/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */ /* All Rights Reserved */ /* * Pseudo Terminal Slave Driver. * * The pseudo-tty subsystem simulates a terminal connection, where the master * side represents the terminal and the slave represents the user process's * special device end point. The master device is set up as a cloned device * where its major device number is the major for the clone device and its minor * device number is the major for the ptm driver. There are no nodes in the file * system for master devices. The master pseudo driver is opened using the * open(2) system call with /dev/ptmx as the device parameter. The clone open * finds the next available minor device for the ptm major device. * * A master device is available only if it and its corresponding slave device * are not already open. When the master device is opened, the corresponding * slave device is automatically locked out. Only one open is allowed on a * master device. Multiple opens are allowed on the slave device. After both * the master and slave have been opened, the user has two file descriptors * which are the end points of a full duplex connection composed of two streams * which are automatically connected at the master and slave drivers. The user * may then push modules onto either side of the stream pair. * * The master and slave drivers pass all messages to their adjacent queues. * Only the M_FLUSH needs some processing. Because the read queue of one side * is connected to the write queue of the other, the FLUSHR flag is changed to * the FLUSHW flag and vice versa. When the master device is closed an M_HANGUP * message is sent to the slave device which will render the device * unusable. The process on the slave side gets the EIO when attempting to write * on that stream but it will be able to read any data remaining on the stream * head read queue. When all the data has been read, read() returns 0 * indicating that the stream can no longer be used. On the last close of the * slave device, a 0-length message is sent to the master device. When the * application on the master side issues a read() or getmsg() and 0 is returned, * the user of the master device decides whether to issue a close() that * dismantles the pseudo-terminal subsystem. If the master device is not closed, * the pseudo-tty subsystem will be available to another user to open the slave * device. * * Synchronization: * * All global data synchronization between ptm/pts is done via global * ptms_lock mutex which is initialized at system boot time from * ptms_initspace (called from space.c). * * Individual fields of pt_ttys structure (except ptm_rdq, pts_rdq and * pt_nullmsg) are protected by pt_ttys.pt_lock mutex. * * PT_ENTER_READ/PT_ENTER_WRITE are reference counter based read-write locks * which allow reader locks to be reacquired by the same thread (usual * reader/writer locks can't be used for that purpose since it is illegal for * a thread to acquire a lock it already holds, even as a reader). The sole * purpose of these macros is to guarantee that the peer queue will not * disappear (due to closing peer) while it is used. It is safe to use * PT_ENTER_READ/PT_EXIT_READ brackets across calls like putq/putnext (since * they are not real locks but reference counts). * * PT_ENTER_WRITE/PT_EXIT_WRITE brackets are used ONLY in master/slave * open/close paths to modify ptm_rdq and pts_rdq fields. These fields should * be set to appropriate queues *after* qprocson() is called during open (to * prevent peer from accessing the queue with incomplete plumbing) and set to * NULL before qprocsoff() is called during close. * * The pt_nullmsg field is only used in open/close routines and it is also * protected by PT_ENTER_WRITE/PT_EXIT_WRITE brackets to avoid extra mutex * holds. * * Lock Ordering: * * If both ptms_lock and per-pty lock should be held, ptms_lock should always * be entered first, followed by per-pty lock. * * See ptms.h, ptm.c and ptms_conf.c fore more information. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DEBUG int pts_debug = 0; #define DBG(a) if (pts_debug) cmn_err(CE_NOTE, a) #else #define DBG(a) #endif static int ptsopen(queue_t *, dev_t *, int, int, cred_t *); static int ptsclose(queue_t *, int, cred_t *); static void ptswput(queue_t *, mblk_t *); static void ptsrsrv(queue_t *); static void ptswsrv(queue_t *); /* * Slave Stream Pseudo Terminal Module: stream data structure definitions */ static struct module_info pts_info = { 0xface, "pts", 0, _TTY_BUFSIZ, _TTY_BUFSIZ, 128 }; static struct qinit ptsrint = { NULL, (int (*)()) ptsrsrv, ptsopen, ptsclose, NULL, &pts_info, NULL }; static struct qinit ptswint = { (int (*)()) ptswput, (int (*)()) ptswsrv, NULL, NULL, NULL, &pts_info, NULL }; static struct streamtab ptsinfo = { &ptsrint, &ptswint, NULL, NULL }; static int pts_devinfo(dev_info_t *, ddi_info_cmd_t, void *, void **); static int pts_attach(dev_info_t *, ddi_attach_cmd_t); static int pts_detach(dev_info_t *, ddi_detach_cmd_t); #define PTS_CONF_FLAG (D_NEW | D_MP) /* * this will define (struct cb_ops cb_pts_ops) and (struct dev_ops pts_ops) */ DDI_DEFINE_STREAM_OPS(pts_ops, nulldev, nulldev, \ pts_attach, pts_detach, nodev, \ pts_devinfo, PTS_CONF_FLAG, &ptsinfo, ddi_quiesce_not_supported); /* * Module linkage information for the kernel. */ static struct modldrv modldrv = { &mod_driverops, /* Type of module. This one is a pseudo driver */ "Slave Stream Pseudo Terminal driver 'pts'", &pts_ops, /* driver ops */ }; static struct modlinkage modlinkage = { MODREV_1, &modldrv, NULL }; int _init(void) { int rc; if ((rc = mod_install(&modlinkage)) == 0) ptms_init(); return (rc); } int _fini(void) { return (mod_remove(&modlinkage)); } int _info(struct modinfo *modinfop) { return (mod_info(&modlinkage, modinfop)); } static int pts_attach(dev_info_t *devi, ddi_attach_cmd_t cmd) { if (cmd != DDI_ATTACH) return (DDI_FAILURE); mutex_enter(&ptms_lock); pts_dip = devi; mutex_exit(&ptms_lock); return (DDI_SUCCESS); } /*ARGSUSED*/ static int pts_detach(dev_info_t *devi, ddi_detach_cmd_t cmd) { if (cmd != DDI_DETACH) return (DDI_FAILURE); /* * For now, pts cannot be detached. */ return (DDI_FAILURE); } /*ARGSUSED*/ static int pts_devinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result) { int error; switch (infocmd) { case DDI_INFO_DEVT2DEVINFO: if (pts_dip == NULL) { error = DDI_FAILURE; } else { *result = (void *)pts_dip; error = DDI_SUCCESS; } break; case DDI_INFO_DEVT2INSTANCE: *result = (void *)0; error = DDI_SUCCESS; break; default: error = DDI_FAILURE; } return (error); } /* ARGSUSED */ /* * Open the slave device. Reject a clone open and do not allow the * driver to be pushed. If the slave/master pair is locked or if * the master is not open, return EACCESS. * Upon success, store the write queue pointer in private data and * set the PTSOPEN bit in the pt_state field. */ static int ptsopen( queue_t *rqp, /* pointer to the read side queue */ dev_t *devp, /* pointer to stream tail's dev */ int oflag, /* the user open(2) supplied flags */ int sflag, /* open state flag */ cred_t *credp) /* credentials */ { struct pt_ttys *ptsp; mblk_t *mp; mblk_t *mop; /* ptr to a setopts message block */ minor_t dminor = getminor(*devp); struct stroptions *sop; DDBG("entering ptsopen(%d)", dminor); if (sflag != 0) { return (EINVAL); } mutex_enter(&ptms_lock); ptsp = ptms_minor2ptty(dminor); if (ptsp == NULL) { mutex_exit(&ptms_lock); return (ENXIO); } mutex_enter(&ptsp->pt_lock); /* * Prevent opens from zones other than the one blessed by ptm. We * can't even allow the global zone to open all pts's, as it would * otherwise inproperly be able to claim pts's already opened by zones. */ if (ptsp->pt_zoneid != getzoneid()) { mutex_exit(&ptsp->pt_lock); mutex_exit(&ptms_lock); return (EPERM); } /* * Allow reopen of this device. */ if (rqp->q_ptr != NULL) { ASSERT(rqp->q_ptr == ptsp); ASSERT(ptsp->pts_rdq == rqp); mutex_exit(&ptsp->pt_lock); mutex_exit(&ptms_lock); return (0); } DDBGP("ptsopen: p = %p\n", (uintptr_t)ptsp); DDBG("ptsopen: state = %x\n", ptsp->pt_state); ASSERT(ptsp->pt_minor == dminor); if ((ptsp->pt_state & PTLOCK) || !(ptsp->pt_state & PTMOPEN)) { mutex_exit(&ptsp->pt_lock); mutex_exit(&ptms_lock); return (EAGAIN); } /* * if already, open simply return... */ if (ptsp->pt_state & PTSOPEN) { ASSERT(rqp->q_ptr == ptsp); ASSERT(ptsp->pts_rdq == rqp); mutex_exit(&ptsp->pt_lock); mutex_exit(&ptms_lock); return (0); } /* * Allocate message block for setting stream head options. */ if ((mop = allocb(sizeof (struct stroptions), BPRI_MED)) == NULL) { mutex_exit(&ptsp->pt_lock); mutex_exit(&ptms_lock); return (ENOMEM); } /* * Slave should send zero-length message to a master when it is * closing. If memory is low at that time, master will not detect slave * closes, this pty will not be deallocated. So, preallocate this * zero-length message block early. */ if ((mp = allocb(0, BPRI_MED)) == NULL) { mutex_exit(&ptsp->pt_lock); mutex_exit(&ptms_lock); freemsg(mop); return (ENOMEM); } ptsp->pt_state |= PTSOPEN; WR(rqp)->q_ptr = rqp->q_ptr = ptsp; mutex_exit(&ptsp->pt_lock); mutex_exit(&ptms_lock); qprocson(rqp); /* * After qprocson pts driver is fully plumbed into the stream and can * send/receive messages. Setting pts_rdq will allow master side to send * messages to the slave. This setting can't occur before qprocson() is * finished because slave is not ready to process them. */ PT_ENTER_WRITE(ptsp); ptsp->pts_rdq = rqp; ASSERT(ptsp->pt_nullmsg == NULL); ptsp->pt_nullmsg = mp; PT_EXIT_WRITE(ptsp); /* * set up hi/lo water marks on stream head read queue * and add controlling tty if not set */ mop->b_datap->db_type = M_SETOPTS; mop->b_wptr += sizeof (struct stroptions); sop = (struct stroptions *)mop->b_rptr; sop->so_flags = SO_HIWAT | SO_LOWAT | SO_ISTTY; sop->so_hiwat = _TTY_BUFSIZ; sop->so_lowat = 256; putnext(rqp, mop); return (0); } /* * Find the address to private data identifying the slave's write * queue. Send a 0-length msg up the slave's read queue to designate * the master is closing. Uattach the master from the slave by nulling * out master's write queue field in private data. */ /*ARGSUSED1*/ static int ptsclose(queue_t *rqp, int flag, cred_t *credp) { struct pt_ttys *ptsp; queue_t *wqp; mblk_t *mp; mblk_t *bp; /* * q_ptr should never be NULL in the close routine and it is checked in * DEBUG kernel by ASSERT. For non-DEBUG kernel the attempt is made to * behave gracefully. */ ASSERT(rqp->q_ptr != NULL); if (rqp->q_ptr == NULL) { qprocsoff(rqp); return (0); } ptsp = (struct pt_ttys *)rqp->q_ptr; /* * Slave is going to close and doesn't want any new messages coming * from the master side, so set pts_rdq to NULL. This should be done * before call to qprocsoff() since slave can't process additional * messages from the master after qprocsoff is called. */ PT_ENTER_WRITE(ptsp); mp = ptsp->pt_nullmsg; ptsp->pt_nullmsg = NULL; ptsp->pts_rdq = NULL; PT_EXIT_WRITE(ptsp); /* * Drain the ouput */ wqp = WR(rqp); PT_ENTER_READ(ptsp); while ((bp = getq(wqp)) != NULL) { if (ptsp->ptm_rdq) { putnext(ptsp->ptm_rdq, bp); } else if (bp->b_datap->db_type == M_IOCTL) { bp->b_datap->db_type = M_IOCNAK; freemsg(bp->b_cont); bp->b_cont = NULL; qreply(wqp, bp); } else { freemsg(bp); } } /* * qenable master side write queue so that it can flush * its messages as slaves's read queue is going away */ if (ptsp->ptm_rdq) { if (mp) putnext(ptsp->ptm_rdq, mp); else qenable(WR(ptsp->ptm_rdq)); } else freemsg(mp); PT_EXIT_READ(ptsp); qprocsoff(rqp); rqp->q_ptr = NULL; WR(rqp)->q_ptr = NULL; ptms_close(ptsp, PTSOPEN | PTSTTY); return (0); } /* * The wput procedure will only handle flush messages. * All other messages are queued and the write side * service procedure sends them off to the master side. */ static void ptswput(queue_t *qp, mblk_t *mp) { struct pt_ttys *ptsp; struct iocblk *iocp; unsigned char type = mp->b_datap->db_type; DBG(("entering ptswput\n")); ASSERT(qp->q_ptr); ptsp = (struct pt_ttys *)qp->q_ptr; PT_ENTER_READ(ptsp); if (ptsp->ptm_rdq == NULL) { DBG(("in write put proc but no master\n")); /* * NAK ioctl as slave side read queue is gone. * Or else free the message. */ if (mp->b_datap->db_type == M_IOCTL) { mp->b_datap->db_type = M_IOCNAK; freemsg(mp->b_cont); mp->b_cont = NULL; qreply(qp, mp); } else freemsg(mp); PT_EXIT_READ(ptsp); return; } if (type >= QPCTL) { switch (type) { /* * if write queue request, flush slave's write * queue and send FLUSHR to ptm. If read queue * request, send FLUSHR to ptm. */ case M_FLUSH: DBG(("pts got flush request\n")); if (*mp->b_rptr & FLUSHW) { DBG(("got FLUSHW, flush pts write Q\n")); if (*mp->b_rptr & FLUSHBAND) /* * if it is a FLUSHBAND, do flushband. */ flushband(qp, *(mp->b_rptr + 1), FLUSHDATA); else flushq(qp, FLUSHDATA); *mp->b_rptr &= ~FLUSHW; if ((*mp->b_rptr & FLUSHR) == 0) { /* * FLUSHW only. Change to FLUSHR and putnext * to ptm, then we are done. */ *mp->b_rptr |= FLUSHR; if (ptsp->ptm_rdq) putnext(ptsp->ptm_rdq, mp); break; } else { mblk_t *nmp; /* It is a FLUSHRW. Duplicate the mblk */ nmp = copyb(mp); if (nmp) { /* * Change FLUSHW to FLUSHR before * putnext to ptm. */ DBG(("putnext nmp(FLUSHR) to ptm\n")); *nmp->b_rptr |= FLUSHR; if (ptsp->ptm_rdq) putnext(ptsp->ptm_rdq, nmp); } } } /* * Since the packet module will toss any * M_FLUSHES sent to the master's stream head * read queue, we simply turn it around here. */ if (*mp->b_rptr & FLUSHR) { ASSERT(RD(qp)->q_first == NULL); DBG(("qreply(qp) turning FLUSHR around\n")); qreply(qp, mp); } else { freemsg(mp); } break; case M_READ: /* Caused by ldterm - can not pass to master */ freemsg(mp); break; default: if (ptsp->ptm_rdq) putnext(ptsp->ptm_rdq, mp); break; } PT_EXIT_READ(ptsp); return; } switch (type) { case M_IOCTL: /* * For case PTSSTTY set the flag PTSTTY and ACK * the ioctl so that the user program can push * the associated modules to get tty semantics. * See bugid 4025044 */ iocp = (struct iocblk *)mp->b_rptr; switch (iocp->ioc_cmd) { default: break; case PTSSTTY: if (ptsp->pt_state & PTSTTY) { mp->b_datap->db_type = M_IOCNAK; iocp->ioc_error = EEXIST; } else { mp->b_datap->db_type = M_IOCACK; mutex_enter(&ptsp->pt_lock); ptsp->pt_state |= PTSTTY; mutex_exit(&ptsp->pt_lock); iocp->ioc_error = 0; } iocp->ioc_count = 0; qreply(qp, mp); PT_EXIT_READ(ptsp); return; } default: /* * send other messages to the master */ DBG(("put msg on slave's write queue\n")); (void) putq(qp, mp); break; } PT_EXIT_READ(ptsp); DBG(("return from ptswput()\n")); } /* * enable the write side of the master. This triggers the * master to send any messages queued on its write side to * the read side of this slave. */ static void ptsrsrv(queue_t *qp) { struct pt_ttys *ptsp; DBG(("entering ptsrsrv\n")); ASSERT(qp->q_ptr); ptsp = (struct pt_ttys *)qp->q_ptr; PT_ENTER_READ(ptsp); if (ptsp->ptm_rdq == NULL) { DBG(("in read srv proc but no master\n")); PT_EXIT_READ(ptsp); return; } qenable(WR(ptsp->ptm_rdq)); PT_EXIT_READ(ptsp); DBG(("leaving ptsrsrv\n")); } /* * If there are messages on this queue that can be sent to * master, send them via putnext(). Else, if queued messages * cannot be sent, leave them on this queue. If priority * messages on this queue, send them to master no matter what. */ static void ptswsrv(queue_t *qp) { struct pt_ttys *ptsp; queue_t *ptm_rdq; mblk_t *mp; DBG(("entering ptswsrv\n")); ASSERT(qp->q_ptr); ptsp = (struct pt_ttys *)qp->q_ptr; PT_ENTER_READ(ptsp); if (ptsp->ptm_rdq == NULL) { DBG(("in write srv proc but no master\n")); /* * Free messages on the write queue and send * NAK for any M_IOCTL type messages to wakeup * the user process waiting for ACK/NAK from * the ioctl invocation */ while ((mp = getq(qp)) != NULL) { if (mp->b_datap->db_type == M_IOCTL) { mp->b_datap->db_type = M_IOCNAK; freemsg(mp->b_cont); mp->b_cont = NULL; qreply(qp, mp); } else freemsg(mp); } PT_EXIT_READ(ptsp); return; } else { ptm_rdq = ptsp->ptm_rdq; } /* * while there are messages on this write queue... */ while ((mp = getq(qp)) != NULL) { /* * if don't have control message and cannot put * msg. on master's read queue, put it back on * this queue. */ if (mp->b_datap->db_type <= QPCTL && !bcanputnext(ptm_rdq, mp->b_band)) { DBG(("put msg. back on Q\n")); (void) putbq(qp, mp); break; } /* * else send the message up master's stream */ DBG(("send message to master\n")); putnext(ptm_rdq, mp); } DBG(("leaving ptswsrv\n")); PT_EXIT_READ(ptsp); }