#!/usr/bin/perl -w
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#

#
# The fan topologies can be quite complicated, but are ultimately regular.  This
# perl file uses some simplified internal structures to generate an .xml file
# without the maintenance overhead.
#

use Getopt::Std;
use strict;

#
# Master table of platforms.
#
my @platforms = (
    #
    # Galaxy 1/2 platforms.
    #
    # These systems have 2 fan-connector boards.  Each fan-connector board has 3
    # fan modules.  Each fan module is an individual FRU.  The fan-connector
    # boards are also FRUs.
    #
    {
	set => "Sun-Fire-X4100-Server|Sun-Fire-X4200-Server|" .
	    "Sun-Fire-X4100-M2|Sun-Fire-X4200-M2",
	topology => [
	    {
		label => "FT %d",
		count => 2,
		fru => "self"
	    }, {
	        fac_enum => 1,
		provider => "fac_prov_ipmi",
		count => 3,
		label => "FT %d FM %d",
		entity_ref => "ft%d.fm%d.led",
		entity_ref_nparams => 2,
		fm_service_indctr => "ft%d.fm%d.led",
		fru => "self"
	    }
	]
    },

    #
    # Thumper platforms
    #
    # These systems have 5 fan modules, with each fan module containing 2 fans.
    # The FRUs for the individual fans are the containing fan module.
    #
    {
	set => "Sun-Fire-X4500|Sun-Fire-X4540",
	topology => [
	    {
	        fac_enum => 0,
		provider => "fac_prov_ipmi",
		label => "FT %d",
		count => 5,
		fru => "self",
		entity_ref => "ft%d.prsnt",
		entity_ref_nparams => 1,
		fm_service_indctr => "ft%d.service.led",
		fm_ok2rm_indctr => "ft%d.ok2rm.led",
	    }, {
	        fac_enum => 1,
		provider => "fac_prov_ipmi",
		count => 2,
		entity_ref => "ft%d.f%d.speed",
		entity_ref_nparams => 2,
		fru => "parent"
	    }
	]
    },

    #
    # Fan Module/Fan topology for all G1N/G2N platforms.
    #
    # There are two fan boards, which are FRU's.  Each fan board has
    # 3 fan modules for a total of 6 fan modules, with each fan module
    # containing 2 fans.  The FRU's for the individual fans are the
    # containing fan module.
    #
    # Unfortunately, the IPMI topology on these systems is rather broken, and
    # all the SDRs that should be separate entities in fact refer to the same
    # entity IDs.  So we have to use the alternative 'entity_present' option
    # using a single SDR record.
    #
    {
	set => "Sun-Fire-X4240|Sun-Fire-X4440",
	topology => [
	    {
		count => 2,
		label => "FANBD%d",
		fru => "self"
	    }, {
		fac_enum => 1,
		provider => "fac_prov_ipmi",
		label => "FANBD%d FM%d",
		count => 3,
		fru => "self",
		entity_present => "fb%d.fm%d.prsnt",
		entity_ref => "fb%d.fm%d.prsnt",
		entity_ref_nparams => 2,
		fm_service_indctr=> "fb%d.fm%d.led",
	    }, {
		count => 2,
		fru => "parent"
	    }

	]
    },

    #
    # Fan Module/Fan topology for G4F platforms.
    #
    # These systems have 4 fan assemblies with a single fan per assembly.
    # Each fan assembly is a FRU.  The fan assemblies have a service LED
    # but no other indicators.
    #
    {
	set => "Sun-Fire-X4600-M2",
	topology => [
	    {
	        fac_enum => 1,
		provider => "fac_prov_ipmi",
		count => 4,
		label => "FT %d",
		fru => "self",
		entity_ref => "ft%d.fm0.prsnt",
		entity_ref_nparams => 1,
		fm_service_indctr => "ft%d.fm0.led"
	    }	
	]
    }
);

#
# Process an entry in the topology list.  We are passed the indentation level,
# the current topology array, and any pushed indices.  This is called
# recursively.
#
sub process_topology
{
	my ($indent, $toporef, @indices) = @_;
	my @topo = @$toporef;
	my $level = shift @topo;
	my $type = $#topo == -1 ? "fan" : "fanmodule";

	printf("%*s<range name='%s' min='%d' max='%d'>\n",
	    $indent, "", $type, 0, $level->{count} - 1);
	$indent += 2;

	for (my $i = 0; $i < $level->{count}; $i++) {
		push @indices, $i;

		printf("%*s<node instance='%d'>\n", $indent, "", $i);

		$indent += 2;

		# Facility enumerator
		if ($level->{fac_enum}) {
			printf("%*s<fac-enum provider='",
			    $indent, "");
			printf($level->{provider}, @indices);
			printf("' />\n");
		}

		# Facility nodes for service and ok2rm LED's
		if ($level->{fm_service_indctr}) {
			printf("%*s<facility name='service' type='indicator' ".
			    "provider='fac_prov_ipmi' >\n", $indent+2, "");
			printf("%*s<propgroup name='facility' version='1' ".
			    "name-stability='Private' data-stability='Private' >\n",
			    $indent+4, "");
			printf("%*s<propval name='type' type='uint32' ".
			    "value='1' />\n", $indent+6, "");
			printf("%*s<propmethod name='ipmi_entity' version='0' ".
			    "propname='entity_ref' proptype='string' >\n",
			    $indent+6, "");
			printf("%*s<argval name='format' type='string' ".
			    "value='%s' />\n", $indent+8, "",
			    $level->{fm_service_indctr});
			printf("%*s<argval name='offset' type='uint32' ".
			    "value='0' />\n", $indent+8, "");
			printf("%*s<argval name='nparams' type='uint32' ".
			    "value='%d' />\n", $indent+8, "",
			    $level->{entity_ref_nparams});
			printf("%*s</propmethod>\n", $indent+6, "");
			printf("%*s<propmethod name='ipmi_indicator_mode' ".
			    "version='0' propname='mode' proptype='uint32' ".
			    "mutable='1' >\n", $indent+6, "");
			printf("%*s</propmethod>\n", $indent+6, "");
			printf("%*s</propgroup>\n", $indent+4, "");
			printf("%*s</facility>\n", $indent+2, "");
		}
		if ($level->{fm_ok2rm_indctr}) {
			printf("%*s<facility name='ok2rm' type='indicator' ".
			    "provider='fac_prov_ipmi' >\n", $indent+2, "");
			printf("%*s<propgroup name='facility' version='1' ".
			    "name-stability='Private' data-stability='Private' >\n",
			    $indent+4, "");
			printf("%*s<propval name='type' type='uint32' ".
			    "value='2' />\n", $indent+6, "");
			printf("%*s<propmethod name='ipmi_entity' version='0' ".
			    "propname='entity_ref' proptype='string' >\n",
			    $indent+6, "");
			printf("%*s<argval name='format' type='string' ".
			    "value='%s' />\n", $indent+8, "",
			    $level->{fm_ok2rm_indctr});
			printf("%*s<argval name='offset' type='uint32' ".
			    "value='0' />\n", $indent+8, "");
			printf("%*s<argval name='nparams' type='uint32' ".
			    "value='%d' />\n", $indent+8, "",
			    $level->{entity_ref_nparams});
			printf("%*s</propmethod>\n", $indent+6, "");
			printf("%*s<propmethod name='ipmi_indicator_mode' ".
			    "version='0' propname='mode' proptype='uint32' mutable='1' >\n",
			    $indent+6, "");
			printf("%*s</propmethod>\n", $indent+6, "");
			printf("%*s</propgroup>\n", $indent+4, "");
			printf("%*s</facility>\n", $indent+2, "");
		}

		# Protocol properties (label, fmri)
		printf("%*s<propgroup name='protocol' version='1' " .
		    "name-stability='Private' data-stability='Private'>\n",
		    $indent, "");

		$indent += 2;

		if ($level->{label}) {
			printf("%*s<propval name='label' type='string' " .
			    "value='", $indent, "");
			printf($level->{label}, @indices);
			printf("' />\n");
		}

		printf("%*s<propmethod name='ipmi_fru_fmri' " .
		    "version='0' propname='FRU' proptype='fmri'>\n",
		    $indent, "");
		printf("%*s<argval name='entity' type='string' " .
		    "value='%s' />\n", $indent + 2, "", $level->{fru});
		printf("%*s</propmethod>\n", $indent, "");

		$indent -= 2;

		printf("%*s</propgroup>\n", $indent, "");

		#
		# Entity references (if any)
		#
		if ($level->{entity_ref} || $level->{entity_present}) {
			my $name = $level->{entity_ref} ? "entity_ref" :
			    "entity_present";
			my $val = $level->{$name};
			printf("%*s<propgroup name='ipmi' version='1' " .
			    "name-stability='Private' " .
			    "data-stability='Private' >\n", $indent, "");
			printf("%*s<propval name='%s' " .
			    "type='string' value='", $indent + 2, "", $name);
			printf($val, @indices);
			printf("' />\n");
			printf("%*s</propgroup>\n", $indent, "");
		}

		#
		# Post-process IPMI enumerator method
		#
		printf("%*s<enum-method name='ipmi' version='1' ".
		    "/>\n", $indent, "");

		#
		# Children (if any)
		#
		if ($#topo != -1) {
			printf("%*s<dependents grouping='children'>\n",
			    $indent, "");
			process_topology($indent + 2, \@topo, @indices);
			printf("%*s</dependents>\n", $indent, "");
		}

		$indent -= 2;

		printf("%*s</node>\n", $indent, "");
		pop @indices;
	}

	$indent -= 2;
	printf("%*s</range>\n", $indent, "");
}

#
# Process a single platform file.
#
sub process_platform
{
	my ($desc) = @_;
	my $indent = 2;

	printf("%*s<set type='product' setlist='%s'>\n", $indent, "",
	    $desc->{set});

	process_topology($indent + 2, $desc->{topology});

	printf("%*s</set>\n", $indent, "");
}

print "<topology name='fan' scheme='hc'>\n";

my $desc;
foreach $desc (@platforms) {
	process_platform($desc);
}

print "</topology>\n";