/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * This file contains the common hotplug code that is used by Standard * PCIe and PCI HotPlug Controller code. * * NOTE: This file is compiled and delivered through misc/pcie module. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* Local functions prototype */ static int pcie_hp_list_occupants(dev_info_t *dip, void *arg); static int pcie_hp_register_port(dev_info_t *dip, dev_info_t *pdip, char *cn_name); static int pcie_hp_register_ports_for_dev(dev_info_t *dip, int device_num); static int pcie_hp_unregister_ports_cb(ddi_hp_cn_info_t *info, void *arg); static int pcie_hp_get_port_state(ddi_hp_cn_info_t *info, void *arg); static int pcie_hp_match_dev_func(dev_info_t *dip, void *hdl); static boolean_t pcie_hp_match_dev(dev_info_t *dip, int dev_num); static int pcie_hp_get_df_from_port_name(char *cn_name, int *dev_num, int *func_num); static int pcie_hp_create_port_name_num(dev_info_t *dip, ddi_hp_cn_info_t *cn_info); static int pcie_hp_check_hardware_existence(dev_info_t *dip, int dev_num, int func_num); /* * Global functions (called by other drivers/modules) */ /* * return description text for led state */ char * pcie_led_state_text(pcie_hp_led_state_t state) { switch (state) { case PCIE_HP_LED_ON: return (PCIEHPC_PROP_VALUE_ON); case PCIE_HP_LED_OFF: return (PCIEHPC_PROP_VALUE_OFF); case PCIE_HP_LED_BLINK: default: return (PCIEHPC_PROP_VALUE_BLINK); } } /* * return description text for slot condition */ char * pcie_slot_condition_text(ap_condition_t condition) { switch (condition) { case AP_COND_UNKNOWN: return (PCIEHPC_PROP_VALUE_UNKNOWN); case AP_COND_OK: return (PCIEHPC_PROP_VALUE_OK); case AP_COND_FAILING: return (PCIEHPC_PROP_VALUE_FAILING); case AP_COND_FAILED: return (PCIEHPC_PROP_VALUE_FAILED); case AP_COND_UNUSABLE: return (PCIEHPC_PROP_VALUE_UNUSABLE); default: return (PCIEHPC_PROP_VALUE_UNKNOWN); } } /* * routine to copy in a nvlist from userland */ int pcie_copyin_nvlist(char *packed_buf, size_t packed_sz, nvlist_t **nvlp) { int ret = DDI_SUCCESS; char *packed; nvlist_t *dest = NULL; if (packed_buf == NULL || packed_sz == 0) return (DDI_EINVAL); /* copyin packed nvlist */ if ((packed = kmem_alloc(packed_sz, KM_SLEEP)) == NULL) return (DDI_ENOMEM); if (copyin(packed_buf, packed, packed_sz) != 0) { cmn_err(CE_WARN, "pcie_copyin_nvlist: copyin failed.\n"); ret = DDI_FAILURE; goto copyin_cleanup; } /* unpack packed nvlist */ if ((ret = nvlist_unpack(packed, packed_sz, &dest, KM_SLEEP)) != 0) { cmn_err(CE_WARN, "pcie_copyin_nvlist: nvlist_unpack " "failed with err %d\n", ret); switch (ret) { case EINVAL: case ENOTSUP: ret = DDI_EINVAL; goto copyin_cleanup; case ENOMEM: ret = DDI_ENOMEM; goto copyin_cleanup; default: ret = DDI_FAILURE; goto copyin_cleanup; } } *nvlp = dest; copyin_cleanup: kmem_free(packed, packed_sz); return (ret); } /* * routine to copy out a nvlist to userland */ int pcie_copyout_nvlist(nvlist_t *nvl, char *packed_buf, size_t *buf_sz) { int err = 0; char *buf = NULL; size_t packed_sz; if (nvl == NULL || packed_buf == NULL || buf_sz == NULL) return (DDI_EINVAL); /* pack nvlist, the library will allocate memory */ if ((err = nvlist_pack(nvl, &buf, &packed_sz, NV_ENCODE_NATIVE, 0)) != 0) { cmn_err(CE_WARN, "pcie_copyout_nvlist: nvlist_pack " "failed with err %d\n", err); switch (err) { case EINVAL: case ENOTSUP: return (DDI_EINVAL); case ENOMEM: return (DDI_ENOMEM); default: return (DDI_FAILURE); } } if (packed_sz > *buf_sz) { return (DDI_EINVAL); } /* copyout packed nvlist */ if (copyout(buf, packed_buf, packed_sz) != 0) { cmn_err(CE_WARN, "pcie_copyout_nvlist: copyout " "failed.\n"); kmem_free(buf, packed_sz); return (DDI_FAILURE); } *buf_sz = packed_sz; kmem_free(buf, packed_sz); return (DDI_SUCCESS); } /* * init bus_hp_op entry and init hotpluggable slots & virtual ports */ int pcie_hp_init(dev_info_t *dip, caddr_t arg) { pcie_bus_t *bus_p = PCIE_DIP2BUS(dip); int ret = DDI_SUCCESS, count; dev_info_t *cdip; if (PCIE_IS_PCIE_HOTPLUG_CAPABLE(bus_p)) { /* Init hotplug controller */ ret = pciehpc_init(dip, arg); } else if (PCIE_IS_PCI_HOTPLUG_CAPABLE(bus_p)) { ret = pcishpc_init(dip); } if (ret != DDI_SUCCESS) { cmn_err(CE_WARN, "pcie_hp_init: initialize hotplug " "controller failed with %d\n", ret); return (ret); } ndi_devi_enter(dip, &count); /* Create port for the first level children */ cdip = ddi_get_child(dip); while (cdip != NULL) { if ((ret = pcie_hp_register_port(cdip, dip, NULL)) != DDI_SUCCESS) { /* stop and cleanup */ break; } cdip = ddi_get_next_sibling(cdip); } ndi_devi_exit(dip, count); if (ret != DDI_SUCCESS) { cmn_err(CE_WARN, "pcie_hp_init: initialize virtual " "hotplug port failed with %d\n", ret); (void) pcie_hp_uninit(dip); return (ret); } return (DDI_SUCCESS); } /* * uninit the hotpluggable slots and virtual ports */ int pcie_hp_uninit(dev_info_t *dip) { pcie_bus_t *bus_p = PCIE_DIP2BUS(dip); pcie_hp_unreg_port_t arg; /* * Must set arg.rv to NDI_SUCCESS so that if there's no port * under this dip, we still return success thus the bridge * driver can be successfully detached. * * Note that during the probe PCI configurator calls * ndi_devi_offline() to detach driver for a new probed bridge, * so that it can reprogram the resources for the bridge, * ndi_devi_offline() calls into pcieb_detach() which in turn * calls into this function. In this case there are no ports * created under a new probe bridge dip, as ports are only * created after the configurator finishing probing, thus the * ndi_hp_walk_cn() will see no ports when this is called * from the PCI configurtor. */ arg.nexus_dip = dip; arg.connector_num = DDI_HP_CN_NUM_NONE; arg.rv = NDI_SUCCESS; /* tear down all virtual hotplug handles */ ndi_hp_walk_cn(dip, pcie_hp_unregister_ports_cb, &arg); if (arg.rv != NDI_SUCCESS) return (DDI_FAILURE); if (PCIE_IS_PCIE_HOTPLUG_ENABLED(bus_p)) (void) pciehpc_uninit(dip); else if (PCIE_IS_PCI_HOTPLUG_ENABLED(bus_p)) (void) pcishpc_uninit(dip); return (DDI_SUCCESS); } /* * interrupt handler */ int pcie_hp_intr(dev_info_t *dip) { pcie_bus_t *bus_p = PCIE_DIP2BUS(dip); int ret = DDI_INTR_UNCLAIMED; if (PCIE_IS_PCIE_HOTPLUG_ENABLED(bus_p)) ret = pciehpc_intr(dip); else if (PCIE_IS_PCI_HOTPLUG_ENABLED(bus_p)) ret = pcishpc_intr(dip); return (ret); } /* * Probe the given PCIe/PCI Hotplug Connection (CN). */ /*ARGSUSED*/ int pcie_hp_probe(pcie_hp_slot_t *slot_p) { pcie_hp_ctrl_t *ctrl_p = slot_p->hs_ctrl; dev_info_t *dip = ctrl_p->hc_dip; /* * Call the configurator to probe a given PCI hotplug * Hotplug Connection (CN). */ if (pcicfg_configure(dip, slot_p->hs_device_num, PCICFG_ALL_FUNC, 0) != PCICFG_SUCCESS) { PCIE_DBG("pcie_hp_probe() failed\n"); return (DDI_FAILURE); } slot_p->hs_condition = AP_COND_OK; pcie_hp_create_occupant_props(dip, makedevice(ddi_driver_major(dip), slot_p->hs_minor), slot_p->hs_device_num); /* * Create ports for the newly probed devices. * Note, this is only for the first level children because the * descendants' ports will be created during bridge driver attach. */ return (pcie_hp_register_ports_for_dev(dip, slot_p->hs_device_num)); } /* * Unprobe the given PCIe/PCI Hotplug Connection (CN): * 1. remove all child device nodes * 2. unregister all dependent ports */ /*ARGSUSED*/ int pcie_hp_unprobe(pcie_hp_slot_t *slot_p) { pcie_hp_ctrl_t *ctrl_p = slot_p->hs_ctrl; dev_info_t *dip = ctrl_p->hc_dip; pcie_hp_unreg_port_t arg; /* * Call the configurator to unprobe a given PCI hotplug * Hotplug Connection (CN). */ if (pcicfg_unconfigure(dip, slot_p->hs_device_num, PCICFG_ALL_FUNC, 0) != PCICFG_SUCCESS) { PCIE_DBG("pcie_hp_unprobe() failed\n"); return (DDI_FAILURE); } slot_p->hs_condition = AP_COND_UNKNOWN; pcie_hp_delete_occupant_props(dip, makedevice(ddi_driver_major(dip), slot_p->hs_minor)); /* * Remove ports for the unprobed devices. * Note, this is only for the first level children because the * descendants' ports were already removed during bridge driver dettach. */ arg.nexus_dip = dip; arg.connector_num = slot_p->hs_info.cn_num; arg.rv = NDI_SUCCESS; ndi_hp_walk_cn(dip, pcie_hp_unregister_ports_cb, &arg); return (arg.rv == NDI_SUCCESS) ? (DDI_SUCCESS) : (DDI_FAILURE); } /* Read-only probe: no hardware register programming. */ int pcie_read_only_probe(dev_info_t *dip, char *cn_name, dev_info_t **pcdip) { long dev, func; int ret; char *sp; dev_info_t *cdip; *pcdip = NULL; /* * Parse the string of a pci Port name and get the device number * and function number. */ if (ddi_strtol(cn_name + 4, &sp, 10, &dev) != 0) return (DDI_EINVAL); if (ddi_strtol(sp + 1, NULL, 10, &func) != 0) return (DDI_EINVAL); ret = pcicfg_configure(dip, (int)dev, (int)func, PCICFG_FLAG_READ_ONLY); if (ret == PCICFG_SUCCESS) { cdip = pcie_hp_devi_find(dip, (int)dev, (int)func); *pcdip = cdip; } return (ret); } /* Read-only unprobe: no hardware register programming. */ int pcie_read_only_unprobe(dev_info_t *dip, char *cn_name) { long dev, func; int ret; char *sp; /* * Parse the string of a pci Port name and get the device number * and function number. */ if (ddi_strtol(cn_name + 4, &sp, 10, &dev) != 0) return (DDI_EINVAL); if (ddi_strtol(sp + 1, NULL, 10, &func) != 0) return (DDI_EINVAL); ret = pcicfg_unconfigure(dip, (int)dev, (int)func, PCICFG_FLAG_READ_ONLY); return (ret); } /* Control structure used to find a device in the devinfo tree */ struct pcie_hp_find_ctrl { uint_t device; uint_t function; dev_info_t *dip; }; /* * find a devinfo node with specified device and function number * in the device tree under 'dip' */ dev_info_t * pcie_hp_devi_find(dev_info_t *dip, uint_t device, uint_t function) { struct pcie_hp_find_ctrl ctrl; int count; ctrl.device = device; ctrl.function = function; ctrl.dip = NULL; ndi_devi_enter(dip, &count); ddi_walk_devs(ddi_get_child(dip), pcie_hp_match_dev_func, (void *)&ctrl); ndi_devi_exit(dip, count); return (ctrl.dip); } /* * routine to create 'pci-occupant' property for a hotplug slot */ void pcie_hp_create_occupant_props(dev_info_t *dip, dev_t dev, int pci_dev) { pcie_bus_t *bus_p = PCIE_DIP2BUS(dip); pcie_hp_ctrl_t *ctrl_p = (pcie_hp_ctrl_t *)bus_p->bus_hp_ctrl; pcie_hp_slot_t *slotp; pcie_hp_cn_cfg_t cn_cfg; pcie_hp_occupant_info_t *occupant; int circular, i; ndi_devi_enter(dip, &circular); if (PCIE_IS_PCIE_HOTPLUG_ENABLED(bus_p)) { slotp = (ctrl_p && (pci_dev == 0)) ? ctrl_p->hc_slots[pci_dev] : NULL; } else if (PCIE_IS_PCI_HOTPLUG_ENABLED(bus_p)) { if (ctrl_p) { int slot_num; slot_num = (ctrl_p->hc_device_increases) ? (pci_dev - ctrl_p->hc_device_start) : (pci_dev + ctrl_p->hc_device_start); slotp = ctrl_p->hc_slots[slot_num]; } else { slotp = NULL; } } if (slotp == NULL) return; occupant = kmem_alloc(sizeof (pcie_hp_occupant_info_t), KM_SLEEP); occupant->i = 0; cn_cfg.flag = B_FALSE; cn_cfg.rv = NDI_SUCCESS; cn_cfg.dip = NULL; cn_cfg.slotp = (void *)slotp; cn_cfg.cn_private = (void *)occupant; ddi_walk_devs(ddi_get_child(dip), pcie_hp_list_occupants, (void *)&cn_cfg); if (occupant->i == 0) { /* no occupants right now, need to create stub property */ char *c[] = { "" }; (void) ddi_prop_update_string_array(dev, dip, "pci-occupant", c, 1); } else { (void) ddi_prop_update_string_array(dev, dip, "pci-occupant", occupant->id, occupant->i); } for (i = 0; i < occupant->i; i++) kmem_free(occupant->id[i], sizeof (char[MAXPATHLEN])); kmem_free(occupant, sizeof (pcie_hp_occupant_info_t)); ndi_devi_exit(dip, circular); } /* * routine to remove 'pci-occupant' property for a hotplug slot */ void pcie_hp_delete_occupant_props(dev_info_t *dip, dev_t dev) { (void) ddi_prop_remove(dev, dip, "pci-occupant"); } /* * general code to create a minor node, called from hotplug controller * drivers. */ int pcie_create_minor_node(pcie_hp_ctrl_t *ctrl_p, int slot) { dev_info_t *dip = ctrl_p->hc_dip; pcie_hp_slot_t *slot_p = ctrl_p->hc_slots[slot]; ddi_hp_cn_info_t *info_p = &slot_p->hs_info; if (ddi_create_minor_node(dip, info_p->cn_name, S_IFCHR, slot_p->hs_minor, DDI_NT_PCI_ATTACHMENT_POINT, 0) != DDI_SUCCESS) { return (DDI_FAILURE); } (void) ddi_prop_update_int(DDI_DEV_T_NONE, dip, "ap-names", 1 << slot_p->hs_device_num); return (DDI_SUCCESS); } /* * general code to remove a minor node, called from hotplug controller * drivers. */ void pcie_remove_minor_node(pcie_hp_ctrl_t *ctrl_p, int slot) { ddi_remove_minor_node(ctrl_p->hc_dip, ctrl_p->hc_slots[slot]->hs_info.cn_name); } /* * Local functions (called within this file) */ /* * Register ports for all the children with device number device_num */ static int pcie_hp_register_ports_for_dev(dev_info_t *dip, int device_num) { dev_info_t *cdip; int rv; for (cdip = ddi_get_child(dip); cdip; cdip = ddi_get_next_sibling(cdip)) { if (pcie_hp_match_dev(cdip, device_num)) { /* * Found the newly probed device under the * current slot. Register a port for it. */ if ((rv = pcie_hp_register_port(cdip, dip, NULL)) != DDI_SUCCESS) return (rv); } else { continue; } } return (DDI_SUCCESS); } /* * Unregister ports of a pci bridge dip, get called from ndi_hp_walk_cn() * * If connector_num is specified, then unregister the slot's dependent ports * only; Otherwise, unregister all ports of a pci bridge dip. */ static int pcie_hp_unregister_ports_cb(ddi_hp_cn_info_t *info, void *arg) { pcie_hp_unreg_port_t *unreg_arg = (pcie_hp_unreg_port_t *)arg; dev_info_t *dip = unreg_arg->nexus_dip; int rv = NDI_SUCCESS; if (info->cn_type != DDI_HP_CN_TYPE_VIRTUAL_PORT) { unreg_arg->rv = rv; return (DDI_WALK_CONTINUE); } if (unreg_arg->connector_num != DDI_HP_CN_NUM_NONE) { /* Unregister ports for all unprobed devices under a slot. */ if (unreg_arg->connector_num == info->cn_num_dpd_on) { rv = ndi_hp_unregister(dip, info->cn_name); } } else { /* Unregister all ports of a pci bridge dip. */ rv = ndi_hp_unregister(dip, info->cn_name); } unreg_arg->rv = rv; if (rv == NDI_SUCCESS) return (DDI_WALK_CONTINUE); else return (DDI_WALK_TERMINATE); } /* * Find a port according to cn_name and get the port's state. */ static int pcie_hp_get_port_state(ddi_hp_cn_info_t *info, void *arg) { pcie_hp_port_state_t *port = (pcie_hp_port_state_t *)arg; if (info->cn_type != DDI_HP_CN_TYPE_VIRTUAL_PORT) return (DDI_WALK_CONTINUE); if (strcmp(info->cn_name, port->cn_name) == 0) { /* Matched. */ port->cn_state = info->cn_state; port->rv = DDI_SUCCESS; return (DDI_WALK_TERMINATE); } return (DDI_WALK_CONTINUE); } /* * Find the physical slot with the given device number; * return the slot if found. */ static pcie_hp_slot_t * pcie_find_physical_slot(dev_info_t *dip, int dev_num) { pcie_bus_t *bus_p = PCIE_DIP2BUS(dip); pcie_hp_ctrl_t *ctrl = PCIE_GET_HP_CTRL(dip); if (PCIE_IS_PCIE_HOTPLUG_CAPABLE(bus_p)) { /* PCIe has only one slot */ return (dev_num == 0) ? (ctrl->hc_slots[0]) : (NULL); } else if (PCIE_IS_PCI_HOTPLUG_CAPABLE(bus_p)) { for (int slot = 0; slot < ctrl->hc_num_slots_impl; slot++) { if (ctrl->hc_slots[slot]->hs_device_num == dev_num) { /* found */ return (ctrl->hc_slots[slot]); } } } return (NULL); } /* * setup slot name/slot-number info for the port which is being registered. */ static int pcie_hp_create_port_name_num(dev_info_t *dip, ddi_hp_cn_info_t *cn_info) { int ret, dev_num, func_num, name_len; dev_info_t *pdip = ddi_get_parent(dip); pcie_bus_t *bus_p = PCIE_DIP2BUS(pdip); pcie_hp_slot_t *slot; pcie_req_id_t bdf; char tmp[PCIE_HP_DEV_FUNC_NUM_STRING_LEN]; ret = pcie_get_bdf_from_dip(dip, &bdf); if (ret != DDI_SUCCESS) { return (ret); } if (PCIE_IS_RP(bus_p) || PCIE_IS_SWD(bus_p) || PCIE_IS_PCI2PCIE(bus_p)) { /* * It is under a PCIe device, devcie number is always 0; * function number might > 8 in ARI supported case. */ dev_num = 0; func_num = (bdf & ((~PCI_REG_BUS_M) >> 8)); } else { dev_num = (bdf & (PCI_REG_DEV_M >> 8)) >> 3; func_num = bdf & (PCI_REG_FUNC_M >> 8); } /* * The string length of dev_num and func_num must be no longer than 4 * including the string end mark. (With ARI case considered, e.g., * dev_num=0x0, func_num=0xff.) */ (void) snprintf(tmp, PCIE_HP_DEV_FUNC_NUM_STRING_LEN, "%x%x", dev_num, func_num); /* * Calculate the length of cn_name. * The format of pci port name is: pci.d,f * d stands for dev_num, f stands for func_num. So the length of the * name string can be calculated as following. */ name_len = strlen(tmp) + PCIE_HP_PORT_NAME_STRING_LEN + 1; cn_info->cn_name = (char *)kmem_zalloc(name_len, KM_SLEEP); (void) snprintf(cn_info->cn_name, name_len, "pci.%x,%x", dev_num, func_num); cn_info->cn_num = (dev_num << 8) | func_num; slot = pcie_find_physical_slot(pdip, dev_num); cn_info->cn_num_dpd_on = slot ? slot->hs_info.cn_num : DDI_HP_CN_NUM_NONE; return (DDI_SUCCESS); } /* * Extract device and function number from port name, whose format is * something like 'pci.1,0' */ static int pcie_hp_get_df_from_port_name(char *cn_name, int *dev_num, int *func_num) { int name_len, ret; long d, f; char *sp; /* some checks for the input name */ name_len = strlen(cn_name); if ((name_len <= PCIE_HP_PORT_NAME_STRING_LEN) || (name_len > (PCIE_HP_PORT_NAME_STRING_LEN + PCIE_HP_DEV_FUNC_NUM_STRING_LEN - 1)) || (strncmp("pci.", cn_name, 4) != 0)) { return (DDI_EINVAL); } ret = ddi_strtol(cn_name + 4, &sp, 10, &d); if (ret != DDI_SUCCESS) return (ret); if (strncmp(",", sp, 1) != 0) return (DDI_EINVAL); ret = ddi_strtol(sp + 1, NULL, 10, &f); if (ret != DDI_SUCCESS) return (ret); *dev_num = (int)d; *func_num = (int)f; return (ret); } /* * Check/copy cn_name and set connection numbers. * If it is a valid name, then setup cn_info for the newly created port. */ static int pcie_hp_setup_port_name_num(dev_info_t *pdip, char *cn_name, ddi_hp_cn_info_t *cn_info) { int dev_num, func_num, ret; pcie_hp_slot_t *slot; if ((ret = pcie_hp_get_df_from_port_name(cn_name, &dev_num, &func_num)) != DDI_SUCCESS) return (ret); if (pcie_hp_check_hardware_existence(pdip, dev_num, func_num) == DDI_SUCCESS) { cn_info->cn_state = DDI_HP_CN_STATE_PRESENT; } else { cn_info->cn_state = DDI_HP_CN_STATE_EMPTY; } cn_info->cn_name = ddi_strdup(cn_name, KM_SLEEP); cn_info->cn_num = (dev_num << 8) | func_num; slot = pcie_find_physical_slot(pdip, dev_num); if (slot) { cn_info->cn_num_dpd_on = slot->hs_info.cn_num; } else { cn_info->cn_num_dpd_on = DDI_HP_CN_NUM_NONE; } return (DDI_SUCCESS); } static int ndi2ddi(int n) { int ret; switch (n) { case NDI_SUCCESS: ret = DDI_SUCCESS; break; case NDI_NOMEM: ret = DDI_ENOMEM; break; case NDI_BUSY: ret = DDI_EBUSY; break; case NDI_EINVAL: ret = DDI_EINVAL; break; case NDI_ENOTSUP: ret = DDI_ENOTSUP; break; case NDI_FAILURE: default: ret = DDI_FAILURE; break; } return (ret); } /* * Common routine to create and register a new port * * Create an empty port if dip is NULL, and cn_name needs to be specified in * this case. Otherwise, create a port mapping to the specified dip, and cn_name * is not needed in this case. */ static int pcie_hp_register_port(dev_info_t *dip, dev_info_t *pdip, char *cn_name) { ddi_hp_cn_info_t *cn_info; int ret; ASSERT((dip == NULL) != (cn_name == NULL)); cn_info = kmem_zalloc(sizeof (ddi_hp_cn_info_t), KM_SLEEP); if (dip != NULL) ret = pcie_hp_create_port_name_num(dip, cn_info); else ret = pcie_hp_setup_port_name_num(pdip, cn_name, cn_info); if (ret != DDI_SUCCESS) { kmem_free(cn_info, sizeof (ddi_hp_cn_info_t)); return (ret); } cn_info->cn_child = dip; cn_info->cn_type = DDI_HP_CN_TYPE_VIRTUAL_PORT; cn_info->cn_type_str = DDI_HP_CN_TYPE_STR_PORT; ret = ndi_hp_register(pdip, cn_info); kmem_free(cn_info->cn_name, strlen(cn_info->cn_name) + 1); kmem_free(cn_info, sizeof (ddi_hp_cn_info_t)); return (ndi2ddi(ret)); } /* Check if there is a piece of hardware exist corresponding to the cn_name */ static int pcie_hp_check_hardware_existence(dev_info_t *dip, int dev_num, int func_num) { /* * VHPTODO: * According to device and function number, check if there is a hardware * device exists. Currently, this function can not be reached before * we enable state transition to or from "Port-Empty" or "Port-Present" * states. When the pci device type project is integrated, we are going * to call the pci config space access interfaces introduced by it. */ _NOTE(ARGUNUSED(dip, dev_num, func_num)); return (DDI_SUCCESS); } /* * Dispatch hotplug commands to different hotplug controller drivers, including * physical and virtual hotplug operations. */ /* ARGSUSED */ int pcie_hp_common_ops(dev_info_t *dip, char *cn_name, ddi_hp_op_t op, void *arg, void *result) { pcie_bus_t *bus_p = PCIE_DIP2BUS(dip); int ret = DDI_SUCCESS; PCIE_DBG("pcie_hp_common_ops: dip=%p cn_name=%s op=%x arg=%p\n", dip, cn_name, op, arg); switch (op) { case DDI_HPOP_CN_CREATE_PORT: { /* create an empty port */ return (pcie_hp_register_port(NULL, dip, cn_name)); } case DDI_HPOP_CN_CHANGE_STATE: { ddi_hp_cn_state_t curr_state; ddi_hp_cn_state_t target_state = *(ddi_hp_cn_state_t *)arg; pcie_hp_port_state_t state_arg; if (target_state < DDI_HP_CN_STATE_PORT_EMPTY) { /* this is for physical slot state change */ break; } PCIE_DBG("pcie_hp_common_ops: change port state" " dip=%p cn_name=%s" " op=%x arg=%p\n", (void *)dip, cn_name, op, arg); state_arg.rv = DDI_FAILURE; state_arg.cn_name = cn_name; ndi_hp_walk_cn(dip, pcie_hp_get_port_state, &state_arg); if (state_arg.rv != DDI_SUCCESS) { /* can not find the port */ return (DDI_EINVAL); } curr_state = state_arg.cn_state; /* * Check if this is for changing port's state: change to/from * PORT_EMPTY/PRESENT states. */ if (curr_state < target_state) { /* Upgrade state */ switch (curr_state) { case DDI_HP_CN_STATE_PORT_EMPTY: if (target_state == DDI_HP_CN_STATE_PORT_PRESENT) { int dev_num, func_num; ret = pcie_hp_get_df_from_port_name( cn_name, &dev_num, &func_num); if (ret != DDI_SUCCESS) goto port_state_done; ret = pcie_hp_check_hardware_existence( dip, dev_num, func_num); } else if (target_state == DDI_HP_CN_STATE_OFFLINE) { ret = pcie_read_only_probe(dip, cn_name, (dev_info_t **)result); } else ret = DDI_EINVAL; goto port_state_done; case DDI_HP_CN_STATE_PORT_PRESENT: if (target_state == DDI_HP_CN_STATE_OFFLINE) ret = pcie_read_only_probe(dip, cn_name, (dev_info_t **)result); else ret = DDI_EINVAL; goto port_state_done; default: ASSERT("unexpected state"); } } else { /* Downgrade state */ switch (curr_state) { case DDI_HP_CN_STATE_PORT_PRESENT: { int dev_num, func_num; ret = pcie_hp_get_df_from_port_name(cn_name, &dev_num, &func_num); if (ret != DDI_SUCCESS) goto port_state_done; ret = pcie_hp_check_hardware_existence(dip, dev_num, func_num); goto port_state_done; } case DDI_HP_CN_STATE_OFFLINE: ret = pcie_read_only_unprobe(dip, cn_name); goto port_state_done; default: ASSERT("unexpected state"); } } port_state_done: *(ddi_hp_cn_state_t *)result = curr_state; return (ret); } default: break; } if (PCIE_IS_PCIE_HOTPLUG_CAPABLE(bus_p)) { /* PCIe hotplug */ ret = pciehpc_hp_ops(dip, cn_name, op, arg, result); } else if (PCIE_IS_PCI_HOTPLUG_CAPABLE(bus_p)) { /* PCI SHPC hotplug */ ret = pcishpc_hp_ops(dip, cn_name, op, arg, result); } else { cmn_err(CE_WARN, "pcie_hp_common_ops: op is not supported." " dip=%p cn_name=%s" " op=%x arg=%p\n", (void *)dip, cn_name, op, arg); ret = DDI_ENOTSUP; } #if defined(__i386) || defined(__amd64) /* * like in attach, since hotplugging can change error registers, * we need to ensure that the proper bits are set on this port * after a configure operation */ if ((ret == DDI_SUCCESS) && (op == DDI_HPOP_CN_CHANGE_STATE) && (*(ddi_hp_cn_state_t *)arg == DDI_HP_CN_STATE_ENABLED)) pcieb_intel_error_workaround(dip); #endif return (ret); } /* * pcie_hp_match_dev_func: * Match dip's PCI device number and function number with input ones. */ static int pcie_hp_match_dev_func(dev_info_t *dip, void *hdl) { struct pcie_hp_find_ctrl *ctrl = (struct pcie_hp_find_ctrl *)hdl; pci_regspec_t *pci_rp; int length; int pci_dev, pci_func; if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "reg", (int **)&pci_rp, (uint_t *)&length) != DDI_PROP_SUCCESS) { ctrl->dip = NULL; return (DDI_WALK_TERMINATE); } /* get the PCI device address info */ pci_dev = PCI_REG_DEV_G(pci_rp->pci_phys_hi); pci_func = PCI_REG_FUNC_G(pci_rp->pci_phys_hi); /* * free the memory allocated by ddi_prop_lookup_int_array */ ddi_prop_free(pci_rp); if ((pci_dev == ctrl->device) && (pci_func == ctrl->function)) { /* found the match for the specified device address */ ctrl->dip = dip; return (DDI_WALK_TERMINATE); } /* * continue the walk to the next sibling to look for a match. */ return (DDI_WALK_PRUNECHILD); } /* * pcie_hp_match_dev: * Match the dip's pci device number with the input dev_num */ static boolean_t pcie_hp_match_dev(dev_info_t *dip, int dev_num) { pci_regspec_t *pci_rp; int length; int pci_dev; if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "reg", (int **)&pci_rp, (uint_t *)&length) != DDI_PROP_SUCCESS) { return (B_FALSE); } /* get the PCI device address info */ pci_dev = PCI_REG_DEV_G(pci_rp->pci_phys_hi); /* * free the memory allocated by ddi_prop_lookup_int_array */ ddi_prop_free(pci_rp); if (pci_dev == dev_num) { /* found the match for the specified device address */ return (B_TRUE); } return (B_FALSE); } /* * Callback function to match with device number in order to list * occupants under a specific slot */ static int pcie_hp_list_occupants(dev_info_t *dip, void *arg) { pcie_hp_cn_cfg_t *cn_cfg_p = (pcie_hp_cn_cfg_t *)arg; pcie_hp_occupant_info_t *occupant = (pcie_hp_occupant_info_t *)cn_cfg_p->cn_private; pcie_hp_slot_t *slot_p = (pcie_hp_slot_t *)cn_cfg_p->slotp; int pci_dev; pci_regspec_t *pci_rp; int length; major_t major; /* * Get the PCI device number information from the devinfo * node. Since the node may not have the address field * setup (this is done in the DDI_INITCHILD of the parent) * we look up the 'reg' property to decode that information. */ if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "reg", (int **)&pci_rp, (uint_t *)&length) != DDI_PROP_SUCCESS) { cn_cfg_p->rv = DDI_FAILURE; cn_cfg_p->dip = dip; return (DDI_WALK_TERMINATE); } /* get the pci device id information */ pci_dev = PCI_REG_DEV_G(pci_rp->pci_phys_hi); /* * free the memory allocated by ddi_prop_lookup_int_array */ ddi_prop_free(pci_rp); /* * Match the node for the device number of the slot. */ if (pci_dev == slot_p->hs_device_num) { major = ddi_driver_major(dip); /* * If the node is not yet attached, then don't list it * as an occupant. This is valid, since nothing can be * consuming it until it is attached, and cfgadm will * ask for the property explicitly which will cause it * to be re-freshed right before checking with rcm. */ if ((major == DDI_MAJOR_T_NONE) || !i_ddi_devi_attached(dip)) return (DDI_WALK_PRUNECHILD); /* * If we have used all our occupants then print mesage * and terminate walk. */ if (occupant->i >= PCIE_HP_MAX_OCCUPANTS) { cmn_err(CE_WARN, "pcie (%s%d): unable to list all occupants", ddi_driver_name(ddi_get_parent(dip)), ddi_get_instance(ddi_get_parent(dip))); return (DDI_WALK_TERMINATE); } /* * No need to hold the dip as ddi_walk_devs * has already arranged that for us. */ occupant->id[occupant->i] = kmem_alloc(sizeof (char[MAXPATHLEN]), KM_SLEEP); (void) ddi_pathname(dip, (char *)occupant->id[occupant->i]); occupant->i++; } /* * continue the walk to the next sibling to look for a match * or to find other nodes if this card is a multi-function card. */ return (DDI_WALK_PRUNECHILD); } /* * Generate the System Event for ESC_DR_REQ. * One of the consumers is pcidr, it calls to libcfgadm to perform a * configure or unconfigure operation to the AP. */ void pcie_hp_gen_sysevent_req(char *slot_name, int hint, dev_info_t *self, int kmflag) { sysevent_id_t eid; nvlist_t *ev_attr_list = NULL; char cn_path[MAXPATHLEN]; char *ap_id; int err, ap_id_len; /* * Minor device name (AP) will be bus path * concatenated with slot name */ (void) strcpy(cn_path, "/devices"); (void) ddi_pathname(self, cn_path + strlen("/devices")); ap_id_len = strlen(cn_path) + strlen(":") + strlen(slot_name) + 1; ap_id = kmem_zalloc(ap_id_len, kmflag); if (ap_id == NULL) { cmn_err(CE_WARN, "%s%d: Failed to allocate memory for AP ID: %s:%s", ddi_driver_name(self), ddi_get_instance(self), cn_path, slot_name); return; } (void) strcpy(ap_id, cn_path); (void) strcat(ap_id, ":"); (void) strcat(ap_id, slot_name); err = nvlist_alloc(&ev_attr_list, NV_UNIQUE_NAME_TYPE, kmflag); if (err != 0) { cmn_err(CE_WARN, "%s%d: Failed to allocate memory " "for event attributes%s", ddi_driver_name(self), ddi_get_instance(self), ESC_DR_REQ); kmem_free(ap_id, ap_id_len); return; } switch (hint) { case SE_INVESTIGATE_RES: /* fall through */ case SE_INCOMING_RES: /* fall through */ case SE_OUTGOING_RES: /* fall through */ err = nvlist_add_string(ev_attr_list, DR_REQ_TYPE, SE_REQ2STR(hint)); if (err != 0) { cmn_err(CE_WARN, "%s%d: Failed to add attr [%s] " "for %s event", ddi_driver_name(self), ddi_get_instance(self), DR_REQ_TYPE, ESC_DR_REQ); goto done; } break; default: cmn_err(CE_WARN, "%s%d: Unknown hint on sysevent", ddi_driver_name(self), ddi_get_instance(self)); goto done; } /* * Add attachment point as attribute (common attribute) */ err = nvlist_add_string(ev_attr_list, DR_AP_ID, ap_id); if (err != 0) { cmn_err(CE_WARN, "%s%d: Failed to add attr [%s] for %s event", ddi_driver_name(self), ddi_get_instance(self), DR_AP_ID, EC_DR); goto done; } /* * Log this event with sysevent framework. */ err = ddi_log_sysevent(self, DDI_VENDOR_SUNW, EC_DR, ESC_DR_REQ, ev_attr_list, &eid, ((kmflag == KM_SLEEP) ? DDI_SLEEP : DDI_NOSLEEP)); if (err != 0) { cmn_err(CE_WARN, "%s%d: Failed to log %s event", ddi_driver_name(self), ddi_get_instance(self), EC_DR); } done: nvlist_free(ev_attr_list); kmem_free(ap_id, ap_id_len); }