#!/usr/local/bin/perl
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#

$num_bays = 48;
$bay_label = "HD_ID_";

sub calc_sfx_prop
{
	my $name = shift;
	my $bay = shift;
	my $sid = shift;
	my @names = (
	    "+PRSNT",			"-PRSNT",
	    "+OK2RM",			"-OK2RM",
	    "+FAULT",			"-FAULT");
	my @masks = (
	    "amask=0x0001",		"dmask=0x0001",
	    "amask=0x0008",		"dmask=0x0008",
	    "amask=0x0002",		"dmask=0x0002");
	my @states = (
	    "absent>present",		"present>configured",
	    "configured>unconfigured",	"unconfigured>configured",
	    "unconfigured>absent",	"configured>absent",
	    "present>absent",		"absent>configured");
	my @actions = (
	    "+PRSNT&+OK2RM",	"+PRSNT&-OK2RM",
	    "+OK2RM",			"-OK2RM",
	    "-OK2RM&-PRSNT",	"-OK2RM&-PRSNT",
	    "-OK2RM&-PRSNT",	"-OK2RM&+PRSNT");

	printf "\n";
	printf "      <propgroup name='%s-properties' version='1' " .
		"name-stability='Private' data-stability='Private' >\n", $name;
	printf "        <propval name='fru-update-action' type='string' " .
		"value='ipmi:fru gid=3 hdd=%d' />\n", $bay;

	for ($i = 0; $i < 6; $i++) {
		printf "        <propval name='indicator-name-%d' " .
			"type='string' value='%s' />\n", $i, $names[$i];
		printf "        <propval name='indicator-action-%d' " .
			"type='string' value='ipmi:state sid=%d %s' />\n",
			$i, $sid, $masks[$i];
	}

	for ($i = 0; $i < 8; $i++) {
		printf "        <propval name='indicator-rule-states-%d' " .
			"type='string' value='%s' />\n", $i, $states[$i];
		printf "        <propval name='indicator-rule-actions-%d' " .
			"type='string' value='%s' />\n", $i, $actions[$i];
	}
	printf "      </propgroup>\n\n";
}

print <<EOF;
<topology name='disk' scheme='hc'>
  <range name='bay' min='0' max='47'>
    <facility name='locate' type='indicator' provider='fac_prov_ipmi' >
      <propgroup name='facility' version='1' name-stability='Private'
	data-stability='Private' >
	<propval name='type' type='uint32' value='1' />
	<propmethod name='ipmi_entity' version='0' propname='entity_ref'
	  proptype='string' >
	  <argval name='format' type='string' value='hdd\%d.ok2rm.led' />
	  <argval name='offset' type='uint32' value='0' />
	  <argval name='nparams' type='uint32' value='1' />
	</propmethod>
	<propmethod name='thumper_locate_mode' version='0'
	  propname='mode' proptype='uint32' mutable='1'>
	</propmethod>
      </propgroup>
    </facility>
    <facility name='ok2rm' type='indicator' provider='fac_prov_ipmi' >
      <propgroup name='facility' version='1' name-stability='Private'
	data-stability='Private' >
	<propval name='type' type='uint32' value='2' />
	<propmethod name='ipmi_entity' version='0' propname='entity_ref'
	  proptype='string' >
	  <argval name='format' type='string' value='hdd\%d.state' />
	  <argval name='offset' type='uint32' value='0' />
	  <argval name='nparams' type='uint32' value='1' />
	</propmethod>
	<propmethod name='thumper_indicator_mode' version='0'
	  propname='mode' proptype='uint32' mutable='1'>
	</propmethod>
      </propgroup>
    </facility>
    <facility name='service' type='indicator' provider='fac_prov_ipmi' >
      <propgroup name='facility' version='1' name-stability='Private'
	data-stability='Private' >
	<propval name='type' type='uint32' value='0' />
	<propmethod name='ipmi_entity' version='0' propname='entity_ref'
	  proptype='string' >
	  <argval name='format' type='string' value='hdd\%d.state' />
	  <argval name='offset' type='uint32' value='0' />
	  <argval name='nparams' type='uint32' value='1' />
	</propmethod>
	<propmethod name='thumper_indicator_mode' version='0' propname='mode'
	  proptype='uint32' mutable='1'>
	</propmethod>
      </propgroup>
    </facility>
    <facility name='present' type='indicator' provider='fac_prov_ipmi' >
      <propgroup name='facility' version='1' name-stability='Private'
	data-stability='Private' >
        <propval name='type' type='uint32' value='3' />
	<propmethod name='ipmi_entity' version='0' propname='entity_ref'
	  proptype='string' >
	  <argval name='format' type='string' value='hdd\%d.state' />
	  <argval name='offset' type='uint32' value='0' />
	  <argval name='nparams' type='uint32' value='1' />
	</propmethod>
        <propmethod name='thumper_indicator_mode' version='0' propname='mode'
	  proptype='uint32' mutable='1'>
        </propmethod>
      </propgroup>
    </facility>
EOF

my @pci0=(0, 0, 0, 0x3c, 0x3c, 0x3c);
my @pci1=(0x377, 0x375, 0x376, 0x377, 0x375, 0x376);
my @pci2=(0xa, 0xb, 0xf, 0xa, 0xb, 0xf);

for ($bay = 0; $bay < $num_bays; $bay++) {
	$sid = 90 + $bay;
	$target = $bay % 8;
	$controller = $bay / 8;

	# set hba path, target path, bay path, and attachment point
	$hpath = sprintf("/pci\@%x,0/pci10de,%x\@%x/pci1000,1000\@0",
	    $pci0[$controller], $pci1[$controller], $pci2[$controller]);
	$tpath = sprintf("/sd\@%x,0", $target);
	$apoint = sprintf(":scsi::dsk/c%dt%dd0",
	    $controller + 1, $target);

	print <<EOF;
    <node instance='$bay'>
      <propgroup name='protocol' version='1' name-stability='Private'
        data-stability='Private'>
	<propval name='label' type='string' value='$bay_label$bay' />
      </propgroup>
      <propgroup name='io' version='1' name-stability='Private'
        data-stability='Private'>
	<propval name='ap-path' type='string' value='/devices$hpath$apoint' />
      </propgroup>
EOF

	calc_sfx_prop("sfx4500", $bay, $sid);

	print <<EOF;
      <propgroup name='binding' version='1' name-stability='Private'
        data-stability='Private'>
	<propval name='occupant-path' type='string' 
	  value='$hpath$tpath' />
      </propgroup>
    </node>
EOF
}

print <<EOF;
    <dependents grouping='children'>
      <range name='disk' min='0' max='0'>
	<enum-method name='disk' version='1' />
      </range>
    </dependents>
  </range>
</topology>
EOF