# # CDDL HEADER START # # The contents of this file are subject to the terms of the # Common Development and Distribution License (the "License"). # You may not use this file except in compliance with the License. # # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE # or http://www.opensolaris.org/os/licensing. # See the License for the specific language governing permissions # and limitations under the License. # # When distributing Covered Code, include this CDDL HEADER in each # file and include the License file at usr/src/OPENSOLARIS.LICENSE. # If applicable, add the following below this CDDL HEADER, with the # fields enclosed by brackets "[]" replaced with your own identifying # information: Portions Copyright [yyyy] [name of copyright owner] # # CDDL HEADER END # # # Copyright 2008 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # # ident "%Z%%M% %I% %E% SMI" # LIBCBASE=. LIBRARY= libc.a LIB_PIC= libc_pic.a VERS= .1 CPP= /usr/lib/cpp TARGET_ARCH= sparc # objects are grouped by source directory # local objects STRETS= CRTOBJS= \ __align_cpy_2.o \ __align_cpy_4.o \ __align_cpy_8.o \ _ftou.o \ cerror.o DYNOBJS= FPOBJS= \ _D_cplx_div.o \ _D_cplx_div_ix.o \ _D_cplx_div_rx.o \ _D_cplx_mul.o \ _F_cplx_div.o \ _F_cplx_div_ix.o \ _F_cplx_div_rx.o \ _F_cplx_mul.o \ _Q_add.o \ _Q_cmp.o \ _Q_cmpe.o \ _Q_cplx_div.o \ _Q_cplx_div_ix.o \ _Q_cplx_div_rx.o \ _Q_cplx_lr_div.o \ _Q_cplx_lr_div_ix.o \ _Q_cplx_lr_div_rx.o \ _Q_cplx_lr_mul.o \ _Q_cplx_mul.o \ _Q_div.o \ _Q_dtoq.o \ _Q_fcc.o \ _Q_itoq.o \ _Q_mul.o \ _Q_neg.o \ _Q_qtod.o \ _Q_qtoi.o \ _Q_qtos.o \ _Q_qtou.o \ _Q_scl.o \ _Q_sqrt.o \ _Q_stoq.o \ _Q_sub.o \ _Q_utoq.o FPOBJS64= \ _Qp_qtox.o \ _Qp_qtoux.o \ _Qp_xtoq.o \ _Qp_uxtoq.o \ __dtoul.o \ __ftoul.o FPASMOBJS= \ _Q_get_rp_rd.o \ __quad_mag64.o \ fpgetmask.o \ fpgetrnd.o \ fpgetsticky.o \ fpsetmask.o \ fpsetrnd.o \ fpsetsticky.o $(__GNUC)FPASMOBJS += \ __quad.o ATOMICOBJS= \ atomic.o XATTROBJS= \ xattr_common.o COMOBJS= \ bcmp.o \ bcopy.o \ bsearch.o \ bzero.o \ ffs.o \ memccpy.o \ qsort.o \ strtol.o \ strtoul.o GENOBJS= \ _getsp.o \ _xregs_clrptr.o \ abs.o \ alloca.o \ byteorder.o \ cuexit.o \ ecvt.o \ getctxt.o \ lexp10.o \ llog10.o \ lock.o \ makectxt.o \ memchr.o \ memcmp.o \ memcpy.o \ memmove.o \ memset.o \ new_list.o \ setjmp.o \ siginfolst.o \ siglongjmp.o \ sparc_data.o \ strcasecmp.o \ strchr.o \ strcmp.o \ strcpy.o \ strlcpy.o \ strlen.o \ strncmp.o \ strncpy.o \ strnlen.o \ swapctxt.o \ sync_instruction_memory.o # Preserved solely to ease maintenance of 32-bit and 64-bit library builds # This macro should ALWAYS be empty; native APIs are already 'large file'. COMSYSOBJS64= SYSOBJS64= COMSYSOBJS= \ __clock_timer.o \ __getloadavg.o \ __rusagesys.o \ __signotify.o \ __sigrt.o \ __time.o \ _lgrp_home_fast.o \ _lgrpsys.o \ _nfssys.o \ _portfs.o \ _pset.o \ _rpcsys.o \ _sigaction.o \ _so_accept.o \ _so_bind.o \ _so_connect.o \ _so_getpeername.o \ _so_getsockname.o \ _so_getsockopt.o \ _so_listen.o \ _so_recv.o \ _so_recvfrom.o \ _so_recvmsg.o \ _so_send.o \ _so_sendmsg.o \ _so_sendto.o \ _so_setsockopt.o \ _so_shutdown.o \ _so_socket.o \ _so_socketpair.o \ _sockconfig.o \ access.o \ acct.o \ acl.o \ adjtime.o \ alarm.o \ brk.o \ chdir.o \ chmod.o \ chown.o \ chroot.o \ cladm.o \ close.o \ creat.o \ dup.o \ execve.o \ exit.o \ facl.o \ fchdir.o \ fchmod.o \ fchown.o \ fchroot.o \ fcntl.o \ fdsync.o \ fpathconf.o \ fstat.o \ fstatfs.o \ fstatvfs.o \ getcpuid.o \ getdents.o \ getegid.o \ geteuid.o \ getgid.o \ getgroups.o \ gethrtime.o \ getitimer.o \ getmsg.o \ getpid.o \ getpmsg.o \ getppid.o \ getrlimit.o \ getuid.o \ gtty.o \ install_utrap.o \ ioctl.o \ kaio.o \ kill.o \ lchown.o \ link.o \ llseek.o \ lseek.o \ lstat.o \ memcntl.o \ mincore.o \ mkdir.o \ mknod.o \ mmap.o \ modctl.o \ mount.o \ mprotect.o \ munmap.o \ nice.o \ ntp_adjtime.o \ ntp_gettime.o \ open.o \ p_online.o \ pathconf.o \ pause.o \ pcsample.o \ pollsys.o \ pread.o \ priocntlset.o \ processor_bind.o \ processor_info.o \ profil.o \ putmsg.o \ putpmsg.o \ pwrite.o \ read.o \ readlink.o \ readv.o \ rename.o \ resolvepath.o \ rmdir.o \ seteguid.o \ setgid.o \ setgroups.o \ setitimer.o \ setreid.o \ setrlimit.o \ setuid.o \ sigaltstk.o \ sigprocmsk.o \ sigsendset.o \ sigsuspend.o \ stat.o \ statfs.o \ statvfs.o \ stty.o \ symlink.o \ sync.o \ sysconfig.o \ sysfs.o \ sysinfo.o \ syslwp.o \ times.o \ ulimit.o \ umask.o \ umount2.o \ unlink.o \ utime.o \ utimes.o \ utssys.o \ uucopy.o \ vhangup.o \ waitid.o \ write.o \ writev.o \ yield.o SYSOBJS= \ __clock_gettime.o \ __getcontext.o \ _lwp_mutex_unlock.o \ _stack_grow.o \ door.o \ forkx.o \ forkallx.o \ gettimeofday.o \ pipe.o \ sparc_utrap_install.o \ syscall.o \ tls_get_addr.o \ uadmin.o \ umount.o \ uname.o \ vforkx.o # Preserved solely to ease maintenance of 32-bit and 64-bit library builds # This macro should ALWAYS be empty; native APIs are already 'large file'. PORTGEN64= # objects from source under ../port PORTFP= \ __flt_decim.o \ __flt_rounds.o \ __tbl_10_b.o \ __tbl_10_h.o \ __tbl_10_s.o \ __tbl_2_b.o \ __tbl_2_h.o \ __tbl_2_s.o \ __tbl_fdq.o \ __tbl_tens.o \ __x_power.o \ _base_sup.o \ aconvert.o \ decimal_bin.o \ double_decim.o \ econvert.o \ fconvert.o \ file_decim.o \ finite.o \ fp_data.o \ func_decim.o \ gconvert.o \ hex_bin.o \ ieee_globals.o \ pack_float.o \ sigfpe.o \ string_decim.o PORTGEN= \ _env_data.o \ _xftw.o \ a64l.o \ abort.o \ addsev.o \ assert.o \ attrat.o \ atof.o \ atoi.o \ atol.o \ atoll.o \ attropen.o \ atexit.o \ atfork.o \ basename.o \ calloc.o \ catgets.o \ catopen.o \ cfgetispeed.o \ cfgetospeed.o \ cfree.o \ cfsetispeed.o \ cfsetospeed.o \ cftime.o \ clock.o \ closedir.o \ closefrom.o \ confstr.o \ crypt.o \ csetlen.o \ ctime.o \ ctime_r.o \ deflt.o \ directio.o \ dirname.o \ div.o \ drand48.o \ dup2.o \ env_data.o \ err.o \ errno.o \ euclen.o \ event_port.o \ execvp.o \ fattach.o \ fdetach.o \ fdopendir.o \ fmtmsg.o \ ftime.o \ ftok.o \ ftw.o \ gcvt.o \ getauxv.o \ getcwd.o \ getdate_err.o \ getdtblsize.o \ getenv.o \ getexecname.o \ getgrnam.o \ getgrnam_r.o \ gethostid.o \ gethostname.o \ gethz.o \ getisax.o \ getloadavg.o \ getlogin.o \ getmntent.o \ getnetgrent.o \ getopt.o \ getopt_long.o \ getpagesize.o \ getpw.o \ getpwnam.o \ getpwnam_r.o \ getrusage.o \ getspent.o \ getspent_r.o \ getsubopt.o \ gettxt.o \ getusershell.o \ getut.o \ getutx.o \ getvfsent.o \ getwd.o \ getwidth.o \ getxby_door.o \ gtxt.o \ hsearch.o \ iconv.o \ imaxabs.o \ imaxdiv.o \ index.o \ initgroups.o \ insque.o \ isaexec.o \ isastream.o \ isatty.o \ killpg.o \ l64a.o \ lckpwdf.o \ lconstants.o \ ldivide.o \ lfind.o \ lfmt.o \ lfmt_log.o \ lldiv.o \ lltostr.o \ lmath.o \ localtime.o \ lsearch.o \ madvise.o \ malloc.o \ memalign.o \ mkdev.o \ mkdtemp.o \ mkfifo.o \ mkstemp.o \ mktemp.o \ mlock.o \ mlockall.o \ mon.o \ msync.o \ munlock.o \ munlockall.o \ ndbm.o \ nftw.o \ nlspath_checks.o \ nsparse.o \ nss_common.o \ nss_dbdefs.o \ nss_deffinder.o \ opendir.o \ opt_data.o \ perror.o \ pfmt.o \ pfmt_data.o \ pfmt_print.o \ plock.o \ poll.o \ priocntl.o \ privlib.o \ priv_str_xlate.o \ psiginfo.o \ psignal.o \ pt.o \ putpwent.o \ putspent.o \ raise.o \ rand.o \ random.o \ rctlops.o \ readdir.o \ readdir_r.o \ realpath.o \ reboot.o \ regexpr.o \ remove.o \ rewinddir.o \ rindex.o \ scandir.o \ seekdir.o \ select.o \ setlabel.o \ setpriority.o \ settimeofday.o \ sh_locks.o \ sigflag.o \ siglist.o \ sigsend.o \ sigsetops.o \ ssignal.o \ stack.o \ str2sig.o \ strcase_charmap.o \ strcat.o \ strcspn.o \ strdup.o \ strerror.o \ strncat.o \ strlcat.o \ strncasecmp.o \ strpbrk.o \ strrchr.o \ strsignal.o \ strspn.o \ strstr.o \ strtod.o \ strtoimax.o \ strtok.o \ strtok_r.o \ strtoll.o \ strtoull.o \ strtoumax.o \ swab.o \ swapctl.o \ sysconf.o \ syslog.o \ tcdrain.o \ tcflow.o \ tcflush.o \ tcgetattr.o \ tcgetpgrp.o \ tcgetsid.o \ tcsendbreak.o \ tcsetattr.o \ tcsetpgrp.o \ tell.o \ telldir.o \ tfind.o \ time_data.o \ time_gdata.o \ truncate.o \ tsdalloc.o \ tsearch.o \ ttyname.o \ ttyslot.o \ ualarm.o \ ucred.o \ valloc.o \ vlfmt.o \ vpfmt.o \ waitpid.o \ walkstack.o \ wdata.o \ xgetwidth.o \ xpg4.o \ xpg6.o PORTPRINT_W= \ doprnt_w.o PORTPRINT= \ doprnt.o \ fprintf.o \ printf.o \ snprintf.o \ sprintf.o \ vfprintf.o \ vprintf.o \ vsnprintf.o \ vsprintf.o \ vwprintf.o \ wprintf.o # Preserved solely to ease maintenance of 32-bit and 64-bit library builds # This macro should ALWAYS be empty; native APIs are already 'large file'. PORTSTDIO64= PORTSTDIO_W= \ doscan_w.o PORTSTDIO= \ __extensions.o \ _endopen.o \ _filbuf.o \ _findbuf.o \ _flsbuf.o \ _wrtchk.o \ clearerr.o \ ctermid.o \ ctermid_r.o \ cuserid.o \ data.o \ doscan.o \ fdopen.o \ feof.o \ ferror.o \ fgetc.o \ fgets.o \ fileno.o \ flockf.o \ flush.o \ fopen.o \ fpos.o \ fputc.o \ fputs.o \ fread.o \ fseek.o \ fseeko.o \ ftell.o \ ftello.o \ fwrite.o \ getc.o \ getchar.o \ getpass.o \ gets.o \ getw.o \ popen.o \ putc.o \ putchar.o \ puts.o \ putw.o \ rewind.o \ scanf.o \ setbuf.o \ setbuffer.o \ setvbuf.o \ system.o \ tempnam.o \ tmpfile.o \ tmpnam_r.o \ ungetc.o \ mse.o \ vscanf.o \ vwscanf.o \ wscanf.o PORTI18N= \ __fgetwc_xpg5.o \ __fgetws_xpg5.o \ __fputwc_xpg5.o \ __fputws_xpg5.o \ __ungetwc_xpg5.o \ getwchar.o \ putwchar.o \ putws.o \ strtows.o \ wcstoimax.o \ wcstol.o \ wcstoul.o \ wcswcs.o \ wscasecmp.o \ wscat.o \ wschr.o \ wscmp.o \ wscpy.o \ wscspn.o \ wsdup.o \ wslen.o \ wsncasecmp.o \ wsncat.o \ wsncmp.o \ wsncpy.o \ wspbrk.o \ wsprintf.o \ wsrchr.o \ wsscanf.o \ wsspn.o \ wstod.o \ wstok.o \ wstol.o \ wstoll.o \ wsxfrm.o \ wmemchr.o \ wmemcmp.o \ wmemcpy.o \ wmemmove.o \ wmemset.o \ wcsstr.o \ gettext.o \ gettext_real.o \ gettext_util.o \ gettext_gnu.o \ plural_parser.o \ wdresolve.o \ _ctype.o \ isascii.o \ toascii.o PORTI18N_COND= \ wcstol_longlong.o \ wcstoul_longlong.o AIOOBJS= \ aio.o \ aio_alloc.o \ posix_aio.o RTOBJS= \ clock_timer.o \ fallocate.o \ mqueue.o \ pos4obj.o \ sched.o \ sem.o \ shm.o \ sigev_thread.o TPOOLOBJS= \ thread_pool.o THREADSOBJS= \ alloc.o \ assfail.o \ cancel.o \ door_calls.o \ pthr_attr.o \ pthr_barrier.o \ pthr_cond.o \ pthr_mutex.o \ pthr_rwlock.o \ pthread.o \ rtsched.o \ rwlock.o \ scalls.o \ sema.o \ sigaction.o \ spawn.o \ synch.o \ tdb_agent.o \ thr.o \ thread_interface.o \ tls.o \ tsd.o THREADSMACHOBJS= \ machdep.o THREADSASMOBJS= \ asm_subr.o UNICODEOBJS= \ u8_textprep.o \ uconv.o UNWINDMACHOBJS= \ unwind.o UNWINDASMOBJS= \ unwind_frame.o # Preserved solely to ease maintenance of 32-bit and 64-bit library builds # This macro should ALWAYS be empty; native APIs are already 'large file'. PORTSYS64= PORTSYS= \ _autofssys.o \ acctctl.o \ bsd_signal.o \ corectl.o \ exacctsys.o \ execl.o \ execle.o \ execv.o \ faccessat.o \ fsmisc.o \ fstatat.o \ getpagesizes.o \ getpeerucred.o \ inst_sync.o \ issetugid.o \ label.o \ libc_fcntl.o \ libc_link.o \ libc_open.o \ lockf.o \ lwp.o \ lwp_cond.o \ lwp_rwlock.o \ lwp_sigmask.o \ meminfosys.o \ msgsys.o \ nfssys.o \ openat.o \ pgrpsys.o \ posix_sigwait.o \ ppriv.o \ psetsys.o \ rctlsys.o \ sbrk.o \ semsys.o \ set_errno.o \ sharefs.o \ shmsys.o \ sidsys.o \ siginterrupt.o \ signal.o \ sigpending.o \ sigstack.o \ tasksys.o \ time.o \ time_util.o \ ucontext.o \ ustat.o \ zone.o PORTREGEX= \ glob.o \ regcmp.o \ regex.o \ wordexp.o VALUES= values-Xa.o MOSTOBJS= \ $(STRETS) \ $(CRTOBJS) \ $(DYNOBJS) \ $(FPOBJS) \ $(FPOBJS64) \ $(FPASMOBJS) \ $(ATOMICOBJS) \ $(XATTROBJS) \ $(COMOBJS) \ $(GENOBJS) \ $(PORTFP) \ $(PORTGEN) \ $(PORTGEN64) \ $(PORTI18N) \ $(PORTI18N_COND) \ $(PORTPRINT) \ $(PORTPRINT_W) \ $(PORTREGEX) \ $(PORTSTDIO) \ $(PORTSTDIO64) \ $(PORTSTDIO_W) \ $(PORTSYS) \ $(PORTSYS64) \ $(AIOOBJS) \ $(RTOBJS) \ $(TPOOLOBJS) \ $(THREADSOBJS) \ $(THREADSMACHOBJS) \ $(THREADSASMOBJS) \ $(UNICODEOBJS) \ $(UNWINDMACHOBJS) \ $(UNWINDASMOBJS) \ $(COMSYSOBJS) \ $(SYSOBJS) \ $(COMSYSOBJS64) \ $(SYSOBJS64) \ $(VALUES) TRACEOBJS= \ plockstat.o # NOTE: libc.so.1 must be linked with the minimal crti.o and crtn.o # modules whose source is provided in the $(SRC)/lib/common directory. # This must be done because otherwise the Sun C compiler would insert # its own versions of these modules and those versions contain code # to call out to C++ initialization functions. Such C++ initialization # functions can call back into libc before thread initialization is # complete and this leads to segmentation violations and other problems. # Since libc contains no C++ code, linking with the minimal crti.o and # crtn.o modules is safe and avoids the problems described above. OBJECTS= $(CRTI) $(MOSTOBJS) $(CRTN) CRTSRCS= ../../common/sparcv9 # include common library definitions include ../../Makefile.lib include ../../Makefile.lib.64 # NOTE: libc_i18n.a will be part of libc.so.1. Therefore, the compilation # conditions such as the settings of CFLAGS and CPPFLAGS for the libc_i18n stuff # need to be compatible with the ones for the libc stuff. Whenever the changes # that affect the compilation conditions of libc happened, those for libc_i18n # also need to be updated. CFLAGS64 += $(CCVERBOSE) # This is necessary to avoid problems with calling _ex_unwind(). # We probably don't want any inlining anyway. CFLAGS64 += -xinline= # Setting THREAD_DEBUG = -DTHREAD_DEBUG (make THREAD_DEBUG=-DTHREAD_DEBUG ...) # enables ASSERT() checking in the threads portion of the library. # This is automatically enabled for DEBUG builds, not for non-debug builds. THREAD_DEBUG = $(NOT_RELEASE_BUILD)THREAD_DEBUG = -DTHREAD_DEBUG CFLAGS64 += $(THREAD_DEBUG) ALTPICS= $(TRACEOBJS:%=pics/%) $(DYNLIB) := PICS += $(ROOTFS_LIBDIR64)/libc_i18n.a $(DYNLIB) := BUILD.SO = $(LD) -o $@ -G $(DYNFLAGS) $(PICS) $(ALTPICS) MAPFILES = ../port/mapfile-vers mapfile-vers sparcv9_C_PICFLAGS= -K PIC CFLAGS64 += $(EXTN_CFLAGS) CPPFLAGS= -D_REENTRANT -Dsparc $(EXTN_CPPFLAGS) \ -I$(LIBCBASE)/inc -I../inc $(CPPFLAGS.master) ASFLAGS= -K PIC -P -D__STDC__ -D_ASM -D__sparcv9 $(CPPFLAGS) \ $(sparcv9_AS_XARCH) # Conditionally add support for making |wordexp()| check whether # /usr/bin/ksh is ksh93 or not include ../../../Makefile.ksh93switch CPPFLAGS += -DWORDEXP_KSH93=$(ON_BUILD_KSH93_AS_BINKSH) # Inform the run-time linker about libc specialized initialization RTLDINFO = -z rtldinfo=tls_rtldinfo DYNFLAGS += $(RTLDINFO) DYNFLAGS += $(EXTN_DYNFLAGS) BUILD.s= $(AS) $(ASFLAGS) $< -o $@ # Override this top level flag so the compiler builds in its native # C99 mode. This has been enabled to support the complex arithmetic # added to libc. C99MODE= $(C99_ENABLE) # libc method of building an archive BUILD.AR= $(RM) $@ ; \ $(AR) q $@ `$(LORDER) $(MOSTOBJS:%=$(DIR)/%)| $(TSORT)` # extra files for the clean target CLEANFILES= \ ../port/gen/errlst.c \ ../port/gen/new_list.c \ assym.h \ genassym \ pics/crti.o \ pics/crtn.o \ $(ALTPICS) CLOBBERFILES += $(LIB_PIC) # list of C source for lint SRCS= \ $(ATOMICOBJS:%.o=$(SRC)/common/atomic/%.c) \ $(XATTROBJS:%.o=$(SRC)/common/xattr/%.c) \ $(COMOBJS:%.o=$(SRC)/common/util/%.c) \ $(PORTFP:%.o=../port/fp/%.c) \ $(PORTGEN:%.o=../port/gen/%.c) \ $(PORTI18N:%.o=../port/i18n/%.c) \ $(PORTPRINT:%.o=../port/print/%.c) \ $(PORTREGEX:%.o=../port/regex/%.c) \ $(PORTSTDIO:%.o=../port/stdio/%.c) \ $(PORTSYS:%.o=../port/sys/%.c) \ $(AIOOBJS:%.o=../port/aio/%.c) \ $(RTOBJS:%.o=../port/rt/%.c) \ $(TPOOLOBJS:%.o=../port/tpool/%.c) \ $(THREADSOBJS:%.o=../port/threads/%.c) \ $(THREADSMACHOBJS:%.o=../$(MACH)/threads/%.c) \ $(UNICODEOBJS:%.o=$(SRC)/common/unicode/%.c) \ $(UNWINDMACHOBJS:%.o=../port/unwind/%.c) \ $(FPOBJS:%.o=../$(MACH)/fp/%.c) \ $(FPOBJS64:%.o=$(LIBCBASE)/fp/%.c) \ $(LIBCBASE)/crt/_ftou.c \ $(LIBCBASE)/gen/_xregs_clrptr.c \ $(LIBCBASE)/gen/byteorder.c \ $(LIBCBASE)/gen/ecvt.c \ $(LIBCBASE)/gen/getctxt.c \ $(LIBCBASE)/gen/lexp10.c \ $(LIBCBASE)/gen/llog10.c \ $(LIBCBASE)/gen/makectxt.c \ $(LIBCBASE)/gen/siginfolst.c \ $(LIBCBASE)/gen/siglongjmp.c \ $(LIBCBASE)/gen/swapctxt.c # conditional assignments $(DYNLIB) := CRTI = crti.o $(DYNLIB) := CRTN = crtn.o # Files which need the threads .il inline template TIL= \ aio.o \ alloc.o \ assfail.o \ atexit.o \ atfork.o \ cancel.o \ door_calls.o \ errno.o \ getctxt.o \ lwp.o \ ma.o \ machdep.o \ posix_aio.o \ pthr_attr.o \ pthr_barrier.o \ pthr_cond.o \ pthr_mutex.o \ pthr_rwlock.o \ pthread.o \ rand.o \ rtsched.o \ rwlock.o \ scalls.o \ sema.o \ sigaction.o \ sigev_thread.o \ spawn.o \ stack.o \ swapctxt.o \ synch.o \ tdb_agent.o \ thr.o \ thread_interface.o \ thread_pool.o \ tls.o \ tsd.o \ unwind.o $(TIL:%=pics/%) := CFLAGS64 += $(LIBCBASE)/threads/sparcv9.il # Files in fp, port/fp subdirectories that need base.il inline template IL= \ __flt_decim.o \ decimal_bin.o $(IL:%=pics/%) := CFLAGS64 += $(LIBCBASE)/fp/base.il # Files in fp subdirectory which need __quad.il inline template QIL= \ _Q_add.o \ _Q_cmp.o \ _Q_cmpe.o \ _Q_div.o \ _Q_dtoq.o \ _Q_fcc.o \ _Q_mul.o \ _Q_qtod.o \ _Q_qtoi.o \ _Q_qtos.o \ _Q_qtou.o \ _Q_sqrt.o \ _Q_stoq.o \ _Q_sub.o \ _Qp_qtox.o \ _Qp_qtoux.o $(QIL:%=pics/%) := CFLAGS64 += ../$(MACH)/fp/__quad.il pics/_Qp%.o := CFLAGS64 += -I../$(MACH)/fp pics/_Q%.o := sparcv9_COPTFLAG = -xO4 -xchip=ultra # Files in crt subdirectory which need muldiv64.il inline template #CIL= mul64.o divrem64.o #$(CIL:%=pics/%) := CFLAGS += $(LIBCBASE)/crt/mul64.il # large-file-aware components that should be built large #$(COMSYSOBJS64:%=pics/%) := \ # CPPFLAGS += -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 #$(SYSOBJS64:%=pics/%) := \ # CPPFLAGS += -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 #$(PORTGEN64:%=pics/%) := \ # CPPFLAGS += -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 #$(PORTSTDIO64:%=pics/%) := \ # CPPFLAGS += -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 #$(PORTSYS64:%=pics/%) := \ # CPPFLAGS += -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(PORTSTDIO_W:%=pics/%) := \ CPPFLAGS += -D_WIDE $(PORTPRINT_W:%=pics/%) := \ CPPFLAGS += -D_WIDE $(PORTI18N_COND:%=pics/%) := \ CPPFLAGS += -D_WCS_LONGLONG # Files which need extra optimization pics/getenv.o := sparcv9_COPTFLAG = -xO4 .KEEP_STATE: all: $(LIBS) $(LIB_PIC) lint := CPPFLAGS += -I../$(MACH)/fp lint := CPPFLAGS += -D_MSE_INT_H -D_LCONV_C99 lint := LINTFLAGS64 += -mn lint: @echo $(LINT.c) ... $(LDLIBS) @$(LINT.c) $(SRCS) $(LDLIBS) $(LINTLIB):= SRCS=../port/llib-lc $(LINTLIB):= CPPFLAGS += -D_MSE_INT_H $(LINTLIB):= LINTFLAGS64=-nvx -Xarch=v9 # object files that depend on inline template $(TIL:%=pics/%): $(LIBCBASE)/threads/sparcv9.il $(IL:%=pics/%): $(LIBCBASE)/fp/base.il $(QIL:%=pics/%): ../$(MACH)/fp/__quad.il #$(CIL:%=pics/%): $(LIBCBASE)/crt/muldiv64.il # include common libc targets include ../Makefile.targ # We need to strip out all CTF and DOF data from the static library $(LIB_PIC) := DIR = pics $(LIB_PIC): pics $$(PICS) $(BUILD.AR) $(MCS) -d -n .SUNW_ctf $@ > /dev/null 2>&1 $(MCS) -d -n .SUNW_dof $@ > /dev/null 2>&1 $(AR) -ts $@ > /dev/null $(POST_PROCESS_A) # special cases #$(STRETS:%=pics/%): crt/stret.s # $(AS) $(ASFLAGS) -DSTRET$(@F:stret%.o=%) crt/stret.s -o $@ # $(POST_PROCESS_O) #crt/_rtbootld.s: crt/_rtboot.s crt/_rtld.c # $(CC) $(CPPFLAGS) -O -S -K pic crt/_rtld.c -o crt/_rtld.s # $(CAT) crt/_rtboot.s crt/_rtld.s > $@ # $(RM) crt/_rtld.s ASSYMDEP_OBJS= \ _lwp_mutex_unlock.o \ _stack_grow.o \ asm_subr.o \ tls_get_addr.o \ unwind_frame.o \ vforkx.o $(ASSYMDEP_OBJS:%=pics/%) := CPPFLAGS += -I. $(ASSYMDEP_OBJS:%=pics/%): assym.h # assym.h build rules GENASSYM_C = ../$(MACH)/genassym.c # XXX A hack. Perhaps this should be 'CPPFLAGS.native' and # live in Makefile.master CPPFLAGS.genassym = \ $(ENVCPPFLAGS1) $(ENVCPPFLAGS2) $(ENVCPPFLAGS3) $(ENVCPPFLAGS4) genassym: $(GENASSYM_C) $(NATIVECC) -I$(LIBCBASE)/inc -I../inc \ $(CPPFLAGS.genassym) -o $@ $(GENASSYM_C) OFFSETS = ../$(MACH)/offsets.in assym.h: $(OFFSETS) genassym $(OFFSETS_CREATE) <$(OFFSETS) >$@ ./genassym >>$@ # derived C source and related explicit dependencies ../port/gen/new_list.c: ../port/gen/errlist ../port/gen/errlist.awk cd ../port/gen; pwd; $(AWK) -f errlist.awk < errlist pics/new_list.o: ../port/gen/new_list.c