'\" te .\" Copyright (C) 2008, Sun Microsystems, Inc. All Rights Reserved .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] .TH LDAPLIST 1 "May 13, 2017" .SH NAME ldaplist \- search and list naming information from an LDAP directory using the configured profile .SH SYNOPSIS .LP .nf \fB/usr/bin/ldaplist\fR [\fB-dlv\fR] [\fB-h\fR \fILDAP_server\fR[\fB:\fR\fIserverPort\fR] [\fB-M\fR \fIdomainName\fR] [\fB-N\fR \fIprofileName\fR] [\fB-a\fR \fIauthenticationMethod\fR] [\fB-P\fR \fIcertifPath\fR] [\fB-D\fR \fIbindDN\fR] [\fB-w\fR \fIbindPassword\fR] [\fB-j\fR \fIpasswdFile\fR]] [\fIdatabase\fR [\fIkey\fR]...] .fi .LP .nf \fB/usr/bin/ldaplist\fR \fB-g\fR .fi .LP .nf \fB/usr/bin/ldaplist\fR \fB-h\fR .fi .SH DESCRIPTION .LP If the \fB-h\fR \fILDAP_server\fR\fB[:\fR\fIserverPort\fR\fB]\fR option is specified, \fBldaplist\fR establishes a connection to the server pointed to by the option to obtain a \fIDUAProfile\fR specified by the \fB-N\fR option. Then \fBldaplist\fR lists the information from the directory described by the configuration obtained. .sp .LP By default (if the \fB-h\fR \fILDAP_server\fR\fB[:\fR\fIserverPort\fR\fB]\fR option is not specified), the utility searches for and lists the naming information from the LDAP directory service defined in the LDAP configuration files generated by \fBldapclient\fR(1M) during the client initialization phase. To use the utility in the default mode, the Solaris LDAP client must be set up in advance. .sp .LP The database is either a container name or a database name as defined in \fBnsswitch.conf\fR(4). A container is a non-leaf entry in the Directory Information Tree (DIT) that contains naming service information. The container name is the LDAP Relative Distinguished Name (RDN) of the container relative to the \fBdefaultSearchBase\fR as defined in the configuration files. For example, for a container named \fBou=people\fR, the database name is the database specified in \fBnsswitch.conf\fR. This database is mapped to a container, for example, \fBpasswd\fR maps to \fBou=people\fR. If an invalid database is specified, it is mapped to a generic container, for example, \fBnisMapName=name\fR). .sp .LP The key is the attribute value to be searched in the database. You can specify more than one key to be searched in the same database. The key can be specified in either of two forms: \fIattribute\fR=\fIvalue\fR or \fIvalue\fR. In the first case, \fBldaplist\fR passes the search key to the server. In the latter case, an attribute is assigned depending on how the database is specified. If the database is a container name, then the "\fBcn\fR" attribute type is used. If the database is a valid database name as defined in the \fBnsswitch.conf\fR, then a predefined attribute type is used (see table below). If the database is an invalid database name, then \fBcn\fR is used as the attribute type. .sp .LP The \fBldaplist\fR utility relies on the Schema defined in the \fIRFC 2307bis\fR, currently an IETF draft. The data stored on the LDAP server must be stored based on this Schema, unless the profile contains schema mapping definitions. For more information on schema mapping see \fBldapclient\fR(1M). The following table lists the default mapping from the database names to the container, the LDAP object class, and the attribute type used if not defined in the key. .sp .in +2 .nf Database Object Class Attribute Type Container aliases mailGroup cn ou=Aliases automount nisObject cn automountMapName=auto_* bootparams bootableDevice cn ou=Ethers ethers ieee802Device cn ou=Ethers group posixgroup cn ou=Group hosts ipHost cn ou=Hosts ipnodes ipHost cn ou=Hosts netgroup ipNetgroup cn ou=Netgroup netmasks ipNetwork ipnetworknumber ou=Networks networks ipNetwork ipnetworknumber ou=Networks passwd posixAccount uid ou=People protocols ipProtocol cn ou=Protocols publickey nisKeyObject uidnumber ou=People cn ou=Hosts rpc oncRpc cn ou=Rpc services ipService cn ou=Services printers printerService printer-uri ou=printers auth_attr SolarisAuthAttr nameT ou=SolarisAuthAttr prof_attr SolarisProfAttr nameT ou=SolarisProfAttr exec_attr SolarisExecAttr nameT ou=SolarisProfAttr user_attr SolarisUserAttr uidT ou=people projects SolarisProject SolarisProjectID ou=projects .fi .in -2 .sp .sp .LP The following databases are available only if the system is configured with Trusted Extensions: .sp .in +2 .nf tnrhtp ipTnetTemplate ipTnetTemplateName ou=ipTnet tnrhdb ipTnetHost ipTnetNumber ou=ipTnet .fi .in -2 .sp .RS +4 .TP .ie t \(bu .el o For the \fBautomount\fR database, \fBauto_*\fR, in the container column, represents \fBauto_home\fR, \fBauto_direct\fR, \&.\|.\|. .RE .RS +4 .TP .ie t \(bu .el o For the \fBpublickey\fR database, if the key starts with a digit, it is interpreted as an uid number. If the key starts with a non-digit, it is interpreted as a host name. .RE .sp .LP The \fBldaplist\fR utility supports substring search by using the wildcard "\fB*\fR" in the key. For example, "\fBmy*\fR" matches any strings that starts with "\fBmy\fR". In some shell environments, keys containing the wildcard might need to be quoted. .sp .LP If the key is not specified, all the containers in the current search \fBbaseDN\fR is listed. .SH OPTIONS .LP The following options are supported: .sp .ne 2 .na \fB\fB-a\fR \fIauthenticationMethod\fR\fR .ad .sp .6 .RS 4n Specifies the authentication method. The default value is what has been configured in the profile. The supported authentication methods are: .sp .in +2 .nf simple sasl/CRAM-MD5 sasl/DIGEST-MD5 tls:simple tls:sasl/CRAM-MD5 tls:sasl/DIGEST-MD5 .fi .in -2 .sp Selecting \fBsimple\fR causes passwords to be sent over the network in clear text. Its use is strongly discouraged. .sp Additionally, if the client is configured with a profile which uses no authentication, that is, either the \fIcredentialLevel\fR attribute is set to \fBanonymous\fR or \fIauthenticationMethod\fR is set to \fBnone\fR, the user must use this option to provide an authentication method. .RE .sp .ne 2 .na \fB\fB-d\fR\fR .ad .sp .6 .RS 4n Lists the attributes for the specified database, rather than the entries. By default, the entries are listed. .RE .sp .ne 2 .na \fB\fB-D\fR \fIbindDN\fR\fR .ad .sp .6 .RS 4n Specifies an entry which has read permission to the requested database. .RE .sp .ne 2 .na \fB\fB-g\fR\fR .ad .sp .6 .RS 4n Lists the database mapping. .RE .sp .ne 2 .na \fB\fB-h\fR\fR .ad .sp .6 .RS 4n Lists the database mapping. .sp This option has been deprecated. .RE .sp .ne 2 .na \fB\fB-h\fR \fILDAP_server[:serverPort]\fR\fR .ad .sp .6 .RS 4n Specifies an address (or a name) and a port of the LDAP server from which the entries are read. The current naming service specified in the \fBnsswitch.conf\fR file is used. The default value for the port is \fB389\fR, unless when TLS is specified in the authentication method. In this case, the default LDAP server port number is \fB636\fR. .RE .sp .ne 2 .na \fB\fB-j\fR \fIpasswdFile\fR\fR .ad .sp .6 .RS 4n Specifies a file containing the password for the bind DN or the password for the SSL client's key database. To protect the password, use this option in scripts and place the password in a secure file. .sp This option is mutually exclusive of the \fB-w\fR option. .RE .sp .ne 2 .na \fB\fB-l\fR\fR .ad .sp .6 .RS 4n Lists all the attributes for each entry matching the search criteria. By default, \fBldaplist\fR lists only the Distinguished Name of the entries found. .RE .sp .ne 2 .na \fB\fB-M\fR \fIdomainName\fR\fR .ad .sp .6 .RS 4n Specifies the name of a domain served by the specified server. If this option is not specified, the default domain name is used. .RE .sp .ne 2 .na \fB\fB-N\fR \fIprofileName\fR\fR .ad .sp .6 .RS 4n Specifies a DUAProfile name. A profile with such a name is supposed to exist on the server specified by \fB-H\fR option. The default value is default. .RE .sp .ne 2 .na \fB\fB-p\fR \fIcertifPath\fR\fR .ad .sp .6 .RS 4n Specifies the certificate path to the location of the certificate database. The value is the path where security database files reside. This is used for TLS support, which is specified in the \fIauthenticationMethod\fR and \fIserviceAuthenticationMethod\fR attributes. The default is \fB/var/ldap\fR. .RE .sp .ne 2 .na \fB\fB-w\fR \fIbindPassword\fR\fR .ad .sp .6 .RS 4n Password to be used for authenticating the \fIbindDN\fR. If this parameter is missing, the command prompts for a password. NULL passwords are not supported in LDAP. .sp When you use \fB-w\fR \fIbind_password\fR to specify the password to be used for authentication, the password is visible to other users of the system by means of the \fBps\fR command, in script files or in shell history. .sp If the value of \fB-\fR is supplied as a password, the command prompts for a password. .RE .sp .ne 2 .na \fB\fB-v\fR\fR .ad .sp .6 .RS 4n Sets verbose mode. The \fBldaplist\fR utility also prints the filter used to search for the entry. The filter is prefixed with "\fB+++\fR". .RE .SH EXAMPLES .LP \fBExample 1 \fRListing All Entries in the Hosts Database .sp .LP The following example lists all entries in the \fBhosts\fR database: .sp .in +2 .nf example% \fBldaplist hosts\fR .fi .in -2 .sp .LP \fBExample 2 \fRListing All Entries in a Non-Standard Database \fBou=new\fR .sp .LP The following example lists all entries in a non-standard database: .sp .in +2 .nf example% \fBldaplist ou=new\fR .fi .in -2 .sp .LP \fBExample 3 \fRFinding \fBuser1\fR in the \fBpasswd\fR Database .sp .LP The following example finds \fBuser1\fR in the \fBpasswd\fR database: .sp .in +2 .nf example% \fBldaplist passwd user1\fR .fi .in -2 .sp .LP \fBExample 4 \fRFinding the Entry With Service Port of \fB4045\fR in the \fBservices\fR Database .sp .LP The following example finds the entry with the service port of \fB4045\fR in the \fBservices\fR database: .sp .in +2 .nf example% \fBldaplist services ipServicePort=4045\fR .fi .in -2 .sp .LP \fBExample 5 \fRFinding All Users With Username Starting with \fBnew\fR in the \fBpasswd\fR Database .sp .LP The following example finds all users with the username starting with \fBnew\fR in the \fBpasswd\fR database: .sp .in +2 .nf example% \fBldaplist passwd 'new*'\fR .fi .in -2 .sp .LP \fBExample 6 \fRListing the Attributes for the \fBhosts\fR Database .sp .LP The following example lists the attributes for the \fBhosts\fR database: .sp .in +2 .nf example% \fBldaplist -d hosts\fR .fi .in -2 .sp .LP \fBExample 7 \fRFinding \fBuser1\fR in the \fBpasswd\fR Database .sp .LP The following example finds \fBuser1\fR in the \fBpasswd\fR database. An LDAP server is specified explicitly. .sp .in +2 .nf example% \fBldaplist -H 10.10.10.10:3890 \e -M another.domain.name -N special_duaprofile \e -D "cn=directory manager" -w secret \e user1\fR .fi .in -2 .sp .SH EXIT STATUS .LP The following exit values are returned: .sp .ne 2 .na \fB\fB0\fR\fR .ad .RS 5n Successfully matched some entries. .RE .sp .ne 2 .na \fB\fB1\fR\fR .ad .RS 5n Successfully searched the table and no matches were found. .RE .sp .ne 2 .na \fB\fB2\fR\fR .ad .RS 5n An error occurred. An error message is output. .RE .SH FILES .ne 2 .na \fB\fB/var/ldap/ldap_client_file\fR\fR .ad .br .na \fB\fB/var/ldap/ldap_client_cred\fR\fR .ad .RS 30n Files that contain the LDAP configuration of the client. Do not manually modify these files. Their content is not guaranteed to be human readable. To update these files, use \fBldapclient\fR(1M) .RE .SH ATTRIBUTES .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp .sp .TS box; c | c l | l . ATTRIBUTE TYPE ATTRIBUTE VALUE _ Interface Stability Committed .TE .SH SEE ALSO .LP \fBldap\fR(1), \fBldapadd\fR(1), \fBldapdelete\fR(1), \fBldapmodify\fR(1), \fBldapmodrdn\fR(1), \fBldapsearch\fR(1), \fBidsconfig\fR(1M), \fBldap_cachemgr\fR(1M), \fBldapaddent\fR(1M), \fBldapclient\fR(1M), \fBresolv.conf\fR(4), \fBattributes\fR(5) .SH NOTES .LP \fIRFC 2307bis\fR is an IETF informational document in draft stage that defines an approach for using \fBLDAP\fR as a naming service. .sp .LP Currently StartTLS is not supported by \fBlibldap.so.5\fR, therefore the port number provided refers to the port used during a TLS open, versus the port used as part of a StartTLS sequence. For example, \fB-h foo:1000 -a tls:simple\fR, refers to a raw TLS open on host \fBfoo\fR, port 1000, not a open, StartTLS sequence on an unsecured port 1000. If port 1000 is unsecured the connection is not made.