/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2012, 2018 by Delphix. All rights reserved. * Copyright 2016 Nexenta Systems, Inc. All rights reserved. * Copyright 2019 Joyent, Inc. */ #include #include #include #include #include #include #include #include #include #include #include /* * Tunable parameter for debugging or performance analysis. Setting this * will cause pool corruption on power loss if a volatile out-of-order * write cache is enabled. */ boolean_t zfs_nocacheflush = B_FALSE; /* * Virtual device vector for disks. */ extern ldi_ident_t zfs_li; static void vdev_disk_close(vdev_t *); typedef struct vdev_disk_ldi_cb { list_node_t lcb_next; ldi_callback_id_t lcb_id; } vdev_disk_ldi_cb_t; /* * Bypass the devid when opening a disk vdev. * There have been issues where the devids of several devices were shuffled, * causing pool open failures. Note, that this flag is intended to be used * for pool recovery only. * * Note that if a pool is imported with the devids bypassed, all its vdevs will * cease storing devid information permanently. In practice, the devid is rarely * useful as vdev paths do not tend to change unless the hardware is * reconfigured. That said, if the paths do change and a pool fails to open * automatically at boot, a simple zpool import should re-scan the paths and fix * the issue. */ boolean_t vdev_disk_bypass_devid = B_FALSE; static void vdev_disk_alloc(vdev_t *vd) { vdev_disk_t *dvd; dvd = vd->vdev_tsd = kmem_zalloc(sizeof (vdev_disk_t), KM_SLEEP); /* * Create the LDI event callback list. */ list_create(&dvd->vd_ldi_cbs, sizeof (vdev_disk_ldi_cb_t), offsetof(vdev_disk_ldi_cb_t, lcb_next)); } static void vdev_disk_free(vdev_t *vd) { vdev_disk_t *dvd = vd->vdev_tsd; vdev_disk_ldi_cb_t *lcb; if (dvd == NULL) return; /* * We have already closed the LDI handle. Clean up the LDI event * callbacks and free vd->vdev_tsd. */ while ((lcb = list_head(&dvd->vd_ldi_cbs)) != NULL) { list_remove(&dvd->vd_ldi_cbs, lcb); (void) ldi_ev_remove_callbacks(lcb->lcb_id); kmem_free(lcb, sizeof (vdev_disk_ldi_cb_t)); } list_destroy(&dvd->vd_ldi_cbs); kmem_free(dvd, sizeof (vdev_disk_t)); vd->vdev_tsd = NULL; } /* ARGSUSED */ static int vdev_disk_off_notify(ldi_handle_t lh, ldi_ev_cookie_t ecookie, void *arg, void *ev_data) { vdev_t *vd = (vdev_t *)arg; vdev_disk_t *dvd = vd->vdev_tsd; /* * Ignore events other than offline. */ if (strcmp(ldi_ev_get_type(ecookie), LDI_EV_OFFLINE) != 0) return (LDI_EV_SUCCESS); /* * All LDI handles must be closed for the state change to succeed, so * call on vdev_disk_close() to do this. * * We inform vdev_disk_close that it is being called from offline * notify context so it will defer cleanup of LDI event callbacks and * freeing of vd->vdev_tsd to the offline finalize or a reopen. */ dvd->vd_ldi_offline = B_TRUE; vdev_disk_close(vd); /* * Now that the device is closed, request that the spa_async_thread * mark the device as REMOVED and notify FMA of the removal. */ zfs_post_remove(vd->vdev_spa, vd); vd->vdev_remove_wanted = B_TRUE; spa_async_request(vd->vdev_spa, SPA_ASYNC_REMOVE); return (LDI_EV_SUCCESS); } /* ARGSUSED */ static void vdev_disk_off_finalize(ldi_handle_t lh, ldi_ev_cookie_t ecookie, int ldi_result, void *arg, void *ev_data) { vdev_t *vd = (vdev_t *)arg; /* * Ignore events other than offline. */ if (strcmp(ldi_ev_get_type(ecookie), LDI_EV_OFFLINE) != 0) return; /* * We have already closed the LDI handle in notify. * Clean up the LDI event callbacks and free vd->vdev_tsd. */ vdev_disk_free(vd); /* * Request that the vdev be reopened if the offline state change was * unsuccessful. */ if (ldi_result != LDI_EV_SUCCESS) { vd->vdev_probe_wanted = B_TRUE; spa_async_request(vd->vdev_spa, SPA_ASYNC_PROBE); } } static ldi_ev_callback_t vdev_disk_off_callb = { .cb_vers = LDI_EV_CB_VERS, .cb_notify = vdev_disk_off_notify, .cb_finalize = vdev_disk_off_finalize }; /* ARGSUSED */ static void vdev_disk_dgrd_finalize(ldi_handle_t lh, ldi_ev_cookie_t ecookie, int ldi_result, void *arg, void *ev_data) { vdev_t *vd = (vdev_t *)arg; /* * Ignore events other than degrade. */ if (strcmp(ldi_ev_get_type(ecookie), LDI_EV_DEGRADE) != 0) return; /* * Degrade events always succeed. Mark the vdev as degraded. * This status is purely informative for the user. */ (void) vdev_degrade(vd->vdev_spa, vd->vdev_guid, 0); } static ldi_ev_callback_t vdev_disk_dgrd_callb = { .cb_vers = LDI_EV_CB_VERS, .cb_notify = NULL, .cb_finalize = vdev_disk_dgrd_finalize }; static void vdev_disk_hold(vdev_t *vd) { ddi_devid_t devid; char *minor; ASSERT(spa_config_held(vd->vdev_spa, SCL_STATE, RW_WRITER)); /* * We must have a pathname, and it must be absolute. */ if (vd->vdev_path == NULL || vd->vdev_path[0] != '/') return; /* * Only prefetch path and devid info if the device has * never been opened. */ if (vd->vdev_tsd != NULL) return; if (vd->vdev_wholedisk == -1ULL) { size_t len = strlen(vd->vdev_path) + 3; char *buf = kmem_alloc(len, KM_SLEEP); (void) snprintf(buf, len, "%ss0", vd->vdev_path); (void) ldi_vp_from_name(buf, &vd->vdev_name_vp); kmem_free(buf, len); } if (vd->vdev_name_vp == NULL) (void) ldi_vp_from_name(vd->vdev_path, &vd->vdev_name_vp); if (vd->vdev_devid != NULL && ddi_devid_str_decode(vd->vdev_devid, &devid, &minor) == 0) { (void) ldi_vp_from_devid(devid, minor, &vd->vdev_devid_vp); ddi_devid_str_free(minor); ddi_devid_free(devid); } } static void vdev_disk_rele(vdev_t *vd) { ASSERT(spa_config_held(vd->vdev_spa, SCL_STATE, RW_WRITER)); if (vd->vdev_name_vp) { VN_RELE_ASYNC(vd->vdev_name_vp, dsl_pool_vnrele_taskq(vd->vdev_spa->spa_dsl_pool)); vd->vdev_name_vp = NULL; } if (vd->vdev_devid_vp) { VN_RELE_ASYNC(vd->vdev_devid_vp, dsl_pool_vnrele_taskq(vd->vdev_spa->spa_dsl_pool)); vd->vdev_devid_vp = NULL; } } /* * We want to be loud in DEBUG kernels when DKIOCGMEDIAINFOEXT fails, or when * even a fallback to DKIOCGMEDIAINFO fails. */ #ifdef DEBUG #define VDEV_DEBUG(...) cmn_err(CE_NOTE, __VA_ARGS__) #else #define VDEV_DEBUG(...) /* Nothing... */ #endif static int vdev_disk_open(vdev_t *vd, uint64_t *psize, uint64_t *max_psize, uint64_t *ashift) { spa_t *spa = vd->vdev_spa; vdev_disk_t *dvd = vd->vdev_tsd; ldi_ev_cookie_t ecookie; vdev_disk_ldi_cb_t *lcb; union { struct dk_minfo_ext ude; struct dk_minfo ud; } dks; struct dk_minfo_ext *dkmext = &dks.ude; struct dk_minfo *dkm = &dks.ud; int error; dev_t dev; int otyp; boolean_t validate_devid = B_FALSE; ddi_devid_t devid; uint64_t capacity = 0, blksz = 0, pbsize; /* * We must have a pathname, and it must be absolute. */ if (vd->vdev_path == NULL || vd->vdev_path[0] != '/') { vd->vdev_stat.vs_aux = VDEV_AUX_BAD_LABEL; return (SET_ERROR(EINVAL)); } /* * Reopen the device if it's not currently open. Otherwise, * just update the physical size of the device. */ if (dvd != NULL) { if (dvd->vd_ldi_offline && dvd->vd_lh == NULL) { /* * If we are opening a device in its offline notify * context, the LDI handle was just closed. Clean * up the LDI event callbacks and free vd->vdev_tsd. */ vdev_disk_free(vd); } else { ASSERT(vd->vdev_reopening); goto skip_open; } } /* * Create vd->vdev_tsd. */ vdev_disk_alloc(vd); dvd = vd->vdev_tsd; /* * Allow bypassing the devid. */ if (vd->vdev_devid != NULL && vdev_disk_bypass_devid) { vdev_dbgmsg(vd, "vdev_disk_open, devid %s bypassed", vd->vdev_devid); spa_strfree(vd->vdev_devid); vd->vdev_devid = NULL; } /* * When opening a disk device, we want to preserve the user's original * intent. We always want to open the device by the path the user gave * us, even if it is one of multiple paths to the same device. But we * also want to be able to survive disks being removed/recabled. * Therefore the sequence of opening devices is: * * 1. Try opening the device by path. For legacy pools without the * 'whole_disk' property, attempt to fix the path by appending 's0'. * * 2. If the devid of the device matches the stored value, return * success. * * 3. Otherwise, the device may have moved. Try opening the device * by the devid instead. */ if (vd->vdev_devid != NULL) { if (ddi_devid_str_decode(vd->vdev_devid, &dvd->vd_devid, &dvd->vd_minor) != 0) { vd->vdev_stat.vs_aux = VDEV_AUX_BAD_LABEL; vdev_dbgmsg(vd, "vdev_disk_open: invalid " "vdev_devid '%s'", vd->vdev_devid); return (SET_ERROR(EINVAL)); } } error = EINVAL; /* presume failure */ if (vd->vdev_path != NULL) { if (vd->vdev_wholedisk == -1ULL) { size_t len = strlen(vd->vdev_path) + 3; char *buf = kmem_alloc(len, KM_SLEEP); (void) snprintf(buf, len, "%ss0", vd->vdev_path); error = ldi_open_by_name(buf, spa_mode(spa), kcred, &dvd->vd_lh, zfs_li); if (error == 0) { spa_strfree(vd->vdev_path); vd->vdev_path = buf; vd->vdev_wholedisk = 1ULL; } else { kmem_free(buf, len); } } /* * If we have not yet opened the device, try to open it by the * specified path. */ if (error != 0) { error = ldi_open_by_name(vd->vdev_path, spa_mode(spa), kcred, &dvd->vd_lh, zfs_li); } /* * Compare the devid to the stored value. */ if (error == 0 && vd->vdev_devid != NULL && ldi_get_devid(dvd->vd_lh, &devid) == 0) { if (ddi_devid_compare(devid, dvd->vd_devid) != 0) { /* * A mismatch here is unexpected, log it. */ char *devid_str = ddi_devid_str_encode(devid, dvd->vd_minor); vdev_dbgmsg(vd, "vdev_disk_open: devid " "mismatch: %s != %s", vd->vdev_devid, devid_str); cmn_err(CE_NOTE, "vdev_disk_open %s: devid " "mismatch: %s != %s", vd->vdev_path, vd->vdev_devid, devid_str); ddi_devid_str_free(devid_str); error = SET_ERROR(EINVAL); (void) ldi_close(dvd->vd_lh, spa_mode(spa), kcred); dvd->vd_lh = NULL; } ddi_devid_free(devid); } /* * If we succeeded in opening the device, but 'vdev_wholedisk' * is not yet set, then this must be a slice. */ if (error == 0 && vd->vdev_wholedisk == -1ULL) vd->vdev_wholedisk = 0; } /* * If we were unable to open by path, or the devid check fails, open by * devid instead. */ if (error != 0 && vd->vdev_devid != NULL) { error = ldi_open_by_devid(dvd->vd_devid, dvd->vd_minor, spa_mode(spa), kcred, &dvd->vd_lh, zfs_li); if (error != 0) { vdev_dbgmsg(vd, "Failed to open by devid (%s)", vd->vdev_devid); } } /* * If all else fails, then try opening by physical path (if available) * or the logical path (if we failed due to the devid check). While not * as reliable as the devid, this will give us something, and the higher * level vdev validation will prevent us from opening the wrong device. */ if (error) { if (vd->vdev_devid != NULL) validate_devid = B_TRUE; if (vd->vdev_physpath != NULL && (dev = ddi_pathname_to_dev_t(vd->vdev_physpath)) != NODEV) error = ldi_open_by_dev(&dev, OTYP_BLK, spa_mode(spa), kcred, &dvd->vd_lh, zfs_li); /* * Note that we don't support the legacy auto-wholedisk support * as above. This hasn't been used in a very long time and we * don't need to propagate its oddities to this edge condition. */ if (error && vd->vdev_path != NULL) error = ldi_open_by_name(vd->vdev_path, spa_mode(spa), kcred, &dvd->vd_lh, zfs_li); } if (error) { vd->vdev_stat.vs_aux = VDEV_AUX_OPEN_FAILED; vdev_dbgmsg(vd, "vdev_disk_open: failed to open [error=%d]", error); return (error); } /* * Now that the device has been successfully opened, update the devid * if necessary. */ if (validate_devid && spa_writeable(spa) && ldi_get_devid(dvd->vd_lh, &devid) == 0) { if (ddi_devid_compare(devid, dvd->vd_devid) != 0) { char *vd_devid; vd_devid = ddi_devid_str_encode(devid, dvd->vd_minor); vdev_dbgmsg(vd, "vdev_disk_open: update devid from " "'%s' to '%s'", vd->vdev_devid, vd_devid); cmn_err(CE_NOTE, "vdev_disk_open %s: update devid " "from '%s' to '%s'", vd->vdev_path != NULL ? vd->vdev_path : "?", vd->vdev_devid, vd_devid); spa_strfree(vd->vdev_devid); vd->vdev_devid = spa_strdup(vd_devid); ddi_devid_str_free(vd_devid); } ddi_devid_free(devid); } /* * Once a device is opened, verify that the physical device path (if * available) is up to date. */ if (ldi_get_dev(dvd->vd_lh, &dev) == 0 && ldi_get_otyp(dvd->vd_lh, &otyp) == 0) { char *physpath, *minorname; physpath = kmem_alloc(MAXPATHLEN, KM_SLEEP); minorname = NULL; if (ddi_dev_pathname(dev, otyp, physpath) == 0 && ldi_get_minor_name(dvd->vd_lh, &minorname) == 0 && (vd->vdev_physpath == NULL || strcmp(vd->vdev_physpath, physpath) != 0)) { if (vd->vdev_physpath) spa_strfree(vd->vdev_physpath); (void) strlcat(physpath, ":", MAXPATHLEN); (void) strlcat(physpath, minorname, MAXPATHLEN); vd->vdev_physpath = spa_strdup(physpath); } if (minorname) kmem_free(minorname, strlen(minorname) + 1); kmem_free(physpath, MAXPATHLEN); } /* * Register callbacks for the LDI offline event. */ if (ldi_ev_get_cookie(dvd->vd_lh, LDI_EV_OFFLINE, &ecookie) == LDI_EV_SUCCESS) { lcb = kmem_zalloc(sizeof (vdev_disk_ldi_cb_t), KM_SLEEP); list_insert_tail(&dvd->vd_ldi_cbs, lcb); (void) ldi_ev_register_callbacks(dvd->vd_lh, ecookie, &vdev_disk_off_callb, (void *) vd, &lcb->lcb_id); } /* * Register callbacks for the LDI degrade event. */ if (ldi_ev_get_cookie(dvd->vd_lh, LDI_EV_DEGRADE, &ecookie) == LDI_EV_SUCCESS) { lcb = kmem_zalloc(sizeof (vdev_disk_ldi_cb_t), KM_SLEEP); list_insert_tail(&dvd->vd_ldi_cbs, lcb); (void) ldi_ev_register_callbacks(dvd->vd_lh, ecookie, &vdev_disk_dgrd_callb, (void *) vd, &lcb->lcb_id); } skip_open: /* * Determine the actual size of the device. */ if (ldi_get_size(dvd->vd_lh, psize) != 0) { vd->vdev_stat.vs_aux = VDEV_AUX_OPEN_FAILED; vdev_dbgmsg(vd, "vdev_disk_open: failed to get size"); return (SET_ERROR(EINVAL)); } *max_psize = *psize; /* * Determine the device's minimum transfer size. * If the ioctl isn't supported, assume DEV_BSIZE. */ if ((error = ldi_ioctl(dvd->vd_lh, DKIOCGMEDIAINFOEXT, (intptr_t)dkmext, FKIOCTL, kcred, NULL)) == 0) { capacity = dkmext->dki_capacity - 1; blksz = dkmext->dki_lbsize; pbsize = dkmext->dki_pbsize; } else if ((error = ldi_ioctl(dvd->vd_lh, DKIOCGMEDIAINFO, (intptr_t)dkm, FKIOCTL, kcred, NULL)) == 0) { VDEV_DEBUG( "vdev_disk_open(\"%s\"): fallback to DKIOCGMEDIAINFO\n", vd->vdev_path); capacity = dkm->dki_capacity - 1; blksz = dkm->dki_lbsize; pbsize = blksz; } else { VDEV_DEBUG("vdev_disk_open(\"%s\"): " "both DKIOCGMEDIAINFO{,EXT} calls failed, %d\n", vd->vdev_path, error); pbsize = DEV_BSIZE; } *ashift = highbit64(MAX(pbsize, SPA_MINBLOCKSIZE)) - 1; if (vd->vdev_wholedisk == 1) { int wce = 1; if (error == 0) { /* * If we have the capability to expand, we'd have * found out via success from DKIOCGMEDIAINFO{,EXT}. * Adjust max_psize upward accordingly since we know * we own the whole disk now. */ *max_psize = capacity * blksz; } /* * Since we own the whole disk, try to enable disk write * caching. We ignore errors because it's OK if we can't do it. */ (void) ldi_ioctl(dvd->vd_lh, DKIOCSETWCE, (intptr_t)&wce, FKIOCTL, kcred, NULL); } /* * Clear the nowritecache bit, so that on a vdev_reopen() we will * try again. */ vd->vdev_nowritecache = B_FALSE; /* Inform the ZIO pipeline that we are non-rotational */ vd->vdev_nonrot = B_FALSE; if (ldi_prop_exists(dvd->vd_lh, DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "device-solid-state")) { if (ldi_prop_get_int(dvd->vd_lh, LDI_DEV_T_ANY | DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "device-solid-state", B_FALSE) != 0) vd->vdev_nonrot = B_TRUE; } return (0); } static void vdev_disk_close(vdev_t *vd) { vdev_disk_t *dvd = vd->vdev_tsd; if (vd->vdev_reopening || dvd == NULL) return; if (dvd->vd_minor != NULL) { ddi_devid_str_free(dvd->vd_minor); dvd->vd_minor = NULL; } if (dvd->vd_devid != NULL) { ddi_devid_free(dvd->vd_devid); dvd->vd_devid = NULL; } if (dvd->vd_lh != NULL) { (void) ldi_close(dvd->vd_lh, spa_mode(vd->vdev_spa), kcred); dvd->vd_lh = NULL; } vd->vdev_delayed_close = B_FALSE; /* * If we closed the LDI handle due to an offline notify from LDI, * don't free vd->vdev_tsd or unregister the callbacks here; * the offline finalize callback or a reopen will take care of it. */ if (dvd->vd_ldi_offline) return; vdev_disk_free(vd); } int vdev_disk_physio(vdev_t *vd, caddr_t data, size_t size, uint64_t offset, int flags, boolean_t isdump) { vdev_disk_t *dvd = vd->vdev_tsd; /* * If the vdev is closed, it's likely in the REMOVED or FAULTED state. * Nothing to be done here but return failure. */ if (dvd == NULL || (dvd->vd_ldi_offline && dvd->vd_lh == NULL)) return (EIO); ASSERT(vd->vdev_ops == &vdev_disk_ops); /* * If in the context of an active crash dump, use the ldi_dump(9F) * call instead of ldi_strategy(9F) as usual. */ if (isdump) { ASSERT3P(dvd, !=, NULL); return (ldi_dump(dvd->vd_lh, data, lbtodb(offset), lbtodb(size))); } return (vdev_disk_ldi_physio(dvd->vd_lh, data, size, offset, flags)); } int vdev_disk_ldi_physio(ldi_handle_t vd_lh, caddr_t data, size_t size, uint64_t offset, int flags) { buf_t *bp; int error = 0; if (vd_lh == NULL) return (SET_ERROR(EINVAL)); ASSERT(flags & B_READ || flags & B_WRITE); bp = getrbuf(KM_SLEEP); bp->b_flags = flags | B_BUSY | B_NOCACHE | B_FAILFAST; bp->b_bcount = size; bp->b_un.b_addr = (void *)data; bp->b_lblkno = lbtodb(offset); bp->b_bufsize = size; error = ldi_strategy(vd_lh, bp); ASSERT(error == 0); if ((error = biowait(bp)) == 0 && bp->b_resid != 0) error = SET_ERROR(EIO); freerbuf(bp); return (error); } static int vdev_disk_io_intr(buf_t *bp) { vdev_buf_t *vb = (vdev_buf_t *)bp; zio_t *zio = vb->vb_io; /* * The rest of the zio stack only deals with EIO, ECKSUM, and ENXIO. * Rather than teach the rest of the stack about other error * possibilities (EFAULT, etc), we normalize the error value here. */ zio->io_error = (geterror(bp) != 0 ? EIO : 0); if (zio->io_error == 0 && bp->b_resid != 0) zio->io_error = SET_ERROR(EIO); if (zio->io_type == ZIO_TYPE_READ) { abd_return_buf_copy(zio->io_abd, bp->b_un.b_addr, zio->io_size); } else { abd_return_buf(zio->io_abd, bp->b_un.b_addr, zio->io_size); } kmem_free(vb, sizeof (vdev_buf_t)); zio_delay_interrupt(zio); return (0); } static void vdev_disk_ioctl_free(zio_t *zio) { kmem_free(zio->io_vsd, sizeof (struct dk_callback)); } static const zio_vsd_ops_t vdev_disk_vsd_ops = { vdev_disk_ioctl_free, zio_vsd_default_cksum_report }; static void vdev_disk_ioctl_done(void *zio_arg, int error) { zio_t *zio = zio_arg; zio->io_error = error; zio_interrupt(zio); } static void vdev_disk_io_start(zio_t *zio) { vdev_t *vd = zio->io_vd; vdev_disk_t *dvd = vd->vdev_tsd; vdev_buf_t *vb; struct dk_callback *dkc; buf_t *bp; int error; /* * If the vdev is closed, it's likely in the REMOVED or FAULTED state. * Nothing to be done here but return failure. */ if (dvd == NULL || (dvd->vd_ldi_offline && dvd->vd_lh == NULL)) { zio->io_error = ENXIO; zio_interrupt(zio); return; } if (zio->io_type == ZIO_TYPE_IOCTL) { /* XXPOLICY */ if (!vdev_readable(vd)) { zio->io_error = SET_ERROR(ENXIO); zio_interrupt(zio); return; } switch (zio->io_cmd) { case DKIOCFLUSHWRITECACHE: if (zfs_nocacheflush) break; if (vd->vdev_nowritecache) { zio->io_error = SET_ERROR(ENOTSUP); break; } zio->io_vsd = dkc = kmem_alloc(sizeof (*dkc), KM_SLEEP); zio->io_vsd_ops = &vdev_disk_vsd_ops; dkc->dkc_callback = vdev_disk_ioctl_done; dkc->dkc_flag = FLUSH_VOLATILE; dkc->dkc_cookie = zio; error = ldi_ioctl(dvd->vd_lh, zio->io_cmd, (uintptr_t)dkc, FKIOCTL, kcred, NULL); if (error == 0) { /* * The ioctl will be done asychronously, * and will call vdev_disk_ioctl_done() * upon completion. */ return; } zio->io_error = error; break; default: zio->io_error = SET_ERROR(ENOTSUP); } zio_execute(zio); return; } ASSERT(zio->io_type == ZIO_TYPE_READ || zio->io_type == ZIO_TYPE_WRITE); zio->io_target_timestamp = zio_handle_io_delay(zio); vb = kmem_alloc(sizeof (vdev_buf_t), KM_SLEEP); vb->vb_io = zio; bp = &vb->vb_buf; bioinit(bp); bp->b_flags = B_BUSY | B_NOCACHE | (zio->io_type == ZIO_TYPE_READ ? B_READ : B_WRITE); if (!(zio->io_flags & (ZIO_FLAG_IO_RETRY | ZIO_FLAG_TRYHARD))) bp->b_flags |= B_FAILFAST; bp->b_bcount = zio->io_size; if (zio->io_type == ZIO_TYPE_READ) { bp->b_un.b_addr = abd_borrow_buf(zio->io_abd, zio->io_size); } else { bp->b_un.b_addr = abd_borrow_buf_copy(zio->io_abd, zio->io_size); } bp->b_lblkno = lbtodb(zio->io_offset); bp->b_bufsize = zio->io_size; bp->b_iodone = vdev_disk_io_intr; /* * In general we would expect ldi_strategy() to return non-zero only * because of programming errors, but we've also seen this fail shortly * after a disk dies. */ if (ldi_strategy(dvd->vd_lh, bp) != 0) { zio->io_error = ENXIO; zio_interrupt(zio); } } static void vdev_disk_io_done(zio_t *zio) { vdev_t *vd = zio->io_vd; /* * If the device returned EIO, then attempt a DKIOCSTATE ioctl to see if * the device has been removed. If this is the case, then we trigger an * asynchronous removal of the device. Otherwise, probe the device and * make sure it's still accessible. */ if (zio->io_error == EIO && !vd->vdev_remove_wanted) { vdev_disk_t *dvd = vd->vdev_tsd; int state = DKIO_NONE; if (ldi_ioctl(dvd->vd_lh, DKIOCSTATE, (intptr_t)&state, FKIOCTL, kcred, NULL) == 0 && state != DKIO_INSERTED) { /* * We post the resource as soon as possible, instead of * when the async removal actually happens, because the * DE is using this information to discard previous I/O * errors. */ zfs_post_remove(zio->io_spa, vd); vd->vdev_remove_wanted = B_TRUE; spa_async_request(zio->io_spa, SPA_ASYNC_REMOVE); } else if (!vd->vdev_delayed_close) { vd->vdev_delayed_close = B_TRUE; } } } vdev_ops_t vdev_disk_ops = { .vdev_op_open = vdev_disk_open, .vdev_op_close = vdev_disk_close, .vdev_op_asize = vdev_default_asize, .vdev_op_io_start = vdev_disk_io_start, .vdev_op_io_done = vdev_disk_io_done, .vdev_op_state_change = NULL, .vdev_op_need_resilver = NULL, .vdev_op_hold = vdev_disk_hold, .vdev_op_rele = vdev_disk_rele, .vdev_op_remap = NULL, .vdev_op_xlate = vdev_default_xlate, .vdev_op_type = VDEV_TYPE_DISK, /* name of this vdev type */ .vdev_op_leaf = B_TRUE /* leaf vdev */ }; /* * Given the root disk device devid or pathname, read the label from * the device, and construct a configuration nvlist. */ int vdev_disk_read_rootlabel(char *devpath, char *devid, nvlist_t **config) { ldi_handle_t vd_lh; vdev_label_t *label; uint64_t s, size; int l; ddi_devid_t tmpdevid; int error = -1; char *minor_name; /* * Read the device label and build the nvlist. */ if (devid != NULL && ddi_devid_str_decode(devid, &tmpdevid, &minor_name) == 0) { error = ldi_open_by_devid(tmpdevid, minor_name, FREAD, kcred, &vd_lh, zfs_li); ddi_devid_free(tmpdevid); ddi_devid_str_free(minor_name); } if (error && (error = ldi_open_by_name(devpath, FREAD, kcred, &vd_lh, zfs_li))) return (error); if (ldi_get_size(vd_lh, &s)) { (void) ldi_close(vd_lh, FREAD, kcred); return (SET_ERROR(EIO)); } size = P2ALIGN_TYPED(s, sizeof (vdev_label_t), uint64_t); label = kmem_alloc(sizeof (vdev_label_t), KM_SLEEP); *config = NULL; for (l = 0; l < VDEV_LABELS; l++) { uint64_t offset, state, txg = 0; /* read vdev label */ offset = vdev_label_offset(size, l, 0); if (vdev_disk_ldi_physio(vd_lh, (caddr_t)label, VDEV_SKIP_SIZE + VDEV_PHYS_SIZE, offset, B_READ) != 0) continue; if (nvlist_unpack(label->vl_vdev_phys.vp_nvlist, sizeof (label->vl_vdev_phys.vp_nvlist), config, 0) != 0) { *config = NULL; continue; } if (nvlist_lookup_uint64(*config, ZPOOL_CONFIG_POOL_STATE, &state) != 0 || state >= POOL_STATE_DESTROYED) { nvlist_free(*config); *config = NULL; continue; } if (nvlist_lookup_uint64(*config, ZPOOL_CONFIG_POOL_TXG, &txg) != 0 || txg == 0) { nvlist_free(*config); *config = NULL; continue; } break; } kmem_free(label, sizeof (vdev_label_t)); (void) ldi_close(vd_lh, FREAD, kcred); if (*config == NULL) error = SET_ERROR(EIDRM); return (error); }