/* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #pragma ident "%Z%%M% %I% %E% SMI" /* * IEEE 802.11 generic handler */ #include #include #include #include #include #include #include "net80211_impl.h" uint32_t ieee80211_debug = 0x0; /* debug msg flags */ const char *ieee80211_phymode_name[] = { "auto", /* IEEE80211_MODE_AUTO */ "11a", /* IEEE80211_MODE_11A */ "11b", /* IEEE80211_MODE_11B */ "11g", /* IEEE80211_MODE_11G */ "FH", /* IEEE80211_MODE_FH */ "turboA", /* IEEE80211_MODE_TURBO_A */ "turboG", /* IEEE80211_MODE_TURBO_G */ }; #define IEEE80211_DPRINT(_level, _fmt) do { \ _NOTE(CONSTCOND) \ va_list ap; \ va_start(ap, (_fmt)); \ vcmn_err((_level), (_fmt), ap); \ va_end(ap); \ _NOTE(CONSTCOND) \ } while (0) /* * Print error messages */ void ieee80211_err(const int8_t *fmt, ...) { IEEE80211_DPRINT(CE_WARN, fmt); } /* * Print debug messages */ void ieee80211_dbg(uint32_t flag, const int8_t *fmt, ...) { if (flag & ieee80211_debug) IEEE80211_DPRINT(CE_CONT, fmt); } /* * Alloc memory, and save the size */ void * ieee80211_malloc(size_t size) { void *p = kmem_zalloc((size + 4), KM_SLEEP); *(int *)p = size; p = (char *)p + 4; return (p); } void ieee80211_free(void *p) { void *tp = (char *)p - 4; kmem_free((char *)p - 4, *(int *)tp + 4); } void ieee80211_mac_update(ieee80211com_t *ic) { wifi_data_t wd = { 0 }; ieee80211_node_t *in; /* * We can send data now; update the fastpath with our * current associated BSSID and other relevant settings. */ in = ic->ic_bss; wd.wd_secalloc = ieee80211_crypto_getciphertype(ic); wd.wd_opmode = ic->ic_opmode; IEEE80211_ADDR_COPY(wd.wd_bssid, in->in_bssid); (void) mac_pdata_update(ic->ic_mach, &wd, sizeof (wd)); mac_tx_update(ic->ic_mach); ieee80211_dbg(IEEE80211_MSG_ANY, "ieee80211_mac_update" "(cipher = %d)\n", wd.wd_secalloc); } /* * ieee80211_event_thread * open door of wpa, send event to wpad service */ static void ieee80211_event_thread(void *arg) { ieee80211com_t *ic = arg; door_handle_t event_door = NULL; /* Door for upcalls */ wl_events_t ev; door_arg_t darg; mutex_enter(&ic->ic_doorlock); ev.event = ic->ic_eventq[ic->ic_evq_head]; ic->ic_evq_head ++; if (ic->ic_evq_head >= MAX_EVENT) ic->ic_evq_head = 0; ieee80211_dbg(IEEE80211_MSG_DEBUG, "ieee80211_event(%d)\n", ev.event); /* * Locate the door used for upcalls */ if (door_ki_open(ic->ic_wpadoor, &event_door) != 0) { ieee80211_err("ieee80211_event: door_ki_open(%s) failed\n", ic->ic_wpadoor); goto out; } darg.data_ptr = (char *)&ev; darg.data_size = sizeof (wl_events_t); darg.desc_ptr = NULL; darg.desc_num = 0; darg.rbuf = NULL; darg.rsize = 0; if (door_ki_upcall(event_door, &darg) != 0) { ieee80211_err("ieee80211_event: door_ki_upcall() failed\n"); } if (event_door) { /* release our hold (if any) */ door_ki_rele(event_door); } out: mutex_exit(&ic->ic_doorlock); } /* * Notify state transition event message to WPA daemon */ void ieee80211_notify(ieee80211com_t *ic, wpa_event_type event) { if ((ic->ic_flags & IEEE80211_F_WPA) == 0) return; /* Not running on WPA mode */ ic->ic_eventq[ic->ic_evq_tail] = event; ic->ic_evq_tail ++; if (ic->ic_evq_tail >= MAX_EVENT) ic->ic_evq_tail = 0; /* async */ (void) timeout(ieee80211_event_thread, (void *)ic, 0); } /* * Default reset method for use with the ioctl support. This * method is invoked after any state change in the 802.11 * layer that should be propagated to the hardware but not * require re-initialization of the 802.11 state machine (e.g * rescanning for an ap). We always return ENETRESET which * should cause the driver to re-initialize the device. Drivers * can override this method to implement more optimized support. */ /* ARGSUSED */ static int ieee80211_default_reset(ieee80211com_t *ic) { return (ENETRESET); } /* * Convert channel to IEEE channel number. */ uint32_t ieee80211_chan2ieee(ieee80211com_t *ic, struct ieee80211_channel *ch) { if ((ic->ic_sup_channels <= ch) && (ch <= &ic->ic_sup_channels[IEEE80211_CHAN_MAX])) { return (ch - ic->ic_sup_channels); } else if (ch == IEEE80211_CHAN_ANYC) { return (IEEE80211_CHAN_ANY); } else if (ch != NULL) { ieee80211_err("invalid channel freq %u flags %x\n", ch->ich_freq, ch->ich_flags); return (0); } ieee80211_err("invalid channel (NULL)\n"); /* ch == NULL */ return (0); } /* * Convert IEEE channel number to MHz frequency. * chan IEEE channel number * flags specify whether the frequency is in the 2GHz ISM * band or the 5GHz band * * 802.11b 2GHz: 14 channels, each 5 MHz wide. Channel 1 is placed * at 2.412 GHz, channel 2 at 2.417 GHz, and so on up to channel 13 * at 2.472 GHz. Channel 14 was defined especially for operation in * Japan, and has a center frequency 2.484 GHz. * 802.11g 2GHz: adopts the frequency plan of 802.11b. Japan only * allows 802.11g operation in channels 1-13 * 802.11a 5GHz: starting every 5 MHz * 802.11b/g channels 15-24 (2512-2692) are used by some implementation * (Atheros etc.) */ uint32_t ieee80211_ieee2mhz(uint32_t chan, uint32_t flags) { if (flags & IEEE80211_CHAN_2GHZ) { /* 2GHz band */ if (chan == 14) return (2484); if (chan < 14) return (2412 + (chan - 1) * 5); else return (2512 + ((chan - 15) * 20)); } else if (flags & IEEE80211_CHAN_5GHZ) { /* 5Ghz band */ return (5000 + (chan * 5)); /* OFDM */ } else { /* either, guess */ if (chan == 14) return (2484); if (chan < 14) /* 0-13 */ return (2412 + (chan - 1) * 5); if (chan < 27) /* 15-26 */ return (2512 + ((chan - 15) * 20)); return (5000 + (chan * 5)); } } /* * Do late attach work. It must be called by the driver after * calling ieee80211_attach() and before calling most ieee80211 * functions. */ void ieee80211_media_init(ieee80211com_t *ic) { /* * Do late attach work that must wait for any subclass * (i.e. driver) work such as overriding methods. */ ieee80211_node_lateattach(ic); } /* * Start Watchdog timer. After count down timer(s), ic_watchdog * will be called */ void ieee80211_start_watchdog(ieee80211com_t *ic, uint32_t timer) { if (ic->ic_watchdog_timer == 0 && ic->ic_watchdog != NULL) { ic->ic_watchdog_timer = timeout(ic->ic_watchdog, ic, drv_usectohz(1000000 * timer)); } } /* * Stop watchdog timer. */ void ieee80211_stop_watchdog(ieee80211com_t *ic) { if (ic->ic_watchdog_timer != 0) { if (ic->ic_watchdog != NULL) (void) untimeout(ic->ic_watchdog_timer); ic->ic_watchdog_timer = 0; } } /* * Called from a driver's xxx_watchdog routine. It is used to * perform periodic cleanup of state for net80211, as well as * timeout scans. */ void ieee80211_watchdog(void *arg) { ieee80211com_t *ic = arg; struct ieee80211_impl *im = ic->ic_private; ieee80211_node_table_t *nt; int inact_timer = 0; if (ic->ic_state == IEEE80211_S_INIT) return; IEEE80211_LOCK(ic); if ((im->im_mgt_timer != 0) && (--im->im_mgt_timer == 0)) { IEEE80211_UNLOCK(ic); ieee80211_new_state(ic, IEEE80211_S_SCAN, -1); IEEE80211_LOCK(ic); } nt = &ic->ic_scan; if (nt->nt_inact_timer != 0) { if (--nt->nt_inact_timer == 0) nt->nt_timeout(nt); inact_timer += nt->nt_inact_timer; } nt = &ic->ic_sta; if (nt->nt_inact_timer != 0) { if (--nt->nt_inact_timer == 0) nt->nt_timeout(nt); inact_timer += nt->nt_inact_timer; } IEEE80211_UNLOCK(ic); if (im->im_mgt_timer != 0 || inact_timer > 0) ieee80211_start_watchdog(ic, 1); } /* * Set the current phy mode and recalculate the active channel * set and supported rates based on the available channels for * this mode. Also select a new BSS channel if the current one * is inappropriate for this mode. * This function is called by net80211, and not intended to be * called directly. */ static int ieee80211_setmode(ieee80211com_t *ic, enum ieee80211_phymode mode) { static const uint32_t chanflags[] = { 0, /* IEEE80211_MODE_AUTO */ IEEE80211_CHAN_A, /* IEEE80211_MODE_11A */ IEEE80211_CHAN_B, /* IEEE80211_MODE_11B */ IEEE80211_CHAN_PUREG, /* IEEE80211_MODE_11G */ IEEE80211_CHAN_FHSS, /* IEEE80211_MODE_FH */ IEEE80211_CHAN_T, /* IEEE80211_MODE_TURBO_A */ IEEE80211_CHAN_108G, /* IEEE80211_MODE_TURBO_G */ }; struct ieee80211_channel *ch; uint32_t modeflags; int i; int achannels = 0; /* validate new mode */ if ((ic->ic_modecaps & (1 << mode)) == 0) { ieee80211_err("ieee80211_setmode(): mode %u not supported" " (caps 0x%x)\n", mode, ic->ic_modecaps); return (EINVAL); } /* * Verify at least one channel is present in the available * channel list before committing to the new mode. * Calculate the active channel set. */ ASSERT(mode < IEEE80211_N(chanflags)); modeflags = chanflags[mode]; bzero(ic->ic_chan_active, sizeof (ic->ic_chan_active)); for (i = 0; i <= IEEE80211_CHAN_MAX; i++) { ch = &ic->ic_sup_channels[i]; if (ch->ich_flags == 0) continue; if (mode == IEEE80211_MODE_AUTO) { /* take anything but pure turbo channels */ if ((ch->ich_flags & ~IEEE80211_CHAN_TURBO) != 0) { ieee80211_setbit(ic->ic_chan_active, i); achannels++; } } else { if ((ch->ich_flags & modeflags) == modeflags) { ieee80211_setbit(ic->ic_chan_active, i); achannels++; } } } if (achannels == 0) { ieee80211_err("ieee80211_setmode(): " "no channel found for mode %u\n", mode); return (EINVAL); } /* * If no current/default channel is setup or the current * channel is wrong for the mode then pick the first * available channel from the active list. This is likely * not the right one. */ if (ic->ic_ibss_chan == NULL || ieee80211_isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ic->ic_ibss_chan))) { for (i = 0; i <= IEEE80211_CHAN_MAX; i++) { if (ieee80211_isset(ic->ic_chan_active, i)) { ic->ic_ibss_chan = &ic->ic_sup_channels[i]; break; } } } /* * If the desired channel is set but no longer valid then reset it. */ if (ic->ic_des_chan != IEEE80211_CHAN_ANYC && ieee80211_isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ic->ic_des_chan))) { ic->ic_des_chan = IEEE80211_CHAN_ANYC; } /* * Do mode-specific rate setup. */ if (mode == IEEE80211_MODE_11G || mode == IEEE80211_MODE_11B) ieee80211_setbasicrates(&ic->ic_sup_rates[mode], mode); /* * Setup an initial rate set according to the * current/default channel. This will be changed * when scanning but must exist now so drivers have * consistent state of ic_bsschan. */ if (ic->ic_bss != NULL) ic->ic_bss->in_rates = ic->ic_sup_rates[mode]; ic->ic_curmode = mode; ieee80211_reset_erp(ic); /* reset ERP state */ return (0); } /* * Return the phy mode for with the specified channel so the * caller can select a rate set. This is problematic for channels * where multiple operating modes are possible (e.g. 11g+11b). * In those cases we defer to the current operating mode when set. */ enum ieee80211_phymode ieee80211_chan2mode(ieee80211com_t *ic, struct ieee80211_channel *chan) { if (IEEE80211_IS_CHAN_T(chan)) { return (IEEE80211_MODE_TURBO_A); } else if (IEEE80211_IS_CHAN_5GHZ(chan)) { return (IEEE80211_MODE_11A); } else if (IEEE80211_IS_CHAN_FHSS(chan)) { return (IEEE80211_MODE_FH); } else if (chan->ich_flags & (IEEE80211_CHAN_OFDM|IEEE80211_CHAN_DYN)) { /* * This assumes all 11g channels are also usable * for 11b, which is currently true. */ if (ic->ic_curmode == IEEE80211_MODE_TURBO_G) return (IEEE80211_MODE_TURBO_G); if (ic->ic_curmode == IEEE80211_MODE_11B) return (IEEE80211_MODE_11B); return (IEEE80211_MODE_11G); } else { return (IEEE80211_MODE_11B); } } /* * Return the size of the 802.11 header for a management or data frame. */ int ieee80211_hdrspace(const void *data) { const struct ieee80211_frame *wh = data; int size = sizeof (struct ieee80211_frame); /* NB: we don't handle control frames */ ASSERT((wh->i_fc[0]&IEEE80211_FC0_TYPE_MASK) != IEEE80211_FC0_TYPE_CTL); if ((wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) == IEEE80211_FC1_DIR_DSTODS) size += IEEE80211_ADDR_LEN; return (size); } /* * Allocate and setup a management frame of the specified * size. We return the mblk and a pointer to the start * of the contiguous data area that's been reserved based * on the packet length. */ mblk_t * ieee80211_getmgtframe(uint8_t **frm, int pktlen) { mblk_t *mp; int len; len = sizeof (struct ieee80211_frame) + pktlen; mp = allocb(len, BPRI_MED); if (mp != NULL) { *frm = mp->b_rptr + sizeof (struct ieee80211_frame); mp->b_wptr = mp->b_rptr + len; } else { ieee80211_err("ieee80211_getmgtframe: " "alloc frame failed, %d\n", len); } return (mp); } /* * Send system messages to notify the device has joined a WLAN. * This is an OS specific function. Solaris marks link status * as up. */ void ieee80211_notify_node_join(ieee80211com_t *ic, ieee80211_node_t *in) { if (in == ic->ic_bss) mac_link_update(ic->ic_mach, LINK_STATE_UP); ieee80211_notify(ic, EVENT_ASSOC); /* notify WPA service */ } /* * Send system messages to notify the device has left a WLAN. * This is an OS specific function. Solaris marks link status * as down. */ void ieee80211_notify_node_leave(ieee80211com_t *ic, ieee80211_node_t *in) { if (in == ic->ic_bss) mac_link_update(ic->ic_mach, LINK_STATE_DOWN); ieee80211_notify(ic, EVENT_DISASSOC); /* notify WPA service */ } /* * Get 802.11 kstats defined in ieee802.11(5) * * Return 0 on success */ int ieee80211_stat(ieee80211com_t *ic, uint_t stat, uint64_t *val) { ASSERT(val != NULL); IEEE80211_LOCK(ic); switch (stat) { case WIFI_STAT_TX_FRAGS: *val = ic->ic_stats.is_tx_frags; break; case WIFI_STAT_MCAST_TX: *val = ic->ic_stats.is_tx_mcast; break; case WIFI_STAT_TX_FAILED: *val = ic->ic_stats.is_tx_failed; break; case WIFI_STAT_TX_RETRANS: *val = ic->ic_stats.is_tx_retries; break; case WIFI_STAT_RTS_SUCCESS: *val = ic->ic_stats.is_rts_success; break; case WIFI_STAT_RTS_FAILURE: *val = ic->ic_stats.is_rts_failure; break; case WIFI_STAT_ACK_FAILURE: *val = ic->ic_stats.is_ack_failure; break; case WIFI_STAT_RX_FRAGS: *val = ic->ic_stats.is_rx_frags; break; case WIFI_STAT_MCAST_RX: *val = ic->ic_stats.is_rx_mcast; break; case WIFI_STAT_RX_DUPS: *val = ic->ic_stats.is_rx_dups; break; case WIFI_STAT_FCS_ERRORS: *val = ic->ic_stats.is_fcs_errors; break; case WIFI_STAT_WEP_ERRORS: *val = ic->ic_stats.is_wep_errors; break; } IEEE80211_UNLOCK(ic); return (0); } /* * Attach network interface to the 802.11 support module. This * function must be called before using any of the ieee80211 * functionss. The parameter "ic" MUST be initialized to tell * net80211 about interface's capabilities. */ void ieee80211_attach(ieee80211com_t *ic) { struct ieee80211_impl *im; struct ieee80211_channel *ch; int i; /* Check mandatory callback functions not NULL */ ASSERT(ic->ic_xmit != NULL); mutex_init(&ic->ic_genlock, NULL, MUTEX_DRIVER, NULL); mutex_init(&ic->ic_doorlock, NULL, MUTEX_DRIVER, NULL); im = kmem_alloc(sizeof (ieee80211_impl_t), KM_SLEEP); ic->ic_private = im; cv_init(&im->im_scan_cv, NULL, CV_DRIVER, NULL); /* * Fill in 802.11 available channel set, mark * all available channels as active, and pick * a default channel if not already specified. */ bzero(im->im_chan_avail, sizeof (im->im_chan_avail)); ic->ic_modecaps |= 1 << IEEE80211_MODE_AUTO; for (i = 0; i <= IEEE80211_CHAN_MAX; i++) { ch = &ic->ic_sup_channels[i]; if (ch->ich_flags) { /* Verify driver passed us valid data */ if (i != ieee80211_chan2ieee(ic, ch)) { ieee80211_err("bad channel ignored: " "freq %u flags%x number %u\n", ch->ich_freq, ch->ich_flags, i); ch->ich_flags = 0; continue; } ieee80211_setbit(im->im_chan_avail, i); /* Identify mode capabilities */ if (IEEE80211_IS_CHAN_A(ch)) ic->ic_modecaps |= 1 << IEEE80211_MODE_11A; if (IEEE80211_IS_CHAN_B(ch)) ic->ic_modecaps |= 1 << IEEE80211_MODE_11B; if (IEEE80211_IS_CHAN_PUREG(ch)) ic->ic_modecaps |= 1 << IEEE80211_MODE_11G; if (IEEE80211_IS_CHAN_FHSS(ch)) ic->ic_modecaps |= 1 << IEEE80211_MODE_FH; if (IEEE80211_IS_CHAN_T(ch)) ic->ic_modecaps |= 1 << IEEE80211_MODE_TURBO_A; if (IEEE80211_IS_CHAN_108G(ch)) ic->ic_modecaps |= 1 << IEEE80211_MODE_TURBO_G; if (ic->ic_curchan == NULL) { /* arbitrarily pick the first channel */ ic->ic_curchan = &ic->ic_sup_channels[i]; } } } /* validate ic->ic_curmode */ if ((ic->ic_modecaps & (1 << ic->ic_curmode)) == 0) ic->ic_curmode = IEEE80211_MODE_AUTO; ic->ic_des_chan = IEEE80211_CHAN_ANYC; /* any channel is ok */ (void) ieee80211_setmode(ic, ic->ic_curmode); if (ic->ic_caps & IEEE80211_C_BURST) ic->ic_flags |= IEEE80211_F_BURST; ic->ic_bintval = IEEE80211_BINTVAL_DEFAULT; ic->ic_lintval = ic->ic_bintval; ic->ic_txpowlimit = IEEE80211_TXPOWER_MAX; ic->ic_bmissthreshold = IEEE80211_HWBMISS_DEFAULT; ic->ic_reset = ieee80211_default_reset; ieee80211_node_attach(ic); ieee80211_proto_attach(ic); ieee80211_crypto_attach(ic); ic->ic_watchdog_timer = 0; } /* * Free any ieee80211 structures associated with the driver. */ void ieee80211_detach(ieee80211com_t *ic) { struct ieee80211_impl *im = ic->ic_private; ieee80211_stop_watchdog(ic); cv_destroy(&im->im_scan_cv); kmem_free(im, sizeof (ieee80211_impl_t)); ieee80211_node_detach(ic); ieee80211_crypto_detach(ic); mutex_destroy(&ic->ic_genlock); mutex_destroy(&ic->ic_doorlock); } static struct modlmisc i_wifi_modlmisc = { &mod_miscops, "IEEE80211 Kernel Module v1.2" }; static struct modlinkage i_wifi_modlinkage = { MODREV_1, &i_wifi_modlmisc, NULL }; /* * modlinkage functions */ int _init(void) { return (mod_install(&i_wifi_modlinkage)); } int _fini(void) { return (mod_remove(&i_wifi_modlinkage)); } int _info(struct modinfo *modinfop) { return (mod_info(&i_wifi_modlinkage, modinfop)); }