/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #include #include #include #include #include #include #include /* * Get the preferred minor node for the given path. * ":n" for tapes, ":c,raw" for disks, * and ":0" for enclosures. */ static void get_minor(char *devpath, char *minor) { const char ROUTINE[] = "get_minor"; char fullpath[MAXPATHLEN]; int fd; if ((strstr(devpath, "/st@")) || (strstr(devpath, "/tape@"))) { (void) strcpy(minor, ":n"); } else if (strstr(devpath, "/smp@")) { (void) strcpy(minor, ":smp"); } else if ((strstr(devpath, "/ssd@")) || (strstr(devpath, "/sd@")) || (strstr(devpath, "/disk@"))) { (void) strcpy(minor, ":c,raw"); } else if ((strstr(devpath, "/ses@")) || (strstr(devpath, "/enclosure@"))) { (void) snprintf(fullpath, MAXPATHLEN, "%s%s%s", DEVICES_DIR, devpath, ":0"); /* reset errno to 0 */ errno = 0; if ((fd = open(fullpath, O_RDONLY)) == -1) { /* * :0 minor doesn't exist. assume bound to sgen driver * and :ses minor exist. */ if (errno == ENOENT) { (void) strcpy(minor, ":ses"); } } else { (void) strcpy(minor, ":0"); (void) close(fd); } } else { log(LOG_DEBUG, ROUTINE, "Unrecognized target (%s)", devpath); minor[0] = '\0'; } } /* * Free the attached port allocation. */ static void free_attached_port(struct sun_sas_port *port_ptr) { struct sun_sas_port *tgt_port, *last_tgt_port; struct ScsiEntryList *scsi_info = NULL, *last_scsi_info = NULL; tgt_port = port_ptr->first_attached_port; while (tgt_port != NULL) { /* Free target mapping data list first. */ scsi_info = tgt_port->scsiInfo; while (scsi_info != NULL) { last_scsi_info = scsi_info; scsi_info = scsi_info->next; free(last_scsi_info); } last_tgt_port = tgt_port; tgt_port = tgt_port->next; free(last_tgt_port->port_attributes.\ PortSpecificAttribute.SASPort); free(last_tgt_port); } port_ptr->first_attached_port = NULL; port_ptr->port_attributes.PortSpecificAttribute.\ SASPort->NumberofDiscoveredPorts = 0; } /* * Fill domainPortWWN. * should be called after completing discovered port discovery. */ void fillDomainPortWWN(struct sun_sas_port *port_ptr) { const char ROUTINE[] = "fillDomainPortWWN"; struct sun_sas_port *disco_port_ptr; struct phy_info *phy_ptr; uint64_t domainPort = 0; struct ScsiEntryList *mapping_ptr; for (disco_port_ptr = port_ptr->first_attached_port; disco_port_ptr != NULL; disco_port_ptr = disco_port_ptr->next) { if (disco_port_ptr->port_attributes.PortType == HBA_PORTTYPE_SASEXPANDER && wwnConversion(disco_port_ptr->port_attributes. PortSpecificAttribute.SASPort-> AttachedSASAddress.wwn) == wwnConversion(port_ptr->port_attributes. PortSpecificAttribute.SASPort-> LocalSASAddress.wwn)) { (void) memcpy(&domainPort, disco_port_ptr->port_attributes. PortSpecificAttribute. SASPort->LocalSASAddress.wwn, 8); break; } } if (domainPort == 0) { if (port_ptr->first_attached_port) { /* * there is no expander device attached on an HBA port * domainPortWWN should not stay to 0 since multiple * hba ports can have the same LocalSASAddres within * the same HBA. * Set the SAS address of direct attached target. */ if (wwnConversion(port_ptr->port_attributes. PortSpecificAttribute.SASPort-> LocalSASAddress.wwn) == wwnConversion(port_ptr->first_attached_port-> port_attributes.PortSpecificAttribute. SASPort->AttachedSASAddress.wwn)) { (void) memcpy(&domainPort, port_ptr->first_attached_port-> port_attributes.PortSpecificAttribute. SASPort->LocalSASAddress.wwn, 8); } else { /* * SAS address is not upstream connected. * domainPortWWN stays as 0. */ log(LOG_DEBUG, ROUTINE, "DomainPortWWN is not set. " "Device(s) are visible on the HBA port " "but there is no expander or directly " "attached port with matching upsteam " "attached SAS address for " "HBA port (Local SAS Address: %016llx).", wwnConversion(port_ptr->port_attributes. PortSpecificAttribute. SASPort->LocalSASAddress.wwn)); return; } } else { /* * There existss an iport without properly configured * child smp ndoes or child node or pathinfo. * domainPortWWN stays as 0. */ log(LOG_DEBUG, ROUTINE, "DomainPortWWN is not set. No properly " "configured smp or directly attached port " "found on HBA port(Local SAS Address: %016llx).", wwnConversion(port_ptr->port_attributes. PortSpecificAttribute. SASPort->LocalSASAddress.wwn)); return; } } /* fill up phy info */ for (phy_ptr = port_ptr->first_phy; phy_ptr != NULL; phy_ptr = phy_ptr->next) { (void) memcpy(phy_ptr->phy.domainPortWWN.wwn, &domainPort, 8); } /* fill up target mapping */ for (disco_port_ptr = port_ptr->first_attached_port; disco_port_ptr != NULL; disco_port_ptr = disco_port_ptr->next) { for (mapping_ptr = disco_port_ptr->scsiInfo; mapping_ptr != NULL; mapping_ptr = mapping_ptr->next) { (void) memcpy(mapping_ptr->entry.PortLun. domainPortWWN.wwn, &domainPort, 8); } } } /* * Finds attached device(target) from devinfo node. */ static HBA_STATUS get_attached_devices_info(di_node_t node, struct sun_sas_port *port_ptr) { const char ROUTINE[] = "get_attached_devices_info"; char *propStringData = NULL; int *propIntData = NULL; int64_t *propInt64Data = NULL; scsi_lun_t samLun; ddi_devid_t devid; char *guidStr; char *unit_address; char *charptr; char *devpath, link[MAXNAMELEN]; char fullpath[MAXPATHLEN+1]; char minorname[MAXNAMELEN+1]; struct ScsiEntryList *mapping_ptr; HBA_WWN SASAddress, AttachedSASAddress; struct sun_sas_port *disco_port_ptr; uint_t state = 0; int portfound, rval, size; int port_state = HBA_PORTSTATE_ONLINE; uint64_t tmpAddr; if (port_ptr == NULL) { log(LOG_DEBUG, ROUTINE, "NULL port_ptr argument"); return (HBA_STATUS_ERROR); } if ((devpath = di_devfs_path(node)) == NULL) { log(LOG_DEBUG, ROUTINE, "Device in device tree has no path. Skipping."); return (HBA_STATUS_ERROR); } if ((di_instance(node) == -1) || di_retired(node)) { log(LOG_DEBUG, ROUTINE, "dev node (%s) returned instance of -1 or is retired. " " Skipping.", devpath); di_devfs_path_free(devpath); return (HBA_STATUS_OK); } state = di_state(node); /* when node is not attached and online, set the state to offline. */ if (((state & DI_DRIVER_DETACHED) == DI_DRIVER_DETACHED) || ((state & DI_DEVICE_OFFLINE) == DI_DEVICE_OFFLINE)) { log(LOG_DEBUG, ROUTINE, "dev node (%s) is either OFFLINE or DETACHED", devpath); port_state = HBA_PORTSTATE_OFFLINE; } /* add the "/devices" in the begining at the end */ (void) snprintf(fullpath, sizeof (fullpath), "%s%s", DEVICES_DIR, devpath); (void) memset(&SASAddress, 0, sizeof (SASAddress)); if ((unit_address = di_bus_addr(node)) != NULL) { if ((charptr = strchr(unit_address, ',')) != NULL) { *charptr = '\0'; } for (charptr = unit_address; *charptr != '\0'; charptr++) { if (isxdigit(*charptr)) { break; } } if (*charptr != '\0') { tmpAddr = htonll(strtoll(charptr, NULL, 16)); (void) memcpy(&SASAddress.wwn[0], &tmpAddr, 8); } else { log(LOG_DEBUG, ROUTINE, "No proper target port info on unit address of %s", fullpath); di_devfs_path_free(devpath); return (HBA_STATUS_ERROR); } } else { log(LOG_DEBUG, ROUTINE, "Fail to get unit address of %s.", fullpath); di_devfs_path_free(devpath); return (HBA_STATUS_ERROR); } (void) memset(&AttachedSASAddress, 0, sizeof (AttachedSASAddress)); if (di_prop_lookup_strings(DDI_DEV_T_ANY, node, "attached-port", &propStringData) != -1) { for (charptr = propStringData; *charptr != '\0'; charptr++) { if (isxdigit(*charptr)) { break; } } if (*charptr != '\0') { tmpAddr = htonll(strtoll(charptr, NULL, 16)); (void) memcpy(AttachedSASAddress.wwn, &tmpAddr, 8); /* check the attached address of hba port. */ if (memcmp(port_ptr->port_attributes. PortSpecificAttribute.SASPort->LocalSASAddress.wwn, &tmpAddr, 8) == 0) { /* * When attached-port is set from iport * attached-port prop, we do the cross check * with device's own SAS address. * * If not set, we store device's own SAS * address to iport attached SAS address. */ if (wwnConversion(port_ptr->port_attributes. PortSpecificAttribute.SASPort-> AttachedSASAddress.wwn)) { /* verify the Attaached SAS Addr. */ if (memcmp(port_ptr->port_attributes. PortSpecificAttribute.SASPort-> AttachedSASAddress.wwn, SASAddress.wwn, 8) != 0) { /* indentation move begin. */ log(LOG_DEBUG, ROUTINE, "iport attached-port(%016llx) do not" " match with level 1 Local" " SAS address(%016llx).", wwnConversion(port_ptr->port_attributes. PortSpecificAttribute. SASPort->AttachedSASAddress.wwn), wwnConversion(SASAddress.wwn)); di_devfs_path_free(devpath); free_attached_port(port_ptr); return (HBA_STATUS_ERROR); /* indentation move ends. */ } } else { (void) memcpy(port_ptr->port_attributes. PortSpecificAttribute. SASPort->AttachedSASAddress.wwn, &SASAddress.wwn[0], 8); } } } else { log(LOG_DEBUG, ROUTINE, "No proper attached SAS address value on device %s", fullpath); di_devfs_path_free(devpath); free_attached_port(port_ptr); return (HBA_STATUS_ERROR); } } else { log(LOG_DEBUG, ROUTINE, "Property AttachedSASAddress not found for device \"%s\"", fullpath); di_devfs_path_free(devpath); free_attached_port(port_ptr); return (HBA_STATUS_ERROR); } /* * walk the disco list to make sure that there isn't a matching * port and node wwn or a matching device path */ portfound = 0; for (disco_port_ptr = port_ptr->first_attached_port; disco_port_ptr != NULL; disco_port_ptr = disco_port_ptr->next) { if ((disco_port_ptr->port_attributes.PortState != HBA_PORTSTATE_ERROR) && (memcmp(disco_port_ptr-> port_attributes.PortSpecificAttribute. SASPort->LocalSASAddress.wwn, SASAddress.wwn, 8) == 0)) { /* * found matching disco_port * look for matching device path */ portfound = 1; for (mapping_ptr = disco_port_ptr->scsiInfo; mapping_ptr != NULL; mapping_ptr = mapping_ptr->next) { if (strstr(mapping_ptr-> entry.ScsiId. OSDeviceName, devpath) != 0) { log(LOG_DEBUG, ROUTINE, "Found an already discovered " "device %s.", fullpath); di_devfs_path_free(devpath); return (HBA_STATUS_OK); } } if (portfound == 1) { break; } } } if (portfound == 0) { /* * there are no matching SAS address. * this must be a new device */ if ((disco_port_ptr = (struct sun_sas_port *)calloc(1, sizeof (struct sun_sas_port))) == NULL) { OUT_OF_MEMORY(ROUTINE); di_devfs_path_free(devpath); free_attached_port(port_ptr); return (HBA_STATUS_ERROR); } if ((disco_port_ptr->port_attributes.PortSpecificAttribute.\ SASPort = (struct SMHBA_SAS_Port *)calloc(1, sizeof (struct SMHBA_SAS_Port))) == NULL) { OUT_OF_MEMORY("add_hba_port_info"); di_devfs_path_free(devpath); free_attached_port(port_ptr); return (HBA_STATUS_ERROR); } (void) memcpy(disco_port_ptr->port_attributes. PortSpecificAttribute.SASPort->LocalSASAddress.wwn, SASAddress.wwn, 8); (void) memcpy(disco_port_ptr->port_attributes. PortSpecificAttribute.SASPort->AttachedSASAddress.wwn, AttachedSASAddress.wwn, 8); /* Default to unknown until we figure out otherwise */ rval = di_prop_lookup_strings(DDI_DEV_T_ANY, node, "variant", &propStringData); if (rval < 0) { /* check if it is SMP target */ charptr = di_driver_name(node); if (charptr != NULL && (strncmp(charptr, "smp", strlen(charptr)) == 0)) { disco_port_ptr->port_attributes.PortType = HBA_PORTTYPE_SASEXPANDER; disco_port_ptr->port_attributes. PortSpecificAttribute. SASPort->PortProtocol = HBA_SASPORTPROTOCOL_SMP; if (lookupSMPLink(devpath, (char *)link) == HBA_STATUS_OK) { /* indentation changed here. */ (void) strlcpy(disco_port_ptr->port_attributes. OSDeviceName, link, sizeof (disco_port_ptr->port_attributes.OSDeviceName)); /* indentation change ends here. */ } else { /* indentation changed here. */ get_minor(devpath, minorname); (void) snprintf(fullpath, sizeof (fullpath), "%s%s%s", DEVICES_DIR, devpath, minorname); (void) strlcpy(disco_port_ptr->port_attributes. OSDeviceName, fullpath, sizeof (disco_port_ptr->port_attributes.OSDeviceName)); /* indentation change ends here. */ } } else { disco_port_ptr->port_attributes.PortType = HBA_PORTTYPE_SASDEVICE; disco_port_ptr->port_attributes.\ PortSpecificAttribute.\ SASPort->PortProtocol = HBA_SASPORTPROTOCOL_SSP; } } else { if ((strcmp(propStringData, "sata") == 0) || (strcmp(propStringData, "atapi") == 0)) { disco_port_ptr->port_attributes.PortType = HBA_PORTTYPE_SATADEVICE; disco_port_ptr->port_attributes.\ PortSpecificAttribute.SASPort->PortProtocol = HBA_SASPORTPROTOCOL_SATA; } else { log(LOG_DEBUG, ROUTINE, "Unexpected variant prop value %s found on", " device %s", propStringData, fullpath); /* * Port type will be 0 * which is not valid type. */ } } /* SMP device was handled already */ if (disco_port_ptr->port_attributes.OSDeviceName[0] == '\0') { /* indentation change due to ctysle check on sizeof. */ size = sizeof (disco_port_ptr->port_attributes.OSDeviceName); (void) strlcpy(disco_port_ptr->port_attributes. OSDeviceName, fullpath, size); } /* add new discovered port into the list */ if (port_ptr->first_attached_port == NULL) { port_ptr->first_attached_port = disco_port_ptr; disco_port_ptr->index = 0; port_ptr->port_attributes.PortSpecificAttribute.\ SASPort->NumberofDiscoveredPorts = 1; } else { disco_port_ptr->next = port_ptr->first_attached_port; port_ptr->first_attached_port = disco_port_ptr; disco_port_ptr->index = port_ptr->port_attributes.\ PortSpecificAttribute.\ SASPort->NumberofDiscoveredPorts; port_ptr->port_attributes.PortSpecificAttribute.\ SASPort->NumberofDiscoveredPorts++; } disco_port_ptr->port_attributes.PortState = port_state; } if (disco_port_ptr->port_attributes.PortType == HBA_PORTTYPE_SASEXPANDER) { /* No mapping data for expander device. return ok here. */ di_devfs_path_free(devpath); return (HBA_STATUS_OK); } if ((mapping_ptr = (struct ScsiEntryList *)calloc (1, sizeof (struct ScsiEntryList))) == NULL) { OUT_OF_MEMORY(ROUTINE); di_devfs_path_free(devpath); free_attached_port(port_ptr); return (HBA_STATUS_ERROR); } if (di_prop_lookup_ints(DDI_DEV_T_ANY, node, "lun", &propIntData) != -1) { mapping_ptr->entry.ScsiId.ScsiOSLun = *propIntData; } else { if ((charptr = strchr(unit_address, ',')) != NULL) { charptr++; mapping_ptr->entry.ScsiId.ScsiOSLun = strtoull(charptr, NULL, 10); } else { log(LOG_DEBUG, ROUTINE, "Failed to get LUN from the unit address of device " " %s.", fullpath); di_devfs_path_free(devpath); free_attached_port(port_ptr); return (HBA_STATUS_ERROR); } } /* get TargetLun(SAM-LUN). */ if (di_prop_lookup_int64(DDI_DEV_T_ANY, node, "lun64", &propInt64Data) != -1) { samLun = scsi_lun64_to_lun(*propInt64Data); (void) memcpy(&mapping_ptr->entry.PortLun.TargetLun, &samLun, 8); } else { log(LOG_DEBUG, "get_attached_devices_info", "No lun64 prop found on device %s.", fullpath); di_devfs_path_free(devpath); free_attached_port(port_ptr); return (HBA_STATUS_ERROR); } if (di_prop_lookup_ints(DDI_DEV_T_ANY, node, "target", &propIntData) != -1) { mapping_ptr->entry.ScsiId.ScsiTargetNumber = *propIntData; } else { mapping_ptr->entry.ScsiId.ScsiTargetNumber = di_instance(node); } /* get ScsiBusNumber */ mapping_ptr->entry.ScsiId.ScsiBusNumber = port_ptr->cntlNumber; (void) memcpy(mapping_ptr->entry.PortLun.PortWWN.wwn, SASAddress.wwn, 8); /* Store the devices path for now. We'll convert to /dev later */ get_minor(devpath, minorname); (void) snprintf(mapping_ptr->entry.ScsiId.OSDeviceName, sizeof (mapping_ptr->entry.ScsiId.OSDeviceName), "%s%s%s", DEVICES_DIR, devpath, minorname); /* reset errno to 0 */ errno = 0; if (di_prop_lookup_strings(DDI_DEV_T_ANY, node, "devid", &propStringData) != -1) { if (devid_str_decode(propStringData, &devid, NULL) != -1) { guidStr = devid_to_guid(devid); if (guidStr != NULL) { (void) strlcpy(mapping_ptr->entry.LUID.buffer, guidStr, 256); devid_free_guid(guidStr); } else { /* * Note: * if logical unit associated page 83 id * descriptor is not avaialble for the device * devid_to_guid returns NULl with errno 0. */ log(LOG_DEBUG, ROUTINE, "failed to get devid guid on (%s) : %s", devpath, strerror(errno)); } } else { /* * device may not support proper page 83 id descriptor. * leave LUID attribute to NULL and continue. */ log(LOG_DEBUG, ROUTINE, "failed to decode devid prop on (%s) : %s", devpath, strerror(errno)); } } else { /* leave LUID attribute to NULL and continue. */ log(LOG_DEBUG, ROUTINE, "failed to get devid prop on (%s) : %s", devpath, strerror(errno)); } if (disco_port_ptr->scsiInfo == NULL) { disco_port_ptr->scsiInfo = mapping_ptr; } else { mapping_ptr->next = disco_port_ptr->scsiInfo; disco_port_ptr->scsiInfo = mapping_ptr; } di_devfs_path_free(devpath); return (HBA_STATUS_OK); } /* * Finds attached device(target) from pathinfo node. */ static HBA_STATUS get_attached_paths_info(di_path_t path, struct sun_sas_port *port_ptr) { char ROUTINE[] = "get_attached_paths_info"; char *propStringData = NULL; int *propIntData = NULL; int64_t *propInt64Data = NULL; scsi_lun_t samLun; ddi_devid_t devid; char *guidStr; char *unit_address; char *charptr; char *clientdevpath = NULL; char *pathdevpath = NULL; char fullpath[MAXPATHLEN+1]; char minorname[MAXNAMELEN+1]; struct ScsiEntryList *mapping_ptr; HBA_WWN SASAddress, AttachedSASAddress; struct sun_sas_port *disco_port_ptr; di_path_state_t state = 0; di_node_t clientnode; int portfound, size; int port_state = HBA_PORTSTATE_ONLINE; uint64_t tmpAddr; if (port_ptr == NULL) { log(LOG_DEBUG, ROUTINE, "NULL port_ptr argument"); return (HBA_STATUS_ERROR); } /* if not null, free before return. */ pathdevpath = di_path_devfs_path(path); state = di_path_state(path); /* when node is not attached and online, set the state to offline. */ if ((state == DI_PATH_STATE_OFFLINE) || (state == DI_PATH_STATE_FAULT)) { log(LOG_DEBUG, ROUTINE, "path node (%s) is either OFFLINE or FAULT state", pathdevpath ? pathdevpath : "(missing device path)"); port_state = HBA_PORTSTATE_OFFLINE; } if (clientnode = di_path_client_node(path)) { if (di_retired(clientnode)) { log(LOG_DEBUG, ROUTINE, "client node of path (%s) is retired. Skipping.", pathdevpath ? pathdevpath : "(missing device path)"); if (pathdevpath) di_devfs_path_free(pathdevpath); return (HBA_STATUS_OK); } if ((clientdevpath = di_devfs_path(clientnode)) == NULL) { log(LOG_DEBUG, ROUTINE, "Client device of path (%s) has no path. Skipping.", pathdevpath ? pathdevpath : "(missing device path)"); if (pathdevpath) di_devfs_path_free(pathdevpath); return (HBA_STATUS_ERROR); } } else { log(LOG_DEBUG, ROUTINE, "Failed to get client device from a path (%s).", pathdevpath ? pathdevpath : "(missing device path)"); if (pathdevpath) di_devfs_path_free(pathdevpath); return (HBA_STATUS_ERROR); } /* add the "/devices" in the begining and the :devctl at the end */ (void) snprintf(fullpath, sizeof (fullpath), "%s%s", DEVICES_DIR, clientdevpath); (void) memset(&SASAddress, 0, sizeof (SASAddress)); if ((unit_address = di_path_bus_addr(path)) != NULL) { if ((charptr = strchr(unit_address, ',')) != NULL) { *charptr = '\0'; } for (charptr = unit_address; *charptr != '\0'; charptr++) { if (isxdigit(*charptr)) { break; } } if (charptr != '\0') { tmpAddr = htonll(strtoll(charptr, NULL, 16)); (void) memcpy(&SASAddress.wwn[0], &tmpAddr, 8); } else { log(LOG_DEBUG, ROUTINE, "No proper target port info on unit address of " "path (%s).", pathdevpath ? pathdevpath : "(missing device path)"); if (pathdevpath) di_devfs_path_free(pathdevpath); di_devfs_path_free(clientdevpath); return (HBA_STATUS_ERROR); } } else { log(LOG_DEBUG, ROUTINE, "Fail to get unit address of path(%s).", "path (%s).", pathdevpath ? pathdevpath : "(missing device path)"); if (pathdevpath) di_devfs_path_free(pathdevpath); di_devfs_path_free(clientdevpath); return (HBA_STATUS_ERROR); } (void) memset(&AttachedSASAddress, 0, sizeof (AttachedSASAddress)); if (di_path_prop_lookup_strings(path, "attached-port", &propStringData) != -1) { for (charptr = propStringData; *charptr != '\0'; charptr++) { if (isxdigit(*charptr)) { break; } } if (*charptr != '\0') { tmpAddr = htonll(strtoll(charptr, NULL, 16)); (void) memcpy(AttachedSASAddress.wwn, &tmpAddr, 8); /* check the attached address of hba port. */ if (memcmp(port_ptr->port_attributes. PortSpecificAttribute.SASPort-> LocalSASAddress.wwn, &tmpAddr, 8) == 0) { if (wwnConversion(port_ptr->port_attributes. PortSpecificAttribute.SASPort-> AttachedSASAddress.wwn)) { /* verify the attaached SAS Addr. */ if (memcmp(port_ptr->port_attributes. PortSpecificAttribute.SASPort-> AttachedSASAddress.wwn, SASAddress.wwn, 8) != 0) { /* indentation move begin. */ log(LOG_DEBUG, ROUTINE, "iport attached-port(%016llx) do not" " match with level 1 Local" " SAS address(%016llx).", wwnConversion(port_ptr->port_attributes. PortSpecificAttribute. SASPort->AttachedSASAddress.wwn), wwnConversion(SASAddress.wwn)); if (pathdevpath) di_devfs_path_free(pathdevpath); di_devfs_path_free(clientdevpath); free_attached_port(port_ptr); return (HBA_STATUS_ERROR); /* indentation move ends. */ } } else { /* store the Attaached SAS Addr. */ (void) memcpy(port_ptr->port_attributes. PortSpecificAttribute. SASPort->AttachedSASAddress.wwn, &SASAddress.wwn[0], 8); } } } else { log(LOG_DEBUG, ROUTINE, "No proper attached SAS address value of path (%s)", pathdevpath ? pathdevpath : "(missing device path)"); if (pathdevpath) di_devfs_path_free(pathdevpath); di_devfs_path_free(clientdevpath); free_attached_port(port_ptr); return (HBA_STATUS_ERROR); } } else { log(LOG_DEBUG, ROUTINE, "Property attached-port not found for path (%s)", pathdevpath ? pathdevpath : "(missing device path)"); if (pathdevpath) di_devfs_path_free(pathdevpath); di_devfs_path_free(clientdevpath); free_attached_port(port_ptr); return (HBA_STATUS_ERROR); } /* * walk the disco list to make sure that there isn't a matching * port and node wwn or a matching device path */ portfound = 0; for (disco_port_ptr = port_ptr->first_attached_port; disco_port_ptr != NULL; disco_port_ptr = disco_port_ptr->next) { if ((disco_port_ptr->port_attributes.PortState != HBA_PORTSTATE_ERROR) && (memcmp(disco_port_ptr->port_attributes. PortSpecificAttribute.SASPort->LocalSASAddress.wwn, SASAddress.wwn, 8) == 0)) { /* * found matching disco_port * look for matching device path */ portfound = 1; for (mapping_ptr = disco_port_ptr->scsiInfo; mapping_ptr != NULL; mapping_ptr = mapping_ptr->next) { if (strstr(mapping_ptr-> entry.ScsiId. OSDeviceName, clientdevpath) != 0) { log(LOG_DEBUG, ROUTINE, "Found an already discovered " "device %s.", clientdevpath); if (pathdevpath) di_devfs_path_free(pathdevpath); di_devfs_path_free(clientdevpath); return (HBA_STATUS_OK); } } if (portfound == 1) { break; } } } if (portfound == 0) { /* * there are no matching SAS address. * this must be a new device */ if ((disco_port_ptr = (struct sun_sas_port *)calloc(1, sizeof (struct sun_sas_port))) == NULL) { OUT_OF_MEMORY(ROUTINE); if (pathdevpath) di_devfs_path_free(pathdevpath); di_devfs_path_free(clientdevpath); free_attached_port(port_ptr); return (HBA_STATUS_ERROR); } if ((disco_port_ptr->port_attributes.PortSpecificAttribute.\ SASPort = (struct SMHBA_SAS_Port *)calloc(1, sizeof (struct SMHBA_SAS_Port))) == NULL) { OUT_OF_MEMORY("add_hba_port_info"); if (pathdevpath) di_devfs_path_free(pathdevpath); di_devfs_path_free(clientdevpath); free_attached_port(port_ptr); return (HBA_STATUS_ERROR); } (void) memcpy(disco_port_ptr->port_attributes. PortSpecificAttribute. SASPort->LocalSASAddress.wwn, SASAddress.wwn, 8); (void) memcpy(disco_port_ptr->port_attributes. PortSpecificAttribute. SASPort->AttachedSASAddress.wwn, AttachedSASAddress.wwn, 8); /* Default to unknown until we figure out otherwise */ if (di_path_prop_lookup_strings(path, "variant", &propStringData) != -1) { if ((strcmp(propStringData, "sata") == 0) || (strcmp(propStringData, "atapi") == 0)) { disco_port_ptr->port_attributes.PortType = HBA_PORTTYPE_SATADEVICE; disco_port_ptr->port_attributes.\ PortSpecificAttribute.SASPort->PortProtocol = HBA_SASPORTPROTOCOL_SATA; } else { log(LOG_DEBUG, ROUTINE, "Unexpected variant prop value %s found on", " path (%s)", propStringData, pathdevpath ? pathdevpath : "(missing device path)"); /* * Port type will be 0 * which is not valid type. */ } } else { disco_port_ptr->port_attributes.PortType = HBA_PORTTYPE_SASDEVICE; disco_port_ptr->port_attributes.PortSpecificAttribute.\ SASPort->PortProtocol = HBA_SASPORTPROTOCOL_SSP; } if (disco_port_ptr->port_attributes.OSDeviceName[0] == '\0') { /* indentation change due to ctysle check on sizeof. */ size = sizeof (disco_port_ptr->port_attributes.OSDeviceName); if (pathdevpath != NULL) { (void) strlcpy(disco_port_ptr->port_attributes. OSDeviceName, pathdevpath, size); } } /* add new discovered port into the list */ if (port_ptr->first_attached_port == NULL) { port_ptr->first_attached_port = disco_port_ptr; disco_port_ptr->index = 0; port_ptr->port_attributes.PortSpecificAttribute.\ SASPort->NumberofDiscoveredPorts = 1; } else { disco_port_ptr->next = port_ptr->first_attached_port; port_ptr->first_attached_port = disco_port_ptr; disco_port_ptr->index = port_ptr->port_attributes.\ PortSpecificAttribute.\ SASPort->NumberofDiscoveredPorts; port_ptr->port_attributes.PortSpecificAttribute.\ SASPort->NumberofDiscoveredPorts++; } disco_port_ptr->port_attributes.PortState = port_state; } if ((mapping_ptr = (struct ScsiEntryList *)calloc (1, sizeof (struct ScsiEntryList))) == NULL) { OUT_OF_MEMORY(ROUTINE); if (pathdevpath) di_devfs_path_free(pathdevpath); di_devfs_path_free(clientdevpath); free_attached_port(port_ptr); return (HBA_STATUS_ERROR); } if (di_path_prop_lookup_ints(path, "lun", &propIntData) != -1) { mapping_ptr->entry.ScsiId.ScsiOSLun = *propIntData; } else { if ((charptr = strchr(unit_address, ',')) != NULL) { charptr++; mapping_ptr->entry.ScsiId.ScsiOSLun = strtoull(charptr, NULL, 10); } else { log(LOG_DEBUG, ROUTINE, "Failed to get LUN from unit address of path(%s).", pathdevpath ? pathdevpath : "(missing device path)"); if (pathdevpath) di_devfs_path_free(pathdevpath); di_devfs_path_free(clientdevpath); free_attached_port(port_ptr); return (HBA_STATUS_ERROR); } } /* Get TargetLun(SAM LUN). */ if (di_path_prop_lookup_int64s(path, "lun64", &propInt64Data) != -1) { samLun = scsi_lun64_to_lun(*propInt64Data); (void) memcpy(&mapping_ptr->entry.PortLun.TargetLun, &samLun, 8); } else { log(LOG_DEBUG, ROUTINE, "No lun64 prop found on path (%s)", pathdevpath ? pathdevpath : "(missing device path)"); if (pathdevpath) di_devfs_path_free(pathdevpath); di_devfs_path_free(clientdevpath); free_attached_port(port_ptr); return (HBA_STATUS_ERROR); } if (di_path_prop_lookup_ints(path, "target", &propIntData) != -1) { mapping_ptr->entry.ScsiId.ScsiTargetNumber = *propIntData; } else { mapping_ptr->entry.ScsiId.ScsiTargetNumber = di_path_instance(path); } /* get ScsiBusNumber */ mapping_ptr->entry.ScsiId.ScsiBusNumber = port_ptr->cntlNumber; (void) memcpy(mapping_ptr->entry.PortLun.PortWWN.wwn, SASAddress.wwn, 8); /* Store the devices path for now. We'll convert to /dev later */ get_minor(clientdevpath, minorname); (void) snprintf(mapping_ptr->entry.ScsiId.OSDeviceName, sizeof (mapping_ptr->entry.ScsiId.OSDeviceName), "%s%s%s", DEVICES_DIR, clientdevpath, minorname); /* get luid. */ errno = 0; /* reset errno to 0 */ if (di_prop_lookup_strings(DDI_DEV_T_ANY, clientnode, "devid", &propStringData) != -1) { if (devid_str_decode(propStringData, &devid, NULL) != -1) { guidStr = devid_to_guid(devid); if (guidStr != NULL) { (void) strlcpy(mapping_ptr->entry.LUID.buffer, guidStr, sizeof (mapping_ptr->entry.LUID.buffer)); devid_free_guid(guidStr); } else { /* * Note: * if logical unit associated page 83 id * descriptor is not avaialble for the device * devid_to_guid returns NULl with errno 0. */ log(LOG_DEBUG, ROUTINE, "failed to get devid guid on (%s)", " associated with path(%s) : %s", clientdevpath, pathdevpath ? pathdevpath : "(missing device path)", strerror(errno)); } } else { /* * device may not support proper page 83 id descriptor. * leave LUID attribute to NULL and continue. */ log(LOG_DEBUG, ROUTINE, "failed to decode devid prop on (%s)", " associated with path(%s) : %s", clientdevpath, pathdevpath ? pathdevpath : "(missing device path)", strerror(errno)); } } else { /* leave LUID attribute to NULL and continue. */ log(LOG_DEBUG, ROUTINE, "Failed to get devid on %s" " associated with path(%s) : %s", clientdevpath, pathdevpath ? pathdevpath : "(missing device path)", strerror(errno)); } if (disco_port_ptr->scsiInfo == NULL) { disco_port_ptr->scsiInfo = mapping_ptr; } else { mapping_ptr->next = disco_port_ptr->scsiInfo; disco_port_ptr->scsiInfo = mapping_ptr; } if (pathdevpath) di_devfs_path_free(pathdevpath); di_devfs_path_free(clientdevpath); return (HBA_STATUS_OK); } /* * walks the devinfo tree retrieving all hba information */ extern HBA_STATUS devtree_attached_devices(di_node_t node, struct sun_sas_port *port_ptr) { const char ROUTINE[] = "devtree_attached_devices"; di_node_t nodechild = DI_NODE_NIL; di_path_t path = DI_PATH_NIL; /* child should be device */ if ((nodechild = di_child_node(node)) == DI_NODE_NIL) { log(LOG_DEBUG, ROUTINE, "No devinfo child on the HBA port node."); } if ((path = di_path_phci_next_path(node, path)) == DI_PATH_NIL) { log(LOG_DEBUG, ROUTINE, "No pathinfo node on the HBA port node."); } if ((nodechild == DI_NODE_NIL) && (path == DI_PATH_NIL)) { return (HBA_STATUS_OK); } while (nodechild != DI_NODE_NIL) { if (get_attached_devices_info(nodechild, port_ptr) != HBA_STATUS_OK) { break; } nodechild = di_sibling_node(nodechild); } while (path != DI_PATH_NIL) { if (get_attached_paths_info(path, port_ptr) != HBA_STATUS_OK) { break; } path = di_path_phci_next_path(node, path); } return (HBA_STATUS_OK); }