.\"
.\" Sun Microsystems, Inc. gratefully acknowledges The Open Group for
.\" permission to reproduce portions of its copyrighted documentation.
.\" Original documentation from The Open Group can be obtained online at
.\" http://www.opengroup.org/bookstore/.
.\"
.\" The Institute of Electrical and Electronics Engineers and The Open
.\" Group, have given us permission to reprint portions of their
.\" documentation.
.\"
.\" In the following statement, the phrase ``this text'' refers to portions
.\" of the system documentation.
.\"
.\" Portions of this text are reprinted and reproduced in electronic form
.\" in the SunOS Reference Manual, from IEEE Std 1003.1, 2004 Edition,
.\" Standard for Information Technology -- Portable Operating System
.\" Interface (POSIX), The Open Group Base Specifications Issue 6,
.\" Copyright (C) 2001-2004 by the Institute of Electrical and Electronics
.\" Engineers, Inc and The Open Group.  In the event of any discrepancy
.\" between these versions and the original IEEE and The Open Group
.\" Standard, the original IEEE and The Open Group Standard is the referee
.\" document.  The original Standard can be obtained online at
.\" http://www.opengroup.org/unix/online.html.
.\"
.\" This notice shall appear on any product containing this material.
.\"
.\" The contents of this file are subject to the terms of the
.\" Common Development and Distribution License (the "License").
.\" You may not use this file except in compliance with the License.
.\"
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
.\" or http://www.opensolaris.org/os/licensing.
.\" See the License for the specific language governing permissions
.\" and limitations under the License.
.\"
.\" When distributing Covered Code, include this CDDL HEADER in each
.\" file and include the License file at usr/src/OPENSOLARIS.LICENSE.
.\" If applicable, add the following below this CDDL HEADER, with the
.\" fields enclosed by brackets "[]" replaced with your own identifying
.\" information: Portions Copyright [yyyy] [name of copyright owner]
.\"
.\"
.\" Copyright (c) 1992, X/Open Company Limited  All Rights Reserved
.\" Portions Copyright (c) 1999, Sun Microsystems, Inc.  All Rights Reserved
.\" Copyright 2017 Nexenta Systems, Inc.
.\"
.Dd August 14, 2020
.Dt REGEX 7
.Os
.Sh NAME
.Nm regex
.Nd internationalized basic and extended regular expression matching
.Sh DESCRIPTION
Regular Expressions
.Pq REs
provide a mechanism to select specific strings from a set of character strings.
The Internationalized Regular Expressions described below differ from the Simple
Regular Expressions described on the
.Xr regexp 7
manual page in the following ways:
.Bl -bullet
.It
both Basic and Extended Regular Expressions are supported
.It
the Internationalization features -- character class, equivalence class, and
multi-character collation -- are supported.
.El
.Pp
The Basic Regular Expression
.Pq BRE
notation and construction rules described in the
.Sx BASIC REGULAR EXPRESSIONS
section apply to most utilities supporting regular expressions.
Some utilities, instead, support the Extended Regular Expressions
.Pq ERE
described in the
.Sx EXTENDED REGULAR EXPRESSIONS
section; any exceptions for both cases are noted in the descriptions of the
specific utilities using regular expressions.
Both BREs and EREs are supported by the Regular Expression Matching interfaces
.Xr regcomp 3C
and
.Xr regexec 3C .
.Sh BASIC REGULAR EXPRESSIONS
.Ss BREs Matching a Single Character
A BRE ordinary character, a special character preceded by a backslash, or a
period matches a single character.
A bracket expression matches a single character or a single collating element.
See
.Sx RE Bracket Expression ,
below.
.Ss BRE Ordinary Characters
An ordinary character is a BRE that matches itself: any character in the
supported character set, except for the BRE special characters listed in
.Sx BRE Special Characters ,
below.
.Pp
The interpretation of an ordinary character preceded by a backslash
.Pq Qq \e
is undefined, except for:
.Bl -enum
.It
the characters
.Qq \&) ,
.Qq \&( ,
.Qq { ,
and
.Qq }
.It
the digits 1 to 9 inclusive
.Po see
.Sx BREs Matching Multiple Characters ,
below
.Pc
.It
a character inside a bracket expression.
.El
.Ss BRE Special Characters
A BRE special character has special properties in certain contexts.
Outside those contexts, or when preceded by a backslash, such a character will
be a BRE that matches the special character itself.
The BRE special characters and the contexts in which they have their special
meaning are:
.Bl -tag -width Ds
.It Sy \&. \&[ \&\e
The period, left-bracket, and backslash are special except when used in a
bracket expression
.Po see
.Sx RE Bracket Expression ,
below
.Pc .
An expression containing a
.Qq \&[
that is not preceded by a backslash and is not part of a bracket expression
produces undefined results.
.It Sy *
The asterisk is special except when used:
.Bl -bullet
.It
in a bracket expression
.It
as the first character of an entire BRE
.Po after an initial
.Qq ^ ,
if any
.Pc
.It
as the first character of a subexpression
.Po after an initial
.Qq ^ ,
if any; see
.Sx BREs Matching Multiple Characters ,
below
.Pc .
.El
.It Sy ^
The circumflex is special when used:
.Bl -bullet
.It
as an anchor
.Po see
.Sx BRE Expression Anchoring ,
below
.Pc .
.It
as the first character of a bracket expression
.Po see
.Sx RE Bracket Expression ,
below
.Pc .
.El
.It Sy $
The dollar sign is special when used as an anchor.
.El
.Ss Periods in BREs
A period
.Pq Qq \&. ,
when used outside a bracket expression, is a BRE that matches any character in
the supported character set except NUL.
.Ss RE Bracket Expression
A bracket expression
.Po an expression enclosed in square brackets,
.Qq []
.Pc
is an RE that matches a single collating element contained in the non-empty set
of collating elements represented by the bracket expression.
.Pp
The following rules and definitions apply to bracket expressions:
.Bl -enum
.It
A
.Em bracket expression
is either a matching list expression or a non-matching list expression.
It consists of one or more expressions: collating elements, collating symbols,
equivalence classes, character classes, or range expressions
.Pq see rule 7 below .
Portable applications must not use range expressions, even though all
implementations support them.
The right-bracket
.Pq Qq \&]
loses its special meaning and represents itself in a bracket expression if it
occurs first in the list
.Po after an initial circumflex
.Pq Qq ^ ,
if any
.Pc .
Otherwise, it terminates the bracket expression, unless it appears in a
collating symbol
.Po such as
.Qq [.].]
.Pc
or is the ending right-bracket for a collating symbol, equivalence class, or
character class.
.Pp
The special characters
.Qq \&. ,
.Qq * ,
.Qq \&[ ,
.Qq \&\e
.Pq period, asterisk, left-bracket and backslash, respectively
lose their special meaning within a bracket expression.
.Pp
The character sequences
.Qq [. ,
.Qq [= ,
.Qq [:
.Pq left-bracket followed by a period, equals-sign, or colon
are special inside a bracket expression and are used to delimit collating
symbols, equivalence class expressions, and character class expressions.
These symbols must be followed by a valid expression and the matching
terminating sequence
.Qq .] ,
.Qq =]
or
.Qq :] ,
as described in the following items.
.It
A
.Em matching list expression
specifies a list that matches any one of the expressions represented in the
list.
The first character in the list must not be the circumflex.
For example,
.Qq [abc]
is an RE that matches any of the characters
.Qq a ,
.Qq b
or
.Qq c .
.It
A
.Em non-matching list expression
begins with a circumflex
.Pq Qq ^ ,
and specifies a list that matches any character or collating element except for
the expressions represented in the list after the leading circumflex.
For example,
.Qq [^abc]
is an RE that matches any character or collating element except the characters
.Qq a ,
.Qq b ,
or
.Qq c .
The circumflex will have this special meaning only when it occurs first in the
list, immediately following the left-bracket.
.It
A
.Em collating symbol
is a collating element enclosed within bracket-period
.Pq Qq [..]
delimiters.
Multi-character collating elements must be represented as collating symbols when
it is necessary to distinguish them from a list of the individual characters
that make up the multi-character collating element.
For example, if the string
.Qq ch
is a collating element in the current collation sequence with the associated
collating symbol
.Qq Aq ch ,
the expression
.Qq [[.ch.]]
will be treated as an RE matching the character sequence
.Qq ch ,
while
.Qq [ch]
will be treated as an RE matching
.Qq c
or
.Qq h .
Collating symbols will be recognized only inside bracket expressions.
This implies that the RE
.Qq [[.ch.]]*c
matches the first to fifth character in the string
.Qq chchch.
If the string is not a collating element in the current collating sequence
definition, or if the collating element has no characters associated with it,
the symbol will be treated as an invalid expression.
.It
An
.Em equivalence class expression
represents the set of collating elements belonging to an equivalence class.
Only primary equivalence classes will be recognised.
The class is expressed by enclosing any one of the collating elements in the
equivalence class within bracket-equal
.Pq Qq [==]
delimiters.
For example, if
.Qq a
and
.Qq b
belong to the same equivalence class, then
.Qq [[=a=]b] ,
.Qq [[==]a]
and
.Qq [[==]b]
will each be equivalent to
.Qq [ab] .
If the collating element does not belong to an equivalence class, the
equivalence class expression will be treated as a
.Em collating symbol .
.It
A
.Em character class expression
represents the set of characters belonging to a character class, as defined in
the
.Ev LC_CTYPE
category in the current locale.
All character classes specified in the current locale will be recognized.
A character class expression is expressed as a character class name enclosed
within bracket-colon
.Pq Qq [::]
delimiters.
.Pp
The following character class expressions are supported in all locales:
.Bl -column "[:alnum:]" "[:cntrl:]" "[:lower:]" "[:xdigit:]"
.It [:alnum:] Ta [:cntrl:] Ta [:lower:] Ta [:space:]
.It [:alpha:] Ta [:digit:] Ta [:print:] Ta [:upper:]
.It [:blank:] Ta [:graph:] Ta [:punct:] Ta [:xdigit:]
.El
.Pp
In addition, character class expressions of the form
.Qq [:name:]
are recognized in those locales where the
.Em name
keyword has been given a
.Em charclass
definition in the
.Ev LC_CTYPE
category.
.It
A
.Em range expression
represents the set of collating elements that fall between two elements in the
current collation sequence, inclusively.
It is expressed as the starting point and the ending point separated by a hyphen
.Pq Qq - .
.Pp
Range expressions must not be used in portable applications because their
behavior is dependent on the collating sequence.
Ranges will be treated according to the current collating sequence, and include
such characters that fall within the range based on that collating sequence,
regardless of character values.
This, however, means that the interpretation will differ depending on collating
sequence.
If, for instance, one collating sequence defines as a variant of
.Qq a ,
while another defines it as a letter following
.Qq z ,
then the expression
.Qq [-z]
is valid in the first language and invalid in the second.
.sp
In the following, all examples assume the collation sequence specified for the
POSIX locale, unless another collation sequence is specifically defined.
.Pp
The starting range point and the ending range point must be a collating element
or collating symbol.
An equivalence class expression used as a starting or ending point of a range
expression produces unspecified results.
An equivalence class can be used portably within a bracket expression, but only
outside the range.
For example, the unspecified expression
.Qq [[=e=]-f]
should be given as
.Qq [[=e=]e-f] .
The ending range point must collate equal to or higher than the starting range
point; otherwise, the expression will be treated as invalid.
The order used is the order in which the collating elements are specified in the
current collation definition.
One-to-many mappings
.Po see
.Xr locale 7
.Pc
will not be performed.
For example, assuming that the character
.Qq eszet
is placed in the collation sequence after
.Qq r
and
.Qq s ,
but before
.Qq t ,
and that it maps to the sequence
.Qq ss
for collation purposes, then the expression
.Qq [r-s]
matches only
.Qq r
and
.Qq s ,
but the expression
.Qq [s-t]
matches
.Qq s ,
.Qq beta ,
or
.Qq t .
.Pp
The interpretation of range expressions where the ending range point is also
the starting range point of a subsequent range expression
.Po for instance
.Qq [a-m-o]
.Pc
is undefined.
.Pp
The hyphen character will be treated as itself if it occurs first
.Po after an initial
.Qq ^ ,
if any
.Pc
or last in the list, or as an ending range point in a range expression.
As examples, the expressions
.Qq [-ac]
and
.Qq [ac-]
are equivalent and match any of the characters
.Qq a ,
.Qq c ,
or
.Qq -;
.Qq [^-ac]
and
.Qq [^ac-]
are equivalent and match any characters except
.Qq a ,
.Qq c ,
or
.Qq -;
the expression
.Qq [%--]
matches any of the characters between
.Qq %
and
.Qq -
inclusive; the expression
.Qq [--@]
matches any of the characters between
.Qq -
and
.Qq @
inclusive; and the expression
.Qq [a--@]
is invalid, because the letter
.Qq a
follows the symbol
.Qq -
in the POSIX locale.
To use a hyphen as the starting range point, it must either come first in the
bracket expression or be specified as a collating symbol, for example:
.Qq [][.-.]-0] ,
which matches either a right bracket or any character or collating element that
collates between hyphen and 0, inclusive.
.Pp
If a bracket expression must specify both
.Qq -
and
.Qq \&] ,
the
.Qq \&]
must be placed first
.Po after the
.Qq ^ ,
if any
.Pc
and the
.Qq -
last within the bracket expression.
.El
.Pp
Note: Latin-1 characters such as
.Qq \(ga
or
.Qq ^
are not printable in some locales, for example, the
.Em ja
locale.
.Ss BREs Matching Multiple Characters
The following rules can be used to construct BREs matching multiple characters
from BREs matching a single character:
.Bl -enum
.It
The concatenation of BREs matches the concatenation of the strings matched
by each component of the BRE.
.It
A
.Em subexpression
can be defined within a BRE by enclosing it between the character pairs
.Qq \e(
and
.Qq \e) .
Such a subexpression matches whatever it would have matched without the
.Qq \e(
and
.Qq \e) ,
except that anchoring within subexpressions is optional behavior; see
.Sx BRE Expression Anchoring ,
below.
Subexpressions can be arbitrarily nested.
.It
The
.Em back-reference
expression
.Qq \e Ns Em n
matches the same
.Pq possibly empty
string of characters as was matched by a subexpression enclosed between
.Qq \e(
and
.Qq \e)
preceding the
.Qq \e Ns Em n .
The character
.Qq Em n
must be a digit from 1 to 9 inclusive,
.Em n Ns th
subexpression
.Po the one that begins with the
.Em n Ns th
.Qq \e(
and ends with the corresponding paired
.Qq \e)
.Pc .
The expression is invalid if less than
.Em n
subexpressions precede the
.Qq \e Ns Em n .
For example, the expression
.Qq ^\e(.*\e)\e1$
matches a line consisting of two adjacent appearances of the same string, and
the expression
.Qq \e(a\e)*\e1
fails to match
.Qq a .
The limit of nine back-references to subexpressions in the RE is based on the
use of a single digit identifier.
This does not imply that only nine subexpressions are allowed in REs.
.It
When a BRE matching a single character, a subexpression or a back-reference is
followed by the special character asterisk
.Pq Qq * ,
together with that asterisk it matches what zero or more consecutive occurrences
of the BRE would match.
For example,
.Qq [ab]*
and
.Qq [ab][ab]
are equivalent when matching the string
.Qq ab .
.It
When a BRE matching a single character, a subexpression, or a back-reference
is followed by an
.Em interval expression
of the format
.Qq \e{ Ns Em m Ns \e} ,
.Qq \e{ Ns Em m Ns ,\e}
or
.Qq \e{ Ns Em m Ns \&, Ns Em n Ns \e} ,
together with that interval expression it matches what repeated consecutive
occurrences of the BRE would match.
The values of
.Em m
and
.Em n
will be decimal integers in the range 0 <=
.Em m
<=
.Em n
<=
.Dv BRE_DUP_MAX ,
where
.Em m
specifies the exact or minimum number of occurrences and
.Em n
specifies the maximum number of occurrences.
The expression
.Qq \e{ Ns Em m Ns \e}
matches exactly
.Em m
occurrences of the preceding BRE,
.Qq \e{ Ns Em m Ns ,\e}
matches at least
.Em m
occurrences and
.Qq \e{ Ns Em m Ns \&, Ns Em n Ns \e}
matches any number of occurrences between
.Em m
and
.Em n ,
inclusive.
.Pp
For example, in the string
.Qq abababccccccd ,
the BRE
.Qq c\e{3\e}
is matched by characters seven to nine, the BRE
.Qq \e(ab\e)\e{4,\e}
is not matched at all and the BRE
.Qq c\e{1,3\e}d
is matched by characters ten to thirteen.
.El
.Pp
The behavior of multiple adjacent duplication symbols
.Po Qq *
and intervals
.Pc
produces undefined results.
.Ss BRE Precedence
The order of precedence is as shown in the following table:
.Bl -column "BRE Precedence (from high to low)" ""
.It Sy BRE Precedence (from high to low) Ta
.It collation-related bracket symbols Ta [= =]  [: :]  [. .]
.It escaped characters Ta \e< Ns Em special character Ns >
.It bracket expression Ta [ ]
.It subexpressions/back-references Ta \e( \e) \e Ns Em n
.It single-character-BRE duplication Ta * \e{ Ns Em m Ns \&, Ns Em n Ns \e}
.It concatenation Ta
.It anchoring Ta ^ $
.El
.Ss BRE Expression Anchoring
A BRE can be limited to matching strings that begin or end a line; this is
called
.Em anchoring .
The circumflex and dollar sign special characters will be considered BRE anchors
in the following contexts:
.Bl -enum
.It
A circumflex
.Pq Qq ^
is an anchor when used as the first character of an entire BRE.
The implementation may treat circumflex as an anchor when used as the first
character of a subexpression.
The circumflex will anchor the expression to the beginning of a string;
only sequences starting at the first character of a string will be matched by
the BRE.
For example, the BRE
.Qq ^ab
matches
.Qq ab
in the string
.Qq abcdef ,
but fails to match in the string
.Qq cdefab .
A portable BRE must escape a leading circumflex in a subexpression to match a
literal circumflex.
.It
A dollar sign
.Pq Qq $
is an anchor when used as the last character of an entire BRE.
The implementation may treat a dollar sign as an anchor when used as the last
character of a subexpression.
The dollar sign will anchor the expression to the end of the string being
matched; the dollar sign can be said to match the end-of-string following the
last character.
.It
A BRE anchored by both
.Qq ^
and
.Qq $
matches only an entire string.
For example, the BRE
^abcdef$
matches strings consisting only of
.Qq abcdef .
.It
.Qq ^
and
.Qq $
are not special in subexpressions.
.El
.Pp
Note: The Solaris implementation does not support anchoring in BRE
subexpressions.
.Sh EXTENDED REGULAR EXPRESSIONS
The rules specified for BREs apply to Extended Regular Expressions
.Pq EREs
with the following exceptions:
.Bl -bullet
.It
The characters
.Qq | ,
.Qq + ,
and
.Qq \&?
have special meaning, as defined below.
.It
The
.Qq {
and
.Qq }
characters, when used as the duplication operator, are not preceded by
backslashes.
The constructs
.Qq \e{
and
.Qq \e}
simply match the characters
.Qq {
and
.Qq }, respectively.
.It
The back reference operator is not supported.
.It
Anchoring
.Pq Qq ^$
is supported in subexpressions.
.El
.Ss EREs Matching a Single Character
An ERE ordinary character, a special character preceded by a backslash, or a
period matches a single character.
A bracket expression matches a single character or a single collating element.
An
.Em ERE matching a single character
enclosed in parentheses matches the same as the ERE without parentheses would
have matched.
.Ss ERE Ordinary Characters
An
.Em ordinary character
is an ERE that matches itself.
An ordinary character is any character in the supported character set, except
for the ERE special characters listed in
.Sx ERE Special Characters
below.
The interpretation of an ordinary character preceded by a backslash
.Pq Qq \&\e
is undefined.
.Ss ERE Special Characters
An
.Em ERE special character
has special properties in certain contexts.
Outside those contexts, or when preceded by a backslash, such a character is an
ERE that matches the special character itself.
The extended regular expression special characters and the contexts in which
they have their special meaning are:
.Bl -tag -width Ds
.It Sy \&. \&[ \&\e \&(
The period, left-bracket, backslash, and left-parenthesis are special except
when used in a bracket expression
.Po see
.Sx RE Bracket Expression ,
above
.Pc .
Outside a bracket expression, a left-parenthesis immediately followed by a
right-parenthesis produces undefined results.
.It Sy \&)
The right-parenthesis is special when matched with a preceding
left-parenthesis, both outside a bracket expression.
.It Sy * + \&? {
The asterisk, plus-sign, question-mark, and left-brace are special except when
used in a bracket expression
.Po see
.Sx RE Bracket Expression ,
above
.Pc .
Any of the following uses produce undefined results:
.Bl -bullet
.It
if these characters appear first in an ERE, or immediately following a
vertical-line, circumflex or left-parenthesis
.It
if a left-brace is not part of a valid interval expression.
.El
.It Sy \&|
The vertical-line is special except when used in a bracket expression
.Po see
.Sx RE Bracket Expression ,
above
.Pc .
A vertical-line appearing first or last in an ERE, or immediately following a
vertical-line or a left-parenthesis, or immediately preceding a
right-parenthesis, produces undefined results.
.It Sy ^
The circumflex is special when used:
.Bl -bullet
.It
as an anchor
.Po see
.Sx ERE Expression Anchoring ,
below
.Pc .
.It
as the first character of a bracket expression
.Po see
.Sx RE Bracket Expression ,
above
.Pc .
.El
.It Sy $
The dollar sign is special when used as an anchor.
.El
.Ss Periods in EREs
A period
.Pq Qq \&. ,
when used outside a bracket expression, is an ERE that matches any character in
the supported character set except NUL.
.Ss ERE Bracket Expression
The rules for ERE Bracket Expressions are the same as for Basic Regular
Expressions; see
.Sx RE Bracket Expression ,
above.
.Ss EREs Matching Multiple Characters
The following rules will be used to construct EREs matching multiple characters
from EREs matching a single character:
.Bl -enum
.It
A
.Em concatenation of EREs
matches the concatenation of the character sequences matched by each component
of the ERE.
A concatenation of EREs enclosed in parentheses matches whatever the
concatenation without the parentheses matches.
For example, both the ERE
.Qq cd
and the ERE
.Qq (cd)
are matched by the third and fourth character of the string
.Qq abcdefabcdef .
.It
When an ERE matching a single character or an ERE enclosed in parentheses is
followed by the special character plus-sign
.Pq Qq + ,
together with that plus-sign it matches what one or more consecutive occurrences
of the ERE would match.
For example, the ERE
.Qq b+(bc)
matches the fourth to seventh characters in the string
.Qq acabbbcde ;
.Qq [ab]+
and
.Qq [ab][ab]*
are equivalent.
.It
When an ERE matching a single character or an ERE enclosed in parentheses is
followed by the special character asterisk
.Pq Qq * ,
together with that asterisk it matches what zero or more consecutive occurrences
of the ERE would match.
For example, the ERE
.Qq b*c
matches the first character in the string
.Qq cabbbcde ,
and the ERE
.Qq b*cd
matches the third to seventh characters in the string
.Qq cabbbcdebbbbbbcdbc .
And,
.Qq [ab]*
and
.Qq [ab][ab]
are equivalent when matching the string
.Qq ab .
.It
When an ERE matching a single character or an ERE enclosed in parentheses is
followed by the special character question-mark
.Pq Qq \&? ,
together with that question-mark it matches what zero or one consecutive
occurrences of the ERE would match.
For example, the ERE
.Qq b?c
matches the second character in the string
.Qq acabbbcde .
.It
When an ERE matching a single character or an ERE enclosed in parentheses is
followed by an
.Em interval expression
of the format
.Qq { Ns Em m Ns } ,
.Qq { Ns Em m Ns ,}
or
.Qq { Ns Em m Ns \&, Ns Em n Ns } ,
together with that interval expression it matches what repeated consecutive
occurrences of the ERE would match.
The values of
.Em m
and
.Em n
will be decimal integers in the range 0 <=
.Em m
<=
.Em n
<=
.Dv RE_DUP_MAX ,
where
.Em m
specifies the exact or minimum number of occurrences and
.Em n
specifies the maximum number of occurrences.
The expression
.Qq { Ns Em m Ns }
matches exactly
.Em m
occurrences of the preceding ERE,
.Qq { Ns Em m Ns ,}
matches at least
.Em m
occurrences and
.Qq { Ns m Ns \&, Ns Em n Ns }
matches any number of occurrences between
.Em m
and
.Em n ,
inclusive.
.El
.Pp
For example, in the string
.Qq abababccccccd
the ERE
.Qq c{3}
is matched by characters seven to nine and the ERE
.Qq (ab){2,}
is matched by characters one to six.
.Pp
The behavior of multiple adjacent duplication symbols
.Po
.Qq + ,
.Qq * ,
.Qq \&?
and intervals
.Pc
produces undefined results.
.Ss ERE Alternation
Two EREs separated by the special character vertical-line
.Pq Qq |
match a string that is matched by either.
For example, the ERE
.Qq a((bc)|d)
matches the string
.Qq abc
and the string
.Qq ad .
Single characters, or expressions matching single characters, separated by the
vertical bar and enclosed in parentheses, will be treated as an ERE matching a
single character.
.Ss ERE Precedence
The order of precedence will be as shown in the following table:
.Bl -column "ERE Precedence (from high to low)" ""
.It Sy ERE Precedence (from high to low) Ta
.It collation-related bracket symbols Ta [= =]  [: :]  [. .]
.It escaped characters Ta \e< Ns Em special character Ns >
.It bracket expression Ta \&[ \&]
.It grouping Ta \&( \&)
.It single-character-ERE duplication Ta * + \&? { Ns Em m Ns \&, Ns Em n Ns}
.It concatenation Ta
.It anchoring Ta ^  $
.It alternation Ta |
.El
.Pp
For example, the ERE
.Qq abba|cde
matches either the string
.Qq abba
or the string
.Qq cde
.Po rather than the string
.Qq abbade
or
.Qq abbcde ,
because concatenation has a higher order of precedence than alternation
.Pc .
.Ss ERE Expression Anchoring
An ERE can be limited to matching strings that begin or end a line; this is
called
.Em anchoring .
The circumflex and dollar sign special characters are considered ERE anchors
when used anywhere outside a bracket expression.
This has the following effects:
.Bl -enum
.It
A circumflex
.Pq Qq ^
outside a bracket expression anchors the expression or subexpression it begins
to the beginning of a string; such an expression or subexpression can match only
a sequence starting at the first character of a string.
For example, the EREs
.Qq ^ab
and
.Qq (^ab)
match
.Qq ab
in the string
.Qq abcdef ,
but fail to match in the string
.Qq cdefab ,
and the ERE
.Qq a^b
is valid, but can never match because the
.Qq a
prevents the expression
.Qq ^b
from matching starting at the first character.
.It
A dollar sign
.Pq Qq $
outside a bracket expression anchors the expression or subexpression it ends to
the end of a string; such an expression or subexpression can match only a
sequence ending at the last character of a string.
For example, the EREs
.Qq ef$
and
.Qq (ef$)
match
.Qq ef
in the string
.Qq abcdef ,
but fail to match in the string
.Qq cdefab ,
and the ERE
.Qq e$f
is valid, but can never match because the
.Qq f
prevents the expression
.Qq e$
from matching ending at the last character.
.El
.Sh SEE ALSO
.Xr localedef 1 ,
.Xr regcomp 3C ,
.Xr attributes 7 ,
.Xr environ 7 ,
.Xr locale 7 ,
.Xr regexp 7