/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2008, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright 2017, Joyent, Inc. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static void mac_srs_soft_rings_signal(mac_soft_ring_set_t *, uint_t); static void mac_srs_update_fanout_list(mac_soft_ring_set_t *); static void mac_srs_poll_unbind(mac_soft_ring_set_t *); static void mac_srs_worker_unbind(mac_soft_ring_set_t *); static void mac_srs_soft_rings_quiesce(mac_soft_ring_set_t *, uint_t); static int mac_srs_cpu_setup(cpu_setup_t, int, void *); static void mac_srs_worker_bind(mac_soft_ring_set_t *, processorid_t); static void mac_srs_poll_bind(mac_soft_ring_set_t *, processorid_t); static void mac_srs_threads_unbind(mac_soft_ring_set_t *); static void mac_srs_add_glist(mac_soft_ring_set_t *); static void mac_srs_remove_glist(mac_soft_ring_set_t *); static void mac_srs_fanout_list_free(mac_soft_ring_set_t *); static void mac_soft_ring_remove(mac_soft_ring_set_t *, mac_soft_ring_t *); static int mac_compute_soft_ring_count(flow_entry_t *, int, int); static void mac_walk_srs_and_bind(int); static void mac_walk_srs_and_unbind(int); extern boolean_t mac_latency_optimize; static kmem_cache_t *mac_srs_cache; kmem_cache_t *mac_soft_ring_cache; /* * The duration in msec we wait before signalling the soft ring * worker thread in case packets get queued. */ uint32_t mac_soft_ring_worker_wait = 0; /* * A global tunable for turning polling on/off. By default, dynamic * polling is always on and is always very beneficial. It should be * turned off with absolute care and for the rare workload (very * low latency sensitive traffic). */ int mac_poll_enable = B_TRUE; /* * Need to set mac_soft_ring_max_q_cnt based on bandwidth and perhaps latency. * Large values could end up in consuming lot of system memory and cause * system hang. */ int mac_soft_ring_max_q_cnt = 1024; int mac_soft_ring_min_q_cnt = 256; int mac_soft_ring_poll_thres = 16; boolean_t mac_tx_serialize = B_FALSE; /* * mac_tx_srs_hiwat is the queue depth threshold at which callers of * mac_tx() will be notified of flow control condition. * * TCP does not honour flow control condition sent up by mac_tx(). * Thus provision is made for TCP to allow more packets to be queued * in SRS upto a maximum of mac_tx_srs_max_q_cnt. * * Note that mac_tx_srs_hiwat is always be lesser than * mac_tx_srs_max_q_cnt. */ uint32_t mac_tx_srs_max_q_cnt = 100000; uint32_t mac_tx_srs_hiwat = 1000; /* * mac_rx_soft_ring_count, mac_soft_ring_10gig_count: * * Global tunables that determines the number of soft rings to be used for * fanning out incoming traffic on a link. These count will be used only * when no explicit set of CPUs was assigned to the data-links. * * mac_rx_soft_ring_count tunable will come into effect only if * mac_soft_ring_enable is set. mac_soft_ring_enable is turned on by * default only for sun4v platforms. * * mac_rx_soft_ring_10gig_count will come into effect if you are running on a * 10Gbps link and is not dependent upon mac_soft_ring_enable. * * The number of soft rings for fanout for a link or a flow is determined * by mac_compute_soft_ring_count() routine. This routine will take into * account mac_soft_ring_enable, mac_rx_soft_ring_count and * mac_rx_soft_ring_10gig_count to determine the soft ring count for a link. * * If a bandwidth is specified, the determination of the number of soft * rings is based on specified bandwidth, CPU speed and number of CPUs in * the system. */ uint_t mac_rx_soft_ring_count = 8; uint_t mac_rx_soft_ring_10gig_count = 8; /* * Every Tx and Rx mac_soft_ring_set_t (mac_srs) created gets added * to mac_srs_g_list and mac_srs_g_lock protects mac_srs_g_list. The * list is used to walk the list of all MAC threads when a CPU is * coming online or going offline. */ static mac_soft_ring_set_t *mac_srs_g_list = NULL; static krwlock_t mac_srs_g_lock; /* * Whether the SRS threads should be bound, or not. */ boolean_t mac_srs_thread_bind = B_TRUE; /* * Whether Rx/Tx interrupts should be re-targeted. Disabled by default. * dladm command would override this. */ boolean_t mac_tx_intr_retarget = B_FALSE; boolean_t mac_rx_intr_retarget = B_FALSE; /* * If cpu bindings are specified by user, then Tx SRS and its soft * rings should also be bound to the CPUs specified by user. The * CPUs for Tx bindings are at the end of the cpu list provided by * the user. If enough CPUs are not available (for Tx and Rx * SRSes), then the CPUs are shared by both Tx and Rx SRSes. */ #define BIND_TX_SRS_AND_SOFT_RINGS(mac_tx_srs, mrp) { \ processorid_t cpuid; \ int i; \ mac_soft_ring_t *softring; \ mac_cpus_t *srs_cpu; \ \ srs_cpu = &mac_tx_srs->srs_cpu; \ cpuid = srs_cpu->mc_tx_fanout_cpus[0]; \ mac_srs_worker_bind(mac_tx_srs, cpuid); \ if (MAC_TX_SOFT_RINGS(mac_tx_srs)) { \ for (i = 0; i < mac_tx_srs->srs_tx_ring_count; i++) { \ cpuid = srs_cpu->mc_tx_fanout_cpus[i]; \ softring = mac_tx_srs->srs_tx_soft_rings[i]; \ if (cpuid != -1) { \ (void) mac_soft_ring_bind(softring, \ cpuid); \ } \ } \ } \ } /* * Re-targeting is allowed only for exclusive group or for primary. */ #define RETARGETABLE_CLIENT(group, mcip) \ ((((group) != NULL) && \ ((group)->mrg_state == MAC_GROUP_STATE_RESERVED)) || \ mac_is_primary_client(mcip)) #define MAC_RING_RETARGETABLE(ring) \ (((ring) != NULL) && \ ((ring)->mr_info.mri_intr.mi_ddi_handle != NULL) && \ !((ring)->mr_info.mri_intr.mi_ddi_shared)) /* INIT and FINI ROUTINES */ void mac_soft_ring_init(void) { mac_soft_ring_cache = kmem_cache_create("mac_soft_ring_cache", sizeof (mac_soft_ring_t), 64, NULL, NULL, NULL, NULL, NULL, 0); mac_srs_cache = kmem_cache_create("mac_srs_cache", sizeof (mac_soft_ring_set_t), 64, NULL, NULL, NULL, NULL, NULL, 0); rw_init(&mac_srs_g_lock, NULL, RW_DEFAULT, NULL); mutex_enter(&cpu_lock); register_cpu_setup_func(mac_srs_cpu_setup, NULL); mutex_exit(&cpu_lock); } void mac_soft_ring_finish(void) { mutex_enter(&cpu_lock); unregister_cpu_setup_func(mac_srs_cpu_setup, NULL); mutex_exit(&cpu_lock); rw_destroy(&mac_srs_g_lock); kmem_cache_destroy(mac_soft_ring_cache); kmem_cache_destroy(mac_srs_cache); } static void mac_srs_soft_rings_free(mac_soft_ring_set_t *mac_srs) { mac_soft_ring_t *softring, *next, *head; /* * Synchronize with mac_walk_srs_bind/unbind which are callbacks from * DR. The callbacks from DR are called with cpu_lock held, and hence * can't wait to grab the mac perimeter. The soft ring list is hence * protected for read access by srs_lock. Changing the soft ring list * needs the mac perimeter and the srs_lock. */ mutex_enter(&mac_srs->srs_lock); head = mac_srs->srs_soft_ring_head; mac_srs->srs_soft_ring_head = NULL; mac_srs->srs_soft_ring_tail = NULL; mac_srs->srs_soft_ring_count = 0; mutex_exit(&mac_srs->srs_lock); for (softring = head; softring != NULL; softring = next) { next = softring->s_ring_next; mac_soft_ring_free(softring); } } static void mac_srs_add_glist(mac_soft_ring_set_t *mac_srs) { ASSERT(mac_srs->srs_next == NULL && mac_srs->srs_prev == NULL); ASSERT(MAC_PERIM_HELD((mac_handle_t)mac_srs->srs_mcip->mci_mip)); rw_enter(&mac_srs_g_lock, RW_WRITER); mutex_enter(&mac_srs->srs_lock); ASSERT((mac_srs->srs_state & SRS_IN_GLIST) == 0); if (mac_srs_g_list == NULL) { mac_srs_g_list = mac_srs; } else { mac_srs->srs_next = mac_srs_g_list; mac_srs_g_list->srs_prev = mac_srs; mac_srs->srs_prev = NULL; mac_srs_g_list = mac_srs; } mac_srs->srs_state |= SRS_IN_GLIST; mutex_exit(&mac_srs->srs_lock); rw_exit(&mac_srs_g_lock); } static void mac_srs_remove_glist(mac_soft_ring_set_t *mac_srs) { ASSERT(MAC_PERIM_HELD((mac_handle_t)mac_srs->srs_mcip->mci_mip)); rw_enter(&mac_srs_g_lock, RW_WRITER); mutex_enter(&mac_srs->srs_lock); ASSERT((mac_srs->srs_state & SRS_IN_GLIST) != 0); if (mac_srs == mac_srs_g_list) { mac_srs_g_list = mac_srs->srs_next; if (mac_srs_g_list != NULL) mac_srs_g_list->srs_prev = NULL; } else { mac_srs->srs_prev->srs_next = mac_srs->srs_next; if (mac_srs->srs_next != NULL) mac_srs->srs_next->srs_prev = mac_srs->srs_prev; } mac_srs->srs_state &= ~SRS_IN_GLIST; mutex_exit(&mac_srs->srs_lock); rw_exit(&mac_srs_g_lock); } /* POLLING SETUP AND TEAR DOWN ROUTINES */ /* * mac_srs_client_poll_quiesce and mac_srs_client_poll_restart * * These routines are used to call back into the upper layer * (primarily TCP squeue) to stop polling the soft rings or * restart polling. */ void mac_srs_client_poll_quiesce(mac_client_impl_t *mcip, mac_soft_ring_set_t *mac_srs) { mac_soft_ring_t *softring; ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip)); if (!(mac_srs->srs_type & SRST_CLIENT_POLL_ENABLED)) { ASSERT(!(mac_srs->srs_type & SRST_DLS_BYPASS)); return; } for (softring = mac_srs->srs_soft_ring_head; softring != NULL; softring = softring->s_ring_next) { if ((softring->s_ring_type & ST_RING_TCP) && (softring->s_ring_rx_arg2 != NULL)) { mcip->mci_resource_quiesce(mcip->mci_resource_arg, softring->s_ring_rx_arg2); } } } void mac_srs_client_poll_restart(mac_client_impl_t *mcip, mac_soft_ring_set_t *mac_srs) { mac_soft_ring_t *softring; ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip)); if (!(mac_srs->srs_type & SRST_CLIENT_POLL_ENABLED)) { ASSERT(!(mac_srs->srs_type & SRST_DLS_BYPASS)); return; } for (softring = mac_srs->srs_soft_ring_head; softring != NULL; softring = softring->s_ring_next) { if ((softring->s_ring_type & ST_RING_TCP) && (softring->s_ring_rx_arg2 != NULL)) { mcip->mci_resource_restart(mcip->mci_resource_arg, softring->s_ring_rx_arg2); } } } /* * Register the given SRS and associated soft rings with the consumer and * enable the polling interface used by the consumer.(i.e IP) over this * SRS and associated soft rings. */ void mac_srs_client_poll_enable(mac_client_impl_t *mcip, mac_soft_ring_set_t *mac_srs) { mac_rx_fifo_t mrf; mac_soft_ring_t *softring; ASSERT(mac_srs->srs_mcip == mcip); ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip)); if (!(mcip->mci_state_flags & MCIS_CLIENT_POLL_CAPABLE)) return; bzero(&mrf, sizeof (mac_rx_fifo_t)); mrf.mrf_type = MAC_RX_FIFO; /* * A SRS is capable of acting as a soft ring for cases * where no fanout is needed. This is the case for userland * flows. */ if (mac_srs->srs_type & SRST_NO_SOFT_RINGS) return; mrf.mrf_receive = (mac_receive_t)mac_soft_ring_poll; mrf.mrf_intr_enable = (mac_intr_enable_t)mac_soft_ring_intr_enable; mrf.mrf_intr_disable = (mac_intr_disable_t)mac_soft_ring_intr_disable; mac_srs->srs_type |= SRST_CLIENT_POLL_ENABLED; softring = mac_srs->srs_soft_ring_head; while (softring != NULL) { if (softring->s_ring_type & (ST_RING_TCP | ST_RING_UDP)) { /* * TCP and UDP support DLS bypass. Squeue polling * support implies DLS bypass since the squeue poll * path does not have DLS processing. */ mac_soft_ring_dls_bypass(softring, mcip->mci_direct_rx_fn, mcip->mci_direct_rx_arg); } /* * Non-TCP protocols don't support squeues. Hence we don't * make any ring addition callbacks for non-TCP rings */ if (!(softring->s_ring_type & ST_RING_TCP)) { softring->s_ring_rx_arg2 = NULL; softring = softring->s_ring_next; continue; } mrf.mrf_rx_arg = softring; mrf.mrf_intr_handle = (mac_intr_handle_t)softring; mrf.mrf_cpu_id = softring->s_ring_cpuid; mrf.mrf_flow_priority = mac_srs->srs_pri; softring->s_ring_rx_arg2 = mcip->mci_resource_add( mcip->mci_resource_arg, (mac_resource_t *)&mrf); softring = softring->s_ring_next; } } /* * Unregister the given SRS and associated soft rings with the consumer and * disable the polling interface used by the consumer.(i.e IP) over this * SRS and associated soft rings. */ void mac_srs_client_poll_disable(mac_client_impl_t *mcip, mac_soft_ring_set_t *mac_srs) { mac_soft_ring_t *softring; ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip)); /* * A SRS is capable of acting as a soft ring for cases * where no protocol fanout is needed. This is the case * for userland flows. Nothing to do here. */ if (mac_srs->srs_type & SRST_NO_SOFT_RINGS) return; mutex_enter(&mac_srs->srs_lock); if (!(mac_srs->srs_type & SRST_CLIENT_POLL_ENABLED)) { ASSERT(!(mac_srs->srs_type & SRST_DLS_BYPASS)); mutex_exit(&mac_srs->srs_lock); return; } mac_srs->srs_type &= ~(SRST_CLIENT_POLL_ENABLED | SRST_DLS_BYPASS); mutex_exit(&mac_srs->srs_lock); /* * DLS bypass is now disabled in the case of both TCP and UDP. * Reset the soft ring callbacks to the standard 'mac_rx_deliver' * callback. In addition, in the case of TCP, invoke IP's callback * for ring removal. */ for (softring = mac_srs->srs_soft_ring_head; softring != NULL; softring = softring->s_ring_next) { if (!(softring->s_ring_type & (ST_RING_UDP | ST_RING_TCP))) continue; if ((softring->s_ring_type & ST_RING_TCP) && softring->s_ring_rx_arg2 != NULL) { mcip->mci_resource_remove(mcip->mci_resource_arg, softring->s_ring_rx_arg2); } mutex_enter(&softring->s_ring_lock); while (softring->s_ring_state & S_RING_PROC) { softring->s_ring_state |= S_RING_CLIENT_WAIT; cv_wait(&softring->s_ring_client_cv, &softring->s_ring_lock); } softring->s_ring_state &= ~S_RING_CLIENT_WAIT; softring->s_ring_rx_arg2 = NULL; softring->s_ring_rx_func = mac_rx_deliver; softring->s_ring_rx_arg1 = mcip; mutex_exit(&softring->s_ring_lock); } } /* * Enable or disable poll capability of the SRS on the underlying Rx ring. * * There is a need to enable or disable the poll capability of an SRS over an * Rx ring depending on the number of mac clients sharing the ring and also * whether user flows are configured on it. However the poll state is actively * manipulated by the SRS worker and poll threads and uncoordinated changes by * yet another thread to the underlying capability can surprise them leading * to assert failures. Instead we quiesce the SRS, make the changes and then * restart the SRS. */ static void mac_srs_poll_state_change(mac_soft_ring_set_t *mac_srs, boolean_t turn_off_poll_capab, mac_rx_func_t rx_func) { boolean_t need_restart = B_FALSE; mac_srs_rx_t *srs_rx = &mac_srs->srs_rx; mac_ring_t *ring; if (!SRS_QUIESCED(mac_srs)) { mac_rx_srs_quiesce(mac_srs, SRS_QUIESCE); need_restart = B_TRUE; } ring = mac_srs->srs_ring; if ((ring != NULL) && (ring->mr_classify_type == MAC_HW_CLASSIFIER)) { if (turn_off_poll_capab) mac_srs->srs_state &= ~SRS_POLLING_CAPAB; else if (mac_poll_enable) mac_srs->srs_state |= SRS_POLLING_CAPAB; } srs_rx->sr_lower_proc = rx_func; if (need_restart) mac_rx_srs_restart(mac_srs); } /* CPU RECONFIGURATION AND FANOUT COMPUTATION ROUTINES */ /* * Return the next CPU to be used to bind a MAC kernel thread. * If a cpupart is specified, the cpu chosen must be from that * cpu partition. */ static processorid_t mac_next_bind_cpu(cpupart_t *cpupart) { static cpu_t *cp = NULL; cpu_t *cp_start; ASSERT(MUTEX_HELD(&cpu_lock)); if (cp == NULL) cp = cpu_list; cp = cp->cpu_next_onln; cp_start = cp; do { if ((cpupart == NULL) || (cp->cpu_part == cpupart)) return (cp->cpu_id); } while ((cp = cp->cpu_next_onln) != cp_start); return (NULL); } /* ARGSUSED */ static int mac_srs_cpu_setup(cpu_setup_t what, int id, void *arg) { ASSERT(MUTEX_HELD(&cpu_lock)); switch (what) { case CPU_CONFIG: case CPU_ON: case CPU_CPUPART_IN: mac_walk_srs_and_bind(id); break; case CPU_UNCONFIG: case CPU_OFF: case CPU_CPUPART_OUT: mac_walk_srs_and_unbind(id); break; default: break; } return (0); } /* * mac_compute_soft_ring_count(): * * This routine computes the number of soft rings needed to handle incoming * load given a flow_entry. * * The routine does the following: * 1) soft rings will be created if mac_soft_ring_enable is set. * 2) If the underlying link is a 10Gbps link, then soft rings will be * created even if mac_soft_ring_enable is not set. The number of soft * rings, so created, will equal mac_rx_soft_ring_10gig_count. * 3) On a sun4v platform (i.e., mac_soft_ring_enable is set), 2 times the * mac_rx_soft_ring_10gig_count number of soft rings will be created for a * 10Gbps link. * * If a bandwidth limit is specified, the number that gets computed is * dependent upon CPU speed, the number of Rx rings configured, and * the bandwidth limit. * If more Rx rings are available, less number of soft rings is needed. * * mac_use_bw_heuristic is another "hidden" variable that can be used to * override the default use of soft ring count computation. Depending upon * the usefulness of it, mac_use_bw_heuristic can later be made into a * data-link property or removed altogether. * * TODO: Cleanup and tighten some of the assumptions. */ boolean_t mac_use_bw_heuristic = B_TRUE; static int mac_compute_soft_ring_count(flow_entry_t *flent, int rx_srs_cnt, int maxcpus) { uint64_t cpu_speed, bw = 0; int srings = 0; boolean_t bw_enabled = B_FALSE; ASSERT(!(flent->fe_type & FLOW_USER)); if (flent->fe_resource_props.mrp_mask & MRP_MAXBW && mac_use_bw_heuristic) { /* bandwidth enabled */ bw_enabled = B_TRUE; bw = flent->fe_resource_props.mrp_maxbw; } if (!bw_enabled) { /* No bandwidth enabled */ if (mac_soft_ring_enable) srings = mac_rx_soft_ring_count; /* Is this a 10Gig link? */ flent->fe_nic_speed = mac_client_stat_get(flent->fe_mcip, MAC_STAT_IFSPEED); /* convert to Mbps */ if (((flent->fe_nic_speed)/1000000) > 1000 && mac_rx_soft_ring_10gig_count > 0) { /* This is a 10Gig link */ srings = mac_rx_soft_ring_10gig_count; /* * Use 2 times mac_rx_soft_ring_10gig_count for * sun4v systems. */ if (mac_soft_ring_enable) srings = srings * 2; } } else { /* * Soft ring computation using CPU speed and specified * bandwidth limit. */ /* Assumption: all CPUs have the same frequency */ cpu_speed = (uint64_t)CPU->cpu_type_info.pi_clock; /* cpu_speed is in MHz; make bw in units of Mbps. */ bw = bw/1000000; if (bw >= 1000) { /* * bw is greater than or equal to 1Gbps. * The number of soft rings required is a function * of bandwidth and CPU speed. To keep this simple, * let's use this rule: 1GHz CPU can handle 1Gbps. * If bw is less than 1 Gbps, then there is no need * for soft rings. Assumption is that CPU speeds * (on modern systems) are at least 1GHz. */ srings = bw/cpu_speed; if (srings <= 1 && mac_soft_ring_enable) { /* * Give at least 2 soft rings * for sun4v systems */ srings = 2; } } } /* * If the flent has multiple Rx SRSs, then each SRS need not * have that many soft rings on top of it. The number of * soft rings for each Rx SRS is found by dividing srings by * rx_srs_cnt. */ if (rx_srs_cnt > 1) { int remainder; remainder = srings%rx_srs_cnt; srings = srings/rx_srs_cnt; if (remainder != 0) srings++; /* * Fanning out to 1 soft ring is not very useful. * Set it as well to 0 and mac_srs_fanout_init() * will take care of creating a single soft ring * for proto fanout. */ if (srings == 1) srings = 0; } /* Do some more massaging */ srings = min(srings, maxcpus); srings = min(srings, MAX_SR_FANOUT); return (srings); } /* * mac_tx_cpu_init: * set up CPUs for Tx interrupt re-targeting and Tx worker * thread binding */ static void mac_tx_cpu_init(flow_entry_t *flent, mac_resource_props_t *mrp, cpupart_t *cpupart) { mac_soft_ring_set_t *tx_srs = flent->fe_tx_srs; mac_srs_tx_t *srs_tx = &tx_srs->srs_tx; mac_cpus_t *srs_cpu = &tx_srs->srs_cpu; mac_soft_ring_t *sringp; mac_ring_t *ring; processorid_t worker_cpuid; boolean_t retargetable_client = B_FALSE; int i, j; if (RETARGETABLE_CLIENT((mac_group_t *)flent->fe_tx_ring_group, flent->fe_mcip)) { retargetable_client = B_TRUE; } if (MAC_TX_SOFT_RINGS(tx_srs)) { if (mrp != NULL) j = mrp->mrp_ncpus - 1; for (i = 0; i < tx_srs->srs_tx_ring_count; i++) { if (mrp != NULL) { if (j < 0) j = mrp->mrp_ncpus - 1; worker_cpuid = mrp->mrp_cpu[j]; } else { /* * Bind interrupt to the next CPU available * and leave the worker unbound. */ worker_cpuid = -1; } sringp = tx_srs->srs_tx_soft_rings[i]; ring = (mac_ring_t *)sringp->s_ring_tx_arg2; srs_cpu->mc_tx_fanout_cpus[i] = worker_cpuid; if (MAC_RING_RETARGETABLE(ring) && retargetable_client) { mutex_enter(&cpu_lock); srs_cpu->mc_tx_intr_cpu[i] = (mrp != NULL) ? mrp->mrp_cpu[j] : (mac_tx_intr_retarget ? mac_next_bind_cpu(cpupart) : -1); mutex_exit(&cpu_lock); } else { srs_cpu->mc_tx_intr_cpu[i] = -1; } if (mrp != NULL) j--; } } else { /* Tx mac_ring_handle_t is stored in st_arg2 */ srs_cpu->mc_tx_fanout_cpus[0] = (mrp != NULL) ? mrp->mrp_cpu[mrp->mrp_ncpus - 1] : -1; ring = (mac_ring_t *)srs_tx->st_arg2; if (MAC_RING_RETARGETABLE(ring) && retargetable_client) { mutex_enter(&cpu_lock); srs_cpu->mc_tx_intr_cpu[0] = (mrp != NULL) ? mrp->mrp_cpu[mrp->mrp_ncpus - 1] : (mac_tx_intr_retarget ? mac_next_bind_cpu(cpupart) : -1); mutex_exit(&cpu_lock); } else { srs_cpu->mc_tx_intr_cpu[0] = -1; } } } /* * Assignment of user specified CPUs to a link. * * Minimum CPUs required to get an optimal assignmet: * For each Rx SRS, atleast two CPUs are needed if mac_latency_optimize * flag is set -- one for polling, one for fanout soft ring. * If mac_latency_optimize is not set, then 3 CPUs are needed -- one * for polling, one for SRS worker thread and one for fanout soft ring. * * The CPUs needed for Tx side is equal to the number of Tx rings * the link is using. * * mac_flow_user_cpu_init() categorizes the CPU assignment depending * upon the number of CPUs in 3 different buckets. * * In the first bucket, the most optimal case is handled. The user has * passed enough number of CPUs and every thread gets its own CPU. * * The second and third are the sub-optimal cases. Enough CPUs are not * available. * * The second bucket handles the case where atleast one distinct CPU is * is available for each of the Rx rings (Rx SRSes) and Tx rings (Tx * SRS or soft rings). * * In the third case (worst case scenario), specified CPU count is less * than the Rx rings configured for the link. In this case, we round * robin the CPUs among the Rx SRSes and Tx SRS/soft rings. */ static void mac_flow_user_cpu_init(flow_entry_t *flent, mac_resource_props_t *mrp) { mac_soft_ring_set_t *rx_srs, *tx_srs; int i, srs_cnt; mac_cpus_t *srs_cpu; int no_of_cpus, cpu_cnt; int rx_srs_cnt, reqd_rx_cpu_cnt; int fanout_cpu_cnt, reqd_tx_cpu_cnt; int reqd_poll_worker_cnt, fanout_cnt_per_srs; mac_resource_props_t *emrp = &flent->fe_effective_props; ASSERT(mrp->mrp_fanout_mode == MCM_CPUS); /* * The check for nbc_ncpus to be within limits for * the user specified case was done earlier and if * not within limits, an error would have been * returned to the user. */ ASSERT(mrp->mrp_ncpus > 0); no_of_cpus = mrp->mrp_ncpus; if (mrp->mrp_rx_intr_cpu != -1) { /* * interrupt has been re-targetted. Poll * thread needs to be bound to interrupt * CPU. * * Find where in the list is the intr * CPU and swap it with the first one. * We will be using the first CPU in the * list for poll. */ for (i = 0; i < no_of_cpus; i++) { if (mrp->mrp_cpu[i] == mrp->mrp_rx_intr_cpu) break; } mrp->mrp_cpu[i] = mrp->mrp_cpu[0]; mrp->mrp_cpu[0] = mrp->mrp_rx_intr_cpu; } /* * Requirements: * The number of CPUs that each Rx ring needs is dependent * upon mac_latency_optimize flag. * 1) If set, atleast 2 CPUs are needed -- one for * polling, one for fanout soft ring. * 2) If not set, then atleast 3 CPUs are needed -- one * for polling, one for srs worker thread, and one for * fanout soft ring. */ rx_srs_cnt = (flent->fe_rx_srs_cnt > 1) ? (flent->fe_rx_srs_cnt - 1) : flent->fe_rx_srs_cnt; reqd_rx_cpu_cnt = mac_latency_optimize ? (rx_srs_cnt * 2) : (rx_srs_cnt * 3); /* How many CPUs are needed for Tx side? */ tx_srs = flent->fe_tx_srs; reqd_tx_cpu_cnt = MAC_TX_SOFT_RINGS(tx_srs) ? tx_srs->srs_tx_ring_count : 1; /* CPUs needed for Rx SRSes poll and worker threads */ reqd_poll_worker_cnt = mac_latency_optimize ? rx_srs_cnt : rx_srs_cnt * 2; /* Has the user provided enough CPUs? */ if (no_of_cpus >= (reqd_rx_cpu_cnt + reqd_tx_cpu_cnt)) { /* * Best case scenario. There is enough CPUs. All * Rx rings will get their own set of CPUs plus * Tx soft rings will get their own. */ /* * fanout_cpu_cnt is the number of CPUs available * for Rx side fanout soft rings. */ fanout_cpu_cnt = no_of_cpus - reqd_poll_worker_cnt - reqd_tx_cpu_cnt; /* * Divide fanout_cpu_cnt by rx_srs_cnt to find * out how many fanout soft rings each Rx SRS * can have. */ fanout_cnt_per_srs = fanout_cpu_cnt/rx_srs_cnt; /* fanout_cnt_per_srs should not be > MAX_SR_FANOUT */ fanout_cnt_per_srs = min(fanout_cnt_per_srs, MAX_SR_FANOUT); /* Do the assignment for the default Rx ring */ cpu_cnt = 0; rx_srs = flent->fe_rx_srs[0]; ASSERT(rx_srs->srs_ring == NULL); if (rx_srs->srs_fanout_state == SRS_FANOUT_INIT) rx_srs->srs_fanout_state = SRS_FANOUT_REINIT; srs_cpu = &rx_srs->srs_cpu; srs_cpu->mc_ncpus = no_of_cpus; bcopy(mrp->mrp_cpu, srs_cpu->mc_cpus, sizeof (srs_cpu->mc_cpus)); srs_cpu->mc_rx_fanout_cnt = fanout_cnt_per_srs; srs_cpu->mc_rx_pollid = mrp->mrp_cpu[cpu_cnt++]; /* Retarget the interrupt to the same CPU as the poll */ srs_cpu->mc_rx_intr_cpu = srs_cpu->mc_rx_pollid; srs_cpu->mc_rx_workerid = (mac_latency_optimize ? srs_cpu->mc_rx_pollid : mrp->mrp_cpu[cpu_cnt++]); for (i = 0; i < fanout_cnt_per_srs; i++) srs_cpu->mc_rx_fanout_cpus[i] = mrp->mrp_cpu[cpu_cnt++]; /* Do the assignment for h/w Rx SRSes */ if (flent->fe_rx_srs_cnt > 1) { cpu_cnt = 0; for (srs_cnt = 1; srs_cnt < flent->fe_rx_srs_cnt; srs_cnt++) { rx_srs = flent->fe_rx_srs[srs_cnt]; ASSERT(rx_srs->srs_ring != NULL); if (rx_srs->srs_fanout_state == SRS_FANOUT_INIT) { rx_srs->srs_fanout_state = SRS_FANOUT_REINIT; } srs_cpu = &rx_srs->srs_cpu; srs_cpu->mc_ncpus = no_of_cpus; bcopy(mrp->mrp_cpu, srs_cpu->mc_cpus, sizeof (srs_cpu->mc_cpus)); srs_cpu->mc_rx_fanout_cnt = fanout_cnt_per_srs; /* The first CPU in the list is the intr CPU */ srs_cpu->mc_rx_pollid = mrp->mrp_cpu[cpu_cnt++]; srs_cpu->mc_rx_intr_cpu = srs_cpu->mc_rx_pollid; srs_cpu->mc_rx_workerid = (mac_latency_optimize ? srs_cpu->mc_rx_pollid : mrp->mrp_cpu[cpu_cnt++]); for (i = 0; i < fanout_cnt_per_srs; i++) { srs_cpu->mc_rx_fanout_cpus[i] = mrp->mrp_cpu[cpu_cnt++]; } ASSERT(cpu_cnt <= no_of_cpus); } } goto tx_cpu_init; } /* * Sub-optimal case. * We have the following information: * no_of_cpus - no. of cpus that user passed. * rx_srs_cnt - no. of rx rings. * reqd_rx_cpu_cnt = mac_latency_optimize?rx_srs_cnt*2:rx_srs_cnt*3 * reqd_tx_cpu_cnt - no. of cpus reqd. for Tx side. * reqd_poll_worker_cnt = mac_latency_optimize?rx_srs_cnt:rx_srs_cnt*2 */ /* * If we bind the Rx fanout soft rings to the same CPUs * as poll/worker, would that be enough? */ if (no_of_cpus >= (rx_srs_cnt + reqd_tx_cpu_cnt)) { boolean_t worker_assign = B_FALSE; /* * If mac_latency_optimize is not set, are there * enough CPUs to assign a CPU for worker also? */ if (no_of_cpus >= (reqd_poll_worker_cnt + reqd_tx_cpu_cnt)) worker_assign = B_TRUE; /* * Zero'th Rx SRS is the default Rx ring. It is not * associated with h/w Rx ring. */ rx_srs = flent->fe_rx_srs[0]; ASSERT(rx_srs->srs_ring == NULL); if (rx_srs->srs_fanout_state == SRS_FANOUT_INIT) rx_srs->srs_fanout_state = SRS_FANOUT_REINIT; cpu_cnt = 0; srs_cpu = &rx_srs->srs_cpu; srs_cpu->mc_ncpus = no_of_cpus; bcopy(mrp->mrp_cpu, srs_cpu->mc_cpus, sizeof (srs_cpu->mc_cpus)); srs_cpu->mc_rx_fanout_cnt = 1; srs_cpu->mc_rx_pollid = mrp->mrp_cpu[cpu_cnt++]; /* Retarget the interrupt to the same CPU as the poll */ srs_cpu->mc_rx_intr_cpu = srs_cpu->mc_rx_pollid; srs_cpu->mc_rx_workerid = ((!mac_latency_optimize && worker_assign) ? mrp->mrp_cpu[cpu_cnt++] : srs_cpu->mc_rx_pollid); srs_cpu->mc_rx_fanout_cpus[0] = mrp->mrp_cpu[cpu_cnt]; /* Do CPU bindings for SRSes having h/w Rx rings */ if (flent->fe_rx_srs_cnt > 1) { cpu_cnt = 0; for (srs_cnt = 1; srs_cnt < flent->fe_rx_srs_cnt; srs_cnt++) { rx_srs = flent->fe_rx_srs[srs_cnt]; ASSERT(rx_srs->srs_ring != NULL); if (rx_srs->srs_fanout_state == SRS_FANOUT_INIT) { rx_srs->srs_fanout_state = SRS_FANOUT_REINIT; } srs_cpu = &rx_srs->srs_cpu; srs_cpu->mc_ncpus = no_of_cpus; bcopy(mrp->mrp_cpu, srs_cpu->mc_cpus, sizeof (srs_cpu->mc_cpus)); srs_cpu->mc_rx_pollid = mrp->mrp_cpu[cpu_cnt]; srs_cpu->mc_rx_intr_cpu = srs_cpu->mc_rx_pollid; srs_cpu->mc_rx_workerid = ((!mac_latency_optimize && worker_assign) ? mrp->mrp_cpu[++cpu_cnt] : srs_cpu->mc_rx_pollid); srs_cpu->mc_rx_fanout_cnt = 1; srs_cpu->mc_rx_fanout_cpus[0] = mrp->mrp_cpu[cpu_cnt]; cpu_cnt++; ASSERT(cpu_cnt <= no_of_cpus); } } goto tx_cpu_init; } /* * Real sub-optimal case. Not enough CPUs for poll and * Tx soft rings. Do a round robin assignment where * each Rx SRS will get the same CPU for poll, worker * and fanout soft ring. */ cpu_cnt = 0; for (srs_cnt = 0; srs_cnt < flent->fe_rx_srs_cnt; srs_cnt++) { rx_srs = flent->fe_rx_srs[srs_cnt]; srs_cpu = &rx_srs->srs_cpu; if (rx_srs->srs_fanout_state == SRS_FANOUT_INIT) rx_srs->srs_fanout_state = SRS_FANOUT_REINIT; srs_cpu->mc_ncpus = no_of_cpus; bcopy(mrp->mrp_cpu, srs_cpu->mc_cpus, sizeof (srs_cpu->mc_cpus)); srs_cpu->mc_rx_fanout_cnt = 1; srs_cpu->mc_rx_pollid = mrp->mrp_cpu[cpu_cnt]; /* Retarget the interrupt to the same CPU as the poll */ srs_cpu->mc_rx_intr_cpu = srs_cpu->mc_rx_pollid; srs_cpu->mc_rx_workerid = mrp->mrp_cpu[cpu_cnt]; srs_cpu->mc_rx_fanout_cpus[0] = mrp->mrp_cpu[cpu_cnt]; if (++cpu_cnt >= no_of_cpus) cpu_cnt = 0; } tx_cpu_init: mac_tx_cpu_init(flent, mrp, NULL); /* * Copy the user specified CPUs to the effective CPUs */ for (i = 0; i < mrp->mrp_ncpus; i++) { emrp->mrp_cpu[i] = mrp->mrp_cpu[i]; } emrp->mrp_ncpus = mrp->mrp_ncpus; emrp->mrp_mask = mrp->mrp_mask; bzero(emrp->mrp_pool, MAXPATHLEN); } /* * mac_flow_cpu_init(): * * Each SRS has a mac_cpu_t structure, srs_cpu. This routine fills in * the CPU binding information in srs_cpu for all Rx SRSes associated * with a flent. */ static void mac_flow_cpu_init(flow_entry_t *flent, cpupart_t *cpupart) { mac_soft_ring_set_t *rx_srs; processorid_t cpuid; int i, j, k, srs_cnt, nscpus, maxcpus, soft_ring_cnt = 0; mac_cpus_t *srs_cpu; mac_resource_props_t *emrp = &flent->fe_effective_props; uint32_t cpus[MRP_NCPUS]; /* * The maximum number of CPUs available can either be * the number of CPUs in the pool or the number of CPUs * in the system. */ maxcpus = (cpupart != NULL) ? cpupart->cp_ncpus : ncpus; /* * Compute the number of soft rings needed on top for each Rx * SRS. "rx_srs_cnt-1" indicates the number of Rx SRS * associated with h/w Rx rings. Soft ring count needed for * each h/w Rx SRS is computed and the same is applied to * software classified Rx SRS. The first Rx SRS in fe_rx_srs[] * is the software classified Rx SRS. */ soft_ring_cnt = mac_compute_soft_ring_count(flent, flent->fe_rx_srs_cnt - 1, maxcpus); if (soft_ring_cnt == 0) { /* * Even when soft_ring_cnt is 0, we still need * to create a soft ring for TCP, UDP and * OTHER. So set it to 1. */ soft_ring_cnt = 1; } for (srs_cnt = 0; srs_cnt < flent->fe_rx_srs_cnt; srs_cnt++) { rx_srs = flent->fe_rx_srs[srs_cnt]; srs_cpu = &rx_srs->srs_cpu; if (rx_srs->srs_fanout_state == SRS_FANOUT_INIT) rx_srs->srs_fanout_state = SRS_FANOUT_REINIT; srs_cpu->mc_ncpus = soft_ring_cnt; srs_cpu->mc_rx_fanout_cnt = soft_ring_cnt; mutex_enter(&cpu_lock); for (j = 0; j < soft_ring_cnt; j++) { cpuid = mac_next_bind_cpu(cpupart); srs_cpu->mc_cpus[j] = cpuid; srs_cpu->mc_rx_fanout_cpus[j] = cpuid; } cpuid = mac_next_bind_cpu(cpupart); srs_cpu->mc_rx_pollid = cpuid; srs_cpu->mc_rx_intr_cpu = (mac_rx_intr_retarget ? srs_cpu->mc_rx_pollid : -1); /* increment ncpus to account for polling cpu */ srs_cpu->mc_ncpus++; srs_cpu->mc_cpus[j++] = cpuid; if (!mac_latency_optimize) { cpuid = mac_next_bind_cpu(cpupart); srs_cpu->mc_ncpus++; srs_cpu->mc_cpus[j++] = cpuid; } srs_cpu->mc_rx_workerid = cpuid; mutex_exit(&cpu_lock); } nscpus = 0; for (srs_cnt = 0; srs_cnt < flent->fe_rx_srs_cnt; srs_cnt++) { rx_srs = flent->fe_rx_srs[srs_cnt]; srs_cpu = &rx_srs->srs_cpu; for (j = 0; j < srs_cpu->mc_ncpus; j++) { cpus[nscpus++] = srs_cpu->mc_cpus[j]; } } /* * Copy cpu list to fe_effective_props * without duplicates. */ k = 0; for (i = 0; i < nscpus; i++) { for (j = 0; j < k; j++) { if (emrp->mrp_cpu[j] == cpus[i]) break; } if (j == k) emrp->mrp_cpu[k++] = cpus[i]; } emrp->mrp_ncpus = k; mac_tx_cpu_init(flent, NULL, cpupart); } /* * DATAPATH SETUP ROUTINES * (setup SRS and set/update FANOUT, B/W and PRIORITY) */ /* * mac_srs_fanout_list_alloc: * * The underlying device can expose upto MAX_RINGS_PER_GROUP worth of * rings to a client. In such a case, MAX_RINGS_PER_GROUP worth of * array space is needed to store Tx soft rings. Thus we allocate so * much array space for srs_tx_soft_rings. * * And when it is an aggr, again we allocate MAX_RINGS_PER_GROUP worth * of space to st_soft_rings. This array is used for quick access to * soft ring associated with a pseudo Tx ring based on the pseudo * ring's index (mr_index). */ static void mac_srs_fanout_list_alloc(mac_soft_ring_set_t *mac_srs) { mac_client_impl_t *mcip = mac_srs->srs_mcip; if (mac_srs->srs_type & SRST_TX) { mac_srs->srs_tx_soft_rings = (mac_soft_ring_t **) kmem_zalloc(sizeof (mac_soft_ring_t *) * MAX_RINGS_PER_GROUP, KM_SLEEP); if (mcip->mci_state_flags & MCIS_IS_AGGR) { mac_srs_tx_t *tx = &mac_srs->srs_tx; tx->st_soft_rings = (mac_soft_ring_t **) kmem_zalloc(sizeof (mac_soft_ring_t *) * MAX_RINGS_PER_GROUP, KM_SLEEP); } } else { mac_srs->srs_tcp_soft_rings = (mac_soft_ring_t **) kmem_zalloc(sizeof (mac_soft_ring_t *) * MAX_SR_FANOUT, KM_SLEEP); mac_srs->srs_udp_soft_rings = (mac_soft_ring_t **) kmem_zalloc(sizeof (mac_soft_ring_t *) * MAX_SR_FANOUT, KM_SLEEP); mac_srs->srs_oth_soft_rings = (mac_soft_ring_t **) kmem_zalloc(sizeof (mac_soft_ring_t *) * MAX_SR_FANOUT, KM_SLEEP); } } static void mac_srs_worker_bind(mac_soft_ring_set_t *mac_srs, processorid_t cpuid) { cpu_t *cp; boolean_t clear = B_FALSE; ASSERT(MUTEX_HELD(&cpu_lock)); if (!mac_srs_thread_bind) return; cp = cpu_get(cpuid); if (cp == NULL || !cpu_is_online(cp)) return; mutex_enter(&mac_srs->srs_lock); mac_srs->srs_state |= SRS_WORKER_BOUND; if (mac_srs->srs_worker_cpuid != -1) clear = B_TRUE; mac_srs->srs_worker_cpuid = cpuid; mutex_exit(&mac_srs->srs_lock); if (clear) thread_affinity_clear(mac_srs->srs_worker); thread_affinity_set(mac_srs->srs_worker, cpuid); DTRACE_PROBE1(worker__CPU, processorid_t, cpuid); } static void mac_srs_poll_bind(mac_soft_ring_set_t *mac_srs, processorid_t cpuid) { cpu_t *cp; boolean_t clear = B_FALSE; ASSERT(MUTEX_HELD(&cpu_lock)); if (!mac_srs_thread_bind || mac_srs->srs_poll_thr == NULL) return; cp = cpu_get(cpuid); if (cp == NULL || !cpu_is_online(cp)) return; mutex_enter(&mac_srs->srs_lock); mac_srs->srs_state |= SRS_POLL_BOUND; if (mac_srs->srs_poll_cpuid != -1) clear = B_TRUE; mac_srs->srs_poll_cpuid = cpuid; mutex_exit(&mac_srs->srs_lock); if (clear) thread_affinity_clear(mac_srs->srs_poll_thr); thread_affinity_set(mac_srs->srs_poll_thr, cpuid); DTRACE_PROBE1(poll__CPU, processorid_t, cpuid); } /* * Re-target interrupt to the passed CPU. If re-target is successful, * set mc_rx_intr_cpu to the re-targeted CPU. Otherwise set it to -1. */ void mac_rx_srs_retarget_intr(mac_soft_ring_set_t *mac_srs, processorid_t cpuid) { cpu_t *cp; mac_ring_t *ring = mac_srs->srs_ring; mac_intr_t *mintr = &ring->mr_info.mri_intr; flow_entry_t *flent = mac_srs->srs_flent; boolean_t primary = mac_is_primary_client(mac_srs->srs_mcip); ASSERT(MUTEX_HELD(&cpu_lock)); /* * Don't re-target the interrupt for these cases: * 1) ring is NULL * 2) the interrupt is shared (mi_ddi_shared) * 3) ddi_handle is NULL and !primary * 4) primary, ddi_handle is NULL but fe_rx_srs_cnt > 2 * Case 3 & 4 are because of mac_client_intr_cpu() routine. * This routine will re-target fixed interrupt for primary * mac client if the client has only one ring. In that * case, mc_rx_intr_cpu will already have the correct value. */ if (ring == NULL || mintr->mi_ddi_shared || cpuid == -1 || (mintr->mi_ddi_handle == NULL && !primary) || (primary && mintr->mi_ddi_handle == NULL && flent->fe_rx_srs_cnt > 2)) { mac_srs->srs_cpu.mc_rx_intr_cpu = -1; return; } if (mintr->mi_ddi_handle == NULL) return; cp = cpu_get(cpuid); if (cp == NULL || !cpu_is_online(cp)) return; /* Drop the cpu_lock as set_intr_affinity() holds it */ mutex_exit(&cpu_lock); if (set_intr_affinity(mintr->mi_ddi_handle, cpuid) == DDI_SUCCESS) mac_srs->srs_cpu.mc_rx_intr_cpu = cpuid; else mac_srs->srs_cpu.mc_rx_intr_cpu = -1; mutex_enter(&cpu_lock); } /* * Re-target Tx interrupts */ void mac_tx_srs_retarget_intr(mac_soft_ring_set_t *mac_srs) { cpu_t *cp; mac_ring_t *ring; mac_intr_t *mintr; mac_soft_ring_t *sringp; mac_srs_tx_t *srs_tx; mac_cpus_t *srs_cpu; processorid_t cpuid; int i; ASSERT(MUTEX_HELD(&cpu_lock)); srs_cpu = &mac_srs->srs_cpu; if (MAC_TX_SOFT_RINGS(mac_srs)) { for (i = 0; i < mac_srs->srs_tx_ring_count; i++) { sringp = mac_srs->srs_tx_soft_rings[i]; ring = (mac_ring_t *)sringp->s_ring_tx_arg2; cpuid = srs_cpu->mc_tx_intr_cpu[i]; cp = cpu_get(cpuid); if (cp == NULL || !cpu_is_online(cp) || !MAC_RING_RETARGETABLE(ring)) { srs_cpu->mc_tx_retargeted_cpu[i] = -1; continue; } mintr = &ring->mr_info.mri_intr; /* * Drop the cpu_lock as set_intr_affinity() * holds it */ mutex_exit(&cpu_lock); if (set_intr_affinity(mintr->mi_ddi_handle, cpuid) == DDI_SUCCESS) { srs_cpu->mc_tx_retargeted_cpu[i] = cpuid; } else { srs_cpu->mc_tx_retargeted_cpu[i] = -1; } mutex_enter(&cpu_lock); } } else { cpuid = srs_cpu->mc_tx_intr_cpu[0]; cp = cpu_get(cpuid); if (cp == NULL || !cpu_is_online(cp)) { srs_cpu->mc_tx_retargeted_cpu[0] = -1; return; } srs_tx = &mac_srs->srs_tx; ring = (mac_ring_t *)srs_tx->st_arg2; if (MAC_RING_RETARGETABLE(ring)) { mintr = &ring->mr_info.mri_intr; mutex_exit(&cpu_lock); if ((set_intr_affinity(mintr->mi_ddi_handle, cpuid) == DDI_SUCCESS)) { srs_cpu->mc_tx_retargeted_cpu[0] = cpuid; } else { srs_cpu->mc_tx_retargeted_cpu[0] = -1; } mutex_enter(&cpu_lock); } } } /* * When a CPU comes back online, bind the MAC kernel threads which * were previously bound to that CPU, and had to be unbound because * the CPU was going away. * * These functions are called with cpu_lock held and hence we can't * cv_wait to grab the mac perimeter. Since these functions walk the soft * ring list of an SRS without being in the perimeter, the list itself * is protected by the SRS lock. */ static void mac_walk_srs_and_bind(int cpuid) { mac_soft_ring_set_t *mac_srs; mac_soft_ring_t *soft_ring; rw_enter(&mac_srs_g_lock, RW_READER); if ((mac_srs = mac_srs_g_list) == NULL) goto done; for (; mac_srs != NULL; mac_srs = mac_srs->srs_next) { if (mac_srs->srs_worker_cpuid == -1 && mac_srs->srs_worker_cpuid_save == cpuid) { mac_srs->srs_worker_cpuid_save = -1; mac_srs_worker_bind(mac_srs, cpuid); } if (!(mac_srs->srs_type & SRST_TX)) { if (mac_srs->srs_poll_cpuid == -1 && mac_srs->srs_poll_cpuid_save == cpuid) { mac_srs->srs_poll_cpuid_save = -1; mac_srs_poll_bind(mac_srs, cpuid); } } /* Next tackle the soft rings associated with the srs */ mutex_enter(&mac_srs->srs_lock); for (soft_ring = mac_srs->srs_soft_ring_head; soft_ring != NULL; soft_ring = soft_ring->s_ring_next) { if (soft_ring->s_ring_cpuid == -1 && soft_ring->s_ring_cpuid_save == cpuid) { soft_ring->s_ring_cpuid_save = -1; (void) mac_soft_ring_bind(soft_ring, cpuid); } } mutex_exit(&mac_srs->srs_lock); } done: rw_exit(&mac_srs_g_lock); } /* * Change the priority of the SRS's poll and worker thread. Additionally, * update the priority of the worker threads for the SRS's soft rings. * Need to modify any associated squeue threads. */ void mac_update_srs_priority(mac_soft_ring_set_t *mac_srs, pri_t prival) { mac_soft_ring_t *ringp; mac_srs->srs_pri = prival; thread_lock(mac_srs->srs_worker); (void) thread_change_pri(mac_srs->srs_worker, mac_srs->srs_pri, 0); thread_unlock(mac_srs->srs_worker); if (mac_srs->srs_poll_thr != NULL) { thread_lock(mac_srs->srs_poll_thr); (void) thread_change_pri(mac_srs->srs_poll_thr, mac_srs->srs_pri, 0); thread_unlock(mac_srs->srs_poll_thr); } if ((ringp = mac_srs->srs_soft_ring_head) == NULL) return; while (ringp != mac_srs->srs_soft_ring_tail) { thread_lock(ringp->s_ring_worker); (void) thread_change_pri(ringp->s_ring_worker, mac_srs->srs_pri, 0); thread_unlock(ringp->s_ring_worker); ringp = ringp->s_ring_next; } ASSERT(ringp == mac_srs->srs_soft_ring_tail); thread_lock(ringp->s_ring_worker); (void) thread_change_pri(ringp->s_ring_worker, mac_srs->srs_pri, 0); thread_unlock(ringp->s_ring_worker); } /* * Change the receive bandwidth limit. */ static void mac_rx_srs_update_bwlimit(mac_soft_ring_set_t *srs, mac_resource_props_t *mrp) { mac_soft_ring_t *softring; mutex_enter(&srs->srs_lock); mutex_enter(&srs->srs_bw->mac_bw_lock); if (mrp->mrp_maxbw == MRP_MAXBW_RESETVAL) { /* Reset bandwidth limit */ if (srs->srs_type & SRST_BW_CONTROL) { softring = srs->srs_soft_ring_head; while (softring != NULL) { softring->s_ring_type &= ~ST_RING_BW_CTL; softring = softring->s_ring_next; } srs->srs_type &= ~SRST_BW_CONTROL; srs->srs_drain_func = mac_rx_srs_drain; } } else { /* Set/Modify bandwidth limit */ srs->srs_bw->mac_bw_limit = FLOW_BYTES_PER_TICK(mrp->mrp_maxbw); /* * Give twice the queuing capability before * dropping packets. The unit is bytes/tick. */ srs->srs_bw->mac_bw_drop_threshold = srs->srs_bw->mac_bw_limit << 1; if (!(srs->srs_type & SRST_BW_CONTROL)) { softring = srs->srs_soft_ring_head; while (softring != NULL) { softring->s_ring_type |= ST_RING_BW_CTL; softring = softring->s_ring_next; } srs->srs_type |= SRST_BW_CONTROL; srs->srs_drain_func = mac_rx_srs_drain_bw; } } done: mutex_exit(&srs->srs_bw->mac_bw_lock); mutex_exit(&srs->srs_lock); } /* Change the transmit bandwidth limit */ static void mac_tx_srs_update_bwlimit(mac_soft_ring_set_t *srs, mac_resource_props_t *mrp) { uint32_t tx_mode, ring_info = 0; mac_srs_tx_t *srs_tx = &srs->srs_tx; mac_client_impl_t *mcip = srs->srs_mcip; /* * We need to quiesce/restart the client here because mac_tx() and * srs->srs_tx->st_func do not hold srs->srs_lock while accessing * st_mode and related fields, which are modified by the code below. */ mac_tx_client_quiesce((mac_client_handle_t)mcip); mutex_enter(&srs->srs_lock); mutex_enter(&srs->srs_bw->mac_bw_lock); tx_mode = srs_tx->st_mode; if (mrp->mrp_maxbw == MRP_MAXBW_RESETVAL) { /* Reset bandwidth limit */ if (tx_mode == SRS_TX_BW) { if (srs_tx->st_arg2 != NULL) ring_info = mac_hwring_getinfo(srs_tx->st_arg2); if (mac_tx_serialize || (ring_info & MAC_RING_TX_SERIALIZE)) { srs_tx->st_mode = SRS_TX_SERIALIZE; } else { srs_tx->st_mode = SRS_TX_DEFAULT; } } else if (tx_mode == SRS_TX_BW_FANOUT) { srs_tx->st_mode = SRS_TX_FANOUT; } else if (tx_mode == SRS_TX_BW_AGGR) { srs_tx->st_mode = SRS_TX_AGGR; } srs->srs_type &= ~SRST_BW_CONTROL; } else { /* Set/Modify bandwidth limit */ srs->srs_bw->mac_bw_limit = FLOW_BYTES_PER_TICK(mrp->mrp_maxbw); /* * Give twice the queuing capability before * dropping packets. The unit is bytes/tick. */ srs->srs_bw->mac_bw_drop_threshold = srs->srs_bw->mac_bw_limit << 1; srs->srs_type |= SRST_BW_CONTROL; if (tx_mode != SRS_TX_BW && tx_mode != SRS_TX_BW_FANOUT && tx_mode != SRS_TX_BW_AGGR) { if (tx_mode == SRS_TX_SERIALIZE || tx_mode == SRS_TX_DEFAULT) { srs_tx->st_mode = SRS_TX_BW; } else if (tx_mode == SRS_TX_FANOUT) { srs_tx->st_mode = SRS_TX_BW_FANOUT; } else if (tx_mode == SRS_TX_AGGR) { srs_tx->st_mode = SRS_TX_BW_AGGR; } else { ASSERT(0); } } } done: srs_tx->st_func = mac_tx_get_func(srs_tx->st_mode); mutex_exit(&srs->srs_bw->mac_bw_lock); mutex_exit(&srs->srs_lock); mac_tx_client_restart((mac_client_handle_t)mcip); } /* * The uber function that deals with any update to bandwidth limits. */ void mac_srs_update_bwlimit(flow_entry_t *flent, mac_resource_props_t *mrp) { int count; for (count = 0; count < flent->fe_rx_srs_cnt; count++) mac_rx_srs_update_bwlimit(flent->fe_rx_srs[count], mrp); mac_tx_srs_update_bwlimit(flent->fe_tx_srs, mrp); } void mac_srs_change_upcall(void *arg, mac_direct_rx_t rx_func, void *rx_arg1) { mac_soft_ring_set_t *mac_srs = arg; mac_srs_rx_t *srs_rx = &mac_srs->srs_rx; mac_soft_ring_t *softring; mutex_enter(&mac_srs->srs_lock); ASSERT((mac_srs->srs_type & SRST_TX) == 0); srs_rx->sr_func = rx_func; srs_rx->sr_arg1 = rx_arg1; softring = mac_srs->srs_soft_ring_head; while (softring != NULL) { mutex_enter(&softring->s_ring_lock); softring->s_ring_rx_func = rx_func; softring->s_ring_rx_arg1 = rx_arg1; mutex_exit(&softring->s_ring_lock); softring = softring->s_ring_next; } mutex_exit(&mac_srs->srs_lock); } /* * When the first sub-flow is added to a link, we disable polling on the * link and also modify the entry point to mac_rx_srs_subflow_process. * (polling is disabled because with the subflow added, accounting * for polling needs additional logic, it is assumed that when a subflow is * added, we can take some hit as a result of disabling polling rather than * adding more complexity - if this becomes a perf. issue we need to * re-rvaluate this logic). When the last subflow is removed, we turn back * polling and also reset the entry point to mac_rx_srs_process. * * In the future if there are multiple SRS, we can simply * take one and give it to the flow rather than disabling polling and * resetting the entry point. */ void mac_client_update_classifier(mac_client_impl_t *mcip, boolean_t enable) { flow_entry_t *flent = mcip->mci_flent; int i; mac_impl_t *mip = mcip->mci_mip; mac_rx_func_t rx_func; uint_t rx_srs_cnt; boolean_t enable_classifier; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); enable_classifier = !FLOW_TAB_EMPTY(mcip->mci_subflow_tab) && enable; rx_func = enable_classifier ? mac_rx_srs_subflow_process : mac_rx_srs_process; /* Tell mac_srs_poll_state_change to disable polling if necessary */ if (mip->mi_state_flags & MIS_POLL_DISABLE) enable_classifier = B_TRUE; /* * If receive function has already been configured correctly for * current subflow configuration, do nothing. */ if (flent->fe_cb_fn == (flow_fn_t)rx_func) return; rx_srs_cnt = flent->fe_rx_srs_cnt; for (i = 0; i < rx_srs_cnt; i++) { ASSERT(flent->fe_rx_srs[i] != NULL); mac_srs_poll_state_change(flent->fe_rx_srs[i], enable_classifier, rx_func); } /* * Change the S/W classifier so that we can land in the * correct processing function with correct argument. * If all subflows have been removed we can revert to * mac_rx_srsprocess, else we need mac_rx_srs_subflow_process. */ mutex_enter(&flent->fe_lock); flent->fe_cb_fn = (flow_fn_t)rx_func; flent->fe_cb_arg1 = (void *)mip; flent->fe_cb_arg2 = flent->fe_rx_srs[0]; mutex_exit(&flent->fe_lock); } static void mac_srs_update_fanout_list(mac_soft_ring_set_t *mac_srs) { int tcp_count = 0, udp_count = 0, oth_count = 0, tx_count = 0; mac_soft_ring_t *softring; softring = mac_srs->srs_soft_ring_head; if (softring == NULL) { ASSERT(mac_srs->srs_soft_ring_count == 0); mac_srs->srs_tcp_ring_count = 0; mac_srs->srs_udp_ring_count = 0; mac_srs->srs_oth_ring_count = 0; mac_srs->srs_tx_ring_count = 0; return; } while (softring != NULL) { if (softring->s_ring_type & ST_RING_TCP) { mac_srs->srs_tcp_soft_rings[tcp_count++] = softring; } else if (softring->s_ring_type & ST_RING_UDP) { mac_srs->srs_udp_soft_rings[udp_count++] = softring; } else if (softring->s_ring_type & ST_RING_OTH) { mac_srs->srs_oth_soft_rings[oth_count++] = softring; } else { ASSERT(softring->s_ring_type & ST_RING_TX); mac_srs->srs_tx_soft_rings[tx_count++] = softring; } softring = softring->s_ring_next; } ASSERT(mac_srs->srs_soft_ring_count == (tcp_count + udp_count + oth_count + tx_count)); mac_srs->srs_tcp_ring_count = tcp_count; mac_srs->srs_udp_ring_count = udp_count; mac_srs->srs_oth_ring_count = oth_count; mac_srs->srs_tx_ring_count = tx_count; } void mac_srs_create_proto_softrings(int id, uint16_t type, pri_t pri, mac_client_impl_t *mcip, mac_soft_ring_set_t *mac_srs, processorid_t cpuid, mac_direct_rx_t rx_func, void *x_arg1, mac_resource_handle_t x_arg2, boolean_t set_bypass) { mac_soft_ring_t *softring; mac_rx_fifo_t mrf; bzero(&mrf, sizeof (mac_rx_fifo_t)); mrf.mrf_type = MAC_RX_FIFO; mrf.mrf_receive = (mac_receive_t)mac_soft_ring_poll; mrf.mrf_intr_enable = (mac_intr_enable_t)mac_soft_ring_intr_enable; mrf.mrf_intr_disable = (mac_intr_disable_t)mac_soft_ring_intr_disable; mrf.mrf_flow_priority = pri; softring = mac_soft_ring_create(id, mac_soft_ring_worker_wait, (type|ST_RING_TCP), pri, mcip, mac_srs, cpuid, rx_func, x_arg1, x_arg2); softring->s_ring_rx_arg2 = NULL; /* * TCP and UDP support DLS bypass. In addition TCP * squeue can also poll their corresponding soft rings. */ if (set_bypass && (mcip->mci_resource_arg != NULL)) { mac_soft_ring_dls_bypass(softring, mcip->mci_direct_rx_fn, mcip->mci_direct_rx_arg); mrf.mrf_rx_arg = softring; mrf.mrf_intr_handle = (mac_intr_handle_t)softring; /* * Make a call in IP to get a TCP squeue assigned to * this softring to maintain full CPU locality through * the stack and allow the squeue to be able to poll * the softring so the flow control can be pushed * all the way to H/W. */ softring->s_ring_rx_arg2 = mcip->mci_resource_add((void *)mcip->mci_resource_arg, (mac_resource_t *)&mrf); } /* * Non-TCP protocols don't support squeues. Hence we * don't make any ring addition callbacks for non-TCP * rings. Now create the UDP softring and allow it to * bypass the DLS layer. */ softring = mac_soft_ring_create(id, mac_soft_ring_worker_wait, (type|ST_RING_UDP), pri, mcip, mac_srs, cpuid, rx_func, x_arg1, x_arg2); softring->s_ring_rx_arg2 = NULL; if (set_bypass && (mcip->mci_resource_arg != NULL)) { mac_soft_ring_dls_bypass(softring, mcip->mci_direct_rx_fn, mcip->mci_direct_rx_arg); } /* Create the Oth softrings which has to go through the DLS */ softring = mac_soft_ring_create(id, mac_soft_ring_worker_wait, (type|ST_RING_OTH), pri, mcip, mac_srs, cpuid, rx_func, x_arg1, x_arg2); softring->s_ring_rx_arg2 = NULL; } /* * This routine associates a CPU or a set of CPU to process incoming * traffic from a mac client. If multiple CPUs are specified, then * so many soft rings are created with each soft ring worker thread * bound to a CPU in the set. Each soft ring in turn will be * associated with an squeue and the squeue will be moved to the * same CPU as that of the soft ring's. */ static void mac_srs_fanout_modify(mac_client_impl_t *mcip, mac_direct_rx_t rx_func, void *x_arg1, mac_resource_handle_t x_arg2, mac_soft_ring_set_t *mac_rx_srs, mac_soft_ring_set_t *mac_tx_srs) { mac_soft_ring_t *softring; uint32_t soft_ring_flag = 0; processorid_t cpuid = -1; int i, srings_present, new_fanout_cnt; mac_cpus_t *srs_cpu; /* fanout state is REINIT. Set it back to INIT */ ASSERT(mac_rx_srs->srs_fanout_state == SRS_FANOUT_REINIT); mac_rx_srs->srs_fanout_state = SRS_FANOUT_INIT; /* how many are present right now */ srings_present = mac_rx_srs->srs_tcp_ring_count; /* new request */ srs_cpu = &mac_rx_srs->srs_cpu; new_fanout_cnt = srs_cpu->mc_rx_fanout_cnt; mutex_enter(&mac_rx_srs->srs_lock); if (mac_rx_srs->srs_type & SRST_BW_CONTROL) soft_ring_flag |= ST_RING_BW_CTL; mutex_exit(&mac_rx_srs->srs_lock); if (new_fanout_cnt > srings_present) { /* soft rings increased */ mutex_enter(&mac_rx_srs->srs_lock); mac_rx_srs->srs_type |= SRST_FANOUT_SRC_IP; mutex_exit(&mac_rx_srs->srs_lock); for (i = mac_rx_srs->srs_tcp_ring_count; i < new_fanout_cnt; i++) { /* * Create the protocol softrings and set the * DLS bypass where possible. */ mac_srs_create_proto_softrings(i, soft_ring_flag, mac_rx_srs->srs_pri, mcip, mac_rx_srs, cpuid, rx_func, x_arg1, x_arg2, B_TRUE); } mac_srs_update_fanout_list(mac_rx_srs); } else if (new_fanout_cnt < srings_present) { /* soft rings decreased */ if (new_fanout_cnt == 1) { mutex_enter(&mac_rx_srs->srs_lock); mac_rx_srs->srs_type &= ~SRST_FANOUT_SRC_IP; ASSERT(mac_rx_srs->srs_type & SRST_FANOUT_PROTO); mutex_exit(&mac_rx_srs->srs_lock); } /* Get rid of extra soft rings */ for (i = new_fanout_cnt; i < mac_rx_srs->srs_tcp_ring_count; i++) { softring = mac_rx_srs->srs_tcp_soft_rings[i]; if (softring->s_ring_rx_arg2 != NULL) { mcip->mci_resource_remove( (void *)mcip->mci_resource_arg, softring->s_ring_rx_arg2); } mac_soft_ring_remove(mac_rx_srs, mac_rx_srs->srs_tcp_soft_rings[i]); mac_soft_ring_remove(mac_rx_srs, mac_rx_srs->srs_udp_soft_rings[i]); mac_soft_ring_remove(mac_rx_srs, mac_rx_srs->srs_oth_soft_rings[i]); } mac_srs_update_fanout_list(mac_rx_srs); } ASSERT(new_fanout_cnt == mac_rx_srs->srs_tcp_ring_count); mutex_enter(&cpu_lock); for (i = 0; i < mac_rx_srs->srs_tcp_ring_count; i++) { cpuid = srs_cpu->mc_rx_fanout_cpus[i]; (void) mac_soft_ring_bind(mac_rx_srs->srs_udp_soft_rings[i], cpuid); (void) mac_soft_ring_bind(mac_rx_srs->srs_oth_soft_rings[i], cpuid); (void) mac_soft_ring_bind(mac_rx_srs->srs_tcp_soft_rings[i], cpuid); softring = mac_rx_srs->srs_tcp_soft_rings[i]; if (softring->s_ring_rx_arg2 != NULL) { mcip->mci_resource_bind((void *)mcip->mci_resource_arg, softring->s_ring_rx_arg2, cpuid); } } mac_srs_worker_bind(mac_rx_srs, srs_cpu->mc_rx_workerid); mac_srs_poll_bind(mac_rx_srs, srs_cpu->mc_rx_pollid); mac_rx_srs_retarget_intr(mac_rx_srs, srs_cpu->mc_rx_intr_cpu); /* * Bind Tx srs and soft ring threads too. Let's bind tx * srs to the last cpu in mrp list. */ if (mac_tx_srs != NULL) { BIND_TX_SRS_AND_SOFT_RINGS(mac_tx_srs, mrp); mac_tx_srs_retarget_intr(mac_tx_srs); } mutex_exit(&cpu_lock); } /* * Bind SRS threads and soft rings to CPUs/create fanout list. */ void mac_srs_fanout_init(mac_client_impl_t *mcip, mac_resource_props_t *mrp, mac_direct_rx_t rx_func, void *x_arg1, mac_resource_handle_t x_arg2, mac_soft_ring_set_t *mac_rx_srs, mac_soft_ring_set_t *mac_tx_srs, cpupart_t *cpupart) { int i; processorid_t cpuid; uint32_t soft_ring_flag = 0; int soft_ring_cnt; mac_cpus_t *srs_cpu = &mac_rx_srs->srs_cpu; /* * Remove the no soft ring flag and we will adjust it * appropriately further down. */ mutex_enter(&mac_rx_srs->srs_lock); mac_rx_srs->srs_type &= ~SRST_NO_SOFT_RINGS; mutex_exit(&mac_rx_srs->srs_lock); ASSERT(mac_rx_srs->srs_soft_ring_head == NULL); if (mac_rx_srs->srs_type & SRST_BW_CONTROL) soft_ring_flag |= ST_RING_BW_CTL; ASSERT(mac_rx_srs->srs_fanout_state == SRS_FANOUT_UNINIT); mac_rx_srs->srs_fanout_state = SRS_FANOUT_INIT; /* * Ring count can be 0 if no fanout is required and no cpu * were specified. Leave the SRS worker and poll thread * unbound */ ASSERT(mrp != NULL); soft_ring_cnt = srs_cpu->mc_rx_fanout_cnt; /* Step 1: bind cpu contains cpu list where threads need to bind */ if (soft_ring_cnt > 0) { mutex_enter(&cpu_lock); for (i = 0; i < soft_ring_cnt; i++) { cpuid = srs_cpu->mc_rx_fanout_cpus[i]; /* Create the protocol softrings */ mac_srs_create_proto_softrings(i, soft_ring_flag, mac_rx_srs->srs_pri, mcip, mac_rx_srs, cpuid, rx_func, x_arg1, x_arg2, B_FALSE); } mac_srs_worker_bind(mac_rx_srs, srs_cpu->mc_rx_workerid); mac_srs_poll_bind(mac_rx_srs, srs_cpu->mc_rx_pollid); mac_rx_srs_retarget_intr(mac_rx_srs, srs_cpu->mc_rx_intr_cpu); /* * Bind Tx srs and soft ring threads too. * Let's bind tx srs to the last cpu in * mrp list. */ if (mac_tx_srs == NULL) { mutex_exit(&cpu_lock); goto alldone; } BIND_TX_SRS_AND_SOFT_RINGS(mac_tx_srs, mrp); mac_tx_srs_retarget_intr(mac_tx_srs); mutex_exit(&cpu_lock); } else { mutex_enter(&cpu_lock); /* * For a subflow, mrp_workerid and mrp_pollid * is not set. */ mac_srs_worker_bind(mac_rx_srs, mrp->mrp_rx_workerid); mac_srs_poll_bind(mac_rx_srs, mrp->mrp_rx_pollid); mutex_exit(&cpu_lock); goto no_softrings; } alldone: if (soft_ring_cnt > 1) mac_rx_srs->srs_type |= SRST_FANOUT_SRC_IP; mac_srs_update_fanout_list(mac_rx_srs); mac_srs_client_poll_enable(mcip, mac_rx_srs); return; no_softrings: if (mac_rx_srs->srs_type & SRST_FANOUT_PROTO) { mutex_enter(&cpu_lock); cpuid = mac_next_bind_cpu(cpupart); /* Create the protocol softrings */ mac_srs_create_proto_softrings(0, soft_ring_flag, mac_rx_srs->srs_pri, mcip, mac_rx_srs, cpuid, rx_func, x_arg1, x_arg2, B_FALSE); mutex_exit(&cpu_lock); } else { /* * This is the case when there is no fanout which is * true for subflows. */ mac_rx_srs->srs_type |= SRST_NO_SOFT_RINGS; } mac_srs_update_fanout_list(mac_rx_srs); mac_srs_client_poll_enable(mcip, mac_rx_srs); } /* * mac_fanout_setup: * * Calls mac_srs_fanout_init() or modify() depending upon whether * the SRS is getting initialized or re-initialized. */ void mac_fanout_setup(mac_client_impl_t *mcip, flow_entry_t *flent, mac_resource_props_t *mrp, mac_direct_rx_t rx_func, void *x_arg1, mac_resource_handle_t x_arg2, cpupart_t *cpupart) { mac_soft_ring_set_t *mac_rx_srs, *mac_tx_srs; int i, rx_srs_cnt; ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip)); /* * This is an aggregation port. Fanout will be setup * over the aggregation itself. */ if (mcip->mci_state_flags & MCIS_EXCLUSIVE) return; mac_rx_srs = flent->fe_rx_srs[0]; /* * Set up the fanout on the tx side only once, with the * first rx SRS. The CPU binding, fanout, and bandwidth * criteria are common to both RX and TX, so * initializing them along side avoids redundant code. */ mac_tx_srs = flent->fe_tx_srs; rx_srs_cnt = flent->fe_rx_srs_cnt; /* No fanout for subflows */ if (flent->fe_type & FLOW_USER) { mac_srs_fanout_init(mcip, mrp, rx_func, x_arg1, x_arg2, mac_rx_srs, mac_tx_srs, cpupart); return; } if (mrp->mrp_mask & MRP_CPUS_USERSPEC) mac_flow_user_cpu_init(flent, mrp); else mac_flow_cpu_init(flent, cpupart); mrp->mrp_rx_fanout_cnt = mac_rx_srs->srs_cpu.mc_rx_fanout_cnt; /* * Set up fanout for both SW (0th SRS) and HW classified * SRS (the rest of Rx SRSs in flent). */ for (i = 0; i < rx_srs_cnt; i++) { mac_rx_srs = flent->fe_rx_srs[i]; if (i != 0) mac_tx_srs = NULL; switch (mac_rx_srs->srs_fanout_state) { case SRS_FANOUT_UNINIT: mac_srs_fanout_init(mcip, mrp, rx_func, x_arg1, x_arg2, mac_rx_srs, mac_tx_srs, cpupart); break; case SRS_FANOUT_INIT: break; case SRS_FANOUT_REINIT: mac_rx_srs_quiesce(mac_rx_srs, SRS_QUIESCE); mac_srs_fanout_modify(mcip, rx_func, x_arg1, x_arg2, mac_rx_srs, mac_tx_srs); mac_rx_srs_restart(mac_rx_srs); break; default: VERIFY(mac_rx_srs->srs_fanout_state <= SRS_FANOUT_REINIT); break; } } } /* * mac_srs_create: * * Create a mac_soft_ring_set_t (SRS). If soft_ring_fanout_type is * SRST_TX, an SRS for Tx side is created. Otherwise an SRS for Rx side * processing is created. * * Details on Rx SRS: * Create a SRS and also add the necessary soft rings for TCP and * non-TCP based on fanout type and count specified. * * mac_soft_ring_fanout, mac_srs_fanout_modify (?), * mac_soft_ring_stop_workers, mac_soft_ring_set_destroy, etc need * to be heavily modified. * * mi_soft_ring_list_size, mi_soft_ring_size, etc need to disappear. */ mac_soft_ring_set_t * mac_srs_create(mac_client_impl_t *mcip, flow_entry_t *flent, uint32_t srs_type, mac_direct_rx_t rx_func, void *x_arg1, mac_resource_handle_t x_arg2, mac_ring_t *ring) { mac_soft_ring_set_t *mac_srs; mac_srs_rx_t *srs_rx; mac_srs_tx_t *srs_tx; mac_bw_ctl_t *mac_bw; mac_resource_props_t *mrp; boolean_t is_tx_srs = ((srs_type & SRST_TX) != 0); mac_srs = kmem_cache_alloc(mac_srs_cache, KM_SLEEP); bzero(mac_srs, sizeof (mac_soft_ring_set_t)); srs_rx = &mac_srs->srs_rx; srs_tx = &mac_srs->srs_tx; mutex_enter(&flent->fe_lock); /* * Get the bandwidth control structure from the flent. Get * rid of any residual values in the control structure for * the tx bw struct and also for the rx, if the rx srs is * the 1st one being brought up (the rx bw ctl struct may * be shared by multiple SRSs) */ if (is_tx_srs) { mac_srs->srs_bw = &flent->fe_tx_bw; bzero(mac_srs->srs_bw, sizeof (mac_bw_ctl_t)); flent->fe_tx_srs = mac_srs; } else { /* * The bw counter (stored in the flent) is shared * by SRS's within an rx group. */ mac_srs->srs_bw = &flent->fe_rx_bw; /* First rx SRS, clear the bw structure */ if (flent->fe_rx_srs_cnt == 0) bzero(mac_srs->srs_bw, sizeof (mac_bw_ctl_t)); /* * It is better to panic here rather than just assert because * on a non-debug kernel we might end up courrupting memory * and making it difficult to debug. */ if (flent->fe_rx_srs_cnt >= MAX_RINGS_PER_GROUP) { panic("Array Overrun detected due to MAC client %p " " having more rings than %d", (void *)mcip, MAX_RINGS_PER_GROUP); } flent->fe_rx_srs[flent->fe_rx_srs_cnt] = mac_srs; flent->fe_rx_srs_cnt++; } mac_srs->srs_flent = flent; mutex_exit(&flent->fe_lock); mac_srs->srs_state = 0; mac_srs->srs_type = (srs_type | SRST_NO_SOFT_RINGS); mac_srs->srs_worker_cpuid = mac_srs->srs_worker_cpuid_save = -1; mac_srs->srs_poll_cpuid = mac_srs->srs_poll_cpuid_save = -1; mac_srs->srs_mcip = mcip; mac_srs_fanout_list_alloc(mac_srs); /* * For a flow we use the underlying MAC client's priority range with * the priority value to find an absolute priority value. For a MAC * client we use the MAC client's maximum priority as the value. */ mrp = &flent->fe_effective_props; if ((mac_srs->srs_type & SRST_FLOW) != 0) { mac_srs->srs_pri = FLOW_PRIORITY(mcip->mci_min_pri, mcip->mci_max_pri, mrp->mrp_priority); } else { mac_srs->srs_pri = mcip->mci_max_pri; } /* * We need to insert the SRS in the global list before * binding the SRS and SR threads. Otherwise there is a * is a small window where the cpu reconfig callbacks * may miss the SRS in the list walk and DR could fail * as there are bound threads. */ mac_srs_add_glist(mac_srs); /* Initialize bw limit */ if ((mrp->mrp_mask & MRP_MAXBW) != 0) { mac_srs->srs_drain_func = mac_rx_srs_drain_bw; mac_bw = mac_srs->srs_bw; mutex_enter(&mac_bw->mac_bw_lock); mac_bw->mac_bw_limit = FLOW_BYTES_PER_TICK(mrp->mrp_maxbw); /* * Give twice the queuing capability before * dropping packets. The unit is bytes/tick. */ mac_bw->mac_bw_drop_threshold = mac_bw->mac_bw_limit << 1; mutex_exit(&mac_bw->mac_bw_lock); mac_srs->srs_type |= SRST_BW_CONTROL; } else { mac_srs->srs_drain_func = mac_rx_srs_drain; } /* * We use the following policy to control Receive * Side Dynamic Polling: * 1) We switch to poll mode anytime the processing thread causes * a backlog to build up in SRS and its associated Soft Rings * (sr_poll_pkt_cnt > 0). * 2) As long as the backlog stays under the low water mark * (sr_lowat), we poll the H/W for more packets. * 3) If the backlog (sr_poll_pkt_cnt) exceeds low water mark, we * stay in poll mode but don't poll the H/W for more packets. * 4) Anytime in polling mode, if we poll the H/W for packets and * find nothing plus we have an existing backlog * (sr_poll_pkt_cnt > 0), we stay in polling mode but don't poll * the H/W for packets anymore (let the polling thread go to sleep). * 5) Once the backlog is relived (packets are processed) we reenable * polling (by signalling the poll thread) only when the backlog * dips below sr_poll_thres. * 6) sr_hiwat is used exclusively when we are not polling capable * and is used to decide when to drop packets so the SRS queue * length doesn't grow infinitely. */ if (!is_tx_srs) { srs_rx->sr_hiwat = mac_soft_ring_max_q_cnt; /* Low water mark needs to be less than high water mark */ srs_rx->sr_lowat = mac_soft_ring_min_q_cnt <= mac_soft_ring_max_q_cnt ? mac_soft_ring_min_q_cnt : (mac_soft_ring_max_q_cnt >> 2); /* Poll threshold need to be half of low water mark or less */ srs_rx->sr_poll_thres = mac_soft_ring_poll_thres <= (srs_rx->sr_lowat >> 1) ? mac_soft_ring_poll_thres : (srs_rx->sr_lowat >> 1); if (mac_latency_optimize) mac_srs->srs_state |= SRS_LATENCY_OPT; else mac_srs->srs_state |= SRS_SOFTRING_QUEUE; } mac_srs->srs_worker = thread_create(NULL, 0, mac_srs_worker, mac_srs, 0, &p0, TS_RUN, mac_srs->srs_pri); if (is_tx_srs) { /* Handle everything about Tx SRS and return */ mac_srs->srs_drain_func = mac_tx_srs_drain; srs_tx->st_max_q_cnt = mac_tx_srs_max_q_cnt; srs_tx->st_hiwat = (mac_tx_srs_hiwat > mac_tx_srs_max_q_cnt) ? mac_tx_srs_max_q_cnt : mac_tx_srs_hiwat; srs_tx->st_arg1 = x_arg1; srs_tx->st_arg2 = x_arg2; goto done; } if ((srs_type & SRST_FLOW) != 0 || FLOW_TAB_EMPTY(mcip->mci_subflow_tab)) srs_rx->sr_lower_proc = mac_rx_srs_process; else srs_rx->sr_lower_proc = mac_rx_srs_subflow_process; srs_rx->sr_func = rx_func; srs_rx->sr_arg1 = x_arg1; srs_rx->sr_arg2 = x_arg2; if (ring != NULL) { uint_t ring_info; /* Is the mac_srs created over the RX default group? */ if (ring->mr_gh == (mac_group_handle_t) MAC_DEFAULT_RX_GROUP(mcip->mci_mip)) { mac_srs->srs_type |= SRST_DEFAULT_GRP; } mac_srs->srs_ring = ring; ring->mr_srs = mac_srs; ring->mr_classify_type = MAC_HW_CLASSIFIER; ring->mr_flag |= MR_INCIPIENT; if (!(mcip->mci_mip->mi_state_flags & MIS_POLL_DISABLE) && FLOW_TAB_EMPTY(mcip->mci_subflow_tab) && mac_poll_enable) mac_srs->srs_state |= SRS_POLLING_CAPAB; mac_srs->srs_poll_thr = thread_create(NULL, 0, mac_rx_srs_poll_ring, mac_srs, 0, &p0, TS_RUN, mac_srs->srs_pri); /* * Some drivers require serialization and don't send * packet chains in interrupt context. For such * drivers, we should always queue in soft ring * so that we get a chance to switch into a polling * mode under backlog. */ ring_info = mac_hwring_getinfo((mac_ring_handle_t)ring); if (ring_info & MAC_RING_RX_ENQUEUE) mac_srs->srs_state |= SRS_SOFTRING_QUEUE; } done: mac_srs_stat_create(mac_srs); return (mac_srs); } /* * Figure out the number of soft rings required. Its dependant on * if protocol fanout is required (for LINKs), global settings * require us to do fanout for performance (based on mac_soft_ring_enable), * or user has specifically requested fanout. */ static uint32_t mac_find_fanout(flow_entry_t *flent, uint32_t link_type) { uint32_t fanout_type; mac_resource_props_t *mrp = &flent->fe_effective_props; /* no fanout for subflows */ switch (link_type) { case SRST_FLOW: fanout_type = SRST_NO_SOFT_RINGS; break; case SRST_LINK: fanout_type = SRST_FANOUT_PROTO; break; } /* A primary NIC/link is being plumbed */ if (flent->fe_type & FLOW_PRIMARY_MAC) { if (mac_soft_ring_enable && mac_rx_soft_ring_count > 1) { fanout_type |= SRST_FANOUT_SRC_IP; } } else if (flent->fe_type & FLOW_VNIC) { /* A VNIC is being created */ if (mrp != NULL && mrp->mrp_ncpus > 0) { fanout_type |= SRST_FANOUT_SRC_IP; } } return (fanout_type); } /* * Change a group from h/w to s/w classification. */ void mac_rx_switch_grp_to_sw(mac_group_t *group) { mac_ring_t *ring; mac_soft_ring_set_t *mac_srs; for (ring = group->mrg_rings; ring != NULL; ring = ring->mr_next) { if (ring->mr_classify_type == MAC_HW_CLASSIFIER) { /* * Remove the SRS associated with the HW ring. * As a result, polling will be disabled. */ mac_srs = ring->mr_srs; ASSERT(mac_srs != NULL); mac_rx_srs_remove(mac_srs); ring->mr_srs = NULL; } if (ring->mr_state != MR_INUSE) (void) mac_start_ring(ring); /* * We need to perform SW classification * for packets landing in these rings */ ring->mr_flag = 0; ring->mr_classify_type = MAC_SW_CLASSIFIER; } } /* * Create the Rx SRS for S/W classifier and for each ring in the * group (if exclusive group). Also create the Tx SRS. */ void mac_srs_group_setup(mac_client_impl_t *mcip, flow_entry_t *flent, uint32_t link_type) { cpupart_t *cpupart; mac_resource_props_t *mrp = MCIP_RESOURCE_PROPS(mcip); mac_resource_props_t *emrp = MCIP_EFFECTIVE_PROPS(mcip); boolean_t use_default = B_FALSE; mac_rx_srs_group_setup(mcip, flent, link_type); mac_tx_srs_group_setup(mcip, flent, link_type); pool_lock(); cpupart = mac_pset_find(mrp, &use_default); mac_fanout_setup(mcip, flent, MCIP_RESOURCE_PROPS(mcip), mac_rx_deliver, mcip, NULL, cpupart); mac_set_pool_effective(use_default, cpupart, mrp, emrp); pool_unlock(); } /* * Set up the RX SRSs. If the S/W SRS is not set, set it up, if there * is a group associated with this MAC client, set up SRSs for individual * h/w rings. */ void mac_rx_srs_group_setup(mac_client_impl_t *mcip, flow_entry_t *flent, uint32_t link_type) { mac_impl_t *mip = mcip->mci_mip; mac_soft_ring_set_t *mac_srs; mac_ring_t *ring; uint32_t fanout_type; mac_group_t *rx_group = flent->fe_rx_ring_group; fanout_type = mac_find_fanout(flent, link_type); /* Create the SRS for S/W classification if none exists */ if (flent->fe_rx_srs[0] == NULL) { ASSERT(flent->fe_rx_srs_cnt == 0); /* Setup the Rx SRS */ mac_srs = mac_srs_create(mcip, flent, fanout_type | link_type, mac_rx_deliver, mcip, NULL, NULL); mutex_enter(&flent->fe_lock); flent->fe_cb_fn = (flow_fn_t)mac_srs->srs_rx.sr_lower_proc; flent->fe_cb_arg1 = (void *)mip; flent->fe_cb_arg2 = (void *)mac_srs; mutex_exit(&flent->fe_lock); } if (rx_group == NULL) return; /* * fanout for default SRS is done when default SRS are created * above. As each ring is added to the group, we setup the * SRS and fanout to it. */ switch (rx_group->mrg_state) { case MAC_GROUP_STATE_RESERVED: for (ring = rx_group->mrg_rings; ring != NULL; ring = ring->mr_next) { switch (ring->mr_state) { case MR_INUSE: case MR_FREE: if (ring->mr_srs != NULL) break; if (ring->mr_state != MR_INUSE) (void) mac_start_ring(ring); /* * Since the group is exclusively ours create * an SRS for this ring to allow the * individual SRS to dynamically poll the * ring. Do this only if the client is not * a VLAN MAC client, since for VLAN we do * s/w classification for the VID check, and * if it has a unicast address. */ if ((mcip->mci_state_flags & MCIS_NO_UNICAST_ADDR) || i_mac_flow_vid(mcip->mci_flent) != VLAN_ID_NONE) { break; } mac_srs = mac_srs_create(mcip, flent, fanout_type | link_type, mac_rx_deliver, mcip, NULL, ring); break; default: cmn_err(CE_PANIC, "srs_setup: mcip = %p " "trying to add UNKNOWN ring = %p\n", (void *)mcip, (void *)ring); break; } } break; case MAC_GROUP_STATE_SHARED: /* * Set all rings of this group to software classified. * * If the group is current RESERVED, the existing mac * client (the only client on this group) is using * this group exclusively. In that case we need to * disable polling on the rings of the group (if it * was enabled), and free the SRS associated with the * rings. */ mac_rx_switch_grp_to_sw(rx_group); break; default: ASSERT(B_FALSE); break; } } /* * Set up the TX SRS. */ void mac_tx_srs_group_setup(mac_client_impl_t *mcip, flow_entry_t *flent, uint32_t link_type) { int cnt; int ringcnt; mac_ring_t *ring; mac_group_t *grp; /* * If we are opened exclusively (like aggr does for aggr_ports), * don't set up Tx SRS and Tx soft rings as they won't be used. * The same thing has to be done for Rx side also. See bug: * 6880080 */ if (mcip->mci_state_flags & MCIS_EXCLUSIVE) { /* * If we have rings, start them here. */ if (flent->fe_tx_ring_group == NULL) return; grp = (mac_group_t *)flent->fe_tx_ring_group; ringcnt = grp->mrg_cur_count; ring = grp->mrg_rings; for (cnt = 0; cnt < ringcnt; cnt++) { if (ring->mr_state != MR_INUSE) { (void) mac_start_ring(ring); } ring = ring->mr_next; } return; } if (flent->fe_tx_srs == NULL) { (void) mac_srs_create(mcip, flent, SRST_TX | link_type, NULL, mcip, NULL, NULL); } mac_tx_srs_setup(mcip, flent); } /* * Remove all the RX SRSs. If we want to remove only the SRSs associated * with h/w rings, leave the S/W SRS alone. This is used when we want to * move the MAC client from one group to another, so we need to teardown * on the h/w SRSs. */ void mac_rx_srs_group_teardown(flow_entry_t *flent, boolean_t hwonly) { mac_soft_ring_set_t *mac_srs; int i; int count = flent->fe_rx_srs_cnt; for (i = 0; i < count; i++) { if (i == 0 && hwonly) continue; mac_srs = flent->fe_rx_srs[i]; mac_rx_srs_quiesce(mac_srs, SRS_CONDEMNED); mac_srs_free(mac_srs); flent->fe_rx_srs[i] = NULL; flent->fe_rx_srs_cnt--; } ASSERT(!hwonly || flent->fe_rx_srs_cnt == 1); ASSERT(hwonly || flent->fe_rx_srs_cnt == 0); } /* * Remove the TX SRS. */ void mac_tx_srs_group_teardown(mac_client_impl_t *mcip, flow_entry_t *flent, uint32_t link_type) { mac_soft_ring_set_t *tx_srs; mac_srs_tx_t *tx; if ((tx_srs = flent->fe_tx_srs) == NULL) return; tx = &tx_srs->srs_tx; switch (link_type) { case SRST_FLOW: /* * For flows, we need to work with passed * flent to find the Rx/Tx SRS. */ mac_tx_srs_quiesce(tx_srs, SRS_CONDEMNED); break; case SRST_LINK: mac_tx_client_condemn((mac_client_handle_t)mcip); if (tx->st_arg2 != NULL) { ASSERT(tx_srs->srs_type & SRST_TX); /* * The ring itself will be stopped when * we release the group or in the * mac_datapath_teardown (for the default * group) */ tx->st_arg2 = NULL; } break; default: ASSERT(B_FALSE); break; } mac_srs_free(tx_srs); flent->fe_tx_srs = NULL; } /* * This is the group state machine. * * The state of an Rx group is given by * the following table. The default group and its rings are started in * mac_start itself and the default group stays in SHARED state until * mac_stop at which time the group and rings are stopped and and it * reverts to the Registered state. * * Typically this function is called on a group after adding or removing a * client from it, to find out what should be the new state of the group. * If the new state is RESERVED, then the client that owns this group * exclusively is also returned. Note that adding or removing a client from * a group could also impact the default group and the caller needs to * evaluate the effect on the default group. * * Group type # of clients mi_nactiveclients Group State * in the group * * Non-default 0 N.A. REGISTERED * Non-default 1 N.A. RESERVED * * Default 0 N.A. SHARED * Default 1 1 RESERVED * Default 1 > 1 SHARED * Default > 1 N.A. SHARED * * For a TX group, the following is the state table. * * Group type # of clients Group State * in the group * * Non-default 0 REGISTERED * Non-default 1 RESERVED * * Default 0 REGISTERED * Default 1 RESERVED * Default > 1 SHARED */ mac_group_state_t mac_group_next_state(mac_group_t *grp, mac_client_impl_t **group_only_mcip, mac_group_t *defgrp, boolean_t rx_group) { mac_impl_t *mip = (mac_impl_t *)grp->mrg_mh; *group_only_mcip = NULL; /* Non-default group */ if (grp != defgrp) { if (MAC_GROUP_NO_CLIENT(grp)) return (MAC_GROUP_STATE_REGISTERED); *group_only_mcip = MAC_GROUP_ONLY_CLIENT(grp); if (*group_only_mcip != NULL) return (MAC_GROUP_STATE_RESERVED); return (MAC_GROUP_STATE_SHARED); } /* Default group */ if (MAC_GROUP_NO_CLIENT(grp)) { if (rx_group) return (MAC_GROUP_STATE_SHARED); else return (MAC_GROUP_STATE_REGISTERED); } *group_only_mcip = MAC_GROUP_ONLY_CLIENT(grp); if (*group_only_mcip == NULL) return (MAC_GROUP_STATE_SHARED); if (rx_group && mip->mi_nactiveclients != 1) return (MAC_GROUP_STATE_SHARED); ASSERT(*group_only_mcip != NULL); return (MAC_GROUP_STATE_RESERVED); } /* * OVERVIEW NOTES FOR DATAPATH * =========================== * * Create an SRS and setup the corresponding flow function and args. * Add a classification rule for the flow specified by 'flent' and program * the hardware classifier when applicable. * * Rx ring assignment, SRS, polling and B/W enforcement * ---------------------------------------------------- * * We try to use H/W classification on NIC and assign traffic to a * MAC address to a particular Rx ring. There is a 1-1 mapping * between a SRS and a Rx ring. The SRS (short for soft ring set) * dynamically switches the underlying Rx ring between interrupt * and polling mode and enforces any specified B/W control. * * There is always a SRS created and tied to each H/W and S/W rule. * Whenever we create a H/W rule, we always add the the same rule to * S/W classifier and tie a SRS to it. * * In case a B/W control is specified, its broken into bytes * per ticks and as soon as the quota for a tick is exhausted, * the underlying Rx ring is forced into poll mode for remianing * tick. The SRS poll thread only polls for bytes that are * allowed to come in the SRS. We typically let 4x the configured * B/W worth of packets to come in the SRS (to prevent unnecessary * drops due to bursts) but only process the specified amount. * * A Link (primary NIC, VNIC, VLAN or aggr) can have 1 or more * Rx rings (and corresponding SRSs) assigned to it. The SRS * in turn can have softrings to do protocol level fanout or * softrings to do S/W based fanout or both. In case the NIC * has no Rx rings, we do S/W classification to respective SRS. * The S/W classification rule is always setup and ready. This * allows the MAC layer to reassign Rx rings whenever needed * but packets still continue to flow via the default path and * getting S/W classified to correct SRS. * * In other cases where a NIC or VNIC is plumbed, our goal is use * H/W classifier and get two Rx ring assigned for the Link. One * for TCP and one for UDP|SCTP. The respective SRS still do the * polling on the Rx ring. For Link that is plumbed for IP, there * is a TCP squeue which also does polling and can control the * the Rx ring directly (where SRS is just pass through). For * the following cases, the SRS does the polling underneath. * 1) non IP based Links (Links which are not plumbed via ifconfig) * and paths which have no IP squeues (UDP & SCTP) * 2) If B/W control is specified on the Link * 3) If S/W fanout is secified * * Note1: As of current implementation, we try to assign only 1 Rx * ring per Link and more than 1 Rx ring for primary Link for * H/W based fanout. We always create following softrings per SRS: * 1) TCP softring which is polled by TCP squeue where possible * (and also bypasses DLS) * 2) UDP/SCTP based which bypasses DLS * 3) OTH softring which goes via DLS (currently deal with IPv6 * and non TCP/UDP/SCTP for IPv4 packets). * * It is necessary to create 3 softrings since SRS has to poll * the single Rx ring underneath and enforce any link level B/W * control (we can't switch the Rx ring in poll mode just based * on TCP squeue if the same Rx ring is sharing UDP and other * traffic as well). Once polling is done and any Link level B/W * control is specified, the packets are assigned to respective * softring based on protocol. Since TCP has IP based squeue * which benefits by polling, we separate TCP packets into * its own softring which can be polled by IP squeue. We need * to separate out UDP/SCTP to UDP softring since it can bypass * the DLS layer which has heavy performance advanatges and we * need a softring (OTH) for rest. * * ToDo: The 3 softrings for protocol are needed only till we can * get rid of DLS from datapath, make IPv4 and IPv6 paths * symmetric (deal with mac_header_info for v6 and polling for * IPv4 TCP - ip_accept_tcp is IPv4 specific although squeues * are generic), and bring SAP based classification to MAC layer * * H/W and S/W based fanout and multiple Rx rings per Link * ------------------------------------------------------- * * In case, fanout is requested (or determined automatically based * on Link speed and processor speed), we try to assign multiple * Rx rings per Link with their respective SRS. In this case * the NIC should be capable of fanning out incoming packets between * the assigned Rx rings (H/W based fanout). All the SRS * individually switch their Rx ring between interrupt and polling * mode but share a common B/W control counter in case of Link * level B/W is specified. * * If S/W based fanout is specified in lieu of H/W based fanout, * the Link SRS creates the specified number of softrings for * each protocol (TCP, UDP, OTH). Incoming packets are fanned * out to the correct softring based on their protocol and * protocol specific hash function. * * Primary and non primary MAC clients * ----------------------------------- * * The NICs, VNICs, Vlans, and Aggrs are typically termed as Links * and are a Layer 2 construct. * * Primary NIC: * The Link that owns the primary MAC address and typically * is used as the data NIC in non virtualized cases. As such * H/W resources are preferntially given to primary NIC. As * far as code is concerned, there is no difference in the * primary NIC vs VNICs. They are all treated as Links. * At the very first call to mac_unicast_add() we program the S/W * classifier for the primary MAC address, get a soft ring set * (and soft rings based on 'ip_soft_ring_cnt') * and a Rx ring assigned for polling to get enabled. * When IP get plumbed and negotiates polling, we can * let squeue do the polling on TCP softring. * * VNICs: * Same as any other Link. As long as the H/W resource assignments * are equal, the data path and setup for all Links is same. * * Flows: * Can be configured on Links. They have their own SRS and the * S/W classifier is programmed appropriately based on the flow. * The flows typically deal with layer 3 and above and * creates a soft ring set specific to the flow. The receive * side function is switched from mac_rx_srs_process to * mac_rx_srs_subflow_process which first tries to assign the * packet to appropriate flow SRS and failing which assigns it * to link SRS. This allows us to avoid the layered approach * which gets complex. * * By the time mac_datapath_setup() completes, we already have the * soft rings set, Rx rings, soft rings, etc figured out and both H/W * and S/W classifiers programmed. IP is not plumbed yet (and might * never be for Virtual Machines guest OS path). When IP is plumbed * (for both NIC and VNIC), we do a capability negotiation for polling * and upcall functions etc. * * Rx ring Assignement NOTES * ------------------------- * * For NICs which have only 1 Rx ring (we treat NICs with no Rx rings * as NIC with a single default ring), we assign the only ring to * primary Link. The primary Link SRS can do polling on it as long as * it is the only link in use and we compare the MAC address for unicast * packets before accepting an incoming packet (there is no need for S/W * classification in this case). We disable polling on the only ring the * moment 2nd link gets created (the polling remains enabled even though * there are broadcast and * multicast flows created). * * If the NIC has more than 1 Rx ring, we assign the default ring (the * 1st ring) to deal with broadcast, multicast and traffic for other * NICs which needs S/W classification. We assign the primary mac * addresses to another ring by specifiying a classification rule for * primary unicast MAC address to the selected ring. The primary Link * (and its SRS) can continue to poll the assigned Rx ring at all times * independantly. * * Note: In future, if no fanout is specified, we try to assign 2 Rx * rings for the primary Link with the primary MAC address + TCP going * to one ring and primary MAC address + UDP|SCTP going to other ring. * Any remaining traffic for primary MAC address can go to the default * Rx ring and get S/W classified. This way the respective SRSs don't * need to do proto fanout and don't need to have softrings at all and * can poll their respective Rx rings. * * As an optimization, when a new NIC or VNIC is created, we can get * only one Rx ring and make it a TCP specific Rx ring and use the * H/W default Rx ring for the rest (this Rx ring is never polled). * * For clients that don't have MAC address, but want to receive and * transmit packets (e.g, bpf, gvrp etc.), we need to setup the datapath. * For such clients (identified by the MCIS_NO_UNICAST_ADDR flag) we * always give the default group and use software classification (i.e. * even if this is the only client in the default group, we will * leave group as shared). */ int mac_datapath_setup(mac_client_impl_t *mcip, flow_entry_t *flent, uint32_t link_type) { mac_impl_t *mip = mcip->mci_mip; mac_group_t *rgroup = NULL; mac_group_t *tgroup = NULL; mac_group_t *default_rgroup; mac_group_t *default_tgroup; int err; uint8_t *mac_addr; mac_group_state_t next_state; mac_client_impl_t *group_only_mcip; mac_resource_props_t *mrp = MCIP_RESOURCE_PROPS(mcip); mac_resource_props_t *emrp = MCIP_EFFECTIVE_PROPS(mcip); boolean_t rxhw; boolean_t txhw; boolean_t use_default = B_FALSE; cpupart_t *cpupart; boolean_t no_unicast; boolean_t isprimary = flent->fe_type & FLOW_PRIMARY_MAC; mac_client_impl_t *reloc_pmcip = NULL; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); switch (link_type) { case SRST_FLOW: mac_srs_group_setup(mcip, flent, link_type); return (0); case SRST_LINK: no_unicast = mcip->mci_state_flags & MCIS_NO_UNICAST_ADDR; mac_addr = flent->fe_flow_desc.fd_dst_mac; /* Default RX group */ default_rgroup = MAC_DEFAULT_RX_GROUP(mip); /* Default TX group */ default_tgroup = MAC_DEFAULT_TX_GROUP(mip); if (no_unicast) { rgroup = default_rgroup; tgroup = default_tgroup; goto grp_found; } rxhw = (mrp->mrp_mask & MRP_RX_RINGS) && (mrp->mrp_nrxrings > 0 || (mrp->mrp_mask & MRP_RXRINGS_UNSPEC)); txhw = (mrp->mrp_mask & MRP_TX_RINGS) && (mrp->mrp_ntxrings > 0 || (mrp->mrp_mask & MRP_TXRINGS_UNSPEC)); /* * By default we have given the primary all the rings * i.e. the default group. Let's see if the primary * needs to be relocated so that the addition of this * client doesn't impact the primary's performance, * i.e. if the primary is in the default group and * we add this client, the primary will lose polling. * We do this only for NICs supporting dynamic ring * grouping and only when this is the first client * after the primary (i.e. nactiveclients is 2) */ if (!isprimary && mip->mi_nactiveclients == 2 && (group_only_mcip = mac_primary_client_handle(mip)) != NULL && mip->mi_rx_group_type == MAC_GROUP_TYPE_DYNAMIC) { reloc_pmcip = mac_check_primary_relocation( group_only_mcip, rxhw); } /* * Check to see if we can get an exclusive group for * this mac address or if there already exists a * group that has this mac address (case of VLANs). * If no groups are available, use the default group. */ rgroup = mac_reserve_rx_group(mcip, mac_addr, B_FALSE); if (rgroup == NULL && rxhw) { err = ENOSPC; goto setup_failed; } else if (rgroup == NULL) { rgroup = default_rgroup; } /* * Check to see if we can get an exclusive group for * this mac client. If no groups are available, use * the default group. */ tgroup = mac_reserve_tx_group(mcip, B_FALSE); if (tgroup == NULL && txhw) { if (rgroup != NULL && rgroup != default_rgroup) mac_release_rx_group(mcip, rgroup); err = ENOSPC; goto setup_failed; } else if (tgroup == NULL) { tgroup = default_tgroup; } /* * Some NICs don't support any Rx rings, so there may not * even be a default group. */ grp_found: if (rgroup != NULL) { if (rgroup != default_rgroup && MAC_GROUP_NO_CLIENT(rgroup) && (rxhw || mcip->mci_share != NULL)) { MAC_RX_GRP_RESERVED(mip); if (mip->mi_rx_group_type == MAC_GROUP_TYPE_DYNAMIC) { MAC_RX_RING_RESERVED(mip, rgroup->mrg_cur_count); } } flent->fe_rx_ring_group = rgroup; /* * Add the client to the group. This could cause * either this group to move to the shared state or * cause the default group to move to the shared state. * The actions on this group are done here, while the * actions on the default group are postponed to * the end of this function. */ mac_group_add_client(rgroup, mcip); next_state = mac_group_next_state(rgroup, &group_only_mcip, default_rgroup, B_TRUE); mac_set_group_state(rgroup, next_state); } if (tgroup != NULL) { if (tgroup != default_tgroup && MAC_GROUP_NO_CLIENT(tgroup) && (txhw || mcip->mci_share != NULL)) { MAC_TX_GRP_RESERVED(mip); if (mip->mi_tx_group_type == MAC_GROUP_TYPE_DYNAMIC) { MAC_TX_RING_RESERVED(mip, tgroup->mrg_cur_count); } } flent->fe_tx_ring_group = tgroup; mac_group_add_client(tgroup, mcip); next_state = mac_group_next_state(tgroup, &group_only_mcip, default_tgroup, B_FALSE); tgroup->mrg_state = next_state; } /* * Setup the Rx and Tx SRSes. If we got a pristine group * exclusively above, mac_srs_group_setup would simply create * the required SRSes. If we ended up sharing a previously * reserved group, mac_srs_group_setup would also dismantle the * SRSes of the previously exclusive group */ mac_srs_group_setup(mcip, flent, link_type); /* We are setting up minimal datapath only */ if (no_unicast) break; /* Program the S/W Classifer */ if ((err = mac_flow_add(mip->mi_flow_tab, flent)) != 0) goto setup_failed; /* Program the H/W Classifier */ if ((err = mac_add_macaddr(mip, rgroup, mac_addr, (mcip->mci_state_flags & MCIS_UNICAST_HW) != 0)) != 0) goto setup_failed; mcip->mci_unicast = mac_find_macaddr(mip, mac_addr); ASSERT(mcip->mci_unicast != NULL); /* (Re)init the v6 token & local addr used by link protection */ mac_protect_update_mac_token(mcip); break; default: ASSERT(B_FALSE); break; } /* * All broadcast and multicast traffic is received only on the default * group. If we have setup the datapath for a non-default group above * then move the default group to shared state to allow distribution of * incoming broadcast traffic to the other groups and dismantle the * SRSes over the default group. */ if (rgroup != NULL) { if (rgroup != default_rgroup) { if (default_rgroup->mrg_state == MAC_GROUP_STATE_RESERVED) { group_only_mcip = MAC_GROUP_ONLY_CLIENT( default_rgroup); ASSERT(group_only_mcip != NULL && mip->mi_nactiveclients > 1); mac_set_group_state(default_rgroup, MAC_GROUP_STATE_SHARED); mac_rx_srs_group_setup(group_only_mcip, group_only_mcip->mci_flent, SRST_LINK); pool_lock(); cpupart = mac_pset_find(mrp, &use_default); mac_fanout_setup(group_only_mcip, group_only_mcip->mci_flent, MCIP_RESOURCE_PROPS(group_only_mcip), mac_rx_deliver, group_only_mcip, NULL, cpupart); mac_set_pool_effective(use_default, cpupart, mrp, emrp); pool_unlock(); } ASSERT(default_rgroup->mrg_state == MAC_GROUP_STATE_SHARED); } /* * If we get an exclusive group for a VLAN MAC client we * need to take the s/w path to make the additional check for * the vid. Disable polling and set it to s/w classification. * Similarly for clients that don't have a unicast address. */ if (rgroup->mrg_state == MAC_GROUP_STATE_RESERVED && (i_mac_flow_vid(flent) != VLAN_ID_NONE || no_unicast)) { mac_rx_switch_grp_to_sw(rgroup); } } mac_set_rings_effective(mcip); return (0); setup_failed: /* Switch the primary back to default group */ if (reloc_pmcip != NULL) { (void) mac_rx_switch_group(reloc_pmcip, reloc_pmcip->mci_flent->fe_rx_ring_group, default_rgroup); } mac_datapath_teardown(mcip, flent, link_type); return (err); } void mac_datapath_teardown(mac_client_impl_t *mcip, flow_entry_t *flent, uint32_t link_type) { mac_impl_t *mip = mcip->mci_mip; mac_group_t *group = NULL; mac_client_impl_t *grp_only_mcip; flow_entry_t *group_only_flent; mac_group_t *default_group; boolean_t check_default_group = B_FALSE; mac_group_state_t next_state; mac_resource_props_t *mrp = MCIP_RESOURCE_PROPS(mcip); ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); switch (link_type) { case SRST_FLOW: mac_rx_srs_group_teardown(flent, B_FALSE); mac_tx_srs_group_teardown(mcip, flent, SRST_FLOW); return; case SRST_LINK: /* Stop sending packets */ mac_tx_client_block(mcip); /* Stop the packets coming from the H/W */ if (mcip->mci_unicast != NULL) { int err; err = mac_remove_macaddr(mcip->mci_unicast); if (err != 0) { cmn_err(CE_WARN, "%s: failed to remove a MAC" " address because of error 0x%x", mip->mi_name, err); } mcip->mci_unicast = NULL; } /* Stop the packets coming from the S/W classifier */ mac_flow_remove(mip->mi_flow_tab, flent, B_FALSE); mac_flow_wait(flent, FLOW_DRIVER_UPCALL); /* Now quiesce and destroy all SRS and soft rings */ mac_rx_srs_group_teardown(flent, B_FALSE); mac_tx_srs_group_teardown(mcip, flent, SRST_LINK); ASSERT((mcip->mci_flent == flent) && (flent->fe_next == NULL)); /* * Release our hold on the group as well. We need * to check if the shared group has only one client * left who can use it exclusively. Also, if we * were the last client, release the group. */ group = flent->fe_rx_ring_group; default_group = MAC_DEFAULT_RX_GROUP(mip); if (group != NULL) { mac_group_remove_client(group, mcip); next_state = mac_group_next_state(group, &grp_only_mcip, default_group, B_TRUE); if (next_state == MAC_GROUP_STATE_RESERVED) { /* * Only one client left on this RX group. */ ASSERT(grp_only_mcip != NULL); mac_set_group_state(group, MAC_GROUP_STATE_RESERVED); group_only_flent = grp_only_mcip->mci_flent; /* * The only remaining client has exclusive * access on the group. Allow it to * dynamically poll the H/W rings etc. */ mac_rx_srs_group_setup(grp_only_mcip, group_only_flent, SRST_LINK); mac_fanout_setup(grp_only_mcip, group_only_flent, MCIP_RESOURCE_PROPS(grp_only_mcip), mac_rx_deliver, grp_only_mcip, NULL, NULL); mac_rx_group_unmark(group, MR_INCIPIENT); mac_set_rings_effective(grp_only_mcip); } else if (next_state == MAC_GROUP_STATE_REGISTERED) { /* * This is a non-default group being freed up. * We need to reevaluate the default group * to see if the primary client can get * exclusive access to the default group. */ ASSERT(group != MAC_DEFAULT_RX_GROUP(mip)); if (mrp->mrp_mask & MRP_RX_RINGS) { MAC_RX_GRP_RELEASED(mip); if (mip->mi_rx_group_type == MAC_GROUP_TYPE_DYNAMIC) { MAC_RX_RING_RELEASED(mip, group->mrg_cur_count); } } mac_release_rx_group(mcip, group); mac_set_group_state(group, MAC_GROUP_STATE_REGISTERED); check_default_group = B_TRUE; } else { ASSERT(next_state == MAC_GROUP_STATE_SHARED); mac_set_group_state(group, MAC_GROUP_STATE_SHARED); mac_rx_group_unmark(group, MR_CONDEMNED); } flent->fe_rx_ring_group = NULL; } /* * Remove the client from the TX group. Additionally, if * this a non-default group, then we also need to release * the group. */ group = flent->fe_tx_ring_group; default_group = MAC_DEFAULT_TX_GROUP(mip); if (group != NULL) { mac_group_remove_client(group, mcip); next_state = mac_group_next_state(group, &grp_only_mcip, default_group, B_FALSE); if (next_state == MAC_GROUP_STATE_REGISTERED) { if (group != default_group) { if (mrp->mrp_mask & MRP_TX_RINGS) { MAC_TX_GRP_RELEASED(mip); if (mip->mi_tx_group_type == MAC_GROUP_TYPE_DYNAMIC) { MAC_TX_RING_RELEASED( mip, group-> mrg_cur_count); } } mac_release_tx_group(mcip, group); /* * If the default group is reserved, * then we need to set the effective * rings as we would have given * back some rings when the group * was released */ if (mip->mi_tx_group_type == MAC_GROUP_TYPE_DYNAMIC && default_group->mrg_state == MAC_GROUP_STATE_RESERVED) { grp_only_mcip = MAC_GROUP_ONLY_CLIENT (default_group); mac_set_rings_effective( grp_only_mcip); } } else { mac_ring_t *ring; int cnt; int ringcnt; /* * Stop all the rings except the * default ring. */ ringcnt = group->mrg_cur_count; ring = group->mrg_rings; for (cnt = 0; cnt < ringcnt; cnt++) { if (ring->mr_state == MR_INUSE && ring != (mac_ring_t *) mip->mi_default_tx_ring) { mac_stop_ring(ring); ring->mr_flag = 0; } ring = ring->mr_next; } } } else if (next_state == MAC_GROUP_STATE_RESERVED) { mac_set_rings_effective(grp_only_mcip); } flent->fe_tx_ring_group = NULL; group->mrg_state = next_state; } break; default: ASSERT(B_FALSE); break; } /* * The mac client using the default group gets exclusive access to the * default group if and only if it is the sole client on the entire * mip. If so set the group state to reserved, and set up the SRSes * over the default group. */ if (check_default_group) { default_group = MAC_DEFAULT_RX_GROUP(mip); ASSERT(default_group->mrg_state == MAC_GROUP_STATE_SHARED); next_state = mac_group_next_state(default_group, &grp_only_mcip, default_group, B_TRUE); if (next_state == MAC_GROUP_STATE_RESERVED) { ASSERT(grp_only_mcip != NULL && mip->mi_nactiveclients == 1); mac_set_group_state(default_group, MAC_GROUP_STATE_RESERVED); mac_rx_srs_group_setup(grp_only_mcip, grp_only_mcip->mci_flent, SRST_LINK); mac_fanout_setup(grp_only_mcip, grp_only_mcip->mci_flent, MCIP_RESOURCE_PROPS(grp_only_mcip), mac_rx_deliver, grp_only_mcip, NULL, NULL); mac_rx_group_unmark(default_group, MR_INCIPIENT); mac_set_rings_effective(grp_only_mcip); } } /* * If the primary is the only one left and the MAC supports * dynamic grouping, we need to see if the primary needs to * be moved to the default group so that it can use all the * H/W rings. */ if (!(flent->fe_type & FLOW_PRIMARY_MAC) && mip->mi_nactiveclients == 1 && mip->mi_rx_group_type == MAC_GROUP_TYPE_DYNAMIC) { default_group = MAC_DEFAULT_RX_GROUP(mip); grp_only_mcip = mac_primary_client_handle(mip); if (grp_only_mcip == NULL) return; group_only_flent = grp_only_mcip->mci_flent; mrp = MCIP_RESOURCE_PROPS(grp_only_mcip); /* * If the primary has an explicit property set, leave it * alone. */ if (mrp->mrp_mask & MRP_RX_RINGS) return; /* * Switch the primary to the default group. */ (void) mac_rx_switch_group(grp_only_mcip, group_only_flent->fe_rx_ring_group, default_group); } } /* DATAPATH TEAR DOWN ROUTINES (SRS and FANOUT teardown) */ static void mac_srs_fanout_list_free(mac_soft_ring_set_t *mac_srs) { if (mac_srs->srs_type & SRST_TX) { mac_srs_tx_t *tx; ASSERT(mac_srs->srs_tcp_soft_rings == NULL); ASSERT(mac_srs->srs_udp_soft_rings == NULL); ASSERT(mac_srs->srs_oth_soft_rings == NULL); ASSERT(mac_srs->srs_tx_soft_rings != NULL); kmem_free(mac_srs->srs_tx_soft_rings, sizeof (mac_soft_ring_t *) * MAX_RINGS_PER_GROUP); mac_srs->srs_tx_soft_rings = NULL; tx = &mac_srs->srs_tx; if (tx->st_soft_rings != NULL) { kmem_free(tx->st_soft_rings, sizeof (mac_soft_ring_t *) * MAX_RINGS_PER_GROUP); } } else { ASSERT(mac_srs->srs_tx_soft_rings == NULL); ASSERT(mac_srs->srs_tcp_soft_rings != NULL); kmem_free(mac_srs->srs_tcp_soft_rings, sizeof (mac_soft_ring_t *) * MAX_SR_FANOUT); mac_srs->srs_tcp_soft_rings = NULL; ASSERT(mac_srs->srs_udp_soft_rings != NULL); kmem_free(mac_srs->srs_udp_soft_rings, sizeof (mac_soft_ring_t *) * MAX_SR_FANOUT); mac_srs->srs_udp_soft_rings = NULL; ASSERT(mac_srs->srs_oth_soft_rings != NULL); kmem_free(mac_srs->srs_oth_soft_rings, sizeof (mac_soft_ring_t *) * MAX_SR_FANOUT); mac_srs->srs_oth_soft_rings = NULL; } } /* * An RX SRS is attached to at most one mac_ring. * A TX SRS has no rings. */ static void mac_srs_ring_free(mac_soft_ring_set_t *mac_srs) { mac_client_impl_t *mcip; mac_ring_t *ring; flow_entry_t *flent; ring = mac_srs->srs_ring; if (mac_srs->srs_type & SRST_TX) { ASSERT(ring == NULL); return; } if (ring == NULL) return; /* * Broadcast flows don't have a client impl association, but they * use only soft rings. */ flent = mac_srs->srs_flent; mcip = flent->fe_mcip; ASSERT(mcip != NULL); ring->mr_classify_type = MAC_NO_CLASSIFIER; ring->mr_srs = NULL; } /* * Physical unlink and free of the data structures happen below. This is * driven from mac_flow_destroy(), on the last refrele of a flow. * * Assumes Rx srs is 1-1 mapped with an ring. */ void mac_srs_free(mac_soft_ring_set_t *mac_srs) { ASSERT(mac_srs->srs_mcip == NULL || MAC_PERIM_HELD((mac_handle_t)mac_srs->srs_mcip->mci_mip)); ASSERT((mac_srs->srs_state & (SRS_CONDEMNED | SRS_CONDEMNED_DONE | SRS_PROC | SRS_PROC_FAST)) == (SRS_CONDEMNED | SRS_CONDEMNED_DONE)); mac_pkt_drop(NULL, NULL, mac_srs->srs_first, B_FALSE); mac_srs_ring_free(mac_srs); mac_srs_soft_rings_free(mac_srs); mac_srs_fanout_list_free(mac_srs); mac_srs->srs_bw = NULL; mac_srs_stat_delete(mac_srs); kmem_cache_free(mac_srs_cache, mac_srs); } static void mac_srs_soft_rings_quiesce(mac_soft_ring_set_t *mac_srs, uint_t s_ring_flag) { mac_soft_ring_t *softring; ASSERT(MUTEX_HELD(&mac_srs->srs_lock)); mac_srs_soft_rings_signal(mac_srs, s_ring_flag); if (s_ring_flag == S_RING_CONDEMNED) { while (mac_srs->srs_soft_ring_condemned_count != mac_srs->srs_soft_ring_count) cv_wait(&mac_srs->srs_async, &mac_srs->srs_lock); } else { while (mac_srs->srs_soft_ring_quiesced_count != mac_srs->srs_soft_ring_count) cv_wait(&mac_srs->srs_async, &mac_srs->srs_lock); } mutex_exit(&mac_srs->srs_lock); for (softring = mac_srs->srs_soft_ring_head; softring != NULL; softring = softring->s_ring_next) { (void) untimeout(softring->s_ring_tid); softring->s_ring_tid = NULL; } (void) untimeout(mac_srs->srs_tid); mac_srs->srs_tid = NULL; mutex_enter(&mac_srs->srs_lock); } /* * The block comment above mac_rx_classify_flow_state_change explains the * background. At this point upcalls from the driver (both hardware classified * and software classified) have been cut off. We now need to quiesce the * SRS worker, poll, and softring threads. The SRS worker thread serves as * the master controller. The steps involved are described below in the function */ void mac_srs_worker_quiesce(mac_soft_ring_set_t *mac_srs) { uint_t s_ring_flag; uint_t srs_poll_wait_flag; ASSERT(MUTEX_HELD(&mac_srs->srs_lock)); ASSERT(mac_srs->srs_state & (SRS_CONDEMNED | SRS_QUIESCE)); if (mac_srs->srs_state & SRS_CONDEMNED) { s_ring_flag = S_RING_CONDEMNED; srs_poll_wait_flag = SRS_POLL_THR_EXITED; } else { s_ring_flag = S_RING_QUIESCE; srs_poll_wait_flag = SRS_POLL_THR_QUIESCED; } /* * In the case of Rx SRS wait till the poll thread is done. */ if ((mac_srs->srs_type & SRST_TX) == 0 && mac_srs->srs_poll_thr != NULL) { while (!(mac_srs->srs_state & srs_poll_wait_flag)) cv_wait(&mac_srs->srs_async, &mac_srs->srs_lock); /* * Turn off polling as part of the quiesce operation. */ MAC_SRS_POLLING_OFF(mac_srs); mac_srs->srs_state &= ~(SRS_POLLING | SRS_GET_PKTS); } /* * Then signal the soft ring worker threads to quiesce or quit * as needed and then wait till that happens. */ mac_srs_soft_rings_quiesce(mac_srs, s_ring_flag); if (mac_srs->srs_state & SRS_CONDEMNED) mac_srs->srs_state |= (SRS_QUIESCE_DONE | SRS_CONDEMNED_DONE); else mac_srs->srs_state |= SRS_QUIESCE_DONE; cv_signal(&mac_srs->srs_quiesce_done_cv); } /* * Signal an SRS to start a temporary quiesce, or permanent removal, or restart * a quiesced SRS by setting the appropriate flags and signaling the SRS worker * or poll thread. This function is internal to the quiescing logic and is * called internally from the SRS quiesce or flow quiesce or client quiesce * higher level functions. */ void mac_srs_signal(mac_soft_ring_set_t *mac_srs, uint_t srs_flag) { mac_ring_t *ring; ring = mac_srs->srs_ring; ASSERT(ring == NULL || ring->mr_refcnt == 0); if (srs_flag == SRS_CONDEMNED) { /* * The SRS is going away. We need to unbind the SRS and SR * threads before removing from the global SRS list. Otherwise * there is a small window where the cpu reconfig callbacks * may miss the SRS in the list walk and DR could fail since * there are still bound threads. */ mac_srs_threads_unbind(mac_srs); mac_srs_remove_glist(mac_srs); } /* * Wakeup the SRS worker and poll threads. */ mutex_enter(&mac_srs->srs_lock); mac_srs->srs_state |= srs_flag; cv_signal(&mac_srs->srs_async); cv_signal(&mac_srs->srs_cv); mutex_exit(&mac_srs->srs_lock); } /* * In the Rx side, the quiescing is done bottom up. After the Rx upcalls * from the driver are done, then the Rx SRS is quiesced and only then can * we signal the soft rings. Thus this function can't be called arbitrarily * without satisfying the prerequisites. On the Tx side, the threads from * top need to quiesced, then the Tx SRS and only then can we signal the * Tx soft rings. */ static void mac_srs_soft_rings_signal(mac_soft_ring_set_t *mac_srs, uint_t sr_flag) { mac_soft_ring_t *softring; for (softring = mac_srs->srs_soft_ring_head; softring != NULL; softring = softring->s_ring_next) mac_soft_ring_signal(softring, sr_flag); } /* * The block comment above mac_rx_classify_flow_state_change explains the * background. At this point the SRS is quiesced and we need to restart the * SRS worker, poll, and softring threads. The SRS worker thread serves as * the master controller. The steps involved are described below in the function */ void mac_srs_worker_restart(mac_soft_ring_set_t *mac_srs) { boolean_t iam_rx_srs; mac_soft_ring_t *softring; ASSERT(MUTEX_HELD(&mac_srs->srs_lock)); if ((mac_srs->srs_type & SRST_TX) != 0) { iam_rx_srs = B_FALSE; ASSERT((mac_srs->srs_state & (SRS_POLL_THR_QUIESCED | SRS_QUIESCE_DONE | SRS_QUIESCE)) == (SRS_QUIESCE_DONE | SRS_QUIESCE)); } else { iam_rx_srs = B_TRUE; ASSERT((mac_srs->srs_state & (SRS_QUIESCE_DONE | SRS_QUIESCE)) == (SRS_QUIESCE_DONE | SRS_QUIESCE)); if (mac_srs->srs_poll_thr != NULL) { ASSERT((mac_srs->srs_state & SRS_POLL_THR_QUIESCED) == SRS_POLL_THR_QUIESCED); } } /* * Signal any quiesced soft ring workers to restart and wait for the * soft ring down count to come down to zero. */ if (mac_srs->srs_soft_ring_quiesced_count != 0) { for (softring = mac_srs->srs_soft_ring_head; softring != NULL; softring = softring->s_ring_next) { if (!(softring->s_ring_state & S_RING_QUIESCE)) continue; mac_soft_ring_signal(softring, S_RING_RESTART); } while (mac_srs->srs_soft_ring_quiesced_count != 0) cv_wait(&mac_srs->srs_async, &mac_srs->srs_lock); } mac_srs->srs_state &= ~(SRS_QUIESCE_DONE | SRS_QUIESCE | SRS_RESTART); if (iam_rx_srs && mac_srs->srs_poll_thr != NULL) { /* * Signal the poll thread and ask it to restart. Wait till it * actually restarts and the SRS_POLL_THR_QUIESCED flag gets * cleared. */ mac_srs->srs_state |= SRS_POLL_THR_RESTART; cv_signal(&mac_srs->srs_cv); while (mac_srs->srs_state & SRS_POLL_THR_QUIESCED) cv_wait(&mac_srs->srs_async, &mac_srs->srs_lock); ASSERT(!(mac_srs->srs_state & SRS_POLL_THR_RESTART)); } /* Wake up any waiter waiting for the restart to complete */ mac_srs->srs_state |= SRS_RESTART_DONE; cv_signal(&mac_srs->srs_quiesce_done_cv); } static void mac_srs_worker_unbind(mac_soft_ring_set_t *mac_srs) { mutex_enter(&mac_srs->srs_lock); if (!(mac_srs->srs_state & SRS_WORKER_BOUND)) { ASSERT(mac_srs->srs_worker_cpuid == -1); mutex_exit(&mac_srs->srs_lock); return; } mac_srs->srs_worker_cpuid = -1; mac_srs->srs_state &= ~SRS_WORKER_BOUND; thread_affinity_clear(mac_srs->srs_worker); mutex_exit(&mac_srs->srs_lock); } static void mac_srs_poll_unbind(mac_soft_ring_set_t *mac_srs) { mutex_enter(&mac_srs->srs_lock); if (mac_srs->srs_poll_thr == NULL || (mac_srs->srs_state & SRS_POLL_BOUND) == 0) { ASSERT(mac_srs->srs_poll_cpuid == -1); mutex_exit(&mac_srs->srs_lock); return; } mac_srs->srs_poll_cpuid = -1; mac_srs->srs_state &= ~SRS_POLL_BOUND; thread_affinity_clear(mac_srs->srs_poll_thr); mutex_exit(&mac_srs->srs_lock); } static void mac_srs_threads_unbind(mac_soft_ring_set_t *mac_srs) { mac_soft_ring_t *soft_ring; ASSERT(MAC_PERIM_HELD((mac_handle_t)mac_srs->srs_mcip->mci_mip)); mutex_enter(&cpu_lock); mac_srs_worker_unbind(mac_srs); if (!(mac_srs->srs_type & SRST_TX)) mac_srs_poll_unbind(mac_srs); for (soft_ring = mac_srs->srs_soft_ring_head; soft_ring != NULL; soft_ring = soft_ring->s_ring_next) { mac_soft_ring_unbind(soft_ring); } mutex_exit(&cpu_lock); } /* * When a CPU is going away, unbind all MAC threads which are bound * to that CPU. The affinity of the thread to the CPU is saved to allow * the thread to be rebound to the CPU if it comes back online. */ static void mac_walk_srs_and_unbind(int cpuid) { mac_soft_ring_set_t *mac_srs; mac_soft_ring_t *soft_ring; rw_enter(&mac_srs_g_lock, RW_READER); if ((mac_srs = mac_srs_g_list) == NULL) goto done; for (; mac_srs != NULL; mac_srs = mac_srs->srs_next) { if (mac_srs->srs_worker_cpuid == cpuid) { mac_srs->srs_worker_cpuid_save = cpuid; mac_srs_worker_unbind(mac_srs); } if (!(mac_srs->srs_type & SRST_TX)) { if (mac_srs->srs_poll_cpuid == cpuid) { mac_srs->srs_poll_cpuid_save = cpuid; mac_srs_poll_unbind(mac_srs); } } /* Next tackle the soft rings associated with the srs */ mutex_enter(&mac_srs->srs_lock); for (soft_ring = mac_srs->srs_soft_ring_head; soft_ring != NULL; soft_ring = soft_ring->s_ring_next) { if (soft_ring->s_ring_cpuid == cpuid) { soft_ring->s_ring_cpuid_save = cpuid; mac_soft_ring_unbind(soft_ring); } } mutex_exit(&mac_srs->srs_lock); } done: rw_exit(&mac_srs_g_lock); } /* TX SETUP and TEARDOWN ROUTINES */ /* * XXXHIO need to make sure the two mac_tx_srs_{add,del}_ring() * handle the case where the number of rings is one. I.e. there is * a ring pointed to by mac_srs->srs_tx_arg2. */ void mac_tx_srs_add_ring(mac_soft_ring_set_t *mac_srs, mac_ring_t *tx_ring) { mac_client_impl_t *mcip = mac_srs->srs_mcip; mac_soft_ring_t *soft_ring; int count = mac_srs->srs_tx_ring_count; uint32_t soft_ring_type = ST_RING_TX; uint_t ring_info; ASSERT(mac_srs->srs_state & SRS_QUIESCE); ring_info = mac_hwring_getinfo((mac_ring_handle_t)tx_ring); if (mac_tx_serialize || (ring_info & MAC_RING_TX_SERIALIZE)) soft_ring_type |= ST_RING_WORKER_ONLY; soft_ring = mac_soft_ring_create(count, 0, soft_ring_type, maxclsyspri, mcip, mac_srs, -1, NULL, mcip, (mac_resource_handle_t)tx_ring); mac_srs->srs_tx_ring_count++; mac_srs_update_fanout_list(mac_srs); /* * put this soft ring in quiesce mode too so when we restart * all soft rings in the srs are in the same state. */ mac_soft_ring_signal(soft_ring, S_RING_QUIESCE); } static void mac_soft_ring_remove(mac_soft_ring_set_t *mac_srs, mac_soft_ring_t *softring) { int sringcnt; mutex_enter(&mac_srs->srs_lock); sringcnt = mac_srs->srs_soft_ring_count; ASSERT(sringcnt > 0); mac_soft_ring_signal(softring, S_RING_CONDEMNED); ASSERT(mac_srs->srs_soft_ring_condemned_count == 0); while (mac_srs->srs_soft_ring_condemned_count != 1) cv_wait(&mac_srs->srs_async, &mac_srs->srs_lock); if (softring == mac_srs->srs_soft_ring_head) { mac_srs->srs_soft_ring_head = softring->s_ring_next; if (mac_srs->srs_soft_ring_head != NULL) { mac_srs->srs_soft_ring_head->s_ring_prev = NULL; } else { mac_srs->srs_soft_ring_tail = NULL; } } else { softring->s_ring_prev->s_ring_next = softring->s_ring_next; if (softring->s_ring_next != NULL) { softring->s_ring_next->s_ring_prev = softring->s_ring_prev; } else { mac_srs->srs_soft_ring_tail = softring->s_ring_prev; } } mac_srs->srs_soft_ring_count--; mac_srs->srs_soft_ring_condemned_count--; mutex_exit(&mac_srs->srs_lock); mac_soft_ring_free(softring); } void mac_tx_srs_del_ring(mac_soft_ring_set_t *mac_srs, mac_ring_t *tx_ring) { int i; mac_soft_ring_t *soft_ring, *remove_sring; mac_client_impl_t *mcip = mac_srs->srs_mcip; mutex_enter(&mac_srs->srs_lock); for (i = 0; i < mac_srs->srs_tx_ring_count; i++) { soft_ring = mac_srs->srs_tx_soft_rings[i]; if (soft_ring->s_ring_tx_arg2 == tx_ring) break; } mutex_exit(&mac_srs->srs_lock); ASSERT(i < mac_srs->srs_tx_ring_count); remove_sring = soft_ring; /* * In the case of aggr, the soft ring associated with a Tx ring * is also stored in st_soft_rings[] array. That entry should * be removed. */ if (mcip->mci_state_flags & MCIS_IS_AGGR) { mac_srs_tx_t *tx = &mac_srs->srs_tx; ASSERT(tx->st_soft_rings[tx_ring->mr_index] == remove_sring); tx->st_soft_rings[tx_ring->mr_index] = NULL; } mac_soft_ring_remove(mac_srs, remove_sring); mac_srs_update_fanout_list(mac_srs); } /* * mac_tx_srs_setup(): * Used to setup Tx rings. If no free Tx ring is available, then default * Tx ring is used. */ void mac_tx_srs_setup(mac_client_impl_t *mcip, flow_entry_t *flent) { mac_impl_t *mip = mcip->mci_mip; mac_soft_ring_set_t *tx_srs = flent->fe_tx_srs; int i; int tx_ring_count = 0; uint32_t soft_ring_type; mac_group_t *grp = NULL; mac_ring_t *ring; mac_srs_tx_t *tx = &tx_srs->srs_tx; boolean_t is_aggr; uint_t ring_info = 0; is_aggr = (mcip->mci_state_flags & MCIS_IS_AGGR) != 0; grp = flent->fe_tx_ring_group; if (grp == NULL) { ring = (mac_ring_t *)mip->mi_default_tx_ring; goto no_group; } tx_ring_count = grp->mrg_cur_count; ring = grp->mrg_rings; /* * An attempt is made to reserve 'tx_ring_count' number * of Tx rings. If tx_ring_count is 0, default Tx ring * is used. If it is 1, an attempt is made to reserve one * Tx ring. In both the cases, the ring information is * stored in Tx SRS. If multiple Tx rings are specified, * then each Tx ring will have a Tx-side soft ring. All * these soft rings will be hang off Tx SRS. */ switch (grp->mrg_state) { case MAC_GROUP_STATE_SHARED: case MAC_GROUP_STATE_RESERVED: if (tx_ring_count <= 1 && !is_aggr) { no_group: if (ring != NULL && ring->mr_state != MR_INUSE) { (void) mac_start_ring(ring); ring_info = mac_hwring_getinfo( (mac_ring_handle_t)ring); } tx->st_arg2 = (void *)ring; mac_tx_srs_stat_recreate(tx_srs, B_FALSE); if (tx_srs->srs_type & SRST_BW_CONTROL) { tx->st_mode = SRS_TX_BW; } else if (mac_tx_serialize || (ring_info & MAC_RING_TX_SERIALIZE)) { tx->st_mode = SRS_TX_SERIALIZE; } else { tx->st_mode = SRS_TX_DEFAULT; } break; } soft_ring_type = ST_RING_TX; if (tx_srs->srs_type & SRST_BW_CONTROL) { tx->st_mode = is_aggr ? SRS_TX_BW_AGGR : SRS_TX_BW_FANOUT; } else { tx->st_mode = is_aggr ? SRS_TX_AGGR : SRS_TX_FANOUT; } for (i = 0; i < tx_ring_count; i++) { ASSERT(ring != NULL); switch (ring->mr_state) { case MR_INUSE: case MR_FREE: ASSERT(ring->mr_srs == NULL); if (ring->mr_state != MR_INUSE) (void) mac_start_ring(ring); ring_info = mac_hwring_getinfo( (mac_ring_handle_t)ring); if (mac_tx_serialize || (ring_info & MAC_RING_TX_SERIALIZE)) { soft_ring_type |= ST_RING_WORKER_ONLY; } (void) mac_soft_ring_create(i, 0, soft_ring_type, maxclsyspri, mcip, tx_srs, -1, NULL, mcip, (mac_resource_handle_t)ring); break; default: cmn_err(CE_PANIC, "srs_setup: mcip = %p " "trying to add UNKNOWN ring = %p\n", (void *)mcip, (void *)ring); break; } ring = ring->mr_next; } mac_srs_update_fanout_list(tx_srs); break; default: ASSERT(B_FALSE); break; } tx->st_func = mac_tx_get_func(tx->st_mode); if (is_aggr) { VERIFY(i_mac_capab_get((mac_handle_t)mip, MAC_CAPAB_AGGR, &tx->st_capab_aggr)); } DTRACE_PROBE3(tx__srs___setup__return, mac_soft_ring_set_t *, tx_srs, int, tx->st_mode, int, tx_srs->srs_tx_ring_count); } /* * Update the fanout of a client if its recorded link speed doesn't match * its current link speed. */ void mac_fanout_recompute_client(mac_client_impl_t *mcip, cpupart_t *cpupart) { uint64_t link_speed; mac_resource_props_t *mcip_mrp; flow_entry_t *flent = mcip->mci_flent; mac_soft_ring_set_t *rx_srs; mac_cpus_t *srs_cpu; int soft_ring_count, maxcpus; ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip)); link_speed = mac_client_stat_get(mcip->mci_flent->fe_mcip, MAC_STAT_IFSPEED); if ((link_speed != 0) && (link_speed != mcip->mci_flent->fe_nic_speed)) { mcip_mrp = MCIP_RESOURCE_PROPS(mcip); /* * Before calling mac_fanout_setup(), check to see if * the SRSes already have the right number of soft * rings. mac_fanout_setup() is a heavy duty operation * where new cpu bindings are done for SRS and soft * ring threads and interrupts re-targeted. */ maxcpus = (cpupart != NULL) ? cpupart->cp_ncpus : ncpus; soft_ring_count = mac_compute_soft_ring_count(flent, flent->fe_rx_srs_cnt - 1, maxcpus); /* * If soft_ring_count returned by * mac_compute_soft_ring_count() is 0, bump it * up by 1 because we always have atleast one * TCP, UDP, and OTH soft ring associated with * an SRS. */ soft_ring_count = (soft_ring_count == 0) ? 1 : soft_ring_count; rx_srs = flent->fe_rx_srs[0]; srs_cpu = &rx_srs->srs_cpu; if (soft_ring_count != srs_cpu->mc_rx_fanout_cnt) { mac_fanout_setup(mcip, flent, mcip_mrp, mac_rx_deliver, mcip, NULL, cpupart); } } } /* * Walk through the list of mac clients for the MAC. * For each active mac client, recompute the number of soft rings * associated with every client, only if current speed is different * from the speed that was previously used for soft ring computation. * If the cable is disconnected whlie the NIC is started, we would get * notification with speed set to 0. We do not recompute in that case. */ void mac_fanout_recompute(mac_impl_t *mip) { mac_client_impl_t *mcip; cpupart_t *cpupart; boolean_t use_default; mac_resource_props_t *mrp, *emrp; i_mac_perim_enter(mip); if ((mip->mi_state_flags & MIS_IS_VNIC) != 0 || mip->mi_linkstate != LINK_STATE_UP) { i_mac_perim_exit(mip); return; } for (mcip = mip->mi_clients_list; mcip != NULL; mcip = mcip->mci_client_next) { if ((mcip->mci_state_flags & MCIS_SHARE_BOUND) != 0 || !MCIP_DATAPATH_SETUP(mcip)) continue; mrp = MCIP_RESOURCE_PROPS(mcip); emrp = MCIP_EFFECTIVE_PROPS(mcip); use_default = B_FALSE; pool_lock(); cpupart = mac_pset_find(mrp, &use_default); mac_fanout_recompute_client(mcip, cpupart); mac_set_pool_effective(use_default, cpupart, mrp, emrp); pool_unlock(); } i_mac_perim_exit(mip); } /* * Given a MAC, change the polling state for all its MAC clients. 'enable' is * B_TRUE to enable polling or B_FALSE to disable. Polling is enabled by * default. */ void mac_poll_state_change(mac_handle_t mh, boolean_t enable) { mac_impl_t *mip = (mac_impl_t *)mh; mac_client_impl_t *mcip; i_mac_perim_enter(mip); if (enable) mip->mi_state_flags &= ~MIS_POLL_DISABLE; else mip->mi_state_flags |= MIS_POLL_DISABLE; for (mcip = mip->mi_clients_list; mcip != NULL; mcip = mcip->mci_client_next) mac_client_update_classifier(mcip, B_TRUE); i_mac_perim_exit(mip); }