'\" te .\" Copyright (c) 2008, Sun Microsystems, Inc. All Rights Reserved. .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] .TH CFGADM_FP 8 "Jan 10, 2008" .SH NAME cfgadm_fp \- driver specific commands for cfgadm .SH SYNOPSIS .LP .nf \fB/usr/sbin/cfgadm\fR [\fB-f\fR] [\fB-n\fR | \fB-y\fR] [\fB-v\fR] [\fB-o\fR \fIhardware_options\fR] \fB-c\fR \fIfunction\fR \fIap_id\fR [\fIap_id\fR] .fi .LP .nf \fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-a\fR] [\fB-s\fR \fIlisting_options\fR] [\fB-o\fR \fIhardware_options\fR] [\fB-l\fR [\fIap_id\fR]] .fi .LP .nf \fB/usr/sbin/cfgadm\fR [\fB-v\fR] [\fB-o\fR \fIhardware_options\fR] \fB-h\fR [\fIap_id\fR] .fi .SH DESCRIPTION .sp .LP The \fBfp\fR port driver plug-in \fB/usr/lib/cfgadm/fp.so.1\fR provides the functionality for Fibre Channel Fabric device node management through \fBcfgadm\fR(8). \fBcfgadm\fR operates on attachment points. Attachment points are locations in the system where hardware resources can be dynamically reconfigured. Refer to \fBcfgadm\fR(8) for additional details on attachment points. .sp .LP For Fibre Channel Fabric device node management, each \fBfp\fR port node is represented by an attachment point in the device tree. In addition, each Fibre Channel device is represented by a dynamic attachment point. Attachment points are named through \fBap_ids\fR. Two types of \fBap_ids\fR are defined: logical and physical. The physical \fBap_id\fR is based on the physical pathname. The logical \fBap_id\fR is a shorter, more user-friendly name. For \fBfp\fR port nodes, the logical \fBap_id\fR is the corresponding disk controller number. For example, \fBc0\fR is a typical logical \fBap_id\fR. .sp .LP Fibre Channel devices are named with a port World Wide Name (WWN). If a disk device is connected to controller \fBc0\fR, its \fBap_id\fR can be: .sp .in +2 .nf c0::50020f2300006077 .fi .in -2 .sp .sp .LP where \fB50020f2300006077\fR identifies the port WWN of a specific Fibre Channel device. .sp .LP Each device on the Fibre Channel private loop port, Fabric port or public loop port is probed and made available to Solaris by default. Devices connected to the Fibre Channel Fabric port or public loop port can be made unavailable to Solaris by initiating an application or an end user operation. The operation is similar to the hot unplugging of devices by way of management user interfaces. Applications or users can use the \fB/usr/lib/cfgadm/fp.so.1\fR library to enable \fBlibcfgadm\fR to provide interfaces to accomplish this task. .sp .LP The list of currently connected Fabric devices is generated in the form of the attachment point. .sp .LP A simple listing of attachment points in the system includes attachment points at \fBfp\fR port nodes but not Fibre Channel devices. The following example uses the \fB-a\fR flag to the list option (\fB-l\fR) to list Fibre Channel devices: .sp .in +2 .nf # \fBcfgadm -l\fR Ap_Id Type Receptacle Occupant Condition c0 fc-fabric connected configured unknown c1 fc-private connected configured unknown c2 fc-pt_to_pt connected configured unknown c3 fc connected unconfigured unknown sysctrl0:slot0 cpu/mem connected configured ok sysctrl0:slot1 sbus-upa connected configured ok .fi .in -2 .sp .sp .LP The following example lists Fibre Channel devices connected to \fBfp\fR ports. .sp .in +2 .nf # \fBcfgadm -al\fR Ap_Id Type Receptacle Occupant Condition c0 fc-fabric connected configured unknown c0::50020f2300006077 disk connected configured unknown c0::50020f23000063a9 disk connected configured unknown c0::50020f2300005f24 disk connected configured unknown c0::50020f2300006107 disk connected configured unknown c1 fc-private connected configured unknown c1::220000203708b69c disk connected configured unknown c1::220000203708ba7d disk connected configured unknown c1::220000203708b8d4 disk connected configured unknown c1::220000203708b9b2 disk connected configured unknown c2 fc-pt_to_pt connected configured unknown c2::500104f000937528 tape connected configured unknown c3 fc connected unconfigured unknown sysctrl0:slot0 cpu/mem connected configured ok sysctrl0:slot1 sbus-upa connected configured ok .fi .in -2 .sp .sp .LP In this example, the \fBfc-fabric\fR type of \fBap_id\fR \fBc0\fR indicates that the \fBfp\fR port is connected to Fabric. For an \fBfp\fR port with a Fabric-related type such as \fBfc-fabric\fR and \fBfc-public\fR, device node creation happens by default at the boot time and can be managed by the \fBcfgadm\fR configure and unconfigure operations. The \fBfc-private\fR type of \fBap_id c1\fR indicates that \fBfp\fR port is connected to private-loop and device node creation happens by default as well. The \fBfc-pt_to_pt\fR type of \fBap_id c2\fR indicates that the \fBfp\fR port is directly connected to another \fBN_port\fR and device node creation also happens by default. The \fBfc\fR type of \fBap_id c3\fR indicates that nothing is attached to \fBfp\fR port \fBc2\fR. The Type field of a Fibre Channel device \fBap_id\fR shows the SCSI device type of LUN 0 in the device. .sp .LP A Fibre Channel device with multiple FCP SCSI LUNs is configured into Solaris and each \fBFCP SCSI LUN\fR is available as a Solaris device. Suppose that ap_ids \fBc0::50020f2300006077\fR and \fBc0::50020f23000063a9\fR represent Fibre Channel devices with multiple \fBFCP SCSI LUN\fRs. .sp .LP The following example shows how to list ap_ids with \fBFCP\fR \fBSCSI\fR \fBLUN\fR information: .sp .in +2 .nf # \fBcfgadm -al -o show_SCSI_LUN\fR Ap_Id Type Receptacle Occupant Condition c0 fc-fabric connected configured unknown c0::50020f2300006077,0 disk connected configured unknown c0::50020f2300006077,1 disk connected configured unknown c0::50020f2300006077,2 disk connected configured unknown c0::50020f2300006077,3 disk connected configured unknown c0::50020f23000063a9,0 disk connected configured unknown c0::50020f23000063a9,1 disk connected configured unknown c0::50020f23000063a9,2 disk connected configured unknown c0::50020f23000063a9,3 disk connected configured unknown c0::50020f2300005f24,0 disk connected unconfigured unknown c0::50020f2300005f24,1 disk connected unconfigured unknown c0::50020f2300006107,0 disk connected unconfigured unknown c0::50020f2300006107,1 disk connected unconfigured unknown c1 fc-private connected configured unknown c1::220000203708b69c,0 disk connected configured unknown c1::220000203708ba7d,0 disk connected configured unknown c1::220000203708b8d4,0 disk connected configured unknown c1::220000203708b9b2,0 disk connected configured unknown c2 fc-pt_to_pt connected configured unknown c2::500104f000937528,0 tape connected configured unknown c3 fc connected unconfigured unknown .fi .in -2 .sp .sp .LP In this example, the \fBap_id c0::50020f2300006077,0\fR identifies the \fBFCP SCSI LUN 0\fR of the Fibre Channel device which is represented by port \fBWWN 50020f2300006077\fR. The Fibre Channel device is reported to have 4 \fBFCP SCSI LUN\fRs and they are all configured. \fB4 FCP SCSI LUN\fR level ap_ids associated with port \fBWWN 50020f2300006077\fR are listed. The listing also displays \fBFCP SCSI LUN\fRs for unconfigured Fibre Channel devices. The Fibre Channel device represented by \fBc0::50020f2300005f24\fR is reported to have two \fBFCP SCSI LUN\fRs. The configure operation \fBon c0::50020f2300005f24\fR creates two Solaris devices. The \fBType\fR field of \fBFCP\fR \fBSCSI\fR \fBLUN\fR level ap_ids show the \fBSCSI\fR device type of each \fBLUN\fR. When a Fibre Channel device has different device type \fBLUN\fRs, the \fBType\fR field reflects that. .sp .LP The receptacle and occupant state for attachment points at the \fBfp\fR port have the following meanings: .sp .ne 2 .na \fBconfigured\fR .ad .sp .6 .RS 4n One or more devices configured on the \fBfp\fR port .RE .sp .ne 2 .na \fBconnected\fR .ad .sp .6 .RS 4n \fBfp\fR port active .RE .sp .ne 2 .na \fBdisconnected\fR .ad .sp .6 .RS 4n \fBfp\fR port quiesced (IO activity is suspended) .RE .sp .ne 2 .na \fBempty\fR .ad .sp .6 .RS 4n Not applicable .RE .sp .ne 2 .na \fBunconfigured\fR .ad .sp .6 .RS 4n No devices configured on the \fBfp\fR port .RE .sp .LP The state for individual Fibre Channel devices on an \fBfp\fR port: .sp .ne 2 .na \fBconfigured\fR .ad .sp .6 .RS 4n Device is configured into Solaris and is available for use .RE .sp .ne 2 .na \fBconnected\fR .ad .sp .6 .RS 4n \fBfp\fR port to which the device is connected to is active .RE .sp .ne 2 .na \fBdisconnected\fR .ad .sp .6 .RS 4n \fBfp\fR port to which the device is attached is quiesced .RE .sp .ne 2 .na \fBunconfigured\fR .ad .sp .6 .RS 4n Device is available to be configured .RE .sp .LP The \fBcondition\fR field for attachment points at the \fBfp\fR port has the following meanings: .sp .ne 2 .na \fBfailed\fR .ad .sp .6 .RS 4n An error condition has prevented the \fBfp\fR port from being able to detect the presence or type of a Fibre Channel connection. .RE .sp .LP The \fBcondition\fR field for individual Fibre Channel devices on an \fBfp\fR port has the following meanings: .sp .ne 2 .na \fBfailed\fR .ad .sp .6 .RS 4n An error is encountered while probing a device on Fabric. .RE .sp .ne 2 .na \fBfailing\fR .ad .sp .6 .RS 4n A device was configured on a host and its state as seen by Solaris appears to be normal (i.e., online) but it is either not currently present or visible in the fabric or its presence could not be verified due to an error condition on the local port through which the device was configured. .RE .sp .ne 2 .na \fBunusable\fR .ad .sp .6 .RS 4n A device has been configured on the host, but is currently offline or failed. .RE .sp .LP The unknown \fBcondition\fR indicates that probing a device on Fabric completed without an error and the device state within Solaris host is normal if the device was configured previously. The internal condition of the device cannot be guaranteed. .SH OPTIONS .sp .LP \fBcfgadm\fR defines several types of operations in addition to listing (\fB-l\fR). These operations include invoking configuration state changes and obtaining configuration administration help messages (\fB-h\fR). .sp .LP The following options are supported: .sp .ne 2 .na \fB\fB-c\fR \fIfunction\fR\fR .ad .sp .6 .RS 4n The following generic commands are defined for the \fBfp\fR-transport-specific library: .sp For Fibre Channel device attachment points on the \fBfc-fabric\fR type \fBfp\fR port attachment point, the following configuration state change operations are supported: .sp .ne 2 .na \fB\fBconfigure\fR\fR .ad .sp .6 .RS 4n Configure a connected Fibre Channel Fabric device to a host. When a Fibre Channel device is listed as an unknown type in the output of the list operation the device might not be configurable. No attempt is made to configure devices with unknown types. The force option (\fB-f\fR) can be used to force the \fBfp\fR port driver plug-in to make an attempt to configure any devices. Any errors in the process are reported. By default, each FCP SCSI LUN that is discovered on a Fibre channel Fabric device is configured. However, FCP SCSI LUNs that are specified in the "pwwn-lun-blacklist" property in the \fBfp.conf\fR file will remain unconfigured. The FCP SCSI LUN level listing reflects the state of such FCP SCSI LUNs. They stay in the "unconfigured" state after reboot or Solaris Dynamic Reconfiguration on the controller that they are connected through. Refer to \fBfp\fR(4D) for additional details on the "pwwn-lun-blacklist" property. .RE .sp .ne 2 .na \fB\fBunconfigure\fR\fR .ad .sp .6 .RS 4n Unconfigure a Fibre Channel Fabric device from a host. This device stays unconfigured until the next reboot or Solaris Dynamic Reconfiguration on the controller that the device is connected, at which time all fabric devices are automatically enumerated. The default behavior may be changed through the use of the "manual_configuration_only" property in the \fBfp.conf\fR file. If the property is set, the device remains unconfigured after reboot. Refer to \fBfp\fR(4D) for additional details on the "manual_configuration_only" property. .RE For Fibre Channel private loop devices and \fBN_Port\fR point-to-point devices, the \fBconfigure\fR command returns success without doing any operation. The \fBunconfigure\fR command is not supported on the private loop devices and \fBN_Port\fR point-to-point devices. The private loop devices and \fBN_Port\fR point-to-point devices are configured by Solaris Fibre Channel drivers by default and are not managed through end user- or application-initiated operations. The \fBpwwn-lun-blacklist\fR property in the \fBfp.conf\fR file is applied to the private loop device and \fBN_Port\fR point-to-point device in the same way it is applied to a Fabric device. .RE .sp .ne 2 .na \fB\fB-f\fR\fR .ad .sp .6 .RS 4n Force the \fBconfigure\fR change state operation to occur irrespective of the \fBcondition\fR or \fBtype\fR. Refer to the above description of the \fBconfigure\fR change state operation. .RE .sp .ne 2 .na \fB\fB-h\fR \fIap_id\fR\fR .ad .sp .6 .RS 4n Obtain \fBfp\fR\(emtransport-specific help. Specify any \fBfp\fR attachment point. .RE .sp .ne 2 .na \fB\fB-o\fR \fIhardware_options\fR\fR .ad .sp .6 .RS 4n The following hardware options are supported. .sp .ne 2 .na \fBshow_SCSI_LUN\fR .ad .sp .6 .RS 4n Lists ap_ids associated with each FCP SCSI LUN for discovered Fibre Channel devices when specified with the \fBlist\fR option \fB-al\fR. Refer to the previously mentioned description and example of FCP SCSI LUN level listing. Device node creation is not supported on the FCP SCSI LUN level. See \fBNOTES\fR. .RE All Fibre Channel devices are available to Solaris by default. Enabling only a subset of Fabric devices available to Solaris by default can be accomplished by setting the property "manual_configuration_only" in \fB/kernel/drv/fp.conf\fR file. When "manual_configuration_only" in \fBfp.conf\fR is set, all Fabric devices are not available to Solaris unless an application or an end user had previously requested the device be configured into Solaris. The \fBconfigure\fR state-change command makes the device available to Solaris. After a successful \fBconfigure\fR operation on a Fabric device, the associated links are added to the \fB/dev\fR namespace. The \fBunconfigure\fR state-change command makes a device unavailable to Solaris. .sp When a Fibre Channel Fabric device is configured successfully to a host using the \fB-c\fR \fBconfigure\fR operation, its physical \fBap_id\fR is stored in a repository. When a Fibre Channel Fabric device is unconfigured using the \fB-c\fR \fBunconfigure\fR operation, its physical \fBap_id\fR is deleted from the same repository. All fabric devices are automatically enumerated by default and the repository is used only if the \fBfp.conf\fR "manual_configuration_only" property is set. Refer to \fBfp\fR(4D) for additional details on the "manual_configuration_only" property. .sp You can specify the following commands with the \fB-c\fR option to control the update behavior of the repository: .sp .ne 2 .na \fB\fBforce_update\fR\fR .ad .sp .6 .RS 4n For \fBconfigure\fR, the attachment point is unconditionally added to the repository; for \fBunconfigure\fR, the attachment point is unconditionally deleted. .RE .sp .ne 2 .na \fB\fBno_update\fR\fR .ad .sp .6 .RS 4n No update is made to the repository regardless of the operation. .RE These options should not be used for normal \fBconfigure\fR and \fBunconfigure\fR operations. See \fBWARNINGS\fR. .sp When a Fibre Channel device has multiple \fBFCP SCSI LUN\fRs configured and any Solaris device associated with its \fBFCP SCSI LUN\fR is in the unusable condition, the whole Fibre Channel device is reported as unusable. The following option with the \fB-c\fR unconfigure command removes only Solaris devices with the unusable condition for a Fibre Channel device. .sp .ne 2 .na \fB\fBunusable_SCSI_LUN\fR\fR .ad .sp .6 .RS 4n For \fBunconfigure\fR operation, any offlined device nodes for a target device is removed. .RE .RE .sp .ne 2 .na \fB\fB-s\fR \fIlisting_options\fR\fR .ad .sp .6 .RS 4n Refer to \fBcfgadm\fR(8) for usage information. .RE .sp .ne 2 .na \fB\fB-t\fR \fIap_id\fR\fR .ad .sp .6 .RS 4n No test commands are available at present. .RE .sp .ne 2 .na \fB\fB-x\fR \fIhardware_function\fR\fR .ad .sp .6 .RS 4n No hardware specific functions are available at present. .RE .sp .LP All other options have the same meaning as defined in the \fBcfgadm\fR(8) man page. .SH EXAMPLES .LP \fBExample 1 \fRUnconfiguring a Disk .sp .LP The following command unconfigures a disk: .sp .in +2 .nf # cfgadm -c unconfigure c0::210000203708b606 .fi .in -2 .sp .LP \fBExample 2 \fRUnconfigure all the Configured Disks under Single Attachment Point .sp .LP The following command unconfigures all configured disks under the attachment point \fBc0\fR. .sp .in +2 .nf # cfgadm -c unconfigure c0 .fi .in -2 .sp .LP \fBExample 3 \fRConfiguring a Disk .sp .LP The following command configures a disk: .sp .in +2 .nf # cfgadm -c configure c0::210000203708b606 .fi .in -2 .sp .LP \fBExample 4 \fRConfigure all the Unconfigured Disks under Single Attachment Point .sp .LP The following command configures all unconfigured disks under the attachment point \fBc0\fR. .sp .in +2 .nf # cfgadm -c configure c0 .fi .in -2 .sp .LP \fBExample 5 \fRRemoving the Fibre Channel Fabric Device Attachment Point from Repository .sp .LP The following command unconditionally removes the fibre channel fabric device attachment point from the Fabric device repository. .sp .in +2 .nf # cfgadm -c unconfigure -o force_update c0::210000203708b606 .fi .in -2 .sp .LP \fBExample 6 \fRRemoving Offlined Solaris Device Nodes for a Target Device .sp .LP The following command removes offlined Solaris device nodes for a target device: .sp .in +2 .nf # cfgadm -c unconfigure -o unusable_SCSI_LUN c0::210000203708b606 .fi .in -2 .sp .SH FILES .sp .ne 2 .na \fB\fB/usr/lib/cfgadm/fp.so.1\fR\fR .ad .sp .6 .RS 4n Hardware-specific library for Fibre Channel Fabric device node management. .RE .sp .ne 2 .na \fB\fB/etc/cfg/fp/fabric_WWN_map\fR\fR .ad .sp .6 .RS 4n Repository of physical \fBap_id\fRs of Fabric devices currently configured. It is used only to reconfigure those Fabric devices at boot time. This repository is only used when the "manual_configuration_only" \fB/kernel/drv/fp.conf\fR file is set. .RE .sp .ne 2 .na \fB\fB/etc/rcS.d/fdevattach\fR\fR .ad .sp .6 .RS 4n Reconfigures Fabric device(s) of which physical \fBap_id\fR is listed in \fB/etc/cfg/fp/fabric_WWN_map\fR on boot time. .RE .SH SEE ALSO .sp .LP .BR svcs (1), .BR config_admin (3CFGADM), .BR libcfgadm (3LIB), .BR fp (4D), .BR attributes (7), .BR smf (7), .BR cfgadm (8), .BR svcadm (8) .SH WARNINGS .sp .LP Do not use hardware-specific options for the repository update under normal \fBconfigure\fR/\fBunconfigure\fR operations. The hardware-specific options are expected to be used when the node creation of a Fabric device fails at boot time and the error condition is considered to be permanent. The \fBunconfigure\fR command with \fBforce_update\fR hardware-specific option unconditionally removes the attachment point of a failing Fabric device from the repository. .SH NOTES .sp .LP For devices with unknown or no SCSI device type (for example, a Fibre Channel Host Bus Adapter), the \fBconfigure\fR operation might not be applicable. .sp .LP The \fBconfigure\fR and \fBunconfigure\fR commands operate on the Fibre Channel device level which is represented by port WWN ap_id. If a Fibre Channel device has multiple FCP SCSI LUNs configured, the \fBconfigure\fR command on the associated port WWN ap_id results in creating a Solaris device for each \fBFCP SCSI LUN\fR unless it is specified in the "pwwn-lun-blacklist" property in the \fBfp.conf\fR file. The \fBunconfigure\fR command removes all Solaris devices associated with the port WWN ap_id. The \fBFCP SCSI LUN\fR level ap_id is not valid for the \fBconfigure\fR and \fBunconfigure\fR commands. .sp .LP The deprecated \fBshow_FCP_dev\fR option has been replaced by the new \fBshow_SCSI_LUN\fR option, and the deprecated \fBunusable_FCP_dev\fR option has been replaced by the new \fBunusable_SCSI_LUN\fR option. .sp .LP The \fBcfgadm_fp\fR service is managed by the service management facility, \fBsmf\fR(7), under the service identifier: .sp .in +2 .nf svc:/system/device/fc-fabric:default .fi .in -2 .sp .sp .LP Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using \fBsvcadm\fR(8). The service's status can be queried using the \fBsvcs\fR(1) command. .sp .LP No administrative actions on this service are required for Fabric device configuration once this service is started on boot time.