/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright 2019 Joyent, Inc. * Copyright 2015 Garrett D'Amore */ /* * MAC Services Module * * The GLDv3 framework locking - The MAC layer * -------------------------------------------- * * The MAC layer is central to the GLD framework and can provide the locking * framework needed for itself and for the use of MAC clients. MAC end points * are fairly disjoint and don't share a lot of state. So a coarse grained * multi-threading scheme is to single thread all create/modify/delete or set * type of control operations on a per mac end point while allowing data threads * concurrently. * * Control operations (set) that modify a mac end point are always serialized on * a per mac end point basis, We have at most 1 such thread per mac end point * at a time. * * All other operations that are not serialized are essentially multi-threaded. * For example a control operation (get) like getting statistics which may not * care about reading values atomically or data threads sending or receiving * data. Mostly these type of operations don't modify the control state. Any * state these operations care about are protected using traditional locks. * * The perimeter only serializes serial operations. It does not imply there * aren't any other concurrent operations. However a serialized operation may * sometimes need to make sure it is the only thread. In this case it needs * to use reference counting mechanisms to cv_wait until any current data * threads are done. * * The mac layer itself does not hold any locks across a call to another layer. * The perimeter is however held across a down call to the driver to make the * whole control operation atomic with respect to other control operations. * Also the data path and get type control operations may proceed concurrently. * These operations synchronize with the single serial operation on a given mac * end point using regular locks. The perimeter ensures that conflicting * operations like say a mac_multicast_add and a mac_multicast_remove on the * same mac end point don't interfere with each other and also ensures that the * changes in the mac layer and the call to the underlying driver to say add a * multicast address are done atomically without interference from a thread * trying to delete the same address. * * For example, consider * mac_multicst_add() * { * mac_perimeter_enter(); serialize all control operations * * grab list lock protect against access by data threads * add to list * drop list lock * * call driver's mi_multicst * * mac_perimeter_exit(); * } * * To lessen the number of serialization locks and simplify the lock hierarchy, * we serialize all the control operations on a per mac end point by using a * single serialization lock called the perimeter. We allow recursive entry into * the perimeter to facilitate use of this mechanism by both the mac client and * the MAC layer itself. * * MAC client means an entity that does an operation on a mac handle * obtained from a mac_open/mac_client_open. Similarly MAC driver means * an entity that does an operation on a mac handle obtained from a * mac_register. An entity could be both client and driver but on different * handles eg. aggr. and should only make the corresponding mac interface calls * i.e. mac driver interface or mac client interface as appropriate for that * mac handle. * * General rules. * ------------- * * R1. The lock order of upcall threads is natually opposite to downcall * threads. Hence upcalls must not hold any locks across layers for fear of * recursive lock enter and lock order violation. This applies to all layers. * * R2. The perimeter is just another lock. Since it is held in the down * direction, acquiring the perimeter in an upcall is prohibited as it would * cause a deadlock. This applies to all layers. * * Note that upcalls that need to grab the mac perimeter (for example * mac_notify upcalls) can still achieve that by posting the request to a * thread, which can then grab all the required perimeters and locks in the * right global order. Note that in the above example the mac layer iself * won't grab the mac perimeter in the mac_notify upcall, instead the upcall * to the client must do that. Please see the aggr code for an example. * * MAC client rules * ---------------- * * R3. A MAC client may use the MAC provided perimeter facility to serialize * control operations on a per mac end point. It does this by by acquring * and holding the perimeter across a sequence of calls to the mac layer. * This ensures atomicity across the entire block of mac calls. In this * model the MAC client must not hold any client locks across the calls to * the mac layer. This model is the preferred solution. * * R4. However if a MAC client has a lot of global state across all mac end * points the per mac end point serialization may not be sufficient. In this * case the client may choose to use global locks or use its own serialization. * To avoid deadlocks, these client layer locks held across the mac calls * in the control path must never be acquired by the data path for the reason * mentioned below. * * (Assume that a control operation that holds a client lock blocks in the * mac layer waiting for upcall reference counts to drop to zero. If an upcall * data thread that holds this reference count, tries to acquire the same * client lock subsequently it will deadlock). * * A MAC client may follow either the R3 model or the R4 model, but can't * mix both. In the former, the hierarchy is Perim -> client locks, but in * the latter it is client locks -> Perim. * * R5. MAC clients must make MAC calls (excluding data calls) in a cv_wait'able * context since they may block while trying to acquire the perimeter. * In addition some calls may block waiting for upcall refcnts to come down to * zero. * * R6. MAC clients must make sure that they are single threaded and all threads * from the top (in particular data threads) have finished before calling * mac_client_close. The MAC framework does not track the number of client * threads using the mac client handle. Also mac clients must make sure * they have undone all the control operations before calling mac_client_close. * For example mac_unicast_remove/mac_multicast_remove to undo the corresponding * mac_unicast_add/mac_multicast_add. * * MAC framework rules * ------------------- * * R7. The mac layer itself must not hold any mac layer locks (except the mac * perimeter) across a call to any other layer from the mac layer. The call to * any other layer could be via mi_* entry points, classifier entry points into * the driver or via upcall pointers into layers above. The mac perimeter may * be acquired or held only in the down direction, for e.g. when calling into * a mi_* driver enty point to provide atomicity of the operation. * * R8. Since it is not guaranteed (see R14) that drivers won't hold locks across * mac driver interfaces, the MAC layer must provide a cut out for control * interfaces like upcall notifications and start them in a separate thread. * * R9. Note that locking order also implies a plumbing order. For example * VNICs are allowed to be created over aggrs, but not vice-versa. An attempt * to plumb in any other order must be failed at mac_open time, otherwise it * could lead to deadlocks due to inverse locking order. * * R10. MAC driver interfaces must not block since the driver could call them * in interrupt context. * * R11. Walkers must preferably not hold any locks while calling walker * callbacks. Instead these can operate on reference counts. In simple * callbacks it may be ok to hold a lock and call the callbacks, but this is * harder to maintain in the general case of arbitrary callbacks. * * R12. The MAC layer must protect upcall notification callbacks using reference * counts rather than holding locks across the callbacks. * * R13. Given the variety of drivers, it is preferable if the MAC layer can make * sure that any pointers (such as mac ring pointers) it passes to the driver * remain valid until mac unregister time. Currently the mac layer achieves * this by using generation numbers for rings and freeing the mac rings only * at unregister time. The MAC layer must provide a layer of indirection and * must not expose underlying driver rings or driver data structures/pointers * directly to MAC clients. * * MAC driver rules * ---------------- * * R14. It would be preferable if MAC drivers don't hold any locks across any * mac call. However at a minimum they must not hold any locks across data * upcalls. They must also make sure that all references to mac data structures * are cleaned up and that it is single threaded at mac_unregister time. * * R15. MAC driver interfaces don't block and so the action may be done * asynchronously in a separate thread as for example handling notifications. * The driver must not assume that the action is complete when the call * returns. * * R16. Drivers must maintain a generation number per Rx ring, and pass it * back to mac_rx_ring(); They are expected to increment the generation * number whenever the ring's stop routine is invoked. * See comments in mac_rx_ring(); * * R17 Similarly mi_stop is another synchronization point and the driver must * ensure that all upcalls are done and there won't be any future upcall * before returning from mi_stop. * * R18. The driver may assume that all set/modify control operations via * the mi_* entry points are single threaded on a per mac end point. * * Lock and Perimeter hierarchy scenarios * --------------------------------------- * * i_mac_impl_lock -> mi_rw_lock -> srs_lock -> s_ring_lock[i_mac_tx_srs_notify] * * ft_lock -> fe_lock [mac_flow_lookup] * * mi_rw_lock -> fe_lock [mac_bcast_send] * * srs_lock -> mac_bw_lock [mac_rx_srs_drain_bw] * * cpu_lock -> mac_srs_g_lock -> srs_lock -> s_ring_lock [mac_walk_srs_and_bind] * * i_dls_devnet_lock -> mac layer locks [dls_devnet_rename] * * Perimeters are ordered P1 -> P2 -> P3 from top to bottom in order of mac * client to driver. In the case of clients that explictly use the mac provided * perimeter mechanism for its serialization, the hierarchy is * Perimeter -> mac layer locks, since the client never holds any locks across * the mac calls. In the case of clients that use its own locks the hierarchy * is Client locks -> Mac Perim -> Mac layer locks. The client never explicitly * calls mac_perim_enter/exit in this case. * * Subflow creation rules * --------------------------- * o In case of a user specified cpulist present on underlying link and flows, * the flows cpulist must be a subset of the underlying link. * o In case of a user specified fanout mode present on link and flow, the * subflow fanout count has to be less than or equal to that of the * underlying link. The cpu-bindings for the subflows will be a subset of * the underlying link. * o In case if no cpulist specified on both underlying link and flow, the * underlying link relies on a MAC tunable to provide out of box fanout. * The subflow will have no cpulist (the subflow will be unbound) * o In case if no cpulist is specified on the underlying link, a subflow can * carry either a user-specified cpulist or fanout count. The cpu-bindings * for the subflow will not adhere to restriction that they need to be subset * of the underlying link. * o In case where the underlying link is carrying either a user specified * cpulist or fanout mode and for a unspecified subflow, the subflow will be * created unbound. * o While creating unbound subflows, bandwidth mode changes attempt to * figure a right fanout count. In such cases the fanout count will override * the unbound cpu-binding behavior. * o In addition to this, while cycling between flow and link properties, we * impose a restriction that if a link property has a subflow with * user-specified attributes, we will not allow changing the link property. * The administrator needs to reset all the user specified properties for the * subflows before attempting a link property change. * Some of the above rules can be overridden by specifying additional command * line options while creating or modifying link or subflow properties. * * Datapath * -------- * * For information on the datapath, the world of soft rings, hardware rings, how * it is structured, and the path of an mblk_t between a driver and a mac * client, see mac_sched.c. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define IMPL_HASHSZ 67 /* prime */ kmem_cache_t *i_mac_impl_cachep; mod_hash_t *i_mac_impl_hash; krwlock_t i_mac_impl_lock; uint_t i_mac_impl_count; static kmem_cache_t *mac_ring_cache; static id_space_t *minor_ids; static uint32_t minor_count; static pool_event_cb_t mac_pool_event_reg; /* * Logging stuff. Perhaps mac_logging_interval could be broken into * mac_flow_log_interval and mac_link_log_interval if we want to be * able to schedule them differently. */ uint_t mac_logging_interval; boolean_t mac_flow_log_enable; boolean_t mac_link_log_enable; timeout_id_t mac_logging_timer; #define MACTYPE_KMODDIR "mac" #define MACTYPE_HASHSZ 67 static mod_hash_t *i_mactype_hash; /* * i_mactype_lock synchronizes threads that obtain references to mactype_t * structures through i_mactype_getplugin(). */ static kmutex_t i_mactype_lock; /* * mac_tx_percpu_cnt * * Number of per cpu locks per mac_client_impl_t. Used by the transmit side * in mac_tx to reduce lock contention. This is sized at boot time in mac_init. * mac_tx_percpu_cnt_max is settable in /etc/system and must be a power of 2. * Per cpu locks may be disabled by setting mac_tx_percpu_cnt_max to 1. */ int mac_tx_percpu_cnt; int mac_tx_percpu_cnt_max = 128; /* * Call back functions for the bridge module. These are guaranteed to be valid * when holding a reference on a link or when holding mip->mi_bridge_lock and * mi_bridge_link is non-NULL. */ mac_bridge_tx_t mac_bridge_tx_cb; mac_bridge_rx_t mac_bridge_rx_cb; mac_bridge_ref_t mac_bridge_ref_cb; mac_bridge_ls_t mac_bridge_ls_cb; static int i_mac_constructor(void *, void *, int); static void i_mac_destructor(void *, void *); static int i_mac_ring_ctor(void *, void *, int); static void i_mac_ring_dtor(void *, void *); static mblk_t *mac_rx_classify(mac_impl_t *, mac_resource_handle_t, mblk_t *); void mac_tx_client_flush(mac_client_impl_t *); void mac_tx_client_block(mac_client_impl_t *); static void mac_rx_ring_quiesce(mac_ring_t *, uint_t); static int mac_start_group_and_rings(mac_group_t *); static void mac_stop_group_and_rings(mac_group_t *); static void mac_pool_event_cb(pool_event_t, int, void *); typedef struct netinfo_s { list_node_t ni_link; void *ni_record; int ni_size; int ni_type; } netinfo_t; /* * Module initialization functions. */ void mac_init(void) { mac_tx_percpu_cnt = ((boot_max_ncpus == -1) ? max_ncpus : boot_max_ncpus); /* Upper bound is mac_tx_percpu_cnt_max */ if (mac_tx_percpu_cnt > mac_tx_percpu_cnt_max) mac_tx_percpu_cnt = mac_tx_percpu_cnt_max; if (mac_tx_percpu_cnt < 1) { /* Someone set max_tx_percpu_cnt_max to 0 or less */ mac_tx_percpu_cnt = 1; } ASSERT(mac_tx_percpu_cnt >= 1); mac_tx_percpu_cnt = (1 << highbit(mac_tx_percpu_cnt - 1)); /* * Make it of the form 2**N - 1 in the range * [0 .. mac_tx_percpu_cnt_max - 1] */ mac_tx_percpu_cnt--; i_mac_impl_cachep = kmem_cache_create("mac_impl_cache", sizeof (mac_impl_t), 0, i_mac_constructor, i_mac_destructor, NULL, NULL, NULL, 0); ASSERT(i_mac_impl_cachep != NULL); mac_ring_cache = kmem_cache_create("mac_ring_cache", sizeof (mac_ring_t), 0, i_mac_ring_ctor, i_mac_ring_dtor, NULL, NULL, NULL, 0); ASSERT(mac_ring_cache != NULL); i_mac_impl_hash = mod_hash_create_extended("mac_impl_hash", IMPL_HASHSZ, mod_hash_null_keydtor, mod_hash_null_valdtor, mod_hash_bystr, NULL, mod_hash_strkey_cmp, KM_SLEEP); rw_init(&i_mac_impl_lock, NULL, RW_DEFAULT, NULL); mac_flow_init(); mac_soft_ring_init(); mac_bcast_init(); mac_client_init(); i_mac_impl_count = 0; i_mactype_hash = mod_hash_create_extended("mactype_hash", MACTYPE_HASHSZ, mod_hash_null_keydtor, mod_hash_null_valdtor, mod_hash_bystr, NULL, mod_hash_strkey_cmp, KM_SLEEP); /* * Allocate an id space to manage minor numbers. The range of the * space will be from MAC_MAX_MINOR+1 to MAC_PRIVATE_MINOR-1. This * leaves half of the 32-bit minors available for driver private use. */ minor_ids = id_space_create("mac_minor_ids", MAC_MAX_MINOR+1, MAC_PRIVATE_MINOR-1); ASSERT(minor_ids != NULL); minor_count = 0; /* Let's default to 20 seconds */ mac_logging_interval = 20; mac_flow_log_enable = B_FALSE; mac_link_log_enable = B_FALSE; mac_logging_timer = 0; /* Register to be notified of noteworthy pools events */ mac_pool_event_reg.pec_func = mac_pool_event_cb; mac_pool_event_reg.pec_arg = NULL; pool_event_cb_register(&mac_pool_event_reg); } int mac_fini(void) { if (i_mac_impl_count > 0 || minor_count > 0) return (EBUSY); pool_event_cb_unregister(&mac_pool_event_reg); id_space_destroy(minor_ids); mac_flow_fini(); mod_hash_destroy_hash(i_mac_impl_hash); rw_destroy(&i_mac_impl_lock); mac_client_fini(); kmem_cache_destroy(mac_ring_cache); mod_hash_destroy_hash(i_mactype_hash); mac_soft_ring_finish(); return (0); } /* * Initialize a GLDv3 driver's device ops. A driver that manages its own ops * (e.g. softmac) may pass in a NULL ops argument. */ void mac_init_ops(struct dev_ops *ops, const char *name) { major_t major = ddi_name_to_major((char *)name); /* * By returning on error below, we are not letting the driver continue * in an undefined context. The mac_register() function will faill if * DN_GLDV3_DRIVER isn't set. */ if (major == DDI_MAJOR_T_NONE) return; LOCK_DEV_OPS(&devnamesp[major].dn_lock); devnamesp[major].dn_flags |= (DN_GLDV3_DRIVER | DN_NETWORK_DRIVER); UNLOCK_DEV_OPS(&devnamesp[major].dn_lock); if (ops != NULL) dld_init_ops(ops, name); } void mac_fini_ops(struct dev_ops *ops) { dld_fini_ops(ops); } /*ARGSUSED*/ static int i_mac_constructor(void *buf, void *arg, int kmflag) { mac_impl_t *mip = buf; bzero(buf, sizeof (mac_impl_t)); mip->mi_linkstate = LINK_STATE_UNKNOWN; rw_init(&mip->mi_rw_lock, NULL, RW_DRIVER, NULL); mutex_init(&mip->mi_notify_lock, NULL, MUTEX_DRIVER, NULL); mutex_init(&mip->mi_promisc_lock, NULL, MUTEX_DRIVER, NULL); mutex_init(&mip->mi_ring_lock, NULL, MUTEX_DEFAULT, NULL); mip->mi_notify_cb_info.mcbi_lockp = &mip->mi_notify_lock; cv_init(&mip->mi_notify_cb_info.mcbi_cv, NULL, CV_DRIVER, NULL); mip->mi_promisc_cb_info.mcbi_lockp = &mip->mi_promisc_lock; cv_init(&mip->mi_promisc_cb_info.mcbi_cv, NULL, CV_DRIVER, NULL); mutex_init(&mip->mi_bridge_lock, NULL, MUTEX_DEFAULT, NULL); return (0); } /*ARGSUSED*/ static void i_mac_destructor(void *buf, void *arg) { mac_impl_t *mip = buf; mac_cb_info_t *mcbi; ASSERT(mip->mi_ref == 0); ASSERT(mip->mi_active == 0); ASSERT(mip->mi_linkstate == LINK_STATE_UNKNOWN); ASSERT(mip->mi_devpromisc == 0); ASSERT(mip->mi_ksp == NULL); ASSERT(mip->mi_kstat_count == 0); ASSERT(mip->mi_nclients == 0); ASSERT(mip->mi_nactiveclients == 0); ASSERT(mip->mi_single_active_client == NULL); ASSERT(mip->mi_state_flags == 0); ASSERT(mip->mi_factory_addr == NULL); ASSERT(mip->mi_factory_addr_num == 0); ASSERT(mip->mi_default_tx_ring == NULL); mcbi = &mip->mi_notify_cb_info; ASSERT(mcbi->mcbi_del_cnt == 0 && mcbi->mcbi_walker_cnt == 0); ASSERT(mip->mi_notify_bits == 0); ASSERT(mip->mi_notify_thread == NULL); ASSERT(mcbi->mcbi_lockp == &mip->mi_notify_lock); mcbi->mcbi_lockp = NULL; mcbi = &mip->mi_promisc_cb_info; ASSERT(mcbi->mcbi_del_cnt == 0 && mip->mi_promisc_list == NULL); ASSERT(mip->mi_promisc_list == NULL); ASSERT(mcbi->mcbi_lockp == &mip->mi_promisc_lock); mcbi->mcbi_lockp = NULL; ASSERT(mip->mi_bcast_ngrps == 0 && mip->mi_bcast_grp == NULL); ASSERT(mip->mi_perim_owner == NULL && mip->mi_perim_ocnt == 0); rw_destroy(&mip->mi_rw_lock); mutex_destroy(&mip->mi_promisc_lock); cv_destroy(&mip->mi_promisc_cb_info.mcbi_cv); mutex_destroy(&mip->mi_notify_lock); cv_destroy(&mip->mi_notify_cb_info.mcbi_cv); mutex_destroy(&mip->mi_ring_lock); ASSERT(mip->mi_bridge_link == NULL); } /* ARGSUSED */ static int i_mac_ring_ctor(void *buf, void *arg, int kmflag) { mac_ring_t *ring = (mac_ring_t *)buf; bzero(ring, sizeof (mac_ring_t)); cv_init(&ring->mr_cv, NULL, CV_DEFAULT, NULL); mutex_init(&ring->mr_lock, NULL, MUTEX_DEFAULT, NULL); ring->mr_state = MR_FREE; return (0); } /* ARGSUSED */ static void i_mac_ring_dtor(void *buf, void *arg) { mac_ring_t *ring = (mac_ring_t *)buf; cv_destroy(&ring->mr_cv); mutex_destroy(&ring->mr_lock); } /* * Common functions to do mac callback addition and deletion. Currently this is * used by promisc callbacks and notify callbacks. List addition and deletion * need to take care of list walkers. List walkers in general, can't hold list * locks and make upcall callbacks due to potential lock order and recursive * reentry issues. Instead list walkers increment the list walker count to mark * the presence of a walker thread. Addition can be carefully done to ensure * that the list walker always sees either the old list or the new list. * However the deletion can't be done while the walker is active, instead the * deleting thread simply marks the entry as logically deleted. The last walker * physically deletes and frees up the logically deleted entries when the walk * is complete. */ void mac_callback_add(mac_cb_info_t *mcbi, mac_cb_t **mcb_head, mac_cb_t *mcb_elem) { mac_cb_t *p; mac_cb_t **pp; /* Verify it is not already in the list */ for (pp = mcb_head; (p = *pp) != NULL; pp = &p->mcb_nextp) { if (p == mcb_elem) break; } VERIFY(p == NULL); /* * Add it to the head of the callback list. The membar ensures that * the following list pointer manipulations reach global visibility * in exactly the program order below. */ ASSERT(MUTEX_HELD(mcbi->mcbi_lockp)); mcb_elem->mcb_nextp = *mcb_head; membar_producer(); *mcb_head = mcb_elem; } /* * Mark the entry as logically deleted. If there aren't any walkers unlink * from the list. In either case return the corresponding status. */ boolean_t mac_callback_remove(mac_cb_info_t *mcbi, mac_cb_t **mcb_head, mac_cb_t *mcb_elem) { mac_cb_t *p; mac_cb_t **pp; ASSERT(MUTEX_HELD(mcbi->mcbi_lockp)); /* * Search the callback list for the entry to be removed */ for (pp = mcb_head; (p = *pp) != NULL; pp = &p->mcb_nextp) { if (p == mcb_elem) break; } VERIFY(p != NULL); /* * If there are walkers just mark it as deleted and the last walker * will remove from the list and free it. */ if (mcbi->mcbi_walker_cnt != 0) { p->mcb_flags |= MCB_CONDEMNED; mcbi->mcbi_del_cnt++; return (B_FALSE); } ASSERT(mcbi->mcbi_del_cnt == 0); *pp = p->mcb_nextp; p->mcb_nextp = NULL; return (B_TRUE); } /* * Wait for all pending callback removals to be completed */ void mac_callback_remove_wait(mac_cb_info_t *mcbi) { ASSERT(MUTEX_HELD(mcbi->mcbi_lockp)); while (mcbi->mcbi_del_cnt != 0) { DTRACE_PROBE1(need_wait, mac_cb_info_t *, mcbi); cv_wait(&mcbi->mcbi_cv, mcbi->mcbi_lockp); } } /* * The last mac callback walker does the cleanup. Walk the list and unlik * all the logically deleted entries and construct a temporary list of * removed entries. Return the list of removed entries to the caller. */ mac_cb_t * mac_callback_walker_cleanup(mac_cb_info_t *mcbi, mac_cb_t **mcb_head) { mac_cb_t *p; mac_cb_t **pp; mac_cb_t *rmlist = NULL; /* List of removed elements */ int cnt = 0; ASSERT(MUTEX_HELD(mcbi->mcbi_lockp)); ASSERT(mcbi->mcbi_del_cnt != 0 && mcbi->mcbi_walker_cnt == 0); pp = mcb_head; while (*pp != NULL) { if ((*pp)->mcb_flags & MCB_CONDEMNED) { p = *pp; *pp = p->mcb_nextp; p->mcb_nextp = rmlist; rmlist = p; cnt++; continue; } pp = &(*pp)->mcb_nextp; } ASSERT(mcbi->mcbi_del_cnt == cnt); mcbi->mcbi_del_cnt = 0; return (rmlist); } boolean_t mac_callback_lookup(mac_cb_t **mcb_headp, mac_cb_t *mcb_elem) { mac_cb_t *mcb; /* Verify it is not already in the list */ for (mcb = *mcb_headp; mcb != NULL; mcb = mcb->mcb_nextp) { if (mcb == mcb_elem) return (B_TRUE); } return (B_FALSE); } boolean_t mac_callback_find(mac_cb_info_t *mcbi, mac_cb_t **mcb_headp, mac_cb_t *mcb_elem) { boolean_t found; mutex_enter(mcbi->mcbi_lockp); found = mac_callback_lookup(mcb_headp, mcb_elem); mutex_exit(mcbi->mcbi_lockp); return (found); } /* Free the list of removed callbacks */ void mac_callback_free(mac_cb_t *rmlist) { mac_cb_t *mcb; mac_cb_t *mcb_next; for (mcb = rmlist; mcb != NULL; mcb = mcb_next) { mcb_next = mcb->mcb_nextp; kmem_free(mcb->mcb_objp, mcb->mcb_objsize); } } /* * The promisc callbacks are in 2 lists, one off the 'mip' and another off the * 'mcip' threaded by mpi_mi_link and mpi_mci_link respectively. However there * is only a single shared total walker count, and an entry can't be physically * unlinked if a walker is active on either list. The last walker does this * cleanup of logically deleted entries. */ void i_mac_promisc_walker_cleanup(mac_impl_t *mip) { mac_cb_t *rmlist; mac_cb_t *mcb; mac_cb_t *mcb_next; mac_promisc_impl_t *mpip; /* * Construct a temporary list of deleted callbacks by walking the * the mi_promisc_list. Then for each entry in the temporary list, * remove it from the mci_promisc_list and free the entry. */ rmlist = mac_callback_walker_cleanup(&mip->mi_promisc_cb_info, &mip->mi_promisc_list); for (mcb = rmlist; mcb != NULL; mcb = mcb_next) { mcb_next = mcb->mcb_nextp; mpip = (mac_promisc_impl_t *)mcb->mcb_objp; VERIFY(mac_callback_remove(&mip->mi_promisc_cb_info, &mpip->mpi_mcip->mci_promisc_list, &mpip->mpi_mci_link)); mcb->mcb_flags = 0; mcb->mcb_nextp = NULL; kmem_cache_free(mac_promisc_impl_cache, mpip); } } void i_mac_notify(mac_impl_t *mip, mac_notify_type_t type) { mac_cb_info_t *mcbi; /* * Signal the notify thread even after mi_ref has become zero and * mi_disabled is set. The synchronization with the notify thread * happens in mac_unregister and that implies the driver must make * sure it is single-threaded (with respect to mac calls) and that * all pending mac calls have returned before it calls mac_unregister */ rw_enter(&i_mac_impl_lock, RW_READER); if (mip->mi_state_flags & MIS_DISABLED) goto exit; /* * Guard against incorrect notifications. (Running a newer * mac client against an older implementation?) */ if (type >= MAC_NNOTE) goto exit; mcbi = &mip->mi_notify_cb_info; mutex_enter(mcbi->mcbi_lockp); mip->mi_notify_bits |= (1 << type); cv_broadcast(&mcbi->mcbi_cv); mutex_exit(mcbi->mcbi_lockp); exit: rw_exit(&i_mac_impl_lock); } /* * Mac serialization primitives. Please see the block comment at the * top of the file. */ void i_mac_perim_enter(mac_impl_t *mip) { mac_client_impl_t *mcip; if (mip->mi_state_flags & MIS_IS_VNIC) { /* * This is a VNIC. Return the lower mac since that is what * we want to serialize on. */ mcip = mac_vnic_lower(mip); mip = mcip->mci_mip; } mutex_enter(&mip->mi_perim_lock); if (mip->mi_perim_owner == curthread) { mip->mi_perim_ocnt++; mutex_exit(&mip->mi_perim_lock); return; } while (mip->mi_perim_owner != NULL) cv_wait(&mip->mi_perim_cv, &mip->mi_perim_lock); mip->mi_perim_owner = curthread; ASSERT(mip->mi_perim_ocnt == 0); mip->mi_perim_ocnt++; #ifdef DEBUG mip->mi_perim_stack_depth = getpcstack(mip->mi_perim_stack, MAC_PERIM_STACK_DEPTH); #endif mutex_exit(&mip->mi_perim_lock); } int i_mac_perim_enter_nowait(mac_impl_t *mip) { /* * The vnic is a special case, since the serialization is done based * on the lower mac. If the lower mac is busy, it does not imply the * vnic can't be unregistered. But in the case of other drivers, * a busy perimeter or open mac handles implies that the mac is busy * and can't be unregistered. */ if (mip->mi_state_flags & MIS_IS_VNIC) { i_mac_perim_enter(mip); return (0); } mutex_enter(&mip->mi_perim_lock); if (mip->mi_perim_owner != NULL) { mutex_exit(&mip->mi_perim_lock); return (EBUSY); } ASSERT(mip->mi_perim_ocnt == 0); mip->mi_perim_owner = curthread; mip->mi_perim_ocnt++; mutex_exit(&mip->mi_perim_lock); return (0); } void i_mac_perim_exit(mac_impl_t *mip) { mac_client_impl_t *mcip; if (mip->mi_state_flags & MIS_IS_VNIC) { /* * This is a VNIC. Return the lower mac since that is what * we want to serialize on. */ mcip = mac_vnic_lower(mip); mip = mcip->mci_mip; } ASSERT(mip->mi_perim_owner == curthread && mip->mi_perim_ocnt != 0); mutex_enter(&mip->mi_perim_lock); if (--mip->mi_perim_ocnt == 0) { mip->mi_perim_owner = NULL; cv_signal(&mip->mi_perim_cv); } mutex_exit(&mip->mi_perim_lock); } /* * Returns whether the current thread holds the mac perimeter. Used in making * assertions. */ boolean_t mac_perim_held(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; mac_client_impl_t *mcip; if (mip->mi_state_flags & MIS_IS_VNIC) { /* * This is a VNIC. Return the lower mac since that is what * we want to serialize on. */ mcip = mac_vnic_lower(mip); mip = mcip->mci_mip; } return (mip->mi_perim_owner == curthread); } /* * mac client interfaces to enter the mac perimeter of a mac end point, given * its mac handle, or macname or linkid. */ void mac_perim_enter_by_mh(mac_handle_t mh, mac_perim_handle_t *mphp) { mac_impl_t *mip = (mac_impl_t *)mh; i_mac_perim_enter(mip); /* * The mac_perim_handle_t returned encodes the 'mip' and whether a * mac_open has been done internally while entering the perimeter. * This information is used in mac_perim_exit */ MAC_ENCODE_MPH(*mphp, mip, 0); } int mac_perim_enter_by_macname(const char *name, mac_perim_handle_t *mphp) { int err; mac_handle_t mh; if ((err = mac_open(name, &mh)) != 0) return (err); mac_perim_enter_by_mh(mh, mphp); MAC_ENCODE_MPH(*mphp, mh, 1); return (0); } int mac_perim_enter_by_linkid(datalink_id_t linkid, mac_perim_handle_t *mphp) { int err; mac_handle_t mh; if ((err = mac_open_by_linkid(linkid, &mh)) != 0) return (err); mac_perim_enter_by_mh(mh, mphp); MAC_ENCODE_MPH(*mphp, mh, 1); return (0); } void mac_perim_exit(mac_perim_handle_t mph) { mac_impl_t *mip; boolean_t need_close; MAC_DECODE_MPH(mph, mip, need_close); i_mac_perim_exit(mip); if (need_close) mac_close((mac_handle_t)mip); } int mac_hold(const char *macname, mac_impl_t **pmip) { mac_impl_t *mip; int err; /* * Check the device name length to make sure it won't overflow our * buffer. */ if (strlen(macname) >= MAXNAMELEN) return (EINVAL); /* * Look up its entry in the global hash table. */ rw_enter(&i_mac_impl_lock, RW_WRITER); err = mod_hash_find(i_mac_impl_hash, (mod_hash_key_t)macname, (mod_hash_val_t *)&mip); if (err != 0) { rw_exit(&i_mac_impl_lock); return (ENOENT); } if (mip->mi_state_flags & MIS_DISABLED) { rw_exit(&i_mac_impl_lock); return (ENOENT); } if (mip->mi_state_flags & MIS_EXCLUSIVE_HELD) { rw_exit(&i_mac_impl_lock); return (EBUSY); } mip->mi_ref++; rw_exit(&i_mac_impl_lock); *pmip = mip; return (0); } void mac_rele(mac_impl_t *mip) { rw_enter(&i_mac_impl_lock, RW_WRITER); ASSERT(mip->mi_ref != 0); if (--mip->mi_ref == 0) { ASSERT(mip->mi_nactiveclients == 0 && !(mip->mi_state_flags & MIS_EXCLUSIVE)); } rw_exit(&i_mac_impl_lock); } /* * Private GLDv3 function to start a MAC instance. */ int mac_start(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; int err = 0; mac_group_t *defgrp; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); ASSERT(mip->mi_start != NULL); /* * Check whether the device is already started. */ if (mip->mi_active++ == 0) { mac_ring_t *ring = NULL; /* * Start the device. */ err = mip->mi_start(mip->mi_driver); if (err != 0) { mip->mi_active--; return (err); } /* * Start the default tx ring. */ if (mip->mi_default_tx_ring != NULL) { ring = (mac_ring_t *)mip->mi_default_tx_ring; if (ring->mr_state != MR_INUSE) { err = mac_start_ring(ring); if (err != 0) { mip->mi_active--; return (err); } } } if ((defgrp = MAC_DEFAULT_RX_GROUP(mip)) != NULL) { /* * Start the default ring, since it will be needed * to receive broadcast and multicast traffic for * both primary and non-primary MAC clients. */ ASSERT(defgrp->mrg_state == MAC_GROUP_STATE_REGISTERED); err = mac_start_group_and_rings(defgrp); if (err != 0) { mip->mi_active--; if ((ring != NULL) && (ring->mr_state == MR_INUSE)) mac_stop_ring(ring); return (err); } mac_set_group_state(defgrp, MAC_GROUP_STATE_SHARED); } } return (err); } /* * Private GLDv3 function to stop a MAC instance. */ void mac_stop(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; mac_group_t *grp; ASSERT(mip->mi_stop != NULL); ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); /* * Check whether the device is still needed. */ ASSERT(mip->mi_active != 0); if (--mip->mi_active == 0) { if ((grp = MAC_DEFAULT_RX_GROUP(mip)) != NULL) { /* * There should be no more active clients since the * MAC is being stopped. Stop the default RX group * and transition it back to registered state. * * When clients are torn down, the groups * are release via mac_release_rx_group which * knows the the default group is always in * started mode since broadcast uses it. So * we can assert that their are no clients * (since mac_bcast_add doesn't register itself * as a client) and group is in SHARED state. */ ASSERT(grp->mrg_state == MAC_GROUP_STATE_SHARED); ASSERT(MAC_GROUP_NO_CLIENT(grp) && mip->mi_nactiveclients == 0); mac_stop_group_and_rings(grp); mac_set_group_state(grp, MAC_GROUP_STATE_REGISTERED); } if (mip->mi_default_tx_ring != NULL) { mac_ring_t *ring; ring = (mac_ring_t *)mip->mi_default_tx_ring; if (ring->mr_state == MR_INUSE) { mac_stop_ring(ring); ring->mr_flag = 0; } } /* * Stop the device. */ mip->mi_stop(mip->mi_driver); } } int i_mac_promisc_set(mac_impl_t *mip, boolean_t on) { int err = 0; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); ASSERT(mip->mi_setpromisc != NULL); if (on) { /* * Enable promiscuous mode on the device if not yet enabled. */ if (mip->mi_devpromisc++ == 0) { err = mip->mi_setpromisc(mip->mi_driver, B_TRUE); if (err != 0) { mip->mi_devpromisc--; return (err); } i_mac_notify(mip, MAC_NOTE_DEVPROMISC); } } else { if (mip->mi_devpromisc == 0) return (EPROTO); /* * Disable promiscuous mode on the device if this is the last * enabling. */ if (--mip->mi_devpromisc == 0) { err = mip->mi_setpromisc(mip->mi_driver, B_FALSE); if (err != 0) { mip->mi_devpromisc++; return (err); } i_mac_notify(mip, MAC_NOTE_DEVPROMISC); } } return (0); } /* * The promiscuity state can change any time. If the caller needs to take * actions that are atomic with the promiscuity state, then the caller needs * to bracket the entire sequence with mac_perim_enter/exit */ boolean_t mac_promisc_get(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; /* * Return the current promiscuity. */ return (mip->mi_devpromisc != 0); } /* * Invoked at MAC instance attach time to initialize the list * of factory MAC addresses supported by a MAC instance. This function * builds a local cache in the mac_impl_t for the MAC addresses * supported by the underlying hardware. The MAC clients themselves * use the mac_addr_factory*() functions to query and reserve * factory MAC addresses. */ void mac_addr_factory_init(mac_impl_t *mip) { mac_capab_multifactaddr_t capab; uint8_t *addr; int i; /* * First round to see how many factory MAC addresses are available. */ bzero(&capab, sizeof (capab)); if (!i_mac_capab_get((mac_handle_t)mip, MAC_CAPAB_MULTIFACTADDR, &capab) || (capab.mcm_naddr == 0)) { /* * The MAC instance doesn't support multiple factory * MAC addresses, we're done here. */ return; } /* * Allocate the space and get all the factory addresses. */ addr = kmem_alloc(capab.mcm_naddr * MAXMACADDRLEN, KM_SLEEP); capab.mcm_getaddr(mip->mi_driver, capab.mcm_naddr, addr); mip->mi_factory_addr_num = capab.mcm_naddr; mip->mi_factory_addr = kmem_zalloc(mip->mi_factory_addr_num * sizeof (mac_factory_addr_t), KM_SLEEP); for (i = 0; i < capab.mcm_naddr; i++) { bcopy(addr + i * MAXMACADDRLEN, mip->mi_factory_addr[i].mfa_addr, mip->mi_type->mt_addr_length); mip->mi_factory_addr[i].mfa_in_use = B_FALSE; } kmem_free(addr, capab.mcm_naddr * MAXMACADDRLEN); } void mac_addr_factory_fini(mac_impl_t *mip) { if (mip->mi_factory_addr == NULL) { ASSERT(mip->mi_factory_addr_num == 0); return; } kmem_free(mip->mi_factory_addr, mip->mi_factory_addr_num * sizeof (mac_factory_addr_t)); mip->mi_factory_addr = NULL; mip->mi_factory_addr_num = 0; } /* * Reserve a factory MAC address. If *slot is set to -1, the function * attempts to reserve any of the available factory MAC addresses and * returns the reserved slot id. If no slots are available, the function * returns ENOSPC. If *slot is not set to -1, the function reserves * the specified slot if it is available, or returns EBUSY is the slot * is already used. Returns ENOTSUP if the underlying MAC does not * support multiple factory addresses. If the slot number is not -1 but * is invalid, returns EINVAL. */ int mac_addr_factory_reserve(mac_client_handle_t mch, int *slot) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; int i, ret = 0; i_mac_perim_enter(mip); /* * Protect against concurrent readers that may need a self-consistent * view of the factory addresses */ rw_enter(&mip->mi_rw_lock, RW_WRITER); if (mip->mi_factory_addr_num == 0) { ret = ENOTSUP; goto bail; } if (*slot != -1) { /* check the specified slot */ if (*slot < 1 || *slot > mip->mi_factory_addr_num) { ret = EINVAL; goto bail; } if (mip->mi_factory_addr[*slot-1].mfa_in_use) { ret = EBUSY; goto bail; } } else { /* pick the next available slot */ for (i = 0; i < mip->mi_factory_addr_num; i++) { if (!mip->mi_factory_addr[i].mfa_in_use) break; } if (i == mip->mi_factory_addr_num) { ret = ENOSPC; goto bail; } *slot = i+1; } mip->mi_factory_addr[*slot-1].mfa_in_use = B_TRUE; mip->mi_factory_addr[*slot-1].mfa_client = mcip; bail: rw_exit(&mip->mi_rw_lock); i_mac_perim_exit(mip); return (ret); } /* * Release the specified factory MAC address slot. */ void mac_addr_factory_release(mac_client_handle_t mch, uint_t slot) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; i_mac_perim_enter(mip); /* * Protect against concurrent readers that may need a self-consistent * view of the factory addresses */ rw_enter(&mip->mi_rw_lock, RW_WRITER); ASSERT(slot > 0 && slot <= mip->mi_factory_addr_num); ASSERT(mip->mi_factory_addr[slot-1].mfa_in_use); mip->mi_factory_addr[slot-1].mfa_in_use = B_FALSE; rw_exit(&mip->mi_rw_lock); i_mac_perim_exit(mip); } /* * Stores in mac_addr the value of the specified MAC address. Returns * 0 on success, or EINVAL if the slot number is not valid for the MAC. * The caller must provide a string of at least MAXNAMELEN bytes. */ void mac_addr_factory_value(mac_handle_t mh, int slot, uchar_t *mac_addr, uint_t *addr_len, char *client_name, boolean_t *in_use_arg) { mac_impl_t *mip = (mac_impl_t *)mh; boolean_t in_use; ASSERT(slot > 0 && slot <= mip->mi_factory_addr_num); /* * Readers need to hold mi_rw_lock. Writers need to hold mac perimeter * and mi_rw_lock */ rw_enter(&mip->mi_rw_lock, RW_READER); bcopy(mip->mi_factory_addr[slot-1].mfa_addr, mac_addr, MAXMACADDRLEN); *addr_len = mip->mi_type->mt_addr_length; in_use = mip->mi_factory_addr[slot-1].mfa_in_use; if (in_use && client_name != NULL) { bcopy(mip->mi_factory_addr[slot-1].mfa_client->mci_name, client_name, MAXNAMELEN); } if (in_use_arg != NULL) *in_use_arg = in_use; rw_exit(&mip->mi_rw_lock); } /* * Returns the number of factory MAC addresses (in addition to the * primary MAC address), 0 if the underlying MAC doesn't support * that feature. */ uint_t mac_addr_factory_num(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; return (mip->mi_factory_addr_num); } void mac_rx_group_unmark(mac_group_t *grp, uint_t flag) { mac_ring_t *ring; for (ring = grp->mrg_rings; ring != NULL; ring = ring->mr_next) ring->mr_flag &= ~flag; } /* * The following mac_hwrings_xxx() functions are private mac client functions * used by the aggr driver to access and control the underlying HW Rx group * and rings. In this case, the aggr driver has exclusive control of the * underlying HW Rx group/rings, it calls the following functions to * start/stop the HW Rx rings, disable/enable polling, add/remove mac' * addresses, or set up the Rx callback. */ /* ARGSUSED */ static void mac_hwrings_rx_process(void *arg, mac_resource_handle_t srs, mblk_t *mp_chain, boolean_t loopback) { mac_soft_ring_set_t *mac_srs = (mac_soft_ring_set_t *)srs; mac_srs_rx_t *srs_rx = &mac_srs->srs_rx; mac_direct_rx_t proc; void *arg1; mac_resource_handle_t arg2; proc = srs_rx->sr_func; arg1 = srs_rx->sr_arg1; arg2 = mac_srs->srs_mrh; proc(arg1, arg2, mp_chain, NULL); } /* * This function is called to get the list of HW rings that are reserved by * an exclusive mac client. * * Return value: the number of HW rings. */ int mac_hwrings_get(mac_client_handle_t mch, mac_group_handle_t *hwgh, mac_ring_handle_t *hwrh, mac_ring_type_t rtype) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; flow_entry_t *flent = mcip->mci_flent; mac_group_t *grp; mac_ring_t *ring; int cnt = 0; if (rtype == MAC_RING_TYPE_RX) { grp = flent->fe_rx_ring_group; } else if (rtype == MAC_RING_TYPE_TX) { grp = flent->fe_tx_ring_group; } else { ASSERT(B_FALSE); return (-1); } /* * The mac client did not reserve any RX group, return directly. * This is probably because the underlying MAC does not support * any groups. */ if (hwgh != NULL) *hwgh = NULL; if (grp == NULL) return (0); /* * This group must be reserved by this mac client. */ ASSERT((grp->mrg_state == MAC_GROUP_STATE_RESERVED) && (mcip == MAC_GROUP_ONLY_CLIENT(grp))); for (ring = grp->mrg_rings; ring != NULL; ring = ring->mr_next, cnt++) { ASSERT(cnt < MAX_RINGS_PER_GROUP); hwrh[cnt] = (mac_ring_handle_t)ring; } if (hwgh != NULL) *hwgh = (mac_group_handle_t)grp; return (cnt); } /* * This function is called to get info about Tx/Rx rings. * * Return value: returns uint_t which will have various bits set * that indicates different properties of the ring. */ uint_t mac_hwring_getinfo(mac_ring_handle_t rh) { mac_ring_t *ring = (mac_ring_t *)rh; mac_ring_info_t *info = &ring->mr_info; return (info->mri_flags); } /* * Export ddi interrupt handles from the HW ring to the pseudo ring and * setup the RX callback of the mac client which exclusively controls * HW ring. */ void mac_hwring_setup(mac_ring_handle_t hwrh, mac_resource_handle_t prh, mac_ring_handle_t pseudo_rh) { mac_ring_t *hw_ring = (mac_ring_t *)hwrh; mac_ring_t *pseudo_ring; mac_soft_ring_set_t *mac_srs = hw_ring->mr_srs; if (pseudo_rh != NULL) { pseudo_ring = (mac_ring_t *)pseudo_rh; /* Export the ddi handles to pseudo ring */ pseudo_ring->mr_info.mri_intr.mi_ddi_handle = hw_ring->mr_info.mri_intr.mi_ddi_handle; pseudo_ring->mr_info.mri_intr.mi_ddi_shared = hw_ring->mr_info.mri_intr.mi_ddi_shared; /* * Save a pointer to pseudo ring in the hw ring. If * interrupt handle changes, the hw ring will be * notified of the change (see mac_ring_intr_set()) * and the appropriate change has to be made to * the pseudo ring that has exported the ddi handle. */ hw_ring->mr_prh = pseudo_rh; } if (hw_ring->mr_type == MAC_RING_TYPE_RX) { ASSERT(!(mac_srs->srs_type & SRST_TX)); mac_srs->srs_mrh = prh; mac_srs->srs_rx.sr_lower_proc = mac_hwrings_rx_process; } } void mac_hwring_teardown(mac_ring_handle_t hwrh) { mac_ring_t *hw_ring = (mac_ring_t *)hwrh; mac_soft_ring_set_t *mac_srs; if (hw_ring == NULL) return; hw_ring->mr_prh = NULL; if (hw_ring->mr_type == MAC_RING_TYPE_RX) { mac_srs = hw_ring->mr_srs; ASSERT(!(mac_srs->srs_type & SRST_TX)); mac_srs->srs_rx.sr_lower_proc = mac_rx_srs_process; mac_srs->srs_mrh = NULL; } } int mac_hwring_disable_intr(mac_ring_handle_t rh) { mac_ring_t *rr_ring = (mac_ring_t *)rh; mac_intr_t *intr = &rr_ring->mr_info.mri_intr; return (intr->mi_disable(intr->mi_handle)); } int mac_hwring_enable_intr(mac_ring_handle_t rh) { mac_ring_t *rr_ring = (mac_ring_t *)rh; mac_intr_t *intr = &rr_ring->mr_info.mri_intr; return (intr->mi_enable(intr->mi_handle)); } int mac_hwring_start(mac_ring_handle_t rh) { mac_ring_t *rr_ring = (mac_ring_t *)rh; MAC_RING_UNMARK(rr_ring, MR_QUIESCE); return (0); } void mac_hwring_stop(mac_ring_handle_t rh) { mac_ring_t *rr_ring = (mac_ring_t *)rh; mac_rx_ring_quiesce(rr_ring, MR_QUIESCE); } mblk_t * mac_hwring_poll(mac_ring_handle_t rh, int bytes_to_pickup) { mac_ring_t *rr_ring = (mac_ring_t *)rh; mac_ring_info_t *info = &rr_ring->mr_info; return (info->mri_poll(info->mri_driver, bytes_to_pickup)); } /* * Send packets through a selected tx ring. */ mblk_t * mac_hwring_tx(mac_ring_handle_t rh, mblk_t *mp) { mac_ring_t *ring = (mac_ring_t *)rh; mac_ring_info_t *info = &ring->mr_info; ASSERT(ring->mr_type == MAC_RING_TYPE_TX && ring->mr_state >= MR_INUSE); return (info->mri_tx(info->mri_driver, mp)); } /* * Query stats for a particular rx/tx ring */ int mac_hwring_getstat(mac_ring_handle_t rh, uint_t stat, uint64_t *val) { mac_ring_t *ring = (mac_ring_t *)rh; mac_ring_info_t *info = &ring->mr_info; return (info->mri_stat(info->mri_driver, stat, val)); } /* * Private function that is only used by aggr to send packets through * a port/Tx ring. Since aggr exposes a pseudo Tx ring even for ports * that does not expose Tx rings, aggr_ring_tx() entry point needs * access to mac_impl_t to send packets through m_tx() entry point. * It accomplishes this by calling mac_hwring_send_priv() function. */ mblk_t * mac_hwring_send_priv(mac_client_handle_t mch, mac_ring_handle_t rh, mblk_t *mp) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; MAC_TX(mip, rh, mp, mcip); return (mp); } /* * Private function that is only used by aggr to update the default transmission * ring. Because aggr exposes a pseudo Tx ring even for ports that may * temporarily be down, it may need to update the default ring that is used by * MAC such that it refers to a link that can actively be used to send traffic. * Note that this is different from the case where the port has been removed * from the group. In those cases, all of the rings will be torn down because * the ring will no longer exist. It's important to give aggr a case where the * rings can still exist such that it may be able to continue to send LACP PDUs * to potentially restore the link. * * Finally, we explicitly don't do anything if the ring hasn't been enabled yet. * This is to help out aggr which doesn't really know the internal state that * MAC does about the rings and can't know that it's not quite ready for use * yet. */ void mac_hwring_set_default(mac_handle_t mh, mac_ring_handle_t rh) { mac_impl_t *mip = (mac_impl_t *)mh; mac_ring_t *ring = (mac_ring_t *)rh; ASSERT(MAC_PERIM_HELD(mh)); VERIFY(mip->mi_state_flags & MIS_IS_AGGR); if (ring->mr_state != MR_INUSE) return; mip->mi_default_tx_ring = rh; } int mac_hwgroup_addmac(mac_group_handle_t gh, const uint8_t *addr) { mac_group_t *group = (mac_group_t *)gh; return (mac_group_addmac(group, addr)); } int mac_hwgroup_remmac(mac_group_handle_t gh, const uint8_t *addr) { mac_group_t *group = (mac_group_t *)gh; return (mac_group_remmac(group, addr)); } /* * Set the RX group to be shared/reserved. Note that the group must be * started/stopped outside of this function. */ void mac_set_group_state(mac_group_t *grp, mac_group_state_t state) { /* * If there is no change in the group state, just return. */ if (grp->mrg_state == state) return; switch (state) { case MAC_GROUP_STATE_RESERVED: /* * Successfully reserved the group. * * Given that there is an exclusive client controlling this * group, we enable the group level polling when available, * so that SRSs get to turn on/off individual rings they's * assigned to. */ ASSERT(MAC_PERIM_HELD(grp->mrg_mh)); if (grp->mrg_type == MAC_RING_TYPE_RX && GROUP_INTR_DISABLE_FUNC(grp) != NULL) { GROUP_INTR_DISABLE_FUNC(grp)(GROUP_INTR_HANDLE(grp)); } break; case MAC_GROUP_STATE_SHARED: /* * Set all rings of this group to software classified. * If the group has an overriding interrupt, then re-enable it. */ ASSERT(MAC_PERIM_HELD(grp->mrg_mh)); if (grp->mrg_type == MAC_RING_TYPE_RX && GROUP_INTR_ENABLE_FUNC(grp) != NULL) { GROUP_INTR_ENABLE_FUNC(grp)(GROUP_INTR_HANDLE(grp)); } /* The ring is not available for reservations any more */ break; case MAC_GROUP_STATE_REGISTERED: /* Also callable from mac_register, perim is not held */ break; default: ASSERT(B_FALSE); break; } grp->mrg_state = state; } /* * Quiesce future hardware classified packets for the specified Rx ring */ static void mac_rx_ring_quiesce(mac_ring_t *rx_ring, uint_t ring_flag) { ASSERT(rx_ring->mr_classify_type == MAC_HW_CLASSIFIER); ASSERT(ring_flag == MR_CONDEMNED || ring_flag == MR_QUIESCE); mutex_enter(&rx_ring->mr_lock); rx_ring->mr_flag |= ring_flag; while (rx_ring->mr_refcnt != 0) cv_wait(&rx_ring->mr_cv, &rx_ring->mr_lock); mutex_exit(&rx_ring->mr_lock); } /* * Please see mac_tx for details about the per cpu locking scheme */ static void mac_tx_lock_all(mac_client_impl_t *mcip) { int i; for (i = 0; i <= mac_tx_percpu_cnt; i++) mutex_enter(&mcip->mci_tx_pcpu[i].pcpu_tx_lock); } static void mac_tx_unlock_all(mac_client_impl_t *mcip) { int i; for (i = mac_tx_percpu_cnt; i >= 0; i--) mutex_exit(&mcip->mci_tx_pcpu[i].pcpu_tx_lock); } static void mac_tx_unlock_allbutzero(mac_client_impl_t *mcip) { int i; for (i = mac_tx_percpu_cnt; i > 0; i--) mutex_exit(&mcip->mci_tx_pcpu[i].pcpu_tx_lock); } static int mac_tx_sum_refcnt(mac_client_impl_t *mcip) { int i; int refcnt = 0; for (i = 0; i <= mac_tx_percpu_cnt; i++) refcnt += mcip->mci_tx_pcpu[i].pcpu_tx_refcnt; return (refcnt); } /* * Stop future Tx packets coming down from the client in preparation for * quiescing the Tx side. This is needed for dynamic reclaim and reassignment * of rings between clients */ void mac_tx_client_block(mac_client_impl_t *mcip) { mac_tx_lock_all(mcip); mcip->mci_tx_flag |= MCI_TX_QUIESCE; while (mac_tx_sum_refcnt(mcip) != 0) { mac_tx_unlock_allbutzero(mcip); cv_wait(&mcip->mci_tx_cv, &mcip->mci_tx_pcpu[0].pcpu_tx_lock); mutex_exit(&mcip->mci_tx_pcpu[0].pcpu_tx_lock); mac_tx_lock_all(mcip); } mac_tx_unlock_all(mcip); } void mac_tx_client_unblock(mac_client_impl_t *mcip) { mac_tx_lock_all(mcip); mcip->mci_tx_flag &= ~MCI_TX_QUIESCE; mac_tx_unlock_all(mcip); /* * We may fail to disable flow control for the last MAC_NOTE_TX * notification because the MAC client is quiesced. Send the * notification again. */ i_mac_notify(mcip->mci_mip, MAC_NOTE_TX); } /* * Wait for an SRS to quiesce. The SRS worker will signal us when the * quiesce is done. */ static void mac_srs_quiesce_wait(mac_soft_ring_set_t *srs, uint_t srs_flag) { mutex_enter(&srs->srs_lock); while (!(srs->srs_state & srs_flag)) cv_wait(&srs->srs_quiesce_done_cv, &srs->srs_lock); mutex_exit(&srs->srs_lock); } /* * Quiescing an Rx SRS is achieved by the following sequence. The protocol * works bottom up by cutting off packet flow from the bottommost point in the * mac, then the SRS, and then the soft rings. There are 2 use cases of this * mechanism. One is a temporary quiesce of the SRS, such as say while changing * the Rx callbacks. Another use case is Rx SRS teardown. In the former case * the QUIESCE prefix/suffix is used and in the latter the CONDEMNED is used * for the SRS and MR flags. In the former case the threads pause waiting for * a restart, while in the latter case the threads exit. The Tx SRS teardown * is also mostly similar to the above. * * 1. Stop future hardware classified packets at the lowest level in the mac. * Remove any hardware classification rule (CONDEMNED case) and mark the * rings as CONDEMNED or QUIESCE as appropriate. This prevents the mr_refcnt * from increasing. Upcalls from the driver that come through hardware * classification will be dropped in mac_rx from now on. Then we wait for * the mr_refcnt to drop to zero. When the mr_refcnt reaches zero we are * sure there aren't any upcall threads from the driver through hardware * classification. In the case of SRS teardown we also remove the * classification rule in the driver. * * 2. Stop future software classified packets by marking the flow entry with * FE_QUIESCE or FE_CONDEMNED as appropriate which prevents the refcnt from * increasing. We also remove the flow entry from the table in the latter * case. Then wait for the fe_refcnt to reach an appropriate quiescent value * that indicates there aren't any active threads using that flow entry. * * 3. Quiesce the SRS and softrings by signaling the SRS. The SRS poll thread, * SRS worker thread, and the soft ring threads are quiesced in sequence * with the SRS worker thread serving as a master controller. This * mechansim is explained in mac_srs_worker_quiesce(). * * The restart mechanism to reactivate the SRS and softrings is explained * in mac_srs_worker_restart(). Here we just signal the SRS worker to start the * restart sequence. */ void mac_rx_srs_quiesce(mac_soft_ring_set_t *srs, uint_t srs_quiesce_flag) { flow_entry_t *flent = srs->srs_flent; uint_t mr_flag, srs_done_flag; ASSERT(MAC_PERIM_HELD((mac_handle_t)FLENT_TO_MIP(flent))); ASSERT(!(srs->srs_type & SRST_TX)); if (srs_quiesce_flag == SRS_CONDEMNED) { mr_flag = MR_CONDEMNED; srs_done_flag = SRS_CONDEMNED_DONE; if (srs->srs_type & SRST_CLIENT_POLL_ENABLED) mac_srs_client_poll_disable(srs->srs_mcip, srs); } else { ASSERT(srs_quiesce_flag == SRS_QUIESCE); mr_flag = MR_QUIESCE; srs_done_flag = SRS_QUIESCE_DONE; if (srs->srs_type & SRST_CLIENT_POLL_ENABLED) mac_srs_client_poll_quiesce(srs->srs_mcip, srs); } if (srs->srs_ring != NULL) { mac_rx_ring_quiesce(srs->srs_ring, mr_flag); } else { /* * SRS is driven by software classification. In case * of CONDEMNED, the top level teardown functions will * deal with flow removal. */ if (srs_quiesce_flag != SRS_CONDEMNED) { FLOW_MARK(flent, FE_QUIESCE); mac_flow_wait(flent, FLOW_DRIVER_UPCALL); } } /* * Signal the SRS to quiesce itself, and then cv_wait for the * SRS quiesce to complete. The SRS worker thread will wake us * up when the quiesce is complete */ mac_srs_signal(srs, srs_quiesce_flag); mac_srs_quiesce_wait(srs, srs_done_flag); } /* * Remove an SRS. */ void mac_rx_srs_remove(mac_soft_ring_set_t *srs) { flow_entry_t *flent = srs->srs_flent; int i; mac_rx_srs_quiesce(srs, SRS_CONDEMNED); /* * Locate and remove our entry in the fe_rx_srs[] array, and * adjust the fe_rx_srs array entries and array count by * moving the last entry into the vacated spot. */ mutex_enter(&flent->fe_lock); for (i = 0; i < flent->fe_rx_srs_cnt; i++) { if (flent->fe_rx_srs[i] == srs) break; } ASSERT(i != 0 && i < flent->fe_rx_srs_cnt); if (i != flent->fe_rx_srs_cnt - 1) { flent->fe_rx_srs[i] = flent->fe_rx_srs[flent->fe_rx_srs_cnt - 1]; i = flent->fe_rx_srs_cnt - 1; } flent->fe_rx_srs[i] = NULL; flent->fe_rx_srs_cnt--; mutex_exit(&flent->fe_lock); mac_srs_free(srs); } static void mac_srs_clear_flag(mac_soft_ring_set_t *srs, uint_t flag) { mutex_enter(&srs->srs_lock); srs->srs_state &= ~flag; mutex_exit(&srs->srs_lock); } void mac_rx_srs_restart(mac_soft_ring_set_t *srs) { flow_entry_t *flent = srs->srs_flent; mac_ring_t *mr; ASSERT(MAC_PERIM_HELD((mac_handle_t)FLENT_TO_MIP(flent))); ASSERT((srs->srs_type & SRST_TX) == 0); /* * This handles a change in the number of SRSs between the quiesce and * and restart operation of a flow. */ if (!SRS_QUIESCED(srs)) return; /* * Signal the SRS to restart itself. Wait for the restart to complete * Note that we only restart the SRS if it is not marked as * permanently quiesced. */ if (!SRS_QUIESCED_PERMANENT(srs)) { mac_srs_signal(srs, SRS_RESTART); mac_srs_quiesce_wait(srs, SRS_RESTART_DONE); mac_srs_clear_flag(srs, SRS_RESTART_DONE); mac_srs_client_poll_restart(srs->srs_mcip, srs); } /* Finally clear the flags to let the packets in */ mr = srs->srs_ring; if (mr != NULL) { MAC_RING_UNMARK(mr, MR_QUIESCE); /* In case the ring was stopped, safely restart it */ if (mr->mr_state != MR_INUSE) (void) mac_start_ring(mr); } else { FLOW_UNMARK(flent, FE_QUIESCE); } } /* * Temporary quiesce of a flow and associated Rx SRS. * Please see block comment above mac_rx_classify_flow_rem. */ /* ARGSUSED */ int mac_rx_classify_flow_quiesce(flow_entry_t *flent, void *arg) { int i; for (i = 0; i < flent->fe_rx_srs_cnt; i++) { mac_rx_srs_quiesce((mac_soft_ring_set_t *)flent->fe_rx_srs[i], SRS_QUIESCE); } return (0); } /* * Restart a flow and associated Rx SRS that has been quiesced temporarily * Please see block comment above mac_rx_classify_flow_rem */ /* ARGSUSED */ int mac_rx_classify_flow_restart(flow_entry_t *flent, void *arg) { int i; for (i = 0; i < flent->fe_rx_srs_cnt; i++) mac_rx_srs_restart((mac_soft_ring_set_t *)flent->fe_rx_srs[i]); return (0); } void mac_srs_perm_quiesce(mac_client_handle_t mch, boolean_t on) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; flow_entry_t *flent = mcip->mci_flent; mac_impl_t *mip = mcip->mci_mip; mac_soft_ring_set_t *mac_srs; int i; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); if (flent == NULL) return; for (i = 0; i < flent->fe_rx_srs_cnt; i++) { mac_srs = flent->fe_rx_srs[i]; mutex_enter(&mac_srs->srs_lock); if (on) mac_srs->srs_state |= SRS_QUIESCE_PERM; else mac_srs->srs_state &= ~SRS_QUIESCE_PERM; mutex_exit(&mac_srs->srs_lock); } } void mac_rx_client_quiesce(mac_client_handle_t mch) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); if (MCIP_DATAPATH_SETUP(mcip)) { (void) mac_rx_classify_flow_quiesce(mcip->mci_flent, NULL); (void) mac_flow_walk_nolock(mcip->mci_subflow_tab, mac_rx_classify_flow_quiesce, NULL); } } void mac_rx_client_restart(mac_client_handle_t mch) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); if (MCIP_DATAPATH_SETUP(mcip)) { (void) mac_rx_classify_flow_restart(mcip->mci_flent, NULL); (void) mac_flow_walk_nolock(mcip->mci_subflow_tab, mac_rx_classify_flow_restart, NULL); } } /* * This function only quiesces the Tx SRS and softring worker threads. Callers * need to make sure that there aren't any mac client threads doing current or * future transmits in the mac before calling this function. */ void mac_tx_srs_quiesce(mac_soft_ring_set_t *srs, uint_t srs_quiesce_flag) { mac_client_impl_t *mcip = srs->srs_mcip; ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip)); ASSERT(srs->srs_type & SRST_TX); ASSERT(srs_quiesce_flag == SRS_CONDEMNED || srs_quiesce_flag == SRS_QUIESCE); /* * Signal the SRS to quiesce itself, and then cv_wait for the * SRS quiesce to complete. The SRS worker thread will wake us * up when the quiesce is complete */ mac_srs_signal(srs, srs_quiesce_flag); mac_srs_quiesce_wait(srs, srs_quiesce_flag == SRS_QUIESCE ? SRS_QUIESCE_DONE : SRS_CONDEMNED_DONE); } void mac_tx_srs_restart(mac_soft_ring_set_t *srs) { /* * Resizing the fanout could result in creation of new SRSs. * They may not necessarily be in the quiesced state in which * case it need be restarted */ if (!SRS_QUIESCED(srs)) return; mac_srs_signal(srs, SRS_RESTART); mac_srs_quiesce_wait(srs, SRS_RESTART_DONE); mac_srs_clear_flag(srs, SRS_RESTART_DONE); } /* * Temporary quiesce of a flow and associated Rx SRS. * Please see block comment above mac_rx_srs_quiesce */ /* ARGSUSED */ int mac_tx_flow_quiesce(flow_entry_t *flent, void *arg) { /* * The fe_tx_srs is null for a subflow on an interface that is * not plumbed */ if (flent->fe_tx_srs != NULL) mac_tx_srs_quiesce(flent->fe_tx_srs, SRS_QUIESCE); return (0); } /* ARGSUSED */ int mac_tx_flow_restart(flow_entry_t *flent, void *arg) { /* * The fe_tx_srs is null for a subflow on an interface that is * not plumbed */ if (flent->fe_tx_srs != NULL) mac_tx_srs_restart(flent->fe_tx_srs); return (0); } static void i_mac_tx_client_quiesce(mac_client_handle_t mch, uint_t srs_quiesce_flag) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip)); mac_tx_client_block(mcip); if (MCIP_TX_SRS(mcip) != NULL) { mac_tx_srs_quiesce(MCIP_TX_SRS(mcip), srs_quiesce_flag); (void) mac_flow_walk_nolock(mcip->mci_subflow_tab, mac_tx_flow_quiesce, NULL); } } void mac_tx_client_quiesce(mac_client_handle_t mch) { i_mac_tx_client_quiesce(mch, SRS_QUIESCE); } void mac_tx_client_condemn(mac_client_handle_t mch) { i_mac_tx_client_quiesce(mch, SRS_CONDEMNED); } void mac_tx_client_restart(mac_client_handle_t mch) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip)); mac_tx_client_unblock(mcip); if (MCIP_TX_SRS(mcip) != NULL) { mac_tx_srs_restart(MCIP_TX_SRS(mcip)); (void) mac_flow_walk_nolock(mcip->mci_subflow_tab, mac_tx_flow_restart, NULL); } } void mac_tx_client_flush(mac_client_impl_t *mcip) { ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip)); mac_tx_client_quiesce((mac_client_handle_t)mcip); mac_tx_client_restart((mac_client_handle_t)mcip); } void mac_client_quiesce(mac_client_impl_t *mcip) { mac_rx_client_quiesce((mac_client_handle_t)mcip); mac_tx_client_quiesce((mac_client_handle_t)mcip); } void mac_client_restart(mac_client_impl_t *mcip) { mac_rx_client_restart((mac_client_handle_t)mcip); mac_tx_client_restart((mac_client_handle_t)mcip); } /* * Allocate a minor number. */ minor_t mac_minor_hold(boolean_t sleep) { id_t id; /* * Grab a value from the arena. */ atomic_inc_32(&minor_count); if (sleep) return ((uint_t)id_alloc(minor_ids)); if ((id = id_alloc_nosleep(minor_ids)) == -1) { atomic_dec_32(&minor_count); return (0); } return ((uint_t)id); } /* * Release a previously allocated minor number. */ void mac_minor_rele(minor_t minor) { /* * Return the value to the arena. */ id_free(minor_ids, minor); atomic_dec_32(&minor_count); } uint32_t mac_no_notification(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; return (((mip->mi_state_flags & MIS_LEGACY) != 0) ? mip->mi_capab_legacy.ml_unsup_note : 0); } /* * Prevent any new opens of this mac in preparation for unregister */ int i_mac_disable(mac_impl_t *mip) { mac_client_impl_t *mcip; rw_enter(&i_mac_impl_lock, RW_WRITER); if (mip->mi_state_flags & MIS_DISABLED) { /* Already disabled, return success */ rw_exit(&i_mac_impl_lock); return (0); } /* * See if there are any other references to this mac_t (e.g., VLAN's). * If so return failure. If all the other checks below pass, then * set mi_disabled atomically under the i_mac_impl_lock to prevent * any new VLAN's from being created or new mac client opens of this * mac end point. */ if (mip->mi_ref > 0) { rw_exit(&i_mac_impl_lock); return (EBUSY); } /* * mac clients must delete all multicast groups they join before * closing. bcast groups are reference counted, the last client * to delete the group will wait till the group is physically * deleted. Since all clients have closed this mac end point * mi_bcast_ngrps must be zero at this point */ ASSERT(mip->mi_bcast_ngrps == 0); /* * Don't let go of this if it has some flows. * All other code guarantees no flows are added to a disabled * mac, therefore it is sufficient to check for the flow table * only here. */ mcip = mac_primary_client_handle(mip); if ((mcip != NULL) && mac_link_has_flows((mac_client_handle_t)mcip)) { rw_exit(&i_mac_impl_lock); return (ENOTEMPTY); } mip->mi_state_flags |= MIS_DISABLED; rw_exit(&i_mac_impl_lock); return (0); } int mac_disable_nowait(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; int err; if ((err = i_mac_perim_enter_nowait(mip)) != 0) return (err); err = i_mac_disable(mip); i_mac_perim_exit(mip); return (err); } int mac_disable(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; int err; i_mac_perim_enter(mip); err = i_mac_disable(mip); i_mac_perim_exit(mip); /* * Clean up notification thread and wait for it to exit. */ if (err == 0) i_mac_notify_exit(mip); return (err); } /* * Called when the MAC instance has a non empty flow table, to de-multiplex * incoming packets to the right flow. * The MAC's rw lock is assumed held as a READER. */ /* ARGSUSED */ static mblk_t * mac_rx_classify(mac_impl_t *mip, mac_resource_handle_t mrh, mblk_t *mp) { flow_entry_t *flent = NULL; uint_t flags = FLOW_INBOUND; int err; /* * If the mac is a port of an aggregation, pass FLOW_IGNORE_VLAN * to mac_flow_lookup() so that the VLAN packets can be successfully * passed to the non-VLAN aggregation flows. * * Note that there is possibly a race between this and * mac_unicast_remove/add() and VLAN packets could be incorrectly * classified to non-VLAN flows of non-aggregation mac clients. These * VLAN packets will be then filtered out by the mac module. */ if ((mip->mi_state_flags & MIS_EXCLUSIVE) != 0) flags |= FLOW_IGNORE_VLAN; err = mac_flow_lookup(mip->mi_flow_tab, mp, flags, &flent); if (err != 0) { /* no registered receive function */ return (mp); } else { mac_client_impl_t *mcip; /* * This flent might just be an additional one on the MAC client, * i.e. for classification purposes (different fdesc), however * the resources, SRS et. al., are in the mci_flent, so if * this isn't the mci_flent, we need to get it. */ if ((mcip = flent->fe_mcip) != NULL && mcip->mci_flent != flent) { FLOW_REFRELE(flent); flent = mcip->mci_flent; FLOW_TRY_REFHOLD(flent, err); if (err != 0) return (mp); } (flent->fe_cb_fn)(flent->fe_cb_arg1, flent->fe_cb_arg2, mp, B_FALSE); FLOW_REFRELE(flent); } return (NULL); } mblk_t * mac_rx_flow(mac_handle_t mh, mac_resource_handle_t mrh, mblk_t *mp_chain) { mac_impl_t *mip = (mac_impl_t *)mh; mblk_t *bp, *bp1, **bpp, *list = NULL; /* * We walk the chain and attempt to classify each packet. * The packets that couldn't be classified will be returned * back to the caller. */ bp = mp_chain; bpp = &list; while (bp != NULL) { bp1 = bp; bp = bp->b_next; bp1->b_next = NULL; if (mac_rx_classify(mip, mrh, bp1) != NULL) { *bpp = bp1; bpp = &bp1->b_next; } } return (list); } static int mac_tx_flow_srs_wakeup(flow_entry_t *flent, void *arg) { mac_ring_handle_t ring = arg; if (flent->fe_tx_srs) mac_tx_srs_wakeup(flent->fe_tx_srs, ring); return (0); } void i_mac_tx_srs_notify(mac_impl_t *mip, mac_ring_handle_t ring) { mac_client_impl_t *cclient; mac_soft_ring_set_t *mac_srs; /* * After grabbing the mi_rw_lock, the list of clients can't change. * If there are any clients mi_disabled must be B_FALSE and can't * get set since there are clients. If there aren't any clients we * don't do anything. In any case the mip has to be valid. The driver * must make sure that it goes single threaded (with respect to mac * calls) and wait for all pending mac calls to finish before calling * mac_unregister. */ rw_enter(&i_mac_impl_lock, RW_READER); if (mip->mi_state_flags & MIS_DISABLED) { rw_exit(&i_mac_impl_lock); return; } /* * Get MAC tx srs from walking mac_client_handle list. */ rw_enter(&mip->mi_rw_lock, RW_READER); for (cclient = mip->mi_clients_list; cclient != NULL; cclient = cclient->mci_client_next) { if ((mac_srs = MCIP_TX_SRS(cclient)) != NULL) { mac_tx_srs_wakeup(mac_srs, ring); } else { /* * Aggr opens underlying ports in exclusive mode * and registers flow control callbacks using * mac_tx_client_notify(). When opened in * exclusive mode, Tx SRS won't be created * during mac_unicast_add(). */ if (cclient->mci_state_flags & MCIS_EXCLUSIVE) { mac_tx_invoke_callbacks(cclient, (mac_tx_cookie_t)ring); } } (void) mac_flow_walk(cclient->mci_subflow_tab, mac_tx_flow_srs_wakeup, ring); } rw_exit(&mip->mi_rw_lock); rw_exit(&i_mac_impl_lock); } /* ARGSUSED */ void mac_multicast_refresh(mac_handle_t mh, mac_multicst_t refresh, void *arg, boolean_t add) { mac_impl_t *mip = (mac_impl_t *)mh; i_mac_perim_enter((mac_impl_t *)mh); /* * If no specific refresh function was given then default to the * driver's m_multicst entry point. */ if (refresh == NULL) { refresh = mip->mi_multicst; arg = mip->mi_driver; } mac_bcast_refresh(mip, refresh, arg, add); i_mac_perim_exit((mac_impl_t *)mh); } void mac_promisc_refresh(mac_handle_t mh, mac_setpromisc_t refresh, void *arg) { mac_impl_t *mip = (mac_impl_t *)mh; /* * If no specific refresh function was given then default to the * driver's m_promisc entry point. */ if (refresh == NULL) { refresh = mip->mi_setpromisc; arg = mip->mi_driver; } ASSERT(refresh != NULL); /* * Call the refresh function with the current promiscuity. */ refresh(arg, (mip->mi_devpromisc != 0)); } /* * The mac client requests that the mac not to change its margin size to * be less than the specified value. If "current" is B_TRUE, then the client * requests the mac not to change its margin size to be smaller than the * current size. Further, return the current margin size value in this case. * * We keep every requested size in an ordered list from largest to smallest. */ int mac_margin_add(mac_handle_t mh, uint32_t *marginp, boolean_t current) { mac_impl_t *mip = (mac_impl_t *)mh; mac_margin_req_t **pp, *p; int err = 0; rw_enter(&(mip->mi_rw_lock), RW_WRITER); if (current) *marginp = mip->mi_margin; /* * If the current margin value cannot satisfy the margin requested, * return ENOTSUP directly. */ if (*marginp > mip->mi_margin) { err = ENOTSUP; goto done; } /* * Check whether the given margin is already in the list. If so, * bump the reference count. */ for (pp = &mip->mi_mmrp; (p = *pp) != NULL; pp = &p->mmr_nextp) { if (p->mmr_margin == *marginp) { /* * The margin requested is already in the list, * so just bump the reference count. */ p->mmr_ref++; goto done; } if (p->mmr_margin < *marginp) break; } p = kmem_zalloc(sizeof (mac_margin_req_t), KM_SLEEP); p->mmr_margin = *marginp; p->mmr_ref++; p->mmr_nextp = *pp; *pp = p; done: rw_exit(&(mip->mi_rw_lock)); return (err); } /* * The mac client requests to cancel its previous mac_margin_add() request. * We remove the requested margin size from the list. */ int mac_margin_remove(mac_handle_t mh, uint32_t margin) { mac_impl_t *mip = (mac_impl_t *)mh; mac_margin_req_t **pp, *p; int err = 0; rw_enter(&(mip->mi_rw_lock), RW_WRITER); /* * Find the entry in the list for the given margin. */ for (pp = &(mip->mi_mmrp); (p = *pp) != NULL; pp = &(p->mmr_nextp)) { if (p->mmr_margin == margin) { if (--p->mmr_ref == 0) break; /* * There is still a reference to this address so * there's nothing more to do. */ goto done; } } /* * We did not find an entry for the given margin. */ if (p == NULL) { err = ENOENT; goto done; } ASSERT(p->mmr_ref == 0); /* * Remove it from the list. */ *pp = p->mmr_nextp; kmem_free(p, sizeof (mac_margin_req_t)); done: rw_exit(&(mip->mi_rw_lock)); return (err); } boolean_t mac_margin_update(mac_handle_t mh, uint32_t margin) { mac_impl_t *mip = (mac_impl_t *)mh; uint32_t margin_needed = 0; rw_enter(&(mip->mi_rw_lock), RW_WRITER); if (mip->mi_mmrp != NULL) margin_needed = mip->mi_mmrp->mmr_margin; if (margin_needed <= margin) mip->mi_margin = margin; rw_exit(&(mip->mi_rw_lock)); if (margin_needed <= margin) i_mac_notify(mip, MAC_NOTE_MARGIN); return (margin_needed <= margin); } /* * MAC clients use this interface to request that a MAC device not change its * MTU below the specified amount. At this time, that amount must be within the * range of the device's current minimum and the device's current maximum. eg. a * client cannot request a 3000 byte MTU when the device's MTU is currently * 2000. * * If "current" is set to B_TRUE, then the request is to simply to reserve the * current underlying mac's maximum for this mac client and return it in mtup. */ int mac_mtu_add(mac_handle_t mh, uint32_t *mtup, boolean_t current) { mac_impl_t *mip = (mac_impl_t *)mh; mac_mtu_req_t *prev, *cur; mac_propval_range_t mpr; int err; i_mac_perim_enter(mip); rw_enter(&mip->mi_rw_lock, RW_WRITER); if (current == B_TRUE) *mtup = mip->mi_sdu_max; mpr.mpr_count = 1; err = mac_prop_info(mh, MAC_PROP_MTU, "mtu", NULL, 0, &mpr, NULL); if (err != 0) { rw_exit(&mip->mi_rw_lock); i_mac_perim_exit(mip); return (err); } if (*mtup > mip->mi_sdu_max || *mtup < mpr.mpr_range_uint32[0].mpur_min) { rw_exit(&mip->mi_rw_lock); i_mac_perim_exit(mip); return (ENOTSUP); } prev = NULL; for (cur = mip->mi_mtrp; cur != NULL; cur = cur->mtr_nextp) { if (*mtup == cur->mtr_mtu) { cur->mtr_ref++; rw_exit(&mip->mi_rw_lock); i_mac_perim_exit(mip); return (0); } if (*mtup > cur->mtr_mtu) break; prev = cur; } cur = kmem_alloc(sizeof (mac_mtu_req_t), KM_SLEEP); cur->mtr_mtu = *mtup; cur->mtr_ref = 1; if (prev != NULL) { cur->mtr_nextp = prev->mtr_nextp; prev->mtr_nextp = cur; } else { cur->mtr_nextp = mip->mi_mtrp; mip->mi_mtrp = cur; } rw_exit(&mip->mi_rw_lock); i_mac_perim_exit(mip); return (0); } int mac_mtu_remove(mac_handle_t mh, uint32_t mtu) { mac_impl_t *mip = (mac_impl_t *)mh; mac_mtu_req_t *cur, *prev; i_mac_perim_enter(mip); rw_enter(&mip->mi_rw_lock, RW_WRITER); prev = NULL; for (cur = mip->mi_mtrp; cur != NULL; cur = cur->mtr_nextp) { if (cur->mtr_mtu == mtu) { ASSERT(cur->mtr_ref > 0); cur->mtr_ref--; if (cur->mtr_ref == 0) { if (prev == NULL) { mip->mi_mtrp = cur->mtr_nextp; } else { prev->mtr_nextp = cur->mtr_nextp; } kmem_free(cur, sizeof (mac_mtu_req_t)); } rw_exit(&mip->mi_rw_lock); i_mac_perim_exit(mip); return (0); } prev = cur; } rw_exit(&mip->mi_rw_lock); i_mac_perim_exit(mip); return (ENOENT); } /* * MAC Type Plugin functions. */ mactype_t * mactype_getplugin(const char *pname) { mactype_t *mtype = NULL; boolean_t tried_modload = B_FALSE; mutex_enter(&i_mactype_lock); find_registered_mactype: if (mod_hash_find(i_mactype_hash, (mod_hash_key_t)pname, (mod_hash_val_t *)&mtype) != 0) { if (!tried_modload) { /* * If the plugin has not yet been loaded, then * attempt to load it now. If modload() succeeds, * the plugin should have registered using * mactype_register(), in which case we can go back * and attempt to find it again. */ if (modload(MACTYPE_KMODDIR, (char *)pname) != -1) { tried_modload = B_TRUE; goto find_registered_mactype; } } } else { /* * Note that there's no danger that the plugin we've loaded * could be unloaded between the modload() step and the * reference count bump here, as we're holding * i_mactype_lock, which mactype_unregister() also holds. */ atomic_inc_32(&mtype->mt_ref); } mutex_exit(&i_mactype_lock); return (mtype); } mactype_register_t * mactype_alloc(uint_t mactype_version) { mactype_register_t *mtrp; /* * Make sure there isn't a version mismatch between the plugin and * the framework. In the future, if multiple versions are * supported, this check could become more sophisticated. */ if (mactype_version != MACTYPE_VERSION) return (NULL); mtrp = kmem_zalloc(sizeof (mactype_register_t), KM_SLEEP); mtrp->mtr_version = mactype_version; return (mtrp); } void mactype_free(mactype_register_t *mtrp) { kmem_free(mtrp, sizeof (mactype_register_t)); } int mactype_register(mactype_register_t *mtrp) { mactype_t *mtp; mactype_ops_t *ops = mtrp->mtr_ops; /* Do some sanity checking before we register this MAC type. */ if (mtrp->mtr_ident == NULL || ops == NULL) return (EINVAL); /* * Verify that all mandatory callbacks are set in the ops * vector. */ if (ops->mtops_unicst_verify == NULL || ops->mtops_multicst_verify == NULL || ops->mtops_sap_verify == NULL || ops->mtops_header == NULL || ops->mtops_header_info == NULL) { return (EINVAL); } mtp = kmem_zalloc(sizeof (*mtp), KM_SLEEP); mtp->mt_ident = mtrp->mtr_ident; mtp->mt_ops = *ops; mtp->mt_type = mtrp->mtr_mactype; mtp->mt_nativetype = mtrp->mtr_nativetype; mtp->mt_addr_length = mtrp->mtr_addrlen; if (mtrp->mtr_brdcst_addr != NULL) { mtp->mt_brdcst_addr = kmem_alloc(mtrp->mtr_addrlen, KM_SLEEP); bcopy(mtrp->mtr_brdcst_addr, mtp->mt_brdcst_addr, mtrp->mtr_addrlen); } mtp->mt_stats = mtrp->mtr_stats; mtp->mt_statcount = mtrp->mtr_statcount; mtp->mt_mapping = mtrp->mtr_mapping; mtp->mt_mappingcount = mtrp->mtr_mappingcount; if (mod_hash_insert(i_mactype_hash, (mod_hash_key_t)mtp->mt_ident, (mod_hash_val_t)mtp) != 0) { kmem_free(mtp->mt_brdcst_addr, mtp->mt_addr_length); kmem_free(mtp, sizeof (*mtp)); return (EEXIST); } return (0); } int mactype_unregister(const char *ident) { mactype_t *mtp; mod_hash_val_t val; int err; /* * Let's not allow MAC drivers to use this plugin while we're * trying to unregister it. Holding i_mactype_lock also prevents a * plugin from unregistering while a MAC driver is attempting to * hold a reference to it in i_mactype_getplugin(). */ mutex_enter(&i_mactype_lock); if ((err = mod_hash_find(i_mactype_hash, (mod_hash_key_t)ident, (mod_hash_val_t *)&mtp)) != 0) { /* A plugin is trying to unregister, but it never registered. */ err = ENXIO; goto done; } if (mtp->mt_ref != 0) { err = EBUSY; goto done; } err = mod_hash_remove(i_mactype_hash, (mod_hash_key_t)ident, &val); ASSERT(err == 0); if (err != 0) { /* This should never happen, thus the ASSERT() above. */ err = EINVAL; goto done; } ASSERT(mtp == (mactype_t *)val); if (mtp->mt_brdcst_addr != NULL) kmem_free(mtp->mt_brdcst_addr, mtp->mt_addr_length); kmem_free(mtp, sizeof (mactype_t)); done: mutex_exit(&i_mactype_lock); return (err); } /* * Checks the size of the value size specified for a property as * part of a property operation. Returns B_TRUE if the size is * correct, B_FALSE otherwise. */ boolean_t mac_prop_check_size(mac_prop_id_t id, uint_t valsize, boolean_t is_range) { uint_t minsize = 0; if (is_range) return (valsize >= sizeof (mac_propval_range_t)); switch (id) { case MAC_PROP_ZONE: minsize = sizeof (dld_ioc_zid_t); break; case MAC_PROP_AUTOPUSH: if (valsize != 0) minsize = sizeof (struct dlautopush); break; case MAC_PROP_TAGMODE: minsize = sizeof (link_tagmode_t); break; case MAC_PROP_RESOURCE: case MAC_PROP_RESOURCE_EFF: minsize = sizeof (mac_resource_props_t); break; case MAC_PROP_DUPLEX: minsize = sizeof (link_duplex_t); break; case MAC_PROP_SPEED: minsize = sizeof (uint64_t); break; case MAC_PROP_STATUS: minsize = sizeof (link_state_t); break; case MAC_PROP_AUTONEG: case MAC_PROP_EN_AUTONEG: minsize = sizeof (uint8_t); break; case MAC_PROP_MTU: case MAC_PROP_LLIMIT: case MAC_PROP_LDECAY: minsize = sizeof (uint32_t); break; case MAC_PROP_FLOWCTRL: minsize = sizeof (link_flowctrl_t); break; case MAC_PROP_ADV_5000FDX_CAP: case MAC_PROP_EN_5000FDX_CAP: case MAC_PROP_ADV_2500FDX_CAP: case MAC_PROP_EN_2500FDX_CAP: case MAC_PROP_ADV_100GFDX_CAP: case MAC_PROP_EN_100GFDX_CAP: case MAC_PROP_ADV_50GFDX_CAP: case MAC_PROP_EN_50GFDX_CAP: case MAC_PROP_ADV_40GFDX_CAP: case MAC_PROP_EN_40GFDX_CAP: case MAC_PROP_ADV_25GFDX_CAP: case MAC_PROP_EN_25GFDX_CAP: case MAC_PROP_ADV_10GFDX_CAP: case MAC_PROP_EN_10GFDX_CAP: case MAC_PROP_ADV_1000HDX_CAP: case MAC_PROP_EN_1000HDX_CAP: case MAC_PROP_ADV_100FDX_CAP: case MAC_PROP_EN_100FDX_CAP: case MAC_PROP_ADV_100HDX_CAP: case MAC_PROP_EN_100HDX_CAP: case MAC_PROP_ADV_10FDX_CAP: case MAC_PROP_EN_10FDX_CAP: case MAC_PROP_ADV_10HDX_CAP: case MAC_PROP_EN_10HDX_CAP: case MAC_PROP_ADV_100T4_CAP: case MAC_PROP_EN_100T4_CAP: minsize = sizeof (uint8_t); break; case MAC_PROP_PVID: minsize = sizeof (uint16_t); break; case MAC_PROP_IPTUN_HOPLIMIT: minsize = sizeof (uint32_t); break; case MAC_PROP_IPTUN_ENCAPLIMIT: minsize = sizeof (uint32_t); break; case MAC_PROP_MAX_TX_RINGS_AVAIL: case MAC_PROP_MAX_RX_RINGS_AVAIL: case MAC_PROP_MAX_RXHWCLNT_AVAIL: case MAC_PROP_MAX_TXHWCLNT_AVAIL: minsize = sizeof (uint_t); break; case MAC_PROP_WL_ESSID: minsize = sizeof (wl_linkstatus_t); break; case MAC_PROP_WL_BSSID: minsize = sizeof (wl_bssid_t); break; case MAC_PROP_WL_BSSTYPE: minsize = sizeof (wl_bss_type_t); break; case MAC_PROP_WL_LINKSTATUS: minsize = sizeof (wl_linkstatus_t); break; case MAC_PROP_WL_DESIRED_RATES: minsize = sizeof (wl_rates_t); break; case MAC_PROP_WL_SUPPORTED_RATES: minsize = sizeof (wl_rates_t); break; case MAC_PROP_WL_AUTH_MODE: minsize = sizeof (wl_authmode_t); break; case MAC_PROP_WL_ENCRYPTION: minsize = sizeof (wl_encryption_t); break; case MAC_PROP_WL_RSSI: minsize = sizeof (wl_rssi_t); break; case MAC_PROP_WL_PHY_CONFIG: minsize = sizeof (wl_phy_conf_t); break; case MAC_PROP_WL_CAPABILITY: minsize = sizeof (wl_capability_t); break; case MAC_PROP_WL_WPA: minsize = sizeof (wl_wpa_t); break; case MAC_PROP_WL_SCANRESULTS: minsize = sizeof (wl_wpa_ess_t); break; case MAC_PROP_WL_POWER_MODE: minsize = sizeof (wl_ps_mode_t); break; case MAC_PROP_WL_RADIO: minsize = sizeof (wl_radio_t); break; case MAC_PROP_WL_ESS_LIST: minsize = sizeof (wl_ess_list_t); break; case MAC_PROP_WL_KEY_TAB: minsize = sizeof (wl_wep_key_tab_t); break; case MAC_PROP_WL_CREATE_IBSS: minsize = sizeof (wl_create_ibss_t); break; case MAC_PROP_WL_SETOPTIE: minsize = sizeof (wl_wpa_ie_t); break; case MAC_PROP_WL_DELKEY: minsize = sizeof (wl_del_key_t); break; case MAC_PROP_WL_KEY: minsize = sizeof (wl_key_t); break; case MAC_PROP_WL_MLME: minsize = sizeof (wl_mlme_t); break; case MAC_PROP_VN_PROMISC_FILTERED: minsize = sizeof (boolean_t); break; } return (valsize >= minsize); } /* * mac_set_prop() sets MAC or hardware driver properties: * * - MAC-managed properties such as resource properties include maxbw, * priority, and cpu binding list, as well as the default port VID * used by bridging. These properties are consumed by the MAC layer * itself and not passed down to the driver. For resource control * properties, this function invokes mac_set_resources() which will * cache the property value in mac_impl_t and may call * mac_client_set_resource() to update property value of the primary * mac client, if it exists. * * - Properties which act on the hardware and must be passed to the * driver, such as MTU, through the driver's mc_setprop() entry point. */ int mac_set_prop(mac_handle_t mh, mac_prop_id_t id, char *name, void *val, uint_t valsize) { int err = ENOTSUP; mac_impl_t *mip = (mac_impl_t *)mh; ASSERT(MAC_PERIM_HELD(mh)); switch (id) { case MAC_PROP_RESOURCE: { mac_resource_props_t *mrp; /* call mac_set_resources() for MAC properties */ ASSERT(valsize >= sizeof (mac_resource_props_t)); mrp = kmem_zalloc(sizeof (*mrp), KM_SLEEP); bcopy(val, mrp, sizeof (*mrp)); err = mac_set_resources(mh, mrp); kmem_free(mrp, sizeof (*mrp)); break; } case MAC_PROP_PVID: ASSERT(valsize >= sizeof (uint16_t)); if (mip->mi_state_flags & MIS_IS_VNIC) return (EINVAL); err = mac_set_pvid(mh, *(uint16_t *)val); break; case MAC_PROP_MTU: { uint32_t mtu; ASSERT(valsize >= sizeof (uint32_t)); bcopy(val, &mtu, sizeof (mtu)); err = mac_set_mtu(mh, mtu, NULL); break; } case MAC_PROP_LLIMIT: case MAC_PROP_LDECAY: { uint32_t learnval; if (valsize < sizeof (learnval) || (mip->mi_state_flags & MIS_IS_VNIC)) return (EINVAL); bcopy(val, &learnval, sizeof (learnval)); if (learnval == 0 && id == MAC_PROP_LDECAY) return (EINVAL); if (id == MAC_PROP_LLIMIT) mip->mi_llimit = learnval; else mip->mi_ldecay = learnval; err = 0; break; } default: /* For other driver properties, call driver's callback */ if (mip->mi_callbacks->mc_callbacks & MC_SETPROP) { err = mip->mi_callbacks->mc_setprop(mip->mi_driver, name, id, valsize, val); } } return (err); } /* * mac_get_prop() gets MAC or device driver properties. * * If the property is a driver property, mac_get_prop() calls driver's callback * entry point to get it. * If the property is a MAC property, mac_get_prop() invokes mac_get_resources() * which returns the cached value in mac_impl_t. */ int mac_get_prop(mac_handle_t mh, mac_prop_id_t id, char *name, void *val, uint_t valsize) { int err = ENOTSUP; mac_impl_t *mip = (mac_impl_t *)mh; uint_t rings; uint_t vlinks; bzero(val, valsize); switch (id) { case MAC_PROP_RESOURCE: { mac_resource_props_t *mrp; /* If mac property, read from cache */ ASSERT(valsize >= sizeof (mac_resource_props_t)); mrp = kmem_zalloc(sizeof (*mrp), KM_SLEEP); mac_get_resources(mh, mrp); bcopy(mrp, val, sizeof (*mrp)); kmem_free(mrp, sizeof (*mrp)); return (0); } case MAC_PROP_RESOURCE_EFF: { mac_resource_props_t *mrp; /* If mac effective property, read from client */ ASSERT(valsize >= sizeof (mac_resource_props_t)); mrp = kmem_zalloc(sizeof (*mrp), KM_SLEEP); mac_get_effective_resources(mh, mrp); bcopy(mrp, val, sizeof (*mrp)); kmem_free(mrp, sizeof (*mrp)); return (0); } case MAC_PROP_PVID: ASSERT(valsize >= sizeof (uint16_t)); if (mip->mi_state_flags & MIS_IS_VNIC) return (EINVAL); *(uint16_t *)val = mac_get_pvid(mh); return (0); case MAC_PROP_LLIMIT: case MAC_PROP_LDECAY: ASSERT(valsize >= sizeof (uint32_t)); if (mip->mi_state_flags & MIS_IS_VNIC) return (EINVAL); if (id == MAC_PROP_LLIMIT) bcopy(&mip->mi_llimit, val, sizeof (mip->mi_llimit)); else bcopy(&mip->mi_ldecay, val, sizeof (mip->mi_ldecay)); return (0); case MAC_PROP_MTU: { uint32_t sdu; ASSERT(valsize >= sizeof (uint32_t)); mac_sdu_get2(mh, NULL, &sdu, NULL); bcopy(&sdu, val, sizeof (sdu)); return (0); } case MAC_PROP_STATUS: { link_state_t link_state; if (valsize < sizeof (link_state)) return (EINVAL); link_state = mac_link_get(mh); bcopy(&link_state, val, sizeof (link_state)); return (0); } case MAC_PROP_MAX_RX_RINGS_AVAIL: case MAC_PROP_MAX_TX_RINGS_AVAIL: ASSERT(valsize >= sizeof (uint_t)); rings = id == MAC_PROP_MAX_RX_RINGS_AVAIL ? mac_rxavail_get(mh) : mac_txavail_get(mh); bcopy(&rings, val, sizeof (uint_t)); return (0); case MAC_PROP_MAX_RXHWCLNT_AVAIL: case MAC_PROP_MAX_TXHWCLNT_AVAIL: ASSERT(valsize >= sizeof (uint_t)); vlinks = id == MAC_PROP_MAX_RXHWCLNT_AVAIL ? mac_rxhwlnksavail_get(mh) : mac_txhwlnksavail_get(mh); bcopy(&vlinks, val, sizeof (uint_t)); return (0); case MAC_PROP_RXRINGSRANGE: case MAC_PROP_TXRINGSRANGE: /* * The value for these properties are returned through * the MAC_PROP_RESOURCE property. */ return (0); default: break; } /* If driver property, request from driver */ if (mip->mi_callbacks->mc_callbacks & MC_GETPROP) { err = mip->mi_callbacks->mc_getprop(mip->mi_driver, name, id, valsize, val); } return (err); } /* * Helper function to initialize the range structure for use in * mac_get_prop. If the type can be other than uint32, we can * pass that as an arg. */ static void _mac_set_range(mac_propval_range_t *range, uint32_t min, uint32_t max) { range->mpr_count = 1; range->mpr_type = MAC_PROPVAL_UINT32; range->mpr_range_uint32[0].mpur_min = min; range->mpr_range_uint32[0].mpur_max = max; } /* * Returns information about the specified property, such as default * values or permissions. */ int mac_prop_info(mac_handle_t mh, mac_prop_id_t id, char *name, void *default_val, uint_t default_size, mac_propval_range_t *range, uint_t *perm) { mac_prop_info_state_t state; mac_impl_t *mip = (mac_impl_t *)mh; uint_t max; /* * A property is read/write by default unless the driver says * otherwise. */ if (perm != NULL) *perm = MAC_PROP_PERM_RW; if (default_val != NULL) bzero(default_val, default_size); /* * First, handle framework properties for which we don't need to * involve the driver. */ switch (id) { case MAC_PROP_RESOURCE: case MAC_PROP_PVID: case MAC_PROP_LLIMIT: case MAC_PROP_LDECAY: return (0); case MAC_PROP_MAX_RX_RINGS_AVAIL: case MAC_PROP_MAX_TX_RINGS_AVAIL: case MAC_PROP_MAX_RXHWCLNT_AVAIL: case MAC_PROP_MAX_TXHWCLNT_AVAIL: if (perm != NULL) *perm = MAC_PROP_PERM_READ; return (0); case MAC_PROP_RXRINGSRANGE: case MAC_PROP_TXRINGSRANGE: /* * Currently, we support range for RX and TX rings properties. * When we extend this support to maxbw, cpus and priority, * we should move this to mac_get_resources. * There is no default value for RX or TX rings. */ if ((mip->mi_state_flags & MIS_IS_VNIC) && mac_is_vnic_primary(mh)) { /* * We don't support setting rings for a VLAN * data link because it shares its ring with the * primary MAC client. */ if (perm != NULL) *perm = MAC_PROP_PERM_READ; if (range != NULL) range->mpr_count = 0; } else if (range != NULL) { if (mip->mi_state_flags & MIS_IS_VNIC) mh = mac_get_lower_mac_handle(mh); mip = (mac_impl_t *)mh; if ((id == MAC_PROP_RXRINGSRANGE && mip->mi_rx_group_type == MAC_GROUP_TYPE_STATIC) || (id == MAC_PROP_TXRINGSRANGE && mip->mi_tx_group_type == MAC_GROUP_TYPE_STATIC)) { if (id == MAC_PROP_RXRINGSRANGE) { if ((mac_rxhwlnksavail_get(mh) + mac_rxhwlnksrsvd_get(mh)) <= 1) { /* * doesn't support groups or * rings */ range->mpr_count = 0; } else { /* * supports specifying groups, * but not rings */ _mac_set_range(range, 0, 0); } } else { if ((mac_txhwlnksavail_get(mh) + mac_txhwlnksrsvd_get(mh)) <= 1) { /* * doesn't support groups or * rings */ range->mpr_count = 0; } else { /* * supports specifying groups, * but not rings */ _mac_set_range(range, 0, 0); } } } else { max = id == MAC_PROP_RXRINGSRANGE ? mac_rxavail_get(mh) + mac_rxrsvd_get(mh) : mac_txavail_get(mh) + mac_txrsvd_get(mh); if (max <= 1) { /* * doesn't support groups or * rings */ range->mpr_count = 0; } else { /* * -1 because we have to leave out the * default ring. */ _mac_set_range(range, 1, max - 1); } } } return (0); case MAC_PROP_STATUS: if (perm != NULL) *perm = MAC_PROP_PERM_READ; return (0); } /* * Get the property info from the driver if it implements the * property info entry point. */ bzero(&state, sizeof (state)); if (mip->mi_callbacks->mc_callbacks & MC_PROPINFO) { state.pr_default = default_val; state.pr_default_size = default_size; /* * The caller specifies the maximum number of ranges * it can accomodate using mpr_count. We don't touch * this value until the driver returns from its * mc_propinfo() callback, and ensure we don't exceed * this number of range as the driver defines * supported range from its mc_propinfo(). * * pr_range_cur_count keeps track of how many ranges * were defined by the driver from its mc_propinfo() * entry point. * * On exit, the user-specified range mpr_count returns * the number of ranges specified by the driver on * success, or the number of ranges it wanted to * define if that number of ranges could not be * accomodated by the specified range structure. In * the latter case, the caller will be able to * allocate a larger range structure, and query the * property again. */ state.pr_range_cur_count = 0; state.pr_range = range; mip->mi_callbacks->mc_propinfo(mip->mi_driver, name, id, (mac_prop_info_handle_t)&state); if (state.pr_flags & MAC_PROP_INFO_RANGE) range->mpr_count = state.pr_range_cur_count; /* * The operation could fail if the buffer supplied by * the user was too small for the range or default * value of the property. */ if (state.pr_errno != 0) return (state.pr_errno); if (perm != NULL && state.pr_flags & MAC_PROP_INFO_PERM) *perm = state.pr_perm; } /* * The MAC layer may want to provide default values or allowed * ranges for properties if the driver does not provide a * property info entry point, or that entry point exists, but * it did not provide a default value or allowed ranges for * that property. */ switch (id) { case MAC_PROP_MTU: { uint32_t sdu; mac_sdu_get2(mh, NULL, &sdu, NULL); if (range != NULL && !(state.pr_flags & MAC_PROP_INFO_RANGE)) { /* MTU range */ _mac_set_range(range, sdu, sdu); } if (default_val != NULL && !(state.pr_flags & MAC_PROP_INFO_DEFAULT)) { if (mip->mi_info.mi_media == DL_ETHER) sdu = ETHERMTU; /* default MTU value */ bcopy(&sdu, default_val, sizeof (sdu)); } } } return (0); } int mac_fastpath_disable(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; if ((mip->mi_state_flags & MIS_LEGACY) == 0) return (0); return (mip->mi_capab_legacy.ml_fastpath_disable(mip->mi_driver)); } void mac_fastpath_enable(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; if ((mip->mi_state_flags & MIS_LEGACY) == 0) return; mip->mi_capab_legacy.ml_fastpath_enable(mip->mi_driver); } void mac_register_priv_prop(mac_impl_t *mip, char **priv_props) { uint_t nprops, i; if (priv_props == NULL) return; nprops = 0; while (priv_props[nprops] != NULL) nprops++; if (nprops == 0) return; mip->mi_priv_prop = kmem_zalloc(nprops * sizeof (char *), KM_SLEEP); for (i = 0; i < nprops; i++) { mip->mi_priv_prop[i] = kmem_zalloc(MAXLINKPROPNAME, KM_SLEEP); (void) strlcpy(mip->mi_priv_prop[i], priv_props[i], MAXLINKPROPNAME); } mip->mi_priv_prop_count = nprops; } void mac_unregister_priv_prop(mac_impl_t *mip) { uint_t i; if (mip->mi_priv_prop_count == 0) { ASSERT(mip->mi_priv_prop == NULL); return; } for (i = 0; i < mip->mi_priv_prop_count; i++) kmem_free(mip->mi_priv_prop[i], MAXLINKPROPNAME); kmem_free(mip->mi_priv_prop, mip->mi_priv_prop_count * sizeof (char *)); mip->mi_priv_prop = NULL; mip->mi_priv_prop_count = 0; } /* * mac_ring_t 'mr' macros. Some rogue drivers may access ring structure * (by invoking mac_rx()) even after processing mac_stop_ring(). In such * cases if MAC free's the ring structure after mac_stop_ring(), any * illegal access to the ring structure coming from the driver will panic * the system. In order to protect the system from such inadverent access, * we maintain a cache of rings in the mac_impl_t after they get free'd up. * When packets are received on free'd up rings, MAC (through the generation * count mechanism) will drop such packets. */ static mac_ring_t * mac_ring_alloc(mac_impl_t *mip) { mac_ring_t *ring; mutex_enter(&mip->mi_ring_lock); if (mip->mi_ring_freelist != NULL) { ring = mip->mi_ring_freelist; mip->mi_ring_freelist = ring->mr_next; bzero(ring, sizeof (mac_ring_t)); mutex_exit(&mip->mi_ring_lock); } else { mutex_exit(&mip->mi_ring_lock); ring = kmem_cache_alloc(mac_ring_cache, KM_SLEEP); } ASSERT((ring != NULL) && (ring->mr_state == MR_FREE)); return (ring); } static void mac_ring_free(mac_impl_t *mip, mac_ring_t *ring) { ASSERT(ring->mr_state == MR_FREE); mutex_enter(&mip->mi_ring_lock); ring->mr_state = MR_FREE; ring->mr_flag = 0; ring->mr_next = mip->mi_ring_freelist; ring->mr_mip = NULL; mip->mi_ring_freelist = ring; mac_ring_stat_delete(ring); mutex_exit(&mip->mi_ring_lock); } static void mac_ring_freeall(mac_impl_t *mip) { mac_ring_t *ring_next; mutex_enter(&mip->mi_ring_lock); mac_ring_t *ring = mip->mi_ring_freelist; while (ring != NULL) { ring_next = ring->mr_next; kmem_cache_free(mac_ring_cache, ring); ring = ring_next; } mip->mi_ring_freelist = NULL; mutex_exit(&mip->mi_ring_lock); } int mac_start_ring(mac_ring_t *ring) { int rv = 0; ASSERT(ring->mr_state == MR_FREE); if (ring->mr_start != NULL) { rv = ring->mr_start(ring->mr_driver, ring->mr_gen_num); if (rv != 0) return (rv); } ring->mr_state = MR_INUSE; return (rv); } void mac_stop_ring(mac_ring_t *ring) { ASSERT(ring->mr_state == MR_INUSE); if (ring->mr_stop != NULL) ring->mr_stop(ring->mr_driver); ring->mr_state = MR_FREE; /* * Increment the ring generation number for this ring. */ ring->mr_gen_num++; } int mac_start_group(mac_group_t *group) { int rv = 0; if (group->mrg_start != NULL) rv = group->mrg_start(group->mrg_driver); return (rv); } void mac_stop_group(mac_group_t *group) { if (group->mrg_stop != NULL) group->mrg_stop(group->mrg_driver); } /* * Called from mac_start() on the default Rx group. Broadcast and multicast * packets are received only on the default group. Hence the default group * needs to be up even if the primary client is not up, for the other groups * to be functional. We do this by calling this function at mac_start time * itself. However the broadcast packets that are received can't make their * way beyond mac_rx until a mac client creates a broadcast flow. */ static int mac_start_group_and_rings(mac_group_t *group) { mac_ring_t *ring; int rv = 0; ASSERT(group->mrg_state == MAC_GROUP_STATE_REGISTERED); if ((rv = mac_start_group(group)) != 0) return (rv); for (ring = group->mrg_rings; ring != NULL; ring = ring->mr_next) { ASSERT(ring->mr_state == MR_FREE); if ((rv = mac_start_ring(ring)) != 0) goto error; ring->mr_classify_type = MAC_SW_CLASSIFIER; } return (0); error: mac_stop_group_and_rings(group); return (rv); } /* Called from mac_stop on the default Rx group */ static void mac_stop_group_and_rings(mac_group_t *group) { mac_ring_t *ring; for (ring = group->mrg_rings; ring != NULL; ring = ring->mr_next) { if (ring->mr_state != MR_FREE) { mac_stop_ring(ring); ring->mr_flag = 0; ring->mr_classify_type = MAC_NO_CLASSIFIER; } } mac_stop_group(group); } static mac_ring_t * mac_init_ring(mac_impl_t *mip, mac_group_t *group, int index, mac_capab_rings_t *cap_rings) { mac_ring_t *ring, *rnext; mac_ring_info_t ring_info; ddi_intr_handle_t ddi_handle; ring = mac_ring_alloc(mip); /* Prepare basic information of ring */ /* * Ring index is numbered to be unique across a particular device. * Ring index computation makes following assumptions: * - For drivers with static grouping (e.g. ixgbe, bge), * ring index exchanged with the driver (e.g. during mr_rget) * is unique only across the group the ring belongs to. * - Drivers with dynamic grouping (e.g. nxge), start * with single group (mrg_index = 0). */ ring->mr_index = group->mrg_index * group->mrg_info.mgi_count + index; ring->mr_type = group->mrg_type; ring->mr_gh = (mac_group_handle_t)group; /* Insert the new ring to the list. */ ring->mr_next = group->mrg_rings; group->mrg_rings = ring; /* Zero to reuse the info data structure */ bzero(&ring_info, sizeof (ring_info)); /* Query ring information from driver */ cap_rings->mr_rget(mip->mi_driver, group->mrg_type, group->mrg_index, index, &ring_info, (mac_ring_handle_t)ring); ring->mr_info = ring_info; /* * The interrupt handle could be shared among multiple rings. * Thus if there is a bunch of rings that are sharing an * interrupt, then only one ring among the bunch will be made * available for interrupt re-targeting; the rest will have * ddi_shared flag set to TRUE and would not be available for * be interrupt re-targeting. */ if ((ddi_handle = ring_info.mri_intr.mi_ddi_handle) != NULL) { rnext = ring->mr_next; while (rnext != NULL) { if (rnext->mr_info.mri_intr.mi_ddi_handle == ddi_handle) { /* * If default ring (mr_index == 0) is part * of a group of rings sharing an * interrupt, then set ddi_shared flag for * the default ring and give another ring * the chance to be re-targeted. */ if (rnext->mr_index == 0 && !rnext->mr_info.mri_intr.mi_ddi_shared) { rnext->mr_info.mri_intr.mi_ddi_shared = B_TRUE; } else { ring->mr_info.mri_intr.mi_ddi_shared = B_TRUE; } break; } rnext = rnext->mr_next; } /* * If rnext is NULL, then no matching ddi_handle was found. * Rx rings get registered first. So if this is a Tx ring, * then go through all the Rx rings and see if there is a * matching ddi handle. */ if (rnext == NULL && ring->mr_type == MAC_RING_TYPE_TX) { mac_compare_ddi_handle(mip->mi_rx_groups, mip->mi_rx_group_count, ring); } } /* Update ring's status */ ring->mr_state = MR_FREE; ring->mr_flag = 0; /* Update the ring count of the group */ group->mrg_cur_count++; /* Create per ring kstats */ if (ring->mr_stat != NULL) { ring->mr_mip = mip; mac_ring_stat_create(ring); } return (ring); } /* * Rings are chained together for easy regrouping. */ static void mac_init_group(mac_impl_t *mip, mac_group_t *group, int size, mac_capab_rings_t *cap_rings) { int index; /* * Initialize all ring members of this group. Size of zero will not * enter the loop, so it's safe for initializing an empty group. */ for (index = size - 1; index >= 0; index--) (void) mac_init_ring(mip, group, index, cap_rings); } int mac_init_rings(mac_impl_t *mip, mac_ring_type_t rtype) { mac_capab_rings_t *cap_rings; mac_group_t *group; mac_group_t *groups; mac_group_info_t group_info; uint_t group_free = 0; uint_t ring_left; mac_ring_t *ring; int g; int err = 0; uint_t grpcnt; boolean_t pseudo_txgrp = B_FALSE; switch (rtype) { case MAC_RING_TYPE_RX: ASSERT(mip->mi_rx_groups == NULL); cap_rings = &mip->mi_rx_rings_cap; cap_rings->mr_type = MAC_RING_TYPE_RX; break; case MAC_RING_TYPE_TX: ASSERT(mip->mi_tx_groups == NULL); cap_rings = &mip->mi_tx_rings_cap; cap_rings->mr_type = MAC_RING_TYPE_TX; break; default: ASSERT(B_FALSE); } if (!i_mac_capab_get((mac_handle_t)mip, MAC_CAPAB_RINGS, cap_rings)) return (0); grpcnt = cap_rings->mr_gnum; /* * If we have multiple TX rings, but only one TX group, we can * create pseudo TX groups (one per TX ring) in the MAC layer, * except for an aggr. For an aggr currently we maintain only * one group with all the rings (for all its ports), going * forwards we might change this. */ if (rtype == MAC_RING_TYPE_TX && cap_rings->mr_gnum == 0 && cap_rings->mr_rnum > 0 && (mip->mi_state_flags & MIS_IS_AGGR) == 0) { /* * The -1 here is because we create a default TX group * with all the rings in it. */ grpcnt = cap_rings->mr_rnum - 1; pseudo_txgrp = B_TRUE; } /* * Allocate a contiguous buffer for all groups. */ groups = kmem_zalloc(sizeof (mac_group_t) * (grpcnt+ 1), KM_SLEEP); ring_left = cap_rings->mr_rnum; /* * Get all ring groups if any, and get their ring members * if any. */ for (g = 0; g < grpcnt; g++) { group = groups + g; /* Prepare basic information of the group */ group->mrg_index = g; group->mrg_type = rtype; group->mrg_state = MAC_GROUP_STATE_UNINIT; group->mrg_mh = (mac_handle_t)mip; group->mrg_next = group + 1; /* Zero to reuse the info data structure */ bzero(&group_info, sizeof (group_info)); if (pseudo_txgrp) { /* * This is a pseudo group that we created, apart * from setting the state there is nothing to be * done. */ group->mrg_state = MAC_GROUP_STATE_REGISTERED; group_free++; continue; } /* Query group information from driver */ cap_rings->mr_gget(mip->mi_driver, rtype, g, &group_info, (mac_group_handle_t)group); switch (cap_rings->mr_group_type) { case MAC_GROUP_TYPE_DYNAMIC: if (cap_rings->mr_gaddring == NULL || cap_rings->mr_gremring == NULL) { DTRACE_PROBE3( mac__init__rings_no_addremring, char *, mip->mi_name, mac_group_add_ring_t, cap_rings->mr_gaddring, mac_group_add_ring_t, cap_rings->mr_gremring); err = EINVAL; goto bail; } switch (rtype) { case MAC_RING_TYPE_RX: /* * The first RX group must have non-zero * rings, and the following groups must * have zero rings. */ if (g == 0 && group_info.mgi_count == 0) { DTRACE_PROBE1( mac__init__rings__rx__def__zero, char *, mip->mi_name); err = EINVAL; goto bail; } if (g > 0 && group_info.mgi_count != 0) { DTRACE_PROBE3( mac__init__rings__rx__nonzero, char *, mip->mi_name, int, g, int, group_info.mgi_count); err = EINVAL; goto bail; } break; case MAC_RING_TYPE_TX: /* * All TX ring groups must have zero rings. */ if (group_info.mgi_count != 0) { DTRACE_PROBE3( mac__init__rings__tx__nonzero, char *, mip->mi_name, int, g, int, group_info.mgi_count); err = EINVAL; goto bail; } break; } break; case MAC_GROUP_TYPE_STATIC: /* * Note that an empty group is allowed, e.g., an aggr * would start with an empty group. */ break; default: /* unknown group type */ DTRACE_PROBE2(mac__init__rings__unknown__type, char *, mip->mi_name, int, cap_rings->mr_group_type); err = EINVAL; goto bail; } /* * Driver must register group->mgi_addmac/remmac() for rx groups * to support multiple MAC addresses. */ if (rtype == MAC_RING_TYPE_RX && ((group_info.mgi_addmac == NULL) || (group_info.mgi_remmac == NULL))) { err = EINVAL; goto bail; } /* Cache driver-supplied information */ group->mrg_info = group_info; /* Update the group's status and group count. */ mac_set_group_state(group, MAC_GROUP_STATE_REGISTERED); group_free++; group->mrg_rings = NULL; group->mrg_cur_count = 0; mac_init_group(mip, group, group_info.mgi_count, cap_rings); ring_left -= group_info.mgi_count; /* The current group size should be equal to default value */ ASSERT(group->mrg_cur_count == group_info.mgi_count); } /* Build up a dummy group for free resources as a pool */ group = groups + grpcnt; /* Prepare basic information of the group */ group->mrg_index = -1; group->mrg_type = rtype; group->mrg_state = MAC_GROUP_STATE_UNINIT; group->mrg_mh = (mac_handle_t)mip; group->mrg_next = NULL; /* * If there are ungrouped rings, allocate a continuous buffer for * remaining resources. */ if (ring_left != 0) { group->mrg_rings = NULL; group->mrg_cur_count = 0; mac_init_group(mip, group, ring_left, cap_rings); /* The current group size should be equal to ring_left */ ASSERT(group->mrg_cur_count == ring_left); ring_left = 0; /* Update this group's status */ mac_set_group_state(group, MAC_GROUP_STATE_REGISTERED); } else group->mrg_rings = NULL; ASSERT(ring_left == 0); bail: /* Cache other important information to finalize the initialization */ switch (rtype) { case MAC_RING_TYPE_RX: mip->mi_rx_group_type = cap_rings->mr_group_type; mip->mi_rx_group_count = cap_rings->mr_gnum; mip->mi_rx_groups = groups; mip->mi_rx_donor_grp = groups; if (mip->mi_rx_group_type == MAC_GROUP_TYPE_DYNAMIC) { /* * The default ring is reserved since it is * used for sending the broadcast etc. packets. */ mip->mi_rxrings_avail = mip->mi_rx_groups->mrg_cur_count - 1; mip->mi_rxrings_rsvd = 1; } /* * The default group cannot be reserved. It is used by * all the clients that do not have an exclusive group. */ mip->mi_rxhwclnt_avail = mip->mi_rx_group_count - 1; mip->mi_rxhwclnt_used = 1; break; case MAC_RING_TYPE_TX: mip->mi_tx_group_type = pseudo_txgrp ? MAC_GROUP_TYPE_DYNAMIC : cap_rings->mr_group_type; mip->mi_tx_group_count = grpcnt; mip->mi_tx_group_free = group_free; mip->mi_tx_groups = groups; group = groups + grpcnt; ring = group->mrg_rings; /* * The ring can be NULL in the case of aggr. Aggr will * have an empty Tx group which will get populated * later when pseudo Tx rings are added after * mac_register() is done. */ if (ring == NULL) { ASSERT(mip->mi_state_flags & MIS_IS_AGGR); /* * pass the group to aggr so it can add Tx * rings to the group later. */ cap_rings->mr_gget(mip->mi_driver, rtype, 0, NULL, (mac_group_handle_t)group); /* * Even though there are no rings at this time * (rings will come later), set the group * state to registered. */ group->mrg_state = MAC_GROUP_STATE_REGISTERED; } else { /* * Ring 0 is used as the default one and it could be * assigned to a client as well. */ while ((ring->mr_index != 0) && (ring->mr_next != NULL)) ring = ring->mr_next; ASSERT(ring->mr_index == 0); mip->mi_default_tx_ring = (mac_ring_handle_t)ring; } if (mip->mi_tx_group_type == MAC_GROUP_TYPE_DYNAMIC) { mip->mi_txrings_avail = group->mrg_cur_count - 1; /* * The default ring cannot be reserved. */ mip->mi_txrings_rsvd = 1; } /* * The default group cannot be reserved. It will be shared * by clients that do not have an exclusive group. */ mip->mi_txhwclnt_avail = mip->mi_tx_group_count; mip->mi_txhwclnt_used = 1; break; default: ASSERT(B_FALSE); } if (err != 0) mac_free_rings(mip, rtype); return (err); } /* * The ddi interrupt handle could be shared amoung rings. If so, compare * the new ring's ddi handle with the existing ones and set ddi_shared * flag. */ void mac_compare_ddi_handle(mac_group_t *groups, uint_t grpcnt, mac_ring_t *cring) { mac_group_t *group; mac_ring_t *ring; ddi_intr_handle_t ddi_handle; int g; ddi_handle = cring->mr_info.mri_intr.mi_ddi_handle; for (g = 0; g < grpcnt; g++) { group = groups + g; for (ring = group->mrg_rings; ring != NULL; ring = ring->mr_next) { if (ring == cring) continue; if (ring->mr_info.mri_intr.mi_ddi_handle == ddi_handle) { if (cring->mr_type == MAC_RING_TYPE_RX && ring->mr_index == 0 && !ring->mr_info.mri_intr.mi_ddi_shared) { ring->mr_info.mri_intr.mi_ddi_shared = B_TRUE; } else { cring->mr_info.mri_intr.mi_ddi_shared = B_TRUE; } return; } } } } /* * Called to free all groups of particular type (RX or TX). It's assumed that * no clients are using these groups. */ void mac_free_rings(mac_impl_t *mip, mac_ring_type_t rtype) { mac_group_t *group, *groups; uint_t group_count; switch (rtype) { case MAC_RING_TYPE_RX: if (mip->mi_rx_groups == NULL) return; groups = mip->mi_rx_groups; group_count = mip->mi_rx_group_count; mip->mi_rx_groups = NULL; mip->mi_rx_donor_grp = NULL; mip->mi_rx_group_count = 0; break; case MAC_RING_TYPE_TX: ASSERT(mip->mi_tx_group_count == mip->mi_tx_group_free); if (mip->mi_tx_groups == NULL) return; groups = mip->mi_tx_groups; group_count = mip->mi_tx_group_count; mip->mi_tx_groups = NULL; mip->mi_tx_group_count = 0; mip->mi_tx_group_free = 0; mip->mi_default_tx_ring = NULL; break; default: ASSERT(B_FALSE); } for (group = groups; group != NULL; group = group->mrg_next) { mac_ring_t *ring; if (group->mrg_cur_count == 0) continue; ASSERT(group->mrg_rings != NULL); while ((ring = group->mrg_rings) != NULL) { group->mrg_rings = ring->mr_next; mac_ring_free(mip, ring); } } /* Free all the cached rings */ mac_ring_freeall(mip); /* Free the block of group data strutures */ kmem_free(groups, sizeof (mac_group_t) * (group_count + 1)); } /* * Associate a MAC address with a receive group. * * The return value of this function should always be checked properly, because * any type of failure could cause unexpected results. A group can be added * or removed with a MAC address only after it has been reserved. Ideally, * a successful reservation always leads to calling mac_group_addmac() to * steer desired traffic. Failure of adding an unicast MAC address doesn't * always imply that the group is functioning abnormally. * * Currently this function is called everywhere, and it reflects assumptions * about MAC addresses in the implementation. CR 6735196. */ int mac_group_addmac(mac_group_t *group, const uint8_t *addr) { ASSERT(group->mrg_type == MAC_RING_TYPE_RX); ASSERT(group->mrg_info.mgi_addmac != NULL); return (group->mrg_info.mgi_addmac(group->mrg_info.mgi_driver, addr)); } /* * Remove the association between MAC address and receive group. */ int mac_group_remmac(mac_group_t *group, const uint8_t *addr) { ASSERT(group->mrg_type == MAC_RING_TYPE_RX); ASSERT(group->mrg_info.mgi_remmac != NULL); return (group->mrg_info.mgi_remmac(group->mrg_info.mgi_driver, addr)); } /* * This is the entry point for packets transmitted through the bridging code. * If no bridge is in place, MAC_RING_TX transmits using tx ring. The 'rh' * pointer may be NULL to select the default ring. */ mblk_t * mac_bridge_tx(mac_impl_t *mip, mac_ring_handle_t rh, mblk_t *mp) { mac_handle_t mh; /* * Once we take a reference on the bridge link, the bridge * module itself can't unload, so the callback pointers are * stable. */ mutex_enter(&mip->mi_bridge_lock); if ((mh = mip->mi_bridge_link) != NULL) mac_bridge_ref_cb(mh, B_TRUE); mutex_exit(&mip->mi_bridge_lock); if (mh == NULL) { MAC_RING_TX(mip, rh, mp, mp); } else { mp = mac_bridge_tx_cb(mh, rh, mp); mac_bridge_ref_cb(mh, B_FALSE); } return (mp); } /* * Find a ring from its index. */ mac_ring_handle_t mac_find_ring(mac_group_handle_t gh, int index) { mac_group_t *group = (mac_group_t *)gh; mac_ring_t *ring = group->mrg_rings; for (ring = group->mrg_rings; ring != NULL; ring = ring->mr_next) if (ring->mr_index == index) break; return ((mac_ring_handle_t)ring); } /* * Add a ring to an existing group. * * The ring must be either passed directly (for example if the ring * movement is initiated by the framework), or specified through a driver * index (for example when the ring is added by the driver. * * The caller needs to call mac_perim_enter() before calling this function. */ int i_mac_group_add_ring(mac_group_t *group, mac_ring_t *ring, int index) { mac_impl_t *mip = (mac_impl_t *)group->mrg_mh; mac_capab_rings_t *cap_rings; boolean_t driver_call = (ring == NULL); mac_group_type_t group_type; int ret = 0; flow_entry_t *flent; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); switch (group->mrg_type) { case MAC_RING_TYPE_RX: cap_rings = &mip->mi_rx_rings_cap; group_type = mip->mi_rx_group_type; break; case MAC_RING_TYPE_TX: cap_rings = &mip->mi_tx_rings_cap; group_type = mip->mi_tx_group_type; break; default: ASSERT(B_FALSE); } /* * There should be no ring with the same ring index in the target * group. */ ASSERT(mac_find_ring((mac_group_handle_t)group, driver_call ? index : ring->mr_index) == NULL); if (driver_call) { /* * The function is called as a result of a request from * a driver to add a ring to an existing group, for example * from the aggregation driver. Allocate a new mac_ring_t * for that ring. */ ring = mac_init_ring(mip, group, index, cap_rings); ASSERT(group->mrg_state > MAC_GROUP_STATE_UNINIT); } else { /* * The function is called as a result of a MAC layer request * to add a ring to an existing group. In this case the * ring is being moved between groups, which requires * the underlying driver to support dynamic grouping, * and the mac_ring_t already exists. */ ASSERT(group_type == MAC_GROUP_TYPE_DYNAMIC); ASSERT(group->mrg_driver == NULL || cap_rings->mr_gaddring != NULL); ASSERT(ring->mr_gh == NULL); } /* * At this point the ring should not be in use, and it should be * of the right for the target group. */ ASSERT(ring->mr_state < MR_INUSE); ASSERT(ring->mr_srs == NULL); ASSERT(ring->mr_type == group->mrg_type); if (!driver_call) { /* * Add the driver level hardware ring if the process was not * initiated by the driver, and the target group is not the * group. */ if (group->mrg_driver != NULL) { cap_rings->mr_gaddring(group->mrg_driver, ring->mr_driver, ring->mr_type); } /* * Insert the ring ahead existing rings. */ ring->mr_next = group->mrg_rings; group->mrg_rings = ring; ring->mr_gh = (mac_group_handle_t)group; group->mrg_cur_count++; } /* * If the group has not been actively used, we're done. */ if (group->mrg_index != -1 && group->mrg_state < MAC_GROUP_STATE_RESERVED) return (0); /* * Start the ring if needed. Failure causes to undo the grouping action. */ if (ring->mr_state != MR_INUSE) { if ((ret = mac_start_ring(ring)) != 0) { if (!driver_call) { cap_rings->mr_gremring(group->mrg_driver, ring->mr_driver, ring->mr_type); } group->mrg_cur_count--; group->mrg_rings = ring->mr_next; ring->mr_gh = NULL; if (driver_call) mac_ring_free(mip, ring); return (ret); } } /* * Set up SRS/SR according to the ring type. */ switch (ring->mr_type) { case MAC_RING_TYPE_RX: /* * Setup SRS on top of the new ring if the group is * reserved for someones exclusive use. */ if (group->mrg_state == MAC_GROUP_STATE_RESERVED) { mac_client_impl_t *mcip; mcip = MAC_GROUP_ONLY_CLIENT(group); /* * Even though this group is reserved we migth still * have multiple clients, i.e a VLAN shares the * group with the primary mac client. */ if (mcip != NULL) { flent = mcip->mci_flent; ASSERT(flent->fe_rx_srs_cnt > 0); mac_rx_srs_group_setup(mcip, flent, SRST_LINK); mac_fanout_setup(mcip, flent, MCIP_RESOURCE_PROPS(mcip), mac_rx_deliver, mcip, NULL, NULL); } else { ring->mr_classify_type = MAC_SW_CLASSIFIER; } } break; case MAC_RING_TYPE_TX: { mac_grp_client_t *mgcp = group->mrg_clients; mac_client_impl_t *mcip; mac_soft_ring_set_t *mac_srs; mac_srs_tx_t *tx; if (MAC_GROUP_NO_CLIENT(group)) { if (ring->mr_state == MR_INUSE) mac_stop_ring(ring); ring->mr_flag = 0; break; } /* * If the rings are being moved to a group that has * clients using it, then add the new rings to the * clients SRS. */ while (mgcp != NULL) { boolean_t is_aggr; mcip = mgcp->mgc_client; flent = mcip->mci_flent; is_aggr = (mcip->mci_state_flags & MCIS_IS_AGGR); mac_srs = MCIP_TX_SRS(mcip); tx = &mac_srs->srs_tx; mac_tx_client_quiesce((mac_client_handle_t)mcip); /* * If we are growing from 1 to multiple rings. */ if (tx->st_mode == SRS_TX_BW || tx->st_mode == SRS_TX_SERIALIZE || tx->st_mode == SRS_TX_DEFAULT) { mac_ring_t *tx_ring = tx->st_arg2; tx->st_arg2 = NULL; mac_tx_srs_stat_recreate(mac_srs, B_TRUE); mac_tx_srs_add_ring(mac_srs, tx_ring); if (mac_srs->srs_type & SRST_BW_CONTROL) { tx->st_mode = is_aggr ? SRS_TX_BW_AGGR : SRS_TX_BW_FANOUT; } else { tx->st_mode = is_aggr ? SRS_TX_AGGR : SRS_TX_FANOUT; } tx->st_func = mac_tx_get_func(tx->st_mode); } mac_tx_srs_add_ring(mac_srs, ring); mac_fanout_setup(mcip, flent, MCIP_RESOURCE_PROPS(mcip), mac_rx_deliver, mcip, NULL, NULL); mac_tx_client_restart((mac_client_handle_t)mcip); mgcp = mgcp->mgc_next; } break; } default: ASSERT(B_FALSE); } /* * For aggr, the default ring will be NULL to begin with. If it * is NULL, then pick the first ring that gets added as the * default ring. Any ring in an aggregation can be removed at * any time (by the user action of removing a link) and if the * current default ring gets removed, then a new one gets * picked (see i_mac_group_rem_ring()). */ if (mip->mi_state_flags & MIS_IS_AGGR && mip->mi_default_tx_ring == NULL && ring->mr_type == MAC_RING_TYPE_TX) { mip->mi_default_tx_ring = (mac_ring_handle_t)ring; } MAC_RING_UNMARK(ring, MR_INCIPIENT); return (0); } /* * Remove a ring from it's current group. MAC internal function for dynamic * grouping. * * The caller needs to call mac_perim_enter() before calling this function. */ void i_mac_group_rem_ring(mac_group_t *group, mac_ring_t *ring, boolean_t driver_call) { mac_impl_t *mip = (mac_impl_t *)group->mrg_mh; mac_capab_rings_t *cap_rings = NULL; mac_group_type_t group_type; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); ASSERT(mac_find_ring((mac_group_handle_t)group, ring->mr_index) == (mac_ring_handle_t)ring); ASSERT((mac_group_t *)ring->mr_gh == group); ASSERT(ring->mr_type == group->mrg_type); if (ring->mr_state == MR_INUSE) mac_stop_ring(ring); switch (ring->mr_type) { case MAC_RING_TYPE_RX: group_type = mip->mi_rx_group_type; cap_rings = &mip->mi_rx_rings_cap; /* * Only hardware classified packets hold a reference to the * ring all the way up the Rx path. mac_rx_srs_remove() * will take care of quiescing the Rx path and removing the * SRS. The software classified path neither holds a reference * nor any association with the ring in mac_rx. */ if (ring->mr_srs != NULL) { mac_rx_srs_remove(ring->mr_srs); ring->mr_srs = NULL; } break; case MAC_RING_TYPE_TX: { mac_grp_client_t *mgcp; mac_client_impl_t *mcip; mac_soft_ring_set_t *mac_srs; mac_srs_tx_t *tx; mac_ring_t *rem_ring; mac_group_t *defgrp; uint_t ring_info = 0; /* * For TX this function is invoked in three * cases: * * 1) In the case of a failure during the * initial creation of a group when a share is * associated with a MAC client. So the SRS is not * yet setup, and will be setup later after the * group has been reserved and populated. * * 2) From mac_release_tx_group() when freeing * a TX SRS. * * 3) In the case of aggr, when a port gets removed, * the pseudo Tx rings that it exposed gets removed. * * In the first two cases the SRS and its soft * rings are already quiesced. */ if (driver_call) { mac_client_impl_t *mcip; mac_soft_ring_set_t *mac_srs; mac_soft_ring_t *sringp; mac_srs_tx_t *srs_tx; if (mip->mi_state_flags & MIS_IS_AGGR && mip->mi_default_tx_ring == (mac_ring_handle_t)ring) { /* pick a new default Tx ring */ mip->mi_default_tx_ring = (group->mrg_rings != ring) ? (mac_ring_handle_t)group->mrg_rings : (mac_ring_handle_t)(ring->mr_next); } /* Presently only aggr case comes here */ if (group->mrg_state != MAC_GROUP_STATE_RESERVED) break; mcip = MAC_GROUP_ONLY_CLIENT(group); ASSERT(mcip != NULL); ASSERT(mcip->mci_state_flags & MCIS_IS_AGGR); mac_srs = MCIP_TX_SRS(mcip); ASSERT(mac_srs->srs_tx.st_mode == SRS_TX_AGGR || mac_srs->srs_tx.st_mode == SRS_TX_BW_AGGR); srs_tx = &mac_srs->srs_tx; /* * Wakeup any callers blocked on this * Tx ring due to flow control. */ sringp = srs_tx->st_soft_rings[ring->mr_index]; ASSERT(sringp != NULL); mac_tx_invoke_callbacks(mcip, (mac_tx_cookie_t)sringp); mac_tx_client_quiesce((mac_client_handle_t)mcip); mac_tx_srs_del_ring(mac_srs, ring); mac_tx_client_restart((mac_client_handle_t)mcip); break; } ASSERT(ring != (mac_ring_t *)mip->mi_default_tx_ring); group_type = mip->mi_tx_group_type; cap_rings = &mip->mi_tx_rings_cap; /* * See if we need to take it out of the MAC clients using * this group */ if (MAC_GROUP_NO_CLIENT(group)) break; mgcp = group->mrg_clients; defgrp = MAC_DEFAULT_TX_GROUP(mip); while (mgcp != NULL) { mcip = mgcp->mgc_client; mac_srs = MCIP_TX_SRS(mcip); tx = &mac_srs->srs_tx; mac_tx_client_quiesce((mac_client_handle_t)mcip); /* * If we are here when removing rings from the * defgroup, mac_reserve_tx_ring would have * already deleted the ring from the MAC * clients in the group. */ if (group != defgrp) { mac_tx_invoke_callbacks(mcip, (mac_tx_cookie_t) mac_tx_srs_get_soft_ring(mac_srs, ring)); mac_tx_srs_del_ring(mac_srs, ring); } /* * Additionally, if we are left with only * one ring in the group after this, we need * to modify the mode etc. to. (We haven't * yet taken the ring out, so we check with 2). */ if (group->mrg_cur_count == 2) { if (ring->mr_next == NULL) rem_ring = group->mrg_rings; else rem_ring = ring->mr_next; mac_tx_invoke_callbacks(mcip, (mac_tx_cookie_t) mac_tx_srs_get_soft_ring(mac_srs, rem_ring)); mac_tx_srs_del_ring(mac_srs, rem_ring); if (rem_ring->mr_state != MR_INUSE) { (void) mac_start_ring(rem_ring); } tx->st_arg2 = (void *)rem_ring; mac_tx_srs_stat_recreate(mac_srs, B_FALSE); ring_info = mac_hwring_getinfo( (mac_ring_handle_t)rem_ring); /* * We are shrinking from multiple * to 1 ring. */ if (mac_srs->srs_type & SRST_BW_CONTROL) { tx->st_mode = SRS_TX_BW; } else if (mac_tx_serialize || (ring_info & MAC_RING_TX_SERIALIZE)) { tx->st_mode = SRS_TX_SERIALIZE; } else { tx->st_mode = SRS_TX_DEFAULT; } tx->st_func = mac_tx_get_func(tx->st_mode); } mac_tx_client_restart((mac_client_handle_t)mcip); mgcp = mgcp->mgc_next; } break; } default: ASSERT(B_FALSE); } /* * Remove the ring from the group. */ if (ring == group->mrg_rings) group->mrg_rings = ring->mr_next; else { mac_ring_t *pre; pre = group->mrg_rings; while (pre->mr_next != ring) pre = pre->mr_next; pre->mr_next = ring->mr_next; } group->mrg_cur_count--; if (!driver_call) { ASSERT(group_type == MAC_GROUP_TYPE_DYNAMIC); ASSERT(group->mrg_driver == NULL || cap_rings->mr_gremring != NULL); /* * Remove the driver level hardware ring. */ if (group->mrg_driver != NULL) { cap_rings->mr_gremring(group->mrg_driver, ring->mr_driver, ring->mr_type); } } ring->mr_gh = NULL; if (driver_call) mac_ring_free(mip, ring); else ring->mr_flag = 0; } /* * Move a ring to the target group. If needed, remove the ring from the group * that it currently belongs to. * * The caller need to enter MAC's perimeter by calling mac_perim_enter(). */ static int mac_group_mov_ring(mac_impl_t *mip, mac_group_t *d_group, mac_ring_t *ring) { mac_group_t *s_group = (mac_group_t *)ring->mr_gh; int rv; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); ASSERT(d_group != NULL); ASSERT(s_group->mrg_mh == d_group->mrg_mh); if (s_group == d_group) return (0); /* * Remove it from current group first. */ if (s_group != NULL) i_mac_group_rem_ring(s_group, ring, B_FALSE); /* * Add it to the new group. */ rv = i_mac_group_add_ring(d_group, ring, 0); if (rv != 0) { /* * Failed to add ring back to source group. If * that fails, the ring is stuck in limbo, log message. */ if (i_mac_group_add_ring(s_group, ring, 0)) { cmn_err(CE_WARN, "%s: failed to move ring %p\n", mip->mi_name, (void *)ring); } } return (rv); } /* * Find a MAC address according to its value. */ mac_address_t * mac_find_macaddr(mac_impl_t *mip, uint8_t *mac_addr) { mac_address_t *map; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); for (map = mip->mi_addresses; map != NULL; map = map->ma_next) { if (bcmp(mac_addr, map->ma_addr, map->ma_len) == 0) break; } return (map); } /* * Check whether the MAC address is shared by multiple clients. */ boolean_t mac_check_macaddr_shared(mac_address_t *map) { ASSERT(MAC_PERIM_HELD((mac_handle_t)map->ma_mip)); return (map->ma_nusers > 1); } /* * Remove the specified MAC address from the MAC address list and free it. */ static void mac_free_macaddr(mac_address_t *map) { mac_impl_t *mip = map->ma_mip; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); ASSERT(mip->mi_addresses != NULL); map = mac_find_macaddr(mip, map->ma_addr); ASSERT(map != NULL); ASSERT(map->ma_nusers == 0); if (map == mip->mi_addresses) { mip->mi_addresses = map->ma_next; } else { mac_address_t *pre; pre = mip->mi_addresses; while (pre->ma_next != map) pre = pre->ma_next; pre->ma_next = map->ma_next; } kmem_free(map, sizeof (mac_address_t)); } /* * Add a MAC address reference for a client. If the desired MAC address * exists, add a reference to it. Otherwise, add the new address by adding * it to a reserved group or setting promiscuous mode. Won't try different * group is the group is non-NULL, so the caller must explictly share * default group when needed. * * Note, the primary MAC address is initialized at registration time, so * to add it to default group only need to activate it if its reference * count is still zero. Also, some drivers may not have advertised RINGS * capability. */ int mac_add_macaddr(mac_impl_t *mip, mac_group_t *group, uint8_t *mac_addr, boolean_t use_hw) { mac_address_t *map; int err = 0; boolean_t allocated_map = B_FALSE; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); map = mac_find_macaddr(mip, mac_addr); /* * If the new MAC address has not been added. Allocate a new one * and set it up. */ if (map == NULL) { map = kmem_zalloc(sizeof (mac_address_t), KM_SLEEP); map->ma_len = mip->mi_type->mt_addr_length; bcopy(mac_addr, map->ma_addr, map->ma_len); map->ma_nusers = 0; map->ma_group = group; map->ma_mip = mip; /* add the new MAC address to the head of the address list */ map->ma_next = mip->mi_addresses; mip->mi_addresses = map; allocated_map = B_TRUE; } ASSERT(map->ma_group == NULL || map->ma_group == group); if (map->ma_group == NULL) map->ma_group = group; /* * If the MAC address is already in use, simply account for the * new client. */ if (map->ma_nusers++ > 0) return (0); /* * Activate this MAC address by adding it to the reserved group. */ if (group != NULL) { err = mac_group_addmac(group, (const uint8_t *)mac_addr); if (err == 0) { map->ma_type = MAC_ADDRESS_TYPE_UNICAST_CLASSIFIED; return (0); } } /* * The MAC address addition failed. If the client requires a * hardware classified MAC address, fail the operation. */ if (use_hw) { err = ENOSPC; goto bail; } /* * Try promiscuous mode. * * For drivers that don't advertise RINGS capability, do * nothing for the primary address. */ if ((group == NULL) && (bcmp(map->ma_addr, mip->mi_addr, map->ma_len) == 0)) { map->ma_type = MAC_ADDRESS_TYPE_UNICAST_CLASSIFIED; return (0); } /* * Enable promiscuous mode in order to receive traffic * to the new MAC address. */ if ((err = i_mac_promisc_set(mip, B_TRUE)) == 0) { map->ma_type = MAC_ADDRESS_TYPE_UNICAST_PROMISC; return (0); } /* * Free the MAC address that could not be added. Don't free * a pre-existing address, it could have been the entry * for the primary MAC address which was pre-allocated by * mac_init_macaddr(), and which must remain on the list. */ bail: map->ma_nusers--; if (allocated_map) mac_free_macaddr(map); return (err); } /* * Remove a reference to a MAC address. This may cause to remove the MAC * address from an associated group or to turn off promiscuous mode. * The caller needs to handle the failure properly. */ int mac_remove_macaddr(mac_address_t *map) { mac_impl_t *mip = map->ma_mip; int err = 0; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); ASSERT(map == mac_find_macaddr(mip, map->ma_addr)); /* * If it's not the last client using this MAC address, only update * the MAC clients count. */ if (--map->ma_nusers > 0) return (0); /* * The MAC address is no longer used by any MAC client, so remove * it from its associated group, or turn off promiscuous mode * if it was enabled for the MAC address. */ switch (map->ma_type) { case MAC_ADDRESS_TYPE_UNICAST_CLASSIFIED: /* * Don't free the preset primary address for drivers that * don't advertise RINGS capability. */ if (map->ma_group == NULL) return (0); err = mac_group_remmac(map->ma_group, map->ma_addr); if (err == 0) map->ma_group = NULL; break; case MAC_ADDRESS_TYPE_UNICAST_PROMISC: err = i_mac_promisc_set(mip, B_FALSE); break; default: ASSERT(B_FALSE); } if (err != 0) return (err); /* * We created MAC address for the primary one at registration, so we * won't free it here. mac_fini_macaddr() will take care of it. */ if (bcmp(map->ma_addr, mip->mi_addr, map->ma_len) != 0) mac_free_macaddr(map); return (0); } /* * Update an existing MAC address. The caller need to make sure that the new * value has not been used. */ int mac_update_macaddr(mac_address_t *map, uint8_t *mac_addr) { mac_impl_t *mip = map->ma_mip; int err = 0; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); ASSERT(mac_find_macaddr(mip, mac_addr) == NULL); switch (map->ma_type) { case MAC_ADDRESS_TYPE_UNICAST_CLASSIFIED: /* * Update the primary address for drivers that are not * RINGS capable. */ if (mip->mi_rx_groups == NULL) { err = mip->mi_unicst(mip->mi_driver, (const uint8_t *) mac_addr); if (err != 0) return (err); break; } /* * If this MAC address is not currently in use, * simply break out and update the value. */ if (map->ma_nusers == 0) break; /* * Need to replace the MAC address associated with a group. */ err = mac_group_remmac(map->ma_group, map->ma_addr); if (err != 0) return (err); err = mac_group_addmac(map->ma_group, mac_addr); /* * Failure hints hardware error. The MAC layer needs to * have error notification facility to handle this. * Now, simply try to restore the value. */ if (err != 0) (void) mac_group_addmac(map->ma_group, map->ma_addr); break; case MAC_ADDRESS_TYPE_UNICAST_PROMISC: /* * Need to do nothing more if in promiscuous mode. */ break; default: ASSERT(B_FALSE); } /* * Successfully replaced the MAC address. */ if (err == 0) bcopy(mac_addr, map->ma_addr, map->ma_len); return (err); } /* * Freshen the MAC address with new value. Its caller must have updated the * hardware MAC address before calling this function. * This funcitons is supposed to be used to handle the MAC address change * notification from underlying drivers. */ void mac_freshen_macaddr(mac_address_t *map, uint8_t *mac_addr) { mac_impl_t *mip = map->ma_mip; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); ASSERT(mac_find_macaddr(mip, mac_addr) == NULL); /* * Freshen the MAC address with new value. */ bcopy(mac_addr, map->ma_addr, map->ma_len); bcopy(mac_addr, mip->mi_addr, map->ma_len); /* * Update all MAC clients that share this MAC address. */ mac_unicast_update_clients(mip, map); } /* * Set up the primary MAC address. */ void mac_init_macaddr(mac_impl_t *mip) { mac_address_t *map; /* * The reference count is initialized to zero, until it's really * activated. */ map = kmem_zalloc(sizeof (mac_address_t), KM_SLEEP); map->ma_len = mip->mi_type->mt_addr_length; bcopy(mip->mi_addr, map->ma_addr, map->ma_len); /* * If driver advertises RINGS capability, it shouldn't have initialized * its primary MAC address. For other drivers, including VNIC, the * primary address must work after registration. */ if (mip->mi_rx_groups == NULL) map->ma_type = MAC_ADDRESS_TYPE_UNICAST_CLASSIFIED; map->ma_mip = mip; mip->mi_addresses = map; } /* * Clean up the primary MAC address. Note, only one primary MAC address * is allowed. All other MAC addresses must have been freed appropriately. */ void mac_fini_macaddr(mac_impl_t *mip) { mac_address_t *map = mip->mi_addresses; if (map == NULL) return; /* * If mi_addresses is initialized, there should be exactly one * entry left on the list with no users. */ ASSERT(map->ma_nusers == 0); ASSERT(map->ma_next == NULL); kmem_free(map, sizeof (mac_address_t)); mip->mi_addresses = NULL; } /* * Logging related functions. * * Note that Kernel statistics have been extended to maintain fine * granularity of statistics viz. hardware lane, software lane, fanout * stats etc. However, extended accounting continues to support only * aggregate statistics like before. */ /* Write the flow description to a netinfo_t record */ static netinfo_t * mac_write_flow_desc(flow_entry_t *flent, mac_client_impl_t *mcip) { netinfo_t *ninfo; net_desc_t *ndesc; flow_desc_t *fdesc; mac_resource_props_t *mrp; ninfo = kmem_zalloc(sizeof (netinfo_t), KM_NOSLEEP); if (ninfo == NULL) return (NULL); ndesc = kmem_zalloc(sizeof (net_desc_t), KM_NOSLEEP); if (ndesc == NULL) { kmem_free(ninfo, sizeof (netinfo_t)); return (NULL); } /* * Grab the fe_lock to see a self-consistent fe_flow_desc. * Updates to the fe_flow_desc are done under the fe_lock */ mutex_enter(&flent->fe_lock); fdesc = &flent->fe_flow_desc; mrp = &flent->fe_resource_props; ndesc->nd_name = flent->fe_flow_name; ndesc->nd_devname = mcip->mci_name; bcopy(fdesc->fd_src_mac, ndesc->nd_ehost, ETHERADDRL); bcopy(fdesc->fd_dst_mac, ndesc->nd_edest, ETHERADDRL); ndesc->nd_sap = htonl(fdesc->fd_sap); ndesc->nd_isv4 = (uint8_t)fdesc->fd_ipversion == IPV4_VERSION; ndesc->nd_bw_limit = mrp->mrp_maxbw; if (ndesc->nd_isv4) { ndesc->nd_saddr[3] = htonl(fdesc->fd_local_addr.s6_addr32[3]); ndesc->nd_daddr[3] = htonl(fdesc->fd_remote_addr.s6_addr32[3]); } else { bcopy(&fdesc->fd_local_addr, ndesc->nd_saddr, IPV6_ADDR_LEN); bcopy(&fdesc->fd_remote_addr, ndesc->nd_daddr, IPV6_ADDR_LEN); } ndesc->nd_sport = htons(fdesc->fd_local_port); ndesc->nd_dport = htons(fdesc->fd_remote_port); ndesc->nd_protocol = (uint8_t)fdesc->fd_protocol; mutex_exit(&flent->fe_lock); ninfo->ni_record = ndesc; ninfo->ni_size = sizeof (net_desc_t); ninfo->ni_type = EX_NET_FLDESC_REC; return (ninfo); } /* Write the flow statistics to a netinfo_t record */ static netinfo_t * mac_write_flow_stats(flow_entry_t *flent) { netinfo_t *ninfo; net_stat_t *nstat; mac_soft_ring_set_t *mac_srs; mac_rx_stats_t *mac_rx_stat; mac_tx_stats_t *mac_tx_stat; int i; ninfo = kmem_zalloc(sizeof (netinfo_t), KM_NOSLEEP); if (ninfo == NULL) return (NULL); nstat = kmem_zalloc(sizeof (net_stat_t), KM_NOSLEEP); if (nstat == NULL) { kmem_free(ninfo, sizeof (netinfo_t)); return (NULL); } nstat->ns_name = flent->fe_flow_name; for (i = 0; i < flent->fe_rx_srs_cnt; i++) { mac_srs = (mac_soft_ring_set_t *)flent->fe_rx_srs[i]; mac_rx_stat = &mac_srs->srs_rx.sr_stat; nstat->ns_ibytes += mac_rx_stat->mrs_intrbytes + mac_rx_stat->mrs_pollbytes + mac_rx_stat->mrs_lclbytes; nstat->ns_ipackets += mac_rx_stat->mrs_intrcnt + mac_rx_stat->mrs_pollcnt + mac_rx_stat->mrs_lclcnt; nstat->ns_oerrors += mac_rx_stat->mrs_ierrors; } mac_srs = (mac_soft_ring_set_t *)(flent->fe_tx_srs); if (mac_srs != NULL) { mac_tx_stat = &mac_srs->srs_tx.st_stat; nstat->ns_obytes = mac_tx_stat->mts_obytes; nstat->ns_opackets = mac_tx_stat->mts_opackets; nstat->ns_oerrors = mac_tx_stat->mts_oerrors; } ninfo->ni_record = nstat; ninfo->ni_size = sizeof (net_stat_t); ninfo->ni_type = EX_NET_FLSTAT_REC; return (ninfo); } /* Write the link description to a netinfo_t record */ static netinfo_t * mac_write_link_desc(mac_client_impl_t *mcip) { netinfo_t *ninfo; net_desc_t *ndesc; flow_entry_t *flent = mcip->mci_flent; ninfo = kmem_zalloc(sizeof (netinfo_t), KM_NOSLEEP); if (ninfo == NULL) return (NULL); ndesc = kmem_zalloc(sizeof (net_desc_t), KM_NOSLEEP); if (ndesc == NULL) { kmem_free(ninfo, sizeof (netinfo_t)); return (NULL); } ndesc->nd_name = mcip->mci_name; ndesc->nd_devname = mcip->mci_name; ndesc->nd_isv4 = B_TRUE; /* * Grab the fe_lock to see a self-consistent fe_flow_desc. * Updates to the fe_flow_desc are done under the fe_lock * after removing the flent from the flow table. */ mutex_enter(&flent->fe_lock); bcopy(flent->fe_flow_desc.fd_src_mac, ndesc->nd_ehost, ETHERADDRL); mutex_exit(&flent->fe_lock); ninfo->ni_record = ndesc; ninfo->ni_size = sizeof (net_desc_t); ninfo->ni_type = EX_NET_LNDESC_REC; return (ninfo); } /* Write the link statistics to a netinfo_t record */ static netinfo_t * mac_write_link_stats(mac_client_impl_t *mcip) { netinfo_t *ninfo; net_stat_t *nstat; flow_entry_t *flent; mac_soft_ring_set_t *mac_srs; mac_rx_stats_t *mac_rx_stat; mac_tx_stats_t *mac_tx_stat; int i; ninfo = kmem_zalloc(sizeof (netinfo_t), KM_NOSLEEP); if (ninfo == NULL) return (NULL); nstat = kmem_zalloc(sizeof (net_stat_t), KM_NOSLEEP); if (nstat == NULL) { kmem_free(ninfo, sizeof (netinfo_t)); return (NULL); } nstat->ns_name = mcip->mci_name; flent = mcip->mci_flent; if (flent != NULL) { for (i = 0; i < flent->fe_rx_srs_cnt; i++) { mac_srs = (mac_soft_ring_set_t *)flent->fe_rx_srs[i]; mac_rx_stat = &mac_srs->srs_rx.sr_stat; nstat->ns_ibytes += mac_rx_stat->mrs_intrbytes + mac_rx_stat->mrs_pollbytes + mac_rx_stat->mrs_lclbytes; nstat->ns_ipackets += mac_rx_stat->mrs_intrcnt + mac_rx_stat->mrs_pollcnt + mac_rx_stat->mrs_lclcnt; nstat->ns_oerrors += mac_rx_stat->mrs_ierrors; } } mac_srs = (mac_soft_ring_set_t *)(mcip->mci_flent->fe_tx_srs); if (mac_srs != NULL) { mac_tx_stat = &mac_srs->srs_tx.st_stat; nstat->ns_obytes = mac_tx_stat->mts_obytes; nstat->ns_opackets = mac_tx_stat->mts_opackets; nstat->ns_oerrors = mac_tx_stat->mts_oerrors; } ninfo->ni_record = nstat; ninfo->ni_size = sizeof (net_stat_t); ninfo->ni_type = EX_NET_LNSTAT_REC; return (ninfo); } typedef struct i_mac_log_state_s { boolean_t mi_last; int mi_fenable; int mi_lenable; list_t *mi_list; } i_mac_log_state_t; /* * For a given flow, if the description has not been logged before, do it now. * If it is a VNIC, then we have collected information about it from the MAC * table, so skip it. * * Called through mac_flow_walk_nolock() * * Return 0 if successful. */ static int mac_log_flowinfo(flow_entry_t *flent, void *arg) { mac_client_impl_t *mcip = flent->fe_mcip; i_mac_log_state_t *lstate = arg; netinfo_t *ninfo; if (mcip == NULL) return (0); /* * If the name starts with "vnic", and fe_user_generated is true (to * exclude the mcast and active flow entries created implicitly for * a vnic, it is a VNIC flow. i.e. vnic1 is a vnic flow, * vnic/bge1/mcast1 is not and neither is vnic/bge1/active. */ if (strncasecmp(flent->fe_flow_name, "vnic", 4) == 0 && (flent->fe_type & FLOW_USER) != 0) { return (0); } if (!flent->fe_desc_logged) { /* * We don't return error because we want to continue the * walk in case this is the last walk which means we * need to reset fe_desc_logged in all the flows. */ if ((ninfo = mac_write_flow_desc(flent, mcip)) == NULL) return (0); list_insert_tail(lstate->mi_list, ninfo); flent->fe_desc_logged = B_TRUE; } /* * Regardless of the error, we want to proceed in case we have to * reset fe_desc_logged. */ ninfo = mac_write_flow_stats(flent); if (ninfo == NULL) return (-1); list_insert_tail(lstate->mi_list, ninfo); if (mcip != NULL && !(mcip->mci_state_flags & MCIS_DESC_LOGGED)) flent->fe_desc_logged = B_FALSE; return (0); } /* * Log the description for each mac client of this mac_impl_t, if it * hasn't already been done. Additionally, log statistics for the link as * well. Walk the flow table and log information for each flow as well. * If it is the last walk (mci_last), then we turn off mci_desc_logged (and * also fe_desc_logged, if flow logging is on) since we want to log the * description if and when logging is restarted. * * Return 0 upon success or -1 upon failure */ static int i_mac_impl_log(mac_impl_t *mip, i_mac_log_state_t *lstate) { mac_client_impl_t *mcip; netinfo_t *ninfo; i_mac_perim_enter(mip); /* * Only walk the client list for NIC and etherstub */ if ((mip->mi_state_flags & MIS_DISABLED) || ((mip->mi_state_flags & MIS_IS_VNIC) && (mac_get_lower_mac_handle((mac_handle_t)mip) != NULL))) { i_mac_perim_exit(mip); return (0); } for (mcip = mip->mi_clients_list; mcip != NULL; mcip = mcip->mci_client_next) { if (!MCIP_DATAPATH_SETUP(mcip)) continue; if (lstate->mi_lenable) { if (!(mcip->mci_state_flags & MCIS_DESC_LOGGED)) { ninfo = mac_write_link_desc(mcip); if (ninfo == NULL) { /* * We can't terminate it if this is the last * walk, else there might be some links with * mi_desc_logged set to true, which means * their description won't be logged the next * time logging is started (similarly for the * flows within such links). We can continue * without walking the flow table (i.e. to * set fe_desc_logged to false) because we * won't have written any flow stuff for this * link as we haven't logged the link itself. */ i_mac_perim_exit(mip); if (lstate->mi_last) return (0); else return (-1); } mcip->mci_state_flags |= MCIS_DESC_LOGGED; list_insert_tail(lstate->mi_list, ninfo); } } ninfo = mac_write_link_stats(mcip); if (ninfo == NULL && !lstate->mi_last) { i_mac_perim_exit(mip); return (-1); } list_insert_tail(lstate->mi_list, ninfo); if (lstate->mi_last) mcip->mci_state_flags &= ~MCIS_DESC_LOGGED; if (lstate->mi_fenable) { if (mcip->mci_subflow_tab != NULL) { (void) mac_flow_walk_nolock( mcip->mci_subflow_tab, mac_log_flowinfo, lstate); } } } i_mac_perim_exit(mip); return (0); } /* * modhash walker function to add a mac_impl_t to a list */ /*ARGSUSED*/ static uint_t i_mac_impl_list_walker(mod_hash_key_t key, mod_hash_val_t *val, void *arg) { list_t *list = (list_t *)arg; mac_impl_t *mip = (mac_impl_t *)val; if ((mip->mi_state_flags & MIS_DISABLED) == 0) { list_insert_tail(list, mip); mip->mi_ref++; } return (MH_WALK_CONTINUE); } void i_mac_log_info(list_t *net_log_list, i_mac_log_state_t *lstate) { list_t mac_impl_list; mac_impl_t *mip; netinfo_t *ninfo; /* Create list of mac_impls */ ASSERT(RW_LOCK_HELD(&i_mac_impl_lock)); list_create(&mac_impl_list, sizeof (mac_impl_t), offsetof(mac_impl_t, mi_node)); mod_hash_walk(i_mac_impl_hash, i_mac_impl_list_walker, &mac_impl_list); rw_exit(&i_mac_impl_lock); /* Create log entries for each mac_impl */ for (mip = list_head(&mac_impl_list); mip != NULL; mip = list_next(&mac_impl_list, mip)) { if (i_mac_impl_log(mip, lstate) != 0) continue; } /* Remove elements and destroy list of mac_impls */ rw_enter(&i_mac_impl_lock, RW_WRITER); while ((mip = list_remove_tail(&mac_impl_list)) != NULL) { mip->mi_ref--; } rw_exit(&i_mac_impl_lock); list_destroy(&mac_impl_list); /* * Write log entries to files outside of locks, free associated * structures, and remove entries from the list. */ while ((ninfo = list_head(net_log_list)) != NULL) { (void) exacct_commit_netinfo(ninfo->ni_record, ninfo->ni_type); list_remove(net_log_list, ninfo); kmem_free(ninfo->ni_record, ninfo->ni_size); kmem_free(ninfo, sizeof (*ninfo)); } list_destroy(net_log_list); } /* * The timer thread that runs every mac_logging_interval seconds and logs * link and/or flow information. */ /* ARGSUSED */ void mac_log_linkinfo(void *arg) { i_mac_log_state_t lstate; list_t net_log_list; list_create(&net_log_list, sizeof (netinfo_t), offsetof(netinfo_t, ni_link)); rw_enter(&i_mac_impl_lock, RW_READER); if (!mac_flow_log_enable && !mac_link_log_enable) { rw_exit(&i_mac_impl_lock); return; } lstate.mi_fenable = mac_flow_log_enable; lstate.mi_lenable = mac_link_log_enable; lstate.mi_last = B_FALSE; lstate.mi_list = &net_log_list; /* Write log entries for each mac_impl in the list */ i_mac_log_info(&net_log_list, &lstate); if (mac_flow_log_enable || mac_link_log_enable) { mac_logging_timer = timeout(mac_log_linkinfo, NULL, SEC_TO_TICK(mac_logging_interval)); } } typedef struct i_mac_fastpath_state_s { boolean_t mf_disable; int mf_err; } i_mac_fastpath_state_t; /* modhash walker function to enable or disable fastpath */ /*ARGSUSED*/ static uint_t i_mac_fastpath_walker(mod_hash_key_t key, mod_hash_val_t *val, void *arg) { i_mac_fastpath_state_t *state = arg; mac_handle_t mh = (mac_handle_t)val; if (state->mf_disable) state->mf_err = mac_fastpath_disable(mh); else mac_fastpath_enable(mh); return (state->mf_err == 0 ? MH_WALK_CONTINUE : MH_WALK_TERMINATE); } /* * Start the logging timer. */ int mac_start_logusage(mac_logtype_t type, uint_t interval) { i_mac_fastpath_state_t dstate = {B_TRUE, 0}; i_mac_fastpath_state_t estate = {B_FALSE, 0}; int err; rw_enter(&i_mac_impl_lock, RW_WRITER); switch (type) { case MAC_LOGTYPE_FLOW: if (mac_flow_log_enable) { rw_exit(&i_mac_impl_lock); return (0); } /* FALLTHRU */ case MAC_LOGTYPE_LINK: if (mac_link_log_enable) { rw_exit(&i_mac_impl_lock); return (0); } break; default: ASSERT(0); } /* Disable fastpath */ mod_hash_walk(i_mac_impl_hash, i_mac_fastpath_walker, &dstate); if ((err = dstate.mf_err) != 0) { /* Reenable fastpath */ mod_hash_walk(i_mac_impl_hash, i_mac_fastpath_walker, &estate); rw_exit(&i_mac_impl_lock); return (err); } switch (type) { case MAC_LOGTYPE_FLOW: mac_flow_log_enable = B_TRUE; /* FALLTHRU */ case MAC_LOGTYPE_LINK: mac_link_log_enable = B_TRUE; break; } mac_logging_interval = interval; rw_exit(&i_mac_impl_lock); mac_log_linkinfo(NULL); return (0); } /* * Stop the logging timer if both link and flow logging are turned off. */ void mac_stop_logusage(mac_logtype_t type) { i_mac_log_state_t lstate; i_mac_fastpath_state_t estate = {B_FALSE, 0}; list_t net_log_list; list_create(&net_log_list, sizeof (netinfo_t), offsetof(netinfo_t, ni_link)); rw_enter(&i_mac_impl_lock, RW_WRITER); lstate.mi_fenable = mac_flow_log_enable; lstate.mi_lenable = mac_link_log_enable; lstate.mi_list = &net_log_list; /* Last walk */ lstate.mi_last = B_TRUE; switch (type) { case MAC_LOGTYPE_FLOW: if (lstate.mi_fenable) { ASSERT(mac_link_log_enable); mac_flow_log_enable = B_FALSE; mac_link_log_enable = B_FALSE; break; } /* FALLTHRU */ case MAC_LOGTYPE_LINK: if (!lstate.mi_lenable || mac_flow_log_enable) { rw_exit(&i_mac_impl_lock); return; } mac_link_log_enable = B_FALSE; break; default: ASSERT(0); } /* Reenable fastpath */ mod_hash_walk(i_mac_impl_hash, i_mac_fastpath_walker, &estate); (void) untimeout(mac_logging_timer); mac_logging_timer = 0; /* Write log entries for each mac_impl in the list */ i_mac_log_info(&net_log_list, &lstate); } /* * Walk the rx and tx SRS/SRs for a flow and update the priority value. */ void mac_flow_update_priority(mac_client_impl_t *mcip, flow_entry_t *flent) { pri_t pri; int count; mac_soft_ring_set_t *mac_srs; if (flent->fe_rx_srs_cnt <= 0) return; if (((mac_soft_ring_set_t *)flent->fe_rx_srs[0])->srs_type == SRST_FLOW) { pri = FLOW_PRIORITY(mcip->mci_min_pri, mcip->mci_max_pri, flent->fe_resource_props.mrp_priority); } else { pri = mcip->mci_max_pri; } for (count = 0; count < flent->fe_rx_srs_cnt; count++) { mac_srs = flent->fe_rx_srs[count]; mac_update_srs_priority(mac_srs, pri); } /* * If we have a Tx SRS, we need to modify all the threads associated * with it. */ if (flent->fe_tx_srs != NULL) mac_update_srs_priority(flent->fe_tx_srs, pri); } /* * RX and TX rings are reserved according to different semantics depending * on the requests from the MAC clients and type of rings: * * On the Tx side, by default we reserve individual rings, independently from * the groups. * * On the Rx side, the reservation is at the granularity of the group * of rings, and used for v12n level 1 only. It has a special case for the * primary client. * * If a share is allocated to a MAC client, we allocate a TX group and an * RX group to the client, and assign TX rings and RX rings to these * groups according to information gathered from the driver through * the share capability. * * The foreseable evolution of Rx rings will handle v12n level 2 and higher * to allocate individual rings out of a group and program the hw classifier * based on IP address or higher level criteria. */ /* * mac_reserve_tx_ring() * Reserve a unused ring by marking it with MR_INUSE state. * As reserved, the ring is ready to function. * * Notes for Hybrid I/O: * * If a specific ring is needed, it is specified through the desired_ring * argument. Otherwise that argument is set to NULL. * If the desired ring was previous allocated to another client, this * function swaps it with a new ring from the group of unassigned rings. */ mac_ring_t * mac_reserve_tx_ring(mac_impl_t *mip, mac_ring_t *desired_ring) { mac_group_t *group; mac_grp_client_t *mgcp; mac_client_impl_t *mcip; mac_soft_ring_set_t *srs; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); /* * Find an available ring and start it before changing its status. * The unassigned rings are at the end of the mi_tx_groups * array. */ group = MAC_DEFAULT_TX_GROUP(mip); /* Can't take the default ring out of the default group */ ASSERT(desired_ring != (mac_ring_t *)mip->mi_default_tx_ring); if (desired_ring->mr_state == MR_FREE) { ASSERT(MAC_GROUP_NO_CLIENT(group)); if (mac_start_ring(desired_ring) != 0) return (NULL); return (desired_ring); } /* * There are clients using this ring, so let's move the clients * away from using this ring. */ for (mgcp = group->mrg_clients; mgcp != NULL; mgcp = mgcp->mgc_next) { mcip = mgcp->mgc_client; mac_tx_client_quiesce((mac_client_handle_t)mcip); srs = MCIP_TX_SRS(mcip); ASSERT(mac_tx_srs_ring_present(srs, desired_ring)); mac_tx_invoke_callbacks(mcip, (mac_tx_cookie_t)mac_tx_srs_get_soft_ring(srs, desired_ring)); mac_tx_srs_del_ring(srs, desired_ring); mac_tx_client_restart((mac_client_handle_t)mcip); } return (desired_ring); } /* * For a reserved group with multiple clients, return the primary client. */ static mac_client_impl_t * mac_get_grp_primary(mac_group_t *grp) { mac_grp_client_t *mgcp = grp->mrg_clients; mac_client_impl_t *mcip; while (mgcp != NULL) { mcip = mgcp->mgc_client; if (mcip->mci_flent->fe_type & FLOW_PRIMARY_MAC) return (mcip); mgcp = mgcp->mgc_next; } return (NULL); } /* * Hybrid I/O specifies the ring that should be given to a share. * If the ring is already used by clients, then we need to release * the ring back to the default group so that we can give it to * the share. This means the clients using this ring now get a * replacement ring. If there aren't any replacement rings, this * function returns a failure. */ static int mac_reclaim_ring_from_grp(mac_impl_t *mip, mac_ring_type_t ring_type, mac_ring_t *ring, mac_ring_t **rings, int nrings) { mac_group_t *group = (mac_group_t *)ring->mr_gh; mac_resource_props_t *mrp; mac_client_impl_t *mcip; mac_group_t *defgrp; mac_ring_t *tring; mac_group_t *tgrp; int i; int j; mcip = MAC_GROUP_ONLY_CLIENT(group); if (mcip == NULL) mcip = mac_get_grp_primary(group); ASSERT(mcip != NULL); ASSERT(mcip->mci_share == 0); mrp = MCIP_RESOURCE_PROPS(mcip); if (ring_type == MAC_RING_TYPE_RX) { defgrp = mip->mi_rx_donor_grp; if ((mrp->mrp_mask & MRP_RX_RINGS) == 0) { /* Need to put this mac client in the default group */ if (mac_rx_switch_group(mcip, group, defgrp) != 0) return (ENOSPC); } else { /* * Switch this ring with some other ring from * the default group. */ for (tring = defgrp->mrg_rings; tring != NULL; tring = tring->mr_next) { if (tring->mr_index == 0) continue; for (j = 0; j < nrings; j++) { if (rings[j] == tring) break; } if (j >= nrings) break; } if (tring == NULL) return (ENOSPC); if (mac_group_mov_ring(mip, group, tring) != 0) return (ENOSPC); if (mac_group_mov_ring(mip, defgrp, ring) != 0) { (void) mac_group_mov_ring(mip, defgrp, tring); return (ENOSPC); } } ASSERT(ring->mr_gh == (mac_group_handle_t)defgrp); return (0); } defgrp = MAC_DEFAULT_TX_GROUP(mip); if (ring == (mac_ring_t *)mip->mi_default_tx_ring) { /* * See if we can get a spare ring to replace the default * ring. */ if (defgrp->mrg_cur_count == 1) { /* * Need to get a ring from another client, see if * there are any clients that can be moved to * the default group, thereby freeing some rings. */ for (i = 0; i < mip->mi_tx_group_count; i++) { tgrp = &mip->mi_tx_groups[i]; if (tgrp->mrg_state == MAC_GROUP_STATE_REGISTERED) { continue; } mcip = MAC_GROUP_ONLY_CLIENT(tgrp); if (mcip == NULL) mcip = mac_get_grp_primary(tgrp); ASSERT(mcip != NULL); mrp = MCIP_RESOURCE_PROPS(mcip); if ((mrp->mrp_mask & MRP_TX_RINGS) == 0) { ASSERT(tgrp->mrg_cur_count == 1); /* * If this ring is part of the * rings asked by the share we cannot * use it as the default ring. */ for (j = 0; j < nrings; j++) { if (rings[j] == tgrp->mrg_rings) break; } if (j < nrings) continue; mac_tx_client_quiesce( (mac_client_handle_t)mcip); mac_tx_switch_group(mcip, tgrp, defgrp); mac_tx_client_restart( (mac_client_handle_t)mcip); break; } } /* * All the rings are reserved, can't give up the * default ring. */ if (defgrp->mrg_cur_count <= 1) return (ENOSPC); } /* * Swap the default ring with another. */ for (tring = defgrp->mrg_rings; tring != NULL; tring = tring->mr_next) { /* * If this ring is part of the rings asked by the * share we cannot use it as the default ring. */ for (j = 0; j < nrings; j++) { if (rings[j] == tring) break; } if (j >= nrings) break; } ASSERT(tring != NULL); mip->mi_default_tx_ring = (mac_ring_handle_t)tring; return (0); } /* * The Tx ring is with a group reserved by a MAC client. See if * we can swap it. */ ASSERT(group->mrg_state == MAC_GROUP_STATE_RESERVED); mcip = MAC_GROUP_ONLY_CLIENT(group); if (mcip == NULL) mcip = mac_get_grp_primary(group); ASSERT(mcip != NULL); mrp = MCIP_RESOURCE_PROPS(mcip); mac_tx_client_quiesce((mac_client_handle_t)mcip); if ((mrp->mrp_mask & MRP_TX_RINGS) == 0) { ASSERT(group->mrg_cur_count == 1); /* Put this mac client in the default group */ mac_tx_switch_group(mcip, group, defgrp); } else { /* * Switch this ring with some other ring from * the default group. */ for (tring = defgrp->mrg_rings; tring != NULL; tring = tring->mr_next) { if (tring == (mac_ring_t *)mip->mi_default_tx_ring) continue; /* * If this ring is part of the rings asked by the * share we cannot use it for swapping. */ for (j = 0; j < nrings; j++) { if (rings[j] == tring) break; } if (j >= nrings) break; } if (tring == NULL) { mac_tx_client_restart((mac_client_handle_t)mcip); return (ENOSPC); } if (mac_group_mov_ring(mip, group, tring) != 0) { mac_tx_client_restart((mac_client_handle_t)mcip); return (ENOSPC); } if (mac_group_mov_ring(mip, defgrp, ring) != 0) { (void) mac_group_mov_ring(mip, defgrp, tring); mac_tx_client_restart((mac_client_handle_t)mcip); return (ENOSPC); } } mac_tx_client_restart((mac_client_handle_t)mcip); ASSERT(ring->mr_gh == (mac_group_handle_t)defgrp); return (0); } /* * Populate a zero-ring group with rings. If the share is non-NULL, * the rings are chosen according to that share. * Invoked after allocating a new RX or TX group through * mac_reserve_rx_group() or mac_reserve_tx_group(), respectively. * Returns zero on success, an errno otherwise. */ int i_mac_group_allocate_rings(mac_impl_t *mip, mac_ring_type_t ring_type, mac_group_t *src_group, mac_group_t *new_group, mac_share_handle_t share, uint32_t ringcnt) { mac_ring_t **rings, *ring; uint_t nrings; int rv = 0, i = 0, j; ASSERT((ring_type == MAC_RING_TYPE_RX && mip->mi_rx_group_type == MAC_GROUP_TYPE_DYNAMIC) || (ring_type == MAC_RING_TYPE_TX && mip->mi_tx_group_type == MAC_GROUP_TYPE_DYNAMIC)); /* * First find the rings to allocate to the group. */ if (share != 0) { /* get rings through ms_squery() */ mip->mi_share_capab.ms_squery(share, ring_type, NULL, &nrings); ASSERT(nrings != 0); rings = kmem_alloc(nrings * sizeof (mac_ring_handle_t), KM_SLEEP); mip->mi_share_capab.ms_squery(share, ring_type, (mac_ring_handle_t *)rings, &nrings); for (i = 0; i < nrings; i++) { /* * If we have given this ring to a non-default * group, we need to check if we can get this * ring. */ ring = rings[i]; if (ring->mr_gh != (mac_group_handle_t)src_group || ring == (mac_ring_t *)mip->mi_default_tx_ring) { if (mac_reclaim_ring_from_grp(mip, ring_type, ring, rings, nrings) != 0) { rv = ENOSPC; goto bail; } } } } else { /* * Pick one ring from default group. * * for now pick the second ring which requires the first ring * at index 0 to stay in the default group, since it is the * ring which carries the multicast traffic. * We need a better way for a driver to indicate this, * for example a per-ring flag. */ rings = kmem_alloc(ringcnt * sizeof (mac_ring_handle_t), KM_SLEEP); for (ring = src_group->mrg_rings; ring != NULL; ring = ring->mr_next) { if (ring_type == MAC_RING_TYPE_RX && ring->mr_index == 0) { continue; } if (ring_type == MAC_RING_TYPE_TX && ring == (mac_ring_t *)mip->mi_default_tx_ring) { continue; } rings[i++] = ring; if (i == ringcnt) break; } ASSERT(ring != NULL); nrings = i; /* Not enough rings as required */ if (nrings != ringcnt) { rv = ENOSPC; goto bail; } } switch (ring_type) { case MAC_RING_TYPE_RX: if (src_group->mrg_cur_count - nrings < 1) { /* we ran out of rings */ rv = ENOSPC; goto bail; } /* move receive rings to new group */ for (i = 0; i < nrings; i++) { rv = mac_group_mov_ring(mip, new_group, rings[i]); if (rv != 0) { /* move rings back on failure */ for (j = 0; j < i; j++) { (void) mac_group_mov_ring(mip, src_group, rings[j]); } goto bail; } } break; case MAC_RING_TYPE_TX: { mac_ring_t *tmp_ring; /* move the TX rings to the new group */ for (i = 0; i < nrings; i++) { /* get the desired ring */ tmp_ring = mac_reserve_tx_ring(mip, rings[i]); if (tmp_ring == NULL) { rv = ENOSPC; goto bail; } ASSERT(tmp_ring == rings[i]); rv = mac_group_mov_ring(mip, new_group, rings[i]); if (rv != 0) { /* cleanup on failure */ for (j = 0; j < i; j++) { (void) mac_group_mov_ring(mip, MAC_DEFAULT_TX_GROUP(mip), rings[j]); } goto bail; } } break; } } /* add group to share */ if (share != 0) mip->mi_share_capab.ms_sadd(share, new_group->mrg_driver); bail: /* free temporary array of rings */ kmem_free(rings, nrings * sizeof (mac_ring_handle_t)); return (rv); } void mac_group_add_client(mac_group_t *grp, mac_client_impl_t *mcip) { mac_grp_client_t *mgcp; for (mgcp = grp->mrg_clients; mgcp != NULL; mgcp = mgcp->mgc_next) { if (mgcp->mgc_client == mcip) break; } VERIFY(mgcp == NULL); mgcp = kmem_zalloc(sizeof (mac_grp_client_t), KM_SLEEP); mgcp->mgc_client = mcip; mgcp->mgc_next = grp->mrg_clients; grp->mrg_clients = mgcp; } void mac_group_remove_client(mac_group_t *grp, mac_client_impl_t *mcip) { mac_grp_client_t *mgcp, **pprev; for (pprev = &grp->mrg_clients, mgcp = *pprev; mgcp != NULL; pprev = &mgcp->mgc_next, mgcp = *pprev) { if (mgcp->mgc_client == mcip) break; } ASSERT(mgcp != NULL); *pprev = mgcp->mgc_next; kmem_free(mgcp, sizeof (mac_grp_client_t)); } /* * mac_reserve_rx_group() * * Finds an available group and exclusively reserves it for a client. * The group is chosen to suit the flow's resource controls (bandwidth and * fanout requirements) and the address type. * If the requestor is the pimary MAC then return the group with the * largest number of rings, otherwise the default ring when available. */ mac_group_t * mac_reserve_rx_group(mac_client_impl_t *mcip, uint8_t *mac_addr, boolean_t move) { mac_share_handle_t share = mcip->mci_share; mac_impl_t *mip = mcip->mci_mip; mac_group_t *grp = NULL; int i; int err = 0; mac_address_t *map; mac_resource_props_t *mrp = MCIP_RESOURCE_PROPS(mcip); int nrings; int donor_grp_rcnt; boolean_t need_exclgrp = B_FALSE; int need_rings = 0; mac_group_t *candidate_grp = NULL; mac_client_impl_t *gclient; mac_resource_props_t *gmrp; mac_group_t *donorgrp = NULL; boolean_t rxhw = mrp->mrp_mask & MRP_RX_RINGS; boolean_t unspec = mrp->mrp_mask & MRP_RXRINGS_UNSPEC; boolean_t isprimary; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); isprimary = mcip->mci_flent->fe_type & FLOW_PRIMARY_MAC; /* * Check if a group already has this mac address (case of VLANs) * unless we are moving this MAC client from one group to another. */ if (!move && (map = mac_find_macaddr(mip, mac_addr)) != NULL) { if (map->ma_group != NULL) return (map->ma_group); } if (mip->mi_rx_groups == NULL || mip->mi_rx_group_count == 0) return (NULL); /* * If exclusive open, return NULL which will enable the * caller to use the default group. */ if (mcip->mci_state_flags & MCIS_EXCLUSIVE) return (NULL); /* For dynamic groups default unspecified to 1 */ if (rxhw && unspec && mip->mi_rx_group_type == MAC_GROUP_TYPE_DYNAMIC) { mrp->mrp_nrxrings = 1; } /* * For static grouping we allow only specifying rings=0 and * unspecified */ if (rxhw && mrp->mrp_nrxrings > 0 && mip->mi_rx_group_type == MAC_GROUP_TYPE_STATIC) { return (NULL); } if (rxhw) { /* * We have explicitly asked for a group (with nrxrings, * if unspec). */ if (unspec || mrp->mrp_nrxrings > 0) { need_exclgrp = B_TRUE; need_rings = mrp->mrp_nrxrings; } else if (mrp->mrp_nrxrings == 0) { /* * We have asked for a software group. */ return (NULL); } } else if (isprimary && mip->mi_nactiveclients == 1 && mip->mi_rx_group_type == MAC_GROUP_TYPE_DYNAMIC) { /* * If the primary is the only active client on this * mip and we have not asked for any rings, we give * it the default group so that the primary gets to * use all the rings. */ return (NULL); } /* The group that can donate rings */ donorgrp = mip->mi_rx_donor_grp; /* * The number of rings that the default group can donate. * We need to leave at least one ring. */ donor_grp_rcnt = donorgrp->mrg_cur_count - 1; /* * Try to exclusively reserve a RX group. * * For flows requiring HW_DEFAULT_RING (unicast flow of the primary * client), try to reserve the a non-default RX group and give * it all the rings from the donor group, except the default ring * * For flows requiring HW_RING (unicast flow of other clients), try * to reserve non-default RX group with the specified number of * rings, if available. * * For flows that have not asked for software or hardware ring, * try to reserve a non-default group with 1 ring, if available. */ for (i = 1; i < mip->mi_rx_group_count; i++) { grp = &mip->mi_rx_groups[i]; DTRACE_PROBE3(rx__group__trying, char *, mip->mi_name, int, grp->mrg_index, mac_group_state_t, grp->mrg_state); /* * Check if this group could be a candidate group for * eviction if we need a group for this MAC client, * but there aren't any. A candidate group is one * that didn't ask for an exclusive group, but got * one and it has enough rings (combined with what * the donor group can donate) for the new MAC * client */ if (grp->mrg_state >= MAC_GROUP_STATE_RESERVED) { /* * If the primary/donor group is not the default * group, don't bother looking for a candidate group. * If we don't have enough rings we will check * if the primary group can be vacated. */ if (candidate_grp == NULL && donorgrp == MAC_DEFAULT_RX_GROUP(mip)) { ASSERT(!MAC_GROUP_NO_CLIENT(grp)); gclient = MAC_GROUP_ONLY_CLIENT(grp); if (gclient == NULL) gclient = mac_get_grp_primary(grp); ASSERT(gclient != NULL); gmrp = MCIP_RESOURCE_PROPS(gclient); if (gclient->mci_share == 0 && (gmrp->mrp_mask & MRP_RX_RINGS) == 0 && (unspec || (grp->mrg_cur_count + donor_grp_rcnt >= need_rings))) { candidate_grp = grp; } } continue; } /* * This group could already be SHARED by other multicast * flows on this client. In that case, the group would * be shared and has already been started. */ ASSERT(grp->mrg_state != MAC_GROUP_STATE_UNINIT); if ((grp->mrg_state == MAC_GROUP_STATE_REGISTERED) && (mac_start_group(grp) != 0)) { continue; } if (mip->mi_rx_group_type != MAC_GROUP_TYPE_DYNAMIC) break; ASSERT(grp->mrg_cur_count == 0); /* * Populate the group. Rings should be taken * from the donor group. */ nrings = rxhw ? need_rings : isprimary ? donor_grp_rcnt: 1; /* * If the donor group can't donate, let's just walk and * see if someone can vacate a group, so that we have * enough rings for this, unless we already have * identified a candiate group.. */ if (nrings <= donor_grp_rcnt) { err = i_mac_group_allocate_rings(mip, MAC_RING_TYPE_RX, donorgrp, grp, share, nrings); if (err == 0) { /* * For a share i_mac_group_allocate_rings gets * the rings from the driver, let's populate * the property for the client now. */ if (share != 0) { mac_client_set_rings( (mac_client_handle_t)mcip, grp->mrg_cur_count, -1); } if (mac_is_primary_client(mcip) && !rxhw) mip->mi_rx_donor_grp = grp; break; } } DTRACE_PROBE3(rx__group__reserve__alloc__rings, char *, mip->mi_name, int, grp->mrg_index, int, err); /* * It's a dynamic group but the grouping operation * failed. */ mac_stop_group(grp); } /* We didn't find an exclusive group for this MAC client */ if (i >= mip->mi_rx_group_count) { if (!need_exclgrp) return (NULL); /* * If we found a candidate group then we switch the * MAC client from the candidate_group to the default * group and give the group to this MAC client. If * we didn't find a candidate_group, check if the * primary is in its own group and if it can make way * for this MAC client. */ if (candidate_grp == NULL && donorgrp != MAC_DEFAULT_RX_GROUP(mip) && donorgrp->mrg_cur_count >= need_rings) { candidate_grp = donorgrp; } if (candidate_grp != NULL) { boolean_t prim_grp = B_FALSE; /* * Switch the MAC client from the candidate group * to the default group.. If this group was the * donor group, then after the switch we need * to update the donor group too. */ grp = candidate_grp; gclient = MAC_GROUP_ONLY_CLIENT(grp); if (gclient == NULL) gclient = mac_get_grp_primary(grp); if (grp == mip->mi_rx_donor_grp) prim_grp = B_TRUE; if (mac_rx_switch_group(gclient, grp, MAC_DEFAULT_RX_GROUP(mip)) != 0) { return (NULL); } if (prim_grp) { mip->mi_rx_donor_grp = MAC_DEFAULT_RX_GROUP(mip); donorgrp = MAC_DEFAULT_RX_GROUP(mip); } /* * Now give this group with the required rings * to this MAC client. */ ASSERT(grp->mrg_state == MAC_GROUP_STATE_REGISTERED); if (mac_start_group(grp) != 0) return (NULL); if (mip->mi_rx_group_type != MAC_GROUP_TYPE_DYNAMIC) return (grp); donor_grp_rcnt = donorgrp->mrg_cur_count - 1; ASSERT(grp->mrg_cur_count == 0); ASSERT(donor_grp_rcnt >= need_rings); err = i_mac_group_allocate_rings(mip, MAC_RING_TYPE_RX, donorgrp, grp, share, need_rings); if (err == 0) { /* * For a share i_mac_group_allocate_rings gets * the rings from the driver, let's populate * the property for the client now. */ if (share != 0) { mac_client_set_rings( (mac_client_handle_t)mcip, grp->mrg_cur_count, -1); } DTRACE_PROBE2(rx__group__reserved, char *, mip->mi_name, int, grp->mrg_index); return (grp); } DTRACE_PROBE3(rx__group__reserve__alloc__rings, char *, mip->mi_name, int, grp->mrg_index, int, err); mac_stop_group(grp); } return (NULL); } ASSERT(grp != NULL); DTRACE_PROBE2(rx__group__reserved, char *, mip->mi_name, int, grp->mrg_index); return (grp); } /* * mac_rx_release_group() * * This is called when there are no clients left for the group. * The group is stopped and marked MAC_GROUP_STATE_REGISTERED, * and if it is a non default group, the shares are removed and * all rings are assigned back to default group. */ void mac_release_rx_group(mac_client_impl_t *mcip, mac_group_t *group) { mac_impl_t *mip = mcip->mci_mip; mac_ring_t *ring; ASSERT(group != MAC_DEFAULT_RX_GROUP(mip)); if (mip->mi_rx_donor_grp == group) mip->mi_rx_donor_grp = MAC_DEFAULT_RX_GROUP(mip); /* * This is the case where there are no clients left. Any * SRS etc on this group have also be quiesced. */ for (ring = group->mrg_rings; ring != NULL; ring = ring->mr_next) { if (ring->mr_classify_type == MAC_HW_CLASSIFIER) { ASSERT(group->mrg_state == MAC_GROUP_STATE_RESERVED); /* * Remove the SRS associated with the HW ring. * As a result, polling will be disabled. */ ring->mr_srs = NULL; } ASSERT(group->mrg_state < MAC_GROUP_STATE_RESERVED || ring->mr_state == MR_INUSE); if (ring->mr_state == MR_INUSE) { mac_stop_ring(ring); ring->mr_flag = 0; } } /* remove group from share */ if (mcip->mci_share != 0) { mip->mi_share_capab.ms_sremove(mcip->mci_share, group->mrg_driver); } if (mip->mi_rx_group_type == MAC_GROUP_TYPE_DYNAMIC) { mac_ring_t *ring; /* * Rings were dynamically allocated to group. * Move rings back to default group. */ while ((ring = group->mrg_rings) != NULL) { (void) mac_group_mov_ring(mip, mip->mi_rx_donor_grp, ring); } } mac_stop_group(group); /* * Possible improvement: See if we can assign the group just released * to a another client of the mip */ } /* * When we move the primary's mac address between groups, we need to also * take all the clients sharing the same mac address along with it (VLANs) * We remove the mac address for such clients from the group after quiescing * them. When we add the mac address we restart the client. Note that * the primary's mac address is removed from the group after all the * other clients sharing the address are removed. Similarly, the primary's * mac address is added before all the other client's mac address are * added. While grp is the group where the clients reside, tgrp is * the group where the addresses have to be added. */ static void mac_rx_move_macaddr_prim(mac_client_impl_t *mcip, mac_group_t *grp, mac_group_t *tgrp, uint8_t *maddr, boolean_t add) { mac_impl_t *mip = mcip->mci_mip; mac_grp_client_t *mgcp = grp->mrg_clients; mac_client_impl_t *gmcip; boolean_t prim; prim = (mcip->mci_state_flags & MCIS_UNICAST_HW) != 0; /* * If the clients are in a non-default group, we just have to * walk the group's client list. If it is in the default group * (which will be shared by other clients as well, we need to * check if the unicast address matches mcip's unicast. */ while (mgcp != NULL) { gmcip = mgcp->mgc_client; if (gmcip != mcip && (grp != MAC_DEFAULT_RX_GROUP(mip) || mcip->mci_unicast == gmcip->mci_unicast)) { if (!add) { mac_rx_client_quiesce( (mac_client_handle_t)gmcip); (void) mac_remove_macaddr(mcip->mci_unicast); } else { (void) mac_add_macaddr(mip, tgrp, maddr, prim); mac_rx_client_restart( (mac_client_handle_t)gmcip); } } mgcp = mgcp->mgc_next; } } /* * Move the MAC address from fgrp to tgrp. If this is the primary client, * we need to take any VLANs etc. together too. */ static int mac_rx_move_macaddr(mac_client_impl_t *mcip, mac_group_t *fgrp, mac_group_t *tgrp) { mac_impl_t *mip = mcip->mci_mip; uint8_t maddr[MAXMACADDRLEN]; int err = 0; boolean_t prim; boolean_t multiclnt = B_FALSE; mac_rx_client_quiesce((mac_client_handle_t)mcip); ASSERT(mcip->mci_unicast != NULL); bcopy(mcip->mci_unicast->ma_addr, maddr, mcip->mci_unicast->ma_len); prim = (mcip->mci_state_flags & MCIS_UNICAST_HW) != 0; if (mcip->mci_unicast->ma_nusers > 1) { mac_rx_move_macaddr_prim(mcip, fgrp, NULL, maddr, B_FALSE); multiclnt = B_TRUE; } ASSERT(mcip->mci_unicast->ma_nusers == 1); err = mac_remove_macaddr(mcip->mci_unicast); if (err != 0) { mac_rx_client_restart((mac_client_handle_t)mcip); if (multiclnt) { mac_rx_move_macaddr_prim(mcip, fgrp, fgrp, maddr, B_TRUE); } return (err); } /* * Program the H/W Classifier first, if this fails we need * not proceed with the other stuff. */ if ((err = mac_add_macaddr(mip, tgrp, maddr, prim)) != 0) { /* Revert back the H/W Classifier */ if ((err = mac_add_macaddr(mip, fgrp, maddr, prim)) != 0) { /* * This should not fail now since it worked earlier, * should we panic? */ cmn_err(CE_WARN, "mac_rx_switch_group: switching %p back" " to group %p failed!!", (void *)mcip, (void *)fgrp); } mac_rx_client_restart((mac_client_handle_t)mcip); if (multiclnt) { mac_rx_move_macaddr_prim(mcip, fgrp, fgrp, maddr, B_TRUE); } return (err); } mcip->mci_unicast = mac_find_macaddr(mip, maddr); mac_rx_client_restart((mac_client_handle_t)mcip); if (multiclnt) mac_rx_move_macaddr_prim(mcip, fgrp, tgrp, maddr, B_TRUE); return (err); } /* * Switch the MAC client from one group to another. This means we need * to remove the MAC address from the group, remove the MAC client, * teardown the SRSs and revert the group state. Then, we add the client * to the destination group, set the SRSs, and add the MAC address to the * group. */ int mac_rx_switch_group(mac_client_impl_t *mcip, mac_group_t *fgrp, mac_group_t *tgrp) { int err; mac_group_state_t next_state; mac_client_impl_t *group_only_mcip; mac_client_impl_t *gmcip; mac_impl_t *mip = mcip->mci_mip; mac_grp_client_t *mgcp; ASSERT(fgrp == mcip->mci_flent->fe_rx_ring_group); if ((err = mac_rx_move_macaddr(mcip, fgrp, tgrp)) != 0) return (err); /* * The group might be reserved, but SRSs may not be set up, e.g. * primary and its vlans using a reserved group. */ if (fgrp->mrg_state == MAC_GROUP_STATE_RESERVED && MAC_GROUP_ONLY_CLIENT(fgrp) != NULL) { mac_rx_srs_group_teardown(mcip->mci_flent, B_TRUE); } if (fgrp != MAC_DEFAULT_RX_GROUP(mip)) { mgcp = fgrp->mrg_clients; while (mgcp != NULL) { gmcip = mgcp->mgc_client; mgcp = mgcp->mgc_next; mac_group_remove_client(fgrp, gmcip); mac_group_add_client(tgrp, gmcip); gmcip->mci_flent->fe_rx_ring_group = tgrp; } mac_release_rx_group(mcip, fgrp); ASSERT(MAC_GROUP_NO_CLIENT(fgrp)); mac_set_group_state(fgrp, MAC_GROUP_STATE_REGISTERED); } else { mac_group_remove_client(fgrp, mcip); mac_group_add_client(tgrp, mcip); mcip->mci_flent->fe_rx_ring_group = tgrp; /* * If there are other clients (VLANs) sharing this address * we should be here only for the primary. */ if (mcip->mci_unicast->ma_nusers > 1) { /* * We need to move all the clients that are using * this h/w address. */ mgcp = fgrp->mrg_clients; while (mgcp != NULL) { gmcip = mgcp->mgc_client; mgcp = mgcp->mgc_next; if (mcip->mci_unicast == gmcip->mci_unicast) { mac_group_remove_client(fgrp, gmcip); mac_group_add_client(tgrp, gmcip); gmcip->mci_flent->fe_rx_ring_group = tgrp; } } } /* * The default group will still take the multicast, * broadcast traffic etc., so it won't go to * MAC_GROUP_STATE_REGISTERED. */ if (fgrp->mrg_state == MAC_GROUP_STATE_RESERVED) mac_rx_group_unmark(fgrp, MR_CONDEMNED); mac_set_group_state(fgrp, MAC_GROUP_STATE_SHARED); } next_state = mac_group_next_state(tgrp, &group_only_mcip, MAC_DEFAULT_RX_GROUP(mip), B_TRUE); mac_set_group_state(tgrp, next_state); /* * If the destination group is reserved, setup the SRSs etc. */ if (tgrp->mrg_state == MAC_GROUP_STATE_RESERVED) { mac_rx_srs_group_setup(mcip, mcip->mci_flent, SRST_LINK); mac_fanout_setup(mcip, mcip->mci_flent, MCIP_RESOURCE_PROPS(mcip), mac_rx_deliver, mcip, NULL, NULL); mac_rx_group_unmark(tgrp, MR_INCIPIENT); } else { mac_rx_switch_grp_to_sw(tgrp); } return (0); } /* * Reserves a TX group for the specified share. Invoked by mac_tx_srs_setup() * when a share was allocated to the client. */ mac_group_t * mac_reserve_tx_group(mac_client_impl_t *mcip, boolean_t move) { mac_impl_t *mip = mcip->mci_mip; mac_group_t *grp = NULL; int rv; int i; int err; mac_group_t *defgrp; mac_share_handle_t share = mcip->mci_share; mac_resource_props_t *mrp = MCIP_RESOURCE_PROPS(mcip); int nrings; int defnrings; boolean_t need_exclgrp = B_FALSE; int need_rings = 0; mac_group_t *candidate_grp = NULL; mac_client_impl_t *gclient; mac_resource_props_t *gmrp; boolean_t txhw = mrp->mrp_mask & MRP_TX_RINGS; boolean_t unspec = mrp->mrp_mask & MRP_TXRINGS_UNSPEC; boolean_t isprimary; isprimary = mcip->mci_flent->fe_type & FLOW_PRIMARY_MAC; /* * When we come here for a VLAN on the primary (dladm create-vlan), * we need to pair it along with the primary (to keep it consistent * with the RX side). So, we check if the primary is already assigned * to a group and return the group if so. The other way is also * true, i.e. the VLAN is already created and now we are plumbing * the primary. */ if (!move && isprimary) { for (gclient = mip->mi_clients_list; gclient != NULL; gclient = gclient->mci_client_next) { if (gclient->mci_flent->fe_type & FLOW_PRIMARY_MAC && gclient->mci_flent->fe_tx_ring_group != NULL) { return (gclient->mci_flent->fe_tx_ring_group); } } } if (mip->mi_tx_groups == NULL || mip->mi_tx_group_count == 0) return (NULL); /* For dynamic groups, default unspec to 1 */ if (txhw && unspec && mip->mi_tx_group_type == MAC_GROUP_TYPE_DYNAMIC) { mrp->mrp_ntxrings = 1; } /* * For static grouping we allow only specifying rings=0 and * unspecified */ if (txhw && mrp->mrp_ntxrings > 0 && mip->mi_tx_group_type == MAC_GROUP_TYPE_STATIC) { return (NULL); } if (txhw) { /* * We have explicitly asked for a group (with ntxrings, * if unspec). */ if (unspec || mrp->mrp_ntxrings > 0) { need_exclgrp = B_TRUE; need_rings = mrp->mrp_ntxrings; } else if (mrp->mrp_ntxrings == 0) { /* * We have asked for a software group. */ return (NULL); } } defgrp = MAC_DEFAULT_TX_GROUP(mip); /* * The number of rings that the default group can donate. * We need to leave at least one ring - the default ring - in * this group. */ defnrings = defgrp->mrg_cur_count - 1; /* * Primary gets default group unless explicitly told not * to (i.e. rings > 0). */ if (isprimary && !need_exclgrp) return (NULL); nrings = (mrp->mrp_mask & MRP_TX_RINGS) != 0 ? mrp->mrp_ntxrings : 1; for (i = 0; i < mip->mi_tx_group_count; i++) { grp = &mip->mi_tx_groups[i]; if ((grp->mrg_state == MAC_GROUP_STATE_RESERVED) || (grp->mrg_state == MAC_GROUP_STATE_UNINIT)) { /* * Select a candidate for replacement if we don't * get an exclusive group. A candidate group is one * that didn't ask for an exclusive group, but got * one and it has enough rings (combined with what * the default group can donate) for the new MAC * client. */ if (grp->mrg_state == MAC_GROUP_STATE_RESERVED && candidate_grp == NULL) { gclient = MAC_GROUP_ONLY_CLIENT(grp); if (gclient == NULL) gclient = mac_get_grp_primary(grp); gmrp = MCIP_RESOURCE_PROPS(gclient); if (gclient->mci_share == 0 && (gmrp->mrp_mask & MRP_TX_RINGS) == 0 && (unspec || (grp->mrg_cur_count + defnrings) >= need_rings)) { candidate_grp = grp; } } continue; } /* * If the default can't donate let's just walk and * see if someone can vacate a group, so that we have * enough rings for this. */ if (mip->mi_tx_group_type != MAC_GROUP_TYPE_DYNAMIC || nrings <= defnrings) { if (grp->mrg_state == MAC_GROUP_STATE_REGISTERED) { rv = mac_start_group(grp); ASSERT(rv == 0); } break; } } /* The default group */ if (i >= mip->mi_tx_group_count) { /* * If we need an exclusive group and have identified a * candidate group we switch the MAC client from the * candidate group to the default group and give the * candidate group to this client. */ if (need_exclgrp && candidate_grp != NULL) { /* * Switch the MAC client from the candidate group * to the default group. */ grp = candidate_grp; gclient = MAC_GROUP_ONLY_CLIENT(grp); if (gclient == NULL) gclient = mac_get_grp_primary(grp); mac_tx_client_quiesce((mac_client_handle_t)gclient); mac_tx_switch_group(gclient, grp, defgrp); mac_tx_client_restart((mac_client_handle_t)gclient); /* * Give the candidate group with the specified number * of rings to this MAC client. */ ASSERT(grp->mrg_state == MAC_GROUP_STATE_REGISTERED); rv = mac_start_group(grp); ASSERT(rv == 0); if (mip->mi_tx_group_type != MAC_GROUP_TYPE_DYNAMIC) return (grp); ASSERT(grp->mrg_cur_count == 0); ASSERT(defgrp->mrg_cur_count > need_rings); err = i_mac_group_allocate_rings(mip, MAC_RING_TYPE_TX, defgrp, grp, share, need_rings); if (err == 0) { /* * For a share i_mac_group_allocate_rings gets * the rings from the driver, let's populate * the property for the client now. */ if (share != 0) { mac_client_set_rings( (mac_client_handle_t)mcip, -1, grp->mrg_cur_count); } mip->mi_tx_group_free--; return (grp); } DTRACE_PROBE3(tx__group__reserve__alloc__rings, char *, mip->mi_name, int, grp->mrg_index, int, err); mac_stop_group(grp); } return (NULL); } /* * We got an exclusive group, but it is not dynamic. */ if (mip->mi_tx_group_type != MAC_GROUP_TYPE_DYNAMIC) { mip->mi_tx_group_free--; return (grp); } rv = i_mac_group_allocate_rings(mip, MAC_RING_TYPE_TX, defgrp, grp, share, nrings); if (rv != 0) { DTRACE_PROBE3(tx__group__reserve__alloc__rings, char *, mip->mi_name, int, grp->mrg_index, int, rv); mac_stop_group(grp); return (NULL); } /* * For a share i_mac_group_allocate_rings gets the rings from the * driver, let's populate the property for the client now. */ if (share != 0) { mac_client_set_rings((mac_client_handle_t)mcip, -1, grp->mrg_cur_count); } mip->mi_tx_group_free--; return (grp); } void mac_release_tx_group(mac_client_impl_t *mcip, mac_group_t *grp) { mac_impl_t *mip = mcip->mci_mip; mac_share_handle_t share = mcip->mci_share; mac_ring_t *ring; mac_soft_ring_set_t *srs = MCIP_TX_SRS(mcip); mac_group_t *defgrp; defgrp = MAC_DEFAULT_TX_GROUP(mip); if (srs != NULL) { if (srs->srs_soft_ring_count > 0) { for (ring = grp->mrg_rings; ring != NULL; ring = ring->mr_next) { ASSERT(mac_tx_srs_ring_present(srs, ring)); mac_tx_invoke_callbacks(mcip, (mac_tx_cookie_t) mac_tx_srs_get_soft_ring(srs, ring)); mac_tx_srs_del_ring(srs, ring); } } else { ASSERT(srs->srs_tx.st_arg2 != NULL); srs->srs_tx.st_arg2 = NULL; mac_srs_stat_delete(srs); } } if (share != 0) mip->mi_share_capab.ms_sremove(share, grp->mrg_driver); /* move the ring back to the pool */ if (mip->mi_tx_group_type == MAC_GROUP_TYPE_DYNAMIC) { while ((ring = grp->mrg_rings) != NULL) (void) mac_group_mov_ring(mip, defgrp, ring); } mac_stop_group(grp); mip->mi_tx_group_free++; } /* * Disassociate a MAC client from a group, i.e go through the rings in the * group and delete all the soft rings tied to them. */ static void mac_tx_dismantle_soft_rings(mac_group_t *fgrp, flow_entry_t *flent) { mac_client_impl_t *mcip = flent->fe_mcip; mac_soft_ring_set_t *tx_srs; mac_srs_tx_t *tx; mac_ring_t *ring; tx_srs = flent->fe_tx_srs; tx = &tx_srs->srs_tx; /* Single ring case we haven't created any soft rings */ if (tx->st_mode == SRS_TX_BW || tx->st_mode == SRS_TX_SERIALIZE || tx->st_mode == SRS_TX_DEFAULT) { tx->st_arg2 = NULL; mac_srs_stat_delete(tx_srs); /* Fanout case, where we have to dismantle the soft rings */ } else { for (ring = fgrp->mrg_rings; ring != NULL; ring = ring->mr_next) { ASSERT(mac_tx_srs_ring_present(tx_srs, ring)); mac_tx_invoke_callbacks(mcip, (mac_tx_cookie_t)mac_tx_srs_get_soft_ring(tx_srs, ring)); mac_tx_srs_del_ring(tx_srs, ring); } ASSERT(tx->st_arg2 == NULL); } } /* * Switch the MAC client from one group to another. This means we need * to remove the MAC client, teardown the SRSs and revert the group state. * Then, we add the client to the destination roup, set the SRSs etc. */ void mac_tx_switch_group(mac_client_impl_t *mcip, mac_group_t *fgrp, mac_group_t *tgrp) { mac_client_impl_t *group_only_mcip; mac_impl_t *mip = mcip->mci_mip; flow_entry_t *flent = mcip->mci_flent; mac_group_t *defgrp; mac_grp_client_t *mgcp; mac_client_impl_t *gmcip; flow_entry_t *gflent; defgrp = MAC_DEFAULT_TX_GROUP(mip); ASSERT(fgrp == flent->fe_tx_ring_group); if (fgrp == defgrp) { /* * If this is the primary we need to find any VLANs on * the primary and move them too. */ mac_group_remove_client(fgrp, mcip); mac_tx_dismantle_soft_rings(fgrp, flent); if (mcip->mci_unicast->ma_nusers > 1) { mgcp = fgrp->mrg_clients; while (mgcp != NULL) { gmcip = mgcp->mgc_client; mgcp = mgcp->mgc_next; if (mcip->mci_unicast != gmcip->mci_unicast) continue; mac_tx_client_quiesce( (mac_client_handle_t)gmcip); gflent = gmcip->mci_flent; mac_group_remove_client(fgrp, gmcip); mac_tx_dismantle_soft_rings(fgrp, gflent); mac_group_add_client(tgrp, gmcip); gflent->fe_tx_ring_group = tgrp; /* We could directly set this to SHARED */ tgrp->mrg_state = mac_group_next_state(tgrp, &group_only_mcip, defgrp, B_FALSE); mac_tx_srs_group_setup(gmcip, gflent, SRST_LINK); mac_fanout_setup(gmcip, gflent, MCIP_RESOURCE_PROPS(gmcip), mac_rx_deliver, gmcip, NULL, NULL); mac_tx_client_restart( (mac_client_handle_t)gmcip); } } if (MAC_GROUP_NO_CLIENT(fgrp)) { mac_ring_t *ring; int cnt; int ringcnt; fgrp->mrg_state = MAC_GROUP_STATE_REGISTERED; /* * Additionally, we also need to stop all * the rings in the default group, except * the default ring. The reason being * this group won't be released since it is * the default group, so the rings won't * be stopped otherwise. */ ringcnt = fgrp->mrg_cur_count; ring = fgrp->mrg_rings; for (cnt = 0; cnt < ringcnt; cnt++) { if (ring->mr_state == MR_INUSE && ring != (mac_ring_t *)mip->mi_default_tx_ring) { mac_stop_ring(ring); ring->mr_flag = 0; } ring = ring->mr_next; } } else if (MAC_GROUP_ONLY_CLIENT(fgrp) != NULL) { fgrp->mrg_state = MAC_GROUP_STATE_RESERVED; } else { ASSERT(fgrp->mrg_state == MAC_GROUP_STATE_SHARED); } } else { /* * We could have VLANs sharing the non-default group with * the primary. */ mgcp = fgrp->mrg_clients; while (mgcp != NULL) { gmcip = mgcp->mgc_client; mgcp = mgcp->mgc_next; if (gmcip == mcip) continue; mac_tx_client_quiesce((mac_client_handle_t)gmcip); gflent = gmcip->mci_flent; mac_group_remove_client(fgrp, gmcip); mac_tx_dismantle_soft_rings(fgrp, gflent); mac_group_add_client(tgrp, gmcip); gflent->fe_tx_ring_group = tgrp; /* We could directly set this to SHARED */ tgrp->mrg_state = mac_group_next_state(tgrp, &group_only_mcip, defgrp, B_FALSE); mac_tx_srs_group_setup(gmcip, gflent, SRST_LINK); mac_fanout_setup(gmcip, gflent, MCIP_RESOURCE_PROPS(gmcip), mac_rx_deliver, gmcip, NULL, NULL); mac_tx_client_restart((mac_client_handle_t)gmcip); } mac_group_remove_client(fgrp, mcip); mac_release_tx_group(mcip, fgrp); fgrp->mrg_state = MAC_GROUP_STATE_REGISTERED; } /* Add it to the tgroup */ mac_group_add_client(tgrp, mcip); flent->fe_tx_ring_group = tgrp; tgrp->mrg_state = mac_group_next_state(tgrp, &group_only_mcip, defgrp, B_FALSE); mac_tx_srs_group_setup(mcip, flent, SRST_LINK); mac_fanout_setup(mcip, flent, MCIP_RESOURCE_PROPS(mcip), mac_rx_deliver, mcip, NULL, NULL); } /* * This is a 1-time control path activity initiated by the client (IP). * The mac perimeter protects against other simultaneous control activities, * for example an ioctl that attempts to change the degree of fanout and * increase or decrease the number of softrings associated with this Tx SRS. */ static mac_tx_notify_cb_t * mac_client_tx_notify_add(mac_client_impl_t *mcip, mac_tx_notify_t notify, void *arg) { mac_cb_info_t *mcbi; mac_tx_notify_cb_t *mtnfp; ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip)); mtnfp = kmem_zalloc(sizeof (mac_tx_notify_cb_t), KM_SLEEP); mtnfp->mtnf_fn = notify; mtnfp->mtnf_arg = arg; mtnfp->mtnf_link.mcb_objp = mtnfp; mtnfp->mtnf_link.mcb_objsize = sizeof (mac_tx_notify_cb_t); mtnfp->mtnf_link.mcb_flags = MCB_TX_NOTIFY_CB_T; mcbi = &mcip->mci_tx_notify_cb_info; mutex_enter(mcbi->mcbi_lockp); mac_callback_add(mcbi, &mcip->mci_tx_notify_cb_list, &mtnfp->mtnf_link); mutex_exit(mcbi->mcbi_lockp); return (mtnfp); } static void mac_client_tx_notify_remove(mac_client_impl_t *mcip, mac_tx_notify_cb_t *mtnfp) { mac_cb_info_t *mcbi; mac_cb_t **cblist; ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip)); if (!mac_callback_find(&mcip->mci_tx_notify_cb_info, &mcip->mci_tx_notify_cb_list, &mtnfp->mtnf_link)) { cmn_err(CE_WARN, "mac_client_tx_notify_remove: callback not " "found, mcip 0x%p mtnfp 0x%p", (void *)mcip, (void *)mtnfp); return; } mcbi = &mcip->mci_tx_notify_cb_info; cblist = &mcip->mci_tx_notify_cb_list; mutex_enter(mcbi->mcbi_lockp); if (mac_callback_remove(mcbi, cblist, &mtnfp->mtnf_link)) kmem_free(mtnfp, sizeof (mac_tx_notify_cb_t)); else mac_callback_remove_wait(&mcip->mci_tx_notify_cb_info); mutex_exit(mcbi->mcbi_lockp); } /* * mac_client_tx_notify(): * call to add and remove flow control callback routine. */ mac_tx_notify_handle_t mac_client_tx_notify(mac_client_handle_t mch, mac_tx_notify_t callb_func, void *ptr) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_tx_notify_cb_t *mtnfp = NULL; i_mac_perim_enter(mcip->mci_mip); if (callb_func != NULL) { /* Add a notify callback */ mtnfp = mac_client_tx_notify_add(mcip, callb_func, ptr); } else { mac_client_tx_notify_remove(mcip, (mac_tx_notify_cb_t *)ptr); } i_mac_perim_exit(mcip->mci_mip); return ((mac_tx_notify_handle_t)mtnfp); } void mac_bridge_vectors(mac_bridge_tx_t txf, mac_bridge_rx_t rxf, mac_bridge_ref_t reff, mac_bridge_ls_t lsf) { mac_bridge_tx_cb = txf; mac_bridge_rx_cb = rxf; mac_bridge_ref_cb = reff; mac_bridge_ls_cb = lsf; } int mac_bridge_set(mac_handle_t mh, mac_handle_t link) { mac_impl_t *mip = (mac_impl_t *)mh; int retv; mutex_enter(&mip->mi_bridge_lock); if (mip->mi_bridge_link == NULL) { mip->mi_bridge_link = link; retv = 0; } else { retv = EBUSY; } mutex_exit(&mip->mi_bridge_lock); if (retv == 0) { mac_poll_state_change(mh, B_FALSE); mac_capab_update(mh); } return (retv); } /* * Disable bridging on the indicated link. */ void mac_bridge_clear(mac_handle_t mh, mac_handle_t link) { mac_impl_t *mip = (mac_impl_t *)mh; mutex_enter(&mip->mi_bridge_lock); ASSERT(mip->mi_bridge_link == link); mip->mi_bridge_link = NULL; mutex_exit(&mip->mi_bridge_lock); mac_poll_state_change(mh, B_TRUE); mac_capab_update(mh); } void mac_no_active(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; i_mac_perim_enter(mip); mip->mi_state_flags |= MIS_NO_ACTIVE; i_mac_perim_exit(mip); } /* * Walk the primary VLAN clients whenever the primary's rings property * changes and update the mac_resource_props_t for the VLAN's client. * We need to do this since we don't support setting these properties * on the primary's VLAN clients, but the VLAN clients have to * follow the primary w.r.t the rings property; */ void mac_set_prim_vlan_rings(mac_impl_t *mip, mac_resource_props_t *mrp) { mac_client_impl_t *vmcip; mac_resource_props_t *vmrp; for (vmcip = mip->mi_clients_list; vmcip != NULL; vmcip = vmcip->mci_client_next) { if (!(vmcip->mci_flent->fe_type & FLOW_PRIMARY_MAC) || mac_client_vid((mac_client_handle_t)vmcip) == VLAN_ID_NONE) { continue; } vmrp = MCIP_RESOURCE_PROPS(vmcip); vmrp->mrp_nrxrings = mrp->mrp_nrxrings; if (mrp->mrp_mask & MRP_RX_RINGS) vmrp->mrp_mask |= MRP_RX_RINGS; else if (vmrp->mrp_mask & MRP_RX_RINGS) vmrp->mrp_mask &= ~MRP_RX_RINGS; vmrp->mrp_ntxrings = mrp->mrp_ntxrings; if (mrp->mrp_mask & MRP_TX_RINGS) vmrp->mrp_mask |= MRP_TX_RINGS; else if (vmrp->mrp_mask & MRP_TX_RINGS) vmrp->mrp_mask &= ~MRP_TX_RINGS; if (mrp->mrp_mask & MRP_RXRINGS_UNSPEC) vmrp->mrp_mask |= MRP_RXRINGS_UNSPEC; else vmrp->mrp_mask &= ~MRP_RXRINGS_UNSPEC; if (mrp->mrp_mask & MRP_TXRINGS_UNSPEC) vmrp->mrp_mask |= MRP_TXRINGS_UNSPEC; else vmrp->mrp_mask &= ~MRP_TXRINGS_UNSPEC; } } /* * We are adding or removing ring(s) from a group. The source for taking * rings is the default group. The destination for giving rings back is * the default group. */ int mac_group_ring_modify(mac_client_impl_t *mcip, mac_group_t *group, mac_group_t *defgrp) { mac_resource_props_t *mrp = MCIP_RESOURCE_PROPS(mcip); uint_t modify; int count; mac_ring_t *ring; mac_ring_t *next; mac_impl_t *mip = mcip->mci_mip; mac_ring_t **rings; uint_t ringcnt; int i = 0; boolean_t rx_group = group->mrg_type == MAC_RING_TYPE_RX; int start; int end; mac_group_t *tgrp; int j; int rv = 0; /* * If we are asked for just a group, we give 1 ring, else * the specified number of rings. */ if (rx_group) { ringcnt = (mrp->mrp_mask & MRP_RXRINGS_UNSPEC) ? 1: mrp->mrp_nrxrings; } else { ringcnt = (mrp->mrp_mask & MRP_TXRINGS_UNSPEC) ? 1: mrp->mrp_ntxrings; } /* don't allow modifying rings for a share for now. */ ASSERT(mcip->mci_share == 0); if (ringcnt == group->mrg_cur_count) return (0); if (group->mrg_cur_count > ringcnt) { modify = group->mrg_cur_count - ringcnt; if (rx_group) { if (mip->mi_rx_donor_grp == group) { ASSERT(mac_is_primary_client(mcip)); mip->mi_rx_donor_grp = defgrp; } else { defgrp = mip->mi_rx_donor_grp; } } ring = group->mrg_rings; rings = kmem_alloc(modify * sizeof (mac_ring_handle_t), KM_SLEEP); j = 0; for (count = 0; count < modify; count++) { next = ring->mr_next; rv = mac_group_mov_ring(mip, defgrp, ring); if (rv != 0) { /* cleanup on failure */ for (j = 0; j < count; j++) { (void) mac_group_mov_ring(mip, group, rings[j]); } break; } rings[j++] = ring; ring = next; } kmem_free(rings, modify * sizeof (mac_ring_handle_t)); return (rv); } if (ringcnt >= MAX_RINGS_PER_GROUP) return (EINVAL); modify = ringcnt - group->mrg_cur_count; if (rx_group) { if (group != mip->mi_rx_donor_grp) defgrp = mip->mi_rx_donor_grp; else /* * This is the donor group with all the remaining * rings. Default group now gets to be the donor */ mip->mi_rx_donor_grp = defgrp; start = 1; end = mip->mi_rx_group_count; } else { start = 0; end = mip->mi_tx_group_count - 1; } /* * If the default doesn't have any rings, lets see if we can * take rings given to an h/w client that doesn't need it. * For now, we just see if there is any one client that can donate * all the required rings. */ if (defgrp->mrg_cur_count < (modify + 1)) { for (i = start; i < end; i++) { if (rx_group) { tgrp = &mip->mi_rx_groups[i]; if (tgrp == group || tgrp->mrg_state < MAC_GROUP_STATE_RESERVED) { continue; } mcip = MAC_GROUP_ONLY_CLIENT(tgrp); if (mcip == NULL) mcip = mac_get_grp_primary(tgrp); ASSERT(mcip != NULL); mrp = MCIP_RESOURCE_PROPS(mcip); if ((mrp->mrp_mask & MRP_RX_RINGS) != 0) continue; if ((tgrp->mrg_cur_count + defgrp->mrg_cur_count) < (modify + 1)) { continue; } if (mac_rx_switch_group(mcip, tgrp, defgrp) != 0) { return (ENOSPC); } } else { tgrp = &mip->mi_tx_groups[i]; if (tgrp == group || tgrp->mrg_state < MAC_GROUP_STATE_RESERVED) { continue; } mcip = MAC_GROUP_ONLY_CLIENT(tgrp); if (mcip == NULL) mcip = mac_get_grp_primary(tgrp); mrp = MCIP_RESOURCE_PROPS(mcip); if ((mrp->mrp_mask & MRP_TX_RINGS) != 0) continue; if ((tgrp->mrg_cur_count + defgrp->mrg_cur_count) < (modify + 1)) { continue; } /* OK, we can switch this to s/w */ mac_tx_client_quiesce( (mac_client_handle_t)mcip); mac_tx_switch_group(mcip, tgrp, defgrp); mac_tx_client_restart( (mac_client_handle_t)mcip); } } if (defgrp->mrg_cur_count < (modify + 1)) return (ENOSPC); } if ((rv = i_mac_group_allocate_rings(mip, group->mrg_type, defgrp, group, mcip->mci_share, modify)) != 0) { return (rv); } return (0); } /* * Given the poolname in mac_resource_props, find the cpupart * that is associated with this pool. The cpupart will be used * later for finding the cpus to be bound to the networking threads. * * use_default is set B_TRUE if pools are enabled and pool_default * is returned. This avoids a 2nd lookup to set the poolname * for pool-effective. * * returns: * * NULL - pools are disabled or if the 'cpus' property is set. * cpupart of pool_default - pools are enabled and the pool * is not available or poolname is blank * cpupart of named pool - pools are enabled and the pool * is available. */ cpupart_t * mac_pset_find(mac_resource_props_t *mrp, boolean_t *use_default) { pool_t *pool; cpupart_t *cpupart; *use_default = B_FALSE; /* CPUs property is set */ if (mrp->mrp_mask & MRP_CPUS) return (NULL); ASSERT(pool_lock_held()); /* Pools are disabled, no pset */ if (pool_state == POOL_DISABLED) return (NULL); /* Pools property is set */ if (mrp->mrp_mask & MRP_POOL) { if ((pool = pool_lookup_pool_by_name(mrp->mrp_pool)) == NULL) { /* Pool not found */ DTRACE_PROBE1(mac_pset_find_no_pool, char *, mrp->mrp_pool); *use_default = B_TRUE; pool = pool_default; } /* Pools property is not set */ } else { *use_default = B_TRUE; pool = pool_default; } /* Find the CPU pset that corresponds to the pool */ mutex_enter(&cpu_lock); if ((cpupart = cpupart_find(pool->pool_pset->pset_id)) == NULL) { DTRACE_PROBE1(mac_find_pset_no_pset, psetid_t, pool->pool_pset->pset_id); } mutex_exit(&cpu_lock); return (cpupart); } void mac_set_pool_effective(boolean_t use_default, cpupart_t *cpupart, mac_resource_props_t *mrp, mac_resource_props_t *emrp) { ASSERT(pool_lock_held()); if (cpupart != NULL) { emrp->mrp_mask |= MRP_POOL; if (use_default) { (void) strcpy(emrp->mrp_pool, "pool_default"); } else { ASSERT(strlen(mrp->mrp_pool) != 0); (void) strcpy(emrp->mrp_pool, mrp->mrp_pool); } } else { emrp->mrp_mask &= ~MRP_POOL; bzero(emrp->mrp_pool, MAXPATHLEN); } } struct mac_pool_arg { char mpa_poolname[MAXPATHLEN]; pool_event_t mpa_what; }; /*ARGSUSED*/ static uint_t mac_pool_link_update(mod_hash_key_t key, mod_hash_val_t *val, void *arg) { struct mac_pool_arg *mpa = arg; mac_impl_t *mip = (mac_impl_t *)val; mac_client_impl_t *mcip; mac_resource_props_t *mrp, *emrp; boolean_t pool_update = B_FALSE; boolean_t pool_clear = B_FALSE; boolean_t use_default = B_FALSE; cpupart_t *cpupart = NULL; mrp = kmem_zalloc(sizeof (*mrp), KM_SLEEP); i_mac_perim_enter(mip); for (mcip = mip->mi_clients_list; mcip != NULL; mcip = mcip->mci_client_next) { pool_update = B_FALSE; pool_clear = B_FALSE; use_default = B_FALSE; mac_client_get_resources((mac_client_handle_t)mcip, mrp); emrp = MCIP_EFFECTIVE_PROPS(mcip); /* * When pools are enabled */ if ((mpa->mpa_what == POOL_E_ENABLE) && ((mrp->mrp_mask & MRP_CPUS) == 0)) { mrp->mrp_mask |= MRP_POOL; pool_update = B_TRUE; } /* * When pools are disabled */ if ((mpa->mpa_what == POOL_E_DISABLE) && ((mrp->mrp_mask & MRP_CPUS) == 0)) { mrp->mrp_mask |= MRP_POOL; pool_clear = B_TRUE; } /* * Look for links with the pool property set and the poolname * matching the one which is changing. */ if (strcmp(mrp->mrp_pool, mpa->mpa_poolname) == 0) { /* * The pool associated with the link has changed. */ if (mpa->mpa_what == POOL_E_CHANGE) { mrp->mrp_mask |= MRP_POOL; pool_update = B_TRUE; } } /* * This link is associated with pool_default and * pool_default has changed. */ if ((mpa->mpa_what == POOL_E_CHANGE) && (strcmp(emrp->mrp_pool, "pool_default") == 0) && (strcmp(mpa->mpa_poolname, "pool_default") == 0)) { mrp->mrp_mask |= MRP_POOL; pool_update = B_TRUE; } /* * Get new list of cpus for the pool, bind network * threads to new list of cpus and update resources. */ if (pool_update) { if (MCIP_DATAPATH_SETUP(mcip)) { pool_lock(); cpupart = mac_pset_find(mrp, &use_default); mac_fanout_setup(mcip, mcip->mci_flent, mrp, mac_rx_deliver, mcip, NULL, cpupart); mac_set_pool_effective(use_default, cpupart, mrp, emrp); pool_unlock(); } mac_update_resources(mrp, MCIP_RESOURCE_PROPS(mcip), B_FALSE); } /* * Clear the effective pool and bind network threads * to any available CPU. */ if (pool_clear) { if (MCIP_DATAPATH_SETUP(mcip)) { emrp->mrp_mask &= ~MRP_POOL; bzero(emrp->mrp_pool, MAXPATHLEN); mac_fanout_setup(mcip, mcip->mci_flent, mrp, mac_rx_deliver, mcip, NULL, NULL); } mac_update_resources(mrp, MCIP_RESOURCE_PROPS(mcip), B_FALSE); } } i_mac_perim_exit(mip); kmem_free(mrp, sizeof (*mrp)); return (MH_WALK_CONTINUE); } static void mac_pool_update(void *arg) { mod_hash_walk(i_mac_impl_hash, mac_pool_link_update, arg); kmem_free(arg, sizeof (struct mac_pool_arg)); } /* * Callback function to be executed when a noteworthy pool event * takes place. */ /* ARGSUSED */ static void mac_pool_event_cb(pool_event_t what, poolid_t id, void *arg) { pool_t *pool; char *poolname = NULL; struct mac_pool_arg *mpa; pool_lock(); mpa = kmem_zalloc(sizeof (struct mac_pool_arg), KM_SLEEP); switch (what) { case POOL_E_ENABLE: case POOL_E_DISABLE: break; case POOL_E_CHANGE: pool = pool_lookup_pool_by_id(id); if (pool == NULL) { kmem_free(mpa, sizeof (struct mac_pool_arg)); pool_unlock(); return; } pool_get_name(pool, &poolname); (void) strlcpy(mpa->mpa_poolname, poolname, sizeof (mpa->mpa_poolname)); break; default: kmem_free(mpa, sizeof (struct mac_pool_arg)); pool_unlock(); return; } pool_unlock(); mpa->mpa_what = what; mac_pool_update(mpa); } /* * Set effective rings property. This could be called from datapath_setup/ * datapath_teardown or set-linkprop. * If the group is reserved we just go ahead and set the effective rings. * Additionally, for TX this could mean the default group has lost/gained * some rings, so if the default group is reserved, we need to adjust the * effective rings for the default group clients. For RX, if we are working * with the non-default group, we just need * to reset the effective props * for the default group clients. */ void mac_set_rings_effective(mac_client_impl_t *mcip) { mac_impl_t *mip = mcip->mci_mip; mac_group_t *grp; mac_group_t *defgrp; flow_entry_t *flent = mcip->mci_flent; mac_resource_props_t *emrp = MCIP_EFFECTIVE_PROPS(mcip); mac_grp_client_t *mgcp; mac_client_impl_t *gmcip; grp = flent->fe_rx_ring_group; if (grp != NULL) { defgrp = MAC_DEFAULT_RX_GROUP(mip); /* * If we have reserved a group, set the effective rings * to the ring count in the group. */ if (grp->mrg_state == MAC_GROUP_STATE_RESERVED) { emrp->mrp_mask |= MRP_RX_RINGS; emrp->mrp_nrxrings = grp->mrg_cur_count; } /* * We go through the clients in the shared group and * reset the effective properties. It is possible this * might have already been done for some client (i.e. * if some client is being moved to a group that is * already shared). The case where the default group is * RESERVED is taken care of above (note in the RX side if * there is a non-default group, the default group is always * SHARED). */ if (grp != defgrp || grp->mrg_state == MAC_GROUP_STATE_SHARED) { if (grp->mrg_state == MAC_GROUP_STATE_SHARED) mgcp = grp->mrg_clients; else mgcp = defgrp->mrg_clients; while (mgcp != NULL) { gmcip = mgcp->mgc_client; emrp = MCIP_EFFECTIVE_PROPS(gmcip); if (emrp->mrp_mask & MRP_RX_RINGS) { emrp->mrp_mask &= ~MRP_RX_RINGS; emrp->mrp_nrxrings = 0; } mgcp = mgcp->mgc_next; } } } /* Now the TX side */ grp = flent->fe_tx_ring_group; if (grp != NULL) { defgrp = MAC_DEFAULT_TX_GROUP(mip); if (grp->mrg_state == MAC_GROUP_STATE_RESERVED) { emrp->mrp_mask |= MRP_TX_RINGS; emrp->mrp_ntxrings = grp->mrg_cur_count; } else if (grp->mrg_state == MAC_GROUP_STATE_SHARED) { mgcp = grp->mrg_clients; while (mgcp != NULL) { gmcip = mgcp->mgc_client; emrp = MCIP_EFFECTIVE_PROPS(gmcip); if (emrp->mrp_mask & MRP_TX_RINGS) { emrp->mrp_mask &= ~MRP_TX_RINGS; emrp->mrp_ntxrings = 0; } mgcp = mgcp->mgc_next; } } /* * If the group is not the default group and the default * group is reserved, the ring count in the default group * might have changed, update it. */ if (grp != defgrp && defgrp->mrg_state == MAC_GROUP_STATE_RESERVED) { gmcip = MAC_GROUP_ONLY_CLIENT(defgrp); emrp = MCIP_EFFECTIVE_PROPS(gmcip); emrp->mrp_ntxrings = defgrp->mrg_cur_count; } } emrp = MCIP_EFFECTIVE_PROPS(mcip); } /* * Check if the primary is in the default group. If so, see if we * can give it a an exclusive group now that another client is * being configured. We take the primary out of the default group * because the multicast/broadcast packets for the all the clients * will land in the default ring in the default group which means * any client in the default group, even if it is the only on in * the group, will lose exclusive access to the rings, hence * polling. */ mac_client_impl_t * mac_check_primary_relocation(mac_client_impl_t *mcip, boolean_t rxhw) { mac_impl_t *mip = mcip->mci_mip; mac_group_t *defgrp = MAC_DEFAULT_RX_GROUP(mip); flow_entry_t *flent = mcip->mci_flent; mac_resource_props_t *mrp = MCIP_RESOURCE_PROPS(mcip); uint8_t *mac_addr; mac_group_t *ngrp; /* * Check if the primary is in the default group, if not * or if it is explicitly configured to be in the default * group OR set the RX rings property, return. */ if (flent->fe_rx_ring_group != defgrp || mrp->mrp_mask & MRP_RX_RINGS) return (NULL); /* * If the new client needs an exclusive group and we * don't have another for the primary, return. */ if (rxhw && mip->mi_rxhwclnt_avail < 2) return (NULL); mac_addr = flent->fe_flow_desc.fd_dst_mac; /* * We call this when we are setting up the datapath for * the first non-primary. */ ASSERT(mip->mi_nactiveclients == 2); /* * OK, now we have the primary that needs to be relocated. */ ngrp = mac_reserve_rx_group(mcip, mac_addr, B_TRUE); if (ngrp == NULL) return (NULL); if (mac_rx_switch_group(mcip, defgrp, ngrp) != 0) { mac_stop_group(ngrp); return (NULL); } return (mcip); } void mac_transceiver_init(mac_impl_t *mip) { if (mac_capab_get((mac_handle_t)mip, MAC_CAPAB_TRANSCEIVER, &mip->mi_transceiver)) { /* * The driver set a flag that we don't know about. In this case, * we need to warn about that case and ignore this capability. */ if (mip->mi_transceiver.mct_flags != 0) { dev_err(mip->mi_dip, CE_WARN, "driver set transceiver " "flags to invalid value: 0x%x, ignoring " "capability", mip->mi_transceiver.mct_flags); bzero(&mip->mi_transceiver, sizeof (mac_capab_transceiver_t)); } } else { bzero(&mip->mi_transceiver, sizeof (mac_capab_transceiver_t)); } } int mac_transceiver_count(mac_handle_t mh, uint_t *countp) { mac_impl_t *mip = (mac_impl_t *)mh; ASSERT(MAC_PERIM_HELD(mh)); if (mip->mi_transceiver.mct_ntransceivers == 0) return (ENOTSUP); *countp = mip->mi_transceiver.mct_ntransceivers; return (0); } int mac_transceiver_info(mac_handle_t mh, uint_t tranid, boolean_t *present, boolean_t *usable) { int ret; mac_transceiver_info_t info; mac_impl_t *mip = (mac_impl_t *)mh; ASSERT(MAC_PERIM_HELD(mh)); if (mip->mi_transceiver.mct_info == NULL || mip->mi_transceiver.mct_ntransceivers == 0) return (ENOTSUP); if (tranid >= mip->mi_transceiver.mct_ntransceivers) return (EINVAL); bzero(&info, sizeof (mac_transceiver_info_t)); if ((ret = mip->mi_transceiver.mct_info(mip->mi_driver, tranid, &info)) != 0) { return (ret); } *present = info.mti_present; *usable = info.mti_usable; return (0); } int mac_transceiver_read(mac_handle_t mh, uint_t tranid, uint_t page, void *buf, size_t nbytes, off_t offset, size_t *nread) { int ret; size_t nr; mac_impl_t *mip = (mac_impl_t *)mh; ASSERT(MAC_PERIM_HELD(mh)); if (mip->mi_transceiver.mct_read == NULL) return (ENOTSUP); if (tranid >= mip->mi_transceiver.mct_ntransceivers) return (EINVAL); /* * All supported pages today are 256 bytes wide. Make sure offset + * nbytes never exceeds that. */ if (offset < 0 || offset >= 256 || nbytes > 256 || offset + nbytes > 256) return (EINVAL); if (nread == NULL) nread = &nr; ret = mip->mi_transceiver.mct_read(mip->mi_driver, tranid, page, buf, nbytes, offset, nread); if (ret == 0 && *nread > nbytes) { dev_err(mip->mi_dip, CE_PANIC, "driver wrote %lu bytes into " "%lu byte sized buffer, possible memory corruption", *nread, nbytes); } return (ret); } void mac_led_init(mac_impl_t *mip) { mip->mi_led_modes = MAC_LED_DEFAULT; if (!mac_capab_get((mac_handle_t)mip, MAC_CAPAB_LED, &mip->mi_led)) { bzero(&mip->mi_led, sizeof (mac_capab_led_t)); return; } if (mip->mi_led.mcl_flags != 0) { dev_err(mip->mi_dip, CE_WARN, "driver set led capability " "flags to invalid value: 0x%x, ignoring " "capability", mip->mi_transceiver.mct_flags); bzero(&mip->mi_led, sizeof (mac_capab_led_t)); return; } if ((mip->mi_led.mcl_modes & ~MAC_LED_ALL) != 0) { dev_err(mip->mi_dip, CE_WARN, "driver set led capability " "supported modes to invalid value: 0x%x, ignoring " "capability", mip->mi_transceiver.mct_flags); bzero(&mip->mi_led, sizeof (mac_capab_led_t)); return; } } int mac_led_get(mac_handle_t mh, mac_led_mode_t *supported, mac_led_mode_t *active) { mac_impl_t *mip = (mac_impl_t *)mh; ASSERT(MAC_PERIM_HELD(mh)); if (mip->mi_led.mcl_set == NULL) return (ENOTSUP); *supported = mip->mi_led.mcl_modes; *active = mip->mi_led_modes; return (0); } /* * Update and multiplex the various LED requests. We only ever send one LED to * the underlying driver at a time. As such, we end up multiplexing all * requested states and picking one to send down to the driver. */ int mac_led_set(mac_handle_t mh, mac_led_mode_t desired) { int ret; mac_led_mode_t driver; mac_impl_t *mip = (mac_impl_t *)mh; ASSERT(MAC_PERIM_HELD(mh)); /* * If we've been passed a desired value of zero, that indicates that * we're basically resetting to the value of zero, which is our default * value. */ if (desired == 0) desired = MAC_LED_DEFAULT; if (mip->mi_led.mcl_set == NULL) return (ENOTSUP); /* * Catch both values that we don't know about and those that the driver * doesn't support. */ if ((desired & ~MAC_LED_ALL) != 0) return (EINVAL); if ((desired & ~mip->mi_led.mcl_modes) != 0) return (ENOTSUP); /* * If we have the same value, then there is nothing to do. */ if (desired == mip->mi_led_modes) return (0); /* * Based on the desired value, determine what to send to the driver. We * only will send a single bit to the driver at any given time. IDENT * takes priority over OFF or ON. We also let OFF take priority over the * rest. */ if (desired & MAC_LED_IDENT) { driver = MAC_LED_IDENT; } else if (desired & MAC_LED_OFF) { driver = MAC_LED_OFF; } else if (desired & MAC_LED_ON) { driver = MAC_LED_ON; } else { driver = MAC_LED_DEFAULT; } if ((ret = mip->mi_led.mcl_set(mip->mi_driver, driver, 0)) == 0) { mip->mi_led_modes = desired; } return (ret); }