/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #include #include #include #include #include #include "cfga_sata.h" /* * This file contains the entry points to the plug-in as defined in the * config_admin(3X) man page. */ /* * Set the version number for the cfgadm library's use. */ int cfga_version = CFGA_HSL_V2; enum { HELP_HEADER = 1, HELP_CONFIG, HELP_RESET_PORT, HELP_RESET_DEVICE, HELP_RESET_ALL, HELP_PORT_DEACTIVATE, HELP_PORT_ACTIVATE, HELP_PORT_SELF_TEST, HELP_CNTRL_SELF_TEST, HELP_UNKNOWN }; /* SATA specific help messages */ static char *sata_help[] = { NULL, "SATA specific commands:\n", " cfgadm -c [configure|unconfigure|disconnect|connect] ap_id " "[ap_id...]\n", " cfgadm -x sata_reset_port ap_id [ap_id...]\n", " cfgadm -x sata_reset_device ap_id [ap_id...]\n", " cfgadm -x sata_reset_all ap_id\n", " cfgadm -x sata_port_deactivate ap_id [ap_id...]\n", " cfgadm -x sata_port_activate ap_id [ap_id...]\n", " cfgadm -x sata_port_self_test ap_id [ap_id...]\n", " cfgadm -t ap_id\n", "\tunknown command or option:\n", NULL }; /* End help messages */ /* * Messages. */ static msgcvt_t sata_msgs[] = { /* CFGA_SATA_OK */ { CVT, CFGA_OK, "" }, /* CFGA_SATA_NACK */ { CVT, CFGA_NACK, "" }, /* CFGA_SATA_DEVICE_UNCONFIGURED */ { CVT, CFGA_OK, "Device unconfigured prior to disconnect" }, /* CFGA_SATA_UNKNOWN / CFGA_LIB_ERROR -> "Library error" */ { CVT, CFGA_LIB_ERROR, "Unknown message; internal error" }, /* CFGA_SATA_INTERNAL_ERROR / CFGA_LIB_ERROR -> "Library error" */ { CVT, CFGA_LIB_ERROR, "Internal error" }, /* CFGA_SATA_DATA_ERROR / CFGA_DATA_ERROR -> "Data error" */ { CVT, CFGA_DATA_ERROR, "cfgadm data error" }, /* CFGA_SATA_OPTIONS / CFGA_ERROR -> "Hardware specific failure" */ { CVT, CFGA_ERROR, "Hardware specific option not supported" }, /* CFGA_SATA_HWOPNOTSUPP / CFGA_ERROR -> "Hardware specific failure" */ { CVT, CFGA_ERROR, "Hardware specific operation not supported" }, /* * CFGA_SATA_DYNAMIC_AP / * CFGA_LIB_ERROR -> "Configuration operation invalid" */ { CVT, CFGA_INVAL, "Cannot identify attached device" }, /* CFGA_SATA_AP / CFGA_APID_NOEXIST -> "Attachment point not found" */ { CVT, CFGA_APID_NOEXIST, "" }, /* CFGA_SATA_PORT / CFGA_LIB_ERROR -> "Library error" */ { CVT, CFGA_LIB_ERROR, "Cannot determine sata port number for " }, /* CFGA_SATA_DEVCTL / CFGA_LIB_ERROR -> "Library error" */ { CVT, CFGA_LIB_ERROR, "Internal error: " "Cannot allocate devctl handle " }, /* * CFGA_SATA_DEV_CONFIGURE / * CFGA_ERROR -> "Hardware specific failure" */ { CVT, CFGA_ERROR, "Failed to config device at " }, /* * CFGA_SATA_DEV_UNCONFIGURE / * CFGA_ERROR -> "Hardware specific failure" */ { CVT, CFGA_ERROR, "Failed to unconfig device at " }, /* * CFGA_SATA_DISCONNECTED * CFGA_INVAL -> "Configuration operation invalid" */ { CVT, CFGA_INVAL, "Port already disconnected " }, /* * CFGA_SATA_NOT_CONNECTED * CFGA_INVAL -> "Configuration operation invalid" */ { CVT, CFGA_INVAL, "No device connected to " }, /* * CFGA_SATA_NOT_CONFIGURED / * CFGA_INVAL -> "Configuration operation invalid" */ { CVT, CFGA_INVAL, "No device configured at " }, /* * CFGA_SATA_ALREADY_CONNECTED / * CFGA_INVAL -> "Configuration operation invalid" */ { CVT, CFGA_INVAL, "Device already connected to " }, /* * CFGA_SATA_ALREADY_CONFIGURED / * CFGA_INVAL -> "Configuration operation invalid" */ { CVT, CFGA_INVAL, "Device already configured at " }, /* * CFGA_SATA_INVALID_DEVNAME / * CFGA_INVAL -> "Configuration operation invalid" */ { CVT, CFGA_INVAL, "Cannot specify device name" }, /* CFGA_SATA_OPEN / CFGA_LIB_ERROR -> "Library error" */ { CVT, CFGA_LIB_ERROR, "Cannot open " }, /* CFGA_SATA_IOCTL / CFGA_ERROR -> "Hardware specific failure" */ { CVT, CFGA_ERROR, "Driver ioctl failed " }, /* * CFGA_SATA_BUSY / * CFGA_SYSTEM_BUSY -> "System is busy, try again" */ { CVT, CFGA_SYSTEM_BUSY, "" }, /* CFGA_SATA_ALLOC_FAIL / CFGA_LIB_ERROR -> "Library error" */ { CVT, CFGA_LIB_ERROR, "Memory allocation failure" }, /* * CFGA_SATA_OPNOTSUPP / * CFGA_OPNOTSUPP -> "Configuration operation not supported" */ { CVT, CFGA_OPNOTSUPP, "Operation not supported" }, /* CFGA_SATA_DEVLINK / CFGA_LIB_ERROR -> "Library error" */ { CVT, CFGA_LIB_ERROR, "Could not find /dev/cfg link for " }, /* CFGA_SATA_STATE / CFGA_LIB_ERROR -> "Library error" */ { CVT, CFGA_LIB_ERROR, "Internal error: Unrecognized ap state" }, /* CFGA_SATA_PRIV / CFGA_PRIV -> "Insufficient privileges" */ { CVT, CFGA_PRIV, "" }, /* CFGA_SATA_NVLIST / CFGA_ERROR -> "Hardware specific failure" */ { CVT, CFGA_ERROR, "Internal error (nvlist)" }, /* CFGA_SATA_ZEROLEN / CFGA_ERROR -> "Hardware specific failure" */ { CVT, CFGA_ERROR, "Internal error (zerolength string)" }, /* CFGA_SATA_RCM_HANDLE / CFGA_ERROR -> "Hardware specific failure" */ { CVT, CFGA_ERROR, "cannot get RCM handle"}, /* * CFGA_SATA_RCM_ONLINE / * CFGA_SYSTEM_BUSY -> "System is busy, try again" */ { CVT, CFGA_SYSTEM_BUSY, "failed to online: "}, /* * CFGA_SATA_RCM_OFFLINE / * CFGA_SYSTEM_BUSY -> "System is busy, try again" */ { CVT, CFGA_SYSTEM_BUSY, "failed to offline: "}, /* CFGA_SATA_RCM_INFO / CFGA_ERROR -> "Hardware specific failure" */ { CVT, CFGA_ERROR, "failed to query: "} }; /* End error messages */ static cfga_sata_ret_t verify_params(const char *ap_id, const char *options, char **errstring); static cfga_sata_ret_t setup_for_devctl_cmd(const char *ap_id, devctl_hdl_t *devctl_hdl, nvlist_t **user_nvlistp, uint_t oflag); static cfga_sata_ret_t port_state(devctl_hdl_t hdl, nvlist_t *list, ap_rstate_t *rstate, ap_ostate_t *ostate); static cfga_sata_ret_t do_control_ioctl(const char *ap_id, sata_cfga_apctl_t subcommand, uint_t arg, void **descrp, size_t *sizep); static void cleanup_after_devctl_cmd(devctl_hdl_t devctl_hdl, nvlist_t *user_nvlist); static char * sata_get_devicepath(const char *ap_id); static int sata_confirm(struct cfga_confirm *confp, char *msg); static cfga_sata_ret_t get_port_num(const char *ap_id, uint32_t *port); /* Utilities */ static cfga_sata_ret_t physpath_to_devlink(const char *basedir, const char *node_path, char **logpp, int *l_errnop) { char *linkpath; char *buf; char *real_path; DIR *dp; struct dirent *dep, *newdep; int deplen; boolean_t found = B_FALSE; int err = 0; struct stat sb; char *p; cfga_sata_ret_t rv = CFGA_SATA_INTERNAL_ERROR; /* * Using libdevinfo for this is overkill and kills performance * when multiple consumers of libcfgadm are executing * concurrently. */ if ((dp = opendir(basedir)) == NULL) { *l_errnop = errno; return (CFGA_SATA_INTERNAL_ERROR); } linkpath = malloc(PATH_MAX); buf = malloc(PATH_MAX); real_path = malloc(PATH_MAX); deplen = pathconf(basedir, _PC_NAME_MAX); deplen = (deplen <= 0 ? MAXNAMELEN : deplen) + sizeof (struct dirent); dep = (struct dirent *)malloc(deplen); if (dep == NULL || linkpath == NULL || buf == NULL || real_path == NULL) { *l_errnop = ENOMEM; rv = CFGA_SATA_ALLOC_FAIL; goto pp_cleanup; } *logpp = NULL; while (!found && (err = readdir_r(dp, dep, &newdep)) == 0 && newdep != NULL) { assert(newdep == dep); if (strcmp(dep->d_name, ".") == 0 || strcmp(dep->d_name, "..") == 0) continue; (void) snprintf(linkpath, MAXPATHLEN, "%s/%s", basedir, dep->d_name); if (lstat(linkpath, &sb) < 0) continue; if (S_ISDIR(sb.st_mode)) { if ((rv = physpath_to_devlink(linkpath, node_path, logpp, l_errnop)) != CFGA_SATA_OK) { goto pp_cleanup; } if (*logpp != NULL) found = B_TRUE; } else if (S_ISLNK(sb.st_mode)) { bzero(buf, PATH_MAX); if (readlink(linkpath, buf, PATH_MAX) < 0) continue; /* * realpath() is too darn slow, so fake * it, by using what we know about /dev * links: they are always of the form: * <"../">+/devices/ */ p = buf; while (strncmp(p, "../", 3) == 0) p += 3; if (p != buf) p--; /* back up to get a slash */ assert (*p == '/'); if (strcmp(p, node_path) == 0) { *logpp = strdup(linkpath); if (*logpp == NULL) { rv = CFGA_SATA_ALLOC_FAIL; goto pp_cleanup; } found = B_TRUE; } } } free(linkpath); free(buf); free(real_path); free(dep); (void) closedir(dp); if (err != 0) { *l_errnop = err; return (CFGA_SATA_INTERNAL_ERROR); } return (CFGA_SATA_OK); pp_cleanup: if (dp) (void) closedir(dp); if (dep) free(dep); if (linkpath) free(linkpath); if (buf) free(buf); if (real_path) free(real_path); if (*logpp) { free(*logpp); *logpp = NULL; } return (rv); } /* * Given the index into a table (msgcvt_t) of messages, get the message * string, converting it to the proper locale if necessary. * NOTE: Indexes are defined in cfga_sata.h */ static const char * get_msg(uint_t msg_index, msgcvt_t *msg_tbl, uint_t tbl_size) { if (msg_index >= tbl_size) { msg_index = CFGA_SATA_UNKNOWN; } return ((msg_tbl[msg_index].intl) ? dgettext(TEXT_DOMAIN, msg_tbl[msg_index].msgstr) : msg_tbl[msg_index].msgstr); } /* * Allocates and creates a message string (in *ret_str), * by concatenating all the (char *) args together, in order. * Last arg MUST be NULL. */ static void set_msg(char **ret_str, ...) { char *str; size_t total_len; va_list valist; va_start(valist, ret_str); total_len = (*ret_str == NULL) ? 0 : strlen(*ret_str); while ((str = va_arg(valist, char *)) != NULL) { size_t len = strlen(str); char *old_str = *ret_str; *ret_str = (char *)realloc(*ret_str, total_len + len + 1); if (*ret_str == NULL) { /* We're screwed */ free(old_str); va_end(valist); return; } (void) strcpy(*ret_str + total_len, str); total_len += len; } va_end(valist); } /* * Error message handling. * For the rv passed in, looks up the corresponding error message string(s), * internationalized if necessary, and concatenates it into a new * memory buffer, and points *errstring to it. * Note not all rvs will result in an error message return, as not all * error conditions warrant a SATA-specific error message - for those * conditions the cfgadm generic messages are sufficient. * * Some messages may display ap_id or errno, which is why they are passed * in. */ cfga_err_t sata_err_msg( char **errstring, cfga_sata_ret_t rv, const char *ap_id, int l_errno) { if (errstring == NULL) { return (sata_msgs[rv].cfga_err); } /* * Generate the appropriate SATA-specific error message(s) (if any). */ switch (rv) { case CFGA_SATA_OK: case CFGA_NACK: /* Special case - do nothing. */ break; case CFGA_SATA_UNKNOWN: case CFGA_SATA_DYNAMIC_AP: case CFGA_SATA_INTERNAL_ERROR: case CFGA_SATA_OPTIONS: case CFGA_SATA_ALLOC_FAIL: case CFGA_SATA_STATE: case CFGA_SATA_PRIV: case CFGA_SATA_OPNOTSUPP: case CFGA_SATA_DATA_ERROR: /* These messages require no additional strings passed. */ set_msg(errstring, ERR_STR(rv), NULL); break; case CFGA_SATA_HWOPNOTSUPP: /* hardware-specific help needed */ set_msg(errstring, ERR_STR(rv), NULL); set_msg(errstring, "\n", dgettext(TEXT_DOMAIN, sata_help[HELP_HEADER]), NULL); set_msg(errstring, sata_help[HELP_RESET_PORT], NULL); set_msg(errstring, sata_help[HELP_RESET_DEVICE], NULL); set_msg(errstring, sata_help[HELP_RESET_ALL], NULL); set_msg(errstring, sata_help[HELP_PORT_ACTIVATE], NULL); set_msg(errstring, sata_help[HELP_PORT_DEACTIVATE], NULL); set_msg(errstring, sata_help[HELP_PORT_SELF_TEST], NULL); set_msg(errstring, sata_help[HELP_CNTRL_SELF_TEST], NULL); break; case CFGA_SATA_AP: case CFGA_SATA_PORT: case CFGA_SATA_NOT_CONNECTED: case CFGA_SATA_NOT_CONFIGURED: case CFGA_SATA_ALREADY_CONNECTED: case CFGA_SATA_ALREADY_CONFIGURED: case CFGA_SATA_BUSY: case CFGA_SATA_DEVLINK: case CFGA_SATA_RCM_HANDLE: case CFGA_SATA_RCM_ONLINE: case CFGA_SATA_RCM_OFFLINE: case CFGA_SATA_RCM_INFO: case CFGA_SATA_DEV_CONFIGURE: case CFGA_SATA_DEV_UNCONFIGURE: case CFGA_SATA_DISCONNECTED: /* These messages also print ap_id. */ set_msg(errstring, ERR_STR(rv), "ap_id: ", ap_id, "", NULL); break; case CFGA_SATA_IOCTL: case CFGA_SATA_NVLIST: /* These messages also print errno. */ { char *errno_str = l_errno ? strerror(l_errno) : ""; set_msg(errstring, ERR_STR(rv), errno_str, l_errno ? "\n" : "", NULL); break; } case CFGA_SATA_OPEN: /* These messages also apid and errno. */ { char *errno_str = l_errno ? strerror(l_errno) : ""; set_msg(errstring, ERR_STR(rv), "ap_id: ", ap_id, "\n", errno_str, l_errno ? "\n" : "", NULL); break; } default: set_msg(errstring, ERR_STR(CFGA_SATA_INTERNAL_ERROR), NULL); } /* end switch */ /* * Determine the proper error code to send back to the cfgadm library. */ return (sata_msgs[rv].cfga_err); } /* * Entry points */ /* cfgadm entry point */ /*ARGSUSED*/ cfga_err_t cfga_change_state( cfga_cmd_t state_change_cmd, const char *ap_id, const char *options, struct cfga_confirm *confp, struct cfga_msg *msgp, char **errstring, cfga_flags_t flags) { int ret; int len; char *msg; char *devpath; nvlist_t *nvl = NULL; ap_rstate_t rstate; ap_ostate_t ostate; devctl_hdl_t hdl = NULL; cfga_sata_ret_t rv = CFGA_SATA_OK; char *pdyn; char *str_type; size_t size; boolean_t pmult = B_FALSE; /* * All sub-commands which can change state of device require * root privileges. */ if (geteuid() != 0) { rv = CFGA_SATA_PRIV; goto bailout; } if ((rv = verify_params(ap_id, options, errstring)) != CFGA_SATA_OK) { (void) cfga_help(msgp, options, flags); goto bailout; } if ((rv = setup_for_devctl_cmd(ap_id, &hdl, &nvl, DC_RDONLY)) != CFGA_SATA_OK) { goto bailout; } /* * Checking device type. A port multiplier is not configurable - it is * already configured as soon as it is connected. */ if ((rv = do_control_ioctl(ap_id, SATA_CFGA_GET_AP_TYPE, NULL, (void **)&str_type, &size)) != CFGA_SATA_OK) { /* no such deivce */ goto bailout; } if (strncmp(str_type, "sata-pmult", sizeof ("sata-pmult")) == 0) { pmult = B_TRUE; } switch (state_change_cmd) { case CFGA_CMD_CONFIGURE: if (pmult == B_TRUE) { rv = CFGA_SATA_HWOPNOTSUPP; goto bailout; } if ((rv = port_state(hdl, nvl, &rstate, &ostate)) != CFGA_SATA_OK) goto bailout; if (ostate == AP_OSTATE_CONFIGURED) { rv = CFGA_SATA_ALREADY_CONFIGURED; goto bailout; } /* Disallow dynamic AP name component */ if (GET_DYN(ap_id) != NULL) { rv = CFGA_SATA_INVALID_DEVNAME; goto bailout; } if (rstate == AP_RSTATE_EMPTY) { rv = CFGA_SATA_NOT_CONNECTED; goto bailout; } rv = CFGA_SATA_OK; if (devctl_ap_configure(hdl, nvl) != 0) { rv = CFGA_SATA_DEV_CONFIGURE; goto bailout; } devpath = sata_get_devicepath(ap_id); if (devpath == NULL) { int i; /* * Try for some time as SATA hotplug thread * takes a while to create the path then * eventually give up. */ for (i = 0; i < 12 && (devpath == NULL); i++) { (void) sleep(6); devpath = sata_get_devicepath(ap_id); } if (devpath == NULL) { rv = CFGA_SATA_DEV_CONFIGURE; break; } } S_FREE(devpath); break; case CFGA_CMD_UNCONFIGURE: if (pmult == B_TRUE) { rv = CFGA_SATA_HWOPNOTSUPP; goto bailout; } if ((rv = port_state(hdl, nvl, &rstate, &ostate)) != CFGA_SATA_OK) goto bailout; if (rstate != AP_RSTATE_CONNECTED) { rv = CFGA_SATA_NOT_CONNECTED; goto bailout; } if (ostate != AP_OSTATE_CONFIGURED) { rv = CFGA_SATA_NOT_CONFIGURED; goto bailout; } /* Strip off AP name dynamic component, if present */ if ((pdyn = GET_DYN(ap_id)) != NULL) { *pdyn = '\0'; } rv = CFGA_SATA_OK; len = strlen(SATA_CONFIRM_DEVICE) + strlen(SATA_CONFIRM_DEVICE_SUSPEND) + strlen("Unconfigure") + strlen(ap_id); if ((msg = (char *)calloc(len +3, 1)) != NULL) { (void) snprintf(msg, len + 3, "Unconfigure" " %s%s\n%s", SATA_CONFIRM_DEVICE, ap_id, SATA_CONFIRM_DEVICE_SUSPEND); } if (!sata_confirm(confp, msg)) { free(msg); rv = CFGA_SATA_NACK; break; } free(msg); devpath = sata_get_devicepath(ap_id); if (devpath == NULL) { (void) printf( "cfga_change_state: get device path failed\n"); rv = CFGA_SATA_DEV_UNCONFIGURE; break; } if ((rv = sata_rcm_offline(ap_id, errstring, devpath, flags)) != CFGA_SATA_OK) { break; } ret = devctl_ap_unconfigure(hdl, nvl); if (ret != 0) { rv = CFGA_SATA_DEV_UNCONFIGURE; if (errno == EBUSY) { rv = CFGA_SATA_BUSY; } (void) sata_rcm_online(ap_id, errstring, devpath, flags); } else { (void) sata_rcm_remove(ap_id, errstring, devpath, flags); } S_FREE(devpath); break; case CFGA_CMD_DISCONNECT: if ((rv = port_state(hdl, nvl, &rstate, &ostate)) != CFGA_SATA_OK) goto bailout; if (rstate == AP_RSTATE_DISCONNECTED) { rv = CFGA_SATA_DISCONNECTED; goto bailout; } /* Strip off AP name dynamic component, if present */ if ((pdyn = GET_DYN(ap_id)) != NULL) { *pdyn = '\0'; } rv = CFGA_SATA_OK; /* other statuses don't matter */ /* * If the port originally with device attached and was * unconfigured already, the devicepath for the sd will be * removed. sata_get_devicepath in this case is not necessary. */ /* only call rcm_offline if the state was CONFIGURED */ if (ostate == AP_OSTATE_CONFIGURED && pmult == B_FALSE) { devpath = sata_get_devicepath(ap_id); if (devpath == NULL) { (void) printf( "cfga_change_state: get path failed\n"); rv = CFGA_SATA_DEV_UNCONFIGURE; break; } len = strlen(SATA_CONFIRM_DEVICE) + strlen(SATA_CONFIRM_DEVICE_SUSPEND) + strlen("Disconnect") + strlen(ap_id); if ((msg = (char *)calloc(len +3, 1)) != NULL) { (void) snprintf(msg, len + 3, "Disconnect" " %s%s\n%s", SATA_CONFIRM_DEVICE, ap_id, SATA_CONFIRM_DEVICE_SUSPEND); } if (!sata_confirm(confp, msg)) { free(msg); rv = CFGA_SATA_NACK; break; } free(msg); if ((rv = sata_rcm_offline(ap_id, errstring, devpath, flags)) != CFGA_SATA_OK) { break; } ret = devctl_ap_unconfigure(hdl, nvl); if (ret != 0) { (void) printf( "devctl_ap_unconfigure failed\n"); rv = CFGA_SATA_DEV_UNCONFIGURE; if (errno == EBUSY) rv = CFGA_SATA_BUSY; (void) sata_rcm_online(ap_id, errstring, devpath, flags); S_FREE(devpath); /* * The current policy is that if unconfigure * failed, do not continue with disconnect. * If the port needs to be forced into the * disconnect (shutdown) state, * the -x sata_port_poweroff command should be * used instead of -c disconnect */ break; } else { (void) printf("%s\n", ERR_STR(CFGA_SATA_DEVICE_UNCONFIGURED)); (void) sata_rcm_remove(ap_id, errstring, devpath, flags); } S_FREE(devpath); } else if (rstate == AP_RSTATE_CONNECTED || rstate == AP_RSTATE_EMPTY) { len = strlen(SATA_CONFIRM_PORT) + strlen(SATA_CONFIRM_PORT_DISABLE) + strlen("Deactivate Port") + strlen(ap_id); if ((msg = (char *)calloc(len +3, 1)) != NULL) { (void) snprintf(msg, len +3, "Disconnect" " %s%s\n%s", SATA_CONFIRM_PORT, ap_id, SATA_CONFIRM_PORT_DISABLE); } if (!sata_confirm(confp, msg)) { free(msg); rv = CFGA_SATA_NACK; break; } } ret = devctl_ap_disconnect(hdl, nvl); if (ret != 0) { rv = CFGA_SATA_IOCTL; if (errno == EBUSY) { rv = CFGA_SATA_BUSY; } } break; case CFGA_CMD_CONNECT: if ((rv = port_state(hdl, nvl, &rstate, &ostate)) != CFGA_SATA_OK) goto bailout; if (rstate == AP_RSTATE_CONNECTED) { rv = CFGA_SATA_ALREADY_CONNECTED; goto bailout; } len = strlen(SATA_CONFIRM_PORT) + strlen(SATA_CONFIRM_PORT_ENABLE) + strlen("Activate Port") + strlen(ap_id); if ((msg = (char *)calloc(len +3, 1)) != NULL) { (void) snprintf(msg, len +3, "Activate" " %s%s\n%s", SATA_CONFIRM_PORT, ap_id, SATA_CONFIRM_PORT_ENABLE); } if (!sata_confirm(confp, msg)) { rv = CFGA_SATA_NACK; break; } /* Disallow dynamic AP name component */ if (GET_DYN(ap_id) != NULL) { rv = CFGA_SATA_INVALID_DEVNAME; goto bailout; } ret = devctl_ap_connect(hdl, nvl); if (ret != 0) { rv = CFGA_SATA_IOCTL; } else { rv = CFGA_SATA_OK; } break; case CFGA_CMD_LOAD: case CFGA_CMD_UNLOAD: (void) cfga_help(msgp, options, flags); rv = CFGA_SATA_OPNOTSUPP; break; case CFGA_CMD_NONE: default: (void) cfga_help(msgp, options, flags); rv = CFGA_SATA_INTERNAL_ERROR; } bailout: cleanup_after_devctl_cmd(hdl, nvl); return (sata_err_msg(errstring, rv, ap_id, errno)); } /* cfgadm entry point */ cfga_err_t cfga_private_func( const char *func, const char *ap_id, const char *options, struct cfga_confirm *confp, struct cfga_msg *msgp, char **errstring, cfga_flags_t flags) { int len; char *msg; nvlist_t *list = NULL; ap_ostate_t ostate; ap_rstate_t rstate; devctl_hdl_t hdl = NULL; cfga_sata_ret_t rv; char *str_p; size_t size; if ((rv = verify_params(ap_id, NULL, errstring)) != CFGA_SATA_OK) { (void) cfga_help(msgp, options, flags); return (sata_err_msg(errstring, rv, ap_id, errno)); } /* * All subcommands which can change state of device require * root privileges. */ if (geteuid() != 0) { rv = CFGA_SATA_PRIV; goto bailout; } if (func == NULL) { (void) printf("No valid option specified\n"); rv = CFGA_SATA_OPTIONS; goto bailout; } if ((rv = setup_for_devctl_cmd(ap_id, &hdl, &list, 0)) != CFGA_SATA_OK) { goto bailout; } /* We do not care here about dynamic AP name component */ if ((str_p = GET_DYN(ap_id)) != NULL) { *str_p = '\0'; } rv = CFGA_SATA_OK; if (strcmp(func, SATA_RESET_PORT) == 0) { len = strlen(SATA_CONFIRM_PORT) + strlen(SATA_CONFIRM_DEVICE_ABORT) + strlen("Reset Port") + strlen(ap_id); if ((msg = (char *)calloc(len +3, 1)) != NULL) { (void) snprintf(msg, len +3, "Reset" " %s%s\n%s", SATA_CONFIRM_PORT, ap_id, SATA_CONFIRM_DEVICE_ABORT); } else { rv = CFGA_SATA_NACK; goto bailout; } if (!sata_confirm(confp, msg)) { rv = CFGA_SATA_NACK; goto bailout; } rv = do_control_ioctl(ap_id, SATA_CFGA_RESET_PORT, NULL, (void **)&str_p, &size); } else if (strcmp(func, SATA_RESET_DEVICE) == 0) { if ((rv = port_state(hdl, list, &rstate, &ostate)) != CFGA_SATA_OK) goto bailout; /* * Reset device function requires device to be connected */ if (rstate != AP_RSTATE_CONNECTED) { rv = CFGA_SATA_NOT_CONNECTED; goto bailout; } len = strlen(SATA_CONFIRM_DEVICE) + strlen(SATA_CONFIRM_DEVICE_ABORT) + strlen("Reset Device") + strlen(ap_id); if ((msg = (char *)calloc(len +3, 1)) != NULL) { (void) snprintf(msg, len +3, "Reset" " %s%s\n%s", SATA_CONFIRM_DEVICE, ap_id, SATA_CONFIRM_DEVICE_ABORT); } else { rv = CFGA_SATA_NACK; goto bailout; } if (!sata_confirm(confp, msg)) { rv = CFGA_SATA_NACK; goto bailout; } rv = do_control_ioctl(ap_id, SATA_CFGA_RESET_DEVICE, NULL, (void **)&str_p, &size); } else if (strcmp(func, SATA_RESET_ALL) == 0) { len = strlen(SATA_CONFIRM_CONTROLLER) + strlen(SATA_CONFIRM_CONTROLLER_ABORT) + strlen("Reset All") + strlen(ap_id); if ((msg = (char *)calloc(len +3, 1)) != NULL) { (void) snprintf(msg, len +3, "Reset" " %s%s\n%s", SATA_CONFIRM_CONTROLLER, ap_id, SATA_CONFIRM_CONTROLLER_ABORT); } else { rv = CFGA_SATA_NACK; goto bailout; } if (!sata_confirm(confp, msg)) { rv = CFGA_SATA_NACK; goto bailout; } rv = do_control_ioctl(ap_id, SATA_CFGA_RESET_ALL, NULL, (void **)&str_p, &size); } else if (strcmp(func, SATA_PORT_DEACTIVATE) == 0) { len = strlen(SATA_CONFIRM_PORT) + strlen(SATA_CONFIRM_PORT_DISABLE) + strlen("Deactivate Port") + strlen(ap_id); if ((msg = (char *)calloc(len +3, 1)) != NULL) { (void) snprintf(msg, len +3, "Deactivate" " %s%s\n%s", SATA_CONFIRM_PORT, ap_id, SATA_CONFIRM_PORT_DISABLE); } else { rv = CFGA_SATA_NACK; goto bailout; } if (!sata_confirm(confp, msg)) { rv = CFGA_SATA_NACK; goto bailout; } rv = do_control_ioctl(ap_id, SATA_CFGA_PORT_DEACTIVATE, NULL, (void **)&str_p, &size); } else if (strcmp(func, SATA_PORT_ACTIVATE) == 0) { len = strlen(SATA_CONFIRM_PORT) + strlen(SATA_CONFIRM_PORT_ENABLE) + strlen("Activate Port") + strlen(ap_id); if ((msg = (char *)calloc(len +3, 1)) != NULL) { (void) snprintf(msg, len +3, "Activate" " %s%s\n%s", SATA_CONFIRM_PORT, ap_id, SATA_CONFIRM_PORT_ENABLE); } else { rv = CFGA_SATA_NACK; goto bailout; } if (!sata_confirm(confp, msg)) { rv = CFGA_SATA_NACK; goto bailout; } rv = do_control_ioctl(ap_id, SATA_CFGA_PORT_ACTIVATE, NULL, (void **)&str_p, &size); goto bailout; } else if (strcmp(func, SATA_PORT_SELF_TEST) == 0) { len = strlen(SATA_CONFIRM_PORT) + strlen(SATA_CONFIRM_DEVICE_SUSPEND) + strlen("Self Test Port") + strlen(ap_id); if ((msg = (char *)calloc(len +3, 1)) != NULL) { (void) snprintf(msg, len +3, "Self Test" " %s%s\n%s", SATA_CONFIRM_PORT, ap_id, SATA_CONFIRM_DEVICE_SUSPEND); } else { rv = CFGA_SATA_NACK; goto bailout; } if (!sata_confirm(confp, msg)) { rv = CFGA_SATA_NACK; goto bailout; } rv = do_control_ioctl(ap_id, SATA_CFGA_PORT_SELF_TEST, NULL, (void **)&str_p, &size); } else { /* Unrecognized operation request */ rv = CFGA_SATA_HWOPNOTSUPP; } bailout: cleanup_after_devctl_cmd(hdl, list); return (sata_err_msg(errstring, rv, ap_id, errno)); } /* cfgadm entry point */ /*ARGSUSED*/ cfga_err_t cfga_test( const char *ap_id, const char *options, struct cfga_msg *msgp, char **errstring, cfga_flags_t flags) { /* Should call ioctl for self test - phase 2 */ return (CFGA_OPNOTSUPP); } int sata_check_target_node(di_node_t node, void *arg) { char *minorpath; char *cp; minorpath = di_devfs_minor_path(di_minor_next(node, DI_MINOR_NIL)); if (minorpath != NULL) { if (strstr(minorpath, arg) != NULL) { cp = strrchr(minorpath, (int)*MINOR_SEP); if (cp != NULL) { (void) strcpy(arg, cp); } free(minorpath); return (DI_WALK_TERMINATE); } free(minorpath); } return (DI_WALK_CONTINUE); } struct chk_dev { int c_isblk; char *c_minor; }; /*ARGSUSED*/ static int chk_dev_fcn(di_node_t node, di_minor_t minor, void *arg) { char *mn; struct chk_dev *chkp = (struct chk_dev *)arg; mn = di_minor_name(minor); if (mn == NULL) return (DI_WALK_CONTINUE); if (strcmp(mn, chkp->c_minor) != 0) return (DI_WALK_CONTINUE); chkp->c_isblk = di_minor_spectype(minor) == S_IFBLK ? 1 : 0; return (DI_WALK_TERMINATE); } /* * Don't use devfs if stat() in /devices fails. Use libdevinfo instead. * Retired devices don't show up in devfs. * * Returns: * 1 - minor exists and is of type BLK * 0 - minor does not exist or is not of type BLK. */ static int is_devinfo_blk(char *minor_path) { char *minor_portion; struct chk_dev chk_dev; di_node_t node; int rv; /* * prune minor path for di_init() - no /devices prefix and no minor name */ if (strncmp(minor_path, "/devices/", strlen("/devices/")) != 0) return (0); minor_portion = strrchr(minor_path, *MINOR_SEP); if (minor_portion == NULL) return (0); *minor_portion = 0; node = di_init(minor_path + strlen("/devices"), DINFOMINOR); *minor_portion = *MINOR_SEP; if (node == DI_NODE_NIL) return (0); chk_dev.c_isblk = 0; chk_dev.c_minor = minor_portion + 1; rv = di_walk_minor(node, NULL, 0, &chk_dev, chk_dev_fcn); di_fini(node); if (rv == 0 && chk_dev.c_isblk) return (1); else return (0); } /* * The dynamic component buffer returned by this function has to be freed! */ int sata_make_dyncomp(const char *ap_id, char **dyncomp, const char *type) { char *devpath = NULL; char *cp = NULL; int l_errno; char minor_path[MAXPATHLEN]; char name_part[MAXNAMELEN]; char *devlink = NULL; char *minor_portion = NULL; int deplen; int err; DIR *dp = NULL; struct stat sb; struct dirent *dep = NULL; struct dirent *newdep = NULL; char *p; assert(dyncomp != NULL); /* * Get target node path */ devpath = sata_get_devicepath(ap_id); if (devpath == NULL) { (void) printf("cfga_list_ext: cannot locate target device\n"); return (CFGA_SATA_DYNAMIC_AP); } else { cp = strrchr(devpath, *PATH_SEP); assert(cp != NULL); *cp = 0; /* terminate path for opendir() */ (void) strncpy(name_part, cp + 1, MAXNAMELEN); /* * Using libdevinfo for this is overkill and kills * performance when many consumers are using libcfgadm * concurrently. */ if ((dp = opendir(devpath)) == NULL) { goto bailout; } /* * deplen is large enough to fit the largest path- * struct dirent includes one byte (the terminator) * so we don't add 1 to the calculation here. */ deplen = pathconf(devpath, _PC_NAME_MAX); deplen = ((deplen <= 0) ? MAXNAMELEN : deplen) + sizeof (struct dirent); dep = (struct dirent *)malloc(deplen); if (dep == NULL) goto bailout; while ((err = readdir_r(dp, dep, &newdep)) == 0 && newdep != NULL) { assert(newdep == dep); if (strcmp(dep->d_name, ".") == 0 || strcmp(dep->d_name, "..") == 0 || (minor_portion = strchr(dep->d_name, *MINOR_SEP)) == NULL) continue; *minor_portion = 0; if (strcmp(dep->d_name, name_part) != 0) continue; *minor_portion = *MINOR_SEP; (void) snprintf(minor_path, MAXPATHLEN, "%s/%s", devpath, dep->d_name); /* * Break directly for tape device */ if (strcmp(type, "tape") == 0) break; /* * If stat() fails, the device *may* be retired. * Check via libdevinfo if the device has a BLK minor. * We don't use libdevinfo all the time, since taking * a snapshot is slower than a stat(). */ if (stat(minor_path, &sb) < 0) { if (is_devinfo_blk(minor_path)) { break; } else { continue; } } if (S_ISBLK(sb.st_mode)) break; } (void) closedir(dp); free(dep); free(devpath); dp = NULL; dep = NULL; devpath = NULL; /* * If there was an error, or we didn't exit the loop * by finding a block or character device, bail out. */ if (err != 0 || newdep == NULL) goto bailout; /* * Look for links to the physical path in /dev/dsk * and /dev/rmt. So far, sata modue supports disk, * dvd and tape devices, so we will first look for * BLOCK devices, and then look for tape devices. */ (void) physpath_to_devlink("/dev/dsk", minor_path, &devlink, &l_errno); /* postprocess and copy logical name here */ if (devlink != NULL) { /* * For disks, remove partition/slice info */ if ((cp = strstr(devlink, "dsk/")) != NULL) { /* cXtYdZ[(s[0..15])|(p[0..X])] */ if ((p = strchr(cp + 4, 'd')) != NULL) { p++; /* Skip the 'd' */ while (*p != 0 && isdigit(*p)) p++; *p = 0; } *dyncomp = strdup(cp); } free(devlink); } else if (strcmp(type, "tape") == 0) { /* * For tape device, logical name looks like * rmt/X */ (void) physpath_to_devlink("/dev/rmt", minor_path, &devlink, &l_errno); if (devlink != NULL) { if ((cp = strstr(devlink, "rmt/")) != NULL) { *dyncomp = strdup(cp); } free(devlink); } } return (SATA_CFGA_OK); } bailout: if (dp) (void) closedir(dp); if (devpath) free(devpath); if (dep) free(dep); return (CFGA_SATA_DYNAMIC_AP); } /* cfgadm entry point */ /*ARGSUSED*/ cfga_err_t cfga_list_ext( const char *ap_id, cfga_list_data_t **ap_id_list, int *nlistp, const char *options, const char *listopts, char **errstring, cfga_flags_t flags) { int l_errno; char *ap_id_log = NULL; size_t size; nvlist_t *user_nvlist = NULL; devctl_hdl_t devctl_hdl = NULL; cfga_sata_ret_t rv = CFGA_SATA_OK; devctl_ap_state_t devctl_ap_state; char *pdyn; boolean_t pmult = B_FALSE; uint32_t port; if ((rv = verify_params(ap_id, options, errstring)) != CFGA_SATA_OK) { (void) cfga_help(NULL, options, flags); goto bailout; } /* We do not care here about dynamic AP name component */ if ((pdyn = GET_DYN(ap_id)) != NULL) { *pdyn = '\0'; } if (ap_id_list == NULL || nlistp == NULL) { rv = CFGA_SATA_DATA_ERROR; (void) cfga_help(NULL, options, flags); goto bailout; } /* Get ap status */ if ((rv = setup_for_devctl_cmd(ap_id, &devctl_hdl, &user_nvlist, DC_RDONLY)) != CFGA_SATA_OK) { goto bailout; } /* will call dc_cmd to send IOCTL to kernel */ if (devctl_ap_getstate(devctl_hdl, user_nvlist, &devctl_ap_state) == -1) { cleanup_after_devctl_cmd(devctl_hdl, user_nvlist); rv = CFGA_SATA_IOCTL; goto bailout; } cleanup_after_devctl_cmd(devctl_hdl, user_nvlist); /* * Create cfga_list_data_t struct. */ if ((*ap_id_list = (cfga_list_data_t *)malloc(sizeof (**ap_id_list))) == NULL) { rv = CFGA_SATA_ALLOC_FAIL; goto bailout; } *nlistp = 1; /* * Rest of the code fills in the cfga_list_data_t struct. */ /* Get /dev/cfg path to corresponding to the physical ap_id */ /* Remember ap_id_log must be freed */ rv = physpath_to_devlink(CFGA_DEV_DIR, (char *)ap_id, &ap_id_log, &l_errno); if (rv != 0) { rv = CFGA_SATA_DEVLINK; goto bailout; } /* Get logical ap_id corresponding to the physical */ if (ap_id_log == NULL || strstr(ap_id_log, CFGA_DEV_DIR) == NULL) { rv = CFGA_SATA_DEVLINK; goto bailout; } (void) strlcpy((*ap_id_list)->ap_log_id, /* Strip off /dev/cfg/ */ ap_id_log + strlen(CFGA_DEV_DIR)+ 1, sizeof ((*ap_id_list)->ap_log_id)); free(ap_id_log); ap_id_log = NULL; (void) strlcpy((*ap_id_list)->ap_phys_id, ap_id, sizeof ((*ap_id_list)->ap_phys_id)); switch (devctl_ap_state.ap_rstate) { case AP_RSTATE_EMPTY: (*ap_id_list)->ap_r_state = CFGA_STAT_EMPTY; break; case AP_RSTATE_DISCONNECTED: (*ap_id_list)->ap_r_state = CFGA_STAT_DISCONNECTED; break; case AP_RSTATE_CONNECTED: (*ap_id_list)->ap_r_state = CFGA_STAT_CONNECTED; break; default: rv = CFGA_SATA_STATE; goto bailout; } switch (devctl_ap_state.ap_ostate) { case AP_OSTATE_CONFIGURED: (*ap_id_list)->ap_o_state = CFGA_STAT_CONFIGURED; break; case AP_OSTATE_UNCONFIGURED: (*ap_id_list)->ap_o_state = CFGA_STAT_UNCONFIGURED; break; default: rv = CFGA_SATA_STATE; goto bailout; } switch (devctl_ap_state.ap_condition) { case AP_COND_OK: (*ap_id_list)->ap_cond = CFGA_COND_OK; break; case AP_COND_FAILING: (*ap_id_list)->ap_cond = CFGA_COND_FAILING; break; case AP_COND_FAILED: (*ap_id_list)->ap_cond = CFGA_COND_FAILED; break; case AP_COND_UNUSABLE: (*ap_id_list)->ap_cond = CFGA_COND_UNUSABLE; break; case AP_COND_UNKNOWN: (*ap_id_list)->ap_cond = CFGA_COND_UNKNOWN; break; default: rv = CFGA_SATA_STATE; goto bailout; } (*ap_id_list)->ap_class[0] = '\0'; /* Filled by libcfgadm */ (*ap_id_list)->ap_busy = devctl_ap_state.ap_in_transition; (*ap_id_list)->ap_status_time = devctl_ap_state.ap_last_change; (*ap_id_list)->ap_info[0] = NULL; if ((*ap_id_list)->ap_r_state == CFGA_STAT_CONNECTED) { char *str_p; int skip, i; /* * Fill in the 'Information' field for the -v option * Model (MOD:) */ if ((rv = do_control_ioctl(ap_id, SATA_CFGA_GET_MODEL_INFO, NULL, (void **)&str_p, &size)) != CFGA_SATA_OK) { (void) printf( "SATA_CFGA_GET_MODULE_INFO ioctl failed\n"); goto bailout; } /* drop leading and trailing spaces */ skip = strspn(str_p, " "); for (i = size - 1; i >= 0; i--) { if (str_p[i] == '\040') str_p[i] = '\0'; else if (str_p[i] != '\0') break; } (void) strlcpy((*ap_id_list)->ap_info, "Mod: ", sizeof ((*ap_id_list)->ap_info)); (void) strlcat((*ap_id_list)->ap_info, str_p + skip, sizeof ((*ap_id_list)->ap_info)); free(str_p); /* * Fill in the 'Information' field for the -v option * Firmware revision (FREV:) */ if ((rv = do_control_ioctl(ap_id, SATA_CFGA_GET_REVFIRMWARE_INFO, NULL, (void **)&str_p, &size)) != CFGA_SATA_OK) { (void) printf( "SATA_CFGA_GET_REVFIRMWARE_INFO ioctl failed\n"); goto bailout; } /* drop leading and trailing spaces */ skip = strspn(str_p, " "); for (i = size - 1; i >= 0; i--) { if (str_p[i] == '\040') str_p[i] = '\0'; else if (str_p[i] != '\0') break; } (void) strlcat((*ap_id_list)->ap_info, " FRev: ", sizeof ((*ap_id_list)->ap_info)); (void) strlcat((*ap_id_list)->ap_info, str_p + skip, sizeof ((*ap_id_list)->ap_info)); free(str_p); /* * Fill in the 'Information' field for the -v option * Serial Number (SN:) */ if ((rv = do_control_ioctl(ap_id, SATA_CFGA_GET_SERIALNUMBER_INFO, NULL, (void **)&str_p, &size)) != CFGA_SATA_OK) { (void) printf( "SATA_CFGA_GET_SERIALNUMBER_INFO ioctl failed\n"); goto bailout; } /* drop leading and trailing spaces */ skip = strspn(str_p, " "); for (i = size - 1; i >= 0; i--) { if (str_p[i] == '\040') str_p[i] = '\0'; else if (str_p[i] != '\0') break; } (void) strlcat((*ap_id_list)->ap_info, " SN: ", sizeof ((*ap_id_list)->ap_info)); (void) strlcat((*ap_id_list)->ap_info, str_p + skip, sizeof ((*ap_id_list)->ap_info)); free(str_p); /* Fill in ap_type which is collected from HBA driver */ /* call do_control_ioctl TBD */ if ((rv = do_control_ioctl(ap_id, SATA_CFGA_GET_AP_TYPE, NULL, (void **)&str_p, &size)) != CFGA_SATA_OK) { (void) printf( "SATA_CFGA_GET_AP_TYPE ioctl failed\n"); goto bailout; } (void) strlcpy((*ap_id_list)->ap_type, str_p, sizeof ((*ap_id_list)->ap_type)); free(str_p); /* * Checking device type. Port multiplier has no dynamic * suffix. */ if (strncmp((*ap_id_list)->ap_type, "sata-pmult", sizeof ("sata-pmult")) == 0) pmult = B_TRUE; if ((*ap_id_list)->ap_o_state == CFGA_STAT_CONFIGURED && pmult == B_FALSE) { char *dyncomp = NULL; /* * This is the case where we need to generate * a dynamic component of the ap_id, i.e. device. */ rv = sata_make_dyncomp(ap_id, &dyncomp, (*ap_id_list)->ap_type); if (rv != CFGA_SATA_OK) goto bailout; if (dyncomp != NULL) { (void) strcat((*ap_id_list)->ap_log_id, DYN_SEP); (void) strlcat((*ap_id_list)->ap_log_id, dyncomp, sizeof ((*ap_id_list)->ap_log_id)); free(dyncomp); } } } else { /* This is an empty port */ if (get_port_num(ap_id, &port) != SATA_CFGA_OK) { goto bailout; } if (port & SATA_CFGA_PMPORT_QUAL) { (void) strlcpy((*ap_id_list)->ap_type, "pmult-port", sizeof ((*ap_id_list)->ap_type)); } else { (void) strlcpy((*ap_id_list)->ap_type, "sata-port", sizeof ((*ap_id_list)->ap_type)); } } return (sata_err_msg(errstring, rv, ap_id, errno)); bailout: if (*ap_id_list != NULL) { free(*ap_id_list); } if (ap_id_log != NULL) { free(ap_id_log); } return (sata_err_msg(errstring, rv, ap_id, errno)); } /* * This routine accepts a string adn prints it using * the message print routine argument. */ static void cfga_msg(struct cfga_msg *msgp, const char *str) { int len; char *q; if (msgp == NULL || msgp->message_routine == NULL) { (void) printf("cfga_msg: NULL msgp\n"); return; } if ((len = strlen(str)) == 0) { (void) printf("cfga_msg: null str\n"); return; } if ((q = (char *)calloc(len + 1, 1)) == NULL) { perror("cfga_msg"); return; } (void) strcpy(q, str); (*msgp->message_routine)(msgp->appdata_ptr, q); free(q); } /* cfgadm entry point */ /* ARGSUSED */ cfga_err_t cfga_help(struct cfga_msg *msgp, const char *options, cfga_flags_t flags) { if (options != NULL) { cfga_msg(msgp, dgettext(TEXT_DOMAIN, sata_help[HELP_UNKNOWN])); cfga_msg(msgp, options); } cfga_msg(msgp, dgettext(TEXT_DOMAIN, sata_help[HELP_HEADER])); cfga_msg(msgp, sata_help[HELP_CONFIG]); cfga_msg(msgp, sata_help[HELP_RESET_PORT]); cfga_msg(msgp, sata_help[HELP_RESET_DEVICE]); cfga_msg(msgp, sata_help[HELP_RESET_ALL]); cfga_msg(msgp, sata_help[HELP_PORT_ACTIVATE]); cfga_msg(msgp, sata_help[HELP_PORT_DEACTIVATE]); cfga_msg(msgp, sata_help[HELP_PORT_SELF_TEST]); cfga_msg(msgp, sata_help[HELP_CNTRL_SELF_TEST]); return (CFGA_OK); } /* * Ensure the ap_id passed is in the correct (physical ap_id) form: * path/device:xx[.xx] * where xx is a one or two-digit number. * * Note the library always calls the plugin with a physical ap_id. */ static int verify_valid_apid(const char *ap_id) { char *l_ap_id; if (ap_id == NULL) return (-1); l_ap_id = strrchr(ap_id, (int)*MINOR_SEP); l_ap_id++; if (strspn(l_ap_id, "0123456789.") != strlen(l_ap_id)) { /* Bad characters in the ap_id */ return (-1); } if (strstr(l_ap_id, "..") != NULL) { /* ap_id has 1..2 or more than 2 dots */ return (-1); } return (0); } /* * Verify the params passed in are valid. */ static cfga_sata_ret_t verify_params( const char *ap_id, const char *options, char **errstring) { char *pdyn, *lap_id; int rv; if (errstring != NULL) { *errstring = NULL; } if (options != NULL) { return (CFGA_SATA_OPTIONS); } /* Strip dynamic AP name component if it is present. */ lap_id = strdup(ap_id); if (lap_id == NULL) { return (CFGA_SATA_ALLOC_FAIL); } if ((pdyn = GET_DYN(lap_id)) != NULL) { *pdyn = '\0'; } if (verify_valid_apid(lap_id) != 0) { rv = CFGA_SATA_AP; } else { rv = CFGA_SATA_OK; } free(lap_id); return (rv); } /* * Takes a validated ap_id and extracts the port number. * Port multiplier is supported now. */ static cfga_sata_ret_t get_port_num(const char *ap_id, uint32_t *port) { uint32_t cport, pmport = 0, qual = 0; char *cport_str, *pmport_str; /* Get the cport number */ cport_str = strrchr(ap_id, (int)*MINOR_SEP) + strlen(MINOR_SEP); errno = 0; cport = strtol(cport_str, NULL, 10); if ((cport & ~SATA_CFGA_CPORT_MASK) != 0 || errno != 0) { return (CFGA_SATA_PORT); } /* Get pmport number if there is a PORT_SEPARATOR */ errno = 0; if ((pmport_str = strrchr(ap_id, (int)*PORT_SEPARATOR)) != 0) { pmport_str += strlen(PORT_SEPARATOR); pmport = strtol(pmport_str, NULL, 10); qual = SATA_CFGA_PMPORT_QUAL; if ((pmport & ~SATA_CFGA_PMPORT_MASK) != 0 || errno != 0) { return (CFGA_SATA_PORT); } } *port = cport | (pmport << SATA_CFGA_PMPORT_SHIFT) | qual; return (CFGA_SATA_OK); } /* * Pair of routines to set up for/clean up after a devctl_ap_* lib call. */ static void cleanup_after_devctl_cmd(devctl_hdl_t devctl_hdl, nvlist_t *user_nvlist) { if (user_nvlist != NULL) { nvlist_free(user_nvlist); } if (devctl_hdl != NULL) { devctl_release(devctl_hdl); } } static cfga_sata_ret_t setup_for_devctl_cmd( const char *ap_id, devctl_hdl_t *devctl_hdl, nvlist_t **user_nvlistp, uint_t oflag) { uint_t port; cfga_sata_ret_t rv = CFGA_SATA_OK; char *lap_id, *pdyn; lap_id = strdup(ap_id); if (lap_id == NULL) return (CFGA_SATA_ALLOC_FAIL); if ((pdyn = GET_DYN(lap_id)) != NULL) { *pdyn = '\0'; } /* Get a devctl handle to pass to the devctl_ap_XXX functions */ if ((*devctl_hdl = devctl_ap_acquire((char *)lap_id, oflag)) == NULL) { (void) fprintf(stderr, "[libcfgadm:sata] " "setup_for_devctl_cmd: devctl_ap_acquire failed: %s\n", strerror(errno)); rv = CFGA_SATA_DEVCTL; goto bailout; } /* Set up nvlist to pass the port number down to the driver */ if (nvlist_alloc(user_nvlistp, NV_UNIQUE_NAME_TYPE, NULL) != 0) { *user_nvlistp = NULL; rv = CFGA_SATA_NVLIST; (void) printf("nvlist_alloc failed\n"); goto bailout; } /* * Get port id, for Port Multiplier port, things could be a little bit * complicated because of "port.port" format in ap_id, thus for * port multiplier port, port number should be coded as 32bit int * with the sig 16 bit as sata channel number, least 16 bit as * the port number of sata port multiplier port. */ if ((rv = get_port_num(lap_id, &port)) != CFGA_SATA_OK) { (void) printf( "setup_for_devctl_cmd: get_port_num, errno: %d\n", errno); goto bailout; } /* Creates an int32_t entry */ if (nvlist_add_int32(*user_nvlistp, PORT, port) == -1) { (void) printf("nvlist_add_int32 failed\n"); rv = CFGA_SATA_NVLIST; goto bailout; } free(lap_id); return (rv); bailout: free(lap_id); (void) cleanup_after_devctl_cmd(*devctl_hdl, *user_nvlistp); return (rv); } static cfga_sata_ret_t port_state(devctl_hdl_t hdl, nvlist_t *list, ap_rstate_t *rstate, ap_ostate_t *ostate) { devctl_ap_state_t devctl_ap_state; if (devctl_ap_getstate(hdl, list, &devctl_ap_state) == -1) { (void) printf("devctl_ap_getstate failed, errno: %d\n", errno); return (CFGA_SATA_IOCTL); } *rstate = devctl_ap_state.ap_rstate; *ostate = devctl_ap_state.ap_ostate; return (CFGA_SATA_OK); } /* * Given a subcommand to the DEVCTL_AP_CONTROL ioctl, rquest the size of * the data to be returned, allocate a buffer, then get the data. * Returns *descrp (which must be freed) and size. * * Note SATA_DESCR_TYPE_STRING returns an ASCII NULL-terminated string, * not a string descr. */ cfga_sata_ret_t do_control_ioctl(const char *ap_id, sata_cfga_apctl_t subcommand, uint_t arg, void **descrp, size_t *sizep) { int fd = -1; uint_t port; uint32_t local_size; cfga_sata_ret_t rv = CFGA_SATA_OK; struct sata_ioctl_data ioctl_data; assert(descrp != NULL); *descrp = NULL; assert(sizep != NULL); if ((rv = get_port_num(ap_id, &port)) != CFGA_SATA_OK) { goto bailout; } if ((fd = open(ap_id, O_RDONLY)) == -1) { (void) printf("do_control_ioctl: open failed: errno:%d\n", errno); rv = CFGA_SATA_OPEN; if (errno == EBUSY) { rv = CFGA_SATA_BUSY; } goto bailout; } ioctl_data.cmd = subcommand; ioctl_data.port = port; ioctl_data.misc_arg = (uint_t)arg; /* * Find out how large a buf we need to get the data. * Note the ioctls only accept/return a 32-bit int for a get_size * to avoid 32/64 and BE/LE issues. */ if ((subcommand == SATA_CFGA_GET_AP_TYPE) || (subcommand == SATA_CFGA_GET_DEVICE_PATH) || (subcommand == SATA_CFGA_GET_MODEL_INFO) || (subcommand == SATA_CFGA_GET_REVFIRMWARE_INFO) || (subcommand == SATA_CFGA_GET_SERIALNUMBER_INFO)) { ioctl_data.get_size = B_TRUE; ioctl_data.buf = (caddr_t)&local_size; ioctl_data.bufsiz = sizeof (local_size); if (ioctl(fd, DEVCTL_AP_CONTROL, &ioctl_data) != 0) { perror("ioctl failed (size)"); rv = CFGA_SATA_IOCTL; goto bailout; } *sizep = local_size; if (local_size == 0) { (void) printf("zero length data\n"); rv = CFGA_SATA_ZEROLEN; goto bailout; } if ((*descrp = malloc(*sizep)) == NULL) { (void) printf("do_control_ioctl: malloc failed\n"); rv = CFGA_SATA_ALLOC_FAIL; goto bailout; } } else { *sizep = 0; } ioctl_data.get_size = B_FALSE; ioctl_data.buf = *descrp; ioctl_data.bufsiz = *sizep; /* Execute IOCTL */ if (ioctl(fd, DEVCTL_AP_CONTROL, &ioctl_data) != 0) { rv = CFGA_SATA_IOCTL; goto bailout; } (void) close(fd); return (rv); bailout: if (fd != -1) { (void) close(fd); } if (*descrp != NULL) { free(*descrp); *descrp = NULL; } if (rv == CFGA_SATA_IOCTL && errno == EBUSY) { rv = CFGA_SATA_BUSY; } return (rv); } static int sata_confirm(struct cfga_confirm *confp, char *msg) { int rval; if (confp == NULL || confp->confirm == NULL) { return (0); } rval = (*confp->confirm)(confp->appdata_ptr, msg); return (rval); } static char * sata_get_devicepath(const char *ap_id) { char *devpath = NULL; size_t size; cfga_sata_ret_t rv; rv = do_control_ioctl(ap_id, SATA_CFGA_GET_DEVICE_PATH, NULL, (void **)&devpath, &size); if (rv == CFGA_SATA_OK) { return (devpath); } else { return ((char *)NULL); } }