/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2010 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * This file contains the audit hook support code for auditing. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* for KM_SLEEP */ #include #include /* snprintf... */ #include #include #include #include /* needs to be included before user.h */ #include /* for M_DONTWAIT */ #include #include #include #include #include #include #include /* for model_t */ #include /* for servicing_interrupt() */ #include #include #include #include #include static void add_return_token(caddr_t *, unsigned int scid, int err, int rval); static void audit_pathbuild(struct pathname *pnp); /* * ROUTINE: AUDIT_SAVEPATH * PURPOSE: * CALLBY: LOOKUPPN * * NOTE: We have reached the end of a path in fs/lookup.c. * We get two pieces of information here: * the vnode of the last component (vp) and * the status of the last access (flag). * TODO: * QUESTION: */ /*ARGSUSED*/ int audit_savepath( struct pathname *pnp, /* pathname to lookup */ struct vnode *vp, /* vnode of the last component */ int flag, /* status of the last access */ cred_t *cr) /* cred of requestor */ { t_audit_data_t *tad; /* current thread */ au_kcontext_t *kctx = GET_KCTX_PZ; tad = U2A(u); /* * this event being audited or do we need path information * later? This might be for a chdir/chroot or open (add path * to file pointer. If the path has already been found for an * open/creat then we don't need to process the path. * * S2E_SP (PAD_SAVPATH) flag comes from audit_s2e[].au_ctrl. Used with * chroot, chdir, open, creat system call processing. It determines * if audit_savepath() will discard the path or we need it later. * PAD_PATHFND means path already included in this audit record. It * is used in cases where multiple path lookups are done per * system call. The policy flag, AUDIT_PATH, controls if multiple * paths are allowed. * S2E_NPT (PAD_NOPATH) flag comes from audit_s2e[].au_ctrl. Used with * exit processing to inhibit any paths that may be added due to * closes. */ if ((tad->tad_flag == 0 && !(tad->tad_ctrl & PAD_SAVPATH)) || ((tad->tad_ctrl & PAD_PATHFND) && !(kctx->auk_policy & AUDIT_PATH)) || (tad->tad_ctrl & PAD_NOPATH)) { return (0); } tad->tad_ctrl |= PAD_NOPATH; /* prevent possible reentry */ audit_pathbuild(pnp); tad->tad_vn = vp; /* * are we auditing only if error, or if it is not open or create * otherwise audit_setf will do it */ if (tad->tad_flag) { if (flag && (tad->tad_scid == SYS_open || tad->tad_scid == SYS_open64 || tad->tad_scid == SYS_openat || tad->tad_scid == SYS_openat64)) { tad->tad_ctrl |= PAD_TRUE_CREATE; } /* add token to audit record for this name */ au_uwrite(au_to_path(tad->tad_aupath)); /* add the attributes of the object */ if (vp) { /* * only capture attributes when there is no error * lookup will not return the vnode of the failing * component. * * if there was a lookup error, then don't add * attribute. if lookup in vn_create(), * then don't add attribute, * it will be added at end of vn_create(). */ if (!flag && !(tad->tad_ctrl & PAD_NOATTRB)) audit_attributes(vp); } } /* free up space if we're not going to save path (open, creat) */ if ((tad->tad_ctrl & PAD_SAVPATH) == 0) { if (tad->tad_aupath != NULL) { au_pathrele(tad->tad_aupath); tad->tad_aupath = NULL; tad->tad_vn = NULL; } } if (tad->tad_ctrl & PAD_MLD) tad->tad_ctrl |= PAD_PATHFND; tad->tad_ctrl &= ~PAD_NOPATH; /* restore */ return (0); } static void audit_pathbuild(struct pathname *pnp) { char *pp; /* pointer to path */ int len; /* length of incoming segment */ int newsect; /* path requires a new section */ struct audit_path *pfxapp; /* prefix for path */ struct audit_path *newapp; /* new audit_path */ t_audit_data_t *tad; /* current thread */ p_audit_data_t *pad; /* current process */ tad = U2A(u); ASSERT(tad != NULL); pad = P2A(curproc); ASSERT(pad != NULL); len = (pnp->pn_path - pnp->pn_buf) + 1; /* +1 for terminator */ ASSERT(len > 0); /* adjust for path prefix: tad_aupath, ATPATH, CRD, or CWD */ mutex_enter(&pad->pad_lock); if (tad->tad_aupath != NULL) { pfxapp = tad->tad_aupath; } else if ((tad->tad_ctrl & PAD_ATCALL) && pnp->pn_buf[0] != '/') { ASSERT(tad->tad_atpath != NULL); pfxapp = tad->tad_atpath; } else if (tad->tad_ctrl & PAD_ABSPATH) { pfxapp = pad->pad_root; } else { pfxapp = pad->pad_cwd; } au_pathhold(pfxapp); mutex_exit(&pad->pad_lock); /* get an expanded buffer to hold the anchored path */ newsect = tad->tad_ctrl & PAD_ATTPATH; newapp = au_pathdup(pfxapp, newsect, len); au_pathrele(pfxapp); pp = newapp->audp_sect[newapp->audp_cnt] - len; if (!newsect) { /* overlay previous NUL terminator */ *(pp - 1) = '/'; } /* now add string of processed path */ bcopy(pnp->pn_buf, pp, len); pp[len - 1] = '\0'; /* perform path simplification as necessary */ audit_fixpath(newapp, len); if (tad->tad_aupath) au_pathrele(tad->tad_aupath); tad->tad_aupath = newapp; /* for case where multiple lookups in one syscall (rename) */ tad->tad_ctrl &= ~(PAD_ABSPATH | PAD_ATTPATH); } /*ARGSUSED*/ /* * ROUTINE: AUDIT_ADDCOMPONENT * PURPOSE: extend the path by the component accepted * CALLBY: LOOKUPPN * NOTE: This function is called only when there is an error in * parsing a path component * TODO: Add the error component to audit record * QUESTION: what is this for */ void audit_addcomponent(struct pathname *pnp) { au_kcontext_t *kctx = GET_KCTX_PZ; t_audit_data_t *tad; tad = U2A(u); /* * S2E_SP (PAD_SAVPATH) flag comes from audit_s2e[].au_ctrl. Used with * chroot, chdir, open, creat system call processing. It determines * if audit_savepath() will discard the path or we need it later. * PAD_PATHFND means path already included in this audit record. It * is used in cases where multiple path lookups are done per * system call. The policy flag, AUDIT_PATH, controls if multiple * paths are allowed. * S2E_NPT (PAD_NOPATH) flag comes from audit_s2e[].au_ctrl. Used with * exit processing to inhibit any paths that may be added due to * closes. */ if ((tad->tad_flag == 0 && !(tad->tad_ctrl & PAD_SAVPATH)) || ((tad->tad_ctrl & PAD_PATHFND) && !(kctx->auk_policy & AUDIT_PATH)) || (tad->tad_ctrl & PAD_NOPATH)) { return; } return; } /* AUDIT_ADDCOMPONENT */ /* * ROUTINE: AUDIT_ANCHORPATH * PURPOSE: * CALLBY: LOOKUPPN * NOTE: * anchor path at "/". We have seen a symbolic link or entering for the * first time we will throw away any saved path if path is anchored. * * flag = 0, path is relative. * flag = 1, path is absolute. Free any saved path and set flag to PAD_ABSPATH. * * If the (new) path is absolute, then we have to throw away whatever we have * already accumulated since it is being superseded by new path which is * anchored at the root. * Note that if the path is relative, this function does nothing * TODO: * QUESTION: */ /*ARGSUSED*/ void audit_anchorpath(struct pathname *pnp, int flag) { au_kcontext_t *kctx = GET_KCTX_PZ; t_audit_data_t *tad; tad = U2A(u); /* * this event being audited or do we need path information * later? This might be for a chdir/chroot or open (add path * to file pointer. If the path has already been found for an * open/creat then we don't need to process the path. * * S2E_SP (PAD_SAVPATH) flag comes from audit_s2e[].au_ctrl. Used with * chroot, chdir, open, creat system call processing. It determines * if audit_savepath() will discard the path or we need it later. * PAD_PATHFND means path already included in this audit record. It * is used in cases where multiple path lookups are done per * system call. The policy flag, AUDIT_PATH, controls if multiple * paths are allowed. * S2E_NPT (PAD_NOPATH) flag comes from audit_s2e[].au_ctrl. Used with * exit processing to inhibit any paths that may be added due to * closes. */ if ((tad->tad_flag == 0 && !(tad->tad_ctrl & PAD_SAVPATH)) || ((tad->tad_ctrl & PAD_PATHFND) && !(kctx->auk_policy & AUDIT_PATH)) || (tad->tad_ctrl & PAD_NOPATH)) { return; } if (flag) { tad->tad_ctrl |= PAD_ABSPATH; if (tad->tad_aupath != NULL) { au_pathrele(tad->tad_aupath); tad->tad_aupath = NULL; tad->tad_vn = NULL; } } } /* * symbolic link. Save previous components. * * the path seen so far looks like this * * +-----------------------+----------------+ * | path processed so far | remaining path | * +-----------------------+----------------+ * \-----------------------/ * save this string if * symbolic link relative * (but don't include symlink component) */ /*ARGSUSED*/ /* * ROUTINE: AUDIT_SYMLINK * PURPOSE: * CALLBY: LOOKUPPN * NOTE: * TODO: * QUESTION: */ void audit_symlink(struct pathname *pnp, struct pathname *sympath) { char *sp; /* saved initial pp */ char *cp; /* start of symlink path */ uint_t len_path; /* processed path before symlink */ t_audit_data_t *tad; au_kcontext_t *kctx = GET_KCTX_PZ; tad = U2A(u); /* * this event being audited or do we need path information * later? This might be for a chdir/chroot or open (add path * to file pointer. If the path has already been found for an * open/creat then we don't need to process the path. * * S2E_SP (PAD_SAVPATH) flag comes from audit_s2e[].au_ctrl. Used with * chroot, chdir, open, creat system call processing. It determines * if audit_savepath() will discard the path or we need it later. * PAD_PATHFND means path already included in this audit record. It * is used in cases where multiple path lookups are done per * system call. The policy flag, AUDIT_PATH, controls if multiple * paths are allowed. * S2E_NPT (PAD_NOPATH) flag comes from audit_s2e[].au_ctrl. Used with * exit processing to inhibit any paths that may be added due to * closes. */ if ((tad->tad_flag == 0 && !(tad->tad_ctrl & PAD_SAVPATH)) || ((tad->tad_ctrl & PAD_PATHFND) && !(kctx->auk_policy & AUDIT_PATH)) || (tad->tad_ctrl & PAD_NOPATH)) { return; } /* * if symbolic link is anchored at / then do nothing. * When we cycle back to begin: in lookuppn() we will * call audit_anchorpath() with a flag indicating if the * path is anchored at / or is relative. We will release * any saved path at that point. * * Note In the event that an error occurs in pn_combine then * we want to remain pointing at the component that caused the * path to overflow the pnp structure. */ if (sympath->pn_buf[0] == '/') return; /* backup over last component */ sp = cp = pnp->pn_path; while (*--cp != '/' && cp > pnp->pn_buf) ; len_path = cp - pnp->pn_buf; /* is there anything to save? */ if (len_path) { pnp->pn_path = pnp->pn_buf; audit_pathbuild(pnp); pnp->pn_path = sp; } } /* * file_is_public : determine whether events for the file (corresponding to * the specified file attr) should be audited or ignored. * * returns: 1 - if audit policy and file attributes indicate that * file is effectively public. read events for * the file should not be audited. * 0 - otherwise * * The required attributes to be considered a public object are: * - owned by root, AND * - world-readable (permissions for other include read), AND * - NOT world-writeable (permissions for other don't * include write) * (mode doesn't need to be checked for symlinks) */ int file_is_public(struct vattr *attr) { au_kcontext_t *kctx = GET_KCTX_PZ; if (!(kctx->auk_policy & AUDIT_PUBLIC) && (attr->va_uid == 0) && ((attr->va_type == VLNK) || ((attr->va_mode & (VREAD>>6)) != 0) && ((attr->va_mode & (VWRITE>>6)) == 0))) { return (1); } return (0); } /* * ROUTINE: AUDIT_ATTRIBUTES * PURPOSE: Audit the attributes so we can tell why the error occurred * CALLBY: AUDIT_SAVEPATH * AUDIT_VNCREATE_FINISH * AUS_FCHOWN...audit_event.c...audit_path.c * NOTE: * TODO: * QUESTION: */ void audit_attributes(struct vnode *vp) { struct vattr attr; struct t_audit_data *tad; tad = U2A(u); if (vp) { attr.va_mask = AT_ALL; if (VOP_GETATTR(vp, &attr, 0, CRED(), NULL) != 0) return; if (file_is_public(&attr) && (tad->tad_ctrl & PAD_PUBLIC_EV)) { /* * This is a public object and a "public" event * (i.e., read only) -- either by definition * (e.g., stat, access...) or by virtue of write access * not being requested (e.g. mmap). * Flag it in the tad to prevent this audit at the end. */ tad->tad_ctrl |= PAD_NOAUDIT; } else { au_uwrite(au_to_attr(&attr)); audit_sec_attributes(&(u_ad), vp); } } } /* * ROUTINE: AUDIT_EXIT * PURPOSE: * CALLBY: EXIT * NOTE: * TODO: * QUESTION: why cmw code as offset by 2 but not here */ /* ARGSUSED */ void audit_exit(int code, int what) { struct t_audit_data *tad; tad = U2A(u); /* * tad_scid will be set by audit_start even if we are not auditing * the event. */ if (tad->tad_scid == SYS_exit) { /* * if we are auditing the exit system call, then complete * audit record generation (no return from system call). */ if (tad->tad_flag && tad->tad_event == AUE_EXIT) audit_finish(0, SYS_exit, 0, 0); return; } /* * Anyone auditing the system call that was aborted? */ if (tad->tad_flag) { au_uwrite(au_to_text("event aborted")); audit_finish(0, tad->tad_scid, 0, 0); } /* * Generate an audit record for process exit if preselected. */ (void) audit_start(0, SYS_exit, AUC_UNSET, 0, 0); audit_finish(0, SYS_exit, 0, 0); } /* * ROUTINE: AUDIT_CORE_START * PURPOSE: * CALLBY: PSIG * NOTE: * TODO: */ void audit_core_start(int sig) { au_event_t event; au_state_t estate; t_audit_data_t *tad; au_kcontext_t *kctx; tad = U2A(u); ASSERT(tad != (t_audit_data_t *)0); ASSERT(tad->tad_scid == 0); ASSERT(tad->tad_event == 0); ASSERT(tad->tad_evmod == 0); ASSERT(tad->tad_ctrl == 0); ASSERT(tad->tad_flag == 0); ASSERT(tad->tad_aupath == NULL); kctx = GET_KCTX_PZ; /* get basic event for system call */ event = AUE_CORE; estate = kctx->auk_ets[event]; if ((tad->tad_flag = auditme(kctx, tad, estate)) == 0) return; /* reset the flags for non-user attributable events */ tad->tad_ctrl = PAD_CORE; tad->tad_scid = 0; /* if auditing not enabled, then don't generate an audit record */ if (!((kctx->auk_auditstate == AUC_AUDITING || kctx->auk_auditstate == AUC_INIT_AUDIT) || kctx->auk_auditstate == AUC_NOSPACE)) { tad->tad_flag = 0; tad->tad_ctrl = 0; return; } tad->tad_event = event; tad->tad_evmod = 0; ASSERT(tad->tad_ad == NULL); au_write(&(u_ad), au_to_arg32(1, "signal", (uint32_t)sig)); } /* * ROUTINE: AUDIT_CORE_FINISH * PURPOSE: * CALLBY: PSIG * NOTE: * TODO: * QUESTION: */ /*ARGSUSED*/ void audit_core_finish(int code) { int flag; t_audit_data_t *tad; au_kcontext_t *kctx; tad = U2A(u); ASSERT(tad != (t_audit_data_t *)0); if ((flag = tad->tad_flag) == 0) { tad->tad_event = 0; tad->tad_evmod = 0; tad->tad_ctrl = 0; ASSERT(tad->tad_aupath == NULL); return; } tad->tad_flag = 0; kctx = GET_KCTX_PZ; /* kludge for error 0, should use `code==CLD_DUMPED' instead */ if (flag = audit_success(kctx, tad, 0, NULL)) { cred_t *cr = CRED(); const auditinfo_addr_t *ainfo = crgetauinfo(cr); ASSERT(ainfo != NULL); /* * Add subject information (no locks since our private copy of * credential */ AUDIT_SETSUBJ(&(u_ad), cr, ainfo, kctx); /* Add a return token (should use f argument) */ add_return_token((caddr_t *)&(u_ad), tad->tad_scid, 0, 0); AS_INC(as_generated, 1, kctx); AS_INC(as_kernel, 1, kctx); } /* Close up everything */ au_close(kctx, &(u_ad), flag, tad->tad_event, tad->tad_evmod, NULL); /* free up any space remaining with the path's */ if (tad->tad_aupath != NULL) { au_pathrele(tad->tad_aupath); tad->tad_aupath = NULL; tad->tad_vn = NULL; } tad->tad_event = 0; tad->tad_evmod = 0; tad->tad_ctrl = 0; } /*ARGSUSED*/ void audit_stropen(struct vnode *vp, dev_t *devp, int flag, cred_t *crp) { } /*ARGSUSED*/ void audit_strclose(struct vnode *vp, int flag, cred_t *crp) { } /*ARGSUSED*/ void audit_strioctl(struct vnode *vp, int cmd, intptr_t arg, int flag, int copyflag, cred_t *crp, int *rvalp) { } /*ARGSUSED*/ void audit_strgetmsg(struct vnode *vp, struct strbuf *mctl, struct strbuf *mdata, unsigned char *pri, int *flag, int fmode) { struct stdata *stp; t_audit_data_t *tad = U2A(u); ASSERT(tad != (t_audit_data_t *)0); stp = vp->v_stream; /* lock stdata from audit_sock */ mutex_enter(&stp->sd_lock); /* proceed ONLY if user is being audited */ if (!tad->tad_flag) { /* * this is so we will not add audit data onto * a thread that is not being audited. */ stp->sd_t_audit_data = NULL; mutex_exit(&stp->sd_lock); return; } stp->sd_t_audit_data = (caddr_t)curthread; mutex_exit(&stp->sd_lock); } /*ARGSUSED*/ void audit_strputmsg(struct vnode *vp, struct strbuf *mctl, struct strbuf *mdata, unsigned char pri, int flag, int fmode) { struct stdata *stp; t_audit_data_t *tad = U2A(u); ASSERT(tad != (t_audit_data_t *)0); stp = vp->v_stream; /* lock stdata from audit_sock */ mutex_enter(&stp->sd_lock); /* proceed ONLY if user is being audited */ if (!tad->tad_flag) { /* * this is so we will not add audit data onto * a thread that is not being audited. */ stp->sd_t_audit_data = NULL; mutex_exit(&stp->sd_lock); return; } stp->sd_t_audit_data = (caddr_t)curthread; mutex_exit(&stp->sd_lock); } /* * ROUTINE: AUDIT_CLOSEF * PURPOSE: * CALLBY: CLOSEF * NOTE: * release per file audit resources when file structure is being released. * * IMPORTANT NOTE: Since we generate an audit record here, we may sleep * on the audit queue if it becomes full. This means * audit_closef can not be called when f_count == 0. Since * f_count == 0 indicates the file structure is free, another * process could attempt to use the file while we were still * asleep waiting on the audit queue. This would cause the * per file audit data to be corrupted when we finally do * wakeup. * TODO: * QUESTION: */ void audit_closef(struct file *fp) { /* AUDIT_CLOSEF */ f_audit_data_t *fad; t_audit_data_t *tad; int success; au_state_t estate; struct vnode *vp; token_t *ad = NULL; struct vattr attr; au_emod_t evmod = 0; const auditinfo_addr_t *ainfo; int getattr_ret; cred_t *cr; au_kcontext_t *kctx = GET_KCTX_PZ; uint32_t auditing; fad = F2A(fp); estate = kctx->auk_ets[AUE_CLOSE]; tad = U2A(u); cr = CRED(); /* audit record already generated by system call envelope */ if (tad->tad_event == AUE_CLOSE) { /* so close audit event will have bits set */ tad->tad_evmod |= (au_emod_t)fad->fad_flags; return; } /* if auditing not enabled, then don't generate an audit record */ auditing = (tad->tad_audit == AUC_UNSET) ? kctx->auk_auditstate : tad->tad_audit; if (auditing & ~(AUC_AUDITING | AUC_INIT_AUDIT | AUC_NOSPACE)) return; ainfo = crgetauinfo(cr); if (ainfo == NULL) return; success = ainfo->ai_mask.as_success & estate; /* not selected for this event */ if (success == 0) return; /* * can't use audit_attributes here since we use a private audit area * to build the audit record instead of the one off the thread. */ if ((vp = fp->f_vnode) != NULL) { attr.va_mask = AT_ALL; getattr_ret = VOP_GETATTR(vp, &attr, 0, CRED(), NULL); } /* * When write was not used and the file can be considered public, * then skip the audit. */ if ((getattr_ret == 0) && ((fp->f_flag & FWRITE) == 0)) { if (file_is_public(&attr)) { return; } } evmod = (au_emod_t)fad->fad_flags; if (fad->fad_aupath != NULL) { au_write((caddr_t *)&(ad), au_to_path(fad->fad_aupath)); } else { #ifdef _LP64 au_write((caddr_t *)&(ad), au_to_arg64( 1, "no path: fp", (uint64_t)fp)); #else au_write((caddr_t *)&(ad), au_to_arg32( 1, "no path: fp", (uint32_t)fp)); #endif } if (getattr_ret == 0) { au_write((caddr_t *)&(ad), au_to_attr(&attr)); audit_sec_attributes((caddr_t *)&(ad), vp); } /* Add subject information */ AUDIT_SETSUBJ((caddr_t *)&(ad), cr, ainfo, kctx); /* add a return token */ add_return_token((caddr_t *)&(ad), tad->tad_scid, 0, 0); AS_INC(as_generated, 1, kctx); AS_INC(as_kernel, 1, kctx); /* * Close up everything * Note: path space recovery handled by normal system * call envelope if not at last close. * Note there is no failure at this point since * this represents closes due to exit of process, * thus we always indicate successful closes. */ au_close(kctx, (caddr_t *)&(ad), AU_OK | AU_DEFER, AUE_CLOSE, evmod, NULL); } /* * ROUTINE: AUDIT_SET * PURPOSE: Audit the file path and file attributes. * CALLBY: SETF * NOTE: SETF associate a file pointer with user area's open files. * TODO: * call audit_finish directly ??? * QUESTION: */ /*ARGSUSED*/ void audit_setf(file_t *fp, int fd) { f_audit_data_t *fad; t_audit_data_t *tad; if (fp == NULL) return; tad = T2A(curthread); fad = F2A(fp); if (!(tad->tad_scid == SYS_open || tad->tad_scid == SYS_open64 || tad->tad_scid == SYS_openat || tad->tad_scid == SYS_openat64)) return; /* no path */ if (tad->tad_aupath == 0) return; /* * assign path information associated with file audit data * use tad hold */ fad->fad_aupath = tad->tad_aupath; tad->tad_aupath = NULL; tad->tad_vn = NULL; if (!(tad->tad_ctrl & PAD_TRUE_CREATE)) { /* adjust event type by dropping the 'creat' part */ switch (tad->tad_event) { case AUE_OPEN_RC: tad->tad_event = AUE_OPEN_R; tad->tad_ctrl |= PAD_PUBLIC_EV; break; case AUE_OPEN_RTC: tad->tad_event = AUE_OPEN_RT; break; case AUE_OPEN_WC: tad->tad_event = AUE_OPEN_W; break; case AUE_OPEN_WTC: tad->tad_event = AUE_OPEN_WT; break; case AUE_OPEN_RWC: tad->tad_event = AUE_OPEN_RW; break; case AUE_OPEN_RWTC: tad->tad_event = AUE_OPEN_RWT; break; default: break; } } } /* * ROUTINE: AUDIT_COPEN * PURPOSE: * CALLBY: COPEN * NOTE: * TODO: * QUESTION: */ /*ARGSUSED*/ void audit_copen(int fd, file_t *fp, vnode_t *vp) { } void audit_ipc(int type, int id, void *vp) { /* if not auditing this event, then do nothing */ if (ad_flag == 0) return; switch (type) { case AT_IPC_MSG: au_uwrite(au_to_ipc(AT_IPC_MSG, id)); au_uwrite(au_to_ipc_perm(&(((kmsqid_t *)vp)->msg_perm))); break; case AT_IPC_SEM: au_uwrite(au_to_ipc(AT_IPC_SEM, id)); au_uwrite(au_to_ipc_perm(&(((ksemid_t *)vp)->sem_perm))); break; case AT_IPC_SHM: au_uwrite(au_to_ipc(AT_IPC_SHM, id)); au_uwrite(au_to_ipc_perm(&(((kshmid_t *)vp)->shm_perm))); break; } } void audit_ipcget(int type, void *vp) { /* if not auditing this event, then do nothing */ if (ad_flag == 0) return; switch (type) { case NULL: au_uwrite(au_to_ipc_perm((struct kipc_perm *)vp)); break; case AT_IPC_MSG: au_uwrite(au_to_ipc_perm(&(((kmsqid_t *)vp)->msg_perm))); break; case AT_IPC_SEM: au_uwrite(au_to_ipc_perm(&(((ksemid_t *)vp)->sem_perm))); break; case AT_IPC_SHM: au_uwrite(au_to_ipc_perm(&(((kshmid_t *)vp)->shm_perm))); break; } } /* * ROUTINE: AUDIT_REBOOT * PURPOSE: * CALLBY: * NOTE: * At this point we know that the system call reboot will not return. We thus * have to complete the audit record generation and put it onto the queue. * This might be fairly useless if the auditing daemon is already dead.... * TODO: * QUESTION: who calls audit_reboot */ void audit_reboot(void) { int flag; t_audit_data_t *tad; au_kcontext_t *kctx = GET_KCTX_PZ; tad = U2A(u); /* if not auditing this event, then do nothing */ if (tad->tad_flag == 0) return; /* do preselection on success/failure */ if (flag = audit_success(kctx, tad, 0, NULL)) { /* add a process token */ cred_t *cr = CRED(); const auditinfo_addr_t *ainfo = crgetauinfo(cr); if (ainfo == NULL) return; /* Add subject information */ AUDIT_SETSUBJ(&(u_ad), cr, ainfo, kctx); /* add a return token */ add_return_token((caddr_t *)&(u_ad), tad->tad_scid, 0, 0); AS_INC(as_generated, 1, kctx); AS_INC(as_kernel, 1, kctx); } /* * Flow control useless here since we're going * to drop everything in the queue anyway. Why * block and wait. There aint anyone left alive to * read the records remaining anyway. */ /* Close up everything */ au_close(kctx, &(u_ad), flag | AU_DONTBLOCK, tad->tad_event, tad->tad_evmod, NULL); } void audit_setfsat_path(int argnum) { klwp_id_t clwp = ttolwp(curthread); struct file *fp; uint32_t fd; t_audit_data_t *tad; struct f_audit_data *fad; p_audit_data_t *pad; /* current process */ struct a { long arg1; long arg2; long arg3; long arg4; long arg5; } *uap; if (clwp == NULL) return; uap = (struct a *)clwp->lwp_ap; tad = U2A(u); ASSERT(tad != NULL); switch (tad->tad_scid) { case SYS_faccessat: case SYS_fchownat: case SYS_fstatat: case SYS_fstatat64: case SYS_openat: case SYS_openat64: case SYS_unlinkat: fd = uap->arg1; break; case SYS_renameat: if (argnum == 3) fd = uap->arg3; else fd = uap->arg1; break; case SYS_utimesys: fd = uap->arg2; break; default: return; } if (tad->tad_atpath != NULL) { au_pathrele(tad->tad_atpath); tad->tad_atpath = NULL; } if (fd != AT_FDCWD) { if ((fp = getf(fd)) == NULL) { tad->tad_ctrl |= PAD_NOPATH; return; } fad = F2A(fp); ASSERT(fad); if (fad->fad_aupath == NULL) { tad->tad_ctrl |= PAD_NOPATH; releasef(fd); return; } au_pathhold(fad->fad_aupath); tad->tad_atpath = fad->fad_aupath; releasef(fd); } else { pad = P2A(curproc); mutex_enter(&pad->pad_lock); au_pathhold(pad->pad_cwd); tad->tad_atpath = pad->pad_cwd; mutex_exit(&pad->pad_lock); } } void audit_symlink_create(vnode_t *dvp, char *sname, char *target, int error) { t_audit_data_t *tad; vnode_t *vp; tad = U2A(u); /* if not auditing this event, then do nothing */ if (tad->tad_flag == 0) return; au_uwrite(au_to_text(target)); if (error) return; error = VOP_LOOKUP(dvp, sname, &vp, NULL, 0, NULL, CRED(), NULL, NULL, NULL); if (error == 0) { audit_attributes(vp); VN_RELE(vp); } } /* * ROUTINE: AUDIT_VNCREATE_START * PURPOSE: set flag so path name lookup in create will not add attribute * CALLBY: VN_CREATE * NOTE: * TODO: * QUESTION: */ void audit_vncreate_start() { t_audit_data_t *tad; tad = U2A(u); tad->tad_ctrl |= PAD_NOATTRB; } /* * ROUTINE: AUDIT_VNCREATE_FINISH * PURPOSE: * CALLBY: VN_CREATE * NOTE: * TODO: * QUESTION: */ void audit_vncreate_finish(struct vnode *vp, int error) { t_audit_data_t *tad; if (error) return; tad = U2A(u); /* if not auditing this event, then do nothing */ if (tad->tad_flag == 0) return; if (tad->tad_ctrl & PAD_TRUE_CREATE) { audit_attributes(vp); } if (tad->tad_ctrl & PAD_CORE) { audit_attributes(vp); tad->tad_ctrl &= ~PAD_CORE; } if (!error && ((tad->tad_event == AUE_MKNOD) || (tad->tad_event == AUE_MKDIR))) { audit_attributes(vp); } /* for case where multiple lookups in one syscall (rename) */ tad->tad_ctrl &= ~PAD_NOATTRB; } /* * ROUTINE: AUDIT_EXEC * PURPOSE: Records the function arguments and environment variables * CALLBY: EXEC_ARGS * NOTE: * TODO: * QUESTION: */ /*ARGSUSED*/ void audit_exec( const char *argstr, /* argument strings */ const char *envstr, /* environment strings */ ssize_t argc, /* total # arguments */ ssize_t envc) /* total # environment variables */ { t_audit_data_t *tad; au_kcontext_t *kctx = GET_KCTX_PZ; tad = U2A(u); /* if not auditing this event, then do nothing */ if (!tad->tad_flag) return; /* return if not interested in argv or environment variables */ if (!(kctx->auk_policy & (AUDIT_ARGV|AUDIT_ARGE))) return; if (kctx->auk_policy & AUDIT_ARGV) { au_uwrite(au_to_exec_args(argstr, argc)); } if (kctx->auk_policy & AUDIT_ARGE) { au_uwrite(au_to_exec_env(envstr, envc)); } } /* * ROUTINE: AUDIT_ENTERPROM * PURPOSE: * CALLBY: KBDINPUT * ZSA_XSINT * NOTE: * TODO: * QUESTION: */ void audit_enterprom(int flg) { token_t *rp = NULL; int sorf; if (flg) sorf = AUM_SUCC; else sorf = AUM_FAIL; AUDIT_ASYNC_START(rp, AUE_ENTERPROM, sorf); au_write((caddr_t *)&(rp), au_to_text("kmdb")); if (flg) au_write((caddr_t *)&(rp), au_to_return32(0, 0)); else au_write((caddr_t *)&(rp), au_to_return32(ECANCELED, 0)); AUDIT_ASYNC_FINISH(rp, AUE_ENTERPROM, NULL, NULL); } /* * ROUTINE: AUDIT_EXITPROM * PURPOSE: * CALLBY: KBDINPUT * ZSA_XSINT * NOTE: * TODO: * QUESTION: */ void audit_exitprom(int flg) { int sorf; token_t *rp = NULL; if (flg) sorf = AUM_SUCC; else sorf = AUM_FAIL; AUDIT_ASYNC_START(rp, AUE_EXITPROM, sorf); au_write((caddr_t *)&(rp), au_to_text("kmdb")); if (flg) au_write((caddr_t *)&(rp), au_to_return32(0, 0)); else au_write((caddr_t *)&(rp), au_to_return32(ECANCELED, 0)); AUDIT_ASYNC_FINISH(rp, AUE_EXITPROM, NULL, NULL); } struct fcntla { int fdes; int cmd; intptr_t arg; }; /* * ROUTINE: AUDIT_C2_REVOKE * PURPOSE: * CALLBY: FCNTL * NOTE: * TODO: * QUESTION: are we keeping this func */ /*ARGSUSED*/ int audit_c2_revoke(struct fcntla *uap, rval_t *rvp) { return (0); } /* * ROUTINE: AUDIT_CHDIREC * PURPOSE: * CALLBY: CHDIREC * NOTE: The main function of CHDIREC * TODO: Move the audit_chdirec hook above the VN_RELE in vncalls.c * QUESTION: */ /*ARGSUSED*/ void audit_chdirec(vnode_t *vp, vnode_t **vpp) { int chdir; int fchdir; struct audit_path **appp; struct file *fp; f_audit_data_t *fad; p_audit_data_t *pad = P2A(curproc); t_audit_data_t *tad = T2A(curthread); struct a { long fd; } *uap = (struct a *)ttolwp(curthread)->lwp_ap; if ((tad->tad_scid == SYS_chdir) || (tad->tad_scid == SYS_chroot)) { chdir = tad->tad_scid == SYS_chdir; if (tad->tad_aupath) { mutex_enter(&pad->pad_lock); if (chdir) appp = &(pad->pad_cwd); else appp = &(pad->pad_root); au_pathrele(*appp); /* use tad hold */ *appp = tad->tad_aupath; tad->tad_aupath = NULL; mutex_exit(&pad->pad_lock); } } else if ((tad->tad_scid == SYS_fchdir) || (tad->tad_scid == SYS_fchroot)) { fchdir = tad->tad_scid == SYS_fchdir; if ((fp = getf(uap->fd)) == NULL) return; fad = F2A(fp); if (fad->fad_aupath) { au_pathhold(fad->fad_aupath); mutex_enter(&pad->pad_lock); if (fchdir) appp = &(pad->pad_cwd); else appp = &(pad->pad_root); au_pathrele(*appp); *appp = fad->fad_aupath; mutex_exit(&pad->pad_lock); if (tad->tad_flag) { au_uwrite(au_to_path(fad->fad_aupath)); audit_attributes(fp->f_vnode); } } releasef(uap->fd); } } /* * ROUTINE: AUDIT_GETF * PURPOSE: * CALLBY: GETF_INTERNAL * NOTE: The main function of GETF_INTERNAL is to associate a given * file descriptor with a file structure and increment the * file pointer reference count. * TODO: remove pass in of fpp. * increment a reference count so that even if a thread with same process delete * the same object, it will not panic our system * QUESTION: * where to decrement the f_count????????????????? * seems like I need to set a flag if f_count incremented through audit_getf */ /*ARGSUSED*/ int audit_getf(int fd) { #ifdef NOTYET t_audit_data_t *tad; tad = T2A(curthread); if (!(tad->tad_scid == SYS_openat || tad->tad_scid == SYS_openat64 || tad->tad_scid == SYS_open || tad->tad_scid == SYS_open64)) return (0); #endif return (0); } /* * Audit hook for stream based socket and tli request. * Note that we do not have user context while executing * this code so we had to record them earlier during the * putmsg/getmsg to figure out which user we are dealing with. */ /*ARGSUSED*/ void audit_sock( int type, /* type of tihdr.h header requests */ queue_t *q, /* contains the process and thread audit data */ mblk_t *mp, /* contains the tihdr.h header structures */ int from) /* timod or sockmod request */ { int32_t len; int32_t offset; struct sockaddr_in *sock_data; struct T_conn_req *conn_req; struct T_conn_ind *conn_ind; struct T_unitdata_req *unitdata_req; struct T_unitdata_ind *unitdata_ind; au_state_t estate; t_audit_data_t *tad; caddr_t saved_thread_ptr; au_mask_t amask; const auditinfo_addr_t *ainfo; au_kcontext_t *kctx; if (q->q_stream == NULL) return; mutex_enter(&q->q_stream->sd_lock); /* are we being audited */ saved_thread_ptr = q->q_stream->sd_t_audit_data; /* no pointer to thread, nothing to do */ if (saved_thread_ptr == NULL) { mutex_exit(&q->q_stream->sd_lock); return; } /* only allow one addition of a record token */ q->q_stream->sd_t_audit_data = NULL; /* * thread is not the one being audited, then nothing to do * This could be the stream thread handling the module * service routine. In this case, the context for the audit * record can no longer be assumed. Simplest to just drop * the operation. */ if (curthread != (kthread_id_t)saved_thread_ptr) { mutex_exit(&q->q_stream->sd_lock); return; } if (curthread->t_sysnum >= SYS_so_socket && curthread->t_sysnum <= SYS_sockconfig) { mutex_exit(&q->q_stream->sd_lock); return; } mutex_exit(&q->q_stream->sd_lock); /* * we know that the thread that did the put/getmsg is the * one running. Now we can get the TAD and see if we should * add an audit token. */ tad = U2A(u); kctx = GET_KCTX_PZ; /* proceed ONLY if user is being audited */ if (!tad->tad_flag) return; ainfo = crgetauinfo(CRED()); if (ainfo == NULL) return; amask = ainfo->ai_mask; /* * Figure out the type of stream networking request here. * Note that getmsg and putmsg are always preselected * because during the beginning of the system call we have * not yet figure out which of the socket or tli request * we are looking at until we are here. So we need to check * against that specific request and reset the type of event. */ switch (type) { case T_CONN_REQ: /* connection request */ conn_req = (struct T_conn_req *)mp->b_rptr; if (conn_req->DEST_offset < sizeof (struct T_conn_req)) return; offset = conn_req->DEST_offset; len = conn_req->DEST_length; estate = kctx->auk_ets[AUE_SOCKCONNECT]; if (amask.as_success & estate || amask.as_failure & estate) { tad->tad_event = AUE_SOCKCONNECT; break; } else { return; } case T_CONN_IND: /* connectionless receive request */ conn_ind = (struct T_conn_ind *)mp->b_rptr; if (conn_ind->SRC_offset < sizeof (struct T_conn_ind)) return; offset = conn_ind->SRC_offset; len = conn_ind->SRC_length; estate = kctx->auk_ets[AUE_SOCKACCEPT]; if (amask.as_success & estate || amask.as_failure & estate) { tad->tad_event = AUE_SOCKACCEPT; break; } else { return; } case T_UNITDATA_REQ: /* connectionless send request */ unitdata_req = (struct T_unitdata_req *)mp->b_rptr; if (unitdata_req->DEST_offset < sizeof (struct T_unitdata_req)) return; offset = unitdata_req->DEST_offset; len = unitdata_req->DEST_length; estate = kctx->auk_ets[AUE_SOCKSEND]; if (amask.as_success & estate || amask.as_failure & estate) { tad->tad_event = AUE_SOCKSEND; break; } else { return; } case T_UNITDATA_IND: /* connectionless receive request */ unitdata_ind = (struct T_unitdata_ind *)mp->b_rptr; if (unitdata_ind->SRC_offset < sizeof (struct T_unitdata_ind)) return; offset = unitdata_ind->SRC_offset; len = unitdata_ind->SRC_length; estate = kctx->auk_ets[AUE_SOCKRECEIVE]; if (amask.as_success & estate || amask.as_failure & estate) { tad->tad_event = AUE_SOCKRECEIVE; break; } else { return; } default: return; } /* * we are only interested in tcp stream connections, * not unix domain stuff */ if ((len < 0) || (len > sizeof (struct sockaddr_in))) { tad->tad_event = AUE_GETMSG; return; } /* skip over TPI header and point to the ip address */ sock_data = (struct sockaddr_in *)((char *)mp->b_rptr + offset); switch (sock_data->sin_family) { case AF_INET: au_write(&(tad->tad_ad), au_to_sock_inet(sock_data)); break; default: /* reset to AUE_PUTMSG if not a inet request */ tad->tad_event = AUE_GETMSG; break; } } void audit_lookupname() { } /*ARGSUSED*/ int audit_pathcomp(struct pathname *pnp, vnode_t *cvp, cred_t *cr) { return (0); } static void add_return_token(caddr_t *ad, unsigned int scid, int err, int rval) { unsigned int sy_flags; #ifdef _SYSCALL32_IMPL /* * Guard against t_lwp being NULL when this function is called * from a kernel queue instead of from a direct system call. * In that case, assume the running kernel data model. */ if ((curthread->t_lwp == NULL) || (lwp_getdatamodel( ttolwp(curthread)) == DATAMODEL_NATIVE)) sy_flags = sysent[scid].sy_flags & SE_RVAL_MASK; else sy_flags = sysent32[scid].sy_flags & SE_RVAL_MASK; #else sy_flags = sysent[scid].sy_flags & SE_RVAL_MASK; #endif if (sy_flags == SE_64RVAL) au_write(ad, au_to_return64(err, rval)); else au_write(ad, au_to_return32(err, rval)); } /*ARGSUSED*/ void audit_fdsend(fd, fp, error) int fd; struct file *fp; int error; /* ignore for now */ { t_audit_data_t *tad; /* current thread */ f_audit_data_t *fad; /* per file audit structure */ struct vnode *vp; /* for file attributes */ /* is this system call being audited */ tad = U2A(u); ASSERT(tad != (t_audit_data_t *)0); if (!tad->tad_flag) return; fad = F2A(fp); /* add path and file attributes */ if (fad != NULL && fad->fad_aupath != NULL) { au_uwrite(au_to_arg32(0, "send fd", (uint32_t)fd)); au_uwrite(au_to_path(fad->fad_aupath)); } else { au_uwrite(au_to_arg32(0, "send fd", (uint32_t)fd)); #ifdef _LP64 au_uwrite(au_to_arg64(0, "no path", (uint64_t)fp)); #else au_uwrite(au_to_arg32(0, "no path", (uint32_t)fp)); #endif } vp = fp->f_vnode; /* include vnode attributes */ audit_attributes(vp); } /* * Record privileges successfully used and we attempted to use but * didn't have. */ void audit_priv(int priv, const priv_set_t *set, int flag) { t_audit_data_t *tad; int sbit; priv_set_t *target; /* Make sure this isn't being called in an interrupt context */ ASSERT(servicing_interrupt() == 0); tad = U2A(u); if (tad->tad_flag == 0) return; target = flag ? &tad->tad_sprivs : &tad->tad_fprivs; sbit = flag ? PAD_SPRIVUSE : PAD_FPRIVUSE; /* Tell audit_success() and audit_finish() that we saw this case */ if (!(tad->tad_evmod & sbit)) { /* Clear set first time around */ priv_emptyset(target); tad->tad_evmod |= sbit; } /* Save the privileges in the tad */ if (priv == PRIV_ALL) { priv_fillset(target); } else { ASSERT(set != NULL || priv != PRIV_NONE); if (set != NULL) priv_union(set, target); if (priv != PRIV_NONE) priv_addset(target, priv); } } /* * Audit the setpriv() system call; the operation, the set name and * the current value as well as the set argument are put in the * audit trail. */ void audit_setppriv(int op, int set, const priv_set_t *newpriv, const cred_t *ocr) { t_audit_data_t *tad; const priv_set_t *oldpriv; priv_set_t report; const char *setname; tad = U2A(u); if (tad->tad_flag == 0) return; oldpriv = priv_getset(ocr, set); /* Generate the actual record, include the before and after */ au_uwrite(au_to_arg32(2, "op", op)); setname = priv_getsetbynum(set); switch (op) { case PRIV_OFF: /* Report privileges actually switched off */ report = *oldpriv; priv_intersect(newpriv, &report); au_uwrite(au_to_privset(setname, &report, AUT_PRIV, 0)); break; case PRIV_ON: /* Report privileges actually switched on */ report = *oldpriv; priv_inverse(&report); priv_intersect(newpriv, &report); au_uwrite(au_to_privset(setname, &report, AUT_PRIV, 0)); break; case PRIV_SET: /* Report before and after */ au_uwrite(au_to_privset(setname, oldpriv, AUT_PRIV, 0)); au_uwrite(au_to_privset(setname, newpriv, AUT_PRIV, 0)); break; } } /* * Dump the full device policy setting in the audit trail. */ void audit_devpolicy(int nitems, const devplcysys_t *items) { t_audit_data_t *tad; int i; tad = U2A(u); if (tad->tad_flag == 0) return; for (i = 0; i < nitems; i++) { au_uwrite(au_to_arg32(2, "major", items[i].dps_maj)); if (items[i].dps_minornm[0] == '\0') { au_uwrite(au_to_arg32(2, "lomin", items[i].dps_lomin)); au_uwrite(au_to_arg32(2, "himin", items[i].dps_himin)); } else au_uwrite(au_to_text(items[i].dps_minornm)); au_uwrite(au_to_privset("read", &items[i].dps_rdp, AUT_PRIV, 0)); au_uwrite(au_to_privset("write", &items[i].dps_wrp, AUT_PRIV, 0)); } } /*ARGSUSED*/ void audit_fdrecv(fd, fp) int fd; struct file *fp; { t_audit_data_t *tad; /* current thread */ f_audit_data_t *fad; /* per file audit structure */ struct vnode *vp; /* for file attributes */ /* is this system call being audited */ tad = U2A(u); ASSERT(tad != (t_audit_data_t *)0); if (!tad->tad_flag) return; fad = F2A(fp); /* add path and file attributes */ if (fad != NULL && fad->fad_aupath != NULL) { au_uwrite(au_to_arg32(0, "recv fd", (uint32_t)fd)); au_uwrite(au_to_path(fad->fad_aupath)); } else { au_uwrite(au_to_arg32(0, "recv fd", (uint32_t)fd)); #ifdef _LP64 au_uwrite(au_to_arg64(0, "no path", (uint64_t)fp)); #else au_uwrite(au_to_arg32(0, "no path", (uint32_t)fp)); #endif } vp = fp->f_vnode; /* include vnode attributes */ audit_attributes(vp); } /* * ROUTINE: AUDIT_CRYPTOADM * PURPOSE: Records arguments to administrative ioctls on /dev/cryptoadm * CALLBY: CRYPTO_LOAD_DEV_DISABLED, CRYPTO_LOAD_SOFT_DISABLED, * CRYPTO_UNLOAD_SOFT_MODULE, CRYPTO_LOAD_SOFT_CONFIG, * CRYPTO_POOL_CREATE, CRYPTO_POOL_WAIT, CRYPTO_POOL_RUN, * CRYPTO_LOAD_DOOR * NOTE: * TODO: * QUESTION: */ void audit_cryptoadm(int cmd, char *module_name, crypto_mech_name_t *mech_names, uint_t mech_count, uint_t device_instance, uint32_t rv, int error) { boolean_t mech_list_required = B_FALSE; cred_t *cr = CRED(); t_audit_data_t *tad; token_t *ad = NULL; const auditinfo_addr_t *ainfo = crgetauinfo(cr); char buffer[MAXNAMELEN * 2]; au_kcontext_t *kctx = GET_KCTX_PZ; tad = U2A(u); if (tad == NULL) return; if (ainfo == NULL) return; tad->tad_event = AUE_CRYPTOADM; if (audit_success(kctx, tad, error, NULL) != AU_OK) return; /* Add subject information */ AUDIT_SETSUBJ((caddr_t *)&(ad), cr, ainfo, kctx); switch (cmd) { case CRYPTO_LOAD_DEV_DISABLED: if (error == 0 && rv == CRYPTO_SUCCESS) { (void) snprintf(buffer, sizeof (buffer), "op=CRYPTO_LOAD_DEV_DISABLED, module=%s," " dev_instance=%d", module_name, device_instance); mech_list_required = B_TRUE; } else { (void) snprintf(buffer, sizeof (buffer), "op=CRYPTO_LOAD_DEV_DISABLED, return_val=%d", rv); } break; case CRYPTO_LOAD_SOFT_DISABLED: if (error == 0 && rv == CRYPTO_SUCCESS) { (void) snprintf(buffer, sizeof (buffer), "op=CRYPTO_LOAD_SOFT_DISABLED, module=%s", module_name); mech_list_required = B_TRUE; } else { (void) snprintf(buffer, sizeof (buffer), "op=CRYPTO_LOAD_SOFT_DISABLED, return_val=%d", rv); } break; case CRYPTO_UNLOAD_SOFT_MODULE: if (error == 0 && rv == CRYPTO_SUCCESS) { (void) snprintf(buffer, sizeof (buffer), "op=CRYPTO_UNLOAD_SOFT_MODULE, module=%s", module_name); } else { (void) snprintf(buffer, sizeof (buffer), "op=CRYPTO_UNLOAD_SOFT_MODULE, return_val=%d", rv); } break; case CRYPTO_LOAD_SOFT_CONFIG: if (error == 0 && rv == CRYPTO_SUCCESS) { (void) snprintf(buffer, sizeof (buffer), "op=CRYPTO_LOAD_SOFT_CONFIG, module=%s", module_name); mech_list_required = B_TRUE; } else { (void) snprintf(buffer, sizeof (buffer), "op=CRYPTO_LOAD_SOFT_CONFIG, return_val=%d", rv); } break; case CRYPTO_POOL_CREATE: (void) snprintf(buffer, sizeof (buffer), "op=CRYPTO_POOL_CREATE"); break; case CRYPTO_POOL_WAIT: (void) snprintf(buffer, sizeof (buffer), "op=CRYPTO_POOL_WAIT"); break; case CRYPTO_POOL_RUN: (void) snprintf(buffer, sizeof (buffer), "op=CRYPTO_POOL_RUN"); break; case CRYPTO_LOAD_DOOR: if (error == 0 && rv == CRYPTO_SUCCESS) (void) snprintf(buffer, sizeof (buffer), "op=CRYPTO_LOAD_DOOR"); else (void) snprintf(buffer, sizeof (buffer), "op=CRYPTO_LOAD_DOOR, return_val=%d", rv); break; case CRYPTO_FIPS140_SET: (void) snprintf(buffer, sizeof (buffer), "op=CRYPTO_FIPS140_SET, fips_state=%d", rv); break; default: return; } au_write((caddr_t *)&ad, au_to_text(buffer)); if (mech_list_required) { int i; if (mech_count == 0) { au_write((caddr_t *)&ad, au_to_text("mech=list empty")); } else { char *pb = buffer; size_t l = sizeof (buffer); size_t n; char space[2] = ":"; n = snprintf(pb, l, "mech="); for (i = 0; i < mech_count; i++) { pb += n; l -= n; if (l < 0) l = 0; if (i == mech_count - 1) (void) strcpy(space, ""); n = snprintf(pb, l, "%s%s", mech_names[i], space); } au_write((caddr_t *)&ad, au_to_text(buffer)); } } /* add a return token */ if (error || (rv != CRYPTO_SUCCESS)) add_return_token((caddr_t *)&ad, tad->tad_scid, -1, error); else add_return_token((caddr_t *)&ad, tad->tad_scid, 0, rv); AS_INC(as_generated, 1, kctx); AS_INC(as_kernel, 1, kctx); au_close(kctx, (caddr_t *)&ad, AU_OK, AUE_CRYPTOADM, tad->tad_evmod, NULL); } /* * Audit the kernel SSL administration command. The address and the * port number for the SSL instance, and the proxy port are put in the * audit trail. */ void audit_kssl(int cmd, void *params, int error) { cred_t *cr = CRED(); t_audit_data_t *tad; token_t *ad = NULL; const auditinfo_addr_t *ainfo = crgetauinfo(cr); au_kcontext_t *kctx = GET_KCTX_PZ; tad = U2A(u); if (ainfo == NULL) return; tad->tad_event = AUE_CONFIGKSSL; if (audit_success(kctx, tad, error, NULL) != AU_OK) return; /* Add subject information */ AUDIT_SETSUBJ((caddr_t *)&ad, cr, ainfo, kctx); switch (cmd) { case KSSL_ADD_ENTRY: { char buf[32]; kssl_params_t *kp = (kssl_params_t *)params; struct sockaddr_in6 *saddr = &kp->kssl_addr; au_write((caddr_t *)&ad, au_to_text("op=KSSL_ADD_ENTRY")); au_write((caddr_t *)&ad, au_to_in_addr_ex((int32_t *)&saddr->sin6_addr)); (void) snprintf(buf, sizeof (buf), "SSL port=%d", saddr->sin6_port); au_write((caddr_t *)&ad, au_to_text(buf)); (void) snprintf(buf, sizeof (buf), "proxy port=%d", kp->kssl_proxy_port); au_write((caddr_t *)&ad, au_to_text(buf)); break; } case KSSL_DELETE_ENTRY: { char buf[32]; struct sockaddr_in6 *saddr = (struct sockaddr_in6 *)params; au_write((caddr_t *)&ad, au_to_text("op=KSSL_DELETE_ENTRY")); au_write((caddr_t *)&ad, au_to_in_addr_ex((int32_t *)&saddr->sin6_addr)); (void) snprintf(buf, sizeof (buf), "SSL port=%d", saddr->sin6_port); au_write((caddr_t *)&ad, au_to_text(buf)); break; } default: return; } /* add a return token */ add_return_token((caddr_t *)&ad, tad->tad_scid, error, 0); AS_INC(as_generated, 1, kctx); AS_INC(as_kernel, 1, kctx); au_close(kctx, (caddr_t *)&ad, AU_OK, AUE_CONFIGKSSL, tad->tad_evmod, NULL); } /* * Audit the kernel PF_POLICY administration commands. Record command, * zone, policy type (global or tunnel, active or inactive) */ /* * ROUTINE: AUDIT_PF_POLICY * PURPOSE: Records arguments to administrative ioctls on PF_POLICY socket * CALLBY: SPD_ADDRULE, SPD_DELETERULE, SPD_FLUSH, SPD_UPDATEALGS, * SPD_CLONE, SPD_FLIP * NOTE: * TODO: * QUESTION: */ void audit_pf_policy(int cmd, cred_t *cred, netstack_t *ns, char *tun, boolean_t active, int error, pid_t pid) { const auditinfo_addr_t *ainfo; t_audit_data_t *tad; token_t *ad = NULL; au_kcontext_t *kctx = GET_KCTX_PZ; char buf[80]; int flag; tad = U2A(u); if (tad == NULL) return; ainfo = crgetauinfo((cred != NULL) ? cred : CRED()); if (ainfo == NULL) return; /* * Initialize some variables since these are only set * with system calls. */ switch (cmd) { case SPD_ADDRULE: { tad->tad_event = AUE_PF_POLICY_ADDRULE; break; } case SPD_DELETERULE: { tad->tad_event = AUE_PF_POLICY_DELRULE; break; } case SPD_FLUSH: { tad->tad_event = AUE_PF_POLICY_FLUSH; break; } case SPD_UPDATEALGS: { tad->tad_event = AUE_PF_POLICY_ALGS; break; } case SPD_CLONE: { tad->tad_event = AUE_PF_POLICY_CLONE; break; } case SPD_FLIP: { tad->tad_event = AUE_PF_POLICY_FLIP; break; } default: tad->tad_event = AUE_NULL; } tad->tad_evmod = 0; if (flag = audit_success(kctx, tad, error, cred)) { zone_t *nszone; /* * For now, just audit that an event happened, * along with the error code. */ au_write((caddr_t *)&ad, au_to_arg32(1, "Policy Active?", (uint32_t)active)); au_write((caddr_t *)&ad, au_to_arg32(2, "Policy Global?", (uint32_t)(tun == NULL))); /* Supplemental data */ /* * Generate this zone token if the target zone differs * from the administrative zone. If netstacks are expanded * to something other than a 1-1 relationship with zones, * the auditing framework should create a new token type * and audit it as a netstack instead. * Turn on general zone auditing to get the administrative zone. */ nszone = zone_find_by_id(netstackid_to_zoneid( ns->netstack_stackid)); if (nszone != NULL) { if (strncmp(crgetzone(cred)->zone_name, nszone->zone_name, ZONENAME_MAX) != 0) { token_t *ztoken; ztoken = au_to_zonename(0, nszone); au_write((caddr_t *)&ad, ztoken); } zone_rele(nszone); } if (tun != NULL) { /* write tunnel name - tun is bounded */ (void) snprintf(buf, sizeof (buf), "tunnel_name:%s", tun); au_write((caddr_t *)&ad, au_to_text(buf)); } /* Add subject information */ AUDIT_SETSUBJ_GENERIC((caddr_t *)&ad, ((cred != NULL) ? cred : CRED()), ainfo, kctx, pid); /* add a return token */ add_return_token((caddr_t *)&ad, 0, error, 0); AS_INC(as_generated, 1, kctx); AS_INC(as_kernel, 1, kctx); } au_close(kctx, (caddr_t *)&ad, flag, tad->tad_event, tad->tad_evmod, NULL); /* * clear the ctrl flag so that we don't have spurious collection of * audit information. */ tad->tad_scid = 0; tad->tad_event = 0; tad->tad_evmod = 0; tad->tad_ctrl = 0; } /* * ROUTINE: AUDIT_SEC_ATTRIBUTES * PURPOSE: Add security attributes * CALLBY: AUDIT_ATTRIBUTES * AUDIT_CLOSEF * AUS_CLOSE * NOTE: * TODO: * QUESTION: */ void audit_sec_attributes(caddr_t *ad, struct vnode *vp) { /* Dump the SL */ if (is_system_labeled()) { ts_label_t *tsl; bslabel_t *bsl; tsl = getflabel(vp); if (tsl == NULL) return; /* nothing else to do */ bsl = label2bslabel(tsl); if (bsl == NULL) return; /* nothing else to do */ au_write(ad, au_to_label(bsl)); label_rele(tsl); } } /* AUDIT_SEC_ATTRIBUTES */