/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2011, 2017 by Delphix. All rights reserved. * Copyright (c) 2013 Steven Hartland. All rights reserved. * Copyright (c) 2014 Spectra Logic Corporation, All rights reserved. * Copyright (c) 2014 Integros [integros.com] * Copyright 2016 Nexenta Systems, Inc. All rights reserved. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * ZFS Write Throttle * ------------------ * * ZFS must limit the rate of incoming writes to the rate at which it is able * to sync data modifications to the backend storage. Throttling by too much * creates an artificial limit; throttling by too little can only be sustained * for short periods and would lead to highly lumpy performance. On a per-pool * basis, ZFS tracks the amount of modified (dirty) data. As operations change * data, the amount of dirty data increases; as ZFS syncs out data, the amount * of dirty data decreases. When the amount of dirty data exceeds a * predetermined threshold further modifications are blocked until the amount * of dirty data decreases (as data is synced out). * * The limit on dirty data is tunable, and should be adjusted according to * both the IO capacity and available memory of the system. The larger the * window, the more ZFS is able to aggregate and amortize metadata (and data) * changes. However, memory is a limited resource, and allowing for more dirty * data comes at the cost of keeping other useful data in memory (for example * ZFS data cached by the ARC). * * Implementation * * As buffers are modified dsl_pool_willuse_space() increments both the per- * txg (dp_dirty_pertxg[]) and poolwide (dp_dirty_total) accounting of * dirty space used; dsl_pool_dirty_space() decrements those values as data * is synced out from dsl_pool_sync(). While only the poolwide value is * relevant, the per-txg value is useful for debugging. The tunable * zfs_dirty_data_max determines the dirty space limit. Once that value is * exceeded, new writes are halted until space frees up. * * The zfs_dirty_data_sync tunable dictates the threshold at which we * ensure that there is a txg syncing (see the comment in txg.c for a full * description of transaction group stages). * * The IO scheduler uses both the dirty space limit and current amount of * dirty data as inputs. Those values affect the number of concurrent IOs ZFS * issues. See the comment in vdev_queue.c for details of the IO scheduler. * * The delay is also calculated based on the amount of dirty data. See the * comment above dmu_tx_delay() for details. */ /* * zfs_dirty_data_max will be set to zfs_dirty_data_max_percent% of all memory, * capped at zfs_dirty_data_max_max. It can also be overridden in /etc/system. */ uint64_t zfs_dirty_data_max; uint64_t zfs_dirty_data_max_max = 4ULL * 1024 * 1024 * 1024; int zfs_dirty_data_max_percent = 10; /* * If there is at least this much dirty data, push out a txg. */ uint64_t zfs_dirty_data_sync = 64 * 1024 * 1024; /* * Once there is this amount of dirty data, the dmu_tx_delay() will kick in * and delay each transaction. * This value should be >= zfs_vdev_async_write_active_max_dirty_percent. */ int zfs_delay_min_dirty_percent = 60; /* * This controls how quickly the delay approaches infinity. * Larger values cause it to delay more for a given amount of dirty data. * Therefore larger values will cause there to be less dirty data for a * given throughput. * * For the smoothest delay, this value should be about 1 billion divided * by the maximum number of operations per second. This will smoothly * handle between 10x and 1/10th this number. * * Note: zfs_delay_scale * zfs_dirty_data_max must be < 2^64, due to the * multiply in dmu_tx_delay(). */ uint64_t zfs_delay_scale = 1000 * 1000 * 1000 / 2000; /* * This determines the number of threads used by the dp_sync_taskq. */ int zfs_sync_taskq_batch_pct = 75; /* * These tunables determine the behavior of how zil_itxg_clean() is * called via zil_clean() in the context of spa_sync(). When an itxg * list needs to be cleaned, TQ_NOSLEEP will be used when dispatching. * If the dispatch fails, the call to zil_itxg_clean() will occur * synchronously in the context of spa_sync(), which can negatively * impact the performance of spa_sync() (e.g. in the case of the itxg * list having a large number of itxs that needs to be cleaned). * * Thus, these tunables can be used to manipulate the behavior of the * taskq used by zil_clean(); they determine the number of taskq entries * that are pre-populated when the taskq is first created (via the * "zfs_zil_clean_taskq_minalloc" tunable) and the maximum number of * taskq entries that are cached after an on-demand allocation (via the * "zfs_zil_clean_taskq_maxalloc"). * * The idea being, we want to try reasonably hard to ensure there will * already be a taskq entry pre-allocated by the time that it is needed * by zil_clean(). This way, we can avoid the possibility of an * on-demand allocation of a new taskq entry from failing, which would * result in zil_itxg_clean() being called synchronously from zil_clean() * (which can adversely affect performance of spa_sync()). * * Additionally, the number of threads used by the taskq can be * configured via the "zfs_zil_clean_taskq_nthr_pct" tunable. */ int zfs_zil_clean_taskq_nthr_pct = 100; int zfs_zil_clean_taskq_minalloc = 1024; int zfs_zil_clean_taskq_maxalloc = 1024 * 1024; int dsl_pool_open_special_dir(dsl_pool_t *dp, const char *name, dsl_dir_t **ddp) { uint64_t obj; int err; err = zap_lookup(dp->dp_meta_objset, dsl_dir_phys(dp->dp_root_dir)->dd_child_dir_zapobj, name, sizeof (obj), 1, &obj); if (err) return (err); return (dsl_dir_hold_obj(dp, obj, name, dp, ddp)); } static dsl_pool_t * dsl_pool_open_impl(spa_t *spa, uint64_t txg) { dsl_pool_t *dp; blkptr_t *bp = spa_get_rootblkptr(spa); dp = kmem_zalloc(sizeof (dsl_pool_t), KM_SLEEP); dp->dp_spa = spa; dp->dp_meta_rootbp = *bp; rrw_init(&dp->dp_config_rwlock, B_TRUE); txg_init(dp, txg); txg_list_create(&dp->dp_dirty_datasets, spa, offsetof(dsl_dataset_t, ds_dirty_link)); txg_list_create(&dp->dp_dirty_zilogs, spa, offsetof(zilog_t, zl_dirty_link)); txg_list_create(&dp->dp_dirty_dirs, spa, offsetof(dsl_dir_t, dd_dirty_link)); txg_list_create(&dp->dp_sync_tasks, spa, offsetof(dsl_sync_task_t, dst_node)); dp->dp_sync_taskq = taskq_create("dp_sync_taskq", zfs_sync_taskq_batch_pct, minclsyspri, 1, INT_MAX, TASKQ_THREADS_CPU_PCT); dp->dp_zil_clean_taskq = taskq_create("dp_zil_clean_taskq", zfs_zil_clean_taskq_nthr_pct, minclsyspri, zfs_zil_clean_taskq_minalloc, zfs_zil_clean_taskq_maxalloc, TASKQ_PREPOPULATE | TASKQ_THREADS_CPU_PCT); mutex_init(&dp->dp_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&dp->dp_spaceavail_cv, NULL, CV_DEFAULT, NULL); dp->dp_vnrele_taskq = taskq_create("zfs_vn_rele_taskq", 1, minclsyspri, 1, 4, 0); return (dp); } int dsl_pool_init(spa_t *spa, uint64_t txg, dsl_pool_t **dpp) { int err; dsl_pool_t *dp = dsl_pool_open_impl(spa, txg); err = dmu_objset_open_impl(spa, NULL, &dp->dp_meta_rootbp, &dp->dp_meta_objset); if (err != 0) dsl_pool_close(dp); else *dpp = dp; return (err); } int dsl_pool_open(dsl_pool_t *dp) { int err; dsl_dir_t *dd; dsl_dataset_t *ds; uint64_t obj; rrw_enter(&dp->dp_config_rwlock, RW_WRITER, FTAG); err = zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_ROOT_DATASET, sizeof (uint64_t), 1, &dp->dp_root_dir_obj); if (err) goto out; err = dsl_dir_hold_obj(dp, dp->dp_root_dir_obj, NULL, dp, &dp->dp_root_dir); if (err) goto out; err = dsl_pool_open_special_dir(dp, MOS_DIR_NAME, &dp->dp_mos_dir); if (err) goto out; if (spa_version(dp->dp_spa) >= SPA_VERSION_ORIGIN) { err = dsl_pool_open_special_dir(dp, ORIGIN_DIR_NAME, &dd); if (err) goto out; err = dsl_dataset_hold_obj(dp, dsl_dir_phys(dd)->dd_head_dataset_obj, FTAG, &ds); if (err == 0) { err = dsl_dataset_hold_obj(dp, dsl_dataset_phys(ds)->ds_prev_snap_obj, dp, &dp->dp_origin_snap); dsl_dataset_rele(ds, FTAG); } dsl_dir_rele(dd, dp); if (err) goto out; } if (spa_version(dp->dp_spa) >= SPA_VERSION_DEADLISTS) { err = dsl_pool_open_special_dir(dp, FREE_DIR_NAME, &dp->dp_free_dir); if (err) goto out; err = zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_FREE_BPOBJ, sizeof (uint64_t), 1, &obj); if (err) goto out; VERIFY0(bpobj_open(&dp->dp_free_bpobj, dp->dp_meta_objset, obj)); } /* * Note: errors ignored, because the leak dir will not exist if we * have not encountered a leak yet. */ (void) dsl_pool_open_special_dir(dp, LEAK_DIR_NAME, &dp->dp_leak_dir); if (spa_feature_is_active(dp->dp_spa, SPA_FEATURE_ASYNC_DESTROY)) { err = zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_BPTREE_OBJ, sizeof (uint64_t), 1, &dp->dp_bptree_obj); if (err != 0) goto out; } if (spa_feature_is_active(dp->dp_spa, SPA_FEATURE_EMPTY_BPOBJ)) { err = zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_EMPTY_BPOBJ, sizeof (uint64_t), 1, &dp->dp_empty_bpobj); if (err != 0) goto out; } err = zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_TMP_USERREFS, sizeof (uint64_t), 1, &dp->dp_tmp_userrefs_obj); if (err == ENOENT) err = 0; if (err) goto out; err = dsl_scan_init(dp, dp->dp_tx.tx_open_txg); out: rrw_exit(&dp->dp_config_rwlock, FTAG); return (err); } void dsl_pool_close(dsl_pool_t *dp) { /* * Drop our references from dsl_pool_open(). * * Since we held the origin_snap from "syncing" context (which * includes pool-opening context), it actually only got a "ref" * and not a hold, so just drop that here. */ if (dp->dp_origin_snap) dsl_dataset_rele(dp->dp_origin_snap, dp); if (dp->dp_mos_dir) dsl_dir_rele(dp->dp_mos_dir, dp); if (dp->dp_free_dir) dsl_dir_rele(dp->dp_free_dir, dp); if (dp->dp_leak_dir) dsl_dir_rele(dp->dp_leak_dir, dp); if (dp->dp_root_dir) dsl_dir_rele(dp->dp_root_dir, dp); bpobj_close(&dp->dp_free_bpobj); /* undo the dmu_objset_open_impl(mos) from dsl_pool_open() */ if (dp->dp_meta_objset) dmu_objset_evict(dp->dp_meta_objset); txg_list_destroy(&dp->dp_dirty_datasets); txg_list_destroy(&dp->dp_dirty_zilogs); txg_list_destroy(&dp->dp_sync_tasks); txg_list_destroy(&dp->dp_dirty_dirs); taskq_destroy(dp->dp_zil_clean_taskq); taskq_destroy(dp->dp_sync_taskq); /* * We can't set retry to TRUE since we're explicitly specifying * a spa to flush. This is good enough; any missed buffers for * this spa won't cause trouble, and they'll eventually fall * out of the ARC just like any other unused buffer. */ arc_flush(dp->dp_spa, FALSE); txg_fini(dp); dsl_scan_fini(dp); dmu_buf_user_evict_wait(); rrw_destroy(&dp->dp_config_rwlock); mutex_destroy(&dp->dp_lock); taskq_destroy(dp->dp_vnrele_taskq); if (dp->dp_blkstats) kmem_free(dp->dp_blkstats, sizeof (zfs_all_blkstats_t)); kmem_free(dp, sizeof (dsl_pool_t)); } dsl_pool_t * dsl_pool_create(spa_t *spa, nvlist_t *zplprops, uint64_t txg) { int err; dsl_pool_t *dp = dsl_pool_open_impl(spa, txg); dmu_tx_t *tx = dmu_tx_create_assigned(dp, txg); dsl_dataset_t *ds; uint64_t obj; rrw_enter(&dp->dp_config_rwlock, RW_WRITER, FTAG); /* create and open the MOS (meta-objset) */ dp->dp_meta_objset = dmu_objset_create_impl(spa, NULL, &dp->dp_meta_rootbp, DMU_OST_META, tx); /* create the pool directory */ err = zap_create_claim(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_OT_OBJECT_DIRECTORY, DMU_OT_NONE, 0, tx); ASSERT0(err); /* Initialize scan structures */ VERIFY0(dsl_scan_init(dp, txg)); /* create and open the root dir */ dp->dp_root_dir_obj = dsl_dir_create_sync(dp, NULL, NULL, tx); VERIFY0(dsl_dir_hold_obj(dp, dp->dp_root_dir_obj, NULL, dp, &dp->dp_root_dir)); /* create and open the meta-objset dir */ (void) dsl_dir_create_sync(dp, dp->dp_root_dir, MOS_DIR_NAME, tx); VERIFY0(dsl_pool_open_special_dir(dp, MOS_DIR_NAME, &dp->dp_mos_dir)); if (spa_version(spa) >= SPA_VERSION_DEADLISTS) { /* create and open the free dir */ (void) dsl_dir_create_sync(dp, dp->dp_root_dir, FREE_DIR_NAME, tx); VERIFY0(dsl_pool_open_special_dir(dp, FREE_DIR_NAME, &dp->dp_free_dir)); /* create and open the free_bplist */ obj = bpobj_alloc(dp->dp_meta_objset, SPA_OLD_MAXBLOCKSIZE, tx); VERIFY(zap_add(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_FREE_BPOBJ, sizeof (uint64_t), 1, &obj, tx) == 0); VERIFY0(bpobj_open(&dp->dp_free_bpobj, dp->dp_meta_objset, obj)); } if (spa_version(spa) >= SPA_VERSION_DSL_SCRUB) dsl_pool_create_origin(dp, tx); /* create the root dataset */ obj = dsl_dataset_create_sync_dd(dp->dp_root_dir, NULL, 0, tx); /* create the root objset */ VERIFY0(dsl_dataset_hold_obj(dp, obj, FTAG, &ds)); #ifdef _KERNEL { objset_t *os; rrw_enter(&ds->ds_bp_rwlock, RW_READER, FTAG); os = dmu_objset_create_impl(dp->dp_spa, ds, dsl_dataset_get_blkptr(ds), DMU_OST_ZFS, tx); rrw_exit(&ds->ds_bp_rwlock, FTAG); zfs_create_fs(os, kcred, zplprops, tx); } #endif dsl_dataset_rele(ds, FTAG); dmu_tx_commit(tx); rrw_exit(&dp->dp_config_rwlock, FTAG); return (dp); } /* * Account for the meta-objset space in its placeholder dsl_dir. */ void dsl_pool_mos_diduse_space(dsl_pool_t *dp, int64_t used, int64_t comp, int64_t uncomp) { ASSERT3U(comp, ==, uncomp); /* it's all metadata */ mutex_enter(&dp->dp_lock); dp->dp_mos_used_delta += used; dp->dp_mos_compressed_delta += comp; dp->dp_mos_uncompressed_delta += uncomp; mutex_exit(&dp->dp_lock); } static void dsl_pool_sync_mos(dsl_pool_t *dp, dmu_tx_t *tx) { zio_t *zio = zio_root(dp->dp_spa, NULL, NULL, ZIO_FLAG_MUSTSUCCEED); dmu_objset_sync(dp->dp_meta_objset, zio, tx); VERIFY0(zio_wait(zio)); dprintf_bp(&dp->dp_meta_rootbp, "meta objset rootbp is %s", ""); spa_set_rootblkptr(dp->dp_spa, &dp->dp_meta_rootbp); } static void dsl_pool_dirty_delta(dsl_pool_t *dp, int64_t delta) { ASSERT(MUTEX_HELD(&dp->dp_lock)); if (delta < 0) ASSERT3U(-delta, <=, dp->dp_dirty_total); dp->dp_dirty_total += delta; /* * Note: we signal even when increasing dp_dirty_total. * This ensures forward progress -- each thread wakes the next waiter. */ if (dp->dp_dirty_total < zfs_dirty_data_max) cv_signal(&dp->dp_spaceavail_cv); } void dsl_pool_sync(dsl_pool_t *dp, uint64_t txg) { zio_t *zio; dmu_tx_t *tx; dsl_dir_t *dd; dsl_dataset_t *ds; objset_t *mos = dp->dp_meta_objset; list_t synced_datasets; list_create(&synced_datasets, sizeof (dsl_dataset_t), offsetof(dsl_dataset_t, ds_synced_link)); tx = dmu_tx_create_assigned(dp, txg); /* * Write out all dirty blocks of dirty datasets. */ zio = zio_root(dp->dp_spa, NULL, NULL, ZIO_FLAG_MUSTSUCCEED); while ((ds = txg_list_remove(&dp->dp_dirty_datasets, txg)) != NULL) { /* * We must not sync any non-MOS datasets twice, because * we may have taken a snapshot of them. However, we * may sync newly-created datasets on pass 2. */ ASSERT(!list_link_active(&ds->ds_synced_link)); list_insert_tail(&synced_datasets, ds); dsl_dataset_sync(ds, zio, tx); } VERIFY0(zio_wait(zio)); /* * We have written all of the accounted dirty data, so our * dp_space_towrite should now be zero. However, some seldom-used * code paths do not adhere to this (e.g. dbuf_undirty(), also * rounding error in dbuf_write_physdone). * Shore up the accounting of any dirtied space now. */ dsl_pool_undirty_space(dp, dp->dp_dirty_pertxg[txg & TXG_MASK], txg); /* * Update the long range free counter after * we're done syncing user data */ mutex_enter(&dp->dp_lock); ASSERT(spa_sync_pass(dp->dp_spa) == 1 || dp->dp_long_free_dirty_pertxg[txg & TXG_MASK] == 0); dp->dp_long_free_dirty_pertxg[txg & TXG_MASK] = 0; mutex_exit(&dp->dp_lock); /* * After the data blocks have been written (ensured by the zio_wait() * above), update the user/group space accounting. This happens * in tasks dispatched to dp_sync_taskq, so wait for them before * continuing. */ for (ds = list_head(&synced_datasets); ds != NULL; ds = list_next(&synced_datasets, ds)) { dmu_objset_do_userquota_updates(ds->ds_objset, tx); } taskq_wait(dp->dp_sync_taskq); /* * Sync the datasets again to push out the changes due to * userspace updates. This must be done before we process the * sync tasks, so that any snapshots will have the correct * user accounting information (and we won't get confused * about which blocks are part of the snapshot). */ zio = zio_root(dp->dp_spa, NULL, NULL, ZIO_FLAG_MUSTSUCCEED); while ((ds = txg_list_remove(&dp->dp_dirty_datasets, txg)) != NULL) { ASSERT(list_link_active(&ds->ds_synced_link)); dmu_buf_rele(ds->ds_dbuf, ds); dsl_dataset_sync(ds, zio, tx); } VERIFY0(zio_wait(zio)); /* * Now that the datasets have been completely synced, we can * clean up our in-memory structures accumulated while syncing: * * - move dead blocks from the pending deadlist to the on-disk deadlist * - release hold from dsl_dataset_dirty() */ while ((ds = list_remove_head(&synced_datasets)) != NULL) { dsl_dataset_sync_done(ds, tx); } while ((dd = txg_list_remove(&dp->dp_dirty_dirs, txg)) != NULL) { dsl_dir_sync(dd, tx); } /* * The MOS's space is accounted for in the pool/$MOS * (dp_mos_dir). We can't modify the mos while we're syncing * it, so we remember the deltas and apply them here. */ if (dp->dp_mos_used_delta != 0 || dp->dp_mos_compressed_delta != 0 || dp->dp_mos_uncompressed_delta != 0) { dsl_dir_diduse_space(dp->dp_mos_dir, DD_USED_HEAD, dp->dp_mos_used_delta, dp->dp_mos_compressed_delta, dp->dp_mos_uncompressed_delta, tx); dp->dp_mos_used_delta = 0; dp->dp_mos_compressed_delta = 0; dp->dp_mos_uncompressed_delta = 0; } if (!multilist_is_empty(mos->os_dirty_dnodes[txg & TXG_MASK])) { dsl_pool_sync_mos(dp, tx); } /* * If we modify a dataset in the same txg that we want to destroy it, * its dsl_dir's dd_dbuf will be dirty, and thus have a hold on it. * dsl_dir_destroy_check() will fail if there are unexpected holds. * Therefore, we want to sync the MOS (thus syncing the dd_dbuf * and clearing the hold on it) before we process the sync_tasks. * The MOS data dirtied by the sync_tasks will be synced on the next * pass. */ if (!txg_list_empty(&dp->dp_sync_tasks, txg)) { dsl_sync_task_t *dst; /* * No more sync tasks should have been added while we * were syncing. */ ASSERT3U(spa_sync_pass(dp->dp_spa), ==, 1); while ((dst = txg_list_remove(&dp->dp_sync_tasks, txg)) != NULL) dsl_sync_task_sync(dst, tx); } dmu_tx_commit(tx); DTRACE_PROBE2(dsl_pool_sync__done, dsl_pool_t *dp, dp, uint64_t, txg); } void dsl_pool_sync_done(dsl_pool_t *dp, uint64_t txg) { zilog_t *zilog; while (zilog = txg_list_head(&dp->dp_dirty_zilogs, txg)) { dsl_dataset_t *ds = dmu_objset_ds(zilog->zl_os); /* * We don't remove the zilog from the dp_dirty_zilogs * list until after we've cleaned it. This ensures that * callers of zilog_is_dirty() receive an accurate * answer when they are racing with the spa sync thread. */ zil_clean(zilog, txg); (void) txg_list_remove_this(&dp->dp_dirty_zilogs, zilog, txg); ASSERT(!dmu_objset_is_dirty(zilog->zl_os, txg)); dmu_buf_rele(ds->ds_dbuf, zilog); } ASSERT(!dmu_objset_is_dirty(dp->dp_meta_objset, txg)); } /* * TRUE if the current thread is the tx_sync_thread or if we * are being called from SPA context during pool initialization. */ int dsl_pool_sync_context(dsl_pool_t *dp) { return (curthread == dp->dp_tx.tx_sync_thread || spa_is_initializing(dp->dp_spa) || taskq_member(dp->dp_sync_taskq, curthread)); } uint64_t dsl_pool_adjustedsize(dsl_pool_t *dp, boolean_t netfree) { uint64_t space, resv; /* * If we're trying to assess whether it's OK to do a free, * cut the reservation in half to allow forward progress * (e.g. make it possible to rm(1) files from a full pool). */ space = spa_get_dspace(dp->dp_spa); resv = spa_get_slop_space(dp->dp_spa); if (netfree) resv >>= 1; return (space - resv); } boolean_t dsl_pool_need_dirty_delay(dsl_pool_t *dp) { uint64_t delay_min_bytes = zfs_dirty_data_max * zfs_delay_min_dirty_percent / 100; boolean_t rv; mutex_enter(&dp->dp_lock); if (dp->dp_dirty_total > zfs_dirty_data_sync) txg_kick(dp); rv = (dp->dp_dirty_total > delay_min_bytes); mutex_exit(&dp->dp_lock); return (rv); } void dsl_pool_dirty_space(dsl_pool_t *dp, int64_t space, dmu_tx_t *tx) { if (space > 0) { mutex_enter(&dp->dp_lock); dp->dp_dirty_pertxg[tx->tx_txg & TXG_MASK] += space; dsl_pool_dirty_delta(dp, space); mutex_exit(&dp->dp_lock); } } void dsl_pool_undirty_space(dsl_pool_t *dp, int64_t space, uint64_t txg) { ASSERT3S(space, >=, 0); if (space == 0) return; mutex_enter(&dp->dp_lock); if (dp->dp_dirty_pertxg[txg & TXG_MASK] < space) { /* XXX writing something we didn't dirty? */ space = dp->dp_dirty_pertxg[txg & TXG_MASK]; } ASSERT3U(dp->dp_dirty_pertxg[txg & TXG_MASK], >=, space); dp->dp_dirty_pertxg[txg & TXG_MASK] -= space; ASSERT3U(dp->dp_dirty_total, >=, space); dsl_pool_dirty_delta(dp, -space); mutex_exit(&dp->dp_lock); } /* ARGSUSED */ static int upgrade_clones_cb(dsl_pool_t *dp, dsl_dataset_t *hds, void *arg) { dmu_tx_t *tx = arg; dsl_dataset_t *ds, *prev = NULL; int err; err = dsl_dataset_hold_obj(dp, hds->ds_object, FTAG, &ds); if (err) return (err); while (dsl_dataset_phys(ds)->ds_prev_snap_obj != 0) { err = dsl_dataset_hold_obj(dp, dsl_dataset_phys(ds)->ds_prev_snap_obj, FTAG, &prev); if (err) { dsl_dataset_rele(ds, FTAG); return (err); } if (dsl_dataset_phys(prev)->ds_next_snap_obj != ds->ds_object) break; dsl_dataset_rele(ds, FTAG); ds = prev; prev = NULL; } if (prev == NULL) { prev = dp->dp_origin_snap; /* * The $ORIGIN can't have any data, or the accounting * will be wrong. */ rrw_enter(&ds->ds_bp_rwlock, RW_READER, FTAG); ASSERT0(dsl_dataset_phys(prev)->ds_bp.blk_birth); rrw_exit(&ds->ds_bp_rwlock, FTAG); /* The origin doesn't get attached to itself */ if (ds->ds_object == prev->ds_object) { dsl_dataset_rele(ds, FTAG); return (0); } dmu_buf_will_dirty(ds->ds_dbuf, tx); dsl_dataset_phys(ds)->ds_prev_snap_obj = prev->ds_object; dsl_dataset_phys(ds)->ds_prev_snap_txg = dsl_dataset_phys(prev)->ds_creation_txg; dmu_buf_will_dirty(ds->ds_dir->dd_dbuf, tx); dsl_dir_phys(ds->ds_dir)->dd_origin_obj = prev->ds_object; dmu_buf_will_dirty(prev->ds_dbuf, tx); dsl_dataset_phys(prev)->ds_num_children++; if (dsl_dataset_phys(ds)->ds_next_snap_obj == 0) { ASSERT(ds->ds_prev == NULL); VERIFY0(dsl_dataset_hold_obj(dp, dsl_dataset_phys(ds)->ds_prev_snap_obj, ds, &ds->ds_prev)); } } ASSERT3U(dsl_dir_phys(ds->ds_dir)->dd_origin_obj, ==, prev->ds_object); ASSERT3U(dsl_dataset_phys(ds)->ds_prev_snap_obj, ==, prev->ds_object); if (dsl_dataset_phys(prev)->ds_next_clones_obj == 0) { dmu_buf_will_dirty(prev->ds_dbuf, tx); dsl_dataset_phys(prev)->ds_next_clones_obj = zap_create(dp->dp_meta_objset, DMU_OT_NEXT_CLONES, DMU_OT_NONE, 0, tx); } VERIFY0(zap_add_int(dp->dp_meta_objset, dsl_dataset_phys(prev)->ds_next_clones_obj, ds->ds_object, tx)); dsl_dataset_rele(ds, FTAG); if (prev != dp->dp_origin_snap) dsl_dataset_rele(prev, FTAG); return (0); } void dsl_pool_upgrade_clones(dsl_pool_t *dp, dmu_tx_t *tx) { ASSERT(dmu_tx_is_syncing(tx)); ASSERT(dp->dp_origin_snap != NULL); VERIFY0(dmu_objset_find_dp(dp, dp->dp_root_dir_obj, upgrade_clones_cb, tx, DS_FIND_CHILDREN | DS_FIND_SERIALIZE)); } /* ARGSUSED */ static int upgrade_dir_clones_cb(dsl_pool_t *dp, dsl_dataset_t *ds, void *arg) { dmu_tx_t *tx = arg; objset_t *mos = dp->dp_meta_objset; if (dsl_dir_phys(ds->ds_dir)->dd_origin_obj != 0) { dsl_dataset_t *origin; VERIFY0(dsl_dataset_hold_obj(dp, dsl_dir_phys(ds->ds_dir)->dd_origin_obj, FTAG, &origin)); if (dsl_dir_phys(origin->ds_dir)->dd_clones == 0) { dmu_buf_will_dirty(origin->ds_dir->dd_dbuf, tx); dsl_dir_phys(origin->ds_dir)->dd_clones = zap_create(mos, DMU_OT_DSL_CLONES, DMU_OT_NONE, 0, tx); } VERIFY0(zap_add_int(dp->dp_meta_objset, dsl_dir_phys(origin->ds_dir)->dd_clones, ds->ds_object, tx)); dsl_dataset_rele(origin, FTAG); } return (0); } void dsl_pool_upgrade_dir_clones(dsl_pool_t *dp, dmu_tx_t *tx) { ASSERT(dmu_tx_is_syncing(tx)); uint64_t obj; (void) dsl_dir_create_sync(dp, dp->dp_root_dir, FREE_DIR_NAME, tx); VERIFY0(dsl_pool_open_special_dir(dp, FREE_DIR_NAME, &dp->dp_free_dir)); /* * We can't use bpobj_alloc(), because spa_version() still * returns the old version, and we need a new-version bpobj with * subobj support. So call dmu_object_alloc() directly. */ obj = dmu_object_alloc(dp->dp_meta_objset, DMU_OT_BPOBJ, SPA_OLD_MAXBLOCKSIZE, DMU_OT_BPOBJ_HDR, sizeof (bpobj_phys_t), tx); VERIFY0(zap_add(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_FREE_BPOBJ, sizeof (uint64_t), 1, &obj, tx)); VERIFY0(bpobj_open(&dp->dp_free_bpobj, dp->dp_meta_objset, obj)); VERIFY0(dmu_objset_find_dp(dp, dp->dp_root_dir_obj, upgrade_dir_clones_cb, tx, DS_FIND_CHILDREN | DS_FIND_SERIALIZE)); } void dsl_pool_create_origin(dsl_pool_t *dp, dmu_tx_t *tx) { uint64_t dsobj; dsl_dataset_t *ds; ASSERT(dmu_tx_is_syncing(tx)); ASSERT(dp->dp_origin_snap == NULL); ASSERT(rrw_held(&dp->dp_config_rwlock, RW_WRITER)); /* create the origin dir, ds, & snap-ds */ dsobj = dsl_dataset_create_sync(dp->dp_root_dir, ORIGIN_DIR_NAME, NULL, 0, kcred, tx); VERIFY0(dsl_dataset_hold_obj(dp, dsobj, FTAG, &ds)); dsl_dataset_snapshot_sync_impl(ds, ORIGIN_DIR_NAME, tx); VERIFY0(dsl_dataset_hold_obj(dp, dsl_dataset_phys(ds)->ds_prev_snap_obj, dp, &dp->dp_origin_snap)); dsl_dataset_rele(ds, FTAG); } taskq_t * dsl_pool_vnrele_taskq(dsl_pool_t *dp) { return (dp->dp_vnrele_taskq); } /* * Walk through the pool-wide zap object of temporary snapshot user holds * and release them. */ void dsl_pool_clean_tmp_userrefs(dsl_pool_t *dp) { zap_attribute_t za; zap_cursor_t zc; objset_t *mos = dp->dp_meta_objset; uint64_t zapobj = dp->dp_tmp_userrefs_obj; nvlist_t *holds; if (zapobj == 0) return; ASSERT(spa_version(dp->dp_spa) >= SPA_VERSION_USERREFS); holds = fnvlist_alloc(); for (zap_cursor_init(&zc, mos, zapobj); zap_cursor_retrieve(&zc, &za) == 0; zap_cursor_advance(&zc)) { char *htag; nvlist_t *tags; htag = strchr(za.za_name, '-'); *htag = '\0'; ++htag; if (nvlist_lookup_nvlist(holds, za.za_name, &tags) != 0) { tags = fnvlist_alloc(); fnvlist_add_boolean(tags, htag); fnvlist_add_nvlist(holds, za.za_name, tags); fnvlist_free(tags); } else { fnvlist_add_boolean(tags, htag); } } dsl_dataset_user_release_tmp(dp, holds); fnvlist_free(holds); zap_cursor_fini(&zc); } /* * Create the pool-wide zap object for storing temporary snapshot holds. */ void dsl_pool_user_hold_create_obj(dsl_pool_t *dp, dmu_tx_t *tx) { objset_t *mos = dp->dp_meta_objset; ASSERT(dp->dp_tmp_userrefs_obj == 0); ASSERT(dmu_tx_is_syncing(tx)); dp->dp_tmp_userrefs_obj = zap_create_link(mos, DMU_OT_USERREFS, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_TMP_USERREFS, tx); } static int dsl_pool_user_hold_rele_impl(dsl_pool_t *dp, uint64_t dsobj, const char *tag, uint64_t now, dmu_tx_t *tx, boolean_t holding) { objset_t *mos = dp->dp_meta_objset; uint64_t zapobj = dp->dp_tmp_userrefs_obj; char *name; int error; ASSERT(spa_version(dp->dp_spa) >= SPA_VERSION_USERREFS); ASSERT(dmu_tx_is_syncing(tx)); /* * If the pool was created prior to SPA_VERSION_USERREFS, the * zap object for temporary holds might not exist yet. */ if (zapobj == 0) { if (holding) { dsl_pool_user_hold_create_obj(dp, tx); zapobj = dp->dp_tmp_userrefs_obj; } else { return (SET_ERROR(ENOENT)); } } name = kmem_asprintf("%llx-%s", (u_longlong_t)dsobj, tag); if (holding) error = zap_add(mos, zapobj, name, 8, 1, &now, tx); else error = zap_remove(mos, zapobj, name, tx); strfree(name); return (error); } /* * Add a temporary hold for the given dataset object and tag. */ int dsl_pool_user_hold(dsl_pool_t *dp, uint64_t dsobj, const char *tag, uint64_t now, dmu_tx_t *tx) { return (dsl_pool_user_hold_rele_impl(dp, dsobj, tag, now, tx, B_TRUE)); } /* * Release a temporary hold for the given dataset object and tag. */ int dsl_pool_user_release(dsl_pool_t *dp, uint64_t dsobj, const char *tag, dmu_tx_t *tx) { return (dsl_pool_user_hold_rele_impl(dp, dsobj, tag, NULL, tx, B_FALSE)); } /* * DSL Pool Configuration Lock * * The dp_config_rwlock protects against changes to DSL state (e.g. dataset * creation / destruction / rename / property setting). It must be held for * read to hold a dataset or dsl_dir. I.e. you must call * dsl_pool_config_enter() or dsl_pool_hold() before calling * dsl_{dataset,dir}_hold{_obj}. In most circumstances, the dp_config_rwlock * must be held continuously until all datasets and dsl_dirs are released. * * The only exception to this rule is that if a "long hold" is placed on * a dataset, then the dp_config_rwlock may be dropped while the dataset * is still held. The long hold will prevent the dataset from being * destroyed -- the destroy will fail with EBUSY. A long hold can be * obtained by calling dsl_dataset_long_hold(), or by "owning" a dataset * (by calling dsl_{dataset,objset}_{try}own{_obj}). * * Legitimate long-holders (including owners) should be long-running, cancelable * tasks that should cause "zfs destroy" to fail. This includes DMU * consumers (i.e. a ZPL filesystem being mounted or ZVOL being open), * "zfs send", and "zfs diff". There are several other long-holders whose * uses are suboptimal (e.g. "zfs promote", and zil_suspend()). * * The usual formula for long-holding would be: * dsl_pool_hold() * dsl_dataset_hold() * ... perform checks ... * dsl_dataset_long_hold() * dsl_pool_rele() * ... perform long-running task ... * dsl_dataset_long_rele() * dsl_dataset_rele() * * Note that when the long hold is released, the dataset is still held but * the pool is not held. The dataset may change arbitrarily during this time * (e.g. it could be destroyed). Therefore you shouldn't do anything to the * dataset except release it. * * User-initiated operations (e.g. ioctls, zfs_ioc_*()) are either read-only * or modifying operations. * * Modifying operations should generally use dsl_sync_task(). The synctask * infrastructure enforces proper locking strategy with respect to the * dp_config_rwlock. See the comment above dsl_sync_task() for details. * * Read-only operations will manually hold the pool, then the dataset, obtain * information from the dataset, then release the pool and dataset. * dmu_objset_{hold,rele}() are convenience routines that also do the pool * hold/rele. */ int dsl_pool_hold(const char *name, void *tag, dsl_pool_t **dp) { spa_t *spa; int error; error = spa_open(name, &spa, tag); if (error == 0) { *dp = spa_get_dsl(spa); dsl_pool_config_enter(*dp, tag); } return (error); } void dsl_pool_rele(dsl_pool_t *dp, void *tag) { dsl_pool_config_exit(dp, tag); spa_close(dp->dp_spa, tag); } void dsl_pool_config_enter(dsl_pool_t *dp, void *tag) { /* * We use a "reentrant" reader-writer lock, but not reentrantly. * * The rrwlock can (with the track_all flag) track all reading threads, * which is very useful for debugging which code path failed to release * the lock, and for verifying that the *current* thread does hold * the lock. * * (Unlike a rwlock, which knows that N threads hold it for * read, but not *which* threads, so rw_held(RW_READER) returns TRUE * if any thread holds it for read, even if this thread doesn't). */ ASSERT(!rrw_held(&dp->dp_config_rwlock, RW_READER)); rrw_enter(&dp->dp_config_rwlock, RW_READER, tag); } void dsl_pool_config_enter_prio(dsl_pool_t *dp, void *tag) { ASSERT(!rrw_held(&dp->dp_config_rwlock, RW_READER)); rrw_enter_read_prio(&dp->dp_config_rwlock, tag); } void dsl_pool_config_exit(dsl_pool_t *dp, void *tag) { rrw_exit(&dp->dp_config_rwlock, tag); } boolean_t dsl_pool_config_held(dsl_pool_t *dp) { return (RRW_LOCK_HELD(&dp->dp_config_rwlock)); } boolean_t dsl_pool_config_held_writer(dsl_pool_t *dp) { return (RRW_WRITE_HELD(&dp->dp_config_rwlock)); }