/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * SMB Locking library functions. * * You will notice that the functions in this file exit the lock of the session * and reenter it before returning. They even assume that the lock has been * entered in READER mode. The reason for that is a potential deadlock that may * occur when an oplock needs to be broken and the function * smb_session_break_oplock() is called. It should be noticed that the mutex of * the smb node, the oplock of which needs to be broken, is also exited before * calling smb_session_break_oplock(). The reason for that is the same: avoiding * a deadlock. That complexity is due to the fact that the lock of the session * is held during the treatment of a request. That complexity will go away when * that is not the case anymore. */ #include #include #include static void smb_oplock_wait(smb_node_t *); /* * Magic 0xFF 'S' 'M' 'B' * smb_com a byte, the "first" command * Error a 4-byte union, ignored in a request * smb_flg a one byte set of eight flags * smb_flg2 a two byte set of 16 flags * . twelve reserved bytes, have a role * in connectionless transports (IPX, UDP?) * smb_tid a 16-bit tree ID, a mount point sorta, * 0xFFFF is this command does not have * or require a tree context * smb_pid a 16-bit process ID * smb_uid a 16-bit user ID, specific to this "session" * and mapped to a system (bona-fide) UID * smb_mid a 16-bit multiplex ID, used to differentiate * multiple simultaneous requests from the same * process (pid) (ref RPC "xid") * * SMB_COM_LOCKING_ANDX allows both locking and/or unlocking of file range(s). * * Client Request Description * ================================== ================================= * * UCHAR WordCount; Count of parameter words = 8 * UCHAR AndXCommand; Secondary (X) command; 0xFF = none * UCHAR AndXReserved; Reserved (must be 0) * USHORT AndXOffset; Offset to next command WordCount * USHORT Fid; File handle * UCHAR LockType; See LockType table below * UCHAR OplockLevel; The new oplock level * ULONG Timeout; Milliseconds to wait for unlock * USHORT NumberOfUnlocks; Num. unlock range structs following * USHORT NumberOfLocks; Num. lock range structs following * USHORT ByteCount; Count of data bytes * LOCKING_ANDX_RANGE Unlocks[]; Unlock ranges * LOCKING_ANDX_RANGE Locks[]; Lock ranges * * LockType Flag Name Value Description * ============================ ===== ================================ * * LOCKING_ANDX_SHARED_LOCK 0x01 Read-only lock * LOCKING_ANDX_OPLOCK_RELEASE 0x02 Oplock break notification * LOCKING_ANDX_CHANGE_LOCKTYPE 0x04 Change lock type * LOCKING_ANDX_CANCEL_LOCK 0x08 Cancel outstanding request * LOCKING_ANDX_LARGE_FILES 0x10 Large file locking format * * LOCKING_ANDX_RANGE Format * ===================================================================== * * USHORT Pid; PID of process "owning" lock * ULONG Offset; Offset to bytes to [un]lock * ULONG Length; Number of bytes to [un]lock * * Large File LOCKING_ANDX_RANGE Format * ===================================================================== * * USHORT Pid; PID of process "owning" lock * USHORT Pad; Pad to DWORD align (mbz) * ULONG OffsetHigh; Offset to bytes to [un]lock * (high) * ULONG OffsetLow; Offset to bytes to [un]lock (low) * ULONG LengthHigh; Number of bytes to [un]lock * (high) * ULONG LengthLow; Number of bytes to [un]lock (low) * * Server Response Description * ================================== ================================= * * UCHAR WordCount; Count of parameter words = 2 * UCHAR AndXCommand; Secondary (X) command; 0xFF = * none * UCHAR AndXReserved; Reserved (must be 0) * USHORT AndXOffset; Offset to next command WordCount * USHORT ByteCount; Count of data bytes = 0 * */ /* * smb_oplock_acquire * * Attempt to acquire an oplock. Note that the oplock granted may be * none, i.e. the oplock was not granted. The result of the acquisition is * provided in ol->ol_level. * * Grant an oplock to the requestor if this session is the only one * that has the file open, regardless of the number of instances of * the file opened by this session. * * However, if there is no oplock on this file and there is already * at least one open, we will not grant an oplock, even if the only * existing opens are from the same client. This is "server discretion." * * An oplock may need to be broken in order for one to be granted, and * depending on what action is taken by the other client (unlock or close), * an oplock may or may not be granted. (The breaking of an oplock is * done earlier in the calling path.) */ void smb_oplock_acquire(smb_node_t *node, smb_ofile_t *of, open_param_t *op) { smb_session_t *session; smb_oplock_t *ol; clock_t time; SMB_NODE_VALID(node); SMB_OFILE_VALID(of); ASSERT(node == SMB_OFILE_GET_NODE(of)); session = SMB_OFILE_GET_SESSION(of); if (!smb_session_oplocks_enable(session) || smb_tree_has_feature(SMB_OFILE_GET_TREE(of), SMB_TREE_NO_OPLOCKS)) { op->op_oplock_level = SMB_OPLOCK_NONE; return; } ol = &node->n_oplock; time = MSEC_TO_TICK(smb_oplock_timeout) + ddi_get_lbolt(); mutex_enter(&node->n_mutex); switch (node->n_state) { case SMB_NODE_STATE_OPLOCK_GRANTED: if (SMB_SESSION_GET_ID(session) == ol->ol_sess_id) { mutex_exit(&node->n_mutex); return; } break; case SMB_NODE_STATE_AVAILABLE: case SMB_NODE_STATE_OPLOCK_BREAKING: break; default: SMB_PANIC(); } for (;;) { int rc; smb_oplock_wait(node); if (node->n_state == SMB_NODE_STATE_AVAILABLE) { if ((op->op_oplock_level == SMB_OPLOCK_LEVEL_II) || (op->op_oplock_level == SMB_OPLOCK_NONE) || (node->n_open_count > 1)) { mutex_exit(&node->n_mutex); op->op_oplock_level = SMB_OPLOCK_NONE; return; } ol->ol_ofile = of; ol->ol_sess_id = SMB_SESSION_GET_ID(session); ol->ol_level = op->op_oplock_level; ol->ol_xthread = curthread; node->n_state = SMB_NODE_STATE_OPLOCK_GRANTED; mutex_exit(&node->n_mutex); if (smb_fsop_oplock_install(node, of->f_mode) == 0) { smb_ofile_set_oplock_granted(of); return; } mutex_enter(&node->n_mutex); ASSERT(node->n_state == SMB_NODE_STATE_OPLOCK_GRANTED); node->n_state = SMB_NODE_STATE_AVAILABLE; ol->ol_xthread = NULL; op->op_oplock_level = SMB_OPLOCK_NONE; cv_broadcast(&ol->ol_cv); break; } if (node->n_state == SMB_NODE_STATE_OPLOCK_GRANTED) { if (SMB_SESSION_GET_ID(session) == ol->ol_sess_id) break; node->n_state = SMB_NODE_STATE_OPLOCK_BREAKING; mutex_exit(&node->n_mutex); smb_session_oplock_break( SMB_OFILE_GET_SESSION(ol->ol_ofile), ol->ol_ofile); mutex_enter(&node->n_mutex); continue; } ASSERT(node->n_state == SMB_NODE_STATE_OPLOCK_BREAKING); rc = cv_timedwait(&ol->ol_cv, &node->n_mutex, time); if (rc == -1) { /* * Oplock release timed out. */ if (node->n_state == SMB_NODE_STATE_OPLOCK_BREAKING) { node->n_state = SMB_NODE_STATE_AVAILABLE; ol->ol_xthread = curthread; mutex_exit(&node->n_mutex); smb_fsop_oplock_uninstall(node); mutex_enter(&node->n_mutex); ol->ol_xthread = NULL; cv_broadcast(&ol->ol_cv); } } } mutex_exit(&node->n_mutex); } /* * smb_oplock_break * * The oplock break may succeed for multiple reasons: file close, oplock * release, holder connection dropped, requesting client disconnect etc. * * Returns: * * B_TRUE The oplock is broken. * B_FALSE The oplock is being broken. This is returned if nowait is set * to B_TRUE; */ boolean_t smb_oplock_break(smb_node_t *node, smb_session_t *session, boolean_t nowait) { smb_oplock_t *ol; clock_t time; SMB_NODE_VALID(node); ol = &node->n_oplock; time = MSEC_TO_TICK(smb_oplock_timeout) + ddi_get_lbolt(); if (session != NULL) { mutex_enter(&node->n_mutex); if (SMB_SESSION_GET_ID(session) == ol->ol_sess_id) { mutex_exit(&node->n_mutex); return (B_TRUE); } } else { mutex_enter(&node->n_mutex); } for (;;) { int rc; smb_oplock_wait(node); if (node->n_state == SMB_NODE_STATE_AVAILABLE) { mutex_exit(&node->n_mutex); return (B_TRUE); } if (node->n_state == SMB_NODE_STATE_OPLOCK_GRANTED) { node->n_state = SMB_NODE_STATE_OPLOCK_BREAKING; mutex_exit(&node->n_mutex); smb_session_oplock_break( SMB_OFILE_GET_SESSION(ol->ol_ofile), ol->ol_ofile); mutex_enter(&node->n_mutex); continue; } ASSERT(node->n_state == SMB_NODE_STATE_OPLOCK_BREAKING); if (nowait) { mutex_exit(&node->n_mutex); return (B_FALSE); } rc = cv_timedwait(&ol->ol_cv, &node->n_mutex, time); if (rc == -1) { /* * Oplock release timed out. */ if (node->n_state == SMB_NODE_STATE_OPLOCK_BREAKING) { node->n_state = SMB_NODE_STATE_AVAILABLE; ol->ol_xthread = curthread; mutex_exit(&node->n_mutex); smb_fsop_oplock_uninstall(node); mutex_enter(&node->n_mutex); ol->ol_xthread = NULL; cv_broadcast(&ol->ol_cv); break; } } } mutex_exit(&node->n_mutex); return (B_TRUE); } /* * smb_oplock_release * * This function releases the oplock on the node passed in. If other threads * were waiting for the oplock to be released they are signaled. */ void smb_oplock_release(smb_node_t *node, smb_ofile_t *of) { smb_oplock_t *ol; SMB_NODE_VALID(node); ol = &node->n_oplock; mutex_enter(&node->n_mutex); smb_oplock_wait(node); switch (node->n_state) { case SMB_NODE_STATE_AVAILABLE: break; case SMB_NODE_STATE_OPLOCK_GRANTED: case SMB_NODE_STATE_OPLOCK_BREAKING: if (ol->ol_ofile == of) { node->n_state = SMB_NODE_STATE_AVAILABLE; ol->ol_xthread = curthread; mutex_exit(&node->n_mutex); smb_fsop_oplock_uninstall(node); mutex_enter(&node->n_mutex); ol->ol_xthread = NULL; cv_broadcast(&ol->ol_cv); } break; default: SMB_PANIC(); } mutex_exit(&node->n_mutex); } /* * smb_oplock_conflict * * The two checks on "session" and "op" are primarily for the open path. * Other SMB functions may call smb_oplock_conflict() with a session * pointer so as to do the session check. */ boolean_t smb_oplock_conflict(smb_node_t *node, smb_session_t *session, open_param_t *op) { boolean_t rb; SMB_NODE_VALID(node); SMB_SESSION_VALID(session); mutex_enter(&node->n_mutex); smb_oplock_wait(node); switch (node->n_state) { case SMB_NODE_STATE_AVAILABLE: rb = B_FALSE; break; case SMB_NODE_STATE_OPLOCK_GRANTED: case SMB_NODE_STATE_OPLOCK_BREAKING: if (SMB_SESSION_GET_ID(session) == node->n_oplock.ol_sess_id) { rb = B_FALSE; break; } if (op != NULL) { if (((op->desired_access & ~(FILE_READ_ATTRIBUTES | FILE_WRITE_ATTRIBUTES | SYNCHRONIZE)) == 0) && (op->create_disposition != FILE_SUPERSEDE) && (op->create_disposition != FILE_OVERWRITE)) { /* Attributs only */ rb = B_FALSE; break; } } rb = B_TRUE; break; default: SMB_PANIC(); } mutex_exit(&node->n_mutex); return (rb); } /* * smb_oplock_broadcast * * The the calling thread has the pointer to its context stored in ol_thread * it resets that field. If any other thread is waiting for that field to * turn to NULL it is signaled. * * Returns: * B_TRUE Oplock unlocked * B_FALSE Oplock still locked */ boolean_t smb_oplock_broadcast(smb_node_t *node) { smb_oplock_t *ol; boolean_t rb; SMB_NODE_VALID(node); ol = &node->n_oplock; rb = B_FALSE; mutex_enter(&node->n_mutex); if ((ol->ol_xthread != NULL) && (ol->ol_xthread == curthread)) { ol->ol_xthread = NULL; cv_broadcast(&ol->ol_cv); rb = B_TRUE; } mutex_exit(&node->n_mutex); return (rb); } /* * smb_oplock_wait * * The mutex of the node must have been entered before calling this function. * If the field ol_xthread is not NULL and doesn't contain the pointer to the * context of the calling thread, the caller will sleep until that field is * reset (set to NULL). */ static void smb_oplock_wait(smb_node_t *node) { smb_oplock_t *ol = &node->n_oplock; if ((ol->ol_xthread != NULL) && (ol->ol_xthread != curthread)) { while (ol->ol_xthread != NULL) cv_wait(&ol->ol_cv, &node->n_mutex); } }