/*
 * Copyright (c) 2003 Stuart Walsh
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS 'AS IS' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */
/*
 * $FreeBSD: src/sys/dev/bfe/if_bfereg.h,v 1.10.2.4.2.1 2008/11/25 02:59:29
 * kensmith Exp $
 */

#ifndef _BFE_HW_H
#define	_BFE_HW_H

/* PCI registers */
#define	BFE_PCI_MEMLO		0x10
#define	BFE_PCI_MEMHIGH		0x14
#define	BFE_PCI_INTLINE		0x3C

/* Register layout. */
#define	BFE_DEVCTRL		0x00000000  /* Device Control */
#define	BFE_PFE			0x00000080  /* Pattern Filtering Enable */
#define	BFE_IPP			0x00000400  /* Internal EPHY Present */
#define	BFE_EPR			0x00008000  /* EPHY Reset */
#define	BFE_PME			0x00001000  /* PHY Mode Enable */
#define	BFE_PMCE		0x00002000  /* PHY Mode Clocks Enable */
#define	BFE_PADDR		0x0007c000  /* PHY Address */
#define	BFE_PADDR_SHIFT		18

#define	BFE_BIST_STAT		0x0000000C  /* Built-In Self-Test Status */
#define	BFE_WKUP_LEN		0x00000010  /* Wakeup Length */

#define	BFE_INTR_STAT		0x00000020  /* Interrupt Status */
#define	BFE_ISTAT_PME		0x00000040 /* Power Management Event */
#define	BFE_ISTAT_TO		0x00000080 /* General Purpose Timeout */
#define	BFE_ISTAT_DSCE		0x00000400 /* Descriptor Error */
#define	BFE_ISTAT_DATAE		0x00000800 /* Data Error */
#define	BFE_ISTAT_DPE		0x00001000 /* Descr. Protocol Error */
#define	BFE_ISTAT_RDU		0x00002000 /* Receive Descr. Underflow */
#define	BFE_ISTAT_RFO		0x00004000 /* Receive FIFO Overflow */
#define	BFE_ISTAT_TFU		0x00008000 /* Transmit FIFO Underflow */
#define	BFE_ISTAT_RX		0x00010000 /* RX Interrupt */
#define	BFE_ISTAT_TX		0x01000000 /* TX Interrupt */
#define	BFE_ISTAT_EMAC		0x04000000 /* EMAC Interrupt */
#define	BFE_ISTAT_MII_WRITE	0x08000000 /* MII Write Interrupt */
#define	BFE_ISTAT_MII_READ	0x10000000 /* MII Read Interrupt */
#define	BFE_ISTAT_ERRORS	(BFE_ISTAT_DSCE | BFE_ISTAT_DATAE | \
    BFE_ISTAT_DPE | BFE_ISTAT_RDU | BFE_ISTAT_RFO | BFE_ISTAT_TFU)

#define	BFE_INTR_MASK		0x00000024 /* Interrupt Mask */
#define	BFE_IMASK_DEF		(BFE_ISTAT_ERRORS | BFE_ISTAT_TO | \
    BFE_ISTAT_RX | BFE_ISTAT_TX)

#define	BFE_MAC_CTRL		0x000000A8 /* MAC Control */
#define	BFE_CTRL_CRC32_ENAB	0x00000001 /* CRC32 Generation Enable */
#define	BFE_CTRL_PDOWN		0x00000004 /* Onchip EPHY Powerdown */
#define	BFE_CTRL_EDET		0x00000008 /* Onchip EPHY Energy Detected */
#define	BFE_CTRL_LED		0x000000e0 /* Onchip EPHY LED Control */
#define	BFE_CTRL_LED_SHIFT	5

#define	BFE_MAC_FLOW		0x000000AC /* MAC Flow Control */
#define	BFE_FLOW_RX_HIWAT	0x000000ff /* Onchip FIFO HI Water Mark */
#define	BFE_FLOW_PAUSE_ENAB	0x00008000 /* Enable Pause Frame Generation */

#define	BFE_RCV_LAZY		0x00000100 /* Lazy Interrupt Control */
#define	BFE_LAZY_TO_MASK	0x00ffffff /* Timeout */
#define	BFE_LAZY_FC_MASK	0xff000000 /* Frame Count */
#define	BFE_LAZY_FC_SHIFT	24

#define	BFE_DMATX_CTRL		0x00000200 /* DMA TX Control */
#define	BFE_TX_CTRL_ENABLE	0x00000001 /* Enable */
#define	BFE_TX_CTRL_SUSPEND	0x00000002 /* Suepend Request */
#define	BFE_TX_CTRL_LPBACK	0x00000004 /* Loopback Enable */
#define	BFE_TX_CTRL_FAIRPRI	0x00000008 /* Fair Priority */
#define	BFE_TX_CTRL_FLUSH	0x00000010 /* Flush Request */

#define	BFE_DMATX_ADDR		0x00000204 /* TX Descriptor Ring Address */
#define	BFE_DMATX_PTR		0x00000208 /* TX Last Posted Descriptor */
#define	BFE_DMATX_STAT		0x0000020C /* TX Curr Active Desc + Status */
#define	BFE_STAT_CDMASK		0x00000fff /* Current Descriptor Mask */
#define	BFE_STAT_SMASK		0x0000f000 /* State Mask */
#define	BFE_STAT_DISABLE	0x00000000 /* State Disabled */
#define	BFE_STAT_SACTIVE	0x00001000 /* State Active */
#define	BFE_STAT_SIDLE		0x00002000 /* State Idle Wait */
#define	BFE_STAT_STOPPED	0x00003000 /* State Stopped */
#define	BFE_STAT_SSUSP		0x00004000 /* State Suspend Pending */
#define	BFE_STAT_EMASK		0x000f0000 /* Error Mask */
#define	BFE_STAT_ENONE		0x00000000 /* Error None */
#define	BFE_STAT_EDPE		0x00010000 /* Error Desc. Protocol Error */
#define	BFE_STAT_EDFU		0x00020000 /* Error Data FIFO Underrun */
#define	BFE_STAT_EBEBR		0x00030000 /* Error Bus Error on Buffer Read */
#define	BFE_STAT_EBEDA		0x00040000 /* Error Bus Error on Desc. Access */
#define	BFE_STAT_FLUSHED	0x00100000 /* Flushed */

#define	BFE_DMARX_CTRL		0x00000210 /* DMA RX Control */
#define	BFE_RX_CTRL_ENABLE	0x00000001 /* Enable */
#define	BFE_RX_CTRL_ROMASK	0x000000fe /* Receive Offset Mask */
#define	BFE_RX_CTRL_ROSHIFT	1	/* Receive Offset Shift */

#define	BFE_DMARX_ADDR	0x00000214 /* DMA RX Descriptor Ring Address */
#define	BFE_DMARX_PTR	0x00000218 /* DMA RX Last Posted Descriptor */
#define	BFE_DMARX_STAT	0x0000021C /* DMA RX Current Active Desc. + Status */

#define	BFE_RXCONF	0x00000400 /* EMAC RX Config */
#define	BFE_RXCONF_DBCAST	0x00000001 /* Disable Broadcast */
#define	BFE_RXCONF_ALLMULTI	0x00000002 /* Accept All Multicast */
#define	BFE_RXCONF_NORXTX	0x00000004 /* rev. Disable While Transmitting */
#define	BFE_RXCONF_PROMISC	0x00000008 /* Promiscuous Enable */
#define	BFE_RXCONF_LPBACK	0x00000010 /* Loopback Enable */
#define	BFE_RXCONF_FLOW		0x00000020 /* Flow Control Enable */
#define	BFE_RXCONF_ACCEPT	0x00000040 /* Accept Unicst Flow Ctrl Frame */
#define	BFE_RXCONF_RFILT	0x00000080 /* Reject Filter */

#define	BFE_RXMAXLEN	0x00000404 /* EMAC RX Max Packet Length */
#define	BFE_TXMAXLEN	0x00000408 /* EMAC TX Max Packet Length */

#define	BFE_MDIO_CTRL		0x00000410 /* EMAC MDIO Control */
#define	BFE_MDIO_MAXF_MASK	0x0000007f /* MDC Frequency */
#define	BFE_MDIO_PREAMBLE	0x00000080 /* MII Preamble Enable */

#define	BFE_MDIO_DATA		0x00000414 /* EMAC MDIO Data */
#define	BFE_MDIO_DATA_DATA	0x0000ffff /* R/W Data */
#define	BFE_MDIO_TA_MASK	0x00030000 /* Turnaround Value */
#define	BFE_MDIO_TA_SHIFT	16
#define	BFE_MDIO_TA_VALID	2

#define	BFE_MDIO_RA_MASK	0x007c0000 /* Register Address */
#define	BFE_MDIO_PMD_MASK	0x0f800000 /* Physical Media Device */
#define	BFE_MDIO_OP_MASK	0x30000000 /* Opcode */
#define	BFE_MDIO_SB_MASK	0xc0000000 /* Start Bits */
#define	BFE_MDIO_SB_START	0x40000000 /* Start Of Frame */
#define	BFE_MDIO_RA_SHIFT	18
#define	BFE_MDIO_PMD_SHIFT	23
#define	BFE_MDIO_OP_SHIFT	28
#define	BFE_MDIO_OP_WRITE	1
#define	BFE_MDIO_OP_READ	2
#define	BFE_MDIO_SB_SHIFT	30

#define	BFE_EMAC_IMASK		0x00000418 /* EMAC Interrupt Mask */
#define	BFE_EMAC_ISTAT		0x0000041C /* EMAC Interrupt Status */
#define	BFE_EMAC_INT_MII	0x00000001 /* MII MDIO Interrupt */
#define	BFE_EMAC_INT_MIB	0x00000002 /* MIB Interrupt */
#define	BFE_EMAC_INT_FLOW	0x00000003 /* Flow Control Interrupt */

#define	BFE_CAM_DATA_LO		0x00000420 /* EMAC CAM Data Low */
#define	BFE_CAM_DATA_HI		0x00000424 /* EMAC CAM Data High */
#define	BFE_CAM_HI_VALID	0x00010000 /* Valid Bit */

#define	BFE_CAM_CTRL		0x00000428 /* EMAC CAM Control */
#define	BFE_CAM_ENABLE		0x00000001 /* CAM Enable */
#define	BFE_CAM_MSEL		0x00000002 /* Mask Select */
#define	BFE_CAM_READ		0x00000004 /* Read */
#define	BFE_CAM_WRITE		0x00000008 /* Read */
#define	BFE_CAM_INDEX_MASK	0x003f0000 /* Index Mask */
#define	BFE_CAM_BUSY		0x80000000 /* CAM Busy */
#define	BFE_CAM_INDEX_SHIFT	16

#define	BFE_ENET_CTRL		0x0000042C /* EMAC ENET Control */
#define	BFE_ENET_ENABLE		0x00000001 /* EMAC Enable */
#define	BFE_ENET_DISABLE	0x00000002 /* EMAC Disable */
#define	BFE_ENET_SRST		0x00000004 /* EMAC Soft Reset */
#define	BFE_ENET_EPSEL		0x00000008 /* External PHY Select */

#define	BFE_TX_CTRL		0x00000430 /* EMAC TX Control */
#define	BFE_TX_DUPLEX		0x00000001 /* Full Duplex */
#define	BFE_TX_FMODE		0x00000002 /* Flow Mode */
#define	BFE_TX_SBENAB		0x00000004 /* Single Backoff Enable */
#define	BFE_TX_SMALL_SLOT	0x00000008 /* Small Slottime */

#define	BFE_TX_WMARK		0x00000434 /* EMAC TX Watermark */

#define	BFE_MIB_CTRL		0x00000438 /* EMAC MIB Control */
#define	BFE_MIB_CLR_ON_READ	0x00000001 /* Autoclear on Read */

/* Status registers */
#define	BFE_TX_GOOD_O	0x00000500 /* MIB TX Good Octets */
#define	BFE_TX_GOOD_P	0x00000504 /* MIB TX Good Packets */
#define	BFE_TX_O	0x00000508 /* MIB TX Octets */
#define	BFE_TX_P	0x0000050C /* MIB TX Packets */
#define	BFE_TX_BCAST	0x00000510 /* MIB TX Broadcast Packets */
#define	BFE_TX_MCAST	0x00000514 /* MIB TX Multicast Packets */
#define	BFE_TX_64	0x00000518 /* MIB TX <= 64 byte Packets */
#define	BFE_TX_65_127	0x0000051C /* MIB TX 65 to 127 byte Packets */
#define	BFE_TX_128_255	0x00000520 /* MIB TX 128 to 255 byte Packets */
#define	BFE_TX_256_511	0x00000524 /* MIB TX 256 to 511 byte Packets */
#define	BFE_TX_512_1023	0x00000528 /* MIB TX 512 to 1023 byte Packets */
#define	BFE_TX_1024_MAX	0x0000052C /* MIB TX 1024 to max byte Packets */
#define	BFE_TX_JABBER	0x00000530 /* MIB TX Jabber Packets */
#define	BFE_TX_OSIZE	0x00000534 /* MIB TX Oversize Packets */
#define	BFE_TX_FRAG	0x00000538 /* MIB TX Fragment Packets */
#define	BFE_TX_URUNS	0x0000053C /* MIB TX Underruns */
#define	BFE_TX_TCOLS	0x00000540 /* MIB TX Total Collisions */
#define	BFE_TX_SCOLS	0x00000544 /* MIB TX Single Collisions */
#define	BFE_TX_MCOLS	0x00000548 /* MIB TX Multiple Collisions */
#define	BFE_TX_ECOLS	0x0000054C /* MIB TX Excessive Collisions */
#define	BFE_TX_LCOLS	0x00000550 /* MIB TX Late Collisions */
#define	BFE_TX_DEFERED	0x00000554 /* MIB TX Defered Packets */
#define	BFE_TX_CLOST	0x00000558 /* MIB TX Carrier Lost */
#define	BFE_TX_PAUSE	0x0000055C /* MIB TX Pause Packets */
#define	BFE_RX_GOOD_O	0x00000580 /* MIB RX Good Octets */
#define	BFE_RX_GOOD_P	0x00000584 /* MIB RX Good Packets */
#define	BFE_RX_O	0x00000588 /* MIB RX Octets */
#define	BFE_RX_P	0x0000058C /* MIB RX Packets */
#define	BFE_RX_BCAST	0x00000590 /* MIB RX Broadcast Packets */
#define	BFE_RX_MCAST	0x00000594 /* MIB RX Multicast Packets */
#define	BFE_RX_64	0x00000598 /* MIB RX <= 64 byte Packets */
#define	BFE_RX_65_127	0x0000059C /* MIB RX 65 to 127 byte Packets */
#define	BFE_RX_128_255	0x000005A0 /* MIB RX 128 to 255 byte Packets */
#define	BFE_RX_256_511	0x000005A4 /* MIB RX 256 to 511 byte Packets */
#define	BFE_RX_512_1023	0x000005A8 /* MIB RX 512 to 1023 byte Packets */
#define	BFE_RX_1024_MAX	0x000005AC /* MIB RX 1024 to max byte Packets */
#define	BFE_RX_JABBER	0x000005B0 /* MIB RX Jabber Packets */
#define	BFE_RX_OSIZE	0x000005B4 /* MIB RX Oversize Packets */
#define	BFE_RX_FRAG	0x000005B8 /* MIB RX Fragment Packets */
#define	BFE_RX_MISS	0x000005BC /* MIB RX Missed Packets */
#define	BFE_RX_CRCA	0x000005C0 /* MIB RX CRC Align Errors */
#define	BFE_RX_USIZE	0x000005C4 /* MIB RX Undersize Packets */
#define	BFE_RX_CRC	0x000005C8 /* MIB RX CRC Errors */
#define	BFE_RX_ALIGN	0x000005CC /* MIB RX Align Errors */
#define	BFE_RX_SYM	0x000005D0 /* MIB RX Symbol Errors */
#define	BFE_RX_PAUSE	0x000005D4 /* MIB RX Pause Packets */
#define	BFE_RX_NPAUSE	0x000005D8 /* MIB RX Non-Pause Packets */

#define	BFE_SBIMSTATE	0x00000F90 /* BFE_SB Initiator Agent State */
#define	BFE_PC		0x0000000f /* Pipe Count */
#define	BFE_AP_MASK	0x00000030 /* Arbitration Priority */
#define	BFE_AP_BOTH	0x00000000 /* Use both timeslices and token */
#define	BFE_AP_TS	0x00000010 /* Use timeslices only */
#define	BFE_AP_TK	0x00000020 /* Use token only */
#define	BFE_AP_RSV	0x00000030 /* Reserved */
#define	BFE_IBE		0x00020000 /* In Band Error */
#define	BFE_TO		0x00040000 /* Timeout */


/*
 * Seems the bcm440x has a fairly generic core, we only need be concerned with
 * a couple of these
 */
#define	BFE_SBINTVEC		0x00000F94 /* BFE_SB Interrupt Mask */
#define	BFE_INTVEC_PCI		0x00000001 /* Enable interrupts for PCI */
#define	BFE_INTVEC_ENET0	0x00000002 /* Enable interrupts for enet 0 */
#define	BFE_INTVEC_ILINE20	0x00000004 /* Enable interrupts for iline20 */
#define	BFE_INTVEC_CODEC	0x00000008 /* Enable interrupts for v90 codec */
#define	BFE_INTVEC_USB		0x00000010 /* Enable interrupts for usb */
#define	BFE_INTVEC_EXTIF	0x00000020 /* Enable intrs for external i/f */
#define	BFE_INTVEC_ENET1	0x00000040 /* Enable interrupts for enet 1 */

#define	BFE_SBTMSLOW		0x00000F98 /* BFE_SB Target State Low */
#define	BFE_RESET		0x00000001 /* Reset */
#define	BFE_REJECT		0x00000002 /* Reject */
#define	BFE_CLOCK		0x00010000 /* Clock Enable */
#define	BFE_FGC			0x00020000 /* Force Gated Clocks On */
#define	BFE_PE			0x40000000 /* Power Management Enable */
#define	BFE_BE			0x80000000 /* BIST Enable */

#define	BFE_SBTMSHIGH	0x00000F9C /* BFE_SB Target State High */
#define	BFE_SERR	0x00000001 /* S-error */
#define	BFE_INT		0x00000002 /* Interrupt */
#define	BFE_BUSY	0x00000004 /* Busy */
#define	BFE_GCR		0x20000000 /* Gated Clock Request */
#define	BFE_BISTF	0x40000000 /* BIST Failed */
#define	BFE_BISTD	0x80000000 /* BIST Done */

#define	BFE_SBBWA0	0x00000FA0 /* BFE_SB Bandwidth Allocation Table 0 */
#define	BFE_TAB0_MASK	0x0000ffff /* Lookup Table 0 */
#define	BFE_TAB1_MASK	0xffff0000 /* Lookup Table 0 */
#define	BFE_TAB0_SHIFT	0
#define	BFE_TAB1_SHIFT	16

#define	BFE_SBIMCFGLOW	0x00000FA8 /* BFE_SB Initiator Configuration Low */
#define	BFE_STO_MASK	0x00000003 /* Service Timeout */
#define	BFE_RTO_MASK	0x00000030 /* Request Timeout */
#define	BFE_CID_MASK	0x00ff0000 /* Connection ID */
#define	BFE_RTO_SHIFT	4
#define	BFE_CID_SHIFT	16

#define	BFE_SBIMCFGHIGH	0x00000FAC /* BFE_SB Initiator Configuration High */
#define	BFE_IEM_MASK	0x0000000c /* Inband Error Mode */
#define	BFE_TEM_MASK	0x00000030 /* Timeout Error Mode */
#define	BFE_BEM_MASK	0x000000c0 /* Bus Error Mode */
#define	BFE_TEM_SHIFT	4
#define	BFE_BEM_SHIFT	6

#define	BFE_SBTMCFGLOW	0x00000FB8 /* BFE_SB Target Configuration Low */
#define	BFE_LOW_CD_MASK	0x000000ff /* Clock Divide Mask */
#define	BFE_LOW_CO_MASK	0x0000f800 /* Clock Offset Mask */
#define	BFE_LOW_IF_MASK	0x00fc0000 /* Interrupt Flags Mask */
#define	BFE_LOW_IM_MASK	0x03000000 /* Interrupt Mode Mask */
#define	BFE_LOW_CO_SHIFT	11
#define	BFE_LOW_IF_SHIFT	18
#define	BFE_LOW_IM_SHIFT	24

#define	BFE_SBTMCFGHIGH	0x00000FBC /* BFE_SB Target Configuration High */
#define	BFE_HIGH_BM_MASK	0x00000003 /* Busy Mode */
#define	BFE_HIGH_RM_MASK	0x0000000C /* Retry Mode */
#define	BFE_HIGH_SM_MASK	0x00000030 /* Stop Mode */
#define	BFE_HIGH_EM_MASK	0x00000300 /* Error Mode */
#define	BFE_HIGH_IM_MASK	0x00000c00 /* Interrupt Mode */
#define	BFE_HIGH_RM_SHIFT	2
#define	BFE_HIGH_SM_SHIFT	4
#define	BFE_HIGH_EM_SHIFT	8
#define	BFE_HIGH_IM_SHIFT	10

#define	BFE_SBBCFG	0x00000FC0 /* BFE_SB Broadcast Configuration */
#define	BFE_LAT_MASK	0x00000003 /* BFE_SB Latency */
#define	BFE_MAX0_MASK	0x000f0000 /* MAX Counter 0 */
#define	BFE_MAX1_MASK	0x00f00000 /* MAX Counter 1 */
#define	BFE_MAX0_SHIFT	16
#define	BFE_MAX1_SHIFT	20

#define	BFE_SBBSTATE		0x00000FC8 /* BFE_SB Broadcast State */
#define	BFE_SBBSTATE_SRD	0x00000001 /* ST Reg Disable */
#define	BFE_SBBSTATE_HRD	0x00000002 /* Hold Reg Disable */

#define	BFE_SBACTCNFG		0x00000FD8 /* BFE_SB Activate Configuration */
#define	BFE_SBFLAGST		0x00000FE8 /* BFE_SB Current BFE_SBFLAGS */

#define	BFE_SBIDLOW		0x00000FF8 /* BFE_SB Identification Low */
#define	BFE_CS_MASK		0x00000003 /* Config Space Mask */
#define	BFE_AR_MASK		0x00000038 /* Num Address Ranges Supported */
#define	BFE_SYNCH		0x00000040 /* Sync */
#define	BFE_INIT		0x00000080 /* Initiator */
#define	BFE_MINLAT_MASK		0x00000f00 /* Minimum Backplane Latency */
#define	BFE_MAXLAT_MASK		0x0000f000 /* Maximum Backplane Latency */
#define	BFE_FIRST		0x00010000 /* This Initiator is First */
#define	BFE_CW_MASK		0x000c0000 /* Cycle Counter Width */
#define	BFE_TP_MASK		0x00f00000 /* Target Ports */
#define	BFE_IP_MASK		0x0f000000 /* Initiator Ports */
#define	BFE_AR_SHIFT		3
#define	BFE_MINLAT_SHIFT	8
#define	BFE_MAXLAT_SHIFT	12
#define	BFE_CW_SHIFT		18
#define	BFE_TP_SHIFT		20
#define	BFE_IP_SHIFT		24

#define	BFE_SBIDHIGH		0x00000FFC /* BFE_SB Identification High */
#define	BFE_RC_MASK		0x0000000f /* Revision Code */
#define	BFE_CC_MASK		0x0000fff0 /* Core Code */
#define	BFE_VC_MASK		0xffff0000 /* Vendor Code */
#define	BFE_CC_SHIFT		4
#define	BFE_VC_SHIFT		16

#define	BFE_CORE_ILINE20	0x801
#define	BFE_CORE_SDRAM		0x803
#define	BFE_CORE_PCI		0x804
#define	BFE_CORE_MIPS		0x805
#define	BFE_CORE_ENET		0x806
#define	BFE_CORE_CODEC		0x807
#define	BFE_CORE_USB		0x808
#define	BFE_CORE_ILINE100	0x80a
#define	BFE_CORE_EXTIF		0x811
#define	BFE_CORE_PCI_SHIFT	4
#define	BFE_IDH_CORE		0x0000FFF0


/* SSB PCI config space registers.  */
#define	BFE_BAR0_WIN		0x80
#define	BFE_BAR1_WIN		0x84
#define	BFE_SPROM_CONTROL	0x88
#define	BFE_BAR1_CONTROL	0x8c

/* SSB core and hsot control registers.  */
#define	BFE_SSB_CONTROL		0x00000000
#define	BFE_SSB_ARBCONTROL	0x00000010
#define	BFE_SSB_ISTAT		0x00000020
#define	BFE_SSB_IMASK		0x00000024
#define	BFE_SSB_MBOX		0x00000028
#define	BFE_SSB_BCAST_ADDR	0x00000050
#define	BFE_SSB_BCAST_DATA	0x00000054
#define	BFE_SSB_PCI_TRANS_0	0x00000100
#define	BFE_SSB_PCI_TRANS_1	0x00000104
#define	BFE_SSB_PCI_TRANS_2	0x00000108
#define	BFE_SSB_SPROM		0x00000800

#define	BFE_SSB_PCI_MEM		0x00000000
#define	BFE_SSB_PCI_IO		0x00000001
#define	BFE_SSB_PCI_CFG0	0x00000002
#define	BFE_SSB_PCI_CFG1	0x00000003
#define	BFE_SSB_PCI_PREF	0x00000004
#define	BFE_SSB_PCI_BURST	0x00000008
#define	BFE_SSB_PCI_MASK0	0xfc000000
#define	BFE_SSB_PCI_MASK1	0xfc000000
#define	BFE_SSB_PCI_MASK2	0xc0000000

#define	BFE_DESC_LEN		0x00001fff
#define	BFE_DESC_CMASK		0x0ff00000 /* Core specific bits */
#define	BFE_DESC_EOT		0x10000000 /* End of Table */
#define	BFE_DESC_IOC		0x20000000 /* Interrupt On Completion */
#define	BFE_DESC_EOF		0x40000000 /* End of Frame */
#define	BFE_DESC_SOF		0x80000000 /* Start of Frame */

#define	BFE_RX_CP_THRESHOLD	256
#define	BFE_RX_HEADER_LEN	28
#define	RX_HEAD_ROOM		(BFE_RX_HEADER_LEN + 2)

#define	BFE_RX_FLAG_OFIFO	0x00000001 /* FIFO Overflow */
#define	BFE_RX_FLAG_CRCERR	0x00000002 /* CRC Error */
#define	BFE_RX_FLAG_SERR	0x00000004 /* Receive Symbol Error */
#define	BFE_RX_FLAG_ODD		0x00000008 /* Frame has odd number of nibbles */
#define	BFE_RX_FLAG_LARGE	0x00000010 /* Frame is > RX MAX Length */
#define	BFE_RX_FLAG_MCAST	0x00000020 /* Dest is Multicast Address */
#define	BFE_RX_FLAG_BCAST	0x00000040 /* Dest is Broadcast Address */
#define	BFE_RX_FLAG_MISS	0x00000080 /* Received due to promisc mode */
#define	BFE_RX_FLAG_LAST	0x00000800 /* Last buffer in frame */
#define	BFE_RX_FLAG_ERRORS	(BFE_RX_FLAG_ODD | BFE_RX_FLAG_SERR | \
    BFE_RX_FLAG_CRCERR | BFE_RX_FLAG_OFIFO)

#define	BFE_MCAST_TBL_SIZE	32
#define	BFE_PCI_DMA		0x40000000
#define	BFE_REG_PCI		0x18002000

#define	BCOM_VENDORID		0x14E4
#define	BCOM_DEVICEID_BCM4401	0x4401
#define	BCOM_DEVICEID_BCM4401B0	0x170c

#define	BFE_TX_LIST_CNT		128
#define	BFE_RX_LIST_CNT		128
#define	BFE_TX_LIST_SIZE	BFE_TX_LIST_CNT * sizeof (struct bfe_desc)
#define	BFE_RX_OFFSET		30
#define	BFE_TX_QLEN		256

#define	BFE_DESC_ALIGN		0x1000
#define	BFE_RX_RING_ALIGN	4096
#define	BFE_TX_RING_ALIGN	4096
#define	BFE_MAXTXSEGS		16
#define	BFE_DMA_MAXADDR		0x3FFFFFFF	/* 1GB DMA address limit. */
#define	BFE_ADDR_LO(x)		((uint64_t)(x) & 0xFFFFFFFF)

/* Card's EEPROM */
#define	BFE_EEPROM_BASE		0x1000
#define	BFE_EEPROM_SIZE		32
#define	BFE_EEPROM_NODEADDR	78
#define	BFE_EEPROM_PHYADDR	90
#define	BFE_EEPROM_MAGIC	126

typedef	struct	bfe_hw_stats {
	/* TX Side */
	uint32_t	tx_good_octets;
	uint32_t	tx_good_pkts;
	uint32_t	tx_octets;
	uint32_t	tx_pkts;
	uint32_t	tx_broadcast_pkts;
	uint32_t	tx_multicast_pkts;
	uint32_t	tx_len_64;
	uint32_t	tx_len_65_to_127;
	uint32_t	tx_len_128_to_255;
	uint32_t	tx_len_256_to_511;
	uint32_t	tx_len_512_to_1023;
	uint32_t	tx_len_1024_to_max;
	uint32_t	tx_jabber_pkts;
	uint32_t	tx_oversize_pkts;
	uint32_t	tx_fragment_pkts;
	uint32_t	tx_underruns;
	uint32_t	tx_total_cols;
	uint32_t	tx_single_cols;
	uint32_t	tx_multiple_cols;
	uint32_t	tx_excessive_cols;
	uint32_t	tx_late_cols;
	uint32_t	tx_defered;
	uint32_t	tx_carrier_lost;
	uint32_t	tx_pause_pkts;
	uint32_t	pad1[8];

	/* RX Side */
	uint32_t	rx_good_octets;
	uint32_t	rx_good_pkts;
	uint32_t	rx_octets;
	uint32_t	rx_pkts;
	uint32_t	rx_broadcast_pkts;
	uint32_t	rx_multicast_pkts;
	uint32_t	rx_len_64;
	uint32_t	rx_len_65_to_127;
	uint32_t	rx_len_128_to_255;
	uint32_t	rx_len_256_to_511;
	uint32_t	rx_len_512_to_1023;
	uint32_t	rx_len_1024_to_max;
	uint32_t	rx_jabber_pkts;
	uint32_t	rx_oversize_pkts;
	uint32_t	rx_fragment_pkts;
	uint32_t	rx_missed_pkts;
	uint32_t	rx_crc_align_errs;
	uint32_t	rx_undersize;
	uint32_t	rx_crc_errs;
	uint32_t	rx_align_errs;
	uint32_t	rx_symbol_errs;
	uint32_t	rx_pause_pkts;
	uint32_t	rx_nonpause_pkts;
} bfe_hw_stats_t;

#endif /* _BFE_HW_H */