/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * Copyright 2017 Joyent, Inc. */ #include #include #include #include #include #include #include #include #include #include #define _SUN_TPI_VERSION 2 #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * This is a transport provider for the PF_KEY key mangement socket. * (See RFC 2367 for details.) * Downstream messages are wrapped in a keysock consumer interface KEYSOCK_IN * messages (see ipsec_info.h), and passed to the appropriate consumer. * Upstream messages are generated for all open PF_KEY sockets, when * appropriate, as well as the sender (as long as SO_USELOOPBACK is enabled) * in reply to downstream messages. * * Upstream messages must be created asynchronously for the following * situations: * * 1.) A keysock consumer requires an SA, and there is currently none. * 2.) An SA expires, either hard or soft lifetime. * 3.) Other events a consumer deems fit. * * The MT model of this is PERMOD, with shared put procedures. Two types of * messages, SADB_FLUSH and SADB_DUMP, need to lock down the perimeter to send * down the *multiple* messages they create. */ static vmem_t *keysock_vmem; /* for minor numbers. */ #define KEYSOCK_MAX_CONSUMERS 256 /* Default structure copied into T_INFO_ACK messages (from rts.c...) */ static struct T_info_ack keysock_g_t_info_ack = { T_INFO_ACK, T_INFINITE, /* TSDU_size. Maximum size messages. */ T_INVALID, /* ETSDU_size. No expedited data. */ T_INVALID, /* CDATA_size. No connect data. */ T_INVALID, /* DDATA_size. No disconnect data. */ 0, /* ADDR_size. */ 0, /* OPT_size. No user-settable options */ 64 * 1024, /* TIDU_size. keysock allows maximum size messages. */ T_COTS, /* SERV_type. keysock supports connection oriented. */ TS_UNBND, /* CURRENT_state. This is set from keysock_state. */ (XPG4_1) /* Provider flags */ }; /* Named Dispatch Parameter Management Structure */ typedef struct keysockparam_s { uint_t keysock_param_min; uint_t keysock_param_max; uint_t keysock_param_value; char *keysock_param_name; } keysockparam_t; /* * Table of NDD variables supported by keysock. These are loaded into * keysock_g_nd in keysock_init_nd. * All of these are alterable, within the min/max values given, at run time. */ static keysockparam_t lcl_param_arr[] = { /* min max value name */ { 4096, 65536, 8192, "keysock_xmit_hiwat"}, { 0, 65536, 1024, "keysock_xmit_lowat"}, { 4096, 65536, 8192, "keysock_recv_hiwat"}, { 65536, 1024*1024*1024, 256*1024, "keysock_max_buf"}, { 0, 3, 0, "keysock_debug"}, }; #define keystack_xmit_hiwat keystack_params[0].keysock_param_value #define keystack_xmit_lowat keystack_params[1].keysock_param_value #define keystack_recv_hiwat keystack_params[2].keysock_param_value #define keystack_max_buf keystack_params[3].keysock_param_value #define keystack_debug keystack_params[4].keysock_param_value #define ks0dbg(a) printf a /* NOTE: != 0 instead of > 0 so lint doesn't complain. */ #define ks1dbg(keystack, a) if (keystack->keystack_debug != 0) printf a #define ks2dbg(keystack, a) if (keystack->keystack_debug > 1) printf a #define ks3dbg(keystack, a) if (keystack->keystack_debug > 2) printf a static int keysock_close(queue_t *); static int keysock_open(queue_t *, dev_t *, int, int, cred_t *); static void keysock_wput(queue_t *, mblk_t *); static void keysock_rput(queue_t *, mblk_t *); static void keysock_rsrv(queue_t *); static void keysock_passup(mblk_t *, sadb_msg_t *, minor_t, keysock_consumer_t *, boolean_t, keysock_stack_t *); static void *keysock_stack_init(netstackid_t stackid, netstack_t *ns); static void keysock_stack_fini(netstackid_t stackid, void *arg); static struct module_info info = { 5138, "keysock", 1, INFPSZ, 512, 128 }; static struct qinit rinit = { (pfi_t)keysock_rput, (pfi_t)keysock_rsrv, keysock_open, keysock_close, NULL, &info }; static struct qinit winit = { (pfi_t)keysock_wput, NULL, NULL, NULL, NULL, &info }; struct streamtab keysockinfo = { &rinit, &winit }; extern struct modlinkage *keysock_modlp; /* * Plumb IPsec. * * NOTE: New "default" modules will need to be loaded here if needed before * boot time. */ /* Keep these in global space to keep the lint from complaining. */ static char *IPSECESP = "ipsecesp"; static char *IPSECESPDEV = "/devices/pseudo/ipsecesp@0:ipsecesp"; static char *IPSECAH = "ipsecah"; static char *IPSECAHDEV = "/devices/pseudo/ipsecah@0:ipsecah"; static char *IP6DEV = "/devices/pseudo/ip6@0:ip6"; static char *KEYSOCK = "keysock"; static char *STRMOD = "strmod"; /* * Load the other ipsec modules and plumb them together. */ int keysock_plumb_ipsec(netstack_t *ns) { ldi_handle_t lh, ip6_lh = NULL; ldi_ident_t li = NULL; int err = 0; int muxid, rval; boolean_t esp_present = B_TRUE; cred_t *cr; keysock_stack_t *keystack = ns->netstack_keysock; #ifdef NS_DEBUG (void) printf("keysock_plumb_ipsec(%d)\n", ns->netstack_stackid); #endif keystack->keystack_plumbed = 0; /* we're trying again.. */ cr = zone_get_kcred(netstackid_to_zoneid( keystack->keystack_netstack->netstack_stackid)); ASSERT(cr != NULL); /* * Load up the drivers (AH/ESP). * * I do this separately from the actual plumbing in case this function * ever gets called from a diskless boot before the root filesystem is * up. I don't have to worry about "keysock" because, well, if I'm * here, keysock must've loaded successfully. */ if (i_ddi_attach_pseudo_node(IPSECAH) == NULL) { ks0dbg(("IPsec: AH failed to attach.\n")); goto bail; } if (i_ddi_attach_pseudo_node(IPSECESP) == NULL) { ks0dbg(("IPsec: ESP failed to attach.\n")); esp_present = B_FALSE; } /* * Set up the IP streams for AH and ESP, as well as tacking keysock * on top of them. Assume keysock has set the autopushes up already. */ /* Open IP. */ err = ldi_ident_from_mod(keysock_modlp, &li); if (err) { ks0dbg(("IPsec: lid_ident_from_mod failed (err %d).\n", err)); goto bail; } err = ldi_open_by_name(IP6DEV, FREAD|FWRITE, cr, &ip6_lh, li); if (err) { ks0dbg(("IPsec: Open of IP6 failed (err %d).\n", err)); goto bail; } /* PLINK KEYSOCK/AH */ err = ldi_open_by_name(IPSECAHDEV, FREAD|FWRITE, cr, &lh, li); if (err) { ks0dbg(("IPsec: Open of AH failed (err %d).\n", err)); goto bail; } err = ldi_ioctl(lh, I_PUSH, (intptr_t)KEYSOCK, FKIOCTL, cr, &rval); if (err) { ks0dbg(("IPsec: Push of KEYSOCK onto AH failed (err %d).\n", err)); (void) ldi_close(lh, FREAD|FWRITE, cr); goto bail; } err = ldi_ioctl(ip6_lh, I_PLINK, (intptr_t)lh, FREAD+FWRITE+FNOCTTY+FKIOCTL, cr, &muxid); if (err) { ks0dbg(("IPsec: PLINK of KEYSOCK/AH failed (err %d).\n", err)); (void) ldi_close(lh, FREAD|FWRITE, cr); goto bail; } (void) ldi_close(lh, FREAD|FWRITE, cr); /* PLINK KEYSOCK/ESP */ if (esp_present) { err = ldi_open_by_name(IPSECESPDEV, FREAD|FWRITE, cr, &lh, li); if (err) { ks0dbg(("IPsec: Open of ESP failed (err %d).\n", err)); goto bail; } err = ldi_ioctl(lh, I_PUSH, (intptr_t)KEYSOCK, FKIOCTL, cr, &rval); if (err) { ks0dbg(("IPsec: " "Push of KEYSOCK onto ESP failed (err %d).\n", err)); (void) ldi_close(lh, FREAD|FWRITE, cr); goto bail; } err = ldi_ioctl(ip6_lh, I_PLINK, (intptr_t)lh, FREAD+FWRITE+FNOCTTY+FKIOCTL, cr, &muxid); if (err) { ks0dbg(("IPsec: " "PLINK of KEYSOCK/ESP failed (err %d).\n", err)); (void) ldi_close(lh, FREAD|FWRITE, cr); goto bail; } (void) ldi_close(lh, FREAD|FWRITE, cr); } bail: keystack->keystack_plumbed = (err == 0) ? 1 : -1; if (ip6_lh != NULL) { (void) ldi_close(ip6_lh, FREAD|FWRITE, cr); } if (li != NULL) ldi_ident_release(li); #ifdef NS_DEBUG (void) printf("keysock_plumb_ipsec -> %d\n", keystack->keystack_plumbed); #endif crfree(cr); return (err); } /* ARGSUSED */ static int keysock_param_get(queue_t *q, mblk_t *mp, caddr_t cp, cred_t *cr) { keysockparam_t *keysockpa = (keysockparam_t *)cp; uint_t value; keysock_t *ks = (keysock_t *)q->q_ptr; keysock_stack_t *keystack = ks->keysock_keystack; mutex_enter(&keystack->keystack_param_lock); value = keysockpa->keysock_param_value; mutex_exit(&keystack->keystack_param_lock); (void) mi_mpprintf(mp, "%u", value); return (0); } /* This routine sets an NDD variable in a keysockparam_t structure. */ /* ARGSUSED */ static int keysock_param_set(queue_t *q, mblk_t *mp, char *value, caddr_t cp, cred_t *cr) { ulong_t new_value; keysockparam_t *keysockpa = (keysockparam_t *)cp; keysock_t *ks = (keysock_t *)q->q_ptr; keysock_stack_t *keystack = ks->keysock_keystack; /* Convert the value from a string into a long integer. */ if (ddi_strtoul(value, NULL, 10, &new_value) != 0) return (EINVAL); mutex_enter(&keystack->keystack_param_lock); /* * Fail the request if the new value does not lie within the * required bounds. */ if (new_value < keysockpa->keysock_param_min || new_value > keysockpa->keysock_param_max) { mutex_exit(&keystack->keystack_param_lock); return (EINVAL); } /* Set the new value */ keysockpa->keysock_param_value = new_value; mutex_exit(&keystack->keystack_param_lock); return (0); } /* * Initialize keysock at module load time */ boolean_t keysock_ddi_init(void) { keysock_max_optsize = optcom_max_optsize( keysock_opt_obj.odb_opt_des_arr, keysock_opt_obj.odb_opt_arr_cnt); keysock_vmem = vmem_create("keysock", (void *)1, MAXMIN, 1, NULL, NULL, NULL, 1, VM_SLEEP | VMC_IDENTIFIER); /* * We want to be informed each time a stack is created or * destroyed in the kernel, so we can maintain the * set of keysock_stack_t's. */ netstack_register(NS_KEYSOCK, keysock_stack_init, NULL, keysock_stack_fini); return (B_TRUE); } /* * Walk through the param array specified registering each element with the * named dispatch handler. */ static boolean_t keysock_param_register(IDP *ndp, keysockparam_t *ksp, int cnt) { for (; cnt-- > 0; ksp++) { if (ksp->keysock_param_name != NULL && ksp->keysock_param_name[0]) { if (!nd_load(ndp, ksp->keysock_param_name, keysock_param_get, keysock_param_set, (caddr_t)ksp)) { nd_free(ndp); return (B_FALSE); } } } return (B_TRUE); } /* * Initialize keysock for one stack instance */ /* ARGSUSED */ static void * keysock_stack_init(netstackid_t stackid, netstack_t *ns) { keysock_stack_t *keystack; keysockparam_t *ksp; keystack = (keysock_stack_t *)kmem_zalloc(sizeof (*keystack), KM_SLEEP); keystack->keystack_netstack = ns; keystack->keystack_acquire_seq = 0xffffffff; ksp = (keysockparam_t *)kmem_alloc(sizeof (lcl_param_arr), KM_SLEEP); keystack->keystack_params = ksp; bcopy(lcl_param_arr, ksp, sizeof (lcl_param_arr)); (void) keysock_param_register(&keystack->keystack_g_nd, ksp, A_CNT(lcl_param_arr)); mutex_init(&keystack->keystack_list_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&keystack->keystack_consumers_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&keystack->keystack_param_lock, NULL, MUTEX_DEFAULT, NULL); return (keystack); } /* * Free NDD variable space, and other destructors, for keysock. */ void keysock_ddi_destroy(void) { netstack_unregister(NS_KEYSOCK); vmem_destroy(keysock_vmem); } /* * Remove one stack instance from keysock */ /* ARGSUSED */ static void keysock_stack_fini(netstackid_t stackid, void *arg) { keysock_stack_t *keystack = (keysock_stack_t *)arg; nd_free(&keystack->keystack_g_nd); kmem_free(keystack->keystack_params, sizeof (lcl_param_arr)); keystack->keystack_params = NULL; mutex_destroy(&keystack->keystack_list_lock); mutex_destroy(&keystack->keystack_consumers_lock); mutex_destroy(&keystack->keystack_param_lock); kmem_free(keystack, sizeof (*keystack)); } /* * Close routine for keysock. */ static int keysock_close(queue_t *q) { keysock_t *ks; keysock_consumer_t *kc; void *ptr = q->q_ptr; int size; keysock_stack_t *keystack; qprocsoff(q); /* Safe assumption. */ ASSERT(ptr != NULL); if (WR(q)->q_next) { kc = (keysock_consumer_t *)ptr; keystack = kc->kc_keystack; ks1dbg(keystack, ("Module close, removing a consumer (%d).\n", kc->kc_sa_type)); /* * Because of PERMOD open/close exclusive perimeter, I * can inspect KC_FLUSHING w/o locking down kc->kc_lock. */ if (kc->kc_flags & KC_FLUSHING) { /* * If this decrement was the last one, send * down the next pending one, if any. * * With a PERMOD perimeter, the mutexes ops aren't * really necessary, but if we ever loosen up, we will * have this bit covered already. */ keystack->keystack_flushdump--; if (keystack->keystack_flushdump == 0) { /* * The flush/dump terminated by having a * consumer go away. I need to send up to the * appropriate keysock all of the relevant * information. Unfortunately, I don't * have that handy. */ ks0dbg(("Consumer went away while flushing or" " dumping.\n")); } } size = sizeof (keysock_consumer_t); mutex_enter(&keystack->keystack_consumers_lock); keystack->keystack_consumers[kc->kc_sa_type] = NULL; mutex_exit(&keystack->keystack_consumers_lock); mutex_destroy(&kc->kc_lock); netstack_rele(kc->kc_keystack->keystack_netstack); } else { ks = (keysock_t *)ptr; keystack = ks->keysock_keystack; ks3dbg(keystack, ("Driver close, PF_KEY socket is going away.\n")); if ((ks->keysock_flags & KEYSOCK_EXTENDED) != 0) atomic_dec_32(&keystack->keystack_num_extended); size = sizeof (keysock_t); mutex_enter(&keystack->keystack_list_lock); *(ks->keysock_ptpn) = ks->keysock_next; if (ks->keysock_next != NULL) ks->keysock_next->keysock_ptpn = ks->keysock_ptpn; mutex_exit(&keystack->keystack_list_lock); mutex_destroy(&ks->keysock_lock); vmem_free(keysock_vmem, (void *)(uintptr_t)ks->keysock_serial, 1); netstack_rele(ks->keysock_keystack->keystack_netstack); } /* Now I'm free. */ kmem_free(ptr, size); return (0); } /* * Open routine for keysock. */ /* ARGSUSED */ static int keysock_open(queue_t *q, dev_t *devp, int flag, int sflag, cred_t *credp) { keysock_t *ks; keysock_consumer_t *kc; mblk_t *mp; ipsec_info_t *ii; netstack_t *ns; keysock_stack_t *keystack; if (secpolicy_ip_config(credp, B_FALSE) != 0) { /* Privilege debugging will log the error */ return (EPERM); } if (q->q_ptr != NULL) return (0); /* Re-open of an already open instance. */ ns = netstack_find_by_cred(credp); ASSERT(ns != NULL); keystack = ns->netstack_keysock; ASSERT(keystack != NULL); ks3dbg(keystack, ("Entering keysock open.\n")); if (keystack->keystack_plumbed < 1) { netstack_t *ns = keystack->keystack_netstack; keystack->keystack_plumbed = 0; #ifdef NS_DEBUG printf("keysock_open(%d) - plumb\n", keystack->keystack_netstack->netstack_stackid); #endif /* * Don't worry about ipsec_failure being true here. * (See ip.c). An open of keysock should try and force * the issue. Maybe it was a transient failure. */ ipsec_loader_loadnow(ns->netstack_ipsec); } if (sflag & MODOPEN) { /* Initialize keysock_consumer state here. */ kc = kmem_zalloc(sizeof (keysock_consumer_t), KM_NOSLEEP); if (kc == NULL) { netstack_rele(keystack->keystack_netstack); return (ENOMEM); } mutex_init(&kc->kc_lock, NULL, MUTEX_DEFAULT, 0); kc->kc_rq = q; kc->kc_wq = WR(q); q->q_ptr = kc; WR(q)->q_ptr = kc; kc->kc_keystack = keystack; qprocson(q); /* * Send down initial message to whatever I was pushed on top * of asking for its consumer type. The reply will set it. */ /* Allocate it. */ mp = allocb(sizeof (ipsec_info_t), BPRI_HI); if (mp == NULL) { ks1dbg(keystack, ( "keysock_open: Cannot allocate KEYSOCK_HELLO.\n")); /* Do I need to set these to null? */ q->q_ptr = NULL; WR(q)->q_ptr = NULL; mutex_destroy(&kc->kc_lock); kmem_free(kc, sizeof (*kc)); netstack_rele(keystack->keystack_netstack); return (ENOMEM); } /* If I allocated okay, putnext to what I was pushed atop. */ mp->b_wptr += sizeof (ipsec_info_t); mp->b_datap->db_type = M_CTL; ii = (ipsec_info_t *)mp->b_rptr; ii->ipsec_info_type = KEYSOCK_HELLO; /* Length only of type/len. */ ii->ipsec_info_len = sizeof (ii->ipsec_allu); ks2dbg(keystack, ("Ready to putnext KEYSOCK_HELLO.\n")); putnext(kc->kc_wq, mp); } else { minor_t ksminor; /* Initialize keysock state. */ ks2dbg(keystack, ("Made it into PF_KEY socket open.\n")); ksminor = (minor_t)(uintptr_t) vmem_alloc(keysock_vmem, 1, VM_NOSLEEP); if (ksminor == 0) { netstack_rele(keystack->keystack_netstack); return (ENOMEM); } ks = kmem_zalloc(sizeof (keysock_t), KM_NOSLEEP); if (ks == NULL) { vmem_free(keysock_vmem, (void *)(uintptr_t)ksminor, 1); netstack_rele(keystack->keystack_netstack); return (ENOMEM); } mutex_init(&ks->keysock_lock, NULL, MUTEX_DEFAULT, 0); ks->keysock_rq = q; ks->keysock_wq = WR(q); ks->keysock_state = TS_UNBND; ks->keysock_serial = ksminor; q->q_ptr = ks; WR(q)->q_ptr = ks; ks->keysock_keystack = keystack; /* * The receive hiwat is only looked at on the stream head * queue. Store in q_hiwat in order to return on SO_RCVBUF * getsockopts. */ q->q_hiwat = keystack->keystack_recv_hiwat; /* * The transmit hiwat/lowat is only looked at on IP's queue. * Store in q_hiwat/q_lowat in order to return on * SO_SNDBUF/SO_SNDLOWAT getsockopts. */ WR(q)->q_hiwat = keystack->keystack_xmit_hiwat; WR(q)->q_lowat = keystack->keystack_xmit_lowat; *devp = makedevice(getmajor(*devp), ksminor); /* * Thread keysock into the global keysock list. */ mutex_enter(&keystack->keystack_list_lock); ks->keysock_next = keystack->keystack_list; ks->keysock_ptpn = &keystack->keystack_list; if (keystack->keystack_list != NULL) { keystack->keystack_list->keysock_ptpn = &ks->keysock_next; } keystack->keystack_list = ks; mutex_exit(&keystack->keystack_list_lock); qprocson(q); (void) proto_set_rx_hiwat(q, NULL, keystack->keystack_recv_hiwat); /* * Wait outside the keysock module perimeter for IPsec * plumbing to be completed. If it fails, keysock_close() * undoes everything we just did. */ if (!ipsec_loader_wait(q, keystack->keystack_netstack->netstack_ipsec)) { (void) keysock_close(q); return (EPFNOSUPPORT); } } return (0); } /* BELOW THIS LINE ARE ROUTINES INCLUDING AND RELATED TO keysock_wput(). */ /* * Copy relevant state bits. */ static void keysock_copy_info(struct T_info_ack *tap, keysock_t *ks) { *tap = keysock_g_t_info_ack; tap->CURRENT_state = ks->keysock_state; tap->OPT_size = keysock_max_optsize; } /* * This routine responds to T_CAPABILITY_REQ messages. It is called by * keysock_wput. Much of the T_CAPABILITY_ACK information is copied from * keysock_g_t_info_ack. The current state of the stream is copied from * keysock_state. */ static void keysock_capability_req(queue_t *q, mblk_t *mp) { keysock_t *ks = (keysock_t *)q->q_ptr; t_uscalar_t cap_bits1; struct T_capability_ack *tcap; cap_bits1 = ((struct T_capability_req *)mp->b_rptr)->CAP_bits1; mp = tpi_ack_alloc(mp, sizeof (struct T_capability_ack), mp->b_datap->db_type, T_CAPABILITY_ACK); if (mp == NULL) return; tcap = (struct T_capability_ack *)mp->b_rptr; tcap->CAP_bits1 = 0; if (cap_bits1 & TC1_INFO) { keysock_copy_info(&tcap->INFO_ack, ks); tcap->CAP_bits1 |= TC1_INFO; } qreply(q, mp); } /* * This routine responds to T_INFO_REQ messages. It is called by * keysock_wput_other. * Most of the T_INFO_ACK information is copied from keysock_g_t_info_ack. * The current state of the stream is copied from keysock_state. */ static void keysock_info_req(queue_t *q, mblk_t *mp) { mp = tpi_ack_alloc(mp, sizeof (struct T_info_ack), M_PCPROTO, T_INFO_ACK); if (mp == NULL) return; keysock_copy_info((struct T_info_ack *)mp->b_rptr, (keysock_t *)q->q_ptr); qreply(q, mp); } /* * keysock_err_ack. This routine creates a * T_ERROR_ACK message and passes it * upstream. */ static void keysock_err_ack(queue_t *q, mblk_t *mp, int t_error, int sys_error) { if ((mp = mi_tpi_err_ack_alloc(mp, t_error, sys_error)) != NULL) qreply(q, mp); } /* * This routine retrieves the current status of socket options. * It returns the size of the option retrieved. */ /* ARGSUSED */ int keysock_opt_get(queue_t *q, int level, int name, uchar_t *ptr) { int *i1 = (int *)ptr; keysock_t *ks = (keysock_t *)q->q_ptr; switch (level) { case SOL_SOCKET: mutex_enter(&ks->keysock_lock); switch (name) { case SO_TYPE: *i1 = SOCK_RAW; break; case SO_USELOOPBACK: *i1 = (int)(!((ks->keysock_flags & KEYSOCK_NOLOOP) == KEYSOCK_NOLOOP)); break; /* * The following two items can be manipulated, * but changing them should do nothing. */ case SO_SNDBUF: *i1 = (int)q->q_hiwat; break; case SO_RCVBUF: *i1 = (int)(RD(q)->q_hiwat); break; } mutex_exit(&ks->keysock_lock); break; default: return (0); } return (sizeof (int)); } /* * This routine sets socket options. */ /* ARGSUSED */ int keysock_opt_set(queue_t *q, uint_t mgmt_flags, int level, int name, uint_t inlen, uchar_t *invalp, uint_t *outlenp, uchar_t *outvalp, void *thisdg_attrs, cred_t *cr) { int *i1 = (int *)invalp, errno = 0; keysock_t *ks = (keysock_t *)q->q_ptr; keysock_stack_t *keystack = ks->keysock_keystack; switch (level) { case SOL_SOCKET: mutex_enter(&ks->keysock_lock); switch (name) { case SO_USELOOPBACK: if (!(*i1)) ks->keysock_flags |= KEYSOCK_NOLOOP; else ks->keysock_flags &= ~KEYSOCK_NOLOOP; break; case SO_SNDBUF: if (*i1 > keystack->keystack_max_buf) errno = ENOBUFS; else q->q_hiwat = *i1; break; case SO_RCVBUF: if (*i1 > keystack->keystack_max_buf) { errno = ENOBUFS; } else { RD(q)->q_hiwat = *i1; (void) proto_set_rx_hiwat(RD(q), NULL, *i1); } break; default: errno = EINVAL; } mutex_exit(&ks->keysock_lock); break; default: errno = EINVAL; } return (errno); } /* * Handle STREAMS ioctl copyin for getsockname() for both PF_KEY and * PF_POLICY. */ void keysock_spdsock_wput_iocdata(queue_t *q, mblk_t *mp, sa_family_t family) { mblk_t *mp1; STRUCT_HANDLE(strbuf, sb); /* What size of sockaddr do we need? */ const uint_t addrlen = sizeof (struct sockaddr); /* We only handle TI_GET{MY,PEER}NAME (get{sock,peer}name()). */ switch (((struct iocblk *)mp->b_rptr)->ioc_cmd) { case TI_GETMYNAME: case TI_GETPEERNAME: break; default: freemsg(mp); return; } switch (mi_copy_state(q, mp, &mp1)) { case -1: return; case MI_COPY_CASE(MI_COPY_IN, 1): break; case MI_COPY_CASE(MI_COPY_OUT, 1): /* * The address has been copied out, so now * copyout the strbuf. */ mi_copyout(q, mp); return; case MI_COPY_CASE(MI_COPY_OUT, 2): /* * The address and strbuf have been copied out. * We're done, so just acknowledge the original * M_IOCTL. */ mi_copy_done(q, mp, 0); return; default: /* * Something strange has happened, so acknowledge * the original M_IOCTL with an EPROTO error. */ mi_copy_done(q, mp, EPROTO); return; } /* * Now we have the strbuf structure for TI_GET{MY,PEER}NAME. Next we * copyout the requested address and then we'll copyout the strbuf. * Regardless of sockname or peername, we just return a sockaddr with * sa_family set. */ STRUCT_SET_HANDLE(sb, ((struct iocblk *)mp->b_rptr)->ioc_flag, (void *)mp1->b_rptr); if (STRUCT_FGET(sb, maxlen) < addrlen) { mi_copy_done(q, mp, EINVAL); return; } mp1 = mi_copyout_alloc(q, mp, STRUCT_FGETP(sb, buf), addrlen, B_TRUE); if (mp1 == NULL) return; STRUCT_FSET(sb, len, addrlen); ((struct sockaddr *)mp1->b_wptr)->sa_family = family; mp1->b_wptr += addrlen; mi_copyout(q, mp); } /* * Handle STREAMS messages. */ static void keysock_wput_other(queue_t *q, mblk_t *mp) { struct iocblk *iocp; int error; keysock_t *ks = (keysock_t *)q->q_ptr; keysock_stack_t *keystack = ks->keysock_keystack; cred_t *cr; switch (mp->b_datap->db_type) { case M_PROTO: case M_PCPROTO: if ((mp->b_wptr - mp->b_rptr) < sizeof (long)) { ks3dbg(keystack, ( "keysock_wput_other: Not big enough M_PROTO\n")); freemsg(mp); return; } switch (((union T_primitives *)mp->b_rptr)->type) { case T_CAPABILITY_REQ: keysock_capability_req(q, mp); break; case T_INFO_REQ: keysock_info_req(q, mp); break; case T_SVR4_OPTMGMT_REQ: case T_OPTMGMT_REQ: /* * All Solaris components should pass a db_credp * for this TPI message, hence we ASSERT. * But in case there is some other M_PROTO that looks * like a TPI message sent by some other kernel * component, we check and return an error. */ cr = msg_getcred(mp, NULL); ASSERT(cr != NULL); if (cr == NULL) { keysock_err_ack(q, mp, TSYSERR, EINVAL); return; } if (((union T_primitives *)mp->b_rptr)->type == T_SVR4_OPTMGMT_REQ) { svr4_optcom_req(q, mp, cr, &keysock_opt_obj); } else { tpi_optcom_req(q, mp, cr, &keysock_opt_obj); } break; case T_DATA_REQ: case T_EXDATA_REQ: case T_ORDREL_REQ: /* Illegal for keysock. */ freemsg(mp); (void) putnextctl1(RD(q), M_ERROR, EPROTO); break; default: /* Not supported by keysock. */ keysock_err_ack(q, mp, TNOTSUPPORT, 0); break; } return; case M_IOCDATA: keysock_spdsock_wput_iocdata(q, mp, PF_KEY); return; case M_IOCTL: iocp = (struct iocblk *)mp->b_rptr; error = EINVAL; switch (iocp->ioc_cmd) { case TI_GETMYNAME: case TI_GETPEERNAME: /* * For pfiles(1) observability with getsockname(). * See keysock_spdsock_wput_iocdata() for the rest of * this. */ mi_copyin(q, mp, NULL, SIZEOF_STRUCT(strbuf, iocp->ioc_flag)); return; case ND_SET: case ND_GET: if (nd_getset(q, keystack->keystack_g_nd, mp)) { qreply(q, mp); return; } else error = ENOENT; /* FALLTHRU */ default: miocnak(q, mp, 0, error); return; } case M_FLUSH: if (*mp->b_rptr & FLUSHW) { flushq(q, FLUSHALL); *mp->b_rptr &= ~FLUSHW; } if (*mp->b_rptr & FLUSHR) { qreply(q, mp); return; } /* Else FALLTHRU */ } /* If fell through, just black-hole the message. */ freemsg(mp); } /* * Transmit a PF_KEY error message to the instance either pointed to * by ks, the instance with serial number serial, or more, depending. * * The faulty message (or a reasonable facsimile thereof) is in mp. * This function will free mp or recycle it for delivery, thereby causing * the stream head to free it. */ static void keysock_error(keysock_t *ks, mblk_t *mp, int error, int diagnostic) { sadb_msg_t *samsg = (sadb_msg_t *)mp->b_rptr; keysock_stack_t *keystack = ks->keysock_keystack; ASSERT(mp->b_datap->db_type == M_DATA); if (samsg->sadb_msg_type < SADB_GETSPI || samsg->sadb_msg_type > SADB_MAX) samsg->sadb_msg_type = SADB_RESERVED; /* * Strip out extension headers. */ ASSERT(mp->b_rptr + sizeof (*samsg) <= mp->b_datap->db_lim); mp->b_wptr = mp->b_rptr + sizeof (*samsg); samsg->sadb_msg_len = SADB_8TO64(sizeof (sadb_msg_t)); samsg->sadb_msg_errno = (uint8_t)error; samsg->sadb_x_msg_diagnostic = (uint16_t)diagnostic; keysock_passup(mp, samsg, ks->keysock_serial, NULL, B_FALSE, keystack); } /* * Pass down a message to a consumer. Wrap it in KEYSOCK_IN, and copy * in the extv if passed in. */ static void keysock_passdown(keysock_t *ks, mblk_t *mp, uint8_t satype, sadb_ext_t *extv[], boolean_t flushmsg) { keysock_consumer_t *kc; mblk_t *wrapper; keysock_in_t *ksi; int i; keysock_stack_t *keystack = ks->keysock_keystack; wrapper = allocb(sizeof (ipsec_info_t), BPRI_HI); if (wrapper == NULL) { ks3dbg(keystack, ("keysock_passdown: allocb failed.\n")); if (extv[SADB_EXT_KEY_ENCRYPT] != NULL) bzero(extv[SADB_EXT_KEY_ENCRYPT], SADB_64TO8( extv[SADB_EXT_KEY_ENCRYPT]->sadb_ext_len)); if (extv[SADB_EXT_KEY_AUTH] != NULL) bzero(extv[SADB_EXT_KEY_AUTH], SADB_64TO8( extv[SADB_EXT_KEY_AUTH]->sadb_ext_len)); if (flushmsg) { ks0dbg(( "keysock: Downwards flush/dump message failed!\n")); /* If this is true, I hold the perimeter. */ keystack->keystack_flushdump--; } freemsg(mp); return; } wrapper->b_datap->db_type = M_CTL; ksi = (keysock_in_t *)wrapper->b_rptr; ksi->ks_in_type = KEYSOCK_IN; ksi->ks_in_len = sizeof (keysock_in_t); if (extv[SADB_EXT_ADDRESS_SRC] != NULL) ksi->ks_in_srctype = KS_IN_ADDR_UNKNOWN; else ksi->ks_in_srctype = KS_IN_ADDR_NOTTHERE; if (extv[SADB_EXT_ADDRESS_DST] != NULL) ksi->ks_in_dsttype = KS_IN_ADDR_UNKNOWN; else ksi->ks_in_dsttype = KS_IN_ADDR_NOTTHERE; for (i = 0; i <= SADB_EXT_MAX; i++) ksi->ks_in_extv[i] = extv[i]; ksi->ks_in_serial = ks->keysock_serial; wrapper->b_wptr += sizeof (ipsec_info_t); wrapper->b_cont = mp; /* * Find the appropriate consumer where the message is passed down. */ kc = keystack->keystack_consumers[satype]; if (kc == NULL) { freeb(wrapper); keysock_error(ks, mp, EINVAL, SADB_X_DIAGNOSTIC_UNKNOWN_SATYPE); if (flushmsg) { ks0dbg(( "keysock: Downwards flush/dump message failed!\n")); /* If this is true, I hold the perimeter. */ keystack->keystack_flushdump--; } return; } /* * NOTE: There used to be code in here to spin while a flush or * dump finished. Keysock now assumes that consumers have enough * MT-savviness to deal with that. */ /* * Current consumers (AH and ESP) are guaranteed to return a * FLUSH or DUMP message back, so when we reach here, we don't * have to worry about keysock_flushdumps. */ putnext(kc->kc_wq, wrapper); } /* * High-level reality checking of extensions. */ static boolean_t ext_check(sadb_ext_t *ext, keysock_stack_t *keystack) { int i; uint64_t *lp; sadb_ident_t *id; char *idstr; switch (ext->sadb_ext_type) { case SADB_EXT_ADDRESS_SRC: case SADB_EXT_ADDRESS_DST: case SADB_X_EXT_ADDRESS_INNER_SRC: case SADB_X_EXT_ADDRESS_INNER_DST: /* Check for at least enough addtl length for a sockaddr. */ if (ext->sadb_ext_len <= SADB_8TO64(sizeof (sadb_address_t))) return (B_FALSE); break; case SADB_EXT_LIFETIME_HARD: case SADB_EXT_LIFETIME_SOFT: case SADB_EXT_LIFETIME_CURRENT: if (ext->sadb_ext_len != SADB_8TO64(sizeof (sadb_lifetime_t))) return (B_FALSE); break; case SADB_EXT_SPIRANGE: /* See if the SPI range is legit. */ if (htonl(((sadb_spirange_t *)ext)->sadb_spirange_min) > htonl(((sadb_spirange_t *)ext)->sadb_spirange_max)) return (B_FALSE); break; case SADB_EXT_KEY_AUTH: case SADB_EXT_KEY_ENCRYPT: /* Key length check. */ if (((sadb_key_t *)ext)->sadb_key_bits == 0) return (B_FALSE); /* * Check to see if the key length (in bits) is less than the * extension length (in 8-bits words). */ if ((roundup(SADB_1TO8(((sadb_key_t *)ext)->sadb_key_bits), 8) + sizeof (sadb_key_t)) != SADB_64TO8(ext->sadb_ext_len)) { ks1dbg(keystack, ( "ext_check: Key bits/length inconsistent.\n")); ks1dbg(keystack, ("%d bits, len is %d bytes.\n", ((sadb_key_t *)ext)->sadb_key_bits, SADB_64TO8(ext->sadb_ext_len))); return (B_FALSE); } /* All-zeroes key check. */ lp = (uint64_t *)(((char *)ext) + sizeof (sadb_key_t)); for (i = 0; i < (ext->sadb_ext_len - SADB_8TO64(sizeof (sadb_key_t))); i++) if (lp[i] != 0) break; /* Out of for loop. */ /* If finished the loop naturally, it's an all zero key. */ if (lp[i] == 0) return (B_FALSE); break; case SADB_EXT_IDENTITY_SRC: case SADB_EXT_IDENTITY_DST: /* * Make sure the strings in these identities are * null-terminated. RFC 2367 underspecified how to handle * such a case. I "proactively" null-terminate the string * at the last byte if it's not terminated sooner. */ id = (sadb_ident_t *)ext; i = SADB_64TO8(id->sadb_ident_len); i -= sizeof (sadb_ident_t); idstr = (char *)(id + 1); while (*idstr != '\0' && i > 0) { i--; idstr++; } if (i == 0) { /* * I.e., if the bozo user didn't NULL-terminate the * string... */ idstr--; *idstr = '\0'; } break; } return (B_TRUE); /* For now... */ } /* Return values for keysock_get_ext(). */ #define KGE_OK 0 #define KGE_DUP 1 #define KGE_UNK 2 #define KGE_LEN 3 #define KGE_CHK 4 /* * Parse basic extension headers and return in the passed-in pointer vector. * Return values include: * * KGE_OK Everything's nice and parsed out. * If there are no extensions, place NULL in extv[0]. * KGE_DUP There is a duplicate extension. * First instance in appropriate bin. First duplicate in * extv[0]. * KGE_UNK Unknown extension type encountered. extv[0] contains * unknown header. * KGE_LEN Extension length error. * KGE_CHK High-level reality check failed on specific extension. * * My apologies for some of the pointer arithmetic in here. I'm thinking * like an assembly programmer, yet trying to make the compiler happy. */ static int keysock_get_ext(sadb_ext_t *extv[], sadb_msg_t *basehdr, uint_t msgsize, keysock_stack_t *keystack) { bzero(extv, sizeof (sadb_ext_t *) * (SADB_EXT_MAX + 1)); /* Use extv[0] as the "current working pointer". */ extv[0] = (sadb_ext_t *)(basehdr + 1); while (extv[0] < (sadb_ext_t *)(((uint8_t *)basehdr) + msgsize)) { /* Check for unknown headers. */ if (extv[0]->sadb_ext_type == 0 || extv[0]->sadb_ext_type > SADB_EXT_MAX) return (KGE_UNK); /* * Check length. Use uint64_t because extlen is in units * of 64-bit words. If length goes beyond the msgsize, * return an error. (Zero length also qualifies here.) */ if (extv[0]->sadb_ext_len == 0 || (void *)((uint64_t *)extv[0] + extv[0]->sadb_ext_len) > (void *)((uint8_t *)basehdr + msgsize)) return (KGE_LEN); /* Check for redundant headers. */ if (extv[extv[0]->sadb_ext_type] != NULL) return (KGE_DUP); /* * Reality check the extension if possible at the keysock * level. */ if (!ext_check(extv[0], keystack)) return (KGE_CHK); /* If I make it here, assign the appropriate bin. */ extv[extv[0]->sadb_ext_type] = extv[0]; /* Advance pointer (See above for uint64_t ptr reasoning.) */ extv[0] = (sadb_ext_t *) ((uint64_t *)extv[0] + extv[0]->sadb_ext_len); } /* Everything's cool. */ /* * If extv[0] == NULL, then there are no extension headers in this * message. Ensure that this is the case. */ if (extv[0] == (sadb_ext_t *)(basehdr + 1)) extv[0] = NULL; return (KGE_OK); } /* * qwriter() callback to handle flushes and dumps. This routine will hold * the inner perimeter. */ void keysock_do_flushdump(queue_t *q, mblk_t *mp) { int i, start, finish; mblk_t *mp1 = NULL; keysock_t *ks = (keysock_t *)q->q_ptr; sadb_ext_t *extv[SADB_EXT_MAX + 1]; sadb_msg_t *samsg = (sadb_msg_t *)mp->b_rptr; keysock_stack_t *keystack = ks->keysock_keystack; /* * I am guaranteed this will work. I did the work in keysock_parse() * already. */ (void) keysock_get_ext(extv, samsg, SADB_64TO8(samsg->sadb_msg_len), keystack); /* * I hold the perimeter, therefore I don't need to use atomic ops. */ if (keystack->keystack_flushdump != 0) { /* XXX Should I instead use EBUSY? */ /* XXX Or is there a way to queue these up? */ keysock_error(ks, mp, ENOMEM, SADB_X_DIAGNOSTIC_NONE); return; } if (samsg->sadb_msg_satype == SADB_SATYPE_UNSPEC) { start = 0; finish = KEYSOCK_MAX_CONSUMERS - 1; } else { start = samsg->sadb_msg_satype; finish = samsg->sadb_msg_satype; } /* * Fill up keysock_flushdump with the number of outstanding dumps * and/or flushes. */ keystack->keystack_flushdump_errno = 0; /* * Okay, I hold the perimeter. Eventually keysock_flushdump will * contain the number of consumers with outstanding flush operations. * * SO, here's the plan: * * For each relevant consumer (Might be one, might be all) * * Twiddle on the FLUSHING flag. * * Pass down the FLUSH/DUMP message. * * When I see upbound FLUSH/DUMP messages, I will decrement the * keysock_flushdump. When I decrement it to 0, I will pass the * FLUSH/DUMP message back up to the PF_KEY sockets. Because I will * pass down the right SA type to the consumer (either its own, or * that of UNSPEC), the right one will be reflected from each consumer, * and accordingly back to the socket. */ mutex_enter(&keystack->keystack_consumers_lock); for (i = start; i <= finish; i++) { if (keystack->keystack_consumers[i] != NULL) { mp1 = copymsg(mp); if (mp1 == NULL) { ks0dbg(("SADB_FLUSH copymsg() failed.\n")); /* * Error? And what about outstanding * flushes? Oh, yeah, they get sucked up and * the counter is decremented. Consumers * (see keysock_passdown()) are guaranteed * to deliver back a flush request, even if * it's an error. */ keysock_error(ks, mp, ENOMEM, SADB_X_DIAGNOSTIC_NONE); return; } /* * Because my entry conditions are met above, the * following assertion should hold true. */ mutex_enter(&keystack->keystack_consumers[i]->kc_lock); ASSERT((keystack->keystack_consumers[i]->kc_flags & KC_FLUSHING) == 0); keystack->keystack_consumers[i]->kc_flags |= KC_FLUSHING; mutex_exit(&(keystack->keystack_consumers[i]->kc_lock)); /* Always increment the number of flushes... */ keystack->keystack_flushdump++; /* Guaranteed to return a message. */ keysock_passdown(ks, mp1, i, extv, B_TRUE); } else if (start == finish) { /* * In case where start == finish, and there's no * consumer, should we force an error? Yes. */ mutex_exit(&keystack->keystack_consumers_lock); keysock_error(ks, mp, EINVAL, SADB_X_DIAGNOSTIC_UNKNOWN_SATYPE); return; } } mutex_exit(&keystack->keystack_consumers_lock); if (keystack->keystack_flushdump == 0) { /* * There were no consumers at all for this message. * XXX For now return ESRCH. */ keysock_error(ks, mp, ESRCH, SADB_X_DIAGNOSTIC_NO_SADBS); } else { /* Otherwise, free the original message. */ freemsg(mp); } } /* * Get the right diagnostic for a duplicate. Should probably use a static * table lookup. */ int keysock_duplicate(int ext_type) { int rc = 0; switch (ext_type) { case SADB_EXT_ADDRESS_SRC: rc = SADB_X_DIAGNOSTIC_DUPLICATE_SRC; break; case SADB_EXT_ADDRESS_DST: rc = SADB_X_DIAGNOSTIC_DUPLICATE_DST; break; case SADB_X_EXT_ADDRESS_INNER_SRC: rc = SADB_X_DIAGNOSTIC_DUPLICATE_INNER_SRC; break; case SADB_X_EXT_ADDRESS_INNER_DST: rc = SADB_X_DIAGNOSTIC_DUPLICATE_INNER_DST; break; case SADB_EXT_SA: rc = SADB_X_DIAGNOSTIC_DUPLICATE_SA; break; case SADB_EXT_SPIRANGE: rc = SADB_X_DIAGNOSTIC_DUPLICATE_RANGE; break; case SADB_EXT_KEY_AUTH: rc = SADB_X_DIAGNOSTIC_DUPLICATE_AKEY; break; case SADB_EXT_KEY_ENCRYPT: rc = SADB_X_DIAGNOSTIC_DUPLICATE_EKEY; break; } return (rc); } /* * Get the right diagnostic for a reality check failure. Should probably use * a static table lookup. */ int keysock_malformed(int ext_type) { int rc = 0; switch (ext_type) { case SADB_EXT_ADDRESS_SRC: rc = SADB_X_DIAGNOSTIC_MALFORMED_SRC; break; case SADB_EXT_ADDRESS_DST: rc = SADB_X_DIAGNOSTIC_MALFORMED_DST; break; case SADB_X_EXT_ADDRESS_INNER_SRC: rc = SADB_X_DIAGNOSTIC_MALFORMED_INNER_SRC; break; case SADB_X_EXT_ADDRESS_INNER_DST: rc = SADB_X_DIAGNOSTIC_MALFORMED_INNER_DST; break; case SADB_EXT_SA: rc = SADB_X_DIAGNOSTIC_MALFORMED_SA; break; case SADB_EXT_SPIRANGE: rc = SADB_X_DIAGNOSTIC_MALFORMED_RANGE; break; case SADB_EXT_KEY_AUTH: rc = SADB_X_DIAGNOSTIC_MALFORMED_AKEY; break; case SADB_EXT_KEY_ENCRYPT: rc = SADB_X_DIAGNOSTIC_MALFORMED_EKEY; break; } return (rc); } /* * Keysock massaging of an inverse ACQUIRE. Consult policy, * and construct an appropriate response. */ static void keysock_inverse_acquire(mblk_t *mp, sadb_msg_t *samsg, sadb_ext_t *extv[], keysock_t *ks) { mblk_t *reply_mp; keysock_stack_t *keystack = ks->keysock_keystack; /* * Reality check things... */ if (extv[SADB_EXT_ADDRESS_SRC] == NULL) { keysock_error(ks, mp, EINVAL, SADB_X_DIAGNOSTIC_MISSING_SRC); return; } if (extv[SADB_EXT_ADDRESS_DST] == NULL) { keysock_error(ks, mp, EINVAL, SADB_X_DIAGNOSTIC_MISSING_DST); return; } if (extv[SADB_X_EXT_ADDRESS_INNER_SRC] != NULL && extv[SADB_X_EXT_ADDRESS_INNER_DST] == NULL) { keysock_error(ks, mp, EINVAL, SADB_X_DIAGNOSTIC_MISSING_INNER_DST); return; } if (extv[SADB_X_EXT_ADDRESS_INNER_SRC] == NULL && extv[SADB_X_EXT_ADDRESS_INNER_DST] != NULL) { keysock_error(ks, mp, EINVAL, SADB_X_DIAGNOSTIC_MISSING_INNER_SRC); return; } reply_mp = ipsec_construct_inverse_acquire(samsg, extv, keystack->keystack_netstack); if (reply_mp != NULL) { freemsg(mp); keysock_passup(reply_mp, (sadb_msg_t *)reply_mp->b_rptr, ks->keysock_serial, NULL, B_FALSE, keystack); } else { keysock_error(ks, mp, samsg->sadb_msg_errno, samsg->sadb_x_msg_diagnostic); } } /* * Spew an extended REGISTER down to the relevant consumers. */ static void keysock_extended_register(keysock_t *ks, mblk_t *mp, sadb_ext_t *extv[]) { sadb_x_ereg_t *ereg = (sadb_x_ereg_t *)extv[SADB_X_EXT_EREG]; uint8_t *satypes, *fencepost; mblk_t *downmp; sadb_ext_t *downextv[SADB_EXT_MAX + 1]; keysock_stack_t *keystack = ks->keysock_keystack; if (ks->keysock_registered[0] != 0 || ks->keysock_registered[1] != 0 || ks->keysock_registered[2] != 0 || ks->keysock_registered[3] != 0) { keysock_error(ks, mp, EBUSY, 0); } ks->keysock_flags |= KEYSOCK_EXTENDED; if (ereg == NULL) { keysock_error(ks, mp, EINVAL, SADB_X_DIAGNOSTIC_SATYPE_NEEDED); } else { ASSERT(mp->b_rptr + msgdsize(mp) == mp->b_wptr); fencepost = (uint8_t *)mp->b_wptr; satypes = ereg->sadb_x_ereg_satypes; while (*satypes != SADB_SATYPE_UNSPEC && satypes != fencepost) { downmp = copymsg(mp); if (downmp == NULL) { keysock_error(ks, mp, ENOMEM, 0); return; } /* * Since we've made it here, keysock_get_ext will work! */ (void) keysock_get_ext(downextv, (sadb_msg_t *)downmp->b_rptr, msgdsize(downmp), keystack); keysock_passdown(ks, downmp, *satypes, downextv, B_FALSE); ++satypes; } freemsg(mp); } /* * Set global to indicate we prefer an extended ACQUIRE. */ atomic_inc_32(&keystack->keystack_num_extended); } static void keysock_delpair_all(keysock_t *ks, mblk_t *mp, sadb_ext_t *extv[]) { int i, start, finish; mblk_t *mp1 = NULL; keysock_stack_t *keystack = ks->keysock_keystack; start = 0; finish = KEYSOCK_MAX_CONSUMERS - 1; for (i = start; i <= finish; i++) { if (keystack->keystack_consumers[i] != NULL) { mp1 = copymsg(mp); if (mp1 == NULL) { keysock_error(ks, mp, ENOMEM, SADB_X_DIAGNOSTIC_NONE); return; } keysock_passdown(ks, mp1, i, extv, B_FALSE); } } } /* * Handle PF_KEY messages. */ static void keysock_parse(queue_t *q, mblk_t *mp) { sadb_msg_t *samsg; sadb_ext_t *extv[SADB_EXT_MAX + 1]; keysock_t *ks = (keysock_t *)q->q_ptr; uint_t msgsize; uint8_t satype; keysock_stack_t *keystack = ks->keysock_keystack; /* Make sure I'm a PF_KEY socket. (i.e. nothing's below me) */ ASSERT(WR(q)->q_next == NULL); samsg = (sadb_msg_t *)mp->b_rptr; ks2dbg(keystack, ("Received possible PF_KEY message, type %d.\n", samsg->sadb_msg_type)); msgsize = SADB_64TO8(samsg->sadb_msg_len); if (msgdsize(mp) != msgsize) { /* * Message len incorrect w.r.t. actual size. Send an error * (EMSGSIZE). It may be necessary to massage things a * bit. For example, if the sadb_msg_type is hosed, * I need to set it to SADB_RESERVED to get delivery to * do the right thing. Then again, maybe just letting * the error delivery do the right thing. */ ks2dbg(keystack, ("mblk (%lu) and base (%d) message sizes don't jibe.\n", msgdsize(mp), msgsize)); keysock_error(ks, mp, EMSGSIZE, SADB_X_DIAGNOSTIC_NONE); return; } if (msgsize > (uint_t)(mp->b_wptr - mp->b_rptr)) { /* Get all message into one mblk. */ if (pullupmsg(mp, -1) == 0) { /* * Something screwy happened. */ ks3dbg(keystack, ("keysock_parse: pullupmsg() failed.\n")); return; } else { samsg = (sadb_msg_t *)mp->b_rptr; } } switch (keysock_get_ext(extv, samsg, msgsize, keystack)) { case KGE_DUP: /* Handle duplicate extension. */ ks1dbg(keystack, ("Got duplicate extension of type %d.\n", extv[0]->sadb_ext_type)); keysock_error(ks, mp, EINVAL, keysock_duplicate(extv[0]->sadb_ext_type)); return; case KGE_UNK: /* Handle unknown extension. */ ks1dbg(keystack, ("Got unknown extension of type %d.\n", extv[0]->sadb_ext_type)); keysock_error(ks, mp, EINVAL, SADB_X_DIAGNOSTIC_UNKNOWN_EXT); return; case KGE_LEN: /* Length error. */ ks1dbg(keystack, ("Length %d on extension type %d overrun or 0.\n", extv[0]->sadb_ext_len, extv[0]->sadb_ext_type)); keysock_error(ks, mp, EINVAL, SADB_X_DIAGNOSTIC_BAD_EXTLEN); return; case KGE_CHK: /* Reality check failed. */ ks1dbg(keystack, ("Reality check failed on extension type %d.\n", extv[0]->sadb_ext_type)); keysock_error(ks, mp, EINVAL, keysock_malformed(extv[0]->sadb_ext_type)); return; default: /* Default case is no errors. */ break; } switch (samsg->sadb_msg_type) { case SADB_REGISTER: /* * There's a semantic weirdness in that a message OTHER than * the return REGISTER message may be passed up if I set the * registered bit BEFORE I pass it down. * * SOOOO, I'll not twiddle any registered bits until I see * the upbound REGISTER (with a serial number in it). */ if (samsg->sadb_msg_satype == SADB_SATYPE_UNSPEC) { /* Handle extended register here. */ keysock_extended_register(ks, mp, extv); return; } else if (ks->keysock_flags & KEYSOCK_EXTENDED) { keysock_error(ks, mp, EBUSY, 0); return; } /* FALLTHRU */ case SADB_GETSPI: case SADB_ADD: case SADB_UPDATE: case SADB_X_UPDATEPAIR: case SADB_DELETE: case SADB_X_DELPAIR: case SADB_GET: /* * Pass down to appropriate consumer. */ if (samsg->sadb_msg_satype != SADB_SATYPE_UNSPEC) keysock_passdown(ks, mp, samsg->sadb_msg_satype, extv, B_FALSE); else keysock_error(ks, mp, EINVAL, SADB_X_DIAGNOSTIC_SATYPE_NEEDED); return; case SADB_X_DELPAIR_STATE: if (samsg->sadb_msg_satype == SADB_SATYPE_UNSPEC) { keysock_delpair_all(ks, mp, extv); } else { keysock_passdown(ks, mp, samsg->sadb_msg_satype, extv, B_FALSE); } return; case SADB_ACQUIRE: /* * If I _receive_ an acquire, this means I should spread it * out to registered sockets. Unless there's an errno... * * Need ADDRESS, may have ID, SENS, and PROP, unless errno, * in which case there should be NO extensions. * * Return to registered. */ if (samsg->sadb_msg_errno != 0) { satype = samsg->sadb_msg_satype; if (satype == SADB_SATYPE_UNSPEC) { if (!(ks->keysock_flags & KEYSOCK_EXTENDED)) { keysock_error(ks, mp, EINVAL, SADB_X_DIAGNOSTIC_SATYPE_NEEDED); return; } /* * Reassign satype based on the first * flags that KEYSOCK_SETREG says. */ while (satype <= SADB_SATYPE_MAX) { if (KEYSOCK_ISREG(ks, satype)) break; satype++; } if (satype > SADB_SATYPE_MAX) { keysock_error(ks, mp, EBUSY, 0); return; } } keysock_passdown(ks, mp, satype, extv, B_FALSE); } else { if (samsg->sadb_msg_satype == SADB_SATYPE_UNSPEC) { keysock_error(ks, mp, EINVAL, SADB_X_DIAGNOSTIC_SATYPE_NEEDED); } else { keysock_passup(mp, samsg, 0, NULL, B_FALSE, keystack); } } return; case SADB_EXPIRE: /* * If someone sends this in, then send out to all senders. * (Save maybe ESP or AH, I have to be careful here.) * * Need ADDRESS, may have ID and SENS. * * XXX for now this is unsupported. */ break; case SADB_FLUSH: /* * Nuke all SAs. * * No extensions at all. Return to all listeners. * * Question: Should I hold a lock here to prevent * additions/deletions while flushing? * Answer: No. (See keysock_passdown() for details.) */ if (extv[0] != NULL) { /* * FLUSH messages shouldn't have extensions. * Return EINVAL. */ ks2dbg(keystack, ("FLUSH message with extension.\n")); keysock_error(ks, mp, EINVAL, SADB_X_DIAGNOSTIC_NO_EXT); return; } /* Passing down of DUMP/FLUSH messages are special. */ qwriter(q, mp, keysock_do_flushdump, PERIM_INNER); return; case SADB_DUMP: /* not used by normal applications */ if ((extv[0] != NULL) && ((msgsize > (sizeof (sadb_msg_t) + sizeof (sadb_x_edump_t))) || (extv[SADB_X_EXT_EDUMP] == NULL))) { keysock_error(ks, mp, EINVAL, SADB_X_DIAGNOSTIC_NO_EXT); return; } qwriter(q, mp, keysock_do_flushdump, PERIM_INNER); return; case SADB_X_PROMISC: /* * Promiscuous processing message. */ if (samsg->sadb_msg_satype == 0) ks->keysock_flags &= ~KEYSOCK_PROMISC; else ks->keysock_flags |= KEYSOCK_PROMISC; keysock_passup(mp, samsg, ks->keysock_serial, NULL, B_FALSE, keystack); return; case SADB_X_INVERSE_ACQUIRE: keysock_inverse_acquire(mp, samsg, extv, ks); return; default: ks2dbg(keystack, ("Got unknown message type %d.\n", samsg->sadb_msg_type)); keysock_error(ks, mp, EINVAL, SADB_X_DIAGNOSTIC_UNKNOWN_MSG); return; } /* As a placeholder... */ ks0dbg(("keysock_parse(): Hit EOPNOTSUPP\n")); keysock_error(ks, mp, EOPNOTSUPP, SADB_X_DIAGNOSTIC_NONE); } /* * wput routing for PF_KEY/keysock/whatever. Unlike the routing socket, * I don't convert to ioctl()'s for IP. I am the end-all driver as far * as PF_KEY sockets are concerned. I do some conversion, but not as much * as IP/rts does. */ static void keysock_wput(queue_t *q, mblk_t *mp) { uchar_t *rptr = mp->b_rptr; mblk_t *mp1; keysock_t *ks; keysock_stack_t *keystack; if (WR(q)->q_next) { keysock_consumer_t *kc = (keysock_consumer_t *)q->q_ptr; keystack = kc->kc_keystack; ks3dbg(keystack, ("In keysock_wput\n")); /* * We shouldn't get writes on a consumer instance. * But for now, just passthru. */ ks1dbg(keystack, ("Huh? wput for an consumer instance (%d)?\n", kc->kc_sa_type)); putnext(q, mp); return; } ks = (keysock_t *)q->q_ptr; keystack = ks->keysock_keystack; ks3dbg(keystack, ("In keysock_wput\n")); switch (mp->b_datap->db_type) { case M_DATA: /* * Silently discard. */ ks2dbg(keystack, ("raw M_DATA in keysock.\n")); freemsg(mp); return; case M_PROTO: case M_PCPROTO: if ((mp->b_wptr - rptr) >= sizeof (struct T_data_req)) { if (((union T_primitives *)rptr)->type == T_DATA_REQ) { if ((mp1 = mp->b_cont) == NULL) { /* No data after T_DATA_REQ. */ ks2dbg(keystack, ("No data after DATA_REQ.\n")); freemsg(mp); return; } freeb(mp); mp = mp1; ks2dbg(keystack, ("T_DATA_REQ\n")); break; /* Out of switch. */ } } /* FALLTHRU */ default: ks3dbg(keystack, ("In default wput case (%d %d).\n", mp->b_datap->db_type, ((union T_primitives *)rptr)->type)); keysock_wput_other(q, mp); return; } /* I now have a PF_KEY message in an M_DATA block, pointed to by mp. */ keysock_parse(q, mp); } /* BELOW THIS LINE ARE ROUTINES INCLUDING AND RELATED TO keysock_rput(). */ /* * Called upon receipt of a KEYSOCK_HELLO_ACK to set up the appropriate * state vectors. */ static void keysock_link_consumer(uint8_t satype, keysock_consumer_t *kc) { keysock_t *ks; keysock_stack_t *keystack = kc->kc_keystack; mutex_enter(&keystack->keystack_consumers_lock); mutex_enter(&kc->kc_lock); if (keystack->keystack_consumers[satype] != NULL) { ks0dbg(( "Hmmmm, someone closed %d before the HELLO_ACK happened.\n", satype)); /* * Perhaps updating the new below-me consumer with what I have * so far would work too? */ mutex_exit(&kc->kc_lock); mutex_exit(&keystack->keystack_consumers_lock); } else { /* Add new below-me consumer. */ keystack->keystack_consumers[satype] = kc; kc->kc_flags = 0; kc->kc_sa_type = satype; mutex_exit(&kc->kc_lock); mutex_exit(&keystack->keystack_consumers_lock); /* Scan the keysock list. */ mutex_enter(&keystack->keystack_list_lock); for (ks = keystack->keystack_list; ks != NULL; ks = ks->keysock_next) { if (KEYSOCK_ISREG(ks, satype)) { /* * XXX Perhaps send an SADB_REGISTER down on * the socket's behalf. */ ks1dbg(keystack, ("Socket %u registered already for " "new consumer.\n", ks->keysock_serial)); } } mutex_exit(&keystack->keystack_list_lock); } } /* * Generate a KEYSOCK_OUT_ERR message for my consumer. */ static void keysock_out_err(keysock_consumer_t *kc, int ks_errno, mblk_t *mp) { keysock_out_err_t *kse; mblk_t *imp; keysock_stack_t *keystack = kc->kc_keystack; imp = allocb(sizeof (ipsec_info_t), BPRI_HI); if (imp == NULL) { ks1dbg(keystack, ("keysock_out_err: Can't alloc message.\n")); return; } imp->b_datap->db_type = M_CTL; imp->b_wptr += sizeof (ipsec_info_t); kse = (keysock_out_err_t *)imp->b_rptr; imp->b_cont = mp; kse->ks_err_type = KEYSOCK_OUT_ERR; kse->ks_err_len = sizeof (*kse); /* Is serial necessary? */ kse->ks_err_serial = 0; kse->ks_err_errno = ks_errno; /* * XXX What else do I need to do here w.r.t. information * to tell the consumer what caused this error? * * I believe the answer is the PF_KEY ACQUIRE (or other) message * attached in mp, which is appended at the end. I believe the * db_ref won't matter here, because the PF_KEY message is only read * for KEYSOCK_OUT_ERR. */ putnext(kc->kc_wq, imp); } /* XXX this is a hack errno. */ #define EIPSECNOSA 255 /* * Route message (pointed by mp, header in samsg) toward appropriate * sockets. Assume the message's creator did its job correctly. * * This should be a function that is followed by a return in its caller. * The compiler _should_ be able to use tail-call optimizations to make the * large ## of parameters not a huge deal. */ static void keysock_passup(mblk_t *mp, sadb_msg_t *samsg, minor_t serial, keysock_consumer_t *kc, boolean_t persistent, keysock_stack_t *keystack) { keysock_t *ks; uint8_t satype = samsg->sadb_msg_satype; boolean_t toall = B_FALSE, allreg = B_FALSE, allereg = B_FALSE, setalg = B_FALSE; mblk_t *mp1; int err = EIPSECNOSA; /* Convert mp, which is M_DATA, into an M_PROTO of type T_DATA_IND */ mp1 = allocb(sizeof (struct T_data_req), BPRI_HI); if (mp1 == NULL) { err = ENOMEM; goto error; } mp1->b_wptr += sizeof (struct T_data_req); ((struct T_data_ind *)mp1->b_rptr)->PRIM_type = T_DATA_IND; ((struct T_data_ind *)mp1->b_rptr)->MORE_flag = 0; mp1->b_datap->db_type = M_PROTO; mp1->b_cont = mp; mp = mp1; switch (samsg->sadb_msg_type) { case SADB_FLUSH: case SADB_GETSPI: case SADB_UPDATE: case SADB_X_UPDATEPAIR: case SADB_ADD: case SADB_DELETE: case SADB_X_DELPAIR: case SADB_EXPIRE: /* * These are most likely replies. Don't worry about * KEYSOCK_OUT_ERR handling. Deliver to all sockets. */ ks3dbg(keystack, ("Delivering normal message (%d) to all sockets.\n", samsg->sadb_msg_type)); toall = B_TRUE; break; case SADB_REGISTER: /* * REGISTERs come up for one of three reasons: * * 1.) In response to a normal SADB_REGISTER * (samsg->sadb_msg_satype != SADB_SATYPE_UNSPEC && * serial != 0) * Deliver to normal SADB_REGISTERed sockets. * 2.) In response to an extended REGISTER * (samsg->sadb_msg_satype == SADB_SATYPE_UNSPEC) * Deliver to extended REGISTERed socket. * 3.) Spontaneous algorithm changes * (samsg->sadb_msg_satype != SADB_SATYPE_UNSPEC && * serial == 0) * Deliver to REGISTERed sockets of all sorts. */ if (kc == NULL) { /* Here because of keysock_error() call. */ ASSERT(samsg->sadb_msg_errno != 0); break; /* Out of switch. */ } ks3dbg(keystack, ("Delivering REGISTER.\n")); if (satype == SADB_SATYPE_UNSPEC) { /* REGISTER Reason #2 */ allereg = B_TRUE; /* * Rewhack SA type so PF_KEY socket holder knows what * consumer generated this algorithm list. */ satype = kc->kc_sa_type; samsg->sadb_msg_satype = satype; setalg = B_TRUE; } else if (serial == 0) { /* REGISTER Reason #3 */ allreg = B_TRUE; allereg = B_TRUE; } else { /* REGISTER Reason #1 */ allreg = B_TRUE; setalg = B_TRUE; } break; case SADB_ACQUIRE: /* * ACQUIREs are either extended (sadb_msg_satype == 0) or * regular (sadb_msg_satype != 0). And we're guaranteed * that serial == 0 for an ACQUIRE. */ ks3dbg(keystack, ("Delivering ACQUIRE.\n")); allereg = (satype == SADB_SATYPE_UNSPEC); allreg = !allereg; /* * Corner case - if we send a regular ACQUIRE and there's * extended ones registered, don't send an error down to * consumers if nobody's listening and prematurely destroy * their ACQUIRE record. This might be too hackish of a * solution. */ if (allreg && keystack->keystack_num_extended > 0) err = 0; break; case SADB_X_PROMISC: case SADB_X_INVERSE_ACQUIRE: case SADB_DUMP: case SADB_GET: default: /* * Deliver to the sender and promiscuous only. */ ks3dbg(keystack, ("Delivering sender/promisc only (%d).\n", samsg->sadb_msg_type)); break; } mutex_enter(&keystack->keystack_list_lock); for (ks = keystack->keystack_list; ks != NULL; ks = ks->keysock_next) { /* Delivery loop. */ /* * Check special keysock-setting cases (REGISTER replies) * here. */ if (setalg && serial == ks->keysock_serial) { ASSERT(kc != NULL); ASSERT(kc->kc_sa_type == satype); KEYSOCK_SETREG(ks, satype); } /* * NOLOOP takes precedence over PROMISC. So if you've set * !SO_USELOOPBACK, don't expect to see any data... */ if (ks->keysock_flags & KEYSOCK_NOLOOP) continue; /* * Messages to all, or promiscuous sockets just GET the * message. Perform rules-type checking iff it's not for all * listeners or the socket is in promiscuous mode. * * NOTE:Because of the (kc != NULL && ISREG()), make sure * extended ACQUIREs arrive off a consumer that is * part of the extended REGISTER set of consumers. */ if (serial != ks->keysock_serial && !toall && !(ks->keysock_flags & KEYSOCK_PROMISC) && !((ks->keysock_flags & KEYSOCK_EXTENDED) ? allereg : allreg && kc != NULL && KEYSOCK_ISREG(ks, kc->kc_sa_type))) continue; mp1 = dupmsg(mp); if (mp1 == NULL) { ks2dbg(keystack, ( "keysock_passup(): dupmsg() failed.\n")); mp1 = mp; mp = NULL; err = ENOMEM; } /* * At this point, we can deliver or attempt to deliver * this message. We're free of obligation to report * no listening PF_KEY sockets. So set err to 0. */ err = 0; /* * See if we canputnext(), as well as see if the message * needs to be queued if we can't. */ if (!canputnext(ks->keysock_rq)) { if (persistent) { if (putq(ks->keysock_rq, mp1) == 0) { ks1dbg(keystack, ( "keysock_passup: putq failed.\n")); } else { continue; } } freemsg(mp1); continue; } ks3dbg(keystack, ("Putting to serial %d.\n", ks->keysock_serial)); /* * Unlike the specific keysock instance case, this * will only hit for listeners, so we will only * putnext() if we can. */ putnext(ks->keysock_rq, mp1); if (mp == NULL) break; /* out of for loop. */ } mutex_exit(&keystack->keystack_list_lock); error: if ((err != 0) && (kc != NULL)) { /* * Generate KEYSOCK_OUT_ERR for consumer. * Basically, I send this back if I have not been able to * transmit (for whatever reason) */ ks1dbg(keystack, ("keysock_passup(): No registered of type %d.\n", satype)); if (mp != NULL) { if (mp->b_datap->db_type == M_PROTO) { mp1 = mp; mp = mp->b_cont; freeb(mp1); } /* * Do a copymsg() because people who get * KEYSOCK_OUT_ERR may alter the message contents. */ mp1 = copymsg(mp); if (mp1 == NULL) { ks2dbg(keystack, ("keysock_passup: copymsg() failed.\n")); mp1 = mp; mp = NULL; } keysock_out_err(kc, err, mp1); } } /* * XXX Blank the message somehow. This is difficult because we don't * know at this point if the message has db_ref > 1, etc. * * Optimally, keysock messages containing actual keying material would * be allocated with esballoc(), with a zeroing free function. */ if (mp != NULL) freemsg(mp); } /* * Keysock's read service procedure is there only for PF_KEY reply * messages that really need to reach the top. */ static void keysock_rsrv(queue_t *q) { mblk_t *mp; while ((mp = getq(q)) != NULL) { if (canputnext(q)) { putnext(q, mp); } else { (void) putbq(q, mp); return; } } } /* * The read procedure should only be invoked by a keysock consumer, like * ESP, AH, etc. I should only see KEYSOCK_OUT and KEYSOCK_HELLO_ACK * messages on my read queues. */ static void keysock_rput(queue_t *q, mblk_t *mp) { keysock_consumer_t *kc = (keysock_consumer_t *)q->q_ptr; ipsec_info_t *ii; keysock_hello_ack_t *ksa; minor_t serial; mblk_t *mp1; sadb_msg_t *samsg; keysock_stack_t *keystack = kc->kc_keystack; /* Make sure I'm a consumer instance. (i.e. something's below me) */ ASSERT(WR(q)->q_next != NULL); if (mp->b_datap->db_type != M_CTL) { /* * Keysock should only see keysock consumer interface * messages (see ipsec_info.h) on its read procedure. * To be robust, however, putnext() up so the STREAM head can * deal with it appropriately. */ ks1dbg(keystack, ("Hmmm, a non M_CTL (%d, 0x%x) on keysock_rput.\n", mp->b_datap->db_type, mp->b_datap->db_type)); putnext(q, mp); return; } ii = (ipsec_info_t *)mp->b_rptr; switch (ii->ipsec_info_type) { case KEYSOCK_OUT: /* * A consumer needs to pass a response message or an ACQUIRE * UP. I assume that the consumer has done the right * thing w.r.t. message creation, etc. */ serial = ((keysock_out_t *)mp->b_rptr)->ks_out_serial; mp1 = mp->b_cont; /* Get M_DATA portion. */ freeb(mp); samsg = (sadb_msg_t *)mp1->b_rptr; if (samsg->sadb_msg_type == SADB_FLUSH || (samsg->sadb_msg_type == SADB_DUMP && samsg->sadb_msg_len == SADB_8TO64(sizeof (*samsg)))) { /* * If I'm an end-of-FLUSH or an end-of-DUMP marker... */ ASSERT(keystack->keystack_flushdump != 0); /* Am I flushing? */ mutex_enter(&kc->kc_lock); kc->kc_flags &= ~KC_FLUSHING; mutex_exit(&kc->kc_lock); if (samsg->sadb_msg_errno != 0) keystack->keystack_flushdump_errno = samsg->sadb_msg_errno; /* * Lower the atomic "flushing" count. If it's * the last one, send up the end-of-{FLUSH,DUMP} to * the appropriate PF_KEY socket. */ if (atomic_dec_32_nv(&keystack->keystack_flushdump) != 0) { ks1dbg(keystack, ("One flush/dump message back from %d," " more to go.\n", samsg->sadb_msg_satype)); freemsg(mp1); return; } samsg->sadb_msg_errno = (uint8_t)keystack->keystack_flushdump_errno; if (samsg->sadb_msg_type == SADB_DUMP) { samsg->sadb_msg_seq = 0; } } keysock_passup(mp1, samsg, serial, kc, (samsg->sadb_msg_type == SADB_DUMP), keystack); return; case KEYSOCK_HELLO_ACK: /* Aha, now we can link in the consumer! */ ksa = (keysock_hello_ack_t *)ii; keysock_link_consumer(ksa->ks_hello_satype, kc); freemsg(mp); return; default: ks1dbg(keystack, ("Hmmm, an IPsec info I'm not used to, 0x%x\n", ii->ipsec_info_type)); putnext(q, mp); } } /* * So we can avoid external linking problems.... */ boolean_t keysock_extended_reg(netstack_t *ns) { keysock_stack_t *keystack = ns->netstack_keysock; return (keystack->keystack_num_extended != 0); } uint32_t keysock_next_seq(netstack_t *ns) { keysock_stack_t *keystack = ns->netstack_keysock; return (atomic_dec_32_nv(&keystack->keystack_acquire_seq)); }