'\" te .\" Copyright (c) 2006, Sun Microsystems, Inc. All Rights Reserved .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] .TH SCSI_VU_ERRMSG 9F "April 9, 2016" .SH NAME scsi_vu_errmsg \- display a SCSI request sense message .SH SYNOPSIS .nf #include \fBvoid\fR \fBscsi_vu_errmsg\fR(\fBstruct scsi_pkt\fR \fI*pktp\fR, \fBchar\fR \fI*drv_name\fR, \fBint severity,\fR \fBint err_blkno,\fR \fBstruct scsi_key_strings\fR \fI*cmdlist\fR, \fBstruct scsi_extended_sense\fR \fI*sensep\fR, \fBstruct scsi_asq_key_strings\fR \fI*asc_list\fR, \fBchar **decode_fru struct scsi_device\fR\fI*\fR, char \fI*\fR, int, char); .fi .SH INTERFACE LEVEL illumos DDI specific (illumos DDI). .SH PARAMETERS The following parameters are supported: .sp .ne 2 .na \fB\fIdevp\fR\fR .ad .RS 14n Pointer to the \fBscsi_device\fR(9S) structure. .RE .sp .ne 2 .na \fB\fIpktp\fR\fR .ad .RS 14n Pointer to a \fBscsi_pkt\fR(9S) structure. .RE .sp .ne 2 .na \fB\fIdrv_name\fR\fR .ad .RS 14n String used by \fBscsi_log\fR(9F). .RE .sp .ne 2 .na \fB\fIseverity\fR\fR .ad .RS 14n Error severity level, maps to severity strings below. .RE .sp .ne 2 .na \fB\fIblkno\fR\fR .ad .RS 14n Requested block number. .RE .sp .ne 2 .na \fB\fIerr_blkno\fR\fR .ad .RS 14n Error block number. .RE .sp .ne 2 .na \fB\fIcmdlist\fR\fR .ad .RS 14n An array of SCSI command description strings. .RE .sp .ne 2 .na \fB\fIsensep\fR\fR .ad .RS 14n A pointer to a \fBscsi_extended_sense\fR(9S) structure. .RE .sp .ne 2 .na \fB\fIasc_list\fR\fR .ad .RS 14n A pointer to a array of asc and ascq message list.The list must be terminated with \fB-1\fR asc value. .RE .sp .ne 2 .na \fB\fIdecode_fru\fR\fR .ad .RS 14n This is a function pointer that will be called after the entire sense information has been decoded. The parameters will be the scsi_device structure to identify the device. Second argument will be a pointer to a buffer of length specified by third argument. The fourth argument will be the FRU byte. \fIdecode_fru\fR might be \fINULL\fR if no special decoding is required. \fIdecode_fru\fR is expected to return pointer to a char string if decoding possible and \fINULL\fR if no decoding is possible. .RE .SH DESCRIPTION This function is very similar to \fBscsi_errmsg\fR(9F) but allows decoding of vendor-unique ASC/ASCQ and FRU information. .sp .LP The \fBscsi_vu_errmsg()\fR function interprets the request sense information in the \fIsensep\fR pointer and generates a standard message that is displayed using \fBscsi_log\fR(9F). It first searches the list array for a matching vendor unique code if supplied. If it does not find one in the list then the standard list is searched. The first line of the message is always a \fBCE_WARN\fR, with the continuation lines being \fBCE_CONT\fR. \fIsensep\fR may be \fINULL\fR, in which case no sense key or vendor information is displayed. .sp .LP The driver should make the determination as to when to call this function based on the severity of the failure and the severity level that the driver wants to report. .sp .LP The \fBscsi_device\fR(9S) structure denoted by \fIdevp\fR supplies the identification of the device that requested the display. \fIseverity\fR selects which string is used in the Error Level: reporting, according to the table below: .sp .in +2 .nf Severity Value: String: SCSI_ERR_ALL All SCSI_ERR_UNKNOWN Unknown SCSI_ERR_INFO Information SCSI_ERR_RECOVERED Recovered SCSI_ERR_RETRYABLE Retryable SCSI_ERR_FATAL Fatal .fi .in -2 .sp .LP \fIblkno\fR is the block number of the original request that generated the error. \fIerr_blkno\fR is the block number where the error occurred. \fIcmdlist\fR is a mapping table for translating the SCSI command code in pktp to the actual command string. .sp .LP The \fIcmdlist\fR is described in the structure below: .sp .in +2 .nf struct scsi_key_strings { int key; char *message; }; .fi .in -2 .sp .LP For a basic SCSI disk, the following list is appropriate: .sp .in +2 .nf static struct scsi_key_strings scsi_cmds[] = { 0x00, "test unit ready", 0x01, "rezero/rewind", 0x03, "request sense", 0x04, "format", 0x07, "reassign", 0x08, "read", 0x0a, "write", 0x0b, "seek", 0x12, "inquiry", 0x15, "mode select", 0x16, "reserve", 0x17, "release", 0x18, "copy", 0x1a, "mode sense", 0x1b, "start/stop", 0x1e, "door lock", 0x28, "read(10)", 0x2a, "write(10)", 0x2f, "verify", 0x37, "read defect data", 0x3b, "write buffer", -1, NULL }; .fi .in -2 .SH CONTEXT The \fBscsi_vu_errmsg()\fR function may be called from user, interrupt, or kernel context. .SH EXAMPLES \fBExample 1 \fRUsing \fBscsi_vu_errmsg()\fR .sp .in +2 .nf struct scsi_asq_key_strings cd_slist[] = { 0x81, 0, "Logical Unit is inaccessible", -1, 0, NULL, }; scsi_vu_errmsg(devp, pkt, "sd", SCSI_ERR_INFO, bp->b_blkno, err_blkno, sd_cmds, rqsense, cd_list, my_decode_fru); .fi .in -2 .sp .LP This generates the following console warning: .sp .in +2 .nf WARNING: /sbus@1,f8000000/esp@0,800000/sd@1,0 (sd1): Error for Command: read Error Level: Informational Requested Block: 23936 Error Block: 23936 Vendor: XYZ Serial Number: 123456 Sense Key: Unit Attention ASC: 0x81 (Logical Unit is inaccessible), ASCQ: 0x0 FRU: 0x11 (replace LUN 1, located in slot 1) .fi .in -2 .SH SEE ALSO .BR cmn_err (9F), .BR scsi_errmsg (9F), .BR scsi_errmsg (9F), .BR scsi_log (9F), .BR scsi_asc_key_strings (9S), .BR scsi_device (9S), .BR scsi_extended_sense (9S), .BR scsi_pkt (9S) .sp .LP \fIWriting Device Drivers\fR .sp .LP \fISTREAMS Programming Guide\fR