'\" te .\" Copyright (c) 2005 Sun Microsystems, Inc. All Rights Reserved. .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] .TH DDI_MEM_REP_GET8 9F "Nov 1, 2005" .SH NAME ddi_mem_rep_get8, ddi_mem_rep_get16, ddi_mem_rep_get32, ddi_mem_rep_get64, ddi_mem_rep_getb, ddi_mem_rep_getl, ddi_mem_rep_getll, ddi_mem_rep_getw \- read multiple data from mapped device in the memory space or allocated DMA memory .SH SYNOPSIS .LP .nf #include #include \fBvoid\fR \fBddi_mem_rep_get8\fR(\fBddi_acc_handle_t\fR \fIhandle\fR, \fBuint8_t *\fR\fIhost_addr\fR, \fBuint8_t *\fR\fIdev_addr\fR, \fBsize_t\fR \fIrepcount\fR, \fBuint_t\fR \fIflags\fR); .fi .LP .nf \fBvoid\fR \fBddi_mem_rep_get16\fR(\fBddi_acc_handle_t\fR \fIhandle\fR, \fBuint16_t *\fR\fIhost_addr\fR, \fBuint16_t *\fR\fIdev_addr\fR, \fBsize_t\fR \fIrepcount\fR, \fBuint_t\fR \fIflags\fR); .fi .LP .nf \fBvoid\fR \fBddi_mem_rep_get32\fR(\fBddi_acc_handle_t\fR \fIhandle\fR, \fBuint32_t *\fR\fIhost_addr\fR, \fBuint32_t *\fR\fIdev_addr\fR, \fBsize_t\fR \fIrepcount\fR, \fBuint_t\fR \fIflags\fR); .fi .LP .nf \fBvoid\fR \fBddi_mem_rep_get64\fR(\fBddi_acc_handle_t\fR \fIhandle\fR, \fBuint64_t *\fR\fIhost_addr\fR, \fBuint64_t *\fR\fIdev_addr\fR, \fBsize_t\fR \fIrepcount\fR, \fBuint_t\fR \fIflags\fR); .fi .SH INTERFACE LEVEL .sp .LP Solaris DDI specific (Solaris DDI). The \fBddi_mem_rep_get8()\fR, \fBddi_mem_rep_get16()\fR, \fBddi_mem_rep_get32()\fR, \fBddi_mem_rep_get64()\fR, \fBddi_mem_rep_getb()\fR, \fBddi_mem_rep_getl()\fR, \fBddi_mem_rep_getll()\fR, and \fBddi_mem_rep_getw()\fR functions are obsolete. The \fBddi_rep_get8\fR(9F) function replaces \fBddi_mem_rep_get8()\fR. The \fBddi_rep_get16\fR(9F) function replaces \fBddi_mem_rep_get16()\fR. The \fBddi_rep_get32\fR(9F) function replaces \fBddi_mem_rep_get32()\fR. The \fBddi_rep_get64\fR(9F) function replaces \fBddi_mem_rep_get64()\fR. The \fBddi_rep_get8\fR(9F) function replaces \fBddi_mem_rep_getb()\fR. The \fBddi_rep_get32\fR(9F) function replaces \fBddi_mem_rep_getl()\fR. The \fBddi_rep_get64\fR(9F) function replaces \fBddi_mem_rep_getll()\fR. The \fBddi_rep_get16\fR(9F) function replaces \fBddi_mem_rep_getw()\fR. .SH PARAMETERS .sp .ne 2 .na \fB\fIhandle\fR\fR .ad .RS 13n The data access handle returned from setup calls, such as \fBddi_regs_map_setup\fR(9F). .RE .sp .ne 2 .na \fB\fIhost_addr\fR\fR .ad .RS 13n Base host address. .RE .sp .ne 2 .na \fB\fIdev_addr\fR\fR .ad .RS 13n Base device address. .RE .sp .ne 2 .na \fB\fIrepcount\fR\fR .ad .RS 13n Number of data accesses to perform. .RE .sp .ne 2 .na \fB\fIflags\fR\fR .ad .RS 13n Device address flags: .sp .ne 2 .na \fB\fBDDI_DEV_AUTOINCR\fR\fR .ad .RS 23n Automatically increment the device address, \fIdev_addr\fR, during data accesses. .RE .sp .ne 2 .na \fB\fBDDI_DEV_NO_AUTOINCR\fR\fR .ad .RS 23n Do not advance the device address, \fIdev_addr\fR, during data accesses. .RE .RE .SH DESCRIPTION .sp .LP These routines generate multiple reads from memory space or allocated \fBDMA \fRmemory. \fIrepcount\fR data is copied from the device address, \fIdev_addr\fR, in memory space to the host address, \fIhost_addr\fR. For each input datum, the \fBddi_mem_rep_get8()\fR, \fBddi_mem_rep_get16()\fR, \fBddi_mem_rep_get32()\fR, and \fBddi_mem_rep_get64()\fR functions read 8 bits, 16 bits, 32 bits and 64 bits of data, respectively, from the device address, \fIdev_addr\fR. \fIdev_addr\fR and \fIhost_addr\fR must be aligned to the datum boundary described by the function. .sp .LP Each individual datum will automatically be translated to maintain a consistent view between the host and the device based on the encoded information in the data access handle. The translation may involve byte-swapping if the host and the device have incompatible endian characteristics. .sp .LP When the \fIflags\fR argument is set to \fBDDI_DEV_AUTOINCR\fR, these functions will treat the device address, \fIdev_addr\fR, as a memory buffer location on the device and increments its address on the next input datum. However, when the \fIflags\fR argument is set to \fBDDI_DEV_NO_AUTOINCR\fR, the same device address will be used for every datum access. For example, this flag may be useful when reading from a data register. .SH CONTEXT .sp .LP These functions can be called from user, kernel, or interrupt context. .SH ATTRIBUTES .sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp .sp .TS box; c | c l | l . ATTRIBUTE TYPE ATTRIBUTE VALUE _ Interface Stability Obsolete .TE .SH SEE ALSO .sp .LP \fBddi_mem_get8\fR(9F), \fBddi_mem_put8\fR(9F), \fBddi_mem_rep_put8\fR(9F), \fBddi_regs_map_setup\fR(9F), \fBddi_rep_get8\fR(9F), \fBddi_rep_get16\fR(9F), \fBddi_rep_get32\fR(9F), \fBddi_rep_get64\fR(9F), \fBddi_device_acc_attr\fR(9S)