/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #include #include /* * The maximum number of bytes to return from SMB Core * SmbRead or SmbLockAndRead. */ #define SMB_CORE_READ_MAX 4432 /* * The limit in bytes for SmbReadX. */ #define SMB_READX_MAX 0x10000 int smb_common_read(smb_request_t *, smb_rw_param_t *); /* * Read bytes from a file or named pipe (SMB Core). * * The requested count specifies the number of bytes desired. Offset * is limited to 32 bits, so this client request is inappropriate for * files with 64 bit offsets. * * On return, count is the number of bytes actually being returned, which * may be less than the count requested only if a read specifies bytes * beyond the current file size. In this case only the bytes that exist * are returned. A read completely beyond the end of file results in a * response of length zero. This is the only circumstance when a zero * length response is generated. A count returned which is less than the * count requested is the end of file indicator. */ smb_sdrc_t smb_pre_read(smb_request_t *sr) { smb_rw_param_t *param; uint32_t off_low; uint16_t count; uint16_t remcnt; int rc; param = kmem_zalloc(sizeof (smb_rw_param_t), KM_SLEEP); sr->arg.rw = param; rc = smbsr_decode_vwv(sr, "wwlw", &sr->smb_fid, &count, &off_low, &remcnt); param->rw_offset = (uint64_t)off_low; param->rw_count = (uint32_t)count; param->rw_mincnt = 0; DTRACE_SMB_2(op__Read__start, smb_request_t *, sr, smb_rw_param_t *, param); return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR); } void smb_post_read(smb_request_t *sr) { DTRACE_SMB_2(op__Read__done, smb_request_t *, sr, smb_rw_param_t *, sr->arg.rw); kmem_free(sr->arg.rw, sizeof (smb_rw_param_t)); } smb_sdrc_t smb_com_read(smb_request_t *sr) { smb_rw_param_t *param = sr->arg.rw; uint16_t count; int rc; smbsr_lookup_file(sr); if (sr->fid_ofile == NULL) { smbsr_error(sr, NT_STATUS_INVALID_HANDLE, ERRDOS, ERRbadfid); return (SDRC_ERROR); } sr->user_cr = smb_ofile_getcred(sr->fid_ofile); if (param->rw_count > SMB_CORE_READ_MAX) param->rw_count = SMB_CORE_READ_MAX; if ((rc = smb_common_read(sr, param)) != 0) { smbsr_errno(sr, rc); return (SDRC_ERROR); } count = (uint16_t)param->rw_count; rc = smbsr_encode_result(sr, 5, VAR_BCC, "bw8.wbwC", 5, count, VAR_BCC, 0x01, count, &sr->raw_data); return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR); } /* * Lock and read bytes from a file (SMB Core Plus). The SmbLockAndRead/ * SmbLockAndWrite sub-dialect is only valid on disk files: reject any * attempt to use it on non-disk shares. * * The requested count specifies the number of bytes desired. Offset * specifies the offset in the file of the first byte to be locked then * read. Note that offset is limited to 32 bits, so this client request * is inappropriate for files with 64 bit offsets. * * As with SMB_LOCK_BYTE_RANGE request, if the lock cannot be granted * immediately an error should be returned to the client. If an error * occurs on the lock, the bytes should not be read. * * On return, count is the number of bytes actually being returned, which * may be less than the count requested only if a read specifies bytes * beyond the current file size. In this case only the bytes that exist * are returned. A read completely beyond the end of file results in a * response of length zero. This is the only circumstance when a zero * length response is generated. A count returned which is less than the * count requested is the end of file indicator. */ smb_sdrc_t smb_pre_lock_and_read(smb_request_t *sr) { smb_rw_param_t *param; uint32_t off_low; uint16_t count; uint16_t remcnt; int rc; param = kmem_zalloc(sizeof (smb_rw_param_t), KM_SLEEP); sr->arg.rw = param; rc = smbsr_decode_vwv(sr, "wwlw", &sr->smb_fid, &count, &off_low, &remcnt); param->rw_offset = (uint64_t)off_low; param->rw_count = (uint32_t)count; param->rw_mincnt = 0; DTRACE_SMB_2(op__LockAndRead__start, smb_request_t *, sr, smb_rw_param_t *, param); return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR); } void smb_post_lock_and_read(smb_request_t *sr) { DTRACE_SMB_2(op__LockAndRead__done, smb_request_t *, sr, smb_rw_param_t *, sr->arg.rw); kmem_free(sr->arg.rw, sizeof (smb_rw_param_t)); } smb_sdrc_t smb_com_lock_and_read(smb_request_t *sr) { smb_rw_param_t *param = sr->arg.rw; DWORD status; uint16_t count; int rc; if (STYPE_ISDSK(sr->tid_tree->t_res_type) == 0) { smbsr_error(sr, NT_STATUS_ACCESS_DENIED, ERRDOS, ERRnoaccess); return (SDRC_ERROR); } smbsr_lookup_file(sr); if (sr->fid_ofile == NULL) { smbsr_error(sr, NT_STATUS_INVALID_HANDLE, ERRDOS, ERRbadfid); return (SDRC_ERROR); } sr->user_cr = smb_ofile_getcred(sr->fid_ofile); status = smb_lock_range(sr, param->rw_offset, (uint64_t)param->rw_count, 0, SMB_LOCK_TYPE_READWRITE); if (status != NT_STATUS_SUCCESS) { smb_lock_range_error(sr, status); return (SDRC_ERROR); } if (param->rw_count > SMB_CORE_READ_MAX) param->rw_count = SMB_CORE_READ_MAX; if ((rc = smb_common_read(sr, param)) != 0) { smbsr_errno(sr, rc); return (SDRC_ERROR); } count = (uint16_t)param->rw_count; rc = smbsr_encode_result(sr, 5, VAR_BCC, "bw8.wbwC", 5, count, VAR_BCC, 0x1, count, &sr->raw_data); return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR); } /* * The SMB_COM_READ_RAW protocol is a negotiated option introduced in * SMB Core Plus to maximize performance when reading a large block * of data from a server. This request was extended in LM 0.12 to * support 64-bit offsets; the server can indicate support by setting * CAP_LARGE_FILES in the negotiated capabilities. * * The client must guarantee that there is (and will be) no other request * to the server for the duration of the SMB_COM_READ_RAW, since the * server response has no header or trailer. To help ensure that there * are no interruptions, we block all I/O for the session during read raw. * * If this is the first SMB request received since we sent an oplock break * to this client, we don't know if it's safe to send the raw data because * the requests may have crossed on the wire and the client may have * interpreted the oplock break as part of the raw data. To avoid problems, * we send a zero length session packet, which will force the client to * retry the read. * * Do not return errors from SmbReadRaw. * Read errors are handled by sending a zero length response. */ smb_sdrc_t smb_pre_read_raw(smb_request_t *sr) { smb_rw_param_t *param; uint32_t off_low; uint32_t off_high; uint32_t timeout; uint16_t count; int rc; param = kmem_zalloc(sizeof (smb_rw_param_t), KM_SLEEP); sr->arg.rw = param; if (sr->smb_wct == 8) { rc = smbsr_decode_vwv(sr, "wlwwl2.", &sr->smb_fid, &off_low, &count, ¶m->rw_mincnt, &timeout); if (rc == 0) { param->rw_offset = (uint64_t)off_low; param->rw_count = (uint32_t)count; } } else { rc = smbsr_decode_vwv(sr, "wlwwl2.l", &sr->smb_fid, &off_low, &count, ¶m->rw_mincnt, &timeout, &off_high); if (rc == 0) { param->rw_offset = ((uint64_t)off_high << 32) | off_low; param->rw_count = (uint32_t)count; } } DTRACE_SMB_2(op__ReadRaw__start, smb_request_t *, sr, smb_rw_param_t *, param); return (SDRC_SUCCESS); } void smb_post_read_raw(smb_request_t *sr) { mbuf_chain_t *mbc; if (sr->session->s_state == SMB_SESSION_STATE_READ_RAW_ACTIVE) { sr->session->s_state = SMB_SESSION_STATE_NEGOTIATED; while ((mbc = list_head(&sr->session->s_oplock_brkreqs)) != NULL) { SMB_MBC_VALID(mbc); list_remove(&sr->session->s_oplock_brkreqs, mbc); (void) smb_session_send(sr->session, 0, mbc); smb_mbc_free(mbc); } } DTRACE_SMB_2(op__ReadRaw__done, smb_request_t *, sr, smb_rw_param_t *, sr->arg.rw); kmem_free(sr->arg.rw, sizeof (smb_rw_param_t)); } smb_sdrc_t smb_com_read_raw(smb_request_t *sr) { smb_rw_param_t *param = sr->arg.rw; switch (sr->session->s_state) { case SMB_SESSION_STATE_NEGOTIATED: sr->session->s_state = SMB_SESSION_STATE_READ_RAW_ACTIVE; break; case SMB_SESSION_STATE_OPLOCK_BREAKING: (void) smb_session_send(sr->session, 0, NULL); return (SDRC_NO_REPLY); case SMB_SESSION_STATE_TERMINATED: case SMB_SESSION_STATE_DISCONNECTED: return (SDRC_NO_REPLY); case SMB_SESSION_STATE_READ_RAW_ACTIVE: sr->session->s_state = SMB_SESSION_STATE_NEGOTIATED; return (SDRC_DROP_VC); case SMB_SESSION_STATE_WRITE_RAW_ACTIVE: case SMB_SESSION_STATE_CONNECTED: case SMB_SESSION_STATE_ESTABLISHED: default: return (SDRC_DROP_VC); } smbsr_lookup_file(sr); if (sr->fid_ofile == NULL) { (void) smb_session_send(sr->session, 0, NULL); return (SDRC_NO_REPLY); } sr->user_cr = smb_ofile_getcred(sr->fid_ofile); if (param->rw_mincnt > param->rw_count) param->rw_mincnt = 0; if (smb_common_read(sr, param) != 0) { (void) smb_session_send(sr->session, 0, NULL); m_freem(sr->raw_data.chain); sr->raw_data.chain = NULL; } else { (void) smb_session_send(sr->session, 0, &sr->raw_data); } return (SDRC_NO_REPLY); } /* * Read bytes from a file (SMB Core). This request was extended in * LM 0.12 to support 64-bit offsets, indicated by sending a wct of * 12 and including additional offset information. * * MS-SMB 3.3.5.7 update to LM 0.12 4.2.4: * If wct is 12 and CAP_LARGE_READX is set, the count may be larger * than the negotiated buffer size. If maxcnt_high is 0xFF, it must * be ignored. Otherwise, maxcnt_high represents the upper 16 bits * of rw_count. */ smb_sdrc_t smb_pre_read_andx(smb_request_t *sr) { smb_rw_param_t *param; uint32_t off_low; uint32_t off_high; uint32_t maxcnt_high; uint16_t maxcnt_low; uint16_t mincnt; uint16_t remcnt; int rc; param = kmem_zalloc(sizeof (smb_rw_param_t), KM_SLEEP); sr->arg.rw = param; if (sr->smb_wct == 12) { rc = smbsr_decode_vwv(sr, "b3.wlwwlwl", ¶m->rw_andx, &sr->smb_fid, &off_low, &maxcnt_low, &mincnt, &maxcnt_high, &remcnt, &off_high); param->rw_offset = ((uint64_t)off_high << 32) | (uint64_t)off_low; param->rw_count = (uint32_t)maxcnt_low; if ((sr->session->capabilities & CAP_LARGE_READX) && (maxcnt_high < 0xFF)) param->rw_count |= maxcnt_high << 16; } else { rc = smbsr_decode_vwv(sr, "b3.wlwwlw", ¶m->rw_andx, &sr->smb_fid, &off_low, &maxcnt_low, &mincnt, &maxcnt_high, &remcnt); param->rw_offset = (uint64_t)off_low; param->rw_count = (uint32_t)maxcnt_low; } param->rw_mincnt = 0; DTRACE_SMB_2(op__ReadX__start, smb_request_t *, sr, smb_rw_param_t *, param); return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR); } void smb_post_read_andx(smb_request_t *sr) { DTRACE_SMB_2(op__ReadX__done, smb_request_t *, sr, smb_rw_param_t *, sr->arg.rw); kmem_free(sr->arg.rw, sizeof (smb_rw_param_t)); } smb_sdrc_t smb_com_read_andx(smb_request_t *sr) { smb_rw_param_t *param = sr->arg.rw; uint16_t datalen_high; uint16_t datalen_low; uint16_t data_offset; uint16_t offset2; int rc; smbsr_lookup_file(sr); if (sr->fid_ofile == NULL) { smbsr_error(sr, NT_STATUS_INVALID_HANDLE, ERRDOS, ERRbadfid); return (SDRC_ERROR); } sr->user_cr = smb_ofile_getcred(sr->fid_ofile); if (param->rw_count >= SMB_READX_MAX) param->rw_count = 0; if ((rc = smb_common_read(sr, param)) != 0) { smbsr_errno(sr, rc); return (SDRC_ERROR); } datalen_low = param->rw_count & 0xFFFF; datalen_high = (param->rw_count >> 16) & 0xFF; /* * If this is a secondary command, the data offset * includes the previous wct + sizeof(wct). */ data_offset = (sr->andx_prev_wct == 0) ? 0 : sr->andx_prev_wct + 1; if (STYPE_ISIPC(sr->tid_tree->t_res_type)) { data_offset += 60; offset2 = (param->rw_andx == 0xFF) ? 0 : param->rw_count + 60; rc = smbsr_encode_result(sr, 12, VAR_BCC, "bb1.ww4.www8.wbC", 12, /* wct */ param->rw_andx, /* secondary andx command */ offset2, /* offset to next command */ 0, /* set to 0 for named pipes */ datalen_low, /* data byte count */ data_offset, /* offset from start to data */ datalen_high, /* data byte count */ VAR_BCC, /* BCC marker */ 0x00, /* padding */ &sr->raw_data); } else { data_offset += 59; offset2 = (param->rw_andx == 0xFF) ? 0 : param->rw_count + 59; rc = smbsr_encode_result(sr, 12, VAR_BCC, "bb1.ww4.www8.wC", 12, /* wct */ param->rw_andx, /* secondary andx command */ offset2, /* offset to next command */ -1, /* must be -1 for regular files */ datalen_low, /* data byte count */ data_offset, /* offset from start to data */ datalen_high, /* data byte count */ VAR_BCC, /* BCC marker */ &sr->raw_data); } return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR); } /* * Common function for reading files or IPC/MSRPC named pipes. All * protocol read functions should lookup the fid before calling this * function. We can't move the fid lookup here because lock-and-read * requires the fid to do locking before attempting the read. * * Returns errno values. */ int smb_common_read(smb_request_t *sr, smb_rw_param_t *param) { smb_ofile_t *ofile = sr->fid_ofile; smb_node_t *node; smb_vdb_t *vdb = ¶m->rw_vdb; struct mbuf *top; int rc; vdb->vdb_tag = 0; vdb->vdb_uio.uio_iov = &vdb->vdb_iovec[0]; vdb->vdb_uio.uio_iovcnt = MAX_IOVEC; vdb->vdb_uio.uio_resid = param->rw_count; vdb->vdb_uio.uio_loffset = (offset_t)param->rw_offset; vdb->vdb_uio.uio_segflg = UIO_SYSSPACE; switch (sr->tid_tree->t_res_type & STYPE_MASK) { case STYPE_DISKTREE: node = ofile->f_node; if (node->attr.sa_vattr.va_type != VDIR) { rc = smb_lock_range_access(sr, node, param->rw_offset, param->rw_count, B_FALSE); if (rc != NT_STATUS_SUCCESS) { rc = ERANGE; break; } } if ((ofile->f_flags & SMB_OFLAGS_EXECONLY) && !(sr->smb_flg2 & SMB_FLAGS2_PAGING_IO)) { /* * SMB_FLAGS2_PAGING_IO: permit execute-only reads. * * Reject request if the file has been opened * execute-only and SMB_FLAGS2_PAGING_IO is not set. */ rc = EACCES; break; } (void) smb_sync_fsattr(sr, sr->user_cr, node); sr->raw_data.max_bytes = vdb->vdb_uio.uio_resid; top = smb_mbuf_allocate(&vdb->vdb_uio); rc = smb_fsop_read(sr, sr->user_cr, node, &vdb->vdb_uio, &node->attr); sr->raw_data.max_bytes -= vdb->vdb_uio.uio_resid; smb_mbuf_trim(top, sr->raw_data.max_bytes); MBC_ATTACH_MBUF(&sr->raw_data, top); break; case STYPE_IPC: rc = smb_opipe_read(sr, &vdb->vdb_uio); break; default: rc = EACCES; break; } param->rw_count -= vdb->vdb_uio.uio_resid; if (rc != 0) return (rc); if (param->rw_mincnt != 0 && param->rw_count < param->rw_mincnt) { /* * mincnt is only used by read-raw and is typically * zero. If mincnt is greater than zero and the * number of bytes read is less than mincnt, tell * the client that we read nothing. */ param->rw_count = 0; } param->rw_offset += param->rw_count; mutex_enter(&sr->fid_ofile->f_mutex); ofile->f_seek_pos = param->rw_offset; mutex_exit(&sr->fid_ofile->f_mutex); return (rc); }