/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, Version 1.0 only * (the "License"). You may not use this file except in compliance * with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2005 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. * * Serengeti Platform specific functions. * */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if !defined(TEXT_DOMAIN) #define TEXT_DOMAIN "SYS_TEST" #endif #define SCHIZO_COMPATIBLE "pci108e,8001" #define XMITS_COMPATIBLE "pci108e,8002" #define ACTIVE 0 #define INACTIVE 1 #define DISPLAY_INFO 40 #define EVNT2STR(e) ((e) == CFGA_STAT_NONE ? "none" : \ (e) == CFGA_STAT_EMPTY ? "empty" : \ (e) == CFGA_STAT_DISCONNECTED ? "disconnected" : \ (e) == CFGA_STAT_CONNECTED ? "connected" : \ (e) == CFGA_STAT_UNCONFIGURED ? "unconfigured" : \ (e) == CFGA_STAT_CONFIGURED ? "configured" : \ "unknown") #define COND2STR(c) ((c) == CFGA_COND_UNKNOWN ? "unknown" : \ (c) == CFGA_COND_OK ? "ok" : \ (c) == CFGA_COND_FAILING ? "failing" : \ (c) == CFGA_COND_FAILED ? "failed" : \ (c) == CFGA_COND_UNUSABLE ? "unusable" : \ "???") #define SG_CLK_FREQ_TO_MHZ(x) (((x) + 500000) / 1000000) #define MAX_STATUS_LEN 8 #define SG_FAIL "fail" #define SG_DISABLED "disabled" #define SG_DEGRADED "degraded" #define SG_OK "ok" #define SG_SCHIZO_FAILED 1 #define SG_SCHIZO_GOOD 0 #define DEFAULT_MAX_FREQ 66 /* 66 MHz */ #define PCIX_MAX_FREQ 100 /* 100 MHz */ #define CFG_CPU "::cpu" #define CFG_SET_FRU_NAME_NODE(str, num) \ { \ char tmp_str[MAX_FRU_NAME_LEN]; \ sprintf(tmp_str, "/N%d", num); \ strncat(str, tmp_str, sizeof (tmp_str)); \ } #define CFG_SET_FRU_NAME_CPU_BOARD(str, num) \ { \ char tmp_str[MAX_FRU_NAME_LEN]; \ sprintf(tmp_str, ".%s%d", SG_HPU_TYPE_CPU_BOARD_ID, num); \ strncat(str, tmp_str, sizeof (tmp_str)); \ } #define CFG_SET_FRU_NAME_MODULE(str, num) \ { \ char tmp_str[MAX_FRU_NAME_LEN]; \ sprintf(tmp_str, "%s%d", CFG_CPU, num); \ strncat(str, tmp_str, sizeof (tmp_str)); \ } extern int print_flag; /* * these functions will overlay the symbol table of libprtdiag * at runtime (Serengeti systems only) */ int do_prominfo(int syserrlog, char *pgname, int log_flag, int prt_flag); void *get_prop_val(Prop *prop); Prop *find_prop(Prom_node *pnode, char *name); char *get_node_name(Prom_node *pnode); char *get_node_type(Prom_node *pnode); void add_node(Sys_tree *, Prom_node *); void display_pci(Board_node *); void display_ffb(Board_node *, int); void display_io_cards(struct io_card *list); void display_cpu_devices(Sys_tree *tree); void display_cpus(Board_node *board); void display_diaginfo(int flag, Prom_node *root, Sys_tree *tree, struct system_kstat_data *kstats); void display_hp_fail_fault(Sys_tree *tree, struct system_kstat_data *kstats); void get_failed_parts(void); int display_failed_parts(Sys_tree *tree); void display_memoryconf(Sys_tree *tree, struct grp_info *grps); void print_us3_memory_line(int portid, int bank_id, uint64_t bank_size, char *bank_status, uint64_t dimm_size, uint32_t intlv, int seg_id); /* Local Functions */ static void serengeti_display_hw_revisions(Prom_node *root, Board_node *bnode); static Board_node *serengeti_find_board(Sys_tree *root, int board, int nodeid); static Board_node *serengeti_insert_board(Sys_tree *root, int board, int nid); static int display_schizo_revisions(Board_node *bdlist, int mode); static void display_sgsbbc_revisions(Board_node *bdlist); static void serengeti_display_board_info(int state); static void serengeti_display_board_info_header(int state); static boolean_t cpu_node_configured(char *const node); static void display_io_max_bus_speed(struct io_card *p); static void display_io_slot_info(struct io_card *p); static void get_slot_name(struct io_card *card, char *slot_name); /* The bus max freq is determined based on board level in use */ int board_bus_max_freq = DEFAULT_MAX_FREQ; /* 66MHz default */ /* * Serengeti now uses both the devinfo tree and the OBP tree for it's * prtdiag. The devinfo tree is used for getting the HW config of the * system and the OBP device tree is used for listing the failed HW * in the system. This is because devinfo currently does not include * any PROM nodes with a status of 'fail' so we need to go to OBP to * get a list of failed HW. We use the tree flag to allow the same code * to walk both trees. * * We really need to look at having a single tree for all platforms! */ #define DEVINFO_TREE 1 #define OBP_TREE 2 static int tree = DEVINFO_TREE; #ifdef DEBUG #define D_PRINTFINDENT printfindent void printfindent(int indent, char *fmt, ...) { va_list ap; int i = 0; for (i = 0; i < indent; i ++) printf("\t"); va_start(ap); (void) vprintf(fmt, ap); va_end(ap); } #else #define D_PRINTFINDENT #endif /* * display_pci * Display all the PCI IO cards on this board. */ void display_pci(Board_node *board) { struct io_card *card_list = NULL; struct io_card card; void *value; Prom_node *pci; Prom_node *card_node; Prom_node *pci_bridge_node; Prom_node *child_pci_bridge_node; char *slot_name = NULL; /* info in "slot-names" prop */ char *child_name; char *name, *type; char *pname, *ptype; char buf[MAXSTRLEN]; int *int_val; int pci_bus; int pci_bridge = 0; int pci_bridge_dev_no; char *slot_name_arr[SG_MAX_SLOTS_PER_IO_BD] = {NULL}; int i; int portid; int level = 0; int version, *pversion; #ifdef DEBUG int slot_name_bits; #endif if (board == NULL) return; /* Initialize all the common information */ card.display = TRUE; card.board = board->board_num; card.node_id = board->node_id; /* * Search for each schizo and xmits, then find/display all nodes under * each schizo and xmits node found. */ for (pci = dev_find_node_by_compatible(board->nodes, SCHIZO_COMPATIBLE); pci != NULL; pci = dev_next_node_by_compatible(pci, SCHIZO_COMPATIBLE)) { /* set max freq for this board */ board_bus_max_freq = DEFAULT_MAX_FREQ; /* * Find out if this is a PCI or cPCI IO Board. * If "enum-impl" property exists in pci node => cPCI. */ value = get_prop_val(find_prop(pci, "enum-impl")); if (value == NULL) { (void) sprintf(card.bus_type, "PCI"); } else { (void) sprintf(card.bus_type, "cPCI"); } if (strstr((char *)get_prop_val( find_prop(pci, "compatible")), XMITS_COMPATIBLE)) { sprintf(card.notes, "%s", XMITS_COMPATIBLE); /* * With XMITS 3.X and PCI-X mode, the bus speed * can be higher than 66MHZ. */ value = (int *)get_prop_val (find_prop(pci, "module-revision#")); if (value) { pversion = (int *)value; version = *pversion; if (version >= 4) board_bus_max_freq = PCIX_MAX_FREQ; } } else if (strstr((char *)get_prop_val( find_prop(pci, "compatible")), SCHIZO_COMPATIBLE)) sprintf(card.notes, "%s", SCHIZO_COMPATIBLE); else sprintf(card.notes, " "); /* * Get slot-name properties from parent node and * store them in an array. */ value = (char *)get_prop_val(find_prop(pci, "slot-names")); if (value != NULL) { #ifdef DEBUG /* save the 4 byte bitmask */ slot_name_bits = *(int *)value; #endif /* array starts after first int */ slot_name_arr[0] = (char *)value + sizeof (int); D_PRINTFINDENT(0, "slot_name_arr[0] is [%s]\n", slot_name_arr[0]); for (i = 1; i < SG_MAX_SLOTS_PER_IO_BD; i++) { slot_name_arr[i] = (char *)slot_name_arr[i - 1] + strlen(slot_name_arr[i - 1]) +1; D_PRINTFINDENT(0, "slot_name_arr[%d] is [%s]\n", i, slot_name_arr[i]); } } /* * Search for Children of this node ie. Cards. * Note: any of these cards can be a pci-bridge * that itself has children. If we find a * pci-bridge we need to handle it specially. * * There can now be the condition of a pci-bridge * being the child of a pci-bridge which create a * two levels of pci-bridges. This special condition * needs to be handled as well. The variable level * is used to track the depth of the tree. This * variable is then used to find instances of this case. */ level = 0; card_node = pci->child; while (card_node != NULL) { pci_bridge = 0; /* If it doesn't have a name, skip it */ name = (char *)get_prop_val( find_prop(card_node, "name")); if (name == NULL) { card_node = card_node->sibling; continue; } D_PRINTFINDENT(level, "NAME is %s\n", name); type = (char *)get_prop_val( find_prop(card_node, "device_type")); /* * get dev# and func# for this card from the * 'reg' property. */ int_val = (int *)get_prop_val( find_prop(card_node, "reg")); if (int_val != NULL) { card.dev_no = (((*int_val) & 0xF800) >> 11); card.func_no = (((*int_val) & 0x700) >> 8); } else { card.dev_no = -1; card.func_no = -1; } /* * If this is a pci-bridge, then store it's dev# * as it's children nodes need this to get their slot#. * We set the pci_bridge flag so that we know we are * looking at a pci-bridge node. This flag gets reset * every time we enter this while loop. */ /* * Check for a PCI-PCI Bridge for PCI and cPCI * IO Boards using the name and type properties. * * If level is greater then 0, then check the parent * node to see if it was also a pci-bridge. We do not * this when level is 0 as this will see the schizo or * xmits device as a pci-bridge node. This will mess * up the slot number of child nodes. */ if ((type != NULL) && (strncmp(name, "pci", 3) == 0) && (strcmp(type, "pci") == 0)) { if (level > 0) { pname = (char *)get_prop_val( find_prop(card_node->parent, "name")); ptype = (char *)get_prop_val( find_prop(card_node->parent, "device_type")); if ((ptype != NULL) && (pname != NULL) && (strncmp(pname, "pci", 3) == 0) && (strcmp(ptype, "pci") == 0)) { child_pci_bridge_node = card_node; } else { pci_bridge_dev_no = card.dev_no; pci_bridge_node = card_node; } } else { pci_bridge_dev_no = card.dev_no; pci_bridge_node = card_node; } pci_bridge = TRUE; D_PRINTFINDENT(level, "pci_bridge_dev_no is [%d]\n", pci_bridge_dev_no); } /* * Get slot-names property from slot_names_arr. * If we are the child of a pci_bridge we use the * dev# of the pci_bridge as an index to get * the slot number. We know that we are a child of * a pci-bridge if our parent is the same as the last * pci_bridge node found above. */ if (type) D_PRINTFINDENT(level, "*** name is [%s] - type is [%s]\n", name, type); else D_PRINTFINDENT(level, "*** name is [%s]\n", name); if (card.dev_no != -1) { /* * We compare this cards parent node with the * pci_bridge_node to see if it's a child. */ if (((level > 0) && (card_node->parent->parent == pci_bridge_node)) || (card_node->parent == pci_bridge_node)) { /* use dev_no of pci_bridge */ D_PRINTFINDENT(level, " pci_bridge_dev_no is [%d]\n", pci_bridge_dev_no); slot_name = slot_name_arr[pci_bridge_dev_no -1]; } else { /* use cards own dev_no */ D_PRINTFINDENT(level, " card.dev_no is [%d]\n", card.dev_no); slot_name = slot_name_arr[card.dev_no - 1]; } get_slot_name(&card, slot_name); } else { (void) sprintf(card.slot_str, "%c", '-'); } /* * Get the portid of the schizo and xmits that this card * lives under. */ portid = -1; value = get_prop_val(find_prop(pci, "portid")); if (value != NULL) { portid = *(int *)value; } card.schizo_portid = portid; #ifdef DEBUG (void) sprintf(card.notes, "%s portid [%d] dev_no[%d]" " slot_name[%s] name_bits[%d]", card.notes, portid, card.dev_no, slot_name, slot_name_bits); #endif /* * Find out whether this is PCI bus A or B * using the 'reg' property. */ int_val = (int *)get_prop_val (find_prop(pci, "reg")); if (int_val != NULL) { int_val ++; /* skip over first integer */ pci_bus = ((*int_val) & 0x7f0000); if (pci_bus == 0x600000) card.pci_bus = 'A'; else if (pci_bus == 0x700000) card.pci_bus = 'B'; else card.pci_bus = '-'; } else { card.pci_bus = '-'; } /* * Check for failed status. */ if (node_status(card_node, SG_FAIL)) strncpy(card.status, SG_FAIL, sizeof (SG_FAIL)); else if (node_status(card_node, SG_DISABLED)) strncpy(card.status, SG_DISABLED, sizeof (SG_DISABLED)); else strncpy(card.status, SG_OK, sizeof (SG_OK)); /* Get the model of this card */ value = get_prop_val(find_prop(card_node, "model")); if (value == NULL) card.model[0] = '\0'; else { (void) sprintf(card.model, "%s", (char *)value); /* Skip sgsbbc nodes, they are not cards */ if (strcmp(card.model, "SUNW,sgsbbc") == 0) { card_node = card_node->sibling; continue; } } /* * Check if further processing is necessary to display * this card uniquely. */ distinguish_identical_io_cards(name, card_node, &card); /* * The card may have a "clock-frequency" but we * are not interested in that. Instead we get the * "clock-frequency" of the PCI Bus that the card * resides on. PCI-A can operate at 33Mhz or 66Mhz * depending on what card is plugged into the Bus. * PCI-B always operates at 33Mhz. * */ int_val = get_prop_val(find_prop(pci, "clock-frequency")); if (int_val != NULL) { card.freq = SG_CLK_FREQ_TO_MHZ(*int_val); } else { card.freq = -1; } /* * Figure out how we want to display the name */ value = get_prop_val(find_prop(card_node, "compatible")); if (value != NULL) { /* use 'name'-'compatible' */ (void) sprintf(buf, "%s-%s", name, (char *)value); } else { /* just use 'name' */ (void) sprintf(buf, "%s", name); } name = buf; /* * If this node has children, add the device_type * of the child to the name value of this card. */ child_name = (char *)get_node_name(card_node->child); if ((card_node->child != NULL) && (child_name != NULL)) { value = get_prop_val(find_prop(card_node->child, "device_type")); if (value != NULL) { /* add device_type of child to name */ (void) sprintf(card.name, "%s/%s (%s)", name, child_name, (char *)value); } else { /* just add childs name */ (void) sprintf(card.name, "%s/%s", name, child_name); } } else { (void) sprintf(card.name, "%s", (char *)name); } /* * If this is a pci-bridge, then add the word * 'pci-bridge' to it's model. */ if (pci_bridge) { if (strlen(card.model) == 0) (void) sprintf(card.model, "%s", "pci-bridge"); else (void) sprintf(card.model, "%s/pci-bridge", card.model); } /* insert this card in the list to be displayed later */ card_list = insert_io_card(card_list, &card); /* * If we are dealing with a pci-bridge, we need to move * down to the children of this bridge if there are any. * * If we are not, we are either dealing with a regular * card (in which case we move onto the sibling of this * card) or we are dealing with a child of a pci-bridge * (in which case we move onto the child's siblings or * if there are no more siblings for this child, we * move onto the parents siblings). * * Once we reach the last child node of a pci-bridge, * we need to back up the tree to the parents sibling * node. If our parent has no more siblings, we need * to check our grand parent for siblings. * * If we have no more siblings, we simply point to * to the child's sibling which moves us onto the next * bus leaf. * * The variable level gets adjusted on some of the * conditions as this is used to track level within * the tree we have reached. */ if (pci_bridge) { if (card_node->child != NULL) { level++; card_node = card_node->child; } else card_node = card_node->sibling; } else { if ((card_node->parent == pci_bridge_node) && (card_node->sibling == NULL)) { card_node = pci_bridge_node->sibling; if (level > 0) level--; } else if ((card_node->parent == child_pci_bridge_node) && (card_node->parent->parent == pci_bridge_node)) { if ((child_pci_bridge_node->sibling) && (card_node->sibling == NULL)) { card_node = child_pci_bridge_node->sibling; if (level > 0) level--; } else if ((pci_bridge_node->sibling) && (card_node->sibling == NULL)) { card_node = pci_bridge_node->sibling; if (level > 1) level = level - 2; else if (level > 0) level--; } else card_node = card_node->sibling; } else card_node = card_node->sibling; } } /* end-while */ } /* end-for */ display_io_cards(card_list); free_io_cards(card_list); } /* * display_ffb * * There are no FFB's on a Serengeti, however in the generic library, * the display_ffb() function is implemented so we have to define an * empty function here. */ /*ARGSUSED0*/ void display_ffb(Board_node *board, int table) {} static void serengeti_display_board_info_header(int state) { char *fmt = "%-9s %-11s %-12s %-12s %-9s %-40s\n"; log_printf("\n", 0); log_printf("=========================", 0); if (state == ACTIVE) log_printf(dgettext(TEXT_DOMAIN, " Active Boards for Domain "), 0); else log_printf(dgettext(TEXT_DOMAIN, " Available Boards/Slots for Domain "), 0); log_printf("===========================", 0); log_printf("\n", 0); log_printf("\n", 0); log_printf(fmt, "", "Board", "Receptacle", "Occupant", "", "", 0); log_printf(fmt, "FRU Name", "Type", "Status", "Status", "Condition", "Info", 0); log_printf(fmt, "---------", "-----------", "-----------", "------------", "---------", "----------------------------------------", 0); } static void serengeti_display_board_info(int state) { int i, z, ret; int nlist = 0; int available_board_count = 0; struct cfga_list_data *board_cfg = NULL; char *err_string = NULL; char tmp_id[CFGA_LOG_EXT_LEN + 1]; char tmp_info[DISPLAY_INFO + 1]; const char listops[] = "class=sbd"; struct cfga_list_data dat; cfga_flags_t flags = NULL; ret = config_list_ext(0, NULL, &board_cfg, &nlist, NULL, listops, &err_string, flags); if (ret == CFGA_OK) { serengeti_display_board_info_header(state); for (i = 0; i < nlist; i++) { dat = board_cfg[i]; if ((state != ACTIVE) && (dat.ap_o_state == CFGA_STAT_CONFIGURED)) continue; else if ((state == ACTIVE) && (dat.ap_o_state != CFGA_STAT_CONFIGURED)) continue; if (state == INACTIVE) available_board_count++; memcpy(tmp_id, dat.ap_log_id, CFGA_LOG_EXT_LEN); tmp_id[CFGA_LOG_EXT_LEN] = '\0'; for (z = 0; z < strlen(tmp_id); z++) { if (tmp_id[z] == '.') tmp_id[z] = '/'; } log_printf("/%-8s ", tmp_id, 0); log_printf("%-11s ", dat.ap_type, 0); log_printf("%-12s ", EVNT2STR(dat.ap_r_state), 0); log_printf("%-12s ", EVNT2STR(dat.ap_o_state), 0); log_printf("%-8s ", COND2STR(dat.ap_cond), 0); memcpy(tmp_info, dat.ap_info, DISPLAY_INFO); tmp_info[DISPLAY_INFO - 1] = '\0'; if (strlen(tmp_info) >= (DISPLAY_INFO - 1)) tmp_info[DISPLAY_INFO - 2] = '+'; log_printf("%-*s\n", (DISPLAY_INFO - 1), tmp_info, 0); } if ((state == INACTIVE) && (available_board_count == 0)) { log_printf(dgettext(TEXT_DOMAIN, "There are currently no " "Boards/Slots available " "to this Domain\n"), 0); } } if (board_cfg) free(board_cfg); if (err_string) free(err_string); } /* * add_node * * This function adds a board node to the board structure where that * that node's physical component lives. */ void add_node(Sys_tree *root, Prom_node *pnode) { int board = -1; int portid = -1; int nodeid = -1; void *value = NULL; Board_node *bnode = NULL; Prom_node *p = NULL; char *type; /* Get the board number of this board from the portid prop */ if ((value = get_prop_val(find_prop(pnode, "portid"))) == NULL) { if ((type = get_node_type(pnode)) && (strcmp(type, "cpu") == 0)) value = get_prop_val(find_prop(pnode->parent, "portid")); } if (value != NULL) { portid = *(int *)value; } nodeid = SG_PORTID_TO_NODEID(portid); board = SG_PORTID_TO_BOARD_NUM(portid); /* find the board node with the same board number */ if ((bnode = serengeti_find_board(root, board, nodeid)) == NULL) { bnode = serengeti_insert_board(root, board, nodeid); } /* now attach this prom node to the board list */ /* Insert this node at the end of the list */ pnode->sibling = NULL; if (bnode->nodes == NULL) bnode->nodes = pnode; else { p = bnode->nodes; while (p->sibling != NULL) p = p->sibling; p->sibling = pnode; } } /* * Print out all the io cards in the list. Also print the column * headers if told to do so. */ void display_io_cards(struct io_card *list) { char *fmt = "%-10s %-4s %-4s %-4s %-4s %-4s %-4s %-4s %-4s %-34s"; static int banner = FALSE; /* Have we printed the column headings? */ struct io_card *p; if (list == NULL) return; if (banner == FALSE) { log_printf(fmt, "", "", "", "", "", "Bus", "Max", "", "", "", 0); log_printf("\n", 0); log_printf(fmt, "", "IO", "Port", "Bus", "", "Freq", "Bus", "Dev,", "", "", 0); log_printf("\n", 0); log_printf(fmt, "FRU Name", "Type", " ID", "Side", "Slot", "MHz", "Freq", "Func", "State", "Name", 0); #ifdef DEBUG log_printf("Model Notes\n", 0); #else log_printf("Model\n", 0); #endif log_printf(fmt, "----------", "----", "----", "----", "----", "----", "----", "----", "-----", "--------------------------------", 0); #ifdef DEBUG log_printf("---------------------- ", 0); #endif log_printf("----------------------\n", 0); banner = TRUE; } for (p = list; p != NULL; p = p -> next) { display_io_slot_info(p); display_io_max_bus_speed(p); log_printf("\n", 0); } } static void display_io_slot_info(struct io_card *p) { char fru_name[MAX_FRU_NAME_LEN] = ""; SG_SET_FRU_NAME_NODE(fru_name, p->node_id); SG_SET_FRU_NAME_IO_BOARD(fru_name, p->board); SG_SET_FRU_NAME_MODULE(fru_name, p->schizo_portid % 2); log_printf("%-8s ", fru_name, 0); log_printf("%-4s ", p->bus_type, 0); log_printf("%-3d ", p->schizo_portid, 0); log_printf("%c ", p->pci_bus, 0); log_printf("%-1s ", p->slot_str, 0); log_printf("%-3d ", p->freq, 0); } #define BUS_SPEED_PRINT(speed) log_printf(" %d ", speed, 0) static void display_io_max_bus_speed(struct io_card *p) { int speed = board_bus_max_freq; switch (p->pci_bus) { case 'A': BUS_SPEED_PRINT(speed); break; case 'B': if (strcmp(p->notes, XMITS_COMPATIBLE) == 0) { if ((strncmp(p->slot_str, "1", 1) == 0) || (strncmp(p->slot_str, "0", 1) == 0)) BUS_SPEED_PRINT(33); else BUS_SPEED_PRINT(speed); } else BUS_SPEED_PRINT(33); break; default: log_printf(" - ", 0); break; } log_printf("%-1d,%-1d ", p->dev_no, p->func_no, 0); log_printf("%-5s ", p->status, 0); log_printf("%-32.32s%c ", p->name, ((strlen(p->name) > 32) ? '+' : ' '), 0); log_printf("%-22.22s%c", p->model, ((strlen(p->model) > 22) ? '+' : ' '), 0); #ifdef DEBUG log_printf(" %s", p->notes, 0); #endif /* DEBUG */ } void display_cpu_devices(Sys_tree *tree) { Board_node *bnode; /* printf formats */ char *fmt1 = "%-10s %-7s %-4s %-4s %-7s %-4s\n"; /* * Display the table header for CPUs . Then display the CPU * frequency, cache size, and processor revision of all cpus. */ log_printf("\n", 0); log_printf("=========================", 0); log_printf(" CPUs ", 0); log_printf("=========================", 0); log_printf("======================", 0); log_printf("\n", 0); log_printf("\n", 0); log_printf(fmt1, "", "CPU ", "Run", " E$", "CPU", "CPU", 0); log_printf(fmt1, "FRU Name", "ID ", "MHz", " MB", "Impl.", "Mask", 0); log_printf(fmt1, "----------", "-------", "----", "----", "-------", "----", 0); /* Now display all of the cpus on each board */ bnode = tree->bd_list; while (bnode != NULL) { display_cpus(bnode); bnode = bnode->next; } log_printf("\n", 0); } static boolean_t cpu_node_configured(char *const node) { int ret, i; int nlist = 0; boolean_t rv; char *err_string = NULL; char *const *ap_args = NULL; struct cfga_list_data *statlist = NULL; struct cfga_list_data dat; cfga_flags_t flags = CFGA_FLAG_LIST_ALL; if (node == NULL) return (FALSE); ap_args = &node; ret = config_list_ext(1, &node, &statlist, &nlist, NULL, NULL, &err_string, flags); if (ret == CFGA_OK) { dat = statlist[0]; if (dat.ap_o_state == CFGA_STAT_CONFIGURED) rv = TRUE; else rv = FALSE; } else { rv = FALSE; } if (statlist) free(statlist); if (err_string) free(err_string); return (rv); } /* * Display the CPUs present on this board. */ void display_cpus(Board_node *board) { Prom_node *cpu; int freq; /* CPU clock frequency */ int ecache_size; /* External cache size */ int board_num = board->board_num; int *mid; int *impl; int *mask; int decoded_mask; int *coreid; int mid_prev = -1; int ecache_size_prev = 0; char fru_prev[MAX_FRU_NAME_LEN] = ""; /* * display the CPUs' operating frequency, cache size, impl. field * and mask revision. */ for (cpu = dev_find_type(board->nodes, "cpu"); cpu != NULL; cpu = dev_next_type(cpu, "cpu")) { char fru_name[MAX_FRU_NAME_LEN] = ""; char cfg_fru_name[MAX_FRU_NAME_LEN] = ""; mid = (int *)get_prop_val(find_prop(cpu, "portid")); if (mid == NULL) mid = (int *)get_prop_val(find_prop(cpu, "cpuid")); freq = SG_CLK_FREQ_TO_MHZ(get_cpu_freq(cpu)); ecache_size = get_ecache_size(cpu); impl = (int *)get_prop_val(find_prop(cpu, "implementation#")); mask = (int *)get_prop_val(find_prop(cpu, "mask#")); /* Do not display a failed CPU node */ if ((impl == NULL) || (freq == 0) || (node_failed(cpu))) continue; /* FRU Name */ SG_SET_FRU_NAME_NODE(fru_name, board->node_id); SG_SET_FRU_NAME_CPU_BOARD(fru_name, board_num); SG_SET_FRU_NAME_MODULE(fru_name, *mid % 4); if (CPU_IMPL_IS_CMP(*impl)) { coreid = (int *)get_prop_val(find_prop(cpu, "reg")); if (coreid == NULL) { continue; } /* * The assumption is made that 2 cores will always be * listed together in the device tree. If either core * is "bad" then the FRU will not be listed. * * As display_cpus on Serengeti does actually process * all cpu's per board a copy of the fru_name needs to * be made as the following core may not be its * sibling. If this is the case it is assumed that a * sibling core has failed, so the fru should not be * displayed. * * For the first instance of a core, fru_prev is * expected to be empty. The current values are then * stored and the next board->nodes is processed. If * this is a sibling core, the ecache size it tallied * and the previous value reset and processing * continues. * * If the following core is not a sibling, the new * values are stored and the next board->nodes is * processed. */ if (strncmp(fru_prev, "", sizeof (fru_prev)) == 0) { strncpy(fru_prev, fru_name, sizeof (fru_name)); mid_prev = *mid; ecache_size_prev = ecache_size; continue; } else { if (strncmp(fru_name, fru_prev, sizeof (fru_prev)) == 0) { /* * Jaguar has a split E$, so the size * for both cores must be added together * to get the total size for the entire * chip. * * Panther E$ (L3) is logically shared, * so the total size is equal to the * core size. */ if (IS_JAGUAR(*impl)) { ecache_size += ecache_size_prev; } ecache_size_prev = 0; strncpy(fru_prev, "", sizeof (fru_prev)); } else { mid_prev = *mid; ecache_size_prev = ecache_size; strncpy(fru_prev, fru_name, sizeof (fru_name)); continue; } } } /* * If cpu is not configured, do not display it */ CFG_SET_FRU_NAME_NODE(cfg_fru_name, board->node_id); CFG_SET_FRU_NAME_CPU_BOARD(cfg_fru_name, board_num); CFG_SET_FRU_NAME_MODULE(cfg_fru_name, *mid % 4); if (!(cpu_node_configured(cfg_fru_name))) { continue; } log_printf("%-10s ", fru_name, 0); /* CPU MID */ if (CPU_IMPL_IS_CMP(*impl)) { log_printf("%3d,%3d ", mid_prev, *mid, 0); mid_prev = -1; } else log_printf("%3d ", *mid, 0); /* Running frequency */ log_printf(" %4d ", freq, 0); /* Ecache size */ if (ecache_size == 0) log_printf("%3s ", "N/A", 0); else log_printf("%4.1f ", (float)ecache_size / (float)(1<<20), 0); /* Implementation */ if (impl == NULL) { log_printf("%6s ", " N/A", 0); } else { switch (*impl) { case CHEETAH_IMPL: log_printf("%-7s ", "US-III", 0); break; case CHEETAH_PLUS_IMPL: log_printf("%-7s ", "US-III+", 0); break; case JAGUAR_IMPL: log_printf("%-7s ", "US-IV", 0); break; case PANTHER_IMPL: log_printf("%-7s ", "US-IV+", 0); break; default: log_printf("%-7x ", *impl, 0); break; } } /* CPU Mask */ if (mask == NULL) { log_printf(" %3s ", "N/A", 0); } else { if (IS_CHEETAH(*impl)) decoded_mask = REMAP_CHEETAH_MASK(*mask); else decoded_mask = *mask; log_printf(" %d.%d ", (decoded_mask >> 4) & 0xf, decoded_mask & 0xf, 0); } log_printf("\n", 0); } } /*ARGSUSED3*/ void display_diaginfo(int flag, Prom_node *root, Sys_tree *tree, struct system_kstat_data *kstats) { log_printf("\n", 0); log_printf("=========================", 0); log_printf(dgettext(TEXT_DOMAIN, " Hardware Failures "), 0); log_printf("==================================", 0); log_printf("\n", 0); /* * Get a list of failed parts (ie. devices with a status of * 'fail') from the OBP device tree and display them. */ get_failed_parts(); /* return unless -v option specified */ if (!flag) { log_printf("\n", 0); return; } /* * display time of latest powerfail. Not all systems * have this capability. For those that do not, this * is just a no-op. */ disp_powerfail(root); /* Print the PROM revisions here */ serengeti_display_hw_revisions(root, tree->bd_list); } /* * local functions - functions that are only needed inside this library */ static void serengeti_display_hw_revisions(Prom_node *root, Board_node *bdlist) { Prom_node *pnode; char *value; /* Print the header */ log_printf("\n", 0); log_printf("=========================", 0); log_printf(dgettext(TEXT_DOMAIN, " HW Revisions "), 0); log_printf("=======================================", 0); log_printf("\n", 0); log_printf("\n", 0); /* Display Prom revision header */ log_printf("System PROM revisions:\n", 0); log_printf("----------------------\n", 0); /* * Display OBP version info */ pnode = dev_find_node(root, "openprom"); if (pnode != NULL) { value = (char *)get_prop_val(find_prop(pnode, "version")); log_printf("%s\n\n", value, 0); } else { log_printf("OBP ???\n\n", value, 0); } /* * Display ASIC revisions */ log_printf("IO ASIC revisions:\n", 0); log_printf("------------------\n", 0); log_printf(" Port\n", 0); log_printf("FRU Name Model ID Status", 0); #ifdef DEBUG log_printf(" Version Notes\n", 0); #else log_printf(" Version\n", 0); #endif /* ---------FRU Name--Model-----------Port-Status */ log_printf("----------- --------------- ---- ---------- " #ifdef DEBUG "------- " #endif "-------\n", 0); /* * Display SCHIZO version info */ display_schizo_revisions(bdlist, SG_SCHIZO_GOOD); /* * Display sgsbbc version info */ display_sgsbbc_revisions(bdlist); } /* * This function displays Schizo and Xmits revision of boards */ static int display_schizo_revisions(Board_node *bdlist, int mode) { Prom_node *pnode; int *int_val; int portid; int prev_portid = -1; char *model; char *status_a, *status_b; char status[MAX_STATUS_LEN]; int version; int node_id; #ifdef DEBUG uint32_t a_notes, b_notes; #endif int pci_bus; /* * rv is used when mode is set to SG_SCHIZO_FAILED. * We need to signal if a failure is found so that * the correct headers/footers can be printed. * * rv = 1 implies a failed/disavled schizo device * rv = 0 implies all other cases */ int rv = 0; Board_node *bnode; void *value; bnode = bdlist; while (bnode != NULL) { /* * search this board node for all Schizos */ for (pnode = dev_find_node_by_compatible(bnode->nodes, SCHIZO_COMPATIBLE); pnode != NULL; pnode = dev_next_node_by_compatible(pnode, SCHIZO_COMPATIBLE)) { char fru_name[MAX_FRU_NAME_LEN] = ""; /* * get the reg property to determine * whether we are looking at side A or B */ int_val = (int *)get_prop_val (find_prop(pnode, "reg")); if (int_val != NULL) { int_val ++; /* second integer in array */ pci_bus = ((*int_val) & 0x7f0000); } /* get portid */ int_val = (int *)get_prop_val (find_prop(pnode, "portid")); if (int_val == NULL) continue; portid = *int_val; /* * If this is a new portid and it is PCI bus B, * we skip onto the PCI bus A. (PCI-A and PCI-B share * the same portid) */ if ((portid != prev_portid) && (pci_bus == 0x700000)) { prev_portid = portid; /* status */ status_b = (char *)get_prop_val (find_prop(pnode, "status")); #ifdef DEBUG b_notes = pci_bus; #endif continue; /* skip to the next schizo */ } /* * This must be side A of the same Schizo. * Gather all its props and display them. */ #ifdef DEBUG a_notes = pci_bus; #endif prev_portid = portid; /* get the node-id */ node_id = SG_PORTID_TO_NODEID(portid); /* model */ model = (char *)get_prop_val (find_prop(pnode, "model")); /* version */ value = (int *)get_prop_val (find_prop(pnode, "module-revision#")); if (value) int_val = (int *)value; else int_val = (int *)get_prop_val (find_prop(pnode, "version#")); if (int_val != NULL) version = *int_val; else version = -1; /* status */ status_a = (char *)get_prop_val(find_prop (pnode, "status")); /* * Display the data */ /* FRU Name */ SG_SET_FRU_NAME_NODE(fru_name, node_id); SG_SET_FRU_NAME_IO_BOARD(fru_name, SG_IO_BD_PORTID_TO_BD_NUM(portid)); SG_SET_FRU_NAME_MODULE(fru_name, portid % 2); if (mode == SG_SCHIZO_FAILED) { if ((status_a != (char *)NULL) && ((status_b != (char *)NULL))) { if ((strcmp (status_a, SG_DISABLED) == 0) && (strcmp(status_b, SG_DISABLED) == 0)) { log_printf("\tFRU Type : %s\n ", model, 0); log_printf("\tLocation : %s\n", fru_name, 0); log_printf ("\tPROM status: %s\n\n", SG_DISABLED, 0); rv = 1; } } continue; } /* * This section of code is executed when displaying * non-failed schizo devices. If the mode is set to * SG_SCHIZO_FAILED, then this section of code will * not be executed */ if ((status_a == (char *)NULL) && ((status_b == (char *)NULL))) sprintf(status, " %s ", SG_OK); else if ((status_a == (char *)NULL) && ((strcmp(status_b, SG_DISABLED) == 0))) sprintf(status, " %s", SG_DEGRADED); else if ((status_b == (char *)NULL) && ((strcmp(status_a, SG_DISABLED) == 0))) sprintf(status, " %s", SG_DEGRADED); else continue; log_printf("%-12s", fru_name, 0); /* model */ if (model != NULL) log_printf("%-15s ", model, 0); else log_printf("%-15s ", "unknown", 0); /* portid */ log_printf("%-3d ", portid, 0); /* status */ log_printf("%s", status, 0); /* version */ log_printf(" %-4d ", version, 0); #ifdef DEBUG log_printf("0x%x 0x%x", a_notes, b_notes, 0); log_printf(" %d", portid, 0); #endif log_printf("\n", 0); } bnode = bnode->next; } return (rv); } static void display_sgsbbc_revisions(Board_node *bdlist) { Prom_node *pnode; int *int_val; int portid; char *model; char *status; int revision; int node_id; Board_node *bnode; #ifdef DEBUG char *slot_name; char notes[30]; char *value; #endif bnode = bdlist; while (bnode != NULL) { /* * search this board node for all sgsbbc's */ for (pnode = dev_find_node_by_type(bnode->nodes, "model", "SUNW,sgsbbc"); pnode != NULL; pnode = dev_next_node_by_type(pnode, "model", "SUNW,sgsbbc")) { char fru_name[MAX_FRU_NAME_LEN] = ""; /* * We need to go to this node's parent to * get a portid to tell us what board it is on */ int_val = (int *)get_prop_val (find_prop(pnode->parent, "portid")); if (int_val == NULL) continue; portid = *int_val; /* get the node-id */ node_id = SG_PORTID_TO_NODEID(portid); /* model */ model = (char *)get_prop_val (find_prop(pnode, "model")); /* status */ status = (char *)get_prop_val(find_prop (pnode, "status")); /* revision */ int_val = (int *)get_prop_val (find_prop(pnode, "revision-id")); if (int_val != NULL) revision = *int_val; else revision = -1; #ifdef DEBUG value = (char *)get_prop_val( find_prop(pnode->parent, "slot-names")); if (value != NULL) { /* Skip the 4 byte bitmask */ slot_name = (char *)value + sizeof (int); } else { strcpy(slot_name, "not_found"); } (void) sprintf(notes, "[%s] portid [%d]", slot_name, portid); #endif /* * Display the data */ /* FRU Name */ SG_SET_FRU_NAME_NODE(fru_name, node_id); SG_SET_FRU_NAME_IO_BOARD(fru_name, SG_IO_BD_PORTID_TO_BD_NUM(portid)); SG_SET_FRU_NAME_MODULE(fru_name, portid % 2); log_printf("%-12s", fru_name, 0); /* model */ if (model != NULL) log_printf("%-15s ", model, 0); else log_printf("%-15s ", "unknown", 0); /* portid */ log_printf("%-3d ", portid, 0); /* status */ if (status == (char *)NULL) log_printf(" ok ", 0); else log_printf(" fail ", 0); /* revision */ log_printf(" %-4d ", revision, 0); #ifdef DEBUG log_printf("%s", notes, 0); #endif log_printf("\n", 0); } bnode = bnode->next; } } /*ARGSUSED0*/ void display_hp_fail_fault(Sys_tree *tree, struct system_kstat_data *kstats) { serengeti_display_board_info(ACTIVE); serengeti_display_board_info(INACTIVE); } /* * display_failed_parts * * Display the failed parts in the system. This function looks for * the status property in all PROM nodes contained in the Sys_tree * passed in. */ int display_failed_parts(Sys_tree *tree) { int system_failed = 0; int bank_failed = 0; int schizo_failed = FALSE; int portid, nodeid, board; Board_node *bnode = tree->bd_list; Prom_node *pnode; int *coreid, *impl; print_flag = TRUE; /* * go through all of the OBP nodes looking for * failed units. */ while (bnode != NULL) { pnode = find_failed_node(bnode->nodes); if ((pnode != NULL) && !system_failed) { system_failed = TRUE; log_printf("\n", 0); log_printf(dgettext(TEXT_DOMAIN, "Failed Field Replaceable Units (FRU) in " "System:\n"), 0); log_printf("==========================" "====================\n", 0); } while (pnode != NULL) { void *status; char *name, *type, *model; char fru_name[MAX_FRU_NAME_LEN] = ""; status = get_prop_val(find_prop(pnode, "status")); name = get_node_name(pnode); /* sanity check of data retreived from PROM */ if ((status == NULL) || (name == NULL)) { pnode = next_failed_node(pnode); continue; } type = get_node_type(pnode); portid = get_id(pnode); model = (char *)get_prop_val (find_prop(pnode, "model")); /* * Determine whether FRU is CPU module, Mem Controller, * PCI card, schizo,xmits or sgsbbc. */ if ((model != NULL) && strstr(model, "sgsbbc")) { /* * sgsbbc / bootbus-controller */ portid = get_id(pnode->parent); nodeid = SG_PORTID_TO_NODEID(portid); board = SG_PORTID_TO_BOARD_NUM(portid); SG_SET_FRU_NAME_NODE(fru_name, nodeid); SG_SET_FRU_NAME_IO_BOARD(fru_name, board); SG_SET_FRU_NAME_MODULE(fru_name, portid % 2); log_printf("\tFailed Device : %s (%s)\n", model, name, 0); log_printf("\tLocation : %s\n", fru_name, 0); } else if (strstr(name, "pci") && (portid == -1)) { /* * PCI Bridge if name = pci and it doesn't * have a portid. */ portid = get_id(pnode->parent); nodeid = SG_PORTID_TO_NODEID(portid); board = SG_PORTID_TO_BOARD_NUM(portid); SG_SET_FRU_NAME_NODE(fru_name, nodeid); SG_SET_FRU_NAME_IO_BOARD(fru_name, board); SG_SET_FRU_NAME_MODULE(fru_name, portid % 2); log_printf("\tFRU type : ", 0); log_printf("PCI Bridge Device\n", 0); log_printf("\tLocation : %s\n", fru_name, 0); } else if ((type != NULL) && (strstr(type, "cpu") || strstr(type, "memory-controller"))) { /* * CPU or memory controller */ portid = get_id(pnode); /* * For cpu nodes that belong to a CMP, the * portid is stored in the parent "cmp" node. */ if (portid == -1) portid = get_id(pnode->parent); nodeid = SG_PORTID_TO_NODEID(portid); board = SG_PORTID_TO_BOARD_NUM(portid); SG_SET_FRU_NAME_NODE(fru_name, nodeid); SG_SET_FRU_NAME_CPU_BOARD(fru_name, board); SG_SET_FRU_NAME_MODULE(fru_name, portid % 4); log_printf("\tFRU type : ", 0); if (strstr(type, "memory-controller")) log_printf("Memory Controller on ", 0); log_printf("UltraSPARC module\n", 0); log_printf("\tLocation : %s\n", fru_name, 0); } else { /* * It should only be a PCI card if we get to * here but lets check to be sure. */ char *parents_model, *grandparents_model; Prom_node *parent_pnode; int pci_card_found = 0; if (pnode->parent != NULL) parent_pnode = pnode->parent; /* * Is our parent a schizo or xmits */ parents_model = (char *)get_prop_val (find_prop(pnode->parent, "model")); if ((parents_model != NULL) && (strstr(parents_model, "SUNW,schizo") || strstr(parents_model, "SUNW,xmits"))) { portid = get_id(pnode->parent); pci_card_found = TRUE; } /* * Is our grandparent a schizo xmits */ grandparents_model = (char *)get_prop_val (find_prop(parent_pnode->parent, "model")); if ((grandparents_model != NULL) && (strstr(grandparents_model, "SUNW,schizo") || strstr(grandparents_model, "SUNW,xmits"))) { portid = get_id(parent_pnode->parent); pci_card_found = TRUE; } if (pci_card_found) { nodeid = SG_PORTID_TO_NODEID(portid); board = SG_PORTID_TO_BOARD_NUM(portid); SG_SET_FRU_NAME_NODE(fru_name, nodeid); SG_SET_FRU_NAME_IO_BOARD(fru_name, board); SG_SET_FRU_NAME_MODULE(fru_name, portid % 2); log_printf("\tFRU type :", 0); log_printf(" PCI Card\n", 0); log_printf("\tLocation : %s\n", fru_name, 0); } } log_printf("\tPROM status: %s\n\n", status, 0); pnode = next_failed_node(pnode); } bnode = bnode->next; } bank_failed = display_us3_failed_banks(system_failed); schizo_failed = display_schizo_revisions(tree->bd_list, SG_SCHIZO_FAILED); if (system_failed || bank_failed || schizo_failed) return (1); else return (0); } /* * This routine displays the memory configuration for all boards in the * system. */ /*ARGSUSED0*/ void display_memoryconf(Sys_tree *tree, struct grp_info *grps) { Board_node *bnode = tree->bd_list; log_printf("========================= Memory Configuration" " ===============================\n", 0); log_printf("\n Logical Logical Logical ", 0); log_printf("\n Port Bank Bank Bank " "DIMM Interleave Interleave", 0); log_printf("\nFRU Name ID Num Size Status " "Size Factor Segment", 0); log_printf("\n------------- ---- ---- ------ ----------- " "------ ---------- ----------", 0); while (bnode != NULL) { if (get_us3_mem_regs(bnode)) { log_printf(dgettext(TEXT_DOMAIN, "\nFailed to get memory information.\n"), 0); return; } bnode = bnode->next; } /* Display what we have found */ display_us3_banks(); } /* * This function provides Serengeti's formatting of the memory config * information that get_us3_mem_regs() and display_us3_banks() code has * gathered. It overrides the generic print_us3_memory_line() code * which prints an error message. */ void print_us3_memory_line(int portid, int bank_id, uint64_t bank_size, char *bank_status, uint64_t dimm_size, uint32_t intlv, int seg_id) { int nodeid, board, mcid; char fru_name[MAX_FRU_NAME_LEN] = ""; mcid = SG_PORTID_TO_SAFARI_ID(portid); nodeid = SG_PORTID_TO_NODEID(portid); board = SG_PORTID_TO_BOARD_NUM(portid); SG_SET_FRU_NAME_NODE(fru_name, nodeid); SG_SET_FRU_NAME_CPU_BOARD(fru_name, board); SG_SET_FRU_NAME_MODULE(fru_name, mcid % 4); SG_SET_FRU_NAME_BANK(fru_name, (bank_id % 4) % 2); log_printf("\n%-13s %2d %2d %4lldMB %11-s %4lldMB " " %2d-way %d", fru_name, mcid, (bank_id % 4), bank_size, bank_status, dimm_size, intlv, seg_id, 0); } void print_us3_failed_memory_line(int portid, int bank_id, char *bank_status) { int nodeid, board, mcid; char fru_name[MAX_FRU_NAME_LEN] = ""; mcid = SG_PORTID_TO_SAFARI_ID(portid); nodeid = SG_PORTID_TO_NODEID(portid); board = SG_PORTID_TO_BOARD_NUM(portid); SG_SET_FRU_NAME_NODE(fru_name, nodeid); SG_SET_FRU_NAME_CPU_BOARD(fru_name, board); SG_SET_FRU_NAME_MODULE(fru_name, mcid % 4); SG_SET_FRU_NAME_BANK(fru_name, (bank_id % 4) % 2); log_printf("\tFRU type : ", 0); log_printf("Physical Memory Bank\n", 0); log_printf("\tLocation : %s (Logical Bank %2d)\n", fru_name, (bank_id %4), 0); log_printf("\tPROM status: %s\n\n", bank_status, 0); } /* * Find the requested board struct in the system device tree. * * This function overrides the functionality of the generic find_board() * function in libprtdiag, but since we need to pass another parameter, * we cannot simply overlay the symbol table. */ static Board_node * serengeti_find_board(Sys_tree *root, int board, int nodeid) { Board_node *bnode = root->bd_list; while ((bnode != NULL) && ((board != bnode->board_num) || (nodeid != bnode->node_id))) { bnode = bnode->next; } return (bnode); } /* * Add a board to the system list in order (sorted by NodeID then board#). * Initialize all pointer fields to NULL. */ static Board_node * serengeti_insert_board(Sys_tree *root, int board, int nodeid) { Board_node *bnode; Board_node *temp = root->bd_list; if ((bnode = (Board_node *) malloc(sizeof (Board_node))) == NULL) { perror("malloc"); exit(1); } bnode->nodes = NULL; bnode->next = NULL; bnode->board_num = board; bnode->node_id = nodeid; bnode->board_type = UNKNOWN_BOARD; if (temp == NULL) root->bd_list = bnode; else if ((temp->board_num > board) && (temp->node_id >= nodeid)) { bnode->next = temp; root->bd_list = bnode; } else { while ((temp->next != NULL) && ((board > temp->next->board_num) || (nodeid > temp->node_id))) temp = temp->next; bnode->next = temp->next; temp->next = bnode; } root->board_cnt++; return (bnode); } /* * We call do_devinfo() in order to use the libdevinfo device tree * instead of OBP's device tree. */ int do_prominfo(int syserrlog, char *pgname, int log_flag, int prt_flag) { return (do_devinfo(syserrlog, pgname, log_flag, prt_flag)); } /* * return the property value for the Prop passed in depending on * which tree (OBP/DEVINFO) is being used. */ void * get_prop_val(Prop *prop) { if (prop == NULL) return (NULL); /* Check which tree is being used. */ if (tree == DEVINFO_TREE) return ((void *)(prop->value.val_ptr)); else { if (prop->value.opp.holds_array) return ((void *)(prop->value.opp.oprom_array)); else return ((void *)(&prop->value.opp.oprom_node[0])); } } /* * Search a Prom node and retrieve the property with the correct * name depending on which tree (OBP/DEVINFO) is being used. */ Prop * find_prop(Prom_node *pnode, char *name) { Prop *prop; if (pnode == NULL) return (NULL); if (pnode->props == NULL) return (NULL); prop = pnode->props; /* Check which tree is being used. */ if (tree == DEVINFO_TREE) { while ((prop != NULL) && (strcmp((char *)(prop->name.val_ptr), name))) prop = prop->next; } else { while ((prop != NULL) && (strcmp((char *) (prop->name.opp.oprom_array), name))) prop = prop->next; } return (prop); } /* * This function searches through the properties of the node passed in * and returns a pointer to the value of the name property * depending on which tree (OBP/DEVINFO) is being used. */ char * get_node_name(Prom_node *pnode) { Prop *prop; if (pnode == NULL) return (NULL); prop = pnode->props; while (prop != NULL) { /* Check which tree is being used. */ if (tree == DEVINFO_TREE) { if (strcmp("name", (char *)prop->name.val_ptr) == 0) return ((char *)prop->value.val_ptr); } else { if (strcmp("name", prop->name.opp.oprom_array) == 0) return (prop->value.opp.oprom_array); } prop = prop->next; } return (NULL); } /* * This function searches through the properties of the node passed in * and returns a pointer to the value of the device_type property * depending on which tree (OBP/DEVINFO) is being used. */ char * get_node_type(Prom_node *pnode) { Prop *prop; if (pnode == NULL) return (NULL); prop = pnode->props; while (prop != NULL) { /* Check which tree is being used. */ if (tree == DEVINFO_TREE) { if (strcmp("device_type", (char *)prop->name.val_ptr) == 0) return ((char *)prop->value.val_ptr); } else { if (strcmp("device_type", prop->name.opp.oprom_array) == 0) return (prop->value.opp.oprom_array); } prop = prop->next; } return (NULL); } /* * Take a snapshot of the OBP device tree and walk this snapshot * to find all failed HW (ie. devices with a status property of * 'fail'). Call display_failed_parts() to display the failed HW. */ void get_failed_parts(void) { int system_failed = 0; Sys_tree obp_sys_tree; /* system information */ /* set the the system tree fields */ obp_sys_tree.sys_mem = NULL; obp_sys_tree.boards = NULL; obp_sys_tree.bd_list = NULL; obp_sys_tree.board_cnt = 0; if (promopen(O_RDONLY)) { (void) fprintf(stderr, "%s", dgettext(TEXT_DOMAIN, "openprom device " "open failed")); return; } if ((is_openprom() == 0) || (next(0) == 0)) { (void) fprintf(stderr, "%s", dgettext(TEXT_DOMAIN, "openprom device " "error encountered.")); return; } tree = OBP_TREE; /* Switch to the OBP tree */ (void) walk(&obp_sys_tree, NULL, next(0)); system_failed = display_failed_parts(&obp_sys_tree); if (!system_failed) { log_printf(dgettext(TEXT_DOMAIN, "No Hardware failures found in System\n"), 0); } promclose(); tree = DEVINFO_TREE; /* Switch back to the DEVINFO tree */ } /* * get_slot_name figures out the slot no. for the card. In the case of * XMITS slots 2 & 3 and slots 6 & 7 are reversed in slot_name by OBP * so we need to cater for this to correctly identify the slot no. */ static void get_slot_name(struct io_card *card, char *slot_name) { char tmp_ptr[2]; if (strlen(slot_name) != 0) { if (strcmp(card->notes, XMITS_COMPATIBLE) == 0) { (void) sprintf(tmp_ptr, "%c", slot_name[strlen(slot_name) -1]); switch (tmp_ptr[0]) { case '2': (void) sprintf(card->slot_str, "%c", '3'); break; case '3': (void) sprintf(card->slot_str, "%c", '2'); break; case '6': (void) sprintf(card->slot_str, "%c", '7'); break; case '7': (void) sprintf(card->slot_str, "%c", '6'); break; default: (void) sprintf(card->slot_str, "%c", slot_name[strlen(slot_name) -1]); } } else (void) sprintf(card->slot_str, "%c", slot_name[strlen(slot_name) -1]); } else (void) sprintf(card->slot_str, "-"); }