/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include /* * Generic SCSI Host Bus Adapter interface implementation */ #include #include #include #include #include #include extern struct scsi_pkt *scsi_init_cache_pkt(struct scsi_address *, struct scsi_pkt *, struct buf *, int, int, int, int, int (*)(caddr_t), caddr_t); extern void scsi_free_cache_pkt(struct scsi_address *, struct scsi_pkt *); extern void scsi_cache_dmafree(struct scsi_address *, struct scsi_pkt *); extern void scsi_sync_cache_pkt(struct scsi_address *, struct scsi_pkt *); /* * Round up all allocations so that we can guarantee * long-long alignment. This is the same alignment * provided by kmem_alloc(). */ #define ROUNDUP(x) (((x) + 0x07) & ~0x07) static kmutex_t scsi_hba_mutex; kmutex_t scsi_log_mutex; struct scsi_hba_inst { dev_info_t *inst_dip; scsi_hba_tran_t *inst_hba_tran; struct scsi_hba_inst *inst_next; struct scsi_hba_inst *inst_prev; }; static struct scsi_hba_inst *scsi_hba_list = NULL; static struct scsi_hba_inst *scsi_hba_list_tail = NULL; kmutex_t scsi_flag_nointr_mutex; kcondvar_t scsi_flag_nointr_cv; /* * Prototypes for static functions */ static int scsi_hba_bus_ctl( dev_info_t *dip, dev_info_t *rdip, ddi_ctl_enum_t op, void *arg, void *result); static int scsi_hba_map_fault( dev_info_t *dip, dev_info_t *rdip, struct hat *hat, struct seg *seg, caddr_t addr, struct devpage *dp, pfn_t pfn, uint_t prot, uint_t lock); static int scsi_hba_get_eventcookie( dev_info_t *dip, dev_info_t *rdip, char *name, ddi_eventcookie_t *eventp); static int scsi_hba_add_eventcall( dev_info_t *dip, dev_info_t *rdip, ddi_eventcookie_t event, void (*callback)( dev_info_t *dip, ddi_eventcookie_t event, void *arg, void *bus_impldata), void *arg, ddi_callback_id_t *cb_id); static int scsi_hba_remove_eventcall( dev_info_t *devi, ddi_callback_id_t id); static int scsi_hba_post_event( dev_info_t *dip, dev_info_t *rdip, ddi_eventcookie_t event, void *bus_impldata); static int scsi_hba_info( dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result); static int scsi_hba_bus_config(dev_info_t *parent, uint_t flag, ddi_bus_config_op_t op, void *arg, dev_info_t **childp); static int scsi_hba_bus_unconfig(dev_info_t *parent, uint_t flag, ddi_bus_config_op_t op, void *arg); static int scsi_hba_bus_power(dev_info_t *parent, void *impl_arg, pm_bus_power_op_t op, void *arg, void *result); /* * Busops vector for SCSI HBA's. */ static struct bus_ops scsi_hba_busops = { BUSO_REV, nullbusmap, /* bus_map */ NULL, /* bus_get_intrspec */ NULL, /* bus_add_intrspec */ NULL, /* bus_remove_intrspec */ scsi_hba_map_fault, /* bus_map_fault */ ddi_dma_map, /* bus_dma_map */ ddi_dma_allochdl, /* bus_dma_allochdl */ ddi_dma_freehdl, /* bus_dma_freehdl */ ddi_dma_bindhdl, /* bus_dma_bindhdl */ ddi_dma_unbindhdl, /* bus_unbindhdl */ ddi_dma_flush, /* bus_dma_flush */ ddi_dma_win, /* bus_dma_win */ ddi_dma_mctl, /* bus_dma_ctl */ scsi_hba_bus_ctl, /* bus_ctl */ ddi_bus_prop_op, /* bus_prop_op */ scsi_hba_get_eventcookie, /* bus_get_eventcookie */ scsi_hba_add_eventcall, /* bus_add_eventcall */ scsi_hba_remove_eventcall, /* bus_remove_eventcall */ scsi_hba_post_event, /* bus_post_event */ NULL, /* bus_intr_ctl */ scsi_hba_bus_config, /* bus_config */ scsi_hba_bus_unconfig, /* bus_unconfig */ NULL, /* bus_fm_init */ NULL, /* bus_fm_fini */ NULL, /* bus_fm_access_enter */ NULL, /* bus_fm_access_exit */ scsi_hba_bus_power /* bus_power */ }; static struct cb_ops scsi_hba_cbops = { scsi_hba_open, scsi_hba_close, nodev, /* strategy */ nodev, /* print */ nodev, /* dump */ nodev, /* read */ nodev, /* write */ scsi_hba_ioctl, /* ioctl */ nodev, /* devmap */ nodev, /* mmap */ nodev, /* segmap */ nochpoll, /* poll */ ddi_prop_op, /* prop_op */ NULL, /* stream */ D_NEW|D_MP|D_HOTPLUG, /* cb_flag */ CB_REV, /* rev */ nodev, /* int (*cb_aread)() */ nodev /* int (*cb_awrite)() */ }; /* * Called from _init() when loading scsi module */ void scsi_initialize_hba_interface() { mutex_init(&scsi_hba_mutex, NULL, MUTEX_DRIVER, NULL); mutex_init(&scsi_flag_nointr_mutex, NULL, MUTEX_DRIVER, NULL); cv_init(&scsi_flag_nointr_cv, NULL, CV_DRIVER, NULL); mutex_init(&scsi_log_mutex, NULL, MUTEX_DRIVER, NULL); } #ifdef NO_SCSI_FINI_YET /* * Called from _fini() when unloading scsi module */ void scsi_uninitialize_hba_interface() { mutex_destroy(&scsi_hba_mutex); cv_destroy(&scsi_flag_nointr_cv); mutex_destroy(&scsi_flag_nointr_mutex); mutex_destroy(&scsi_log_mutex); } #endif /* NO_SCSI_FINI_YET */ int scsi_hba_pkt_constructor(void *buf, void *arg, int kmflag) { struct scsi_pkt *pkt; scsi_hba_tran_t *tran = (scsi_hba_tran_t *)arg; int pkt_len; char *ptr; pkt = &((struct scsi_pkt_cache_wrapper *)buf)->pcw_pkt; /* * allocate a chunk of memory for the following: * scsi_pkt * pcw_* fields * pkt_ha_private * pkt_cdbp, if needed * (pkt_private always null) * pkt_scbp, if needed */ pkt_len = tran->tran_hba_len + sizeof (struct scsi_pkt_cache_wrapper); if (tran->tran_hba_flags & SCSI_HBA_TRAN_CDB) pkt_len += DEFAULT_CDBLEN; if (tran->tran_hba_flags & SCSI_HBA_TRAN_SCB) pkt_len += DEFAULT_SCBLEN; bzero(buf, pkt_len); ptr = buf; ptr += sizeof (struct scsi_pkt_cache_wrapper); pkt->pkt_ha_private = (opaque_t)ptr; /* * keep track of the granularity at the time this handle was * allocated */ ((struct scsi_pkt_cache_wrapper *)buf)->pcw_granular = tran->tran_dma_attr.dma_attr_granular; if (ddi_dma_alloc_handle(tran->tran_hba_dip, &tran->tran_dma_attr, kmflag == KM_SLEEP ? SLEEP_FUNC: NULL_FUNC, NULL, &pkt->pkt_handle) != DDI_SUCCESS) { return (-1); } ptr += tran->tran_hba_len; if (tran->tran_hba_flags & SCSI_HBA_TRAN_CDB) { pkt->pkt_cdbp = (opaque_t)ptr; ptr += DEFAULT_CDBLEN; } pkt->pkt_private = NULL; if (tran->tran_hba_flags & SCSI_HBA_TRAN_SCB) pkt->pkt_scbp = (opaque_t)ptr; if (tran->tran_pkt_constructor) return ((*tran->tran_pkt_constructor)(pkt, arg, kmflag)); else return (0); } #define P_TO_TRAN(pkt) ((pkt)->pkt_address.a_hba_tran) void scsi_hba_pkt_destructor(void *buf, void *arg) { struct scsi_pkt_cache_wrapper *pktw = buf; struct scsi_pkt *pkt = &(pktw->pcw_pkt); scsi_hba_tran_t *tran = (scsi_hba_tran_t *)arg; ASSERT((pktw->pcw_flags & PCW_BOUND) == 0); if (tran->tran_pkt_destructor) (*tran->tran_pkt_destructor)(pkt, arg); /* make sure nobody messed with our pointers */ ASSERT(pkt->pkt_ha_private == (opaque_t)((char *)pkt + sizeof (struct scsi_pkt_cache_wrapper))); ASSERT(((tran->tran_hba_flags & SCSI_HBA_TRAN_SCB) == 0) || (pkt->pkt_scbp == (opaque_t)((char *)pkt + tran->tran_hba_len + (((tran->tran_hba_flags & SCSI_HBA_TRAN_CDB) == 0) ? 0 : DEFAULT_CDBLEN) + DEFAULT_PRIVLEN + sizeof (struct scsi_pkt_cache_wrapper)))); ASSERT(((tran->tran_hba_flags & SCSI_HBA_TRAN_CDB) == 0) || (pkt->pkt_cdbp == (opaque_t)((char *)pkt + tran->tran_hba_len + sizeof (struct scsi_pkt_cache_wrapper)))); ASSERT(pkt->pkt_handle); ddi_dma_free_handle(&pkt->pkt_handle); pkt->pkt_handle = NULL; pkt->pkt_numcookies = 0; pktw->pcw_total_xfer = 0; pktw->pcw_totalwin = 0; pktw->pcw_curwin = 0; } /* * Called by an HBA from _init() */ int scsi_hba_init(struct modlinkage *modlp) { struct dev_ops *hba_dev_ops; /* * Get the devops structure of the hba, * and put our busops vector in its place. */ hba_dev_ops = ((struct modldrv *) (modlp->ml_linkage[0]))->drv_dev_ops; ASSERT(hba_dev_ops->devo_bus_ops == NULL); hba_dev_ops->devo_bus_ops = &scsi_hba_busops; /* * Provide getinfo and hotplugging ioctl if driver * does not provide them already */ if (hba_dev_ops->devo_cb_ops == NULL) { hba_dev_ops->devo_cb_ops = &scsi_hba_cbops; } if (hba_dev_ops->devo_cb_ops->cb_open == scsi_hba_open) { ASSERT(hba_dev_ops->devo_cb_ops->cb_close == scsi_hba_close); hba_dev_ops->devo_getinfo = scsi_hba_info; } return (0); } /* * Implement this older interface in terms of the new. * This is hardly in the critical path, so avoiding * unnecessary code duplication is more important. */ /*ARGSUSED*/ int scsi_hba_attach( dev_info_t *dip, ddi_dma_lim_t *hba_lim, scsi_hba_tran_t *hba_tran, int flags, void *hba_options) { ddi_dma_attr_t hba_dma_attr; bzero(&hba_dma_attr, sizeof (ddi_dma_attr_t)); hba_dma_attr.dma_attr_burstsizes = hba_lim->dlim_burstsizes; hba_dma_attr.dma_attr_minxfer = hba_lim->dlim_minxfer; return (scsi_hba_attach_setup(dip, &hba_dma_attr, hba_tran, flags)); } /* * Called by an HBA to attach an instance of the driver */ int scsi_hba_attach_setup( dev_info_t *dip, ddi_dma_attr_t *hba_dma_attr, scsi_hba_tran_t *hba_tran, int flags) { struct dev_ops *hba_dev_ops; struct scsi_hba_inst *elem; int value; int len; char *prop_name; const char *prop_value; char *errmsg = "scsi_hba_attach: cannot create property '%s' for %s%d\n"; static const char *interconnect[] = INTERCONNECT_TYPE_ASCII; /* * Link this instance into the scsi_hba_list */ elem = kmem_alloc(sizeof (struct scsi_hba_inst), KM_SLEEP); mutex_enter(&scsi_hba_mutex); elem->inst_dip = dip; elem->inst_hba_tran = hba_tran; elem->inst_next = NULL; elem->inst_prev = scsi_hba_list_tail; if (scsi_hba_list == NULL) { scsi_hba_list = elem; } if (scsi_hba_list_tail) { scsi_hba_list_tail->inst_next = elem; } scsi_hba_list_tail = elem; mutex_exit(&scsi_hba_mutex); /* * Save all the important HBA information that must be accessed * later by scsi_hba_bus_ctl(), and scsi_hba_map(). */ hba_tran->tran_hba_dip = dip; hba_tran->tran_hba_flags &= SCSI_HBA_TRAN_ALLOC; hba_tran->tran_hba_flags |= (flags & ~SCSI_HBA_TRAN_ALLOC); /* * Note: we only need dma_attr_minxfer and dma_attr_burstsizes * from the DMA attributes. scsi_hba_attach(9f) only * guarantees that these two fields are initialized properly. * If this changes, be sure to revisit the implementation * of scsi_hba_attach(9F). */ (void) memcpy(&hba_tran->tran_dma_attr, hba_dma_attr, sizeof (ddi_dma_attr_t)); /* create kmem_cache, if needed */ if (hba_tran->tran_setup_pkt) { char tmp[96]; int hbalen; int cmdlen = 0; int statuslen = 0; ASSERT(hba_tran->tran_init_pkt == NULL); ASSERT(hba_tran->tran_destroy_pkt == NULL); hba_tran->tran_init_pkt = scsi_init_cache_pkt; hba_tran->tran_destroy_pkt = scsi_free_cache_pkt; hba_tran->tran_sync_pkt = scsi_sync_cache_pkt; hba_tran->tran_dmafree = scsi_cache_dmafree; hbalen = ROUNDUP(hba_tran->tran_hba_len); if (flags & SCSI_HBA_TRAN_CDB) cmdlen = ROUNDUP(DEFAULT_CDBLEN); if (flags & SCSI_HBA_TRAN_SCB) statuslen = ROUNDUP(DEFAULT_SCBLEN); (void) snprintf(tmp, sizeof (tmp), "pkt_cache_%s_%d", ddi_driver_name(dip), ddi_get_instance(dip)); hba_tran->tran_pkt_cache_ptr = kmem_cache_create(tmp, sizeof (struct scsi_pkt_cache_wrapper) + hbalen + cmdlen + statuslen, 8, scsi_hba_pkt_constructor, scsi_hba_pkt_destructor, NULL, hba_tran, NULL, 0); } /* * Attach scsi configuration property parameters * to this instance of the hba. */ prop_name = "scsi-reset-delay"; len = 0; if (ddi_prop_op(DDI_DEV_T_ANY, dip, PROP_LEN, 0, prop_name, NULL, &len) == DDI_PROP_NOT_FOUND) { value = scsi_reset_delay; if (ddi_prop_update_int(DDI_MAJOR_T_UNKNOWN, dip, prop_name, value) != DDI_PROP_SUCCESS) { cmn_err(CE_CONT, errmsg, prop_name, ddi_get_name(dip), ddi_get_instance(dip)); } } prop_name = "scsi-tag-age-limit"; len = 0; if (ddi_prop_op(DDI_DEV_T_ANY, dip, PROP_LEN, 0, prop_name, NULL, &len) == DDI_PROP_NOT_FOUND) { value = scsi_tag_age_limit; if (ddi_prop_update_int(DDI_MAJOR_T_UNKNOWN, dip, prop_name, value) != DDI_PROP_SUCCESS) { cmn_err(CE_CONT, errmsg, prop_name, ddi_get_name(dip), ddi_get_instance(dip)); } } prop_name = "scsi-watchdog-tick"; len = 0; if (ddi_prop_op(DDI_DEV_T_ANY, dip, PROP_LEN, 0, prop_name, NULL, &len) == DDI_PROP_NOT_FOUND) { value = scsi_watchdog_tick; if (ddi_prop_update_int(DDI_MAJOR_T_UNKNOWN, dip, prop_name, value) != DDI_PROP_SUCCESS) { cmn_err(CE_CONT, errmsg, prop_name, ddi_get_name(dip), ddi_get_instance(dip)); } } prop_name = "scsi-options"; len = 0; if (ddi_prop_op(DDI_DEV_T_ANY, dip, PROP_LEN, 0, prop_name, NULL, &len) == DDI_PROP_NOT_FOUND) { value = scsi_options; if (ddi_prop_update_int(DDI_MAJOR_T_UNKNOWN, dip, prop_name, value) != DDI_PROP_SUCCESS) { cmn_err(CE_CONT, errmsg, prop_name, ddi_get_name(dip), ddi_get_instance(dip)); } } prop_name = "scsi-selection-timeout"; len = 0; if (ddi_prop_op(DDI_DEV_T_ANY, dip, PROP_LEN, 0, prop_name, NULL, &len) == DDI_PROP_NOT_FOUND) { value = scsi_selection_timeout; if (ddi_prop_update_int(DDI_MAJOR_T_UNKNOWN, dip, prop_name, value) != DDI_PROP_SUCCESS) { cmn_err(CE_CONT, errmsg, prop_name, ddi_get_name(dip), ddi_get_instance(dip)); } } if ((hba_tran->tran_hba_flags & SCSI_HBA_TRAN_ALLOC) && (hba_tran->tran_interconnect_type > 0) && (hba_tran->tran_interconnect_type < INTERCONNECT_MAX)) { prop_name = "initiator-interconnect-type"; len = 0; if (ddi_prop_op(DDI_DEV_T_ANY, dip, PROP_LEN, 0, prop_name, NULL, &len) == DDI_PROP_NOT_FOUND) { value = hba_tran->tran_interconnect_type; prop_value = interconnect[value]; if (ddi_prop_update_string(DDI_MAJOR_T_UNKNOWN, dip, prop_name, (char *)prop_value) != DDI_PROP_SUCCESS) { cmn_err(CE_CONT, errmsg, prop_name, ddi_get_name(dip), ddi_get_instance(dip)); } } } ddi_set_driver_private(dip, hba_tran); /* * Create devctl minor node unless driver supplied its own * open/close entry points */ hba_dev_ops = ddi_get_driver(dip); ASSERT(hba_dev_ops != NULL); if (hba_dev_ops->devo_cb_ops->cb_open == scsi_hba_open) { /* * Make sure that instance number doesn't overflow * when forming minor numbers. */ ASSERT(ddi_get_instance(dip) <= (L_MAXMIN >> INST_MINOR_SHIFT)); if ((ddi_create_minor_node(dip, "devctl", S_IFCHR, INST2DEVCTL(ddi_get_instance(dip)), DDI_NT_SCSI_NEXUS, 0) != DDI_SUCCESS) || (ddi_create_minor_node(dip, "scsi", S_IFCHR, INST2SCSI(ddi_get_instance(dip)), DDI_NT_SCSI_ATTACHMENT_POINT, 0) != DDI_SUCCESS)) { ddi_remove_minor_node(dip, "devctl"); ddi_remove_minor_node(dip, "scsi"); cmn_err(CE_WARN, "scsi_hba_attach: " "cannot create devctl/scsi minor nodes"); } } return (DDI_SUCCESS); } /* * Called by an HBA to detach an instance of the driver */ int scsi_hba_detach(dev_info_t *dip) { struct dev_ops *hba_dev_ops; scsi_hba_tran_t *hba; struct scsi_hba_inst *elem; hba = ddi_get_driver_private(dip); ddi_set_driver_private(dip, NULL); ASSERT(hba != NULL); ASSERT(hba->tran_open_flag == 0); hba_dev_ops = ddi_get_driver(dip); ASSERT(hba_dev_ops != NULL); if (hba_dev_ops->devo_cb_ops->cb_open == scsi_hba_open) { ddi_remove_minor_node(dip, "devctl"); ddi_remove_minor_node(dip, "scsi"); } /* * XXX - scsi_transport.h states that these data fields should not be * referenced by the HBA. However, to be consistent with * scsi_hba_attach(), they are being reset. */ hba->tran_hba_dip = (dev_info_t *)NULL; hba->tran_hba_flags = 0; (void) memset(&hba->tran_dma_attr, 0, sizeof (ddi_dma_attr_t)); if (hba->tran_pkt_cache_ptr != NULL) { kmem_cache_destroy(hba->tran_pkt_cache_ptr); hba->tran_pkt_cache_ptr = NULL; } /* * Remove HBA instance from scsi_hba_list */ mutex_enter(&scsi_hba_mutex); for (elem = scsi_hba_list; elem != (struct scsi_hba_inst *)NULL; elem = elem->inst_next) { if (elem->inst_dip == dip) break; } if (elem == (struct scsi_hba_inst *)NULL) { cmn_err(CE_CONT, "scsi_hba_attach: unknown HBA instance\n"); mutex_exit(&scsi_hba_mutex); return (DDI_FAILURE); } if (elem == scsi_hba_list) { scsi_hba_list = elem->inst_next; if (scsi_hba_list) { scsi_hba_list->inst_prev = (struct scsi_hba_inst *)NULL; } if (elem == scsi_hba_list_tail) { scsi_hba_list_tail = NULL; } } else if (elem == scsi_hba_list_tail) { scsi_hba_list_tail = elem->inst_prev; if (scsi_hba_list_tail) { scsi_hba_list_tail->inst_next = (struct scsi_hba_inst *)NULL; } } else { elem->inst_prev->inst_next = elem->inst_next; elem->inst_next->inst_prev = elem->inst_prev; } mutex_exit(&scsi_hba_mutex); kmem_free(elem, sizeof (struct scsi_hba_inst)); return (DDI_SUCCESS); } /* * Called by an HBA from _fini() */ void scsi_hba_fini(struct modlinkage *modlp) { struct dev_ops *hba_dev_ops; /* * Get the devops structure of this module * and clear bus_ops vector. */ hba_dev_ops = ((struct modldrv *) (modlp->ml_linkage[0]))->drv_dev_ops; if (hba_dev_ops->devo_cb_ops == &scsi_hba_cbops) { hba_dev_ops->devo_cb_ops = NULL; } if (hba_dev_ops->devo_getinfo == scsi_hba_info) { hba_dev_ops->devo_getinfo = NULL; } hba_dev_ops->devo_bus_ops = (struct bus_ops *)NULL; } /* * Generic bus_ctl operations for SCSI HBA's, * hiding the busctl interface from the HBA. */ /*ARGSUSED*/ static int scsi_hba_bus_ctl( dev_info_t *dip, dev_info_t *rdip, ddi_ctl_enum_t op, void *arg, void *result) { switch (op) { case DDI_CTLOPS_REPORTDEV: { struct scsi_device *devp; scsi_hba_tran_t *hba; hba = ddi_get_driver_private(dip); ASSERT(hba != NULL); devp = ddi_get_driver_private(rdip); if ((hba->tran_get_bus_addr == NULL) || (hba->tran_get_name == NULL)) { cmn_err(CE_CONT, "?%s%d at %s%d: target %x lun %x\n", ddi_driver_name(rdip), ddi_get_instance(rdip), ddi_driver_name(dip), ddi_get_instance(dip), devp->sd_address.a_target, devp->sd_address.a_lun); } else { char name[SCSI_MAXNAMELEN]; char bus_addr[SCSI_MAXNAMELEN]; if ((*hba->tran_get_name)(devp, name, SCSI_MAXNAMELEN) != 1) { return (DDI_FAILURE); } if ((*hba->tran_get_bus_addr)(devp, bus_addr, SCSI_MAXNAMELEN) != 1) { return (DDI_FAILURE); } cmn_err(CE_CONT, "?%s%d at %s%d: name %s, bus address %s\n", ddi_driver_name(rdip), ddi_get_instance(rdip), ddi_driver_name(dip), ddi_get_instance(dip), name, bus_addr); } return (DDI_SUCCESS); } case DDI_CTLOPS_IOMIN: { int val; scsi_hba_tran_t *hba; ddi_dma_attr_t *attr; hba = ddi_get_driver_private(dip); ASSERT(hba != NULL); attr = &hba->tran_dma_attr; val = *((int *)result); val = maxbit(val, attr->dma_attr_minxfer); /* * The 'arg' value of nonzero indicates 'streaming' * mode. If in streaming mode, pick the largest * of our burstsizes available and say that that * is our minimum value (modulo what minxfer is). */ *((int *)result) = maxbit(val, ((intptr_t)arg ? (1<dma_attr_burstsizes)-1) : (1<<(ddi_fls(attr->dma_attr_burstsizes)-1)))); return (ddi_ctlops(dip, rdip, op, arg, result)); } case DDI_CTLOPS_INITCHILD: { dev_info_t *child_dip = (dev_info_t *)arg; struct scsi_device *sd; char name[SCSI_MAXNAMELEN]; scsi_hba_tran_t *hba; dev_info_t *ndip; hba = ddi_get_driver_private(dip); /* * For a driver like fp with multiple upper-layer-protocols * it is possible for scsi_hba_init in _init to plumb SCSA * and have the load of fcp (which does scsi_hba_attach_setup) * to fail. In this case we may get here with a NULL hba. */ if (hba == NULL) return (DDI_FAILURE); sd = kmem_zalloc(sizeof (struct scsi_device), KM_SLEEP); /* * Clone transport structure if requested, so * the HBA can maintain target-specific info, if * necessary. At least all SCSI-3 HBAs will do this. */ if (hba->tran_hba_flags & SCSI_HBA_TRAN_CLONE) { scsi_hba_tran_t *clone = kmem_alloc(sizeof (scsi_hba_tran_t), KM_SLEEP); bcopy(hba, clone, sizeof (scsi_hba_tran_t)); hba = clone; hba->tran_sd = sd; } else { ASSERT(hba->tran_sd == NULL); } sd->sd_dev = child_dip; sd->sd_address.a_hba_tran = hba; /* * Make sure that HBA either supports both or none * of tran_get_name/tran_get_addr */ if ((hba->tran_get_name != NULL) || (hba->tran_get_bus_addr != NULL)) { if ((hba->tran_get_name == NULL) || (hba->tran_get_bus_addr == NULL)) { cmn_err(CE_CONT, "%s%d: should support both or none of " "tran_get_name and tran_get_bus_addr\n", ddi_get_name(dip), ddi_get_instance(dip)); goto failure; } } /* * In case HBA doesn't support tran_get_name/tran_get_bus_addr * (e.g. most pre-SCSI-3 HBAs), we have to continue * to provide old semantics. In case a HBA driver does * support it, a_target and a_lun fields of scsi_address * are not defined and will be 0 except for parallel bus. */ { int t_len; int targ = 0; int lun = 0; t_len = sizeof (targ); if (ddi_prop_op(DDI_DEV_T_ANY, child_dip, PROP_LEN_AND_VAL_BUF, DDI_PROP_DONTPASS | DDI_PROP_CANSLEEP, "target", (caddr_t)&targ, &t_len) != DDI_SUCCESS) { if (hba->tran_get_name == NULL) { kmem_free(sd, sizeof (struct scsi_device)); if (hba->tran_hba_flags & SCSI_HBA_TRAN_CLONE) { kmem_free(hba, sizeof (scsi_hba_tran_t)); } return (DDI_NOT_WELL_FORMED); } } t_len = sizeof (lun); (void) ddi_prop_op(DDI_DEV_T_ANY, child_dip, PROP_LEN_AND_VAL_BUF, DDI_PROP_DONTPASS | DDI_PROP_CANSLEEP, "lun", (caddr_t)&lun, &t_len); /* * If the HBA does not implement tran_get_name then it * doesn't have any hope of supporting a LUN >= 256. */ if (lun >= 256 && hba->tran_get_name == NULL) { goto failure; } /* * This is also to make sure that if someone plugs in * a SCSI-2 disks to a SCSI-3 parallel bus HBA, * his SCSI-2 target driver still continue to work. */ sd->sd_address.a_target = (ushort_t)targ; sd->sd_address.a_lun = (uchar_t)lun; } /* * In case HBA support tran_get_name (e.g. all SCSI-3 HBAs), * give it a chance to tell us the name. * If it doesn't support this entry point, a name will be * fabricated */ if (scsi_get_name(sd, name, SCSI_MAXNAMELEN) != 1) { goto failure; } /* * Prevent duplicate nodes. */ ndip = ndi_devi_find(dip, ddi_node_name(child_dip), name); if (ndip && (ndip != child_dip)) { goto failure; } ddi_set_name_addr(child_dip, name); /* * This is a grotty hack that allows direct-access * (non-scsi) drivers using this interface to * put its own vector in the 'a_hba_tran' field. * When the drivers are fixed, remove this hack. */ sd->sd_reserved = hba; /* * call hba's target init entry point if it exists */ if (hba->tran_tgt_init != NULL) { if ((*hba->tran_tgt_init) (dip, child_dip, hba, sd) != DDI_SUCCESS) { ddi_set_name_addr(child_dip, NULL); goto failure; } /* * Another grotty hack to undo initialization * some hba's think they have authority to * perform. * * XXX - Pending dadk_probe() semantics * change. (Re: 1171432) */ if (hba->tran_tgt_probe != NULL) sd->sd_inq = NULL; } mutex_init(&sd->sd_mutex, NULL, MUTEX_DRIVER, NULL); ddi_set_driver_private(child_dip, sd); return (DDI_SUCCESS); failure: kmem_free(sd, sizeof (struct scsi_device)); if (hba->tran_hba_flags & SCSI_HBA_TRAN_CLONE) { kmem_free(hba, sizeof (scsi_hba_tran_t)); } return (DDI_FAILURE); } case DDI_CTLOPS_UNINITCHILD: { struct scsi_device *sd; dev_info_t *child_dip = (dev_info_t *)arg; scsi_hba_tran_t *hba; hba = ddi_get_driver_private(dip); ASSERT(hba != NULL); sd = ddi_get_driver_private(child_dip); ASSERT(sd != NULL); if (hba->tran_hba_flags & SCSI_HBA_TRAN_CLONE) { /* * This is a grotty hack, continued. This * should be: * hba = sd->sd_address.a_hba_tran; */ hba = sd->sd_reserved; ASSERT(hba->tran_hba_flags & SCSI_HBA_TRAN_CLONE); ASSERT(hba->tran_sd == sd); } else { ASSERT(hba->tran_sd == NULL); } scsi_unprobe(sd); if (hba->tran_tgt_free != NULL) { (*hba->tran_tgt_free) (dip, child_dip, hba, sd); } mutex_destroy(&sd->sd_mutex); if (hba->tran_hba_flags & SCSI_HBA_TRAN_CLONE) { kmem_free(hba, sizeof (scsi_hba_tran_t)); } kmem_free(sd, sizeof (*sd)); ddi_set_driver_private(child_dip, NULL); ddi_set_name_addr(child_dip, NULL); return (DDI_SUCCESS); } case DDI_CTLOPS_SIDDEV: return (ndi_dev_is_persistent_node(rdip) ? DDI_SUCCESS : DDI_FAILURE); /* XXX these should be handled */ case DDI_CTLOPS_POWER: case DDI_CTLOPS_ATTACH: case DDI_CTLOPS_DETACH: return (DDI_SUCCESS); /* * These ops correspond to functions that "shouldn't" be called * by a SCSI target driver. So we whine when we're called. */ case DDI_CTLOPS_DMAPMAPC: case DDI_CTLOPS_REPORTINT: case DDI_CTLOPS_REGSIZE: case DDI_CTLOPS_NREGS: case DDI_CTLOPS_SLAVEONLY: case DDI_CTLOPS_AFFINITY: case DDI_CTLOPS_POKE: case DDI_CTLOPS_PEEK: cmn_err(CE_CONT, "%s%d: invalid op (%d) from %s%d\n", ddi_get_name(dip), ddi_get_instance(dip), op, ddi_get_name(rdip), ddi_get_instance(rdip)); return (DDI_FAILURE); /* * Everything else (e.g. PTOB/BTOP/BTOPR requests) we pass up */ default: return (ddi_ctlops(dip, rdip, op, arg, result)); } } /* * Called by an HBA to allocate a scsi_hba_tran structure */ /*ARGSUSED*/ scsi_hba_tran_t * scsi_hba_tran_alloc( dev_info_t *dip, int flags) { scsi_hba_tran_t *hba_tran; hba_tran = kmem_zalloc(sizeof (scsi_hba_tran_t), (flags & SCSI_HBA_CANSLEEP) ? KM_SLEEP : KM_NOSLEEP); hba_tran->tran_interconnect_type = INTERCONNECT_PARALLEL; hba_tran->tran_hba_flags |= SCSI_HBA_TRAN_ALLOC; return (hba_tran); } /* * Called by an HBA to free a scsi_hba_tran structure */ void scsi_hba_tran_free( scsi_hba_tran_t *hba_tran) { kmem_free(hba_tran, sizeof (scsi_hba_tran_t)); } /* * Private wrapper for scsi_pkt's allocated via scsi_hba_pkt_alloc() */ struct scsi_pkt_wrapper { struct scsi_pkt scsi_pkt; int pkt_wrapper_len; }; #if !defined(lint) _NOTE(SCHEME_PROTECTS_DATA("unique per thread", scsi_pkt_wrapper)) _NOTE(SCHEME_PROTECTS_DATA("Unshared Data", dev_ops)) #endif /* * Called by an HBA to allocate a scsi_pkt */ /*ARGSUSED*/ struct scsi_pkt * scsi_hba_pkt_alloc( dev_info_t *dip, struct scsi_address *ap, int cmdlen, int statuslen, int tgtlen, int hbalen, int (*callback)(caddr_t arg), caddr_t arg) { struct scsi_pkt *pkt; struct scsi_pkt_wrapper *hba_pkt; caddr_t p; int pktlen; /* * Sanity check */ if (callback != SLEEP_FUNC && callback != NULL_FUNC) { cmn_err(CE_PANIC, "scsi_hba_pkt_alloc: callback must be" " either SLEEP or NULL\n"); } /* * Round up so everything gets allocated on long-word boundaries */ cmdlen = ROUNDUP(cmdlen); tgtlen = ROUNDUP(tgtlen); hbalen = ROUNDUP(hbalen); statuslen = ROUNDUP(statuslen); pktlen = sizeof (struct scsi_pkt_wrapper) + cmdlen + tgtlen + hbalen + statuslen; hba_pkt = kmem_zalloc(pktlen, (callback == SLEEP_FUNC) ? KM_SLEEP : KM_NOSLEEP); if (hba_pkt == NULL) { ASSERT(callback == NULL_FUNC); return (NULL); } /* * Set up our private info on this pkt */ hba_pkt->pkt_wrapper_len = pktlen; pkt = &hba_pkt->scsi_pkt; p = (caddr_t)(hba_pkt + 1); /* * Set up pointers to private data areas, cdb, and status. */ if (hbalen > 0) { pkt->pkt_ha_private = (opaque_t)p; p += hbalen; } if (tgtlen > 0) { pkt->pkt_private = (opaque_t)p; p += tgtlen; } if (statuslen > 0) { pkt->pkt_scbp = (uchar_t *)p; p += statuslen; } if (cmdlen > 0) { pkt->pkt_cdbp = (uchar_t *)p; } /* * Initialize the pkt's scsi_address */ pkt->pkt_address = *ap; return (pkt); } /* * Called by an HBA to free a scsi_pkt */ /*ARGSUSED*/ void scsi_hba_pkt_free( struct scsi_address *ap, struct scsi_pkt *pkt) { kmem_free(pkt, ((struct scsi_pkt_wrapper *)pkt)->pkt_wrapper_len); } /* * Called by an HBA to map strings to capability indices */ int scsi_hba_lookup_capstr( char *capstr) { /* * Capability strings, masking the the '-' vs. '_' misery */ static struct cap_strings { char *cap_string; int cap_index; } cap_strings[] = { { "dma_max", SCSI_CAP_DMA_MAX }, { "dma-max", SCSI_CAP_DMA_MAX }, { "msg_out", SCSI_CAP_MSG_OUT }, { "msg-out", SCSI_CAP_MSG_OUT }, { "disconnect", SCSI_CAP_DISCONNECT }, { "synchronous", SCSI_CAP_SYNCHRONOUS }, { "wide_xfer", SCSI_CAP_WIDE_XFER }, { "wide-xfer", SCSI_CAP_WIDE_XFER }, { "parity", SCSI_CAP_PARITY }, { "initiator-id", SCSI_CAP_INITIATOR_ID }, { "untagged-qing", SCSI_CAP_UNTAGGED_QING }, { "tagged-qing", SCSI_CAP_TAGGED_QING }, { "auto-rqsense", SCSI_CAP_ARQ }, { "linked-cmds", SCSI_CAP_LINKED_CMDS }, { "sector-size", SCSI_CAP_SECTOR_SIZE }, { "total-sectors", SCSI_CAP_TOTAL_SECTORS }, { "geometry", SCSI_CAP_GEOMETRY }, { "reset-notification", SCSI_CAP_RESET_NOTIFICATION }, { "qfull-retries", SCSI_CAP_QFULL_RETRIES }, { "qfull-retry-interval", SCSI_CAP_QFULL_RETRY_INTERVAL }, { "scsi-version", SCSI_CAP_SCSI_VERSION }, { "interconnect-type", SCSI_CAP_INTERCONNECT_TYPE }, { "lun-reset", SCSI_CAP_LUN_RESET }, { "max-cdb-length", SCSI_CAP_CDB_LEN }, { NULL, 0 } }; struct cap_strings *cp; for (cp = cap_strings; cp->cap_string != NULL; cp++) { if (strcmp(cp->cap_string, capstr) == 0) { return (cp->cap_index); } } return (-1); } /* * Called by an HBA to determine if the system is in 'panic' state. */ int scsi_hba_in_panic() { return (panicstr != NULL); } /* * If a SCSI target driver attempts to mmap memory, * the buck stops here. */ /*ARGSUSED*/ static int scsi_hba_map_fault( dev_info_t *dip, dev_info_t *rdip, struct hat *hat, struct seg *seg, caddr_t addr, struct devpage *dp, pfn_t pfn, uint_t prot, uint_t lock) { return (DDI_FAILURE); } static int scsi_hba_get_eventcookie( dev_info_t *dip, dev_info_t *rdip, char *name, ddi_eventcookie_t *eventp) { scsi_hba_tran_t *hba; hba = ddi_get_driver_private(dip); if (hba->tran_get_eventcookie && ((*hba->tran_get_eventcookie)(dip, rdip, name, eventp) == DDI_SUCCESS)) { return (DDI_SUCCESS); } return (ndi_busop_get_eventcookie(dip, rdip, name, eventp)); } static int scsi_hba_add_eventcall( dev_info_t *dip, dev_info_t *rdip, ddi_eventcookie_t event, void (*callback)( dev_info_t *dip, ddi_eventcookie_t event, void *arg, void *bus_impldata), void *arg, ddi_callback_id_t *cb_id) { scsi_hba_tran_t *hba; hba = ddi_get_driver_private(dip); if (hba->tran_add_eventcall && ((*hba->tran_add_eventcall)(dip, rdip, event, callback, arg, cb_id) == DDI_SUCCESS)) { return (DDI_SUCCESS); } return (DDI_FAILURE); } static int scsi_hba_remove_eventcall(dev_info_t *devi, ddi_callback_id_t cb_id) { scsi_hba_tran_t *hba; ASSERT(cb_id); hba = ddi_get_driver_private(devi); if (hba->tran_remove_eventcall && ((*hba->tran_remove_eventcall)( devi, cb_id) == DDI_SUCCESS)) { return (DDI_SUCCESS); } return (DDI_FAILURE); } static int scsi_hba_post_event( dev_info_t *dip, dev_info_t *rdip, ddi_eventcookie_t event, void *bus_impldata) { scsi_hba_tran_t *hba; hba = ddi_get_driver_private(dip); if (hba->tran_post_event && ((*hba->tran_post_event)(dip, rdip, event, bus_impldata) == DDI_SUCCESS)) { return (DDI_SUCCESS); } return (DDI_FAILURE); } /* * The attach/detach of individual instances is controlled by the DDI * framework, hence, DDI_DEVT2DEVINFO doesn't make much sense (because * it ask drivers to hold individual dips in memory. */ static dev_info_t * devt_to_devinfo(dev_t dev) { dev_info_t *dip; struct devnames *dnp; major_t major = getmajor(dev); int instance = MINOR2INST(getminor(dev)); if (major >= devcnt) { return (NULL); } dnp = &devnamesp[major]; LOCK_DEV_OPS(&(dnp->dn_lock)); dip = dnp->dn_head; while (dip && (ddi_get_instance(dip) != instance)) { dip = ddi_get_next(dip); } UNLOCK_DEV_OPS(&(dnp->dn_lock)); return (dip); } /* * Default getinfo(9e) for scsi_hba */ /* ARGSUSED */ static int scsi_hba_info(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result) { int error = DDI_SUCCESS; switch (infocmd) { case DDI_INFO_DEVT2DEVINFO: *result = (void *)devt_to_devinfo((dev_t)arg); if (*result == NULL) { error = DDI_FAILURE; } break; case DDI_INFO_DEVT2INSTANCE: *result = (void *)(intptr_t)(MINOR2INST(getminor((dev_t)arg))); break; default: error = DDI_FAILURE; } return (error); } /* * Default open and close routine for scsi_hba */ /* ARGSUSED */ int scsi_hba_open(dev_t *devp, int flags, int otyp, cred_t *credp) { int rv = 0; dev_info_t *dip; scsi_hba_tran_t *hba; if (otyp != OTYP_CHR) return (EINVAL); dip = devt_to_devinfo(*devp); if (dip == NULL) return (ENXIO); if ((hba = ddi_get_driver_private(dip)) == NULL) return (ENXIO); /* * tran_open_flag bit field: * 0: closed * 1: shared open by minor at bit position * 1 at 31st bit: exclusive open */ mutex_enter(&(hba->tran_open_lock)); if (flags & FEXCL) { if (hba->tran_open_flag != 0) { rv = EBUSY; /* already open */ } else { hba->tran_open_flag = TRAN_OPEN_EXCL; } } else { if (hba->tran_open_flag == TRAN_OPEN_EXCL) { rv = EBUSY; /* already excl. open */ } else { int minor = getminor(*devp) & TRAN_MINOR_MASK; hba->tran_open_flag |= (1 << minor); /* * Ensure that the last framework reserved minor * is unused. Otherwise, the exclusive open * mechanism may break. */ ASSERT(minor != 31); } } mutex_exit(&(hba->tran_open_lock)); return (rv); } /* ARGSUSED */ int scsi_hba_close(dev_t dev, int flag, int otyp, cred_t *credp) { dev_info_t *dip; scsi_hba_tran_t *hba; if (otyp != OTYP_CHR) return (EINVAL); dip = devt_to_devinfo(dev); if (dip == NULL) return (ENXIO); if ((hba = ddi_get_driver_private(dip)) == NULL) return (ENXIO); mutex_enter(&(hba->tran_open_lock)); if (hba->tran_open_flag == TRAN_OPEN_EXCL) { hba->tran_open_flag = 0; } else { int minor = getminor(dev) & TRAN_MINOR_MASK; hba->tran_open_flag &= ~(1 << minor); } mutex_exit(&(hba->tran_open_lock)); return (0); } /* * standard ioctl commands for SCSI hotplugging */ /* ARGSUSED */ int scsi_hba_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, cred_t *credp, int *rvalp) { dev_info_t *self; dev_info_t *child; struct scsi_device *sd; scsi_hba_tran_t *hba; struct devctl_iocdata *dcp; uint_t bus_state; int rv = 0; int circ; self = devt_to_devinfo(dev); if (self == NULL) return (ENXIO); if ((hba = ddi_get_driver_private(self)) == NULL) return (ENXIO); /* * For these ioctls, the general implementation suffices */ switch (cmd) { case DEVCTL_DEVICE_GETSTATE: case DEVCTL_DEVICE_ONLINE: case DEVCTL_DEVICE_OFFLINE: case DEVCTL_DEVICE_REMOVE: case DEVCTL_BUS_GETSTATE: return (ndi_devctl_ioctl(self, cmd, arg, mode, 0)); } switch (cmd) { case DEVCTL_DEVICE_RESET: if (hba->tran_reset == NULL) { rv = ENOTSUP; break; } /* * read devctl ioctl data */ if (ndi_dc_allochdl((void *)arg, &dcp) != NDI_SUCCESS) return (EFAULT); if (ndi_dc_getname(dcp) == NULL || ndi_dc_getaddr(dcp) == NULL) { ndi_dc_freehdl(dcp); return (EINVAL); } ndi_devi_enter(self, &circ); child = ndi_devi_find(self, ndi_dc_getname(dcp), ndi_dc_getaddr(dcp)); if (child == NULL) { ndi_devi_exit(self, circ); ndi_dc_freehdl(dcp); return (ENXIO); } ndi_hold_devi(child); ndi_devi_exit(self, circ); /* * See DDI_CTLOPS_INITCHILD above */ sd = ddi_get_driver_private(child); if ((sd == NULL) || hba->tran_reset( &sd->sd_address, RESET_TARGET) == 0) { rv = EIO; } ndi_devi_enter(self, &circ); ndi_rele_devi(child); ndi_devi_exit(self, circ); ndi_dc_freehdl(dcp); break; case DEVCTL_BUS_QUIESCE: if ((ndi_get_bus_state(self, &bus_state) == NDI_SUCCESS) && (bus_state == BUS_QUIESCED)) { rv = EALREADY; break; } if (hba->tran_quiesce == NULL) { rv = ENOTSUP; } else if ((*hba->tran_quiesce)(self) != 0) { rv = EIO; } else { (void) ndi_set_bus_state(self, BUS_QUIESCED); } break; case DEVCTL_BUS_UNQUIESCE: if ((ndi_get_bus_state(self, &bus_state) == NDI_SUCCESS) && (bus_state == BUS_ACTIVE)) { rv = EALREADY; break; } if (hba->tran_unquiesce == NULL) { rv = ENOTSUP; } else if ((*hba->tran_unquiesce)(self) != 0) { rv = EIO; } else { (void) ndi_set_bus_state(self, BUS_ACTIVE); } break; case DEVCTL_BUS_RESET: /* * Use tran_bus_reset */ if (hba->tran_bus_reset == NULL) { rv = ENOTSUP; } else if ((*hba->tran_bus_reset)(self, RESET_BUS) == 0) { rv = EIO; } break; case DEVCTL_BUS_RESETALL: if (hba->tran_reset == NULL) { rv = ENOTSUP; break; } /* * Find a child's scsi_address and invoke tran_reset * * XXX If no child exists, one may to able to fake a child. * This will be a enhancement for the future. * For now, we fall back to BUS_RESET. */ ndi_devi_enter(self, &circ); child = ddi_get_child(self); sd = NULL; while (child) { if ((sd = ddi_get_driver_private(child)) != NULL) break; child = ddi_get_next_sibling(child); } if (sd != NULL) { ndi_hold_devi(child); ndi_devi_exit(self, circ); if ((*hba->tran_reset) (&sd->sd_address, RESET_ALL) == 0) { rv = EIO; } ndi_devi_enter(self, &circ); ndi_rele_devi(child); ndi_devi_exit(self, circ); } else { ndi_devi_exit(self, circ); if ((hba->tran_bus_reset == NULL) || ((*hba->tran_bus_reset)(self, RESET_BUS) == 0)) { rv = EIO; } } break; case DEVCTL_BUS_CONFIGURE: if (ndi_devi_config(self, NDI_DEVFS_CLEAN| NDI_DEVI_PERSIST|NDI_CONFIG_REPROBE) != NDI_SUCCESS) { rv = EIO; } break; case DEVCTL_BUS_UNCONFIGURE: if (ndi_devi_unconfig(self, NDI_DEVI_REMOVE|NDI_DEVFS_CLEAN) != NDI_SUCCESS) { rv = EBUSY; } break; default: rv = ENOTTY; } /* end of outer switch */ return (rv); } static int scsi_hba_bus_config(dev_info_t *parent, uint_t flag, ddi_bus_config_op_t op, void *arg, dev_info_t **childp) { scsi_hba_tran_t *hba; hba = ddi_get_driver_private(parent); if (hba && hba->tran_bus_config) { return (hba->tran_bus_config(parent, flag, op, arg, childp)); } /* * Force reprobe for BUS_CONFIG_ONE or when manually reconfiguring * via devfsadm(1m) to emulate deferred attach. * Reprobe only discovers driver.conf enumerated nodes, more * dynamic implementations probably require their own bus_config. */ if ((op == BUS_CONFIG_ONE) || (flag & NDI_DRV_CONF_REPROBE)) flag |= NDI_CONFIG_REPROBE; return (ndi_busop_bus_config(parent, flag, op, arg, childp, 0)); } static int scsi_hba_bus_unconfig(dev_info_t *parent, uint_t flag, ddi_bus_config_op_t op, void *arg) { scsi_hba_tran_t *hba; hba = ddi_get_driver_private(parent); if (hba && hba->tran_bus_unconfig) { return (hba->tran_bus_unconfig(parent, flag, op, arg)); } return (ndi_busop_bus_unconfig(parent, flag, op, arg)); } /* * Convert scsi ascii string data to NULL terminated (semi) legal IEEE 1275 * "compatible" (name) property form. * * For ASCII INQUIRY data, a one-way conversion algorithm is needed to take * SCSI_ASCII (20h - 7Eh) to a 1275-like compatible form. The 1275 spec allows * letters, digits, one ",", and ". _ + -", all limited by a maximum 31 * character length. Since ", ." are used as separators in the compatible * string itself, they are converted to "_". All SCSI_ASCII characters that * are illegal in 1275, as well as any illegal SCSI_ASCII characters * encountered, are converted to "_". To reduce length, trailing blanks are * trimmed from SCSI_ASCII fields prior to conversion. * * Example: SCSI_ASCII "ST32550W SUN2.1G" -> "ST32550W_SUN2_1G" * * NOTE: the 1275 string form is always less than or equal to the scsi form. */ static char * string_scsi_to_1275(char *s_1275, char *s_scsi, int len) { (void) strncpy(s_1275, s_scsi, len); s_1275[len--] = '\0'; while (len >= 0) { if (s_1275[len] == ' ') s_1275[len--] = '\0'; /* trim trailing " " */ else break; } while (len >= 0) { if (((s_1275[len] >= 'a') && (s_1275[len] <= 'z')) || ((s_1275[len] >= 'A') && (s_1275[len] <= 'Z')) || ((s_1275[len] >= '0') && (s_1275[len] <= '9')) || (s_1275[len] == '_') || (s_1275[len] == '+') || (s_1275[len] == '-')) len--; /* legal 1275 */ else s_1275[len--] = '_'; /* illegal SCSI_ASCII | 1275 */ } return (s_1275); } /* * Given the inquiry data, binding_set, and dtype_node for a scsi device, * return the nodename and compatible property for the device. The "compatible" * concept comes from IEEE-1275. The compatible information is returned is in * the correct form for direct use defining the "compatible" string array * property. Internally, "compatible" is also used to determine the nodename * to return. * * This function is provided as a separate entry point for use by drivers that * currently issue their own non-SCSA inquiry command and perform their own * node creation based their own private compiled in tables. Converting these * drivers to use this interface provides a quick easy way of obtaining * consistency as well as the flexibility associated with the 1275 techniques. * * The dtype_node is passed as a separate argument (instead of having the * implementation use inq_dtype). It indicates that information about * a secondary function embedded service should be produced. * * Callers must always use scsi_hba_nodename_compatible_free, even if * *nodenamep is null, to free the nodename and compatible information * when done. * * If a nodename can't be determined then **compatiblep will point to a * diagnostic string containing all the compatible forms. * * NOTE: some compatible strings may violate the 31 character restriction * imposed by IEEE-1275. This is not a problem because Solaris does not care * about this 31 character limit. * * The following compatible forms, in high to low precedence * order, are defined for SCSI target device nodes. * * scsiclass,DDEEFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (1 *1&2) * scsiclass,DDEE.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (2 *1) * scsiclass,DDFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (3 *2) * scsiclass,DD.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (4) * scsiclass,DDEEFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP (5 *1&2) * scsiclass,DDEE.vVVVVVVVV.pPPPPPPPPPPPPPPPP (6 *1) * scsiclass,DDFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP (7 *2) * scsiclass,DD.vVVVVVVVV.pPPPPPPPPPPPPPPPP (8) * scsa,DD.bBBBBBBBB (8.5 *3) * scsiclass,DDEEFFF (9 *1&2) * scsiclass,DDEE (10 *1) * scsiclass,DDFFF (11 *2) * scsiclass,DD (12) * scsiclass (13) * * *1 only produced on a secondary function node * *2 only produced on a node with flags * *3 only produces when binding-set legacy support is needed * * where: * * v is the letter 'v'. Denotest the * beginning of VVVVVVVV. * * VVVVVVVV Translated scsi_vendor. * * p is the letter 'p'. Denotes the * beginning of PPPPPPPPPPPPPPPP. * * PPPPPPPPPPPPPPPP Translated scsi_product. * * r is the letter 'r'. Denotes the * beginning of RRRR. * * RRRR Translated scsi_revision. * * DD is a two digit ASCII hexadecimal * number. The value of the two digits is * based one the SCSI "Peripheral device * type" command set associated with the * node. On a primary node this is the * scsi_dtype of the primary command set, * on a secondary node this is the * scsi_dtype associated with the embedded * function command set. * * EE Same encoding used for DD. This form is * only generated on secondary function * nodes. The DD function is embedded in * an EE device. * * FFF Concatenation, in alphabetical order, * of the flag characters below. The * following flag characters are defined: * * R Removable media: Used when * scsi_rmb is set. * * Forms using FFF are only be generated * if there are applicable flag * characters. * * b is the letter 'b'. Denotes the * beginning of BBBBBBBB. * * BBBBBBBB Binding-set. Operating System Specific: * scsi-binding-set property of HBA. */ #define NCOMPAT (1 + (8 + 1 + 5) + 1) #define COMPAT_LONGEST (strlen( \ "scsiclass,DDEEFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR" + 1)) void scsi_hba_nodename_compatible_get(struct scsi_inquiry *inq, char *binding_set, int dtype_node, char *compat0, char **nodenamep, char ***compatiblep, int *ncompatiblep) { char vid[sizeof (inq->inq_vid) + 1 ]; char pid[sizeof (inq->inq_pid) + 1]; char rev[sizeof (inq->inq_revision) + 1]; char f[sizeof ("ER")]; int dtype_device; int ncompat; /* number of compatible */ char **compatp; /* compatible ptrs */ int i; char *nname; /* nodename */ char *dname; /* driver name */ char **csp; char *p; int tlen; int len; major_t major; /* * Nodename_aliases: This table was originally designed to be * implemented via a new nodename_aliases file - a peer to the * driver_aliases that selects a nodename based on compatible * forms in much the same say driver_aliases is used to select * driver bindings from compatible forms. Each compatible form * is an 'alias'. Until a more general need for a * nodename_aliases file exists, which may never occur, the * scsi mappings are described here via a compiled in table. * * This table contains nodename mappings for self-identifying * scsi devices enumerated by the Solaris kernel. For a given * device, the highest precedence "compatible" form with a * mapping is used to select the nodename for the device. This * will typically be a generic nodename, however in some legacy * compatibility cases a driver nodename mapping may be selected. * * Because of possible breakage associated with switching SCSI * target devices from driver nodenames to generic nodenames, * we are currently unable to support generic nodenames for all * SCSI devices (binding-sets). Although /devices paths are * defined as unstable, avoiding possible breakage is * important. Some of the newer SCSI transports (USB) already * use generic nodenames. All new SCSI transports and target * devices should use generic nodenames. At times this decision * may be architecture dependent (sparc .vs. intel) based on when * a transport was supported on a particular architecture. * * We provide a base set of generic nodename mappings based on * scsiclass dtype and higher-precedence driver nodename * mappings based on scsa "binding-set" to cover legacy * issues. The binding-set is typically associated with * "scsi-binding-set" property value of the HBA. The legacy * mappings are provided independent of whether the driver they * refer to is installed. This allows a correctly named node * be created at discovery time, and binding to occur when/if * an add_drv of the legacy driver occurs. * * We also have mappings for legacy SUN hardware that * misidentifies itself (enclosure services which identify * themselves as processors). All future hardware should use * the correct dtype. * * As SCSI HBAs are modified to use the SCSA interfaces for * self-identifying SCSI target devices (PSARC/2004/116) the * nodename_aliases table (PSARC/2004/420) should be augmented * with legacy mappings in order to maintain compatibility with * existing /devices paths, especially for devices that house * an OS. Failure to do this may cause upgrade problems. * Additions for new target devices or transports should not * add scsa binding-set compatible mappings. */ static struct nodename_aliases { char *na_nodename; /* nodename */ char *na_alias; /* compatible form match */ } na[] = { /* # mapping to generic nodenames based on scsi dtype */ {"disk", "scsiclass,00"}, {"tape", "scsiclass,01"}, {"printer", "scsiclass,02"}, {"processor", "scsiclass,03"}, {"worm", "scsiclass,04"}, {"cdrom", "scsiclass,05"}, {"scanner", "scsiclass,06"}, {"optical-disk", "scsiclass,07"}, {"medium-changer", "scsiclass,08"}, {"obsolete", "scsiclass,09"}, {"prepress-a", "scsiclass,0a"}, {"prepress-b", "scsiclass,0b"}, {"array-controller", "scsiclass,0c"}, {"enclosure", "scsiclass,0d"}, {"disk", "scsiclass,0e"}, {"card-reader", "scsiclass,0f"}, {"bridge", "scsiclass,10"}, {"object-store", "scsiclass,11"}, {"reserved", "scsiclass,12"}, {"reserved", "scsiclass,13"}, {"reserved", "scsiclass,14"}, {"reserved", "scsiclass,15"}, {"reserved", "scsiclass,16"}, {"reserved", "scsiclass,17"}, {"reserved", "scsiclass,18"}, {"reserved", "scsiclass,19"}, {"reserved", "scsiclass,1a"}, {"reserved", "scsiclass,1b"}, {"reserved", "scsiclass,1c"}, {"reserved", "scsiclass,1d"}, {"well-known-lun", "scsiclass,1e"}, {"unknown", "scsiclass,1f"}, #ifdef sparc /* # legacy mapping to driver nodenames for fcp binding-set */ {"ssd", "scsa,00.bfcp"}, {"st", "scsa,01.bfcp"}, {"sgen", "scsa,08.bfcp"}, {"ses", "scsa,0d.bfcp"}, /* # legacy mapping to driver nodenames for vhci binding-set */ {"ssd", "scsa,00.bvhci"}, {"st", "scsa,01.bvhci"}, {"sgen", "scsa,08.bvhci"}, {"ses", "scsa,0d.bvhci"}, #else /* sparc */ /* # for x86 fcp and vhci use generic nodenames */ #endif /* sparc */ #ifdef notdef /* * The following binding-set specific mappings are not being * delivered at this time, but are listed here as an examples of * the type of mappings needed. */ /* # legacy mapping to driver nodenames for spi binding-set */ {"sd", "scsa,00.bspi"}, {"sd", "scsa,05.bspi"}, {"sd", "scsa,07.bspi"}, {"st", "scsa,01.bspi"}, {"ses", "scsa,0d.bspi"}, /* # SUN misidentified spi hardware */ {"ses", "scsiclass,03.vSUN.pD2"}, {"ses", "scsiclass,03.vSYMBIOS.pD1000"}, /* # legacy mapping to driver nodenames for atapi binding-set */ {"sd", "scsa,00.batapi"}, {"sd", "scsa,05.batapi"}, {"sd", "scsa,07.batapi"}, {"st", "scsa,01.batapi"}, {"unknown", "scsa,0d.batapi"}, /* # legacy mapping to generic nodenames for usb binding-set */ {"disk", "scsa,05.busb"}, {"disk", "scsa,07.busb"}, {"changer", "scsa,08.busb"}, {"comm", "scsa,09.busb"}, {"array_ctlr", "scsa,0c.busb"}, {"esi", "scsa,0d.busb"}, #endif /* notdef */ {NULL, NULL} }; struct nodename_aliases *nap; ASSERT(nodenamep && compatiblep && ncompatiblep && (binding_set == NULL || (strlen(binding_set) <= 8))); if ((nodenamep == NULL) || (compatiblep == NULL) || (ncompatiblep == NULL)) return; /* * In order to reduce runtime we allocate one block of memory that * contains both the NULL terminated array of pointers to compatible * forms and the individual compatible strings. This block is * somewhat larger than needed, but is short lived - it only exists * until the caller can transfer the information into the "compatible" * string array property and call scsi_hba_nodename_compatible_free. */ tlen = NCOMPAT * COMPAT_LONGEST; compatp = kmem_alloc((NCOMPAT * sizeof (char *)) + tlen, KM_SLEEP); /* convert inquiry data from SCSI ASCII to 1275 string */ (void) string_scsi_to_1275(vid, inq->inq_vid, sizeof (inq->inq_vid)); (void) string_scsi_to_1275(pid, inq->inq_pid, sizeof (inq->inq_pid)); (void) string_scsi_to_1275(rev, inq->inq_revision, sizeof (inq->inq_revision)); ASSERT((strlen(vid) <= sizeof (inq->inq_vid)) && (strlen(pid) <= sizeof (inq->inq_pid)) && (strlen(rev) <= sizeof (inq->inq_revision))); /* * Form flags alphabetically: * R - removable: * Set when inq_rmb is set and for well known scsi dtypes. For a * bus where the entire device is removable (like USB), we expect * the HBA to intercept the inquiry data and set inq_rmb. * Since OBP does not distinguish removable media in its generic * name selection we avoid setting the 'R' flag if the root is not * yet mounted. */ dtype_device = inq->inq_dtype & DTYPE_MASK; i = 0; if (rootvp && (inq->inq_rmb || (dtype_device == DTYPE_WORM) || (dtype_device == DTYPE_RODIRECT) || (dtype_device == DTYPE_OPTICAL))) f[i++] = 'R'; f[i] = '\0'; /* * Construct all applicable compatible forms. See comment at the * head of the function for a description of the compatible forms. */ csp = compatp; p = (char *)(compatp + NCOMPAT); /* ( 0) driver (optional, not documented in scsi(4)) */ if (compat0) { *csp++ = p; (void) snprintf(p, tlen, "%s", compat0); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 1) scsiclass,DDEEF.vV.pP.rR */ if ((dtype_device != dtype_node) && *f && *vid && *pid && *rev) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%02x%s.v%s.p%s.r%s", dtype_node, dtype_device, f, vid, pid, rev); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 2) scsiclass,DDEE.vV.pP.rR */ if ((dtype_device != dtype_node) && *vid && *pid && *rev) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%02x.v%s.p%s.r%s", dtype_node, dtype_device, vid, pid, rev); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 3) scsiclass,DDF.vV.pP.rR */ if (*f && *vid && *pid && *rev) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%s.v%s.p%s.r%s", dtype_node, f, vid, pid, rev); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 4) scsiclass,DD.vV.pP.rR */ if (*vid && *pid && rev) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x.v%s.p%s.r%s", dtype_node, vid, pid, rev); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 5) scsiclass,DDEEF.vV.pP */ if ((dtype_device != dtype_node) && *f && *vid && *pid) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%02x%s.v%s.p%s", dtype_node, dtype_device, f, vid, pid); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 6) scsiclass,DDEE.vV.pP */ if ((dtype_device != dtype_node) && *vid && *pid) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%02x.v%s.p%s", dtype_node, dtype_device, vid, pid); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 7) scsiclass,DDF.vV.pP */ if (*f && *vid && *pid) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%s.v%s.p%s", dtype_node, f, vid, pid); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 8) scsiclass,DD.vV.pP */ if (*vid && *pid) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x.v%s.p%s", dtype_node, vid, pid); len = strlen(p) + 1; p += len; tlen -= len; } /* (8.5) scsa,DD.bB (not documented in scsi(4)) */ if (binding_set) { *csp++ = p; (void) snprintf(p, tlen, "scsa,%02x.b%s", dtype_node, binding_set); len = strlen(p) + 1; p += len; tlen -= len; } /* ( 9) scsiclass,DDEEF */ if ((dtype_device != dtype_node) && *f) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%02x%s", dtype_node, dtype_device, f); len = strlen(p) + 1; p += len; tlen -= len; } /* (10) scsiclass,DDEEF */ if (dtype_device != dtype_node) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%02x", dtype_node, dtype_device); len = strlen(p) + 1; p += len; tlen -= len; } /* (11) scsiclass,DDF */ if (*f) { *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x%s", dtype_node, f); len = strlen(p) + 1; p += len; tlen -= len; } /* (12) scsiclass,DD */ *csp++ = p; (void) snprintf(p, tlen, "scsiclass,%02x", dtype_node); len = strlen(p) + 1; p += len; tlen -= len; /* (13) scsiclass */ *csp++ = p; (void) snprintf(p, tlen, "scsiclass"); len = strlen(p) + 1; p += len; tlen -= len; ASSERT(tlen >= 0); *csp = NULL; /* NULL terminate array of pointers */ ncompat = csp - compatp; /* * When determining a nodename, a nodename_aliases specified * mapping has precedence over using a driver_aliases specified * driver binding as a nodename. * * See if any of the compatible forms have a nodename_aliases * specified nodename. These mappings are described by * nodename_aliases entries like: * * disk "scsiclass,00" * enclosure "scsiclass,03.vSYMBIOS.pD1000" * ssd "scsa,00.bfcp" * * All nodename_aliases mappings should idealy be to generic * names, however a higher precedence legacy mapping to a * driver name may exist. The highest precedence mapping * provides the nodename, so legacy driver nodename mappings * (if they exist) take precedence over generic nodename * mappings. */ for (nname = NULL, csp = compatp; (nname == NULL) && *csp; csp++) { for (nap = na; nap->na_nodename; nap++) { if (strcmp(*csp, nap->na_alias) == 0) { nname = nap->na_nodename; break; } } } /* * If no nodename_aliases mapping exists then use the * driver_aliases specified driver binding as a nodename. * Determine the driver based on compatible (which may * have the passed in compat0 as the first item). The * driver_aliases file has entries like * * sd "scsiclass,00" * * that map compatible forms to specific drivers. These * entries are established by add_drv. We use the most specific * driver binding as the nodename. This matches the eventual * ddi_driver_compatible_major() binding that will be * established by bind_node() */ if (nname == NULL) { for (dname = NULL, csp = compatp; *csp; csp++) { major = ddi_name_to_major(*csp); if ((major == (major_t)-1) || (devnamesp[major].dn_flags & DN_DRIVER_REMOVED)) continue; if (dname = ddi_major_to_name(major)) break; } nname = dname; } /* return results */ if (nname) { *nodenamep = kmem_alloc(strlen(nname) + 1, KM_SLEEP); (void) strcpy(*nodenamep, nname); } else { *nodenamep = NULL; /* * If no nodename could be determined return a special * 'compatible' to be used for a diagnostic message. This * compatible contains all compatible forms concatenated * into a single string pointed to by the first element. */ if (nname == NULL) { for (csp = compatp; *(csp + 1); csp++) *((*csp) + strlen(*csp)) = ' '; *(compatp + 1) = NULL; ncompat = 1; } } *compatiblep = compatp; *ncompatiblep = ncompat; } /* Free allocations associated with scsi_hba_nodename_compatible_get use. */ void scsi_hba_nodename_compatible_free(char *nodename, char **compatible) { if (nodename) kmem_free(nodename, strlen(nodename) + 1); if (compatible) kmem_free(compatible, (NCOMPAT * sizeof (char *)) + (NCOMPAT * COMPAT_LONGEST)); } static int scsi_hba_bus_power(dev_info_t *parent, void *impl_arg, pm_bus_power_op_t op, void *arg, void *result) { scsi_hba_tran_t *hba; hba = ddi_get_driver_private(parent); if (hba && hba->tran_bus_power) { return (hba->tran_bus_power(parent, impl_arg, op, arg, result)); } return (pm_busop_bus_power(parent, impl_arg, op, arg, result)); }