we implement a SCSI parallel interface (spi) bus config. * * Return NDI_SUCCESS if we might have created a new node. * Return NDI_FAILURE if we definitely did not create a new node. */ static int scsi_hba_bus_config(dev_info_t *self, uint_t flags, ddi_bus_config_op_t op, void *arg, dev_info_t **childp) { scsi_hba_tran_t *tran; int ret; /* make sure that we will not disappear */ ASSERT(DEVI(self)->devi_ref); tran = ndi_flavorv_get(self, SCSA_FLAVOR_SCSI_DEVICE); if (tran == NULL) { /* NULL tran driver.conf config (used by cmdk). */ if ((op == BUS_CONFIG_ONE) || (flags & NDI_DRV_CONF_REPROBE)) flags |= NDI_CONFIG_REPROBE; return (ndi_busop_bus_config(self, flags, op, arg, childp, 0)); } /* Check if self is HBA-only node. */ if (tran->tran_hba_flags & SCSI_HBA_HBA) { /* The bus_config request is to configure iports below HBA. */ #ifdef sparc /* * Sparc's 'boot-device' OBP property value lacks an /iport@X/ * component. Prior to the mount of root, we drive a disk@ * BUS_CONFIG_ONE operatino down a level to resolve an * OBP 'boot-device' path. * * Future: Add (modrootloaded == 0) below, and insure that * all attempts bus_conf of 'bo_name' (in OBP form) occur * prior to 'modrootloaded = 1;' assignment in vfs_mountroot. */ if ((op == BUS_CONFIG_ONE) && (strncmp((char *)arg, "disk@", strlen("disk@")) == 0)) { return (scsi_hba_bus_config_prom_node(self, flags, arg, childp)); } #endif /* sparc */ if (tran->tran_iportmap) { /* config based on scsi_hba_iportmap API */ ret = scsi_hba_bus_config_iportmap(self, flags, op, arg, childp); } else { /* config based on 'iport_register' API */ ret = scsi_hba_bus_config_iports(self, flags, op, arg, childp); } return (ret); } /* Check to see how the iport/HBA does target/lun bus config. */ if (tran->tran_bus_config) { /* HBA config based on Sun-private/legacy tran_bus_config */ ret = tran->tran_bus_config(self, flags, op, arg, childp); } else if (tran->tran_tgtmap) { /* SCSAv3 config based on scsi_hba_tgtmap_*() API */ ret = scsi_hba_bus_config_tgtmap(self, flags, op, arg, childp); } else { /* SCSA config based on SCSI Parallel Interconnect */ ret = scsi_hba_bus_config_spi(self, flags, op, arg, childp); } return (ret); } /* * Called via the bus_ops bus_unconfig entry point for SCSI HBA drivers. */ static int scsi_hba_bus_unconfig(dev_info_t *self, uint_t flags, ddi_bus_config_op_t op, void *arg) { int circ; scsi_hba_tran_t *tran; int ret; tran = ddi_get_driver_private(self); if (tran == NULL) { /* NULL tran driver.conf unconfig (used by cmdk). */ return (ndi_busop_bus_unconfig(self, flags, op, arg)); } /* * Purge barrier/probe node children. We do this prior to * tran_bus_unconfig in case the unconfig implementation calls back * into the common code at a different enumeration level, such a * scsi_device_config, which still creates barrier/probe nodes. */ scsi_hba_devi_enter(self, &circ); scsi_hba_barrier_purge(self); scsi_hba_devi_exit(self, circ); /* DEBUG: for testing, allow bus_unconfig do drive removal. */ if (scsi_hba_bus_unconfig_remove) flags |= NDI_DEVI_REMOVE; /* Check if self is HBA-only node. */ if (tran->tran_hba_flags & SCSI_HBA_HBA) { /* The bus_config request is to unconfigure iports below HBA. */ if (tran->tran_iportmap) { /* SCSAv3 unconfig based on scsi_hba_iportmap API */ ret = scsi_hba_bus_unconfig_iportmap(self, flags, op, arg); } else if (tran->tran_bus_unconfig) { /* HBA unconfig based on Sun-private/legacy API */ ret = tran->tran_bus_unconfig(self, flags, op, arg); } else { /* Standard framework unconfig. */ ret = ndi_busop_bus_unconfig(self, flags, op, arg); } return (ret); } /* Check to see how the iport/HBA does target/lun bus unconfig. */ if (tran->tran_bus_unconfig) { /* HBA unconfig based on Sun-private/legacy tran_bus_unconfig */ ret = tran->tran_bus_unconfig(self, flags, op, arg); } else if (tran->tran_tgtmap) { /* SCSAv3 unconfig based on scsi_hba_tgtmap_*() API */ ret = scsi_hba_bus_unconfig_tgtmap(self, flags, op, arg); } else { /* SCSA unconfig based on SCSI Parallel Interconnect */ ret = scsi_hba_bus_unconfig_spi(self, flags, op, arg); } return (ret); } static int scsi_tgtmap_scsi_config(void *arg, damap_t *mapp, damap_id_t tgtid) { scsi_hba_tran_t *tran = (scsi_hba_tran_t *)arg; dev_info_t *self = tran->tran_iport_dip; impl_scsi_tgtmap_t *tgtmap; char *tgtaddr; int cfg_status, mt; tgtmap = (impl_scsi_tgtmap_t *)tran->tran_tgtmap; tgtaddr = damap_id2addr(mapp, tgtid); if (scsi_lunmap_create(self, tgtmap, tgtaddr) != DDI_SUCCESS) { SCSI_HBA_LOG((_LOG_NF(WARN), "failed to create lunmap for %s", tgtaddr)); } mt = ddi_prop_get_int(DDI_DEV_T_ANY, self, DDI_PROP_NOTPROM | DDI_PROP_DONTPASS, "scsi-enumeration", scsi_enumeration); mt |= scsi_hba_log_mt_disable; cfg_status = scsi_hba_bus_config_taddr(self, tgtaddr, mt, SE_HP); if (cfg_status != NDI_SUCCESS) { SCSI_HBA_LOG((_LOGCFG, self, NULL, "%s @%s config status %d", damap_name(mapp), tgtaddr, cfg_status)); scsi_lunmap_destroy(self, tgtmap, tgtaddr); return (DAM_FAILURE); } return (DAM_SUCCESS); } static int scsi_tgtmap_scsi_unconfig(void *arg, damap_t *mapp, damap_id_t tgtid) { scsi_hba_tran_t *tran = (scsi_hba_tran_t *)arg; dev_info_t *self = tran->tran_iport_dip; impl_scsi_tgtmap_t *tgtmap; char *tgt_addr; tgtmap = (impl_scsi_tgtmap_t *)tran->tran_tgtmap; tgt_addr = damap_id2addr(mapp, tgtid); SCSI_HBA_LOG((_LOGUNCFG, self, NULL, "%s @%s", damap_name(mapp), tgt_addr)); scsi_lunmap_destroy(self, tgtmap, tgt_addr); return (DAM_SUCCESS); } static int scsi_tgtmap_smp_config(void *arg, damap_t *mapp, damap_id_t tgtid) { scsi_hba_tran_t *tran = (scsi_hba_tran_t *)arg; dev_info_t *self = tran->tran_iport_dip; char *addr; addr = damap_id2addr(mapp, tgtid); SCSI_HBA_LOG((_LOGCFG, self, NULL, "%s @%s", damap_name(mapp), addr)); return ((smp_hba_bus_config_taddr(self, addr) == NDI_SUCCESS) ? DAM_SUCCESS : DAM_FAILURE); } static int scsi_tgtmap_smp_unconfig(void *arg, damap_t *mapp, damap_id_t tgtid) { scsi_hba_tran_t *tran = (scsi_hba_tran_t *)arg; dev_info_t *self = tran->tran_iport_dip; char *addr; dev_info_t *child; char nameaddr[SCSI_MAXNAMELEN]; int circ; addr = damap_id2addr(mapp, tgtid); SCSI_HBA_LOG((_LOGUNCFG, self, NULL, "%s @%s", damap_name(mapp), addr)); (void) snprintf(nameaddr, sizeof (nameaddr), "smp@%s", addr); scsi_hba_devi_enter(self, &circ); if ((child = ndi_devi_findchild(self, nameaddr)) == NULL) { scsi_hba_devi_exit(self, circ); return (DAM_SUCCESS); } if (ndi_devi_offline(child, NDI_DEVFS_CLEAN | NDI_DEVI_REMOVE) == DDI_SUCCESS) { SCSI_HBA_LOG((_LOGUNCFG, self, NULL, "devinfo smp@%s offlined and removed", addr)); } else if (ndi_devi_device_remove(child)) { /* Offline/remove failed, note new device_remove */ SCSI_HBA_LOG((_LOGUNCFG, self, NULL, "devinfo smp@%s offline failed, device_remove", addr)); } scsi_hba_devi_exit(self, circ); return (DAM_SUCCESS); } /* ARGSUSED1 */ static void scsi_tgtmap_smp_activate(void *map_priv, char *tgt_addr, int addrid, void **tgt_privp) { impl_scsi_tgtmap_t *tgtmap = (impl_scsi_tgtmap_t *)map_priv; dev_info_t *self = tgtmap->tgtmap_tran->tran_iport_dip; if (tgtmap->tgtmap_activate_cb) { SCSI_HBA_LOG((_LOGTGT, self, NULL, "%s @%s activated", damap_name(tgtmap->tgtmap_dam[SCSI_TGT_SMP_DEVICE]), tgt_addr)); (*tgtmap->tgtmap_activate_cb)(tgtmap->tgtmap_mappriv, tgt_addr, SCSI_TGT_SMP_DEVICE, tgt_privp); } } /* ARGSUSED1 */ static void scsi_tgtmap_smp_deactivate(void *map_priv, char *tgt_addr, int addrid, void *tgt_privp, damap_deact_rsn_t damap_rsn) { impl_scsi_tgtmap_t *tgtmap = (impl_scsi_tgtmap_t *)map_priv; dev_info_t *self = tgtmap->tgtmap_tran->tran_iport_dip; boolean_t tgtmap_rereport; scsi_tgtmap_deact_rsn_t tgtmap_rsn; if (tgtmap->tgtmap_deactivate_cb) { SCSI_HBA_LOG((_LOGTGT, self, NULL, "%s @%s deactivated %d", damap_name(tgtmap->tgtmap_dam[SCSI_TGT_SMP_DEVICE]), tgt_addr, damap_rsn)); if (damap_rsn == DAMAP_DEACT_RSN_GONE) tgtmap_rsn = SCSI_TGT_DEACT_RSN_GONE; else if (damap_rsn == DAMAP_DEACT_RSN_CFG_FAIL) tgtmap_rsn = SCSI_TGT_DEACT_RSN_CFG_FAIL; else if (damap_rsn == DAMAP_DEACT_RSN_UNSTBL) tgtmap_rsn = SCSI_TGT_DEACT_RSN_UNSTBL; else { SCSI_HBA_LOG((_LOG(WARN), self, NULL, "%s @%s deactivated with unknown rsn", damap_name(tgtmap->tgtmap_dam[SCSI_TGT_SMP_DEVICE]), tgt_addr)); return; } tgtmap_rereport = (*tgtmap->tgtmap_deactivate_cb) (tgtmap->tgtmap_mappriv, tgt_addr, SCSI_TGT_SMP_DEVICE, tgt_privp, tgtmap_rsn); if ((tgtmap_rsn == SCSI_TGT_DEACT_RSN_CFG_FAIL) && (tgtmap_rereport == B_FALSE)) { SCSI_HBA_LOG((_LOG(WARN), NULL, self, "%s enumeration failed, no more retries until " "config change occurs", tgt_addr)); } } } /* ARGSUSED1 */ static void scsi_tgtmap_scsi_activate(void *map_priv, char *tgt_addr, int addrid, void **tgt_privp) { impl_scsi_tgtmap_t *tgtmap = (impl_scsi_tgtmap_t *)map_priv; dev_info_t *self = tgtmap->tgtmap_tran->tran_iport_dip; if (tgtmap->tgtmap_activate_cb) { SCSI_HBA_LOG((_LOGTGT, self, NULL, "%s @%s activated", damap_name(tgtmap->tgtmap_dam[SCSI_TGT_SCSI_DEVICE]), tgt_addr)); (*tgtmap->tgtmap_activate_cb)(tgtmap->tgtmap_mappriv, tgt_addr, SCSI_TGT_SCSI_DEVICE, tgt_privp); } } /* ARGSUSED1 */ static void scsi_tgtmap_scsi_deactivate(void *map_priv, char *tgt_addr, int addrid, void *tgt_privp, damap_deact_rsn_t damap_rsn) { impl_scsi_tgtmap_t *tgtmap = (impl_scsi_tgtmap_t *)map_priv; dev_info_t *self = tgtmap->tgtmap_tran->tran_iport_dip; boolean_t tgtmap_rereport; scsi_tgtmap_deact_rsn_t tgtmap_rsn; if (tgtmap->tgtmap_deactivate_cb) { SCSI_HBA_LOG((_LOGTGT, self, NULL, "%s @%s deactivated %d", damap_name(tgtmap->tgtmap_dam[SCSI_TGT_SCSI_DEVICE]), tgt_addr, damap_rsn)); if (damap_rsn == DAMAP_DEACT_RSN_GONE) tgtmap_rsn = SCSI_TGT_DEACT_RSN_GONE; else if (damap_rsn == DAMAP_DEACT_RSN_CFG_FAIL) tgtmap_rsn = SCSI_TGT_DEACT_RSN_CFG_FAIL; else if (damap_rsn == DAMAP_DEACT_RSN_UNSTBL) tgtmap_rsn = SCSI_TGT_DEACT_RSN_UNSTBL; else { SCSI_HBA_LOG((_LOG(WARN), self, NULL, "%s @%s deactivated with unknown rsn", damap_name( tgtmap->tgtmap_dam[SCSI_TGT_SCSI_DEVICE]), tgt_addr)); return; } tgtmap_rereport = (*tgtmap->tgtmap_deactivate_cb) (tgtmap->tgtmap_mappriv, tgt_addr, SCSI_TGT_SCSI_DEVICE, tgt_privp, tgtmap_rsn); if ((tgtmap_rsn == SCSI_TGT_DEACT_RSN_CFG_FAIL) && (tgtmap_rereport == B_FALSE)) { SCSI_HBA_LOG((_LOG(WARN), NULL, self, "%s enumeration failed, no more retries until " "config change occurs", tgt_addr)); } } } int scsi_hba_tgtmap_create(dev_info_t *self, scsi_tgtmap_mode_t mode, int csync_usec, int settle_usec, void *tgtmap_priv, scsi_tgt_activate_cb_t activate_cb, scsi_tgt_deactivate_cb_t deactivate_cb, scsi_hba_tgtmap_t **handle) { scsi_hba_tran_t *tran; damap_t *mapp; char context[64]; impl_scsi_tgtmap_t *tgtmap; damap_rptmode_t rpt_style; char *scsi_binding_set; int optflags; if (self == NULL || csync_usec == 0 || settle_usec == 0 || handle == NULL) return (DDI_FAILURE); *handle = NULL; if (scsi_hba_iport_unit_address(self) == NULL) return (DDI_FAILURE); switch (mode) { case SCSI_TM_FULLSET: rpt_style = DAMAP_REPORT_FULLSET; break; case SCSI_TM_PERADDR: rpt_style = DAMAP_REPORT_PERADDR; break; default: return (DDI_FAILURE); } tran = (scsi_hba_tran_t *)ddi_get_driver_private(self); ASSERT(tran); if (tran == NULL) return (DDI_FAILURE); tgtmap = kmem_zalloc(sizeof (*tgtmap), KM_SLEEP); tgtmap->tgtmap_tran = tran; tgtmap->tgtmap_activate_cb = activate_cb; tgtmap->tgtmap_deactivate_cb = deactivate_cb; tgtmap->tgtmap_mappriv = tgtmap_priv; tgtmap->tgtmap_create_window = 1; /* start with window */ tgtmap->tgtmap_create_time = ddi_get_lbolt64(); tgtmap->tgtmap_create_csync_usec = csync_usec; tgtmap->tgtmap_settle_usec = settle_usec; tgtmap->tgtmap_sync_cnt = 0; optflags = (ddi_prop_get_int(DDI_DEV_T_ANY, self, DDI_PROP_NOTPROM | DDI_PROP_DONTPASS, "scsi-enumeration", scsi_enumeration) & SCSI_ENUMERATION_MT_TARGET_DISABLE) ? DAMAP_SERIALCONFIG : DAMAP_MTCONFIG; (void) snprintf(context, sizeof (context), "%s%d.tgtmap.scsi", ddi_driver_name(self), ddi_get_instance(self)); SCSI_HBA_LOG((_LOGTGT, self, NULL, "%s", context)); if (damap_create(context, rpt_style, optflags, settle_usec, tgtmap, scsi_tgtmap_scsi_activate, scsi_tgtmap_scsi_deactivate, tran, scsi_tgtmap_scsi_config, scsi_tgtmap_scsi_unconfig, &mapp) != DAM_SUCCESS) { kmem_free(tgtmap, sizeof (*tgtmap)); return (DDI_FAILURE); } tgtmap->tgtmap_dam[SCSI_TGT_SCSI_DEVICE] = mapp; (void) snprintf(context, sizeof (context), "%s%d.tgtmap.smp", ddi_driver_name(self), ddi_get_instance(self)); SCSI_HBA_LOG((_LOGTGT, self, NULL, "%s", context)); if (damap_create(context, rpt_style, optflags, settle_usec, tgtmap, scsi_tgtmap_smp_activate, scsi_tgtmap_smp_deactivate, tran, scsi_tgtmap_smp_config, scsi_tgtmap_smp_unconfig, &mapp) != DAM_SUCCESS) { damap_destroy(tgtmap->tgtmap_dam[SCSI_TGT_SCSI_DEVICE]); kmem_free(tgtmap, sizeof (*tgtmap)); return (DDI_FAILURE); } tgtmap->tgtmap_dam[SCSI_TGT_SMP_DEVICE] = mapp; tran->tran_tgtmap = (scsi_hba_tgtmap_t *)tgtmap; *handle = (scsi_hba_tgtmap_t *)tgtmap; /* * We have now set tran_tgtmap, marking the tran as using tgtmap * enumeration services. To prevent the generation of legacy spi * 'binding-set' compatible forms, remove the 'scsi-binding-set' * property. */ if (ddi_prop_lookup_string(DDI_DEV_T_ANY, self, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "scsi-binding-set", &scsi_binding_set) == DDI_PROP_SUCCESS) { if (strcmp(scsi_binding_set, scsi_binding_set_spi) == 0) (void) ndi_prop_remove(DDI_DEV_T_NONE, self, "scsi-binding-set"); ddi_prop_free(scsi_binding_set); } return (DDI_SUCCESS); } void scsi_hba_tgtmap_destroy(scsi_hba_tgtmap_t *handle) { impl_scsi_tgtmap_t *tgtmap = (impl_scsi_tgtmap_t *)handle; dev_info_t *self = tgtmap->tgtmap_tran->tran_iport_dip; int i; for (i = 0; i < SCSI_TGT_NTYPES; i++) { if (tgtmap->tgtmap_dam[i]) { SCSI_HBA_LOG((_LOGTGT, self, NULL, "%s", damap_name(tgtmap->tgtmap_dam[i]))); damap_destroy(tgtmap->tgtmap_dam[i]); } } kmem_free(tgtmap, sizeof (*tgtmap)); } /* return 1 if all maps ended up syned */ static int scsi_tgtmap_sync(scsi_hba_tgtmap_t *handle, int sync_usec) { impl_scsi_tgtmap_t *tgtmap = (impl_scsi_tgtmap_t *)handle; dev_info_t *self = tgtmap->tgtmap_tran->tran_iport_dip; int all_synced = 1; int synced; int i; for (i = 0; i < SCSI_TGT_NTYPES; i++) { if (tgtmap->tgtmap_dam[i]) { SCSI_HBA_LOG((_LOGTGT, self, NULL, "%s sync begin", damap_name(tgtmap->tgtmap_dam[i]))); synced = damap_sync(tgtmap->tgtmap_dam[i], sync_usec); all_synced &= synced; SCSI_HBA_LOG((_LOGTGT, self, NULL, "%s sync end %d", damap_name(tgtmap->tgtmap_dam[i]), synced)); } } return (all_synced); } /* return 1 if all maps ended up empty */ static int scsi_tgtmap_is_empty(scsi_hba_tgtmap_t *handle) { impl_scsi_tgtmap_t *tgtmap = (impl_scsi_tgtmap_t *)handle; dev_info_t *self = tgtmap->tgtmap_tran->tran_iport_dip; int all_empty = 1; int empty; int i; for (i = 0; i < SCSI_TGT_NTYPES; i++) { if (tgtmap->tgtmap_dam[i]) { empty = damap_is_empty(tgtmap->tgtmap_dam[i]); all_empty &= empty; SCSI_HBA_LOG((_LOGTGT, self, NULL, "%s is_empty %d", damap_name(tgtmap->tgtmap_dam[i]), empty)); } } return (all_empty); } static int scsi_tgtmap_beginf(scsi_hba_tgtmap_t *handle, boolean_t do_begin) { impl_scsi_tgtmap_t *tgtmap = (impl_scsi_tgtmap_t *)handle; dev_info_t *self = tgtmap->tgtmap_tran->tran_iport_dip; char *context; int rv = DAM_SUCCESS; int i; for (i = 0; i < SCSI_TGT_NTYPES; i++) { if (tgtmap->tgtmap_dam[i] == NULL) { continue; } context = damap_name(tgtmap->tgtmap_dam[i]); if (do_begin == B_TRUE) { if (i == SCSI_TGT_SCSI_DEVICE) { /* * In scsi_device context, so we have the * 'context' string, diagnose the case where * the tgtmap caller is failing to make * forward progress, i.e. the caller is never * completing an observation by calling * scsi_hbg_tgtmap_set_end. If this occurs, * the solaris target/lun state may be out * of sync with hardware. */ if (tgtmap->tgtmap_reports++ >= scsi_hba_tgtmap_reports_max) { tgtmap->tgtmap_noisy++; if (tgtmap->tgtmap_noisy == 1) { SCSI_HBA_LOG((_LOG(WARN), self, NULL, "%s: failing tgtmap begin", context)); } } } rv = damap_addrset_begin(tgtmap->tgtmap_dam[i]); } else { rv = damap_addrset_flush(tgtmap->tgtmap_dam[i]); } if (rv != DAM_SUCCESS) { SCSI_HBA_LOG((_LOGTGT, self, NULL, "%s FAIL", context)); } else { SCSI_HBA_LOG((_LOGTGT, self, NULL, "%s", context)); } } return ((rv == DAM_SUCCESS) ? DDI_SUCCESS : DDI_FAILURE); } int scsi_hba_tgtmap_set_begin(scsi_hba_tgtmap_t *handle) { return (scsi_tgtmap_beginf(handle, B_TRUE)); } int scsi_hba_tgtmap_set_flush(scsi_hba_tgtmap_t *handle) { return (scsi_tgtmap_beginf(handle, B_FALSE)); } int scsi_hba_tgtmap_set_add(scsi_hba_tgtmap_t *handle, scsi_tgtmap_tgt_type_t tgt_type, char *tgt_addr, void *tgt_priv) { impl_scsi_tgtmap_t *tgtmap = (impl_scsi_tgtmap_t *)handle; dev_info_t *self = tgtmap->tgtmap_tran->tran_iport_dip; if (tgt_type >= SCSI_TGT_NTYPES || !tgtmap->tgtmap_dam[tgt_type]) return (DDI_FAILURE); SCSI_HBA_LOG((_LOGTGT, self, NULL, "%s @%s", damap_name(tgtmap->tgtmap_dam[tgt_type]), tgt_addr)); return ((damap_addrset_add(tgtmap->tgtmap_dam[tgt_type], tgt_addr, NULL, NULL, tgt_priv) == DAM_SUCCESS) ? DDI_SUCCESS : DDI_FAILURE); } /*ARGSUSED*/ int scsi_hba_tgtmap_set_end(scsi_hba_tgtmap_t *handle, uint_t flags) { impl_scsi_tgtmap_t *tgtmap = (impl_scsi_tgtmap_t *)handle; dev_info_t *self = tgtmap->tgtmap_tran->tran_iport_dip; char *context; int rv = DDI_SUCCESS; int i; tgtmap->tgtmap_reports = tgtmap->tgtmap_noisy = 0; for (i = 0; i < SCSI_TGT_NTYPES; i++) { if (tgtmap->tgtmap_dam[i] == NULL) continue; context = damap_name(tgtmap->tgtmap_dam[i]); if (damap_addrset_end( tgtmap->tgtmap_dam[i], 0) != DAM_SUCCESS) { SCSI_HBA_LOG((_LOGTGT, self, NULL, "%s FAIL", context)); rv = DDI_FAILURE; continue; } SCSI_HBA_LOG((_LOGTGT, self, NULL, "%s", context)); } return (rv); } int scsi_hba_tgtmap_tgt_add(scsi_hba_tgtmap_t *handle, scsi_tgtmap_tgt_type_t tgt_type, char *tgt_addr, void *tgt_priv) { impl_scsi_tgtmap_t *tgtmap = (impl_scsi_tgtmap_t *)handle; dev_info_t *self = tgtmap->tgtmap_tran->tran_iport_dip; if (tgt_type >= SCSI_TGT_NTYPES || !tgtmap->tgtmap_dam[tgt_type]) return (DDI_FAILURE); SCSI_HBA_LOG((_LOGTGT, self, NULL, "%s @%s", damap_name(tgtmap->tgtmap_dam[tgt_type]), tgt_addr)); return ((damap_addr_add(tgtmap->tgtmap_dam[tgt_type], tgt_addr, NULL, NULL, tgt_priv) == DAM_SUCCESS) ? DDI_SUCCESS : DDI_FAILURE); } int scsi_hba_tgtmap_tgt_remove(scsi_hba_tgtmap_t *handle, scsi_tgtmap_tgt_type_t tgt_type, char *tgt_addr) { impl_scsi_tgtmap_t *tgtmap = (impl_scsi_tgtmap_t *)handle; dev_info_t *self = tgtmap->tgtmap_tran->tran_iport_dip; if (tgt_type >= SCSI_TGT_NTYPES || !tgtmap->tgtmap_dam[tgt_type]) return (DDI_FAILURE); SCSI_HBA_LOG((_LOGTGT, self, NULL, "%s @%s", damap_name(tgtmap->tgtmap_dam[tgt_type]), tgt_addr)); return ((damap_addr_del(tgtmap->tgtmap_dam[tgt_type], tgt_addr) == DAM_SUCCESS) ? DDI_SUCCESS : DDI_FAILURE); } int scsi_hba_tgtmap_lookup(scsi_hba_tgtmap_t *handle, char *tgt_addr, scsi_tgtmap_tgt_type_t *r_type) { impl_scsi_tgtmap_t *tgtmap = (impl_scsi_tgtmap_t *)handle; dev_info_t *self = tgtmap->tgtmap_tran->tran_iport_dip; damap_id_t tgtid; int i; for (i = 0; i < SCSI_TGT_NTYPES; i++) { tgtid = damap_lookup(tgtmap->tgtmap_dam[i], tgt_addr); if (tgtid != NODAM) { *r_type = i; SCSI_HBA_LOG((_LOG(3), self, NULL, "%s @%s found: type %d", damap_name(tgtmap->tgtmap_dam[i]), tgt_addr, i)); damap_id_rele(tgtmap->tgtmap_dam[i], tgtid); return (DDI_SUCCESS); } } SCSI_HBA_LOG((_LOG(3), self, NULL, "%s%d.tgtmap @%s not found", ddi_driver_name(self), ddi_get_instance(self), tgt_addr)); return (DDI_FAILURE); } /* * Return the unit-address of an 'iport' node, or NULL for non-iport node. */ char * scsi_hba_iport_unit_address(dev_info_t *self) { /* * NOTE: Since 'self' could be a SCSA iport node or a SCSA HBA node, * we can't use SCSA flavors: the flavor of a SCSA HBA node is not * established/owned by SCSA, it is established by the nexus that * created the SCSA HBA node (PCI) as a child. * * NOTE: If we want to support a node_name other than "iport" for * an iport node then we can add support for a "scsa-iport-node-name" * property on the SCSA HBA node. A SCSA HBA driver would set this * property on the SCSA HBA node prior to using the iport API. */ if (strcmp(ddi_node_name(self), "iport") == 0) return (ddi_get_name_addr(self)); else return (NULL); } /* * Define a SCSI initiator port (bus/channel) for an HBA card that needs to * support multiple SCSI ports, but only has a single HBA devinfo node. This * function should be called from the HBA's attach(9E) implementation (when * processing the HBA devinfo node attach) after the number of SCSI ports on * the card is known or when the HBA driver DR handler detects a new port. * The function returns 0 on failure and 1 on success. * * The implementation will add the port value into the "scsi-iports" property * value maintained on the HBA node as. These properties are used by the generic * scsi bus_config implementation to dynamicaly enumerate the specified iport * children. The enumeration code will, on demand, create the appropriate * iport children with a SCSI_ADDR_PROP_IPORTUA unit address. This node will * bind to the same driver as the HBA node itself. This means that an HBA * driver that uses iports should expect probe(9E), attach(9E), and detach(9E) * calls on the iport children of the HBA. If configuration for all ports was * already done during HBA node attach, the driver should just return * DDI_SUCCESS when confronted with an iport node. * * A maximum of 32 iport ports are supported per HBA devinfo node. * * A NULL "port" can be used to indicate that the framework should enumerate * target children on the HBA node itself, in addition to enumerating target * children on any iport nodes declared. There are two reasons that an HBA may * wish to have target children enumerated on both the HBA node and iport * node(s): * * o If, in the past, HBA hardware had only a single physical port but now * supports multiple physical ports, the updated driver that supports * multiple physical ports may want to avoid /devices path upgrade issues * by enumerating the first physical port under the HBA instead of as a * iport. * * o Some hardware RAID HBA controllers (mlx, chs, etc) support multiple * SCSI physical ports configured so that various physical devices on * the physical ports are amalgamated into virtual devices on a virtual * port. Amalgamated physical devices no longer appear to the host OS * on the physical ports, but other non-amalgamated devices may still be * visible on the physical ports. These drivers use a model where the * physical ports are iport nodes and the HBA node is the virtual port to * the configured virtual devices. */ int scsi_hba_iport_register(dev_info_t *self, char *port) { unsigned int ports = 0; int rval, i; char **iports, **newiports; ASSERT(self); if (self == NULL) return (DDI_FAILURE); rval = ddi_prop_lookup_string_array(DDI_DEV_T_ANY, self, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "scsi-iports", &iports, &ports); if (ports >= SCSI_HBA_MAX_IPORTS) { ddi_prop_free(iports); return (DDI_FAILURE); } if (rval == DDI_PROP_SUCCESS) { for (i = 0; i < ports; i++) { if (strcmp(port, iports[i]) == 0) { /* iport already registered */ ddi_prop_free(iports); return (DDI_SUCCESS); } } } newiports = kmem_alloc((sizeof (char *) * (ports + 1)), KM_SLEEP); for (i = 0; i < ports; i++) { newiports[i] = strdup(iports[i]); } newiports[ports] = strdup(port); ports++; if (ddi_prop_update_string_array(DDI_DEV_T_NONE, self, "scsi-iports", newiports, ports) != DDI_PROP_SUCCESS) { SCSI_HBA_LOG((_LOG(WARN), self, NULL, "failed to establish %s %s", SCSI_ADDR_PROP_IPORTUA, port)); rval = DDI_FAILURE; } else { rval = DDI_SUCCESS; } /* If there is iport exist, free property */ if (ports > 1) ddi_prop_free(iports); for (i = 0; i < ports; i++) { strfree(newiports[i]); } kmem_free(newiports, (sizeof (char *)) * ports); return (rval); } /* * Check if the HBA has any scsi_hba_iport_register()ed children. */ int scsi_hba_iport_exist(dev_info_t *self) { unsigned int ports = 0; char **iports; int rval; rval = ddi_prop_lookup_string_array(DDI_DEV_T_ANY, self, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "scsi-iports", &iports, &ports); if (rval != DDI_PROP_SUCCESS) return (0); /* If there is now at least 1 iport, then iports is valid */ if (ports > 0) { rval = 1; } else rval = 0; ddi_prop_free(iports); return (rval); } dev_info_t * scsi_hba_iport_find(dev_info_t *self, char *portnm) { char *addr = NULL; char **iports; unsigned int num_iports = 0; int rval = DDI_FAILURE; int i = 0; dev_info_t *child = NULL; /* check to see if this is an HBA that defined scsi iports */ rval = ddi_prop_lookup_string_array(DDI_DEV_T_ANY, self, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "scsi-iports", &iports, &num_iports); if (rval != DDI_SUCCESS) { return (NULL); } ASSERT(num_iports > 0); /* check to see if this port was registered */ for (i = 0; i < num_iports; i++) { if (strcmp(iports[i], portnm) == 0) break; } if (i == num_iports) { child = NULL; goto out; } addr = kmem_zalloc(SCSI_MAXNAMELEN, KM_SLEEP); (void) snprintf(addr, SCSI_MAXNAMELEN, "iport@%s", portnm); rval = ndi_devi_config_one(self, addr, &child, NDI_NO_EVENT); kmem_free(addr, SCSI_MAXNAMELEN); if (rval != DDI_SUCCESS) { child = NULL; } out: ddi_prop_free(iports); return (child); } /* * Search/create the specified iport node */ static dev_info_t * scsi_hba_bus_config_port(dev_info_t *self, char *nameaddr, scsi_enum_t se) { dev_info_t *child; /* iport child of HBA node */ scsi_hba_tran_t *tran; char *addr; char *compat; /* * See if the iport node already exists. */ addr = nameaddr + strlen("iport@"); if (child = ndi_devi_findchild(self, nameaddr)) { if (ndi_devi_device_isremoved(child)) { if ((se == SE_HP) || !ndi_dev_is_hotplug_node(child)) { if (ndi_devi_device_insert(child)) SCSI_HBA_LOG((_LOGCFG, self, NULL, "devinfo iport@%s device_reinsert", addr)); } else return (NULL); } return (child); } /* * If config based on scsi_hba_iportmap API, only allow create * from hotplug. */ tran = ndi_flavorv_get(self, SCSA_FLAVOR_SCSI_DEVICE); ASSERT(tran); if (tran->tran_iportmap && (se != SE_HP)) return (NULL); /* allocate and initialize a new "iport" node */ ndi_devi_alloc_sleep(self, "iport", (se == SE_HP) ? DEVI_SID_HP_NODEID : DEVI_SID_NODEID, &child); ASSERT(child); /* * Set the flavor of the child to be IPORT flavored */ ndi_flavor_set(child, SCSA_FLAVOR_IPORT); /* * Add the SCSI_ADDR_PROP_IPORTUA addressing property for this child. * This property is used to identify a iport node, and to represent the * nodes @addr form via node properties. * * Add "compatible" property to the "scsi-iport" node to cause it bind * to the same driver as the HBA driver. Use the "driver" name * instead of the "binding name" to distinguish from hw node. * * Give the HBA a chance, via tran_set_name_prop, to set additional * iport node properties or to change the "compatible" binding * prior to init_child. * * NOTE: the order of these operations is important so that * scsi_hba_iport works when called. */ compat = (char *)ddi_driver_name(self); if ((ndi_prop_update_string(DDI_DEV_T_NONE, child, SCSI_ADDR_PROP_IPORTUA, addr) != DDI_PROP_SUCCESS) || (ndi_prop_update_string_array(DDI_DEV_T_NONE, child, "compatible", &compat, 1) != DDI_PROP_SUCCESS) || ddi_pathname_obp_set(child, NULL) != DDI_SUCCESS) { SCSI_HBA_LOG((_LOG_NF(WARN), "%s failed dynamic decoration", nameaddr)); (void) ddi_remove_child(child, 0); child = NULL; } else { /* * Online/attach in order to get events so devfsadm will * create public names. */ ndi_hold_devi(child); if (ndi_devi_online(child, 0) != NDI_SUCCESS) { ndi_rele_devi(child); ndi_prop_remove_all(child); (void) ndi_devi_free(child); child = NULL; } else ndi_rele_devi(child); } return (child); } #ifdef sparc /* * Future: When iportmap boot support is added, consider rewriting this to * perform a scsi_hba_bus_config(BUS_CONFIG_ALL) on self (HBA) followed by * a scsi_hba_bus_config(BUS_CONFIG_ONE) on each child of self (each iport). */ /* ARGSUSED */ static int scsi_hba_bus_config_prom_node(dev_info_t *self, uint_t flags, void *arg, dev_info_t **childp) { char **iports; int circ, i; int ret = NDI_FAILURE; unsigned int num_iports = 0; dev_info_t *pdip = NULL; char *addr = NULL; /* check to see if this is an HBA that defined scsi iports */ ret = ddi_prop_lookup_string_array(DDI_DEV_T_ANY, self, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "scsi-iports", &iports, &num_iports); if (ret != DDI_SUCCESS) { return (ret); } ASSERT(num_iports > 0); addr = kmem_zalloc(SCSI_MAXNAMELEN, KM_SLEEP); ret = NDI_FAILURE; scsi_hba_devi_enter(self, &circ); /* create iport nodes for each scsi port/bus */ for (i = 0; i < num_iports; i++) { bzero(addr, SCSI_MAXNAMELEN); /* Prepend the iport name */ (void) snprintf(addr, SCSI_MAXNAMELEN, "iport@%s", iports[i]); if (pdip = scsi_hba_bus_config_port(self, addr, SE_BUSCONFIG)) { if (ndi_busop_bus_config(self, NDI_NO_EVENT, BUS_CONFIG_ONE, addr, &pdip, 0) != NDI_SUCCESS) { continue; } /* * Try to configure child under iport see wehter * request node is the child of the iport node */ if (ndi_devi_config_one(pdip, arg, childp, NDI_NO_EVENT) == NDI_SUCCESS) { ret = NDI_SUCCESS; break; } } } scsi_hba_devi_exit(self, circ); kmem_free(addr, SCSI_MAXNAMELEN); ddi_prop_free(iports); return (ret); } #endif /* * Perform iport port/bus bus_config. */ static int scsi_hba_bus_config_iports(dev_info_t *self, uint_t flags, ddi_bus_config_op_t op, void *arg, dev_info_t **childp) { char *nameaddr, *addr; char **iports; int circ, i; int ret = NDI_FAILURE; unsigned int num_iports = 0; /* check to see if this is an HBA that defined scsi iports */ ret = ddi_prop_lookup_string_array(DDI_DEV_T_ANY, self, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "scsi-iports", &iports, &num_iports); if (ret != DDI_SUCCESS) { return (ret); } ASSERT(num_iports > 0); scsi_hba_devi_enter(self, &circ); switch (op) { case BUS_CONFIG_ONE: /* return if this operation is not against an iport node */ nameaddr = (char *)arg; if ((nameaddr == NULL) || (strncmp(nameaddr, "iport@", strlen("iport@")) != 0)) { ret = NDI_FAILURE; scsi_hba_devi_exit(self, circ); ddi_prop_free(iports); return (ret); } /* parse the port number from "iport@%s" */ addr = nameaddr + strlen("iport@"); /* check to see if this port was registered */ for (i = 0; i < num_iports; i++) { if (strcmp((iports[i]), addr) == 0) break; } if (i == num_iports) { ret = NDI_FAILURE; break; } /* create the iport node child */ if (scsi_hba_bus_config_port(self, nameaddr, SE_BUSCONFIG)) { ret = NDI_SUCCESS; } break; case BUS_CONFIG_ALL: case BUS_CONFIG_DRIVER: addr = kmem_zalloc(SCSI_MAXNAMELEN, KM_SLEEP); /* create iport nodes for each scsi port/bus */ for (i = 0; i < num_iports; i++) { bzero(addr, SCSI_MAXNAMELEN); /* Prepend the iport name */ (void) snprintf(addr, SCSI_MAXNAMELEN, "iport@%s", iports[i]); (void) scsi_hba_bus_config_port(self, addr, SE_BUSCONFIG); } kmem_free(addr, SCSI_MAXNAMELEN); ret = NDI_SUCCESS; break; } if (ret == NDI_SUCCESS) { #ifdef sparc /* * Mask NDI_PROMNAME since PROM doesn't have iport * node at all. */ flags &= (~NDI_PROMNAME); #endif flags |= NDI_MDI_FALLBACK; /* devinfo&pathinfo children */ ret = ndi_busop_bus_config(self, flags, op, arg, childp, 0); } scsi_hba_devi_exit(self, circ); ddi_prop_free(iports); return (ret); } static int scsi_iportmap_config(void *arg, damap_t *mapp, damap_id_t tgtid) { dev_info_t *self = (dev_info_t *)arg; int circ; char nameaddr[SCSI_MAXNAMELEN]; char *iport_addr; dev_info_t *childp; scsi_hba_devi_enter(self, &circ); iport_addr = damap_id2addr(mapp, tgtid); SCSI_HBA_LOG((_LOGIPT, self, NULL, "%s @%s", damap_name(mapp), iport_addr)); (void) snprintf(nameaddr, sizeof (nameaddr), "iport@%s", iport_addr); childp = scsi_hba_bus_config_port(self, nameaddr, SE_HP); scsi_hba_devi_exit(self, circ); return (childp != NULL ? DAM_SUCCESS : DAM_FAILURE); } static int scsi_iportmap_unconfig(void *arg, damap_t *mapp, damap_id_t tgtid) { dev_info_t *self = arg; dev_info_t *childp; /* iport child of HBA node */ int circ, empty; char *addr; char nameaddr[SCSI_MAXNAMELEN]; scsi_hba_tran_t *tran; addr = damap_id2addr(mapp, tgtid); SCSI_HBA_LOG((_LOGIPT, self, NULL, "%s @%s", damap_name(mapp), addr)); (void) snprintf(nameaddr, sizeof (nameaddr), "iport@%s", addr); scsi_hba_devi_enter(self, &circ); if ((childp = ndi_devi_findchild(self, nameaddr)) == NULL) { scsi_hba_devi_exit(self, circ); return (DAM_FAILURE); } tran = ddi_get_driver_private(childp); ASSERT(tran); ndi_hold_devi(childp); scsi_hba_devi_exit(self, circ); /* * A begin/end (clear) against the iport's * tgtmap will trigger unconfigure of all * targets on the iport. * * Future: This bit of code only works if the * target map reporting style is are full * reports and not per-address. Maybe we * should plan on handling this by * auto-unconfiguration when destroying the * target map(s). */ (void) scsi_hba_tgtmap_set_begin(tran->tran_tgtmap); (void) scsi_hba_tgtmap_set_end(tran->tran_tgtmap, 0); /* wait for unconfigure */ (void) scsi_tgtmap_sync(tran->tran_tgtmap, 0); empty = scsi_tgtmap_is_empty(tran->tran_tgtmap); scsi_hba_devi_enter(self, &circ); ndi_rele_devi(childp); /* If begin/end/sync ends in empty map, offline/remove. */ if (empty) { if (ndi_devi_offline(childp, NDI_DEVFS_CLEAN | NDI_DEVI_REMOVE) == DDI_SUCCESS) { SCSI_HBA_LOG((_LOGUNCFG, self, NULL, "devinfo iport@%s offlined and removed", addr)); } else if (ndi_devi_device_remove(childp)) { /* Offline/rem failed, note new device_remove */ SCSI_HBA_LOG((_LOGUNCFG, self, NULL, "devinfo iport@%s offline failed, " "device_remove", addr)); } } scsi_hba_devi_exit(self, circ); return (empty ? DAM_SUCCESS : DAM_FAILURE); } int scsi_hba_iportmap_create(dev_info_t *self, int csync_usec, int settle_usec, scsi_hba_iportmap_t **handle) { scsi_hba_tran_t *tran; damap_t *mapp; char context[64]; impl_scsi_iportmap_t *iportmap; if (self == NULL || csync_usec == 0 || settle_usec == 0 || handle == NULL) return (DDI_FAILURE); *handle = NULL; if (scsi_hba_iport_unit_address(self) != NULL) return (DDI_FAILURE); tran = (scsi_hba_tran_t *)ddi_get_driver_private(self); ASSERT(tran); if (tran == NULL) return (DDI_FAILURE); (void) snprintf(context, sizeof (context), "%s%d.iportmap", ddi_driver_name(self), ddi_get_instance(self)); if (damap_create(context, DAMAP_REPORT_PERADDR, DAMAP_SERIALCONFIG, settle_usec, NULL, NULL, NULL, self, scsi_iportmap_config, scsi_iportmap_unconfig, &mapp) != DAM_SUCCESS) { return (DDI_FAILURE); } iportmap = kmem_zalloc(sizeof (*iportmap), KM_SLEEP); iportmap->iportmap_hba_dip = self; iportmap->iportmap_dam = mapp; iportmap->iportmap_create_window = 1; /* start with window */ iportmap->iportmap_create_time = ddi_get_lbolt64(); iportmap->iportmap_create_csync_usec = csync_usec; iportmap->iportmap_settle_usec = settle_usec; iportmap->iportmap_sync_cnt = 0; tran->tran_iportmap = (scsi_hba_iportmap_t *)iportmap; *handle = (scsi_hba_iportmap_t *)iportmap; SCSI_HBA_LOG((_LOGIPT, self, NULL, "%s", damap_name(mapp))); return (DDI_SUCCESS); } void scsi_hba_iportmap_destroy(scsi_hba_iportmap_t *handle) { impl_scsi_iportmap_t *iportmap = (impl_scsi_iportmap_t *)handle; dev_info_t *self = iportmap->iportmap_hba_dip; SCSI_HBA_LOG((_LOGIPT, self, NULL, "%s", damap_name(iportmap->iportmap_dam))); damap_destroy(iportmap->iportmap_dam); kmem_free(iportmap, sizeof (*iportmap)); } int scsi_hba_iportmap_iport_add(scsi_hba_iportmap_t *handle, char *iport_addr, void *iport_priv) { impl_scsi_iportmap_t *iportmap = (impl_scsi_iportmap_t *)handle; dev_info_t *self = iportmap->iportmap_hba_dip; SCSI_HBA_LOG((_LOGIPT, self, NULL, "%s @%s", damap_name(iportmap->iportmap_dam), iport_addr)); return ((damap_addr_add(iportmap->iportmap_dam, iport_addr, NULL, NULL, iport_priv) == DAM_SUCCESS) ? DDI_SUCCESS : DDI_FAILURE); } int scsi_hba_iportmap_iport_remove(scsi_hba_iportmap_t *handle, char *iport_addr) { impl_scsi_iportmap_t *iportmap = (impl_scsi_iportmap_t *)handle; dev_info_t *self = iportmap->iportmap_hba_dip; SCSI_HBA_LOG((_LOGIPT, self, NULL, "%s @%s", damap_name(iportmap->iportmap_dam), iport_addr)); return ((damap_addr_del(iportmap->iportmap_dam, iport_addr) == DAM_SUCCESS) ? DDI_SUCCESS : DDI_FAILURE); } int scsi_hba_iportmap_lookup(scsi_hba_iportmap_t *handle, char *iport_addr) { impl_scsi_iportmap_t *iportmap = (impl_scsi_iportmap_t *)handle; dev_info_t *self = iportmap->iportmap_hba_dip; damap_id_t iportid; iportid = damap_lookup(iportmap->iportmap_dam, iport_addr); if (iportid != NODAM) { SCSI_HBA_LOG((_LOG(3), self, NULL, "%s @%s found", damap_name(iportmap->iportmap_dam), iport_addr)); damap_id_rele(iportmap->iportmap_dam, iportid); return (DDI_SUCCESS); } SCSI_HBA_LOG((_LOG(3), self, NULL, "%s @%s not found", damap_name(iportmap->iportmap_dam), iport_addr)); return (DDI_FAILURE); } static int scsi_lunmap_config(void *arg, damap_t *lundam, damap_id_t lunid) { impl_scsi_tgtmap_t *tgtmap = (impl_scsi_tgtmap_t *)arg; scsi_hba_tran_t *tran = tgtmap->tgtmap_tran; dev_info_t *self = tran->tran_iport_dip; char *addr; addr = damap_id2addr(lundam, lunid); SCSI_HBA_LOG((_LOGLUN, self, NULL, "%s @%s", damap_name(lundam), addr)); if (scsi_hba_bus_configone_addr(self, addr, SE_HP) != NULL) return (DAM_SUCCESS); else return (DAM_FAILURE); } static int scsi_lunmap_unconfig(void *arg, damap_t *lundam, damap_id_t lunid) { impl_scsi_tgtmap_t *tgtmap = (impl_scsi_tgtmap_t *)arg; scsi_hba_tran_t *tran = tgtmap->tgtmap_tran; dev_info_t *self = tran->tran_iport_dip; char *addr; addr = damap_id2addr(lundam, lunid); SCSI_HBA_LOG((_LOGLUN, self, NULL, "%s @%s", damap_name(lundam), addr)); scsi_hba_bus_unconfigone_addr(self, addr); return (DAM_SUCCESS); } static int scsi_lunmap_create(dev_info_t *self, impl_scsi_tgtmap_t *tgtmap, char *taddr) { char context[64]; damap_t *tgtdam; damap_id_t tgtid; damap_t *lundam; int optflags; (void) snprintf(context, sizeof (context), "%s%d.%s.lunmap", ddi_driver_name(self), ddi_get_instance(self), taddr); tgtdam = tgtmap->tgtmap_dam[SCSI_TGT_SCSI_DEVICE]; tgtid = damap_lookup(tgtdam, taddr); if (tgtid == NODAM) { SCSI_HBA_LOG((_LOG(1), self, NULL, "target %s not found", context)); return (DDI_FAILURE); } lundam = damap_id_priv_get(tgtdam, tgtid); if (lundam) { SCSI_HBA_LOG((_LOG(1), self, NULL, "lunmap %s already created", context)); damap_id_rele(tgtdam, tgtid); return (DDI_FAILURE); } optflags = (ddi_prop_get_int(DDI_DEV_T_ANY, self, DDI_PROP_NOTPROM | DDI_PROP_DONTPASS, "scsi-enumeration", scsi_enumeration) & SCSI_ENUMERATION_MT_LUN_DISABLE) ? DAMAP_SERIALCONFIG : DAMAP_MTCONFIG; /* NOTE: expected ref at tgtid/taddr: 2: caller + lookup. */ ASSERT(damap_id_ref(tgtdam, tgtid) == 2); SCSI_HBA_LOG((_LOGLUN, self, NULL, "%s creat, id %d ref %d", context, tgtid, damap_id_ref(tgtdam, tgtid))); /* create lundam */ if (damap_create(context, DAMAP_REPORT_FULLSET, optflags, 1, NULL, NULL, NULL, tgtmap, scsi_lunmap_config, scsi_lunmap_unconfig, &lundam) != DAM_SUCCESS) { SCSI_HBA_LOG((_LOG(1), self, NULL, "%s create failed, id %d ref %d", context, tgtid, damap_id_ref(tgtdam, tgtid))); damap_id_rele(tgtdam, tgtid); return (DDI_FAILURE); } /* * Return with damap_id_hold at tgtid/taddr from damap_lookup to * account for damap_id_prv_set below. */ damap_id_priv_set(tgtdam, tgtid, lundam); return (DDI_SUCCESS); } static void scsi_lunmap_destroy(dev_info_t *self, impl_scsi_tgtmap_t *tgtmap, char *taddr) { char context[64]; damap_t *tgtdam; damap_id_t tgtid; damap_t *lundam; (void) snprintf(context, sizeof (context), "%s%d.%s.lunmap", ddi_driver_name(self), ddi_get_instance(self), taddr); tgtdam = tgtmap->tgtmap_dam[SCSI_TGT_SCSI_DEVICE]; tgtid = damap_lookup(tgtdam, taddr); if (tgtid == NODAM) { SCSI_HBA_LOG((_LOG(1), self, NULL, "target %s not found", context)); return; } lundam = (damap_t *)damap_id_priv_get(tgtdam, tgtid); if (lundam == NULL) { damap_id_rele(tgtdam, tgtid); /* from damap_lookup */ SCSI_HBA_LOG((_LOG(1), self, NULL, "lunmap %s already destroyed", context)); return; } /* NOTE: expected ref at tgtid/taddr: 3: priv_set + caller + lookup. */ ASSERT(damap_id_ref(tgtdam, tgtid) == 3); SCSI_HBA_LOG((_LOGLUN, self, NULL, "%s, id %d ref %d", damap_name(lundam), tgtid, damap_id_ref(tgtdam, tgtid))); /* * A begin/end (clear) against a target's lunmap will trigger * unconfigure of all LUNs on the target. */ scsi_lunmap_set_begin(self, lundam); scsi_lunmap_set_end(self, lundam); SCSI_HBA_LOG((_LOGLUN, self, NULL, "%s sync begin", damap_name(lundam))); (void) damap_sync(lundam, 0); /* wait for unconfigure */ SCSI_HBA_LOG((_LOGLUN, self, NULL, "%s sync end", damap_name(lundam))); damap_id_priv_set(tgtdam, tgtid, NULL); /* release hold established by damap_lookup above */ damap_id_rele(tgtdam, tgtid); /* release hold established since scsi_lunmap_create() */ damap_id_rele(tgtdam, tgtid); damap_destroy(lundam); } static void scsi_lunmap_set_begin(dev_info_t *self, damap_t *lundam) { SCSI_HBA_LOG((_LOGLUN, self, NULL, "%s", damap_name(lundam))); (void) damap_addrset_begin(lundam); } static int scsi_lunmap_set_add(dev_info_t *self, damap_t *lundam, char *taddr, scsi_lun64_t lun64, int sfunc) { char ua[SCSI_MAXNAMELEN]; /* make unit address string form of "@taddr,lun[,sfunc]" */ if (sfunc == -1) (void) snprintf(ua, sizeof (ua), "%s,%" PRIx64, taddr, lun64); else (void) snprintf(ua, sizeof (ua), "%s,%" PRIx64 ",%x", taddr, lun64, sfunc); SCSI_HBA_LOG((_LOGLUN, self, NULL, "%s @%s", damap_name(lundam), ua)); return ((damap_addrset_add(lundam, ua, NULL, NULL, NULL) == DAM_SUCCESS) ? DDI_SUCCESS : DDI_FAILURE); } static void scsi_lunmap_set_end(dev_info_t *self, damap_t *lundam) { SCSI_HBA_LOG((_LOGLUN, self, NULL, "%s", damap_name(lundam))); (void) damap_addrset_end(lundam, 0); } int scsi_lunmap_lookup(dev_info_t *self, damap_t *lundam, char *addr) { damap_id_t lunid; if ((lunid = damap_lookup(lundam, addr)) != NODAM) { SCSI_HBA_LOG((_LOG(3), self, NULL, "%s @%s found", damap_name(lundam), addr)); damap_id_rele(lundam, lunid); return (DDI_SUCCESS); } SCSI_HBA_LOG((_LOG(3), self, NULL, "%s @%s not found", damap_name(lundam), addr)); return (DDI_FAILURE); } /* * phymap implementation * * We manage the timed aggregation of phys into a phy map * by creating a * SAS port construct (based upon 'name' of "local,remote" SAS addresses) * upon the first link up. As time goes on additional phys may join that port. * After an appropriate amount of settle time, we trigger the activation * callback which will then take the resultant bit mask of phys (phymask) in * the SAS port and use that to call back to the callback function * provided by the additional caller. * * We cross check to make sure that phys only exist in one SAS port at a * time by having soft state for each phy point back to the created * SAS port. * * NOTE: Make SAS_PHY_UA_LEN max(SAS_PHY_PHYMASK_LEN, SAS_PHY_NAME_LEN) * so we have enough space if sas_phymap_bitset2phymaskua phymask address * is already in use, and we end up using port name as unit address. */ #define SAS_PHY_NAME_FMT "%" PRIx64 ",%" PRIx64 #define SAS_PHY_NAME_LEN (16 + 1 + 16 + 1) #define SAS_PHY_NPHY (SAS2_PHYNUM_MAX + 1) #define SAS_PHY_PHYMASK_LEN ((roundup(SAS_PHY_NPHY, 4)) / 4) #if (SAS_PHY_PHYMASK_LEN > SAS_PHY_NAME_LEN) #define SAS_PHY_UA_LEN SAS_PHY_PHYMASK_LEN #else #define SAS_PHY_UA_LEN SAS_PHY_NAME_LEN #endif typedef struct impl_sas_physet { /* needed for name2phys destroy */ struct impl_sas_physet *physet_next; char *physet_name; bitset_t *physet_phys; } impl_sas_physet_t; typedef struct impl_sas_phymap { dev_info_t *phymap_self; kmutex_t phymap_lock; damap_t *phymap_dam; void *phymap_phy2name; ddi_soft_state_bystr *phymap_name2phys; /* bitset */ ddi_soft_state_bystr *phymap_name2ua; ddi_soft_state_bystr *phymap_ua2name; /* Noisy phy information - ensure forward progress for noisy phys */ int phymap_phy_max; /* max phy# */ int phymap_reports; /* per period */ int phymap_reports_max; /* scales */ int phymap_phys_noisy; /* detected */ /* These are for callbacks to the consumer. */ sas_phymap_activate_cb_t phymap_acp; sas_phymap_deactivate_cb_t phymap_dcp; void *phymap_private; struct impl_sas_physet *phymap_physets; } impl_sas_phymap_t; /* Detect noisy phy: max changes per stabilization period per phy. */ static int sas_phymap_phy_max_factor = 16; /* * Convert bitset into a unit-address string. The maximum string length would * be the maximum number of phys, rounded up by 4 and divided by 4. */ static void sas_phymap_bitset2phymaskua(bitset_t *phys, char *buf) { char *ptr; int grp; int cur; uint_t bit; bit = roundup(SAS_PHY_NPHY, 4); grp = 4; ptr = buf; cur = 0; do { bit -= 1; grp -= 1; if (bitset_in_set(phys, bit)) { cur |= (1 << grp); } if (grp == 0) { grp = 4; if (cur || ptr != buf) { *ptr++ = "0123456789abcdef"[cur]; *ptr = 0; } cur = 0; } } while (bit != 0); if (ptr == buf) { *ptr++ = '0'; *ptr = 0; } } static int sas_phymap_config(void *arg, damap_t *phydam, damap_id_t phyid) { impl_sas_phymap_t *phymap = (impl_sas_phymap_t *)arg; char *context = damap_name(phymap->phymap_dam); char *damn; char *name; bitset_t *phys; char *ua; void *ua_priv; ASSERT(context); mutex_enter(&phymap->phymap_lock); phymap->phymap_reports = phymap->phymap_phys_noisy = 0; /* Get the name ("local,remote" address string) from damap. */ damn = damap_id2addr(phydam, phyid); /* Get the bitset of phys currently forming the port. */ phys = ddi_soft_state_bystr_get(phymap->phymap_name2phys, damn); if (phys == NULL) { SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: no phys", context, damn)); mutex_exit(&phymap->phymap_lock); return (DAM_FAILURE); } /* allocate, get, and initialize name index of name2ua map */ if (ddi_soft_state_bystr_zalloc(phymap->phymap_name2ua, damn) != DDI_SUCCESS) { SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: failed name2ua alloc", context, damn)); mutex_exit(&phymap->phymap_lock); return (DAM_FAILURE); } if (!(ua = ddi_soft_state_bystr_get(phymap->phymap_name2ua, damn))) { SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: no name2ua", context, damn)); mutex_exit(&phymap->phymap_lock); return (DAM_FAILURE); } sas_phymap_bitset2phymaskua(phys, ua); /* set ua */ /* see if phymask ua index already allocated in ua2name map */ if (name = ddi_soft_state_bystr_get(phymap->phymap_ua2name, ua)) { /* * The 'phymask' sas_phymap_bitset2phymaskua ua is * already in use. This means that original phys have * formed into a new port, and that the original port * still exists (it has migrated to some completely * different set of phys). In this corner-case we use * "local,remote" name as a 'temporary' unit address. * Reset ua in name2ua map. */ (void) strlcpy(ua, damn, SAS_PHY_NAME_LEN); name = ddi_soft_state_bystr_get(phymap->phymap_ua2name, ua); if (name) { /* The "local,remote" ua should be new... */ SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s ua already configured", context, ua)); mutex_exit(&phymap->phymap_lock); return (DAM_SUCCESS); } } /* allocate, get, and init ua index of ua2name map */ if (ddi_soft_state_bystr_zalloc(phymap->phymap_ua2name, ua) != DDI_SUCCESS) { ddi_soft_state_bystr_free(phymap->phymap_name2ua, damn); SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: failed ua2name alloc", context, damn)); mutex_exit(&phymap->phymap_lock); return (DAM_FAILURE); } name = ddi_soft_state_bystr_get(phymap->phymap_ua2name, ua); if (name == NULL) { ddi_soft_state_bystr_free(phymap->phymap_name2ua, damn); SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: no ua2name", context, ua)); mutex_exit(&phymap->phymap_lock); return (DAM_FAILURE); } /* set name in ua2name map */ (void) strlcpy(name, damn, SAS_PHY_NAME_LEN); SCSI_HBA_LOG((_LOGPHY, phymap->phymap_self, NULL, "%s: %s: ua %s: activate", context, damn, ua)); if (phymap->phymap_acp) { /* * drop our lock and invoke the activation callback */ mutex_exit(&phymap->phymap_lock); ua_priv = NULL; (phymap->phymap_acp)(phymap->phymap_private, ua, &ua_priv); mutex_enter(&phymap->phymap_lock); damap_id_priv_set(phydam, phyid, ua_priv); } SCSI_HBA_LOG((_LOGPHY, phymap->phymap_self, NULL, "%s: %s: ua %s: activate complete", context, damn, ua)); mutex_exit(&phymap->phymap_lock); return (DAM_SUCCESS); } /*ARGSUSED*/ static int sas_phymap_unconfig(void *arg, damap_t *phydam, damap_id_t phyid) { impl_sas_phymap_t *phymap = (impl_sas_phymap_t *)arg; char *context = damap_name(phymap->phymap_dam); char *damn; char *ua; void *ua_priv; ASSERT(context); mutex_enter(&phymap->phymap_lock); phymap->phymap_reports = phymap->phymap_phys_noisy = 0; /* Get the name ("local,remote" address string) from damap. */ damn = damap_id2addr(phydam, phyid); if (!(ua = ddi_soft_state_bystr_get(phymap->phymap_name2ua, damn))) { SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: no name2ua", context, damn)); mutex_exit(&phymap->phymap_lock); return (DAM_FAILURE); } SCSI_HBA_LOG((_LOGPHY, phymap->phymap_self, NULL, "%s: %s: ua %s: deactivate", context, damn, ua)); if (phymap->phymap_dcp) { ua_priv = damap_id_priv_get(phydam, phyid); mutex_exit(&phymap->phymap_lock); (phymap->phymap_dcp)(phymap->phymap_private, ua, ua_priv); mutex_enter(&phymap->phymap_lock); } SCSI_HBA_LOG((_LOGPHY, phymap->phymap_self, NULL, "%s: %s: ua %s: deactivate complete", context, damn, ua)); /* delete ua<->name mappings */ ddi_soft_state_bystr_free(phymap->phymap_ua2name, ua); ddi_soft_state_bystr_free(phymap->phymap_name2ua, damn); mutex_exit(&phymap->phymap_lock); return (DAM_SUCCESS); } int sas_phymap_create(dev_info_t *self, int settle_usec, sas_phymap_mode_t mode, void *mode_argument, void *phymap_priv, sas_phymap_activate_cb_t activate_cb, sas_phymap_deactivate_cb_t deactivate_cb, sas_phymap_t **handlep) { _NOTE(ARGUNUSED(mode_argument)); char context[64]; impl_sas_phymap_t *phymap; if (self == NULL || settle_usec == 0 || handlep == NULL) return (DDI_FAILURE); if (mode != PHYMAP_MODE_SIMPLE) return (DDI_FAILURE); phymap = kmem_zalloc(sizeof (*phymap), KM_SLEEP); phymap->phymap_self = self; phymap->phymap_reports_max = 1 * sas_phymap_phy_max_factor; phymap->phymap_acp = activate_cb; phymap->phymap_dcp = deactivate_cb; phymap->phymap_private = phymap_priv; mutex_init(&phymap->phymap_lock, NULL, MUTEX_DRIVER, NULL); (void) snprintf(context, sizeof (context), "%s%d.phymap", ddi_driver_name(self), ddi_get_instance(self)); SCSI_HBA_LOG((_LOGPHY, self, NULL, "%s", context)); if (ddi_soft_state_init(&phymap->phymap_phy2name, SAS_PHY_NAME_LEN, SAS_PHY_NPHY) != 0) goto fail; if (ddi_soft_state_bystr_init(&phymap->phymap_name2phys, sizeof (bitset_t), SAS_PHY_NPHY) != 0) goto fail; if (ddi_soft_state_bystr_init(&phymap->phymap_name2ua, SAS_PHY_UA_LEN, SAS_PHY_NPHY) != 0) goto fail; if (ddi_soft_state_bystr_init(&phymap->phymap_ua2name, SAS_PHY_NAME_LEN, SAS_PHY_NPHY) != 0) goto fail; if (damap_create(context, DAMAP_REPORT_PERADDR, DAMAP_SERIALCONFIG, settle_usec, NULL, NULL, NULL, phymap, sas_phymap_config, sas_phymap_unconfig, &phymap->phymap_dam) != DAM_SUCCESS) goto fail; *handlep = (sas_phymap_t *)phymap; return (DDI_SUCCESS); fail: sas_phymap_destroy((sas_phymap_t *)phymap); *handlep = NULL; return (DDI_FAILURE); } void sas_phymap_destroy(sas_phymap_t *handle) { impl_sas_phymap_t *phymap = (impl_sas_phymap_t *)handle; char *context; struct impl_sas_physet *physet, *nphyset; bitset_t *phys; char *name; context = phymap->phymap_dam ? damap_name(phymap->phymap_dam) : "unknown"; SCSI_HBA_LOG((_LOGPHY, phymap->phymap_self, NULL, "%s", context)); if (phymap->phymap_dam) damap_destroy(phymap->phymap_dam); /* free the bitsets of allocated physets */ for (physet = phymap->phymap_physets; physet; physet = nphyset) { nphyset = physet->physet_next; phys = physet->physet_phys; name = physet->physet_name; if (phys) bitset_fini(phys); if (name) { ddi_soft_state_bystr_free( phymap->phymap_name2phys, name); strfree(name); } kmem_free(physet, sizeof (*physet)); } /* free the maps */ if (phymap->phymap_ua2name) ddi_soft_state_bystr_fini(&phymap->phymap_ua2name); if (phymap->phymap_name2ua) ddi_soft_state_bystr_fini(&phymap->phymap_name2ua); if (phymap->phymap_name2phys) ddi_soft_state_bystr_fini(&phymap->phymap_name2phys); if (phymap->phymap_phy2name) ddi_soft_state_fini(&phymap->phymap_phy2name); mutex_destroy(&phymap->phymap_lock); kmem_free(phymap, sizeof (*phymap)); } int sas_phymap_phy_add(sas_phymap_t *handle, int phy, uint64_t local, uint64_t remote) { impl_sas_phymap_t *phymap = (impl_sas_phymap_t *)handle; char *context = damap_name(phymap->phymap_dam); char port[SAS_PHY_NAME_LEN]; char *name; int phy2name_allocated = 0; bitset_t *phys; struct impl_sas_physet *physet; int rv; /* Create the SAS port name from the local and remote addresses. */ (void) snprintf(port, SAS_PHY_NAME_LEN, SAS_PHY_NAME_FMT, local, remote); mutex_enter(&phymap->phymap_lock); SCSI_HBA_LOG((_LOGPHY, phymap->phymap_self, NULL, "%s: %s: add phy %d", context, port, phy)); /* Check for conflict in phy2name map */ name = ddi_get_soft_state(phymap->phymap_phy2name, phy); if (name) { if (strcmp(name, port) != 0) SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: add phy %d: " "already in %s", context, port, phy, name)); else SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: add phy %d: " "duplicate add", context, port, phy)); mutex_exit(&phymap->phymap_lock); return (DDI_FAILURE); } /* allocate, get, and initialize phy index of phy2name map */ if (ddi_soft_state_zalloc( phymap->phymap_phy2name, phy) != DDI_SUCCESS) { SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: failed phy2name alloc", context, port)); goto fail; } name = ddi_get_soft_state(phymap->phymap_phy2name, phy); if (name == NULL) { SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: no phy2name", context, port)); goto fail; } phy2name_allocated = 1; (void) strlcpy(name, port, SAS_PHY_NAME_LEN); /* set name */ /* Find/alloc, initialize name index of name2phys map */ phys = ddi_soft_state_bystr_get(phymap->phymap_name2phys, name); if (phys == NULL) { if (ddi_soft_state_bystr_zalloc(phymap->phymap_name2phys, name) != DDI_SUCCESS) { SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: failed name2phys alloc", context, name)); goto fail; } phys = ddi_soft_state_bystr_get(phymap->phymap_name2phys, name); if (phys == NULL) { SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: no name2phys", context, name)); goto fail; } /* Initialize bitset of phys. */ bitset_init(phys); bitset_resize(phys, SAS_PHY_NPHY); /* Keep a list of information for destroy. */ physet = kmem_zalloc(sizeof (*physet), KM_SLEEP); physet->physet_name = strdup(name); physet->physet_phys = phys; physet->physet_next = phymap->phymap_physets; phymap->phymap_physets = physet; } ASSERT(phys); /* Reflect 'add' in phys bitset. */ if (bitset_atomic_test_and_add(phys, phy) < 0) { /* It is an error if the phy was already recorded. */ SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: phy bit %d already in port", context, name, phy)); goto fail; } /* * Check to see if we have a new phy_max for this map, and if so * scale phymap_reports_max to the new number of phys. */ if (phy > phymap->phymap_phy_max) { phymap->phymap_phy_max = phy + 1; phymap->phymap_reports_max = phymap->phymap_phy_max * sas_phymap_phy_max_factor; } /* * If we have not reached phymap_reports_max, start/restart the * activate timer. Otherwise, if phymap->phymap_reports add/rem reports * ever exceeds phymap_reports_max due to noisy phys, then report the * noise and force stabilization by stopping reports into the damap. * * The first config/unconfig callout out of the damap will reset * phymap->phymap_reports. */ rv = DDI_SUCCESS; if (phymap->phymap_reports++ < phymap->phymap_reports_max) { if (damap_addr_add(phymap->phymap_dam, name, NULL, NULL, NULL) == DAM_SUCCESS) { SCSI_HBA_LOG((_LOGPHY, phymap->phymap_self, NULL, "%s: %s: damap_addr_add", context, name)); } else { SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: damap_addr_add failed", context, name)); rv = DDI_FAILURE; } } else { phymap->phymap_phys_noisy++; if (phymap->phymap_phys_noisy == 1) SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: noisy phys", context, name)); } mutex_exit(&phymap->phymap_lock); return (rv); fail: if (phy2name_allocated) ddi_soft_state_free(phymap->phymap_phy2name, phy); mutex_exit(&phymap->phymap_lock); return (DDI_FAILURE); } int sas_phymap_phy_rem(sas_phymap_t *handle, int phy) { impl_sas_phymap_t *phymap = (impl_sas_phymap_t *)handle; char *context = damap_name(phymap->phymap_dam); char *name; bitset_t *phys; int rv = DDI_FAILURE; ASSERT(context); mutex_enter(&phymap->phymap_lock); phymap->phymap_reports++; /* Find and free phy index of phy2name map */ name = ddi_get_soft_state(phymap->phymap_phy2name, phy); if (name == NULL) { SCSI_HBA_LOG((_LOG_NF(WARN), "%s: rem phy %d: never added", context, phy)); goto fail; } /* NOTE: always free phy index of phy2name map before return... */ SCSI_HBA_LOG((_LOGPHY, phymap->phymap_self, NULL, "%s: %s: rem phy %d", context, name, phy)); /* Get bitset of phys currently associated with named port. */ phys = ddi_soft_state_bystr_get(phymap->phymap_name2phys, name); if (phys == NULL) { SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: name2phys failed", context, name)); goto fail; } /* Reflect 'rem' in phys bitset. */ if (bitset_atomic_test_and_del(phys, phy) < 0) { /* It is an error if the phy wasn't one of the port's phys. */ SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: phy bit %d not in port", context, name, phy)); goto fail; } /* If this was the last phy in the port, start the deactivate timer. */ if (bitset_is_null(phys) && (phymap->phymap_reports++ < phymap->phymap_reports_max)) { if (damap_addr_del(phymap->phymap_dam, name) == DAM_SUCCESS) { SCSI_HBA_LOG((_LOGPHY, phymap->phymap_self, NULL, "%s: %s: damap_addr_del", context, name)); } else { SCSI_HBA_LOG((_LOG_NF(WARN), "%s: %s: damap_addr_del failure", context, name)); goto fail; } } rv = DDI_SUCCESS; /* free phy index of phy2name map */ fail: if (name) ddi_soft_state_free(phymap->phymap_phy2name, phy); /* free */ mutex_exit(&phymap->phymap_lock); return (rv); } char * sas_phymap_lookup_ua(sas_phymap_t *handle, uint64_t local, uint64_t remote) { impl_sas_phymap_t *phymap = (impl_sas_phymap_t *)handle; char *context = damap_name(phymap->phymap_dam); char name[SAS_PHY_NAME_LEN]; char *ua; ASSERT(context); (void) snprintf(name, SAS_PHY_NAME_LEN, SAS_PHY_NAME_FMT, local, remote); mutex_enter(&phymap->phymap_lock); ua = ddi_soft_state_bystr_get(phymap->phymap_name2ua, name); SCSI_HBA_LOG((_LOG(3), phymap->phymap_self, NULL, "%s: %s: ua %s", context, name, ua ? ua : "NULL")); mutex_exit(&phymap->phymap_lock); return (ua); } void * sas_phymap_lookup_uapriv(sas_phymap_t *handle, char *ua) { impl_sas_phymap_t *phymap = (impl_sas_phymap_t *)handle; char *context = damap_name(phymap->phymap_dam); char *name; damap_id_t phyid; void *ua_priv = NULL; ASSERT(context); mutex_enter(&phymap->phymap_lock); name = ddi_soft_state_bystr_get(phymap->phymap_ua2name, ua); if (name) { phyid = damap_lookup(phymap->phymap_dam, name); if (phyid != NODAM) { ua_priv = damap_id_priv_get(phymap->phymap_dam, phyid); damap_id_rele(phymap->phymap_dam, phyid); } } SCSI_HBA_LOG((_LOG(3), phymap->phymap_self, NULL, "%s: %s: ua %s ua_priv %p", context, name, ua ? ua : "NULL", ua_priv)); mutex_exit(&phymap->phymap_lock); return (ua_priv); } int sas_phymap_uahasphys(sas_phymap_t *handle, char *ua) { impl_sas_phymap_t *phymap = (impl_sas_phymap_t *)handle; char *name; bitset_t *phys; int n = 0; mutex_enter(&phymap->phymap_lock); name = ddi_soft_state_bystr_get(phymap->phymap_ua2name, ua); if (name) { phys = ddi_soft_state_bystr_get(phymap->phymap_name2phys, name); if (phys) n = bitset_is_null(phys) ? 0 : 1; } mutex_exit(&phymap->phymap_lock); return (n); } sas_phymap_phys_t * sas_phymap_ua2phys(sas_phymap_t *handle, char *ua) { impl_sas_phymap_t *phymap = (impl_sas_phymap_t *)handle; char *name; bitset_t *phys; bitset_t *cphys = NULL; mutex_enter(&phymap->phymap_lock); name = ddi_soft_state_bystr_get(phymap->phymap_ua2name, ua); if (name == NULL) goto fail; phys = ddi_soft_state_bystr_get(phymap->phymap_name2phys, name); if (phys == NULL) goto fail; /* dup the phys and return */ cphys = kmem_alloc(sizeof (*cphys), KM_SLEEP); bitset_init(cphys); bitset_resize(cphys, SAS_PHY_NPHY); bitset_copy(phys, cphys); fail: mutex_exit(&phymap->phymap_lock); return ((sas_phymap_phys_t *)cphys); } int sas_phymap_phys_next(sas_phymap_phys_t *phys) { bitset_t *cphys = (bitset_t *)phys; int phy; phy = bitset_find(cphys); if (phy != -1) bitset_del(cphys, phy); return (phy); } void sas_phymap_phys_free(sas_phymap_phys_t *phys) { bitset_t *cphys = (bitset_t *)phys; if (cphys) { bitset_fini(cphys); kmem_free(cphys, sizeof (*cphys)); } } char * sas_phymap_phy2ua(sas_phymap_t *handle, int phy) { impl_sas_phymap_t *phymap = (impl_sas_phymap_t *)handle; char *name; char *ua; char *rua = NULL; mutex_enter(&phymap->phymap_lock); name = ddi_get_soft_state(phymap->phymap_phy2name, phy); if (name == NULL) goto fail; ua = ddi_soft_state_bystr_get(phymap->phymap_name2ua, name); if (ua == NULL) goto fail; /* dup the ua and return */ rua = strdup(ua); fail: mutex_exit(&phymap->phymap_lock); return (rua); } void sas_phymap_ua_free(char *ua) { if (ua) strfree(ua); }